diff options
author | Russell King <rmk+kernel@arm.linux.org.uk> | 2009-09-24 21:22:33 +0100 |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2009-09-24 21:22:33 +0100 |
commit | baea7b946f00a291b166ccae7fcfed6c01530cc6 (patch) | |
tree | 4aa275fbdbec9c7b9b4629e8bee2bbecd3c6a6af /drivers/mmc/core/sdio.c | |
parent | ae19ffbadc1b2100285a5b5b3d0a4e0a11390904 (diff) | |
parent | 94e0fb086fc5663c38bbc0fe86d698be8314f82f (diff) |
Merge branch 'origin' into for-linus
Conflicts:
MAINTAINERS
Diffstat (limited to 'drivers/mmc/core/sdio.c')
-rw-r--r-- | drivers/mmc/core/sdio.c | 316 |
1 files changed, 225 insertions, 91 deletions
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index fb99ccff908..cdb845b68ab 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -165,6 +165,29 @@ static int sdio_enable_wide(struct mmc_card *card) } /* + * If desired, disconnect the pull-up resistor on CD/DAT[3] (pin 1) + * of the card. This may be required on certain setups of boards, + * controllers and embedded sdio device which do not need the card's + * pull-up. As a result, card detection is disabled and power is saved. + */ +static int sdio_disable_cd(struct mmc_card *card) +{ + int ret; + u8 ctrl; + + if (!card->cccr.disable_cd) + return 0; + + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl); + if (ret) + return ret; + + ctrl |= SDIO_BUS_CD_DISABLE; + + return mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL); +} + +/* * Test if the card supports high-speed mode and, if so, switch to it. */ static int sdio_enable_hs(struct mmc_card *card) @@ -195,6 +218,135 @@ static int sdio_enable_hs(struct mmc_card *card) } /* + * Handle the detection and initialisation of a card. + * + * In the case of a resume, "oldcard" will contain the card + * we're trying to reinitialise. + */ +static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, + struct mmc_card *oldcard) +{ + struct mmc_card *card; + int err; + + BUG_ON(!host); + WARN_ON(!host->claimed); + + /* + * Inform the card of the voltage + */ + err = mmc_send_io_op_cond(host, host->ocr, &ocr); + if (err) + goto err; + + /* + * For SPI, enable CRC as appropriate. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_set_crc(host, use_spi_crc); + if (err) + goto err; + } + + /* + * Allocate card structure. + */ + card = mmc_alloc_card(host, NULL); + if (IS_ERR(card)) { + err = PTR_ERR(card); + goto err; + } + + card->type = MMC_TYPE_SDIO; + + /* + * For native busses: set card RCA and quit open drain mode. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_send_relative_addr(host, &card->rca); + if (err) + goto remove; + + mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); + } + + /* + * Select card, as all following commands rely on that. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_select_card(card); + if (err) + goto remove; + } + + /* + * Read the common registers. + */ + err = sdio_read_cccr(card); + if (err) + goto remove; + + /* + * Read the common CIS tuples. + */ + err = sdio_read_common_cis(card); + if (err) + goto remove; + + if (oldcard) { + int same = (card->cis.vendor == oldcard->cis.vendor && + card->cis.device == oldcard->cis.device); + mmc_remove_card(card); + if (!same) { + err = -ENOENT; + goto err; + } + card = oldcard; + return 0; + } + + /* + * Switch to high-speed (if supported). + */ + err = sdio_enable_hs(card); + if (err) + goto remove; + + /* + * Change to the card's maximum speed. + */ + if (mmc_card_highspeed(card)) { + /* + * The SDIO specification doesn't mention how + * the CIS transfer speed register relates to + * high-speed, but it seems that 50 MHz is + * mandatory. + */ + mmc_set_clock(host, 50000000); + } else { + mmc_set_clock(host, card->cis.max_dtr); + } + + /* + * Switch to wider bus (if supported). + */ + err = sdio_enable_wide(card); + if (err) + goto remove; + + if (!oldcard) + host->card = card; + return 0; + +remove: + if (!oldcard) + mmc_remove_card(card); + +err: + return err; +} + +/* * Host is being removed. Free up the current card. */ static void mmc_sdio_remove(struct mmc_host *host) @@ -243,10 +395,77 @@ static void mmc_sdio_detect(struct mmc_host *host) } } +/* + * SDIO suspend. We need to suspend all functions separately. + * Therefore all registered functions must have drivers with suspend + * and resume methods. Failing that we simply remove the whole card. + */ +static int mmc_sdio_suspend(struct