aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/hotplug
diff options
context:
space:
mode:
authorTaku Izumi <izumi.taku@jp.fujitsu.com>2008-10-23 11:54:39 +0900
committerJesse Barnes <jbarnes@virtuousgeek.org>2008-10-23 16:14:00 -0700
commitbe7bce250a88fbbb5a67204eb148bce8b798780a (patch)
treec30a5f7f145e4b4ab59f139b529eb170fa00f682 /drivers/pci/hotplug
parentf98ca311f3a32e2adc229fecd6bf732db07fcca3 (diff)
PCI hotplug: shpchp: message refinement
This patch refines messages in shpchp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Diffstat (limited to 'drivers/pci/hotplug')
-rw-r--r--drivers/pci/hotplug/shpchp.h9
-rw-r--r--drivers/pci/hotplug/shpchp_core.c34
-rw-r--r--drivers/pci/hotplug/shpchp_ctrl.c54
-rw-r--r--drivers/pci/hotplug/shpchp_hpc.c73
-rw-r--r--drivers/pci/hotplug/shpchp_pci.c14
5 files changed, 86 insertions, 98 deletions
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index 0d48d38cbf4..6aba0b6cf2e 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -253,7 +253,7 @@ static inline struct slot *shpchp_find_slot(struct controller *ctrl, u8 device)
return slot;
}
- ctrl_err(ctrl, "%s: slot (device=0x%x) not found\n", __func__, device);
+ ctrl_err(ctrl, "Slot (device=0x%02x) not found\n", device);
return NULL;
}
@@ -288,8 +288,8 @@ static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot)
perr_set = pcix_bridge_errors_reg & PERR_OBSERVED_MASK;
if (perr_set) {
ctrl_dbg(p_slot->ctrl,
- "%s W1C: Bridge_Errors[ PERR_OBSERVED = %08X]\n",
- __func__ , perr_set);
+ "Bridge_Errors[ PERR_OBSERVED = %08X] (W1C)\n",
+ perr_set);
pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, perr_set);
}
@@ -298,8 +298,7 @@ static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot)
pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, &pcix_mem_base_reg);
rse_set = pcix_mem_base_reg & RSE_MASK;
if (rse_set) {
- ctrl_dbg(p_slot->ctrl, "%s W1C: Memory_Base_Limit[ RSE ]\n",
- __func__);
+ ctrl_dbg(p_slot->ctrl, "Memory_Base_Limit[ RSE ] (W1C)\n");
pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, rse_set);
}
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 214633bf4ab..fe8d149c229 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -89,7 +89,7 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
{
struct slot *slot = hotplug_slot->private;
- ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+ ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
kfree(slot->hotplug_slot->info);
@@ -136,9 +136,11 @@ static int init_slots(struct controller *ctrl)
snprintf(name, SLOT_NAME_SIZE, "%d", slot->number);
hotplug_slot->ops = &shpchp_hotplug_slot_ops;
- ctrl_dbg(ctrl, "Registering bus=%x dev=%x hp_slot=%x sun=%x "
- "slot_device_offset=%x\n", slot->bus, slot->device,
- slot->hp_slot, slot->number, ctrl->slot_device_offset);
+ ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x "
+ "hp_slot=%x sun=%x slot_device_offset=%x\n",
+ pci_domain_nr(ctrl->pci_dev->subordinate),
+ slot->bus, slot->device, slot->hp_slot, slot->number,
+ ctrl->slot_device_offset);
retval = pci_hp_register(slot->hotplug_slot,
ctrl->pci_dev->subordinate, slot->device, name);
if (retval) {
@@ -189,7 +191,7 @@ static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status)
{
struct slot *slot = get_slot(hotplug_slot);
- ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+ ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
hotplug_slot->info->attention_status = status;
@@ -202,7 +204,7 @@ static int enable_slot (struct hotplug_slot *hotplug_slot)
{
struct slot *slot = get_slot(hotplug_slot);
- ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+ ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
return shpchp_sysfs_enable_slot(slot);
@@ -212,7 +214,7 @@ static int disable_slot (struct hotplug_slot *hotplug_slot)
{
struct slot *slot = get_slot(hotplug_slot);
- ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+ ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
return shpchp_sysfs_disable_slot(slot);
@@ -223,7 +225,7 @@ static int get_power_status (struct hotplug_slot *hotplug_slot, u8 *value)
struct slot *slot = get_slot(hotplug_slot);
int retval;
- ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+ ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
retval = slot->hpc_ops->get_power_status(slot, value);
@@ -238,7 +240,7 @@ static int get_attention_status (struct hotplug_slot *hotplug_slot, u8 *value)
struct slot *slot = get_slot(hotplug_slot);
int retval;
- ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+ ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
retval = slot->hpc_ops->get_attention_status(slot, value);
@@ -253,7 +255,7 @@ static int get_latch_status (struct hotplug_slot *hotplug_slot, u8 *value)
struct slot *slot = get_slot(hotplug_slot);
int retval;
- ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+ ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
retval = slot->hpc_ops->get_latch_status(slot, value);
@@ -268,7 +270,7 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
struct slot *slot = get_slot(hotplug_slot);
int retval;
- ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+ ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
retval = slot->hpc_ops->get_adapter_status(slot, value);
@@ -284,7 +286,7 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
struct slot *slot = get_slot(hotplug_slot);
int retval;
- ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+ ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
retval = slot->hpc_ops->get_max_bus_speed(slot, value);
@@ -299,7 +301,7 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp
struct slot *slot = get_slot(hotplug_slot);
int retval;
- ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+ ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
@@ -331,14 +333,14 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
if (!ctrl) {
- dev_err(&pdev->dev, "%s : out of memory\n", __func__);
+ dev_err(&pdev->dev, "%s: Out of memory\n", __func__);
goto err_out_none;
}
INIT_LIST_HEAD(&ctrl->slot_list);
rc = shpc_init(ctrl, pdev);
if (rc) {
- ctrl_dbg(ctrl, "controller initialization failed\n");
+ ctrl_dbg(ctrl, "Controller initialization failed\n");
goto err_out_free_ctrl;
}
@@ -347,7 +349,7 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Setup the slot information structures */
rc = init_slots(ctrl);
if (rc) {
- ctrl_err(ctrl, "slot initialization failed\n");
+ ctrl_err(ctrl, "Slot initialization failed\n");
goto err_out_release_ctlr;
}
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index c9049f17864..b8ab2796e66 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -62,7 +62,7 @@ u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
u32 event_type;
/* Attention Button Change */
- ctrl_dbg(ctrl, "Attention button interrupt received.\n");
+ ctrl_dbg(ctrl, "Attention button interrupt received\n");
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
@@ -86,13 +86,13 @@ u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
u32 event_type;
/* Switch Change */
- ctrl_dbg(ctrl, "Switch interrupt received.\n");
+ ctrl_dbg(ctrl, "Switch interrupt received\n");
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
