MERGE-via-pending-tracking-hist-MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141

pending-tracking-hist top was MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141 / fdf777a63bcb59e0dfd78bfe2c6242e01f6d4eb9 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040

stable-tracking-hist top was MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040 / 90463bfd2d5a3c8b52f6e6d71024a00e052b0ced ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-mokopatches-tracking-hist-fix-stray-endmenu-patch

mokopatches-tracking-hist top was fix-stray-endmenu-patch / 3630e0be570de8057e7f8d2fe501ed353cdf34e6 ... parent commitmessage:
From: Andy Green <andy@openmoko.com>
fix-stray-endmenu.patch

Signed-off-by: Andy Green <andy@openmoko.com>

31 files changed, 5941 insertions, 1547 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1ab10dba8c8..3817728fec6 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -34,6 +34,14 @@ config MFD_ASIC3
 	  This driver supports the ASIC3 multifunction chip found on many
 	  PDAs (mainly iPAQ and HTC based ones)
 
+config MFD_DM355EVM_MSP
+	bool "DaVinci DM355 EVM microcontroller"
+	depends on I2C && MACH_DAVINCI_DM355_EVM
+	help
+	  This driver supports the MSP430 microcontroller used on these
+	  boards.  MSP430 firmware manages resets and power sequencing,
+	  inputs from buttons and the IR remote, LEDs, an RTC, and more.
+
 config HTC_EGPIO
 	bool "HTC EGPIO support"
 	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
@@ -61,9 +69,32 @@ config UCB1400_CORE
 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_core.
 
+config TPS65010
+	tristate "TPS6501x Power Management chips"
+	depends on I2C && GPIOLIB
+	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
+	help
+	  If you say yes here you get support for the TPS6501x series of
+	  Power Management chips.  These include voltage regulators,
+	  lithium ion/polymer battery charging, and other features that
+	  are often used in portable devices like cell phones and cameras.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tps65010.
+
+config MENELAUS
+	bool "Texas Instruments TWL92330/Menelaus PM chip"
+	depends on I2C=y && ARCH_OMAP24XX
+	help
+	  If you say yes here you get support for the Texas Instruments
+	  TWL92330/Menelaus Power Management chip. This include voltage
+	  regulators, Dual slot memory card tranceivers, real-time clock
+	  and other features that are often used in portable devices like
+	  cell phones and PDAs.
+
 config TWL4030_CORE
 	bool "Texas Instruments TWL4030/TPS659x0 Support"
-	depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3)
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  Say yes here if you have TWL4030 family chip on your board.
 	  This core driver provides register access and IRQ handling
@@ -116,6 +147,7 @@ config PMIC_DA903X
 
 config MFD_WM8400
 	tristate "Support Wolfson Microelectronics WM8400"
+	select MFD_CORE
 	depends on I2C
 	help
 	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -142,6 +174,38 @@ config MFD_WM8350_CONFIG_MODE_3
 	bool
 	depends on MFD_WM8350
 
+config MFD_WM8351_CONFIG_MODE_0
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_1
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_2
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_3
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_0
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_1
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_2
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_3
+	bool
+	depends on MFD_WM8350
+
 config MFD_WM8350_I2C
 	tristate "Support Wolfson Microelectronics WM8350 with I2C"
 	select MFD_WM8350
@@ -162,7 +226,6 @@ config MFD_PCF50633
 	  facilities, and registers devices for the various functions
 	  so that function-specific drivers can bind to them.
 
-
 config PCF50633_ADC
 	tristate "Support for NXP PCF50633 ADC"
 	depends on MFD_PCF50633
@@ -177,29 +240,6 @@ config PCF50633_GPIO
 	 Say yes here if you want to include support GPIO for pins on
 	 the PCF50633 chip.
 
-config MFD_PCF50606
-	tristate "Support for NXP PCF50606"
-	depends on I2C
-	help
-	  Say yes here if you have NXP PCF50606 chip on your board.
-	  This core driver provides register access and IRQ handling
-	  facilities, and registers devices for the various functions
-	  so that function-specific drivers can bind to them.
-
-config PCF50606_ADC
-	tristate "Support for NXP PCF50606 ADC"
-	depends on MFD_PCF50606
-	help
-	 Say yes here if you want to include support for ADC in the
-	 NXP PCF50606 chip.
-
-config PCF50606_GPO
-	tristate "Support for NXP PCF50606 GPO"
-	depends on MFD_PCF50606
-	help
-	 Say yes here if you want to include support GPO for pins on
-	 the PCF50606 chip.
-
 source "drivers/mfd/glamo/Kconfig"
 
 endmenu
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f6a769c8eff..e9711fd3c4b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -9,6 +9,8 @@ obj-$(CONFIG_MFD_GLAMO)		+= glamo/
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
 
+obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
+
 obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o
 obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o
 obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
@@ -18,6 +20,9 @@ wm8350-objs			:= wm8350-core.o wm8350-regmap.o wm8350-gpio.o
 obj-$(CONFIG_MFD_WM8350)	+= wm8350.o
 obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
 
+obj-$(CONFIG_TPS65010)		+= tps65010.o
+obj-$(CONFIG_MENELAUS)		+= menelaus.o
+
 obj-$(CONFIG_TWL4030_CORE)	+= twl4030-core.o twl4030-irq.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
@@ -36,9 +41,4 @@ obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
 
 obj-$(CONFIG_MFD_PCF50633)	+= pcf50633-core.o
 obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
-obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
-
-obj-$(CONFIG_MFD_PCF50606)	+= pcf50606-core.o
-obj-$(CONFIG_PCF50606_ADC)	+= pcf50606-adc.o
-obj-$(CONFIG_PCF50606_GPO)	+= pcf50606-gpo.o
-
+obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
\ No newline at end of file
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index e4c0db4dc7b..9e485459f63 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -474,9 +474,9 @@ static __init int asic3_gpio_probe(struct platform_device *pdev,
 	u16 dir_reg[ASIC3_NUM_GPIO_BANKS];
 	int i;
 
-	memzero(alt_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
-	memzero(out_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
-	memzero(dir_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
+	memset(alt_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
+	memset(out_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
+	memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
 
 	/* Enable all GPIOs */
 	asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, MASK), 0xffff);
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index b57326ae464..99f8dcfe3d9 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -151,12 +151,24 @@ int da903x_write(struct device *dev, int reg, uint8_t val)
 }
 EXPORT_SYMBOL_GPL(da903x_write);
 
+int da903x_writes(struct device *dev, int reg, int len, uint8_t *val)
+{
+	return __da903x_writes(to_i2c_client(dev), reg, len, val);
+}
+EXPORT_SYMBOL_GPL(da903x_writes);
+
 int da903x_read(struct device *dev, int reg, uint8_t *val)
 {
 	return __da903x_read(to_i2c_client(dev), reg, val);
 }
 EXPORT_SYMBOL_GPL(da903x_read);
 
+int da903x_reads(struct device *dev, int reg, int len, uint8_t *val)
+{
+	return __da903x_reads(to_i2c_client(dev), reg, len, val);
+}
+EXPORT_SYMBOL_GPL(da903x_reads);
+
 int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask)
 {
 	struct da903x_chip *chip = dev_get_drvdata(dev);
@@ -267,7 +279,7 @@ static int da9030_mask_events(struct da903x_chip *chip, unsigned int events)
 {
 	uint8_t v[3];
 
-	chip->events_mask &= ~events;
+	chip->events_mask |= events;
 
 	v[0] = (chip->events_mask & 0xff);
 	v[1] = (chip->events_mask >> 8) & 0xff;
@@ -435,13 +447,13 @@ static const struct i2c_device_id da903x_id_table[] = {
 };
 MODULE_DEVICE_TABLE(i2c, da903x_id_table);
 
-static int __devexit __remove_subdev(struct device *dev, void *unused)
+static int __remove_subdev(struct device *dev, void *unused)
 {
 	platform_device_unregister(to_platform_device(dev));
 	return 0;
 }
 
-static int __devexit da903x_remove_subdevs(struct da903x_chip *chip)
+static int da903x_remove_subdevs(struct da903x_chip *chip)
 {
 	return device_for_each_child(chip->dev, NULL, __remove_subdev);
 }
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
new file mode 100644
index 00000000000..7ac12cb0be4
--- /dev/null
+++ b/drivers/mfd/dm355evm_msp.c
@@ -0,0 +1,430 @@
+/*
+ * dm355evm_msp.c - driver for MSP430 firmware on DM355EVM board
+ *
+ * Copyright (C) 2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/i2c.h>
+#include <linux/i2c/dm355evm_msp.h>
+
+
+/*
+ * The DM355 is a DaVinci chip with video support but no C64+ DSP.  Its
+ * EVM board has an MSP430 programmed with firmware for various board
+ * support functions.  This driver exposes some of them directly, and
+ * supports other drivers (e.g. RTC, input) for more complex access.
+ *
+ * Because this firmware is entirely board-specific, this file embeds
+ * knowledge that would be passed as platform_data in a generic driver.
+ *
+ * This driver was tested with firmware revision A4.
+ */
+
+#if defined(CONFIG_KEYBOARD_DM355EVM) \
+		|| defined(CONFIG_KEYBOARD_DM355EVM_MODULE)
+#define msp_has_keyboard()	true
+#else
+#define msp_has_keyboard()	false
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#define msp_has_leds()		true
+#else
+#define msp_has_leds()		false
+#endif
+
+#if defined(CONFIG_RTC_DRV_DM355EVM) || defined(CONFIG_RTC_DRV_DM355EVM_MODULE)
+#define msp_has_rtc()		true
+#else
+#define msp_has_rtc()		false
+#endif
+
+#if defined(CONFIG_VIDEO_TVP514X) || defined(CONFIG_VIDEO_TVP514X_MODULE)
+#define msp_has_tvp()		true
+#else
+#define msp_has_tvp()		false
+#endif
+
+
+/*----------------------------------------------------------------------*/
+
+/* REVISIT for paranoia's sake, retry reads/writes on error */
+
+static struct i2c_client *msp430;
+
+/**
+ * dm355evm_msp_write - Writes a register in dm355evm_msp
+ * @value: the value to be written
+ * @reg: register address
+ *
+ * Returns result of operation - 0 is success, else negative errno
+ */
+int dm355evm_msp_write(u8 value, u8 reg)
+{
+	return i2c_smbus_write_byte_data(msp430, reg, value);
+}
+EXPORT_SYMBOL(dm355evm_msp_write);
+
+/**
+ * dm355evm_msp_read - Reads a register from dm355evm_msp
+ * @reg: register address
+ *
+ * Returns result of operation - value, or negative errno
+ */
+int dm355evm_msp_read(u8 reg)
+{
+	return i2c_smbus_read_byte_data(msp430, reg);
+}
+EXPORT_SYMBOL(dm355evm_msp_read);
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Many of the msp430 pins are just used as fixed-direction GPIOs.
+ * We could export a few more of them this way, if we wanted.
+ */
+#define MSP_GPIO(bit,reg)	((DM355EVM_MSP_ ## reg) << 3 | (bit))
+
+static const u8 msp_gpios[] = {
+	/* eight leds */
+	MSP_GPIO(0, LED), MSP_GPIO(1, LED),
+	MSP_GPIO(2, LED), MSP_GPIO(3, LED),
+	MSP_GPIO(4, LED), MSP_GPIO(5, LED),
+	MSP_GPIO(6, LED), MSP_GPIO(7, LED),
+	/* SW6 and the NTSC/nPAL jumper */
+	MSP_GPIO(0, SWITCH1), MSP_GPIO(1, SWITCH1),
+	MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1),
+	MSP_GPIO(4, SWITCH1),
+	/* switches on MMC/SD sockets */
+	MSP_GPIO(1, SDMMC), MSP_GPIO(2, SDMMC),	/* mmc0 WP, nCD */
+	MSP_GPIO(3, SDMMC), MSP_GPIO(4, SDMMC),	/* mmc1 WP, nCD */
+};
+
+#define MSP_GPIO_REG(offset)	(msp_gpios[(offset)] >> 3)
+#define MSP_GPIO_MASK(offset)	BIT(msp_gpios[(offset)] & 0x07)
+
+static int msp_gpio_in(struct gpio_chip *chip, unsigned offset)
+{
+	switch (MSP_GPIO_REG(offset)) {
+	case DM355EVM_MSP_SWITCH1:
+	case DM355EVM_MSP_SWITCH2:
+	case DM355EVM_MSP_SDMMC:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static u8 msp_led_cache;
+
+static int msp_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	int reg, status;
+
+	reg = MSP_GPIO_REG(offset);
+	status = dm355evm_msp_read(reg);
+	if (status < 0)
+		return status;
+	if (reg == DM355EVM_MSP_LED)
+		msp_led_cache = status;
+	return status & MSP_GPIO_MASK(offset);
+}
+
+static int msp_gpio_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+	int mask, bits;
+
+	/* NOTE:  there are some other signals that could be
+	 * packaged as output GPIOs, but they aren't as useful
+	 * as the LEDs ... so for now we don't.
+	 */
+	if (MSP_GPIO_REG(offset) != DM355EVM_MSP_LED)
+		return -EINVAL;
+
+	mask = MSP_GPIO_MASK(offset);
+	bits = msp_led_cache;
+
+	bits &= ~mask;
+	if (value)
+		bits |= mask;
+	msp_led_cache = bits;
+
+	return dm355evm_msp_write(bits, DM355EVM_MSP_LED);
+}
+
+static void msp_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	msp_gpio_out(chip, offset, value);
+}
+
+static struct gpio_chip dm355evm_msp_gpio = {
+	.label			= "dm355evm_msp",
+	.owner			= THIS_MODULE,
+	.direction_input	= msp_gpio_in,
+	.get			= msp_gpio_get,
+	.direction_output	= msp_gpio_out,
+	.set			= msp_gpio_set,
+	.base			= -EINVAL,		/* dynamic assignment */
+	.ngpio			= ARRAY_SIZE(msp_gpios),
+	.can_sleep		= true,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct device *add_child(struct i2c_client *client, const char *name,
+		void *pdata, unsigned pdata_len,
+		bool can_wakeup, int irq)
+{
+	struct platform_device	*pdev;
+	int			status;
+
+	pdev = platform_device_alloc(name, -1);
+	if (!pdev) {
+		dev_dbg(&client->dev, "can't alloc dev\n");
+		status = -ENOMEM;
+		goto err;
+	}
+
+	device_init_wakeup(&pdev->dev, can_wakeup);
+	pdev->dev.parent = &client->dev;
+
+	if (pdata) {
+		status = platform_device_add_data(pdev, pdata, pdata_len);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "can't add platform_data\n");
+			goto err;
+		}
+	}
+
+	if (irq) {
+		struct resource r = {
+			.start = irq,
+			.flags = IORESOURCE_IRQ,
+		};
+
+		status = platform_device_add_resources(pdev, &r, 1);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "can't add irq\n");
+			goto err;
+		}
+	}
+
+	status = platform_device_add(pdev);
+
+err:
+	if (status < 0) {
+		platform_device_put(pdev);
+		dev_err(&client->dev, "can't add %s dev\n", name);
+		return ERR_PTR(status);
+	}
+	return &pdev->dev;
+}
+
+static int add_children(struct i2c_client *client)
+{
+	static const struct {
+		int offset;
+		char *label;
+	} config_inputs[] = {
+		/* 8 == right after the LEDs */
+		{ 8 + 0, "sw6_1", },
+		{ 8 + 1, "sw6_2", },
+		{ 8 + 2, "sw6_3", },
+		{ 8 + 3, "sw6_4", },
+		{ 8 + 4, "NTSC/nPAL", },
+	};
+
+	struct device	*child;
+	int		status;
+	int		i;
+
+	/* GPIO-ish stuff */
+	dm355evm_msp_gpio.dev = &client->dev;
+	status = gpiochip_add(&dm355evm_msp_gpio);
+	if (status < 0)
+		return status;
+
+	/* LED output */
+	if (msp_has_leds()) {
+#define GPIO_LED(l)	.name = l, .active_low = true
+		static struct gpio_led evm_leds[] = {
+			{ GPIO_LED("dm355evm::ds14"),
+				.default_trigger = "heartbeat", },
+			{ GPIO_LED("dm355evm::ds15"),
+				.default_trigger = "mmc0", },
+			{ GPIO_LED("dm355evm::ds16"),
+				/* could also be a CE-ATA drive */
+				.default_trigger = "mmc1", },
+			{ GPIO_LED("dm355evm::ds17"),
+				.default_trigger = "nand-disk", },
+			{ GPIO_LED("dm355evm::ds18"), },
+			{ GPIO_LED("dm355evm::ds19"), },
+			{ GPIO_LED("dm355evm::ds20"), },
+			{ GPIO_LED("dm355evm::ds21"), },
+		};
+#undef GPIO_LED
+
+		struct gpio_led_platform_data evm_led_data = {
+			.num_leds	= ARRAY_SIZE(evm_leds),
+			.leds		= evm_leds,
+		};
+
+		for (i = 0; i < ARRAY_SIZE(evm_leds); i++)
+			evm_leds[i].gpio = i + dm355evm_msp_gpio.base;
+
+		/* NOTE:  these are the only fully programmable LEDs
+		 * on the board, since GPIO-61/ds22 (and many signals
+		 * going to DC7) must be used for AEMIF address lines
+		 * unless the top 1 GB of NAND is unused...
+		 */
+		child = add_child(client, "leds-gpio",
+				&evm_led_data, sizeof(evm_led_data),
+				false, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
+	/* configuration inputs */
+	for (i = 0; i < ARRAY_SIZE(config_inputs); i++) {
+		int gpio = dm355evm_msp_gpio.base + config_inputs[i].offset;
+
+		gpio_request(gpio, config_inputs[i].label);
+		gpio_direction_input(gpio);
+
+		/* make it easy for userspace to see these */
+		gpio_export(gpio, false);
+	}
+
+	/* MMC/SD inputs -- right after the last config input */
+	if (client->dev.platform_data) {
+		void (*mmcsd_setup)(unsigned) = client->dev.platform_data;
+
+		mmcsd_setup(dm355evm_msp_gpio.base + 8 + 5);
+	}
+
+	/* RTC is a 32 bit counter, no alarm */
+	if (msp_has_rtc()) {
+		child = add_child(client, "rtc-dm355evm",
+				NULL, 0, false, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
+	/* input from buttons and IR remote (uses the IRQ) */
+	if (msp_has_keyboard()) {
+		child = add_child(client, "dm355evm_keys",
+				NULL, 0, true, client->irq);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
+	return 0;
+}
+
+/*----------------------------------------------------------------------*/
+
+static void dm355evm_command(unsigned command)
+{
+	int status;
+
+	status = dm355evm_msp_write(command, DM355EVM_MSP_COMMAND);
+	if (status < 0)
+		dev_err(&msp430->dev, "command %d failure %d\n",
+				command, status);
+}
+
+static void dm355evm_power_off(void)
+{
+	dm355evm_command(MSP_COMMAND_POWEROFF);
+}
+
+static int dm355evm_msp_remove(struct i2c_client *client)
+{
+	pm_power_off = NULL;
+	msp430 = NULL;
+	return 0;
+}
+
+static int
+dm355evm_msp_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	int		status;
+	const char	*video = msp_has_tvp() ? "TVP5146" : "imager";
+
+	if (msp430)
+		return -EBUSY;
+	msp430 = client;
+
+	/* display revision status; doubles as sanity check */
+	status = dm355evm_msp_read(DM355EVM_MSP_FIRMREV);
+	if (status < 0)
+		goto fail;
+	dev_info(&client->dev, "firmware v.%02X, %s as video-in\n",
+			status, video);
+
+	/* mux video input:  either tvp5146 or some external imager */
+	status = dm355evm_msp_write(msp_has_tvp() ? 0 : MSP_VIDEO_IMAGER,
+			DM355EVM_MSP_VIDEO_IN);
+	if (status < 0)
+		dev_warn(&client->dev, "error %d muxing %s as video-in\n",
+			status, video);
+
+	/* init LED cache, and turn off the LEDs */
+	msp_led_cache = 0xff;
+	dm355evm_msp_write(msp_led_cache, DM355EVM_MSP_LED);
+
+	/* export capabilities we support */
+	status = add_children(client);
+	if (status < 0)
+		goto fail;
+
+	/* PM hookup */
+	pm_power_off = dm355evm_power_off;
+
+	return 0;
+
+fail:
+	/* FIXME remove children ... */
+	dm355evm_msp_remove(client);
+	return status;
+}
+
+static const struct i2c_device_id dm355evm_msp_ids[] = {
+	{ "dm355evm_msp", 0 },
+	{ /* end of list */ },
+};
+MODULE_DEVICE_TABLE(i2c, dm355evm_msp_ids);
+
+static struct i2c_driver dm355evm_msp_driver = {
+	.driver.name	= "dm355evm_msp",
+	.id_table	= dm355evm_msp_ids,
+	.probe		= dm355evm_msp_probe,
+	.remove		= dm355evm_msp_remove,
+};
+
+static int __init dm355evm_msp_init(void)
+{
+	return i2c_add_driver(&dm355evm_msp_driver);
+}
+subsys_initcall(dm355evm_msp_init);
+
+static void __exit dm355evm_msp_exit(void)
+{
+	i2c_del_driver(&dm355evm_msp_driver);
+}
+module_exit(dm355evm_msp_exit);
+
+MODULE_DESCRIPTION("Interface to MSP430 firmware on DM355EVM");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/glamo/glamo-core.c b/drivers/mfd/glamo/glamo-core.c
index b4595a8202d..b7184a38c31 100644
--- a/drivers/mfd/glamo/glamo-core.c
+++ b/drivers/mfd/glamo/glamo-core.c
@@ -288,9 +288,15 @@ static struct resource glamo_mmc_resources[] = {
 	},
 };
 
+static struct platform_device glamo_mmc_dev = {
+	.name		= "glamo-mci",
+	.resource	= glamo_mmc_resources,
+	.num_resources	= ARRAY_SIZE(glamo_mmc_resources),
+};
+
 struct glamo_mci_pdata glamo_mci_def_pdata = {
 	.gpio_detect		= 0,
-	.glamo_can_set_mci_power	= NULL, /* filled in from MFD platform data */
+	.glamo_set_mci_power	= NULL, /* filled in from MFD platform data */
 	.ocr_avail	= MMC_VDD_20_21 |
 			  MMC_VDD_21_22 |
 			  MMC_VDD_22_23 |
@@ -1147,7 +1153,6 @@ static int __init glamo_probe(struct platform_device *pdev)
 {
 	int rc = 0, irq;
 	struct glamo_core *glamo;
-	struct platform_device *glamo_mmc_dev;
 
 	if (glamo_handle) {
 		dev_err(&pdev->dev,
@@ -1242,8 +1247,8 @@ static int __init glamo_probe(struct platform_device *pdev)
 		 glamo_pll_rate(glamo, GLAMO_PLL2));
 
 	/* bring MCI specific stuff over from our MFD platform data */
-	glamo_mci_def_pdata.glamo_can_set_mci_power =
-					glamo->pdata->glamo_can_set_mci_power;
+	glamo_mci_def_pdata.glamo_set_mci_power =
+					glamo->pdata->glamo_set_mci_power;
 	glamo_mci_def_pdata.glamo_mci_use_slow =
 					glamo->pdata->glamo_mci_use_slow;
 	glamo_mci_def_pdata.glamo_irq_is_wired =
@@ -1283,17 +1288,12 @@ static int __init glamo_probe(struct platform_device *pdev)
 	glamo_spigpio_dev.dev.platform_data = glamo->pdata->spigpio_info;
 	platform_device_register(&glamo_spigpio_dev);
 
-	glamo_mmc_dev = glamo->pdata->mmc_dev;
-	glamo_mmc_dev->name = "glamo-mci";
-	glamo_mmc_dev->dev.parent = &pdev->dev;
-	glamo_mmc_dev->resource = glamo_mmc_resources;
-	glamo_mmc_dev->num_resources = ARRAY_SIZE(glamo_mmc_resources); 
-
+	glamo_mmc_dev.dev.parent = &pdev->dev;
 	/* we need it later to give to the engine enable and disable */
 	glamo_mci_def_pdata.pglamo = glamo;
-	mangle_mem_resources(glamo_mmc_dev->resource,
-			     glamo_mmc_dev->num_resources, glamo->mem);
-	platform_device_register(glamo_mmc_dev);
+	mangle_mem_resources(glamo_mmc_dev.resource,
+			     glamo_mmc_dev.num_resources, glamo->mem);
+	platform_device_register(&glamo_mmc_dev);
 
 	/* only request the generic, hostbus and memory controller MMIO */
 	glamo->mem = request_mem_region(glamo->mem->start,
@@ -1338,7 +1338,7 @@ static int glamo_remove(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, NULL);
 	platform_device_unregister(&glamo_fb_dev);
-	platform_device_unregister(glamo->pdata->mmc_dev);
+	platform_device_unregister(&glamo_mmc_dev);
 	iounmap(glamo->base);
 	release_mem_region(glamo->mem->start, GLAMO_REGOFS_VIDCAP);
 	glamo_handle = NULL;
diff --git a/drivers/mfd/glamo/glamo-core.h b/drivers/mfd/glamo/glamo-core.h
index 8e09564bc3f..0705204c6bb 100644
--- a/drivers/mfd/glamo/glamo-core.h
+++ b/drivers/mfd/glamo/glamo-core.h
@@ -68,7 +68,8 @@ struct glamo_mci_pdata {
 	unsigned int	gpio_detect;
 	unsigned int	gpio_wprotect;
 	unsigned long	ocr_avail;
-	int		(*glamo_can_set_mci_power)(void);
+	void		(*glamo_set_mci_power)(unsigned char power_mode,
+				     unsigned short vdd);
 	/* glamo-mci asking if it should use the slow clock to card */
 	int		(*glamo_mci_use_slow)(void);
 	int		(*glamo_irq_is_wired)(void);
diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c
index e836913ea23..b762212041b 100644
--- a/drivers/mfd/glamo/glamo-mci.c
+++ b/drivers/mfd/glamo/glamo-mci.c
@@ -768,24 +768,13 @@ static void glamo_mci_reset(struct glamo_mci_host *host)
 		   glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_MMC);
 }
 #endif
-static inline int glamo_mci_get_mv(int vdd)
-{
-	int mv = 1650;
-
-	if (vdd > 7)
-		mv += 350 + 100 * (vdd - 8);
-
-	return mv;
-}
 
 static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct glamo_mci_host *host = mmc_priv(mmc);
-	struct regulator *regulator;
 	int n = 0;
 	int div;
 	int powering = 0;
-	int mv;
 
 	if (host->suspending) {
 		dev_err(&host->pdev->dev, "IGNORING glamo_mci_set_ios while "
@@ -793,18 +782,10 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		return;
 	}
 
-	regulator = host->regulator;
-
 	/* Set power */
 	switch(ios->power_mode) {
-	case MMC_POWER_UP:
-		if (host->pdata->glamo_can_set_mci_power()) {
-			mv = glamo_mci_get_mv(ios->vdd);
-			regulator_set_voltage(regulator, mv * 1000, mv * 1000);
-			regulator_enable(regulator);
-		}
-		break;
 	case MMC_POWER_ON:
+	case MMC_POWER_UP:
 		/*
 		 * we should use very slow clock until first bulk
 		 * transfer completes OK
@@ -812,11 +793,8 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		host->force_slow_during_powerup = 1;
 
 		if (host->vdd_current != ios->vdd) {
-			if (host->pdata->glamo_can_set_mci_power()) {
-				mv = glamo_mci_get_mv(ios->vdd);
-				regulator_set_voltage(regulator, mv * 1000, mv * 1000);
-				printk(KERN_INFO "SD power -> %dmV\n", mv);
-			}
+			host->pdata->glamo_set_mci_power(ios->power_mode,
+							 ios->vdd);
 			host->vdd_current = ios->vdd;
 		}
 		if (host->power_mode_current == MMC_POWER_OFF) {
@@ -835,7 +813,7 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 		glamo_engine_disable(glamo_mci_def_pdata.pglamo,
 				     GLAMO_ENGINE_MMC);
-		regulator_disable(regulator);
+		host->pdata->glamo_set_mci_power(MMC_POWER_OFF, 0);
 		host->vdd_current = -1;
 		break;
 	}
@@ -940,12 +918,6 @@ static int glamo_mci_probe(struct platform_device *pdev)
 		goto probe_free_mem_region;
 	}
 
-	host->regulator = regulator_get(&pdev->dev, "SD_3V3");
-	if (!host->regulator) {
-		dev_err(&pdev->dev, "Cannot proceed without regulator.\n");
-		return -ENODEV;
-	}
-
 	/* set the handler for our bit of the shared chip irq register */
 	set_irq_handler(IRQ_GLAMO(GLAMO_IRQIDX_MMC), glamo_mci_irq);
 	/* stash host as our handler's private data */
@@ -1033,7 +1005,6 @@ static int glamo_mci_remove(struct platform_device *pdev)
 {
 	struct mmc_host 	*mmc  = platform_get_drvdata(pdev);
 	struct glamo_mci_host 	*host = mmc_priv(mmc);
-	struct regulator *regulator;
 
 	mmc_remove_host(mmc);
 	/* stop using our handler, revert it to default */
@@ -1042,10 +1013,6 @@ static int glamo_mci_remove(struct platform_device *pdev)
 	iounmap(host->base_data);
 	release_mem_region(host->mem->start, RESSIZE(host->mem));
 	release_mem_region(host->mem_data->start, RESSIZE(host->mem_data));
-
-	regulator = host->regulator;
-	regulator_put(regulator);
-	
 	mmc_free_host(mmc);
 
 	glamo_engine_disable(glamo_mci_def_pdata.pglamo, GLAMO_ENGINE_MMC);
diff --git a/drivers/mfd/glamo/glamo-mci.h b/drivers/mfd/glamo/glamo-mci.h
index bd62e9aa3c6..38f6376f438 100644
--- a/drivers/mfd/glamo/glamo-mci.h
+++ b/drivers/mfd/glamo/glamo-mci.h
@@ -10,7 +10,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/regulator/consumer.h>
 
 enum glamo_mci_waitfor {
 	COMPLETION_NONE,
@@ -78,6 +77,4 @@ struct glamo_mci_host {
 
 	unsigned int		ccnt, dcnt;
 	struct tasklet_struct	pio_tasklet;
-
-	struct regulator 	*regulator;
 };
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
index b4ed57e0272..6063dc2b52e 100644
--- a/drivers/mfd/mcp-core.c
+++ b/drivers/mfd/mcp-core.c
@@ -18,7 +18,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 #include <asm/system.h>
 
