MERGE-via-pending-tracking-hist-MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141

pending-tracking-hist top was MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141 / fdf777a63bcb59e0dfd78bfe2c6242e01f6d4eb9 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040

stable-tracking-hist top was MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040 / 90463bfd2d5a3c8b52f6e6d71024a00e052b0ced ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-mokopatches-tracking-hist-fix-stray-endmenu-patch

mokopatches-tracking-hist top was fix-stray-endmenu-patch / 3630e0be570de8057e7f8d2fe501ed353cdf34e6 ... parent commitmessage:
From: Andy Green <andy@openmoko.com>
fix-stray-endmenu.patch

Signed-off-by: Andy Green <andy@openmoko.com>

11 files changed, 2004 insertions, 201 deletions

diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 8eda6eeb43b..2895db13bfa 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -40,6 +40,14 @@ config ARM_AT91_ETHER
 	  If you wish to compile a kernel for the AT91RM9200 and enable
 	  ethernet support, then you should always answer Y to this.
 
+config ARM_KS8695_ETHER
+	tristate "KS8695 Ethernet support"
+	depends on ARM && ARCH_KS8695
+	select MII
+	help
+	  If you wish to compile a kernel for the KS8695 and want to
+	  use the internal ethernet then you should answer Y to this.
+
 config EP93XX_ETH
 	tristate "EP93xx Ethernet support"
 	depends on ARM && ARCH_EP93XX
@@ -51,7 +59,7 @@ config EP93XX_ETH
 config IXP4XX_ETH
 	tristate "Intel IXP4xx Ethernet support"
 	depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
-	select MII
+	select PHYLIB
 	help
 	  Say Y here if you want to use built-in Ethernet ports
 	  on IXP4xx processor.
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index 7c812ac2b6a..c69c0cdba4a 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -4,9 +4,10 @@
 #
 
 obj-$(CONFIG_ARM_AM79C961A)	+= am79c961a.o
-obj-$(CONFIG_ARM_ETHERH)	+= etherh.o
+obj-$(CONFIG_ARM_ETHERH)	+= etherh.o ../8390.o
 obj-$(CONFIG_ARM_ETHER3)	+= ether3.o
 obj-$(CONFIG_ARM_ETHER1)	+= ether1.o
 obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
+obj-$(CONFIG_ARM_KS8695_ETHER)	+= ks8695net.o
 obj-$(CONFIG_EP93XX_ETH)	+= ep93xx_eth.o
 obj-$(CONFIG_IXP4XX_ETH)	+= ixp4xx_eth.o
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index aa4a5246be5..0c628a9e533 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -532,7 +532,6 @@ am79c961_rx(struct net_device *dev, struct dev_priv *priv)
 			am_writeword(dev, hdraddr + 2, RMD_OWN);
 			skb->protocol = eth_type_trans(skb, dev);
 			netif_rx(skb);
-			dev->last_rx = jiffies;
 			priv->stats.rx_bytes += len;
 			priv->stats.rx_packets ++;
 		} else {
@@ -745,10 +744,8 @@ static int __init am79c961_probe(struct platform_device *pdev)
 
 	ret = register_netdev(dev);
 	if (ret == 0) {
-		DECLARE_MAC_BUF(mac);
-
-		printk(KERN_INFO "%s: ether address %s\n",
-		       dev->name, print_mac(mac, dev->dev_addr));
+		printk(KERN_INFO "%s: ether address %pM\n",
+		       dev->name, dev->dev_addr);
 		return 0;
 	}
 
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 6f431a887e7..442938d5038 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -485,7 +485,6 @@ static void update_mac_address(struct net_device *dev)
 static int set_mac_address(struct net_device *dev, void* addr)
 {
 	struct sockaddr *address = addr;
-	DECLARE_MAC_BUF(mac);
 
 	if (!is_valid_ether_addr(address->sa_data))
 		return -EADDRNOTAVAIL;
@@ -493,8 +492,8 @@ static int set_mac_address(struct net_device *dev, void* addr)
 	memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
 	update_mac_address(dev);
 
-	printk("%s: Setting MAC address to %s\n", dev->name,
-	       print_mac(mac, dev->dev_addr));
+	printk("%s: Setting MAC address to %pM\n", dev->name,
+	       dev->dev_addr);
 
 	return 0;
 }
@@ -894,7 +893,6 @@ static void at91ether_rx(struct net_device *dev)
 			memcpy(skb_put(skb, pktlen), p_recv, pktlen);
 
 			skb->protocol = eth_type_trans(skb, dev);
-			dev->last_rx = jiffies;
 			dev->stats.rx_bytes += pktlen;
 			netif_rx(skb);
 		}
@@ -978,7 +976,6 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
 	struct at91_private *lp;
 	unsigned int val;
 	int res;
-	DECLARE_MAC_BUF(mac);
 
 	dev = alloc_etherdev(sizeof(struct at91_private));
 	if (!dev)
@@ -1084,11 +1081,11 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
 		gpio_request(lp->board_data.phy_irq_pin, "ethernet_phy");
 
 	/* Display ethernet banner */
-	printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%s)\n",
+	printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%pM)\n",
 	       dev->name, (uint) dev->base_addr, dev->irq,
 	       at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_SPD ? "100-" : "10-",
 	       at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_FD ? "FullDuplex" : "HalfDuplex",
-	       print_mac(mac, dev->dev_addr));
+	       dev->dev_addr);
 	if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID))
 		printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)");
 	else if (phy_type == MII_LXT971A_ID)
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 1267444d79d..3ec20cc18b0 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -259,8 +259,6 @@ static int ep93xx_rx(struct net_device *dev, int processed, int budget)
 			skb_put(skb, length);
 			skb->protocol = eth_type_trans(skb, dev);
 
-			dev->last_rx = jiffies;
-
 			netif_receive_skb(skb);
 
 			ep->stats.rx_packets++;
@@ -300,7 +298,7 @@ poll_some_more:
 		int more = 0;
 
 		spin_lock_irq(&ep->rx_lock);
-		__netif_rx_complete(dev, napi);
+		__netif_rx_complete(napi);
 		wrl(ep, REG_INTEN, REG_INTEN_TX | REG_INTEN_RX);
 		if (ep93xx_have_more_rx(ep)) {
 			wrl(ep, REG_INTEN, REG_INTEN_TX);
@@ -309,7 +307,7 @@ poll_some_more:
 		}
 		spin_unlock_irq(&ep->rx_lock);
 
-		if (more && netif_rx_reschedule(dev, napi))
+		if (more && netif_rx_reschedule(napi))
 			goto poll_some_more;
 	}
 
@@ -417,9 +415,9 @@ static irqreturn_t ep93xx_irq(int irq, void *dev_id)
 
 	if (status & REG_INTSTS_RX) {
 		spin_lock(&ep->rx_lock);
-		if (likely(netif_rx_schedule_prep(dev, &ep->napi))) {
+		if (likely(netif_rx_schedule_prep(&ep->napi))) {
 			wrl(ep, REG_INTEN, REG_INTEN_TX);
-			__netif_rx_schedule(dev, &ep->napi);
+			__netif_rx_schedule(&ep->napi);
 		}
 		spin_unlock(&ep->rx_lock);
 	}
diff --git a/drivers/net/arm/ether1.c b/drivers/net/arm/ether1.c
index 3bb9e293e2e..e380de45446 100644
--- a/drivers/net/arm/ether1.c
+++ b/drivers/net/arm/ether1.c
@@ -996,7 +996,6 @@ ether1_probe(struct expansion_card *ec, const struct ecard_id *id)
 {
 	struct net_device *dev;
 	int i, ret = 0;
-	DECLARE_MAC_BUF(mac);
 
 	ether1_banner();
 
@@ -1044,8 +1043,8 @@ ether1_probe(struct expansion_card *ec, const struct ecard_id *id)
 	if (ret)
 		goto free;
 
-	printk(KERN_INFO "%s: ether1 in slot %d, %s\n",
-		dev->name, ec->slot_no, print_mac(mac, dev->dev_addr));
+	printk(KERN_INFO "%s: ether1 in slot %d, %pM\n",
+		dev->name, ec->slot_no, dev->dev_addr);
     
 	ecard_set_drvdata(ec, dev);
 	return 0;
diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c
index 67e96ae8503..21a7bef12d3 100644
--- a/drivers/net/arm/ether3.c
+++ b/drivers/net/arm/ether3.c
@@ -776,7 +776,6 @@ ether3_probe(struct expansion_card *ec, const struct ecard_id *id)
 	const struct ether3_data *data = id->data;
 	struct net_device *dev;
 	int bus_type, ret;
-	DECLARE_MAC_BUF(mac);
 
 	ether3_banner();
 
@@ -859,8 +858,8 @@ ether3_probe(struct expansion_card *ec, const struct ecard_id *id)
 	if (ret)
 		goto free;
 
-	printk("%s: %s in slot %d, %s\n",
-	       dev->name, data->name, ec->slot_no, print_mac(mac, dev->dev_addr));
+	printk("%s: %s in slot %d, %pM\n",
+	       dev->name, data->name, ec->slot_no, dev->dev_addr);
 
 	ecard_set_drvdata(ec, dev);
 	return 0;
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 5c5f1e470d3..d15d8b79d8e 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -637,6 +637,22 @@ static const struct ethtool_ops etherh_ethtool_ops = {
 	.get_drvinfo	= etherh_get_drvinfo,
 };
 
+static const struct net_device_ops etherh_netdev_ops = {
+	.ndo_open		= etherh_open,
+	.ndo_stop		= etherh_close,
+	.ndo_set_config		= etherh_set_config,
+	.ndo_start_xmit		= ei_start_xmit,
+	.ndo_tx_timeout		= ei_tx_timeout,
+	.ndo_get_stats		= ei_get_stats,
+	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_set_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= ei_poll,
+#endif
+};
+
 static u32 etherh_regoffsets[16];
 static u32 etherm_regoffsets[16];
 
@@ -648,7 +664,6 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
 	struct net_device *dev;
 	struct etherh_priv *eh;
 	int ret;
-	DECLARE_MAC_BUF(mac);
 
 	etherh_banner();
 
@@ -664,9 +679,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
 
 	SET_NETDEV_DEV(dev, &ec->dev);
 
-	dev->open		= etherh_open;
-	dev->stop		= etherh_close;
-	dev->set_config		= etherh_set_config;
+	dev->netdev_ops		= &etherh_netdev_ops;
 	dev->irq		= ec->irq;
 	dev->ethtool_ops	= &etherh_ethtool_ops;
 
@@ -746,8 +759,8 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
 	if (ret)
 		goto free;
 
-	printk(KERN_INFO "%s: %s in slot %d, %s\n",
-		dev->name, data->name, ec->slot_no, print_mac(mac, dev->dev_addr));
+	printk(KERN_INFO "%s: %s in slot %d, %pM\n",
+		dev->name, data->name, ec->slot_no, dev->dev_addr);
 
 	ecard_set_drvdata(ec, dev);
 
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index e2d702b8b2e..5fce1d5c1a1 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -30,12 +30,11 @@
 #include <linux/etherdevice.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/mii.h>
+#include <linux/phy.h>
 #include <linux/platform_device.h>
 #include <mach/npe.h>
 #include <mach/qmgr.h>
 
-#define DEBUG_QUEUES		0
 #define DEBUG_DESC		0
 #define DEBUG_RX		0
 #define DEBUG_TX		0
@@ -59,7 +58,6 @@
 #define NAPI_WEIGHT		16
 #define MDIO_INTERVAL		(3 * HZ)
 #define MAX_MDIO_RETRIES	100 /* microseconds, typically 30 cycles */
-#define MAX_MII_RESET_RETRIES	100 /* mdio_read() cycles, typically 4 */
 #define MAX_CLOSE_WAIT		1000 /* microseconds, typically 2-3 cycles */
 
