[SCSI] pm8001: add SAS/SATA HBA driver

This driver supports PMC-Sierra PCIe SAS/SATA 8x6G SPC 8001 chip based
host adapters.

Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Lindar Liu <lindar_liu@usish.com>
Signed-off-by: Tom Peng <tom_peng@usish.com>
Signed-off-by: Kevin Ao <aoqingyun@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

1 files changed, 480 insertions, 0 deletions

diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
new file mode 100644
index 00000000000..14c676bbb53
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -0,0 +1,480 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_SAS_H_
+#define _PM8001_SAS_H_
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
+#include <asm/atomic.h>
+#include "pm8001_defs.h"
+
+#define DRV_NAME		"pm8001"
+#define DRV_VERSION		"0.1.36"
+#define PM8001_FAIL_LOGGING	0x01 /* libsas EH function logging */
+#define PM8001_INIT_LOGGING	0x02 /* driver init logging */
+#define PM8001_DISC_LOGGING	0x04 /* discovery layer logging */
+#define PM8001_IO_LOGGING	0x08 /* I/O path logging */
+#define PM8001_EH_LOGGING	0x10 /* Error message logging */
+#define PM8001_IOCTL_LOGGING	0x20 /* IOCTL message logging */
+#define PM8001_MSG_LOGGING	0x40 /* misc message logging */
+#define pm8001_printk(format, arg...)	printk(KERN_INFO "%s %d:" format,\
+				__func__, __LINE__, ## arg)
+#define PM8001_CHECK_LOGGING(HBA, LEVEL, CMD)	\
+do {						\
+	if (unlikely(HBA->logging_level & LEVEL))	\
+		do {					\
+			CMD;				\
+		} while (0);				\
+} while (0);
+
+#define PM8001_EH_DBG(HBA, CMD)			\
+	PM8001_CHECK_LOGGING(HBA, PM8001_EH_LOGGING, CMD)
+
+#define PM8001_INIT_DBG(HBA, CMD)		\
+	PM8001_CHECK_LOGGING(HBA, PM8001_INIT_LOGGING, CMD)
+
+#define PM8001_DISC_DBG(HBA, CMD)		\
+	PM8001_CHECK_LOGGING(HBA, PM8001_DISC_LOGGING, CMD)
+
+#define PM8001_IO_DBG(HBA, CMD)		\
+	PM8001_CHECK_LOGGING(HBA, PM8001_IO_LOGGING, CMD)
+
+#define PM8001_FAIL_DBG(HBA, CMD)		\
+	PM8001_CHECK_LOGGING(HBA, PM8001_FAIL_LOGGING, CMD)
+
+#define PM8001_IOCTL_DBG(HBA, CMD)		\
+	PM8001_CHECK_LOGGING(HBA, PM8001_IOCTL_LOGGING, CMD)
+
+#define PM8001_MSG_DBG(HBA, CMD)		\
+	PM8001_CHECK_LOGGING(HBA, PM8001_MSG_LOGGING, CMD)
+
+
+#define PM8001_USE_TASKLET
+#define PM8001_USE_MSIX
+
+
+#define DEV_IS_EXPANDER(type)	((type == EDGE_DEV) || (type == FANOUT_DEV))
+
+#define PM8001_NAME_LENGTH		32/* generic length of strings */
+extern struct list_head hba_list;
+extern const struct pm8001_dispatch pm8001_8001_dispatch;
+
+struct pm8001_hba_info;
+struct pm8001_ccb_info;
+struct pm8001_device;
+struct pm8001_tmf_task;
+struct pm8001_dispatch {
+	char *name;
+	int (*chip_init)(struct pm8001_hba_info *pm8001_ha);
+	int (*chip_soft_rst)(struct pm8001_hba_info *pm8001_ha, u32 signature);
+	void (*chip_rst)(struct pm8001_hba_info *pm8001_ha);
+	int (*chip_ioremap)(struct pm8001_hba_info *pm8001_ha);
+	void (*chip_iounmap)(struct pm8001_hba_info *pm8001_ha);
+	void (*isr)(struct pm8001_hba_info *pm8001_ha);
+	u32 (*is_our_interupt)(struct pm8001_hba_info *pm8001_ha);
+	int (*isr_process_oq)(struct pm8001_hba_info *pm8001_ha);
+	void (*interrupt_enable)(struct pm8001_hba_info *pm8001_ha);
+	void (*interrupt_disable)(struct pm8001_hba_info *pm8001_ha);
+	void (*make_prd)(struct scatterlist *scatter, int nr, void *prd);
+	int (*smp_req)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_ccb_info *ccb);
+	int (*ssp_io_req)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_ccb_info *ccb);
