aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
authorBen Hutchings <bhutchings@solarflare.com>2008-09-01 12:48:17 +0100
committerJeff Garzik <jgarzik@redhat.com>2008-09-03 09:53:47 -0400
commitf8b87c17017f2ce1890fb9a7f85fb0fbf5643e37 (patch)
tree261a31a95d2fa296ef7abaf6019ff5b7c86bbc63 /drivers/net
parent3594e131b23665b728b4c98daaf0b61b1d4aaa7a (diff)
sfc: Make PHY flash mode a device attribute, not a module parameter
This allows updating PHY firmware for one interface without removing all other interfaces handled by the driver. Replace tx_disabled flags and 10Xpress status enumeration with flags in enum efx_phy_mode. Prevent an interface from being brought up while in PHY flash mode. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/sfc/boards.h2
-rw-r--r--drivers/net/sfc/efx.c3
-rw-r--r--drivers/net/sfc/falcon_xmac.c15
-rw-r--r--drivers/net/sfc/mdio_10g.c4
-rw-r--r--drivers/net/sfc/net_driver.h21
-rw-r--r--drivers/net/sfc/phy.h8
-rw-r--r--drivers/net/sfc/sfe4001.c186
-rw-r--r--drivers/net/sfc/tenxpress.c46
-rw-r--r--drivers/net/sfc/xfp_phy.c9
9 files changed, 171 insertions, 123 deletions
diff --git a/drivers/net/sfc/boards.h b/drivers/net/sfc/boards.h
index e5e844359ce..c6e01b64bfb 100644
--- a/drivers/net/sfc/boards.h
+++ b/drivers/net/sfc/boards.h
@@ -21,7 +21,5 @@ enum efx_board_type {
extern int efx_set_board_info(struct efx_nic *efx, u16 revision_info);
extern int sfe4001_init(struct efx_nic *efx);
-/* Are we putting the PHY into flash config mode */
-extern unsigned int sfe4001_phy_flash_cfg;
#endif
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 864095ea5b3..d41a6e34da7 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -1296,6 +1296,9 @@ static int efx_net_open(struct net_device *net_dev)
EFX_LOG(efx, "opening device %s on CPU %d\n", net_dev->name,
raw_smp_processor_id());
+ if (efx->phy_mode & PHY_MODE_SPECIAL)
+ return -EBUSY;
+
efx_start_all(efx);
return 0;
}
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index be5a86f0e5c..5620d9d1392 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -69,10 +69,6 @@ static int falcon_reset_xmac(struct efx_nic *efx)
udelay(10);
}
- /* This often fails when DSP is disabled, ignore it */
- if (sfe4001_phy_flash_cfg)
- return 0;
-
EFX_ERR(efx, "timed out waiting for XMAC core reset\n");
return -ETIMEDOUT;
}
@@ -444,7 +440,8 @@ static bool falcon_check_xaui_link_up(struct efx_nic *efx)
max_tries = tries;
if ((efx->loopback_mode == LOOPBACK_NETWORK) ||
- (efx->phy_type == PHY_TYPE_NONE))
+ (efx->phy_type == PHY_TYPE_NONE) ||
+ efx_phy_mode_disabled(efx->phy_mode))
return false;
while (tries) {
@@ -471,7 +468,11 @@ void falcon_reconfigure_xmac(struct efx_nic *efx)
falcon_deconfigure_mac_wrapper(efx);
- efx->tx_disabled = LOOPBACK_INTERNAL(efx);
+ /* Reconfigure the PHY, disabling transmit in mac level loopback. */
+ if (LOOPBACK_INTERNAL(efx))
+ efx->phy_mode |= PHY_MODE_TX_DISABLED;
+ else
+ efx->phy_mode &= ~PHY_MODE_TX_DISABLED;
efx->phy_op->reconfigure(efx);
falcon_reconfigure_xgxs_core(efx);
@@ -566,7 +567,7 @@ int falcon_check_xmac(struct efx_nic *efx)
int rc;
if ((efx->loopback_mode == LOOPBACK_NETWORK) ||
- (efx->phy_type == PHY_TYPE_NONE))
+ efx_phy_mode_disabled(efx->phy_mode))
return 0;
falcon_mask_status_intr(efx, false);
