aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
diff options
context:
space:
mode:
authorKeshavamurthy, Anil S <anil.s.keshavamurthy@intel.com>2007-10-21 16:41:41 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-22 08:13:18 -0700
commit10e5247f40f3bf7508a0ed2848c9cae37bddf4bc (patch)
treeadca606f00ebcbdbdc5c474f012105d7e59152f6 /drivers/pci
parent89910cccb8fec0c1140d33a743e72a712efd4f05 (diff)
Intel IOMMU: DMAR detection and parsing logic
This patch supports the upcomming Intel IOMMU hardware a.k.a. Intel(R) Virtualization Technology for Directed I/O Architecture and the hardware spec for the same can be found here http://www.intel.com/technology/virtualization/index.htm FAQ! (questions from akpm, answers from ak) > So... what's all this code for? > > I assume that the intent here is to speed things up under Xen, etc? Yes in some cases, but not this code. That would be the Xen version of this code that could potentially assign whole devices to guests. I expect this to be only useful in some special cases though because most hardware is not virtualizable and you typically want an own instance for each guest. Ok at some point KVM might implement this too; i likely would use this code for this. > Do we > have any benchmark results to help us to decide whether a merge would be > justified? The main advantage for doing it in the normal kernel is not performance, but more safety. Broken devices won't be able to corrupt memory by doing random DMA. Unfortunately that doesn't work for graphics yet, for that need user space interfaces for the X server are needed. There are some potential performance benefits too: - When you have a device that cannot address the complete address range an IOMMU can remap its memory instead of bounce buffering. Remapping is likely cheaper than copying. - The IOMMU can merge sg lists into a single virtual block. This could potentially speed up SG IO when the device is slow walking SG lists. [I long ago benchmarked 5% on some block benchmark with an old MPT Fusion; but it probably depends a lot on the HBA] And you get better driver debugging because unexpected memory accesses from the devices will cause a trappable event. > > Does it slow anything down? It adds more overhead to each IO so yes. This patch: Add support for early detection and parsing of DMAR's (DMA Remapping) reported to OS via ACPI tables. DMA remapping(DMAR) devices support enables independent address translations for Direct Memory Access(DMA) from Devices. These DMA remapping devices are reported via ACPI tables and includes pci device scope covered by these DMA remapping device. For detailed info on the specification of "Intel(R) Virtualization Technology for Directed I/O Architecture" please see http://www.intel.com/technology/virtualization/index.htm Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/Makefile3
-rw-r--r--drivers/pci/dmar.c329
2 files changed, 332 insertions, 0 deletions
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 006054a4099..836ab2f250d 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -20,6 +20,9 @@ obj-$(CONFIG_PCI_MSI) += msi.o
# Build the Hypertransport interrupt support
obj-$(CONFIG_HT_IRQ) += htirq.o
+# Build Intel IOMMU support
+obj-$(CONFIG_DMAR) += dmar.o
+
#
# Some architectures use the generic PCI setup functions
#
diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c
new file mode 100644
index 00000000000..5dfdfdac92e
--- /dev/null
+++ b/drivers/pci/dmar.c
@@ -0,0 +1,329 @@
+/*
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Copyright (C) Ashok Raj <ashok.raj@intel.com>
+ * Copyright (C) Shaohua Li <shaohua.li@intel.com>
+ * Copyright (C) Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+ *
+ * This file implements early detection/parsing of DMA Remapping Devices
+ * reported to OS through BIOS via DMA remapping reporting (DMAR) ACPI
+ * tables.
+ */
+
+#include <linux/pci.h>
+#include <linux/dmar.h>
+
+#undef PREFIX
+#define PREFIX "DMAR:"
+
+/* No locks are needed as DMA remapping hardware unit
+ * list is constructed at boot time and hotplug of
+ * these units are not supported by the architecture.
+ */
+LIST_HEAD(dmar_drhd_units);
+LIST_HEAD(dmar_rmrr_units);
+
+static struct acpi_table_header * __initdata dmar_tbl;
+
+static void __init dmar_register_drhd_unit(struct dmar_drhd_unit *drhd)
+{
+ /*
+ * add INCLUDE_ALL at the tail, so scan the list will find it at
+ * the very end.