- ctrl_dbg(ctrl, "%s: Card present %x Power status %x\n",
- __func__, p_slot->presence_save, p_slot->pwr_save);
+ ctrl_dbg(ctrl, "Card present %x Power status %x\n",
+ p_slot->presence_save, p_slot->pwr_save);
if (getstatus) {
/*
@@ -123,7 +123,7 @@ u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
u32 event_type;
/* Presence Change */
- ctrl_dbg(ctrl, "Presence/Notify input change.\n");
+ ctrl_dbg(ctrl, "Presence/Notify input change\n");
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
@@ -158,7 +158,7 @@ u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
u32 event_type;
/* Power fault */
- ctrl_dbg(ctrl, "Power fault interrupt received.\n");
+ ctrl_dbg(ctrl, "Power fault interrupt received\n");
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
@@ -178,7 +178,7 @@ u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
event_type = INT_POWER_FAULT;
/* set power fault status for this board */
p_slot->status = 0xFF;
- ctrl_info(ctrl, "power fault bit %x set\n", hp_slot);
+ ctrl_info(ctrl, "Power fault bit %x set\n", hp_slot);
}
queue_interrupt_event(p_slot, event_type);
@@ -194,7 +194,7 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
{
int rc = 0;
- ctrl_dbg(ctrl, "%s: change to speed %d\n", __func__, speed);
+ ctrl_dbg(ctrl, "Change speed to %d\n", speed);
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
ctrl_err(ctrl, "%s: Issue of set bus speed mode command "
"failed\n", __func__);
@@ -215,8 +215,8 @@ static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
*/
if (flag) {
if (asp < bsp) {
- ctrl_err(ctrl, "%s: speed of bus %x and adapter %x "
- "mismatch\n", __func__, bsp, asp);
+ ctrl_err(ctrl, "Speed of bus %x and adapter %x "
+ "mismatch\n", bsp, asp);
rc = WRONG_BUS_FREQUENCY;
}
return rc;
@@ -246,6 +246,7 @@ static int board_added(struct slot *p_slot)
int rc = 0;
enum pci_bus_speed asp, bsp, msp;
struct controller *ctrl = p_slot->ctrl;
+ struct pci_bus *parent = ctrl->pci_dev->subordinate;
hp_slot = p_slot->device - ctrl->slot_device_offset;
@@ -256,7 +257,7 @@ static int board_added(struct slot *p_slot)
/* Power on slot without connecting to bus */
rc = p_slot->hpc_ops->power_on_slot(p_slot);
if (rc) {
- ctrl_err(ctrl, "%s: Failed to power on slot\n", __func__);
+ ctrl_err(ctrl, "Failed to power on slot\n");
return -1;
}
@@ -272,29 +273,27 @@ static int board_added(struct slot *p_slot)
/* turn on board, blink green LED, turn off Amber LED */
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
- ctrl_err(ctrl, "%s: Issue of Slot Enable command"
- " failed\n", __func__);
+ ctrl_err(ctrl, "Issue of Slot Enable command failed\n");
return rc;
}
}
rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp);
if (rc) {
- ctrl_err(ctrl, "%s: Can't get adapter speed or bus mode "
- "mismatch\n", __func__);
+ ctrl_err(ctrl, "Can't get adapter speed or "
+ "bus mode mismatch\n");
return WRONG_BUS_FREQUENCY;
}
rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp);
if (rc) {
- ctrl_err(ctrl, "%s: Can't get bus operation speed\n", __func__);
+ ctrl_err(ctrl, "Can't get bus operation speed\n");
return WRONG_BUS_FREQUENCY;
}
rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp);
if (rc) {
- ctrl_err(ctrl, "%s: Can't get max bus operation speed\n",
- __func__);
+ ctrl_err(ctrl, "Can't get max bus operation speed\n");
msp = bsp;
}
@@ -312,8 +311,7 @@ static int board_added(struct slot *p_slot)
/* turn on board, blink green LED, turn off Amber LED */
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
- ctrl_err(ctrl, "%s: Issue of Slot Enable command failed\n",
