aboutsummaryrefslogtreecommitdiff
path: root/drivers/pcmcia/cs.c
diff options
context:
space:
mode:
authorDaniel Ritz <daniel.ritz@gmx.ch>2005-06-23 00:10:12 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-06-23 09:45:31 -0700
commitfa912bcb06d5dc9525d8912a145db2bf4b7668c5 (patch)
tree5c62d9a1ef416c83d3e149ca94c4e646eb29daf2 /drivers/pcmcia/cs.c
parent7007cab53176dc906e67b4efa62f20ff1432805a (diff)
[PATCH] yenta TI: turn off interrupts during card power-on #2
- make boot-up card recognition more reliable (ie. redo interrogation always if there is no valid 'card inserted' state) (and yes, i saw it happening on an o2micro controller that both CB_CBARD and CB_16BITCARD bits were set at the same time) - also redo interrogation before probing the ISA interrupts. it's safer to do the probing with the socket in a clean state. - make card insert detect more reliable. yenta_get_status() now returns SS_PENDING as long as the card is not completley inserted and one of the voltage bits is set. also !CB_CBARD doesn't mean CB_16BITCARD. there is CB_NOTACARD as well, so make an explicit check for CB_16BITCARD. - for TI bridges: disable IRQs during power-on. in all-serial and tied interrupt mode the interrupts are always disabled for single-slot controllers. for two-slot contollers the disabling is only done when the other slot is empty. to force disabling there is a new module parameter now: pwr_irqs_off=Y (which is a regression for working setups. that's why it's an option, only use when required) - modparm to disable ISA interrupt probing (isa_probe, defaults to on) - remove unneeded code/cleanups (ie. merge yenta_events() into yenta_interrupts()) Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/pcmcia/cs.c')
-rw-r--r--drivers/pcmcia/cs.c11
1 files changed, 10 insertions, 1 deletions
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index 03fc885db1c..d136b3c8fac 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -508,6 +508,10 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
cs_err(skt, "unsupported voltage key.\n");
return CS_BAD_TYPE;
}
+
+ if (skt->power_hook)
+ skt->power_hook(skt, HOOK_POWER_PRE);
+
skt->socket.flags = 0;
skt->ops->set_socket(skt, &skt->socket);
@@ -522,7 +526,12 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
return CS_BAD_TYPE;
}
- return socket_reset(skt);
+ status = socket_reset(skt);
+
+ if (skt->power_hook)
+ skt->power_hook(skt, HOOK_POWER_POST);
+
+ return status;
}
/*