+ */
+ if (drhd->include_all)
+ list_add_tail(&drhd->list, &dmar_drhd_units);
+ else
+ list_add(&drhd->list, &dmar_drhd_units);
+}
+
+static void __init dmar_register_rmrr_unit(struct dmar_rmrr_unit *rmrr)
+{
+ list_add(&rmrr->list, &dmar_rmrr_units);
+}
+
+static int __init dmar_parse_one_dev_scope(struct acpi_dmar_device_scope *scope,
+ struct pci_dev **dev, u16 segment)
+{
+ struct pci_bus *bus;
+ struct pci_dev *pdev = NULL;
+ struct acpi_dmar_pci_path *path;
+ int count;
+
+ bus = pci_find_bus(segment, scope->bus);
+ path = (struct acpi_dmar_pci_path *)(scope + 1);
+ count = (scope->length - sizeof(struct acpi_dmar_device_scope))
+ / sizeof(struct acpi_dmar_pci_path);
+
+ while (count) {
+ if (pdev)
+ pci_dev_put(pdev);
+ /*
+ * Some BIOSes list non-exist devices in DMAR table, just
+ * ignore it
+ */
+ if (!bus) {
+ printk(KERN_WARNING
+ PREFIX "Device scope bus [%d] not found\n",
+ scope->bus);
+ break;
+ }
+ pdev = pci_get_slot(bus, PCI_DEVFN(path->dev, path->fn));
+ if (!pdev) {
+ printk(KERN_WARNING PREFIX
+ "Device scope device [%04x:%02x:%02x.%02x] not found\n",
+ segment, bus->number, path->dev, path->fn);
+ break;
+ }
+ path ++;
+ count --;
+ bus = pdev->subordinate;
+ }
+ if (!pdev) {
+ printk(KERN_WARNING PREFIX
+ "Device scope device [%04x:%02x:%02x.%02x] not found\n",
+ segment, scope->bus, path->dev, path->fn);
+ *dev = NULL;
+ return 0;
+ }
+ if ((scope->entry_type == ACPI_DMAR_SCOPE_TYPE_ENDPOINT && \
+ pdev->subordinate) || (scope->entry_type == \
+ ACPI_DMAR_SCOPE_TYPE_BRIDGE && !pdev->subordinate)) {
+ pci_dev_put(pdev);
+ printk(KERN_WARNING PREFIX
+ "Device scope type does not match for %s\n",
+ pci_name(pdev));
+ return -EINVAL;
+ }
+ *dev = pdev;
+ return 0;
+}
+
+static int __init dmar_parse_dev_scope(void *start, void *end, int *cnt,
+ struct pci_dev ***devices, u16 segment)
+{
+ struct acpi_dmar_device_scope *scope;
+ void * tmp = start;
+ int index;
+ int ret;
+
+ *cnt = 0;
+ while (start < end) {
+ scope = start;
+ if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_ENDPOINT ||
+ scope->entry_type == ACPI_DMAR_SCOPE_TYPE_BRIDGE)
+ (*cnt)++;
+ else
+ printk(KERN_WARNING PREFIX
+ "Unsupported device scope\n");
+ start += scope->length;
+ }
+ if (*cnt == 0)
+ return 0;
+
+ *devices = kcalloc(*cnt, sizeof(struct pci_dev *), GFP_KERNEL);
+ if (!*devices)
+ return -ENOMEM;
+
+ start = tmp;
+ index = 0;
+ while (start < end) {
+ scope = start;
+ if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_ENDPOINT ||
+ scope->entry_type == ACPI_DMAR_SCOPE_TYPE_BRIDGE) {
+ ret = dmar_parse_one_dev_scope(scope,
+ &(*devices)[index], segment);
+ if (ret) {
+ kfree(*devices);
+ return ret;
+ }
+ index ++;
+ }
+ start += scope->length;
+ }
+
+ return 0;
+}
+
+/**
+ * dmar_parse_one_drhd - parses exactly one DMA remapping hardware definition
+ * structure which uniquely represent one DMA remapping hardware unit
+ * present in the platform
+ */
+static int __init
+dmar_parse_one_drhd(struct acpi_dmar_header *header)
+{
+ struct acpi_dmar_hardware_unit *drhd;
+ struct dmar_drhd_unit *dmaru;
+ int ret = 0;
+ static int include_all;
+
+ dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL);
+ if (!dmaru)
+ return -ENOMEM;
+
+ drhd = (struct acpi_dmar_hardware_unit *)header;
+ dmaru->reg_base_addr = drhd->address;
+ dmaru->include_all = drhd->flags & 0x1; /* BIT0: INCLUDE_ALL */
+
+ if (!dmaru->include_all)
+ ret = dmar_parse_dev_scope((void *)(drhd + 1),
+ ((void *)drhd) + header->length,
