mac80211: use hardware flags for signal/noise units

trying to clean up the signal/noise code. the previous code in mac80211 had
confusing names for the related variables, did not have much definition of
what units of signal and noise were provided and used implicit mechanisms from
the wireless extensions.

this patch introduces hardware capability flags to let the hardware specify
clearly if it can provide signal and noise level values and which units it can
provide. this also anticipates possible new units like RCPI in the future.

for signal:

  IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific
  IEEE80211_HW_SIGNAL_DB     - dB difference to unspecified reference point
  IEEE80211_HW_SIGNAL_DBM    - dBm, difference to 1mW

for noise we currently only have dBm:

  IEEE80211_HW_NOISE_DBM     - dBm, difference to 1mW

if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has
to provide the maximum value (max_signal) it reports in order for applications
to make sense of the signal values.

i tried my best to find out for each driver what it can provide and update it
but i'm not sure (?) for some of them and used the more conservative guess in
doubt. this can be fixed easily after this patch has been merged by changing
the hardware flags of the driver.

DRIVER          SIGNAL    MAX	NOISE   QUAL
-----------------------------------------------------------------
adm8211         unspec(?) 100   n/a     missing
at76_usb        unspec(?) (?)   unused  missing
ath5k           dBm             dBm     percent rssi
b43legacy       dBm             dBm     percent jssi(?)
b43             dBm             dBm     percent jssi(?)
iwl-3945        dBm             dBm     percent snr+more
iwl-4965        dBm             dBm     percent snr+more
p54             unspec    127   n/a     missing
rt2x00          dBm	        n/a     percent rssi+tx/rx frame success
  rt2400        dBm             n/a
  rt2500pci     dBm             n/a
  rt2500usb     dBm             n/a
  rt61pci       dBm             n/a
  rt73usb       dBm             n/a
rtl8180         unspec(?) 65    n/a     (?)
rtl8187         unspec(?) 65    (?)     noise(?)
zd1211          dB(?)     100   n/a     percent

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

20 files changed, 77 insertions, 107 deletions

diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index d93a1de77eb..7af5d8851f6 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -445,9 +445,9 @@ static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
 			struct ieee80211_rx_status rx_status = {0};
 
 			if (priv->pdev->revision < ADM8211_REV_CA)
-				rx_status.ssi = rssi;
+				rx_status.signal = rssi;
 			else
-				rx_status.ssi = 100 - rssi;
+				rx_status.signal = 100 - rssi;
 
 			rx_status.rate_idx = rate;
 
@@ -1893,9 +1893,10 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
 
 	dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
 	/* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
+	dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
 
 	dev->channel_change_time = 1000;
-	dev->max_rssi = 100;	/* FIXME: find better value */
+	dev->max_signal = 100;    /* FIXME: find better value */
 
 	dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */
 
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 3201c160434..dd8adaddd7a 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -458,13 +458,11 @@ ath5k_pci_probe(struct pci_dev *pdev,
 
 	/* Initialize driver private data */
 	SET_IEEE80211_DEV(hw, &pdev->dev);
-	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS;
+	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+		    IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_NOISE_DBM;
 	hw->extra_tx_headroom = 2;
 	hw->channel_change_time = 5000;
-	/* these names are misleading */
-	hw->max_rssi = -110; /* signal in dBm */
-	hw->max_noise = -110; /* noise in dBm */
-	hw->max_signal = 100; /* we will provide a percentage based on rssi */
 	sc = hw->priv;
 	sc->hw = hw;
 	sc->pdev = pdev;
@@ -1893,20 +1891,9 @@ accept:
 		rxs.freq = sc->curchan->center_freq;
 		rxs.band = sc->curband->band;
 
-		/*
-		 * signal quality:
-		 * the names here are misleading and the usage of these
-		 * values by iwconfig makes it even worse
-		 */
-		/* noise floor in dBm, from the last noise calibration */
 		rxs.noise = sc->ah->ah_noise_floor;
-		/* signal level in dBm */
-		rxs.ssi = rxs.noise + rs.rs_rssi;
-		/*
-		 * "signal" is actually displayed as Link Quality by iwconfig
-		 * we provide a percentage based on rssi (assuming max rssi 64)
-		 */
-		rxs.signal = rs.rs_rssi * 100 / 64;
+		rxs.signal = rxs.noise + rs.rs_rssi;
+		rxs.qual = rs.rs_rssi * 100 / 64;
 
 		rxs.antenna = rs.rs_antenna;
 		rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 7c23aa8705c..fc23ba5309b 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4466,10 +4466,10 @@ static int b43_wireless_init(struct ssb_device *dev)
 
