aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
authorTomas Winkler <tomas.winkler@intel.com>2008-04-14 21:16:03 -0700
committerJohn W. Linville <linville@tuxdriver.com>2008-04-16 15:59:57 -0400
commit57aab75a39089744aba4bd126df2de526481b128 (patch)
tree34c7a4a3a29aea852e7886e68fc8778390f809e7 /drivers/net
parentb454048cb933eb69dd9d46c16bf01e9df997fa3d (diff)
iwlwifi: generalize iwlwifi init flow
This patch creates handlers to support iwlwifi init flow for multiple HWs Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-4965.c149
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.h11
-rw-r--r--drivers/net/wireless/iwlwifi/iwl4965-base.c179
3 files changed, 174 insertions, 165 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 472ca3d7e03..822169e61e9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -114,6 +114,151 @@ static const u16 default_tid_to_tx_fifo[] = {
#endif /*CONFIG_IWL4965_HT */
+/* check contents of special bootstrap uCode SRAM */
+static int iwl4965_verify_bsm(struct iwl_priv *priv)
+{
+ __le32 *image = priv->ucode_boot.v_addr;
+ u32 len = priv->ucode_boot.len;
+ u32 reg;
+ u32 val;
+
+ IWL_DEBUG_INFO("Begin verify bsm\n");
+
+ /* verify BSM SRAM contents */
+ val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
+ for (reg = BSM_SRAM_LOWER_BOUND;
+ reg < BSM_SRAM_LOWER_BOUND + len;
+ reg += sizeof(u32), image++) {
+ val = iwl_read_prph(priv, reg);
+ if (val != le32_to_cpu(*image)) {
+ IWL_ERROR("BSM uCode verification failed at "
+ "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
+ BSM_SRAM_LOWER_BOUND,
+ reg - BSM_SRAM_LOWER_BOUND, len,
+ val, le32_to_cpu(*image));
+ return -EIO;
+ }
+ }
+
+ IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
+
+ return 0;
+}
+
+/**
+ * iwl4965_load_bsm - Load bootstrap instructions
+ *
+ * BSM operation:
+ *
+ * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
+ * in special SRAM that does not power down during RFKILL. When powering back
+ * up after power-saving sleeps (or during initial uCode load), the BSM loads
+ * the bootstrap program into the on-board processor, and starts it.
+ *
+ * The bootstrap program loads (via DMA) instructions and data for a new
+ * program from host DRAM locations indicated by the host driver in the
+ * BSM_DRAM_* registers. Once the new program is loaded, it starts
+ * automatically.
+ *
+ * When initializing the NIC, the host driver points the BSM to the
+ * "initialize" uCode image. This uCode sets up some internal data, then
+ * notifies host via "initialize alive" that it is complete.
+ *
+ * The host then replaces the BSM_DRAM_* pointer values to point to the
+ * normal runtime uCode instructions and a backup uCode data cache buffer
+ * (filled initially with starting data values for the on-board processor),
+ * then triggers the "initialize" uCode to load and launch the runtime uCode,
+ * which begins normal operation.
+ *
+ * When doing a power-save shutdown, runtime uCode saves data SRAM into
+ * the backup data cache in DRAM before SRAM is powered down.
+ *
+ * When powering back up, the BSM loads the bootstrap program. This reloads
+ * the runtime uCode instructions and the backup data cache into SRAM,
+ * and re-launches the runtime uCode from where it left off.
+ */
+static int iwl4965_load_bsm(struct iwl_priv *priv)
+{
+ __le32 *image = priv->ucode_boot.v_addr;
+ u32 len = priv->ucode_boot.len;
+ dma_addr_t pinst;
+ dma_addr_t pdata;
+ u32 inst_len;
+ u32 data_len;
+ int i;
+ u32 done;
+ u32 reg_offset;
+ int ret;
+
+ IWL_DEBUG_INFO("Begin load bsm\n");
+
+ /* make sure bootstrap program is no larger than BSM's SRAM size */
+ if (len > IWL_MAX_BSM_SIZE)
+ return -EINVAL;
+
+ /* Tell bootstrap uCode where to find the "Initialize" uCode
+ * in host DRAM ... host DRAM physical address bits 35:4 for 4965.