 #define NPE_ID(port_id)		((port_id) >> 4)
@@ -164,15 +162,14 @@ struct port {
 	struct npe *npe;
 	struct net_device *netdev;
 	struct napi_struct napi;
-	struct net_device_stats stat;
-	struct mii_if_info mii;
-	struct delayed_work mdio_thread;
+	struct phy_device *phydev;
 	struct eth_plat_info *plat;
 	buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
 	struct desc *desc_tab;	/* coherent */
 	u32 desc_tab_phys;
 	int id;			/* logical port ID */
-	u16 mii_bmcr;
+	int speed, duplex;
+	u8 firmware[4];
 };
 
 /* NPE message structure */
@@ -243,19 +240,20 @@ static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
 
 static spinlock_t mdio_lock;
 static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */
+struct mii_bus *mdio_bus;
 static int ports_open;
 static struct port *npe_port_tab[MAX_NPES];
 static struct dma_pool *dma_pool;
 
 
-static u16 mdio_cmd(struct net_device *dev, int phy_id, int location,
-		    int write, u16 cmd)
+static int ixp4xx_mdio_cmd(struct mii_bus *bus, int phy_id, int location,
+			   int write, u16 cmd)
 {
 	int cycles = 0;
 
 	if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) {
-		printk(KERN_ERR "%s: MII not ready to transmit\n", dev->name);
-		return 0;
+		printk(KERN_ERR "%s: MII not ready to transmit\n", bus->name);
+		return -1;
 	}
 
 	if (write) {
@@ -274,107 +272,119 @@ static u16 mdio_cmd(struct net_device *dev, int phy_id, int location,
 	}
 
 	if (cycles == MAX_MDIO_RETRIES) {
-		printk(KERN_ERR "%s: MII write failed\n", dev->name);
-		return 0;
+		printk(KERN_ERR "%s #%i: MII write failed\n", bus->name,
+		       phy_id);
+		return -1;
 	}
 
 #if DEBUG_MDIO
-	printk(KERN_DEBUG "%s: mdio_cmd() took %i cycles\n", dev->name,
-	       cycles);
+	printk(KERN_DEBUG "%s #%i: mdio_%s() took %i cycles\n", bus->name,
+	       phy_id, write ? "write" : "read", cycles);
 #endif
 
 	if (write)
 		return 0;
 
 	if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) {
-		printk(KERN_ERR "%s: MII read failed\n", dev->name);
-		return 0;
+#if DEBUG_MDIO
+		printk(KERN_DEBUG "%s #%i: MII read failed\n", bus->name,
+		       phy_id);
+#endif
+		return 0xFFFF; /* don't return error */
 	}
 
 	return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) |
-		(__raw_readl(&mdio_regs->mdio_status[1]) << 8);
+		((__raw_readl(&mdio_regs->mdio_status[1]) & 0xFF) << 8);
 }
 
-static int mdio_read(struct net_device *dev, int phy_id, int location)
+static int ixp4xx_mdio_read(struct mii_bus *bus, int phy_id, int location)
 {
 	unsigned long flags;
-	u16 val;
+	int ret;
 
 	spin_lock_irqsave(&mdio_lock, flags);
-	val = mdio_cmd(dev, phy_id, location, 0, 0);
+	ret = ixp4xx_mdio_cmd(bus, phy_id, location, 0, 0);
 	spin_unlock_irqrestore(&mdio_lock, flags);
-	return val;
+#if DEBUG_MDIO
+	printk(KERN_DEBUG "%s #%i: MII read [%i] -> 0x%X\n", bus->name,
+	       phy_id, location, ret);
+#endif
+	return ret;
 }
 
-static void mdio_write(struct net_device *dev, int phy_id, int location,
-		       int val)
+static int ixp4xx_mdio_write(struct mii_bus *bus, int phy_id, int location,
+			     u16 val)
 {
 	unsigned long flags;
+	int ret;
 
 	spin_lock_irqsave(&mdio_lock, flags);
-	mdio_cmd(dev, phy_id, location, 1, val);
+	ret = ixp4xx_mdio_cmd(bus, phy_id, location, 1, val);
 	spin_unlock_irqrestore(&mdio_lock, flags);
+#if DEBUG_MDIO
+	printk(KERN_DEBUG "%s #%i: MII read [%i] <- 0x%X, err = %i\n",
+	       bus->name, phy_id, location, val, ret);
+#endif
+	return ret;
 }
 
-static void phy_reset(struct net_device *dev, int phy_id)
+static int ixp4xx_mdio_register(void)
 {
-	struct port *port = netdev_priv(dev);
-	int cycles = 0;
+	int err;
 
-	mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET);
+	if (!(mdio_bus = mdiobus_alloc()))
+		return -ENOMEM;
 
-	while (cycles < MAX_MII_RESET_RETRIES) {
-		if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
-#if DEBUG_MDIO
-			printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
-			       dev->name, cycles);
-#endif
-			return;
-		}
-		udelay(1);
-		cycles++;
-	}
+	/* All MII PHY accesses use NPE-B Ethernet registers */
+	spin_lock_init(&mdio_lock);
+	mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
+	__raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
+
+	mdio_bus->name = "IXP4xx MII Bus";
+	mdio_bus->read = &ixp4xx_mdio_read;
+	mdio_bus->write = &ixp4xx_mdio_write;
+	strcpy(mdio_bus->id, "0");
 
-	printk(KERN_ERR "%s: MII reset failed\n", dev->name);
+	if ((err = mdiobus_register(mdio_bus)))
+		mdiobus_free(mdio_bus);
+	return err;
 }
 
-static void eth_set_duplex(struct port *port)
+static void ixp4xx_mdio_remove(void)
 {
-	if (port->mii.full_duplex)
-		__raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
-			     &port->regs->tx_control[0]);
-	else
-		__raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
-			     &port->regs->tx_control[0]);
+	mdiobus_unregister(mdio_bus);
+	mdiobus_free(mdio_bus);
 }
 
 
-static void phy_check_media(struct port *port, int init)
+static void ixp4xx_adjust_link(struct net_device *dev)
 {
-	if (mii_check_media(&port->mii, 1, init))
-		eth_set_duplex(port);
-	if (port->mii.force_media) { /* mii_check_media() doesn't work */
-		struct net_device *dev = port->netdev;
-		int cur_link = mii_link_ok(&port->mii);
-		int prev_link = netif_carrier_ok(dev);
-
-		if (!prev_link && cur_link) {
-			printk(KERN_INFO "%s: link up\n", dev->name);
-			netif_carrier_on(dev);
-		} else if (prev_link && !cur_link) {
+	struct port *port = netdev_priv(dev);
+	struct phy_device *phydev = port->phydev;
+
+	if (!phydev->link) {
+		if (port->speed) {
+			port->speed = 0;
 			printk(KERN_INFO "%s: link down\n", dev->name);
-			netif_carrier_off(dev);
 		}
+		return;
 	}
-}
 
+	if (port->speed == phydev->speed && port->duplex == phydev->duplex)
+		return;
 
-static void mdio_thread(struct work_struct *work)
-{
-	struct port *port = container_of(work, struct port, mdio_thread.work);
+	port->speed = phydev->speed;
+	port->duplex = phydev->duplex;
+
+	if (port->duplex)
+		__raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
+			     &port->regs->tx_control[0]);
+	else
+		__raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
+			     &port->regs->tx_control[0]);
 
-	phy_check_media(port, 0);
-	schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
+	printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
+	       dev->name, port->speed, port->duplex ? "full" : "half");
 }
 
 
@@ -412,47 +422,13 @@ static inline void debug_desc(u32 phys, struct desc *desc)
 #endif
 }
 
-static inline void debug_queue(unsigned int queue, int is_get, u32 phys)
-{
-#if DEBUG_QUEUES
-	static struct {
-		int queue;
-		char *name;
-	} names[] = {
-		{ TX_QUEUE(0x10), "TX#0 " },
-		{ TX_QUEUE(0x20), "TX#1 " },
-		{ TX_QUEUE(0x00), "TX#2 " },
-		{ RXFREE_QUEUE(0x10), "RX-free#0 " },
-		{ RXFREE_QUEUE(0x20), "RX-free#1 " },
-		{ RXFREE_QUEUE(0x00), "RX-free#2 " },
-		{ TXDONE_QUEUE, "TX-done " },
-	};
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(names); i++)
-		if (names[i].queue == queue)
-			break;
-
-	printk(KERN_DEBUG "Queue %i %s%s %X\n", queue,
-	       i < ARRAY_SIZE(names) ? names[i].name : "",
-	       is_get ? "->" : "<-", phys);
-#endif
-}
-
-static inline u32 queue_get_entry(unsigned int queue)
-{
-	u32 phys = qmgr_get_entry(queue);
-	debug_queue(queue, 1, phys);
-	return phys;
-}
-
 static inline int queue_get_desc(unsigned int queue, struct port *port,
 				 int is_tx)
 {
 	u32 phys, tab_phys, n_desc;
 	struct desc *tab;
 
-	if (!(phys = queue_get_entry(queue)))
+	if (!(phys = qmgr_get_entry(queue)))
 		return -1;
 
 	phys &= ~0x1F; /* mask out non-address bits */
@@ -468,7 +444,6 @@ static inline int queue_get_desc(unsigned int queue, struct port *port,
 static inline void queue_put_desc(unsigned int queue, u32 phys,
 				  struct desc *desc)
 {
-	debug_queue(queue, 0, phys);
 	debug_desc(phys, desc);
 	BUG_ON(phys & 0x1F);
 	qmgr_put_entry(queue, phys);
@@ -498,7 +473,7 @@ static void eth_rx_irq(void *pdev)
 	printk(KERN_DEBUG "%s: eth_rx_irq\n", dev->name);
 #endif
 	qmgr_disable_irq(port->plat->rxq);
-	netif_rx_schedule(dev, &port->napi);
+	netif_rx_schedule(&port->napi);
 }
 
 static int eth_poll(struct napi_struct *napi, int budget)
@@ -526,10 +501,10 @@ static int eth_poll(struct napi_struct *napi, int budget)
 			printk(KERN_DEBUG "%s: eth_poll netif_rx_complete\n",
 			       dev->name);
 #endif
-			netif_rx_complete(dev, napi);
+			netif_rx_complete(napi);
 			qmgr_enable_irq(rxq);
 			if (!qmgr_stat_empty(rxq) &&
-			    netif_rx_reschedule(dev, napi)) {
+			    netif_rx_reschedule(napi)) {
 #if DEBUG_RX
 				printk(KERN_DEBUG "%s: eth_poll"
 				       " netif_rx_reschedule successed\n",
@@ -562,7 +537,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
 #endif
 
 		if (!skb) {
-			port->stat.rx_dropped++;
+			dev->stats.rx_dropped++;
 			/* put the desc back on RX-ready queue */
 			desc->buf_len = MAX_MRU;
 			desc->pkt_len = 0;
@@ -588,9 +563,8 @@ static int eth_poll(struct napi_struct *napi, int budget)
 		debug_pkt(dev, "eth_poll", skb->data, skb->len);
 
 		skb->protocol = eth_type_trans(skb, dev);
-		dev->last_rx = jiffies;
-		port->stat.rx_packets++;
-		port->stat.rx_bytes += skb->len;
+		dev->stats.rx_packets++;
+		dev->stats.rx_bytes += skb->len;
 		netif_receive_skb(skb);
 
 		/* put the new buffer on RX-free queue */
@@ -618,7 +592,7 @@ static void eth_txdone_irq(void *unused)
 #if DEBUG_TX
 	printk(KERN_DEBUG DRV_NAME ": eth_txdone_irq\n");
 #endif
-	while ((phys = queue_get_entry(TXDONE_QUEUE)) != 0) {
+	while ((phys = qmgr_get_entry(TXDONE_QUEUE)) != 0) {
 		u32 npe_id, n_desc;
 		struct port *port;
 		struct desc *desc;
@@ -635,8 +609,8 @@ static void eth_txdone_irq(void *unused)
 		debug_desc(phys, desc);
 
 		if (port->tx_buff_tab[n_desc]) { /* not the draining packet */
-			port->stat.tx_packets++;
-			port->stat.tx_bytes += desc->pkt_len;
+			port->netdev->stats.tx_packets++;
+			port->netdev->stats.tx_bytes += desc->pkt_len;
 
 			dma_unmap_tx(port, desc);
 #if DEBUG_TX
@@ -674,7 +648,7 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (unlikely(skb->len > MAX_MRU)) {
 		dev_kfree_skb(skb);
-		port->stat.tx_errors++;
+		dev->stats.tx_errors++;
 		return NETDEV_TX_OK;
 	}
 