 #include "mcp.h"
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 28380b20bc7..62b32dabf62 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -20,7 +20,7 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
new file mode 100644
index 00000000000..4b364bae6b3
--- /dev/null
+++ b/drivers/mfd/menelaus.c
@@ -0,0 +1,1285 @@
+/*
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * Some parts based tps65010.c:
+ * Copyright (C) 2004 Texas Instruments and
+ * Copyright (C) 2004-2005 David Brownell
+ *
+ * Some parts based on tlv320aic24.c:
+ * Copyright (C) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * Changes for interrupt handling and clean-up by
+ * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
+ * Cleanup and generalized support for voltage setting by
+ * Juha Yrjola
+ * Added support for controlling VCORE and regulator sleep states,
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Copyright (C) 2005, 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
+
+#define DRIVER_NAME			"menelaus"
+
+#define MENELAUS_I2C_ADDRESS		0x72
+
+#define MENELAUS_REV			0x01
+#define MENELAUS_VCORE_CTRL1		0x02
+#define MENELAUS_VCORE_CTRL2		0x03
+#define MENELAUS_VCORE_CTRL3		0x04
+#define MENELAUS_VCORE_CTRL4		0x05
+#define MENELAUS_VCORE_CTRL5		0x06
+#define MENELAUS_DCDC_CTRL1		0x07
+#define MENELAUS_DCDC_CTRL2		0x08
+#define MENELAUS_DCDC_CTRL3		0x09
+#define MENELAUS_LDO_CTRL1		0x0A
+#define MENELAUS_LDO_CTRL2		0x0B
+#define MENELAUS_LDO_CTRL3		0x0C
+#define MENELAUS_LDO_CTRL4		0x0D
+#define MENELAUS_LDO_CTRL5		0x0E
+#define MENELAUS_LDO_CTRL6		0x0F
+#define MENELAUS_LDO_CTRL7		0x10
+#define MENELAUS_LDO_CTRL8		0x11
+#define MENELAUS_SLEEP_CTRL1		0x12
+#define MENELAUS_SLEEP_CTRL2		0x13
+#define MENELAUS_DEVICE_OFF		0x14
+#define MENELAUS_OSC_CTRL		0x15
+#define MENELAUS_DETECT_CTRL		0x16
+#define MENELAUS_INT_MASK1		0x17
+#define MENELAUS_INT_MASK2		0x18
+#define MENELAUS_INT_STATUS1		0x19
+#define MENELAUS_INT_STATUS2		0x1A
+#define MENELAUS_INT_ACK1		0x1B
+#define MENELAUS_INT_ACK2		0x1C
+#define MENELAUS_GPIO_CTRL		0x1D
+#define MENELAUS_GPIO_IN		0x1E
+#define MENELAUS_GPIO_OUT		0x1F
+#define MENELAUS_BBSMS			0x20
+#define MENELAUS_RTC_CTRL		0x21
+#define MENELAUS_RTC_UPDATE		0x22
+#define MENELAUS_RTC_SEC		0x23
+#define MENELAUS_RTC_MIN		0x24
+#define MENELAUS_RTC_HR			0x25
+#define MENELAUS_RTC_DAY		0x26
+#define MENELAUS_RTC_MON		0x27
+#define MENELAUS_RTC_YR			0x28
+#define MENELAUS_RTC_WKDAY		0x29
+#define MENELAUS_RTC_AL_SEC		0x2A
+#define MENELAUS_RTC_AL_MIN		0x2B
+#define MENELAUS_RTC_AL_HR		0x2C
+#define MENELAUS_RTC_AL_DAY		0x2D
+#define MENELAUS_RTC_AL_MON		0x2E
+#define MENELAUS_RTC_AL_YR		0x2F
+#define MENELAUS_RTC_COMP_MSB		0x30
+#define MENELAUS_RTC_COMP_LSB		0x31
+#define MENELAUS_S1_PULL_EN		0x32
+#define MENELAUS_S1_PULL_DIR		0x33
+#define MENELAUS_S2_PULL_EN		0x34
+#define MENELAUS_S2_PULL_DIR		0x35
+#define MENELAUS_MCT_CTRL1		0x36
+#define MENELAUS_MCT_CTRL2		0x37
+#define MENELAUS_MCT_CTRL3		0x38
+#define MENELAUS_MCT_PIN_ST		0x39
+#define MENELAUS_DEBOUNCE1		0x3A
+
+#define IH_MENELAUS_IRQS		12
+#define MENELAUS_MMC_S1CD_IRQ		0	/* MMC slot 1 card change */
+#define MENELAUS_MMC_S2CD_IRQ		1	/* MMC slot 2 card change */
+#define MENELAUS_MMC_S1D1_IRQ		2	/* MMC DAT1 low in slot 1 */
+#define MENELAUS_MMC_S2D1_IRQ		3	/* MMC DAT1 low in slot 2 */
+#define MENELAUS_LOWBAT_IRQ		4	/* Low battery */
+#define MENELAUS_HOTDIE_IRQ		5	/* Hot die detect */
+#define MENELAUS_UVLO_IRQ		6	/* UVLO detect */
+#define MENELAUS_TSHUT_IRQ		7	/* Thermal shutdown */
+#define MENELAUS_RTCTMR_IRQ		8	/* RTC timer */
+#define MENELAUS_RTCALM_IRQ		9	/* RTC alarm */
+#define MENELAUS_RTCERR_IRQ		10	/* RTC error */
+#define MENELAUS_PSHBTN_IRQ		11	/* Push button */
+#define MENELAUS_RESERVED12_IRQ		12	/* Reserved */
+#define MENELAUS_RESERVED13_IRQ		13	/* Reserved */
+#define MENELAUS_RESERVED14_IRQ		14	/* Reserved */
+#define MENELAUS_RESERVED15_IRQ		15	/* Reserved */
+
+static void menelaus_work(struct work_struct *_menelaus);
+
+struct menelaus_chip {
+	struct mutex		lock;
+	struct i2c_client	*client;
+	struct work_struct	work;
+#ifdef CONFIG_RTC_DRV_TWL92330
+	struct rtc_device	*rtc;
+	u8			rtc_control;
+	unsigned		uie:1;
+#endif
+	unsigned		vcore_hw_mode:1;
+	u8			mask1, mask2;
+	void			(*handlers[16])(struct menelaus_chip *);
+	void			(*mmc_callback)(void *data, u8 mask);
+	void			*mmc_callback_data;
+};
+
+static struct menelaus_chip *the_menelaus;
+
+static int menelaus_write_reg(int reg, u8 value)
+{
+	int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
+
+	if (val < 0) {
+		pr_err(DRIVER_NAME ": write error");
+		return val;
+	}
+
+	return 0;
+}
+
+static int menelaus_read_reg(int reg)
+{
+	int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
+
+	if (val < 0)
+		pr_err(DRIVER_NAME ": read error");
+
+	return val;
+}
+
+static int menelaus_enable_irq(int irq)
+{
+	if (irq > 7) {
+		irq -= 8;
+		the_menelaus->mask2 &= ~(1 << irq);
+		return menelaus_write_reg(MENELAUS_INT_MASK2,
+				the_menelaus->mask2);
+	} else {
+		the_menelaus->mask1 &= ~(1 << irq);
+		return menelaus_write_reg(MENELAUS_INT_MASK1,
+				the_menelaus->mask1);
+	}
+}
+
+static int menelaus_disable_irq(int irq)
+{
+	if (irq > 7) {
+		irq -= 8;
+		the_menelaus->mask2 |= (1 << irq);
+		return menelaus_write_reg(MENELAUS_INT_MASK2,
+				the_menelaus->mask2);
+	} else {
+		the_menelaus->mask1 |= (1 << irq);
+		return menelaus_write_reg(MENELAUS_INT_MASK1,
+				the_menelaus->mask1);
+	}
+}
+
+static int menelaus_ack_irq(int irq)
+{
+	if (irq > 7)
+		return menelaus_write_reg(MENELAUS_INT_ACK2, 1 << (irq - 8));
+	else
+		return menelaus_write_reg(MENELAUS_INT_ACK1, 1 << irq);
+}
+
+/* Adds a handler for an interrupt. Does not run in interrupt context */
+static int menelaus_add_irq_work(int irq,
+		void (*handler)(struct menelaus_chip *))
+{
+	int ret = 0;
+
+	mutex_lock(&the_menelaus->lock);
+	the_menelaus->handlers[irq] = handler;
+	ret = menelaus_enable_irq(irq);
+	mutex_unlock(&the_menelaus->lock);
+
+	return ret;
+}
+
+/* Removes handler for an interrupt */
+static int menelaus_remove_irq_work(int irq)
+{
+	int ret = 0;
+
+	mutex_lock(&the_menelaus->lock);
+	ret = menelaus_disable_irq(irq);
+	the_menelaus->handlers[irq] = NULL;
+	mutex_unlock(&the_menelaus->lock);
+
+	return ret;
+}
+
+/*
+ * Gets scheduled when a card detect interrupt happens. Note that in some cases
+ * this line is wired to card cover switch rather than the card detect switch
+ * in each slot. In this case the cards are not seen by menelaus.
+ * FIXME: Add handling for D1 too
+ */
+static void menelaus_mmc_cd_work(struct menelaus_chip *menelaus_hw)
+{
+	int reg;
+	unsigned char card_mask = 0;
+
+	reg = menelaus_read_reg(MENELAUS_MCT_PIN_ST);
+	if (reg < 0)
+		return;
+
+	if (!(reg & 0x1))
+		card_mask |= (1 << 0);
+
+	if (!(reg & 0x2))
+		card_mask |= (1 << 1);
+
+	if (menelaus_hw->mmc_callback)
+		menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data,
+					  card_mask);
+}
+
+/*
+ * Toggles the MMC slots between open-drain and push-pull mode.
+ */
+int menelaus_set_mmc_opendrain(int slot, int enable)
+{
+	int ret, val;
+
+	if (slot != 1 && slot != 2)
+		return -EINVAL;
+	mutex_lock(&the_menelaus->lock);
+	ret = menelaus_read_reg(MENELAUS_MCT_CTRL1);
+	if (ret < 0) {
+		mutex_unlock(&the_menelaus->lock);
+		return ret;
+	}
+	val = ret;
+	if (slot == 1) {
+		if (enable)
+			val |= 1 << 2;
+		else
+			val &= ~(1 << 2);
+	} else {
+		if (enable)
+			val |= 1 << 3;
+		else
+			val &= ~(1 << 3);
+	}
+	ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, val);
+	mutex_unlock(&the_menelaus->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(menelaus_set_mmc_opendrain);
+
+int menelaus_set_slot_sel(int enable)
+{
+	int ret;
+
+	mutex_lock(&the_menelaus->lock);
+	ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
+	if (ret < 0)
+		goto out;
+	ret |= 0x02;
+	if (enable)
+		ret |= 1 << 5;
+	else
+		ret &= ~(1 << 5);
+	ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
+out:
+	mutex_unlock(&the_menelaus->lock);
+	return ret;
+}
+EXPORT_SYMBOL(menelaus_set_slot_sel);
+
+int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en)
+{
+	int ret, val;
+
+	if (slot != 1 && slot != 2)
+		return -EINVAL;
+	if (power >= 3)
+		return -EINVAL;
+
+	mutex_lock(&the_menelaus->lock);
+
+	ret = menelaus_read_reg(MENELAUS_MCT_CTRL2);
+	if (ret < 0)
+		goto out;
+	val = ret;
+	if (slot == 1) {
+		if (cd_en)
+			val |= (1 << 4) | (1 << 6);
+		else
+			val &= ~((1 << 4) | (1 << 6));
+	} else {
+		if (cd_en)
+			val |= (1 << 5) | (1 << 7);
+		else
+			val &= ~((1 << 5) | (1 << 7));
+	}
+	ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, val);
+	if (ret < 0)
+		goto out;
+
+	ret = menelaus_read_reg(MENELAUS_MCT_CTRL3);
+	if (ret < 0)
+		goto out;
+	val = ret;
+	if (slot == 1) {
+		if (enable)
+			val |= 1 << 0;
+		else
+			val &= ~(1 << 0);
+	} else {
+		int b;
+
+		if (enable)
+			ret |= 1 << 1;
+		else
+			ret &= ~(1 << 1);
+		b = menelaus_read_reg(MENELAUS_MCT_CTRL2);
+		b &= ~0x03;
+		b |= power;
+		ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, b);
+		if (ret < 0)
+			goto out;
+	}
+	/* Disable autonomous shutdown */
+	val &= ~(0x03 << 2);
+	ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val);
+out:
+	mutex_unlock(&the_menelaus->lock);
+	return ret;
+}
+EXPORT_SYMBOL(menelaus_set_mmc_slot);
+
+int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
+				   void *data)
+{
+	int ret = 0;
+
+	the_menelaus->mmc_callback_data = data;
+	the_menelaus->mmc_callback = callback;
+	ret = menelaus_add_irq_work(MENELAUS_MMC_S1CD_IRQ,
+				    menelaus_mmc_cd_work);
+	if (ret < 0)
+		return ret;
+	ret = menelaus_add_irq_work(MENELAUS_MMC_S2CD_IRQ,
+				    menelaus_mmc_cd_work);
+	if (ret < 0)
+		return ret;
+	ret = menelaus_add_irq_work(MENELAUS_MMC_S1D1_IRQ,
+				    menelaus_mmc_cd_work);
+	if (ret < 0)
+		return ret;
+	ret = menelaus_add_irq_work(MENELAUS_MMC_S2D1_IRQ,
+				    menelaus_mmc_cd_work);
+
+	return ret;
+}
+EXPORT_SYMBOL(menelaus_register_mmc_callback);
+
+void menelaus_unregister_mmc_callback(void)
+{
+	menelaus_remove_irq_work(MENELAUS_MMC_S1CD_IRQ);
+	menelaus_remove_irq_work(MENELAUS_MMC_S2CD_IRQ);
+	menelaus_remove_irq_work(MENELAUS_MMC_S1D1_IRQ);
+	menelaus_remove_irq_work(MENELAUS_MMC_S2D1_IRQ);
+
+	the_menelaus->mmc_callback = NULL;
+	the_menelaus->mmc_callback_data = 0;
+}
+EXPORT_SYMBOL(menelaus_unregister_mmc_callback);
+
+struct menelaus_vtg {
+	const char *name;
+	u8 vtg_reg;
+	u8 vtg_shift;
+	u8 vtg_bits;
+	u8 mode_reg;
+};
+
+struct menelaus_vtg_value {
+	u16 vtg;
+	u16 val;
+};
+
+static int menelaus_set_voltage(const struct menelaus_vtg *vtg, int mV,
+				int vtg_val, int mode)
+{
+	int val, ret;
+	struct i2c_client *c = the_menelaus->client;
+
+	mutex_lock(&the_menelaus->lock);
+	if (vtg == 0)
+		goto set_voltage;
+
+	ret = menelaus_read_reg(vtg->vtg_reg);
+	if (ret < 0)
+		goto out;
+	val = ret & ~(((1 << vtg->vtg_bits) - 1) << vtg->vtg_shift);
+	val |= vtg_val << vtg->vtg_shift;
+
+	dev_dbg(&c->dev, "Setting voltage '%s'"
+			 "to %d mV (reg 0x%02x, val 0x%02x)\n",
+			vtg->name, mV, vtg->vtg_reg, val);
+
+	ret = menelaus_write_reg(vtg->vtg_reg, val);
+	if (ret < 0)
+		goto out;
+set_voltage:
+	ret = menelaus_write_reg(vtg->mode_reg, mode);
+out:
+	mutex_unlock(&the_menelaus->lock);
+	if (ret == 0) {
+		/* Wait for voltage to stabilize */
+		msleep(1);
+	}
+	return ret;
+}
+
+static int menelaus_get_vtg_value(int vtg, const struct menelaus_vtg_value *tbl,
+				  int n)
+{
+	int i;
+
+	for (i = 0; i < n; i++, tbl++)
+		if (tbl->vtg == vtg)
+			return tbl->val;
+	return -EINVAL;
+}
+
+/*
+ * Vcore can be programmed in two ways:
+ * SW-controlled: Required voltage is programmed into VCORE_CTRL1
+ * HW-controlled: Required range (roof-floor) is programmed into VCORE_CTRL3
+ * and VCORE_CTRL4
+ *
+ * Call correct 'set' function accordingly
+ */
+
+static const struct menelaus_vtg_value vcore_values[] = {
+	{ 1000, 0 },
+	{ 1025, 1 },
+	{ 1050, 2 },
+	{ 1075, 3 },
+	{ 1100, 4 },
+	{ 1125, 5 },
+	{ 1150, 6 },
+	{ 1175, 7 },
+	{ 1200, 8 },
+	{ 1225, 9 },
+	{ 1250, 10 },
+	{ 1275, 11 },
+	{ 1300, 12 },
+	{ 1325, 13 },
+	{ 1350, 14 },
+	{ 1375, 15 },
+	{ 1400, 16 },
+	{ 1425, 17 },
+	{ 1450, 18 },
+};
+
+int menelaus_set_vcore_sw(unsigned int mV)
+{
+	int val, ret;
+	struct i2c_client *c = the_menelaus->client;
+
+	val = menelaus_get_vtg_value(mV, vcore_values,
+				     ARRAY_SIZE(vcore_values));
+	if (val < 0)
+		return -EINVAL;
+
+	dev_dbg(&c->dev, "Setting VCORE to %d mV (val 0x%02x)\n", mV, val);
+
+	/* Set SW mode and the voltage in one go. */
+	mutex_lock(&the_menelaus->lock);
+	ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
+	if (ret == 0)
+		the_menelaus->vcore_hw_mode = 0;
+	mutex_unlock(&the_menelaus->lock);
+	msleep(1);
+
+	return ret;
+}
+
+int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV)
+{
+	int fval, rval, val, ret;
+	struct i2c_client *c = the_menelaus->client;
+
+	rval = menelaus_get_vtg_value(roof_mV, vcore_values,
+				      ARRAY_SIZE(vcore_values));
+	if (rval < 0)
+		return -EINVAL;
+	fval = menelaus_get_vtg_value(floor_mV, vcore_values,
+				      ARRAY_SIZE(vcore_values));
+	if (fval < 0)
+		return -EINVAL;
+
+	dev_dbg(&c->dev, "Setting VCORE FLOOR to %d mV and ROOF to %d mV\n",
+	       floor_mV, roof_mV);
+
+	mutex_lock(&the_menelaus->lock);
+	ret = menelaus_write_reg(MENELAUS_VCORE_CTRL3, fval);
+	if (ret < 0)
+		goto out;
+	ret = menelaus_write_reg(MENELAUS_VCORE_CTRL4, rval);
+	if (ret < 0)
+		goto out;
+	if (!the_menelaus->vcore_hw_mode) {
+		val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
+		/* HW mode, turn OFF byte comparator */
+		val |= ((1 << 7) | (1 << 5));
+		ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
+		the_menelaus->vcore_hw_mode = 1;
+	}
+	msleep(1);
+out:
+	mutex_unlock(&the_menelaus->lock);
+	return ret;
+}
+
+static const struct menelaus_vtg vmem_vtg = {
+	.name = "VMEM",
+	.vtg_reg = MENELAUS_LDO_CTRL1,
+	.vtg_shift = 0,
+	.vtg_bits = 2,
+	.mode_reg = MENELAUS_LDO_CTRL3,
+};
+
+static const struct menelaus_vtg_value vmem_values[] = {
+	{ 1500, 0 },
+	{ 1800, 1 },
+	{ 1900, 2 },
+	{ 2500, 3 },
+};
+
+int menelaus_set_vmem(unsigned int mV)
+{
+	int val;
+
+	if (mV == 0)
+		return menelaus_set_voltage(&vmem_vtg, 0, 0, 0);
+
+	val = menelaus_get_vtg_value(mV, vmem_values, ARRAY_SIZE(vmem_values));
+	if (val < 0)
+		return -EINVAL;
+	return menelaus_set_voltage(&vmem_vtg, mV, val, 0x02);
+}
+EXPORT_SYMBOL(menelaus_set_vmem);
+
+static const struct menelaus_vtg vio_vtg = {
+	.name = "VIO",
+	.vtg_reg = MENELAUS_LDO_CTRL1,
+	.vtg_shift = 2,
+	.vtg_bits = 2,
+	.mode_reg = MENELAUS_LDO_CTRL4,
+};
+
+static const struct menelaus_vtg_value vio_values[] = {
+	{ 1500, 0 },
+	{ 1800, 1 },
+	{ 2500, 2 },
+	{ 2800, 3 },
+};
+
+int menelaus_set_vio(unsigned int mV)
+{
+	int val;
+
+	if (mV == 0)
+		return menelaus_set_voltage(&vio_vtg, 0, 0, 0);
+
+	val = menelaus_get_vtg_value(mV, vio_values, ARRAY_SIZE(vio_values));
+	if (val < 0)
+		return -EINVAL;
+	return menelaus_set_voltage(&vio_vtg, mV, val, 0x02);
+}
+EXPORT_SYMBOL(menelaus_set_vio);
+
+static const struct menelaus_vtg_value vdcdc_values[] = {
+	{ 1500, 0 },
+	{ 1800, 1 },
+	{ 2000, 2 },
+	{ 2200, 3 },
+	{ 2400, 4 },
+	{ 2800, 5 },
+	{ 3000, 6 },
+	{ 3300, 7 },
+};
+
+static const struct menelaus_vtg vdcdc2_vtg = {
+	.name = "VDCDC2",
+	.vtg_reg = MENELAUS_DCDC_CTRL1,
+	.vtg_shift = 0,
+	.vtg_bits = 3,
+	.mode_reg = MENELAUS_DCDC_CTRL2,
+};
+
+static const struct menelaus_vtg vdcdc3_vtg = {
+	.name = "VDCDC3",
+	.vtg_reg = MENELAUS_DCDC_CTRL1,
+	.vtg_shift = 3,
+	.vtg_bits = 3,
+	.mode_reg = MENELAUS_DCDC_CTRL3,
+};
+
+int menelaus_set_vdcdc(int dcdc, unsigned int mV)
+{
+	const struct menelaus_vtg *vtg;
+	int val;
+
+	if (dcdc != 2 && dcdc != 3)
+		return -EINVAL;
+	if (dcdc == 2)
+		vtg = &vdcdc2_vtg;
+	else
+		vtg = &vdcdc3_vtg;
+
+	if (mV == 0)
+		return menelaus_set_voltage(vtg, 0, 0, 0);
+
+	val = menelaus_get_vtg_value(mV, vdcdc_values,
+				     ARRAY_SIZE(vdcdc_values));
+	if (val < 0)
+		return -EINVAL;
+	return menelaus_set_voltage(vtg, mV, val, 0x03);
+}
+
+static const struct menelaus_vtg_value vmmc_values[] = {
+	{ 1850, 0 },
+	{ 2800, 1 },
+	{ 3000, 2 },
+	{ 3100, 3 },
+};
+
+static const struct menelaus_vtg vmmc_vtg = {
+	.name = "VMMC",
+	.vtg_reg = MENELAUS_LDO_CTRL1,
+	.vtg_shift = 6,
+	.vtg_bits = 2,
+	.mode_reg = MENELAUS_LDO_CTRL7,
+};
+
+int menelaus_set_vmmc(unsigned int mV)
+{
+	int val;
+
+	if (mV == 0)
+		return menelaus_set_voltage(&vmmc_vtg, 0, 0, 0);
+
+	val = menelaus_get_vtg_value(mV, vmmc_values, ARRAY_SIZE(vmmc_values));
+	if (val < 0)
+		return -EINVAL;
+	return menelaus_set_voltage(&vmmc_vtg, mV, val, 0x02);
+}
+EXPORT_SYMBOL(menelaus_set_vmmc);
+
+
+static const struct menelaus_vtg_value vaux_values[] = {
+	{ 1500, 0 },
+	{ 1800, 1 },
+	{ 2500, 2 },
+	{ 2800, 3 },
+};
+
+static const struct menelaus_vtg vaux_vtg = {
+	.name = "VAUX",
+	.vtg_reg = MENELAUS_LDO_CTRL1,
+	.vtg_shift = 4,
+	.vtg_bits = 2,
+	.mode_reg = MENELAUS_LDO_CTRL6,
+};
+
+int menelaus_set_vaux(unsigned int mV)
+{
+	int val;
+
+	if (mV == 0)
+		return menelaus_set_voltage(&vaux_vtg, 0, 0, 0);
+
+	val = menelaus_get_vtg_value(mV, vaux_values, ARRAY_SIZE(vaux_values));
+	if (val < 0)
+		return -EINVAL;
+	return menelaus_set_voltage(&vaux_vtg, mV, val, 0x02);
+}
+EXPORT_SYMBOL(menelaus_set_vaux);
+
+int menelaus_get_slot_pin_states(void)
+{
+	return menelaus_read_reg(MENELAUS_MCT_PIN_ST);
+}
+EXPORT_SYMBOL(menelaus_get_slot_pin_states);
+
+int menelaus_set_regulator_sleep(int enable, u32 val)
+{
+	int t, ret;
+	struct i2c_client *c = the_menelaus->client;
+
+	mutex_lock(&the_menelaus->lock);
+	ret = menelaus_write_reg(MENELAUS_SLEEP_CTRL2, val);
+	if (ret < 0)
+		goto out;
+
+	dev_dbg(&c->dev, "regulator sleep configuration: %02x\n", val);
+
+	ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
+	if (ret < 0)
+		goto out;
+	t = ((1 << 6) | 0x04);
+	if (enable)
+		ret |= t;
+	else
+		ret &= ~t;
+	ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
+out:
+	mutex_unlock(&the_menelaus->lock);
+	return ret;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/* Handles Menelaus interrupts. Does not run in interrupt context */
+static void menelaus_work(struct work_struct *_menelaus)
+{
+	struct menelaus_chip *menelaus =
+			container_of(_menelaus, struct menelaus_chip, work);
+	void (*handler)(struct menelaus_chip *menelaus);
+
+	while (1) {
+		unsigned isr;
+
+		isr = (menelaus_read_reg(MENELAUS_INT_STATUS2)
+				& ~menelaus->mask2) << 8;
+		isr |= menelaus_read_reg(MENELAUS_INT_STATUS1)
+				& ~menelaus->mask1;
+		if (!isr)
+			break;
+
+		while (isr) {
+			int irq = fls(isr) - 1;
+			isr &= ~(1 << irq);
+
+			mutex_lock(&menelaus->lock);
+			menelaus_disable_irq(irq);
+			menelaus_ack_irq(irq);
+			handler = menelaus->handlers[irq];
+			if (handler)
+				handler(menelaus);
+			menelaus_enable_irq(irq);
+			mutex_unlock(&menelaus->lock);
+		}
+	}
+	enable_irq(menelaus->client->irq);
+}
+
+/*
+ * We cannot use I2C in interrupt context, so we just schedule work.
+ */
+static irqreturn_t menelaus_irq(int irq, void *_menelaus)
+{
+	struct menelaus_chip *menelaus = _menelaus;
+
+	disable_irq_nosync(irq);
+	(void)schedule_work(&menelaus->work);
+
+	return IRQ_HANDLED;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/*
+ * The RTC needs to be set once, then it runs on backup battery power.
+ * It supports alarms, including system wake alarms (from some modes);
+ * and 1/second IRQs if requested.
+ */
+#ifdef CONFIG_RTC_DRV_TWL92330
+
+#define RTC_CTRL_RTC_EN		(1 << 0)
+#define RTC_CTRL_AL_EN		(1 << 1)
+#define RTC_CTRL_MODE12		(1 << 2)
+#define RTC_CTRL_EVERY_MASK	(3 << 3)
+#define RTC_CTRL_EVERY_SEC	(0 << 3)
+#define RTC_CTRL_EVERY_MIN	(1 << 3)
+#define RTC_CTRL_EVERY_HR	(2 << 3)
+#define RTC_CTRL_EVERY_DAY	(3 << 3)
+
+#define RTC_UPDATE_EVERY	0x08
+
+#define RTC_HR_PM		(1 << 7)
+
+static void menelaus_to_time(char *regs, struct rtc_time *t)
+{
+	t->tm_sec = bcd2bin(regs[0]);
+	t->tm_min = bcd2bin(regs[1]);
+	if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
+		t->tm_hour = bcd2bin(regs[2] & 0x1f) - 1;
+		if (regs[2] & RTC_HR_PM)
+			t->tm_hour += 12;
+	} else
+		t->tm_hour = bcd2bin(regs[2] & 0x3f);
+	t->tm_mday = bcd2bin(regs[3]);
+	t->tm_mon = bcd2bin(regs[4]) - 1;
+	t->tm_year = bcd2bin(regs[5]) + 100;
+}
+
+static int time_to_menelaus(struct rtc_time *t, int regnum)
+{
+	int	hour, status;
+
+	status = menelaus_write_reg(regnum++, bin2bcd(t->tm_sec));
+	if (status < 0)
+		goto fail;
+
+	status = menelaus_write_reg(regnum++, bin2bcd(t->tm_min));
+	if (status < 0)
+		goto fail;
+
+	if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
+		hour = t->tm_hour + 1;
+		if (hour > 12)
+			hour = RTC_HR_PM | bin2bcd(hour - 12);
+		else
+			hour = bin2bcd(hour);
+	} else
+		hour = bin2bcd(t->tm_hour);
+	status = menelaus_write_reg(regnum++, hour);
+	if (status < 0)
+		goto fail;
+
+	status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mday));
+	if (status < 0)
+		goto fail;
+
+	status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mon + 1));
+	if (status < 0)
+		goto fail;
+
+	status = menelaus_write_reg(regnum++, bin2bcd(t->tm_year - 100));
+	if (status < 0)
+		goto fail;
+
+	return 0;
+fail:
+	dev_err(&the_menelaus->client->dev, "rtc write reg %02x, err %d\n",
+			--regnum, status);
+	return status;
+}
+
+static int menelaus_read_time(struct device *dev, struct rtc_time *t)
+{
+	struct i2c_msg	msg[2];
+	char		regs[7];
+	int		status;
+
+	/* block read date and time registers */
+	regs[0] = MENELAUS_RTC_SEC;
+
+	msg[0].addr = MENELAUS_I2C_ADDRESS;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = regs;
+
+	msg[1].addr = MENELAUS_I2C_ADDRESS;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = sizeof(regs);
+	msg[1].buf = regs;
+
+	status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
+	if (status != 2) {
+		dev_err(dev, "%s error %d\n", "read", status);
+		return -EIO;
+	}
+
+	menelaus_to_time(regs, t);
+	t->tm_wday = bcd2bin(regs[6]);
+
+	return 0;
+}
+
+static int menelaus_set_time(struct device *dev, struct rtc_time *t)
+{
+	int		status;
+
+	/* write date and time registers */
+	status = time_to_menelaus(t, MENELAUS_RTC_SEC);
+	if (status < 0)
+		return status;
+	status = menelaus_write_reg(MENELAUS_RTC_WKDAY, bin2bcd(t->tm_wday));
+	if (status < 0) {
+		dev_err(&the_menelaus->client->dev, "rtc write reg %02x "
+				"err %d\n", MENELAUS_RTC_WKDAY, status);
+		return status;
+	}
+
+	/* now commit the write */
+	status = menelaus_write_reg(MENELAUS_RTC_UPDATE, RTC_UPDATE_EVERY);
+	if (status < 0)
+		dev_err(&the_menelaus->client->dev, "rtc commit time, err %d\n",
+				status);
+
+	return 0;
+}
+
+static int menelaus_read_alarm(struct device *dev, struct rtc_wkalrm *w)
+{
+	struct i2c_msg	msg[2];
+	char		regs[6];
+	int		status;
+
+	/* block read alarm registers */
+	regs[0] = MENELAUS_RTC_AL_SEC;
+
+	msg[0].addr = MENELAUS_I2C_ADDRESS;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = regs;
+
+	msg[1].addr = MENELAUS_I2C_ADDRESS;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = sizeof(regs);
+	msg[1].buf = regs;
+
+	status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
+	if (status != 2) {
+		dev_err(dev, "%s error %d\n", "alarm read", status);
+		return -EIO;
+	}
+
+	menelaus_to_time(regs, &w->time);
+
+	w->enabled = !!(the_menelaus->rtc_control & RTC_CTRL_AL_EN);
+
+	/* NOTE we *could* check if actually pending... */
+	w->pending = 0;
+
+	return 0;
+}
+
+static int menelaus_set_alarm(struct device *dev, struct rtc_wkalrm *w)
+{
+	int		status;
+
+	if (the_menelaus->client->irq <= 0 && w->enabled)
+		return -ENODEV;
+
+	/* clear previous alarm enable */
+	if (the_menelaus->rtc_control & RTC_CTRL_AL_EN) {
+		the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
+		status = menelaus_write_reg(MENELAUS_RTC_CTRL,
+				the_menelaus->rtc_control);
+		if (status < 0)
+			return status;
+	}
+
+	/* write alarm registers */
+	status = time_to_menelaus(&w->time, MENELAUS_RTC_AL_SEC);
+	if (status < 0)
+		return status;
+
+	/* enable alarm if requested */
+	if (w->enabled) {
+		the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
+		status = menelaus_write_reg(MENELAUS_RTC_CTRL,
+				the_menelaus->rtc_control);
+	}
+
+	return status;
+}
+
+#ifdef CONFIG_RTC_INTF_DEV
+
+static void menelaus_rtc_update_work(struct menelaus_chip *m)
+{
+	/* report 1/sec update */
+	local_irq_disable();
+	rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_UF);
+	local_irq_enable();
+}
+
+static int menelaus_ioctl(struct device *dev, unsigned cmd, unsigned long arg)
+{
+	int	status;
+
+	if (the_menelaus->client->irq <= 0)
+		return -ENOIOCTLCMD;
+
+	switch (cmd) {
+	/* alarm IRQ */
+	case RTC_AIE_ON:
+		if (the_menelaus->rtc_control & RTC_CTRL_AL_EN)
+			return 0;
+		the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
+		break;
+	case RTC_AIE_OFF:
+		if (!(the_menelaus->rtc_control & RTC_CTRL_AL_EN))
+			return 0;
+		the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
+		break;
+	/* 1/second "update" IRQ */
+	case RTC_UIE_ON:
+		if (the_menelaus->uie)
+			return 0;
+		status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
+		status = menelaus_add_irq_work(MENELAUS_RTCTMR_IRQ,
+				menelaus_rtc_update_work);
+		if (status == 0)
+			the_menelaus->uie = 1;
+		return status;
+	case RTC_UIE_OFF:
+		if (!the_menelaus->uie)
+			return 0;
+		status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
+		if (status == 0)
+			the_menelaus->uie = 0;
+		return status;
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
+}
+
+#else
+#define menelaus_ioctl	NULL
+#endif
+
+/* REVISIT no compensation register support ... */
+
+static const struct rtc_class_ops menelaus_rtc_ops = {
+	.ioctl			= menelaus_ioctl,
+	.read_time		= menelaus_read_time,
+	.set_time		= menelaus_set_time,
+	.read_alarm		= menelaus_read_alarm,
+	.set_alarm		= menelaus_set_alarm,
+};
+
+static void menelaus_rtc_alarm_work(struct menelaus_chip *m)
+{
+	/* report alarm */
+	local_irq_disable();
+	rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_AF);
+	local_irq_enable();
+
+	/* then disable it; alarms are oneshot */
+	the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
+	menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
+}
+
+static inline void menelaus_rtc_init(struct menelaus_chip *m)
+{
+	int	alarm = (m->client->irq > 0);
+
+	/* assume 32KDETEN pin is pulled high */
+	if (!(menelaus_read_reg(MENELAUS_OSC_CTRL) & 0x80)) {
+		dev_dbg(&m->client->dev, "no 32k oscillator\n");
+		return;
+	}
+
+	/* support RTC alarm; it can issue wakeups */
+	if (alarm) {
+		if (menelaus_add_irq_work(MENELAUS_RTCALM_IRQ,
+				menelaus_rtc_alarm_work) < 0) {
+			dev_err(&m->client->dev, "can't handle RTC alarm\n");
+			return;
+		}
+		device_init_wakeup(&m->client->dev, 1);
+	}
+
+	/* be sure RTC is enabled; allow 1/sec irqs; leave 12hr mode alone */
+	m->rtc_control = menelaus_read_reg(MENELAUS_RTC_CTRL);
+	if (!(m->rtc_control & RTC_CTRL_RTC_EN)
+			|| (m->rtc_control & RTC_CTRL_AL_EN)
+			|| (m->rtc_control & RTC_CTRL_EVERY_MASK)) {
+		if (!(m->rtc_control & RTC_CTRL_RTC_EN)) {
+			dev_warn(&m->client->dev, "rtc clock needs setting\n");
+			m->rtc_control |= RTC_CTRL_RTC_EN;
+		}
+		m->rtc_control &= ~RTC_CTRL_EVERY_MASK;
+		m->rtc_control &= ~RTC_CTRL_AL_EN;
+		menelaus_write_reg(MENELAUS_RTC_CTRL, m->rtc_control);
+	}
+
+	m->rtc = rtc_device_register(DRIVER_NAME,
+			&m->client->dev,
+			&menelaus_rtc_ops, THIS_MODULE);
+	if (IS_ERR(m->rtc)) {
+		if (alarm) {
+			menelaus_remove_irq_work(MENELAUS_RTCALM_IRQ);
+			device_init_wakeup(&m->client->dev, 0);
+		}
+		dev_err(&m->client->dev, "can't register RTC: %d\n",
+				(int) PTR_ERR(m->rtc));
+		the_menelaus->rtc = NULL;
+	}
+}
+
+#else
+
+static inline void menelaus_rtc_init(struct menelaus_chip *m)
+{
+	/* nothing */
+}
+
+#endif
+
+/*-----------------------------------------------------------------------*/
+
+static struct i2c_driver menelaus_i2c_driver;
+
+static int menelaus_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct menelaus_chip	*menelaus;
+	int			rev = 0, val;
+	int			err = 0;
+	struct menelaus_platform_data *menelaus_pdata =
+					client->dev.platform_data;
+
+	if (the_menelaus) {
+		dev_dbg(&client->dev, "only one %s for now\n",
+				DRIVER_NAME);
+		return -ENODEV;
+	}
+
+	menelaus = kzalloc(sizeof *menelaus, GFP_KERNEL);
+	if (!menelaus)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, menelaus);
+
+	the_menelaus = menelaus;
+	menelaus->client = client;
+
+	/* If a true probe check the device */
+	rev = menelaus_read_reg(MENELAUS_REV);
+	if (rev < 0) {
+		pr_err(DRIVER_NAME ": device not found");
+		err = -ENODEV;
+		goto fail1;
+	}
+
+	/* Ack and disable all Menelaus interrupts */
+	menelaus_write_reg(MENELAUS_INT_ACK1, 0xff);
+	menelaus_write_reg(MENELAUS_INT_ACK2, 0xff);
+	menelaus_write_reg(MENELAUS_INT_MASK1, 0xff);
+	menelaus_write_reg(MENELAUS_INT_MASK2, 0xff);
+	menelaus->mask1 = 0xff;
+	menelaus->mask2 = 0xff;
+
+	/* Set output buffer strengths */
+	menelaus_write_reg(MENELAUS_MCT_CTRL1, 0x73);
+
+	if (client->irq > 0) {
+		err = request_irq(client->irq, menelaus_irq, IRQF_DISABLED,
+				  DRIVER_NAME, menelaus);
+		if (err) {
+			dev_dbg(&client->dev,  "can't get IRQ %d, err %d\n",
+					client->irq, err);
+			goto fail1;
+		}
+	}
+
+	mutex_init(&menelaus->lock);
+	INIT_WORK(&menelaus->work, menelaus_work);
+
+	pr_info("Menelaus rev %d.%d\n", rev >> 4, rev & 0x0f);
+
+	val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
+	if (val < 0)
+		goto fail2;
+	if (val & (1 << 7))
+		menelaus->vcore_hw_mode = 1;
+	else
+		menelaus->vcore_hw_mode = 0;
+
+	if (menelaus_pdata != NULL && menelaus_pdata->late_init != NULL) {
+		err = menelaus_pdata->late_init(&client->dev);
+		if (err < 0)
+			goto fail2;
+	}
+
+	menelaus_rtc_init(menelaus);
+
+	return 0;
+fail2:
+	free_irq(client->irq, menelaus);
+	flush_scheduled_work();
+fail1:
+	kfree(menelaus);
+	return err;
+}
+
+static int __exit menelaus_remove(struct i2c_client *client)
+{
+	struct menelaus_chip	*menelaus = i2c_get_clientdata(client);
+
+	free_irq(client->irq, menelaus);
+	kfree(menelaus);
+	i2c_set_clientdata(client, NULL);
+	the_menelaus = NULL;
+	return 0;
+}
+
+static const struct i2c_device_id menelaus_id[] = {
+	{ "menelaus", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, menelaus_id);
+
+static struct i2c_driver menelaus_i2c_driver = {
+	.driver = {
+		.name		= DRIVER_NAME,
+	},
+	.probe		= menelaus_probe,
+	.remove		= __exit_p(menelaus_remove),
+	.id_table	= menelaus_id,
+};
+
+static int __init menelaus_init(void)
+{
+	int res;
+
+	res = i2c_add_driver(&menelaus_i2c_driver);
+	if (res < 0) {
+		pr_err(DRIVER_NAME ": driver registration failed\n");
+		return res;
+	}
+
+	return 0;
+}
+
+static void __exit menelaus_exit(void)
+{
+	i2c_del_driver(&menelaus_i2c_driver);
+
+	/* FIXME: Shutdown menelaus parts that can be shut down */
+}
+
+MODULE_AUTHOR("Texas Instruments, Inc. (and others)");
+MODULE_DESCRIPTION("I2C interface for Menelaus.");
+MODULE_LICENSE("GPL");
+
+module_init(menelaus_init);
+module_exit(menelaus_exit);
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 6c0d1bec4b7..54ddf3772e0 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -34,6 +34,7 @@ static int mfd_add_device(struct device *parent, int id,
 		goto fail_device;
 
 	pdev->dev.parent = parent;
+	platform_set_drvdata(pdev, cell->driver_data);
 