 	/* fill hw info */
 	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_RX_INCLUDES_FCS;
-	hw->max_signal = 100;
-	hw->max_rssi = -110;
-	hw->max_noise = -110;
+		    IEEE80211_HW_RX_INCLUDES_FCS |
+		    IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_NOISE_DBM;
+
 	hw->queues = b43_modparam_qos ? 4 : 1;
 	SET_IEEE80211_DEV(hw, dev->dev);
 	if (is_valid_ether_addr(sprom->et1mac))
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 88491947a20..afce9338d83 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -581,12 +581,11 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 		//      and also find out what the maximum possible value is.
 		//      Fill status.ssi and status.signal fields.
 	} else {
-		status.ssi = b43_rssi_postprocess(dev, rxhdr->jssi,
+		status.signal = b43_rssi_postprocess(dev, rxhdr->jssi,
 						  (phystat0 & B43_RX_PHYST0_OFDM),
 						  (phystat0 & B43_RX_PHYST0_GAINCTL),
 						  (phystat3 & B43_RX_PHYST3_TRSTATE));
-		/* the next line looks wrong, but is what mac80211 wants */
-		status.signal = (rxhdr->jssi * 100) / B43_RX_MAX_SSI;
+		status.qual = (rxhdr->jssi * 100) / B43_RX_MAX_SSI;
 	}
 
 	if (phystat0 & B43_RX_PHYST0_OFDM)
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index d3820dce3c4..7755c59e080 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3718,10 +3718,9 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
 
 	/* fill hw info */
 	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_RX_INCLUDES_FCS;
-	hw->max_signal = 100;
-	hw->max_rssi = -110;
-	hw->max_noise = -110;
+		    IEEE80211_HW_RX_INCLUDES_FCS |
+		    IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_NOISE_DBM;
 	hw->queues = 1; /* FIXME: hardware has more queues */
 	SET_IEEE80211_DEV(hw, dev->dev);
 	if (is_valid_ether_addr(sprom->et1mac))
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index fc83dab6e2c..bed9e041d6c 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -532,12 +532,12 @@ void b43legacy_rx(struct b43legacy_wldev *dev,
 		}
 	}
 
-	status.ssi = b43legacy_rssi_postprocess(dev, jssi,
+	status.signal = b43legacy_rssi_postprocess(dev, jssi,
 				      (phystat0 & B43legacy_RX_PHYST0_OFDM),
 				      (phystat0 & B43legacy_RX_PHYST0_GAINCTL),
 				      (phystat3 & B43legacy_RX_PHYST3_TRSTATE));
 	status.noise = dev->stats.link_noise;
-	status.signal = (jssi * 100) / B43legacy_RX_MAX_SSI;
+	status.qual = (jssi * 100) / B43legacy_RX_MAX_SSI;
 	/* change to support A PHY */
 	if (phystat0 & B43legacy_RX_PHYST0_OFDM)
 		status.rate_idx = b43legacy_plcp_get_bitrate_idx_ofdm(plcp, false);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 8464397f781..d7beeff2642 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -520,7 +520,7 @@ static void iwl3945_add_radiotap(struct iwl3945_priv *priv,
 {
 	/* First cache any information we need before we overwrite
 	 * the information provided in the skb from the hardware */
-	s8 signal = stats->ssi;
+	s8 signal = stats->signal;
 	s8 noise = 0;
 	int rate = stats->rate_idx;
 	u64 tsf = stats->mactime;
@@ -693,7 +693,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 	}
 
 	/* Convert 3945's rssi indicator to dBm */
-	rx_status.ssi = rx_stats->rssi - IWL_RSSI_OFFSET;
+	rx_status.signal = rx_stats->rssi - IWL_RSSI_OFFSET;
 
 	/* Set default noise value to -127 */
 	if (priv->last_rx_noise == 0)
@@ -712,21 +712,21 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 	 * Calculate rx_status.signal (quality indicator in %) based on SNR. */
 	if (rx_stats_noise_diff) {
 		snr = rx_stats_sig_avg / rx_stats_noise_diff;
-		rx_status.noise = rx_status.ssi -
+		rx_status.noise = rx_status.signal -
 					iwl3945_calc_db_from_ratio(snr);
-		rx_status.signal = iwl3945_calc_sig_qual(rx_status.ssi,
+		rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
 							 rx_status.noise);
 
