Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits)
  pcmcia: ioctl-internal definitions
  pcmcia: cistpl header cleanup
  pcmcia: remove unused argument to pcmcia_parse_tuple()
  pcmcia: card services header cleanup
  pcmcia: device_id header cleanup
  pcmcia: encapsulate ioaddr_t
  pcmcia: cleanup device driver header file
  pcmcia: cleanup socket services header file
  pcmcia: merge ds_internal.h into cs_internal.h
  pcmcia: cleanup cs_internal.h
  pcmcia: cs_internal.h is internal
  pcmcia: use dev_printk for cs_error()
  pcmcia: remove CS_ error codes alltogether
  pcmcia: deprecate CS_BAD_TUPLE
  pcmcia: deprecate CS_BAD_ARGS
  pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE
  pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE
  pcmcia: deprecate CS_NO_MORE_ITEMS
  pcmcia: deprecate CS_IN_USE
  pcmcia: deprecate CS_CONFIGURATION_LOCKED
  ...

Fix trivial conflict in drivers/pcmcia/ds.c manually

11 files changed, 429 insertions, 523 deletions

diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index fd72e427cb2..27696c20f4c 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -206,126 +206,123 @@ static void airo_detach(struct pcmcia_device *link)
 #define CS_CHECK(fn, ret) \
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
+static int airo_cs_config_check(struct pcmcia_device *p_dev,
+				cistpl_cftable_entry_t *cfg,
+				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
+				void *priv_data)
+{
+	win_req_t *req = priv_data;
+
+	if (cfg->index == 0)
+		return -ENODEV;
+
+	/* Does this card need audio output? */
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->conf.Status = CCSR_AUDIO_ENA;
+	}
+
+	/* Use power settings for Vcc and Vpp if present */
+	/*  Note that the CIS values need to be rescaled */
+	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+	/* Do we need to allocate an interrupt? */
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+	}
+
+	/* This reserves IO space but doesn't actually enable it */
+	if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+		return -ENODEV;
+
+	/*
+	  Now set up a common memory window, if needed.  There is room
+	  in the struct pcmcia_device structure for one memory window handle,
+	  but if the base addresses need to be saved, or if multiple
+	  windows are needed, the info should go in the private data
+	  structure for this device.
+
+	  Note that the memory window base is a physical address, and
+	  needs to be mapped to virtual space with ioremap() before it
+	  is used.
+	*/
+	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+		cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
+		memreq_t map;
+		req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+		req->Base = mem->win[0].host_addr;
+		req->Size = mem->win[0].len;
+		req->AccessSpeed = 0;
+		if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
+			return -ENODEV;
+		map.Page = 0;
+		map.CardOffset = mem->win[0].card_addr;
+		if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
+			return -ENODEV;
+	}
+	/* If we got this far, we're cool! */
+	return 0;
+}
+
+
 static int airo_config(struct pcmcia_device *link)
 {
-	tuple_t tuple;
-	cisparse_t parse;
 	local_info_t *dev;
+	win_req_t *req;
 	int last_fn, last_ret;
-	u_char buf[64];
-	win_req_t req;
-	memreq_t map;
 
 	dev = link->priv;
 
 	DEBUG(0, "airo_config(0x%p)\n", link);
 