+ * NOTE: iwl4965_initialize_alive_start() will replace these values,
+ * after the "initialize" uCode has run, to point to
+ * runtime/protocol instructions and backup data cache. */
+ pinst = priv->ucode_init.p_addr >> 4;
+ pdata = priv->ucode_init_data.p_addr >> 4;
+ inst_len = priv->ucode_init.len;
+ data_len = priv->ucode_init_data.len;
+
+ ret = iwl_grab_nic_access(priv);
+ if (ret)
+ return ret;
+
+ iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
+ iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
+ iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
+ iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
+
+ /* Fill BSM memory with bootstrap instructions */
+ for (reg_offset = BSM_SRAM_LOWER_BOUND;
+ reg_offset < BSM_SRAM_LOWER_BOUND + len;
+ reg_offset += sizeof(u32), image++)
+ _iwl_write_prph(priv, reg_offset, le32_to_cpu(*image));
+
+ ret = iwl4965_verify_bsm(priv);
+ if (ret) {
+ iwl_release_nic_access(priv);
+ return ret;
+ }
+
+ /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
+ iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
+ iwl_write_prph(priv, BSM_WR_MEM_DST_REG, RTC_INST_LOWER_BOUND);
+ iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
+
+ /* Load bootstrap code into instruction SRAM now,
+ * to prepare to load "initialize" uCode */
+ iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
+
+ /* Wait for load of bootstrap uCode to finish */
+ for (i = 0; i < 100; i++) {
+ done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
+ if (!(done & BSM_WR_CTRL_REG_BIT_START))
+ break;
+ udelay(10);
+ }
+ if (i < 100)
+ IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i);
+ else {
+ IWL_ERROR("BSM write did not complete!\n");
+ return -EIO;
+ }
+
+ /* Enable future boot loads whenever power management unit triggers it
+ * (e.g. when powering back up after power-save shutdown) */
+ iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
+
+ iwl_release_nic_access(priv);
+
+ return 0;
+}
+
static int iwl4965_init_drv(struct iwl_priv *priv)
{
int ret;
@@ -4789,6 +4934,10 @@ static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
static struct iwl_lib_ops iwl4965_lib = {
.init_drv = iwl4965_init_drv,
+ .hw_nic_init = iwl4965_hw_nic_init,
+ .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr,
+ .alive_notify = iwl4965_alive_notify,
+ .load_ucode = iwl4965_load_bsm,
.eeprom_ops = {
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 6d82376f43f..889fdbaeb73 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -89,9 +89,18 @@ struct iwl_hcmd_utils_ops {
struct iwl_lib_ops {
/* iwlwifi driver (priv) init */
int (*init_drv)(struct iwl_priv *priv);
+ /* nic init */
+ int (*hw_nic_init)(struct iwl_priv *priv);
+ /* alive notification */
+ int (*alive_notify)(struct iwl_priv *priv);
+ /* check validity of rtc data address */
+ int (*is_valid_rtc_data_addr)(u32 addr);
+ /* 1st ucode load */
+ int (*load_ucode)(struct iwl_priv *priv);
+ /* rfkill */
+ void (*radio_kill_sw)(struct iwl_priv *priv, int disable_radio);
/* eeprom operations (as defined in iwl-eeprom.h) */
struct iwl_eeprom_ops eeprom_ops;
- void (*radio_kill_sw)(struct iwl_priv *priv, int disable_radio);
};
struct iwl_ops {
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 06e44dad5f0..ecc9cba62bf 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -4305,7 +4305,7 @@ static void iwl4965_dump_nic_error_log(struct iwl_priv *priv)
base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