@@ -690,7 +664,7 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	bytes = ALIGN(offset + len, 4);
 	if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
 		dev_kfree_skb(skb);
-		port->stat.tx_dropped++;
+		dev->stats.tx_dropped++;
 		return NETDEV_TX_OK;
 	}
 	memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
@@ -704,7 +678,7 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
 #else
 		kfree(mem);
 #endif
-		port->stat.tx_dropped++;
+		dev->stats.tx_dropped++;
 		return NETDEV_TX_OK;
 	}
 
@@ -747,12 +721,6 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
 }
 
 
-static struct net_device_stats *eth_stats(struct net_device *dev)
-{
-	struct port *port = netdev_priv(dev);
-	return &port->stat;
-}
-
 static void eth_set_mcast_list(struct net_device *dev)
 {
 	struct port *port = netdev_priv(dev);
@@ -786,41 +754,80 @@ static void eth_set_mcast_list(struct net_device *dev)
 static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
 {
 	struct port *port = netdev_priv(dev);
-	unsigned int duplex_chg;
-	int err;
 
 	if (!netif_running(dev))
 		return -EINVAL;
-	err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg);
-	if (duplex_chg)
-		eth_set_duplex(port);
-	return err;
+	return phy_mii_ioctl(port->phydev, if_mii(req), cmd);
+}
+
+/* ethtool support */
+
+static void ixp4xx_get_drvinfo(struct net_device *dev,
+			       struct ethtool_drvinfo *info)
+{
+	struct port *port = netdev_priv(dev);
+	strcpy(info->driver, DRV_NAME);
+	snprintf(info->fw_version, sizeof(info->fw_version), "%u:%u:%u:%u",
+		 port->firmware[0], port->firmware[1],
+		 port->firmware[2], port->firmware[3]);
+	strcpy(info->bus_info, "internal");
 }
 
+static int ixp4xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct port *port = netdev_priv(dev);
+	return phy_ethtool_gset(port->phydev, cmd);
+}
+
+static int ixp4xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct port *port = netdev_priv(dev);
+	return phy_ethtool_sset(port->phydev, cmd);
+}
+
+static int ixp4xx_nway_reset(struct net_device *dev)
+{
+	struct port *port = netdev_priv(dev);
+	return phy_start_aneg(port->phydev);
+}
+
+static struct ethtool_ops ixp4xx_ethtool_ops = {
+	.get_drvinfo = ixp4xx_get_drvinfo,
+	.get_settings = ixp4xx_get_settings,
+	.set_settings = ixp4xx_set_settings,
+	.nway_reset = ixp4xx_nway_reset,
+	.get_link = ethtool_op_get_link,
+};
+
 
 static int request_queues(struct port *port)
 {
 	int err;
 
-	err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0);
+	err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0,
+			    "%s:RX-free", port->netdev->name);
 	if (err)
 		return err;
 
-	err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0);
+	err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0,
+			    "%s:RX", port->netdev->name);
 	if (err)
 		goto rel_rxfree;
 
-	err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0);
+	err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0,
+			    "%s:TX", port->netdev->name);
 	if (err)
 		goto rel_rx;
 
-	err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0);
+	err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0,
+			    "%s:TX-ready", port->netdev->name);
 	if (err)
 		goto rel_tx;
 
 	/* TX-done queue handles skbs sent out by the NPEs */
 	if (!ports_open) {
-		err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0);
+		err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0,
+				    "%s:TX-done", DRV_NAME);
 		if (err)
 			goto rel_txready;
 	}
@@ -944,10 +951,12 @@ static int eth_open(struct net_device *dev)
 			       npe_name(npe));
 			return -EIO;
 		}
+		port->firmware[0] = msg.byte4;
+		port->firmware[1] = msg.byte5;
+		port->firmware[2] = msg.byte6;
+		port->firmware[3] = msg.byte7;
 	}
 
-	mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr);
-
 	memset(&msg, 0, sizeof(msg));
 	msg.cmd = NPE_VLAN_SETRXQOSENTRY;
 	msg.eth_id = port->id;
@@ -985,6 +994,9 @@ static int eth_open(struct net_device *dev)
 		return err;
 	}
 
+	port->speed = 0;	/* force "link up" message */
+	phy_start(port->phydev);
+
 	for (i = 0; i < ETH_ALEN; i++)
 		__raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
 	__raw_writel(0x08, &port->regs->random_seed);
@@ -1012,10 +1024,8 @@ static int eth_open(struct net_device *dev)
 	__raw_writel(DEFAULT_RX_CNTRL0, &port->regs->rx_control[0]);
 
 	napi_enable(&port->napi);
-	phy_check_media(port, 1);
 	eth_set_mcast_list(dev);
 	netif_start_queue(dev);
-	schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
 
 	qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY,
 		     eth_rx_irq, dev);
@@ -1026,7 +1036,7 @@ static int eth_open(struct net_device *dev)
 	}
 	ports_open++;
 	/* we may already have RX data, enables IRQ */
-	netif_rx_schedule(dev, &port->napi);
+	netif_rx_schedule(&port->napi);
 	return 0;
 }
 
@@ -1106,25 +1116,31 @@ static int eth_close(struct net_device *dev)
 		printk(KERN_CRIT "%s: unable to disable loopback\n",
 		       dev->name);
 
-	port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) &
-		~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */
-	mdio_write(dev, port->plat->phy, MII_BMCR,
-		   port->mii_bmcr | BMCR_PDOWN);
+	phy_stop(port->phydev);
 
 	if (!ports_open)
 		qmgr_disable_irq(TXDONE_QUEUE);
-	cancel_rearming_delayed_work(&port->mdio_thread);
 	destroy_queues(port);
 	release_queues(port);
 	return 0;
 }
 
+static const struct net_device_ops ixp4xx_netdev_ops = {
+	.ndo_open = eth_open,
+	.ndo_stop = eth_close,
+	.ndo_start_xmit = eth_xmit,
+	.ndo_set_multicast_list = eth_set_mcast_list,
+	.ndo_do_ioctl = eth_ioctl,
+
+};
+
 static int __devinit eth_init_one(struct platform_device *pdev)
 {
 	struct port *port;
 	struct net_device *dev;
 	struct eth_plat_info *plat = pdev->dev.platform_data;
 	u32 regs_phys;
+	char phy_id[BUS_ID_SIZE];
 	int err;
 
 	if (!(dev = alloc_etherdev(sizeof(struct port))))
@@ -1153,12 +1169,8 @@ static int __devinit eth_init_one(struct platform_device *pdev)
 		goto err_free;
 	}
 
-	dev->open = eth_open;
-	dev->hard_start_xmit = eth_xmit;
-	dev->stop = eth_close;
-	dev->get_stats = eth_stats;
-	dev->do_ioctl = eth_ioctl;
-	dev->set_multicast_list = eth_set_mcast_list;
+	dev->netdev_ops = &ixp4xx_netdev_ops;
+	dev->ethtool_ops = &ixp4xx_ethtool_ops;
 	dev->tx_queue_len = 100;
 
 	netif_napi_add(dev, &port->napi, eth_poll, NAPI_WEIGHT);
@@ -1191,22 +1203,19 @@ static int __devinit eth_init_one(struct platform_device *pdev)
 	__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
 	udelay(50);
 
-	port->mii.dev = dev;
-	port->mii.mdio_read = mdio_read;
-	port->mii.mdio_write = mdio_write;
-	port->mii.phy_id = plat->phy;
-	port->mii.phy_id_mask = 0x1F;
-	port->mii.reg_num_mask = 0x1F;
+	snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, "0", plat->phy);
+	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
+				   PHY_INTERFACE_MODE_MII);
+	if (IS_ERR(port->phydev)) {
+		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+		return PTR_ERR(port->phydev);
+	}
+
+	port->phydev->irq = PHY_POLL;
 
 	printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
 	       npe_name(port->npe));
 
-	phy_reset(dev, plat->phy);
-	port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) &
-		~(BMCR_RESET | BMCR_PDOWN);
-	mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN);
-
-	INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
 	return 0;
 
 err_unreg:
@@ -1232,7 +1241,7 @@ static int __devexit eth_remove_one(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_driver drv = {
+static struct platform_driver ixp4xx_eth_driver = {
 	.driver.name	= DRV_NAME,
 	.probe		= eth_init_one,
 	.remove		= eth_remove_one,
@@ -1240,20 +1249,19 @@ static struct platform_driver drv = {
 
 static int __init eth_init_module(void)
 {
+	int err;
 	if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
 		return -ENOSYS;
 
-	/* All MII PHY accesses use NPE-B Ethernet registers */
-	spin_lock_init(&mdio_lock);
-	mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
-	__raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
-
-	return platform_driver_register(&drv);
+	if ((err = ixp4xx_mdio_register()))
+		return err;
+	return platform_driver_register(&ixp4xx_eth_driver);
 }
 
 static void __exit eth_cleanup_module(void)
 {
-	platform_driver_unregister(&drv);
+	platform_driver_unregister(&ixp4xx_eth_driver);
+	ixp4xx_mdio_remove();
 }
 