+	req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	/*
+	 * In this loop, we scan the CIS for configuration table
+	 * entries, each of which describes a valid card
+	 * configuration, including voltage, IO window, memory window,
+	 * and interrupt settings.
+	 *
+	 * We make no assumptions about the card to be configured: we
+	 * use just the information available in the CIS.  In an ideal
+	 * world, this would work for any PCMCIA card, but it requires
+	 * a complete and accurate CIS.  In practice, a driver usually
+	 * "knows" most of these things without consulting the CIS,
+	 * and most client drivers will only use the CIS to fill in
+	 * implementation-defined details.
+	 */
+	last_ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+	if (last_ret)
+		goto failed;
+
 	/*
-	  In this loop, we scan the CIS for configuration table entries,
-	  each of which describes a valid card configuration, including
-	  voltage, IO window, memory window, and interrupt settings.
-	  
-	  We make no assumptions about the card to be configured: we use
-	  just the information available in the CIS.  In an ideal world,
-	  this would work for any PCMCIA card, but it requires a complete
-	  and accurate CIS.  In practice, a driver usually "knows" most of
-	  these things without consulting the CIS, and most client drivers
-	  will only use the CIS to fill in implementation-defined details.
+	  Allocate an interrupt line.  Note that this does not assign a
+	  handler to the interrupt, unless the 'Handler' member of the
+	  irq structure is initialized.
 	*/
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-	while (1) {
-		cistpl_cftable_entry_t dflt = { 0 };
-		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-		if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
-				pcmcia_parse_tuple(link, &tuple, &parse) != 0)
-			goto next_entry;
-		
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
-		if (cfg->index == 0) goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-		
-		/* Does this card need audio output? */
-		if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-			link->conf.Attributes |= CONF_ENABLE_SPKR;
-			link->conf.Status = CCSR_AUDIO_ENA;
-		}
-		
-		/* Use power settings for Vcc and Vpp if present */
-		/*  Note that the CIS values need to be rescaled */
-		if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-				cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-		else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-				dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-		
-		/* Do we need to allocate an interrupt? */
-		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-		
-		/* IO window settings */
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 = link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-		}
-		
-		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(link, &link->io) != 0)
-			goto next_entry;
-		
-		/*
-		  Now set up a common memory window, if needed.  There is room
-		  in the struct pcmcia_device structure for one memory window handle,
-		  but if the base addresses need to be saved, or if multiple
-		  windows are needed, the info should go in the private data
-		  structure for this device.
-		  
-		  Note that the memory window base is a physical address, and
-		  needs to be mapped to virtual space with ioremap() before it
-		  is used.
-		*/
-		if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
-			cistpl_mem_t *mem =
-				(cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
-			req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
-			req.Base = mem->win[0].host_addr;
-			req.Size = mem->win[0].len;
-			req.AccessSpeed = 0;
-			if (pcmcia_request_window(&link, &req, &link->win) != 0)
-				goto next_entry;
-			map.Page = 0; map.CardOffset = mem->win[0].card_addr;
-			if (pcmcia_map_mem_page(link->win, &map) != 0)
-				goto next_entry;
-		}
-		/* If we got this far, we're cool! */
-		break;
-		
-	next_entry:
-		CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
-	}
-	
-    /*
-      Allocate an interrupt line.  Note that this does not assign a
-      handler to the interrupt, unless the 'Handler' member of the
-      irq structure is initialized.
-    */
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
 	
@@ -362,14 +359,17 @@ static int airo_config(struct pcmcia_device *link)
 		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
 		       link->io.BasePort2+link->io.NumPorts2-1);
 	if (link->win)
-		printk(", mem 0x%06lx-0x%06lx", req.Base,
-		       req.Base+req.Size-1);
+		printk(", mem 0x%06lx-0x%06lx", req->Base,
+		       req->Base+req->Size-1);
 	printk("\n");
+	kfree(req);
 	return 0;
 
  cs_failed:
 	cs_error(link, last_fn, last_ret);
+ failed:
 	airo_release(link);
+	kfree(req);
 	return -ENODEV;
 } /* airo_config */
 
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index d2388e8d179..77406245dc7 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -224,13 +224,58 @@ static int card_present(void *arg)
 	return 0;
 }
 
+static int atmel_config_check(struct pcmcia_device *p_dev,
+			      cistpl_cftable_entry_t *cfg,
+			      cistpl_cftable_entry_t *dflt,
+			      unsigned int vcc,
+			      void *priv_data)
+{
+	if (cfg->index == 0)
+		return -ENODEV;
+
+	/* Does this card need audio output? */
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->conf.Status = CCSR_AUDIO_ENA;
+	}
+
+	/* Use power settings for Vcc and Vpp if present */
+	/*  Note that the CIS values need to be rescaled */
+	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+	/* Do we need to allocate an interrupt? */
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+	}
+
+	/* This reserves IO space but doesn't actually enable it */
+	return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
 static int atmel_config(struct pcmcia_device *link)
 {
-	tuple_t tuple;
-	cisparse_t parse;
 	local_info_t *dev;
 	int last_fn, last_ret;
-	u_char buf[64];
 	struct pcmcia_device_id *did;
 
 	dev = link->priv;
@@ -238,11 +283,6 @@ static int atmel_config(struct pcmcia_device *link)
 