- if (!iwl4965_hw_valid_rtc_data_addr(base)) {
+ if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
IWL_ERROR("Not valid error log pointer 0x%08X\n", base);
return;
}
@@ -4400,7 +4400,7 @@ static void iwl4965_dump_nic_event_log(struct iwl_priv *priv)
u32 size; /* # entries that we'll print */
base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
- if (!iwl4965_hw_valid_rtc_data_addr(base)) {
+ if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
IWL_ERROR("Invalid event log pointer 0x%08X\n", base);
return;
}
@@ -5175,156 +5175,6 @@ static int iwl4965_verify_ucode(struct iwl_priv *priv)
return rc;
}
-
-/* check contents of special bootstrap uCode SRAM */
-static int iwl4965_verify_bsm(struct iwl_priv *priv)
-{
- __le32 *image = priv->ucode_boot.v_addr;
- u32 len = priv->ucode_boot.len;
- u32 reg;
- u32 val;
-
- IWL_DEBUG_INFO("Begin verify bsm\n");
-
- /* verify BSM SRAM contents */
- val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
- for (reg = BSM_SRAM_LOWER_BOUND;
- reg < BSM_SRAM_LOWER_BOUND + len;
- reg += sizeof(u32), image ++) {
- val = iwl_read_prph(priv, reg);
- if (val != le32_to_cpu(*image)) {
- IWL_ERROR("BSM uCode verification failed at "
- "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
- BSM_SRAM_LOWER_BOUND,
- reg - BSM_SRAM_LOWER_BOUND, len,
- val, le32_to_cpu(*image));
- return -EIO;
- }
- }
-
- IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
-
- return 0;
-}
-
-/**
- * iwl4965_load_bsm - Load bootstrap instructions
- *
- * BSM operation:
- *
- * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
- * in special SRAM that does not power down during RFKILL. When powering back
- * up after power-saving sleeps (or during initial uCode load), the BSM loads
- * the bootstrap program into the on-board processor, and starts it.
- *
- * The bootstrap program loads (via DMA) instructions and data for a new
- * program from host DRAM locations indicated by the host driver in the
- * BSM_DRAM_* registers. Once the new program is loaded, it starts
- * automatically.
- *
- * When initializing the NIC, the host driver points the BSM to the
- * "initialize" uCode image. This uCode sets up some internal data, then
- * notifies host via "initialize alive" that it is complete.
- *
- * The host then replaces the BSM_DRAM_* pointer values to point to the
- * normal runtime uCode instructions and a backup uCode data cache buffer
- * (filled initially with starting data values for the on-board processor),
- * then triggers the "initialize" uCode to load and launch the runtime uCode,
- * which begins normal operation.
- *
- * When doing a power-save shutdown, runtime uCode saves data SRAM into
- * the backup data cache in DRAM before SRAM is powered down.
- *
- * When powering back up, the BSM loads the bootstrap program. This reloads
- * the runtime uCode instructions and the backup data cache into SRAM,
- * and re-launches the runtime uCode from where it left off.
- */
-static int iwl4965_load_bsm(struct iwl_priv *priv)
-{
- __le32 *image = priv->ucode_boot.v_addr;
- u32 len = priv->ucode_boot.len;
- dma_addr_t pinst;
- dma_addr_t pdata;
- u32 inst_len;
- u32 data_len;
- int rc;
- int i;
- u32 done;
- u32 reg_offset;
-
- IWL_DEBUG_INFO("Begin load bsm\n");
-
- /* make sure bootstrap program is no larger than BSM's SRAM size */
- if (len > IWL_MAX_BSM_SIZE)
- return -EINVAL;
-
- /* Tell bootstrap uCode where to find the "Initialize" uCode
- * in host DRAM ... host DRAM physical address bits 35:4 for 4965.