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index 406494684bb..003e48dcb2f 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -172,6 +172,8 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
return true;
else if (efx->loopback_mode == LOOPBACK_NETWORK)
return false;
+ else if (efx_phy_mode_disabled(efx->phy_mode))
+ return false;
else if (efx->loopback_mode == LOOPBACK_PHYXS)
mmd_mask &= ~(MDIO_MMDREG_DEVS0_PHYXS |
MDIO_MMDREG_DEVS0_PCS |
@@ -206,7 +208,7 @@ void mdio_clause45_transmit_disable(struct efx_nic *efx)
ctrl1 = ctrl2 = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_TXDIS);
- if (efx->tx_disabled)
+ if (efx->phy_mode & PHY_MODE_TX_DISABLED)
ctrl2 |= (1 << MDIO_MMDREG_TXDIS_GLOBAL_LBN);
else
ctrl1 &= ~(1 << MDIO_MMDREG_TXDIS_GLOBAL_LBN);
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index e65d6617bee..df863bcc06f 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -519,6 +519,23 @@ struct efx_phy_operations {
unsigned loopbacks;
};
+/**
+ * @enum efx_phy_mode - PHY operating mode flags
+ * @PHY_MODE_NORMAL: on and should pass traffic
+ * @PHY_MODE_TX_DISABLED: on with TX disabled
+ * @PHY_MODE_SPECIAL: on but will not pass traffic
+ */
+enum efx_phy_mode {
+ PHY_MODE_NORMAL = 0,
+ PHY_MODE_TX_DISABLED = 1,
+ PHY_MODE_SPECIAL = 8,
+};
+
+static inline bool efx_phy_mode_disabled(enum efx_phy_mode mode)
+{
+ return (mode & ~PHY_MODE_TX_DISABLED) != 0;
+}
+
/*
* Efx extended statistics
*
@@ -661,7 +678,7 @@ union efx_multicast_hash {
* @phy_op: PHY interface
* @phy_data: PHY private data (including PHY-specific stats)
* @mii: PHY interface
- * @tx_disabled: PHY transmitter turned off
+ * @phy_mode: PHY operating mode
* @link_up: Link status
* @link_options: Link options (MII/GMII format)
* @n_link_state_changes: Number of times the link has changed state
@@ -735,7 +752,7 @@ struct efx_nic {
struct efx_phy_operations *phy_op;
void *phy_data;
struct mii_if_info mii;
- bool tx_disabled;
+ enum efx_phy_mode phy_mode;
bool link_up;
unsigned int link_options;
diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h
index 25bd18ec704..f746536f4ff 100644
--- a/drivers/net/sfc/phy.h
+++ b/drivers/net/sfc/phy.h
@@ -15,14 +15,6 @@
*/
extern struct efx_phy_operations falcon_tenxpress_phy_ops;
-enum tenxpress_state {
- TENXPRESS_STATUS_OFF = 0,
- TENXPRESS_STATUS_OTEMP = 1,
- TENXPRESS_STATUS_NORMAL = 2,
-};
-
-extern void tenxpress_set_state(struct efx_nic *efx,
- enum tenxpress_state state);
extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink);
extern void tenxpress_crc_err(struct efx_nic *efx);
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index f9272816437..d90fab59f83 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -13,6 +13,7 @@
* the PHY
*/
#include <linux/delay.h>
+#include "net_driver.h"
#include "efx.h"
#include "phy.h"
#include "boards.h"
@@ -120,52 +121,15 @@ static void sfe4001_poweroff(struct efx_nic *efx)
i2c_smbus_read_byte_data(hwmon_client, RSL);
}
-static void sfe4001_fini(struct efx_nic *efx)
+static int sfe4001_poweron(struct efx_nic *efx)
{
- EFX_INFO(efx, "%s\n", __func__);
-
- sfe4001_poweroff(efx);
- i2c_unregister_device(efx->board_info.ioexp_client);
- i2c_unregister_device(efx->board_info.hwmon_client);
-}
-
-/* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected
- * to the FLASH_CFG_1 input on the DSP. We must keep it high at power-
- * up to allow writing the flash (done through MDIO from userland).