+	int (*sata_req)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_ccb_info *ccb);
+	int (*phy_start_req)(struct pm8001_hba_info *pm8001_ha,	u8 phy_id);
+	int (*phy_stop_req)(struct pm8001_hba_info *pm8001_ha, u8 phy_id);
+	int (*reg_dev_req)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_device *pm8001_dev, u32 flag);
+	int (*dereg_dev_req)(struct pm8001_hba_info *pm8001_ha, u32 device_id);
+	int (*phy_ctl_req)(struct pm8001_hba_info *pm8001_ha,
+		u32 phy_id, u32 phy_op);
+	int (*task_abort)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_device *pm8001_dev, u8 flag, u32 task_tag,
+		u32 cmd_tag);
+	int (*ssp_tm_req)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf);
+	int (*get_nvmd_req)(struct pm8001_hba_info *pm8001_ha, void *payload);
+	int (*set_nvmd_req)(struct pm8001_hba_info *pm8001_ha, void *payload);
+	int (*fw_flash_update_req)(struct pm8001_hba_info *pm8001_ha,
+		void *payload);
+	int (*set_dev_state_req)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_device *pm8001_dev, u32 state);
+	int (*sas_diag_start_end_req)(struct pm8001_hba_info *pm8001_ha,
+		u32 state);
+	int (*sas_diag_execute_req)(struct pm8001_hba_info *pm8001_ha,
+		u32 state);
+};
+
+struct pm8001_chip_info {
+	u32	n_phy;
+	const struct pm8001_dispatch	*dispatch;
+};
+#define PM8001_CHIP_DISP	(pm8001_ha->chip->dispatch)
+
+struct pm8001_port {
+	struct asd_sas_port	sas_port;
+};
+
+struct pm8001_phy {
+	struct pm8001_hba_info	*pm8001_ha;
+	struct pm8001_port	*port;
+	struct asd_sas_phy	sas_phy;
+	struct sas_identify	identify;
+	struct scsi_device	*sdev;
+	u64			dev_sas_addr;
+	u32			phy_type;
+	struct completion	*enable_completion;
+	u32			frame_rcvd_size;
+	u8			frame_rcvd[32];
+	u8			phy_attached;
+	u8			phy_state;
+	enum sas_linkrate	minimum_linkrate;
+	enum sas_linkrate	maximum_linkrate;
+};
+
+struct pm8001_device {
+	enum sas_dev_type	dev_type;
+	struct domain_device	*sas_device;
+	u32			attached_phy;
+	u32			id;
+	struct completion	*dcompletion;
+	struct completion	*setds_completion;
+	u32			device_id;
+	u32			running_req;
+};
+
+struct pm8001_prd_imt {
+	__le32			len;
+	__le32			e;
+};
+
+struct pm8001_prd {
+	__le64			addr;		/* 64-bit buffer address */
+	struct pm8001_prd_imt	im_len;		/* 64-bit length */
+} __attribute__ ((packed));
+/*
+ * CCB(Command Control Block)
+ */
+struct pm8001_ccb_info {
+	struct list_head	entry;
+	struct sas_task		*task;
+	u32			n_elem;
+	u32			ccb_tag;
+	dma_addr_t		ccb_dma_handle;
+	struct pm8001_device	*device;
+	struct pm8001_prd	buf_prd[PM8001_MAX_DMA_SG];
+	struct fw_control_ex	*fw_control_context;
+};
+
+struct mpi_mem {
+	void			*virt_ptr;
+	dma_addr_t		phys_addr;
+	u32			phys_addr_hi;
+	u32			phys_addr_lo;
+	u32			total_len;
+	u32			num_elements;
+	u32			element_size;
+	u32			alignment;
+};
+
+struct mpi_mem_req {
+	/* The number of element in the  mpiMemory array */
+	u32			count;
+	/* The array of structures that define memroy regions*/
+	struct mpi_mem		region[USI_MAX_MEMCNT];
+};
+
+struct main_cfg_table {
+	u32			signature;
+	u32			interface_rev;
+	u32			firmware_rev;
+	u32			max_out_io;
+	u32			max_sgl;
+	u32			ctrl_cap_flag;
+	u32			gst_offset;
+	u32			inbound_queue_offset;
+	u32			outbound_queue_offset;
+	u32			inbound_q_nppd_hppd;
+	u32			outbound_hw_event_pid0_3;
+	u32			outbound_hw_event_pid4_7;
+	u32			outbound_ncq_event_pid0_3;
+	u32			outbound_ncq_event_pid4_7;
+	u32			outbound_tgt_ITNexus_event_pid0_3;
+	u32			outbound_tgt_ITNexus_event_pid4_7;
