aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>2005-12-13 00:06:22 -0500
committerJeff Garzik <jgarzik@pobox.com>2005-12-13 00:06:22 -0500
commitfd803241744ad6e4262b6588c6af89e8fb794098 (patch)
treed8c4261a4799a2c9ee980cdd6a0c3c5ac61cafed /drivers/net
parentff7eba15ae65e4299fd9e0fbf067477ce6b43d91 (diff)
e1000: Fixes for 8357x
- TSO workaround - Fixes eeprom version reporting - Fix loopback test - Fix for WOL Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/e1000/e1000.h4
-rw-r--r--drivers/net/e1000/e1000_ethtool.c95
-rw-r--r--drivers/net/e1000/e1000_hw.c67
-rw-r--r--drivers/net/e1000/e1000_hw.h4
-rw-r--r--drivers/net/e1000/e1000_main.c64
5 files changed, 150 insertions, 84 deletions
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 3f653a93e1b..e02e9ba2e18 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -188,11 +188,13 @@ struct e1000_tx_ring {
/* array of buffer information structs */
struct e1000_buffer *buffer_info;
- struct e1000_buffer previous_buffer_info;
spinlock_t tx_lock;
uint16_t tdh;
uint16_t tdt;
uint64_t pkt;
+
+ boolean_t last_tx_tso;
+
};
struct e1000_rx_ring {
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 8646914964e..c88f1a3c1b1 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -562,10 +562,29 @@ e1000_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *drvinfo)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
+ char firmware_version[32];
+ uint16_t eeprom_data;
strncpy(drvinfo->driver, e1000_driver_name, 32);
strncpy(drvinfo->version, e1000_driver_version, 32);
- strncpy(drvinfo->fw_version, "N/A", 32);
+
+ /* EEPROM image version # is reported as firware version # for
+ * 8257{1|2|3} controllers */
+ e1000_read_eeprom(&adapter->hw, 5, 1, &eeprom_data);
+ switch (adapter->hw.mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ sprintf(firmware_version, "%d.%d-%d",
+ (eeprom_data & 0xF000) >> 12,
+ (eeprom_data & 0x0FF0) >> 4,
+ eeprom_data & 0x000F);
+ break;
+ default:
+ sprintf(firmware_version, "n/a");
+ }
+
+ strncpy(drvinfo->fw_version, firmware_version, 32);
strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
drvinfo->n_stats = E1000_STATS_LEN;
drvinfo->testinfo_len = E1000_TEST_LEN;
@@ -1309,21 +1328,32 @@ static int
e1000_setup_loopback_test(struct e1000_adapter *adapter)
{
uint32_t rctl;
+ struct e1000_hw *hw = &adapter->hw;
- if(adapter->hw.media_type == e1000_media_type_fiber ||
- adapter->hw.media_type == e1000_media_type_internal_serdes) {
- if(adapter->hw.mac_type == e1000_82545 ||
- adapter->hw.mac_type == e1000_82546 ||
- adapter->hw.mac_type == e1000_82545_rev_3 ||
- adapter->hw.mac_type == e1000_82546_rev_3)
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+ switch (hw->mac_type) {
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
return e1000_set_phy_loopback(adapter);
- else {
- rctl = E1000_READ_REG(&adapter->hw, RCTL);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+#define E1000_SERDES_LB_ON 0x410
+ e1000_set_phy_loopback(adapter);
+ E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_ON);
+ msec_delay(10);
+ return 0;
+ break;
+ default:
+ rctl = E1000_READ_REG(hw, RCTL);
rctl |= E1000_RCTL_LBM_TCVR;
- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ E1000_WRITE_REG(hw, RCTL, rctl);
return 0;
}
- } else if(adapter->hw.media_type == e1000_media_type_copper)
+ } else if (hw->media_type == e1000_media_type_copper)
return e1000_set_phy_loopback(adapter);
return 7;
@@ -1334,25 +1364,36 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter)
{
uint32_t rctl;
uint16_t phy_reg;
+ struct e1000_hw *hw = &adapter->hw;
rctl = E1000_READ_REG(&adapter->hw, RCTL);
rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
- if(adapter->hw.media_type == e1000_media_type_copper ||
- ((adapter->hw.media_type == e1000_media_type_fiber ||
- adapter->hw.media_type == e1000_media_type_internal_serdes) &&
- (adapter->hw.mac_type == e1000_82545 ||
- adapter->hw.mac_type == e1000_82546 ||
- adapter->hw.mac_type == e1000_82545_rev_3 ||
- adapter->hw.mac_type == e1000_82546_rev_3))) {
- adapter->hw.autoneg = TRUE;
- e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
- if(phy_reg & MII_CR_LOOPBACK) {
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes){
+#define E1000_SERDES_LB_OFF 0x400
+ E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_OFF);
+ msec_delay(10);
+ break;
+ }
+ /* fall thru for Cu adapters */
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ default:
+ hw->autoneg = TRUE;
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ if (phy_reg & MII_CR_LOOPBACK) {
phy_reg &= ~MII_CR_LOOPBACK;
- e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg);
- e1000_phy_reset(&adapter->hw);
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+ e1000_phy_reset(hw);
}
+ break;
}
}
@@ -1681,6 +1722,14 @@ e1000_phys_id(struct net_device *netdev, uint32_t data)
msleep_interruptible(data * 1000);
del_timer_sync(&adapter->blink_timer);
}
+ else if(adapter->hw.mac_type < e1000_82573) {
+ E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE |
+ E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK |
+ (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
+ (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) |
+ (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT)));
+ msleep_interruptible(data * 1000);
+ }
else {
E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE |
E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK |
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index a267c5235fc..136fc031e4a 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -563,11 +563,13 @@ e1000_reset_hw(struct e1000_hw *hw)
msec_delay(20);
break;
case e1000_82573:
- udelay(10);
- ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_EE_RST;
- E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
- E1000_WRITE_FLUSH(hw);
+ if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) {
+ udelay(10);
+ ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH(hw);
+ }
/* fall through */
case e1000_82571:
case e1000_82572:
@@ -844,19 +846,27 @@ e1000_setup_link(struct e1000_hw *hw)
* control setting, then the variable hw->fc will
* be initialized based on a value in the EEPROM.