 	DEBUG(0, "atmel_config(0x%p)\n", link);
 
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-
 	/*
 	  In this loop, we scan the CIS for configuration table entries,
 	  each of which describes a valid card configuration, including
@@ -255,66 +295,8 @@ static int atmel_config(struct pcmcia_device *link)
 	  these things without consulting the CIS, and most client drivers
 	  will only use the CIS to fill in implementation-defined details.
 	*/
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-	while (1) {
-		cistpl_cftable_entry_t dflt = { 0 };
-		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-		if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
-				pcmcia_parse_tuple(link, &tuple, &parse) != 0)
-			goto next_entry;
-
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
-		if (cfg->index == 0) goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-
-		/* Does this card need audio output? */
-		if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-			link->conf.Attributes |= CONF_ENABLE_SPKR;
-			link->conf.Status = CCSR_AUDIO_ENA;
-		}
-
-		/* Use power settings for Vcc and Vpp if present */
-		/*  Note that the CIS values need to be rescaled */
-		if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-				cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-		else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-				dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
-		/* Do we need to allocate an interrupt? */
-		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-		/* IO window settings */
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 = link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-		}
-
-		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(link, &link->io) != 0)
-			goto next_entry;
-
-		/* If we got this far, we're cool! */
-		break;
-
-	next_entry:
-		CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
-	}
+	if (pcmcia_loop_config(link, atmel_config_check, NULL))
+		goto failed;
 
 	/*
 	  Allocate an interrupt line.  Note that this does not assign a
@@ -360,6 +342,7 @@ static int atmel_config(struct pcmcia_device *link)
 
  cs_failed:
 	cs_error(link, last_fn, last_ret);
+ failed:
 	atmel_release(link);
 	return -ENODEV;
 }
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index b8aa16307f7..3cfc30307a2 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -82,13 +82,13 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	tuple.TupleOffset = 0;
 
 	res = pcmcia_get_first_tuple(dev, &tuple);
-	if (res != CS_SUCCESS)
+	if (res != 0)
 		goto err_kfree_ssb;
 	res = pcmcia_get_tuple_data(dev, &tuple);
-	if (res != CS_SUCCESS)
+	if (res != 0)
 		goto err_kfree_ssb;
-	res = pcmcia_parse_tuple(dev, &tuple, &parse);
-	if (res != CS_SUCCESS)
+	res = pcmcia_parse_tuple(&tuple, &parse);
+	if (res != 0)
 		goto err_kfree_ssb;
 
 	dev->conf.ConfigBase = parse.config.base;
@@ -107,13 +107,13 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	win.Size = SSB_CORE_SIZE;
 	win.AccessSpeed = 250;
 	res = pcmcia_request_window(&dev, &win, &dev->win);
-	if (res != CS_SUCCESS)
+	if (res != 0)
 		goto err_kfree_ssb;
 
 	mem.CardOffset = 0;
 	mem.Page = 0;
 	res = pcmcia_map_mem_page(dev->win, &mem);
-	if (res != CS_SUCCESS)
+	if (res != 0)
 		goto err_disable;
 
 	dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
@@ -121,11 +121,11 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	dev->irq.Handler = NULL; /* The handler is registered later. */
 	dev->irq.Instance = NULL;
 	res = pcmcia_request_irq(dev, &dev->irq);
-	if (res != CS_SUCCESS)
+	if (res != 0)
 		goto err_disable;
 
 	res = pcmcia_request_configuration(dev, &dev->conf);
-	if (res != CS_SUCCESS)
+	if (res != 0)
 		goto err_disable;
 
