Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (67 commits)
  [SCSI] SUNESP: Complete driver rewrite to version 2.0
  [SPARC64]: Convert PCI over to generic struct iommu/strbuf.
  [SPARC]: device_node name constification fallout
  [SPARC64]: Convert SBUS over to generic iommu/strbuf structs.
  [SPARC64]: Add generic iommu and strbuf structs to iommu.h
  [SPARC64]: Consolidate {sbus,pci}_iommu_arena.
  [SPARC]: Make device_node name and type const
  [SPARC64]: constify some paramaters of OF routines
  [TIGON3]: of_get_property() returns const.
  [SPARC64]: Fix PCI rework to adhere to of_get_property() const return.
  [SPARC64]: Document and fix calculation of pages_avail.
  [SPARC64]: Make sure pbm->prom_node is setup easly enough in psycho.c
  [SPARC64]: Use bootmem_bootmap_pages() in choose_bootmap_pfn().
  [SPARC64]: Add proper header file extern for cmdline_memory_size.
  [SPARC64]: Kill sparc_ultra_dump_{i,d}tlb()
  [SPARC64]: Use DECLARE_BITMAP and BITS_TO_LONGS in mm/init.c
  [SPARC64]: Give move verbose show_mem() output just like i386.
  [SPARC64]: Mark show_mem() printk's with KERN_INFO.
  [SPARC64]: Kill kvaddr_to_phys() and friends.
  [SPARC64]: Privatize sun4u_get_pte() and fix name.
  ...

8 files changed, 3913 insertions, 4802 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 4cd280e8696..fcc4cb6c7f4 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1763,9 +1763,15 @@ config SUN3X_ESP
 	  The ESP was an on-board SCSI controller used on Sun 3/80
 	  machines.  Say Y here to compile in support for it.
 
+config SCSI_ESP_CORE
+	tristate "ESP Scsi Driver Core"
+	depends on SCSI
+	select SCSI_SPI_ATTRS
+
 config SCSI_SUNESP
 	tristate "Sparc ESP Scsi Driver"
 	depends on SBUS && SCSI
+	select SCSI_ESP_CORE
 	help
 	  This is the driver for the Sun ESP SCSI host adapter. The ESP
 	  chipset is present in most SPARC SBUS-based computers.
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 79ecf4ebe6e..70cff4c599d 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -106,7 +106,8 @@ obj-$(CONFIG_MEGARAID_LEGACY)	+= megaraid.o
 obj-$(CONFIG_MEGARAID_NEWGEN)	+= megaraid/
 obj-$(CONFIG_MEGARAID_SAS)	+= megaraid/
 obj-$(CONFIG_SCSI_ACARD)	+= atp870u.o
-obj-$(CONFIG_SCSI_SUNESP)	+= esp.o
+obj-$(CONFIG_SCSI_ESP_CORE)	+= esp_scsi.o
+obj-$(CONFIG_SCSI_SUNESP)	+= sun_esp.o
 obj-$(CONFIG_SCSI_GDTH)		+= gdth.o
 obj-$(CONFIG_SCSI_INITIO)	+= initio.o
 obj-$(CONFIG_SCSI_INIA100)	+= a100u2w.o
diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c
deleted file mode 100644
index 2c2fe80bc42..00000000000
--- a/drivers/scsi/esp.c
+++ /dev/null
@@ -1,4394 +0,0 @@
-/* esp.c: ESP Sun SCSI driver.
- *
- * Copyright (C) 1995, 1998, 2006 David S. Miller (davem@davemloft.net)
- */
-
-/* TODO:
- *
- * 1) Maybe disable parity checking in config register one for SCSI1
- *    targets.  (Gilmore says parity error on the SBus can lock up
- *    old sun4c's)
- * 2) Add support for DMA2 pipelining.
- * 3) Add tagged queueing.
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#include "esp.h"
-
-#include <asm/sbus.h>
-#include <asm/dma.h>
-#include <asm/system.h>
-#include <asm/ptrace.h>
-#include <asm/pgtable.h>
-#include <asm/oplib.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#ifndef __sparc_v9__
-#include <asm/machines.h>
-#include <asm/idprom.h>
-#endif
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_eh.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_tcq.h>
-
-#define DRV_VERSION "1.101"
-
-#define DEBUG_ESP
-/* #define DEBUG_ESP_HME */
-/* #define DEBUG_ESP_DATA */
-/* #define DEBUG_ESP_QUEUE */
-/* #define DEBUG_ESP_DISCONNECT */
-/* #define DEBUG_ESP_STATUS */
-/* #define DEBUG_ESP_PHASES */
-/* #define DEBUG_ESP_WORKBUS */
-/* #define DEBUG_STATE_MACHINE */
-/* #define DEBUG_ESP_CMDS */
-/* #define DEBUG_ESP_IRQS */
-/* #define DEBUG_SDTR */
-/* #define DEBUG_ESP_SG */
-
-/* Use the following to sprinkle debugging messages in a way which
- * suits you if combinations of the above become too verbose when
- * trying to track down a specific problem.
- */
-/* #define DEBUG_ESP_MISC */
-
-#if defined(DEBUG_ESP)
-#define ESPLOG(foo)  printk foo
-#else
-#define ESPLOG(foo)
-#endif /* (DEBUG_ESP) */
-
-#if defined(DEBUG_ESP_HME)
-#define ESPHME(foo)  printk foo
-#else
-#define ESPHME(foo)
-#endif
-
-#if defined(DEBUG_ESP_DATA)
-#define ESPDATA(foo)  printk foo
-#else
-#define ESPDATA(foo)
-#endif
-
-#if defined(DEBUG_ESP_QUEUE)
-#define ESPQUEUE(foo)  printk foo
-#else
-#define ESPQUEUE(foo)
-#endif
-
-#if defined(DEBUG_ESP_DISCONNECT)
-#define ESPDISC(foo)  printk foo
-#else
-#define ESPDISC(foo)
-#endif
-
-#if defined(DEBUG_ESP_STATUS)
-#define ESPSTAT(foo)  printk foo
-#else
-#define ESPSTAT(foo)
-#endif
-
-#if defined(DEBUG_ESP_PHASES)
-#define ESPPHASE(foo)  printk foo
-#else
-#define ESPPHASE(foo)
-#endif
-
-#if defined(DEBUG_ESP_WORKBUS)
-#define ESPBUS(foo)  printk foo
-#else
-#define ESPBUS(foo)
-#endif
-
-#if defined(DEBUG_ESP_IRQS)
-#define ESPIRQ(foo)  printk foo
-#else
-#define ESPIRQ(foo)
-#endif
-
-#if defined(DEBUG_SDTR)
-#define ESPSDTR(foo)  printk foo
-#else
-#define ESPSDTR(foo)
-#endif
-
-#if defined(DEBUG_ESP_MISC)
-#define ESPMISC(foo)  printk foo
-#else
-#define ESPMISC(foo)
-#endif
-
-/* Command phase enumeration. */
-enum {
-	not_issued    = 0x00,  /* Still in the issue_SC queue.          */
-
-	/* Various forms of selecting a target. */
-#define in_slct_mask    0x10
-	in_slct_norm  = 0x10,  /* ESP is arbitrating, normal selection  */
-	in_slct_stop  = 0x11,  /* ESP will select, then stop with IRQ   */
-	in_slct_msg   = 0x12,  /* select, then send a message           */
-	in_slct_tag   = 0x13,  /* select and send tagged queue msg      */
-	in_slct_sneg  = 0x14,  /* select and acquire sync capabilities  */
-
-	/* Any post selection activity. */
-#define in_phases_mask  0x20
-	in_datain     = 0x20,  /* Data is transferring from the bus     */
-	in_dataout    = 0x21,  /* Data is transferring to the bus       */
-	in_data_done  = 0x22,  /* Last DMA data operation done (maybe)  */
-	in_msgin      = 0x23,  /* Eating message from target            */
-	in_msgincont  = 0x24,  /* Eating more msg bytes from target     */
-	in_msgindone  = 0x25,  /* Decide what to do with what we got    */
-	in_msgout     = 0x26,  /* Sending message to target             */
-	in_msgoutdone = 0x27,  /* Done sending msg out                  */
-	in_cmdbegin   = 0x28,  /* Sending cmd after abnormal selection  */
-	in_cmdend     = 0x29,  /* Done sending slow cmd                 */
-	in_status     = 0x2a,  /* Was in status phase, finishing cmd    */
-	in_freeing    = 0x2b,  /* freeing the bus for cmd cmplt or disc */
-	in_the_dark   = 0x2c,  /* Don't know what bus phase we are in   */
-
-	/* Special states, ie. not normal bus transitions... */
-#define in_spec_mask    0x80
-	in_abortone   = 0x80,  /* Aborting one command currently        */
-	in_abortall   = 0x81,  /* Blowing away all commands we have     */
-	in_resetdev   = 0x82,  /* SCSI target reset in progress         */
-	in_resetbus   = 0x83,  /* SCSI bus reset in progress            */
-	in_tgterror   = 0x84,  /* Target did something stupid           */
-};
-
-enum {
-	/* Zero has special meaning, see skipahead[12]. */
-/*0*/	do_never,
-
-/*1*/	do_phase_determine,
-/*2*/	do_reset_bus,
-/*3*/	do_reset_complete,
-/*4*/	do_work_bus,
-/*5*/	do_intr_end
-};
-
-/* Forward declarations. */
-static irqreturn_t esp_intr(int irq, void *dev_id);
-
-/* Debugging routines */
-struct esp_cmdstrings {
-	u8 cmdchar;
-	char *text;
-} esp_cmd_strings[] = {
-	/* Miscellaneous */
-	{ ESP_CMD_NULL, "ESP_NOP", },
-	{ ESP_CMD_FLUSH, "FIFO_FLUSH", },
-	{ ESP_CMD_RC, "RSTESP", },
-	{ ESP_CMD_RS, "RSTSCSI", },
-	/* Disconnected State Group */
-	{ ESP_CMD_RSEL, "RESLCTSEQ", },
-	{ ESP_CMD_SEL, "SLCTNATN", },
-	{ ESP_CMD_SELA, "SLCTATN", },
-	{ ESP_CMD_SELAS, "SLCTATNSTOP", },
-	{ ESP_CMD_ESEL, "ENSLCTRESEL", },
-	{ ESP_CMD_DSEL, "DISSELRESEL", },
-	{ ESP_CMD_SA3, "SLCTATN3", },
-	{ ESP_CMD_RSEL3, "RESLCTSEQ", },
-	/* Target State Group */
-	{ ESP_CMD_SMSG, "SNDMSG", },
-	{ ESP_CMD_SSTAT, "SNDSTATUS", },
-	{ ESP_CMD_SDATA, "SNDDATA", },
-	{ ESP_CMD_DSEQ, "DISCSEQ", },
-	{ ESP_CMD_TSEQ, "TERMSEQ", },
-	{ ESP_CMD_TCCSEQ, "TRGTCMDCOMPSEQ", },
-	{ ESP_CMD_DCNCT, "DISC", },
-	{ ESP_CMD_RMSG, "RCVMSG", },
-	{ ESP_CMD_RCMD, "RCVCMD", },
-	{ ESP_CMD_RDATA, "RCVDATA", },
-	{ ESP_CMD_RCSEQ, "RCVCMDSEQ", },
-	/* Initiator State Group */
-	{ ESP_CMD_TI, "TRANSINFO", },
-	{ ESP_CMD_ICCSEQ, "INICMDSEQCOMP", },
-	{ ESP_CMD_MOK, "MSGACCEPTED", },
-	{ ESP_CMD_TPAD, "TPAD", },
-	{ ESP_CMD_SATN, "SATN", },
-	{ ESP_CMD_RATN, "RATN", },
-};
-#define NUM_ESP_COMMANDS  ((sizeof(esp_cmd_strings)) / (sizeof(struct esp_cmdstrings)))
-
-/* Print textual representation of an ESP command */
-static inline void esp_print_cmd(u8 espcmd)
-{
-	u8 dma_bit = espcmd & ESP_CMD_DMA;
-	int i;
-
-	espcmd &= ~dma_bit;
-	for (i = 0; i < NUM_ESP_COMMANDS; i++)
-		if (esp_cmd_strings[i].cmdchar == espcmd)
-			break;
-	if (i == NUM_ESP_COMMANDS)
-		printk("ESP_Unknown");
-	else
-		printk("%s%s", esp_cmd_strings[i].text,
-		       ((dma_bit) ? "+DMA" : ""));
-}
-
-/* Print the status register's value */
-static inline void esp_print_statreg(u8 statreg)
-{
-	u8 phase;
-
-	printk("STATUS<");
-	phase = statreg & ESP_STAT_PMASK;
-	printk("%s,", (phase == ESP_DOP ? "DATA-OUT" :
-		       (phase == ESP_DIP ? "DATA-IN" :
-			(phase == ESP_CMDP ? "COMMAND" :
-			 (phase == ESP_STATP ? "STATUS" :
-			  (phase == ESP_MOP ? "MSG-OUT" :
-			   (phase == ESP_MIP ? "MSG_IN" :
-			    "unknown")))))));
-	if (statreg & ESP_STAT_TDONE)
-		printk("TRANS_DONE,");
-	if (statreg & ESP_STAT_TCNT)
-		printk("TCOUNT_ZERO,");
-	if (statreg & ESP_STAT_PERR)
-		printk("P_ERROR,");
-	if (statreg & ESP_STAT_SPAM)
-		printk("SPAM,");
-	if (statreg & ESP_STAT_INTR)
-		printk("IRQ,");
-	printk(">");
-}
-
-/* Print the interrupt register's value */
-static inline void esp_print_ireg(u8 intreg)
-{
-	printk("INTREG< ");
-	if (intreg & ESP_INTR_S)
-		printk("SLCT_NATN ");
-	if (intreg & ESP_INTR_SATN)
-		printk("SLCT_ATN ");
-	if (intreg & ESP_INTR_RSEL)
-		printk("RSLCT ");
-	if (intreg & ESP_INTR_FDONE)
-		printk("FDONE ");
-	if (intreg & ESP_INTR_BSERV)
-		printk("BSERV ");
-	if (intreg & ESP_INTR_DC)
-		printk("DISCNCT ");
-	if (intreg & ESP_INTR_IC)
-		printk("ILL_CMD ");
-	if (intreg & ESP_INTR_SR)
-		printk("SCSI_BUS_RESET ");
-	printk(">");
-}
-
-/* Print the sequence step registers contents */
-static inline void esp_print_seqreg(u8 stepreg)
-{
-	stepreg &= ESP_STEP_VBITS;
-	printk("STEP<%s>",
-	       (stepreg == ESP_STEP_ASEL ? "SLCT_ARB_CMPLT" :
-		(stepreg == ESP_STEP_SID ? "1BYTE_MSG_SENT" :
-		 (stepreg == ESP_STEP_NCMD ? "NOT_IN_CMD_PHASE" :
-		  (stepreg == ESP_STEP_PPC ? "CMD_BYTES_LOST" :
-		   (stepreg == ESP_STEP_FINI4 ? "CMD_SENT_OK" :
-		    "UNKNOWN"))))));
-}
-
-static char *phase_string(int phase)
-{
-	switch (phase) {
-	case not_issued:
-		return "UNISSUED";
-	case in_slct_norm:
-		return "SLCTNORM";
-	case in_slct_stop:
-		return "SLCTSTOP";
-	case in_slct_msg:
-		return "SLCTMSG";
-	case in_slct_tag:
-		return "SLCTTAG";
-	case in_slct_sneg:
-		return "SLCTSNEG";
-	case in_datain:
-		return "DATAIN";
-	case in_dataout:
-		return "DATAOUT";
-	case in_data_done:
-		return "DATADONE";
-	case in_msgin:
-		return "MSGIN";
-	case in_msgincont:
-		return "MSGINCONT";
-	case in_msgindone:
-		return "MSGINDONE";
-	case in_msgout:
-		return "MSGOUT";
-	case in_msgoutdone:
-		return "MSGOUTDONE";
-	case in_cmdbegin:
-		return "CMDBEGIN";
-	case in_cmdend:
-		return "CMDEND";
-	case in_status:
-		return "STATUS";
-	case in_freeing:
-		return "FREEING";
-	case in_the_dark:
-		return "CLUELESS";
-	case in_abortone:
-		return "ABORTONE";
-	case in_abortall:
-		return "ABORTALL";
-	case in_resetdev:
-		return "RESETDEV";
-	case in_resetbus:
-		return "RESETBUS";
-	case in_tgterror:
-		return "TGTERROR";
-	default:
-		return "UNKNOWN";
-	};
-}
-
-#ifdef DEBUG_STATE_MACHINE
-static inline void esp_advance_phase(struct scsi_cmnd *s, int newphase)
-{
-	ESPLOG(("<%s>", phase_string(newphase)));
-	s->SCp.sent_command = s->SCp.phase;
-	s->SCp.phase = newphase;
-}
-#else
-#define esp_advance_phase(__s, __newphase) \
-	(__s)->SCp.sent_command = (__s)->SCp.phase; \
-	(__s)->SCp.phase = (__newphase);
-#endif
-
-#ifdef DEBUG_ESP_CMDS
-static inline void esp_cmd(struct esp *esp, u8 cmd)
-{
-	esp->espcmdlog[esp->espcmdent] = cmd;
-	esp->espcmdent = (esp->espcmdent + 1) & 31;
-	sbus_writeb(cmd, esp->eregs + ESP_CMD);
-}
-#else
-#define esp_cmd(__esp, __cmd)	\
-	sbus_writeb((__cmd), ((__esp)->eregs) + ESP_CMD)
-#endif
-
-#define ESP_INTSOFF(__dregs)	\
-	sbus_writel(sbus_readl((__dregs)+DMA_CSR)&~(DMA_INT_ENAB), (__dregs)+DMA_CSR)
-#define ESP_INTSON(__dregs)	\
-	sbus_writel(sbus_readl((__dregs)+DMA_CSR)|DMA_INT_ENAB, (__dregs)+DMA_CSR)
-#define ESP_IRQ_P(__dregs)	\
-	(sbus_readl((__dregs)+DMA_CSR) & (DMA_HNDL_INTR|DMA_HNDL_ERROR))
-
-/* How we use the various Linux SCSI data structures for operation.
- *
- * struct scsi_cmnd:
- *
- *   We keep track of the synchronous capabilities of a target
- *   in the device member, using sync_min_period and
- *   sync_max_offset.  These are the values we directly write
- *   into the ESP registers while running a command.  If offset
- *   is zero the ESP will use asynchronous transfers.
- *   If the borken flag is set we assume we shouldn't even bother
- *   trying to negotiate for synchronous transfer as this target
- *   is really stupid.  If we notice the target is dropping the
- *   bus, and we have been allowing it to disconnect, we clear
- *   the disconnect flag.
- */
-
-
-/* Manipulation of the ESP command queues.  Thanks to the aha152x driver
- * and its author, Juergen E. Fischer, for the methods used here.
- * Note that these are per-ESP queues, not global queues like
- * the aha152x driver uses.
- */
-static inline void append_SC(struct scsi_cmnd **SC, struct scsi_cmnd *new_SC)
-{
-	struct scsi_cmnd *end;
-
-	new_SC->host_scribble = (unsigned char *) NULL;
-	if (!*SC)
-		*SC = new_SC;
-	else {
-		for (end=*SC;end->host_scribble;end=(struct scsi_cmnd *)end->host_scribble)
-			;
-		end->host_scribble = (unsigned char *) new_SC;
-	}
-}
-
-static inline void prepend_SC(struct scsi_cmnd **SC, struct scsi_cmnd *new_SC)
-{
-	new_SC->host_scribble = (unsigned char *) *SC;
-	*SC = new_SC;
-}
-
-static inline struct scsi_cmnd *remove_first_SC(struct scsi_cmnd **SC)
-{
-	struct scsi_cmnd *ptr;
-	ptr = *SC;
-	if (ptr)
-		*SC = (struct scsi_cmnd *) (*SC)->host_scribble;
-	return ptr;
-}
-
-static inline struct scsi_cmnd *remove_SC(struct scsi_cmnd **SC, int target, int lun)
-{
-	struct scsi_cmnd *ptr, *prev;
-
-	for (ptr = *SC, prev = NULL;
-	     ptr && ((ptr->device->id != target) || (ptr->device->lun != lun));
-	     prev = ptr, ptr = (struct scsi_cmnd *) ptr->host_scribble)
-		;
-	if (ptr) {
-		if (prev)
-			prev->host_scribble=ptr->host_scribble;
-		else
-			*SC=(struct scsi_cmnd *)ptr->host_scribble;
-	}
-	return ptr;
-}
-
-/* Resetting various pieces of the ESP scsi driver chipset/buses. */
-static void esp_reset_dma(struct esp *esp)
-{
-	int can_do_burst16, can_do_burst32, can_do_burst64;
-	int can_do_sbus64;
-	u32 tmp;
-
-	can_do_burst16 = (esp->bursts & DMA_BURST16) != 0;
-	can_do_burst32 = (esp->bursts & DMA_BURST32) != 0;
-	can_do_burst64 = 0;
-	can_do_sbus64 = 0;
-	if (sbus_can_dma_64bit(esp->sdev))
-		can_do_sbus64 = 1;
-	if (sbus_can_burst64(esp->sdev))
-		can_do_burst64 = (esp->bursts & DMA_BURST64) != 0;
-
-	/* Punt the DVMA into a known state. */
-	if (esp->dma->revision != dvmahme) {
-		tmp = sbus_readl(esp->dregs + DMA_CSR);
-		sbus_writel(tmp | DMA_RST_SCSI, esp->dregs + DMA_CSR);
-		sbus_writel(tmp & ~DMA_RST_SCSI, esp->dregs + DMA_CSR);
-	}
-	switch (esp->dma->revision) {
-	case dvmahme:
-		/* This is the HME DVMA gate array. */
-
-		sbus_writel(DMA_RESET_FAS366, esp->dregs + DMA_CSR);
-		sbus_writel(DMA_RST_SCSI, esp->dregs + DMA_CSR);
-
-		esp->prev_hme_dmacsr = (DMA_PARITY_OFF|DMA_2CLKS|DMA_SCSI_DISAB|DMA_INT_ENAB);
-		esp->prev_hme_dmacsr &= ~(DMA_ENABLE|DMA_ST_WRITE|DMA_BRST_SZ);
-
-		if (can_do_burst64)
-			esp->prev_hme_dmacsr |= DMA_BRST64;
-		else if (can_do_burst32)
-			esp->prev_hme_dmacsr |= DMA_BRST32;
-
-		if (can_do_sbus64) {
-			esp->prev_hme_dmacsr |= DMA_SCSI_SBUS64;
-			sbus_set_sbus64(esp->sdev, esp->bursts);
-		}
-
-		/* This chip is horrible. */
-		while (sbus_readl(esp->dregs + DMA_CSR) & DMA_PEND_READ)
-			udelay(1);
-
-		sbus_writel(0, esp->dregs + DMA_CSR);
-		sbus_writel(esp->prev_hme_dmacsr, esp->dregs + DMA_CSR);
-
-		/* This is necessary to avoid having the SCSI channel
-		 * engine lock up on us.
-		 */
-		sbus_writel(0, esp->dregs + DMA_ADDR);
-
-		break;
-	case dvmarev2:
-		/* This is the gate array found in the sun4m
-		 * NCR SBUS I/O subsystem.