 MODULE_AUTHOR("Krzysztof Halasa");
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
new file mode 100644
index 00000000000..1cf2f949c0b
--- /dev/null
+++ b/drivers/net/arm/ks8695net.c
@@ -0,0 +1,1676 @@
+/*
+ * Micrel KS8695 (Centaur) Ethernet.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU
+ * General Public License for more details.
+ *
+ * Copyright 2008 Simtec Electronics
+ *		  Daniel Silverstone <dsilvers@simtec.co.uk>
+ *		  Vincent Sanders <vince@simtec.co.uk>
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+
+#include <mach/regs-switch.h>
+#include <mach/regs-misc.h>
+
+#include "ks8695net.h"
+
+#define MODULENAME	"ks8695_ether"
+#define MODULEVERSION	"1.01"
+
+/*
+ * Transmit and device reset timeout, default 5 seconds.
+ */
+static int watchdog = 5000;
+
+/* Hardware structures */
+
+/**
+ *	struct rx_ring_desc - Receive descriptor ring element
+ *	@status: The status of the descriptor element (E.g. who owns it)
+ *	@length: The number of bytes in the block pointed to by data_ptr
+ *	@data_ptr: The physical address of the data block to receive into
+ *	@next_desc: The physical address of the next descriptor element.
+ */
+struct rx_ring_desc {
+	__le32	status;
+	__le32	length;
+	__le32	data_ptr;
+	__le32	next_desc;
+};
+
+/**
+ *	struct tx_ring_desc - Transmit descriptor ring element
+ *	@owner: Who owns the descriptor
+ *	@status: The number of bytes in the block pointed to by data_ptr
+ *	@data_ptr: The physical address of the data block to receive into
+ *	@next_desc: The physical address of the next descriptor element.
+ */
+struct tx_ring_desc {
+	__le32	owner;
+	__le32	status;
+	__le32	data_ptr;
+	__le32	next_desc;
+};
+
+/**
+ *	struct ks8695_skbuff - sk_buff wrapper for rx/tx rings.
+ *	@skb: The buffer in the ring
+ *	@dma_ptr: The mapped DMA pointer of the buffer
+ *	@length: The number of bytes mapped to dma_ptr
+ */
+struct ks8695_skbuff {
+	struct sk_buff	*skb;
+	dma_addr_t	dma_ptr;
+	u32		length;
+};
+
+/* Private device structure */
+
+#define MAX_TX_DESC 8
+#define MAX_TX_DESC_MASK 0x7
+#define MAX_RX_DESC 16
+#define MAX_RX_DESC_MASK 0xf
+
+#define MAX_RXBUF_SIZE 0x700
+
+#define TX_RING_DMA_SIZE (sizeof(struct tx_ring_desc) * MAX_TX_DESC)
+#define RX_RING_DMA_SIZE (sizeof(struct rx_ring_desc) * MAX_RX_DESC)
+#define RING_DMA_SIZE (TX_RING_DMA_SIZE + RX_RING_DMA_SIZE)
+
+/**
+ *	enum ks8695_dtype - Device type
+ *	@KS8695_DTYPE_WAN: This device is a WAN interface
+ *	@KS8695_DTYPE_LAN: This device is a LAN interface
+ *	@KS8695_DTYPE_HPNA: This device is an HPNA interface
+ */
+enum ks8695_dtype {
+	KS8695_DTYPE_WAN,
+	KS8695_DTYPE_LAN,
+	KS8695_DTYPE_HPNA,
+};
+
+/**
+ *	struct ks8695_priv - Private data for the KS8695 Ethernet
+ *	@in_suspend: Flag to indicate if we're suspending/resuming
+ *	@ndev: The net_device for this interface
+ *	@dev: The platform device object for this interface
+ *	@dtype: The type of this device
+ *	@io_regs: The ioremapped registers for this interface
+ *	@rx_irq_name: The textual name of the RX IRQ from the platform data
+ *	@tx_irq_name: The textual name of the TX IRQ from the platform data
+ *	@link_irq_name: The textual name of the link IRQ from the
+ *			platform data if available
+ *	@rx_irq: The IRQ number for the RX IRQ
+ *	@tx_irq: The IRQ number for the TX IRQ
+ *	@link_irq: The IRQ number for the link IRQ if available
+ *	@regs_req: The resource request for the registers region
+ *	@phyiface_req: The resource request for the phy/switch region
+ *		       if available
+ *	@phyiface_regs: The ioremapped registers for the phy/switch if available
+ *	@ring_base: The base pointer of the dma coherent memory for the rings
+ *	@ring_base_dma: The DMA mapped equivalent of ring_base
+ *	@tx_ring: The pointer in ring_base of the TX ring
+ *	@tx_ring_used: The number of slots in the TX ring which are occupied
+ *	@tx_ring_next_slot: The next slot to fill in the TX ring
+ *	@tx_ring_dma: The DMA mapped equivalent of tx_ring
+ *	@tx_buffers: The sk_buff mappings for the TX ring
+ *	@txq_lock: A lock to protect the tx_buffers tx_ring_used etc variables
+ *	@rx_ring: The pointer in ring_base of the RX ring
+ *	@rx_ring_dma: The DMA mapped equivalent of rx_ring
+ *	@rx_buffers: The sk_buff mappings for the RX ring
+ *	@next_rx_desc_read: The next RX descriptor to read from on IRQ
+ *	@msg_enable: The flags for which messages to emit
+ */
+struct ks8695_priv {
+	int in_suspend;
+	struct net_device *ndev;
+	struct device *dev;
+	enum ks8695_dtype dtype;
+	void __iomem *io_regs;
+
+	const char *rx_irq_name, *tx_irq_name, *link_irq_name;
+	int rx_irq, tx_irq, link_irq;
+
+	struct resource *regs_req, *phyiface_req;
+	void __iomem *phyiface_regs;
+
+	void *ring_base;
+	dma_addr_t ring_base_dma;
+
+	struct tx_ring_desc *tx_ring;
+	int tx_ring_used;
+	int tx_ring_next_slot;
+	dma_addr_t tx_ring_dma;
+	struct ks8695_skbuff tx_buffers[MAX_TX_DESC];
+	spinlock_t txq_lock;
+
+	struct rx_ring_desc *rx_ring;
+	dma_addr_t rx_ring_dma;
+	struct ks8695_skbuff rx_buffers[MAX_RX_DESC];
+	int next_rx_desc_read;
+
+	int msg_enable;
+};
+
+/* Register access */
+
+/**
+ *	ks8695_readreg - Read from a KS8695 ethernet register
+ *	@ksp: The device to read from
+ *	@reg: The register to read
+ */
+static inline u32
+ks8695_readreg(struct ks8695_priv *ksp, int reg)
+{
+	return readl(ksp->io_regs + reg);
+}
+
+/**
+ *	ks8695_writereg - Write to a KS8695 ethernet register
+ *	@ksp: The device to write to
+ *	@reg: The register to write
+ *	@value: The value to write to the register
+ */
+static inline void
+ks8695_writereg(struct ks8695_priv *ksp, int reg, u32 value)
+{
+	writel(value, ksp->io_regs + reg);
+}
+
+/* Utility functions */
+
+/**
+ *	ks8695_port_type - Retrieve port-type as user-friendly string
+ *	@ksp: The device to return the type for
+ *
+ *	Returns a string indicating which of the WAN, LAN or HPNA
+ *	ports this device is likely to represent.
+ */
+static const char *
+ks8695_port_type(struct ks8695_priv *ksp)
+{
+	switch (ksp->dtype) {
+	case KS8695_DTYPE_LAN:
+		return "LAN";
+	case KS8695_DTYPE_WAN:
+		return "WAN";
+	case KS8695_DTYPE_HPNA:
+		return "HPNA";
+	}
+
+	return "UNKNOWN";
+}
+
+/**
+ *	ks8695_update_mac - Update the MAC registers in the device
+ *	@ksp: The device to update
+ *
+ *	Updates the MAC registers in the KS8695 device from the address in the
+ *	net_device structure associated with this interface.
+ */
+static void
+ks8695_update_mac(struct ks8695_priv *ksp)
+{
+	/* Update the HW with the MAC from the net_device */
+	struct net_device *ndev = ksp->ndev;
+	u32 machigh, maclow;
+
+	maclow	= ((ndev->dev_addr[2] << 24) | (ndev->dev_addr[3] << 16) |
+		   (ndev->dev_addr[4] <<  8) | (ndev->dev_addr[5] <<  0));
+	machigh = ((ndev->dev_addr[0] <<  8) | (ndev->dev_addr[1] <<  0));
+
+	ks8695_writereg(ksp, KS8695_MAL, maclow);
+	ks8695_writereg(ksp, KS8695_MAH, machigh);
+
+}
+
+/**
+ *	ks8695_refill_rxbuffers - Re-fill the RX buffer ring
+ *	@ksp: The device to refill
+ *
+ *	Iterates the RX ring of the device looking for empty slots.
+ *	For each empty slot, we allocate and map a new SKB and give it
+ *	to the hardware.
+ *	This can be called from interrupt context safely.
+ */
+static void
+ks8695_refill_rxbuffers(struct ks8695_priv *ksp)
+{
+	/* Run around the RX ring, filling in any missing sk_buff's */
+	int buff_n;
+
+	for (buff_n = 0; buff_n < MAX_RX_DESC; ++buff_n) {
+		if (!ksp->rx_buffers[buff_n].skb) {
+			struct sk_buff *skb = dev_alloc_skb(MAX_RXBUF_SIZE);
+			dma_addr_t mapping;
+
+			ksp->rx_buffers[buff_n].skb = skb;
+			if (skb == NULL) {
+				/* Failed to allocate one, perhaps
+				 * we'll try again later.
+				 */
+				break;
+			}
+
+			mapping = dma_map_single(ksp->dev, skb->data,
+						 MAX_RXBUF_SIZE,
+						 DMA_FROM_DEVICE);
+			if (unlikely(dma_mapping_error(ksp->dev, mapping))) {
+				/* Failed to DMA map this SKB, try later */
+				dev_kfree_skb_irq(skb);
+				ksp->rx_buffers[buff_n].skb = NULL;
+				break;
+			}
+			ksp->rx_buffers[buff_n].dma_ptr = mapping;
+			skb->dev = ksp->ndev;
+			ksp->rx_buffers[buff_n].length = MAX_RXBUF_SIZE;
+
+			/* Record this into the DMA ring */
+			ksp->rx_ring[buff_n].data_ptr = cpu_to_le32(mapping);
+			ksp->rx_ring[buff_n].length =
+				cpu_to_le32(MAX_RXBUF_SIZE);
+
+			wmb();
+
+			/* And give ownership over to the hardware */
+			ksp->rx_ring[buff_n].status = cpu_to_le32(RDES_OWN);
+		}
+	}
+}
+
+/* Maximum number of multicast addresses which the KS8695 HW supports */
+#define KS8695_NR_ADDRESSES	16
+
+/**
+ *	ks8695_init_partial_multicast - Init the mcast addr registers
+ *	@ksp: The device to initialise
+ *	@addr: The multicast address list to use
+ *	@nr_addr: The number of addresses in the list
+ *
+ *	This routine is a helper for ks8695_set_multicast - it writes
+ *	the additional-address registers in the KS8695 ethernet device
+ *	and cleans up any others left behind.
+ */
+static void
+ks8695_init_partial_multicast(struct ks8695_priv *ksp,
+			      struct dev_mc_list *addr,
+			      int nr_addr)
+{
+	u32 low, high;
+	int i;
+
+	for (i = 0; i < nr_addr; i++, addr = addr->next) {
+		/* Ran out of addresses? */
+		if (!addr)
+			break;
+		/* Ran out of space in chip? */
+		BUG_ON(i == KS8695_NR_ADDRESSES);
+
+		low = (addr->dmi_addr[2] << 24) | (addr->dmi_addr[3] << 16) |
+			(addr->dmi_addr[4] << 8) | (addr->dmi_addr[5]);
+		high = (addr->dmi_addr[0] << 8) | (addr->dmi_addr[1]);
+
+		ks8695_writereg(ksp, KS8695_AAL_(i), low);
+		ks8695_writereg(ksp, KS8695_AAH_(i), AAH_E | high);
+	}
+
+	/* Clear the remaining Additional Station Addresses */
+	for (; i < KS8695_NR_ADDRESSES; i++) {
+		ks8695_writereg(ksp, KS8695_AAL_(i), 0);
+		ks8695_writereg(ksp, KS8695_AAH_(i), 0);
+	}
+}
+
+/* Interrupt handling */
+
+/**