 	ret = platform_device_add_data(pdev,
 			cell->platform_data, cell->data_size);
diff --git a/drivers/mfd/pcf50606-adc.c b/drivers/mfd/pcf50606-adc.c
deleted file mode 100644
index 68e099ad61c..00000000000
--- a/drivers/mfd/pcf50606-adc.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/* Philips PCF50606 ADC Driver
- *
- * (C) 2006-2008 by Openmoko, Inc.
- * Author: Balaji Rao <balajirrao@openmoko.org>
- * All rights reserved.
- *
- * Broken down from monstrous PCF50606 driver mainly by
- * Harald Welte, Andy Green and Werner Almesberger
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/mfd/pcf50606/core.h>
-#include <linux/mfd/pcf50606/adc.h>
-
-struct pcf50606_adc_request {
-	int mux;
-	int avg;
-	int result;
-	void (*callback)(struct pcf50606 *, void *, int);
-	void *callback_param;
-
-	/* Used in case of sync requests */
-	struct completion completion;
-
-};
-
-static void adc_read_setup(struct pcf50606 *pcf,
-				 int channel, int avg)
-{
-	channel &= PCF50606_ADCC2_ADCMUX_MASK;
-
-	/* start ADC conversion of selected channel */
-	pcf50606_reg_write(pcf, PCF50606_REG_ADCC2, channel |
-		    PCF50606_ADCC2_ADCSTART | PCF50606_ADCC2_RES_10BIT);
-
-}
-
-static void trigger_next_adc_job_if_any(struct pcf50606 *pcf)
-{
-	int head, tail;
-
-	mutex_lock(&pcf->adc.queue_mutex);
-
-	head = pcf->adc.queue_head;
-	tail = pcf->adc.queue_tail;
-
-	if (!pcf->adc.queue[head])
-		goto out;
-
-	adc_read_setup(pcf, pcf->adc.queue[head]->mux,
-				pcf->adc.queue[head]->avg);
-out:
-	mutex_unlock(&pcf->adc.queue_mutex);
-}
-
-static int
-adc_enqueue_request(struct pcf50606 *pcf, struct pcf50606_adc_request *req)
-{
-	int head, tail;
-
-	mutex_lock(&pcf->adc.queue_mutex);
-	head = pcf->adc.queue_head;
-	tail = pcf->adc.queue_tail;
-
-	if (pcf->adc.queue[tail]) {
-		mutex_unlock(&pcf->adc.queue_mutex);
-		return -EBUSY;
-	}
-
-	pcf->adc.queue[tail] = req;
-
-	pcf->adc.queue_tail =
-		(tail + 1) & (PCF50606_MAX_ADC_FIFO_DEPTH - 1);
-
-	mutex_unlock(&pcf->adc.queue_mutex);
-
-	trigger_next_adc_job_if_any(pcf);
-
-	return 0;
-}
-
-static void
-pcf50606_adc_sync_read_callback(struct pcf50606 *pcf, void *param, int result)
-{
-	struct pcf50606_adc_request *req;
-
-	/*We know here that the passed param is an adc_request object */
-	req = (struct pcf50606_adc_request *)param;
-
-	req->result = result;
-	complete(&req->completion);
-}
-
-int pcf50606_adc_sync_read(struct pcf50606 *pcf, int mux, int avg)
-{
-
-	struct pcf50606_adc_request *req;
-	int result;
-
-	/* req is freed when the result is ready, in pcf50606_work*/
-	req = kzalloc(sizeof(*req), GFP_KERNEL);
-	if (!req)
-		return -ENOMEM;
-
-	req->mux = mux;
-	req->avg = avg;
-	req->callback =  pcf50606_adc_sync_read_callback;
-	req->callback_param = req;
-	init_completion(&req->completion);
-
-	adc_enqueue_request(pcf, req);
-
-	wait_for_completion(&req->completion);
-	result = req->result;
-
-	return result;
-}
-EXPORT_SYMBOL_GPL(pcf50606_adc_sync_read);
-
-int pcf50606_adc_async_read(struct pcf50606 *pcf, int mux, int avg,
-			     void (*callback)(struct pcf50606 *, void *, int),
-			     void *callback_param)
-{
-	struct pcf50606_adc_request *req;
-
-	/* req is freed when the result is ready, in pcf50606_work*/
-	req = kmalloc(sizeof(*req), GFP_KERNEL);
-	if (!req)
-		return -ENOMEM;
-
-	req->mux = mux;
-	req->avg = avg;
-	req->callback = callback;
-	req->callback_param = callback_param;
-
-	adc_enqueue_request(pcf, req);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(pcf50606_adc_async_read);
-
-static int adc_result(struct pcf50606 *pcf)
-{
-	u16 ret = (pcf50606_reg_read(pcf, PCF50606_REG_ADCS1) << 2) |
-			(pcf50606_reg_read(pcf, PCF50606_REG_ADCS2) & 0x03);
-
-	dev_info(pcf->dev, "adc result = %d\n", ret);
-
-	return ret;
-}
-
-static void pcf50606_adc_irq(struct pcf50606 *pcf, int irq, void *unused)
-{
-	struct pcf50606_adc_request *req;
-	int head;
-
-	mutex_lock(&pcf->adc.queue_mutex);
-	head = pcf->adc.queue_head;
-
-	req = pcf->adc.queue[head];
-	if (!req) {
-		dev_err(pcf->dev, "ADC queue empty\n");
-		mutex_unlock(&pcf->adc.queue_mutex);
-		return;
-	}
-	pcf->adc.queue[head] = NULL;
-	pcf->adc.queue_head = (head + 1) &
-				      (PCF50606_MAX_ADC_FIFO_DEPTH - 1);
-
-	mutex_unlock(&pcf->adc.queue_mutex);
-	req->callback(pcf, req->callback_param, adc_result(pcf));
-
-	kfree(req);
-
-	trigger_next_adc_job_if_any(pcf);
-}
-
-int __init pcf50606_adc_probe(struct platform_device *pdev)
-{
-	struct pcf50606 *pcf;
-
-	pcf = platform_get_drvdata(pdev);
-
-	/* Set up IRQ handlers */
-	pcf->irq_handler[PCF50606_IRQ_ADCRDY].handler = pcf50606_adc_irq;
-
-	mutex_init(&pcf->adc.queue_mutex);
-	return 0;
-}
-
-static int __devexit pcf50606_adc_remove(struct platform_device *pdev)
-{
-	struct pcf50606 *pcf;
-
-	pcf = platform_get_drvdata(pdev);
-	pcf->irq_handler[PCF50606_IRQ_ADCRDY].handler = NULL;
-
-	return 0;
-}
-
-struct platform_driver pcf50606_adc_driver = {
-	.driver = {
-		.name = "pcf50606-adc",
-	},
-	.probe = pcf50606_adc_probe,
-	.remove = __devexit_p(pcf50606_adc_remove),
-};
-
-static int __init pcf50606_adc_init(void)
-{
-		return platform_driver_register(&pcf50606_adc_driver);
-}
-module_init(pcf50606_adc_init);
-
-static void __exit pcf50606_adc_exit(void)
-{
-		platform_driver_unregister(&pcf50606_adc_driver);
-}
-module_exit(pcf50606_adc_exit);
-
-MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
-MODULE_DESCRIPTION("PCF50606 adc driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:pcf50606-adc");
-
diff --git a/drivers/mfd/pcf50606-core.c b/drivers/mfd/pcf50606-core.c
deleted file mode 100644
index 47a8aa11954..00000000000
--- a/drivers/mfd/pcf50606-core.c
+++ /dev/null
@@ -1,580 +0,0 @@
-/* Philips PCF50606 Power Management Unit (PMU) driver
- *
- * (C) 2006-2008 by Openmoko, Inc.
- * Author: Harald Welte <laforge@openmoko.org>
- *	    Matt Hsu <matt@openmoko.org>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/reboot.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-
-#include <linux/mfd/pcf50606/core.h>
-
-/* Read a block of upto 32 regs  */
-int pcf50606_read_block(struct pcf50606 *pcf , u8 reg,
-					int nr_regs, u8 *data)
-{
-	int ret;
-
-	mutex_lock(&pcf->lock);
-	ret = i2c_smbus_read_i2c_block_data(pcf->i2c_client, reg,
-							nr_regs, data);
-	mutex_unlock(&pcf->lock);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(pcf50606_read_block);
-
-/* Write a block of upto 32 regs  */
-int pcf50606_write_block(struct pcf50606 *pcf , u8 reg,
-					int nr_regs, u8 *data)
-{
-	int ret;
-
-	mutex_lock(&pcf->lock);
-	ret = i2c_smbus_write_i2c_block_data(pcf->i2c_client, reg,
-							nr_regs, data);
-	mutex_unlock(&pcf->lock);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(pcf50606_write_block);
-
-u8 pcf50606_reg_read(struct pcf50606 *pcf, u8 reg)
-{
-	int ret;
-
-	mutex_lock(&pcf->lock);
-	ret = i2c_smbus_read_byte_data(pcf->i2c_client, reg);
-	mutex_unlock(&pcf->lock);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(pcf50606_reg_read);
-
-int pcf50606_reg_write(struct pcf50606 *pcf, u8 reg, u8 val)
-{
-	int ret;
-	mutex_lock(&pcf->lock);
-	ret = i2c_smbus_write_byte_data(pcf->i2c_client, reg, val);
-	mutex_unlock(&pcf->lock);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(pcf50606_reg_write);
-
-int pcf50606_reg_set_bit_mask(struct pcf50606 *pcf, u8 reg, u8 mask, u8 val)
-{
-	int ret;
-	u8 tmp;
-
-	val &= mask;
-
-	mutex_lock(&pcf->lock);
-
-	tmp = i2c_smbus_read_byte_data(pcf->i2c_client, reg);
-	tmp &= ~mask;
-	tmp |= val;
-	ret = i2c_smbus_write_byte_data(pcf->i2c_client, reg, tmp);
-
-	mutex_unlock(&pcf->lock);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(pcf50606_reg_set_bit_mask);
-
-int pcf50606_reg_clear_bits(struct pcf50606 *pcf, u8 reg, u8 val)
-{
-	int ret;
-	u8 tmp;
-
-	mutex_lock(&pcf->lock);
-
-	tmp = i2c_smbus_read_byte_data(pcf->i2c_client, reg);
-	tmp &= ~val;
-	ret = i2c_smbus_write_byte_data(pcf->i2c_client, reg, tmp);
-
-	mutex_unlock(&pcf->lock);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(pcf50606_reg_clear_bits);
-
-static ssize_t show_resume_reason(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct pcf50606 *pcf = dev_get_drvdata(dev);
-	int n;
-
-	n = sprintf(buf, "%02x%02x%02x%02x%02x\n",
-				pcf->resume_reason[0],
-				pcf->resume_reason[1],
-				pcf->resume_reason[2],
-				pcf->resume_reason[3],
-				pcf->resume_reason[4]);
-
-	return n;
-}
-static DEVICE_ATTR(resume_reason, 0400, show_resume_reason, NULL);
-
-static struct attribute *pcf_sysfs_entries[] = {
-	&dev_attr_resume_reason.attr,
-	NULL,
-};
-
-static struct attribute_group pcf_attr_group = {
-	.name	= NULL,			/* put in device directory */
-	.attrs	= pcf_sysfs_entries,
-};
-
-
-static int pcf50606_irq_mask_set(struct pcf50606 *pcf, int irq, int mask)
-{
-	u8 reg, bits, tmp;
-	int ret = 0, idx;
-
-	idx = irq / 8;
-	reg =  PCF50606_REG_INT1M + idx;
-	bits = 1 << (irq % 8);
-
-	mutex_lock(&pcf->lock);
-
-	if (mask) {
-		tmp = i2c_smbus_read_byte_data(pcf->i2c_client, reg);
-		tmp |= bits;
-		ret = i2c_smbus_write_byte_data(pcf->i2c_client, reg, tmp);
-
-		pcf->mask_regs[idx] &= ~bits;
-		pcf->mask_regs[idx] |= bits;
-	} else {
-		tmp = i2c_smbus_read_byte_data(pcf->i2c_client, reg);
-		tmp &= ~bits;
-		ret = i2c_smbus_write_byte_data(pcf->i2c_client, reg, tmp);
-
-		pcf->mask_regs[idx] &= ~bits;
-	}
-
-	mutex_unlock(&pcf->lock);
-
-	return 0;
-}
-
-int pcf50606_irq_mask(struct pcf50606 *pcf, int irq)
-{
-	dev_info(pcf->dev, "Masking IRQ %d\n", irq);
-
-	return pcf50606_irq_mask_set(pcf, irq, 1);
-}
-EXPORT_SYMBOL_GPL(pcf50606_irq_mask);
-
-int pcf50606_irq_unmask(struct pcf50606 *pcf, int irq)
-{
-	dev_info(pcf->dev, "Unmasking IRQ %d\n", irq);
-
-	return pcf50606_irq_mask_set(pcf, irq, 0);
-}
-EXPORT_SYMBOL_GPL(pcf50606_irq_unmask);
-
-int pcf50606_irq_mask_get(struct pcf50606 *pcf, int irq)
-{
-	u8 reg, bits;
-
-	reg =  (irq / 8);
-	bits = (1 << (irq % 8));
-
-	return pcf->mask_regs[reg] & bits;
-}
-EXPORT_SYMBOL_GPL(pcf50606_irq_mask_get);
-
-static void pcf50606_irq_call_handler(struct pcf50606 *pcf,
-					int irq)
-{
-	if (pcf->irq_handler[irq].handler)
-		pcf->irq_handler[irq].handler(pcf, irq,
-					pcf->irq_handler[irq].data);
-}
-
-#define PCF50606_ONKEY1S_TIMEOUT 8
-
-static void pcf50606_irq_worker(struct work_struct *work)
-{
-	struct pcf50606 *pcf;
-	int ret, i, j;
-	u8 pcf_int[3], chgstat;
-
-	pcf = container_of(work, struct pcf50606, irq_work);
-
-	/* Read the 3 INT regs in one transaction */
-	ret = pcf50606_read_block(pcf, PCF50606_REG_INT1,
-						sizeof(pcf_int), pcf_int);
-	if (ret != sizeof(pcf_int)) {
-		dev_info(pcf->dev, "Error reading INT registers\n");
-
-		/* We don't have an option but to retry. Because if
-		 * we don't, there won't be another interrupt edge.
-		 */
-		goto reschedule;
-	}
-
-	/* We immediately read the usb and adapter status. We thus make sure
-	 * only of CHGINS/CHGRM handlers are called */
-	if (pcf_int[1] & (PCF50606_INT2_CHGINS | PCF50606_INT2_CHGRM)) {
-		chgstat = pcf50606_reg_read(pcf, PCF50606_REG_MBCS1);
-		if (chgstat & (0x1 << 4))
-			pcf_int[1] &= ~(1 << PCF50606_INT2_CHGRM);
-		else
-			pcf_int[1] &= ~(1 << PCF50606_INT2_CHGINS);
-	}
-	
-	dev_info(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x",
-				pcf_int[0], pcf_int[1], pcf_int[2]);
-
-	/* Some revisions of the chip don't have a 8s standby mode on
-	 * ONKEY1S press. We try to manually do it in such cases. */
-
-	if (pcf_int[0] & PCF50606_INT1_SECOND && pcf->onkey1s_held) {
-		dev_info(pcf->dev, "ONKEY1S held for %d secs\n",
-							pcf->onkey1s_held);
-		if (pcf->onkey1s_held++ == PCF50606_ONKEY1S_TIMEOUT)
-			if (pcf->pdata->force_shutdown)
-				pcf->pdata->force_shutdown(pcf);
-	}
-
-	if (pcf_int[0] & PCF50606_INT1_ONKEY1S) {
-		dev_info(pcf->dev, "ONKEY1S held\n");
-		pcf->onkey1s_held = 1 ;
-
-		/* Unmask IRQ_SECOND */
-		pcf50606_reg_clear_bits(pcf, PCF50606_REG_INT1M,
-						PCF50606_INT1_SECOND);
-
-		/* Unmask IRQ_ONKEYF */
-		pcf50606_reg_clear_bits(pcf, PCF50606_REG_INT1M,
-						PCF50606_INT1_ONKEYF);
-	}
-
-	if ((pcf_int[0] & PCF50606_INT1_ONKEYR) && pcf->onkey1s_held) {
-		pcf->onkey1s_held = 0;
-
-		/* Mask SECOND and ONKEYF interrupts */
-		if (pcf->mask_regs[0] & PCF50606_INT1_SECOND)
-			pcf50606_reg_set_bit_mask(pcf,
-					PCF50606_REG_INT1M,
-					PCF50606_INT1_SECOND,
-					PCF50606_INT1_SECOND);
-
-		if (pcf->mask_regs[0] & PCF50606_INT1_ONKEYF)
-			pcf50606_reg_set_bit_mask(pcf,
-					PCF50606_REG_INT1M,
-					PCF50606_INT1_ONKEYF,
-					PCF50606_INT1_ONKEYF);
-	}
-
-	/* Have we just resumed ? */
-	if (pcf->is_suspended) {
-
-		pcf->is_suspended = 0;
-
-		/* Set the resume reason filtering out non resumers */
-		for (i = 0; i < ARRAY_SIZE(pcf_int); i++)
-			pcf->resume_reason[i] = pcf_int[i] &
-						pcf->pdata->resumers[i];
-
-		/* Make sure we don't pass on any input events to
-		 * userspace now */
-		pcf_int[0] &= ~(PCF50606_INT1_SECOND | PCF50606_INT1_ALARM);
-	}
-
-	/* Unset masked interrupts */
-	for (i = 0; i < ARRAY_SIZE(pcf_int); i++)
-		pcf_int[i] &= ~pcf->mask_regs[i];
-
-	for (i = 0; i < ARRAY_SIZE(pcf_int); i++)
-		for (j = 0; j < 8 ; j++)
-			if (pcf_int[i] & (1 << j))
-				pcf50606_irq_call_handler(pcf, (i * 8) + j);
-
-	put_device(pcf->dev);
-
-	return;
-reschedule:
-	schedule_work(&pcf->irq_work);
-
-	/* Don't put_device here. Will be used when we are rescheduled */
-
-	return;
-}
-
-static irqreturn_t pcf50606_irq(int irq, void *data)
-{
-	struct pcf50606 *pcf = data;
-
-	get_device(pcf->dev);
-	schedule_work(&pcf->irq_work);
-
-	return IRQ_HANDLED;
-}
-
-static void
-pcf50606_client_dev_register(struct pcf50606 *pcf, const char *name,
-						struct platform_device **pdev)
-{
-	int ret;
-
-	*pdev = platform_device_alloc(name, -1);
-
-	if (!pdev) {
-		dev_err(pcf->dev, "Falied to allocate %s\n", name);
-		return;
-	}
-
-	(*pdev)->dev.parent = pcf->dev;
-	platform_set_drvdata(*pdev, pcf);
-
-	ret = platform_device_add(*pdev);
-	if (ret != 0) {
-		dev_err(pcf->dev, "Failed to register %s: %d\n", name, ret);
-		platform_device_put(*pdev);
-		*pdev = NULL;
-	}
-}
-
-#ifdef CONFIG_PM
-static int pcf50606_suspend(struct device *dev, pm_message_t state)
-{
-	struct pcf50606 *pcf;
-	int ret, i;
-	u8 res[3];
-
-	pcf = dev_get_drvdata(dev);
-
-	/* Make sure our interrupt handlers are not called
-	 * henceforth */
-	disable_irq(pcf->irq);
-
-	/* Make sure that an IRQ worker has quit */
-	cancel_work_sync(&pcf->irq_work);
-
-	/* Save the masks */
-	ret = pcf50606_read_block(pcf, PCF50606_REG_INT1M,
-				ARRAY_SIZE(pcf->suspend_irq_masks),
-						pcf->suspend_irq_masks);
-	if (ret < 0)
-		dev_err(pcf->dev, "error saving irq masks\n");
-
-	/* Set interrupt masks. So that only those sources we want to wake
-	 * us up can
-	 */
-	for (i = 0; i < ARRAY_SIZE(res); i++)
-		res[i] = ~pcf->pdata->resumers[i];
-
-	pcf50606_write_block(pcf, PCF50606_REG_INT1M,
-					ARRAY_SIZE(res), &res[0]);
-
-	pcf->is_suspended = 1;
-
-	return 0;
-}
-
-static int pcf50606_resume(struct device *dev)
-{
-	struct pcf50606 *pcf;
-
-	pcf = dev_get_drvdata(dev);
-
-	/* Write the saved mask registers */
-	pcf50606_write_block(pcf, PCF50606_REG_INT1M,
-			ARRAY_SIZE(pcf->suspend_irq_masks),
-					pcf->suspend_irq_masks);
-
-	/* Clear any pending interrupts and set resume reason if any */
-	pcf50606_irq_worker(&pcf->irq_work);
-
-	enable_irq(pcf->irq);
-
-	return 0;
-}
-#else
-#define pcf50606_suspend NULL
-#define pcf50606_resume NULL
-#endif
-
-static int pcf50606_probe(struct i2c_client *client,
-				const struct i2c_device_id *ids)
-{
-	struct pcf50606 *pcf;
-	struct pcf50606_platform_data *pdata;
-	int i, ret = 0;
-	int version, variant;
-	u8 mbcs1;
-
-	pdata = client->dev.platform_data;
-
-	pcf = kzalloc(sizeof(*pcf), GFP_KERNEL);
-	if (!pcf)
-		return -ENOMEM;
-
-	pcf->pdata = pdata;
-	pdata->pcf = pcf;
-
-	mutex_init(&pcf->lock);
-
-	i2c_set_clientdata(client, pcf);
-	pcf->dev = &client->dev;
-	pcf->i2c_client = client;
-
-	INIT_WORK(&pcf->irq_work, pcf50606_irq_worker);
-
-	version = pcf50606_reg_read(pcf, 0);
-	if (version < 0) {
-		dev_err(pcf->dev, "Unable to probe pcf50606\n");
-		kfree(pcf);
-		return -ENODEV;
-	}
-
-	variant = pcf50606_reg_read(pcf, 1);
-	if (version < 0) {
-		dev_err(pcf->dev, "Unable to probe pcf50606\n");
-		kfree(pcf);
-		return -ENODEV;
-	}
-
-	dev_info(pcf->dev, "Probed device version %d variant %d\n",
-							version, variant);
-
-	/* Enable all inteerupts except RTC SECOND */
-	pcf->mask_regs[0] = 0x80;
-	pcf50606_reg_write(pcf, PCF50606_REG_INT1M, 0x80);
-
-	pcf50606_reg_write(pcf, PCF50606_REG_INT2M, 0x00);
-	pcf50606_reg_write(pcf, PCF50606_REG_INT3M, 0x00);
-
-	pcf50606_client_dev_register(pcf, "pcf50606-input",
-						&pcf->input.pdev);
-	pcf50606_client_dev_register(pcf, "pcf50606-rtc",
-						&pcf->rtc.pdev);
-	pcf50606_client_dev_register(pcf, "pcf50606-mbc",
-						&pcf->mbc.pdev);
-	pcf50606_client_dev_register(pcf, "pcf50606-adc",
-						&pcf->adc.pdev);
-	pcf50606_client_dev_register(pcf, "pcf50606-wdt",
-						&pcf->wdt.pdev);
-	for (i = 0; i < PCF50606_NUM_REGULATORS; i++) {
-		struct platform_device *pdev;
-
-		pdev = platform_device_alloc("pcf50606-regltr", i);
-		if (!pdev) {
-			dev_err(pcf->dev, "Cannot create regulator\n");
-			continue;
-		}
-
-		pdev->dev.parent = pcf->dev;
-		pdev->dev.platform_data = &pdata->reg_init_data[i];
-		pdev->dev.driver_data = pcf;
-		pcf->pmic.pdev[i] = pdev;
-
-		platform_device_add(pdev);
-	}
-
-	pcf->irq = client->irq;
-
-	if (client->irq) {
-		ret = request_irq(client->irq, pcf50606_irq,
-				IRQF_TRIGGER_FALLING, "pcf50606", pcf);
-
-		if (ret) {
-			dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
-			goto err;
-		}
-	} else {
-		dev_err(pcf->dev, "No IRQ configured\n");
-		goto err;
-	}
-
-	if (enable_irq_wake(client->irq) < 0)
-		dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
-			"in this hardware revision", client->irq);
-
-	/* Cold Intialization */
-	mbcs1 = pcf50606_reg_read(pcf, PCF50606_REG_MBCS1);
-
-	if (mbcs1 & (0x01 << 4)) /* Charger present ? */
-		pcf50606_irq_call_handler(pcf, PCF50606_IRQ_CHGINS);
-
-	ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group);
-	if (ret)
-		dev_err(pcf->dev, "error creating sysfs entries\n");
-
-	if (pdata->probe_done)
-		pdata->probe_done(pcf);
-
-	return 0;
-
-err:
-	kfree(pcf);
-	return ret;
-}
-
-static int pcf50606_remove(struct i2c_client *client)
-{
-	struct pcf50606 *pcf = i2c_get_clientdata(client);
-
-	free_irq(pcf->irq, pcf);
-	kfree(pcf);
-
-	return 0;
-}
-
-static struct i2c_device_id pcf50606_id_table[] = {
-	{"pcf50606", 0x73},
-};
-
-static struct i2c_driver pcf50606_driver = {
-	.driver = {
-		.name	= "pcf50606",
-		.suspend = pcf50606_suspend,
-		.resume	= pcf50606_resume,
-	},
-	.id_table = pcf50606_id_table,
-	.probe = pcf50606_probe,
-	.remove = pcf50606_remove,
-};
-
-static int __init pcf50606_init(void)
-{
-	return i2c_add_driver(&pcf50606_driver);
-}
-
-static void pcf50606_exit(void)
-{
-	i2c_del_driver(&pcf50606_driver);
-}
-
-MODULE_DESCRIPTION("I2C chip driver for NXP PCF50606 PMU");
-MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
-MODULE_LICENSE("GPL");
-
-module_init(pcf50606_init);
-module_exit(pcf50606_exit);
diff --git a/drivers/mfd/pcf50606-gpo.c b/drivers/mfd/pcf50606-gpo.c
deleted file mode 100644
index 28b6d77ad80..00000000000
--- a/drivers/mfd/pcf50606-gpo.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* Philips PCF50606 GPO Driver
- *
- * (C) 2006-2008 by Openmoko, Inc.
- * Author: Balaji Rao <balajirrao@openmoko.org>
- * All rights reserved.
- *
- * Broken down from monstrous PCF50606 driver mainly by
- * Harald Welte, Andy Green and Werner Almesberger
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/mfd/pcf50606/core.h>
-#include <linux/mfd/pcf50606/gpo.h>
-#include <linux/mfd/pcf50606/pmic.h>
-
-void pcf50606_gpo_set_active(struct pcf50606 *pcf, int gpo, int val)
-{
-	u8 reg, value, mask;
-
-	reg = gpo;
-	value = val;
-	mask = 0x07;
-
-	if (gpo == PCF50606_GPO2) {
-		value = val << 4;
-		mask = 0x07 << 4;
-	}
-	pcf50606_reg_set_bit_mask(pcf, reg, mask, value);
-}
-EXPORT_SYMBOL_GPL(pcf50606_gpo_set_active);
-
-int pcf50606_gpo_get_active(struct pcf50606 *pcf, int gpo)
-{
-	u8 reg, value, shift = 0;
-
-	reg = gpo;
-	if (gpo == PCF50606_GPO2)
-		shift = 4;
-	
-	value = pcf50606_reg_read(pcf, reg);
-
-	return (value >> shift) & 0x07;
-}
-EXPORT_SYMBOL_GPL(pcf50606_gpo_get_active);
-
-void pcf50606_gpo_set_standby(struct pcf50606 *pcf, int gpo, int val)
-{
-	u8 reg;
-
-	if (gpo == PCF50606_GPO1 || gpo == PCF50606_GPO2) {
-		dev_err(pcf->dev, "Can't set standby settings for GPO[12]n");
-		return;
-	}
-
-	reg = gpo;
-
-	pcf50606_reg_set_bit_mask(pcf, gpo, 0x07 << 3, val);
-}
-EXPORT_SYMBOL_GPL(pcf50606_gpo_set_standby);
-
-int pcf50606_gpo_get_standby(struct pcf50606 *pcf, int gpo)
-{
-	u8 reg, value;
-
-	if (gpo == PCF50606_GPO1 || gpo == PCF50606_GPO2) {
-		dev_err(pcf->dev, "Can't get standby settings for GPO[12]n");
-		return -EINVAL;
-	}
-
-	reg = gpo;
-	value = pcf50606_reg_read(pcf, reg);
-
-	return (value >> 3) & 0x07;
-}
-EXPORT_SYMBOL_GPL(pcf50606_gpo_get_standby);
-
-void pcf50606_gpo_invert_set(struct pcf50606 *pcf, int gpo, int invert)
-{
-	u8 reg, value, mask;
-
-	reg = gpo;
-	value = !!invert << 6;
-	mask = 0x01 << 6;
-
-	if (gpo == PCF50606_GPO1) {
-		mask = 0x01 << 4;
-		value = !!invert << 4;
-	}
-	else if (gpo == PCF50606_GPO2) {
-		mask = 0x01 << 7;
-		value = !!invert << 7;
-	}
-
-	pcf50606_reg_set_bit_mask(pcf, reg, mask, value);
-}
-EXPORT_SYMBOL_GPL(pcf50606_gpo_invert_set);
-
-int pcf50606_gpo_invert_get(struct pcf50606 *pcf, int gpo)
-{
-	u8 reg, value, shift;
-
-	reg = gpo;
-	shift = 6;
-
-	if (gpo == PCF50606_GPO1)
-		shift = 4;
-	else if (gpo == PCF50606_GPO2)
-		shift = 7;
-
-	value =  pcf50606_reg_read(pcf, reg);
-
-	return (value >> shift) & 0x01;
-}
-EXPORT_SYMBOL_GPL(pcf50606_gpo_invert_get);
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
index e3d4eb1c03f..c2d05becfa9 100644
--- a/drivers/mfd/pcf50633-adc.c
+++ b/drivers/mfd/pcf50633-adc.c
@@ -1,4 +1,4 @@
-/* Philips PCF50633 ADC Driver
+/* NXP PCF50633 ADC Driver
  *
  * (C) 2006-2008 by Openmoko, Inc.
  * Author: Balaji Rao <balajirrao@openmoko.org>
@@ -7,26 +7,21 @@
  * Broken down from monstrous PCF50633 driver mainly by
  * Harald Welte, Andy Green and Werner Almesberger
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ *  NOTE: This driver does not yet support subtractive ADC mode, which means
+ *  you can do only one measurement per read request.
  */
 
-/* 
- * NOTE: This driver does not yet support subtractive ADC mode, which means
- * you can do only one measurement per read request. 
- */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
 
 #include <linux/mfd/pcf50633/core.h>
 #include <linux/mfd/pcf50633/adc.h>
@@ -43,8 +38,24 @@ struct pcf50633_adc_request {
 
 };
 
-static void adc_read_setup(struct pcf50633 *pcf,
-				 int channel, int avg)
+#define PCF50633_MAX_ADC_FIFO_DEPTH 8
+
+struct pcf50633_adc {
+	struct pcf50633 *pcf;
+
+	/* Private stuff */
+	struct pcf50633_adc_request *queue[PCF50633_MAX_ADC_FIFO_DEPTH];
+	int queue_head;
+	int queue_tail;
+	struct mutex queue_mutex;
+};
+
+static inline struct pcf50633_adc *__to_adc(struct pcf50633 *pcf)
+{
+	return platform_get_drvdata(pcf->adc_pdev);
+}
+
+static void adc_setup(struct pcf50633 *pcf, int channel, int avg)
 {
 	channel &= PCF50633_ADCC1_ADCMUX_MASK;
 
@@ -55,47 +66,46 @@ static void adc_read_setup(struct pcf50633 *pcf,
 	/* start ADC conversion on selected channel */
 	pcf50633_reg_write(pcf, PCF50633_REG_ADCC1, channel | avg |
 		    PCF50633_ADCC1_ADCSTART | PCF50633_ADCC1_RES_10BIT);
-
 }
 
 static void trigger_next_adc_job_if_any(struct pcf50633 *pcf)
 {
-	int head, tail;
+	struct pcf50633_adc *adc = __to_adc(pcf);
+	int head;
 
-	mutex_lock(&pcf->adc.queue_mutex);
+	mutex_lock(&adc->queue_mutex);
 
-	head = pcf->adc.queue_head;
-	tail = pcf->adc.queue_tail;
+	head = adc->queue_head;
 
-	if (!pcf->adc.queue[head])
-		goto out;
+	if (!adc->queue[head]) {
+		mutex_unlock(&adc->queue_mutex);
+		return;
+	}
+	mutex_unlock(&adc->queue_mutex);
 
-	adc_read_setup(pcf, pcf->adc.queue[head]->mux,
-				pcf->adc.queue[head]->avg);
-out:
-	mutex_unlock(&pcf->adc.queue_mutex);
+	adc_setup(pcf, adc->queue[head]->mux, adc->queue[head]->avg);
 }
 
 static int
 adc_enqueue_request(struct pcf50633 *pcf, struct pcf50633_adc_request *req)
 {
+	struct pcf50633_adc *adc = __to_adc(pcf);
 	int head, tail;
 
-	mutex_lock(&pcf->adc.queue_mutex);
-	head = pcf->adc.queue_head;
-	tail = pcf->adc.queue_tail;
+	mutex_lock(&adc->queue_mutex);
 
-	if (pcf->adc.queue[tail]) {
-		mutex_unlock(&pcf->adc.queue_mutex);
+	head = adc->queue_head;
+	tail = adc->queue_tail;
+
+	if (adc->queue[tail]) {
+		mutex_unlock(&adc->queue_mutex);
 		return -EBUSY;
 	}
 
-	pcf->adc.queue[tail] = req;
-
-	pcf->adc.queue_tail =
-		(tail + 1) & (PCF50633_MAX_ADC_FIFO_DEPTH - 1);
+	adc->queue[tail] = req;
+	adc->queue_tail = (tail + 1) & (PCF50633_MAX_ADC_FIFO_DEPTH - 1);
 
-	mutex_unlock(&pcf->adc.queue_mutex);
+	mutex_unlock(&adc->queue_mutex);
 
 	trigger_next_adc_job_if_any(pcf);
 
@@ -105,10 +115,7 @@ adc_enqueue_request(struct pcf50633 *pcf, struct pcf50633_adc_request *req)
 static void
 pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result)
 {
-	struct pcf50633_adc_request *req;
-
-	/*We know here that the passed param is an adc_request object */
-	req = (struct pcf50633_adc_request *)param;
+	struct pcf50633_adc_request *req = param;
 
 	req->result = result;
 	complete(&req->completion);
@@ -116,9 +123,7 @@ pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result)
 
 int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg)
 {
-
 	struct pcf50633_adc_request *req;
-	int result;
 
 	/* req is freed when the result is ready, in interrupt handler */
 	req = kzalloc(sizeof(*req), GFP_KERNEL);
@@ -129,14 +134,12 @@ int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg)
 	req->avg = avg;
 	req->callback =  pcf50633_adc_sync_read_callback;
 	req->callback_param = req;
-	init_completion(&req->completion);
 
+	init_completion(&req->completion);
 	adc_enqueue_request(pcf, req);
-
 	wait_for_completion(&req->completion);
-	result = req->result;
 
-	return result;
+	return req->result;
 }
 EXPORT_SYMBOL_GPL(pcf50633_adc_sync_read);
 
@@ -166,66 +169,88 @@ static int adc_result(struct pcf50633 *pcf)
 {
 	u8 adcs1, adcs3;
 	u16 result;
-	
+
 	adcs1 = pcf50633_reg_read(pcf, PCF50633_REG_ADCS1);
 	adcs3 = pcf50633_reg_read(pcf, PCF50633_REG_ADCS3);
 	result = (adcs1 << 2) | (adcs3 & PCF50633_ADCS3_ADCDAT1L_MASK);
 
-	dev_info(pcf->dev, "adc result = %d\n", result);
+	dev_dbg(pcf->dev, "adc result = %d\n", result);
 
 	return result;
 }
 
-static void pcf50633_adc_irq(struct pcf50633 *pcf, int irq, void *unused)
+static void pcf50633_adc_irq(int irq, void *data)
 {
+	struct pcf50633_adc *adc = data;
+	struct pcf50633 *pcf = adc->pcf;
 	struct pcf50633_adc_request *req;
 	int head;
 
-	mutex_lock(&pcf->adc.queue_mutex);
-	head = pcf->adc.queue_head;
+	mutex_lock(&adc->queue_mutex);
+	head = adc->queue_head;
 
-	req = pcf->adc.queue[head];
-	if (!req) {
-		dev_err(pcf->dev, "ADC queue empty\n");
-		mutex_unlock(&pcf->adc.queue_mutex);
+	req = adc->queue[head];
+	if (WARN_ON(!req)) {
+		dev_err(pcf->dev, "pcf50633-adc irq: ADC queue empty!\n");
+		mutex_unlock(&adc->queue_mutex);
 		return;
 	}
-	pcf->adc.queue[head] = NULL;
-	pcf->adc.queue_head = (head + 1) &
+	adc->queue[head] = NULL;
+	adc->queue_head = (head + 1) &
 				      (PCF50633_MAX_ADC_FIFO_DEPTH - 1);
 
-	mutex_unlock(&pcf->adc.queue_mutex);
-	req->callback(pcf, req->callback_param, adc_result(pcf));
+	mutex_unlock(&adc->queue_mutex);
 
+	req->callback(pcf, req->callback_param, adc_result(pcf));
 	kfree(req);
 
 	trigger_next_adc_job_if_any(pcf);
 }
 
-int __init pcf50633_adc_probe(struct platform_device *pdev)
+static int __devinit pcf50633_adc_probe(struct platform_device *pdev)
 {
-	struct pcf50633 *pcf;
+	struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
+	struct pcf50633_adc *adc;
+
+	adc = kzalloc(sizeof(*adc), GFP_KERNEL);
+	if (!adc)
+		return -ENOMEM;
 
-	pcf = platform_get_drvdata(pdev);
+	adc->pcf = pdata->pcf;
+	platform_set_drvdata(pdev, adc);
 
-	/* Set up IRQ handlers */
-	pcf->irq_handler[PCF50633_IRQ_ADCRDY].handler = pcf50633_adc_irq;
+	pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ADCRDY,
+					pcf50633_adc_irq, adc);
+
+	mutex_init(&adc->queue_mutex);
 
-	mutex_init(&pcf->adc.queue_mutex);
 	return 0;
 }
 
 static int __devexit pcf50633_adc_remove(struct platform_device *pdev)
 {
-	struct pcf50633 *pcf;
+	struct pcf50633_adc *adc = platform_get_drvdata(pdev);
+	int i, head;
+
+	pcf50633_free_irq(adc->pcf, PCF50633_IRQ_ADCRDY);
+
+	mutex_lock(&adc->queue_mutex);
+	head = adc->queue_head;
+
+	if (WARN_ON(adc->queue[head]))
+		dev_err(adc->pcf->dev,
+			"adc driver removed with request pending\n");
+
+	for (i = 0; i < PCF50633_MAX_ADC_FIFO_DEPTH; i++)
+		kfree(adc->queue[i]);
 
-	pcf = platform_get_drvdata(pdev);
-	pcf->irq_handler[PCF50633_IRQ_ADCRDY].handler = NULL;
+	mutex_unlock(&adc->queue_mutex);
+	kfree(adc);
 
 	return 0;
 }
 
-struct platform_driver pcf50633_adc_driver = {
+static struct platform_driver pcf50633_adc_driver = {
 	.driver = {
 		.name = "pcf50633-adc",
 	},
@@ -235,13 +260,13 @@ struct platform_driver pcf50633_adc_driver = {
 
 static int __init pcf50633_adc_init(void)
 {
-		return platform_driver_register(&pcf50633_adc_driver);
+	return platform_driver_register(&pcf50633_adc_driver);
 }
 module_init(pcf50633_adc_init);
 
 static void __exit pcf50633_adc_exit(void)
 {
-		platform_driver_unregister(&pcf50633_adc_driver);
+	platform_driver_unregister(&pcf50633_adc_driver);
 }
 module_exit(pcf50633_adc_exit);
 
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index f668b9a4e2a..c78dd994b25 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -1,45 +1,70 @@
-/* Philips PCF50633 Power Management Unit (PMU) driver
+/* NXP PCF50633 Power Management Unit (PMU) driver
  *
  * (C) 2006-2008 by Openmoko, Inc.
  * Author: Harald Welte <laforge@openmoko.org>
+ * 	   Balaji Rao <balajirrao@openmoko.org>
  * All rights reserved.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
  *
  */
-#include <linux/i2c.h>
-#include <linux/irq.h>
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
 #include <linux/device.h>
 #include <linux/module.h>
-#include <linux/reboot.h>
+#include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
 
 #include <linux/mfd/pcf50633/core.h>
 
+/* Two MBCS registers used during cold start */
+#define PCF50633_REG_MBCS1		0x4b
+#define PCF50633_REG_MBCS2		0x4c
+#define PCF50633_MBCS1_USBPRES 		0x01
+#define PCF50633_MBCS1_ADAPTPRES	0x01
+
+static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
+{
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(pcf->i2c_client, reg,
+				num, data);
+	if (ret < 0)
+		dev_err(pcf->dev, "Error reading %d regs at %d\n", num, reg);
+
+	return ret;
+}
+
+static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
+{
+	int ret;
+
+	ret = i2c_smbus_write_i2c_block_data(pcf->i2c_client, reg,
+				num, data);
+	if (ret < 0)
+		dev_err(pcf->dev, "Error writing %d regs at %d\n", num, reg);
+
+	return ret;
+
+}
+
 /* Read a block of upto 32 regs  */
-int pcf50633_read_block(struct pcf50633 *pcf , u8 reg,
+int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
 					int nr_regs, u8 *data)
 {
 	int ret;
 
 	mutex_lock(&pcf->lock);
-	ret = i2c_smbus_read_i2c_block_data(pcf->i2c_client, reg,
-							nr_regs, data);
+	ret = __pcf50633_read(pcf, reg, nr_regs, data);
 	mutex_unlock(&pcf->lock);
 
 	return ret;
@@ -53,8 +78,7 @@ int pcf50633_write_block(struct pcf50633 *pcf , u8 reg,
 	int ret;
 
 	mutex_lock(&pcf->lock);
-	ret = i2c_smbus_write_i2c_block_data(pcf->i2c_client, reg,
-							nr_regs, data);
+	ret = __pcf50633_write(pcf, reg, nr_regs, data);
 	mutex_unlock(&pcf->lock);
 
 	return ret;
@@ -63,21 +87,22 @@ EXPORT_SYMBOL_GPL(pcf50633_write_block);
 
 u8 pcf50633_reg_read(struct pcf50633 *pcf, u8 reg)
 {
-	int ret;
+	u8 val;
 
 	mutex_lock(&pcf->lock);
-	ret = i2c_smbus_read_byte_data(pcf->i2c_client, reg);
+	__pcf50633_read(pcf, reg, 1, &val);
 	mutex_unlock(&pcf->lock);
 
-	return ret;
+	return val;
 }
 EXPORT_SYMBOL_GPL(pcf50633_reg_read);
 
 int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val)
 {
 	int ret;
+
 	mutex_lock(&pcf->lock);
-	ret = i2c_smbus_write_byte_data(pcf->i2c_client, reg, val);
+	ret = __pcf50633_write(pcf, reg, 1, &val);
 	mutex_unlock(&pcf->lock);
 
 	return ret;
@@ -92,12 +117,15 @@ int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val)
 	val &= mask;
 
 	mutex_lock(&pcf->lock);
+	ret = __pcf50633_read(pcf, reg, 1, &tmp);
+	if (ret < 0)
+		goto out;
 
-	tmp = i2c_smbus_read_byte_data(pcf->i2c_client, reg);
 	tmp &= ~mask;
 	tmp |= val;
-	ret = i2c_smbus_write_byte_data(pcf->i2c_client, reg, tmp);
+	ret = __pcf50633_write(pcf, reg, 1, &tmp);
 
+out:
 	mutex_unlock(&pcf->lock);
 
 	return ret;
@@ -110,11 +138,14 @@ int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 val)
 	u8 tmp;
 
 	mutex_lock(&pcf->lock);
+	ret = __pcf50633_read(pcf, reg, 1, &tmp);
+	if (ret < 0)
+		goto out;
 
-	tmp = i2c_smbus_read_byte_data(pcf->i2c_client, reg);
 	tmp &= ~val;
-	ret = i2c_smbus_write_byte_data(pcf->i2c_client, reg, tmp);
+	ret = __pcf50633_write(pcf, reg, 1, &tmp);
 
+out:
 	mutex_unlock(&pcf->lock);
 
 	return ret;
@@ -184,43 +215,85 @@ static struct attribute_group pcf_attr_group = {
 	.attrs	= pcf_sysfs_entries,
 };
 
+int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
+			void (*handler) (int, void *), void *data)
+{
+	if (irq < 0 || irq > PCF50633_NUM_IRQ || !handler)
+		return -EINVAL;
+
+	if (WARN_ON(pcf->irq_handler[irq].handler))
+		return -EBUSY;
+
+	mutex_lock(&pcf->lock);
+	pcf->irq_handler[irq].handler = handler;
+	pcf->irq_handler[irq].data = data;
+	mutex_unlock(&pcf->lock);
 
-static int pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, int mask)
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pcf50633_register_irq);
+
+int pcf50633_free_irq(struct pcf50633 *pcf, int irq)
+{
+	if (irq < 0 || irq > PCF50633_NUM_IRQ)
+		return -EINVAL;
+
+	mutex_lock(&pcf->lock);
+	pcf->irq_handler[irq].handler = NULL;
+	mutex_unlock(&pcf->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pcf50633_free_irq);
+
+static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask)
 {
 	u8 reg, bits, tmp;
 	int ret = 0, idx;
 
-	idx = irq / 8;
+	idx = irq >> 3;
 	reg =  PCF50633_REG_INT1M + idx;
-	bits = 1 << (irq % 8);
+	bits = 1 << (irq & 0x07);
 
 	mutex_lock(&pcf->lock);
 
 	if (mask) {
-		tmp = i2c_smbus_read_byte_data(pcf->i2c_client, reg);
+		ret = __pcf50633_read(pcf, reg, 1, &tmp);
+		if (ret < 0)
+			goto out;
+
 		tmp |= bits;
-		ret = i2c_smbus_write_byte_data(pcf->i2c_client, reg, tmp);
+
+		ret = __pcf50633_write(pcf, reg, 1, &tmp);
+		if (ret < 0)
+			goto out;
 
 		pcf->mask_regs[idx] &= ~bits;
 		pcf->mask_regs[idx] |= bits;
 	} else {
-		tmp = i2c_smbus_read_byte_data(pcf->i2c_client, reg);
+		ret = __pcf50633_read(pcf, reg, 1, &tmp);
+		if (ret < 0)
+			goto out;
+
 		tmp &= ~bits;
-		ret = i2c_smbus_write_byte_data(pcf->i2c_client, reg, tmp);
+
+		ret = __pcf50633_write(pcf, reg, 1, &tmp);
+		if (ret < 0)
+			goto out;
 
 		pcf->mask_regs[idx] &= ~bits;
 	}
-
+out:
 	mutex_unlock(&pcf->lock);
 