- */
-unsigned int sfe4001_phy_flash_cfg;
-module_param_named(phy_flash_cfg, sfe4001_phy_flash_cfg, uint, 0444);
-MODULE_PARM_DESC(phy_flash_cfg,
- "Force PHY to enter flash configuration mode");
-
-/* This board uses an I2C expander to provider power to the PHY, which needs to
- * be turned on before the PHY can be used.
- * Context: Process context, rtnl lock held
- */
-int sfe4001_init(struct efx_nic *efx)
-{
- struct i2c_client *hwmon_client, *ioexp_client;
+ struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
+ struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
unsigned int i, j;
int rc;
u8 out;
efx_dword_t reg;
- hwmon_client = i2c_new_dummy(&efx->i2c_adap, MAX6647);
- if (!hwmon_client)
- return -EIO;
- efx->board_info.hwmon_client = hwmon_client;
-
- ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539);
- if (!ioexp_client) {
- rc = -EIO;
- goto fail_hwmon;
- }
- efx->board_info.ioexp_client = ioexp_client;
-
- /* 10Xpress has fixed-function LED pins, so there is no board-specific
- * blink code. */
- efx->board_info.blink = tenxpress_phy_blink;
-
/* Ensure that XGXS and XAUI SerDes are held in reset */
EFX_POPULATE_DWORD_7(reg, XX_PWRDNA_EN, 1,
XX_PWRDNB_EN, 1,
@@ -177,33 +141,15 @@ int sfe4001_init(struct efx_nic *efx)
falcon_xmac_writel(efx, &reg, XX_PWR_RST_REG_MAC);
udelay(10);
- efx->board_info.fini = sfe4001_fini;
-
- /* Set DSP over-temperature alert threshold */
- EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature);
- rc = i2c_smbus_write_byte_data(hwmon_client, WLHO,
- xgphy_max_temperature);
- if (rc)
- goto fail_ioexp;
-
- /* Read it back and verify */
- rc = i2c_smbus_read_byte_data(hwmon_client, RLHN);
- if (rc < 0)
- goto fail_ioexp;
- if (rc != xgphy_max_temperature) {
- rc = -EFAULT;
- goto fail_ioexp;
- }
-
/* Clear any previous over-temperature alert */
rc = i2c_smbus_read_byte_data(hwmon_client, RSL);
if (rc < 0)
- goto fail_ioexp;
+ return rc;
/* Enable port 0 and port 1 outputs on IO expander */
rc = i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0x00);
if (rc)
- goto fail_ioexp;
+ return rc;
rc = i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG,
0xff & ~(1 << P1_SPARE_LBN));
if (rc)
@@ -231,7 +177,7 @@ int sfe4001_init(struct efx_nic *efx)
out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) |
(1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) |
(1 << P0_X_TRST_LBN));
- if (sfe4001_phy_flash_cfg)
+ if (efx->phy_mode & PHY_MODE_SPECIAL)
out |= 1 << P0_EN_3V3X_LBN;
rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
@@ -250,9 +196,9 @@ int sfe4001_init(struct efx_nic *efx)
/* In flash config mode, DSP does not turn on AFE, so
* just wait 1 second.
*/
- if (sfe4001_phy_flash_cfg) {
+ if (efx->phy_mode & PHY_MODE_SPECIAL) {
schedule_timeout_uninterruptible(HZ);
- goto done;
+ return 0;
}
for (j = 0; j < 10; ++j) {
@@ -263,23 +209,127 @@ int sfe4001_init(struct efx_nic *efx)
if (rc < 0)
goto fail_on;
if (rc & (1 << P1_AFE_PWD_LBN))
- goto done;
+ return 0;
}
}
EFX_INFO(efx, "timed out waiting for DSP boot\n");
rc = -ETIMEDOUT;
- goto fail_on;
+fail_on:
+ sfe4001_poweroff(efx);
+ return rc;
+}
+
+/* On SFE4001 rev A2 and later, we can control the FLASH_CFG_1 pin
+ * using the 3V3X output of the IO-expander. Allow the user to set
+ * this when the device is stopped, and keep it stopped then.