+ *	ks8695_tx_irq - Transmit IRQ handler
+ *	@irq: The IRQ which went off (ignored)
+ *	@dev_id: The net_device for the interrupt
+ *
+ *	Process the TX ring, clearing out any transmitted slots.
+ *	Allows the net_device to pass us new packets once slots are
+ *	freed.
+ */
+static irqreturn_t
+ks8695_tx_irq(int irq, void *dev_id)
+{
+	struct net_device *ndev = (struct net_device *)dev_id;
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+	int buff_n;
+
+	for (buff_n = 0; buff_n < MAX_TX_DESC; ++buff_n) {
+		if (ksp->tx_buffers[buff_n].skb &&
+		    !(ksp->tx_ring[buff_n].owner & cpu_to_le32(TDES_OWN))) {
+			rmb();
+			/* An SKB which is not owned by HW is present */
+			/* Update the stats for the net_device */
+			ndev->stats.tx_packets++;
+			ndev->stats.tx_bytes += ksp->tx_buffers[buff_n].length;
+
+			/* Free the packet from the ring */
+			ksp->tx_ring[buff_n].data_ptr = 0;
+
+			/* Free the sk_buff */
+			dma_unmap_single(ksp->dev,
+					 ksp->tx_buffers[buff_n].dma_ptr,
+					 ksp->tx_buffers[buff_n].length,
+					 DMA_TO_DEVICE);
+			dev_kfree_skb_irq(ksp->tx_buffers[buff_n].skb);
+			ksp->tx_buffers[buff_n].skb = NULL;
+			ksp->tx_ring_used--;
+		}
+	}
+
+	netif_wake_queue(ndev);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ *	ks8695_rx_irq - Receive IRQ handler
+ *	@irq: The IRQ which went off (ignored)
+ *	@dev_id: The net_device for the interrupt
+ *
+ *	Process the RX ring, passing any received packets up to the
+ *	host.  If we received anything other than errors, we then
+ *	refill the ring.
+ */
+static irqreturn_t
+ks8695_rx_irq(int irq, void *dev_id)
+{
+	struct net_device *ndev = (struct net_device *)dev_id;
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+	struct sk_buff *skb;
+	int buff_n;
+	u32 flags;
+	int pktlen;
+	int last_rx_processed = -1;
+
+	buff_n = ksp->next_rx_desc_read;
+	do {
+		if (ksp->rx_buffers[buff_n].skb &&
+		    !(ksp->rx_ring[buff_n].status & cpu_to_le32(RDES_OWN))) {
+			rmb();
+			flags = le32_to_cpu(ksp->rx_ring[buff_n].status);
+			/* Found an SKB which we own, this means we
+			 * received a packet
+			 */
+			if ((flags & (RDES_FS | RDES_LS)) !=
+			    (RDES_FS | RDES_LS)) {
+				/* This packet is not the first and
+				 * the last segment.  Therefore it is
+				 * a "spanning" packet and we can't
+				 * handle it
+				 */
+				goto rx_failure;
+			}
+
+			if (flags & (RDES_ES | RDES_RE)) {
+				/* It's an error packet */
+				ndev->stats.rx_errors++;
+				if (flags & RDES_TL)
+					ndev->stats.rx_length_errors++;
+				if (flags & RDES_RF)
+					ndev->stats.rx_length_errors++;
+				if (flags & RDES_CE)
+					ndev->stats.rx_crc_errors++;
+				if (flags & RDES_RE)
+					ndev->stats.rx_missed_errors++;
+
+				goto rx_failure;
+			}
+
+			pktlen = flags & RDES_FLEN;
+			pktlen -= 4; /* Drop the CRC */
+
+			/* Retrieve the sk_buff */
+			skb = ksp->rx_buffers[buff_n].skb;
+
+			/* Clear it from the ring */
+			ksp->rx_buffers[buff_n].skb = NULL;
+			ksp->rx_ring[buff_n].data_ptr = 0;
+
+			/* Unmap the SKB */
+			dma_unmap_single(ksp->dev,
+					 ksp->rx_buffers[buff_n].dma_ptr,
+					 ksp->rx_buffers[buff_n].length,
+					 DMA_FROM_DEVICE);
+
+			/* Relinquish the SKB to the network layer */
+			skb_put(skb, pktlen);
+			skb->protocol = eth_type_trans(skb, ndev);
+			netif_rx(skb);
+
+			/* Record stats */
+			ndev->last_rx = jiffies;
+			ndev->stats.rx_packets++;
+			ndev->stats.rx_bytes += pktlen;
+			goto rx_finished;
+
+rx_failure:
+			/* This ring entry is an error, but we can
+			 * re-use the skb
+			 */
+			/* Give the ring entry back to the hardware */
+			ksp->rx_ring[buff_n].status = cpu_to_le32(RDES_OWN);
+rx_finished:
+			/* And note this as processed so we can start
+			 * from here next time
+			 */
+			last_rx_processed = buff_n;
+		} else {
+			/* Ran out of things to process, stop now */
+			break;
+		}
+		buff_n = (buff_n + 1) & MAX_RX_DESC_MASK;
+	} while (buff_n != ksp->next_rx_desc_read);
+
+	/* And note which RX descriptor we last did anything with */
+	if (likely(last_rx_processed != -1))
+		ksp->next_rx_desc_read =
+			(last_rx_processed + 1) & MAX_RX_DESC_MASK;
+
+	/* And refill the buffers */
+	ks8695_refill_rxbuffers(ksp);
+
+	/* Kick the RX DMA engine, in case it became suspended */
+	ks8695_writereg(ksp, KS8695_DRSC, 0);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ *	ks8695_link_irq - Link change IRQ handler
+ *	@irq: The IRQ which went off (ignored)
+ *	@dev_id: The net_device for the interrupt
+ *
+ *	The WAN interface can generate an IRQ when the link changes,
+ *	report this to the net layer and the user.
+ */
+static irqreturn_t
+ks8695_link_irq(int irq, void *dev_id)
+{
+	struct net_device *ndev = (struct net_device *)dev_id;
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+	u32 ctrl;
+
+	ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
+	if (ctrl & WMC_WLS) {
+		netif_carrier_on(ndev);
+		if (netif_msg_link(ksp))
+			dev_info(ksp->dev,
+				 "%s: Link is now up (10%sMbps/%s-duplex)\n",
+				 ndev->name,
+				 (ctrl & WMC_WSS) ? "0" : "",
+				 (ctrl & WMC_WDS) ? "Full" : "Half");
+	} else {
+		netif_carrier_off(ndev);
+		if (netif_msg_link(ksp))
+			dev_info(ksp->dev, "%s: Link is now down.\n",
+				 ndev->name);
+	}
+
+	return IRQ_HANDLED;
+}
+
+
+/* KS8695 Device functions */
+
+/**
+ *	ks8695_reset - Reset a KS8695 ethernet interface
+ *	@ksp: The interface to reset
+ *
+ *	Perform an engine reset of the interface and re-program it
+ *	with sensible defaults.
+ */
+static void
+ks8695_reset(struct ks8695_priv *ksp)
+{
+	int reset_timeout = watchdog;
+	/* Issue the reset via the TX DMA control register */
+	ks8695_writereg(ksp, KS8695_DTXC, DTXC_TRST);
+	while (reset_timeout--) {
+		if (!(ks8695_readreg(ksp, KS8695_DTXC) & DTXC_TRST))
+			break;
+		msleep(1);
+	}
+
+	if (reset_timeout == 0) {
+		dev_crit(ksp->dev,
+			 "Timeout waiting for DMA engines to reset\n");
+		/* And blithely carry on */
+	}
+
+	/* Definitely wait long enough before attempting to program
+	 * the engines
+	 */
+	msleep(10);
+
+	/* RX: unicast and broadcast */
+	ks8695_writereg(ksp, KS8695_DRXC, DRXC_RU | DRXC_RB);
+	/* TX: pad and add CRC */
+	ks8695_writereg(ksp, KS8695_DTXC, DTXC_TEP | DTXC_TAC);
+}
+
+/**
+ *	ks8695_shutdown - Shut down a KS8695 ethernet interface
+ *	@ksp: The interface to shut down
+ *
+ *	This disables packet RX/TX, cleans up IRQs, drains the rings,
+ *	and basically places the interface into a clean shutdown
+ *	state.
+ */
+static void
+ks8695_shutdown(struct ks8695_priv *ksp)
+{
+	u32 ctrl;
+	int buff_n;
+
+	/* Disable packet transmission */
+	ctrl = ks8695_readreg(ksp, KS8695_DTXC);
+	ks8695_writereg(ksp, KS8695_DTXC, ctrl & ~DTXC_TE);
+
+	/* Disable packet reception */
+	ctrl = ks8695_readreg(ksp, KS8695_DRXC);
+	ks8695_writereg(ksp, KS8695_DRXC, ctrl & ~DRXC_RE);
+
+	/* Release the IRQs */
+	free_irq(ksp->rx_irq, ksp->ndev);
+	free_irq(ksp->tx_irq, ksp->ndev);
+	if (ksp->link_irq != -1)
+		free_irq(ksp->link_irq, ksp->ndev);
+
+	/* Throw away any pending TX packets */
+	for (buff_n = 0; buff_n < MAX_TX_DESC; ++buff_n) {
+		if (ksp->tx_buffers[buff_n].skb) {
+			/* Remove this SKB from the TX ring */
+			ksp->tx_ring[buff_n].owner = 0;
+			ksp->tx_ring[buff_n].status = 0;
+			ksp->tx_ring[buff_n].data_ptr = 0;
+
+			/* Unmap and bin this SKB */
+			dma_unmap_single(ksp->dev,
+					 ksp->tx_buffers[buff_n].dma_ptr,
+					 ksp->tx_buffers[buff_n].length,
+					 DMA_TO_DEVICE);
+			dev_kfree_skb_irq(ksp->tx_buffers[buff_n].skb);
+			ksp->tx_buffers[buff_n].skb = NULL;
+		}
+	}
+
+	/* Purge the RX buffers */
+	for (buff_n = 0; buff_n < MAX_RX_DESC; ++buff_n) {
+		if (ksp->rx_buffers[buff_n].skb) {
+			/* Remove the SKB from the RX ring */
+			ksp->rx_ring[buff_n].status = 0;
+			ksp->rx_ring[buff_n].data_ptr = 0;
+
+			/* Unmap and bin the SKB */
+			dma_unmap_single(ksp->dev,
+					 ksp->rx_buffers[buff_n].dma_ptr,
+					 ksp->rx_buffers[buff_n].length,
+					 DMA_FROM_DEVICE);
+			dev_kfree_skb_irq(ksp->rx_buffers[buff_n].skb);
+			ksp->rx_buffers[buff_n].skb = NULL;
+		}
+	}
+}
+
+
+/**
+ *	ks8695_setup_irq - IRQ setup helper function
+ *	@irq: The IRQ number to claim
+ *	@irq_name: The name to give the IRQ claimant
+ *	@handler: The function to call to handle the IRQ
+ *	@ndev: The net_device to pass in as the dev_id argument to the handler
+ *
+ *	Return 0 on success.
+ */
+static int
+ks8695_setup_irq(int irq, const char *irq_name,
+		 irq_handler_t handler, struct net_device *ndev)
+{
+	int ret;
+
+	ret = request_irq(irq, handler, IRQF_SHARED, irq_name, ndev);
+
+	if (ret) {
+		dev_err(&ndev->dev, "failure to request IRQ %d\n", irq);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ *	ks8695_init_net - Initialise a KS8695 ethernet interface
+ *	@ksp: The interface to initialise
+ *
+ *	This routine fills the RX ring, initialises the DMA engines,
+ *	allocates the IRQs and then starts the packet TX and RX
+ *	engines.
+ */
+static int
+ks8695_init_net(struct ks8695_priv *ksp)
+{
+	int ret;
+	u32 ctrl;
+
+	ks8695_refill_rxbuffers(ksp);
+
+	/* Initialise the DMA engines */
+	ks8695_writereg(ksp, KS8695_RDLB, (u32) ksp->rx_ring_dma);
+	ks8695_writereg(ksp, KS8695_TDLB, (u32) ksp->tx_ring_dma);
+
+	/* Request the IRQs */
+	ret = ks8695_setup_irq(ksp->rx_irq, ksp->rx_irq_name,
+			       ks8695_rx_irq, ksp->ndev);
+	if (ret)
+		return ret;
+	ret = ks8695_setup_irq(ksp->tx_irq, ksp->tx_irq_name,
+			       ks8695_tx_irq, ksp->ndev);
+	if (ret)
+		return ret;
+	if (ksp->link_irq != -1) {
+		ret = ks8695_setup_irq(ksp->link_irq, ksp->link_irq_name,
+				       ks8695_link_irq, ksp->ndev);
+		if (ret)
+			return ret;
+	}
+
+	/* Set up the ring indices */
+	ksp->next_rx_desc_read = 0;
+	ksp->tx_ring_next_slot = 0;
+	ksp->tx_ring_used = 0;
+
+	/* Bring up transmission */