-	return 0;
+	return ret;
 }
 
 int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)
 {
 	dev_info(pcf->dev, "Masking IRQ %d\n", irq);
 
-	return pcf50633_irq_mask_set(pcf, irq, 1);
+	return __pcf50633_irq_mask_set(pcf, irq, 1);
 }
 EXPORT_SYMBOL_GPL(pcf50633_irq_mask);
 
@@ -228,7 +301,7 @@ int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq)
 {
 	dev_info(pcf->dev, "Unmasking IRQ %d\n", irq);
 
-	return pcf50633_irq_mask_set(pcf, irq, 0);
+	return __pcf50633_irq_mask_set(pcf, irq, 0);
 }
 EXPORT_SYMBOL_GPL(pcf50633_irq_unmask);
 
@@ -236,22 +309,20 @@ int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq)
 {
 	u8 reg, bits;
 
-	reg =  (irq / 8);
-	bits = (1 << (irq % 8));
+	reg =  irq >> 3;
+	bits = 1 << (irq & 0x07);
 
 	return pcf->mask_regs[reg] & bits;
 }
 EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get);
 
-static void pcf50633_irq_call_handler(struct pcf50633 *pcf,
-					int irq)
+static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq)
 {
-	if (pcf->irq_handler[irq].handler) {
-		pcf->irq_handler[irq].handler(pcf, irq,
-					pcf->irq_handler[irq].data);
-	}
+	if (pcf->irq_handler[irq].handler)
+		pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data);
 }
 
+/* Maximum amount of time ONKEY is held before emergency action is taken */
 #define PCF50633_ONKEY1S_TIMEOUT 8
 
 static void pcf50633_irq_worker(struct work_struct *work)
@@ -264,20 +335,21 @@ static void pcf50633_irq_worker(struct work_struct *work)
 
 	/* Read the 5 INT regs in one transaction */
 	ret = pcf50633_read_block(pcf, PCF50633_REG_INT1,
-						sizeof(pcf_int), pcf_int);
-	if (ret != sizeof(pcf_int)) {
-		dev_info(pcf->dev, "Error reading INT registers\n");
+						ARRAY_SIZE(pcf_int), pcf_int);
+	if (ret != ARRAY_SIZE(pcf_int)) {
+		dev_err(pcf->dev, "Error reading INT registers\n");
 
-		/* We don't have an option but to retry. Because if
-		 * we don't, there won't be another interrupt edge.
+		/*
+		 * If this doesn't ACK the interrupt to the chip, we'll be
+		 * called once again as we're level triggered.
 		 */
-		goto reschedule;
+		goto out;
 	}
 
 	pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN,	0x04 );  /* defeat 8s death from lowsys on A5 */
 
 	/* We immediately read the usb and adapter status. We thus make sure
-	 * only of USBINS/USBREM and ADAPINS/ADPREM IRQ handlers are called */
+	 * only of USBINS/USBREM IRQ handlers are called */
 	if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
 		chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
 		if (chgstat & (0x3 << 4))
@@ -286,6 +358,7 @@ static void pcf50633_irq_worker(struct work_struct *work)
 			pcf_int[0] &= ~(1 << PCF50633_INT1_USBINS);
 	}
 
+	/* Make sure only one of ADPINS or ADPREM is set */
 	if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) {
 		chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
 		if (chgstat & (0x3 << 4))
@@ -294,13 +367,12 @@ static void pcf50633_irq_worker(struct work_struct *work)
 			pcf_int[0] &= ~(1 << PCF50633_INT1_ADPINS);
 	}
 
-	dev_info(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x "
+	dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x "
 			"INT4=0x%02x INT5=0x%02x\n", pcf_int[0],
 			pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]);
 
 	/* Some revisions of the chip don't have a 8s standby mode on
 	 * ONKEY1S press. We try to manually do it in such cases. */
-
 	if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) {
 		dev_info(pcf->dev, "ONKEY1S held for %d secs\n",
 							pcf->onkey1s_held);
@@ -341,7 +413,6 @@ static void pcf50633_irq_worker(struct work_struct *work)
 
 	/* Have we just resumed ? */
 	if (pcf->is_suspended) {
-
 		pcf->is_suspended = 0;
 
 		/* Set the resume reason filtering out non resumers */
@@ -351,22 +422,26 @@ static void pcf50633_irq_worker(struct work_struct *work)
 
 		/* Make sure we don't pass on any ONKEY events to
 		 * userspace now */
-		pcf_int[1] &= ~ (PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF);
+		pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF);
 	}
 
-	/* Unset masked interrupts */
 	for (i = 0; i < ARRAY_SIZE(pcf_int); i++) {
+		/* Unset masked interrupts */
 		pcf_int[i] &= ~pcf->mask_regs[i];
+
 		for (j = 0; j < 8 ; j++)
 			if (pcf_int[i] & (1 << j))
 				pcf50633_irq_call_handler(pcf, (i * 8) + j);
 	}
 
+out:
 	put_device(pcf->dev);
+	enable_irq(pcf->irq);
 
 	enable_irq(pcf->irq);
 
 	return;
+
 reschedule:
 	schedule_work(&pcf->irq_work);
 
@@ -392,20 +467,28 @@ static void
 pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
 						struct platform_device **pdev)
 {
+	struct pcf50633_subdev_pdata *subdev_pdata;
 	int ret;
 
 	*pdev = platform_device_alloc(name, -1);
-
-	if (!pdev) {
+	if (!*pdev) {
 		dev_err(pcf->dev, "Falied to allocate %s\n", name);
 		return;
 	}
 
+	subdev_pdata = kmalloc(sizeof(*subdev_pdata), GFP_KERNEL);
+	if (!subdev_pdata) {
+		dev_err(pcf->dev, "Error allocating subdev pdata\n");
+		platform_device_put(*pdev);
+	}
+
+	subdev_pdata->pcf = pcf;
+	platform_device_add_data(*pdev, subdev_pdata, sizeof(*subdev_pdata));
+
 	(*pdev)->dev.parent = pcf->dev;
-	platform_set_drvdata(*pdev, pcf);
 
 	ret = platform_device_add(*pdev);
-	if (ret != 0) {
+	if (ret) {
 		dev_err(pcf->dev, "Failed to register %s: %d\n", name, ret);
 		platform_device_put(*pdev);
 		*pdev = NULL;
@@ -416,7 +499,7 @@ pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
 static int pcf50633_suspend(struct device *dev, pm_message_t state)
 {
 	struct pcf50633 *pcf;
-	int ret, i;
+	int ret = 0, i;
 	u8 res[5];
 
 	pcf = dev_get_drvdata(dev);
@@ -425,39 +508,51 @@ static int pcf50633_suspend(struct device *dev, pm_message_t state)
 	 * henceforth */
 	disable_irq(pcf->irq);
 
-	/* Make sure that an IRQ worker has quit */
+	/* Make sure that any running IRQ worker has quit */
 	cancel_work_sync(&pcf->irq_work);
 
 	/* Save the masks */
 	ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M,
 				ARRAY_SIZE(pcf->suspend_irq_masks),
 					pcf->suspend_irq_masks);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_err(pcf->dev, "error saving irq masks\n");
+		goto out;
+	}
 
-	/* Set interrupt masks. So that only those sources we want to wake
-	 * us up can
-	 */
+	/* Write wakeup irq masks */
 	for (i = 0; i < ARRAY_SIZE(res); i++)
 		res[i] = ~pcf->pdata->resumers[i];
 
-	pcf50633_write_block(pcf, PCF50633_REG_INT1M, ARRAY_SIZE(res), &res[0]);
+	ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
+					ARRAY_SIZE(res), &res[0]);
+	if (ret < 0) {
+		dev_err(pcf->dev, "error writing wakeup irq masks\n");
+		goto out;
+	}
 
 	pcf->is_suspended = 1;
 
-	return 0;
+out:
+	return ret;
 }
 
 static int pcf50633_resume(struct device *dev)
 {
 	struct pcf50633 *pcf;
+	int ret;
 
 	pcf = dev_get_drvdata(dev);
 
 	/* Write the saved mask registers */
-	pcf50633_write_block(pcf, PCF50633_REG_INT1M,
+	ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
 				ARRAY_SIZE(pcf->suspend_irq_masks),
 					pcf->suspend_irq_masks);
+	if (ret < 0)
+		dev_err(pcf->dev, "Error restoring saved suspend masks\n");
+
+	/* Restore regulators' state */
+
 
 	get_device(pcf->dev);
 
@@ -474,66 +569,62 @@ static int pcf50633_resume(struct device *dev)
 #define pcf50633_resume NULL
 #endif
 
-static int pcf50633_probe(struct i2c_client *client,
+static int __devinit pcf50633_probe(struct i2c_client *client,
 				const struct i2c_device_id *ids)
 {
 	struct pcf50633 *pcf;
-	struct pcf50633_platform_data *pdata;
+	struct pcf50633_platform_data *pdata = client->dev.platform_data;
 	int i, ret = 0;
-	int version;
-	int variant;
+	int version, variant;
+	int irqf = IRQF_TRIGGER_LOW;
 
-	pdata = client->dev.platform_data;
+	if (machine_is_openmoko_gta03())
+		irqf = IRQF_TRIGGER_FALLING;
 
 	pcf = kzalloc(sizeof(*pcf), GFP_KERNEL);
 	if (!pcf)
 		return -ENOMEM;
 
 	pcf->pdata = pdata;
-	pdata->pcf = pcf;
 
 	mutex_init(&pcf->lock);
 
 	i2c_set_clientdata(client, pcf);
 	pcf->dev = &client->dev;
 	pcf->i2c_client = client;
+	pcf->irq = client->irq;
 
 	INIT_WORK(&pcf->irq_work, pcf50633_irq_worker);
 
 	version = pcf50633_reg_read(pcf, 0);
-	if (version < 0) {
-		dev_err(pcf->dev, "Unable to probe pcf50633\n");
-		kfree(pcf);
-		return -ENODEV;
-	}
-
 	variant = pcf50633_reg_read(pcf, 1);
-	if (variant < 0) {
+	if (version < 0 || variant < 0) {
 		dev_err(pcf->dev, "Unable to probe pcf50633\n");
-		kfree(pcf);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err;
 	}
 
 	dev_info(pcf->dev, "Probed device version %d variant %d\n",
 							version, variant);
 
-	/* Enable all inteerupts except RTC SECOND */
+	/* Enable all interrupts except RTC SECOND */
 	pcf->mask_regs[0] = 0x80;
-	pcf50633_reg_write(pcf, PCF50633_REG_INT1M, 0x80);
-
+	pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]);
 	pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00);
 	pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00);
 	pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00);
 	pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00);
 
+	/* Create sub devices */
 	pcf50633_client_dev_register(pcf, "pcf50633-input",
-						&pcf->input.pdev);
+						&pcf->input_pdev);
 	pcf50633_client_dev_register(pcf, "pcf50633-rtc",
-						&pcf->rtc.pdev);
+						&pcf->rtc_pdev);
 	pcf50633_client_dev_register(pcf, "pcf50633-mbc",
-						&pcf->mbc.pdev);
+						&pcf->mbc_pdev);
 	pcf50633_client_dev_register(pcf, "pcf50633-adc",
-						&pcf->adc.pdev);
+						&pcf->adc_pdev);
+
 	for (i = 0; i < PCF50633_NUM_REGULATORS; i++) {
 		struct platform_device *pdev;
 
@@ -546,14 +637,13 @@ static int pcf50633_probe(struct i2c_client *client,
 		pdev->dev.parent = pcf->dev;
 		pdev->dev.platform_data = &pdata->reg_init_data[i];
 		pdev->dev.driver_data = pcf;
-		pcf->pmic.pdev[i] = pdev;
+		pcf->regulator_pdev[i] = pdev;
 
 		platform_device_add(pdev);
 	}
 
-	pcf->irq = client->irq;
-
 	if (client->irq) {
+		set_irq_handler(client->irq, handle_level_irq);
 		ret = request_irq(client->irq, pcf50633_irq,
 				IRQF_TRIGGER_LOW, "pcf50633", pcf);
 
@@ -584,11 +674,21 @@ err:
 	return ret;
 }
 
-static int pcf50633_remove(struct i2c_client *client)
+static int __devexit pcf50633_remove(struct i2c_client *client)
 {
 	struct pcf50633 *pcf = i2c_get_clientdata(client);
+	int i;
 
 	free_irq(pcf->irq, pcf);
+
+	platform_device_unregister(pcf->input_pdev);
+	platform_device_unregister(pcf->rtc_pdev);
+	platform_device_unregister(pcf->mbc_pdev);
+	platform_device_unregister(pcf->adc_pdev);
+
+	for (i = 0; i < PCF50633_NUM_REGULATORS; i++)
+		platform_device_unregister(pcf->regulator_pdev[i]);
+
 	kfree(pcf);
 
 	return 0;
@@ -606,7 +706,7 @@ static struct i2c_driver pcf50633_driver = {
 	},
 	.id_table = pcf50633_id_table,
 	.probe = pcf50633_probe,
-	.remove = pcf50633_remove,
+	.remove = __devexit_p(pcf50633_remove),
 };
 
 static int __init pcf50633_init(void)
@@ -614,7 +714,7 @@ static int __init pcf50633_init(void)
 	return i2c_add_driver(&pcf50633_driver);
 }
 
-static void pcf50633_exit(void)
+static void __exit pcf50633_exit(void)
 {
 	i2c_del_driver(&pcf50633_driver);
 }
diff --git a/drivers/mfd/pcf50633-gpio.c b/drivers/mfd/pcf50633-gpio.c
index 55139071d22..2fa2eca5c9c 100644
--- a/drivers/mfd/pcf50633-gpio.c
+++ b/drivers/mfd/pcf50633-gpio.c
@@ -1,4 +1,4 @@
-/* Philips PCF50633 GPIO Driver
+/* NXP PCF50633 GPIO Driver
  *
  * (C) 2006-2008 by Openmoko, Inc.
  * Author: Balaji Rao <balajirrao@openmoko.org>
@@ -7,37 +7,69 @@
  * Broken down from monstrous PCF50633 driver mainly by
  * Harald Welte, Andy Green and Werner Almesberger
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
  */
 
+#include <linux/kernel.h>
+
 #include <linux/mfd/pcf50633/core.h>
 #include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/pmic.h>
 
-void pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, int val)
+enum pcf50633_regulator_id {
+	PCF50633_REGULATOR_AUTO,
+	PCF50633_REGULATOR_DOWN1,
+	PCF50633_REGULATOR_DOWN2,
+	PCF50633_REGULATOR_LDO1,
+	PCF50633_REGULATOR_LDO2,
+	PCF50633_REGULATOR_LDO3,
+	PCF50633_REGULATOR_LDO4,
+	PCF50633_REGULATOR_LDO5,
+	PCF50633_REGULATOR_LDO6,
+	PCF50633_REGULATOR_HCLDO,
+	PCF50633_REGULATOR_MEMLDO,
+};
+
+#define PCF50633_REG_AUTOOUT	0x1a
+#define PCF50633_REG_DOWN1OUT	0x1e
+#define PCF50633_REG_DOWN2OUT	0x22
+#define PCF50633_REG_MEMLDOOUT	0x26
+#define PCF50633_REG_LDO1OUT	0x2d
+#define PCF50633_REG_LDO2OUT	0x2f
+#define PCF50633_REG_LDO3OUT	0x31
+#define PCF50633_REG_LDO4OUT	0x33
+#define PCF50633_REG_LDO5OUT	0x35
+#define PCF50633_REG_LDO6OUT	0x37
+#define PCF50633_REG_HCLDOOUT	0x39
+
+static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = {
+	[PCF50633_REGULATOR_AUTO]	= PCF50633_REG_AUTOOUT,
+	[PCF50633_REGULATOR_DOWN1]	= PCF50633_REG_DOWN1OUT,
+	[PCF50633_REGULATOR_DOWN2]	= PCF50633_REG_DOWN2OUT,
+	[PCF50633_REGULATOR_MEMLDO]	= PCF50633_REG_MEMLDOOUT,
+	[PCF50633_REGULATOR_LDO1]	= PCF50633_REG_LDO1OUT,
+	[PCF50633_REGULATOR_LDO2]	= PCF50633_REG_LDO2OUT,
+	[PCF50633_REGULATOR_LDO3]	= PCF50633_REG_LDO3OUT,
+	[PCF50633_REGULATOR_LDO4]	= PCF50633_REG_LDO4OUT,
+	[PCF50633_REGULATOR_LDO5]	= PCF50633_REG_LDO5OUT,
+	[PCF50633_REGULATOR_LDO6]	= PCF50633_REG_LDO6OUT,
+	[PCF50633_REGULATOR_HCLDO]	= PCF50633_REG_HCLDOOUT,
+};
+
+int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val)
 {
 	u8 reg;
 
 	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
 
-	pcf50633_reg_set_bit_mask(pcf, reg, 0x07, val);
+	return pcf50633_reg_set_bit_mask(pcf, reg, 0x07, val);
 }
 EXPORT_SYMBOL_GPL(pcf50633_gpio_set);
 
-int pcf50633_gpio_get(struct pcf50633 *pcf, int gpio)
+u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio)
 {
 	u8 reg, val;
 
@@ -48,14 +80,14 @@ int pcf50633_gpio_get(struct pcf50633 *pcf, int gpio)
 }
 EXPORT_SYMBOL_GPL(pcf50633_gpio_get);
 
-void pcf50633_gpio_invert_set(struct pcf50633 *pcf, int gpio, int invert)
+int pcf50633_gpio_invert_set(struct pcf50633 *pcf, int gpio, int invert)
 {
 	u8 val, reg;
 
 	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
 	val = !!invert << 3;
 
-	pcf50633_reg_set_bit_mask(pcf, reg, 1 << 3, val);
+	return pcf50633_reg_set_bit_mask(pcf, reg, 1 << 3, val);
 }
 EXPORT_SYMBOL_GPL(pcf50633_gpio_invert_set);
 
@@ -70,21 +102,7 @@ int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio)
 }
 EXPORT_SYMBOL_GPL(pcf50633_gpio_invert_get);
 
-static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = {
-	[PCF50633_REGULATOR_AUTO]	= PCF50633_REG_AUTOOUT,
-	[PCF50633_REGULATOR_DOWN1]	= PCF50633_REG_DOWN1OUT,
-	[PCF50633_REGULATOR_DOWN2]	= PCF50633_REG_DOWN2OUT,
-	[PCF50633_REGULATOR_MEMLDO]	= PCF50633_REG_MEMLDOOUT,
-	[PCF50633_REGULATOR_LDO1]	= PCF50633_REG_LDO1OUT,
-	[PCF50633_REGULATOR_LDO2]	= PCF50633_REG_LDO2OUT,
-	[PCF50633_REGULATOR_LDO3]	= PCF50633_REG_LDO3OUT,
-	[PCF50633_REGULATOR_LDO4]	= PCF50633_REG_LDO4OUT,
-	[PCF50633_REGULATOR_LDO5]	= PCF50633_REG_LDO5OUT,
-	[PCF50633_REGULATOR_LDO6]	= PCF50633_REG_LDO6OUT,
-	[PCF50633_REGULATOR_HCLDO]	= PCF50633_REG_HCLDOOUT,
-};
-
-void pcf50633_gpio_power_supply_set(struct pcf50633 *pcf,
+int pcf50633_gpio_power_supply_set(struct pcf50633 *pcf,
 					int gpio, int regulator, int on)
 {
 	u8 reg, val, mask;
@@ -92,9 +110,9 @@ void pcf50633_gpio_power_supply_set(struct pcf50633 *pcf,
 	/* the *ENA register is always one after the *OUT register */
 	reg = pcf50633_regulator_registers[regulator] + 1;
 
-	val = (!!on << (gpio - PCF50633_GPIO1));
-	mask = (1 << (gpio - PCF50633_GPIO1));
+	val = !!on << (gpio - PCF50633_GPIO1);
+	mask = 1 << (gpio - PCF50633_GPIO1);
 
-	pcf50633_reg_set_bit_mask(pcf, reg, mask, val);
+	return pcf50633_reg_set_bit_mask(pcf, reg, mask, val);
 }
 EXPORT_SYMBOL_GPL(pcf50633_gpio_power_supply_set);
diff --git a/drivers/mfd/pcf50633-i2c.c b/drivers/mfd/pcf50633-i2c.c
deleted file mode 100644
index 71912691238..00000000000
--- a/drivers/mfd/pcf50633-i2c.c
+++ /dev/null
@@ -1,3 +0,0 @@
-
-};
-
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 170f9d47c2f..0e5761f1263 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -41,6 +41,7 @@ struct sm501_gpio_chip {
 	struct gpio_chip	gpio;
 	struct sm501_gpio	*ourgpio;	/* to get back to parent. */
 	void __iomem		*regbase;
+	void __iomem		*control;	/* address of control reg. */
 };
 
 struct sm501_gpio {
@@ -908,6 +909,25 @@ static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return result & 1UL;
 }
 
+static void sm501_gpio_ensure_gpio(struct sm501_gpio_chip *smchip,
+				   unsigned long bit)
+{
+	unsigned long ctrl;
+
+	/* check and modify if this pin is not set as gpio. */
+
+	if (readl(smchip->control) & bit) {
+		dev_info(sm501_gpio_to_dev(smchip->ourgpio)->dev,
+			 "changing mode of gpio, bit %08lx\n", bit);
+
+		ctrl = readl(smchip->control);
+		ctrl &= ~bit;
+		writel(ctrl, smchip->control);
+
+		sm501_sync_regs(sm501_gpio_to_dev(smchip->ourgpio));
+	}
+}
+
 static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 
 {
@@ -929,6 +949,8 @@ static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	writel(val, regs);
 
 	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	sm501_gpio_ensure_gpio(smchip, bit);
+
 	spin_unlock_irqrestore(&smgpio->lock, save);
 }
 
@@ -941,8 +963,8 @@ static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
 	unsigned long save;
 	unsigned long ddr;
 
-	dev_info(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
-		 __func__, chip, offset);
+	dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
+		__func__, chip, offset);
 
 	spin_lock_irqsave(&smgpio->lock, save);
 
@@ -950,6 +972,8 @@ static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
 	writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
 
 	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	sm501_gpio_ensure_gpio(smchip, bit);
+
 	spin_unlock_irqrestore(&smgpio->lock, save);
 
 	return 0;
@@ -1012,9 +1036,11 @@ static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
 		if (base > 0)
 			base += 32;
 		chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
+		chip->control = sm->regs + SM501_GPIO63_32_CONTROL;
 		gchip->label  = "SM501-HIGH";
 	} else {
 		chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW;
+		chip->control = sm->regs + SM501_GPIO31_0_CONTROL;
 		gchip->label  = "SM501-LOW";
 	}
 
diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
new file mode 100644
index 00000000000..acf8b9d5f57
--- /dev/null
+++ b/drivers/mfd/tps65010.c
@@ -0,0 +1,1072 @@
+/*
+ * tps65010 - driver for tps6501x power management chips
+ *
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004-2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c/tps65010.h>
+
+#include <asm/gpio.h>
+
+
+/*-------------------------------------------------------------------------*/
+
+#define	DRIVER_VERSION	"2 May 2005"
+#define	DRIVER_NAME	(tps65010_driver.driver.name)
+
+MODULE_DESCRIPTION("TPS6501x Power Management Driver");
+MODULE_LICENSE("GPL");
+
+static struct i2c_driver tps65010_driver;
+
+/*-------------------------------------------------------------------------*/
+
+/* This driver handles a family of multipurpose chips, which incorporate
+ * voltage regulators, lithium ion/polymer battery charging, GPIOs, LEDs,
+ * and other features often needed in portable devices like cell phones
+ * or digital cameras.
+ *
+ * The tps65011 and tps65013 have different voltage settings compared
+ * to tps65010 and tps65012.  The tps65013 has a NO_CHG status/irq.
+ * All except tps65010 have "wait" mode, possibly defaulted so that
+ * battery-insert != device-on.
+ *
+ * We could distinguish between some models by checking VDCDC1.UVLO or
+ * other registers, unless they've been changed already after powerup
+ * as part of board setup by a bootloader.
+ */
+enum tps_model {
+	TPS65010,
+	TPS65011,
+	TPS65012,
+	TPS65013,
+};
+
+struct tps65010 {
+	struct i2c_client	*client;
+	struct mutex		lock;
+	struct delayed_work	work;
+	struct dentry		*file;
+	unsigned		charging:1;
+	unsigned		por:1;
+	unsigned		model:8;
+	u16			vbus;
+	unsigned long		flags;
+#define	FLAG_VBUS_CHANGED	0
+#define	FLAG_IRQ_ENABLE		1
+
+	/* copies of last register state */
+	u8			chgstatus, regstatus, chgconf;
+	u8			nmask1, nmask2;
+
+	u8			outmask;
+	struct gpio_chip	chip;
+	struct platform_device	*leds;
+};
+
+#define	POWER_POLL_DELAY	msecs_to_jiffies(5000)
+
+/*-------------------------------------------------------------------------*/
+
+#if	defined(DEBUG) || defined(CONFIG_DEBUG_FS)
+
+static void dbg_chgstat(char *buf, size_t len, u8 chgstatus)
+{
+	snprintf(buf, len, "%02x%s%s%s%s%s%s%s%s\n",
+		chgstatus,
+		(chgstatus & TPS_CHG_USB) ? " USB" : "",
+		(chgstatus & TPS_CHG_AC) ? " AC" : "",
+		(chgstatus & TPS_CHG_THERM) ? " therm" : "",
+		(chgstatus & TPS_CHG_TERM) ? " done" :
+			((chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
+				? " (charging)" : ""),
+		(chgstatus & TPS_CHG_TAPER_TMO) ? " taper_tmo" : "",
+		(chgstatus & TPS_CHG_CHG_TMO) ? " charge_tmo" : "",
+		(chgstatus & TPS_CHG_PRECHG_TMO) ? " prechg_tmo" : "",
+		(chgstatus & TPS_CHG_TEMP_ERR) ? " temp_err" : "");
+}
+
+static void dbg_regstat(char *buf, size_t len, u8 regstatus)
+{
+	snprintf(buf, len, "%02x %s%s%s%s%s%s%s%s\n",
+		regstatus,
+		(regstatus & TPS_REG_ONOFF) ? "off" : "(on)",
+		(regstatus & TPS_REG_COVER) ? " uncover" : "",
+		(regstatus & TPS_REG_UVLO) ? " UVLO" : "",
+		(regstatus & TPS_REG_NO_CHG) ? " NO_CHG" : "",
+		(regstatus & TPS_REG_PG_LD02) ? " ld02_bad" : "",
+		(regstatus & TPS_REG_PG_LD01) ? " ld01_bad" : "",
+		(regstatus & TPS_REG_PG_MAIN) ? " main_bad" : "",
+		(regstatus & TPS_REG_PG_CORE) ? " core_bad" : "");
+}
+
+static void dbg_chgconf(int por, char *buf, size_t len, u8 chgconfig)
+{
+	const char *hibit;
+
+	if (por)
+		hibit = (chgconfig & TPS_CHARGE_POR)
+				? "POR=69ms" : "POR=1sec";
+	else
+		hibit = (chgconfig & TPS65013_AUA) ? "AUA" : "";
+
+	snprintf(buf, len, "%02x %s%s%s AC=%d%% USB=%dmA %sCharge\n",
+		chgconfig, hibit,
+		(chgconfig & TPS_CHARGE_RESET) ? " reset" : "",
+		(chgconfig & TPS_CHARGE_FAST) ? " fast" : "",
+		({int p; switch ((chgconfig >> 3) & 3) {
+		case 3:		p = 100; break;
+		case 2:		p = 75; break;
+		case 1:		p = 50; break;
+		default:	p = 25; break;
+		}; p; }),
+		(chgconfig & TPS_VBUS_CHARGING)
+			? ((chgconfig & TPS_VBUS_500MA) ? 500 : 100)
+			: 0,
+		(chgconfig & TPS_CHARGE_ENABLE) ? "" : "No");
+}
+
+#endif
+
+#ifdef	DEBUG
+
+static void show_chgstatus(const char *label, u8 chgstatus)
+{
+	char buf [100];
+
+	dbg_chgstat(buf, sizeof buf, chgstatus);
+	pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
+}
+
+static void show_regstatus(const char *label, u8 regstatus)
+{
+	char buf [100];
+
+	dbg_regstat(buf, sizeof buf, regstatus);
+	pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
+}
+
+static void show_chgconfig(int por, const char *label, u8 chgconfig)
+{
+	char buf [100];
+
+	dbg_chgconf(por, buf, sizeof buf, chgconfig);
+	pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
+}
+
+#else
+
+static inline void show_chgstatus(const char *label, u8 chgstatus) { }
+static inline void show_regstatus(const char *label, u8 chgstatus) { }
+static inline void show_chgconfig(int por, const char *label, u8 chgconfig) { }
+
+#endif
+
+#ifdef	CONFIG_DEBUG_FS
+
+static int dbg_show(struct seq_file *s, void *_)
+{
+	struct tps65010	*tps = s->private;
+	u8		value, v2;
+	unsigned	i;
+	char		buf[100];
+	const char	*chip;
+
+	switch (tps->model) {
+	case TPS65010:	chip = "tps65010"; break;
+	case TPS65011:	chip = "tps65011"; break;
+	case TPS65012:	chip = "tps65012"; break;
+	case TPS65013:	chip = "tps65013"; break;
+	default:	chip = NULL; break;
+	}
+	seq_printf(s, "driver  %s\nversion %s\nchip    %s\n\n",
+			DRIVER_NAME, DRIVER_VERSION, chip);
+
+	mutex_lock(&tps->lock);
+
+	/* FIXME how can we tell whether a battery is present?
+	 * likely involves a charge gauging chip (like BQ26501).
+	 */
+
+	seq_printf(s, "%scharging\n\n", tps->charging ? "" : "(not) ");
+
+
+	/* registers for monitoring battery charging and status; note
+	 * that reading chgstat and regstat may ack IRQs...
+	 */
+	value = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG);
+	dbg_chgconf(tps->por, buf, sizeof buf, value);
+	seq_printf(s, "chgconfig %s", buf);
+
+	value = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS);
+	dbg_chgstat(buf, sizeof buf, value);
+	seq_printf(s, "chgstat   %s", buf);
+	value = i2c_smbus_read_byte_data(tps->client, TPS_MASK1);
+	dbg_chgstat(buf, sizeof buf, value);
+	seq_printf(s, "mask1     %s", buf);
+	/* ignore ackint1 */
+
+	value = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS);
+	dbg_regstat(buf, sizeof buf, value);
+	seq_printf(s, "regstat   %s", buf);
+	value = i2c_smbus_read_byte_data(tps->client, TPS_MASK2);
+	dbg_regstat(buf, sizeof buf, value);
+	seq_printf(s, "mask2     %s\n", buf);
+	/* ignore ackint2 */
+
+	(void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
+
+
+	/* VMAIN voltage, enable lowpower, etc */
+	value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC1);
+	seq_printf(s, "vdcdc1    %02x\n", value);
+
+	/* VCORE voltage, vibrator on/off */
+	value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC2);
+	seq_printf(s, "vdcdc2    %02x\n", value);
+
+	/* both LD0s, and their lowpower behavior */
+	value = i2c_smbus_read_byte_data(tps->client, TPS_VREGS1);
+	seq_printf(s, "vregs1    %02x\n\n", value);
+
+
+	/* LEDs and GPIOs */
+	value = i2c_smbus_read_byte_data(tps->client, TPS_LED1_ON);
+	v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED1_PER);
+	seq_printf(s, "led1 %s, on=%02x, per=%02x, %d/%d msec\n",
+		(value & 0x80)
+			? ((v2 & 0x80) ? "on" : "off")
+			: ((v2 & 0x80) ? "blink" : "(nPG)"),
+		value, v2,
+		(value & 0x7f) * 10, (v2 & 0x7f) * 100);
+
+	value = i2c_smbus_read_byte_data(tps->client, TPS_LED2_ON);
+	v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED2_PER);
+	seq_printf(s, "led2 %s, on=%02x, per=%02x, %d/%d msec\n",
+		(value & 0x80)
+			? ((v2 & 0x80) ? "on" : "off")
+			: ((v2 & 0x80) ? "blink" : "off"),
+		value, v2,
+		(value & 0x7f) * 10, (v2 & 0x7f) * 100);
+
+	value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
+	v2 = i2c_smbus_read_byte_data(tps->client, TPS_MASK3);
+	seq_printf(s, "defgpio %02x mask3 %02x\n", value, v2);
+
+	for (i = 0; i < 4; i++) {
+		if (value & (1 << (4 + i)))
+			seq_printf(s, "  gpio%d-out %s\n", i + 1,
+				(value & (1 << i)) ? "low" : "hi ");
+		else
+			seq_printf(s, "  gpio%d-in  %s %s %s\n", i + 1,
+				(value & (1 << i)) ? "hi " : "low",
+				(v2 & (1 << i)) ? "no-irq" : "irq",
+				(v2 & (1 << (4 + i))) ? "rising" : "falling");
+	}
+
+	mutex_unlock(&tps->lock);
+	return 0;
+}
+
+static int dbg_tps_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dbg_show, inode->i_private);
+}
+
+static const struct file_operations debug_fops = {
+	.open		= dbg_tps_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+#define	DEBUG_FOPS	&debug_fops
+
+#else
+#define	DEBUG_FOPS	NULL
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* handle IRQS in a task context, so we can use I2C calls */
+static void tps65010_interrupt(struct tps65010 *tps)
+{
+	u8 tmp = 0, mask, poll;
+
+	/* IRQs won't trigger for certain events, but we can get
+	 * others by polling (normally, with external power applied).
+	 */
+	poll = 0;
+
+	/* regstatus irqs */
+	if (tps->nmask2) {
+		tmp = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS);
+		mask = tmp ^ tps->regstatus;
+		tps->regstatus = tmp;
+		mask &= tps->nmask2;
+	} else
+		mask = 0;
+	if (mask) {
+		tps->regstatus =  tmp;
+		/* may need to shut something down ... */
+
+		/* "off" usually means deep sleep */
+		if (tmp & TPS_REG_ONOFF) {
+			pr_info("%s: power off button\n", DRIVER_NAME);
+#if 0
+			/* REVISIT:  this might need its own workqueue
+			 * plus tweaks including deadlock avoidance ...
+			 * also needs to get error handling and probably
+			 * an #ifdef CONFIG_HIBERNATION
+			 */
+			hibernate();
+#endif
+			poll = 1;
+		}
+	}
+
+	/* chgstatus irqs */
+	if (tps->nmask1) {
+		tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS);
+		mask = tmp ^ tps->chgstatus;
+		tps->chgstatus = tmp;
+		mask &= tps->nmask1;
+	} else
+		mask = 0;
+	if (mask) {
+		unsigned	charging = 0;
+
+		show_chgstatus("chg/irq", tmp);
+		if (tmp & (TPS_CHG_USB|TPS_CHG_AC))
+			show_chgconfig(tps->por, "conf", tps->chgconf);
+
+		/* Unless it was turned off or disabled, we charge any
+		 * battery whenever there's power available for it
+		 * and the charger hasn't been disabled.
+		 */
+		if (!(tps->chgstatus & ~(TPS_CHG_USB|TPS_CHG_AC))
+				&& (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
+				&& (tps->chgconf & TPS_CHARGE_ENABLE)
+				) {
+			if (tps->chgstatus & TPS_CHG_USB) {
+				/* VBUS options are readonly until reconnect */
+				if (mask & TPS_CHG_USB)
+					set_bit(FLAG_VBUS_CHANGED, &tps->flags);
+				charging = 1;
+			} else if (tps->chgstatus & TPS_CHG_AC)
+				charging = 1;
+		}
+		if (charging != tps->charging) {
+			tps->charging = charging;
+			pr_info("%s: battery %scharging\n",
+				DRIVER_NAME, charging ? "" :
+				((tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
+					? "NOT " : "dis"));
+		}
+	}
+
+	/* always poll to detect (a) power removal, without tps65013
+	 * NO_CHG IRQ; or (b) restart of charging after stop.
+	 */
+	if ((tps->model != TPS65013 || !tps->charging)
+			&& (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC)))
+		poll = 1;
+	if (poll)
+		(void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
+
+	/* also potentially gpio-in rise or fall */
+}
+
+/* handle IRQs and polling using keventd for now */
+static void tps65010_work(struct work_struct *work)
+{
+	struct tps65010		*tps;
+
+	tps = container_of(work, struct tps65010, work.work);
+	mutex_lock(&tps->lock);
+
+	tps65010_interrupt(tps);
+
+	if (test_and_clear_bit(FLAG_VBUS_CHANGED, &tps->flags)) {
+		int	status;
+		u8	chgconfig, tmp;
+
+		chgconfig = i2c_smbus_read_byte_data(tps->client,
+					TPS_CHGCONFIG);
+		chgconfig &= ~(TPS_VBUS_500MA | TPS_VBUS_CHARGING);
+		if (tps->vbus == 500)
+			chgconfig |= TPS_VBUS_500MA | TPS_VBUS_CHARGING;
+		else if (tps->vbus >= 100)
+			chgconfig |= TPS_VBUS_CHARGING;
+
+		status = i2c_smbus_write_byte_data(tps->client,
+				TPS_CHGCONFIG, chgconfig);
+
+		/* vbus update fails unless VBUS is connected! */
+		tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG);
+		tps->chgconf = tmp;
+		show_chgconfig(tps->por, "update vbus", tmp);
+	}
+
+	if (test_and_clear_bit(FLAG_IRQ_ENABLE, &tps->flags))
+		enable_irq(tps->client->irq);
+
+	mutex_unlock(&tps->lock);
+}
+
+static irqreturn_t tps65010_irq(int irq, void *_tps)
+{
+	struct tps65010		*tps = _tps;
+
+	disable_irq_nosync(irq);
+	set_bit(FLAG_IRQ_ENABLE, &tps->flags);
+	(void) schedule_work(&tps->work.work);
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* offsets 0..3 == GPIO1..GPIO4
+ * offsets 4..5 == LED1/nPG, LED2 (we set one of the non-BLINK modes)
+ * offset 6 == vibrator motor driver
+ */
+static void
+tps65010_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (offset < 4)
+		tps65010_set_gpio_out_value(offset + 1, value);
+	else if (offset < 6)
+		tps65010_set_led(offset - 3, value ? ON : OFF);
+	else
+		tps65010_set_vib(value);
+}
+
+static int
+tps65010_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	/* GPIOs may be input-only */
+	if (offset < 4) {
+		struct tps65010		*tps;
+
+		tps = container_of(chip, struct tps65010, chip);
+		if (!(tps->outmask & (1 << offset)))
+			return -EINVAL;
+		tps65010_set_gpio_out_value(offset + 1, value);
+	} else if (offset < 6)
+		tps65010_set_led(offset - 3, value ? ON : OFF);
+	else
+		tps65010_set_vib(value);
+
+	return 0;
+}
+
+static int tps65010_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	int			value;
+	struct tps65010		*tps;
+
+	tps = container_of(chip, struct tps65010, chip);
+
+	if (offset < 4) {
+		value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
+		if (value < 0)
+			return 0;
+		if (value & (1 << (offset + 4)))	/* output */
+			return !(value & (1 << offset));
+		else					/* input */
+			return (value & (1 << offset));
+	}
+
+	/* REVISIT we *could* report LED1/nPG and LED2 state ... */
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static struct tps65010 *the_tps;
+
+static int __exit tps65010_remove(struct i2c_client *client)
+{
+	struct tps65010		*tps = i2c_get_clientdata(client);
+	struct tps65010_board	*board = client->dev.platform_data;
+
+	if (board && board->teardown) {
+		int status = board->teardown(client, board->context);
+		if (status < 0)
+			dev_dbg(&client->dev, "board %s %s err %d\n",
+				"teardown", client->name, status);
+	}
+	if (client->irq > 0)
+		free_irq(client->irq, tps);
+	cancel_delayed_work(&tps->work);
+	flush_scheduled_work();
+	debugfs_remove(tps->file);
+	kfree(tps);
+	i2c_set_clientdata(client, NULL);
+	the_tps = NULL;
+	return 0;
+}
+
+static int tps65010_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct tps65010		*tps;
+	int			status;
+	struct tps65010_board	*board = client->dev.platform_data;
+
+	if (the_tps) {
+		dev_dbg(&client->dev, "only one tps6501x chip allowed\n");
+		return -ENODEV;
+	}
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EINVAL;
+
+	tps = kzalloc(sizeof *tps, GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	mutex_init(&tps->lock);
+	INIT_DELAYED_WORK(&tps->work, tps65010_work);
+	tps->client = client;
+	tps->model = id->driver_data;
+
+	/* the IRQ is active low, but many gpio lines can't support that
+	 * so this driver uses falling-edge triggers instead.
+	 */
+	if (client->irq > 0) {
+		status = request_irq(client->irq, tps65010_irq,
+			IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_FALLING,
+			DRIVER_NAME, tps);
+		if (status < 0) {
+			dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
+					client->irq, status);
+			goto fail1;
+		}
+		/* annoying race here, ideally we'd have an option
+		 * to claim the irq now and enable it later.
+		 * FIXME genirq IRQF_NOAUTOEN now solves that ...
+		 */
+		disable_irq(client->irq);
+		set_bit(FLAG_IRQ_ENABLE, &tps->flags);
+	} else
+		dev_warn(&client->dev, "IRQ not configured!\n");
+
+
+	switch (tps->model) {
+	case TPS65010:
+	case TPS65012:
+		tps->por = 1;
+		break;
+	/* else CHGCONFIG.POR is replaced by AUA, enabling a WAIT mode */
+	}
+	tps->chgconf = i2c_smbus_read_byte_data(client, TPS_CHGCONFIG);
+	show_chgconfig(tps->por, "conf/init", tps->chgconf);
+
+	show_chgstatus("chg/init",
+		i2c_smbus_read_byte_data(client, TPS_CHGSTATUS));
+	show_regstatus("reg/init",
+		i2c_smbus_read_byte_data(client, TPS_REGSTATUS));
+
+	pr_debug("%s: vdcdc1 0x%02x, vdcdc2 %02x, vregs1 %02x\n", DRIVER_NAME,
+		i2c_smbus_read_byte_data(client, TPS_VDCDC1),
+		i2c_smbus_read_byte_data(client, TPS_VDCDC2),
+		i2c_smbus_read_byte_data(client, TPS_VREGS1));
+	pr_debug("%s: defgpio 0x%02x, mask3 0x%02x\n", DRIVER_NAME,
+		i2c_smbus_read_byte_data(client, TPS_DEFGPIO),
+		i2c_smbus_read_byte_data(client, TPS_MASK3));
+
+	i2c_set_clientdata(client, tps);
+	the_tps = tps;
+
+#if	defined(CONFIG_USB_GADGET) && !defined(CONFIG_USB_OTG)
+	/* USB hosts can't draw VBUS.  OTG devices could, later
+	 * when OTG infrastructure enables it.  USB peripherals
+	 * could be relying on VBUS while booting, though.
+	 */
+	tps->vbus = 100;
+#endif
+
+	/* unmask the "interesting" irqs, then poll once to
+	 * kickstart monitoring, initialize shadowed status
+	 * registers, and maybe disable VBUS draw.
+	 */
+	tps->nmask1 = ~0;
+	(void) i2c_smbus_write_byte_data(client, TPS_MASK1, ~tps->nmask1);
+
+	tps->nmask2 = TPS_REG_ONOFF;
+	if (tps->model == TPS65013)
+		tps->nmask2 |= TPS_REG_NO_CHG;
+	(void) i2c_smbus_write_byte_data(client, TPS_MASK2, ~tps->nmask2);
+
+	(void) i2c_smbus_write_byte_data(client, TPS_MASK3, 0x0f
+		| i2c_smbus_read_byte_data(client, TPS_MASK3));
+
+	tps65010_work(&tps->work.work);
+
+	tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL,
+				tps, DEBUG_FOPS);
+
+	/* optionally register GPIOs */
+	if (board && board->base > 0) {
+		tps->outmask = board->outmask;
+
+		tps->chip.label = client->name;
+		tps->chip.dev = &client->dev;
+		tps->chip.owner = THIS_MODULE;
+
+		tps->chip.set = tps65010_gpio_set;
+		tps->chip.direction_output = tps65010_output;
+
+		/* NOTE:  only partial support for inputs; nyet IRQs */
+		tps->chip.get = tps65010_gpio_get;
+
+		tps->chip.base = board->base;
+		tps->chip.ngpio = 7;
+		tps->chip.can_sleep = 1;
+
+		status = gpiochip_add(&tps->chip);
+		if (status < 0)
+			dev_err(&client->dev, "can't add gpiochip, err %d\n",
+					status);
+		else if (board->setup) {
+			status = board->setup(client, board->context);
+			if (status < 0) {
+				dev_dbg(&client->dev,
+					"board %s %s err %d\n",
+					"setup", client->name, status);
+				status = 0;
+			}
+		}
+	}
+
+	return 0;
+fail1:
+	kfree(tps);
+	return status;
+}
+
+static const struct i2c_device_id tps65010_id[] = {
+	{ "tps65010", TPS65010 },
+	{ "tps65011", TPS65011 },
+	{ "tps65012", TPS65012 },
+	{ "tps65013", TPS65013 },
+	{ "tps65014", TPS65011 },	/* tps65011 charging at 6.5V max */
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tps65010_id);
+
+static struct i2c_driver tps65010_driver = {
+	.driver = {
+		.name	= "tps65010",
+	},
+	.probe	= tps65010_probe,
+	.remove	= __exit_p(tps65010_remove),
+	.id_table = tps65010_id,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Draw from VBUS:
+ *   0 mA -- DON'T DRAW (might supply power instead)
+ * 100 mA -- usb unit load (slowest charge rate)
+ * 500 mA -- usb high power (fast battery charge)
+ */
+int tps65010_set_vbus_draw(unsigned mA)
+{
+	unsigned long	flags;
+
+	if (!the_tps)
+		return -ENODEV;
+
+	/* assumes non-SMP */
+	local_irq_save(flags);
+	if (mA >= 500)
+		mA = 500;
+	else if (mA >= 100)
+		mA = 100;
+	else
+		mA = 0;
+	the_tps->vbus = mA;
+	if ((the_tps->chgstatus & TPS_CHG_USB)
+			&& test_and_set_bit(
+				FLAG_VBUS_CHANGED, &the_tps->flags)) {
+		/* gadget drivers call this in_irq() */
+		(void) schedule_work(&the_tps->work.work);
+	}
+	local_irq_restore(flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(tps65010_set_vbus_draw);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_gpio_out_value parameter:
+ * gpio:  GPIO1, GPIO2, GPIO3 or GPIO4
+ * value: LOW or HIGH
+ */
+int tps65010_set_gpio_out_value(unsigned gpio, unsigned value)
+{
+	int	 status;
+	unsigned defgpio;
+
+	if (!the_tps)
+		return -ENODEV;
+	if ((gpio < GPIO1) || (gpio > GPIO4))
+		return -EINVAL;
+
+	mutex_lock(&the_tps->lock);
+
+	defgpio = i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO);
+
+	/* Configure GPIO for output */
+	defgpio |= 1 << (gpio + 3);
+
+	/* Writing 1 forces a logic 0 on that GPIO and vice versa */
+	switch (value) {
+	case LOW:
+		defgpio |= 1 << (gpio - 1);    /* set GPIO low by writing 1 */
+		break;
+	/* case HIGH: */
+	default:
+		defgpio &= ~(1 << (gpio - 1)); /* set GPIO high by writing 0 */
+		break;
+	}
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+		TPS_DEFGPIO, defgpio);
+
+	pr_debug("%s: gpio%dout = %s, defgpio 0x%02x\n", DRIVER_NAME,
+		gpio, value ? "high" : "low",
+		i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO));
+
+	mutex_unlock(&the_tps->lock);
+	return status;
+}
+EXPORT_SYMBOL(tps65010_set_gpio_out_value);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_led parameter:
+ * led:  LED1 or LED2
+ * mode: ON, OFF or BLINK
+ */
+int tps65010_set_led(unsigned led, unsigned mode)
+{
+	int	 status;
+	unsigned led_on, led_per, offs;
+
+	if (!the_tps)
+		return -ENODEV;
+
+	if (led == LED1)
+		offs = 0;
+	else {
+		offs = 2;
+		led = LED2;
+	}
+
+	mutex_lock(&the_tps->lock);
+
+	pr_debug("%s: led%i_on   0x%02x\n", DRIVER_NAME, led,
+		i2c_smbus_read_byte_data(the_tps->client,
+				TPS_LED1_ON + offs));
+
+	pr_debug("%s: led%i_per  0x%02x\n", DRIVER_NAME, led,
+		i2c_smbus_read_byte_data(the_tps->client,
+				TPS_LED1_PER + offs));
+
+	switch (mode) {
+	case OFF:
+		led_on  = 1 << 7;
+		led_per = 0 << 7;
+		break;
+	case ON:
+		led_on  = 1 << 7;
+		led_per = 1 << 7;
+		break;
+	case BLINK:
+		led_on  = 0x30 | (0 << 7);
+		led_per = 0x08 | (1 << 7);
+		break;
+	default:
+		printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n",
+		       DRIVER_NAME);
+		mutex_unlock(&the_tps->lock);
+		return -EINVAL;
+	}
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+			TPS_LED1_ON + offs, led_on);
+
+	if (status != 0) {
+		printk(KERN_ERR "%s: Failed to write led%i_on register\n",
+		       DRIVER_NAME, led);
+		mutex_unlock(&the_tps->lock);
+		return status;
+	}
+
+	pr_debug("%s: led%i_on   0x%02x\n", DRIVER_NAME, led,
+		i2c_smbus_read_byte_data(the_tps->client, TPS_LED1_ON + offs));
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+			TPS_LED1_PER + offs, led_per);
+
+	if (status != 0) {
+		printk(KERN_ERR "%s: Failed to write led%i_per register\n",
+		       DRIVER_NAME, led);
+		mutex_unlock(&the_tps->lock);
+		return status;
+	}
+
+	pr_debug("%s: led%i_per  0x%02x\n", DRIVER_NAME, led,
+		i2c_smbus_read_byte_data(the_tps->client,
+				TPS_LED1_PER + offs));
+
+	mutex_unlock(&the_tps->lock);
+
+	return status;
+}
+EXPORT_SYMBOL(tps65010_set_led);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_vib parameter:
+ * value: ON or OFF
+ */
+int tps65010_set_vib(unsigned value)
+{
+	int	 status;
+	unsigned vdcdc2;
+
+	if (!the_tps)
+		return -ENODEV;
+
+	mutex_lock(&the_tps->lock);
+
+	vdcdc2 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC2);
+	vdcdc2 &= ~(1 << 1);
+	if (value)
+		vdcdc2 |= (1 << 1);
+	status = i2c_smbus_write_byte_data(the_tps->client,
+		TPS_VDCDC2, vdcdc2);
+
+	pr_debug("%s: vibrator %s\n", DRIVER_NAME, value ? "on" : "off");
+
+	mutex_unlock(&the_tps->lock);
+	return status;
+}
+EXPORT_SYMBOL(tps65010_set_vib);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_low_pwr parameter:
+ * mode: ON or OFF
+ */
+int tps65010_set_low_pwr(unsigned mode)
+{
+	int	 status;
+	unsigned vdcdc1;
+
+	if (!the_tps)
+		return -ENODEV;
+
+	mutex_lock(&the_tps->lock);
+
+	pr_debug("%s: %s low_pwr, vdcdc1 0x%02x\n", DRIVER_NAME,
+		mode ? "enable" : "disable",
+		i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+	vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1);
+
+	switch (mode) {
+	case OFF:
+		vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
+		break;
+	/* case ON: */
+	default:
+		vdcdc1 |= TPS_ENABLE_LP;  /* enable ENABLE_LP bit */
+		break;
+	}
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+			TPS_VDCDC1, vdcdc1);
+
+	if (status != 0)
+		printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
+			DRIVER_NAME);
+	else
+		pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
+			i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+	mutex_unlock(&the_tps->lock);
+
+	return status;
+}
+EXPORT_SYMBOL(tps65010_set_low_pwr);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_config_vregs1 parameter:
+ * value to be written to VREGS1 register
+ * Note: The complete register is written, set all bits you need
+ */
+int tps65010_config_vregs1(unsigned value)
+{
+	int	 status;
+
+	if (!the_tps)
+		return -ENODEV;
+
+	mutex_lock(&the_tps->lock);
+
+	pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
+			i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1));
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+			TPS_VREGS1, value);
+
+	if (status != 0)
+		printk(KERN_ERR "%s: Failed to write vregs1 register\n",
+			DRIVER_NAME);
+	else
+		pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
+			i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1));
+
+	mutex_unlock(&the_tps->lock);
+
+	return status;
+}
+EXPORT_SYMBOL(tps65010_config_vregs1);
+
+/*-------------------------------------------------------------------------*/
+/* tps65013_set_low_pwr parameter:
+ * mode: ON or OFF
+ */
+
+/* FIXME: Assumes AC or USB power is present. Setting AUA bit is not
+	required if power supply is through a battery */
+
+int tps65013_set_low_pwr(unsigned mode)
+{
+	int	 status;
+	unsigned vdcdc1, chgconfig;
+
+	if (!the_tps || the_tps->por)
+		return -ENODEV;
+
+	mutex_lock(&the_tps->lock);
+
+	pr_debug("%s: %s low_pwr, chgconfig 0x%02x vdcdc1 0x%02x\n",
+		DRIVER_NAME,
+		mode ? "enable" : "disable",
+		i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG),
+		i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+	chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG);
+	vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1);
+
+	switch (mode) {
+	case OFF:
+		chgconfig &= ~TPS65013_AUA; /* disable AUA bit */
+		vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
+		break;
+	/* case ON: */
+	default:
+		chgconfig |= TPS65013_AUA;  /* enable AUA bit */
+		vdcdc1 |= TPS_ENABLE_LP;  /* enable ENABLE_LP bit */
+		break;
+	}
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+			TPS_CHGCONFIG, chgconfig);
+	if (status != 0) {
+		printk(KERN_ERR "%s: Failed to write chconfig register\n",
+	 DRIVER_NAME);
+		mutex_unlock(&the_tps->lock);
+		return status;
+	}
+
+	chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG);
+	the_tps->chgconf = chgconfig;
+	show_chgconfig(0, "chgconf", chgconfig);
+
+	status = i2c_smbus_write_byte_data(the_tps->client,
+			TPS_VDCDC1, vdcdc1);
+
+	if (status != 0)
+		printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
+	 DRIVER_NAME);
+	else
+		pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
+			i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+	mutex_unlock(&the_tps->lock);
+
+	return status;
+}
+EXPORT_SYMBOL(tps65013_set_low_pwr);
+
+/*-------------------------------------------------------------------------*/
+
+static int __init tps_init(void)
+{
+	u32	tries = 3;
+	int	status = -ENODEV;
+
+	printk(KERN_INFO "%s: version %s\n", DRIVER_NAME, DRIVER_VERSION);
+
+	/* some boards have startup glitches */
+	while (tries--) {
+		status = i2c_add_driver(&tps65010_driver);
+		if (the_tps)
+			break;
+		i2c_del_driver(&tps65010_driver);
+		if (!tries) {
+			printk(KERN_ERR "%s: no chip?\n", DRIVER_NAME);
+			return -ENODEV;
+		}
+		pr_debug("%s: re-probe ...\n", DRIVER_NAME);
+		msleep(10);
+	}
+
+	return status;
+}
+/* NOTE:  this MUST be initialized before the other parts of the system
+ * that rely on it ... but after the i2c bus on which this relies.
+ * That is, much earlier than on PC-type systems, which don't often use
+ * I2C as a core system bus.
+ */
+subsys_initcall(tps_init);
+
+static void __exit tps_exit(void)
+{
+	i2c_del_driver(&tps65010_driver);
+}
+module_exit(tps_exit);
+
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index dd843c4fbcc..e7ab0035d30 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -33,9 +33,14 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
+#include <linux/regulator/machine.h>
+
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
 