-		 */
-		if (esp->erev != esp100) {
-			tmp = sbus_readl(esp->dregs + DMA_CSR);
-			sbus_writel(tmp | DMA_3CLKS, esp->dregs + DMA_CSR);
-		}
-		break;
-	case dvmarev3:
-		tmp = sbus_readl(esp->dregs + DMA_CSR);
-		tmp &= ~DMA_3CLKS;
-		tmp |= DMA_2CLKS;
-		if (can_do_burst32) {
-			tmp &= ~DMA_BRST_SZ;
-			tmp |= DMA_BRST32;
-		}
-		sbus_writel(tmp, esp->dregs + DMA_CSR);
-		break;
-	case dvmaesc1:
-		/* This is the DMA unit found on SCSI/Ether cards. */
-		tmp = sbus_readl(esp->dregs + DMA_CSR);
-		tmp |= DMA_ADD_ENABLE;
-		tmp &= ~DMA_BCNT_ENAB;
-		if (!can_do_burst32 && can_do_burst16) {
-			tmp |= DMA_ESC_BURST;
-		} else {
-			tmp &= ~(DMA_ESC_BURST);
-		}
-		sbus_writel(tmp, esp->dregs + DMA_CSR);
-		break;
-	default:
-		break;
-	};
-	ESP_INTSON(esp->dregs);
-}
-
-/* Reset the ESP chip, _not_ the SCSI bus. */
-static void __init esp_reset_esp(struct esp *esp)
-{
-	u8 family_code, version;
-	int i;
-
-	/* Now reset the ESP chip */
-	esp_cmd(esp, ESP_CMD_RC);
-	esp_cmd(esp, ESP_CMD_NULL | ESP_CMD_DMA);
-	esp_cmd(esp, ESP_CMD_NULL | ESP_CMD_DMA);
-
-	/* Reload the configuration registers */
-	sbus_writeb(esp->cfact, esp->eregs + ESP_CFACT);
-	esp->prev_stp = 0;
-	sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP);
-	esp->prev_soff = 0;
-	sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF);
-	sbus_writeb(esp->neg_defp, esp->eregs + ESP_TIMEO);
-
-	/* This is the only point at which it is reliable to read
-	 * the ID-code for a fast ESP chip variants.
-	 */
-	esp->max_period = ((35 * esp->ccycle) / 1000);
-	if (esp->erev == fast) {
-		version = sbus_readb(esp->eregs + ESP_UID);
-		family_code = (version & 0xf8) >> 3;
-		if (family_code == 0x02)
-			esp->erev = fas236;
-		else if (family_code == 0x0a)
-			esp->erev = fashme; /* Version is usually '5'. */
-		else
-			esp->erev = fas100a;
-		ESPMISC(("esp%d: FAST chip is %s (family=%d, version=%d)\n",
-			 esp->esp_id,
-			 (esp->erev == fas236) ? "fas236" :
-			 ((esp->erev == fas100a) ? "fas100a" :
-			  "fasHME"), family_code, (version & 7)));
-
-		esp->min_period = ((4 * esp->ccycle) / 1000);
-	} else {
-		esp->min_period = ((5 * esp->ccycle) / 1000);
-	}
-	esp->max_period = (esp->max_period + 3)>>2;
-	esp->min_period = (esp->min_period + 3)>>2;
-
-	sbus_writeb(esp->config1, esp->eregs + ESP_CFG1);
-	switch (esp->erev) {
-	case esp100:
-		/* nothing to do */
-		break;
-	case esp100a:
-		sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
-		break;
-	case esp236:
-		/* Slow 236 */
-		sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
-		esp->prev_cfg3 = esp->config3[0];
-		sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
-		break;
-	case fashme:
-		esp->config2 |= (ESP_CONFIG2_HME32 | ESP_CONFIG2_HMEFENAB);
-		/* fallthrough... */
-	case fas236:
-		/* Fast 236 or HME */
-		sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
-		for (i = 0; i < 16; i++) {
-			if (esp->erev == fashme) {
-				u8 cfg3;
-
-				cfg3 = ESP_CONFIG3_FCLOCK | ESP_CONFIG3_OBPUSH;
-				if (esp->scsi_id >= 8)
-					cfg3 |= ESP_CONFIG3_IDBIT3;
-				esp->config3[i] |= cfg3;
-			} else {
-				esp->config3[i] |= ESP_CONFIG3_FCLK;
-			}
-		}
-		esp->prev_cfg3 = esp->config3[0];
-		sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
-		if (esp->erev == fashme) {
-			esp->radelay = 80;
-		} else {
-			if (esp->diff)
-				esp->radelay = 0;
-			else
-				esp->radelay = 96;
-		}
-		break;
-	case fas100a:
-		/* Fast 100a */
-		sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
-		for (i = 0; i < 16; i++)
-			esp->config3[i] |= ESP_CONFIG3_FCLOCK;
-		esp->prev_cfg3 = esp->config3[0];
-		sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
-		esp->radelay = 32;
-		break;
-	default:
-		panic("esp: what could it be... I wonder...");
-		break;
-	};
-
-	/* Eat any bitrot in the chip */
-	sbus_readb(esp->eregs + ESP_INTRPT);
-	udelay(100);
-}
-
-/* This places the ESP into a known state at boot time. */
-static void __init esp_bootup_reset(struct esp *esp)
-{
-	u8 tmp;
-
-	/* Reset the DMA */
-	esp_reset_dma(esp);
-
-	/* Reset the ESP */
-	esp_reset_esp(esp);
-
-	/* Reset the SCSI bus, but tell ESP not to generate an irq */
-	tmp = sbus_readb(esp->eregs + ESP_CFG1);
-	tmp |= ESP_CONFIG1_SRRDISAB;
-	sbus_writeb(tmp, esp->eregs + ESP_CFG1);
-
-	esp_cmd(esp, ESP_CMD_RS);
-	udelay(400);
-
-	sbus_writeb(esp->config1, esp->eregs + ESP_CFG1);
-
-	/* Eat any bitrot in the chip and we are done... */
-	sbus_readb(esp->eregs + ESP_INTRPT);
-}
-
-static int __init esp_find_dvma(struct esp *esp, struct sbus_dev *dma_sdev)
-{
-	struct sbus_dev *sdev = esp->sdev;
-	struct sbus_dma *dma;
-
-	if (dma_sdev != NULL) {
-		for_each_dvma(dma) {
-			if (dma->sdev == dma_sdev)
-				break;
-		}
-	} else {
-		for_each_dvma(dma) {
-			/* If allocated already, can't use it. */
-			if (dma->allocated)
-				continue;
-
-			if (dma->sdev == NULL)
-				break;
-
-			/* If bus + slot are the same and it has the
-			 * correct OBP name, it's ours.
-			 */
-			if (sdev->bus == dma->sdev->bus &&
-			    sdev->slot == dma->sdev->slot &&
-			    (!strcmp(dma->sdev->prom_name, "dma") ||
-			     !strcmp(dma->sdev->prom_name, "espdma")))
-				break;
-		}
-	}
-
-	/* If we don't know how to handle the dvma,
-	 * do not use this device.
-	 */
-	if (dma == NULL) {
-		printk("Cannot find dvma for ESP%d's SCSI\n", esp->esp_id);
-		return -1;
-	}
-	if (dma->allocated) {
-		printk("esp%d: can't use my espdma\n", esp->esp_id);
-		return -1;
-	}
-	dma->allocated = 1;
-	esp->dma = dma;
-	esp->dregs = dma->regs;
-
-	return 0;
-}
-
-static int __init esp_map_regs(struct esp *esp, int hme)
-{
-	struct sbus_dev *sdev = esp->sdev;
-	struct resource *res;
-
-	/* On HME, two reg sets exist, first is DVMA,
-	 * second is ESP registers.
-	 */
-	if (hme)
-		res = &sdev->resource[1];
-	else
-		res = &sdev->resource[0];
-
-	esp->eregs = sbus_ioremap(res, 0, ESP_REG_SIZE, "ESP Registers");
-
-	if (esp->eregs == 0)
-		return -1;
-	return 0;
-}
-
-static int __init esp_map_cmdarea(struct esp *esp)
-{
-	struct sbus_dev *sdev = esp->sdev;
-
-	esp->esp_command = sbus_alloc_consistent(sdev, 16,
-						 &esp->esp_command_dvma);
-	if (esp->esp_command == NULL ||
-	    esp->esp_command_dvma == 0)
-		return -1;
-	return 0;
-}
-
-static int __init esp_register_irq(struct esp *esp)
-{
-	esp->ehost->irq = esp->irq = esp->sdev->irqs[0];
-
-	/* We used to try various overly-clever things to
-	 * reduce the interrupt processing overhead on
-	 * sun4c/sun4m when multiple ESP's shared the
-	 * same IRQ.  It was too complex and messy to
-	 * sanely maintain.
-	 */
-	if (request_irq(esp->ehost->irq, esp_intr,
-			IRQF_SHARED, "ESP SCSI", esp)) {
-		printk("esp%d: Cannot acquire irq line\n",
-		       esp->esp_id);
-		return -1;
-	}
-
-	printk("esp%d: IRQ %d ", esp->esp_id,
-	       esp->ehost->irq);
-
-	return 0;
-}
-
-static void __init esp_get_scsi_id(struct esp *esp)
-{
-	struct sbus_dev *sdev = esp->sdev;
-	struct device_node *dp = sdev->ofdev.node;
-
-	esp->scsi_id = of_getintprop_default(dp,
-					     "initiator-id",
-					     -1);
-	if (esp->scsi_id == -1)
-		esp->scsi_id = of_getintprop_default(dp,
-						     "scsi-initiator-id",
-						     -1);
-	if (esp->scsi_id == -1)
-		esp->scsi_id = (sdev->bus == NULL) ? 7 :
-			of_getintprop_default(sdev->bus->ofdev.node,
-					      "scsi-initiator-id",
-					      7);
-	esp->ehost->this_id = esp->scsi_id;
-	esp->scsi_id_mask = (1 << esp->scsi_id);
-
-}
-
-static void __init esp_get_clock_params(struct esp *esp)
-{
-	struct sbus_dev *sdev = esp->sdev;
-	int prom_node = esp->prom_node;
-	int sbus_prom_node;
-	unsigned int fmhz;
-	u8 ccf;
-
-	if (sdev != NULL && sdev->bus != NULL)
-		sbus_prom_node = sdev->bus->prom_node;
-	else
-		sbus_prom_node = 0;
-
-	/* This is getting messy but it has to be done
-	 * correctly or else you get weird behavior all
-	 * over the place.  We are trying to basically
-	 * figure out three pieces of information.
-	 *
-	 * a) Clock Conversion Factor
-	 *
-	 *    This is a representation of the input
-	 *    crystal clock frequency going into the
-	 *    ESP on this machine.  Any operation whose
-	 *    timing is longer than 400ns depends on this
-	 *    value being correct.  For example, you'll
-	 *    get blips for arbitration/selection during
-	 *    high load or with multiple targets if this
-	 *    is not set correctly.
-	 *
-	 * b) Selection Time-Out
-	 *
-	 *    The ESP isn't very bright and will arbitrate
-	 *    for the bus and try to select a target
-	 *    forever if you let it.  This value tells
-	 *    the ESP when it has taken too long to
-	 *    negotiate and that it should interrupt
-	 *    the CPU so we can see what happened.
-	 *    The value is computed as follows (from
-	 *    NCR/Symbios chip docs).
-	 *
-	 *          (Time Out Period) *  (Input Clock)
-	 *    STO = ----------------------------------
-	 *          (8192) * (Clock Conversion Factor)
-	 *
-	 *    You usually want the time out period to be
-	 *    around 250ms, I think we'll set it a little
-	 *    bit higher to account for fully loaded SCSI
-	 *    bus's and slow devices that don't respond so
-	 *    quickly to selection attempts. (yeah, I know
-	 *    this is out of spec. but there is a lot of
-	 *    buggy pieces of firmware out there so bite me)
-	 *
-	 * c) Imperical constants for synchronous offset
-	 *    and transfer period register values
-	 *
-	 *    This entails the smallest and largest sync
-	 *    period we could ever handle on this ESP.
-	 */
-
-	fmhz = prom_getintdefault(prom_node, "clock-frequency", -1);
-	if (fmhz == -1)
-		fmhz = (!sbus_prom_node) ? 0 :
-			prom_getintdefault(sbus_prom_node, "clock-frequency", -1);
-
-	if (fmhz <= (5000000))
-		ccf = 0;
-	else
-		ccf = (((5000000 - 1) + (fmhz))/(5000000));
-
-	if (!ccf || ccf > 8) {
-		/* If we can't find anything reasonable,
-		 * just assume 20MHZ.  This is the clock
-		 * frequency of the older sun4c's where I've
-		 * been unable to find the clock-frequency
-		 * PROM property.  All other machines provide
-		 * useful values it seems.
-		 */
-		ccf = ESP_CCF_F4;
-		fmhz = (20000000);
-	}
-
-	if (ccf == (ESP_CCF_F7 + 1))
-		esp->cfact = ESP_CCF_F0;
-	else if (ccf == ESP_CCF_NEVER)
-		esp->cfact = ESP_CCF_F2;
-	else
-		esp->cfact = ccf;
-	esp->raw_cfact = ccf;
-
-	esp->cfreq = fmhz;
-	esp->ccycle = ESP_MHZ_TO_CYCLE(fmhz);
-	esp->ctick = ESP_TICK(ccf, esp->ccycle);
-	esp->neg_defp = ESP_NEG_DEFP(fmhz, ccf);
-	esp->sync_defp = SYNC_DEFP_SLOW;
-
-	printk("SCSI ID %d Clk %dMHz CCYC=%d CCF=%d TOut %d ",
-	       esp->scsi_id, (fmhz / 1000000),
-	       (int)esp->ccycle, (int)ccf, (int) esp->neg_defp);
-}
-
-static void __init esp_get_bursts(struct esp *esp, struct sbus_dev *dma)
-{
-	struct sbus_dev *sdev = esp->sdev;
-	u8 bursts;
-
-	bursts = prom_getintdefault(esp->prom_node, "burst-sizes", 0xff);
-
-	if (dma) {
-		u8 tmp = prom_getintdefault(dma->prom_node,
-					    "burst-sizes", 0xff);
-		if (tmp != 0xff)
-			bursts &= tmp;
-	}
-
-	if (sdev->bus) {
-		u8 tmp = prom_getintdefault(sdev->bus->prom_node,
-					    "burst-sizes", 0xff);
-		if (tmp != 0xff)
-			bursts &= tmp;
-	}
-
-	if (bursts == 0xff ||
-	    (bursts & DMA_BURST16) == 0 ||
-	    (bursts & DMA_BURST32) == 0)
-		bursts = (DMA_BURST32 - 1);
-
-	esp->bursts = bursts;
-}
-
-static void __init esp_get_revision(struct esp *esp)
-{
-	u8 tmp;
-
-	esp->config1 = (ESP_CONFIG1_PENABLE | (esp->scsi_id & 7));
-	esp->config2 = (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY);
-	sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
-
-	tmp = sbus_readb(esp->eregs + ESP_CFG2);
-	tmp &= ~ESP_CONFIG2_MAGIC;
-	if (tmp != (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY)) {
-		/* If what we write to cfg2 does not come back, cfg2
-		 * is not implemented, therefore this must be a plain
-		 * esp100.
-		 */
-		esp->erev = esp100;
-		printk("NCR53C90(esp100)\n");
-	} else {
-		esp->config2 = 0;
-		esp->prev_cfg3 = esp->config3[0] = 5;
-		sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
-		sbus_writeb(0, esp->eregs + ESP_CFG3);
-		sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
-
-		tmp = sbus_readb(esp->eregs + ESP_CFG3);
-		if (tmp != 5) {
-			/* The cfg2 register is implemented, however
-			 * cfg3 is not, must be esp100a.
-			 */
-			esp->erev = esp100a;
-			printk("NCR53C90A(esp100a)\n");
-		} else {
-			int target;
-
-			for (target = 0; target < 16; target++)
-				esp->config3[target] = 0;
-			esp->prev_cfg3 = 0;
-			sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
-
-			/* All of cfg{1,2,3} implemented, must be one of
-			 * the fas variants, figure out which one.
-			 */
-			if (esp->raw_cfact > ESP_CCF_F5) {
-				esp->erev = fast;
-				esp->sync_defp = SYNC_DEFP_FAST;
-				printk("NCR53C9XF(espfast)\n");
-			} else {
-				esp->erev = esp236;
-				printk("NCR53C9x(esp236)\n");
-			}
-			esp->config2 = 0;
-			sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
-		}
-	}
-}
-
-static void __init esp_init_swstate(struct esp *esp)
-{
-	int i;
-
-	/* Command queues... */
-	esp->current_SC = NULL;
-	esp->disconnected_SC = NULL;
-	esp->issue_SC = NULL;
-
-	/* Target and current command state... */
-	esp->targets_present = 0;
-	esp->resetting_bus = 0;
-	esp->snip = 0;
-
-	init_waitqueue_head(&esp->reset_queue);
-
-	/* Debugging... */
-	for(i = 0; i < 32; i++)
-		esp->espcmdlog[i] = 0;
-	esp->espcmdent = 0;
-
-	/* MSG phase state... */
-	for(i = 0; i < 16; i++) {
-		esp->cur_msgout[i] = 0;
-		esp->cur_msgin[i] = 0;
-	}
-	esp->prevmsgout = esp->prevmsgin = 0;
-	esp->msgout_len = esp->msgin_len = 0;
-
-	/* Clear the one behind caches to hold unmatchable values. */
-	esp->prev_soff = esp->prev_stp = esp->prev_cfg3 = 0xff;
-	esp->prev_hme_dmacsr = 0xffffffff;
-}
-
-static int __init detect_one_esp(struct scsi_host_template *tpnt,
-				 struct device *dev,
-				 struct sbus_dev *esp_dev,
-				 struct sbus_dev *espdma,
-				 struct sbus_bus *sbus,
-				 int hme)
-{
-	static int instance;
-	struct Scsi_Host *esp_host = scsi_host_alloc(tpnt, sizeof(struct esp));
-	struct esp *esp;
-	
-	if (!esp_host)
-		return -ENOMEM;
-
-	if (hme)
-		esp_host->max_id = 16;
-	esp = (struct esp *) esp_host->hostdata;
-	esp->ehost = esp_host;
-	esp->sdev = esp_dev;
-	esp->esp_id = instance;
-	esp->prom_node = esp_dev->prom_node;
-	prom_getstring(esp->prom_node, "name", esp->prom_name,
-		       sizeof(esp->prom_name));
-
-	if (esp_find_dvma(esp, espdma) < 0)
-		goto fail_unlink;
-	if (esp_map_regs(esp, hme) < 0) {
-		printk("ESP registers unmappable");
-		goto fail_dvma_release;
-	}
-	if (esp_map_cmdarea(esp) < 0) {
-		printk("ESP DVMA transport area unmappable");
-		goto fail_unmap_regs;
-	}
-	if (esp_register_irq(esp) < 0)
-		goto fail_unmap_cmdarea;
-
-	esp_get_scsi_id(esp);
-
-	esp->diff = prom_getbool(esp->prom_node, "differential");
-	if (esp->diff)
-		printk("Differential ");
-
-	esp_get_clock_params(esp);
-	esp_get_bursts(esp, espdma);
-	esp_get_revision(esp);
-	esp_init_swstate(esp);
-
-	esp_bootup_reset(esp);
-
-	if (scsi_add_host(esp_host, dev))
-		goto fail_free_irq;
-
-	dev_set_drvdata(&esp_dev->ofdev.dev, esp);
-
-	scsi_scan_host(esp_host);
-	instance++;
-
-	return 0;
-
-fail_free_irq:
-	free_irq(esp->ehost->irq, esp);
-
-fail_unmap_cmdarea:
-	sbus_free_consistent(esp->sdev, 16,
-			     (void *) esp->esp_command,
-			     esp->esp_command_dvma);
-
-fail_unmap_regs:
-	sbus_iounmap(esp->eregs, ESP_REG_SIZE);
-
-fail_dvma_release:
-	esp->dma->allocated = 0;
-
-fail_unlink:
-	scsi_host_put(esp_host);
-	return -1;
-}
-
-/* Detecting ESP chips on the machine.  This is the simple and easy
- * version.
- */
-static int __devexit esp_remove_common(struct esp *esp)
-{
-	unsigned int irq = esp->ehost->irq;
-
-	scsi_remove_host(esp->ehost);
-
-	ESP_INTSOFF(esp->dregs);
-#if 0
-	esp_reset_dma(esp);
-	esp_reset_esp(esp);
-#endif
-
-	free_irq(irq, esp);
-	sbus_free_consistent(esp->sdev, 16,
-			     (void *) esp->esp_command, esp->esp_command_dvma);
-	sbus_iounmap(esp->eregs, ESP_REG_SIZE);
-	esp->dma->allocated = 0;
-
-	scsi_host_put(esp->ehost);
-
-	return 0;
-}
-
-
-#ifdef CONFIG_SUN4
-
-#include <asm/sun4paddr.h>
-
-static struct sbus_dev sun4_esp_dev;
-
-static int __init esp_sun4_probe(struct scsi_host_template *tpnt)
-{
-	if (sun4_esp_physaddr) {
-		memset(&sun4_esp_dev, 0, sizeof(sun4_esp_dev));
-		sun4_esp_dev.reg_addrs[0].phys_addr = sun4_esp_physaddr;
-		sun4_esp_dev.irqs[0] = 4;
-		sun4_esp_dev.resource[0].start = sun4_esp_physaddr;
-		sun4_esp_dev.resource[0].end =
-			sun4_esp_physaddr + ESP_REG_SIZE - 1;
-		sun4_esp_dev.resource[0].flags = IORESOURCE_IO;
-
-		return detect_one_esp(tpnt, NULL,
-				      &sun4_esp_dev, NULL, NULL, 0);
-	}
-	return 0;
-}
-
-static int __devexit esp_sun4_remove(void)
-{
-	struct of_device *dev = &sun4_esp_dev.ofdev;
-	struct esp *esp = dev_get_drvdata(&dev->dev);
-
-	return esp_remove_common(esp);
-}
-
-#else /* !CONFIG_SUN4 */
-
-static int __devinit esp_sbus_probe(struct of_device *dev, const struct of_device_id *match)
-{
-	struct sbus_dev *sdev = to_sbus_device(&dev->dev);
-	struct device_node *dp = dev->node;
-	struct sbus_dev *dma_sdev = NULL;
-	int hme = 0;
-
-	if (dp->parent &&
-	    (!strcmp(dp->parent->name, "espdma") ||
-	     !strcmp(dp->parent->name, "dma")))
-		dma_sdev = sdev->parent;
-	else if (!strcmp(dp->name, "SUNW,fas")) {
-		dma_sdev = sdev;
-		hme = 1;
-	}
-
-	return detect_one_esp(match->data, &dev->dev,
-			      sdev, dma_sdev, sdev->bus, hme);
-}
-
-static int __devexit esp_sbus_remove(struct of_device *dev)
-{
-	struct esp *esp = dev_get_drvdata(&dev->dev);
-
-	return esp_remove_common(esp);
-}
-
-#endif /* !CONFIG_SUN4 */
-
-/* The info function will return whatever useful
- * information the developer sees fit.  If not provided, then
- * the name field will be used instead.
- */
-static const char *esp_info(struct Scsi_Host *host)
-{
-	struct esp *esp;
-
-	esp = (struct esp *) host->hostdata;
-	switch (esp->erev) {
-	case esp100:
-		return "Sparc ESP100 (NCR53C90)";
-	case esp100a:
-		return "Sparc ESP100A (NCR53C90A)";
-	case esp236:
-		return "Sparc ESP236";
-	case fas236:
-		return "Sparc ESP236-FAST";
-	case fashme:
-		return "Sparc ESP366-HME";
-	case fas100a:
-		return "Sparc ESP100A-FAST";
-	default:
-		return "Bogon ESP revision";
-	};
-}
-
-/* From Wolfgang Stanglmeier's NCR scsi driver. */
-struct info_str
-{
-	char *buffer;
-	int length;
-	int offset;
-	int pos;
-};
-
-static void copy_mem_info(struct info_str *info, char *data, int len)
-{
-	if (info->pos + len > info->length)
-		len = info->length - info->pos;
-
-	if (info->pos + len < info->offset) {
-		info->pos += len;
-		return;
-	}
-	if (info->pos < info->offset) {
-		data += (info->offset - info->pos);
-		len  -= (info->offset - info->pos);
-	}
-
-	if (len > 0) {
-		memcpy(info->buffer + info->pos, data, len);
-		info->pos += len;
-	}
-}
-
-static int copy_info(struct info_str *info, char *fmt, ...)