+ */
+
+static ssize_t show_phy_flash_cfg(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
+ return sprintf(buf, "%d\n", !!(efx->phy_mode & PHY_MODE_SPECIAL));
+}
+
+static ssize_t set_phy_flash_cfg(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
+ enum efx_phy_mode old_mode, new_mode;
+ int err;
+
+ rtnl_lock();
+ old_mode = efx->phy_mode;
+ if (count == 0 || *buf == '0')
+ new_mode = old_mode & ~PHY_MODE_SPECIAL;
+ else
+ new_mode = PHY_MODE_SPECIAL;
+ if (old_mode == new_mode) {
+ err = 0;
+ } else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) {
+ err = -EBUSY;
+ } else {
+ efx->phy_mode = new_mode;
+ err = sfe4001_poweron(efx);
+ efx_reconfigure_port(efx);
+ }
+ rtnl_unlock();
+
+ return err ? err : count;
+}
+
+static DEVICE_ATTR(phy_flash_cfg, 0644, show_phy_flash_cfg, set_phy_flash_cfg);
+
+static void sfe4001_fini(struct efx_nic *efx)
+{
+ EFX_INFO(efx, "%s\n", __func__);
+
+ device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
+ sfe4001_poweroff(efx);
+ i2c_unregister_device(efx->board_info.ioexp_client);
+ i2c_unregister_device(efx->board_info.hwmon_client);
+}
+
+/* This board uses an I2C expander to provider power to the PHY, which needs to
+ * be turned on before the PHY can be used.
+ * Context: Process context, rtnl lock held
+ */
+int sfe4001_init(struct efx_nic *efx)
+{
+ struct i2c_client *hwmon_client;
+ int rc;
+
+ hwmon_client = i2c_new_dummy(&efx->i2c_adap, MAX6647);
+ if (!hwmon_client)
+ return -EIO;
+ efx->board_info.hwmon_client = hwmon_client;
+
+ /* Set DSP over-temperature alert threshold */
+ EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature);
+ rc = i2c_smbus_write_byte_data(hwmon_client, WLHO,
+ xgphy_max_temperature);
+ if (rc)
+ goto fail_ioexp;
+
+ /* Read it back and verify */
+ rc = i2c_smbus_read_byte_data(hwmon_client, RLHN);
+ if (rc < 0)
+ goto fail_ioexp;
+ if (rc != xgphy_max_temperature) {
+ rc = -EFAULT;
+ goto fail_ioexp;
+ }
+
+ efx->board_info.ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539);
+ if (!efx->board_info.ioexp_client) {
+ rc = -EIO;
+ goto fail_hwmon;
+ }
+
+ /* 10Xpress has fixed-function LED pins, so there is no board-specific
+ * blink code. */
+ efx->board_info.blink = tenxpress_phy_blink;
+
+ efx->board_info.fini = sfe4001_fini;
+
+ rc = sfe4001_poweron(efx);
+ if (rc)
+ goto fail_ioexp;
+
+ rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
+ if (rc)
+ goto fail_on;
-done:
EFX_INFO(efx, "PHY is powered on\n");
return 0;
fail_on:
sfe4001_poweroff(efx);
fail_ioexp:
- i2c_unregister_device(ioexp_client);
+ i2c_unregister_device(efx->board_info.ioexp_client);
fail_hwmon:
- i2c_unregister_device(hwmon_client);
+ i2c_unregister_device(hwmon_client);
return rc;
}
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index b92b24bba9e..499e127f6dd 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -119,27 +119,12 @@ MODULE_PARM_DESC(crc_error_reset_threshold,
"Max number of CRC errors before XAUI reset");
struct tenxpress_phy_data {
- enum tenxpress_state state;
enum efx_loopback_mode loopback_mode;
atomic_t bad_crc_count;
- bool tx_disabled;
+ enum efx_phy_mode phy_mode;
int bad_lp_tries;
};
-static int tenxpress_state_is(struct efx_nic *efx, int state)
-{
- struct tenxpress_phy_data *phy_data = efx->phy_data;
- return (phy_data != NULL) && (state == phy_data->state);
-}
-
-void tenxpress_set_state(struct efx_nic *efx,
- enum tenxpress_state state)
-{
- struct tenxpress_phy_data *phy_data = efx->phy_data;
- if (phy_data != NULL)
- phy_data->state = state;