mmc_host *host) +{ + int i, err = 0; + + for (i = 0; i < host->card->sdio_funcs; i++) { + struct sdio_func *func = host->card->sdio_func[i]; + if (func && sdio_func_present(func) && func->dev.driver) { + const struct dev_pm_ops *pmops = func->dev.driver->pm; + if (!pmops || !pmops->suspend || !pmops->resume) { + /* force removal of entire card in that case */ + err = -ENOSYS; + } else + err = pmops->suspend(&func->dev); + if (err) + break; + } + } + while (err && --i >= 0) { + struct sdio_func *func = host->card->sdio_func[i]; + if (func && sdio_func_present(func) && func->dev.driver) { + const struct dev_pm_ops *pmops = func->dev.driver->pm; + pmops->resume(&func->dev); + } + } + + return err; +} + +static int mmc_sdio_resume(struct mmc_host *host) +{ + int i, err; + + BUG_ON(!host); + BUG_ON(!host->card); + + /* Basic card reinitialization. */ + mmc_claim_host(host); + err = mmc_sdio_init_card(host, host->ocr, host->card); + mmc_release_host(host); + + /* + * If the card looked to be the same as before suspending, then + * we proceed to resume all card functions. If one of them returns + * an error then we simply return that error to the core and the + * card will be redetected as new. It is the responsibility of + * the function driver to perform further tests with the extra + * knowledge it has of the card to confirm the card is indeed the + * same as before suspending (same MAC address for network cards, + * etc.) and return an error otherwise. + */ + for (i = 0; !err && i < host->card->sdio_funcs; i++) { + struct sdio_func *func = host->card->sdio_func[i]; + if (func && sdio_func_present(func) && func->dev.driver) { + const struct dev_pm_ops *pmops = func->dev.driver->pm; + err = pmops->resume(&func->dev); + } + } + + return err; +} static const struct mmc_bus_ops mmc_sdio_ops = { .remove = mmc_sdio_remove, .detect = mmc_sdio_detect, + .suspend = mmc_sdio_suspend, + .resume = mmc_sdio_resume, }; @@ -275,13 +494,6 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) ocr &= ~0x7F; } - if (ocr & MMC_VDD_165_195) { - printk(KERN_WARNING "%s: SDIO card claims to support the " - "incompletely defined 'low voltage range'. This " - "will be ignored.\n", mmc_hostname(host)); - ocr &= ~MMC_VDD_165_195; - } - host->ocr = mmc_select_voltage(host, ocr); /* @@ -293,101 +505,23 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) } /* - * Inform the card of the voltage + * Detect and init the card. */ - err = mmc_send_io_op_cond(host, host->ocr, &ocr); + err = mmc_sdio_init_card(host, host->ocr, NULL); if (err) goto err; - - /* - * For SPI, enable CRC as appropriate. - */ - if (mmc_host_is_spi(host)) { - err = mmc_spi_set_crc(host, use_spi_crc); - if (err) - goto err; - } + card = host->card; /* * The number of functions on the card is encoded inside * the ocr. */ - funcs = (ocr & 0x70000000) >> 28; - - /* - * Allocate card structure. - */ - card = mmc_alloc_card(host, NULL); - if (IS_ERR(card)) { - err = PTR_ERR(card); - goto err; - } - - card->type = MMC_TYPE_SDIO; - card->sdio_funcs = funcs; - - host->card = card; - - /* - * For native busses: set card RCA and quit open drain mode. - */ - if (!mmc_host_is_spi(host)) { - err = mmc_send_relative_addr(host, &card->rca); - if (err) - goto remove; - - mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); - } - - /* - * Select card, as all following commands rely on that. - */ - if (!mmc_host_is_spi(host)) { - err = mmc_select_card(card); - if (err) - goto remove; - } + card->sdio_funcs = funcs = (ocr & 0x70000000) >> 28; /* - * Read the common registers. + * If needed, disconnect card detection pull-up resistor. */ - err = sdio_read_cccr(card); - if (err) - goto remove; - - /* - * Read the common CIS tuples. - */ - err = sdio_read_common_cis(card); - if (err) - goto remove; - - /* - * Switch to high-speed (if supported). - */ - err = sdio_enable_hs(card); - if (err) - goto remove; - - /* - * Change to the card's maximum speed. - */ - if (mmc_card_highspeed(card)) { - /* - * The SDIO specification doesn't mention how - * the CIS transfer speed register relates to - * high-speed, but it seems that 50 MHz is - * mandatory. - */ - mmc_set_clock(host, 50000000); - } else { - mmc_set_clock(host, card->cis.max_dtr); - } - - /* - * Switch to wider bus (if supported). - */ - err = sdio_enable_wide(card); + err = sdio_disable_cd(card); if (err) goto remove; |