- __func__);
+ ctrl_err(ctrl, "Issue of Slot Enable command failed\n");
return rc;
}
@@ -324,15 +322,15 @@ static int board_added(struct slot *p_slot)
/* Check for a power fault */
if (p_slot->status == 0xFF) {
/* power fault occurred, but it was benign */
- ctrl_dbg(ctrl, "%s: power fault\n", __func__);
+ ctrl_dbg(ctrl, "%s: Power fault\n", __func__);
rc = POWER_FAILURE;
p_slot->status = 0;
goto err_exit;
}
if (shpchp_configure_device(p_slot)) {
- ctrl_err(ctrl, "Cannot add device at 0x%x:0x%x\n",
- p_slot->bus, p_slot->device);
+ ctrl_err(ctrl, "Cannot add device at %04x:%02x:%02x\n",
+ pci_domain_nr(parent), p_slot->bus, p_slot->device);
goto err_exit;
}
@@ -373,7 +371,7 @@ static int remove_board(struct slot *p_slot)
hp_slot = p_slot->device - ctrl->slot_device_offset;
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
- ctrl_dbg(ctrl, "In %s, hp_slot = %d\n", __func__, hp_slot);
+ ctrl_dbg(ctrl, "%s: hp_slot = %d\n", __func__, hp_slot);
/* Change status to shutdown */
if (p_slot->is_a_board)
@@ -389,8 +387,7 @@ static int remove_board(struct slot *p_slot)
rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
if (rc) {
- ctrl_err(ctrl, "%s: Issue of Set Attention command failed\n",
- __func__);
+ ctrl_err(ctrl, "Issue of Set Attention command failed\n");
return rc;
}
@@ -526,7 +523,6 @@ static void handle_button_press_event(struct slot *p_slot)
*/
ctrl_info(ctrl, "Button cancel on Slot(%s)\n",
slot_name(p_slot));
- ctrl_dbg(ctrl, "%s: button cancel\n", __func__);
cancel_delayed_work(&p_slot->work);
if (p_slot->state == BLINKINGOFF_STATE)
p_slot->hpc_ops->green_led_on(p_slot);
@@ -565,7 +561,7 @@ static void interrupt_event_handler(struct work_struct *work)
handle_button_press_event(p_slot);
break;
case INT_POWER_FAULT:
- ctrl_dbg(p_slot->ctrl, "%s: power fault\n", __func__);
+ ctrl_dbg(p_slot->ctrl, "%s: Power fault\n", __func__);
p_slot->hpc_ops->set_attention_status(p_slot, 1);
p_slot->hpc_ops->green_led_off(p_slot);
break;
@@ -660,7 +656,7 @@ static int shpchp_disable_slot (struct slot *p_slot)
}
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || !getstatus) {
- ctrl_info(ctrl, "Already disabled slot(%s)\n",
+ ctrl_info(ctrl, "Already disabled on slot(%s)\n",
slot_name(p_slot));
goto out;
}
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 2b69a08326b..86dc3984776 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -320,8 +320,7 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
if (!shpc_poll_ctrl_busy(ctrl)) {
/* After 1 sec and and the controller is still busy */
- ctrl_err(ctrl, "%s : Controller is still busy after 1 sec.\n",
- __func__);
+ ctrl_err(ctrl, "Controller is still busy after 1 sec\n");
retval = -EBUSY;
goto out;
}
@@ -344,8 +343,9 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
cmd_status = hpc_check_cmd_status(slot->ctrl);
if (cmd_status) {
- ctrl_err(ctrl, "%s: Failed to issued command 0x%x "
- "(error code = %d)\n", __func__, cmd, cmd_status);
+ ctrl_err(ctrl,
+ "Failed to issued command 0x%x (error code = %d)\n",
+ cmd, cmd_status);
retval = -EIO;
}
out:
@@ -364,15 +364,15 @@ static int hpc_check_cmd_status(struct controller *ctrl)
break;
case 1:
retval = SWITCH_OPEN;
- ctrl_err(ctrl, "%s: Switch opened!\n", __func__);
+ ctrl_err(ctrl, "Switch opened!\n");
break;
case 2:
retval = INVALID_CMD;
- ctrl_err(ctrl, "%s: Invalid HPC command!\n", __func__);
+ ctrl_err(ctrl, "Invalid HPC command!\n");
break;
case 4:
retval = INVALID_SPEED_MODE;
- ctrl_err(ctrl, "%s: Invalid bus speed/mode!\n", __func__);
+ ctrl_err(ctrl, "Invalid bus speed/mode!\n");
break;