+#ifdef CONFIG_ARM
+#include <mach/cpu.h>
+#endif
 
 /*
  * The TWL4030 "Triton 2" is one of a family of a multi-function "Power
@@ -71,6 +76,13 @@
 #define twl_has_gpio()	false
 #endif
 
+#if defined(CONFIG_REGULATOR_TWL4030) \
+	|| defined(CONFIG_REGULATOR_TWL4030_MODULE)
+#define twl_has_regulator()	true
+#else
+#define twl_has_regulator()	false
+#endif
+
 #if defined(CONFIG_TWL4030_MADC) || defined(CONFIG_TWL4030_MADC_MODULE)
 #define twl_has_madc()	true
 #else
@@ -149,6 +161,10 @@
 #define HIGH_PERF_SQ			(1 << 3)
 
 
+/* chip-specific feature flags, for i2c_device_id.driver_data */
+#define TWL4030_VAUX2		BIT(0)	/* pre-5030 voltage ranges */
+#define TPS_SUBSET		BIT(1)	/* tps659[23]0 have fewer LDOs */
+
 /*----------------------------------------------------------------------*/
 
 /* is driver active, bound to a chip? */
@@ -225,7 +241,7 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
  *
  * Returns the result of operation - 0 is success
  */
-int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes)
+int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 {
 	int ret;
 	int sid;
@@ -274,7 +290,7 @@ EXPORT_SYMBOL(twl4030_i2c_write);
  *
  * Returns result of operation - num_bytes is success else failure.
  */
-int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes)
+int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 {
 	int ret;
 	u8 val;
@@ -352,258 +368,258 @@ EXPORT_SYMBOL(twl4030_i2c_read_u8);
 
 /*----------------------------------------------------------------------*/
 
-/*
- * NOTE:  We know the first 8 IRQs after pdata->base_irq are
- * for the PIH, and the next are for the PWR_INT SIH, since
- * that's how twl_init_irq() sets things up.
- */
-
-static int add_children(struct twl4030_platform_data *pdata)
+static struct device *
+add_numbered_child(unsigned chip, const char *name, int num,
+		void *pdata, unsigned pdata_len,
+		bool can_wakeup, int irq0, int irq1)
 {
-	struct platform_device	*pdev = NULL;
-	struct twl4030_client	*twl = NULL;
-	int			status = 0;
+	struct platform_device	*pdev;
+	struct twl4030_client	*twl = &twl4030_modules[chip];
+	int			status;
+
+	pdev = platform_device_alloc(name, num);
+	if (!pdev) {
+		dev_dbg(&twl->client->dev, "can't alloc dev\n");
+		status = -ENOMEM;
+		goto err;
+	}
 
-	if (twl_has_bci() && pdata->bci) {
-		twl = &twl4030_modules[3];
+	device_init_wakeup(&pdev->dev, can_wakeup);
+	pdev->dev.parent = &twl->client->dev;
 
-		pdev = platform_device_alloc("twl4030_bci", -1);
-		if (!pdev) {
-			pr_debug("%s: can't alloc bci dev\n", DRIVER_NAME);
-			status = -ENOMEM;
+	if (pdata) {
+		status = platform_device_add_data(pdev, pdata, pdata_len);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "can't add platform_data\n");
 			goto err;
 		}
+	}
 
-		if (status == 0) {
-			pdev->dev.parent = &twl->client->dev;
-			status = platform_device_add_data(pdev, pdata->bci,
-					sizeof(*pdata->bci));
-			if (status < 0) {
-				dev_dbg(&twl->client->dev,
-					"can't add bci data, %d\n",
-					status);
-				goto err;
-			}
-		}
-
-		if (status == 0) {
-			struct resource r = {
-				.start = pdata->irq_base + 8 + 1,
-				.flags = IORESOURCE_IRQ,
-			};
-
-			status = platform_device_add_resources(pdev, &r, 1);
-		}
-
-		if (status == 0)
-			status = platform_device_add(pdev);
+	if (irq0) {
+		struct resource r[2] = {
+			{ .start = irq0, .flags = IORESOURCE_IRQ, },
+			{ .start = irq1, .flags = IORESOURCE_IRQ, },
+		};
 
+		status = platform_device_add_resources(pdev, r, irq1 ? 2 : 1);
 		if (status < 0) {
-			platform_device_put(pdev);
-			dev_dbg(&twl->client->dev,
-					"can't create bci dev, %d\n",
-					status);
+			dev_dbg(&pdev->dev, "can't add irqs\n");
 			goto err;
 		}
 	}
 
-	if (twl_has_gpio() && pdata->gpio) {
-		twl = &twl4030_modules[1];
+	status = platform_device_add(pdev);
 
-		pdev = platform_device_alloc("twl4030_gpio", -1);
-		if (!pdev) {
-			pr_debug("%s: can't alloc gpio dev\n", DRIVER_NAME);
-			status = -ENOMEM;
-			goto err;
-		}
+err:
+	if (status < 0) {
+		platform_device_put(pdev);
+		dev_err(&twl->client->dev, "can't add %s dev\n", name);
+		return ERR_PTR(status);
+	}
+	return &pdev->dev;
+}
 
-		/* more driver model init */
-		if (status == 0) {
-			pdev->dev.parent = &twl->client->dev;
-			/* device_init_wakeup(&pdev->dev, 1); */
-
-			status = platform_device_add_data(pdev, pdata->gpio,
-					sizeof(*pdata->gpio));
-			if (status < 0) {
-				dev_dbg(&twl->client->dev,
-					"can't add gpio data, %d\n",
-					status);
-				goto err;
-			}
-		}
+static inline struct device *add_child(unsigned chip, const char *name,
+		void *pdata, unsigned pdata_len,
+		bool can_wakeup, int irq0, int irq1)
+{
+	return add_numbered_child(chip, name, -1, pdata, pdata_len,
+		can_wakeup, irq0, irq1);
+}
 
-		/* GPIO module IRQ */
-		if (status == 0) {
-			struct resource	r = {
-				.start = pdata->irq_base + 0,
-				.flags = IORESOURCE_IRQ,
-			};
+static struct device *
+add_regulator_linked(int num, struct regulator_init_data *pdata,
+		struct regulator_consumer_supply *consumers,
+		unsigned num_consumers)
+{
+	/* regulator framework demands init_data ... */
+	if (!pdata)
+		return NULL;
 
-			status = platform_device_add_resources(pdev, &r, 1);
-		}
+	if (consumers) {
+		pdata->consumer_supplies = consumers;
+		pdata->num_consumer_supplies = num_consumers;
+	}
 
-		if (status == 0)
-			status = platform_device_add(pdev);
+	/* NOTE:  we currently ignore regulator IRQs, e.g. for short circuits */
+	return add_numbered_child(3, "twl4030_reg", num,
+		pdata, sizeof(*pdata), false, 0, 0);
+}
 
-		if (status < 0) {
-			platform_device_put(pdev);
-			dev_dbg(&twl->client->dev,
-					"can't create gpio dev, %d\n",
-					status);
-			goto err;
-		}
+static struct device *
+add_regulator(int num, struct regulator_init_data *pdata)
+{
+	return add_regulator_linked(num, pdata, NULL, 0);
+}
+
+/*
+ * NOTE:  We know the first 8 IRQs after pdata->base_irq are
+ * for the PIH, and the next are for the PWR_INT SIH, since
+ * that's how twl_init_irq() sets things up.
+ */
+
+static int
+add_children(struct twl4030_platform_data *pdata, unsigned long features)
+{
+	struct device	*child;
+	struct device	*usb_transceiver = NULL;
+
+	if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) {
+		child = add_child(3, "twl4030_bci",
+				pdata->bci, sizeof(*pdata->bci),
+				false,
+				/* irq0 = CHG_PRES, irq1 = BCI */
+				pdata->irq_base + 8 + 1, pdata->irq_base + 2);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
+	if (twl_has_gpio() && pdata->gpio) {
+		child = add_child(1, "twl4030_gpio",
+				pdata->gpio, sizeof(*pdata->gpio),
+				false, pdata->irq_base + 0, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
 	}
 
 	if (twl_has_keypad() && pdata->keypad) {
-		pdev = platform_device_alloc("twl4030_keypad", -1);
-		if (pdev) {
-			twl = &twl4030_modules[2];
-			pdev->dev.parent = &twl->client->dev;
-			device_init_wakeup(&pdev->dev, 1);
-			status = platform_device_add_data(pdev, pdata->keypad,
-					sizeof(*pdata->keypad));
-			if (status < 0) {
-				dev_dbg(&twl->client->dev,
-					"can't add keypad data, %d\n",
-					status);
-				platform_device_put(pdev);
-				goto err;
-			}
-			status = platform_device_add(pdev);
-			if (status < 0) {
-				platform_device_put(pdev);
-				dev_dbg(&twl->client->dev,
-						"can't create keypad dev, %d\n",
-						status);
-				goto err;
-			}
-		} else {
-			pr_debug("%s: can't alloc keypad dev\n", DRIVER_NAME);
-			status = -ENOMEM;
-			goto err;
-		}
+		child = add_child(2, "twl4030_keypad",
+				pdata->keypad, sizeof(*pdata->keypad),
+				true, pdata->irq_base + 1, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
 	}
 
 	if (twl_has_madc() && pdata->madc) {
-		pdev = platform_device_alloc("twl4030_madc", -1);
-		if (pdev) {
-			twl = &twl4030_modules[2];
-			pdev->dev.parent = &twl->client->dev;
-			device_init_wakeup(&pdev->dev, 1);
-			status = platform_device_add_data(pdev, pdata->madc,
-					sizeof(*pdata->madc));
-			if (status < 0) {
-				platform_device_put(pdev);
-				dev_dbg(&twl->client->dev,
-					"can't add madc data, %d\n",
-					status);
-				goto err;
-			}
-			status = platform_device_add(pdev);
-			if (status < 0) {
-				platform_device_put(pdev);
-				dev_dbg(&twl->client->dev,
-						"can't create madc dev, %d\n",
-						status);
-				goto err;
-			}
-		} else {
-			pr_debug("%s: can't alloc madc dev\n", DRIVER_NAME);
-			status = -ENOMEM;
-			goto err;
-		}
+		child = add_child(2, "twl4030_madc",
+				pdata->madc, sizeof(*pdata->madc),
+				true, pdata->irq_base + 3, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
 	}
 
 	if (twl_has_rtc()) {
-		twl = &twl4030_modules[3];
-
-		pdev = platform_device_alloc("twl4030_rtc", -1);
-		if (!pdev) {
-			pr_debug("%s: can't alloc rtc dev\n", DRIVER_NAME);
-			status = -ENOMEM;
-		} else {
-			pdev->dev.parent = &twl->client->dev;
-			device_init_wakeup(&pdev->dev, 1);
-		}
-
 		/*
-		 * REVISIT platform_data here currently might use of
+		 * REVISIT platform_data here currently might expose the
 		 * "msecure" line ... but for now we just expect board
-		 * setup to tell the chip "we are secure" at all times.
+		 * setup to tell the chip "it's always ok to SET_TIME".
 		 * Eventually, Linux might become more aware of such
 		 * HW security concerns, and "least privilege".
 		 */
-
-		/* RTC module IRQ */
-		if (status == 0) {
-			struct resource	r = {
-				.start = pdata->irq_base + 8 + 3,
-				.flags = IORESOURCE_IRQ,
-			};
-
-			status = platform_device_add_resources(pdev, &r, 1);
-		}
-
-		if (status == 0)
-			status = platform_device_add(pdev);
-
-		if (status < 0) {
-			platform_device_put(pdev);
-			dev_dbg(&twl->client->dev,
-					"can't create rtc dev, %d\n",
-					status);
-			goto err;
-		}
+		child = add_child(3, "twl4030_rtc",
+				NULL, 0,
+				true, pdata->irq_base + 8 + 3, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
 	}
 
 	if (twl_has_usb() && pdata->usb) {
-		twl = &twl4030_modules[0];
-
-		pdev = platform_device_alloc("twl4030_usb", -1);
-		if (!pdev) {
-			pr_debug("%s: can't alloc usb dev\n", DRIVER_NAME);
-			status = -ENOMEM;
-			goto err;
-		}
-
-		if (status == 0) {
-			pdev->dev.parent = &twl->client->dev;
-			device_init_wakeup(&pdev->dev, 1);
-			status = platform_device_add_data(pdev, pdata->usb,
-					sizeof(*pdata->usb));
-			if (status < 0) {
-				platform_device_put(pdev);
-				dev_dbg(&twl->client->dev,
-					"can't add usb data, %d\n",
-					status);
-				goto err;
-			}
-		}
-
-		if (status == 0) {
-			struct resource r = {
-				.start = pdata->irq_base + 8 + 2,
-				.flags = IORESOURCE_IRQ,
-			};
+		child = add_child(0, "twl4030_usb",
+				pdata->usb, sizeof(*pdata->usb),
+				true,
+				/* irq0 = USB_PRES, irq1 = USB */
+				pdata->irq_base + 8 + 2, pdata->irq_base + 4);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		/* we need to connect regulators to this transceiver */
+		usb_transceiver = child;
+	}
 
-			status = platform_device_add_resources(pdev, &r, 1);
-		}
+	if (twl_has_regulator()) {
+		/*
+		child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+		*/
+
+		child = add_regulator(TWL4030_REG_VMMC1, pdata->vmmc1);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL4030_REG_VDAC, pdata->vdac);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator((features & TWL4030_VAUX2)
+					? TWL4030_REG_VAUX2_4030
+					: TWL4030_REG_VAUX2,
+				pdata->vaux2);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
 
-		if (status == 0)
-			status = platform_device_add(pdev);
+	if (twl_has_regulator() && usb_transceiver) {
+		static struct regulator_consumer_supply usb1v5 = {
+			.supply =	"usb1v5",
+		};
+		static struct regulator_consumer_supply usb1v8 = {
+			.supply =	"usb1v8",
+		};
+		static struct regulator_consumer_supply usb3v1 = {
+			.supply =	"usb3v1",
+		};
+
+		/* this is a template that gets copied */
+		struct regulator_init_data usb_fixed = {
+			.constraints.valid_modes_mask =
+				  REGULATOR_MODE_NORMAL
+				| REGULATOR_MODE_STANDBY,
+			.constraints.valid_ops_mask =
+				  REGULATOR_CHANGE_MODE
+				| REGULATOR_CHANGE_STATUS,
+		};
+
+		usb1v5.dev = usb_transceiver;
+		usb1v8.dev = usb_transceiver;
+		usb3v1.dev = usb_transceiver;
+
+		child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed,
+				&usb1v5, 1);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator_linked(TWL4030_REG_VUSB1V8, &usb_fixed,
+				&usb1v8, 1);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator_linked(TWL4030_REG_VUSB3V1, &usb_fixed,
+				&usb3v1, 1);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
 
-		if (status < 0) {
-			platform_device_put(pdev);
-			dev_dbg(&twl->client->dev,
-					"can't create usb dev, %d\n",
-					status);
-		}
+	/* maybe add LDOs that are omitted on cost-reduced parts */
+	if (twl_has_regulator() && !(features & TPS_SUBSET)) {
+		/*
+		child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+		*/
+
+		child = add_regulator(TWL4030_REG_VMMC2, pdata->vmmc2);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL4030_REG_VSIM, pdata->vsim);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL4030_REG_VAUX1, pdata->vaux1);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL4030_REG_VAUX3, pdata->vaux3);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL4030_REG_VAUX4, pdata->vaux4);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
 	}
 
-err:
-	if (status)
-		pr_err("failed to add twl4030's children (status %d)\n", status);
-	return status;
+	return 0;
 }
 
 /*----------------------------------------------------------------------*/
@@ -633,7 +649,7 @@ static inline int __init unprotect_pm_master(void)
 	return e;
 }
 
-static void __init clocks_init(void)
+static void __init clocks_init(struct device *dev)
 {
 	int e = 0;
 	struct clk *osc;
@@ -642,15 +658,10 @@ static void __init clocks_init(void)
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	if (cpu_is_omap2430())
-		osc = clk_get(NULL, "osc_ck");
+		osc = clk_get(dev, "osc_ck");
 	else
-		osc = clk_get(NULL, "osc_sys_ck");
-#else
-	/* REVISIT for non-OMAP systems, pass the clock rate from
-	 * board init code, using platform_data.
-	 */
-	osc = ERR_PTR(-EIO);
-#endif
+		osc = clk_get(dev, "osc_sys_ck");
+
 	if (IS_ERR(osc)) {
 		printk(KERN_WARNING "Skipping twl4030 internal clock init and "
 				"using bootloader value (unknown osc rate)\n");
@@ -660,6 +671,18 @@ static void __init clocks_init(void)
 	rate = clk_get_rate(osc);
 	clk_put(osc);
 
+#else
+	/* REVISIT for non-OMAP systems, pass the clock rate from
+	 * board init code, using platform_data.
+	 */
+	osc = ERR_PTR(-EIO);
+
+	printk(KERN_WARNING "Skipping twl4030 internal clock init and "
+	       "using bootloader value (unknown osc rate)\n");
+
+	return;
+#endif
+
 	switch (rate) {
 	case 19200000:
 		ctrl = HFCLK_FREQ_19p2_MHZ;
@@ -753,7 +776,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	inuse = true;
 
 	/* setup clock framework */
-	clocks_init();
+	clocks_init(&client->dev);
 
 	/* Maybe init the T2 Interrupt subsystem */
 	if (client->irq
@@ -764,7 +787,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
 			goto fail;
 	}
 
-	status = add_children(pdata);
+	status = add_children(pdata, id->driver_data);
 fail:
 	if (status < 0)
 		twl4030_remove(client);
@@ -772,11 +795,11 @@ fail:
 }
 
 static const struct i2c_device_id twl4030_ids[] = {
-	{ "twl4030", 0 },	/* "Triton 2" */
-	{ "tps65950", 0 },	/* catalog version of twl4030 */
-	{ "tps65930", 0 },	/* fewer LDOs and DACs; no charger */
-	{ "tps65920", 0 },	/* fewer LDOs; no codec or charger */
-	{ "twl5030", 0 },	/* T2 updated */
+	{ "twl4030", TWL4030_VAUX2 },	/* "Triton 2" */
+	{ "twl5030", 0 },		/* T2 updated */
+	{ "tps65950", 0 },		/* catalog version of twl5030 */
+	{ "tps65930", TPS_SUBSET },	/* fewer LDOs and DACs; no charger */
+	{ "tps65920", TPS_SUBSET },	/* fewer LDOs; no codec or charger */
 	{ /* end of list */ },
 };
 MODULE_DEVICE_TABLE(i2c, twl4030_ids);
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index fae868a8d49..b1087603698 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -180,10 +180,15 @@ static struct completion irq_event;
 static int twl4030_irq_thread(void *data)
 {
 	long irq = (long)data;
-	irq_desc_t *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_to_desc(irq);
 	static unsigned i2c_errors;
 	const static unsigned max_i2c_errors = 100;
 
+	if (!desc) {
+		pr_err("twl4030: Invalid IRQ: %ld\n", irq);
+		return -EINVAL;
+	}
+
 	current->flags |= PF_NOFREEZE;
 
 	while (!kthread_should_stop()) {
@@ -215,7 +220,13 @@ static int twl4030_irq_thread(void *data)
 				pih_isr;
 				pih_isr >>= 1, module_irq++) {
 			if (pih_isr & 0x1) {
-				irq_desc_t *d = irq_desc + module_irq;
+				struct irq_desc *d = irq_to_desc(module_irq);
+
+				if (!d) {
+					pr_err("twl4030: Invalid SIH IRQ: %d\n",
+					       module_irq);
+					return -EINVAL;
+				}
 
 				/* These can't be masked ... always warn
 				 * if we get any surprises.
@@ -452,10 +463,16 @@ static void twl4030_sih_do_edge(struct work_struct *work)
 	/* Modify only the bits we know must change */
 	while (edge_change) {
 		int		i = fls(edge_change) - 1;
-		struct irq_desc	*d = irq_desc + i + agent->irq_base;
+		struct irq_desc	*d = irq_to_desc(i + agent->irq_base);
 		int		byte = 1 + (i >> 2);
 		int		off = (i & 0x3) * 2;
 
+		if (!d) {
+			pr_err("twl4030: Invalid IRQ: %d\n",
+			       i + agent->irq_base);
+			return;
+		}
+
 		bytes[byte] &= ~(0x03 << off);
 
 		spin_lock_irq(&d->lock);
@@ -512,9 +529,14 @@ static void twl4030_sih_unmask(unsigned irq)
 static int twl4030_sih_set_type(unsigned irq, unsigned trigger)
 {
 	struct sih_agent *sih = get_irq_chip_data(irq);
-	struct irq_desc *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_to_desc(irq);
 	unsigned long flags;
 
+	if (!desc) {
+		pr_err("twl4030: Invalid IRQ: %d\n", irq);
+		return -EINVAL;
+	}
+
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
 		return -EINVAL;
 
diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c
index 61aeaf79640..86fed4870f9 100644
--- a/drivers/mfd/ucb1x00-assabet.c
+++ b/drivers/mfd/ucb1x00-assabet.c
@@ -15,7 +15,7 @@
 #include <linux/proc_fs.h>
 #include <linux/device.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 
 #include "ucb1x00.h"
 
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index a316f1b7593..6860c924f36 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -25,7 +25,7 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 #include <mach/hardware.h>
 
 #include "ucb1x00.h"
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 44762ca86a8..61b7d3eb9a2 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -31,7 +31,7 @@
 #include <linux/slab.h>
 #include <linux/kthread.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 #include <mach/collie.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 0d47fb9e4b3..f92595c8f16 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -63,7 +63,6 @@
  */
 static DEFINE_MUTEX(io_mutex);
 static DEFINE_MUTEX(reg_lock_mutex);
-static DEFINE_MUTEX(auxadc_mutex);
 
 /* Perform a physical read from the device.
  */
@@ -299,6 +298,13 @@ int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs,
 }
 EXPORT_SYMBOL_GPL(wm8350_block_write);
 
+/**
+ * wm8350_reg_lock()
+ *
+ * The WM8350 has a hardware lock which can be used to prevent writes to
+ * some registers (generally those which can cause particularly serious
+ * problems if misused).  This function enables that lock.
+ */
 int wm8350_reg_lock(struct wm8350 *wm8350)
 {
 	u16 key = WM8350_LOCK_KEY;
@@ -314,6 +320,15 @@ int wm8350_reg_lock(struct wm8350 *wm8350)
 }
 EXPORT_SYMBOL_GPL(wm8350_reg_lock);
 
+/**
+ * wm8350_reg_unlock()
+ *
+ * The WM8350 has a hardware lock which can be used to prevent writes to
+ * some registers (generally those which can cause particularly serious
+ * problems if misused).  This function disables that lock so updates
+ * can be performed.  For maximum safety this should be done only when
+ * required.
+ */
 int wm8350_reg_unlock(struct wm8350 *wm8350)
 {
 	u16 key = WM8350_UNLOCK_KEY;
@@ -1066,38 +1081,158 @@ int wm8350_unmask_irq(struct wm8350 *wm8350, int irq)
 }
 EXPORT_SYMBOL_GPL(wm8350_unmask_irq);
 
