Merge /spare/repo/linux-2.6/

1 files changed, 91 insertions, 13 deletions

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index c62d2f04339..992db89adce 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -222,6 +222,37 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res)
 }
 
 /**
+ * pci_restore_bars - restore a devices BAR values (e.g. after wake-up)
+ * @dev: PCI device to have its BARs restored
+ *
+ * Restore the BAR values for a given device, so as to make it
+ * accessible by its driver.
+ */
+void
+pci_restore_bars(struct pci_dev *dev)
+{
+	int i, numres;
+
+	switch (dev->hdr_type) {
+	case PCI_HEADER_TYPE_NORMAL:
+		numres = 6;
+		break;
+	case PCI_HEADER_TYPE_BRIDGE:
+		numres = 2;
+		break;
+	case PCI_HEADER_TYPE_CARDBUS:
+		numres = 1;
+		break;
+	default:
+		/* Should never get here, but just in case... */
+		return;
+	}
+
+	for (i = 0; i < numres; i ++)
+		pci_update_resource(dev, &dev->resource[i], i);
+}
+
+/**
  * pci_set_power_state - Set the power state of a PCI device
  * @dev: PCI device to be suspended
  * @state: PCI power state (D0, D1, D2, D3hot, D3cold) we're entering
@@ -239,7 +270,7 @@ int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
 int
 pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 {
-	int pm;
+	int pm, need_restore = 0;
 	u16 pmcsr, pmc;
 
 	/* bound the state we're entering */
@@ -263,7 +294,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 		return -EIO; 
 
 	pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc);
-	if ((pmc & PCI_PM_CAP_VER_MASK) > 2) {
+	if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
 		printk(KERN_DEBUG
 		       "PCI: %s has unsupported PM cap regs version (%u)\n",
 		       pci_name(dev), pmc & PCI_PM_CAP_VER_MASK);
@@ -271,21 +302,22 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 	}
 
 	/* check if this device supports the desired state */
-	if (state == PCI_D1 || state == PCI_D2) {
-		if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1))
-			return -EIO;
-		else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))
-			return -EIO;
-	}
+	if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1))
+		return -EIO;
+	else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))
+		return -EIO;
+
+	pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
 
 	/* If we're in D3, force entire word to 0.
 	 * This doesn't affect PME_Status, disables PME_En, and
 	 * sets PowerState to 0.
 	 */
-	if (dev->current_state >= PCI_D3hot)
+	if (dev->current_state >= PCI_D3hot) {
+		if (!(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
+			need_restore = 1;
 		pmcsr = 0;
-	else {
-		pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
+	} else {
 		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
 		pmcsr |= state;
 	}
@@ -308,6 +340,22 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 		platform_pci_set_power_state(dev, state);
 
 	dev->current_state = state;
+
+	/* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
+	 * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
+	 * from D3hot to D0 _may_ perform an internal reset, thereby
+	 * going to "D0 Uninitialized" rather than "D0 Initialized".
+	 * For example, at least some versions of the 3c905B and the
+	 * 3c556B exhibit this behaviour.
+	 *
+	 * At least some laptop BIOSen (e.g. the Thinkpad T21) leave
+	 * devices in a D3hot state at boot.  Consequently, we need to
+	 * restore at least the BARs so that the device will be
+	 * accessible to its driver.
+	 */
+	if (need_restore)
+		pci_restore_bars(dev);
+
 	return 0;
 }
 
@@ -394,8 +442,11 @@ pci_enable_device_bars(struct pci_dev *dev, int bars)
 {
 	int err;
 
-	pci_set_power_state(dev, PCI_D0);
-	if ((err = pcibios_enable_device(dev, bars)) < 0)
+	err = pci_set_power_state(dev, PCI_D0);
+	if (err < 0 && err != -EIO)
+		return err;
+	err = pcibios_enable_device(dev, bars);
+	if (err < 0)
 		return err;
 	return 0;
 }
@@ -747,6 +798,31 @@ pci_clear_mwi(struct pci_dev *dev)
 	}
 }
 
+/**
+ * pci_intx - enables/disables PCI INTx for device dev
+ * @dev: the PCI device to operate on
+ * @enable: boolean
+ *
+ * Enables/disables PCI INTx for device dev
+ */
+void
+pci_intx(struct pci_dev *pdev, int enable)
+{
+	u16 pci_command, new;
+
+	pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
+
+	if (enable) {
+		new = pci_command & ~PCI_COMMAND_INTX_DISABLE;
+	} else {
+		new = pci_command | PCI_COMMAND_INTX_DISABLE;
+	}
+
+	if (new != pci_command) {
+		pci_write_config_word(pdev, PCI_COMMAND, new);
+	}
+}
+
 #ifndef HAVE_ARCH_PCI_SET_DMA_MASK
 /*
  * These can be overridden by arch-specific implementations
@@ -809,6 +885,7 @@ struct pci_dev *isa_bridge;
 EXPORT_SYMBOL(isa_bridge);
 #endif
 
+EXPORT_SYMBOL_GPL(pci_restore_bars);
 EXPORT_SYMBOL(pci_enable_device_bars);
 EXPORT_SYMBOL(pci_enable_device);
 EXPORT_SYMBOL(pci_disable_device);
@@ -823,6 +900,7 @@ EXPORT_SYMBOL(pci_request_region);
 EXPORT_SYMBOL(pci_set_master);
 EXPORT_SYMBOL(pci_set_mwi);
 EXPORT_SYMBOL(pci_clear_mwi);
+EXPORT_SYMBOL_GPL(pci_intx);
 EXPORT_SYMBOL(pci_set_dma_mask);
 EXPORT_SYMBOL(pci_set_consistent_dma_mask);
 EXPORT_SYMBOL(pci_assign_resource);