*/
- if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data)) {
- DEBUGOUT("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
-
- if(hw->fc == e1000_fc_default) {
- if((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
- hw->fc = e1000_fc_none;
- else if((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
- EEPROM_WORD0F_ASM_DIR)
- hw->fc = e1000_fc_tx_pause;
- else
+ if (hw->fc == e1000_fc_default) {
+ switch (hw->mac_type) {
+ case e1000_82573:
hw->fc = e1000_fc_full;
+ break;
+ default:
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc = e1000_fc_none;
+ else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
+ EEPROM_WORD0F_ASM_DIR)
+ hw->fc = e1000_fc_tx_pause;
+ else
+ hw->fc = e1000_fc_full;
+ break;
+ }
}
/* We want to save off the original Flow Control configuration just
@@ -2962,13 +2972,22 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
if(hw->mac_type > e1000_82543) {
/* Read the device control register and assert the E1000_CTRL_PHY_RST
* bit. Then, take it out of reset.
+ * For pre-e1000_82571 hardware, we delay for 10ms between the assert
+ * and deassert. For e1000_82571 hardware and later, we instead delay
+ * for 10ms after the deassertion.
*/
ctrl = E1000_READ_REG(hw, CTRL);
E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST);
E1000_WRITE_FLUSH(hw);
- msec_delay(10);
+
+ if (hw->mac_type < e1000_82571)
+ msec_delay(10);
+
E1000_WRITE_REG(hw, CTRL, ctrl);
E1000_WRITE_FLUSH(hw);
+
+ if (hw->mac_type >= e1000_82571)
+ msec_delay(10);
} else {
/* Read the Extended Device Control Register, assert the PHY_RESET_DIR
* bit to put the PHY into reset. Then, take it out of reset.
@@ -5278,11 +5297,15 @@ e1000_get_bus_info(struct e1000_hw *hw)
hw->bus_speed = e1000_bus_speed_unknown;
hw->bus_width = e1000_bus_width_unknown;
break;
- case e1000_82571:
case e1000_82572:
case e1000_82573:
hw->bus_type = e1000_bus_type_pci_express;
hw->bus_speed = e1000_bus_speed_2500;
+ hw->bus_width = e1000_bus_width_pciex_1;
+ break;
+ case e1000_82571:
+ hw->bus_type = e1000_bus_type_pci_express;
+ hw->bus_speed = e1000_bus_speed_2500;
hw->bus_width = e1000_bus_width_pciex_4;
break;
default:
@@ -6650,6 +6673,12 @@ e1000_get_auto_rd_done(struct e1000_hw *hw)
break;
}
+ /* PHY configuration from NVM just starts after EECD_AUTO_RD sets to high.