+	u32			outbound_tgt_ssp_event_pid0_3;
+	u32			outbound_tgt_ssp_event_pid4_7;
+	u32			outbound_tgt_smp_event_pid0_3;
+	u32			outbound_tgt_smp_event_pid4_7;
+	u32			upper_event_log_addr;
+	u32			lower_event_log_addr;
+	u32			event_log_size;
+	u32			event_log_option;
+	u32			upper_iop_event_log_addr;
+	u32			lower_iop_event_log_addr;
+	u32			iop_event_log_size;
+	u32			iop_event_log_option;
+	u32			fatal_err_interrupt;
+	u32			fatal_err_dump_offset0;
+	u32			fatal_err_dump_length0;
+	u32			fatal_err_dump_offset1;
+	u32			fatal_err_dump_length1;
+	u32			hda_mode_flag;
+	u32			anolog_setup_table_offset;
+};
+struct general_status_table {
+	u32			gst_len_mpistate;
+	u32			iq_freeze_state0;
+	u32			iq_freeze_state1;
+	u32			msgu_tcnt;
+	u32			iop_tcnt;
+	u32			reserved;
+	u32			phy_state[8];
+	u32			reserved1;
+	u32			reserved2;
+	u32			reserved3;
+	u32			recover_err_info[8];
+};
+struct inbound_queue_table {
+	u32			element_pri_size_cnt;
+	u32			upper_base_addr;
+	u32			lower_base_addr;
+	u32			ci_upper_base_addr;
+	u32			ci_lower_base_addr;
+	u32			pi_pci_bar;
+	u32			pi_offset;
+	u32			total_length;
+	void			*base_virt;
+	void			*ci_virt;
+	u32			reserved;
+	__le32			consumer_index;
+	u32			producer_idx;
+};
+struct outbound_queue_table {
+	u32			element_size_cnt;
+	u32			upper_base_addr;
+	u32			lower_base_addr;
+	void			*base_virt;
+	u32			pi_upper_base_addr;
+	u32			pi_lower_base_addr;
+	u32			ci_pci_bar;
+	u32			ci_offset;
+	u32			total_length;
+	void			*pi_virt;
+	u32			interrup_vec_cnt_delay;
+	u32			dinterrup_to_pci_offset;
+	__le32			producer_index;
+	u32			consumer_idx;
+};
+struct pm8001_hba_memspace {
+	void __iomem  		*memvirtaddr;
+	u64			membase;
+	u32			memsize;
+};
+struct pm8001_hba_info {
+	char			name[PM8001_NAME_LENGTH];
+	struct list_head	list;
+	unsigned long		flags;
+	spinlock_t		lock;/* host-wide lock */
+	struct pci_dev		*pdev;/* our device */
+	struct device		*dev;
+	struct pm8001_hba_memspace io_mem[6];
+	struct mpi_mem_req	memoryMap;
+	void __iomem	*msg_unit_tbl_addr;/*Message Unit Table Addr*/
+	void __iomem	*main_cfg_tbl_addr;/*Main Config Table Addr*/
+	void __iomem	*general_stat_tbl_addr;/*General Status Table Addr*/
+	void __iomem	*inbnd_q_tbl_addr;/*Inbound Queue Config Table Addr*/
+	void __iomem	*outbnd_q_tbl_addr;/*Outbound Queue Config Table Addr*/
+	struct main_cfg_table	main_cfg_tbl;
+	struct general_status_table	gs_tbl;
+	struct inbound_queue_table	inbnd_q_tbl[PM8001_MAX_INB_NUM];
+	struct outbound_queue_table	outbnd_q_tbl[PM8001_MAX_OUTB_NUM];
+	u8			sas_addr[SAS_ADDR_SIZE];
+	struct sas_ha_struct	*sas;/* SCSI/SAS glue */
+	struct Scsi_Host	*shost;
+	u32			chip_id;
+	const struct pm8001_chip_info	*chip;
+	struct completion	*nvmd_completion;
+	int			tags_num;
+	unsigned long		*tags;
+	struct pm8001_phy	phy[PM8001_MAX_PHYS];
+	struct pm8001_port	port[PM8001_MAX_PHYS];
+	u32			id;
+	u32			irq;
+	struct pm8001_device	*devices;
+	struct pm8001_ccb_info	*ccb_info;
+#ifdef PM8001_USE_MSIX
+	struct msix_entry	msix_entries[16];/*for msi-x interrupt*/
+	int			number_of_intr;/*will be used in remove()*/
+#endif
+#ifdef PM8001_USE_TASKLET
+	struct tasklet_struct	tasklet;
+#endif
+	struct list_head 	wq_list;
+	u32			logging_level;
+	u32			fw_status;
+	const struct firmware 	*fw_image;
+};
+
+struct pm8001_wq {
+	struct delayed_work work_q;
+	struct pm8001_hba_info *pm8001_ha;
+	void *data;
+	int handler;
+	struct list_head entry;
+};
+
+struct pm8001_fw_image_header {
+	u8 vender_id[8];