-{
-	va_list args;
-	char buf[81];
-	int len;
-
-	va_start(args, fmt);
-	len = vsprintf(buf, fmt, args);
-	va_end(args);
-
-	copy_mem_info(info, buf, len);
-	return len;
-}
-
-static int esp_host_info(struct esp *esp, char *ptr, off_t offset, int len)
-{
-	struct scsi_device *sdev;
-	struct info_str info;
-	int i;
-
-	info.buffer	= ptr;
-	info.length	= len;
-	info.offset	= offset;
-	info.pos	= 0;
-
-	copy_info(&info, "Sparc ESP Host Adapter:\n");
-	copy_info(&info, "\tPROM node\t\t%08x\n", (unsigned int) esp->prom_node);
-	copy_info(&info, "\tPROM name\t\t%s\n", esp->prom_name);
-	copy_info(&info, "\tESP Model\t\t");
-	switch (esp->erev) {
-	case esp100:
-		copy_info(&info, "ESP100\n");
-		break;
-	case esp100a:
-		copy_info(&info, "ESP100A\n");
-		break;
-	case esp236:
-		copy_info(&info, "ESP236\n");
-		break;
-	case fas236:
-		copy_info(&info, "FAS236\n");
-		break;
-	case fas100a:
-		copy_info(&info, "FAS100A\n");
-		break;
-	case fast:
-		copy_info(&info, "FAST\n");
-		break;
-	case fashme:
-		copy_info(&info, "Happy Meal FAS\n");
-		break;
-	case espunknown:
-	default:
-		copy_info(&info, "Unknown!\n");
-		break;
-	};
-	copy_info(&info, "\tDMA Revision\t\t");
-	switch (esp->dma->revision) {
-	case dvmarev0:
-		copy_info(&info, "Rev 0\n");
-		break;
-	case dvmaesc1:
-		copy_info(&info, "ESC Rev 1\n");
-		break;
-	case dvmarev1:
-		copy_info(&info, "Rev 1\n");
-		break;
-	case dvmarev2:
-		copy_info(&info, "Rev 2\n");
-		break;
-	case dvmarev3:
-		copy_info(&info, "Rev 3\n");
-		break;
-	case dvmarevplus:
-		copy_info(&info, "Rev 1+\n");
-		break;
-	case dvmahme:
-		copy_info(&info, "Rev HME/FAS\n");
-		break;
-	default:
-		copy_info(&info, "Unknown!\n");
-		break;
-	};
-	copy_info(&info, "\tLive Targets\t\t[ ");
-	for (i = 0; i < 15; i++) {
-		if (esp->targets_present & (1 << i))
-			copy_info(&info, "%d ", i);
-	}
-	copy_info(&info, "]\n\n");
-	
-	/* Now describe the state of each existing target. */
-	copy_info(&info, "Target #\tconfig3\t\tSync Capabilities\tDisconnect\tWide\n");
-
-	shost_for_each_device(sdev, esp->ehost) {
-		struct esp_device *esp_dev = sdev->hostdata;
-		uint id = sdev->id;
-
-		if (!(esp->targets_present & (1 << id)))
-			continue;
-
-		copy_info(&info, "%d\t\t", id);
-		copy_info(&info, "%08lx\t", esp->config3[id]);
-		copy_info(&info, "[%02lx,%02lx]\t\t\t",
-			esp_dev->sync_max_offset,
-			esp_dev->sync_min_period);
-		copy_info(&info, "%s\t\t",
-			esp_dev->disconnect ? "yes" : "no");
-		copy_info(&info, "%s\n",
-			(esp->config3[id] & ESP_CONFIG3_EWIDE) ? "yes" : "no");
-	}
-	return info.pos > info.offset? info.pos - info.offset : 0;
-}
-
-/* ESP proc filesystem code. */
-static int esp_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
-			 int length, int inout)
-{
-	struct esp *esp = (struct esp *) host->hostdata;
-
-	if (inout)
-		return -EINVAL; /* not yet */
-
-	if (start)
-		*start = buffer;
-
-	return esp_host_info(esp, buffer, offset, length);
-}
-
-static void esp_get_dmabufs(struct esp *esp, struct scsi_cmnd *sp)
-{
-	if (sp->use_sg == 0) {
-		sp->SCp.this_residual = sp->request_bufflen;
-		sp->SCp.buffer = (struct scatterlist *) sp->request_buffer;
-		sp->SCp.buffers_residual = 0;
-		if (sp->request_bufflen) {
-			sp->SCp.have_data_in = sbus_map_single(esp->sdev, sp->SCp.buffer,
-							       sp->SCp.this_residual,
-							       sp->sc_data_direction);
-			sp->SCp.ptr = (char *) ((unsigned long)sp->SCp.have_data_in);
-		} else {
-			sp->SCp.ptr = NULL;
-		}
-	} else {
-		sp->SCp.buffer = (struct scatterlist *) sp->request_buffer;
-		sp->SCp.buffers_residual = sbus_map_sg(esp->sdev,
-						       sp->SCp.buffer,
-						       sp->use_sg,
-						       sp->sc_data_direction);
-		sp->SCp.this_residual = sg_dma_len(sp->SCp.buffer);
-		sp->SCp.ptr = (char *) ((unsigned long)sg_dma_address(sp->SCp.buffer));
-	}
-}
-
-static void esp_release_dmabufs(struct esp *esp, struct scsi_cmnd *sp)
-{
-	if (sp->use_sg) {
-		sbus_unmap_sg(esp->sdev, sp->request_buffer, sp->use_sg,
-			      sp->sc_data_direction);
-	} else if (sp->request_bufflen) {
-		sbus_unmap_single(esp->sdev,
-				  sp->SCp.have_data_in,
-				  sp->request_bufflen,
-				  sp->sc_data_direction);
-	}
-}
-
-static void esp_restore_pointers(struct esp *esp, struct scsi_cmnd *sp)
-{
-	struct esp_pointers *ep = &esp->data_pointers[sp->device->id];
-
-	sp->SCp.ptr = ep->saved_ptr;
-	sp->SCp.buffer = ep->saved_buffer;
-	sp->SCp.this_residual = ep->saved_this_residual;
-	sp->SCp.buffers_residual = ep->saved_buffers_residual;
-}
-
-static void esp_save_pointers(struct esp *esp, struct scsi_cmnd *sp)
-{
-	struct esp_pointers *ep = &esp->data_pointers[sp->device->id];
-
-	ep->saved_ptr = sp->SCp.ptr;
-	ep->saved_buffer = sp->SCp.buffer;
-	ep->saved_this_residual = sp->SCp.this_residual;
-	ep->saved_buffers_residual = sp->SCp.buffers_residual;
-}
-
-/* Some rules:
- *
- *   1) Never ever panic while something is live on the bus.
- *      If there is to be any chance of syncing the disks this
- *      rule is to be obeyed.
- *
- *   2) Any target that causes a foul condition will no longer
- *      have synchronous transfers done to it, no questions
- *      asked.
- *
- *   3) Keep register accesses to a minimum.  Think about some
- *      day when we have Xbus machines this is running on and
- *      the ESP chip is on the other end of the machine on a
- *      different board from the cpu where this is running.
- */
-
-/* Fire off a command.  We assume the bus is free and that the only
- * case where we could see an interrupt is where we have disconnected
- * commands active and they are trying to reselect us.
- */
-static inline void esp_check_cmd(struct esp *esp, struct scsi_cmnd *sp)
-{
-	switch (sp->cmd_len) {
-	case 6:
-	case 10:
-	case 12:
-		esp->esp_slowcmd = 0;
-		break;
-
-	default:
-		esp->esp_slowcmd = 1;
-		esp->esp_scmdleft = sp->cmd_len;
-		esp->esp_scmdp = &sp->cmnd[0];
-		break;
-	};
-}
-
-static inline void build_sync_nego_msg(struct esp *esp, int period, int offset)
-{
-	esp->cur_msgout[0] = EXTENDED_MESSAGE;
-	esp->cur_msgout[1] = 3;
-	esp->cur_msgout[2] = EXTENDED_SDTR;
-	esp->cur_msgout[3] = period;
-	esp->cur_msgout[4] = offset;
-	esp->msgout_len = 5;
-}
-
-/* SIZE is in bits, currently HME only supports 16 bit wide transfers. */
-static inline void build_wide_nego_msg(struct esp *esp, int size)
-{
-	esp->cur_msgout[0] = EXTENDED_MESSAGE;
-	esp->cur_msgout[1] = 2;
-	esp->cur_msgout[2] = EXTENDED_WDTR;
-	switch (size) {
-	case 32:
-		esp->cur_msgout[3] = 2;
-		break;
-	case 16:
-		esp->cur_msgout[3] = 1;
-		break;
-	case 8:
-	default:
-		esp->cur_msgout[3] = 0;
-		break;
-	};
-
-	esp->msgout_len = 4;
-}
-
-static void esp_exec_cmd(struct esp *esp)
-{
-	struct scsi_cmnd *SCptr;
-	struct scsi_device *SDptr;
-	struct esp_device *esp_dev;
-	volatile u8 *cmdp = esp->esp_command;
-	u8 the_esp_command;
-	int lun, target;
-	int i;
-
-	/* Hold off if we have disconnected commands and
-	 * an IRQ is showing...
-	 */
-	if (esp->disconnected_SC && ESP_IRQ_P(esp->dregs))
-		return;
-
-	/* Grab first member of the issue queue. */
-	SCptr = esp->current_SC = remove_first_SC(&esp->issue_SC);
-
-	/* Safe to panic here because current_SC is null. */
-	if (!SCptr)
-		panic("esp: esp_exec_cmd and issue queue is NULL");
-
-	SDptr = SCptr->device;
-	esp_dev = SDptr->hostdata;
-	lun = SCptr->device->lun;
-	target = SCptr->device->id;
-
-	esp->snip = 0;
-	esp->msgout_len = 0;
-
-	/* Send it out whole, or piece by piece?   The ESP
-	 * only knows how to automatically send out 6, 10,
-	 * and 12 byte commands.  I used to think that the
-	 * Linux SCSI code would never throw anything other
-	 * than that to us, but then again there is the
-	 * SCSI generic driver which can send us anything.
-	 */
-	esp_check_cmd(esp, SCptr);
-
-	/* If arbitration/selection is successful, the ESP will leave
-	 * ATN asserted, causing the target to go into message out
-	 * phase.  The ESP will feed the target the identify and then
-	 * the target can only legally go to one of command,
-	 * datain/out, status, or message in phase, or stay in message
-	 * out phase (should we be trying to send a sync negotiation
-	 * message after the identify).  It is not allowed to drop
-	 * BSY, but some buggy targets do and we check for this
-	 * condition in the selection complete code.  Most of the time
-	 * we'll make the command bytes available to the ESP and it
-	 * will not interrupt us until it finishes command phase, we
-	 * cannot do this for command sizes the ESP does not
-	 * understand and in this case we'll get interrupted right
-	 * when the target goes into command phase.
-	 *
-	 * It is absolutely _illegal_ in the presence of SCSI-2 devices
-	 * to use the ESP select w/o ATN command.  When SCSI-2 devices are
-	 * present on the bus we _must_ always go straight to message out
-	 * phase with an identify message for the target.  Being that
-	 * selection attempts in SCSI-1 w/o ATN was an option, doing SCSI-2
-	 * selections should not confuse SCSI-1 we hope.
-	 */
-
-	if (esp_dev->sync) {
-		/* this targets sync is known */
-#ifndef __sparc_v9__
-do_sync_known:
-#endif
-		if (esp_dev->disconnect)
-			*cmdp++ = IDENTIFY(1, lun);
-		else
-			*cmdp++ = IDENTIFY(0, lun);
-
-		if (esp->esp_slowcmd) {
-			the_esp_command = (ESP_CMD_SELAS | ESP_CMD_DMA);
-			esp_advance_phase(SCptr, in_slct_stop);
-		} else {
-			the_esp_command = (ESP_CMD_SELA | ESP_CMD_DMA);
-			esp_advance_phase(SCptr, in_slct_norm);
-		}
-	} else if (!(esp->targets_present & (1<<target)) || !(esp_dev->disconnect)) {
-		/* After the bootup SCSI code sends both the
-		 * TEST_UNIT_READY and INQUIRY commands we want
-		 * to at least attempt allowing the device to
-		 * disconnect.
-		 */
-		ESPMISC(("esp: Selecting device for first time. target=%d "
-			 "lun=%d\n", target, SCptr->device->lun));
-		if (!SDptr->borken && !esp_dev->disconnect)
-			esp_dev->disconnect = 1;
-
-		*cmdp++ = IDENTIFY(0, lun);
-		esp->prevmsgout = NOP;
-		esp_advance_phase(SCptr, in_slct_norm);
-		the_esp_command = (ESP_CMD_SELA | ESP_CMD_DMA);
-
-		/* Take no chances... */
-		esp_dev->sync_max_offset = 0;
-		esp_dev->sync_min_period = 0;
-	} else {
-		/* Sorry, I have had way too many problems with
-		 * various CDROM devices on ESP. -DaveM
-		 */
-		int cdrom_hwbug_wkaround = 0;
-
-#ifndef __sparc_v9__
-		/* Never allow disconnects or synchronous transfers on
-		 * SparcStation1 and SparcStation1+.  Allowing those
-		 * to be enabled seems to lockup the machine completely.
-		 */
-		if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS1)) ||
-		    (idprom->id_machtype == (SM_SUN4C | SM_4C_SS1PLUS))) {
-			/* But we are nice and allow tapes and removable
-			 * disks (but not CDROMs) to disconnect.
-			 */
-			if(SDptr->type == TYPE_TAPE ||
-			   (SDptr->type != TYPE_ROM && SDptr->removable))
-				esp_dev->disconnect = 1;
-			else
-				esp_dev->disconnect = 0;
-			esp_dev->sync_max_offset = 0;
-			esp_dev->sync_min_period = 0;
-			esp_dev->sync = 1;
-			esp->snip = 0;
-			goto do_sync_known;
-		}
-#endif /* !(__sparc_v9__) */
-
-		/* We've talked to this guy before,
-		 * but never negotiated.  Let's try,
-		 * need to attempt WIDE first, before
-		 * sync nego, as per SCSI 2 standard.
-		 */
-		if (esp->erev == fashme && !esp_dev->wide) {
-			if (!SDptr->borken &&
-			   SDptr->type != TYPE_ROM &&
-			   SDptr->removable == 0) {
-				build_wide_nego_msg(esp, 16);
-				esp_dev->wide = 1;
-				esp->wnip = 1;
-				goto after_nego_msg_built;
-			} else {
-				esp_dev->wide = 1;
-				/* Fall through and try sync. */
-			}
-		}
-
-		if (!SDptr->borken) {
-			if ((SDptr->type == TYPE_ROM)) {
-				/* Nice try sucker... */
-				ESPMISC(("esp%d: Disabling sync for buggy "
-					 "CDROM.\n", esp->esp_id));
-				cdrom_hwbug_wkaround = 1;
-				build_sync_nego_msg(esp, 0, 0);
-			} else if (SDptr->removable != 0) {
-				ESPMISC(("esp%d: Not negotiating sync/wide but "
-					 "allowing disconnect for removable media.\n",
-					 esp->esp_id));
-				build_sync_nego_msg(esp, 0, 0);
-			} else {
-				build_sync_nego_msg(esp, esp->sync_defp, 15);
-			}
-		} else {
-			build_sync_nego_msg(esp, 0, 0);
-		}
-		esp_dev->sync = 1;
-		esp->snip = 1;
-
-after_nego_msg_built:
-		/* A fix for broken SCSI1 targets, when they disconnect
-		 * they lock up the bus and confuse ESP.  So disallow
-		 * disconnects for SCSI1 targets for now until we
-		 * find a better fix.
-		 *
-		 * Addendum: This is funny, I figured out what was going
-		 *           on.  The blotzed SCSI1 target would disconnect,
-		 *           one of the other SCSI2 targets or both would be
-		 *           disconnected as well.  The SCSI1 target would
-		 *           stay disconnected long enough that we start
-		 *           up a command on one of the SCSI2 targets.  As
-		 *           the ESP is arbitrating for the bus the SCSI1
-		 *           target begins to arbitrate as well to reselect
-		 *           the ESP.  The SCSI1 target refuses to drop it's
-		 *           ID bit on the data bus even though the ESP is
-		 *           at ID 7 and is the obvious winner for any
-		 *           arbitration.  The ESP is a poor sport and refuses
-		 *           to lose arbitration, it will continue indefinitely
-		 *           trying to arbitrate for the bus and can only be
-		 *           stopped via a chip reset or SCSI bus reset.
-		 *           Therefore _no_ disconnects for SCSI1 targets
-		 *           thank you very much. ;-)
-		 */
-		if(((SDptr->scsi_level < 3) &&
-		    (SDptr->type != TYPE_TAPE) &&
-		    SDptr->removable == 0) ||
-		    cdrom_hwbug_wkaround || SDptr->borken) {
-			ESPMISC((KERN_INFO "esp%d: Disabling DISCONNECT for target %d "
-				 "lun %d\n", esp->esp_id, SCptr->device->id, SCptr->device->lun));
-			esp_dev->disconnect = 0;
-			*cmdp++ = IDENTIFY(0, lun);
-		} else {
-			*cmdp++ = IDENTIFY(1, lun);
-		}
-
-		/* ESP fifo is only so big...
-		 * Make this look like a slow command.
-		 */
-		esp->esp_slowcmd = 1;
-		esp->esp_scmdleft = SCptr->cmd_len;
-		esp->esp_scmdp = &SCptr->cmnd[0];
-
-		the_esp_command = (ESP_CMD_SELAS | ESP_CMD_DMA);
-		esp_advance_phase(SCptr, in_slct_msg);
-	}
-
-	if (!esp->esp_slowcmd)
-		for (i = 0; i < SCptr->cmd_len; i++)
-			*cmdp++ = SCptr->cmnd[i];
-
-	/* HME sucks... */
-	if (esp->erev == fashme)
-		sbus_writeb((target & 0xf) | (ESP_BUSID_RESELID | ESP_BUSID_CTR32BIT),
-			    esp->eregs + ESP_BUSID);
-	else
-		sbus_writeb(target & 7, esp->eregs + ESP_BUSID);
-	if (esp->prev_soff != esp_dev->sync_max_offset ||
-	    esp->prev_stp  != esp_dev->sync_min_period ||
-	    (esp->erev > esp100a &&
-	     esp->prev_cfg3 != esp->config3[target])) {
-		esp->prev_soff = esp_dev->sync_max_offset;
-		esp->prev_stp = esp_dev->sync_min_period;
-		sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF);
-		sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP);
-		if (esp->erev > esp100a) {
-			esp->prev_cfg3 = esp->config3[target];
-			sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
-		}
-	}
-	i = (cmdp - esp->esp_command);
-
-	if (esp->erev == fashme) {
-		esp_cmd(esp, ESP_CMD_FLUSH); /* Grrr! */
-
-		/* Set up the DMA and HME counters */
-		sbus_writeb(i, esp->eregs + ESP_TCLOW);
-		sbus_writeb(0, esp->eregs + ESP_TCMED);
-		sbus_writeb(0, esp->eregs + FAS_RLO);
-		sbus_writeb(0, esp->eregs + FAS_RHI);
-		esp_cmd(esp, the_esp_command);
-
-		/* Talk about touchy hardware... */
-		esp->prev_hme_dmacsr = ((esp->prev_hme_dmacsr |
-					 (DMA_SCSI_DISAB | DMA_ENABLE)) &
-					~(DMA_ST_WRITE));
-		sbus_writel(16, esp->dregs + DMA_COUNT);
-		sbus_writel(esp->esp_command_dvma, esp->dregs + DMA_ADDR);
-		sbus_writel(esp->prev_hme_dmacsr, esp->dregs + DMA_CSR);
-	} else {
-		u32 tmp;
-
-		/* Set up the DMA and ESP counters */
-		sbus_writeb(i, esp->eregs + ESP_TCLOW);
-		sbus_writeb(0, esp->eregs + ESP_TCMED);
-		tmp = sbus_readl(esp->dregs + DMA_CSR);
-		tmp &= ~DMA_ST_WRITE;
-		tmp |= DMA_ENABLE;
-		sbus_writel(tmp, esp->dregs + DMA_CSR);
-		if (esp->dma->revision == dvmaesc1) {
-			if (i) /* Workaround ESC gate array SBUS rerun bug. */
-				sbus_writel(PAGE_SIZE, esp->dregs + DMA_COUNT);
-		}
-		sbus_writel(esp->esp_command_dvma, esp->dregs + DMA_ADDR);
-
-		/* Tell ESP to "go". */
-		esp_cmd(esp, the_esp_command);
-	}
-}
-
-/* Queue a SCSI command delivered from the mid-level Linux SCSI code. */
-static int esp_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
-{
-	struct esp *esp;
-
-	/* Set up func ptr and initial driver cmd-phase. */
-	SCpnt->scsi_done = done;
-	SCpnt->SCp.phase = not_issued;
-
-	/* We use the scratch area. */
-	ESPQUEUE(("esp_queue: target=%d lun=%d ", SCpnt->device->id, SCpnt->device->lun));
-	ESPDISC(("N<%02x,%02x>", SCpnt->device->id, SCpnt->device->lun));
-
-	esp = (struct esp *) SCpnt->device->host->hostdata;
-	esp_get_dmabufs(esp, SCpnt);
-	esp_save_pointers(esp, SCpnt); /* FIXME for tag queueing */
-
-	SCpnt->SCp.Status           = CHECK_CONDITION;
-	SCpnt->SCp.Message          = 0xff;
-	SCpnt->SCp.sent_command     = 0;
-
-	/* Place into our queue. */
-	if (SCpnt->cmnd[0] == REQUEST_SENSE) {
-		ESPQUEUE(("RQSENSE\n"));
-		prepend_SC(&esp->issue_SC, SCpnt);
-	} else {
-		ESPQUEUE(("\n"));
-		append_SC(&esp->issue_SC, SCpnt);
-	}
-
-	/* Run it now if we can. */
-	if (!esp->current_SC && !esp->resetting_bus)
-		esp_exec_cmd(esp);
-
-	return 0;
-}
-
-/* Dump driver state. */
-static void esp_dump_cmd(struct scsi_cmnd *SCptr)
-{
-	ESPLOG(("[tgt<%02x> lun<%02x> "
-		"pphase<%s> cphase<%s>]",
-		SCptr->device->id, SCptr->device->lun,
-		phase_string(SCptr->SCp.sent_command),
-		phase_string(SCptr->SCp.phase)));
-}
-
-static void esp_dump_state(struct esp *esp)
-{
-	struct scsi_cmnd *SCptr = esp->current_SC;
-#ifdef DEBUG_ESP_CMDS
-	int i;
-#endif
-
-	ESPLOG(("esp%d: dumping state\n", esp->esp_id));
-	ESPLOG(("esp%d: dma -- cond_reg<%08x> addr<%08x>\n",
-		esp->esp_id,
-		sbus_readl(esp->dregs + DMA_CSR),
-		sbus_readl(esp->dregs + DMA_ADDR)));
-	ESPLOG(("esp%d: SW [sreg<%02x> sstep<%02x> ireg<%02x>]\n",
-		esp->esp_id, esp->sreg, esp->seqreg, esp->ireg));
-	ESPLOG(("esp%d: HW reread [sreg<%02x> sstep<%02x> ireg<%02x>]\n",
-		esp->esp_id,
-		sbus_readb(esp->eregs + ESP_STATUS),
-		sbus_readb(esp->eregs + ESP_SSTEP),
-		sbus_readb(esp->eregs + ESP_INTRPT)));
-#ifdef DEBUG_ESP_CMDS
-	printk("esp%d: last ESP cmds [", esp->esp_id);
-	i = (esp->espcmdent - 1) & 31;
-	printk("<"); esp_print_cmd(esp->espcmdlog[i]); printk(">");
-	i = (i - 1) & 31;
-	printk("<"); esp_print_cmd(esp->espcmdlog[i]); printk(">");
-	i = (i - 1) & 31;
-	printk("<"); esp_print_cmd(esp->espcmdlog[i]); printk(">");
-	i = (i - 1) & 31;
-	printk("<"); esp_print_cmd(esp->espcmdlog[i]); printk(">");
-	printk("]\n");
-#endif /* (DEBUG_ESP_CMDS) */
-
-	if (SCptr) {
-		ESPLOG(("esp%d: current command ", esp->esp_id));
-		esp_dump_cmd(SCptr);
-	}
-	ESPLOG(("\n"));
-	SCptr = esp->disconnected_SC;
-	ESPLOG(("esp%d: disconnected ", esp->esp_id));
-	while (SCptr) {
-		esp_dump_cmd(SCptr);
-		SCptr = (struct scsi_cmnd *) SCptr->host_scribble;
-	}
-	ESPLOG(("\n"));
-}
-
-/* Abort a command.  The host_lock is acquired by caller. */
-static int esp_abort(struct scsi_cmnd *SCptr)
-{
-	struct esp *esp = (struct esp *) SCptr->device->host->hostdata;
-	int don;
-
-	ESPLOG(("esp%d: Aborting command\n", esp->esp_id));
-	esp_dump_state(esp);
-
-	/* Wheee, if this is the current command on the bus, the
-	 * best we can do is assert ATN and wait for msgout phase.