+int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
+{
+	u16 reg, result = 0;
+	int tries = 5;
+
+	if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP)
+		return -EINVAL;
+	if (channel >= WM8350_AUXADC_USB && channel <= WM8350_AUXADC_TEMP
+	    && (scale != 0 || vref != 0))
+		return -EINVAL;
+
+	mutex_lock(&wm8350->auxadc_mutex);
+
+	/* Turn on the ADC */
+	reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
+	wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, reg | WM8350_AUXADC_ENA);
+
+	if (scale || vref) {
+		reg = scale << 13;
+		reg |= vref << 12;
+		wm8350_reg_write(wm8350, WM8350_AUX1_READBACK + channel, reg);
+	}
+
+	reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
+	reg |= 1 << channel | WM8350_AUXADC_POLL;
+	wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg);
+
+	do {
+		schedule_timeout_interruptible(1);
+		reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
+	} while (tries-- && (reg & WM8350_AUXADC_POLL));
+
+	if (!tries)
+		dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
+	else
+		result = wm8350_reg_read(wm8350,
+					 WM8350_AUX1_READBACK + channel);
+
+	/* Turn off the ADC */
+	reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
+	wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5,
+			 reg & ~WM8350_AUXADC_ENA);
+
+	mutex_unlock(&wm8350->auxadc_mutex);
+
+	return result & WM8350_AUXADC_DATA1_MASK;
+}
+EXPORT_SYMBOL_GPL(wm8350_read_auxadc);
+
 /*
  * Cache is always host endian.
  */
-static int wm8350_create_cache(struct wm8350 *wm8350, int mode)
+static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
 {
 	int i, ret = 0;
 	u16 value;
 	const u16 *reg_map;
 
-	switch (mode) {
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
+	switch (type) {
 	case 0:
-		reg_map = wm8350_mode0_defaults;
-		break;
+		switch (mode) {
+#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
+		case 0:
+			reg_map = wm8350_mode0_defaults;
+			break;
 #endif
 #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1
-	case 1:
-		reg_map = wm8350_mode1_defaults;
-		break;
+		case 1:
+			reg_map = wm8350_mode1_defaults;
+			break;
 #endif
 #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2
-	case 2:
-		reg_map = wm8350_mode2_defaults;
-		break;
+		case 2:
+			reg_map = wm8350_mode2_defaults;
+			break;
 #endif
 #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3
-	case 3:
-		reg_map = wm8350_mode3_defaults;
+		case 3:
+			reg_map = wm8350_mode3_defaults;
+			break;
+#endif
+		default:
+			dev_err(wm8350->dev,
+				"WM8350 configuration mode %d not supported\n",
+				mode);
+			return -EINVAL;
+		}
 		break;
+
+	case 1:
+		switch (mode) {
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0
+		case 0:
+			reg_map = wm8351_mode0_defaults;
+			break;
+#endif
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1
+		case 1:
+			reg_map = wm8351_mode1_defaults;
+			break;
+#endif
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2
+		case 2:
+			reg_map = wm8351_mode2_defaults;
+			break;
 #endif
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3
+		case 3:
+			reg_map = wm8351_mode3_defaults;
+			break;
+#endif
+		default:
+			dev_err(wm8350->dev,
+				"WM8351 configuration mode %d not supported\n",
+				mode);
+			return -EINVAL;
+		}
+		break;
+
+	case 2:
+		switch (mode) {
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
+		case 0:
+			reg_map = wm8352_mode0_defaults;
+			break;
+#endif
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
+		case 1:
+			reg_map = wm8352_mode1_defaults;
+			break;
+#endif
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
+		case 2:
+			reg_map = wm8352_mode2_defaults;
+			break;
+#endif
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
+		case 3:
+			reg_map = wm8352_mode3_defaults;
+			break;
+#endif
+		default:
+			dev_err(wm8350->dev,
+				"WM8352 configuration mode %d not supported\n",
+				mode);
+			return -EINVAL;
+		}
+		break;
+
 	default:
-		dev_err(wm8350->dev, "Configuration mode %d not supported\n",
+		dev_err(wm8350->dev,
+			"WM835x configuration mode %d not supported\n",
 			mode);
 		return -EINVAL;
 	}
@@ -1163,53 +1298,113 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 		       struct wm8350_platform_data *pdata)
 {
 	int ret = -EINVAL;
-	u16 id1, id2, mask, mode;
+	u16 id1, id2, mask_rev;
+	u16 cust_id, mode, chip_rev;
 
 	/* get WM8350 revision and config mode */
 	wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
 	wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
+	wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), &mask_rev);
 
 	id1 = be16_to_cpu(id1);
 	id2 = be16_to_cpu(id2);
+	mask_rev = be16_to_cpu(mask_rev);
 
-	if (id1 == 0x6143) {
-		switch ((id2 & WM8350_CHIP_REV_MASK) >> 12) {
+	if (id1 != 0x6143) {
+		dev_err(wm8350->dev,
+			"Device with ID %x is not a WM8350\n", id1);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	mode = id2 & WM8350_CONF_STS_MASK >> 10;
+	cust_id = id2 & WM8350_CUST_ID_MASK;
+	chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12;
+	dev_info(wm8350->dev,
+		 "CONF_STS %d, CUST_ID %d, MASK_REV %d, CHIP_REV %d\n",
+		 mode, cust_id, mask_rev, chip_rev);
+
+	if (cust_id != 0) {
+		dev_err(wm8350->dev, "Unsupported CUST_ID\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	switch (mask_rev) {
+	case 0:
+		wm8350->pmic.max_dcdc = WM8350_DCDC_6;
+		wm8350->pmic.max_isink = WM8350_ISINK_B;
+
+		switch (chip_rev) {
 		case WM8350_REV_E:
-			dev_info(wm8350->dev, "Found Rev E device\n");
-			wm8350->rev = WM8350_REV_E;
+			dev_info(wm8350->dev, "WM8350 Rev E\n");
 			break;
 		case WM8350_REV_F:
-			dev_info(wm8350->dev, "Found Rev F device\n");
-			wm8350->rev = WM8350_REV_F;
+			dev_info(wm8350->dev, "WM8350 Rev F\n");
 			break;
 		case WM8350_REV_G:
-			dev_info(wm8350->dev, "Found Rev G device\n");
-			wm8350->rev = WM8350_REV_G;
+			dev_info(wm8350->dev, "WM8350 Rev G\n");
+			wm8350->power.rev_g_coeff = 1;
+			break;
+		case WM8350_REV_H:
+			dev_info(wm8350->dev, "WM8350 Rev H\n");
+			wm8350->power.rev_g_coeff = 1;
 			break;
 		default:
 			/* For safety we refuse to run on unknown hardware */
-			dev_info(wm8350->dev, "Found unknown rev\n");
+			dev_err(wm8350->dev, "Unknown WM8350 CHIP_REV\n");
 			ret = -ENODEV;
 			goto err;
 		}
-	} else {
-		dev_info(wm8350->dev, "Device with ID %x is not a WM8350\n",
-			 id1);
+		break;
+
+	case 1:
+		wm8350->pmic.max_dcdc = WM8350_DCDC_4;
+		wm8350->pmic.max_isink = WM8350_ISINK_A;
+
+		switch (chip_rev) {
+		case 0:
+			dev_info(wm8350->dev, "WM8351 Rev A\n");
+			wm8350->power.rev_g_coeff = 1;
+			break;
+
+		default:
+			dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
+			ret = -ENODEV;
+			goto err;
+		}
+		break;
+
+	case 2:
+		wm8350->pmic.max_dcdc = WM8350_DCDC_6;
+		wm8350->pmic.max_isink = WM8350_ISINK_B;
+
+		switch (chip_rev) {
+		case 0:
+			dev_info(wm8350->dev, "WM8352 Rev A\n");
+			wm8350->power.rev_g_coeff = 1;
+			break;
+
+		default:
+			dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n");
+			ret = -ENODEV;
+			goto err;
+		}
+		break;
+
+	default:
+		dev_err(wm8350->dev, "Unknown MASK_REV\n");
 		ret = -ENODEV;
 		goto err;
 	}
 
-	mode = id2 & WM8350_CONF_STS_MASK >> 10;
-	mask = id2 & WM8350_CUST_ID_MASK;
-	dev_info(wm8350->dev, "Config mode %d, ROM mask %d\n", mode, mask);
-
-	ret = wm8350_create_cache(wm8350, mode);
+	ret = wm8350_create_cache(wm8350, mask_rev, mode);
 	if (ret < 0) {
-		printk(KERN_ERR "wm8350: failed to create register cache\n");
+		dev_err(wm8350->dev, "Failed to create register cache\n");
 		return ret;
 	}
 
-	if (pdata->init) {
+	if (pdata && pdata->init) {
 		ret = pdata->init(wm8350);
 		if (ret != 0) {
 			dev_err(wm8350->dev, "Platform init() failed: %d\n",
@@ -1218,6 +1413,7 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 		}
 	}
 
+	mutex_init(&wm8350->auxadc_mutex);
 	mutex_init(&wm8350->irq_mutex);
 	INIT_WORK(&wm8350->irq_work, wm8350_irq_worker);
 	if (irq) {
@@ -1257,6 +1453,9 @@ void wm8350_device_exit(struct wm8350 *wm8350)
 {
 	int i;
 
+	for (i = 0; i < ARRAY_SIZE(wm8350->pmic.led); i++)
+		platform_device_unregister(wm8350->pmic.led[i].pdev);
+
 	for (i = 0; i < ARRAY_SIZE(wm8350->pmic.pdev); i++)
 		platform_device_unregister(wm8350->pmic.pdev[i]);
 
diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c
index 8dfe21bb3bd..8d8c9321757 100644
--- a/drivers/mfd/wm8350-i2c.c
+++ b/drivers/mfd/wm8350-i2c.c
@@ -1,8 +1,6 @@
 /*
  * wm8350-i2c.c  --  Generic I2C driver for Wolfson WM8350 PMIC
  *
- * This driver defines and configures the WM8350 for the Freescale i.MX32ADS.
- *
  * Copyright 2007, 2008 Wolfson Microelectronics PLC.
  *
  * Author: Liam Girdwood
@@ -30,7 +28,12 @@ static int wm8350_i2c_read_device(struct wm8350 *wm8350, char reg,
 	ret = i2c_master_send(wm8350->i2c_client, &reg, 1);
 	if (ret < 0)
 		return ret;
-	return i2c_master_recv(wm8350->i2c_client, dest, bytes);
+	ret = i2c_master_recv(wm8350->i2c_client, dest, bytes);
+	if (ret < 0)
+		return ret;
+	if (ret != bytes)
+		return -EIO;
+	return 0;
 }
 
 static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg,
@@ -38,13 +41,19 @@ static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg,
 {
 	/* we add 1 byte for device register */
 	u8 msg[(WM8350_MAX_REGISTER << 1) + 1];
+	int ret;
 
 	if (bytes > ((WM8350_MAX_REGISTER << 1) + 1))
 		return -EINVAL;
 
 	msg[0] = reg;
 	memcpy(&msg[1], src, bytes);
-	return i2c_master_send(wm8350->i2c_client, msg, bytes + 1);
+	ret = i2c_master_send(wm8350->i2c_client, msg, bytes + 1);
+	if (ret < 0)
+		return ret;
+	if (ret != bytes + 1)
+		return -EIO;
+	return 0;
 }
 
 static int wm8350_i2c_probe(struct i2c_client *i2c,
@@ -88,6 +97,8 @@ static int wm8350_i2c_remove(struct i2c_client *i2c)
 
 static const struct i2c_device_id wm8350_i2c_id[] = {
        { "wm8350", 0 },
+       { "wm8351", 0 },
+       { "wm8352", 0 },
        { }
 };
 MODULE_DEVICE_TABLE(i2c, wm8350_i2c_id);
diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c
index 974678db22c..68887b817d1 100644
--- a/drivers/mfd/wm8350-regmap.c
+++ b/drivers/mfd/wm8350-regmap.c
@@ -1074,6 +1074,2102 @@ const u16 wm8350_mode3_defaults[] = {
 };
 #endif
 