 	err = ssb_bus_pcmciabus_register(ssb, dev, win.Base);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 3b4e55cf33c..63374027735 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -234,7 +234,7 @@ static void sandisk_set_iobase(local_info_t *local)
 	reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
 		       " res=%d\n", res);
 	}
@@ -246,7 +246,7 @@ static void sandisk_set_iobase(local_info_t *local)
 	reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
 		       " res=%d\n", res);
 	}
@@ -305,7 +305,7 @@ static int sandisk_enable_wireless(struct net_device *dev)
 	tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
 	if (pcmcia_get_first_tuple(hw_priv->link, &tuple) ||
 	    pcmcia_get_tuple_data(hw_priv->link, &tuple) ||
-	    pcmcia_parse_tuple(hw_priv->link, &tuple, parse) ||
+	    pcmcia_parse_tuple(&tuple, parse) ||
 		parse->longlink_mfc.nfn < 2) {
 		/* No multi-function links found */
 		ret = -ENODEV;
@@ -322,7 +322,7 @@ static int sandisk_enable_wireless(struct net_device *dev)
 	reg.Value = COR_SOFT_RESET;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
 		       dev->name, res);
 		goto done;
@@ -339,7 +339,7 @@ static int sandisk_enable_wireless(struct net_device *dev)
 	reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
 		       dev->name, res);
 		goto done;
@@ -374,7 +374,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
 	reg.Value = 0;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
 		       res);
 		return;
@@ -386,7 +386,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
 	reg.Value |= COR_SOFT_RESET;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
 		       res);
 		return;
@@ -399,7 +399,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
 		reg.Value |= COR_IREQ_ENA;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
 		       res);
 		return;
@@ -433,7 +433,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 	reg.Value = 0;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
 		       "(%d)\n", res);
 		return;
@@ -446,7 +446,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 	reg.Value |= COR_SOFT_RESET;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
 		       "(%d)\n", res);
 		return;
@@ -460,7 +460,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 	reg.Offset = CISREG_CCSR;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
 		       "(%d)\n", res);
 		return;
@@ -472,7 +472,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 	reg.Value = old_cor & ~COR_SOFT_RESET;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
 		       "(%d)\n", res);
 		return;
@@ -532,145 +532,118 @@ static void prism2_detach(struct pcmcia_device *link)
 #define CS_CHECK(fn, ret) \
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
-#define CFG_CHECK2(fn, retf) \
-do { int _ret = (retf); \
-if (_ret != 0) { \
-	PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \
-	cs_error(link, fn, _ret); \
-	goto next_entry; \
-} \
-} while (0)
-
 
 /* run after a CARD_INSERTION event is received to configure the PCMCIA
  * socket and make the device available to the system */
+
+static int prism2_config_check(struct pcmcia_device *p_dev,
+			       cistpl_cftable_entry_t *cfg,
+			       cistpl_cftable_entry_t *dflt,
+			       unsigned int vcc,
+			       void *priv_data)
+{
+	if (cfg->index == 0)
+		return -ENODEV;
+
+	PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
+	       "(default 0x%02X)\n", cfg->index, dflt->index);
+
+	/* Does this card need audio output? */
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->conf.Status = CCSR_AUDIO_ENA;
+	}
+
+	/* Use power settings for Vcc and Vpp if present */
+	/*  Note that the CIS values need to be rescaled */
+	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
+		    10000 && !ignore_cis_vcc) {
+			PDEBUG(DEBUG_EXTRA, "  Vcc mismatch - skipping"
+			       " this entry\n");
+			return -ENODEV;
+		}
+	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
+		    10000 && !ignore_cis_vcc) {
+			PDEBUG(DEBUG_EXTRA, "  Vcc (default) mismatch "
+			       "- skipping this entry\n");
+			return -ENODEV;
+		}
+	}
+
+	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+	/* Do we need to allocate an interrupt? */
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
+		/* At least Compaq WL200 does not have IRQInfo1 set,
+		 * but it does not work without interrupts.. */
+		printk(KERN_WARNING "Config has no IRQ info, but trying to "
+		       "enable IRQ anyway..\n");
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	}
+
+	/* IO window settings */
+	PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
+	       "dflt->io.nwin=%d\n",
+	       cfg->io.nwin, dflt->io.nwin);
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
+		       "io.base=0x%04x, len=%d\n", io->flags,
+		       io->win[0].base, io->win[0].len);
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags &
+			CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+	}
+
+	/* This reserves IO space but doesn't actually enable it */
+	return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
 static int prism2_config(struct pcmcia_device *link)
 {
 	struct net_device *dev;
 	struct hostap_interface *iface;
 	local_info_t *local;
 	int ret = 1;
-	tuple_t tuple;
-	cisparse_t *parse;
 	int last_fn, last_ret;
-	u_char buf[64];
-	config_info_t conf;
-	cistpl_cftable_entry_t dflt = { 0 };
 	struct hostap_cs_priv *hw_priv;
 