-	 * This should even fix a hung SCSI bus when we lose state
-	 * in the driver and timeout because the eventual phase change
-	 * will cause the ESP to (eventually) give an interrupt.
-	 */
-	if (esp->current_SC == SCptr) {
-		esp->cur_msgout[0] = ABORT;
-		esp->msgout_len = 1;
-		esp->msgout_ctr = 0;
-		esp_cmd(esp, ESP_CMD_SATN);
-		return SUCCESS;
-	}
-
-	/* If it is still in the issue queue then we can safely
-	 * call the completion routine and report abort success.
-	 */
-	don = (sbus_readl(esp->dregs + DMA_CSR) & DMA_INT_ENAB);
-	if (don) {
-		ESP_INTSOFF(esp->dregs);
-	}
-	if (esp->issue_SC) {
-		struct scsi_cmnd **prev, *this;
-		for (prev = (&esp->issue_SC), this = esp->issue_SC;
-		     this != NULL;
-		     prev = (struct scsi_cmnd **) &(this->host_scribble),
-			     this = (struct scsi_cmnd *) this->host_scribble) {
-
-			if (this == SCptr) {
-				*prev = (struct scsi_cmnd *) this->host_scribble;
-				this->host_scribble = NULL;
-
-				esp_release_dmabufs(esp, this);
-				this->result = DID_ABORT << 16;
-				this->scsi_done(this);
-
-				if (don)
-					ESP_INTSON(esp->dregs);
-
-				return SUCCESS;
-			}
-		}
-	}
-
-	/* Yuck, the command to abort is disconnected, it is not
-	 * worth trying to abort it now if something else is live
-	 * on the bus at this time.  So, we let the SCSI code wait
-	 * a little bit and try again later.
-	 */
-	if (esp->current_SC) {
-		if (don)
-			ESP_INTSON(esp->dregs);
-		return FAILED;
-	}
-
-	/* It's disconnected, we have to reconnect to re-establish
-	 * the nexus and tell the device to abort.  However, we really
-	 * cannot 'reconnect' per se.  Don't try to be fancy, just
-	 * indicate failure, which causes our caller to reset the whole
-	 * bus.
-	 */
-
-	if (don)
-		ESP_INTSON(esp->dregs);
-
-	return FAILED;
-}
-
-/* We've sent ESP_CMD_RS to the ESP, the interrupt had just
- * arrived indicating the end of the SCSI bus reset.  Our job
- * is to clean out the command queues and begin re-execution
- * of SCSI commands once more.
- */
-static int esp_finish_reset(struct esp *esp)
-{
-	struct scsi_cmnd *sp = esp->current_SC;
-
-	/* Clean up currently executing command, if any. */
-	if (sp != NULL) {
-		esp->current_SC = NULL;
-
-		esp_release_dmabufs(esp, sp);
-		sp->result = (DID_RESET << 16);
-
-		sp->scsi_done(sp);
-	}
-
-	/* Clean up disconnected queue, they have been invalidated
-	 * by the bus reset.
-	 */
-	if (esp->disconnected_SC) {
-		while ((sp = remove_first_SC(&esp->disconnected_SC)) != NULL) {
-			esp_release_dmabufs(esp, sp);
-			sp->result = (DID_RESET << 16);
-
-			sp->scsi_done(sp);
-		}
-	}
-
-	/* SCSI bus reset is complete. */
-	esp->resetting_bus = 0;
-	wake_up(&esp->reset_queue);
-
-	/* Ok, now it is safe to get commands going once more. */
-	if (esp->issue_SC)
-		esp_exec_cmd(esp);
-
-	return do_intr_end;
-}
-
-static int esp_do_resetbus(struct esp *esp)
-{
-	ESPLOG(("esp%d: Resetting scsi bus\n", esp->esp_id));
-	esp->resetting_bus = 1;
-	esp_cmd(esp, ESP_CMD_RS);
-
-	return do_intr_end;
-}
-
-/* Reset ESP chip, reset hanging bus, then kill active and
- * disconnected commands for targets without soft reset.
- *
- * The host_lock is acquired by caller.
- */
-static int esp_reset(struct scsi_cmnd *SCptr)
-{
-	struct esp *esp = (struct esp *) SCptr->device->host->hostdata;
-
-	spin_lock_irq(esp->ehost->host_lock);
-	(void) esp_do_resetbus(esp);
-	spin_unlock_irq(esp->ehost->host_lock);
-
-	wait_event(esp->reset_queue, (esp->resetting_bus == 0));
-
-	return SUCCESS;
-}
-
-/* Internal ESP done function. */
-static void esp_done(struct esp *esp, int error)
-{
-	struct scsi_cmnd *done_SC = esp->current_SC;
-
-	esp->current_SC = NULL;
-
-	esp_release_dmabufs(esp, done_SC);
-	done_SC->result = error;
-
-	done_SC->scsi_done(done_SC);
-
-	/* Bus is free, issue any commands in the queue. */
-	if (esp->issue_SC && !esp->current_SC)
-		esp_exec_cmd(esp);
-
-}
-
-/* Wheee, ESP interrupt engine. */  
-
-/* Forward declarations. */
-static int esp_do_phase_determine(struct esp *esp);
-static int esp_do_data_finale(struct esp *esp);
-static int esp_select_complete(struct esp *esp);
-static int esp_do_status(struct esp *esp);
-static int esp_do_msgin(struct esp *esp);
-static int esp_do_msgindone(struct esp *esp);
-static int esp_do_msgout(struct esp *esp);
-static int esp_do_cmdbegin(struct esp *esp);
-
-#define sreg_datainp(__sreg)  (((__sreg) & ESP_STAT_PMASK) == ESP_DIP)
-#define sreg_dataoutp(__sreg) (((__sreg) & ESP_STAT_PMASK) == ESP_DOP)
-
-/* Read any bytes found in the FAS366 fifo, storing them into
- * the ESP driver software state structure.
- */
-static void hme_fifo_read(struct esp *esp)
-{
-	u8 count = 0;
-	u8 status = esp->sreg;
-
-	/* Cannot safely frob the fifo for these following cases, but
-	 * we must always read the fifo when the reselect interrupt
-	 * is pending.
-	 */
-	if (((esp->ireg & ESP_INTR_RSEL) == 0)	&&
-	    (sreg_datainp(status)		||
-	     sreg_dataoutp(status)		||
-	     (esp->current_SC &&
-	      esp->current_SC->SCp.phase == in_data_done))) {
-		ESPHME(("<wkaround_skipped>"));
-	} else {
-		unsigned long fcnt = sbus_readb(esp->eregs + ESP_FFLAGS) & ESP_FF_FBYTES;
-
-		/* The HME stores bytes in multiples of 2 in the fifo. */
-		ESPHME(("hme_fifo[fcnt=%d", (int)fcnt));
-		while (fcnt) {
-			esp->hme_fifo_workaround_buffer[count++] =
-				sbus_readb(esp->eregs + ESP_FDATA);
-			esp->hme_fifo_workaround_buffer[count++] =
-				sbus_readb(esp->eregs + ESP_FDATA);
-			ESPHME(("<%02x,%02x>", esp->hme_fifo_workaround_buffer[count-2], esp->hme_fifo_workaround_buffer[count-1]));
-			fcnt--;
-		}
-		if (sbus_readb(esp->eregs + ESP_STATUS2) & ESP_STAT2_F1BYTE) {
-			ESPHME(("<poke_byte>"));
-			sbus_writeb(0, esp->eregs + ESP_FDATA);
-			esp->hme_fifo_workaround_buffer[count++] =
-				sbus_readb(esp->eregs + ESP_FDATA);
-			ESPHME(("<%02x,0x00>", esp->hme_fifo_workaround_buffer[count-1]));
-			ESPHME(("CMD_FLUSH"));
-			esp_cmd(esp, ESP_CMD_FLUSH);
-		} else {
-			ESPHME(("no_xtra_byte"));
-		}
-	}
-	ESPHME(("wkarnd_cnt=%d]", (int)count));
-	esp->hme_fifo_workaround_count = count;
-}
-
-static inline void hme_fifo_push(struct esp *esp, u8 *bytes, u8 count)
-{
-	esp_cmd(esp, ESP_CMD_FLUSH);
-	while (count) {
-		u8 tmp = *bytes++;
-		sbus_writeb(tmp, esp->eregs + ESP_FDATA);
-		sbus_writeb(0, esp->eregs + ESP_FDATA);
-		count--;
-	}
-}
-
-/* We try to avoid some interrupts by jumping ahead and see if the ESP
- * has gotten far enough yet.  Hence the following.
- */
-static inline int skipahead1(struct esp *esp, struct scsi_cmnd *scp,
-			     int prev_phase, int new_phase)
-{
-	if (scp->SCp.sent_command != prev_phase)
-		return 0;
-	if (ESP_IRQ_P(esp->dregs)) {
-		/* Yes, we are able to save an interrupt. */
-		if (esp->erev == fashme)
-			esp->sreg2 = sbus_readb(esp->eregs + ESP_STATUS2);
-		esp->sreg = (sbus_readb(esp->eregs + ESP_STATUS) & ~(ESP_STAT_INTR));
-		esp->ireg = sbus_readb(esp->eregs + ESP_INTRPT);
-		if (esp->erev == fashme) {
-			/* This chip is really losing. */
-			ESPHME(("HME["));
-			/* Must latch fifo before reading the interrupt
-			 * register else garbage ends up in the FIFO
-			 * which confuses the driver utterly.
-			 * Happy Meal indeed....
-			 */
-			ESPHME(("fifo_workaround]"));
-			if (!(esp->sreg2 & ESP_STAT2_FEMPTY) ||
-			    (esp->sreg2 & ESP_STAT2_F1BYTE))
-				hme_fifo_read(esp);
-		}
-		if (!(esp->ireg & ESP_INTR_SR))
-			return 0;
-		else
-			return do_reset_complete;
-	}
-	/* Ho hum, target is taking forever... */
-	scp->SCp.sent_command = new_phase; /* so we don't recurse... */
-	return do_intr_end;
-}
-
-static inline int skipahead2(struct esp *esp, struct scsi_cmnd *scp,
-			     int prev_phase1, int prev_phase2, int new_phase)
-{
-	if (scp->SCp.sent_command != prev_phase1 &&
-	    scp->SCp.sent_command != prev_phase2)
-		return 0;
-	if (ESP_IRQ_P(esp->dregs)) {
-		/* Yes, we are able to save an interrupt. */
-		if (esp->erev == fashme)
-			esp->sreg2 = sbus_readb(esp->eregs + ESP_STATUS2);
-		esp->sreg = (sbus_readb(esp->eregs + ESP_STATUS) & ~(ESP_STAT_INTR));
-		esp->ireg = sbus_readb(esp->eregs + ESP_INTRPT);
-		if (esp->erev == fashme) {
-			/* This chip is really losing. */
-			ESPHME(("HME["));
-
-			/* Must latch fifo before reading the interrupt
-			 * register else garbage ends up in the FIFO
-			 * which confuses the driver utterly.
-			 * Happy Meal indeed....
-			 */
-			ESPHME(("fifo_workaround]"));
-			if (!(esp->sreg2 & ESP_STAT2_FEMPTY) ||
-			    (esp->sreg2 & ESP_STAT2_F1BYTE))
-				hme_fifo_read(esp);
-		}
-		if (!(esp->ireg & ESP_INTR_SR))
-			return 0;
-		else
-			return do_reset_complete;
-	}
-	/* Ho hum, target is taking forever... */
-	scp->SCp.sent_command = new_phase; /* so we don't recurse... */
-	return do_intr_end;
-}
-
-/* Now some dma helpers. */
-static void dma_setup(struct esp *esp, __u32 addr, int count, int write)
-{
-	u32 nreg = sbus_readl(esp->dregs + DMA_CSR);
-
-	if (write)
-		nreg |= DMA_ST_WRITE;
-	else
-		nreg &= ~(DMA_ST_WRITE);
-	nreg |= DMA_ENABLE;
-	sbus_writel(nreg, esp->dregs + DMA_CSR);
-	if (esp->dma->revision == dvmaesc1) {
-		/* This ESC gate array sucks! */
-		__u32 src = addr;
-		__u32 dest = src + count;
-
-		if (dest & (PAGE_SIZE - 1))
-			count = PAGE_ALIGN(count);
-		sbus_writel(count, esp->dregs + DMA_COUNT);
-	}
-	sbus_writel(addr, esp->dregs + DMA_ADDR);
-}
-
-static void dma_drain(struct esp *esp)
-{
-	u32 tmp;
-
-	if (esp->dma->revision == dvmahme)
-		return;
-	if ((tmp = sbus_readl(esp->dregs + DMA_CSR)) & DMA_FIFO_ISDRAIN) {
-		switch (esp->dma->revision) {
-		default:
-			tmp |= DMA_FIFO_STDRAIN;
-			sbus_writel(tmp, esp->dregs + DMA_CSR);
-
-		case dvmarev3:
-		case dvmaesc1:
-			while (sbus_readl(esp->dregs + DMA_CSR) & DMA_FIFO_ISDRAIN)
-				udelay(1);
-		};
-	}
-}
-
-static void dma_invalidate(struct esp *esp)
-{
-	u32 tmp;
-
-	if (esp->dma->revision == dvmahme) {
-		sbus_writel(DMA_RST_SCSI, esp->dregs + DMA_CSR);
-
-		esp->prev_hme_dmacsr = ((esp->prev_hme_dmacsr |
-					 (DMA_PARITY_OFF | DMA_2CLKS |
-					  DMA_SCSI_DISAB | DMA_INT_ENAB)) &
-					~(DMA_ST_WRITE | DMA_ENABLE));
-
-		sbus_writel(0, esp->dregs + DMA_CSR);
-		sbus_writel(esp->prev_hme_dmacsr, esp->dregs + DMA_CSR);
-
-		/* This is necessary to avoid having the SCSI channel
-		 * engine lock up on us.
-		 */
-		sbus_writel(0, esp->dregs + DMA_ADDR);
-	} else {
-		while ((tmp = sbus_readl(esp->dregs + DMA_CSR)) & DMA_PEND_READ)
-			udelay(1);
-
-		tmp &= ~(DMA_ENABLE | DMA_ST_WRITE | DMA_BCNT_ENAB);
-		tmp |= DMA_FIFO_INV;
-		sbus_writel(tmp, esp->dregs + DMA_CSR);
-		tmp &= ~DMA_FIFO_INV;
-		sbus_writel(tmp, esp->dregs + DMA_CSR);
-	}
-}
-
-static inline void dma_flashclear(struct esp *esp)
-{
-	dma_drain(esp);
-	dma_invalidate(esp);
-}
-
-static int dma_can_transfer(struct esp *esp, struct scsi_cmnd *sp)
-{
-	__u32 base, end, sz;
-
-	if (esp->dma->revision == dvmarev3) {
-		sz = sp->SCp.this_residual;
-		if (sz > 0x1000000)
-			sz = 0x1000000;
-	} else {
-		base = ((__u32)((unsigned long)sp->SCp.ptr));
-		base &= (0x1000000 - 1);
-		end = (base + sp->SCp.this_residual);
-		if (end > 0x1000000)
-			end = 0x1000000;
-		sz = (end - base);
-	}
-	return sz;
-}
-
-/* Misc. esp helper macros. */
-#define esp_setcount(__eregs, __cnt, __hme) \
-	sbus_writeb(((__cnt)&0xff), (__eregs) + ESP_TCLOW); \
-	sbus_writeb((((__cnt)>>8)&0xff), (__eregs) + ESP_TCMED); \
-	if (__hme) { \
-		sbus_writeb((((__cnt)>>16)&0xff), (__eregs) + FAS_RLO); \
-		sbus_writeb(0, (__eregs) + FAS_RHI); \
-	}
-
-#define esp_getcount(__eregs, __hme) \
-	((sbus_readb((__eregs) + ESP_TCLOW)&0xff) | \
-	 ((sbus_readb((__eregs) + ESP_TCMED)&0xff) << 8) | \
-         ((__hme) ? sbus_readb((__eregs) + FAS_RLO) << 16 : 0))
-
-#define fcount(__esp) \
-	(((__esp)->erev == fashme) ? \
-	  (__esp)->hme_fifo_workaround_count : \
-	  sbus_readb(((__esp)->eregs) + ESP_FFLAGS) & ESP_FF_FBYTES)
-
-#define fnzero(__esp) \
-	(((__esp)->erev == fashme) ? 0 : \
-	 sbus_readb(((__esp)->eregs) + ESP_FFLAGS) & ESP_FF_ONOTZERO)
-
-/* XXX speculative nops unnecessary when continuing amidst a data phase
- * XXX even on esp100!!!  another case of flooding the bus with I/O reg
- * XXX writes...
- */
-#define esp_maybe_nop(__esp) \
-	if ((__esp)->erev == esp100) \
-		esp_cmd((__esp), ESP_CMD_NULL)
-
-#define sreg_to_dataphase(__sreg) \
-	((((__sreg) & ESP_STAT_PMASK) == ESP_DOP) ? in_dataout : in_datain)
-
-/* The ESP100 when in synchronous data phase, can mistake a long final
- * REQ pulse from the target as an extra byte, it places whatever is on
- * the data lines into the fifo.  For now, we will assume when this
- * happens that the target is a bit quirky and we don't want to
- * be talking synchronously to it anyways.  Regardless, we need to
- * tell the ESP to eat the extraneous byte so that we can proceed
- * to the next phase.
- */
-static int esp100_sync_hwbug(struct esp *esp, struct scsi_cmnd *sp, int fifocnt)
-{
-	/* Do not touch this piece of code. */
-	if ((!(esp->erev == esp100)) ||
-	    (!(sreg_datainp((esp->sreg = sbus_readb(esp->eregs + ESP_STATUS))) &&
-	       !fifocnt) &&
-	     !(sreg_dataoutp(esp->sreg) && !fnzero(esp)))) {
-		if (sp->SCp.phase == in_dataout)
-			esp_cmd(esp, ESP_CMD_FLUSH);
-		return 0;
-	} else {
-		/* Async mode for this guy. */
-		build_sync_nego_msg(esp, 0, 0);
-
-		/* Ack the bogus byte, but set ATN first. */
-		esp_cmd(esp, ESP_CMD_SATN);
-		esp_cmd(esp, ESP_CMD_MOK);
-		return 1;
-	}
-}
-
-/* This closes the window during a selection with a reselect pending, because
- * we use DMA for the selection process the FIFO should hold the correct
- * contents if we get reselected during this process.  So we just need to
- * ack the possible illegal cmd interrupt pending on the esp100.
- */
-static inline int esp100_reconnect_hwbug(struct esp *esp)
-{
-	u8 tmp;
-
-	if (esp->erev != esp100)
-		return 0;
-	tmp = sbus_readb(esp->eregs + ESP_INTRPT);
-	if (tmp & ESP_INTR_SR)
-		return 1;
-	return 0;
-}
-
-/* This verifies the BUSID bits during a reselection so that we know which
- * target is talking to us.
- */
-static inline int reconnect_target(struct esp *esp)
-{
-	int it, me = esp->scsi_id_mask, targ = 0;
-
-	if (2 != fcount(esp))
-		return -1;
-	if (esp->erev == fashme) {
-		/* HME does not latch it's own BUS ID bits during
-		 * a reselection.  Also the target number is given
-		 * as an unsigned char, not as a sole bit number
-		 * like the other ESP's do.
-		 * Happy Meal indeed....
-		 */
-		targ = esp->hme_fifo_workaround_buffer[0];
-	} else {
-		it = sbus_readb(esp->eregs + ESP_FDATA);
-		if (!(it & me))
-			return -1;
-		it &= ~me;
-		if (it & (it - 1))
-			return -1;
-		while (!(it & 1))
-			targ++, it >>= 1;
-	}
-	return targ;
-}
-
-/* This verifies the identify from the target so that we know which lun is
- * being reconnected.
- */
-static inline int reconnect_lun(struct esp *esp)
-{
-	int lun;
-
-	if ((esp->sreg & ESP_STAT_PMASK) != ESP_MIP)
-		return -1;
-	if (esp->erev == fashme)
-		lun = esp->hme_fifo_workaround_buffer[1];
-	else
-		lun = sbus_readb(esp->eregs + ESP_FDATA);
-
-	/* Yes, you read this correctly.  We report lun of zero
-	 * if we see parity error.  ESP reports parity error for
-	 * the lun byte, and this is the only way to hope to recover
-	 * because the target is connected.
-	 */
-	if (esp->sreg & ESP_STAT_PERR)
-		return 0;
-
-	/* Check for illegal bits being set in the lun. */
-	if ((lun & 0x40) || !(lun & 0x80))
-		return -1;
-
-	return lun & 7;
-}
-
-/* This puts the driver in a state where it can revitalize a command that
- * is being continued due to reselection.
- */
-static inline void esp_connect(struct esp *esp, struct scsi_cmnd *sp)
-{
-	struct esp_device *esp_dev = sp->device->hostdata;
-
-	if (esp->prev_soff  != esp_dev->sync_max_offset ||
-	    esp->prev_stp   != esp_dev->sync_min_period ||
-	    (esp->erev > esp100a &&
-	     esp->prev_cfg3 != esp->config3[sp->device->id])) {
-		esp->prev_soff = esp_dev->sync_max_offset;
-		esp->prev_stp = esp_dev->sync_min_period;
-		sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF);
-		sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP);
-		if (esp->erev > esp100a) {
-			esp->prev_cfg3 = esp->config3[sp->device->id];
-			sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
-		}
-	}
-	esp->current_SC = sp;
-}
-
-/* This will place the current working command back into the issue queue
- * if we are to receive a reselection amidst a selection attempt.