+	ctrl = ks8695_readreg(ksp, KS8695_DTXC);
+	/* Enable packet transmission */
+	ks8695_writereg(ksp, KS8695_DTXC, ctrl | DTXC_TE);
+
+	/* Bring up the reception */
+	ctrl = ks8695_readreg(ksp, KS8695_DRXC);
+	/* Enable packet reception */
+	ks8695_writereg(ksp, KS8695_DRXC, ctrl | DRXC_RE);
+	/* And start the DMA engine */
+	ks8695_writereg(ksp, KS8695_DRSC, 0);
+
+	/* All done */
+	return 0;
+}
+
+/**
+ *	ks8695_release_device - HW resource release for KS8695 e-net
+ *	@ksp: The device to be freed
+ *
+ *	This unallocates io memory regions, dma-coherent regions etc
+ *	which were allocated in ks8695_probe.
+ */
+static void
+ks8695_release_device(struct ks8695_priv *ksp)
+{
+	/* Unmap the registers */
+	iounmap(ksp->io_regs);
+	if (ksp->phyiface_regs)
+		iounmap(ksp->phyiface_regs);
+
+	/* And release the request */
+	release_resource(ksp->regs_req);
+	kfree(ksp->regs_req);
+	if (ksp->phyiface_req) {
+		release_resource(ksp->phyiface_req);
+		kfree(ksp->phyiface_req);
+	}
+
+	/* Free the ring buffers */
+	dma_free_coherent(ksp->dev, RING_DMA_SIZE,
+			  ksp->ring_base, ksp->ring_base_dma);
+}
+
+/* Ethtool support */
+
+/**
+ *	ks8695_get_msglevel - Get the messages enabled for emission
+ *	@ndev: The network device to read from
+ */
+static u32
+ks8695_get_msglevel(struct net_device *ndev)
+{
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+
+	return ksp->msg_enable;
+}
+
+/**
+ *	ks8695_set_msglevel - Set the messages enabled for emission
+ *	@ndev: The network device to configure
+ *	@value: The messages to set for emission
+ */
+static void
+ks8695_set_msglevel(struct net_device *ndev, u32 value)
+{
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+
+	ksp->msg_enable = value;
+}
+
+/**
+ *	ks8695_get_settings - Get device-specific settings.
+ *	@ndev: The network device to read settings from
+ *	@cmd: The ethtool structure to read into
+ */
+static int
+ks8695_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
+{
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+	u32 ctrl;
+
+	/* All ports on the KS8695 support these... */
+	cmd->supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+			  SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+			  SUPPORTED_TP | SUPPORTED_MII);
+	cmd->transceiver = XCVR_INTERNAL;
+
+	/* Port specific extras */
+	switch (ksp->dtype) {
+	case KS8695_DTYPE_HPNA:
+		cmd->phy_address = 0;
+		/* not supported for HPNA */
+		cmd->autoneg = AUTONEG_DISABLE;
+
+		/* BUG: Erm, dtype hpna implies no phy regs */
+		/*
+		ctrl = readl(KS8695_MISC_VA + KS8695_HMC);
+		cmd->speed = (ctrl & HMC_HSS) ? SPEED_100 : SPEED_10;
+		cmd->duplex = (ctrl & HMC_HDS) ? DUPLEX_FULL : DUPLEX_HALF;
+		*/
+		return -EOPNOTSUPP;
+	case KS8695_DTYPE_WAN:
+		cmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
+		cmd->port = PORT_MII;
+		cmd->supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause);
+		cmd->phy_address = 0;
+
+		ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
+		if ((ctrl & WMC_WAND) == 0) {
+			/* auto-negotiation is enabled */
+			cmd->advertising |= ADVERTISED_Autoneg;
+			if (ctrl & WMC_WANA100F)
+				cmd->advertising |= ADVERTISED_100baseT_Full;
+			if (ctrl & WMC_WANA100H)
+				cmd->advertising |= ADVERTISED_100baseT_Half;
+			if (ctrl & WMC_WANA10F)
+				cmd->advertising |= ADVERTISED_10baseT_Full;
+			if (ctrl & WMC_WANA10H)
+				cmd->advertising |= ADVERTISED_10baseT_Half;
+			if (ctrl & WMC_WANAP)
+				cmd->advertising |= ADVERTISED_Pause;
+			cmd->autoneg = AUTONEG_ENABLE;
+
+			cmd->speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10;
+			cmd->duplex = (ctrl & WMC_WDS) ?
+				DUPLEX_FULL : DUPLEX_HALF;
+		} else {
+			/* auto-negotiation is disabled */
+			cmd->autoneg = AUTONEG_DISABLE;
+
+			cmd->speed = (ctrl & WMC_WANF100) ?
+				SPEED_100 : SPEED_10;
+			cmd->duplex = (ctrl & WMC_WANFF) ?
+				DUPLEX_FULL : DUPLEX_HALF;
+		}
+		break;
+	case KS8695_DTYPE_LAN:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+/**
+ *	ks8695_set_settings - Set device-specific settings.
+ *	@ndev: The network device to configure
+ *	@cmd: The settings to configure
+ */
+static int
+ks8695_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
+{
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+	u32 ctrl;
+
+	if ((cmd->speed != SPEED_10) && (cmd->speed != SPEED_100))
+		return -EINVAL;
+	if ((cmd->duplex != DUPLEX_HALF) && (cmd->duplex != DUPLEX_FULL))
+		return -EINVAL;
+	if (cmd->port != PORT_MII)
+		return -EINVAL;
+	if (cmd->transceiver != XCVR_INTERNAL)
+		return -EINVAL;
+	if ((cmd->autoneg != AUTONEG_DISABLE) &&
+	    (cmd->autoneg != AUTONEG_ENABLE))
+		return -EINVAL;
+
+	if (cmd->autoneg == AUTONEG_ENABLE) {
+		if ((cmd->advertising & (ADVERTISED_10baseT_Half |
+				ADVERTISED_10baseT_Full |
+				ADVERTISED_100baseT_Half |
+				ADVERTISED_100baseT_Full)) == 0)
+			return -EINVAL;
+
+		switch (ksp->dtype) {
+		case KS8695_DTYPE_HPNA:
+			/* HPNA does not support auto-negotiation. */
+			return -EINVAL;
+		case KS8695_DTYPE_WAN:
+			ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
+
+			ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H |
+				  WMC_WANA10F | WMC_WANA10H);
+			if (cmd->advertising & ADVERTISED_100baseT_Full)
+				ctrl |= WMC_WANA100F;
+			if (cmd->advertising & ADVERTISED_100baseT_Half)
+				ctrl |= WMC_WANA100H;
+			if (cmd->advertising & ADVERTISED_10baseT_Full)
+				ctrl |= WMC_WANA10F;
+			if (cmd->advertising & ADVERTISED_10baseT_Half)
+				ctrl |= WMC_WANA10H;
+
+			/* force a re-negotiation */
+			ctrl |= WMC_WANR;
+			writel(ctrl, ksp->phyiface_regs + KS8695_WMC);
+			break;
+		case KS8695_DTYPE_LAN:
+			return -EOPNOTSUPP;
+		}
+
+	} else {
+		switch (ksp->dtype) {
+		case KS8695_DTYPE_HPNA:
+			/* BUG: dtype_hpna implies no phy registers */
+			/*
+			ctrl = __raw_readl(KS8695_MISC_VA + KS8695_HMC);
+
+			ctrl &= ~(HMC_HSS | HMC_HDS);
+			if (cmd->speed == SPEED_100)
+				ctrl |= HMC_HSS;
+			if (cmd->duplex == DUPLEX_FULL)
+				ctrl |= HMC_HDS;
+
+			__raw_writel(ctrl, KS8695_MISC_VA + KS8695_HMC);
+			*/
+			return -EOPNOTSUPP;
+		case KS8695_DTYPE_WAN:
+			ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
+
+			/* disable auto-negotiation */
+			ctrl |= WMC_WAND;
+			ctrl &= ~(WMC_WANF100 | WMC_WANFF);
+
+			if (cmd->speed == SPEED_100)
+				ctrl |= WMC_WANF100;
+			if (cmd->duplex == DUPLEX_FULL)
+				ctrl |= WMC_WANFF;
+
+			writel(ctrl, ksp->phyiface_regs + KS8695_WMC);
+			break;
+		case KS8695_DTYPE_LAN:
+			return -EOPNOTSUPP;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *	ks8695_nwayreset - Restart the autonegotiation on the port.
+ *	@ndev: The network device to restart autoneotiation on
+ */
+static int
+ks8695_nwayreset(struct net_device *ndev)
+{
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+	u32 ctrl;
+
+	switch (ksp->dtype) {
+	case KS8695_DTYPE_HPNA:
+		/* No phy means no autonegotiation on hpna */
+		return -EINVAL;
+	case KS8695_DTYPE_WAN:
+		ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
+
+		if ((ctrl & WMC_WAND) == 0)
+			writel(ctrl | WMC_WANR,
+			       ksp->phyiface_regs + KS8695_WMC);
+		else
+			/* auto-negotiation not enabled */
+			return -EINVAL;
+		break;
+	case KS8695_DTYPE_LAN:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+/**
+ *	ks8695_get_link - Retrieve link status of network interface
+ *	@ndev: The network interface to retrive the link status of.
+ */
+static u32
+ks8695_get_link(struct net_device *ndev)
+{
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+	u32 ctrl;
+
+	switch (ksp->dtype) {
+	case KS8695_DTYPE_HPNA:
+		/* HPNA always has link */
+		return 1;
+	case KS8695_DTYPE_WAN:
+		/* WAN we can read the PHY for */
+		ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
+		return ctrl & WMC_WLS;
+	case KS8695_DTYPE_LAN:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+/**
+ *	ks8695_get_pause - Retrieve network pause/flow-control advertising
+ *	@ndev: The device to retrieve settings from
+ *	@param: The structure to fill out with the information
+ */
+static void
+ks8695_get_pause(struct net_device *ndev, struct ethtool_pauseparam *param)
+{
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+	u32 ctrl;
+
+	switch (ksp->dtype) {
+	case KS8695_DTYPE_HPNA:
+		/* No phy link on hpna to configure */
+		return;
+	case KS8695_DTYPE_WAN:
+		ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
+
+		/* advertise Pause */
+		param->autoneg = (ctrl & WMC_WANAP);
+
+		/* current Rx Flow-control */
+		ctrl = ks8695_readreg(ksp, KS8695_DRXC);
+		param->rx_pause = (ctrl & DRXC_RFCE);
+
+		/* current Tx Flow-control */
+		ctrl = ks8695_readreg(ksp, KS8695_DTXC);
+		param->tx_pause = (ctrl & DTXC_TFCE);
+		break;
+	case KS8695_DTYPE_LAN:
+		/* The LAN's "phy" is a direct-attached switch */
+		return;
+	}
+}
+
+/**
+ *	ks8695_set_pause - Configure pause/flow-control
+ *	@ndev: The device to configure
+ *	@param: The pause parameters to set
+ *
+ *	TODO: Implement this
+ */
+static int
+ks8695_set_pause(struct net_device *ndev, struct ethtool_pauseparam *param)
+{
+	return -EOPNOTSUPP;
+}
+
+/**
+ *	ks8695_get_drvinfo - Retrieve driver information
+ *	@ndev: The network device to retrieve info about
+ *	@info: The info structure to fill out.
+ */
+static void
+ks8695_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info)
+{
+	strlcpy(info->driver, MODULENAME, sizeof(info->driver));
+	strlcpy(info->version, MODULEVERSION, sizeof(info->version));
+	strlcpy(info->bus_info, ndev->dev.parent->bus_id,
+		sizeof(info->bus_info));
+}
+
+static struct ethtool_ops ks8695_ethtool_ops = {
+	.get_msglevel	= ks8695_get_msglevel,
+	.set_msglevel	= ks8695_set_msglevel,
+	.get_settings	= ks8695_get_settings,
+	.set_settings	= ks8695_set_settings,
+	.nway_reset	= ks8695_nwayreset,
+	.get_link	= ks8695_get_link,