 	/* If noise info not available, calculate signal quality indicator (%)
 	 *   using just the dBm signal level. */
 	} else {
 		rx_status.noise = priv->last_rx_noise;
-		rx_status.signal = iwl3945_calc_sig_qual(rx_status.ssi, 0);
+		rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
 	}
 
 
 	IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
-			rx_status.ssi, rx_status.noise, rx_status.signal,
+			rx_status.signal, rx_status.noise, rx_status.qual,
 			rx_stats_sig_avg, rx_stats_noise_diff);
 
 	header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
@@ -736,8 +736,8 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 	IWL_DEBUG_STATS_LIMIT("[%c] %d RSSI:%d Signal:%u, Noise:%u, Rate:%u\n",
 			      network_packet ? '*' : ' ',
 			      le16_to_cpu(rx_hdr->channel),
-			      rx_status.ssi, rx_status.ssi,
-			      rx_status.ssi, rx_status.rate_idx);
+			      rx_status.signal, rx_status.signal,
+			      rx_status.noise, rx_status.rate_idx);
 
 #ifdef CONFIG_IWL3945_DEBUG
 	if (iwl3945_debug_level & (IWL_DL_RX))
@@ -748,7 +748,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 	if (network_packet) {
 		priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp);
 		priv->last_tsf = le64_to_cpu(rx_end->timestamp);
-		priv->last_rx_rssi = rx_status.ssi;
+		priv->last_rx_rssi = rx_status.signal;
 		priv->last_rx_noise = rx_status.noise;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index b7036e01145..45cbd7789bd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2362,7 +2362,7 @@ static void iwl4965_add_radiotap(struct iwl_priv *priv,
 				 struct ieee80211_rx_status *stats,
 				 u32 ampdu_status)
 {
-	s8 signal = stats->ssi;
+	s8 signal = stats->signal;
 	s8 noise = 0;
 	int rate = stats->rate_idx;
 	u64 tsf = stats->mactime;
@@ -2963,7 +2963,7 @@ static void iwl4965_rx_reply_rx(struct iwl_priv *priv,
 	priv->ucode_beacon_time = le32_to_cpu(rx_start->beacon_time_stamp);
 
 	/* Find max signal strength (dBm) among 3 antenna/receiver chains */
-	rx_status.ssi = iwl4965_calc_rssi(priv, rx_start);
+	rx_status.signal = iwl4965_calc_rssi(priv, rx_start);
 
 	/* Meaningful noise values are available only from beacon statistics,
 	 *   which are gathered only when associated, and indicate noise
@@ -2972,11 +2972,11 @@ static void iwl4965_rx_reply_rx(struct iwl_priv *priv,
 	if (iwl_is_associated(priv) &&
 	    !test_bit(STATUS_SCANNING, &priv->status)) {
 		rx_status.noise = priv->last_rx_noise;
-		rx_status.signal = iwl4965_calc_sig_qual(rx_status.ssi,
+		rx_status.qual = iwl4965_calc_sig_qual(rx_status.signal,
 							 rx_status.noise);
 	} else {
 		rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
-		rx_status.signal = iwl4965_calc_sig_qual(rx_status.ssi, 0);
+		rx_status.qual = iwl4965_calc_sig_qual(rx_status.signal, 0);
 	}
 
 	/* Reset beacon noise level if not associated. */
@@ -2988,7 +2988,7 @@ static void iwl4965_rx_reply_rx(struct iwl_priv *priv,
 	iwl4965_dbg_report_frame(priv, pkt, header, 1);
 
 	IWL_DEBUG_STATS_LIMIT("Rssi %d, noise %d, qual %d, TSF %llu\n",
-			      rx_status.ssi, rx_status.noise, rx_status.signal,
+			      rx_status.signal, rx_status.noise, rx_status.signal,
 			      (unsigned long long)rx_status.mactime);
 
 
@@ -3000,7 +3000,7 @@ static void iwl4965_rx_reply_rx(struct iwl_priv *priv,
 
 	network_packet = iwl4965_is_network_packet(priv, header);
 	if (network_packet) {
-		priv->last_rx_rssi = rx_status.ssi;
+		priv->last_rx_rssi = rx_status.signal;
 		priv->last_beacon_time =  priv->ucode_beacon_time;
 		priv->last_tsf = le64_to_cpu(rx_start->timestamp);
 	}
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 27e56b89d94..d3cbad2bf87 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -746,18 +746,10 @@ static void iwlcore_init_hw(struct iwl_priv *priv)
 	struct ieee80211_hw *hw = priv->hw;
 	hw->rate_control_algorithm = "iwl-4965-rs";
 