- * NOTE: iwl4965_initialize_alive_start() will replace these values,
- * after the "initialize" uCode has run, to point to
- * runtime/protocol instructions and backup data cache. */
- pinst = priv->ucode_init.p_addr >> 4;
- pdata = priv->ucode_init_data.p_addr >> 4;
- inst_len = priv->ucode_init.len;
- data_len = priv->ucode_init_data.len;
-
- rc = iwl_grab_nic_access(priv);
- if (rc)
- return rc;
-
- iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
- iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
- iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
- iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
-
- /* Fill BSM memory with bootstrap instructions */
- for (reg_offset = BSM_SRAM_LOWER_BOUND;
- reg_offset < BSM_SRAM_LOWER_BOUND + len;
- reg_offset += sizeof(u32), image++)
- _iwl_write_prph(priv, reg_offset,
- le32_to_cpu(*image));
-
- rc = iwl4965_verify_bsm(priv);
- if (rc) {
- iwl_release_nic_access(priv);
- return rc;
- }
-
- /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
- iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
- iwl_write_prph(priv, BSM_WR_MEM_DST_REG,
- RTC_INST_LOWER_BOUND);
- iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
-
- /* Load bootstrap code into instruction SRAM now,
- * to prepare to load "initialize" uCode */
- iwl_write_prph(priv, BSM_WR_CTRL_REG,
- BSM_WR_CTRL_REG_BIT_START);
-
- /* Wait for load of bootstrap uCode to finish */
- for (i = 0; i < 100; i++) {
- done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
- if (!(done & BSM_WR_CTRL_REG_BIT_START))
- break;
- udelay(10);
- }
- if (i < 100)
- IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i);
- else {
- IWL_ERROR("BSM write did not complete!\n");
- return -EIO;
- }
-
- /* Enable future boot loads whenever power management unit triggers it
- * (e.g. when powering back up after power-save shutdown) */
- iwl_write_prph(priv, BSM_WR_CTRL_REG,
- BSM_WR_CTRL_REG_BIT_START_EN);
-
- iwl_release_nic_access(priv);
-
- return 0;
-}
-
static void iwl4965_nic_start(struct iwl_priv *priv)
{
/* Remove all resets to allow NIC to operate */
@@ -5634,7 +5484,7 @@ static void iwl4965_init_alive_start(struct iwl_priv *priv)
*/
static void iwl4965_alive_start(struct iwl_priv *priv)
{
- int rc = 0;
+ int ret = 0;
IWL_DEBUG_INFO("Runtime Alive received.\n");
@@ -5657,10 +5507,10 @@ static void iwl4965_alive_start(struct iwl_priv *priv)
iwlcore_clear_stations_table(priv);
- rc = iwl4965_alive_notify(priv);
- if (rc) {
+ ret = priv->cfg->ops->lib->alive_notify(priv);
+ if (ret) {
IWL_WARNING("Could not complete ALIVE transition [ntf]: %d\n",
- rc);
+ ret);
goto restart;
}
@@ -5835,7 +5685,8 @@ static void iwl4965_down(struct iwl_priv *priv)
static int __iwl4965_up(struct iwl_priv *priv)
{
- int rc, i;
+ int i;
+ int ret;
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
IWL_WARNING("Exit pending; will not bring the NIC up\n");
@@ -5870,10 +5721,10 @@ static int __iwl4965_up(struct iwl_priv *priv)
iwl_rfkill_set_hw_state(priv);
iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
- rc = iwl4965_hw_nic_init(priv);
- if (rc) {
- IWL_ERROR("Unable to int nic\n");
- return rc;
+ ret = priv->cfg->ops->lib->hw_nic_init(priv);
+ if (ret) {
+ IWL_ERROR("Unable to init nic\n");
+ return ret;
}
/* make sure rfkill handshake bits are cleared */
@@ -5906,10 +5757,10 @@ static int __iwl4965_up(struct iwl_priv *priv)
/* load bootstrap state machine,
* load bootstrap program into processor's memory,
* prepare to load the "initialize" uCode */
- rc = iwl4965_load_bsm(priv);
+ ret = priv->cfg->ops->lib->load_ucode(priv);
- if (rc) {
- IWL_ERROR("Unable to set up bootstrap uCode: %d\n", rc);
+ if (ret) {
+ IWL_ERROR("Unable to set up bootstrap uCode: %d\n", ret);
continue;
}