V4L/DVB (6691): pvrusb2: Rework pipeline state control

This is a new implementation for video pipeline control within the
pvrusb2 driver.  Actual start/stop of the pipeline is moved to the
driver's kernel thread.  Pipeline stages are controlled autonomously
based on surrounding pipeline or application control state.  Kernel
thread management is also cleaned up and moved into the internal
control structure of the driver, solving a set up / tear down race
along the way.  Better failure recovery is implemented with this new
control strategy.  Also with this change comes better control of the
cx23416 encoder, building on additional information learned about the
peculiarities of controlling this part (this information was the
original trigger for this rework).  With this change, overall encoder
stability should be considerably improved.  Yes, this is a large
change for this driver, but due to the nature of the feature being
worked on, the changes are fairly pervasive and would be difficult to
break into smaller pieces with any semblence of step-wise stability.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 50 insertions, 14 deletions

diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
index f873994b088..8ee4549b7a9 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
@@ -35,6 +35,7 @@
 
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
+#include <linux/workqueue.h>
 #include <linux/mutex.h>
 #include "pvrusb2-hdw.h"
 #include "pvrusb2-io.h"
@@ -179,6 +180,12 @@ struct pvr2_hdw {
 	/* Device type, one of PVR2_HDW_TYPE_xxxxx */
 	unsigned int hdw_type;
 
+	/* Kernel worker thread handling */
+	struct workqueue_struct *workqueue;
+	struct work_struct workpoll;     /* Update driver state */
+	struct work_struct worki2csync;  /* Update i2c clients */
+	struct work_struct workinit;     /* Driver initialization sequence */
+
 	/* Video spigot */
 	struct pvr2_stream *vid_stream;
 
@@ -186,9 +193,6 @@ struct pvr2_hdw {
 	struct mutex big_lock_mutex;
 	int big_lock_held;  /* For debugging */
 
-	void (*poll_trigger_func)(void *);
-	void *poll_trigger_data;
-
 	char name[32];
 
 	/* I2C stuff */
@@ -225,14 +229,48 @@ struct pvr2_hdw {
 	unsigned int cmd_debug_write_len;  //
 	unsigned int cmd_debug_read_len;   //
 
+	/* Bits of state that describe what is going on with various parts
+	   of the driver. */
+	volatile int state_encoder_ok;         /* Encoder is operational */
+	volatile int state_encoder_run;        /* Encoder is running */
+	volatile int state_encoder_config;     /* Encoder is configured */
+	volatile int state_encoder_waitok;     /* Encoder pre-wait done */
+	volatile int state_decoder_run;        /* Decoder is running */
+	volatile int state_usbstream_run;      /* FX2 is streaming */
+	volatile int state_decoder_quiescent;  /* Decoder idle for > 50msec */
+	volatile int state_pipeline_config;    /* Pipeline is configured */
+	int state_pipeline_req;                /* Somebody wants to stream */
+	int state_pipeline_pause;              /* Pipeline must be paused */
+	int state_pipeline_idle;               /* Pipeline not running */
+
+	/* This is the master state of the driver.  It is the combined
+	   result of other bits of state.  Examining this will indicate the
+	   overall state of the driver.  Values here are one of
+	   PVR2_STATE_xxxx */
+	unsigned int master_state;
+
+	/* True if states must be re-evaluated */
+	int state_stale;
+
+	void (*state_func)(void *);
+	void *state_data;
+
+	/* Timer for measuring decoder settling time */
+	struct timer_list quiescent_timer;
+
+	/* Timer for measuring encoder pre-wait time */
+	struct timer_list encoder_wait_timer;
+
+	/* Place to block while waiting for state changes */
+	wait_queue_head_t state_wait_data;
+
+
 	int flag_ok;            /* device in known good state */
 	int flag_disconnected;  /* flag_ok == 0 due to disconnect */
 	int flag_init_ok;       /* true if structure is fully initialized */
-	int flag_streaming_enabled; /* true if streaming should be on */
 	int fw1_state;          /* current situation with fw1 */
-	int flag_encoder_ok;    /* True if encoder is healthy */
-
-	int flag_decoder_is_tuned;
+	int flag_decoder_missed;/* We've noticed missing decoder */
+	int flag_tripped;       /* Indicates overall failure to start */
 
 	struct pvr2_decoder_ctrl *decoder_ctrl;
 
@@ -241,12 +279,6 @@ struct pvr2_hdw {
 	unsigned int fw_size;
 	int fw_cpu_flag; /* True if we are dealing with the CPU */
 
-	// Which subsystem pieces have been enabled / configured
-	unsigned long subsys_enabled_mask;
-
-	// Which subsystems are manipulated to enable streaming
-	unsigned long subsys_stream_mask;
-
 	// True if there is a request to trigger logging of state in each
 	// module.
 	int log_requested;
@@ -296,13 +328,16 @@ struct pvr2_hdw {
 	/* Location of eeprom or a negative number if none */
 	int eeprom_addr;
 
-	enum pvr2_config config;
+	enum pvr2_config active_stream_type;
+	enum pvr2_config desired_stream_type;
 
 	/* Control state needed for cx2341x module */
 	struct cx2341x_mpeg_params enc_cur_state;
 	struct cx2341x_mpeg_params enc_ctl_state;
 	/* True if an encoder attribute has changed */
 	int enc_stale;
+	/* True if an unsafe encoder attribute has changed */
+	int enc_unsafe_stale;
 	/* True if enc_cur_state is valid */
 	int enc_cur_valid;
 
@@ -332,6 +367,7 @@ struct pvr2_hdw {
 
 /* This function gets the current frequency */
 unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *);
+void pvr2_hdw_set_decoder(struct pvr2_hdw *,struct pvr2_decoder_ctrl *);
 
 #endif /* __PVRUSB2_HDW_INTERNAL_H */