-	/* Tell mac80211 and its clients (e.g. Wireless Extensions)
-	 *	 the range of signal quality values that we'll provide.
-	 * Negative values for level/noise indicate that we'll provide dBm.
-	 * For WE, at least, non-0 values here *enable* display of values
-	 *	 in app (iwconfig). */
-	hw->max_rssi = -20; /* signal level, negative indicates dBm */
-	hw->max_noise = -20;	/* noise level, negative indicates dBm */
-	hw->max_signal = 100;	/* link quality indication (%) */
-
-	/* Tell mac80211 our Tx characteristics */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
-
+	/* Tell mac80211 our characteristics */
+	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
+		    IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_NOISE_DBM;
 	/* Default value; 4 EDCA QOS priorities */
 	hw->queues = 4;
 #ifdef CONFIG_IWL4965_HT
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 4baa185ba50..c1234ff4fc9 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -8029,17 +8029,10 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 
 	priv->ibss_beacon = NULL;
 
-	/* Tell mac80211 and its clients (e.g. Wireless Extensions)
-	 *   the range of signal quality values that we'll provide.
-	 * Negative values for level/noise indicate that we'll provide dBm.
-	 * For WE, at least, non-0 values here *enable* display of values
-	 *   in app (iwconfig). */
-	hw->max_rssi = -20;	/* signal level, negative indicates dBm */
-	hw->max_noise = -20;	/* noise level, negative indicates dBm */
-	hw->max_signal = 100;	/* link quality indication (%) */
-
-	/* Tell mac80211 our Tx characteristics */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
+	/* Tell mac80211 our characteristics */
+	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
+		    IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_NOISE_DBM;
 
 	/* 4 EDCA QOS priorities */
 	hw->queues = 4;
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 33d608a60d7..9cbef5bce0f 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -355,7 +355,7 @@ static void p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct ieee80211_rx_status rx_status = {0};
 	u16 freq = le16_to_cpu(hdr->freq);
 
-	rx_status.ssi = hdr->rssi;
+	rx_status.signal = hdr->rssi;
 	/* XX correct? */
 	rx_status.rate_idx = hdr->rate & 0xf;
 	rx_status.freq = freq;
@@ -1000,9 +1000,10 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
 	skb_queue_head_init(&priv->tx_queue);
 	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz;
 	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | /* not sure */
-		    IEEE80211_HW_RX_INCLUDES_FCS;
+		     IEEE80211_HW_RX_INCLUDES_FCS |
+		     IEEE80211_HW_SIGNAL_UNSPEC;
 	dev->channel_change_time = 1000;	/* TODO: find actual value */
-	dev->max_rssi = 127;
+	dev->max_signal = 127;
 
 	priv->tx_stats[0].limit = 5;
 	dev->queues = 1;
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 247fbbfb0f2..afa565c6362 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1361,10 +1361,9 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize all hw fields.
 	 */
-	rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+	rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+			       IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = 0;
-	rt2x00dev->hw->max_signal = MAX_SIGNAL;
-	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
 	rt2x00dev->hw->queues = 2;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 0d53c75d55d..c06f1b5e588 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1680,10 +1680,10 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize all hw fields.
 	 */
-	rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+	rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+			       IEEE80211_HW_SIGNAL_DBM;
+
 	rt2x00dev->hw->extra_tx_headroom = 0;
-	rt2x00dev->hw->max_signal = MAX_SIGNAL;
-	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
 	rt2x00dev->hw->queues = 2;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 80b34d47114..88bafdf8f0f 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1587,10 +1587,10 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	rt2x00dev->hw->flags =
 	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 	    IEEE80211_HW_RX_INCLUDES_FCS |
-	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+	    IEEE80211_HW_SIGNAL_DBM;
+
 	rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
-	rt2x00dev->hw->max_signal = MAX_SIGNAL;
-	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
 	rt2x00dev->hw->queues = 2;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 9929b15e28b..f51a50b31e1 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -600,9 +600,9 @@ void rt2x00lib_rxdone(struct queue_entry *entry,
 	rt2x00dev->link.qual.rx_success++;
 
 	rx_status->rate_idx = idx;
-	rx_status->signal =
+	rx_status->qual =
 	    rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc->rssi);
-	rx_status->ssi = rxdesc->rssi;
+	rx_status->signal = rxdesc->rssi;
 	rx_status->flag = rxdesc->flags;
 	rx_status->antenna = rt2x00dev->link.ant.active.rx;
 