+ &dmaru->devices_cnt, &dmaru->devices,
+ drhd->segment);
+ else {
+ /* Only allow one INCLUDE_ALL */
+ if (include_all) {
+ printk(KERN_WARNING PREFIX "Only one INCLUDE_ALL "
+ "device scope is allowed\n");
+ ret = -EINVAL;
+ }
+ include_all = 1;
+ }
+
+ if (ret || (dmaru->devices_cnt == 0 && !dmaru->include_all))
+ kfree(dmaru);
+ else
+ dmar_register_drhd_unit(dmaru);
+ return ret;
+}
+
+static int __init
+dmar_parse_one_rmrr(struct acpi_dmar_header *header)
+{
+ struct acpi_dmar_reserved_memory *rmrr;
+ struct dmar_rmrr_unit *rmrru;
+ int ret = 0;
+
+ rmrru = kzalloc(sizeof(*rmrru), GFP_KERNEL);
+ if (!rmrru)
+ return -ENOMEM;
+
+ rmrr = (struct acpi_dmar_reserved_memory *)header;
+ rmrru->base_address = rmrr->base_address;
+ rmrru->end_address = rmrr->end_address;
+ ret = dmar_parse_dev_scope((void *)(rmrr + 1),
+ ((void *)rmrr) + header->length,
+ &rmrru->devices_cnt, &rmrru->devices, rmrr->segment);
+
+ if (ret || (rmrru->devices_cnt == 0))
+ kfree(rmrru);
+ else
+ dmar_register_rmrr_unit(rmrru);
+ return ret;
+}
+
+static void __init
+dmar_table_print_dmar_entry(struct acpi_dmar_header *header)
+{
+ struct acpi_dmar_hardware_unit *drhd;
+ struct acpi_dmar_reserved_memory *rmrr;
+
+ switch (header->type) {
+ case ACPI_DMAR_TYPE_HARDWARE_UNIT:
+ drhd = (struct acpi_dmar_hardware_unit *)header;
+ printk (KERN_INFO PREFIX
+ "DRHD (flags: 0x%08x)base: 0x%016Lx\n",
+ drhd->flags, drhd->address);
+ break;
+ case ACPI_DMAR_TYPE_RESERVED_MEMORY:
+ rmrr = (struct acpi_dmar_reserved_memory *)header;
+
+ printk (KERN_INFO PREFIX
+ "RMRR base: 0x%016Lx end: 0x%016Lx\n",
+ rmrr->base_address, rmrr->end_address);
+ break;
+ }
+}
+
+/**
+ * parse_dmar_table - parses the DMA reporting table
+ */
+static int __init
+parse_dmar_table(void)
+{
+ struct acpi_table_dmar *dmar;
+ struct acpi_dmar_header *entry_header;
+ int ret = 0;
+
+ dmar = (struct acpi_table_dmar *)dmar_tbl;
+ if (!dmar)
+ return -ENODEV;
+
+ if (!dmar->width) {
+ printk (KERN_WARNING PREFIX "Zero: Invalid DMAR haw\n");
+ return -EINVAL;
+ }
+
+ printk (KERN_INFO PREFIX "Host address width %d\n",
+ dmar->width + 1);
+
+ entry_header = (struct acpi_dmar_header *)(dmar + 1);
+ while (((unsigned long)entry_header) <
+ (((unsigned long)dmar) + dmar_tbl->length)) {
+ dmar_table_print_dmar_entry(entry_header);
+
+ switch (entry_header->type) {
+ case ACPI_DMAR_TYPE_HARDWARE_UNIT:
+ ret = dmar_parse_one_drhd(entry_header);
+ break;
+ case ACPI_DMAR_TYPE_RESERVED_MEMORY:
+ ret = dmar_parse_one_rmrr(entry_header);
+ break;
+ default:
+ printk(KERN_WARNING PREFIX
+ "Unknown DMAR structure type\n");
+ ret = 0; /* for forward compatibility */
+ break;
+ }
+ if (ret)
+ break;
+
+ entry_header = ((void *)entry_header + entry_header->length);
+ }
+ return ret;
+}
+
+
+int __init dmar_table_init(void)
+{
+
+ parse_dmar_table();
+ if (list_empty(&dmar_drhd_units)) {
+ printk(KERN_INFO PREFIX "No DMAR devices found\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/**
+ * early_dmar_detect - checks to see if the platform supports DMAR devices
+ */
+int __init early_dmar_detect(void)
+{
+ acpi_status status = AE_OK;
+
+ /* if we could find DMAR table, then there are DMAR devices */
+ status = acpi_get_table(ACPI_SIG_DMAR, 0,
+ (struct acpi_table_header **)&dmar_tbl);
+
+ if (ACPI_SUCCESS(status) && !dmar_tbl) {
+ printk (KERN_WARNING PREFIX "Unable to map DMAR\n");
+ status = AE_NOT_FOUND;
+ }
+
+ return (ACPI_SUCCESS(status) ? 1 : 0);
+}