- */
-static inline void esp_reconnect(struct esp *esp, struct scsi_cmnd *sp)
-{
-	if (!esp->disconnected_SC)
-		ESPLOG(("esp%d: Weird, being reselected but disconnected "
-			"command queue is empty.\n", esp->esp_id));
-	esp->snip = 0;
-	esp->current_SC = NULL;
-	sp->SCp.phase = not_issued;
-	append_SC(&esp->issue_SC, sp);
-}
-
-/* Begin message in phase. */
-static int esp_do_msgin(struct esp *esp)
-{
-	/* Must be very careful with the fifo on the HME */
-	if ((esp->erev != fashme) ||
-	    !(sbus_readb(esp->eregs + ESP_STATUS2) & ESP_STAT2_FEMPTY))
-		esp_cmd(esp, ESP_CMD_FLUSH);
-	esp_maybe_nop(esp);
-	esp_cmd(esp, ESP_CMD_TI);
-	esp->msgin_len = 1;
-	esp->msgin_ctr = 0;
-	esp_advance_phase(esp->current_SC, in_msgindone);
-	return do_work_bus;
-}
-
-/* This uses various DMA csr fields and the fifo flags count value to
- * determine how many bytes were successfully sent/received by the ESP.
- */
-static inline int esp_bytes_sent(struct esp *esp, int fifo_count)
-{
-	int rval = sbus_readl(esp->dregs + DMA_ADDR) - esp->esp_command_dvma;
-
-	if (esp->dma->revision == dvmarev1)
-		rval -= (4 - ((sbus_readl(esp->dregs + DMA_CSR) & DMA_READ_AHEAD)>>11));
-	return rval - fifo_count;
-}
-
-static inline void advance_sg(struct scsi_cmnd *sp)
-{
-	++sp->SCp.buffer;
-	--sp->SCp.buffers_residual;
-	sp->SCp.this_residual = sg_dma_len(sp->SCp.buffer);
-	sp->SCp.ptr = (char *)((unsigned long)sg_dma_address(sp->SCp.buffer));
-}
-
-/* Please note that the way I've coded these routines is that I _always_
- * check for a disconnect during any and all information transfer
- * phases.  The SCSI standard states that the target _can_ cause a BUS
- * FREE condition by dropping all MSG/CD/IO/BSY signals.  Also note
- * that during information transfer phases the target controls every
- * change in phase, the only thing the initiator can do is "ask" for
- * a message out phase by driving ATN true.  The target can, and sometimes
- * will, completely ignore this request so we cannot assume anything when
- * we try to force a message out phase to abort/reset a target.  Most of
- * the time the target will eventually be nice and go to message out, so
- * we may have to hold on to our state about what we want to tell the target
- * for some period of time.
- */
-
-/* I think I have things working here correctly.  Even partial transfers
- * within a buffer or sub-buffer should not upset us at all no matter
- * how bad the target and/or ESP fucks things up.
- */
-static int esp_do_data(struct esp *esp)
-{
-	struct scsi_cmnd *SCptr = esp->current_SC;
-	int thisphase, hmuch;
-
-	ESPDATA(("esp_do_data: "));
-	esp_maybe_nop(esp);
-	thisphase = sreg_to_dataphase(esp->sreg);
-	esp_advance_phase(SCptr, thisphase);
-	ESPDATA(("newphase<%s> ", (thisphase == in_datain) ? "DATAIN" : "DATAOUT"));
-	hmuch = dma_can_transfer(esp, SCptr);
-	if (hmuch > (64 * 1024) && (esp->erev != fashme))
-		hmuch = (64 * 1024);
-	ESPDATA(("hmuch<%d> ", hmuch));
-	esp->current_transfer_size = hmuch;
-
-	if (esp->erev == fashme) {
-		u32 tmp = esp->prev_hme_dmacsr;
-
-		/* Always set the ESP count registers first. */
-		esp_setcount(esp->eregs, hmuch, 1);
-
-		/* Get the DMA csr computed. */
-		tmp |= (DMA_SCSI_DISAB | DMA_ENABLE);
-		if (thisphase == in_datain)
-			tmp |= DMA_ST_WRITE;
-		else
-			tmp &= ~(DMA_ST_WRITE);
-		esp->prev_hme_dmacsr = tmp;
-
-		ESPDATA(("DMA|TI --> do_intr_end\n"));
-		if (thisphase == in_datain) {
-			sbus_writel(hmuch, esp->dregs + DMA_COUNT);
-			esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI);
-		} else {
-			esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI);
-			sbus_writel(hmuch, esp->dregs + DMA_COUNT);
-		}
-		sbus_writel((__u32)((unsigned long)SCptr->SCp.ptr), esp->dregs+DMA_ADDR);
-		sbus_writel(esp->prev_hme_dmacsr, esp->dregs + DMA_CSR);
-	} else {
-		esp_setcount(esp->eregs, hmuch, 0);
-		dma_setup(esp, ((__u32)((unsigned long)SCptr->SCp.ptr)),
-			  hmuch, (thisphase == in_datain));
-		ESPDATA(("DMA|TI --> do_intr_end\n"));
-		esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI);
-	}
-	return do_intr_end;
-}
-
-/* See how successful the data transfer was. */
-static int esp_do_data_finale(struct esp *esp)
-{
-	struct scsi_cmnd *SCptr = esp->current_SC;
-	struct esp_device *esp_dev = SCptr->device->hostdata;
-	int bogus_data = 0, bytes_sent = 0, fifocnt, ecount = 0;
-
-	ESPDATA(("esp_do_data_finale: "));
-
-	if (SCptr->SCp.phase == in_datain) {
-		if (esp->sreg & ESP_STAT_PERR) {
-			/* Yuck, parity error.  The ESP asserts ATN
-			 * so that we can go to message out phase
-			 * immediately and inform the target that
-			 * something bad happened.
-			 */
-			ESPLOG(("esp%d: data bad parity detected.\n",
-				esp->esp_id));
-			esp->cur_msgout[0] = INITIATOR_ERROR;
-			esp->msgout_len = 1;
-		}
-		dma_drain(esp);
-	}
-	dma_invalidate(esp);
-
-	/* This could happen for the above parity error case. */
-	if (esp->ireg != ESP_INTR_BSERV) {
-		/* Please go to msgout phase, please please please... */
-		ESPLOG(("esp%d: !BSERV after data, probably to msgout\n",
-			esp->esp_id));
-		return esp_do_phase_determine(esp);
-	}	
-
-	/* Check for partial transfers and other horrible events.
-	 * Note, here we read the real fifo flags register even
-	 * on HME broken adapters because we skip the HME fifo
-	 * workaround code in esp_handle() if we are doing data
-	 * phase things.  We don't want to fuck directly with
-	 * the fifo like that, especially if doing synchronous
-	 * transfers!  Also, will need to double the count on
-	 * HME if we are doing wide transfers, as the HME fifo
-	 * will move and count 16-bit quantities during wide data.
-	 * SMCC _and_ Qlogic can both bite me.
-	 */
-	fifocnt = (sbus_readb(esp->eregs + ESP_FFLAGS) & ESP_FF_FBYTES);
-	if (esp->erev != fashme)
-		ecount = esp_getcount(esp->eregs, 0);
-	bytes_sent = esp->current_transfer_size;
-
-	ESPDATA(("trans_sz(%d), ", bytes_sent));
-	if (esp->erev == fashme) {
-		if (!(esp->sreg & ESP_STAT_TCNT)) {
-			ecount = esp_getcount(esp->eregs, 1);
-			bytes_sent -= ecount;
-		}
-
-		/* Always subtract any cruft remaining in the FIFO. */
-		if (esp->prev_cfg3 & ESP_CONFIG3_EWIDE)
-			fifocnt <<= 1;
-		if (SCptr->SCp.phase == in_dataout)
-			bytes_sent -= fifocnt;
-
-		/* I have an IBM disk which exhibits the following
-		 * behavior during writes to it.  It disconnects in
-		 * the middle of a partial transfer, the current sglist
-		 * buffer is 1024 bytes, the disk stops data transfer
-		 * at 512 bytes.
-		 *
-		 * However the FAS366 reports that 32 more bytes were
-		 * transferred than really were.  This is precisely
-		 * the size of a fully loaded FIFO in wide scsi mode.
-		 * The FIFO state recorded indicates that it is empty.
-		 *
-		 * I have no idea if this is a bug in the FAS366 chip
-		 * or a bug in the firmware on this IBM disk.  In any
-		 * event the following seems to be a good workaround.  -DaveM
-		 */
-		if (bytes_sent != esp->current_transfer_size &&
-		    SCptr->SCp.phase == in_dataout) {
-			int mask = (64 - 1);
-
-			if ((esp->prev_cfg3 & ESP_CONFIG3_EWIDE) == 0)
-				mask >>= 1;
-
-			if (bytes_sent & mask)
-				bytes_sent -= (bytes_sent & mask);
-		}
-	} else {
-		if (!(esp->sreg & ESP_STAT_TCNT))
-			bytes_sent -= ecount;
-		if (SCptr->SCp.phase == in_dataout)
-			bytes_sent -= fifocnt;
-	}
-
-	ESPDATA(("bytes_sent(%d), ", bytes_sent));
-
-	/* If we were in synchronous mode, check for peculiarities. */
-	if (esp->erev == fashme) {
-		if (esp_dev->sync_max_offset) {
-			if (SCptr->SCp.phase == in_dataout)
-				esp_cmd(esp, ESP_CMD_FLUSH);
-		} else {
-			esp_cmd(esp, ESP_CMD_FLUSH);
-		}
-	} else {
-		if (esp_dev->sync_max_offset)
-			bogus_data = esp100_sync_hwbug(esp, SCptr, fifocnt);
-		else
-			esp_cmd(esp, ESP_CMD_FLUSH);
-	}
-
-	/* Until we are sure of what has happened, we are certainly
-	 * in the dark.
-	 */
-	esp_advance_phase(SCptr, in_the_dark);
-
-	if (bytes_sent < 0) {
-		/* I've seen this happen due to lost state in this
-		 * driver.  No idea why it happened, but allowing
-		 * this value to be negative caused things to
-		 * lock up.  This allows greater chance of recovery.
-		 * In fact every time I've seen this, it has been
-		 * a driver bug without question.
-		 */
-		ESPLOG(("esp%d: yieee, bytes_sent < 0!\n", esp->esp_id));
-		ESPLOG(("esp%d: csz=%d fifocount=%d ecount=%d\n",
-			esp->esp_id,
-			esp->current_transfer_size, fifocnt, ecount));
-		ESPLOG(("esp%d: use_sg=%d ptr=%p this_residual=%d\n",
-			esp->esp_id,
-			SCptr->use_sg, SCptr->SCp.ptr, SCptr->SCp.this_residual));
-		ESPLOG(("esp%d: Forcing async for target %d\n", esp->esp_id, 
-			SCptr->device->id));
-		SCptr->device->borken = 1;
-		esp_dev->sync = 0;
-		bytes_sent = 0;
-	}
-
-	/* Update the state of our transfer. */
-	SCptr->SCp.ptr += bytes_sent;
-	SCptr->SCp.this_residual -= bytes_sent;
-	if (SCptr->SCp.this_residual < 0) {
-		/* shit */
-		ESPLOG(("esp%d: Data transfer overrun.\n", esp->esp_id));
-		SCptr->SCp.this_residual = 0;
-	}
-
-	/* Maybe continue. */
-	if (!bogus_data) {
-		ESPDATA(("!bogus_data, "));
-
-		/* NO MATTER WHAT, we advance the scatterlist,
-		 * if the target should decide to disconnect
-		 * in between scatter chunks (which is common)
-		 * we could die horribly!  I used to have the sg
-		 * advance occur only if we are going back into
-		 * (or are staying in) a data phase, you can
-		 * imagine the hell I went through trying to
-		 * figure this out.
-		 */
-		if (SCptr->use_sg && !SCptr->SCp.this_residual)
-			advance_sg(SCptr);
-		if (sreg_datainp(esp->sreg) || sreg_dataoutp(esp->sreg)) {
-			ESPDATA(("to more data\n"));
-			return esp_do_data(esp);
-		}
-		ESPDATA(("to new phase\n"));
-		return esp_do_phase_determine(esp);
-	}
-	/* Bogus data, just wait for next interrupt. */
-	ESPLOG(("esp%d: bogus_data during end of data phase\n",
-		esp->esp_id));
-	return do_intr_end;
-}
-
-/* We received a non-good status return at the end of
- * running a SCSI command.  This is used to decide if
- * we should clear our synchronous transfer state for
- * such a device when that happens.
- *
- * The idea is that when spinning up a disk or rewinding
- * a tape, we don't want to go into a loop re-negotiating
- * synchronous capabilities over and over.
- */
-static int esp_should_clear_sync(struct scsi_cmnd *sp)
-{
-	u8 cmd = sp->cmnd[0];
-
-	/* These cases are for spinning up a disk and
-	 * waiting for that spinup to complete.
-	 */
-	if (cmd == START_STOP)
-		return 0;
-
-	if (cmd == TEST_UNIT_READY)
-		return 0;
-
-	/* One more special case for SCSI tape drives,
-	 * this is what is used to probe the device for
-	 * completion of a rewind or tape load operation.
-	 */
-	if (sp->device->type == TYPE_TAPE) {
-		if (cmd == MODE_SENSE)
-			return 0;
-	}
-
-	return 1;
-}
-
-/* Either a command is completing or a target is dropping off the bus
- * to continue the command in the background so we can do other work.
- */
-static int esp_do_freebus(struct esp *esp)
-{
-	struct scsi_cmnd *SCptr = esp->current_SC;
-	struct esp_device *esp_dev = SCptr->device->hostdata;
-	int rval;
-
-	rval = skipahead2(esp, SCptr, in_status, in_msgindone, in_freeing);
-	if (rval)
-		return rval;
-	if (esp->ireg != ESP_INTR_DC) {
-		ESPLOG(("esp%d: Target will not disconnect\n", esp->esp_id));
-		return do_reset_bus; /* target will not drop BSY... */
-	}
-	esp->msgout_len = 0;
-	esp->prevmsgout = NOP;
-	if (esp->prevmsgin == COMMAND_COMPLETE) {
-		/* Normal end of nexus. */
-		if (esp->disconnected_SC || (esp->erev == fashme))
-			esp_cmd(esp, ESP_CMD_ESEL);
-
-		if (SCptr->SCp.Status != GOOD &&
-		    SCptr->SCp.Status != CONDITION_GOOD &&
-		    ((1<<SCptr->device->id) & esp->targets_present) &&
-		    esp_dev->sync &&
-		    esp_dev->sync_max_offset) {
-			/* SCSI standard says that the synchronous capabilities
-			 * should be renegotiated at this point.  Most likely
-			 * we are about to request sense from this target
-			 * in which case we want to avoid using sync
-			 * transfers until we are sure of the current target
-			 * state.
-			 */
-			ESPMISC(("esp: Status <%d> for target %d lun %d\n",
-				 SCptr->SCp.Status, SCptr->device->id, SCptr->device->lun));
-
-			/* But don't do this when spinning up a disk at
-			 * boot time while we poll for completion as it
-			 * fills up the console with messages.  Also, tapes
-			 * can report not ready many times right after
-			 * loading up a tape.
-			 */
-			if (esp_should_clear_sync(SCptr) != 0)
-				esp_dev->sync = 0;
-		}
-		ESPDISC(("F<%02x,%02x>", SCptr->device->id, SCptr->device->lun));
-		esp_done(esp, ((SCptr->SCp.Status & 0xff) |
-			       ((SCptr->SCp.Message & 0xff)<<8) |
-			       (DID_OK << 16)));
-	} else if (esp->prevmsgin == DISCONNECT) {
-		/* Normal disconnect. */
-		esp_cmd(esp, ESP_CMD_ESEL);
-		ESPDISC(("D<%02x,%02x>", SCptr->device->id, SCptr->device->lun));
-		append_SC(&esp->disconnected_SC, SCptr);
-		esp->current_SC = NULL;
-		if (esp->issue_SC)
-			esp_exec_cmd(esp);
-	} else {
-		/* Driver bug, we do not expect a disconnect here
-		 * and should not have advanced the state engine
-		 * to in_freeing.
-		 */
-		ESPLOG(("esp%d: last msg not disc and not cmd cmplt.\n",
-			esp->esp_id));
-		return do_reset_bus;
-	}
-	return do_intr_end;
-}
-
-/* When a reselect occurs, and we cannot find the command to
- * reconnect to in our queues, we do this.
- */
-static int esp_bad_reconnect(struct esp *esp)
-{
-	struct scsi_cmnd *sp;
-
-	ESPLOG(("esp%d: Eieeee, reconnecting unknown command!\n",
-		esp->esp_id));
-	ESPLOG(("QUEUE DUMP\n"));
-	sp = esp->issue_SC;
-	ESPLOG(("esp%d: issue_SC[", esp->esp_id));
-	while (sp) {
-		ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun));
-		sp = (struct scsi_cmnd *) sp->host_scribble;
-	}
-	ESPLOG(("]\n"));
-	sp = esp->current_SC;
-	ESPLOG(("esp%d: current_SC[", esp->esp_id));
-	if (sp)
-		ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun));
-	else
-		ESPLOG(("<NULL>"));
-	ESPLOG(("]\n"));
-	sp = esp->disconnected_SC;
-	ESPLOG(("esp%d: disconnected_SC[", esp->esp_id));
-	while (sp) {
-		ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun));
-		sp = (struct scsi_cmnd *) sp->host_scribble;
-	}
-	ESPLOG(("]\n"));
-	return do_reset_bus;
-}
-
-/* Do the needy when a target tries to reconnect to us. */
-static int esp_do_reconnect(struct esp *esp)
-{
-	int lun, target;
-	struct scsi_cmnd *SCptr;
-
-	/* Check for all bogus conditions first. */
-	target = reconnect_target(esp);
-	if (target < 0) {
-		ESPDISC(("bad bus bits\n"));
-		return do_reset_bus;
-	}
-	lun = reconnect_lun(esp);
-	if (lun < 0) {
-		ESPDISC(("target=%2x, bad identify msg\n", target));
-		return do_reset_bus;
-	}
-
-	/* Things look ok... */
-	ESPDISC(("R<%02x,%02x>", target, lun));
-
-	/* Must not flush FIFO or DVMA on HME. */
-	if (esp->erev != fashme) {
-		esp_cmd(esp, ESP_CMD_FLUSH);
-		if (esp100_reconnect_hwbug(esp))
-			return do_reset_bus;
-		esp_cmd(esp, ESP_CMD_NULL);
-	}
-
-	SCptr = remove_SC(&esp->disconnected_SC, (u8) target, (u8) lun);
-	if (!SCptr)
-		return esp_bad_reconnect(esp);
-
-	esp_connect(esp, SCptr);
-	esp_cmd(esp, ESP_CMD_MOK);
-
-	if (esp->erev == fashme)
-		sbus_writeb(((SCptr->device->id & 0xf) |
-			     (ESP_BUSID_RESELID | ESP_BUSID_CTR32BIT)),
-			    esp->eregs + ESP_BUSID);
-
-	/* Reconnect implies a restore pointers operation. */
-	esp_restore_pointers(esp, SCptr);
-
-	esp->snip = 0;
-	esp_advance_phase(SCptr, in_the_dark);
-	return do_intr_end;
-}
-
-/* End of NEXUS (hopefully), pick up status + message byte then leave if
- * all goes well.
- */
-static int esp_do_status(struct esp *esp)
-{
-	struct scsi_cmnd *SCptr = esp->current_SC;
-	int intr, rval;
-
-	rval = skipahead1(esp, SCptr, in_the_dark, in_status);
-	if (rval)
-		return rval;
-	intr = esp->ireg;
-	ESPSTAT(("esp_do_status: "));
-	if (intr != ESP_INTR_DC) {
-		int message_out = 0; /* for parity problems */
-
-		/* Ack the message. */
-		ESPSTAT(("ack msg, "));
-		esp_cmd(esp, ESP_CMD_MOK);
-
-		if (esp->erev != fashme) {
-			dma_flashclear(esp);
-
-			/* Wait till the first bits settle. */
-			while (esp->esp_command[0] == 0xff)
-				udelay(1);
-		} else {
-			esp->esp_command[0] = esp->hme_fifo_workaround_buffer[0];
-			esp->esp_command[1] = esp->hme_fifo_workaround_buffer[1];
-		}
-
-		ESPSTAT(("got something, "));
-		/* ESP chimes in with one of
-		 *
-		 * 1) function done interrupt:
-		 *	both status and message in bytes
-		 *	are available
-		 *
-		 * 2) bus service interrupt:
-		 *	only status byte was acquired
-		 *
-		 * 3) Anything else:
-		 *	can't happen, but we test for it
-		 *	anyways
-		 *
-		 * ALSO: If bad parity was detected on either
-		 *       the status _or_ the message byte then
-		 *       the ESP has asserted ATN on the bus
-		 *       and we must therefore wait for the
-		 *       next phase change.
-		 */
-		if (intr & ESP_INTR_FDONE) {
-			/* We got it all, hallejulia. */
-			ESPSTAT(("got both, "));
-			SCptr->SCp.Status = esp->esp_command[0];
-			SCptr->SCp.Message = esp->esp_command[1];
-			esp->prevmsgin = SCptr->SCp.Message;
-			esp->cur_msgin[0] = SCptr->SCp.Message;
-			if (esp->sreg & ESP_STAT_PERR) {
-				/* There was bad parity for the
-				 * message byte, the status byte
-				 * was ok.
-				 */
-				message_out = MSG_PARITY_ERROR;
-			}
-		} else if (intr == ESP_INTR_BSERV) {
-			/* Only got status byte. */
-			ESPLOG(("esp%d: got status only, ", esp->esp_id));
-			if (!(esp->sreg & ESP_STAT_PERR)) {
-				SCptr->SCp.Status = esp->esp_command[0];
-				SCptr->SCp.Message = 0xff;
-			} else {
-				/* The status byte had bad parity.
-				 * we leave the scsi_pointer Status
-				 * field alone as we set it to a default
-				 * of CHECK_CONDITION in esp_queue.
-				 */
-				message_out = INITIATOR_ERROR;
-			}
-		} else {
-			/* This shouldn't happen ever. */
-			ESPSTAT(("got bolixed\n"));
-			esp_advance_phase(SCptr, in_the_dark);
-			return esp_do_phase_determine(esp);
-		}
-
-		if (!message_out) {
-			ESPSTAT(("status=%2x msg=%2x, ", SCptr->SCp.Status,
-				SCptr->SCp.Message));
-			if (SCptr->SCp.Message == COMMAND_COMPLETE) {
-				ESPSTAT(("and was COMMAND_COMPLETE\n"));
-				esp_advance_phase(SCptr, in_freeing);
-				return esp_do_freebus(esp);
-			} else {
-				ESPLOG(("esp%d: and _not_ COMMAND_COMPLETE\n",
-					esp->esp_id));
-				esp->msgin_len = esp->msgin_ctr = 1;
-				esp_advance_phase(SCptr, in_msgindone);
-				return esp_do_msgindone(esp);
-			}
-		} else {
-			/* With luck we'll be able to let the target
-			 * know that bad parity happened, it will know
-			 * which byte caused the problems and send it
-			 * again.  For the case where the status byte
-			 * receives bad parity, I do not believe most
-			 * targets recover very well.  We'll see.