default:
retval = cmd_status;
@@ -773,8 +773,8 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
continue;
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
- ctrl_dbg(ctrl, "%s: Slot %x with intr, slot register = %x\n",
- __func__, hp_slot, slot_reg);
+ ctrl_dbg(ctrl, "Slot %x with intr, slot register = %x\n",
+ hp_slot, slot_reg);
if (slot_reg & MRL_CHANGE_DETECTED)
shpchp_handle_switch_change(hp_slot, ctrl);
@@ -949,6 +949,7 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
u8 i;
ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */
+ ctrl_dbg(ctrl, "Hotplug Controller:\n");
if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device ==
PCI_DEVICE_ID_AMD_GOLAM_7450)) {
@@ -958,38 +959,33 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
} else {
ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC);
if (!ctrl->cap_offset) {
- ctrl_err(ctrl, "%s : cap_offset == 0\n", __func__);
+ ctrl_err(ctrl, "Cannot find PCI capability\n");
goto abort;
}
- ctrl_dbg(ctrl, "%s: cap_offset = %x\n", __func__,
- ctrl->cap_offset);
+ ctrl_dbg(ctrl, " cap_offset = %x\n", ctrl->cap_offset);
rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset);
if (rc) {
- ctrl_err(ctrl, "%s: cannot read base_offset\n",
- __func__);
+ ctrl_err(ctrl, "Cannot read base_offset\n");
goto abort;
}
rc = shpc_indirect_read(ctrl, 3, &tempdword);
if (rc) {
- ctrl_err(ctrl, "%s: cannot read slot config\n",
- __func__);
+ ctrl_err(ctrl, "Cannot read slot config\n");
goto abort;
}
num_slots = tempdword & SLOT_NUM;
- ctrl_dbg(ctrl, "%s: num_slots (indirect) %x\n",
- __func__, num_slots);
+ ctrl_dbg(ctrl, " num_slots (indirect) %x\n", num_slots);
for (i = 0; i < 9 + num_slots; i++) {
rc = shpc_indirect_read(ctrl, i, &tempdword);
if (rc) {
- ctrl_err(ctrl, "%s: cannot read creg "
- "(index = %d)\n", __func__, i);
+ ctrl_err(ctrl,
+ "Cannot read creg (index = %d)\n", i);
goto abort;
}
- ctrl_dbg(ctrl, "%s: offset %d: value %x\n",
- __func__, i, tempdword);
+ ctrl_dbg(ctrl, " offset %d: value %x\n", i, tempdword);
}
ctrl->mmio_base =
@@ -1003,25 +999,25 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
rc = pci_enable_device(pdev);
if (rc) {
- ctrl_err(ctrl, "%s: pci_enable_device failed\n", __func__);
+ ctrl_err(ctrl, "pci_enable_device failed\n");
goto abort;
}
if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) {
- ctrl_err(ctrl, "%s: cannot reserve MMIO region\n", __func__);
+ ctrl_err(ctrl, "Cannot reserve MMIO region\n");
rc = -1;
goto abort;
}
ctrl->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size);
if (!ctrl->creg) {
- ctrl_err(ctrl, "%s: cannot remap MMIO region %lx @ %lx\n",
- __func__, ctrl->mmio_size, ctrl->mmio_base);
+ ctrl_err(ctrl, "Cannot remap MMIO region %lx @ %lx\n",
+ ctrl->mmio_size, ctrl->mmio_base);
release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
rc = -1;
goto abort;
}
- ctrl_dbg(ctrl, "%s: ctrl->creg %p\n", __func__, ctrl->creg);
+ ctrl_dbg(ctrl, "ctrl->creg %p\n", ctrl->creg);
mutex_init(&ctrl->crit_sect);
mutex_init(&ctrl->cmd_lock);
@@ -1040,21 +1036,21 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
/* Mask Global Interrupt Mask & Command Complete Interrupt Mask */
tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
- ctrl_dbg(ctrl, "%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
+ ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword);
tempdword |= (GLOBAL_INTR_MASK | GLOBAL_SERR_MASK |
COMMAND_INTR_MASK | ARBITER_SERR_MASK);
tempdword &= ~SERR_INTR_RSVDZ_MASK;
shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
- ctrl_dbg(ctrl, "%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
+ ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword);
/* Mask the MRL sensor SERR Mask of individual slot in
* Slot SERR-INT Mask & clear all the existing event if any
*/
for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
- ctrl_dbg(ctrl, "%s: Default Logical Slot Register %d "
- "value %x\n", __func__, hp_slot, slot_reg);
+ ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n",
+ hp_slot, slot_reg);
slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
CON_PFAULT_INTR_MASK | MRL_CHANGE_SERR_MASK |
@@ -1079,8 +1075,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
MY_NAME, (void *)ctrl);
- ctrl_dbg(ctrl, "%s: request_irq %d for hpc%d (returns %d)\n",
- __func__, ctrl->pci_dev->irq,
+ ctrl_dbg(ctrl, "request_irq %d for hpc%d (returns %d)\n",
+ ctrl->pci_dev->irq,
atomic_read(&shpchp_num_controllers), rc);
if (rc) {
ctrl_err(ctrl, "Can't get irq %d for the hotplug "
@@ -1088,9 +1084,7 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
goto abort_iounmap;
}
}
- ctrl_dbg(ctrl, "%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n",
- __func__, pdev->bus->number, PCI_SLOT(pdev->devfn),
- PCI_FUNC(pdev->devfn), pdev->irq);
+ ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq);
/*
* If this is the first controller to be initialized,
@@ -1109,8 +1103,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
*/
for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
- ctrl_dbg(ctrl, "%s: Default Logical Slot Register %d "
- "value %x\n", __func__, hp_slot, slot_reg);
+ ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n",
+ hp_slot, slot_reg);
slot_reg &= ~(PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
CON_PFAULT_INTR_MASK | SLOT_REG_RSVDZ_MASK);
@@ -1123,8 +1117,7 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
SERR_INTR_RSVDZ_MASK);
shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
- ctrl_dbg(ctrl, "%s: SERR_INTR_ENABLE = %x\n",
- __func__, tempdword);
+ ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword);
}
return 0;
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
index faecbfaa64f..138f161becc 100644
--- a/drivers/pci/hotplug/shpchp_pci.c
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -49,9 +49,7 @@ static void program_fw_provided_values(struct pci_dev *dev)
/* use default values if we can't get them from firmware */
if (get_hp_params_from_firmware(dev, &hpp) ||
!hpp.t0 || (hpp.t0->revision > 1)) {
- printk(KERN_WARNING
- "%s: Could not get hotplug parameters. Use defaults\n",
- __func__);
+ warn("Could not get hotplug parameters. Use defaults\n");
hpp.t0 = &hpp.type0_data;
hpp.t0->revision = 0;
hpp.t0->cache_line_size = 8;
@@ -105,9 +103,9 @@ int __ref shpchp_configure_device(struct slot *p_slot)
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
if (dev) {
- ctrl_err(ctrl,
- "Device %s already exists at %x:%x, cannot hot-add\n",
- pci_name(dev), p_slot->bus, p_slot->device);
+ ctrl_err(ctrl, "Device %s already exists "
+ "at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev),
+ pci_domain_nr(parent), p_slot->bus, p_slot->device);
pci_dev_put(dev);
return -EINVAL;
}
@@ -173,8 +171,8 @@ int shpchp_unconfigure_device(struct slot *p_slot)
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
struct controller *ctrl = p_slot->ctrl;
- ctrl_dbg(ctrl, "%s: bus/dev = %x/%x\n",
- __func__, p_slot->bus, p_slot->device);
+ ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n",
+ __func__, pci_domain_nr(parent), p_slot->bus, p_slot->device);
for (j=0; j<8 ; j++) {
struct pci_dev* temp = pci_get_slot(parent,