+	.get_pauseparam = ks8695_get_pause,
+	.set_pauseparam = ks8695_set_pause,
+	.get_drvinfo	= ks8695_get_drvinfo,
+};
+
+/* Network device interface functions */
+
+/**
+ *	ks8695_set_mac - Update MAC in net dev and HW
+ *	@ndev: The network device to update
+ *	@addr: The new MAC address to set
+ */
+static int
+ks8695_set_mac(struct net_device *ndev, void *addr)
+{
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+	struct sockaddr *address = addr;
+
+	if (!is_valid_ether_addr(address->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(ndev->dev_addr, address->sa_data, ndev->addr_len);
+
+	ks8695_update_mac(ksp);
+
+	dev_dbg(ksp->dev, "%s: Updated MAC address to %pM\n",
+		ndev->name, ndev->dev_addr);
+
+	return 0;
+}
+
+/**
+ *	ks8695_set_multicast - Set up the multicast behaviour of the interface
+ *	@ndev: The net_device to configure
+ *
+ *	This routine, called by the net layer, configures promiscuity
+ *	and multicast reception behaviour for the interface.
+ */
+static void
+ks8695_set_multicast(struct net_device *ndev)
+{
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+	u32 ctrl;
+
+	ctrl = ks8695_readreg(ksp, KS8695_DRXC);
+
+	if (ndev->flags & IFF_PROMISC) {
+		/* enable promiscuous mode */
+		ctrl |= DRXC_RA;
+	} else if (ndev->flags & ~IFF_PROMISC) {
+		/* disable promiscuous mode */
+		ctrl &= ~DRXC_RA;
+	}
+
+	if (ndev->flags & IFF_ALLMULTI) {
+		/* enable all multicast mode */
+		ctrl |= DRXC_RM;
+	} else if (ndev->mc_count > KS8695_NR_ADDRESSES) {
+		/* more specific multicast addresses than can be
+		 * handled in hardware
+		 */
+		ctrl |= DRXC_RM;
+	} else {
+		/* enable specific multicasts */
+		ctrl &= ~DRXC_RM;
+		ks8695_init_partial_multicast(ksp, ndev->mc_list,
+					      ndev->mc_count);
+	}
+
+	ks8695_writereg(ksp, KS8695_DRXC, ctrl);
+}
+
+/**
+ *	ks8695_timeout - Handle a network tx/rx timeout.
+ *	@ndev: The net_device which timed out.
+ *
+ *	A network transaction timed out, reset the device.
+ */
+static void
+ks8695_timeout(struct net_device *ndev)
+{
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	ks8695_shutdown(ksp);
+
+	ks8695_reset(ksp);
+
+	ks8695_update_mac(ksp);
+
+	/* We ignore the return from this since it managed to init
+	 * before it probably will be okay to init again.
+	 */
+	ks8695_init_net(ksp);
+
+	/* Reconfigure promiscuity etc */
+	ks8695_set_multicast(ndev);
+
+	/* And start the TX queue once more */
+	netif_start_queue(ndev);
+}
+
+/**
+ *	ks8695_start_xmit - Start a packet transmission
+ *	@skb: The packet to transmit
+ *	@ndev: The network device to send the packet on
+ *
+ *	This routine, called by the net layer, takes ownership of the
+ *	sk_buff and adds it to the TX ring. It then kicks the TX DMA
+ *	engine to ensure transmission begins.
+ */
+static int
+ks8695_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+	int buff_n;
+	dma_addr_t dmap;
+
+	spin_lock_irq(&ksp->txq_lock);
+
+	if (ksp->tx_ring_used == MAX_TX_DESC) {
+		/* Somehow we got entered when we have no room */
+		spin_unlock_irq(&ksp->txq_lock);
+		return NETDEV_TX_BUSY;
+	}
+
+	buff_n = ksp->tx_ring_next_slot;
+
+	BUG_ON(ksp->tx_buffers[buff_n].skb);
+
+	dmap = dma_map_single(ksp->dev, skb->data, skb->len, DMA_TO_DEVICE);
+	if (unlikely(dma_mapping_error(ksp->dev, dmap))) {
+		/* Failed to DMA map this SKB, give it back for now */
+		spin_unlock_irq(&ksp->txq_lock);
+		dev_dbg(ksp->dev, "%s: Could not map DMA memory for "\
+			"transmission, trying later\n", ndev->name);
+		return NETDEV_TX_BUSY;
+	}
+
+	ksp->tx_buffers[buff_n].dma_ptr = dmap;
+	/* Mapped okay, store the buffer pointer and length for later */
+	ksp->tx_buffers[buff_n].skb = skb;
+	ksp->tx_buffers[buff_n].length = skb->len;
+
+	/* Fill out the TX descriptor */
+	ksp->tx_ring[buff_n].data_ptr =
+		cpu_to_le32(ksp->tx_buffers[buff_n].dma_ptr);
+	ksp->tx_ring[buff_n].status =
+		cpu_to_le32(TDES_IC | TDES_FS | TDES_LS |
+			    (skb->len & TDES_TBS));
+
+	wmb();
+
+	/* Hand it over to the hardware */
+	ksp->tx_ring[buff_n].owner = cpu_to_le32(TDES_OWN);
+
+	if (++ksp->tx_ring_used == MAX_TX_DESC)
+		netif_stop_queue(ndev);
+
+	ndev->trans_start = jiffies;
+
+	/* Kick the TX DMA in case it decided to go IDLE */
+	ks8695_writereg(ksp, KS8695_DTSC, 0);
+
+	/* And update the next ring slot */
+	ksp->tx_ring_next_slot = (buff_n + 1) & MAX_TX_DESC_MASK;
+
+	spin_unlock_irq(&ksp->txq_lock);
+	return NETDEV_TX_OK;
+}
+
+/**
+ *	ks8695_stop - Stop (shutdown) a KS8695 ethernet interface
+ *	@ndev: The net_device to stop
+ *
+ *	This disables the TX queue and cleans up a KS8695 ethernet
+ *	device.
+ */
+static int
+ks8695_stop(struct net_device *ndev)
+{
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	netif_carrier_off(ndev);
+
+	ks8695_shutdown(ksp);
+
+	return 0;
+}
+
+/**
+ *	ks8695_open - Open (bring up) a KS8695 ethernet interface
+ *	@ndev: The net_device to open
+ *
+ *	This resets, configures the MAC, initialises the RX ring and
+ *	DMA engines and starts the TX queue for a KS8695 ethernet
+ *	device.
+ */
+static int
+ks8695_open(struct net_device *ndev)
+{
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+	int ret;
+
+	if (!is_valid_ether_addr(ndev->dev_addr))
+		return -EADDRNOTAVAIL;
+
+	ks8695_reset(ksp);
+
+	ks8695_update_mac(ksp);
+
+	ret = ks8695_init_net(ksp);
+	if (ret) {
+		ks8695_shutdown(ksp);
+		return ret;
+	}
+
+	netif_start_queue(ndev);
+
+	return 0;
+}
+
+/* Platform device driver */
+
+/**
+ *	ks8695_init_switch - Init LAN switch to known good defaults.
+ *	@ksp: The device to initialise
+ *
+ *	This initialises the LAN switch in the KS8695 to a known-good
+ *	set of defaults.
+ */
+static void __devinit
+ks8695_init_switch(struct ks8695_priv *ksp)
+{
+	u32 ctrl;
+
+	/* Default value for SEC0 according to datasheet */
+	ctrl = 0x40819e00;
+
+	/* LED0 = Speed	 LED1 = Link/Activity */
+	ctrl &= ~(SEC0_LLED1S | SEC0_LLED0S);
+	ctrl |= (LLED0S_LINK | LLED1S_LINK_ACTIVITY);
+
+	/* Enable Switch */
+	ctrl |= SEC0_ENABLE;
+
+	writel(ctrl, ksp->phyiface_regs + KS8695_SEC0);
+
+	/* Defaults for SEC1 */
+	writel(0x9400100, ksp->phyiface_regs + KS8695_SEC1);
+}
+
+/**
+ *	ks8695_init_wan_phy - Initialise the WAN PHY to sensible defaults
+ *	@ksp: The device to initialise
+ *
+ *	This initialises a KS8695's WAN phy to sensible values for
+ *	autonegotiation etc.
+ */
+static void __devinit
+ks8695_init_wan_phy(struct ks8695_priv *ksp)
+{
+	u32 ctrl;
+
+	/* Support auto-negotiation */
+	ctrl = (WMC_WANAP | WMC_WANA100F | WMC_WANA100H |
+		WMC_WANA10F | WMC_WANA10H);
+
+	/* LED0 = Activity , LED1 = Link */
+	ctrl |= (WLED0S_ACTIVITY | WLED1S_LINK);
+
+	/* Restart Auto-negotiation */
+	ctrl |= WMC_WANR;
+
+	writel(ctrl, ksp->phyiface_regs + KS8695_WMC);
+
+	writel(0, ksp->phyiface_regs + KS8695_WPPM);
+	writel(0, ksp->phyiface_regs + KS8695_PPS);
+}
+
+static const struct net_device_ops ks8695_netdev_ops = {
+	.ndo_open		= ks8695_open,
+	.ndo_stop		= ks8695_stop,
+	.ndo_start_xmit		= ks8695_start_xmit,
+	.ndo_tx_timeout		= ks8695_timeout,
+	.ndo_set_mac_address	= ks8695_set_mac,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_multicast_list	= ks8695_set_multicast,
+};
+
+/**
+ *	ks8695_probe - Probe and initialise a KS8695 ethernet interface
+ *	@pdev: The platform device to probe
+ *
+ *	Initialise a KS8695 ethernet device from platform data.
+ *
+ *	This driver requires at least one IORESOURCE_MEM for the
+ *	registers and two IORESOURCE_IRQ for the RX and TX IRQs
+ *	respectively. It can optionally take an additional
+ *	IORESOURCE_MEM for the switch or phy in the case of the lan or
+ *	wan ports, and an IORESOURCE_IRQ for the link IRQ for the wan
+ *	port.
+ */
+static int __devinit
+ks8695_probe(struct platform_device *pdev)
+{
+	struct ks8695_priv *ksp;
+	struct net_device *ndev;
+	struct resource *regs_res, *phyiface_res;
+	struct resource *rxirq_res, *txirq_res, *linkirq_res;
+	int ret = 0;
+	int buff_n;
+	u32 machigh, maclow;
+
+	/* Initialise a net_device */
+	ndev = alloc_etherdev(sizeof(struct ks8695_priv));
+	if (!ndev) {
+		dev_err(&pdev->dev, "could not allocate device.\n");
+		return -ENOMEM;
+	}
+
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+
+	dev_dbg(&pdev->dev, "ks8695_probe() called\n");
+
+	/* Configure our private structure a little */
+	ksp = netdev_priv(ndev);
+	memset(ksp, 0, sizeof(struct ks8695_priv));
+
+	ksp->dev = &pdev->dev;
+	ksp->ndev = ndev;
+	ksp->msg_enable = NETIF_MSG_LINK;
+
+	/* Retrieve resources */
+	regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	phyiface_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+
+	rxirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	txirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+	linkirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 2);
+
+	if (!(regs_res && rxirq_res && txirq_res)) {
+		dev_err(ksp->dev, "insufficient resources\n");
+		ret = -ENOENT;
+		goto failure;
+	}
+
+	ksp->regs_req = request_mem_region(regs_res->start,
+					   resource_size(regs_res),
+					   pdev->name);
+
+	if (!ksp->regs_req) {
+		dev_err(ksp->dev, "cannot claim register space\n");
+		ret = -EIO;
+		goto failure;
+	}
+
+	ksp->io_regs = ioremap(regs_res->start, resource_size(regs_res));
+
+	if (!ksp->io_regs) {
+		dev_err(ksp->dev, "failed to ioremap registers\n");
+		ret = -EINVAL;
+		goto failure;
+	}
+
+	if (phyiface_res) {
+		ksp->phyiface_req =
+			request_mem_region(phyiface_res->start,
+					   resource_size(phyiface_res),
+					   phyiface_res->name);
+
+		if (!ksp->phyiface_req) {
+			dev_err(ksp->dev,
+				"cannot claim switch register space\n");
+			ret = -EIO;
+			goto failure;
+		}
+
+		ksp->phyiface_regs = ioremap(phyiface_res->start,
+					     resource_size(phyiface_res));
+
+		if (!ksp->phyiface_regs) {
+			dev_err(ksp->dev,