-			 */
-			ESPLOG(("esp%d: bad parity somewhere mout=%2x\n",
-				esp->esp_id, message_out));
-			esp->cur_msgout[0] = message_out;
-			esp->msgout_len = esp->msgout_ctr = 1;
-			esp_advance_phase(SCptr, in_the_dark);
-			return esp_do_phase_determine(esp);
-		}
-	} else {
-		/* If we disconnect now, all hell breaks loose. */
-		ESPLOG(("esp%d: whoops, disconnect\n", esp->esp_id));
-		esp_advance_phase(SCptr, in_the_dark);
-		return esp_do_phase_determine(esp);
-	}
-}
-
-static int esp_enter_status(struct esp *esp)
-{
-	u8 thecmd = ESP_CMD_ICCSEQ;
-
-	esp_cmd(esp, ESP_CMD_FLUSH);
-	if (esp->erev != fashme) {
-		u32 tmp;
-
-		esp->esp_command[0] = esp->esp_command[1] = 0xff;
-		sbus_writeb(2, esp->eregs + ESP_TCLOW);
-		sbus_writeb(0, esp->eregs + ESP_TCMED);
-		tmp = sbus_readl(esp->dregs + DMA_CSR);
-		tmp |= (DMA_ST_WRITE | DMA_ENABLE);
-		sbus_writel(tmp, esp->dregs + DMA_CSR);
-		if (esp->dma->revision == dvmaesc1)
-			sbus_writel(0x100, esp->dregs + DMA_COUNT);
-		sbus_writel(esp->esp_command_dvma, esp->dregs + DMA_ADDR);
-		thecmd |= ESP_CMD_DMA;
-	}
-	esp_cmd(esp, thecmd);
-	esp_advance_phase(esp->current_SC, in_status);
-
-	return esp_do_status(esp);
-}
-
-static int esp_disconnect_amidst_phases(struct esp *esp)
-{
-	struct scsi_cmnd *sp = esp->current_SC;
-	struct esp_device *esp_dev = sp->device->hostdata;
-
-	/* This means real problems if we see this
-	 * here.  Unless we were actually trying
-	 * to force the device to abort/reset.
-	 */
-	ESPLOG(("esp%d Disconnect amidst phases, ", esp->esp_id));
-	ESPLOG(("pphase<%s> cphase<%s>, ",
-		phase_string(sp->SCp.phase),
-		phase_string(sp->SCp.sent_command)));
-
-	if (esp->disconnected_SC != NULL || (esp->erev == fashme))
-		esp_cmd(esp, ESP_CMD_ESEL);
-
-	switch (esp->cur_msgout[0]) {
-	default:
-		/* We didn't expect this to happen at all. */
-		ESPLOG(("device is bolixed\n"));
-		esp_advance_phase(sp, in_tgterror);
-		esp_done(esp, (DID_ERROR << 16));
-		break;
-
-	case BUS_DEVICE_RESET:
-		ESPLOG(("device reset successful\n"));
-		esp_dev->sync_max_offset = 0;
-		esp_dev->sync_min_period = 0;
-		esp_dev->sync = 0;
-		esp_advance_phase(sp, in_resetdev);
-		esp_done(esp, (DID_RESET << 16));
-		break;
-
-	case ABORT:
-		ESPLOG(("device abort successful\n"));
-		esp_advance_phase(sp, in_abortone);
-		esp_done(esp, (DID_ABORT << 16));
-		break;
-
-	};
-	return do_intr_end;
-}
-
-static int esp_enter_msgout(struct esp *esp)
-{
-	esp_advance_phase(esp->current_SC, in_msgout);
-	return esp_do_msgout(esp);
-}
-
-static int esp_enter_msgin(struct esp *esp)
-{
-	esp_advance_phase(esp->current_SC, in_msgin);
-	return esp_do_msgin(esp);
-}
-
-static int esp_enter_cmd(struct esp *esp)
-{
-	esp_advance_phase(esp->current_SC, in_cmdbegin);
-	return esp_do_cmdbegin(esp);
-}
-
-static int esp_enter_badphase(struct esp *esp)
-{
-	ESPLOG(("esp%d: Bizarre bus phase %2x.\n", esp->esp_id,
-		esp->sreg & ESP_STAT_PMASK));
-	return do_reset_bus;
-}
-
-typedef int (*espfunc_t)(struct esp *);
-
-static espfunc_t phase_vector[] = {
-	esp_do_data,		/* ESP_DOP */
-	esp_do_data,		/* ESP_DIP */
-	esp_enter_cmd,		/* ESP_CMDP */
-	esp_enter_status,	/* ESP_STATP */
-	esp_enter_badphase,	/* ESP_STAT_PMSG */
-	esp_enter_badphase,	/* ESP_STAT_PMSG | ESP_STAT_PIO */
-	esp_enter_msgout,	/* ESP_MOP */
-	esp_enter_msgin,	/* ESP_MIP */
-};
-
-/* The target has control of the bus and we have to see where it has
- * taken us.
- */
-static int esp_do_phase_determine(struct esp *esp)
-{
-	if ((esp->ireg & ESP_INTR_DC) != 0)
-		return esp_disconnect_amidst_phases(esp);
-	return phase_vector[esp->sreg & ESP_STAT_PMASK](esp);
-}
-
-/* First interrupt after exec'ing a cmd comes here. */
-static int esp_select_complete(struct esp *esp)
-{
-	struct scsi_cmnd *SCptr = esp->current_SC;
-	struct esp_device *esp_dev = SCptr->device->hostdata;
-	int cmd_bytes_sent, fcnt;
-
-	if (esp->erev != fashme)
-		esp->seqreg = (sbus_readb(esp->eregs + ESP_SSTEP) & ESP_STEP_VBITS);
-
-	if (esp->erev == fashme)
-		fcnt = esp->hme_fifo_workaround_count;
-	else
-		fcnt = (sbus_readb(esp->eregs + ESP_FFLAGS) & ESP_FF_FBYTES);
-
-	cmd_bytes_sent = esp_bytes_sent(esp, fcnt);
-	dma_invalidate(esp);
-
-	/* Let's check to see if a reselect happened
-	 * while we we're trying to select.  This must
-	 * be checked first.
-	 */
-	if (esp->ireg == (ESP_INTR_RSEL | ESP_INTR_FDONE)) {
-		esp_reconnect(esp, SCptr);
-		return esp_do_reconnect(esp);
-	}
-
-	/* Looks like things worked, we should see a bus service &
-	 * a function complete interrupt at this point.  Note we
-	 * are doing a direct comparison because we don't want to
-	 * be fooled into thinking selection was successful if
-	 * ESP_INTR_DC is set, see below.
-	 */
-	if (esp->ireg == (ESP_INTR_FDONE | ESP_INTR_BSERV)) {
-		/* target speaks... */
-		esp->targets_present |= (1<<SCptr->device->id);
-
-		/* What if the target ignores the sdtr? */
-		if (esp->snip)
-			esp_dev->sync = 1;
-
-		/* See how far, if at all, we got in getting
-		 * the information out to the target.
-		 */
-		switch (esp->seqreg) {
-		default:
-
-		case ESP_STEP_ASEL:
-			/* Arbitration won, target selected, but
-			 * we are in some phase which is not command
-			 * phase nor is it message out phase.
-			 *
-			 * XXX We've confused the target, obviously.
-			 * XXX So clear it's state, but we also end
-			 * XXX up clearing everyone elses.  That isn't
-			 * XXX so nice.  I'd like to just reset this
-			 * XXX target, but if I cannot even get it's
-			 * XXX attention and finish selection to talk
-			 * XXX to it, there is not much more I can do.
-			 * XXX If we have a loaded bus we're going to
-			 * XXX spend the next second or so renegotiating
-			 * XXX for synchronous transfers.
-			 */
-			ESPLOG(("esp%d: STEP_ASEL for tgt %d\n",
-				esp->esp_id, SCptr->device->id));
-
-		case ESP_STEP_SID:
-			/* Arbitration won, target selected, went
-			 * to message out phase, sent one message
-			 * byte, then we stopped.  ATN is asserted
-			 * on the SCSI bus and the target is still
-			 * there hanging on.  This is a legal
-			 * sequence step if we gave the ESP a select
-			 * and stop command.
-			 *
-			 * XXX See above, I could set the borken flag
-			 * XXX in the device struct and retry the
-			 * XXX command.  But would that help for
-			 * XXX tagged capable targets?
-			 */
-
-		case ESP_STEP_NCMD:
-			/* Arbitration won, target selected, maybe
-			 * sent the one message byte in message out
-			 * phase, but we did not go to command phase
-			 * in the end.  Actually, we could have sent
-			 * only some of the message bytes if we tried
-			 * to send out the entire identify and tag
-			 * message using ESP_CMD_SA3.
-			 */
-			cmd_bytes_sent = 0;
-			break;
-
-		case ESP_STEP_PPC:
-			/* No, not the powerPC pinhead.  Arbitration
-			 * won, all message bytes sent if we went to
-			 * message out phase, went to command phase
-			 * but only part of the command was sent.
-			 *
-			 * XXX I've seen this, but usually in conjunction
-			 * XXX with a gross error which appears to have
-			 * XXX occurred between the time I told the
-			 * XXX ESP to arbitrate and when I got the
-			 * XXX interrupt.  Could I have misloaded the
-			 * XXX command bytes into the fifo?  Actually,
-			 * XXX I most likely missed a phase, and therefore
-			 * XXX went into never never land and didn't even
-			 * XXX know it.  That was the old driver though.
-			 * XXX What is even more peculiar is that the ESP
-			 * XXX showed the proper function complete and
-			 * XXX bus service bits in the interrupt register.
-			 */
-
-		case ESP_STEP_FINI4:
-		case ESP_STEP_FINI5:
-		case ESP_STEP_FINI6:
-		case ESP_STEP_FINI7:
-			/* Account for the identify message */
-			if (SCptr->SCp.phase == in_slct_norm)
-				cmd_bytes_sent -= 1;
-		};
-
-		if (esp->erev != fashme)
-			esp_cmd(esp, ESP_CMD_NULL);
-
-		/* Be careful, we could really get fucked during synchronous
-		 * data transfers if we try to flush the fifo now.
-		 */
-		if ((esp->erev != fashme) && /* not a Happy Meal and... */
-		    !fcnt && /* Fifo is empty and... */
-		    /* either we are not doing synchronous transfers or... */
-		    (!esp_dev->sync_max_offset ||
-		     /* We are not going into data in phase. */
-		     ((esp->sreg & ESP_STAT_PMASK) != ESP_DIP)))
-			esp_cmd(esp, ESP_CMD_FLUSH); /* flush is safe */
-
-		/* See how far we got if this is not a slow command. */
-		if (!esp->esp_slowcmd) {
-			if (cmd_bytes_sent < 0)
-				cmd_bytes_sent = 0;
-			if (cmd_bytes_sent != SCptr->cmd_len) {
-				/* Crapola, mark it as a slowcmd
-				 * so that we have some chance of
-				 * keeping the command alive with
-				 * good luck.
-				 *
-				 * XXX Actually, if we didn't send it all
-				 * XXX this means either we didn't set things
-				 * XXX up properly (driver bug) or the target
-				 * XXX or the ESP detected parity on one of
-				 * XXX the command bytes.  This makes much
-				 * XXX more sense, and therefore this code
-				 * XXX should be changed to send out a
-				 * XXX parity error message or if the status
-				 * XXX register shows no parity error then
-				 * XXX just expect the target to bring the
-				 * XXX bus into message in phase so that it
-				 * XXX can send us the parity error message.
-				 * XXX SCSI sucks...
-				 */
-				esp->esp_slowcmd = 1;
-				esp->esp_scmdp = &(SCptr->cmnd[cmd_bytes_sent]);
-				esp->esp_scmdleft = (SCptr->cmd_len - cmd_bytes_sent);
-			}
-		}
-
-		/* Now figure out where we went. */
-		esp_advance_phase(SCptr, in_the_dark);
-		return esp_do_phase_determine(esp);
-	}
-
-	/* Did the target even make it? */
-	if (esp->ireg == ESP_INTR_DC) {
-		/* wheee... nobody there or they didn't like
-		 * what we told it to do, clean up.
-		 */
-
-		/* If anyone is off the bus, but working on
-		 * a command in the background for us, tell
-		 * the ESP to listen for them.
-		 */
-		if (esp->disconnected_SC)
-			esp_cmd(esp, ESP_CMD_ESEL);
-
-		if (((1<<SCptr->device->id) & esp->targets_present) &&
-		    esp->seqreg != 0 &&
-		    (esp->cur_msgout[0] == EXTENDED_MESSAGE) &&
-		    (SCptr->SCp.phase == in_slct_msg ||
-		     SCptr->SCp.phase == in_slct_stop)) {
-			/* shit */
-			esp->snip = 0;
-			ESPLOG(("esp%d: Failed synchronous negotiation for target %d "
-				"lun %d\n", esp->esp_id, SCptr->device->id, SCptr->device->lun));
-			esp_dev->sync_max_offset = 0;
-			esp_dev->sync_min_period = 0;
-			esp_dev->sync = 1; /* so we don't negotiate again */
-
-			/* Run the command again, this time though we
-			 * won't try to negotiate for synchronous transfers.
-			 *
-			 * XXX I'd like to do something like send an
-			 * XXX INITIATOR_ERROR or ABORT message to the
-			 * XXX target to tell it, "Sorry I confused you,
-			 * XXX please come back and I will be nicer next
-			 * XXX time".  But that requires having the target
-			 * XXX on the bus, and it has dropped BSY on us.
-			 */
-			esp->current_SC = NULL;
-			esp_advance_phase(SCptr, not_issued);
-			prepend_SC(&esp->issue_SC, SCptr);
-			esp_exec_cmd(esp);
-			return do_intr_end;
-		}
-
-		/* Ok, this is normal, this is what we see during boot
-		 * or whenever when we are scanning the bus for targets.
-		 * But first make sure that is really what is happening.
-		 */
-		if (((1<<SCptr->device->id) & esp->targets_present)) {
-			ESPLOG(("esp%d: Warning, live target %d not responding to "
-				"selection.\n", esp->esp_id, SCptr->device->id));
-
-			/* This _CAN_ happen.  The SCSI standard states that
-			 * the target is to _not_ respond to selection if
-			 * _it_ detects bad parity on the bus for any reason.
-			 * Therefore, we assume that if we've talked successfully
-			 * to this target before, bad parity is the problem.
-			 */
-			esp_done(esp, (DID_PARITY << 16));
-		} else {
-			/* Else, there really isn't anyone there. */
-			ESPMISC(("esp: selection failure, maybe nobody there?\n"));
-			ESPMISC(("esp: target %d lun %d\n",
-				 SCptr->device->id, SCptr->device->lun));
-			esp_done(esp, (DID_BAD_TARGET << 16));
-		}
-		return do_intr_end;
-	}
-
-	ESPLOG(("esp%d: Selection failure.\n", esp->esp_id));
-	printk("esp%d: Currently -- ", esp->esp_id);
-	esp_print_ireg(esp->ireg); printk(" ");
-	esp_print_statreg(esp->sreg); printk(" ");
-	esp_print_seqreg(esp->seqreg); printk("\n");
-	printk("esp%d: New -- ", esp->esp_id);
-	esp->sreg = sbus_readb(esp->eregs + ESP_STATUS);
-	esp->seqreg = sbus_readb(esp->eregs + ESP_SSTEP);
-	esp->ireg = sbus_readb(esp->eregs + ESP_INTRPT);
-	esp_print_ireg(esp->ireg); printk(" ");
-	esp_print_statreg(esp->sreg); printk(" ");
-	esp_print_seqreg(esp->seqreg); printk("\n");
-	ESPLOG(("esp%d: resetting bus\n", esp->esp_id));
-	return do_reset_bus; /* ugh... */
-}
-
-/* Continue reading bytes for msgin phase. */
-static int esp_do_msgincont(struct esp *esp)
-{
-	if (esp->ireg & ESP_INTR_BSERV) {
-		/* in the right phase too? */
-		if ((esp->sreg & ESP_STAT_PMASK) == ESP_MIP) {
-			/* phew... */
-			esp_cmd(esp, ESP_CMD_TI);
-			esp_advance_phase(esp->current_SC, in_msgindone);
-			return do_intr_end;
-		}
-
-		/* We changed phase but ESP shows bus service,
-		 * in this case it is most likely that we, the
-		 * hacker who has been up for 20hrs straight
-		 * staring at the screen, drowned in coffee
-		 * smelling like retched cigarette ashes
-		 * have miscoded something..... so, try to
-		 * recover as best we can.
-		 */
-		ESPLOG(("esp%d: message in mis-carriage.\n", esp->esp_id));
-	}
-	esp_advance_phase(esp->current_SC, in_the_dark);
-	return do_phase_determine;
-}
-
-static int check_singlebyte_msg(struct esp *esp)
-{
-	esp->prevmsgin = esp->cur_msgin[0];
-	if (esp->cur_msgin[0] & 0x80) {
-		/* wheee... */
-		ESPLOG(("esp%d: target sends identify amidst phases\n",
-			esp->esp_id));
-		esp_advance_phase(esp->current_SC, in_the_dark);
-		return 0;
-	} else if (((esp->cur_msgin[0] & 0xf0) == 0x20) ||
-		   (esp->cur_msgin[0] == EXTENDED_MESSAGE)) {
-		esp->msgin_len = 2;
-		esp_advance_phase(esp->current_SC, in_msgincont);
-		return 0;
-	}
-	esp_advance_phase(esp->current_SC, in_the_dark);
-	switch (esp->cur_msgin[0]) {
-	default:
-		/* We don't want to hear about it. */
-		ESPLOG(("esp%d: msg %02x which we don't know about\n", esp->esp_id,
-			esp->cur_msgin[0]));
-		return MESSAGE_REJECT;
-
-	case NOP:
-		ESPLOG(("esp%d: target %d sends a nop\n", esp->esp_id,
-			esp->current_SC->device->id));
-		return 0;
-
-	case RESTORE_POINTERS:
-		/* In this case we might also have to backup the
-		 * "slow command" pointer.  It is rare to get such
-		 * a save/restore pointer sequence so early in the
-		 * bus transition sequences, but cover it.
-		 */
-		if (esp->esp_slowcmd) {
-			esp->esp_scmdleft = esp->current_SC->cmd_len;
-			esp->esp_scmdp = &esp->current_SC->cmnd[0];
-		}
-		esp_restore_pointers(esp, esp->current_SC);
-		return 0;
-
-	case SAVE_POINTERS:
-		esp_save_pointers(esp, esp->current_SC);
-		return 0;
-
-	case COMMAND_COMPLETE:
-	case DISCONNECT:
-		/* Freeing the bus, let it go. */
-		esp->current_SC->SCp.phase = in_freeing;
-		return 0;
-
-	case MESSAGE_REJECT:
-		ESPMISC(("msg reject, "));
-		if (esp->prevmsgout == EXTENDED_MESSAGE) {
-			struct esp_device *esp_dev = esp->current_SC->device->hostdata;
-
-			/* Doesn't look like this target can
-			 * do synchronous or WIDE transfers.
-			 */
-			ESPSDTR(("got reject, was trying nego, clearing sync/WIDE\n"));
-			esp_dev->sync = 1;
-			esp_dev->wide = 1;
-			esp_dev->sync_min_period = 0;
-			esp_dev->sync_max_offset = 0;
-			return 0;
-		} else {
-			ESPMISC(("not sync nego, sending ABORT\n"));
-			return ABORT;
-		}
-	};
-}
-
-/* Target negotiates for synchronous transfers before we do, this
- * is legal although very strange.  What is even funnier is that
- * the SCSI2 standard specifically recommends against targets doing
- * this because so many initiators cannot cope with this occurring.
- */
-static int target_with_ants_in_pants(struct esp *esp,
-				     struct scsi_cmnd *SCptr,
-				     struct esp_device *esp_dev)
-{
-	if (esp_dev->sync || SCptr->device->borken) {
-		/* sorry, no can do */
-		ESPSDTR(("forcing to async, "));
-		build_sync_nego_msg(esp, 0, 0);
-		esp_dev->sync = 1;
-		esp->snip = 1;
-		ESPLOG(("esp%d: hoping for msgout\n", esp->esp_id));
-		esp_advance_phase(SCptr, in_the_dark);
-		return EXTENDED_MESSAGE;
-	}
-
-	/* Ok, we'll check them out... */
-	return 0;
-}
-
-static void sync_report(struct esp *esp)
-{
-	int msg3, msg4;
-	char *type;
-
-	msg3 = esp->cur_msgin[3];
-	msg4 = esp->cur_msgin[4];
-	if (msg4) {
-		int hz = 1000000000 / (msg3 * 4);
-		int integer = hz / 1000000;
-		int fraction = (hz - (integer * 1000000)) / 10000;
-		if ((esp->erev == fashme) &&
-		    (esp->config3[esp->current_SC->device->id] & ESP_CONFIG3_EWIDE)) {
-			type = "FAST-WIDE";
-			integer <<= 1;
-			fraction <<= 1;
-		} else if ((msg3 * 4) < 200) {
-			type = "FAST";
-		} else {
-			type = "synchronous";
-		}
-
-		/* Do not transform this back into one big printk
-		 * again, it triggers a bug in our sparc64-gcc272
-		 * sibling call optimization.  -DaveM
-		 */
-		ESPLOG((KERN_INFO "esp%d: target %d ",
-			esp->esp_id, esp->current_SC->device->id));
-		ESPLOG(("[period %dns offset %d %d.%02dMHz ",
-			(int) msg3 * 4, (int) msg4,
-			integer, fraction));
-		ESPLOG(("%s SCSI%s]\n", type,
-			(((msg3 * 4) < 200) ? "-II" : "")));
-	} else {
-		ESPLOG((KERN_INFO "esp%d: target %d asynchronous\n",
-			esp->esp_id, esp->current_SC->device->id));
-	}
-}
-
-static int check_multibyte_msg(struct esp *esp)
-{
-	struct scsi_cmnd *SCptr = esp->current_SC;
-	struct esp_device *esp_dev = SCptr->device->hostdata;
-	u8 regval = 0;
-	int message_out = 0;
-
-	ESPSDTR(("chk multibyte msg: "));
-	if (esp->cur_msgin[2] == EXTENDED_SDTR) {
-		int period = esp->cur_msgin[3];
-		int offset = esp->cur_msgin[4];
-
-		ESPSDTR(("is sync nego response, "));
-		if (!esp->snip) {
-			int rval;
-
-			/* Target negotiates first! */
-			ESPSDTR(("target jumps the gun, "));
-			message_out = EXTENDED_MESSAGE; /* we must respond */
-			rval = target_with_ants_in_pants(esp, SCptr, esp_dev);
-			if (rval)
-				return rval;
-		}
-
-		ESPSDTR(("examining sdtr, "));
-
-		/* Offset cannot be larger than ESP fifo size. */
-		if (offset > 15) {
-			ESPSDTR(("offset too big %2x, ", offset));
-			offset = 15;
-			ESPSDTR(("sending back new offset\n"));
-			build_sync_nego_msg(esp, period, offset);
-			return EXTENDED_MESSAGE;
-		}
-
-		if (offset && period > esp->max_period) {
-			/* Yeee, async for this slow device. */
-			ESPSDTR(("period too long %2x, ", period));
-			build_sync_nego_msg(esp, 0, 0);
-			ESPSDTR(("hoping for msgout\n"));
-			esp_advance_phase(esp->current_SC, in_the_dark);
-			return EXTENDED_MESSAGE;
-		} else if (offset && period < esp->min_period) {
-			ESPSDTR(("period too short %2x, ", period));
-			period = esp->min_period;
-			if (esp->erev > esp236)
-				regval = 4;
-			else
-				regval = 5;
-		} else if (offset) {
-			int tmp;
-
-			ESPSDTR(("period is ok, "));
-			tmp = esp->ccycle / 1000;
-			regval = (((period << 2) + tmp - 1) / tmp);
-			if (regval && ((esp->erev == fas100a ||
-					esp->erev == fas236  ||
-					esp->erev == fashme))) {
-				if (period >= 50)
-					regval--;
-			}
-		}
-
-		if (offset) {
-			u8 bit;
-
-			esp_dev->sync_min_period = (regval & 0x1f);
-			esp_dev->sync_max_offset = (offset | esp->radelay);
-			if (esp->erev == fas100a || esp->erev == fas236 || esp->erev == fashme) {
-				if ((esp->erev == fas100a) || (esp->erev == fashme))
-					bit = ESP_CONFIG3_FAST;
-				else
-					bit = ESP_CONFIG3_FSCSI;
-				if (period < 50) {
-					/* On FAS366, if using fast-20 synchronous transfers
-					 * we need to make sure the REQ/ACK assert/deassert
-					 * control bits are clear.