 	PDEBUG(DEBUG_FLOW, "prism2_config()\n");
 
-	parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
 	hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
-	if (parse == NULL || hw_priv == NULL) {
+	if (hw_priv == NULL) {
 		ret = -ENOMEM;
 		goto failed;
 	}
 
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-
-	CS_CHECK(GetConfigurationInfo,
-		 pcmcia_get_configuration_info(link, &conf));
-
 	/* Look for an appropriate configuration table entry in the CIS */
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-	for (;;) {
-		cistpl_cftable_entry_t *cfg = &(parse->cftable_entry);
-		CFG_CHECK2(GetTupleData,
-			   pcmcia_get_tuple_data(link, &tuple));
-		CFG_CHECK2(ParseTuple,
-			   pcmcia_parse_tuple(link, &tuple, parse));
-
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-			dflt = *cfg;
-		if (cfg->index == 0)
-			goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-		PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
-		       "(default 0x%02X)\n", cfg->index, dflt.index);
-
-		/* Does this card need audio output? */
-		if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-			link->conf.Attributes |= CONF_ENABLE_SPKR;
-			link->conf.Status = CCSR_AUDIO_ENA;
-		}
-
-		/* Use power settings for Vcc and Vpp if present */
-		/*  Note that the CIS values need to be rescaled */
-		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
-			    10000 && !ignore_cis_vcc) {
-				PDEBUG(DEBUG_EXTRA, "  Vcc mismatch - skipping"
-				       " this entry\n");
-				goto next_entry;
-			}
-		} else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] /
-			    10000 && !ignore_cis_vcc) {
-				PDEBUG(DEBUG_EXTRA, "  Vcc (default) mismatch "
-				       "- skipping this entry\n");
-				goto next_entry;
-			}
-		}
-
-		if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-				cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-		else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-				dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-		/* Do we need to allocate an interrupt? */
-		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-		else if (!(link->conf.Attributes & CONF_ENABLE_IRQ)) {
-			/* At least Compaq WL200 does not have IRQInfo1 set,
-			 * but it does not work without interrupts.. */
-			printk("Config has no IRQ info, but trying to enable "
-			       "IRQ anyway..\n");
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-		}
-
-		/* IO window settings */
-		PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
-		       "dflt.io.nwin=%d\n",
-		       cfg->io.nwin, dflt.io.nwin);
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
-			       "io.base=0x%04x, len=%d\n", io->flags,
-			       io->win[0].base, io->win[0].len);
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.IOAddrLines = io->flags &
-				CISTPL_IO_LINES_MASK;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 = link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-		}
-
-		/* This reserves IO space but doesn't actually enable it */
-		CFG_CHECK2(RequestIO,
-			   pcmcia_request_io(link, &link->io));
-
-		/* This configuration table entry is OK */
-		break;
-
-	next_entry:
-		CS_CHECK(GetNextTuple,
-			 pcmcia_get_next_tuple(link, &tuple));
+	last_ret = pcmcia_loop_config(link, prism2_config_check, NULL);
+	if (last_ret) {
+		if (!ignore_cis_vcc)
+			printk(KERN_ERR "GetNextTuple(): No matching "
+			       "CIS configuration.  Maybe you need the "
+			       "ignore_cis_vcc=1 parameter.\n");
+		cs_error(link, RequestIO, last_ret);
+		goto failed;
 	}
 
 	/* Need to allocate net_device before requesting IRQ handler */
@@ -738,14 +711,12 @@ static int prism2_config(struct pcmcia_device *link)
 		if (ret == 0 && local->ddev)
 			strcpy(hw_priv->node.dev_name, local->ddev->name);
 	}
-	kfree(parse);
 	return ret;
 
  cs_failed:
 	cs_error(link, last_fn, last_ret);
 