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8351_mode0_defaults[] = {
+	0x6143,     /* R0   - Reset/ID */
+	0x0000,     /* R1   - ID */
+	0x0001,     /* R2   - Revision */
+	0x1C02,     /* R3   - System Control 1 */
+	0x0004,     /* R4   - System Control 2 */
+	0x0000,     /* R5   - System Hibernate */
+	0x8A00,     /* R6   - Interface Control */
+	0x0000,     /* R7 */
+	0x8000,     /* R8   - Power mgmt (1) */
+	0x0000,     /* R9   - Power mgmt (2) */
+	0x0000,     /* R10  - Power mgmt (3) */
+	0x2000,     /* R11  - Power mgmt (4) */
+	0x0E00,     /* R12  - Power mgmt (5) */
+	0x0000,     /* R13  - Power mgmt (6) */
+	0x0000,     /* R14  - Power mgmt (7) */
+	0x0000,     /* R15 */
+	0x0000,     /* R16  - RTC Seconds/Minutes */
+	0x0100,     /* R17  - RTC Hours/Day */
+	0x0101,     /* R18  - RTC Date/Month */
+	0x1400,     /* R19  - RTC Year */
+	0x0000,     /* R20  - Alarm Seconds/Minutes */
+	0x0000,     /* R21  - Alarm Hours/Day */
+	0x0000,     /* R22  - Alarm Date/Month */
+	0x0320,     /* R23  - RTC Time Control */
+	0x0000,     /* R24  - System Interrupts */
+	0x0000,     /* R25  - Interrupt Status 1 */
+	0x0000,     /* R26  - Interrupt Status 2 */
+	0x0000,     /* R27 */
+	0x0000,     /* R28  - Under Voltage Interrupt status */
+	0x0000,     /* R29  - Over Current Interrupt status */
+	0x0000,     /* R30  - GPIO Interrupt Status */
+	0x0000,     /* R31  - Comparator Interrupt Status */
+	0x3FFF,     /* R32  - System Interrupts Mask */
+	0x0000,     /* R33  - Interrupt Status 1 Mask */
+	0x0000,     /* R34  - Interrupt Status 2 Mask */
+	0x0000,     /* R35 */
+	0x0000,     /* R36  - Under Voltage Interrupt status Mask */
+	0x0000,     /* R37  - Over Current Interrupt status Mask */
+	0x0000,     /* R38  - GPIO Interrupt Status Mask */
+	0x0000,     /* R39  - Comparator Interrupt Status Mask */
+	0x0040,     /* R40  - Clock Control 1 */
+	0x0000,     /* R41  - Clock Control 2 */
+	0x3A00,     /* R42  - FLL Control 1 */
+	0x7086,     /* R43  - FLL Control 2 */
+	0xC226,     /* R44  - FLL Control 3 */
+	0x0000,     /* R45  - FLL Control 4 */
+	0x0000,     /* R46 */
+	0x0000,     /* R47 */
+	0x0000,     /* R48  - DAC Control */
+	0x0000,     /* R49 */
+	0x00C0,     /* R50  - DAC Digital Volume L */
+	0x00C0,     /* R51  - DAC Digital Volume R */
+	0x0000,     /* R52 */
+	0x0040,     /* R53  - DAC LR Rate */
+	0x0000,     /* R54  - DAC Clock Control */
+	0x0000,     /* R55 */
+	0x0000,     /* R56 */
+	0x0000,     /* R57 */
+	0x4000,     /* R58  - DAC Mute */
+	0x0000,     /* R59  - DAC Mute Volume */
+	0x0000,     /* R60  - DAC Side */
+	0x0000,     /* R61 */
+	0x0000,     /* R62 */
+	0x0000,     /* R63 */
+	0x8000,     /* R64  - ADC Control */
+	0x0000,     /* R65 */
+	0x00C0,     /* R66  - ADC Digital Volume L */
+	0x00C0,     /* R67  - ADC Digital Volume R */
+	0x0000,     /* R68  - ADC Divider */
+	0x0000,     /* R69 */
+	0x0040,     /* R70  - ADC LR Rate */
+	0x0000,     /* R71 */
+	0x0303,     /* R72  - Input Control */
+	0x0000,     /* R73  - IN3 Input Control */
+	0x0000,     /* R74  - Mic Bias Control */
+	0x0000,     /* R75 */
+	0x0000,     /* R76  - Output Control */
+	0x0000,     /* R77  - Jack Detect */
+	0x0000,     /* R78  - Anti Pop Control */
+	0x0000,     /* R79 */
+	0x0040,     /* R80  - Left Input Volume */
+	0x0040,     /* R81  - Right Input Volume */
+	0x0000,     /* R82 */
+	0x0000,     /* R83 */
+	0x0000,     /* R84 */
+	0x0000,     /* R85 */
+	0x0000,     /* R86 */
+	0x0000,     /* R87 */
+	0x0800,     /* R88  - Left Mixer Control */
+	0x1000,     /* R89  - Right Mixer Control */
+	0x0000,     /* R90 */
+	0x0000,     /* R91 */
+	0x0000,     /* R92  - OUT3 Mixer Control */
+	0x0000,     /* R93  - OUT4 Mixer Control */
+	0x0000,     /* R94 */
+	0x0000,     /* R95 */
+	0x0000,     /* R96  - Output Left Mixer Volume */
+	0x0000,     /* R97  - Output Right Mixer Volume */
+	0x0000,     /* R98  - Input Mixer Volume L */
+	0x0000,     /* R99  - Input Mixer Volume R */
+	0x0000,     /* R100 - Input Mixer Volume */
+	0x0000,     /* R101 */
+	0x0000,     /* R102 */
+	0x0000,     /* R103 */
+	0x00E4,     /* R104 - OUT1L Volume */
+	0x00E4,     /* R105 - OUT1R Volume */
+	0x00E4,     /* R106 - OUT2L Volume */
+	0x02E4,     /* R107 - OUT2R Volume */
+	0x0000,     /* R108 */
+	0x0000,     /* R109 */
+	0x0000,     /* R110 */
+	0x0000,     /* R111 - BEEP Volume */
+	0x0A00,     /* R112 - AI Formating */
+	0x0000,     /* R113 - ADC DAC COMP */
+	0x0020,     /* R114 - AI ADC Control */
+	0x0020,     /* R115 - AI DAC Control */
+	0x0000,     /* R116 */
+	0x0000,     /* R117 */
+	0x0000,     /* R118 */
+	0x0000,     /* R119 */
+	0x0000,     /* R120 */
+	0x0000,     /* R121 */
+	0x0000,     /* R122 */
+	0x0000,     /* R123 */
+	0x0000,     /* R124 */
+	0x0000,     /* R125 */
+	0x0000,     /* R126 */
+	0x0000,     /* R127 */
+	0x1FFF,     /* R128 - GPIO Debounce */
+	0x0000,     /* R129 - GPIO Pin pull up Control */
+	0x0000,     /* R130 - GPIO Pull down Control */
+	0x0000,     /* R131 - GPIO Interrupt Mode */
+	0x0000,     /* R132 */
+	0x0000,     /* R133 - GPIO Control */
+	0x0FFC,     /* R134 - GPIO Configuration (i/o) */
+	0x0FFC,     /* R135 - GPIO Pin Polarity / Type */
+	0x0000,     /* R136 */
+	0x0000,     /* R137 */
+	0x0000,     /* R138 */
+	0x0000,     /* R139 */
+	0x0013,     /* R140 - GPIO Function Select 1 */
+	0x0000,     /* R141 - GPIO Function Select 2 */
+	0x0000,     /* R142 - GPIO Function Select 3 */
+	0x0003,     /* R143 - GPIO Function Select 4 */
+	0x0000,     /* R144 - Digitiser Control (1) */
+	0x0002,     /* R145 - Digitiser Control (2) */
+	0x0000,     /* R146 */
+	0x0000,     /* R147 */
+	0x0000,     /* R148 */
+	0x0000,     /* R149 */
+	0x0000,     /* R150 */
+	0x0000,     /* R151 */
+	0x7000,     /* R152 - AUX1 Readback */
+	0x7000,     /* R153 - AUX2 Readback */
+	0x7000,     /* R154 - AUX3 Readback */
+	0x7000,     /* R155 - AUX4 Readback */
+	0x0000,     /* R156 - USB Voltage Readback */
+	0x0000,     /* R157 - LINE Voltage Readback */
+	0x0000,     /* R158 - BATT Voltage Readback */
+	0x0000,     /* R159 - Chip Temp Readback */
+	0x0000,     /* R160 */
+	0x0000,     /* R161 */
+	0x0000,     /* R162 */
+	0x0000,     /* R163 - Generic Comparator Control */
+	0x0000,     /* R164 - Generic comparator 1 */
+	0x0000,     /* R165 - Generic comparator 2 */
+	0x0000,     /* R166 - Generic comparator 3 */
+	0x0000,     /* R167 - Generic comparator 4 */
+	0xA00F,     /* R168 - Battery Charger Control 1 */
+	0x0B06,     /* R169 - Battery Charger Control 2 */
+	0x0000,     /* R170 - Battery Charger Control 3 */
+	0x0000,     /* R171 */
+	0x0000,     /* R172 - Current Sink Driver A */
+	0x0000,     /* R173 - CSA Flash control */
+	0x0000,     /* R174 */
+	0x0000,     /* R175 */
+	0x0000,     /* R176 - DCDC/LDO requested */
+	0x032D,     /* R177 - DCDC Active options */
+	0x0000,     /* R178 - DCDC Sleep options */
+	0x0025,     /* R179 - Power-check comparator */
+	0x000E,     /* R180 - DCDC1 Control */
+	0x0000,     /* R181 - DCDC1 Timeouts */
+	0x1006,     /* R182 - DCDC1 Low Power */
+	0x0018,     /* R183 - DCDC2 Control */
+	0x0000,     /* R184 - DCDC2 Timeouts */
+	0x0000,     /* R185 */
+	0x0000,     /* R186 - DCDC3 Control */
+	0x0000,     /* R187 - DCDC3 Timeouts */
+	0x0006,     /* R188 - DCDC3 Low Power */
+	0x0000,     /* R189 - DCDC4 Control */
+	0x0000,     /* R190 - DCDC4 Timeouts */
+	0x0006,     /* R191 - DCDC4 Low Power */
+	0x0008,     /* R192 */
+	0x0000,     /* R193 */
+	0x0000,     /* R194 */
+	0x0000,     /* R195 */
+	0x0000,     /* R196 */
+	0x0006,     /* R197 */
+	0x0000,     /* R198 */
+	0x0003,     /* R199 - Limit Switch Control */
+	0x001C,     /* R200 - LDO1 Control */
+	0x0000,     /* R201 - LDO1 Timeouts */
+	0x001C,     /* R202 - LDO1 Low Power */
+	0x001B,     /* R203 - LDO2 Control */
+	0x0000,     /* R204 - LDO2 Timeouts */
+	0x001C,     /* R205 - LDO2 Low Power */
+	0x001B,     /* R206 - LDO3 Control */
+	0x0000,     /* R207 - LDO3 Timeouts */
+	0x001C,     /* R208 - LDO3 Low Power */
+	0x001B,     /* R209 - LDO4 Control */
+	0x0000,     /* R210 - LDO4 Timeouts */
+	0x001C,     /* R211 - LDO4 Low Power */
+	0x0000,     /* R212 */
+	0x0000,     /* R213 */
+	0x0000,     /* R214 */
+	0x0000,     /* R215 - VCC_FAULT Masks */
+	0x001F,     /* R216 - Main Bandgap Control */
+	0x0000,     /* R217 - OSC Control */
+	0x9000,     /* R218 - RTC Tick Control */
+	0x0000,     /* R219 - Security1 */
+	0x4000,     /* R220 */
+	0x0000,     /* R221 */
+	0x0000,     /* R222 */
+	0x0000,     /* R223 */
+	0x0000,     /* R224 - Signal overrides */
+	0x0000,     /* R225 - DCDC/LDO status */
+	0x0000,     /* R226 - Charger Overides/status */
+	0x0000,     /* R227 - misc overrides */
+	0x0000,     /* R228 - Supply overrides/status 1 */
+	0x0000,     /* R229 - Supply overrides/status 2 */
+	0xE000,     /* R230 - GPIO Pin Status */
+	0x0000,     /* R231 - comparotor overrides */
+	0x0000,     /* R232 */
+	0x0000,     /* R233 - State Machine status */
+	0x1200,     /* R234 - FLL Test 1 */
+	0x0000,     /* R235 */
+	0x8000,     /* R236 */
+	0x0000,     /* R237 */
+	0x0000,     /* R238 */
+	0x0000,     /* R239 */
+	0x0003,     /* R240 */
+	0x0000,     /* R241 */
+	0x0000,     /* R242 */
+	0x0004,     /* R243 */
+	0x0300,     /* R244 */
+	0x0000,     /* R245 */
+	0x0200,     /* R246 */
+	0x0000,     /* R247 */
+	0x1000,     /* R248 - DCDC1 Test Controls */
+	0x1000,     /* R249 */
+	0x1000,     /* R250 - DCDC3 Test Controls */
+	0x1000,     /* R251 - DCDC4 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8351_mode1_defaults[] = {
+	0x6143,     /* R0   - Reset/ID */
+	0x0000,     /* R1   - ID */
+	0x0001,     /* R2   - Revision */
+	0x1C02,     /* R3   - System Control 1 */
+	0x0204,     /* R4   - System Control 2 */
+	0x0000,     /* R5   - System Hibernate */
+	0x8A00,     /* R6   - Interface Control */
+	0x0000,     /* R7 */
+	0x8000,     /* R8   - Power mgmt (1) */
+	0x0000,     /* R9   - Power mgmt (2) */
+	0x0000,     /* R10  - Power mgmt (3) */
+	0x2000,     /* R11  - Power mgmt (4) */
+	0x0E00,     /* R12  - Power mgmt (5) */
+	0x0000,     /* R13  - Power mgmt (6) */
+	0x0000,     /* R14  - Power mgmt (7) */
+	0x0000,     /* R15 */
+	0x0000,     /* R16  - RTC Seconds/Minutes */
+	0x0100,     /* R17  - RTC Hours/Day */
+	0x0101,     /* R18  - RTC Date/Month */
+	0x1400,     /* R19  - RTC Year */
+	0x0000,     /* R20  - Alarm Seconds/Minutes */
+	0x0000,     /* R21  - Alarm Hours/Day */
+	0x0000,     /* R22  - Alarm Date/Month */
+	0x0320,     /* R23  - RTC Time Control */
+	0x0000,     /* R24  - System Interrupts */
+	0x0000,     /* R25  - Interrupt Status 1 */
+	0x0000,     /* R26  - Interrupt Status 2 */
+	0x0000,     /* R27 */
+	0x0000,     /* R28  - Under Voltage Interrupt status */
+	0x0000,     /* R29  - Over Current Interrupt status */
+	0x0000,     /* R30  - GPIO Interrupt Status */
+	0x0000,     /* R31  - Comparator Interrupt Status */
+	0x3FFF,     /* R32  - System Interrupts Mask */
+	0x0000,     /* R33  - Interrupt Status 1 Mask */
+	0x0000,     /* R34  - Interrupt Status 2 Mask */
+	0x0000,     /* R35 */
+	0x0000,     /* R36  - Under Voltage Interrupt status Mask */
+	0x0000,     /* R37  - Over Current Interrupt status Mask */
+	0x0000,     /* R38  - GPIO Interrupt Status Mask */
+	0x0000,     /* R39  - Comparator Interrupt Status Mask */
+	0x0040,     /* R40  - Clock Control 1 */
+	0x0000,     /* R41  - Clock Control 2 */
+	0x3A00,     /* R42  - FLL Control 1 */
+	0x7086,     /* R43  - FLL Control 2 */
+	0xC226,     /* R44  - FLL Control 3 */
+	0x0000,     /* R45  - FLL Control 4 */
+	0x0000,     /* R46 */
+	0x0000,     /* R47 */
+	0x0000,     /* R48  - DAC Control */
+	0x0000,     /* R49 */
+	0x00C0,     /* R50  - DAC Digital Volume L */
+	0x00C0,     /* R51  - DAC Digital Volume R */
+	0x0000,     /* R52 */
+	0x0040,     /* R53  - DAC LR Rate */
+	0x0000,     /* R54  - DAC Clock Control */
+	0x0000,     /* R55 */
+	0x0000,     /* R56 */
+	0x0000,     /* R57 */
+	0x4000,     /* R58  - DAC Mute */
+	0x0000,     /* R59  - DAC Mute Volume */
+	0x0000,     /* R60  - DAC Side */
+	0x0000,     /* R61 */
+	0x0000,     /* R62 */
+	0x0000,     /* R63 */
+	0x8000,     /* R64  - ADC Control */
+	0x0000,     /* R65 */
+	0x00C0,     /* R66  - ADC Digital Volume L */
+	0x00C0,     /* R67  - ADC Digital Volume R */
+	0x0000,     /* R68  - ADC Divider */
+	0x0000,     /* R69 */
+	0x0040,     /* R70  - ADC LR Rate */
+	0x0000,     /* R71 */
+	0x0303,     /* R72  - Input Control */
+	0x0000,     /* R73  - IN3 Input Control */
+	0x0000,     /* R74  - Mic Bias Control */
+	0x0000,     /* R75 */
+	0x0000,     /* R76  - Output Control */
+	0x0000,     /* R77  - Jack Detect */
+	0x0000,     /* R78  - Anti Pop Control */
+	0x0000,     /* R79 */
+	0x0040,     /* R80  - Left Input Volume */
+	0x0040,     /* R81  - Right Input Volume */
+	0x0000,     /* R82 */
+	0x0000,     /* R83 */
+	0x0000,     /* R84 */
+	0x0000,     /* R85 */
+	0x0000,     /* R86 */
+	0x0000,     /* R87 */
+	0x0800,     /* R88  - Left Mixer Control */
+	0x1000,     /* R89  - Right Mixer Control */
+	0x0000,     /* R90 */
+	0x0000,     /* R91 */
+	0x0000,     /* R92  - OUT3 Mixer Control */
+	0x0000,     /* R93  - OUT4 Mixer Control */
+	0x0000,     /* R94 */
+	0x0000,     /* R95 */
+	0x0000,     /* R96  - Output Left Mixer Volume */
+	0x0000,     /* R97  - Output Right Mixer Volume */
+	0x0000,     /* R98  - Input Mixer Volume L */
+	0x0000,     /* R99  - Input Mixer Volume R */
+	0x0000,     /* R100 - Input Mixer Volume */
+	0x0000,     /* R101 */
+	0x0000,     /* R102 */
+	0x0000,     /* R103 */
+	0x00E4,     /* R104 - OUT1L Volume */
+	0x00E4,     /* R105 - OUT1R Volume */
+	0x00E4,     /* R106 - OUT2L Volume */
+	0x02E4,     /* R107 - OUT2R Volume */
+	0x0000,     /* R108 */
+	0x0000,     /* R109 */
+	0x0000,     /* R110 */
+	0x0000,     /* R111 - BEEP Volume */
+	0x0A00,     /* R112 - AI Formating */
+	0x0000,     /* R113 - ADC DAC COMP */
+	0x0020,     /* R114 - AI ADC Control */
+	0x0020,     /* R115 - AI DAC Control */
+	0x0000,     /* R116 */
+	0x0000,     /* R117 */
+	0x0000,     /* R118 */
+	0x0000,     /* R119 */
+	0x0000,     /* R120 */
+	0x0000,     /* R121 */
+	0x0000,     /* R122 */
+	0x0000,     /* R123 */
+	0x0000,     /* R124 */
+	0x0000,     /* R125 */
+	0x0000,     /* R126 */
+	0x0000,     /* R127 */
+	0x1FFF,     /* R128 - GPIO Debounce */
+	0x0000,     /* R129 - GPIO Pin pull up Control */
+	0x0000,     /* R130 - GPIO Pull down Control */
+	0x0000,     /* R131 - GPIO Interrupt Mode */
+	0x0000,     /* R132 */
+	0x0000,     /* R133 - GPIO Control */
+	0x0CFB,     /* R134 - GPIO Configuration (i/o) */
+	0x0C1F,     /* R135 - GPIO Pin Polarity / Type */
+	0x0000,     /* R136 */
+	0x0000,     /* R137 */
+	0x0000,     /* R138 */
+	0x0000,     /* R139 */
+	0x0300,     /* R140 - GPIO Function Select 1 */
+	0x1110,     /* R141 - GPIO Function Select 2 */
+	0x0013,     /* R142 - GPIO Function Select 3 */
+	0x0003,     /* R143 - GPIO Function Select 4 */
+	0x0000,     /* R144 - Digitiser Control (1) */
+	0x0002,     /* R145 - Digitiser Control (2) */
+	0x0000,     /* R146 */
+	0x0000,     /* R147 */
+	0x0000,     /* R148 */
+	0x0000,     /* R149 */
+	0x0000,     /* R150 */
+	0x0000,     /* R151 */
+	0x7000,     /* R152 - AUX1 Readback */
+	0x7000,     /* R153 - AUX2 Readback */
+	0x7000,     /* R154 - AUX3 Readback */
+	0x7000,     /* R155 - AUX4 Readback */
+	0x0000,     /* R156 - USB Voltage Readback */
+	0x0000,     /* R157 - LINE Voltage Readback */
+	0x0000,     /* R158 - BATT Voltage Readback */
+	0x0000,     /* R159 - Chip Temp Readback */
+	0x0000,     /* R160 */
+	0x0000,     /* R161 */
+	0x0000,     /* R162 */
+	0x0000,     /* R163 - Generic Comparator Control */
+	0x0000,     /* R164 - Generic comparator 1 */
+	0x0000,     /* R165 - Generic comparator 2 */
+	0x0000,     /* R166 - Generic comparator 3 */
+	0x0000,     /* R167 - Generic comparator 4 */
+	0xA00F,     /* R168 - Battery Charger Control 1 */
+	0x0B06,     /* R169 - Battery Charger Control 2 */
+	0x0000,     /* R170 - Battery Charger Control 3 */
+	0x0000,     /* R171 */
+	0x0000,     /* R172 - Current Sink Driver A */
+	0x0000,     /* R173 - CSA Flash control */
+	0x0000,     /* R174 */
+	0x0000,     /* R175 */
+	0x0000,     /* R176 - DCDC/LDO requested */
+	0x032D,     /* R177 - DCDC Active options */
+	0x0000,     /* R178 - DCDC Sleep options */
+	0x0025,     /* R179 - Power-check comparator */
+	0x000E,     /* R180 - DCDC1 Control */
+	0x0C00,     /* R181 - DCDC1 Timeouts */
+	0x1006,     /* R182 - DCDC1 Low Power */
+	0x0018,     /* R183 - DCDC2 Control */
+	0x0000,     /* R184 - DCDC2 Timeouts */
+	0x0000,     /* R185 */
+	0x0026,     /* R186 - DCDC3 Control */
+	0x0400,     /* R187 - DCDC3 Timeouts */
+	0x0006,     /* R188 - DCDC3 Low Power */
+	0x0062,     /* R189 - DCDC4 Control */
+	0x0800,     /* R190 - DCDC4 Timeouts */
+	0x0006,     /* R191 - DCDC4 Low Power */
+	0x0008,     /* R192 */
+	0x0000,     /* R193 */
+	0x0000,     /* R194 */
+	0x000A,     /* R195 */
+	0x1000,     /* R196 */
+	0x0006,     /* R197 */
+	0x0000,     /* R198 */
+	0x0003,     /* R199 - Limit Switch Control */
+	0x0006,     /* R200 - LDO1 Control */
+	0x0000,     /* R201 - LDO1 Timeouts */
+	0x001C,     /* R202 - LDO1 Low Power */
+	0x0010,     /* R203 - LDO2 Control */
+	0x0C00,     /* R204 - LDO2 Timeouts */
+	0x001C,     /* R205 - LDO2 Low Power */
+	0x001F,     /* R206 - LDO3 Control */
+	0x0800,     /* R207 - LDO3 Timeouts */
+	0x001C,     /* R208 - LDO3 Low Power */
+	0x000A,     /* R209 - LDO4 Control */
+	0x0800,     /* R210 - LDO4 Timeouts */
+	0x001C,     /* R211 - LDO4 Low Power */
+	0x0000,     /* R212 */
+	0x0000,     /* R213 */
+	0x0000,     /* R214 */
+	0x0000,     /* R215 - VCC_FAULT Masks */
+	0x001F,     /* R216 - Main Bandgap Control */
+	0x0000,     /* R217 - OSC Control */
+	0x9000,     /* R218 - RTC Tick Control */
+	0x0000,     /* R219 - Security1 */
+	0x4000,     /* R220 */
+	0x0000,     /* R221 */
+	0x0000,     /* R222 */
+	0x0000,     /* R223 */
+	0x0000,     /* R224 - Signal overrides */
+	0x0000,     /* R225 - DCDC/LDO status */
+	0x0000,     /* R226 - Charger Overides/status */
+	0x0000,     /* R227 - misc overrides */
+	0x0000,     /* R228 - Supply overrides/status 1 */
+	0x0000,     /* R229 - Supply overrides/status 2 */
+	0xE000,     /* R230 - GPIO Pin Status */
+	0x0000,     /* R231 - comparotor overrides */
+	0x0000,     /* R232 */
+	0x0000,     /* R233 - State Machine status */
+	0x1200,     /* R234 - FLL Test 1 */
+	0x0000,     /* R235 */
+	0x8000,     /* R236 */
+	0x0000,     /* R237 */
+	0x0000,     /* R238 */
+	0x0000,     /* R239 */
+	0x0003,     /* R240 */
+	0x0000,     /* R241 */
+	0x0000,     /* R242 */
+	0x0004,     /* R243 */
+	0x0300,     /* R244 */
+	0x0000,     /* R245 */
+	0x0200,     /* R246 */
+	0x1000,     /* R247 */
+	0x1000,     /* R248 - DCDC1 Test Controls */
+	0x1000,     /* R249 */
+	0x1000,     /* R250 - DCDC3 Test Controls */
+	0x1000,     /* R251 - DCDC4 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8351_mode2_defaults[] = {
+	0x6143,     /* R0   - Reset/ID */
+	0x0000,     /* R1   - ID */
+	0x0001,     /* R2   - Revision */
+	0x1C02,     /* R3   - System Control 1 */
+	0x0214,     /* R4   - System Control 2 */
+	0x0000,     /* R5   - System Hibernate */
+	0x8A00,     /* R6   - Interface Control */
+	0x0000,     /* R7 */
+	0x8000,     /* R8   - Power mgmt (1) */
+	0x0000,     /* R9   - Power mgmt (2) */
+	0x0000,     /* R10  - Power mgmt (3) */
+	0x2000,     /* R11  - Power mgmt (4) */
+	0x0E00,     /* R12  - Power mgmt (5) */
+	0x0000,     /* R13  - Power mgmt (6) */
+	0x0000,     /* R14  - Power mgmt (7) */
+	0x0000,     /* R15 */
+	0x0000,     /* R16  - RTC Seconds/Minutes */
+	0x0100,     /* R17  - RTC Hours/Day */
+	0x0101,     /* R18  - RTC Date/Month */
+	0x1400,     /* R19  - RTC Year */
+	0x0000,     /* R20  - Alarm Seconds/Minutes */
+	0x0000,     /* R21  - Alarm Hours/Day */
+	0x0000,     /* R22  - Alarm Date/Month */
+	0x0320,     /* R23  - RTC Time Control */
+	0x0000,     /* R24  - System Interrupts */
+	0x0000,     /* R25  - Interrupt Status 1 */
+	0x0000,     /* R26  - Interrupt Status 2 */
+	0x0000,     /* R27 */
+	0x0000,     /* R28  - Under Voltage Interrupt status */
+	0x0000,     /* R29  - Over Current Interrupt status */
+	0x0000,     /* R30  - GPIO Interrupt Status */
+	0x0000,     /* R31  - Comparator Interrupt Status */
+	0x3FFF,     /* R32  - System Interrupts Mask */
+	0x0000,     /* R33  - Interrupt Status 1 Mask */
+	0x0000,     /* R34  - Interrupt Status 2 Mask */
+	0x0000,     /* R35 */
+	0x0000,     /* R36  - Under Voltage Interrupt status Mask */
+	0x0000,     /* R37  - Over Current Interrupt status Mask */
+	0x0000,     /* R38  - GPIO Interrupt Status Mask */
+	0x0000,     /* R39  - Comparator Interrupt Status Mask */
+	0x0040,     /* R40  - Clock Control 1 */
+	0x0000,     /* R41  - Clock Control 2 */
+	0x3A00,     /* R42  - FLL Control 1 */
+	0x7086,     /* R43  - FLL Control 2 */
+	0xC226,     /* R44  - FLL Control 3 */
+	0x0000,     /* R45  - FLL Control 4 */
+	0x0000,     /* R46 */
+	0x0000,     /* R47 */
+	0x0000,     /* R48  - DAC Control */
+	0x0000,     /* R49 */
+	0x00C0,     /* R50  - DAC Digital Volume L */
+	0x00C0,     /* R51  - DAC Digital Volume R */
+	0x0000,     /* R52 */
+	0x0040,     /* R53  - DAC LR Rate */
+	0x0000,     /* R54  - DAC Clock Control */
+	0x0000,     /* R55 */
+	0x0000,     /* R56 */
+	0x0000,     /* R57 */
+	0x4000,     /* R58  - DAC Mute */
+	0x0000,     /* R59  - DAC Mute Volume */
+	0x0000,     /* R60  - DAC Side */
+	0x0000,     /* R61 */
+	0x0000,     /* R62 */
+	0x0000,     /* R63 */
+	0x8000,     /* R64  - ADC Control */
+	0x0000,     /* R65 */
+	0x00C0,     /* R66  - ADC Digital Volume L */
+	0x00C0,     /* R67  - ADC Digital Volume R */
+	0x0000,     /* R68  - ADC Divider */
+	0x0000,     /* R69 */
+	0x0040,     /* R70  - ADC LR Rate */
+	0x0000,     /* R71 */
+	0x0303,     /* R72  - Input Control */
+	0x0000,     /* R73  - IN3 Input Control */
+	0x0000,     /* R74  - Mic Bias Control */
+	0x0000,     /* R75 */
+	0x0000,     /* R76  - Output Control */
+	0x0000,     /* R77  - Jack Detect */
+	0x0000,     /* R78  - Anti Pop Control */
+	0x0000,     /* R79 */
+	0x0040,     /* R80  - Left Input Volume */
+	0x0040,     /* R81  - Right Input Volume */
+	0x0000,     /* R82 */
+	0x0000,     /* R83 */
+	0x0000,     /* R84 */
+	0x0000,     /* R85 */
+	0x0000,     /* R86 */
+	0x0000,     /* R87 */
+	0x0800,     /* R88  - Left Mixer Control */
+	0x1000,     /* R89  - Right Mixer Control */
+	0x0000,     /* R90 */
+	0x0000,     /* R91 */
+	0x0000,     /* R92  - OUT3 Mixer Control */
+	0x0000,     /* R93  - OUT4 Mixer Control */
+	0x0000,     /* R94 */
+	0x0000,     /* R95 */
+	0x0000,     /* R96  - Output Left Mixer Volume */
+	0x0000,     /* R97  - Output Right Mixer Volume */
+	0x0000,     /* R98  - Input Mixer Volume L */
+	0x0000,     /* R99  - Input Mixer Volume R */
+	0x0000,     /* R100 - Input Mixer Volume */
+	0x0000,     /* R101 */
+	0x0000,     /* R102 */
+	0x0000,     /* R103 */
+	0x00E4,     /* R104 - OUT1L Volume */
+	0x00E4,     /* R105 - OUT1R Volume */
+	0x00E4,     /* R106 - OUT2L Volume */
+	0x02E4,     /* R107 - OUT2R Volume */
+	0x0000,     /* R108 */
+	0x0000,     /* R109 */
+	0x0000,     /* R110 */
+	0x0000,     /* R111 - BEEP Volume */
+	0x0A00,     /* R112 - AI Formating */
+	0x0000,     /* R113 - ADC DAC COMP */
+	0x0020,     /* R114 - AI ADC Control */
+	0x0020,     /* R115 - AI DAC Control */
+	0x0000,     /* R116 */
+	0x0000,     /* R117 */
+	0x0000,     /* R118 */
+	0x0000,     /* R119 */
+	0x0000,     /* R120 */
+	0x0000,     /* R121 */
+	0x0000,     /* R122 */
+	0x0000,     /* R123 */
+	0x0000,     /* R124 */
+	0x0000,     /* R125 */
+	0x0000,     /* R126 */
+	0x0000,     /* R127 */
+	0x1FFF,     /* R128 - GPIO Debounce */
+	0x0000,     /* R129 - GPIO Pin pull up Control */
+	0x0110,     /* R130 - GPIO Pull down Control */
+	0x0000,     /* R131 - GPIO Interrupt Mode */
+	0x0000,     /* R132 */
+	0x0000,     /* R133 - GPIO Control */
+	0x09FA,     /* R134 - GPIO Configuration (i/o) */
+	0x0DF6,     /* R135 - GPIO Pin Polarity / Type */
+	0x0000,     /* R136 */
+	0x0000,     /* R137 */
+	0x0000,     /* R138 */
+	0x0000,     /* R139 */
+	0x1310,     /* R140 - GPIO Function Select 1 */
+	0x0003,     /* R141 - GPIO Function Select 2 */
+	0x2000,     /* R142 - GPIO Function Select 3 */
+	0x0000,     /* R143 - GPIO Function Select 4 */
+	0x0000,     /* R144 - Digitiser Control (1) */
+	0x0002,     /* R145 - Digitiser Control (2) */
+	0x0000,     /* R146 */
+	0x0000,     /* R147 */
+	0x0000,     /* R148 */
+	0x0000,     /* R149 */
+	0x0000,     /* R150 */
+	0x0000,     /* R151 */
+	0x7000,     /* R152 - AUX1 Readback */
+	0x7000,     /* R153 - AUX2 Readback */
+	0x7000,     /* R154 - AUX3 Readback */
+	0x7000,     /* R155 - AUX4 Readback */
+	0x0000,     /* R156 - USB Voltage Readback */
+	0x0000,     /* R157 - LINE Voltage Readback */
+	0x0000,     /* R158 - BATT Voltage Readback */
+	0x0000,     /* R159 - Chip Temp Readback */
+	0x0000,     /* R160 */
+	0x0000,     /* R161 */
+	0x0000,     /* R162 */
+	0x0000,     /* R163 - Generic Comparator Control */
+	0x0000,     /* R164 - Generic comparator 1 */
+	0x0000,     /* R165 - Generic comparator 2 */
+	0x0000,     /* R166 - Generic comparator 3 */
+	0x0000,     /* R167 - Generic comparator 4 */
+	0xA00F,     /* R168 - Battery Charger Control 1 */
+	0x0B06,     /* R169 - Battery Charger Control 2 */
+	0x0000,     /* R170 - Battery Charger Control 3 */
+	0x0000,     /* R171 */
+	0x0000,     /* R172 - Current Sink Driver A */
+	0x0000,     /* R173 - CSA Flash control */
+	0x0000,     /* R174 */
+	0x0000,     /* R175 */
+	0x0000,     /* R176 - DCDC/LDO requested */
+	0x032D,     /* R177 - DCDC Active options */
+	0x0000,     /* R178 - DCDC Sleep options */
+	0x0025,     /* R179 - Power-check comparator */
+	0x001A,     /* R180 - DCDC1 Control */
+	0x0800,     /* R181 - DCDC1 Timeouts */
+	0x1006,     /* R182 - DCDC1 Low Power */
+	0x0018,     /* R183 - DCDC2 Control */
+	0x0000,     /* R184 - DCDC2 Timeouts */
+	0x0000,     /* R185 */
+	0x0056,     /* R186 - DCDC3 Control */
+	0x0400,     /* R187 - DCDC3 Timeouts */
+	0x0006,     /* R188 - DCDC3 Low Power */
+	0x0026,     /* R189 - DCDC4 Control */
+	0x0C00,     /* R190 - DCDC4 Timeouts */
+	0x0006,     /* R191 - DCDC4 Low Power */
+	0x0008,     /* R192 */
+	0x0000,     /* R193 */
+	0x0000,     /* R194 */
+	0x0026,     /* R195 */
+	0x0C00,     /* R196 */
+	0x0006,     /* R197 */
+	0x0000,     /* R198 */
+	0x0003,     /* R199 - Limit Switch Control */
+	0x001C,     /* R200 - LDO1 Control */
+	0x0400,     /* R201 - LDO1 Timeouts */
+	0x001C,     /* R202 - LDO1 Low Power */
+	0x0010,     /* R203 - LDO2 Control */
+	0x0C00,     /* R204 - LDO2 Timeouts */
+	0x001C,     /* R205 - LDO2 Low Power */
+	0x0015,     /* R206 - LDO3 Control */
+	0x0000,     /* R207 - LDO3 Timeouts */
+	0x001C,     /* R208 - LDO3 Low Power */
+	0x001A,     /* R209 - LDO4 Control */
+	0x0000,     /* R210 - LDO4 Timeouts */
+	0x001C,     /* R211 - LDO4 Low Power */
+	0x0000,     /* R212 */
+	0x0000,     /* R213 */
+	0x0000,     /* R214 */
+	0x0000,     /* R215 - VCC_FAULT Masks */
+	0x001F,     /* R216 - Main Bandgap Control */
+	0x0000,     /* R217 - OSC Control */
+	0x9000,     /* R218 - RTC Tick Control */
+	0x0000,     /* R219 - Security1 */
+	0x4000,     /* R220 */
+	0x0000,     /* R221 */
+	0x0000,     /* R222 */
+	0x0000,     /* R223 */
+	0x0000,     /* R224 - Signal overrides */
+	0x0000,     /* R225 - DCDC/LDO status */
+	0x0000,     /* R226 - Charger Overides/status */
+	0x0000,     /* R227 - misc overrides */
+	0x0000,     /* R228 - Supply overrides/status 1 */
+	0x0000,     /* R229 - Supply overrides/status 2 */
+	0xE000,     /* R230 - GPIO Pin Status */
+	0x0000,     /* R231 - comparotor overrides */
+	0x0000,     /* R232 */
+	0x0000,     /* R233 - State Machine status */
+	0x1200,     /* R234 - FLL Test 1 */
+	0x0000,     /* R235 */
+	0x8000,     /* R236 */
+	0x0000,     /* R237 */
+	0x0000,     /* R238 */
+	0x0000,     /* R239 */
+	0x0003,     /* R240 */
+	0x0000,     /* R241 */
+	0x0000,     /* R242 */
+	0x0004,     /* R243 */
+	0x0300,     /* R244 */
+	0x0000,     /* R245 */
+	0x0200,     /* R246 */
+	0x0000,     /* R247 */
+	0x1000,     /* R248 - DCDC1 Test Controls */
+	0x1000,     /* R249 */
+	0x1000,     /* R250 - DCDC3 Test Controls */
+	0x1000,     /* R251 - DCDC4 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8351_mode3_defaults[] = {
+	0x6143,     /* R0   - Reset/ID */
+	0x0000,     /* R1   - ID */
+	0x0001,     /* R2   - Revision */
+	0x1C02,     /* R3   - System Control 1 */
+	0x0204,     /* R4   - System Control 2 */
+	0x0000,     /* R5   - System Hibernate */
+	0x8A00,     /* R6   - Interface Control */
+	0x0000,     /* R7 */
+	0x8000,     /* R8   - Power mgmt (1) */
+	0x0000,     /* R9   - Power mgmt (2) */
+	0x0000,     /* R10  - Power mgmt (3) */
+	0x2000,     /* R11  - Power mgmt (4) */
+	0x0E00,     /* R12  - Power mgmt (5) */
+	0x0000,     /* R13  - Power mgmt (6) */
+	0x0000,     /* R14  - Power mgmt (7) */
+	0x0000,     /* R15 */
+	0x0000,     /* R16  - RTC Seconds/Minutes */
+	0x0100,     /* R17  - RTC Hours/Day */
+	0x0101,     /* R18  - RTC Date/Month */
+	0x1400,     /* R19  - RTC Year */
+	0x0000,     /* R20  - Alarm Seconds/Minutes */
+	0x0000,     /* R21  - Alarm Hours/Day */
+	0x0000,     /* R22  - Alarm Date/Month */
+	0x0320,     /* R23  - RTC Time Control */
+	0x0000,     /* R24  - System Interrupts */
+	0x0000,     /* R25  - Interrupt Status 1 */
+	0x0000,     /* R26  - Interrupt Status 2 */
+	0x0000,     /* R27 */
+	0x0000,     /* R28  - Under Voltage Interrupt status */
+	0x0000,     /* R29  - Over Current Interrupt status */
+	0x0000,     /* R30  - GPIO Interrupt Status */
+	0x0000,     /* R31  - Comparator Interrupt Status */
+	0x3FFF,     /* R32  - System Interrupts Mask */
+	0x0000,     /* R33  - Interrupt Status 1 Mask */
+	0x0000,     /* R34  - Interrupt Status 2 Mask */
+	0x0000,     /* R35 */
+	0x0000,     /* R36  - Under Voltage Interrupt status Mask */
+	0x0000,     /* R37  - Over Current Interrupt status Mask */
+	0x0000,     /* R38  - GPIO Interrupt Status Mask */
+	0x0000,     /* R39  - Comparator Interrupt Status Mask */
+	0x0040,     /* R40  - Clock Control 1 */
+	0x0000,     /* R41  - Clock Control 2 */
+	0x3A00,     /* R42  - FLL Control 1 */
+	0x7086,     /* R43  - FLL Control 2 */
+	0xC226,     /* R44  - FLL Control 3 */
+	0x0000,     /* R45  - FLL Control 4 */
+	0x0000,     /* R46 */
+	0x0000,     /* R47 */
+	0x0000,     /* R48  - DAC Control */
+	0x0000,     /* R49 */
+	0x00C0,     /* R50  - DAC Digital Volume L */
+	0x00C0,     /* R51  - DAC Digital Volume R */
+	0x0000,     /* R52 */
+	0x0040,     /* R53  - DAC LR Rate */
+	0x0000,     /* R54  - DAC Clock Control */
+	0x0000,     /* R55 */
+	0x0000,     /* R56 */
+	0x0000,     /* R57 */
+	0x4000,     /* R58  - DAC Mute */
+	0x0000,     /* R59  - DAC Mute Volume */
+	0x0000,     /* R60  - DAC Side */
+	0x0000,     /* R61 */
+	0x0000,     /* R62 */
+	0x0000,     /* R63 */
+	0x8000,     /* R64  - ADC Control */
+	0x0000,     /* R65 */
+	0x00C0,     /* R66  - ADC Digital Volume L */
+	0x00C0,     /* R67  - ADC Digital Volume R */
+	0x0000,     /* R68  - ADC Divider */
+	0x0000,     /* R69 */
+	0x0040,     /* R70  - ADC LR Rate */
+	0x0000,     /* R71 */
+	0x0303,     /* R72  - Input Control */
+	0x0000,     /* R73  - IN3 Input Control */
+	0x0000,     /* R74  - Mic Bias Control */
+	0x0000,     /* R75 */
+	0x0000,     /* R76  - Output Control */
+	0x0000,     /* R77  - Jack Detect */
+	0x0000,     /* R78  - Anti Pop Control */
+	0x0000,     /* R79 */
+	0x0040,     /* R80  - Left Input Volume */
+	0x0040,     /* R81  - Right Input Volume */
+	0x0000,     /* R82 */
+	0x0000,     /* R83 */
+	0x0000,     /* R84 */
+	0x0000,     /* R85 */
+	0x0000,     /* R86 */
+	0x0000,     /* R87 */
+	0x0800,     /* R88  - Left Mixer Control */
+	0x1000,     /* R89  - Right Mixer Control */
+	0x0000,     /* R90 */
+	0x0000,     /* R91 */
+	0x0000,     /* R92  - OUT3 Mixer Control */
+	0x0000,     /* R93  - OUT4 Mixer Control */
+	0x0000,     /* R94 */
+	0x0000,     /* R95 */
+	0x0000,     /* R96  - Output Left Mixer Volume */
+	0x0000,     /* R97  - Output Right Mixer Volume */
+	0x0000,     /* R98  - Input Mixer Volume L */
+	0x0000,     /* R99  - Input Mixer Volume R */
+	0x0000,     /* R100 - Input Mixer Volume */
+	0x0000,     /* R101 */
+	0x0000,     /* R102 */
+	0x0000,     /* R103 */
+	0x00E4,     /* R104 - OUT1L Volume */
+	0x00E4,     /* R105 - OUT1R Volume */
+	0x00E4,     /* R106 - OUT2L Volume */
+	0x02E4,     /* R107 - OUT2R Volume */
+	0x0000,     /* R108 */
+	0x0000,     /* R109 */
+	0x0000,     /* R110 */
+	0x0000,     /* R111 - BEEP Volume */
+	0x0A00,     /* R112 - AI Formating */
+	0x0000,     /* R113 - ADC DAC COMP */
+	0x0020,     /* R114 - AI ADC Control */
+	0x0020,     /* R115 - AI DAC Control */
+	0x0000,     /* R116 */
+	0x0000,     /* R117 */
+	0x0000,     /* R118 */
+	0x0000,     /* R119 */
+	0x0000,     /* R120 */
+	0x0000,     /* R121 */
+	0x0000,     /* R122 */
+	0x0000,     /* R123 */
+	0x0000,     /* R124 */
+	0x0000,     /* R125 */
+	0x0000,     /* R126 */
+	0x0000,     /* R127 */
+	0x1FFF,     /* R128 - GPIO Debounce */
+	0x0010,     /* R129 - GPIO Pin pull up Control */
+	0x0000,     /* R130 - GPIO Pull down Control */
+	0x0000,     /* R131 - GPIO Interrupt Mode */
+	0x0000,     /* R132 */
+	0x0000,     /* R133 - GPIO Control */
+	0x0BFB,     /* R134 - GPIO Configuration (i/o) */
+	0x0FFD,     /* R135 - GPIO Pin Polarity / Type */
+	0x0000,     /* R136 */
+	0x0000,     /* R137 */
+	0x0000,     /* R138 */
+	0x0000,     /* R139 */
+	0x0310,     /* R140 - GPIO Function Select 1 */
+	0x0001,     /* R141 - GPIO Function Select 2 */
+	0x2300,     /* R142 - GPIO Function Select 3 */
+	0x0003,     /* R143 - GPIO Function Select 4 */
+	0x0000,     /* R144 - Digitiser Control (1) */
+	0x0002,     /* R145 - Digitiser Control (2) */
+	0x0000,     /* R146 */
+	0x0000,     /* R147 */
+	0x0000,     /* R148 */
+	0x0000,     /* R149 */
+	0x0000,     /* R150 */
+	0x0000,     /* R151 */
+	0x7000,     /* R152 - AUX1 Readback */
+	0x7000,     /* R153 - AUX2 Readback */
+	0x7000,     /* R154 - AUX3 Readback */
+	0x7000,     /* R155 - AUX4 Readback */
+	0x0000,     /* R156 - USB Voltage Readback */
+	0x0000,     /* R157 - LINE Voltage Readback */
+	0x0000,     /* R158 - BATT Voltage Readback */
+	0x0000,     /* R159 - Chip Temp Readback */
+	0x0000,     /* R160 */
+	0x0000,     /* R161 */
+	0x0000,     /* R162 */
+	0x0000,     /* R163 - Generic Comparator Control */
+	0x0000,     /* R164 - Generic comparator 1 */
+	0x0000,     /* R165 - Generic comparator 2 */
+	0x0000,     /* R166 - Generic comparator 3 */
+	0x0000,     /* R167 - Generic comparator 4 */
+	0xA00F,     /* R168 - Battery Charger Control 1 */
+	0x0B06,     /* R169 - Battery Charger Control 2 */
+	0x0000,     /* R170 - Battery Charger Control 3 */
+	0x0000,     /* R171 */
+	0x0000,     /* R172 - Current Sink Driver A */
+	0x0000,     /* R173 - CSA Flash control */
+	0x0000,     /* R174 */
+	0x0000,     /* R175 */
+	0x0000,     /* R176 - DCDC/LDO requested */
+	0x032D,     /* R177 - DCDC Active options */
+	0x0000,     /* R178 - DCDC Sleep options */
+	0x0025,     /* R179 - Power-check comparator */
+	0x000E,     /* R180 - DCDC1 Control */
+	0x0400,     /* R181 - DCDC1 Timeouts */
+	0x1006,     /* R182 - DCDC1 Low Power */
+	0x0018,     /* R183 - DCDC2 Control */
+	0x0000,     /* R184 - DCDC2 Timeouts */
+	0x0000,     /* R185 */
+	0x0026,     /* R186 - DCDC3 Control */
+	0x0800,     /* R187 - DCDC3 Timeouts */
+	0x0006,     /* R188 - DCDC3 Low Power */
+	0x0062,     /* R189 - DCDC4 Control */
+	0x1400,     /* R190 - DCDC4 Timeouts */
+	0x0006,     /* R191 - DCDC4 Low Power */
+	0x0008,     /* R192 */
+	0x0000,     /* R193 */
+	0x0000,     /* R194 */
+	0x0026,     /* R195 */
+	0x0400,     /* R196 */
+	0x0006,     /* R197 */
+	0x0000,     /* R198 */
+	0x0003,     /* R199 - Limit Switch Control */
+	0x0006,     /* R200 - LDO1 Control */
+	0x0C00,     /* R201 - LDO1 Timeouts */
+	0x001C,     /* R202 - LDO1 Low Power */
+	0x0016,     /* R203 - LDO2 Control */
+	0x0000,     /* R204 - LDO2 Timeouts */
+	0x001C,     /* R205 - LDO2 Low Power */
+	0x0019,     /* R206 - LDO3 Control */
+	0x0000,     /* R207 - LDO3 Timeouts */
+	0x001C,     /* R208 - LDO3 Low Power */
+	0x001A,     /* R209 - LDO4 Control */
+	0x1000,     /* R210 - LDO4 Timeouts */
+	0x001C,     /* R211 - LDO4 Low Power */
+	0x0000,     /* R212 */
+	0x0000,     /* R213 */
+	0x0000,     /* R214 */
+	0x0000,     /* R215 - VCC_FAULT Masks */
+	0x001F,     /* R216 - Main Bandgap Control */
+	0x0000,     /* R217 - OSC Control */
+	0x9000,     /* R218 - RTC Tick Control */
+	0x0000,     /* R219 - Security1 */
+	0x4000,     /* R220 */
+	0x0000,     /* R221 */
+	0x0000,     /* R222 */
+	0x0000,     /* R223 */
+	0x0000,     /* R224 - Signal overrides */
+	0x0000,     /* R225 - DCDC/LDO status */
+	0x0000,     /* R226 - Charger Overides/status */
+	0x0000,     /* R227 - misc overrides */
+	0x0000,     /* R228 - Supply overrides/status 1 */
+	0x0000,     /* R229 - Supply overrides/status 2 */
+	0xE000,     /* R230 - GPIO Pin Status */
+	0x0000,     /* R231 - comparotor overrides */
+	0x0000,     /* R232 */
+	0x0000,     /* R233 - State Machine status */
+	0x1200,     /* R234 - FLL Test 1 */
+	0x0000,     /* R235 */
+	0x8000,     /* R236 */
+	0x0000,     /* R237 */
+	0x0000,     /* R238 */
+	0x0000,     /* R239 */
+	0x0003,     /* R240 */
+	0x0000,     /* R241 */
+	0x0000,     /* R242 */
+	0x0004,     /* R243 */
+	0x0300,     /* R244 */
+	0x0000,     /* R245 */
+	0x0200,     /* R246 */
+	0x0000,     /* R247 */
+	0x1000,     /* R248 - DCDC1 Test Controls */
+	0x1000,     /* R249 */
+	0x1000,     /* R250 - DCDC3 Test Controls */
+	0x1000,     /* R251 - DCDC4 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8352_mode0_defaults[] = {
+	0x6143,     /* R0   - Reset/ID */
+	0x0000,     /* R1   - ID */
+	0x0002,     /* R2   - Revision */
+	0x1C02,     /* R3   - System Control 1 */
+	0x0004,     /* R4   - System Control 2 */
+	0x0000,     /* R5   - System Hibernate */
+	0x8A00,     /* R6   - Interface Control */
+	0x0000,     /* R7 */
+	0x8000,     /* R8   - Power mgmt (1) */
+	0x0000,     /* R9   - Power mgmt (2) */
+	0x0000,     /* R10  - Power mgmt (3) */
+	0x2000,     /* R11  - Power mgmt (4) */
+	0x0E00,     /* R12  - Power mgmt (5) */
+	0x0000,     /* R13  - Power mgmt (6) */
+	0x0000,     /* R14  - Power mgmt (7) */
+	0x0000,     /* R15 */
+	0x0000,     /* R16  - RTC Seconds/Minutes */
+	0x0100,     /* R17  - RTC Hours/Day */
+	0x0101,     /* R18  - RTC Date/Month */
+	0x1400,     /* R19  - RTC Year */
+	0x0000,     /* R20  - Alarm Seconds/Minutes */
+	0x0000,     /* R21  - Alarm Hours/Day */
+	0x0000,     /* R22  - Alarm Date/Month */
+	0x0320,     /* R23  - RTC Time Control */
+	0x0000,     /* R24  - System Interrupts */
+	0x0000,     /* R25  - Interrupt Status 1 */
+	0x0000,     /* R26  - Interrupt Status 2 */
+	0x0000,     /* R27 */
+	0x0000,     /* R28  - Under Voltage Interrupt status */
+	0x0000,     /* R29  - Over Current Interrupt status */
+	0x0000,     /* R30  - GPIO Interrupt Status */
+	0x0000,     /* R31  - Comparator Interrupt Status */
+	0x3FFF,     /* R32  - System Interrupts Mask */
+	0x0000,     /* R33  - Interrupt Status 1 Mask */
+	0x0000,     /* R34  - Interrupt Status 2 Mask */
+	0x0000,     /* R35 */
+	0x0000,     /* R36  - Under Voltage Interrupt status Mask */
+	0x0000,     /* R37  - Over Current Interrupt status Mask */
+	0x0000,     /* R38  - GPIO Interrupt Status Mask */
+	0x0000,     /* R39  - Comparator Interrupt Status Mask */
+	0x0040,     /* R40  - Clock Control 1 */
+	0x0000,     /* R41  - Clock Control 2 */
+	0x3A00,     /* R42  - FLL Control 1 */
+	0x7086,     /* R43  - FLL Control 2 */
+	0xC226,     /* R44  - FLL Control 3 */
+	0x0000,     /* R45  - FLL Control 4 */
+	0x0000,     /* R46 */
+	0x0000,     /* R47 */
+	0x0000,     /* R48  - DAC Control */
+	0x0000,     /* R49 */
+	0x00C0,     /* R50  - DAC Digital Volume L */
+	0x00C0,     /* R51  - DAC Digital Volume R */
+	0x0000,     /* R52 */
+	0x0040,     /* R53  - DAC LR Rate */
+	0x0000,     /* R54  - DAC Clock Control */
+	0x0000,     /* R55 */
+	0x0000,     /* R56 */
+	0x0000,     /* R57 */
+	0x4000,     /* R58  - DAC Mute */
+	0x0000,     /* R59  - DAC Mute Volume */
+	0x0000,     /* R60  - DAC Side */
+	0x0000,     /* R61 */
+	0x0000,     /* R62 */
+	0x0000,     /* R63 */
+	0x8000,     /* R64  - ADC Control */
+	0x0000,     /* R65 */
+	0x00C0,     /* R66  - ADC Digital Volume L */
+	0x00C0,     /* R67  - ADC Digital Volume R */
+	0x0000,     /* R68  - ADC Divider */
+	0x0000,     /* R69 */
+	0x0040,     /* R70  - ADC LR Rate */
+	0x0000,     /* R71 */
+	0x0303,     /* R72  - Input Control */
+	0x0000,     /* R73  - IN3 Input Control */
+	0x0000,     /* R74  - Mic Bias Control */
+	0x0000,     /* R75 */
+	0x0000,     /* R76  - Output Control */
+	0x0000,     /* R77  - Jack Detect */
+	0x0000,     /* R78  - Anti Pop Control */
+	0x0000,     /* R79 */
+	0x0040,     /* R80  - Left Input Volume */
+	0x0040,     /* R81  - Right Input Volume */
+	0x0000,     /* R82 */
+	0x0000,     /* R83 */
+	0x0000,     /* R84 */
+	0x0000,     /* R85 */
+	0x0000,     /* R86 */
+	0x0000,     /* R87 */
+	0x0800,     /* R88  - Left Mixer Control */
+	0x1000,     /* R89  - Right Mixer Control */
+	0x0000,     /* R90 */
+	0x0000,     /* R91 */
+	0x0000,     /* R92  - OUT3 Mixer Control */
+	0x0000,     /* R93  - OUT4 Mixer Control */
+	0x0000,     /* R94 */
+	0x0000,     /* R95 */
+	0x0000,     /* R96  - Output Left Mixer Volume */
+	0x0000,     /* R97  - Output Right Mixer Volume */
+	0x0000,     /* R98  - Input Mixer Volume L */
+	0x0000,     /* R99  - Input Mixer Volume R */
+	0x0000,     /* R100 - Input Mixer Volume */
+	0x0000,     /* R101 */
+	0x0000,     /* R102 */
+	0x0000,     /* R103 */
+	0x00E4,     /* R104 - OUT1L Volume */
+	0x00E4,     /* R105 - OUT1R Volume */
+	0x00E4,     /* R106 - OUT2L Volume */
+	0x02E4,     /* R107 - OUT2R Volume */
+	0x0000,     /* R108 */
+	0x0000,     /* R109 */
+	0x0000,     /* R110 */
+	0x0000,     /* R111 - BEEP Volume */
+	0x0A00,     /* R112 - AI Formating */
+	0x0000,     /* R113 - ADC DAC COMP */
+	0x0020,     /* R114 - AI ADC Control */
+	0x0020,     /* R115 - AI DAC Control */
+	0x0000,     /* R116 */
+	0x0000,     /* R117 */
+	0x0000,     /* R118 */
+	0x0000,     /* R119 */
+	0x0000,     /* R120 */
+	0x0000,     /* R121 */
+	0x0000,     /* R122 */
+	0x0000,     /* R123 */
+	0x0000,     /* R124 */
+	0x0000,     /* R125 */
+	0x0000,     /* R126 */
+	0x0000,     /* R127 */
+	0x1FFF,     /* R128 - GPIO Debounce */
+	0x0000,     /* R129 - GPIO Pin pull up Control */
+	0x0000,     /* R130 - GPIO Pull down Control */
+	0x0000,     /* R131 - GPIO Interrupt Mode */
+	0x0000,     /* R132 */
+	0x0000,     /* R133 - GPIO Control */
+	0x0FFC,     /* R134 - GPIO Configuration (i/o) */
+	0x0FFC,     /* R135 - GPIO Pin Polarity / Type */
+	0x0000,     /* R136 */
+	0x0000,     /* R137 */
+	0x0000,     /* R138 */
+	0x0000,     /* R139 */
+	0x0013,     /* R140 - GPIO Function Select 1 */
+	0x0000,     /* R141 - GPIO Function Select 2 */
+	0x0000,     /* R142 - GPIO Function Select 3 */
+	0x0003,     /* R143 - GPIO Function Select 4 */
+	0x0000,     /* R144 - Digitiser Control (1) */
+	0x0002,     /* R145 - Digitiser Control (2) */
+	0x0000,     /* R146 */
+	0x0000,     /* R147 */
+	0x0000,     /* R148 */
+	0x0000,     /* R149 */
+	0x0000,     /* R150 */
+	0x0000,     /* R151 */
+	0x7000,     /* R152 - AUX1 Readback */
+	0x7000,     /* R153 - AUX2 Readback */
+	0x7000,     /* R154 - AUX3 Readback */
+	0x7000,     /* R155 - AUX4 Readback */
+	0x0000,     /* R156 - USB Voltage Readback */
+	0x0000,     /* R157 - LINE Voltage Readback */
+	0x0000,     /* R158 - BATT Voltage Readback */
+	0x0000,     /* R159 - Chip Temp Readback */
+	0x0000,     /* R160 */
+	0x0000,     /* R161 */
+	0x0000,     /* R162 */
+	0x0000,     /* R163 - Generic Comparator Control */
+	0x0000,     /* R164 - Generic comparator 1 */
+	0x0000,     /* R165 - Generic comparator 2 */
+	0x0000,     /* R166 - Generic comparator 3 */
+	0x0000,     /* R167 - Generic comparator 4 */
+	0xA00F,     /* R168 - Battery Charger Control 1 */
+	0x0B06,     /* R169 - Battery Charger Control 2 */
+	0x0000,     /* R170 - Battery Charger Control 3 */
+	0x0000,     /* R171 */
+	0x0000,     /* R172 - Current Sink Driver A */
+	0x0000,     /* R173 - CSA Flash control */
+	0x0000,     /* R174 - Current Sink Driver B */
+	0x0000,     /* R175 - CSB Flash control */
+	0x0000,     /* R176 - DCDC/LDO requested */
+	0x032D,     /* R177 - DCDC Active options */
+	0x0000,     /* R178 - DCDC Sleep options */
+	0x0025,     /* R179 - Power-check comparator */
+	0x000E,     /* R180 - DCDC1 Control */
+	0x0000,     /* R181 - DCDC1 Timeouts */
+	0x1006,     /* R182 - DCDC1 Low Power */
+	0x0018,     /* R183 - DCDC2 Control */
+	0x0000,     /* R184 - DCDC2 Timeouts */
+	0x0000,     /* R185 */
+	0x0000,     /* R186 - DCDC3 Control */
+	0x0000,     /* R187 - DCDC3 Timeouts */
+	0x0006,     /* R188 - DCDC3 Low Power */
+	0x0000,     /* R189 - DCDC4 Control */
+	0x0000,     /* R190 - DCDC4 Timeouts */
+	0x0006,     /* R191 - DCDC4 Low Power */
+	0x0008,     /* R192 - DCDC5 Control */
+	0x0000,     /* R193 - DCDC5 Timeouts */
+	0x0000,     /* R194 */
+	0x0000,     /* R195 - DCDC6 Control */
+	0x0000,     /* R196 - DCDC6 Timeouts */
+	0x0006,     /* R197 - DCDC6 Low Power */
+	0x0000,     /* R198 */
+	0x0003,     /* R199 - Limit Switch Control */
+	0x001C,     /* R200 - LDO1 Control */
+	0x0000,     /* R201 - LDO1 Timeouts */
+	0x001C,     /* R202 - LDO1 Low Power */
+	0x001B,     /* R203 - LDO2 Control */
+	0x0000,     /* R204 - LDO2 Timeouts */
+	0x001C,     /* R205 - LDO2 Low Power */
+	0x001B,     /* R206 - LDO3 Control */
+	0x0000,     /* R207 - LDO3 Timeouts */
+	0x001C,     /* R208 - LDO3 Low Power */
+	0x001B,     /* R209 - LDO4 Control */
+	0x0000,     /* R210 - LDO4 Timeouts */
+	0x001C,     /* R211 - LDO4 Low Power */
+	0x0000,     /* R212 */
+	0x0000,     /* R213 */
+	0x0000,     /* R214 */
+	0x0000,     /* R215 - VCC_FAULT Masks */
+	0x001F,     /* R216 - Main Bandgap Control */
+	0x0000,     /* R217 - OSC Control */
+	0x9000,     /* R218 - RTC Tick Control */
+	0x0000,     /* R219 - Security1 */
+	0x4000,     /* R220 */
+	0x0000,     /* R221 */
+	0x0000,     /* R222 */
+	0x0000,     /* R223 */
+	0x0000,     /* R224 - Signal overrides */
+	0x0000,     /* R225 - DCDC/LDO status */
+	0x0000,     /* R226 - Charger Overides/status */
+	0x0000,     /* R227 - misc overrides */
+	0x0000,     /* R228 - Supply overrides/status 1 */
+	0x0000,     /* R229 - Supply overrides/status 2 */
+	0xE000,     /* R230 - GPIO Pin Status */
+	0x0000,     /* R231 - comparotor overrides */
+	0x0000,     /* R232 */
+	0x0000,     /* R233 - State Machine status */
+	0x1200,     /* R234 */
+	0x0000,     /* R235 */
+	0x8000,     /* R236 */
+	0x0000,     /* R237 */
+	0x0000,     /* R238 */
+	0x0000,     /* R239 */
+	0x0003,     /* R240 */
+	0x0000,     /* R241 */
+	0x0000,     /* R242 */
+	0x0004,     /* R243 */
+	0x0300,     /* R244 */
+	0x0000,     /* R245 */
+	0x0200,     /* R246 */
+	0x0000,     /* R247 */
+	0x1000,     /* R248 - DCDC1 Test Controls */
+	0x5000,     /* R249 */
+	0x1000,     /* R250 - DCDC3 Test Controls */
+	0x1000,     /* R251 - DCDC4 Test Controls */
+	0x5100,     /* R252 */
+	0x1000,     /* R253 - DCDC6 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8352_mode1_defaults[] = {
+	0x6143,     /* R0   - Reset/ID */
+	0x0000,     /* R1   - ID */
+	0x0002,     /* R2   - Revision */
+	0x1C02,     /* R3   - System Control 1 */
+	0x0204,     /* R4   - System Control 2 */
+	0x0000,     /* R5   - System Hibernate */
+	0x8A00,     /* R6   - Interface Control */
+	0x0000,     /* R7 */
+	0x8000,     /* R8   - Power mgmt (1) */
+	0x0000,     /* R9   - Power mgmt (2) */
+	0x0000,     /* R10  - Power mgmt (3) */
+	0x2000,     /* R11  - Power mgmt (4) */
+	0x0E00,     /* R12  - Power mgmt (5) */
+	0x0000,     /* R13  - Power mgmt (6) */
+	0x0000,     /* R14  - Power mgmt (7) */
+	0x0000,     /* R15 */
+	0x0000,     /* R16  - RTC Seconds/Minutes */
+	0x0100,     /* R17  - RTC Hours/Day */
+	0x0101,     /* R18  - RTC Date/Month */
+	0x1400,     /* R19  - RTC Year */
+	0x0000,     /* R20  - Alarm Seconds/Minutes */
+	0x0000,     /* R21  - Alarm Hours/Day */
+	0x0000,     /* R22  - Alarm Date/Month */
+	0x0320,     /* R23  - RTC Time Control */
+	0x0000,     /* R24  - System Interrupts */
+	0x0000,     /* R25  - Interrupt Status 1 */
+	0x0000,     /* R26  - Interrupt Status 2 */
+	0x0000,     /* R27 */
+	0x0000,     /* R28  - Under Voltage Interrupt status */
+	0x0000,     /* R29  - Over Current Interrupt status */
+	0x0000,     /* R30  - GPIO Interrupt Status */
+	0x0000,     /* R31  - Comparator Interrupt Status */
+	0x3FFF,     /* R32  - System Interrupts Mask */
+	0x0000,     /* R33  - Interrupt Status 1 Mask */
+	0x0000,     /* R34  - Interrupt Status 2 Mask */
+	0x0000,     /* R35 */
+	0x0000,     /* R36  - Under Voltage Interrupt status Mask */
+	0x0000,     /* R37  - Over Current Interrupt status Mask */
+	0x0000,     /* R38  - GPIO Interrupt Status Mask */
+	0x0000,     /* R39  - Comparator Interrupt Status Mask */
+	0x0040,     /* R40  - Clock Control 1 */
+	0x0000,     /* R41  - Clock Control 2 */
+	0x3A00,     /* R42  - FLL Control 1 */
+	0x7086,     /* R43  - FLL Control 2 */
+	0xC226,     /* R44  - FLL Control 3 */
+	0x0000,     /* R45  - FLL Control 4 */
+	0x0000,     /* R46 */
+	0x0000,     /* R47 */
+	0x0000,     /* R48  - DAC Control */
+	0x0000,     /* R49 */
+	0x00C0,     /* R50  - DAC Digital Volume L */
+	0x00C0,     /* R51  - DAC Digital Volume R */
+	0x0000,     /* R52 */
+	0x0040,     /* R53  - DAC LR Rate */
+	0x0000,     /* R54  - DAC Clock Control */
+	0x0000,     /* R55 */
+	0x0000,     /* R56 */
+	0x0000,     /* R57 */
+	0x4000,     /* R58  - DAC Mute */
+	0x0000,     /* R59  - DAC Mute Volume */
+	0x0000,     /* R60  - DAC Side */
+	0x0000,     /* R61 */
+	0x0000,     /* R62 */
+	0x0000,     /* R63 */
+	0x8000,     /* R64  - ADC Control */
+	0x0000,     /* R65 */
+	0x00C0,     /* R66  - ADC Digital Volume L */
+	0x00C0,     /* R67  - ADC Digital Volume R */
+	0x0000,     /* R68  - ADC Divider */
+	0x0000,     /* R69 */
+	0x0040,     /* R70  - ADC LR Rate */
+	0x0000,     /* R71 */
+	0x0303,     /* R72  - Input Control */
+	0x0000,     /* R73  - IN3 Input Control */
+	0x0000,     /* R74  - Mic Bias Control */
+	0x0000,     /* R75 */
+	0x0000,     /* R76  - Output Control */
+	0x0000,     /* R77  - Jack Detect */
+	0x0000,     /* R78  - Anti Pop Control */
+	0x0000,     /* R79 */
+	0x0040,     /* R80  - Left Input Volume */
+	0x0040,     /* R81  - Right Input Volume */
+	0x0000,     /* R82 */
+	0x0000,     /* R83 */
+	0x0000,     /* R84 */
+	0x0000,     /* R85 */
+	0x0000,     /* R86 */
+	0x0000,     /* R87 */
+	0x0800,     /* R88  - Left Mixer Control */
+	0x1000,     /* R89  - Right Mixer Control */
+	0x0000,     /* R90 */
+	0x0000,     /* R91 */
+	0x0000,     /* R92  - OUT3 Mixer Control */
+	0x0000,     /* R93  - OUT4 Mixer Control */
+	0x0000,     /* R94 */
+	0x0000,     /* R95 */
+	0x0000,     /* R96  - Output Left Mixer Volume */
+	0x0000,     /* R97  - Output Right Mixer Volume */
+	0x0000,     /* R98  - Input Mixer Volume L */
+	0x0000,     /* R99  - Input Mixer Volume R */
+	0x0000,     /* R100 - Input Mixer Volume */
+	0x0000,     /* R101 */
+	0x0000,     /* R102 */
+	0x0000,     /* R103 */
+	0x00E4,     /* R104 - OUT1L Volume */
+	0x00E4,     /* R105 - OUT1R Volume */
+	0x00E4,     /* R106 - OUT2L Volume */
+	0x02E4,     /* R107 - OUT2R Volume */
+	0x0000,     /* R108 */
+	0x0000,     /* R109 */
+	0x0000,     /* R110 */
+	0x0000,     /* R111 - BEEP Volume */
+	0x0A00,     /* R112 - AI Formating */
+	0x0000,     /* R113 - ADC DAC COMP */
+	0x0020,     /* R114 - AI ADC Control */
+	0x0020,     /* R115 - AI DAC Control */
+	0x0000,     /* R116 */
+	0x0000,     /* R117 */
+	0x0000,     /* R118 */
+	0x0000,     /* R119 */
+	0x0000,     /* R120 */
+	0x0000,     /* R121 */
+	0x0000,     /* R122 */
+	0x0000,     /* R123 */
+	0x0000,     /* R124 */
+	0x0000,     /* R125 */
+	0x0000,     /* R126 */
+	0x0000,     /* R127 */
+	0x1FFF,     /* R128 - GPIO Debounce */
+	0x0000,     /* R129 - GPIO Pin pull up Control */
+	0x0000,     /* R130 - GPIO Pull down Control */
+	0x0000,     /* R131 - GPIO Interrupt Mode */
+	0x0000,     /* R132 */
+	0x0000,     /* R133 - GPIO Control */
+	0x0BFB,     /* R134 - GPIO Configuration (i/o) */
+	0x0FFF,     /* R135 - GPIO Pin Polarity / Type */
+	0x0000,     /* R136 */
+	0x0000,     /* R137 */
+	0x0000,     /* R138 */
+	0x0000,     /* R139 */
+	0x0300,     /* R140 - GPIO Function Select 1 */
+	0x0000,     /* R141 - GPIO Function Select 2 */
+	0x2300,     /* R142 - GPIO Function Select 3 */
+	0x0003,     /* R143 - GPIO Function Select 4 */
+	0x0000,     /* R144 - Digitiser Control (1) */
+	0x0002,     /* R145 - Digitiser Control (2) */
+	0x0000,     /* R146 */
+	0x0000,     /* R147 */
+	0x0000,     /* R148 */
+	0x0000,     /* R149 */
+	0x0000,     /* R150 */
+	0x0000,     /* R151 */
+	0x7000,     /* R152 - AUX1 Readback */
+	0x7000,     /* R153 - AUX2 Readback */
+	0x7000,     /* R154 - AUX3 Readback */
+	0x7000,     /* R155 - AUX4 Readback */
+	0x0000,     /* R156 - USB Voltage Readback */
+	0x0000,     /* R157 - LINE Voltage Readback */
+	0x0000,     /* R158 - BATT Voltage Readback */
+	0x0000,     /* R159 - Chip Temp Readback */
+	0x0000,     /* R160 */
+	0x0000,     /* R161 */
+	0x0000,     /* R162 */
+	0x0000,     /* R163 - Generic Comparator Control */
+	0x0000,     /* R164 - Generic comparator 1 */
+	0x0000,     /* R165 - Generic comparator 2 */
+	0x0000,     /* R166 - Generic comparator 3 */
+	0x0000,     /* R167 - Generic comparator 4 */
+	0xA00F,     /* R168 - Battery Charger Control 1 */
+	0x0B06,     /* R169 - Battery Charger Control 2 */
+	0x0000,     /* R170 - Battery Charger Control 3 */
+	0x0000,     /* R171 */
+	0x0000,     /* R172 - Current Sink Driver A */
+	0x0000,     /* R173 - CSA Flash control */
+	0x0000,     /* R174 - Current Sink Driver B */
+	0x0000,     /* R175 - CSB Flash control */
+	0x0000,     /* R176 - DCDC/LDO requested */
+	0x032D,     /* R177 - DCDC Active options */
+	0x0000,     /* R178 - DCDC Sleep options */
+	0x0025,     /* R179 - Power-check comparator */
+	0x0062,     /* R180 - DCDC1 Control */
+	0x0400,     /* R181 - DCDC1 Timeouts */
+	0x1006,     /* R182 - DCDC1 Low Power */
+	0x0018,     /* R183 - DCDC2 Control */
+	0x0000,     /* R184 - DCDC2 Timeouts */
+	0x0000,     /* R185 */
+	0x0006,     /* R186 - DCDC3 Control */
+	0x0800,     /* R187 - DCDC3 Timeouts */
+	0x0006,     /* R188 - DCDC3 Low Power */
+	0x0006,     /* R189 - DCDC4 Control */
+	0x0C00,     /* R190 - DCDC4 Timeouts */
+	0x0006,     /* R191 - DCDC4 Low Power */
+	0x0008,     /* R192 - DCDC5 Control */
+	0x0000,     /* R193 - DCDC5 Timeouts */
+	0x0000,     /* R194 */
+	0x0026,     /* R195 - DCDC6 Control */
+	0x1000,     /* R196 - DCDC6 Timeouts */
+	0x0006,     /* R197 - DCDC6 Low Power */
+	0x0000,     /* R198 */
+	0x0003,     /* R199 - Limit Switch Control */
+	0x0002,     /* R200 - LDO1 Control */
+	0x0000,     /* R201 - LDO1 Timeouts */
+	0x001C,     /* R202 - LDO1 Low Power */
+	0x001A,     /* R203 - LDO2 Control */
+	0x0000,     /* R204 - LDO2 Timeouts */
+	0x001C,     /* R205 - LDO2 Low Power */
+	0x001F,     /* R206 - LDO3 Control */
+	0x0000,     /* R207 - LDO3 Timeouts */
+	0x001C,     /* R208 - LDO3 Low Power */
+	0x001F,     /* R209 - LDO4 Control */
+	0x0000,     /* R210 - LDO4 Timeouts */
+	0x001C,     /* R211 - LDO4 Low Power */
+	0x0000,     /* R212 */
+	0x0000,     /* R213 */
+	0x0000,     /* R214 */
+	0x0000,     /* R215 - VCC_FAULT Masks */
+	0x001F,     /* R216 - Main Bandgap Control */
+	0x0000,     /* R217 - OSC Control */
+	0x9000,     /* R218 - RTC Tick Control */
+	0x0000,     /* R219 - Security1 */
+	0x4000,     /* R220 */
+	0x0000,     /* R221 */
+	0x0000,     /* R222 */
+	0x0000,     /* R223 */
+	0x0000,     /* R224 - Signal overrides */
+	0x0000,     /* R225 - DCDC/LDO status */
+	0x0000,     /* R226 - Charger Overides/status */
+	0x0000,     /* R227 - misc overrides */
+	0x0000,     /* R228 - Supply overrides/status 1 */
+	0x0000,     /* R229 - Supply overrides/status 2 */
+	0xE000,     /* R230 - GPIO Pin Status */
+	0x0000,     /* R231 - comparotor overrides */
+	0x0000,     /* R232 */
+	0x0000,     /* R233 - State Machine status */
+	0x1200,     /* R234 */
+	0x0000,     /* R235 */
+	0x8000,     /* R236 */
+	0x0000,     /* R237 */
+	0x0000,     /* R238 */
+	0x0000,     /* R239 */
+	0x0003,     /* R240 */
+	0x0000,     /* R241 */
+	0x0000,     /* R242 */
+	0x0004,     /* R243 */
+	0x0300,     /* R244 */
+	0x0000,     /* R245 */
+	0x0200,     /* R246 */
+	0x0000,     /* R247 */
+	0x1000,     /* R248 - DCDC1 Test Controls */
+	0x5000,     /* R249 */
+	0x1000,     /* R250 - DCDC3 Test Controls */
+	0x1000,     /* R251 - DCDC4 Test Controls */
+	0x5100,     /* R252 */
+	0x1000,     /* R253 - DCDC6 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8352_mode2_defaults[] = {
+	0x6143,     /* R0   - Reset/ID */
+	0x0000,     /* R1   - ID */
+	0x0002,     /* R2   - Revision */
+	0x1C02,     /* R3   - System Control 1 */
+	0x0204,     /* R4   - System Control 2 */
+	0x0000,     /* R5   - System Hibernate */
+	0x8A00,     /* R6   - Interface Control */
+	0x0000,     /* R7 */
+	0x8000,     /* R8   - Power mgmt (1) */
+	0x0000,     /* R9   - Power mgmt (2) */
+	0x0000,     /* R10  - Power mgmt (3) */
+	0x2000,     /* R11  - Power mgmt (4) */
+	0x0E00,     /* R12  - Power mgmt (5) */
+	0x0000,     /* R13  - Power mgmt (6) */
+	0x0000,     /* R14  - Power mgmt (7) */
+	0x0000,     /* R15 */
+	0x0000,     /* R16  - RTC Seconds/Minutes */
+	0x0100,     /* R17  - RTC Hours/Day */
+	0x0101,     /* R18  - RTC Date/Month */
+	0x1400,     /* R19  - RTC Year */
+	0x0000,     /* R20  - Alarm Seconds/Minutes */
+	0x0000,     /* R21  - Alarm Hours/Day */
+	0x0000,     /* R22  - Alarm Date/Month */
+	0x0320,     /* R23  - RTC Time Control */
+	0x0000,     /* R24  - System Interrupts */
+	0x0000,     /* R25  - Interrupt Status 1 */
+	0x0000,     /* R26  - Interrupt Status 2 */
+	0x0000,     /* R27 */
+	0x0000,     /* R28  - Under Voltage Interrupt status */
+	0x0000,     /* R29  - Over Current Interrupt status */
+	0x0000,     /* R30  - GPIO Interrupt Status */
+	0x0000,     /* R31  - Comparator Interrupt Status */
+	0x3FFF,     /* R32  - System Interrupts Mask */
+	0x0000,     /* R33  - Interrupt Status 1 Mask */
+	0x0000,     /* R34  - Interrupt Status 2 Mask */
+	0x0000,     /* R35 */
+	0x0000,     /* R36  - Under Voltage Interrupt status Mask */
+	0x0000,     /* R37  - Over Current Interrupt status Mask */
+	0x0000,     /* R38  - GPIO Interrupt Status Mask */
+	0x0000,     /* R39  - Comparator Interrupt Status Mask */
+	0x0040,     /* R40  - Clock Control 1 */
+	0x0000,     /* R41  - Clock Control 2 */
+	0x3A00,     /* R42  - FLL Control 1 */
+	0x7086,     /* R43  - FLL Control 2 */
+	0xC226,     /* R44  - FLL Control 3 */
+	0x0000,     /* R45  - FLL Control 4 */
+	0x0000,     /* R46 */
+	0x0000,     /* R47 */
+	0x0000,     /* R48  - DAC Control */
+	0x0000,     /* R49 */
+	0x00C0,     /* R50  - DAC Digital Volume L */
+	0x00C0,     /* R51  - DAC Digital Volume R */
+	0x0000,     /* R52 */
+	0x0040,     /* R53  - DAC LR Rate */
+	0x0000,     /* R54  - DAC Clock Control */
+	0x0000,     /* R55 */
+	0x0000,     /* R56 */
+	0x0000,     /* R57 */
+	0x4000,     /* R58  - DAC Mute */
+	0x0000,     /* R59  - DAC Mute Volume */
+	0x0000,     /* R60  - DAC Side */
+	0x0000,     /* R61 */
+	0x0000,     /* R62 */
+	0x0000,     /* R63 */
+	0x8000,     /* R64  - ADC Control */
+	0x0000,     /* R65 */
+	0x00C0,     /* R66  - ADC Digital Volume L */
+	0x00C0,     /* R67  - ADC Digital Volume R */
+	0x0000,     /* R68  - ADC Divider */
+	0x0000,     /* R69 */
+	0x0040,     /* R70  - ADC LR Rate */
+	0x0000,     /* R71 */
+	0x0303,     /* R72  - Input Control */
+	0x0000,     /* R73  - IN3 Input Control */
+	0x0000,     /* R74  - Mic Bias Control */
+	0x0000,     /* R75 */
+	0x0000,     /* R76  - Output Control */
+	0x0000,     /* R77  - Jack Detect */
+	0x0000,     /* R78  - Anti Pop Control */
+	0x0000,     /* R79 */
+	0x0040,     /* R80  - Left Input Volume */
+	0x0040,     /* R81  - Right Input Volume */
+	0x0000,     /* R82 */
+	0x0000,     /* R83 */
+	0x0000,     /* R84 */
+	0x0000,     /* R85 */
+	0x0000,     /* R86 */
+	0x0000,     /* R87 */
+	0x0800,     /* R88  - Left Mixer Control */
+	0x1000,     /* R89  - Right Mixer Control */
+	0x0000,     /* R90 */
+	0x0000,     /* R91 */
+	0x0000,     /* R92  - OUT3 Mixer Control */
+	0x0000,     /* R93  - OUT4 Mixer Control */
+	0x0000,     /* R94 */
+	0x0000,     /* R95 */
+	0x0000,     /* R96  - Output Left Mixer Volume */
+	0x0000,     /* R97  - Output Right Mixer Volume */
+	0x0000,     /* R98  - Input Mixer Volume L */
+	0x0000,     /* R99  - Input Mixer Volume R */
+	0x0000,     /* R100 - Input Mixer Volume */
+	0x0000,     /* R101 */
+	0x0000,     /* R102 */
+	0x0000,     /* R103 */
+	0x00E4,     /* R104 - OUT1L Volume */
+	0x00E4,     /* R105 - OUT1R Volume */
+	0x00E4,     /* R106 - OUT2L Volume */
+	0x02E4,     /* R107 - OUT2R Volume */
+	0x0000,     /* R108 */
+	0x0000,     /* R109 */
+	0x0000,     /* R110 */
+	0x0000,     /* R111 - BEEP Volume */
+	0x0A00,     /* R112 - AI Formating */
+	0x0000,     /* R113 - ADC DAC COMP */
+	0x0020,     /* R114 - AI ADC Control */
+	0x0020,     /* R115 - AI DAC Control */
+	0x0000,     /* R116 */
+	0x0000,     /* R117 */
+	0x0000,     /* R118 */
+	0x0000,     /* R119 */
+	0x0000,     /* R120 */
+	0x0000,     /* R121 */
+	0x0000,     /* R122 */
+	0x0000,     /* R123 */
+	0x0000,     /* R124 */
+	0x0000,     /* R125 */
+	0x0000,     /* R126 */
+	0x0000,     /* R127 */
+	0x1FFF,     /* R128 - GPIO Debounce */
+	0x0000,     /* R129 - GPIO Pin pull up Control */
+	0x0110,     /* R130 - GPIO Pull down Control */
+	0x0000,     /* R131 - GPIO Interrupt Mode */
+	0x0000,     /* R132 */
+	0x0000,     /* R133 - GPIO Control */
+	0x09DA,     /* R134 - GPIO Configuration (i/o) */
+	0x0DD6,     /* R135 - GPIO Pin Polarity / Type */
+	0x0000,     /* R136 */
+	0x0000,     /* R137 */
+	0x0000,     /* R138 */
+	0x0000,     /* R139 */
+	0x1310,     /* R140 - GPIO Function Select 1 */
+	0x0033,     /* R141 - GPIO Function Select 2 */
+	0x2000,     /* R142 - GPIO Function Select 3 */
+	0x0000,     /* R143 - GPIO Function Select 4 */
+	0x0000,     /* R144 - Digitiser Control (1) */
+	0x0002,     /* R145 - Digitiser Control (2) */
+	0x0000,     /* R146 */
+	0x0000,     /* R147 */
+	0x0000,     /* R148 */
+	0x0000,     /* R149 */
+	0x0000,     /* R150 */
+	0x0000,     /* R151 */
+	0x7000,     /* R152 - AUX1 Readback */
+	0x7000,     /* R153 - AUX2 Readback */
+	0x7000,     /* R154 - AUX3 Readback */
+	0x7000,     /* R155 - AUX4 Readback */
+	0x0000,     /* R156 - USB Voltage Readback */
+	0x0000,     /* R157 - LINE Voltage Readback */
+	0x0000,     /* R158 - BATT Voltage Readback */
+	0x0000,     /* R159 - Chip Temp Readback */
+	0x0000,     /* R160 */
+	0x0000,     /* R161 */
+	0x0000,     /* R162 */
+	0x0000,     /* R163 - Generic Comparator Control */
+	0x0000,     /* R164 - Generic comparator 1 */
+	0x0000,     /* R165 - Generic comparator 2 */
+	0x0000,     /* R166 - Generic comparator 3 */
+	0x0000,     /* R167 - Generic comparator 4 */
+	0xA00F,     /* R168 - Battery Charger Control 1 */
+	0x0B06,     /* R169 - Battery Charger Control 2 */
+	0x0000,     /* R170 - Battery Charger Control 3 */
+	0x0000,     /* R171 */
+	0x0000,     /* R172 - Current Sink Driver A */
+	0x0000,     /* R173 - CSA Flash control */
+	0x0000,     /* R174 - Current Sink Driver B */
+	0x0000,     /* R175 - CSB Flash control */
+	0x0000,     /* R176 - DCDC/LDO requested */
+	0x032D,     /* R177 - DCDC Active options */
+	0x0000,     /* R178 - DCDC Sleep options */
+	0x0025,     /* R179 - Power-check comparator */
+	0x000E,     /* R180 - DCDC1 Control */
+	0x0800,     /* R181 - DCDC1 Timeouts */
+	0x1006,     /* R182 - DCDC1 Low Power */
+	0x0018,     /* R183 - DCDC2 Control */
+	0x0000,     /* R184 - DCDC2 Timeouts */
+	0x0000,     /* R185 */
+	0x0056,     /* R186 - DCDC3 Control */
+	0x1800,     /* R187 - DCDC3 Timeouts */
+	0x0006,     /* R188 - DCDC3 Low Power */
+	0x000E,     /* R189 - DCDC4 Control */
+	0x1000,     /* R190 - DCDC4 Timeouts */
+	0x0006,     /* R191 - DCDC4 Low Power */
+	0x0008,     /* R192 - DCDC5 Control */
+	0x0000,     /* R193 - DCDC5 Timeouts */
+	0x0000,     /* R194 */
+	0x0026,     /* R195 - DCDC6 Control */
+	0x0C00,     /* R196 - DCDC6 Timeouts */
+	0x0006,     /* R197 - DCDC6 Low Power */
+	0x0000,     /* R198 */
+	0x0003,     /* R199 - Limit Switch Control */
+	0x001C,     /* R200 - LDO1 Control */
+	0x0000,     /* R201 - LDO1 Timeouts */
+	0x001C,     /* R202 - LDO1 Low Power */
+	0x0006,     /* R203 - LDO2 Control */
+	0x0400,     /* R204 - LDO2 Timeouts */
+	0x001C,     /* R205 - LDO2 Low Power */
+	0x001C,     /* R206 - LDO3 Control */
+	0x1400,     /* R207 - LDO3 Timeouts */
+	0x001C,     /* R208 - LDO3 Low Power */
+	0x001A,     /* R209 - LDO4 Control */
+	0x0000,     /* R210 - LDO4 Timeouts */
+	0x001C,     /* R211 - LDO4 Low Power */
+	0x0000,     /* R212 */
+	0x0000,     /* R213 */
+	0x0000,     /* R214 */
+	0x0000,     /* R215 - VCC_FAULT Masks */
+	0x001F,     /* R216 - Main Bandgap Control */
+	0x0000,     /* R217 - OSC Control */
+	0x9000,     /* R218 - RTC Tick Control */
+	0x0000,     /* R219 - Security1 */
+	0x4000,     /* R220 */
+	0x0000,     /* R221 */
+	0x0000,     /* R222 */
+	0x0000,     /* R223 */
+	0x0000,     /* R224 - Signal overrides */
+	0x0000,     /* R225 - DCDC/LDO status */
+	0x0000,     /* R226 - Charger Overides/status */
+	0x0000,     /* R227 - misc overrides */
+	0x0000,     /* R228 - Supply overrides/status 1 */
+	0x0000,     /* R229 - Supply overrides/status 2 */
+	0xE000,     /* R230 - GPIO Pin Status */
+	0x0000,     /* R231 - comparotor overrides */
+	0x0000,     /* R232 */
+	0x0000,     /* R233 - State Machine status */
+	0x1200,     /* R234 */
+	0x0000,     /* R235 */
+	0x8000,     /* R236 */
+	0x0000,     /* R237 */
+	0x0000,     /* R238 */
+	0x0000,     /* R239 */
+	0x0003,     /* R240 */
+	0x0000,     /* R241 */
+	0x0000,     /* R242 */
+	0x0004,     /* R243 */
+	0x0300,     /* R244 */
+	0x0000,     /* R245 */
+	0x0200,     /* R246 */
+	0x0000,     /* R247 */
+	0x1000,     /* R248 - DCDC1 Test Controls */
+	0x5000,     /* R249 */
+	0x1000,     /* R250 - DCDC3 Test Controls */
+	0x1000,     /* R251 - DCDC4 Test Controls */
+	0x5100,     /* R252 */
+	0x1000,     /* R253 - DCDC6 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8352_mode3_defaults[] = {
+	0x6143,     /* R0   - Reset/ID */
+	0x0000,     /* R1   - ID */
+	0x0002,     /* R2   - Revision */
+	0x1C02,     /* R3   - System Control 1 */
+	0x0204,     /* R4   - System Control 2 */
+	0x0000,     /* R5   - System Hibernate */
+	0x8A00,     /* R6   - Interface Control */
+	0x0000,     /* R7 */
+	0x8000,     /* R8   - Power mgmt (1) */
+	0x0000,     /* R9   - Power mgmt (2) */
+	0x0000,     /* R10  - Power mgmt (3) */
+	0x2000,     /* R11  - Power mgmt (4) */
+	0x0E00,     /* R12  - Power mgmt (5) */
+	0x0000,     /* R13  - Power mgmt (6) */
+	0x0000,     /* R14  - Power mgmt (7) */
+	0x0000,     /* R15 */
+	0x0000,     /* R16  - RTC Seconds/Minutes */
+	0x0100,     /* R17  - RTC Hours/Day */
+	0x0101,     /* R18  - RTC Date/Month */
+	0x1400,     /* R19  - RTC Year */
+	0x0000,     /* R20  - Alarm Seconds/Minutes */
+	0x0000,     /* R21  - Alarm Hours/Day */
+	0x0000,     /* R22  - Alarm Date/Month */
+	0x0320,     /* R23  - RTC Time Control */
+	0x0000,     /* R24  - System Interrupts */
+	0x0000,     /* R25  - Interrupt Status 1 */
+	0x0000,     /* R26  - Interrupt Status 2 */
+	0x0000,     /* R27 */
+	0x0000,     /* R28  - Under Voltage Interrupt status */
+	0x0000,     /* R29  - Over Current Interrupt status */
+	0x0000,     /* R30  - GPIO Interrupt Status */
+	0x0000,     /* R31  - Comparator Interrupt Status */
+	0x3FFF,     /* R32  - System Interrupts Mask */
+	0x0000,     /* R33  - Interrupt Status 1 Mask */
+	0x0000,     /* R34  - Interrupt Status 2 Mask */
+	0x0000,     /* R35 */
+	0x0000,     /* R36  - Under Voltage Interrupt status Mask */
+	0x0000,     /* R37  - Over Current Interrupt status Mask */
+	0x0000,     /* R38  - GPIO Interrupt Status Mask */
+	0x0000,     /* R39  - Comparator Interrupt Status Mask */
+	0x0040,     /* R40  - Clock Control 1 */
+	0x0000,     /* R41  - Clock Control 2 */
+	0x3A00,     /* R42  - FLL Control 1 */
+	0x7086,     /* R43  - FLL Control 2 */
+	0xC226,     /* R44  - FLL Control 3 */
+	0x0000,     /* R45  - FLL Control 4 */
+	0x0000,     /* R46 */
+	0x0000,     /* R47 */
+	0x0000,     /* R48  - DAC Control */
+	0x0000,     /* R49 */
+	0x00C0,     /* R50  - DAC Digital Volume L */
+	0x00C0,     /* R51  - DAC Digital Volume R */
+	0x0000,     /* R52 */
+	0x0040,     /* R53  - DAC LR Rate */
+	0x0000,     /* R54  - DAC Clock Control */
+	0x0000,     /* R55 */
+	0x0000,     /* R56 */
+	0x0000,     /* R57 */
+	0x4000,     /* R58  - DAC Mute */
+	0x0000,     /* R59  - DAC Mute Volume */
+	0x0000,     /* R60  - DAC Side */
+	0x0000,     /* R61 */
+	0x0000,     /* R62 */
+	0x0000,     /* R63 */
+	0x8000,     /* R64  - ADC Control */
+	0x0000,     /* R65 */
+	0x00C0,     /* R66  - ADC Digital Volume L */
+	0x00C0,     /* R67  - ADC Digital Volume R */
+	0x0000,     /* R68  - ADC Divider */
+	0x0000,     /* R69 */
+	0x0040,     /* R70  - ADC LR Rate */
+	0x0000,     /* R71 */
+	0x0303,     /* R72  - Input Control */
+	0x0000,     /* R73  - IN3 Input Control */
+	0x0000,     /* R74  - Mic Bias Control */
+	0x0000,     /* R75 */
+	0x0000,     /* R76  - Output Control */
+	0x0000,     /* R77  - Jack Detect */
+	0x0000,     /* R78  - Anti Pop Control */
+	0x0000,     /* R79 */
+	0x0040,     /* R80  - Left Input Volume */
+	0x0040,     /* R81  - Right Input Volume */
+	0x0000,     /* R82 */
+	0x0000,     /* R83 */
+	0x0000,     /* R84 */
+	0x0000,     /* R85 */
+	0x0000,     /* R86 */
+	0x0000,     /* R87 */
+	0x0800,     /* R88  - Left Mixer Control */
+	0x1000,     /* R89  - Right Mixer Control */
+	0x0000,     /* R90 */
+	0x0000,     /* R91 */
+	0x0000,     /* R92  - OUT3 Mixer Control */
+	0x0000,     /* R93  - OUT4 Mixer Control */
+	0x0000,     /* R94 */
+	0x0000,     /* R95 */
+	0x0000,     /* R96  - Output Left Mixer Volume */
+	0x0000,     /* R97  - Output Right Mixer Volume */
+	0x0000,     /* R98  - Input Mixer Volume L */
+	0x0000,     /* R99  - Input Mixer Volume R */
+	0x0000,     /* R100 - Input Mixer Volume */
+	0x0000,     /* R101 */
+	0x0000,     /* R102 */
+	0x0000,     /* R103 */
+	0x00E4,     /* R104 - OUT1L Volume */
+	0x00E4,     /* R105 - OUT1R Volume */
+	0x00E4,     /* R106 - OUT2L Volume */
+	0x02E4,     /* R107 - OUT2R Volume */
+	0x0000,     /* R108 */
+	0x0000,     /* R109 */
+	0x0000,     /* R110 */
+	0x0000,     /* R111 - BEEP Volume */
+	0x0A00,     /* R112 - AI Formating */
+	0x0000,     /* R113 - ADC DAC COMP */
+	0x0020,     /* R114 - AI ADC Control */
+	0x0020,     /* R115 - AI DAC Control */
+	0x0000,     /* R116 */
+	0x0000,     /* R117 */
+	0x0000,     /* R118 */
+	0x0000,     /* R119 */
+	0x0000,     /* R120 */
+	0x0000,     /* R121 */
+	0x0000,     /* R122 */
+	0x0000,     /* R123 */
+	0x0000,     /* R124 */
+	0x0000,     /* R125 */
+	0x0000,     /* R126 */
+	0x0000,     /* R127 */
+	0x1FFF,     /* R128 - GPIO Debounce */
+	0x0010,     /* R129 - GPIO Pin pull up Control */
+	0x0000,     /* R130 - GPIO Pull down Control */
+	0x0000,     /* R131 - GPIO Interrupt Mode */
+	0x0000,     /* R132 */
+	0x0000,     /* R133 - GPIO Control */
+	0x0BFB,     /* R134 - GPIO Configuration (i/o) */
+	0x0FFD,     /* R135 - GPIO Pin Polarity / Type */
+	0x0000,     /* R136 */
+	0x0000,     /* R137 */
+	0x0000,     /* R138 */
+	0x0000,     /* R139 */
+	0x0310,     /* R140 - GPIO Function Select 1 */
+	0x0001,     /* R141 - GPIO Function Select 2 */
+	0x2300,     /* R142 - GPIO Function Select 3 */
+	0x0003,     /* R143 - GPIO Function Select 4 */
+	0x0000,     /* R144 - Digitiser Control (1) */
+	0x0002,     /* R145 - Digitiser Control (2) */
+	0x0000,     /* R146 */
+	0x0000,     /* R147 */
+	0x0000,     /* R148 */
+	0x0000,     /* R149 */
+	0x0000,     /* R150 */
+	0x0000,     /* R151 */
+	0x7000,     /* R152 - AUX1 Readback */
+	0x7000,     /* R153 - AUX2 Readback */
+	0x7000,     /* R154 - AUX3 Readback */
+	0x7000,     /* R155 - AUX4 Readback */
+	0x0000,     /* R156 - USB Voltage Readback */
+	0x0000,     /* R157 - LINE Voltage Readback */
+	0x0000,     /* R158 - BATT Voltage Readback */
+	0x0000,     /* R159 - Chip Temp Readback */
+	0x0000,     /* R160 */
+	0x0000,     /* R161 */
+	0x0000,     /* R162 */
+	0x0000,     /* R163 - Generic Comparator Control */
+	0x0000,     /* R164 - Generic comparator 1 */
+	0x0000,     /* R165 - Generic comparator 2 */
+	0x0000,     /* R166 - Generic comparator 3 */
+	0x0000,     /* R167 - Generic comparator 4 */
+	0xA00F,     /* R168 - Battery Charger Control 1 */
+	0x0B06,     /* R169 - Battery Charger Control 2 */
+	0x0000,     /* R170 - Battery Charger Control 3 */
+	0x0000,     /* R171 */
+	0x0000,     /* R172 - Current Sink Driver A */
+	0x0000,     /* R173 - CSA Flash control */
+	0x0000,     /* R174 - Current Sink Driver B */
+	0x0000,     /* R175 - CSB Flash control */
+	0x0000,     /* R176 - DCDC/LDO requested */
+	0x032D,     /* R177 - DCDC Active options */
+	0x0000,     /* R178 - DCDC Sleep options */
+	0x0025,     /* R179 - Power-check comparator */
+	0x0006,     /* R180 - DCDC1 Control */
+	0x0400,     /* R181 - DCDC1 Timeouts */
+	0x1006,     /* R182 - DCDC1 Low Power */
+	0x0018,     /* R183 - DCDC2 Control */
+	0x0000,     /* R184 - DCDC2 Timeouts */
+	0x0000,     /* R185 */
+	0x0050,     /* R186 - DCDC3 Control */
+	0x0C00,     /* R187 - DCDC3 Timeouts */
+	0x0006,     /* R188 - DCDC3 Low Power */
+	0x000E,     /* R189 - DCDC4 Control */
+	0x0400,     /* R190 - DCDC4 Timeouts */
+	0x0006,     /* R191 - DCDC4 Low Power */
+	0x0008,     /* R192 - DCDC5 Control */
+	0x0000,     /* R193 - DCDC5 Timeouts */
+	0x0000,     /* R194 */
+	0x0029,     /* R195 - DCDC6 Control */
+	0x0800,     /* R196 - DCDC6 Timeouts */
+	0x0006,     /* R197 - DCDC6 Low Power */
+	0x0000,     /* R198 */
+	0x0003,     /* R199 - Limit Switch Control */
+	0x001D,     /* R200 - LDO1 Control */
+	0x1000,     /* R201 - LDO1 Timeouts */
+	0x001C,     /* R202 - LDO1 Low Power */
+	0x0017,     /* R203 - LDO2 Control */
+	0x1000,     /* R204 - LDO2 Timeouts */
+	0x001C,     /* R205 - LDO2 Low Power */
+	0x0006,     /* R206 - LDO3 Control */
+	0x1000,     /* R207 - LDO3 Timeouts */
+	0x001C,     /* R208 - LDO3 Low Power */
+	0x0010,     /* R209 - LDO4 Control */
+	0x1000,     /* R210 - LDO4 Timeouts */
+	0x001C,     /* R211 - LDO4 Low Power */
+	0x0000,     /* R212 */
+	0x0000,     /* R213 */
+	0x0000,     /* R214 */
+	0x0000,     /* R215 - VCC_FAULT Masks */
+	0x001F,     /* R216 - Main Bandgap Control */
+	0x0000,     /* R217 - OSC Control */
+	0x9000,     /* R218 - RTC Tick Control */
+	0x0000,     /* R219 - Security1 */
+	0x4000,     /* R220 */
+	0x0000,     /* R221 */
+	0x0000,     /* R222 */
+	0x0000,     /* R223 */
+	0x0000,     /* R224 - Signal overrides */
+	0x0000,     /* R225 - DCDC/LDO status */
+	0x0000,     /* R226 - Charger Overides/status */
+	0x0000,     /* R227 - misc overrides */
+	0x0000,     /* R228 - Supply overrides/status 1 */
+	0x0000,     /* R229 - Supply overrides/status 2 */
+	0xE000,     /* R230 - GPIO Pin Status */
+	0x0000,     /* R231 - comparotor overrides */
+	0x0000,     /* R232 */
+	0x0000,     /* R233 - State Machine status */
+	0x1200,     /* R234 */
+	0x0000,     /* R235 */
+	0x8000,     /* R236 */
+	0x0000,     /* R237 */
+	0x0000,     /* R238 */
+	0x0000,     /* R239 */
+	0x0003,     /* R240 */
+	0x0000,     /* R241 */
+	0x0000,     /* R242 */
+	0x0004,     /* R243 */
+	0x0300,     /* R244 */
+	0x0000,     /* R245 */
+	0x0200,     /* R246 */
+	0x0000,     /* R247 */
+	0x1000,     /* R248 - DCDC1 Test Controls */
+	0x5000,     /* R249 */
+	0x1000,     /* R250 - DCDC3 Test Controls */
+	0x1000,     /* R251 - DCDC4 Test Controls */
+	0x5100,     /* R252 */
+	0x1000,     /* R253 - DCDC6 Test Controls */
+};
+#endif
+
 /* The register defaults for the config mode used must be compiled in but
  * due to the impact on kernel size it is possible to disable
  */
@@ -1307,14 +3403,14 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = {
 	{ 0xFF3F, 0xE03F, 0x0000 }, /* R216 - Main Bandgap Control */
 	{ 0xEF2F, 0xE02F, 0x0000 }, /* R217 - OSC Control */
 	{ 0xF3FF, 0xB3FF, 0xc000 }, /* R218 - RTC Tick Control */
-	{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R219 */
+	{ 0xFFFF, 0xFFFF, 0x0000 }, /* R219 - Security */
 	{ 0x09FF, 0x01FF, 0x0000 }, /* R220 - RAM BIST 1 */
 	{ 0x0000, 0x0000, 0x0000 }, /* R221 */
 	{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R222 */
 	{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R223 */
 	{ 0x0000, 0x0000, 0x0000 }, /* R224 */
 	{ 0x8F3F, 0x0000, 0xFFFF }, /* R225 - DCDC/LDO status */
-	{ 0x0000, 0x0000, 0x0000 }, /* R226 */
+	{ 0x0000, 0x0000, 0xFFFF }, /* R226 - Charger status */
 	{ 0x0000, 0x0000, 0xFFFF }, /* R227 */
 	{ 0x0000, 0x0000, 0x0000 }, /* R228 */
 	{ 0x0000, 0x0000, 0x0000 }, /* R229 */
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index 6a0cedb5bb8..cf30d06a010 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -15,6 +15,7 @@
 #include <linux/bug.h>
 #include <linux/i2c.h>
 #include <linux/kernel.h>
+#include <linux/mfd/core.h>
 #include <linux/mfd/wm8400-private.h>
 #include <linux/mfd/wm8400-audio.h>
 