-}
-
void tenxpress_crc_err(struct efx_nic *efx)
{
struct tenxpress_phy_data *phy_data = efx->phy_data;
@@ -214,15 +199,12 @@ static int tenxpress_phy_init(struct efx_nic *efx)
if (!phy_data)
return -ENOMEM;
efx->phy_data = phy_data;
+ phy_data->phy_mode = efx->phy_mode;
- tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL);
-
- if (!sfe4001_phy_flash_cfg) {
- rc = mdio_clause45_wait_reset_mmds(efx,
- TENXPRESS_REQUIRED_DEVS);
- if (rc < 0)
- goto fail;
- }
+ rc = mdio_clause45_wait_reset_mmds(efx,
+ TENXPRESS_REQUIRED_DEVS);
+ if (rc < 0)
+ goto fail;
rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
if (rc < 0)
@@ -370,13 +352,16 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
bool loop_change = LOOPBACK_OUT_OF(phy_data, efx,
TENXPRESS_LOOPBACKS);
- if (!tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL))
+ if (efx->phy_mode & PHY_MODE_SPECIAL) {
+ phy_data->phy_mode = efx->phy_mode;
return;
+ }
/* When coming out of transmit disable, coming out of low power
* mode, or moving out of any PHY internal loopback mode,
* perform a special software reset */
- if ((phy_data->tx_disabled && !efx->tx_disabled) ||
+ if ((efx->phy_mode == PHY_MODE_NORMAL &&
+ phy_data->phy_mode != PHY_MODE_NORMAL) ||
loop_change) {
tenxpress_special_reset(efx);
falcon_reset_xaui(efx);
@@ -386,8 +371,8 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
mdio_clause45_phy_reconfigure(efx);
tenxpress_phyxs_loopback(efx);
- phy_data->tx_disabled = efx->tx_disabled;
phy_data->loopback_mode = efx->loopback_mode;
+ phy_data->phy_mode = efx->phy_mode;
efx->link_up = tenxpress_link_ok(efx, false);
efx->link_options = GM_LPA_10000FULL;
}
@@ -402,16 +387,15 @@ static void tenxpress_phy_clear_interrupt(struct efx_nic *efx)
static int tenxpress_phy_check_hw(struct efx_nic *efx)
{
struct tenxpress_phy_data *phy_data = efx->phy_data;
- bool phy_up = tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL);
bool link_ok;
- link_ok = phy_up && tenxpress_link_ok(efx, true);
+ link_ok = (phy_data->phy_mode == PHY_MODE_NORMAL &&
+ tenxpress_link_ok(efx, true));
if (link_ok != efx->link_up)
falcon_xmac_sim_phy_event(efx);
- /* Nothing to check if we've already shut down the PHY */
- if (!phy_up)
+ if (phy_data->phy_mode != PHY_MODE_NORMAL)
return 0;
if (atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) {
diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c
index fd4045b4d9d..f6edecc2e58 100644
--- a/drivers/net/sfc/xfp_phy.c
+++ b/drivers/net/sfc/xfp_phy.c
@@ -40,7 +40,7 @@ void xfp_set_led(struct efx_nic *p, int led, int mode)
}
struct xfp_phy_data {
- bool tx_disabled;
+ enum efx_phy_mode phy_mode;
};
#define XFP_MAX_RESET_TIME 500
@@ -93,7 +93,7 @@ static int xfp_phy_init(struct efx_nic *efx)
" %x)\n", devid, MDIO_ID_OUI(devid), MDIO_ID_MODEL(devid),
MDIO_ID_REV(devid));
- phy_data->tx_disabled = efx->tx_disabled;
+ phy_data->phy_mode = efx->phy_mode;
rc = xfp_reset_phy(efx);
@@ -136,13 +136,14 @@ static void xfp_phy_reconfigure(struct efx_nic *efx)
struct xfp_phy_data *phy_data = efx->phy_data;
/* Reset the PHY when moving from tx off to tx on */
- if (phy_data->tx_disabled && !efx->tx_disabled)
+ if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) &&
+ (phy_data->phy_mode & PHY_MODE_TX_DISABLED))
xfp_reset_phy(efx);
mdio_clause45_transmit_disable(efx);
mdio_clause45_phy_reconfigure(efx);
- phy_data->tx_disabled = efx->tx_disabled;
+ phy_data->phy_mode = efx->phy_mode;
efx->link_up = xfp_link_ok(efx);
efx->link_options = GM_LPA_10000FULL;
}