  failed:
-	kfree(parse);
 	kfree(hw_priv);
 	prism2_release((u_long)link);
 	return ret;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index e3505c110af..842a08d1f10 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -791,7 +791,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 	if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 ||
 	    (ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 ||
-	    (ret = pcmcia_parse_tuple(p_dev, &tuple, &parse)) != 0)
+	    (ret = pcmcia_parse_tuple(&tuple, &parse)) != 0)
 	{
 		lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
 		goto out1;
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index 25bae7933aa..a670f36b5f3 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -749,9 +749,10 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
     for (i = j = 0x0; j < 0x400; j += 0x20) {
 	link->io.BasePort1 = j ^ 0x300;
 	i = pcmcia_request_io(link, &link->io);
-	if (i == CS_SUCCESS) break;
+	if (i == 0)
+		break;
     }
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
 	cs_error(link, RequestIO, i);
 	goto failed;
     }
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 9eaa252c243..e585684e59a 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -80,7 +80,7 @@ orinoco_cs_hard_reset(struct orinoco_private *priv)
 	/* We need atomic ops here, because we're not holding the lock */
 	set_bit(0, &card->hard_reset_in_progress);
 
-	err = pcmcia_reset_card(link, NULL);
+	err = pcmcia_reset_card(link->socket);
 	if (err)
 		return err;
 
@@ -165,6 +165,70 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
 		last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
 	} while (0)
 
+static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
+				   cistpl_cftable_entry_t *cfg,
+				   cistpl_cftable_entry_t *dflt,
+				   unsigned int vcc,
+				   void *priv_data)
+{
+	if (cfg->index == 0)
+		goto next_entry;
+
+	/* Use power settings for Vcc and Vpp if present */
+	/* Note that the CIS values need to be rescaled */
+	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+			if (!ignore_cis_vcc)
+				goto next_entry;
+		}
+	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+			if (!ignore_cis_vcc)
+				goto next_entry;
+		}
+	}
+
+	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp =
+			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp =
+			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+	/* Do we need to allocate an interrupt? */
+	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+
+		/* This reserves IO space but doesn't actually enable it */
+		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+			goto next_entry;
+	}
+	return 0;
+
+next_entry:
+	pcmcia_disable_device(p_dev);
+	return -ENODEV;
+};
+
 static int
 orinoco_cs_config(struct pcmcia_device *link)
 {
@@ -173,16 +237,8 @@ orinoco_cs_config(struct pcmcia_device *link)
 	struct orinoco_pccard *card = priv->card;
 	hermes_t *hw = &priv->hw;
 	int last_fn, last_ret;
-	u_char buf[64];
-	config_info_t conf;
-	tuple_t tuple;
-	cisparse_t parse;
 	void __iomem *mem;
 
-	/* Look up the current Vcc */
-	CS_CHECK(GetConfigurationInfo,
-		 pcmcia_get_configuration_info(link, &conf));
-
 	/*
 	 * In this loop, we scan the CIS for configuration table
 	 * entries, each of which describes a valid card
@@ -197,94 +253,14 @@ orinoco_cs_config(struct pcmcia_device *link)
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-	while (1) {
-		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-		cistpl_cftable_entry_t dflt = { .index = 0 };
-
-		if ( (pcmcia_get_tuple_data(link, &tuple) != 0)
-		    || (pcmcia_parse_tuple(link, &tuple, &parse) != 0))
-			goto next_entry;
-
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-			dflt = *cfg;
-		if (cfg->index == 0)
-			goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-
-		/* Use power settings for Vcc and Vpp if present */
-		/* Note that the CIS values need to be rescaled */
-		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-				DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n",  conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
-				if (!ignore_cis_vcc)
-					goto next_entry;
-			}
-		} else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
-				DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n",  conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
-				if(!ignore_cis_vcc)
-					goto next_entry;
-			}
-		}
-
-		if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-			    cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-		else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-			    dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-		
-		/* Do we need to allocate an interrupt? */
-		link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-		/* IO window settings */
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io =
-			    (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 =
-				    IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 =
-				    IO_DATA_PATH_WIDTH_8;
-			link->io.IOAddrLines =
-			    io->flags & CISTPL_IO_LINES_MASK;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 =
-				    link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-
-			/* This reserves IO space but doesn't actually enable it */
-			if (pcmcia_request_io(link, &link->io) != 0)
-				goto next_entry;
-		}
-
-
-		/* If we got this far, we're cool! */
-
-		break;
-		
-	next_entry:
-		pcmcia_disable_device(link);
-		last_ret = pcmcia_get_next_tuple(link, &tuple);
-		if (last_ret  == CS_NO_MORE_ITEMS) {
+	last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
+	if (last_ret) {
+		if (!ignore_cis_vcc)
 			printk(KERN_ERR PFX "GetNextTuple(): No matching "
 			       "CIS configuration.  Maybe you need the "
 			       "ignore_cis_vcc=1 parameter.\n");
-			goto cs_failed;
-		}
+		cs_error(link, RequestIO, last_ret);
+		goto failed;
 	}
 
