Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

Conflicts:
	drivers/net/wireless/libertas/scan.c

5 files changed, 5 insertions, 97 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index d1bab141508..28ffe4c826d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -681,19 +681,13 @@ static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
 		snr = rx_stats_sig_avg / rx_stats_noise_diff;
 		rx_status.noise = rx_status.signal -
 					iwl3945_calc_db_from_ratio(snr);
-		rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
-							 rx_status.noise);
-
-	/* If noise info not available, calculate signal quality indicator (%)
-	 *   using just the dBm signal level. */
 	} else {
 		rx_status.noise = priv->last_rx_noise;
-		rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
 	}
 
 
-	IWL_DEBUG_STATS(priv, "Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
-			rx_status.signal, rx_status.noise, rx_status.qual,
+	IWL_DEBUG_STATS(priv, "Rssi %d noise %d sig_avg %d noise_diff %d\n",
+			rx_status.signal, rx_status.noise,
 			rx_stats_sig_avg, rx_stats_noise_diff);
 
 	header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index 28f6eb5f2cb..3ec2fe370b5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -222,7 +222,6 @@ struct iwl3945_ibss_seq {
  *
  *****************************************************************************/
 extern int iwl3945_calc_db_from_ratio(int sig_ratio);
-extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm);
 extern void iwl3945_rx_replenish(void *data);
 extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
 extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index fe511cbf012..b93e4915819 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -150,7 +150,7 @@ static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = {
 };
 
 /* mbps, mcs */
-const static struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
+static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
 	{  "1", "BPSK DSSS"},
 	{  "2", "QPSK DSSS"},
 	{"5.5", "BPSK CCK"},
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index f5c87e72660..6f36b6e79f5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -650,47 +650,6 @@ void iwl_reply_statistics(struct iwl_priv *priv,
 }
 EXPORT_SYMBOL(iwl_reply_statistics);
 
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95)   /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- *   about formulas used below. */
-static int iwl_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
-	int sig_qual;
-	int degradation = PERFECT_RSSI - rssi_dbm;
-
-	/* If we get a noise measurement, use signal-to-noise ratio (SNR)
-	 * as indicator; formula is (signal dbm - noise dbm).
-	 * SNR at or above 40 is a great signal (100%).
-	 * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
-	 * Weakest usable signal is usually 10 - 15 dB SNR. */
-	if (noise_dbm) {
-		if (rssi_dbm - noise_dbm >= 40)
-			return 100;
-		else if (rssi_dbm < noise_dbm)
-			return 0;
-		sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
-	/* Else use just the signal level.
-	 * This formula is a least squares fit of data points collected and
-	 *   compared with a reference system that had a percentage (%) display
-	 *   for signal quality. */
-	} else
-		sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
-			    (15 * RSSI_RANGE + 62 * degradation)) /
-			   (RSSI_RANGE * RSSI_RANGE);
-
-	if (sig_qual > 100)
-		sig_qual = 100;
-	else if (sig_qual < 1)
-		sig_qual = 0;
-
-	return sig_qual;
-}
-
 /* Calc max signal level (dBm) among 3 possible receivers */
 static inline int iwl_calc_rssi(struct iwl_priv *priv,
 				struct iwl_rx_phy_res *rx_resp)
@@ -1101,11 +1060,8 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 	if (iwl_is_associated(priv) &&
 	    !test_bit(STATUS_SCANNING, &priv->status)) {
 		rx_status.noise = priv->last_rx_noise;
-		rx_status.qual = iwl_calc_sig_qual(rx_status.signal,
-							 rx_status.noise);
 	} else {
 		rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
-		rx_status.qual = iwl_calc_sig_qual(rx_status.signal, 0);
 	}
 
 	/* Reset beacon noise level if not associated. */
@@ -1118,8 +1074,8 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 		iwl_dbg_report_frame(priv, phy_res, len, header, 1);
 #endif
 	iwl_dbg_log_rx_data_frame(priv, len, header);
-	IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n",
-		rx_status.signal, rx_status.noise, rx_status.qual,
+	IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, TSF %llu\n",
+		rx_status.signal, rx_status.noise,
 		(unsigned long long)rx_status.mactime);
 
 	/*
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 6533122ed87..10b0aa8024c 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1299,47 +1299,6 @@ int iwl3945_calc_db_from_ratio(int sig_ratio)
 	return (int)ratio2dB[sig_ratio];
 }
 
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95)   /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- *   about formulas used below. */
-int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
-	int sig_qual;
-	int degradation = PERFECT_RSSI - rssi_dbm;
-
-	/* If we get a noise measurement, use signal-to-noise ratio (SNR)
-	 * as indicator; formula is (signal dbm - noise dbm).
-	 * SNR at or above 40 is a great signal (100%).
-	 * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
-	 * Weakest usable signal is usually 10 - 15 dB SNR. */
-	if (noise_dbm) {
-		if (rssi_dbm - noise_dbm >= 40)
-			return 100;
-		else if (rssi_dbm < noise_dbm)
-			return 0;
-		sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
-	/* Else use just the signal level.
-	 * This formula is a least squares fit of data points collected and
-	 *   compared with a reference system that had a percentage (%) display
-	 *   for signal quality. */
-	} else
-		sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
-			    (15 * RSSI_RANGE + 62 * degradation)) /
-			   (RSSI_RANGE * RSSI_RANGE);
-
-	if (sig_qual > 100)
-		sig_qual = 100;
-	else if (sig_qual < 1)
-		sig_qual = 0;
-
-	return sig_qual;
-}
-
 /**
  * iwl3945_rx_handle - Main entry function for receiving responses from uCode
  *