Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (84 commits)
  [JFFS2] debug.h: include <linux/sched.h> for current->pid
  [MTD] OneNAND: Handle DDP chip boundary during read-while-load
  [MTD] OneNAND: return ecc error code only when 2-bit ecc occurs
  [MTD] OneNAND: Implement read-while-load
  [MTD] OneNAND: fix onenand_wait bug in read ecc error
  [MTD] OneNAND: release CPU in cycles
  [MTD] OneNAND: add subpage write support
  [MTD] OneNAND: fix onenand_wait bug
  [JFFS2] use the ref_offset macro
  [JFFS2] Reschedule in loops
  [JFFS2] Fix error-path leak in summary scan
  [JFFS2] add cond_resched() when garbage collecting deletion dirent
  [MTD] Nuke IVR leftovers
  [MTD] OneNAND: fix oob handling in recent oob patch
  [MTD] Fix ssfdc blksize typo
  [JFFS2] replace kmalloc+memset with kzalloc
  [MTD] Fix SSFDC build for variable blocksize.
  [MTD] ESB2ROM uses PCI
  [MTD] of_device-based physmap driver
  [MTD] Support combined RedBoot FIS directory and configuration area
  ...

1 files changed, 27 insertions, 44 deletions

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index d132ed571f1..f457315579d 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -60,6 +60,15 @@ config MTD_PHYSMAP_BANKWIDTH
 	  Ignore this option if you use run-time physmap configuration
 	  (i.e., run-time calling physmap_configure()).
 
+config MTD_PHYSMAP_OF
+	tristate "Flash device in physical memory map based on OF descirption"
+	depends on PPC_OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
+	help
+	  This provides a 'mapping' driver which allows the NOR Flash and
+	  ROM driver code to communicate with chips which are mapped
+	  physically into the CPU's memory. The mapping description here is
+	  taken from OF device tree.
+
 config MTD_SUN_UFLASH
 	tristate "Sun Microsystems userflash support"
 	depends on SPARC && MTD_CFI
@@ -184,6 +193,24 @@ config MTD_ICHXROM
 
 	  BE VERY CAREFUL.
 
+config MTD_ESB2ROM
+        tristate "BIOS flash chip on Intel ESB Controller Hub 2"
+        depends on X86 && MTD_JEDECPROBE && PCI
+        help
+          Support for treating the BIOS flash chip on ESB2 motherboards
+          as an MTD device - with this you can reprogram your BIOS.
+
+          BE VERY CAREFUL.
+
+config MTD_CK804XROM
+	tristate "BIOS flash chip on Nvidia CK804"
+	depends on X86 && MTD_JEDECPROBE
+	help
+	  Support for treating the BIOS flash chip on nvidia motherboards
+	  as an MTD device - with this you can reprogram your BIOS.
+
+	  BE VERY CAREFUL.
+
 config MTD_SCB2_FLASH
 	tristate "BIOS flash chip on Intel SCB2 boards"
 	depends on X86 && MTD_JEDECPROBE
@@ -355,50 +382,6 @@ config MTD_TQM834x
 	  TQ Components TQM834x boards. If you have one of these boards
 	  and would like to use the flash chips on it, say 'Y'.
 
-config MTD_CSTM_MIPS_IXX
-	tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
-	depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
-	help
-	  This provides a mapping driver for the Integrated Technology
-	  Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR
-	  Reference Board. It provides the necessary addressing, length,
-	  buswidth, vpp code and addition setup of the flash device for
-	  these boards. In addition, this mapping driver can be used for
-	  other boards via setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/
-	  LEN/BUSWIDTH parameters. This mapping will provide one mtd device
-	  using one partition. The start address can be offset from the
-	  beginning of flash and the len can be less than the total flash
-	  device size to allow a window into the flash. Both CFI and JEDEC
-	  probes are called.
-
-config MTD_CSTM_MIPS_IXX_START
-	hex "Physical start address of flash mapping"
-	depends on MTD_CSTM_MIPS_IXX
-	default "0x8000000"
-	help
-	  This is the physical memory location that the MTD driver will
-	  use for the flash chips on your particular target board.
-	  Refer to the memory map which should hopefully be in the
-	  documentation for your board.
-
-config MTD_CSTM_MIPS_IXX_LEN
-	hex "Physical length of flash mapping"
-	depends on MTD_CSTM_MIPS_IXX
-	default "0x4000000"
-	help
-	  This is the total length that the MTD driver will use for the
-	  flash chips on your particular board.  Refer to the memory
-	  map which should hopefully be in the documentation for your
-	  board.
-
-config MTD_CSTM_MIPS_IXX_BUSWIDTH
-	int "Bus width in octets"
-	depends on MTD_CSTM_MIPS_IXX
-	default "2"
-	help
-	  This is the total bus width of the mapping of the flash chips
-	  on your particular board.
-
 config MTD_OCELOT
 	tristate "Momenco Ocelot boot flash device"
 	depends on MIPS && MOMENCO_OCELOT