 	/*
@@ -335,7 +311,6 @@ orinoco_cs_config(struct pcmcia_device *link)
 	       "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
 	       link->irq.AssignedIRQ, link->io.BasePort1,
 	       link->io.BasePort1 + link->io.NumPorts1 - 1);
-
 	return 0;
 
  cs_failed:
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 44da0d19b5c..1404a571752 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -798,9 +798,9 @@ static void ray_release(struct pcmcia_device *link)
     iounmap(local->amem);
     /* Do bother checking to see if these succeed or not */
     i = pcmcia_release_window(local->amem_handle);
-    if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i);
+    if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i);
     i = pcmcia_release_window(local->rmem_handle);
-    if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i);
+    if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i);
     pcmcia_disable_device(link);
 
     DEBUG(2,"ray_release ending\n");
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 67b26d3c3cd..b0c71c3be46 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -235,6 +235,70 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
  * device available to the system.
  */
 
+static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
+				    cistpl_cftable_entry_t *cfg,
+				    cistpl_cftable_entry_t *dflt,
+				    unsigned int vcc,
+				    void *priv_data)
+{
+	if (cfg->index == 0)
+		goto next_entry;
+
+	/* Use power settings for Vcc and Vpp if present */
+	/* Note that the CIS values need to be rescaled */
+	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+			if (!ignore_cis_vcc)
+				goto next_entry;
+		}
+	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+			if (!ignore_cis_vcc)
+				goto next_entry;
+		}
+	}
+
+	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp =
+			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp =
+			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+	/* Do we need to allocate an interrupt? */
+	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+
+		/* This reserves IO space but doesn't actually enable it */
+		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+			goto next_entry;
+	}
+	return 0;
+
+next_entry:
+	pcmcia_disable_device(p_dev);
+	return -ENODEV;
+};
+
 static int
 spectrum_cs_config(struct pcmcia_device *link)
 {
@@ -243,16 +307,8 @@ spectrum_cs_config(struct pcmcia_device *link)
 	struct orinoco_pccard *card = priv->card;
 	hermes_t *hw = &priv->hw;
 	int last_fn, last_ret;
-	u_char buf[64];
-	config_info_t conf;
-	tuple_t tuple;
-	cisparse_t parse;
 	void __iomem *mem;
 
-	/* Look up the current Vcc */
-	CS_CHECK(GetConfigurationInfo,
-		 pcmcia_get_configuration_info(link, &conf));
-
 	/*
 	 * In this loop, we scan the CIS for configuration table
 	 * entries, each of which describes a valid card
@@ -267,94 +323,14 @@ spectrum_cs_config(struct pcmcia_device *link)
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-	while (1) {
-		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-		cistpl_cftable_entry_t dflt = { .index = 0 };
-
-		if ( (pcmcia_get_tuple_data(link, &tuple) != 0)
-		    || (pcmcia_parse_tuple(link, &tuple, &parse) != 0))
-			goto next_entry;
-
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-			dflt = *cfg;
-		if (cfg->index == 0)
-			goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-
-		/* Use power settings for Vcc and Vpp if present */
-		/* Note that the CIS values need to be rescaled */
-		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-				DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n",  conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
-				if (!ignore_cis_vcc)
-					goto next_entry;
-			}
-		} else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
-				DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n",  conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
-				if(!ignore_cis_vcc)
-					goto next_entry;
-			}
-		}
-
-		if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-			    cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-		else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-			    dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-		
-		/* Do we need to allocate an interrupt? */
-		link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-		/* IO window settings */
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io =
-			    (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 =
-				    IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 =
-				    IO_DATA_PATH_WIDTH_8;
-			link->io.IOAddrLines =
-			    io->flags & CISTPL_IO_LINES_MASK;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 =
-				    link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-
-			/* This reserves IO space but doesn't actually enable it */
-			if (pcmcia_request_io(link, &link->io) != 0)
-				goto next_entry;
-		}
-
-
-		/* If we got this far, we're cool! */
-
-		break;
-		
-	next_entry:
-		pcmcia_disable_device(link);
-		last_ret = pcmcia_get_next_tuple(link, &tuple);
-		if (last_ret  == CS_NO_MORE_ITEMS) {
+	last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
+	if (last_ret) {
+		if (!ignore_cis_vcc)
 			printk(KERN_ERR PFX "GetNextTuple(): No matching "
 			       "CIS configuration.  Maybe you need the "
 			       "ignore_cis_vcc=1 parameter.\n");
-			goto cs_failed;
-		}
+		cs_error(link, RequestIO, last_ret);
+		goto failed;
 	}
 