@@ -239,6 +240,16 @@ void wm8400_reset_codec_reg_cache(struct wm8400 *wm8400)
 }
 EXPORT_SYMBOL_GPL(wm8400_reset_codec_reg_cache);
 
+static int wm8400_register_codec(struct wm8400 *wm8400)
+{
+	struct mfd_cell cell = {
+		.name = "wm8400-codec",
+		.driver_data = wm8400,
+	};
+
+	return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0);
+}
+
 /*
  * wm8400_init - Generic initialisation
  *
@@ -296,24 +307,32 @@ static int wm8400_init(struct wm8400 *wm8400,
 	reg = (reg & WM8400_CHIP_REV_MASK) >> WM8400_CHIP_REV_SHIFT;
 	dev_info(wm8400->dev, "WM8400 revision %x\n", reg);
 
+	ret = wm8400_register_codec(wm8400);
+	if (ret != 0) {
+		dev_err(wm8400->dev, "Failed to register codec\n");
+		goto err_children;
+	}
+
 	if (pdata && pdata->platform_init) {
 		ret = pdata->platform_init(wm8400->dev);
-		if (ret != 0)
+		if (ret != 0) {
 			dev_err(wm8400->dev, "Platform init failed: %d\n",
 				ret);
+			goto err_children;
+		}
 	} else
 		dev_warn(wm8400->dev, "No platform initialisation supplied\n");
 
+	return 0;
+
+err_children:
+	mfd_remove_devices(wm8400->dev);
 	return ret;
 }
 
 static void wm8400_release(struct wm8400 *wm8400)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(wm8400->regulators); i++)
-		if (wm8400->regulators[i].name)
-			platform_device_unregister(&wm8400->regulators[i]);
+	mfd_remove_devices(wm8400->dev);
 }
 
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)