-					 */
-					if (esp->erev == fashme)
-						esp_dev->sync_max_offset &= ~esp->radelay;
-					esp->config3[SCptr->device->id] |= bit;
-				} else {
-					esp->config3[SCptr->device->id] &= ~bit;
-				}
-				esp->prev_cfg3 = esp->config3[SCptr->device->id];
-				sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
-			}
-			esp->prev_soff = esp_dev->sync_max_offset;
-			esp->prev_stp = esp_dev->sync_min_period;
-			sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF);
-			sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP);
-			ESPSDTR(("soff=%2x stp=%2x cfg3=%2x\n",
-				 esp_dev->sync_max_offset,
-				 esp_dev->sync_min_period,
-				 esp->config3[SCptr->device->id]));
-
-			esp->snip = 0;
-		} else if (esp_dev->sync_max_offset) {
-			u8 bit;
-
-			/* back to async mode */
-			ESPSDTR(("unaccaptable sync nego, forcing async\n"));
-			esp_dev->sync_max_offset = 0;
-			esp_dev->sync_min_period = 0;
-			esp->prev_soff = 0;
-			esp->prev_stp = 0;
-			sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF);
-			sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP);
-			if (esp->erev == fas100a || esp->erev == fas236 || esp->erev == fashme) {
-				if ((esp->erev == fas100a) || (esp->erev == fashme))
-					bit = ESP_CONFIG3_FAST;
-				else
-					bit = ESP_CONFIG3_FSCSI;
-				esp->config3[SCptr->device->id] &= ~bit;
-				esp->prev_cfg3 = esp->config3[SCptr->device->id];
-				sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
-			}
-		}
-
-		sync_report(esp);
-
-		ESPSDTR(("chk multibyte msg: sync is known, "));
-		esp_dev->sync = 1;
-
-		if (message_out) {
-			ESPLOG(("esp%d: sending sdtr back, hoping for msgout\n",
-				esp->esp_id));
-			build_sync_nego_msg(esp, period, offset);
-			esp_advance_phase(SCptr, in_the_dark);
-			return EXTENDED_MESSAGE;
-		}
-
-		ESPSDTR(("returning zero\n"));
-		esp_advance_phase(SCptr, in_the_dark); /* ...or else! */
-		return 0;
-	} else if (esp->cur_msgin[2] == EXTENDED_WDTR) {
-		int size = 8 << esp->cur_msgin[3];
-
-		esp->wnip = 0;
-		if (esp->erev != fashme) {
-			ESPLOG(("esp%d: AIEEE wide msg received and not HME.\n",
-				esp->esp_id));
-			message_out = MESSAGE_REJECT;
-		} else if (size > 16) {
-			ESPLOG(("esp%d: AIEEE wide transfer for %d size "
-				"not supported.\n", esp->esp_id, size));
-			message_out = MESSAGE_REJECT;
-		} else {
-			/* Things look good; let's see what we got. */
-			if (size == 16) {
-				/* Set config 3 register for this target. */
-				esp->config3[SCptr->device->id] |= ESP_CONFIG3_EWIDE;
-			} else {
-				/* Just make sure it was one byte sized. */
-				if (size != 8) {
-					ESPLOG(("esp%d: Aieee, wide nego of %d size.\n",
-						esp->esp_id, size));
-					message_out = MESSAGE_REJECT;
-					goto finish;
-				}
-				/* Pure paranoia. */
-				esp->config3[SCptr->device->id] &= ~(ESP_CONFIG3_EWIDE);
-			}
-			esp->prev_cfg3 = esp->config3[SCptr->device->id];
-			sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
-
-			/* Regardless, next try for sync transfers. */
-			build_sync_nego_msg(esp, esp->sync_defp, 15);
-			esp_dev->sync = 1;
-			esp->snip = 1;
-			message_out = EXTENDED_MESSAGE;
-		}
-	} else if (esp->cur_msgin[2] == EXTENDED_MODIFY_DATA_POINTER) {
-		ESPLOG(("esp%d: rejecting modify data ptr msg\n", esp->esp_id));
-		message_out = MESSAGE_REJECT;
-	}
-finish:
-	esp_advance_phase(SCptr, in_the_dark);
-	return message_out;
-}
-
-static int esp_do_msgindone(struct esp *esp)
-{
-	struct scsi_cmnd *SCptr = esp->current_SC;
-	int message_out = 0, it = 0, rval;
-
-	rval = skipahead1(esp, SCptr, in_msgin, in_msgindone);
-	if (rval)
-		return rval;
-	if (SCptr->SCp.sent_command != in_status) {
-		if (!(esp->ireg & ESP_INTR_DC)) {
-			if (esp->msgin_len && (esp->sreg & ESP_STAT_PERR)) {
-				message_out = MSG_PARITY_ERROR;
-				esp_cmd(esp, ESP_CMD_FLUSH);
-			} else if (esp->erev != fashme &&
-			  (it = (sbus_readb(esp->eregs + ESP_FFLAGS) & ESP_FF_FBYTES)) != 1) {
-				/* We certainly dropped the ball somewhere. */
-				message_out = INITIATOR_ERROR;
-				esp_cmd(esp, ESP_CMD_FLUSH);
-			} else if (!esp->msgin_len) {
-				if (esp->erev == fashme)
-					it = esp->hme_fifo_workaround_buffer[0];
-				else
-					it = sbus_readb(esp->eregs + ESP_FDATA);
-				esp_advance_phase(SCptr, in_msgincont);
-			} else {
-				/* it is ok and we want it */
-				if (esp->erev == fashme)
-					it = esp->cur_msgin[esp->msgin_ctr] =
-						esp->hme_fifo_workaround_buffer[0];
-				else
-					it = esp->cur_msgin[esp->msgin_ctr] =
-						sbus_readb(esp->eregs + ESP_FDATA);
-				esp->msgin_ctr++;
-			}
-		} else {
-			esp_advance_phase(SCptr, in_the_dark);
-			return do_work_bus;
-		}
-	} else {
-		it = esp->cur_msgin[0];
-	}
-	if (!message_out && esp->msgin_len) {
-		if (esp->msgin_ctr < esp->msgin_len) {
-			esp_advance_phase(SCptr, in_msgincont);
-		} else if (esp->msgin_len == 1) {
-			message_out = check_singlebyte_msg(esp);
-		} else if (esp->msgin_len == 2) {
-			if (esp->cur_msgin[0] == EXTENDED_MESSAGE) {
-				if ((it + 2) >= 15) {
-					message_out = MESSAGE_REJECT;
-				} else {
-					esp->msgin_len = (it + 2);
-					esp_advance_phase(SCptr, in_msgincont);
-				}
-			} else {
-				message_out = MESSAGE_REJECT; /* foo on you */
-			}
-		} else {
-			message_out = check_multibyte_msg(esp);
-		}
-	}
-	if (message_out < 0) {
-		return -message_out;
-	} else if (message_out) {
-		if (((message_out != 1) &&
-		     ((message_out < 0x20) || (message_out & 0x80))))
-			esp->msgout_len = 1;
-		esp->cur_msgout[0] = message_out;
-		esp_cmd(esp, ESP_CMD_SATN);
-		esp_advance_phase(SCptr, in_the_dark);
-		esp->msgin_len = 0;
-	}
-	esp->sreg = sbus_readb(esp->eregs + ESP_STATUS);
-	esp->sreg &= ~(ESP_STAT_INTR);
-	if ((esp->sreg & (ESP_STAT_PMSG|ESP_STAT_PCD)) == (ESP_STAT_PMSG|ESP_STAT_PCD))
-		esp_cmd(esp, ESP_CMD_MOK);
-	if ((SCptr->SCp.sent_command == in_msgindone) &&
-	    (SCptr->SCp.phase == in_freeing))
-		return esp_do_freebus(esp);
-	return do_intr_end;
-}
-
-static int esp_do_cmdbegin(struct esp *esp)
-{
-	struct scsi_cmnd *SCptr = esp->current_SC;
-
-	esp_advance_phase(SCptr, in_cmdend);
-	if (esp->erev == fashme) {
-		u32 tmp = sbus_readl(esp->dregs + DMA_CSR);
-		int i;
-
-		for (i = 0; i < esp->esp_scmdleft; i++)
-			esp->esp_command[i] = *esp->esp_scmdp++;
-		esp->esp_scmdleft = 0;
-		esp_cmd(esp, ESP_CMD_FLUSH);
-		esp_setcount(esp->eregs, i, 1);
-		esp_cmd(esp, (ESP_CMD_DMA | ESP_CMD_TI));
-		tmp |= (DMA_SCSI_DISAB | DMA_ENABLE);
-		tmp &= ~(DMA_ST_WRITE);
-		sbus_writel(i, esp->dregs + DMA_COUNT);
-		sbus_writel(esp->esp_command_dvma, esp->dregs + DMA_ADDR);
-		sbus_writel(tmp, esp->dregs + DMA_CSR);
-	} else {
-		u8 tmp;
-
-		esp_cmd(esp, ESP_CMD_FLUSH);
-		tmp = *esp->esp_scmdp++;
-		esp->esp_scmdleft--;
-		sbus_writeb(tmp, esp->eregs + ESP_FDATA);
-		esp_cmd(esp, ESP_CMD_TI);
-	}
-	return do_intr_end;
-}
-
-static int esp_do_cmddone(struct esp *esp)
-{
-	if (esp->erev == fashme)
-		dma_invalidate(esp);
-	else
-		esp_cmd(esp, ESP_CMD_NULL);
-
-	if (esp->ireg & ESP_INTR_BSERV) {
-		esp_advance_phase(esp->current_SC, in_the_dark);
-		return esp_do_phase_determine(esp);
-	}
-
-	ESPLOG(("esp%d: in do_cmddone() but didn't get BSERV interrupt.\n",
-		esp->esp_id));
-	return do_reset_bus;
-}
-
-static int esp_do_msgout(struct esp *esp)
-{
-	esp_cmd(esp, ESP_CMD_FLUSH);
-	switch (esp->msgout_len) {
-	case 1:
-		if (esp->erev == fashme)
-			hme_fifo_push(esp, &esp->cur_msgout[0], 1);
-		else
-			sbus_writeb(esp->cur_msgout[0], esp->eregs + ESP_FDATA);
-
-		esp_cmd(esp, ESP_CMD_TI);
-		break;
-
-	case 2:
-		esp->esp_command[0] = esp->cur_msgout[0];
-		esp->esp_command[1] = esp->cur_msgout[1];
-
-		if (esp->erev == fashme) {
-			hme_fifo_push(esp, &esp->cur_msgout[0], 2);
-			esp_cmd(esp, ESP_CMD_TI);
-		} else {
-			dma_setup(esp, esp->esp_command_dvma, 2, 0);
-			esp_setcount(esp->eregs, 2, 0);
-			esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI);
-		}
-		break;
-
-	case 4:
-		esp->esp_command[0] = esp->cur_msgout[0];
-		esp->esp_command[1] = esp->cur_msgout[1];
-		esp->esp_command[2] = esp->cur_msgout[2];
-		esp->esp_command[3] = esp->cur_msgout[3];
-		esp->snip = 1;
-
-		if (esp->erev == fashme) {
-			hme_fifo_push(esp, &esp->cur_msgout[0], 4);
-			esp_cmd(esp, ESP_CMD_TI);
-		} else {
-			dma_setup(esp, esp->esp_command_dvma, 4, 0);
-			esp_setcount(esp->eregs, 4, 0);
-			esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI);
-		}
-		break;
-
-	case 5:
-		esp->esp_command[0] = esp->cur_msgout[0];
-		esp->esp_command[1] = esp->cur_msgout[1];
-		esp->esp_command[2] = esp->cur_msgout[2];
-		esp->esp_command[3] = esp->cur_msgout[3];
-		esp->esp_command[4] = esp->cur_msgout[4];
-		esp->snip = 1;
-
-		if (esp->erev == fashme) {
-			hme_fifo_push(esp, &esp->cur_msgout[0], 5);
-			esp_cmd(esp, ESP_CMD_TI);
-		} else {
-			dma_setup(esp, esp->esp_command_dvma, 5, 0);
-			esp_setcount(esp->eregs, 5, 0);
-			esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI);
-		}
-		break;
-
-	default:
-		/* whoops */
-		ESPMISC(("bogus msgout sending NOP\n"));
-		esp->cur_msgout[0] = NOP;
-
-		if (esp->erev == fashme) {
-			hme_fifo_push(esp, &esp->cur_msgout[0], 1);
-		} else {
-			sbus_writeb(esp->cur_msgout[0], esp->eregs + ESP_FDATA);
-		}
-
-		esp->msgout_len = 1;
-		esp_cmd(esp, ESP_CMD_TI);
-		break;
-	};
-
-	esp_advance_phase(esp->current_SC, in_msgoutdone);
-	return do_intr_end;
-}
-
-static int esp_do_msgoutdone(struct esp *esp)
-{
-	if (esp->msgout_len > 1) {
-		/* XXX HME/FAS ATN deassert workaround required,
-		 * XXX no DMA flushing, only possible ESP_CMD_FLUSH
-		 * XXX to kill the fifo.
-		 */
-		if (esp->erev != fashme) {
-			u32 tmp;
-
-			while ((tmp = sbus_readl(esp->dregs + DMA_CSR)) & DMA_PEND_READ)
-				udelay(1);
-			tmp &= ~DMA_ENABLE;
-			sbus_writel(tmp, esp->dregs + DMA_CSR);
-			dma_invalidate(esp);
-		} else {
-			esp_cmd(esp, ESP_CMD_FLUSH);
-		}
-	}
-	if (!(esp->ireg & ESP_INTR_DC)) {
-		if (esp->erev != fashme)
-			esp_cmd(esp, ESP_CMD_NULL);
-		switch (esp->sreg & ESP_STAT_PMASK) {
-		case ESP_MOP:
-			/* whoops, parity error */
-			ESPLOG(("esp%d: still in msgout, parity error assumed\n",
-				esp->esp_id));
-			if (esp->msgout_len > 1)
-				esp_cmd(esp, ESP_CMD_SATN);
-			esp_advance_phase(esp->current_SC, in_msgout);
-			return do_work_bus;
-
-		case ESP_DIP:
-			break;
-
-		default:
-			/* Happy Meal fifo is touchy... */
-			if ((esp->erev != fashme) &&
-			    !fcount(esp) &&
-			    !(((struct esp_device *)esp->current_SC->device->hostdata)->sync_max_offset))
-				esp_cmd(esp, ESP_CMD_FLUSH);
-			break;
-
-		};
-	} else {
-		ESPLOG(("esp%d: disconnect, resetting bus\n", esp->esp_id));
-		return do_reset_bus;
-	}
-
-	/* If we sent out a synchronous negotiation message, update
-	 * our state.
-	 */
-	if (esp->cur_msgout[2] == EXTENDED_MESSAGE &&
-	    esp->cur_msgout[4] == EXTENDED_SDTR) {
-		esp->snip = 1; /* anal retentiveness... */
-	}
-
-	esp->prevmsgout = esp->cur_msgout[0];
-	esp->msgout_len = 0;
-	esp_advance_phase(esp->current_SC, in_the_dark);
-	return esp_do_phase_determine(esp);
-}
-
-static int esp_bus_unexpected(struct esp *esp)
-{
-	ESPLOG(("esp%d: command in weird state %2x\n",
-		esp->esp_id, esp->current_SC->SCp.phase));
-	return do_reset_bus;
-}
-
-static espfunc_t bus_vector[] = {
-	esp_do_data_finale,
-	esp_do_data_finale,
-	esp_bus_unexpected,
-	esp_do_msgin,
-	esp_do_msgincont,
-	esp_do_msgindone,
-	esp_do_msgout,
-	esp_do_msgoutdone,
-	esp_do_cmdbegin,
-	esp_do_cmddone,
-	esp_do_status,
-	esp_do_freebus,
-	esp_do_phase_determine,
-	esp_bus_unexpected,
-	esp_bus_unexpected,
-	esp_bus_unexpected,
-};
-
-/* This is the second tier in our dual-level SCSI state machine. */
-static int esp_work_bus(struct esp *esp)
-{
-	struct scsi_cmnd *SCptr = esp->current_SC;
-	unsigned int phase;
-
-	ESPBUS(("esp_work_bus: "));
-	if (!SCptr) {
-		ESPBUS(("reconnect\n"));
-		return esp_do_reconnect(esp);
-	}
-	phase = SCptr->SCp.phase;
-	if ((phase & 0xf0) == in_phases_mask)
-		return bus_vector[(phase & 0x0f)](esp);
-	else if ((phase & 0xf0) == in_slct_mask)
-		return esp_select_complete(esp);
-	else
-		return esp_bus_unexpected(esp);
-}
-
-static espfunc_t isvc_vector[] = {
-	NULL,
-	esp_do_phase_determine,
-	esp_do_resetbus,
-	esp_finish_reset,
-	esp_work_bus
-};
-
-/* Main interrupt handler for an esp adapter. */
-static void esp_handle(struct esp *esp)
-{
-	struct scsi_cmnd *SCptr;
-	int what_next = do_intr_end;
-
-	SCptr = esp->current_SC;
-
-	/* Check for errors. */
-	esp->sreg = sbus_readb(esp->eregs + ESP_STATUS);
-	esp->sreg &= (~ESP_STAT_INTR);
-	if (esp->erev == fashme) {
-		esp->sreg2 = sbus_readb(esp->eregs + ESP_STATUS2);
-		esp->seqreg = (sbus_readb(esp->eregs + ESP_SSTEP) & ESP_STEP_VBITS);
-	}
-
-	if (esp->sreg & (ESP_STAT_SPAM)) {
-		/* Gross error, could be due to one of:
-		 *
-		 * - top of fifo overwritten, could be because
-		 *   we tried to do a synchronous transfer with
-		 *   an offset greater than ESP fifo size
-		 *
-		 * - top of command register overwritten
-		 *
-		 * - DMA setup to go in one direction, SCSI
-		 *   bus points in the other, whoops
-		 *
-		 * - weird phase change during asynchronous
-		 *   data phase while we are initiator
-		 */
-		ESPLOG(("esp%d: Gross error sreg=%2x\n", esp->esp_id, esp->sreg));
-
-		/* If a command is live on the bus we cannot safely
-		 * reset the bus, so we'll just let the pieces fall
-		 * where they may.  Here we are hoping that the
-		 * target will be able to cleanly go away soon
-		 * so we can safely reset things.
-		 */
-		if (!SCptr) {
-			ESPLOG(("esp%d: No current cmd during gross error, "
-				"resetting bus\n", esp->esp_id));
-			what_next = do_reset_bus;
-			goto state_machine;
-		}
-	}
-
-	if (sbus_readl(esp->dregs + DMA_CSR) & DMA_HNDL_ERROR) {
-		/* A DMA gate array error.  Here we must
-		 * be seeing one of two things.  Either the
-		 * virtual to physical address translation
-		 * on the SBUS could not occur, else the
-		 * translation it did get pointed to a bogus
-		 * page.  Ho hum...
-		 */
-		ESPLOG(("esp%d: DMA error %08x\n", esp->esp_id,
-			sbus_readl(esp->dregs + DMA_CSR)));
-
-		/* DMA gate array itself must be reset to clear the
-		 * error condition.
-		 */
-		esp_reset_dma(esp);
-
-		what_next = do_reset_bus;
-		goto state_machine;
-	}
-
-	esp->ireg = sbus_readb(esp->eregs + ESP_INTRPT);   /* Unlatch intr reg */
-
-	if (esp->erev == fashme) {
-		/* This chip is really losing. */
-		ESPHME(("HME["));
-
-		ESPHME(("sreg2=%02x,", esp->sreg2));
-		/* Must latch fifo before reading the interrupt
-		 * register else garbage ends up in the FIFO
-		 * which confuses the driver utterly.
-		 */
-		if (!(esp->sreg2 & ESP_STAT2_FEMPTY) ||
-		    (esp->sreg2 & ESP_STAT2_F1BYTE)) {
-			ESPHME(("fifo_workaround]"));
-			hme_fifo_read(esp);
-		} else {
-			ESPHME(("no_fifo_workaround]"));
-		}
-	}
-
-	/* No current cmd is only valid at this point when there are
-	 * commands off the bus or we are trying a reset.
-	 */
-	if (!SCptr && !esp->disconnected_SC && !(esp->ireg & ESP_INTR_SR)) {
-		/* Panic is safe, since current_SC is null. */
-		ESPLOG(("esp%d: no command in esp_handle()\n", esp->esp_id));
-		panic("esp_handle: current_SC == penguin within interrupt!");
-	}
-
-	if (esp->ireg & (ESP_INTR_IC)) {
-		/* Illegal command fed to ESP.  Outside of obvious
-		 * software bugs that could cause this, there is
-		 * a condition with esp100 where we can confuse the
-		 * ESP into an erroneous illegal command interrupt
-		 * because it does not scrape the FIFO properly
-		 * for reselection.  See esp100_reconnect_hwbug()
-		 * to see how we try very hard to avoid this.
-		 */
-		ESPLOG(("esp%d: invalid command\n", esp->esp_id));
-
-		esp_dump_state(esp);
-
-		if (SCptr != NULL) {
-			/* Devices with very buggy firmware can drop BSY
-			 * during a scatter list interrupt when using sync
-			 * mode transfers.  We continue the transfer as
-			 * expected, the target drops the bus, the ESP
-			 * gets confused, and we get a illegal command
-			 * interrupt because the bus is in the disconnected
-			 * state now and ESP_CMD_TI is only allowed when
-			 * a nexus is alive on the bus.
-			 */
-			ESPLOG(("esp%d: Forcing async and disabling disconnect for "
-				"target %d\n", esp->esp_id, SCptr->device->id));
-			SCptr->device->borken = 1; /* foo on you */
-		}
-
-		what_next = do_reset_bus;
-	} else if (!(esp->ireg & ~(ESP_INTR_FDONE | ESP_INTR_BSERV | ESP_INTR_DC))) {
-		if (SCptr) {
-			unsigned int phase = SCptr->SCp.phase;
-
-			if (phase & in_phases_mask) {
-				what_next = esp_work_bus(esp);
-			} else if (phase & in_slct_mask) {
-				what_next = esp_select_complete(esp);
-			} else {
-				ESPLOG(("esp%d: interrupt for no good reason...\n",
-					esp->esp_id));
-				what_next = do_intr_end;
-			}
-		} else {
-			ESPLOG(("esp%d: BSERV or FDONE or DC while SCptr==NULL\n",
-				esp->esp_id));
-			what_next = do_reset_bus;
-		}
-	} else if (esp->ireg & ESP_INTR_SR) {
-		ESPLOG(("esp%d: SCSI bus reset interrupt\n", esp->esp_id));
-		what_next = do_reset_complete;
-	} else if (esp->ireg & (ESP_INTR_S | ESP_INTR_SATN)) {
-		ESPLOG(("esp%d: AIEEE we have been selected by another initiator!\n",
-			esp->esp_id));
-		what_next = do_reset_bus;
-	} else if (esp->ireg & ESP_INTR_RSEL) {
-		if (SCptr == NULL) {
-			/* This is ok. */
-			what_next = esp_do_reconnect(esp);
-		} else if (SCptr->SCp.phase & in_slct_mask) {
-			/* Only selection code knows how to clean
-			 * up properly.