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 98af4d26583..eaf23b90877 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2245,10 +2245,9 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00dev->hw->flags =
 	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+	    IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = 0;
-	rt2x00dev->hw->max_signal = MAX_SIGNAL;
-	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
 	rt2x00dev->hw->queues = 4;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 351d95c4f50..51c5575ed02 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1830,10 +1830,9 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00dev->hw->flags =
 	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+	    IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
-	rt2x00dev->hw->max_signal = MAX_SIGNAL;
-	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
 	rt2x00dev->hw->queues = 4;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
diff --git a/drivers/net/wireless/rtl8180_dev.c b/drivers/net/wireless/rtl8180_dev.c
index c181f23e930..c220998cee6 100644
--- a/drivers/net/wireless/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl8180_dev.c
@@ -132,8 +132,8 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
 
 			rx_status.antenna = (flags2 >> 15) & 1;
 			/* TODO: improve signal/rssi reporting */
-			rx_status.signal = flags2 & 0xFF;
-			rx_status.ssi = (flags2 >> 8) & 0x7F;
+			rx_status.qual = flags2 & 0xFF;
+			rx_status.signal = (flags2 >> 8) & 0x7F;
 			/* XXX: is this correct? */
 			rx_status.rate_idx = (flags >> 20) & 0xF;
 			rx_status.freq = dev->conf.channel->center_freq;
@@ -894,9 +894,10 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
 	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
 
 	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-		     IEEE80211_HW_RX_INCLUDES_FCS;
+		     IEEE80211_HW_RX_INCLUDES_FCS |
+		     IEEE80211_HW_SIGNAL_UNSPEC;
 	dev->queues = 1;
-	dev->max_rssi = 65;
+	dev->max_signal = 65;
 
 	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
 	reg &= RTL818X_TX_CONF_HWVER_MASK;
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index d5787b37e1f..e14c8424868 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -261,8 +261,8 @@ static void rtl8187_rx_cb(struct urb *urb)
 	}
 
 	rx_status.antenna = (hdr->signal >> 7) & 1;
-	rx_status.signal = 64 - min(hdr->noise, (u8)64);
-	rx_status.ssi = signal;
+	rx_status.qual = 64 - min(hdr->noise, (u8)64);
+	rx_status.signal = signal;
 	rx_status.rate_idx = rate;
 	rx_status.freq = dev->conf.channel->center_freq;
 	rx_status.band = dev->conf.channel->band;
@@ -740,11 +740,11 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 
 	priv->mode = IEEE80211_IF_TYPE_MNTR;
 	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-		     IEEE80211_HW_RX_INCLUDES_FCS;
+		     IEEE80211_HW_RX_INCLUDES_FCS |
+		     IEEE80211_HW_SIGNAL_UNSPEC;
 	dev->extra_tx_headroom = sizeof(struct rtl8187_tx_hdr);
 	dev->queues = 1;
-	dev->max_rssi = 65;
-	dev->max_signal = 64;
+	dev->max_signal = 65;
 
 	eeprom.data = dev;
 	eeprom.register_read = rtl8187_eeprom_register_read;
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index ee4331229f1..0c736735e21 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -638,7 +638,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr,
 
 			memset(&status, 0, sizeof(status));
 			status.flags = IEEE80211_TX_STATUS_ACK;
-			status.ack_signal = stats->ssi;
+			status.ack_signal = stats->signal;
 			__skb_unlink(skb, q);
 			tx_status(hw, skb, &status, 1);
 			goto out;
@@ -691,8 +691,8 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
 
 	stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) - 1].center_freq;
 	stats.band = IEEE80211_BAND_2GHZ;
-	stats.ssi = status->signal_strength;
-	stats.signal = zd_rx_qual_percent(buffer,
+	stats.signal = status->signal_strength;
+	stats.qual = zd_rx_qual_percent(buffer,
 		                          length - sizeof(struct rx_status),
 		                          status);
 
@@ -997,10 +997,10 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
 	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band;
 
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-		    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
-	hw->max_rssi = 100;
-	hw->max_signal = 100;
+		    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
+		    IEEE80211_HW_SIGNAL_DB;
 
+	hw->max_signal = 100;
 	hw->queues = 1;
 	hw->extra_tx_headroom = sizeof(struct zd_ctrlset);