+	u8 product_id;
+	u8 hardware_rev;
+	u8 dest_partition;
+	u8 reserved;
+	u8 fw_rev[4];
+	__be32  image_length;
+	__be32 image_crc;
+	__be32 startup_entry;
+} __attribute__((packed, aligned(4)));
+
+/* define task management IU */
+struct pm8001_tmf_task {
+	u8	tmf;
+	u32	tag_of_task_to_be_managed;
+};
+/**
+ * FW Flash Update status values
+ */
+#define FLASH_UPDATE_COMPLETE_PENDING_REBOOT	0x00
+#define FLASH_UPDATE_IN_PROGRESS		0x01
+#define FLASH_UPDATE_HDR_ERR			0x02
+#define FLASH_UPDATE_OFFSET_ERR			0x03
+#define FLASH_UPDATE_CRC_ERR			0x04
+#define FLASH_UPDATE_LENGTH_ERR			0x05
+#define FLASH_UPDATE_HW_ERR			0x06
+#define FLASH_UPDATE_DNLD_NOT_SUPPORTED		0x10
+#define FLASH_UPDATE_DISABLED			0x11
+
+/**
+ * brief param structure for firmware flash update.
+ */
+struct fw_flash_updata_info {
+	u32			cur_image_offset;
+	u32			cur_image_len;
+	u32			total_image_len;
+	struct pm8001_prd	sgl;
+};
+
+struct fw_control_info {
+	u32			retcode;/*ret code (status)*/
+	u32			phase;/*ret code phase*/
+	u32			phaseCmplt;/*percent complete for the current
+	update phase */
+	u32			version;/*Hex encoded firmware version number*/
+	u32			offset;/*Used for downloading firmware	*/
+	u32			len; /*len of buffer*/
+	u32			size;/* Used in OS VPD and Trace get size
+	operations.*/
+	u32			reserved;/* padding required for 64 bit
+	alignment */
+	u8			buffer[1];/* Start of buffer */
+};
+struct fw_control_ex {
+	struct fw_control_info *fw_control;
+	void			*buffer;/* keep buffer pointer to be
+	freed when the responce comes*/
+	void			*virtAddr;/* keep virtual address of the data */
+	void			*usrAddr;/* keep virtual address of the
+	user data */
+	dma_addr_t		phys_addr;
+	u32			len; /* len of buffer  */
+	void			*payload; /* pointer to IOCTL Payload */
+	u8			inProgress;/*if 1 - the IOCTL request is in
+	progress */
+	void			*param1;
+	void			*param2;
+	void			*param3;
+};
+
+/******************** function prototype *********************/
+int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out);
+void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha);
+u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag);
+void pm8001_ccb_free(struct pm8001_hba_info *pm8001_ha, u32 ccb_idx);
+void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
+	struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx);
+int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+	void *funcdata);
+int pm8001_slave_alloc(struct scsi_device *scsi_dev);
+int pm8001_slave_configure(struct scsi_device *sdev);
+void pm8001_scan_start(struct Scsi_Host *shost);
+int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time);
+int pm8001_queue_command(struct sas_task *task, const int num,
+	gfp_t gfp_flags);
+int pm8001_abort_task(struct sas_task *task);
+int pm8001_abort_task_set(struct domain_device *dev, u8 *lun);
+int pm8001_clear_aca(struct domain_device *dev, u8 *lun);
+int pm8001_clear_task_set(struct domain_device *dev, u8 *lun);
+int pm8001_dev_found(struct domain_device *dev);
+void pm8001_dev_gone(struct domain_device *dev);
+int pm8001_lu_reset(struct domain_device *dev, u8 *lun);
+int pm8001_I_T_nexus_reset(struct domain_device *dev);
+int pm8001_query_task(struct sas_task *task);
+int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
+	dma_addr_t *pphys_addr, u32 *pphys_addr_hi, u32 *pphys_addr_lo,
+	u32 mem_size, u32 align);
+
+
+/* ctl shared API */
+extern struct device_attribute *pm8001_host_attrs[];
+
+#endif
+