+ * Need to wait for PHY configuration completion before accessing NVM
+ * and PHY. */
+ if (hw->mac_type == e1000_82573)
+ msec_delay(25);
+
return E1000_SUCCESS;
}
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 76ce12809a1..7caa35748ce 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -123,6 +123,7 @@ typedef enum {
e1000_bus_width_32,
e1000_bus_width_64,
e1000_bus_width_pciex_1,
+ e1000_bus_width_pciex_2,
e1000_bus_width_pciex_4,
e1000_bus_width_reserved
} e1000_bus_width;
@@ -149,6 +150,7 @@ typedef enum {
e1000_igp_cable_length_90 = 90,
e1000_igp_cable_length_100 = 100,
e1000_igp_cable_length_110 = 110,
+ e1000_igp_cable_length_115 = 115,
e1000_igp_cable_length_120 = 120,
e1000_igp_cable_length_130 = 130,
e1000_igp_cable_length_140 = 140,
@@ -1457,6 +1459,7 @@ struct e1000_hw {
#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+#define E1000_EECD_SECVAL_SHIFT 22
#define E1000_STM_OPCODE 0xDB00
#define E1000_HICR_FW_RESET 0xC0
@@ -1951,7 +1954,6 @@ struct e1000_host_command_info {
#define E1000_MDALIGN 4096
-#define E1000_GCR_BEM32 0x00400000
#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
/* Function Active and Power State to MNG */
#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index e0ae248b431..438a931fd55 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -711,6 +711,7 @@ e1000_probe(struct pci_dev *pdev,
break;
case e1000_82546:
case e1000_82546_rev_3:
+ case e1000_82571:
if((E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
&& (adapter->hw.media_type == e1000_media_type_copper)) {
e1000_read_eeprom(&adapter->hw,
@@ -1158,7 +1159,6 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter,
return -ENOMEM;
}
memset(txdr->buffer_info, 0, size);
- memset(&txdr->previous_buffer_info, 0, sizeof(struct e1000_buffer));
/* round up to nearest 4K */
@@ -1813,11 +1813,6 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter,
/* Free all the Tx ring sk_buffs */
- if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
- e1000_unmap_and_free_tx_resource(adapter,
- &tx_ring->previous_buffer_info);
- }
-
for(i = 0; i < tx_ring->count; i++) {
buffer_info = &tx_ring->buffer_info[i];
e1000_unmap_and_free_tx_resource(adapter, buffer_info);
@@ -1832,6 +1827,7 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter,
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
+ tx_ring->last_tx_tso = 0;
writel(0, adapter->hw.hw_addr + tx_ring->tdh);
writel(0, adapter->hw.hw_addr + tx_ring->tdt);
@@ -2437,6 +2433,16 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
buffer_info = &tx_ring->buffer_info[i];
size = min(len, max_per_txd);
#ifdef NETIF_F_TSO
+ /* Workaround for Controller erratum --
+ * descriptor for non-tso packet in a linear SKB that follows a
+ * tso gets written back prematurely before the data is fully
+ * DMAd to the controller */
+ if (!skb->data_len && tx_ring->last_tx_tso &&
+ !skb_shinfo(skb)->tso_size) {
+ tx_ring->last_tx_tso = 0;
+ size -= 4;
+ }
+
/* Workaround for premature desc write-backs
* in TSO mode. Append 4-byte sentinel desc */
if(unlikely(mss && !nr_frags && size == len && size > 8))
@@ -2693,6 +2699,14 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
if(skb->ip_summed == CHECKSUM_HW)
count++;
#endif
+
+#ifdef NETIF_F_TSO
+ /* Controller Erratum workaround */
+ if (!skb->data_len && tx_ring->last_tx_tso &&
+ !skb_shinfo(skb)->tso_size)
+ count++;
+#endif
+
count += TXD_USE_COUNT(len, max_txd_pwr);
if(adapter->pcix_82544)
@@ -2774,9 +2788,10 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
return NETDEV_TX_OK;
}
- if (likely(tso))
+ if (likely(tso)) {
+ tx_ring->last_tx_tso = 1;
tx_flags |= E1000_TX_FLAGS_TSO;
- else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
+ } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
tx_flags |= E1000_TX_FLAGS_CSUM;
/* Old method was to assume IPv4 packet by default if TSO was enabled.
@@ -3227,37 +3242,12 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
eop_desc = E1000_TX_DESC(*tx_ring, eop);
while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
- /* Premature writeback of Tx descriptors clear (free buffers
- * and unmap pci_mapping) previous_buffer_info */
- if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
- e1000_unmap_and_free_tx_resource(adapter,
- &tx_ring->previous_buffer_info);
- }
-
for(cleaned = FALSE; !cleaned; ) {
tx_desc = E1000_TX_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
cleaned = (i == eop);
-#ifdef NETIF_F_TSO
- if (!(netdev->features & NETIF_F_TSO)) {
-#endif
- e1000_unmap_and_free_tx_resource(adapter,
- buffer_info);
-#ifdef NETIF_F_TSO
- } else {
- if (cleaned) {
- memcpy(&tx_ring->previous_buffer_info,
- buffer_info,
- sizeof(struct e1000_buffer));
- memset(buffer_info, 0,
- sizeof(struct e1000_buffer));
- } else {
- e1000_unmap_and_free_tx_resource(
- adapter, buffer_info);
- }
- }
-#endif
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
tx_desc->buffer_addr = 0;
tx_desc->lower.data = 0;
@@ -3318,12 +3308,6 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
netif_stop_queue(netdev);
}
}
-#ifdef NETIF_F_TSO
- if (unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
- time_after(jiffies, tx_ring->previous_buffer_info.time_stamp + HZ)))
- e1000_unmap_and_free_tx_resource(
- adapter, &tx_ring->previous_buffer_info);
-#endif
return cleaned;
}