[SCSI] aic7xxx: upport all sequencer and core fixes from adaptec version 6.3.9

This patch upports all relevant code fixes and bumps the driver version
to 7.0 to signify starting a new tree.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 27 insertions, 9 deletions

diff --git a/drivers/scsi/aic7xxx/aic7xxx_93cx6.c b/drivers/scsi/aic7xxx/aic7xxx_93cx6.c
index 468d612a44f..3cb07e114e8 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_93cx6.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_93cx6.c
@@ -28,9 +28,7 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_93cx6.c#17 $
- *
- * $FreeBSD$
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_93cx6.c#19 $
  */
 
 /*
@@ -64,7 +62,6 @@
  *   is preceded by an initial zero (leading 0, followed by 16-bits, MSB
  *   first).  The clock cycling from low to high initiates the next data
  *   bit to be sent from the chip.
- *
  */
 
 #ifdef __linux__
@@ -81,14 +78,22 @@
  * Right now, we only have to read the SEEPROM.  But we make it easier to
  * add other 93Cx6 functions.
  */
-static struct seeprom_cmd {
+struct seeprom_cmd {
   	uint8_t len;
- 	uint8_t bits[9];
-} seeprom_read = {3, {1, 1, 0}};
+ 	uint8_t bits[11];
+};
 
+/* Short opcodes for the c46 */
 static struct seeprom_cmd seeprom_ewen = {9, {1, 0, 0, 1, 1, 0, 0, 0, 0}};
 static struct seeprom_cmd seeprom_ewds = {9, {1, 0, 0, 0, 0, 0, 0, 0, 0}};
+
+/* Long opcodes for the C56/C66 */
+static struct seeprom_cmd seeprom_long_ewen = {11, {1, 0, 0, 1, 1, 0, 0, 0, 0}};
+static struct seeprom_cmd seeprom_long_ewds = {11, {1, 0, 0, 0, 0, 0, 0, 0, 0}};
+
+/* Common opcodes */
 static struct seeprom_cmd seeprom_write = {3, {1, 0, 1}};
+static struct seeprom_cmd seeprom_read  = {3, {1, 1, 0}};
 
 /*
  * Wait for the SEERDY to go high; about 800 ns.
@@ -222,12 +227,25 @@ int
 ahc_write_seeprom(struct seeprom_descriptor *sd, uint16_t *buf,
 		  u_int start_addr, u_int count)
 {
+	struct seeprom_cmd *ewen, *ewds;
 	uint16_t v;
 	uint8_t temp;
 	int i, k;
 
 	/* Place the chip into write-enable mode */
-	send_seeprom_cmd(sd, &seeprom_ewen);
+	if (sd->sd_chip == C46) {
+		ewen = &seeprom_ewen;
+		ewds = &seeprom_ewds;
+	} else if (sd->sd_chip == C56_66) {
+		ewen = &seeprom_long_ewen;
+		ewds = &seeprom_long_ewds;
+	} else {
+		printf("ahc_write_seeprom: unsupported seeprom type %d\n",
+		       sd->sd_chip);
+		return (0);
+	}
+
+	send_seeprom_cmd(sd, ewen);
 	reset_seeprom(sd);
 
 	/* Write all requested data out to the seeprom. */
@@ -277,7 +295,7 @@ ahc_write_seeprom(struct seeprom_descriptor *sd, uint16_t *buf,
 	}
 
 	/* Put the chip back into write-protect mode */
-	send_seeprom_cmd(sd, &seeprom_ewds);
+	send_seeprom_cmd(sd, ewds);
 	reset_seeprom(sd);
 
 	return (1);