+				"failed to ioremap switch registers\n");
+			ret = -EINVAL;
+			goto failure;
+		}
+	}
+
+	ksp->rx_irq = rxirq_res->start;
+	ksp->rx_irq_name = rxirq_res->name ? rxirq_res->name : "Ethernet RX";
+	ksp->tx_irq = txirq_res->start;
+	ksp->tx_irq_name = txirq_res->name ? txirq_res->name : "Ethernet TX";
+	ksp->link_irq = (linkirq_res ? linkirq_res->start : -1);
+	ksp->link_irq_name = (linkirq_res && linkirq_res->name) ?
+		linkirq_res->name : "Ethernet Link";
+
+	/* driver system setup */
+	ndev->netdev_ops = &ks8695_netdev_ops;
+	SET_ETHTOOL_OPS(ndev, &ks8695_ethtool_ops);
+	ndev->watchdog_timeo	 = msecs_to_jiffies(watchdog);
+
+	/* Retrieve the default MAC addr from the chip. */
+	/* The bootloader should have left it in there for us. */
+
+	machigh = ks8695_readreg(ksp, KS8695_MAH);
+	maclow = ks8695_readreg(ksp, KS8695_MAL);
+
+	ndev->dev_addr[0] = (machigh >> 8) & 0xFF;
+	ndev->dev_addr[1] = machigh & 0xFF;
+	ndev->dev_addr[2] = (maclow >> 24) & 0xFF;
+	ndev->dev_addr[3] = (maclow >> 16) & 0xFF;
+	ndev->dev_addr[4] = (maclow >> 8) & 0xFF;
+	ndev->dev_addr[5] = maclow & 0xFF;
+
+	if (!is_valid_ether_addr(ndev->dev_addr))
+		dev_warn(ksp->dev, "%s: Invalid ethernet MAC address. Please "
+			 "set using ifconfig\n", ndev->name);
+
+	/* In order to be efficient memory-wise, we allocate both
+	 * rings in one go.
+	 */
+	ksp->ring_base = dma_alloc_coherent(&pdev->dev, RING_DMA_SIZE,
+					    &ksp->ring_base_dma, GFP_KERNEL);
+	if (!ksp->ring_base) {
+		ret = -ENOMEM;
+		goto failure;
+	}
+
+	/* Specify the TX DMA ring buffer */
+	ksp->tx_ring = ksp->ring_base;
+	ksp->tx_ring_dma = ksp->ring_base_dma;
+
+	/* And initialise the queue's lock */
+	spin_lock_init(&ksp->txq_lock);
+
+	/* Specify the RX DMA ring buffer */
+	ksp->rx_ring = ksp->ring_base + TX_RING_DMA_SIZE;
+	ksp->rx_ring_dma = ksp->ring_base_dma + TX_RING_DMA_SIZE;
+
+	/* Zero the descriptor rings */
+	memset(ksp->tx_ring, 0, TX_RING_DMA_SIZE);
+	memset(ksp->rx_ring, 0, RX_RING_DMA_SIZE);
+
+	/* Build the rings */
+	for (buff_n = 0; buff_n < MAX_TX_DESC; ++buff_n) {
+		ksp->tx_ring[buff_n].next_desc =
+			cpu_to_le32(ksp->tx_ring_dma +
+				    (sizeof(struct tx_ring_desc) *
+				     ((buff_n + 1) & MAX_TX_DESC_MASK)));
+	}
+
+	for (buff_n = 0; buff_n < MAX_RX_DESC; ++buff_n) {
+		ksp->rx_ring[buff_n].next_desc =
+			cpu_to_le32(ksp->rx_ring_dma +
+				    (sizeof(struct rx_ring_desc) *
+				     ((buff_n + 1) & MAX_RX_DESC_MASK)));
+	}
+
+	/* Initialise the port (physically) */
+	if (ksp->phyiface_regs && ksp->link_irq == -1) {
+		ks8695_init_switch(ksp);
+		ksp->dtype = KS8695_DTYPE_LAN;
+	} else if (ksp->phyiface_regs && ksp->link_irq != -1) {
+		ks8695_init_wan_phy(ksp);
+		ksp->dtype = KS8695_DTYPE_WAN;
+	} else {
+		/* No initialisation since HPNA does not have a PHY */
+		ksp->dtype = KS8695_DTYPE_HPNA;
+	}
+
+	/* And bring up the net_device with the net core */
+	platform_set_drvdata(pdev, ndev);
+	ret = register_netdev(ndev);
+
+	if (ret == 0) {
+		dev_info(ksp->dev, "ks8695 ethernet (%s) MAC: %pM\n",
+			 ks8695_port_type(ksp), ndev->dev_addr);
+	} else {
+		/* Report the failure to register the net_device */
+		dev_err(ksp->dev, "ks8695net: failed to register netdev.\n");
+		goto failure;
+	}
+
+	/* All is well */
+	return 0;
+
+	/* Error exit path */
+failure:
+	ks8695_release_device(ksp);
+	free_netdev(ndev);
+
+	return ret;
+}
+
+/**
+ *	ks8695_drv_suspend - Suspend a KS8695 ethernet platform device.
+ *	@pdev: The device to suspend
+ *	@state: The suspend state
+ *
+ *	This routine detaches and shuts down a KS8695 ethernet device.
+ */
+static int
+ks8695_drv_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+
+	ksp->in_suspend = 1;
+
+	if (netif_running(ndev)) {
+		netif_device_detach(ndev);
+		ks8695_shutdown(ksp);
+	}
+
+	return 0;
+}
+
+/**
+ *	ks8695_drv_resume - Resume a KS8695 ethernet platform device.
+ *	@pdev: The device to resume
+ *
+ *	This routine re-initialises and re-attaches a KS8695 ethernet
+ *	device.
+ */
+static int
+ks8695_drv_resume(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+
+	if (netif_running(ndev)) {
+		ks8695_reset(ksp);
+		ks8695_init_net(ksp);
+		ks8695_set_multicast(ndev);
+		netif_device_attach(ndev);
+	}
+
+	ksp->in_suspend = 0;
+
+	return 0;
+}
+
+/**
+ *	ks8695_drv_remove - Remove a KS8695 net device on driver unload.
+ *	@pdev: The platform device to remove
+ *
+ *	This unregisters and releases a KS8695 ethernet device.
+ */
+static int __devexit
+ks8695_drv_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct ks8695_priv *ksp = netdev_priv(ndev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	unregister_netdev(ndev);
+	ks8695_release_device(ksp);
+	free_netdev(ndev);
+
+	dev_dbg(&pdev->dev, "released and freed device\n");
+	return 0;
+}
+
+static struct platform_driver ks8695_driver = {
+	.driver = {
+		.name	= MODULENAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ks8695_probe,
+	.remove		= __devexit_p(ks8695_drv_remove),
+	.suspend	= ks8695_drv_suspend,
+	.resume		= ks8695_drv_resume,
+};
+
+/* Module interface */
+
+static int __init
+ks8695_init(void)
+{
+	printk(KERN_INFO "%s Ethernet driver, V%s\n",
+	       MODULENAME, MODULEVERSION);
+
+	return platform_driver_register(&ks8695_driver);
+}
+
+static void __exit
+ks8695_cleanup(void)
+{
+	platform_driver_unregister(&ks8695_driver);
+}
+
+module_init(ks8695_init);
+module_exit(ks8695_cleanup);
+
+MODULE_AUTHOR("Simtec Electronics")
+MODULE_DESCRIPTION("Micrel KS8695 (Centaur) Ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MODULENAME);
+
+module_param(watchdog, int, 0400);
+MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
diff --git a/drivers/net/arm/ks8695net.h b/drivers/net/arm/ks8695net.h
new file mode 100644
index 00000000000..80eff6ea516
--- /dev/null
+++ b/drivers/net/arm/ks8695net.h
@@ -0,0 +1,107 @@
+/*
+ * Micrel KS8695 (Centaur) Ethernet.
+ *
+ * Copyright 2008 Simtec Electronics
+ *		  Daniel Silverstone <dsilvers@simtec.co.uk>
+ *		  Vincent Sanders <vince@simtec.co.uk>
+ */
+
+#ifndef KS8695NET_H
+#define KS8695NET_H
+
+/* Receive descriptor flags */
+#define RDES_OWN	(1 << 31)	/* Ownership */
+#define RDES_FS		(1 << 30)	/* First Descriptor */
+#define RDES_LS		(1 << 29)	/* Last Descriptor */
+#define RDES_IPE	(1 << 28)	/* IP Checksum error */
+#define RDES_TCPE	(1 << 27)	/* TCP Checksum error */
+#define RDES_UDPE	(1 << 26)	/* UDP Checksum error */
+#define RDES_ES		(1 << 25)	/* Error summary */
+#define RDES_MF		(1 << 24)	/* Multicast Frame */
+#define RDES_RE		(1 << 19)	/* MII Error reported */
+#define RDES_TL		(1 << 18)	/* Frame too Long */
+#define RDES_RF		(1 << 17)	/* Runt Frame */
+#define RDES_CE		(1 << 16)	/* CRC error */
+#define RDES_FT		(1 << 15)	/* Frame Type */
+#define RDES_FLEN	(0x7ff)		/* Frame Length */
+
+#define RDES_RER	(1 << 25)	/* Receive End of Ring */
+#define RDES_RBS	(0x7ff)		/* Receive Buffer Size */
+
+/* Transmit descriptor flags */
+
+#define TDES_OWN	(1 << 31)	/* Ownership */
+
+#define TDES_IC		(1 << 31)	/* Interrupt on Completion */
+#define TDES_FS		(1 << 30)	/* First Segment */
+#define TDES_LS		(1 << 29)	/* Last Segment */
+#define TDES_IPCKG	(1 << 28)	/* IP Checksum generate */
+#define TDES_TCPCKG	(1 << 27)	/* TCP Checksum generate */
+#define TDES_UDPCKG	(1 << 26)	/* UDP Checksum generate */
+#define TDES_TER	(1 << 25)	/* Transmit End of Ring */
+#define TDES_TBS	(0x7ff)		/* Transmit Buffer Size */
+
+/*
+ * Network controller register offsets
+ */
+#define KS8695_DTXC		(0x00)		/* DMA Transmit Control */
+#define KS8695_DRXC		(0x04)		/* DMA Receive Control */
+#define KS8695_DTSC		(0x08)		/* DMA Transmit Start Command */
+#define KS8695_DRSC		(0x0c)		/* DMA Receive Start Command */
+#define KS8695_TDLB		(0x10)		/* Transmit Descriptor List
+						 * Base Address
+						 */
+#define KS8695_RDLB		(0x14)		/* Receive Descriptor List
+						 * Base Address
+						 */
+#define KS8695_MAL		(0x18)		/* MAC Station Address Low */
+#define KS8695_MAH		(0x1c)		/* MAC Station Address High */
+#define KS8695_AAL_(n)		(0x80 + ((n)*8))	/* MAC Additional
+							 * Station Address
+							 * (0..15) Low
+							 */
+#define KS8695_AAH_(n)		(0x84 + ((n)*8))	/* MAC Additional
+							 * Station Address
+							 * (0..15) High
+							 */
+
+
+/* DMA Transmit Control Register */
+#define DTXC_TRST		(1    << 31)	/* Soft Reset */
+#define DTXC_TBS		(0x3f << 24)	/* Transmit Burst Size */
+#define DTXC_TUCG		(1    << 18)	/* Transmit UDP
+						 * Checksum Generate
+						 */
+#define DTXC_TTCG		(1    << 17)	/* Transmit TCP
+						 * Checksum Generate
+						 */
+#define DTXC_TICG		(1    << 16)	/* Transmit IP
+						 * Checksum Generate
+						 */
+#define DTXC_TFCE		(1    <<  9)	/* Transmit Flow
+						 * Control Enable
+						 */
+#define DTXC_TLB		(1    <<  8)	/* Loopback mode */
+#define DTXC_TEP		(1    <<  2)	/* Transmit Enable Padding */
+#define DTXC_TAC		(1    <<  1)	/* Transmit Add CRC */
+#define DTXC_TE			(1    <<  0)	/* TX Enable */
+
+/* DMA Receive Control Register */
+#define DRXC_RBS		(0x3f << 24)	/* Receive Burst Size */
+#define DRXC_RUCC		(1    << 18)	/* Receive UDP Checksum check */
+#define DRXC_RTCG		(1    << 17)	/* Receive TCP Checksum check */
+#define DRXC_RICG		(1    << 16)	/* Receive IP Checksum check */
+#define DRXC_RFCE		(1    <<  9)	/* Receive Flow Control
+						 * Enable
+						 */
+#define DRXC_RB			(1    <<  6)	/* Receive Broadcast */
+#define DRXC_RM			(1    <<  5)	/* Receive Multicast */
+#define DRXC_RU			(1    <<  4)	/* Receive Unicast */
+#define DRXC_RERR		(1    <<  3)	/* Receive Error Frame */
+#define DRXC_RA			(1    <<  2)	/* Receive All */
+#define DRXC_RE			(1    <<  0)	/* RX Enable */
+
+/* Additional Station Address High */
+#define AAH_E			(1    << 31)	/* Address Enabled */
+
+#endif /* KS8695NET_H */