 	/*
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index b5de38a9b79..e124b1d6267 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3702,7 +3702,7 @@ wv_pcmcia_reset(struct net_device *	dev)
 #endif
 
   i = pcmcia_access_configuration_register(link, &reg);
-  if(i != CS_SUCCESS)
+  if (i != 0)
     {
       cs_error(link, AccessConfigurationRegister, i);
       return FALSE;
@@ -3716,7 +3716,7 @@ wv_pcmcia_reset(struct net_device *	dev)
   reg.Action = CS_WRITE;
   reg.Value = reg.Value | COR_SW_RESET;
   i = pcmcia_access_configuration_register(link, &reg);
-  if(i != CS_SUCCESS)
+  if (i != 0)
     {
       cs_error(link, AccessConfigurationRegister, i);
       return FALSE;
@@ -3725,7 +3725,7 @@ wv_pcmcia_reset(struct net_device *	dev)
   reg.Action = CS_WRITE;
   reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
   i = pcmcia_access_configuration_register(link, &reg);
-  if(i != CS_SUCCESS)
+  if (i != 0)
     {
       cs_error(link, AccessConfigurationRegister, i);
       return FALSE;
@@ -3903,7 +3903,7 @@ wv_pcmcia_config(struct pcmcia_device *	link)
   do
     {
       i = pcmcia_request_io(link, &link->io);
-      if(i != CS_SUCCESS)
+      if (i != 0)
 	{
 	  cs_error(link, RequestIO, i);
 	  break;
@@ -3914,7 +3914,7 @@ wv_pcmcia_config(struct pcmcia_device *	link)
        * actually assign a handler to the interrupt.
        */
       i = pcmcia_request_irq(link, &link->irq);
-      if(i != CS_SUCCESS)
+      if (i != 0)
 	{
 	  cs_error(link, RequestIRQ, i);
 	  break;
@@ -3926,7 +3926,7 @@ wv_pcmcia_config(struct pcmcia_device *	link)
        */
       link->conf.ConfigIndex = 1;
       i = pcmcia_request_configuration(link, &link->conf);
-      if(i != CS_SUCCESS)
+      if (i != 0)
 	{
 	  cs_error(link, RequestConfiguration, i);
 	  break;
@@ -3942,7 +3942,7 @@ wv_pcmcia_config(struct pcmcia_device *	link)
       req.Base = req.Size = 0;
       req.AccessSpeed = mem_speed;
       i = pcmcia_request_window(&link, &req, &link->win);
-      if(i != CS_SUCCESS)
+      if (i != 0)
 	{
 	  cs_error(link, RequestWindow, i);
 	  break;
@@ -3954,7 +3954,7 @@ wv_pcmcia_config(struct pcmcia_device *	link)
 
       mem.CardOffset = 0; mem.Page = 0;
       i = pcmcia_map_mem_page(link->win, &mem);
-      if(i != CS_SUCCESS)
+      if (i != 0)
 	{
 	  cs_error(link, MapMemPage, i);
 	  break;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 74a5ad2f122..68789c6e1ce 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1977,10 +1977,10 @@ static int wl3501_config(struct pcmcia_device *link)
 		link->io.BasePort1 = j;
 		link->io.BasePort2 = link->io.BasePort1 + 0x10;
 		i = pcmcia_request_io(link, &link->io);
-		if (i == CS_SUCCESS)
+		if (i == 0)
 			break;
 	}
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestIO, i);
 		goto failed;
 	}