-			 */
-			ESPDISC(("Reselected during selection attempt\n"));
-			what_next = esp_select_complete(esp);
-		} else {
-			ESPLOG(("esp%d: Reselected while bus is busy\n",
-				esp->esp_id));
-			what_next = do_reset_bus;
-		}
-	}
-
-	/* This is tier-one in our dual level SCSI state machine. */
-state_machine:
-	while (what_next != do_intr_end) {
-		if (what_next >= do_phase_determine &&
-		    what_next < do_intr_end) {
-			what_next = isvc_vector[what_next](esp);
-		} else {
-			/* state is completely lost ;-( */
-			ESPLOG(("esp%d: interrupt engine loses state, resetting bus\n",
-				esp->esp_id));
-			what_next = do_reset_bus;
-		}
-	}
-}
-
-/* Service only the ESP described by dev_id. */
-static irqreturn_t esp_intr(int irq, void *dev_id)
-{
-	struct esp *esp = dev_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(esp->ehost->host_lock, flags);
-	if (ESP_IRQ_P(esp->dregs)) {
-		ESP_INTSOFF(esp->dregs);
-
-		ESPIRQ(("I[%d:%d](", smp_processor_id(), esp->esp_id));
-		esp_handle(esp);
-		ESPIRQ((")"));
-
-		ESP_INTSON(esp->dregs);
-	}
-	spin_unlock_irqrestore(esp->ehost->host_lock, flags);
-
-	return IRQ_HANDLED;
-}
-
-static int esp_slave_alloc(struct scsi_device *SDptr)
-{
-	struct esp_device *esp_dev =
-		kmalloc(sizeof(struct esp_device), GFP_ATOMIC);
-
-	if (!esp_dev)
-		return -ENOMEM;
-	memset(esp_dev, 0, sizeof(struct esp_device));
-	SDptr->hostdata = esp_dev;
-	return 0;
-}
-
-static void esp_slave_destroy(struct scsi_device *SDptr)
-{
-	struct esp *esp = (struct esp *) SDptr->host->hostdata;
-
-	esp->targets_present &= ~(1 << SDptr->id);
-	kfree(SDptr->hostdata);
-	SDptr->hostdata = NULL;
-}
-
-static struct scsi_host_template esp_template = {
-	.module			= THIS_MODULE,
-	.name			= "esp",
-	.info			= esp_info,
-	.slave_alloc		= esp_slave_alloc,
-	.slave_destroy		= esp_slave_destroy,
-	.queuecommand		= esp_queue,
-	.eh_abort_handler	= esp_abort,
-	.eh_bus_reset_handler	= esp_reset,
-	.can_queue		= 7,
-	.this_id		= 7,
-	.sg_tablesize		= SG_ALL,
-	.cmd_per_lun		= 1,
-	.use_clustering		= ENABLE_CLUSTERING,
-	.proc_name		= "esp",
-	.proc_info		= esp_proc_info,
-};
-
-#ifndef CONFIG_SUN4
-static struct of_device_id esp_match[] = {
-	{
-		.name = "SUNW,esp",
-		.data = &esp_template,
-	},
-	{
-		.name = "SUNW,fas",
-		.data = &esp_template,
-	},
-	{
-		.name = "esp",
-		.data = &esp_template,
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, esp_match);
-
-static struct of_platform_driver esp_sbus_driver = {
-	.name		= "esp",
-	.match_table	= esp_match,
-	.probe		= esp_sbus_probe,
-	.remove		= __devexit_p(esp_sbus_remove),
-};
-#endif
-
-static int __init esp_init(void)
-{
-#ifdef CONFIG_SUN4
-	return esp_sun4_probe(&esp_template);
-#else
-	return of_register_driver(&esp_sbus_driver, &sbus_bus_type);
-#endif
-}
-
-static void __exit esp_exit(void)
-{
-#ifdef CONFIG_SUN4
-	esp_sun4_remove();
-#else
-	of_unregister_driver(&esp_sbus_driver);
-#endif
-}
-
-MODULE_DESCRIPTION("ESP Sun SCSI driver");
-MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-module_init(esp_init);
-module_exit(esp_exit);
diff --git a/drivers/scsi/esp.h b/drivers/scsi/esp.h
deleted file mode 100644
index a98cda9121f..00000000000
--- a/drivers/scsi/esp.h
+++ /dev/null
@@ -1,406 +0,0 @@
-/* $Id: esp.h,v 1.29 2001/12/11 04:55:47 davem Exp $
- * esp.h:  Defines and structures for the Sparc ESP (Enhanced SCSI
- *         Processor) driver under Linux.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_ESP_H
-#define _SPARC_ESP_H
-
-/* For dvma controller register definitions. */
-#include <asm/dma.h>
-
-/* The ESP SCSI controllers have their register sets in three
- * "classes":
- *
- * 1) Registers which are both read and write.
- * 2) Registers which are read only.
- * 3) Registers which are write only.
- *
- * Yet, they all live within the same IO space.
- */
-
-/* All the ESP registers are one byte each and are accessed longwords
- * apart with a big-endian ordering to the bytes.
- */
-					/* Access    Description              Offset */
-#define ESP_TCLOW	0x00UL		/* rw  Low bits of the transfer count 0x00   */
-#define ESP_TCMED	0x04UL		/* rw  Mid bits of the transfer count 0x04   */
-#define ESP_FDATA	0x08UL		/* rw  FIFO data bits                 0x08   */
-#define ESP_CMD		0x0cUL		/* rw  SCSI command bits              0x0c   */
-#define ESP_STATUS	0x10UL		/* ro  ESP status register            0x10   */
-#define ESP_BUSID	ESP_STATUS	/* wo  Bus ID for select/reselect     0x10   */
-#define ESP_INTRPT	0x14UL		/* ro  Kind of interrupt              0x14   */
-#define ESP_TIMEO	ESP_INTRPT	/* wo  Timeout value for select/resel 0x14   */
-#define ESP_SSTEP	0x18UL		/* ro  Sequence step register         0x18   */
-#define ESP_STP		ESP_SSTEP	/* wo  Transfer period per sync       0x18   */
-#define ESP_FFLAGS	0x1cUL		/* ro  Bits of current FIFO info      0x1c   */
-#define ESP_SOFF	ESP_FFLAGS	/* wo  Sync offset                    0x1c   */
-#define ESP_CFG1	0x20UL		/* rw  First configuration register   0x20   */
-#define ESP_CFACT	0x24UL		/* wo  Clock conversion factor        0x24   */
-#define ESP_STATUS2	ESP_CFACT	/* ro  HME status2 register           0x24   */
-#define ESP_CTEST	0x28UL		/* wo  Chip test register             0x28   */
-#define ESP_CFG2	0x2cUL		/* rw  Second configuration register  0x2c   */
-#define ESP_CFG3	0x30UL		/* rw  Third configuration register   0x30   */
-#define ESP_TCHI	0x38UL		/* rw  High bits of transfer count    0x38   */
-#define ESP_UID		ESP_TCHI	/* ro  Unique ID code                 0x38   */
-#define FAS_RLO		ESP_TCHI	/* rw  HME extended counter           0x38   */
-#define ESP_FGRND	0x3cUL		/* rw  Data base for fifo             0x3c   */
-#define FAS_RHI		ESP_FGRND	/* rw  HME extended counter           0x3c   */
-#define ESP_REG_SIZE	0x40UL
-
-/* Various revisions of the ESP board. */
-enum esp_rev {
-	esp100     = 0x00,  /* NCR53C90 - very broken */
-	esp100a    = 0x01,  /* NCR53C90A */
-	esp236     = 0x02,
-	fas236     = 0x03,
-	fas100a    = 0x04,
-	fast       = 0x05,
-	fashme     = 0x06,
-	espunknown = 0x07
-};
-
-/* We allocate one of these for each scsi device and attach it to
- * SDptr->hostdata for use in the driver
- */
-struct esp_device {
-  unsigned char sync_min_period;
-  unsigned char sync_max_offset;
-  unsigned sync:1;
-  unsigned wide:1;
-  unsigned disconnect:1;
-};
-
-struct scsi_cmnd;
-
-/* We get one of these for each ESP probed. */
-struct esp {
-	void __iomem		*eregs;		/* ESP controller registers */
-	void __iomem		*dregs;		/* DMA controller registers */
-	struct sbus_dma		*dma;		/* DMA controller sw state */
-	struct Scsi_Host	*ehost;		/* Backpointer to SCSI Host */
-	struct sbus_dev		*sdev;		/* Pointer to SBus entry */
-
-	/* ESP Configuration Registers */
-	u8			config1;	/* Copy of the 1st config register */
-	u8			config2;	/* Copy of the 2nd config register */
-	u8			config3[16];	/* Copy of the 3rd config register */
-
-	/* The current command we are sending to the ESP chip.  This esp_command
-	 * ptr needs to be mapped in DVMA area so we can send commands and read
-	 * from the ESP fifo without burning precious CPU cycles.  Programmed I/O
-	 * sucks when we have the DVMA to do it for us.  The ESP is stupid and will
-	 * only send out 6, 10, and 12 byte SCSI commands, others we need to send
-	 * one byte at a time.  esp_slowcmd being set says that we are doing one
-	 * of the command types ESP doesn't understand, esp_scmdp keeps track of
-	 * which byte we are sending, esp_scmdleft says how many bytes to go.
-	 */
-	volatile u8		*esp_command;    /* Location of command (CPU view)  */
-	__u32			esp_command_dvma;/* Location of command (DVMA view) */
-	unsigned char		esp_clen;	 /* Length of this command */
-	unsigned char		esp_slowcmd;
-	unsigned char		*esp_scmdp;
-	unsigned char		esp_scmdleft;
-
-	/* The following are used to determine the cause of an IRQ. Upon every
-	 * IRQ entry we synchronize these with the hardware registers.
-	 */
-	u8			ireg;		/* Copy of ESP interrupt register */
-	u8			sreg;		/* Copy of ESP status register */
-	u8			seqreg;		/* Copy of ESP sequence step register */
-	u8			sreg2;		/* Copy of HME status2 register */
-
-	/* To save register writes to the ESP, which can be expensive, we
-	 * keep track of the previous value that various registers had for
-	 * the last target we connected to.  If they are the same for the
-	 * current target, we skip the register writes as they are not needed.
-	 */
-	u8			prev_soff, prev_stp;
-	u8			prev_cfg3, __cache_pad;
-
-	/* We also keep a cache of the previous FAS/HME DMA CSR register value.  */
-	u32			prev_hme_dmacsr;
-
-	/* The HME is the biggest piece of shit I have ever seen. */
-	u8			hme_fifo_workaround_buffer[16 * 2];
-	u8			hme_fifo_workaround_count;
-
-	/* For each target we keep track of save/restore data
-	 * pointer information.  This needs to be updated majorly
-	 * when we add support for tagged queueing.  -DaveM
-	 */
-	struct esp_pointers {
-		char			*saved_ptr;
-		struct scatterlist	*saved_buffer;
-		int			saved_this_residual;
-		int			saved_buffers_residual;
-	} data_pointers[16] /*XXX [MAX_TAGS_PER_TARGET]*/;
-
-	/* Clock periods, frequencies, synchronization, etc. */
-	unsigned int		cfreq;		/* Clock frequency in HZ */
-	unsigned int		cfact;		/* Clock conversion factor */
-	unsigned int		raw_cfact;	/* Raw copy from probing */
-	unsigned int		ccycle;		/* One ESP clock cycle */
-	unsigned int		ctick;		/* One ESP clock time */
-	unsigned int		radelay;	/* FAST chip req/ack delay */
-	unsigned int		neg_defp;	/* Default negotiation period */
-	unsigned int		sync_defp;	/* Default sync transfer period */
-	unsigned int		max_period;	/* longest our period can be */
-	unsigned int		min_period;	/* shortest period we can withstand */
-
-	struct esp		*next;		/* Next ESP we probed or NULL */
-	char			prom_name[64];	/* Name of ESP device from prom */
-	int			prom_node;	/* Prom node where ESP found */
-	int			esp_id;		/* Unique per-ESP ID number */
-
-	/* For slow to medium speed input clock rates we shoot for 5mb/s,
-	 * but for high input clock rates we try to do 10mb/s although I
-	 * don't think a transfer can even run that fast with an ESP even
-	 * with DMA2 scatter gather pipelining.
-	 */
-#define SYNC_DEFP_SLOW            0x32   /* 5mb/s  */
-#define SYNC_DEFP_FAST            0x19   /* 10mb/s */
-
-	unsigned int		snip;		/* Sync. negotiation in progress */
-	unsigned int		wnip;		/* WIDE negotiation in progress */
-	unsigned int		targets_present;/* targets spoken to before */
-
-	int		current_transfer_size;	/* Set at beginning of data dma */
-
-	u8			espcmdlog[32];	/* Log of current esp cmds sent. */
-	u8			espcmdent;	/* Current entry in esp cmd log. */
-
-	/* Misc. info about this ESP */
-	enum esp_rev		erev;		/* ESP revision */
-	int			irq;		/* SBus IRQ for this ESP */
-	int			scsi_id;	/* Who am I as initiator? */
-	int			scsi_id_mask;	/* Bitmask of 'me'. */
-	int			diff;		/* Differential SCSI bus? */
-	int			bursts;		/* Burst sizes our DVMA supports */
-
-	/* Our command queues, only one cmd lives in the current_SC queue. */
-	struct scsi_cmnd	*issue_SC;	/* Commands to be issued */
-	struct scsi_cmnd	*current_SC;	/* Who is currently working the bus */
-	struct scsi_cmnd	*disconnected_SC;/* Commands disconnected from the bus */
-
-	/* Message goo */
-	u8			cur_msgout[16];
-	u8			cur_msgin[16];
-	u8			prevmsgout, prevmsgin;
-	u8			msgout_len, msgin_len;
-	u8			msgout_ctr, msgin_ctr;
-
-	/* States that we cannot keep in the per cmd structure because they
-	 * cannot be assosciated with any specific command.
-	 */
-	u8			resetting_bus;
-	wait_queue_head_t	reset_queue;
-};
-
-/* Bitfield meanings for the above registers. */
-
-/* ESP config reg 1, read-write, found on all ESP chips */
-#define ESP_CONFIG1_ID        0x07             /* My BUS ID bits */
-#define ESP_CONFIG1_CHTEST    0x08             /* Enable ESP chip tests */
-#define ESP_CONFIG1_PENABLE   0x10             /* Enable parity checks */
-#define ESP_CONFIG1_PARTEST   0x20             /* Parity test mode enabled? */
-#define ESP_CONFIG1_SRRDISAB  0x40             /* Disable SCSI reset reports */
-#define ESP_CONFIG1_SLCABLE   0x80             /* Enable slow cable mode */
-
-/* ESP config reg 2, read-write, found only on esp100a+esp200+esp236 chips */
-#define ESP_CONFIG2_DMAPARITY 0x01             /* enable DMA Parity (200,236) */
-#define ESP_CONFIG2_REGPARITY 0x02             /* enable reg Parity (200,236) */
-#define ESP_CONFIG2_BADPARITY 0x04             /* Bad parity target abort  */
-#define ESP_CONFIG2_SCSI2ENAB 0x08             /* Enable SCSI-2 features (tmode only) */
-#define ESP_CONFIG2_HI        0x10             /* High Impedance DREQ ???  */
-#define ESP_CONFIG2_HMEFENAB  0x10             /* HME features enable */
-#define ESP_CONFIG2_BCM       0x20             /* Enable byte-ctrl (236)   */
-#define ESP_CONFIG2_DISPINT   0x20             /* Disable pause irq (hme) */
-#define ESP_CONFIG2_FENAB     0x40             /* Enable features (fas100,esp216)      */
-#define ESP_CONFIG2_SPL       0x40             /* Enable status-phase latch (esp236)   */
-#define ESP_CONFIG2_MKDONE    0x40             /* HME magic feature */
-#define ESP_CONFIG2_HME32     0x80             /* HME 32 extended */
-#define ESP_CONFIG2_MAGIC     0xe0             /* Invalid bits... */
-
-/* ESP config register 3 read-write, found only esp236+fas236+fas100a+hme chips */
-#define ESP_CONFIG3_FCLOCK    0x01             /* FAST SCSI clock rate (esp100a/hme) */
-#define ESP_CONFIG3_TEM       0x01             /* Enable thresh-8 mode (esp/fas236)  */
-#define ESP_CONFIG3_FAST      0x02             /* Enable FAST SCSI     (esp100a/hme) */
-#define ESP_CONFIG3_ADMA      0x02             /* Enable alternate-dma (esp/fas236)  */
-#define ESP_CONFIG3_TENB      0x04             /* group2 SCSI2 support (esp100a/hme) */
-#define ESP_CONFIG3_SRB       0x04             /* Save residual byte   (esp/fas236)  */
-#define ESP_CONFIG3_TMS       0x08             /* Three-byte msg's ok  (esp100a/hme) */
-#define ESP_CONFIG3_FCLK      0x08             /* Fast SCSI clock rate (esp/fas236)  */
-#define ESP_CONFIG3_IDMSG     0x10             /* ID message checking  (esp100a/hme) */
-#define ESP_CONFIG3_FSCSI     0x10             /* Enable FAST SCSI     (esp/fas236)  */
-#define ESP_CONFIG3_GTM       0x20             /* group2 SCSI2 support (esp/fas236)  */
-#define ESP_CONFIG3_IDBIT3    0x20             /* Bit 3 of HME SCSI-ID (hme)         */
-#define ESP_CONFIG3_TBMS      0x40             /* Three-byte msg's ok  (esp/fas236)  */
-#define ESP_CONFIG3_EWIDE     0x40             /* Enable Wide-SCSI     (hme)         */
-#define ESP_CONFIG3_IMS       0x80             /* ID msg chk'ng        (esp/fas236)  */
-#define ESP_CONFIG3_OBPUSH    0x80             /* Push odd-byte to dma (hme)         */
-
-/* ESP command register read-write */
-/* Group 1 commands:  These may be sent at any point in time to the ESP
- *                    chip.  None of them can generate interrupts 'cept
- *                    the "SCSI bus reset" command if you have not disabled
- *                    SCSI reset interrupts in the config1 ESP register.
- */
-#define ESP_CMD_NULL          0x00             /* Null command, ie. a nop */
-#define ESP_CMD_FLUSH         0x01             /* FIFO Flush */
-#define ESP_CMD_RC            0x02             /* Chip reset */
-#define ESP_CMD_RS            0x03             /* SCSI bus reset */
-
-/* Group 2 commands:  ESP must be an initiator and connected to a target
- *                    for these commands to work.
- */
-#define ESP_CMD_TI            0x10             /* Transfer Information */
-#define ESP_CMD_ICCSEQ        0x11             /* Initiator cmd complete sequence */
-#define ESP_CMD_MOK           0x12             /* Message okie-dokie */
-#define ESP_CMD_TPAD          0x18             /* Transfer Pad */
-#define ESP_CMD_SATN          0x1a             /* Set ATN */
-#define ESP_CMD_RATN          0x1b             /* De-assert ATN */
-
-/* Group 3 commands:  ESP must be in the MSGOUT or MSGIN state and be connected
- *                    to a target as the initiator for these commands to work.
- */
-#define ESP_CMD_SMSG          0x20             /* Send message */
-#define ESP_CMD_SSTAT         0x21             /* Send status */
-#define ESP_CMD_SDATA         0x22             /* Send data */
-#define ESP_CMD_DSEQ          0x23             /* Discontinue Sequence */
-#define ESP_CMD_TSEQ          0x24             /* Terminate Sequence */
-#define ESP_CMD_TCCSEQ        0x25             /* Target cmd cmplt sequence */
-#define ESP_CMD_DCNCT         0x27             /* Disconnect */
-#define ESP_CMD_RMSG          0x28             /* Receive Message */
-#define ESP_CMD_RCMD          0x29             /* Receive Command */
-#define ESP_CMD_RDATA         0x2a             /* Receive Data */
-#define ESP_CMD_RCSEQ         0x2b             /* Receive cmd sequence */
-
-/* Group 4 commands:  The ESP must be in the disconnected state and must
- *                    not be connected to any targets as initiator for
- *                    these commands to work.
- */
-#define ESP_CMD_RSEL          0x40             /* Reselect */
-#define ESP_CMD_SEL           0x41             /* Select w/o ATN */
-#define ESP_CMD_SELA          0x42             /* Select w/ATN */
-#define ESP_CMD_SELAS         0x43             /* Select w/ATN & STOP */
-#define ESP_CMD_ESEL          0x44             /* Enable selection */
-#define ESP_CMD_DSEL          0x45             /* Disable selections */
-#define ESP_CMD_SA3           0x46             /* Select w/ATN3 */
-#define ESP_CMD_RSEL3         0x47             /* Reselect3 */
-
-/* This bit enables the ESP's DMA on the SBus */
-#define ESP_CMD_DMA           0x80             /* Do DMA? */
-
-
-/* ESP status register read-only */
-#define ESP_STAT_PIO          0x01             /* IO phase bit */
-#define ESP_STAT_PCD          0x02             /* CD phase bit */
-#define ESP_STAT_PMSG         0x04             /* MSG phase bit */
-#define ESP_STAT_PMASK        0x07             /* Mask of phase bits */
-#define ESP_STAT_TDONE        0x08             /* Transfer Completed */
-#define ESP_STAT_TCNT         0x10             /* Transfer Counter Is Zero */
-#define ESP_STAT_PERR         0x20             /* Parity error */
-#define ESP_STAT_SPAM         0x40             /* Real bad error */
-/* This indicates the 'interrupt pending' condition on esp236, it is a reserved
- * bit on other revs of the ESP.
- */
-#define ESP_STAT_INTR         0x80             /* Interrupt */
-
-/* HME only: status 2 register */
-#define ESP_STAT2_SCHBIT      0x01 /* Upper bits 3-7 of sstep enabled */
-#define ESP_STAT2_FFLAGS      0x02 /* The fifo flags are now latched */
-#define ESP_STAT2_XCNT        0x04 /* The transfer counter is latched */
-#define ESP_STAT2_CREGA       0x08 /* The command reg is active now */
-#define ESP_STAT2_WIDE        0x10 /* Interface on this adapter is wide */
-#define ESP_STAT2_F1BYTE      0x20 /* There is one byte at top of fifo */
-#define ESP_STAT2_FMSB        0x40 /* Next byte in fifo is most significant */
-#define ESP_STAT2_FEMPTY      0x80 /* FIFO is empty */
-
-/* The status register can be masked with ESP_STAT_PMASK and compared
- * with the following values to determine the current phase the ESP
- * (at least thinks it) is in.  For our purposes we also add our own
- * software 'done' bit for our phase management engine.
- */
-#define ESP_DOP   (0)                                       /* Data Out  */
-#define ESP_DIP   (ESP_STAT_PIO)                            /* Data In   */
-#define ESP_CMDP  (ESP_STAT_PCD)                            /* Command   */
-#define ESP_STATP (ESP_STAT_PCD|ESP_STAT_PIO)               /* Status    */
-#define ESP_MOP   (ESP_STAT_PMSG|ESP_STAT_PCD)              /* Message Out */
-#define ESP_MIP   (ESP_STAT_PMSG|ESP_STAT_PCD|ESP_STAT_PIO) /* Message In */
-
-/* ESP interrupt register read-only */
-#define ESP_INTR_S            0x01             /* Select w/o ATN */
-#define ESP_INTR_SATN         0x02             /* Select w/ATN */
-#define ESP_INTR_RSEL         0x04             /* Reselected */
-#define ESP_INTR_FDONE        0x08             /* Function done */
-#define ESP_INTR_BSERV        0x10             /* Bus service */
-#define ESP_INTR_DC           0x20             /* Disconnect */
-#define ESP_INTR_IC           0x40             /* Illegal command given */
-#define ESP_INTR_SR           0x80             /* SCSI bus reset detected */
-
-/* Interrupt status macros */
-#define ESP_SRESET_IRQ(esp)  ((esp)->intreg & (ESP_INTR_SR))
-#define ESP_ILLCMD_IRQ(esp)  ((esp)->intreg & (ESP_INTR_IC))
-#define ESP_SELECT_WITH_ATN_IRQ(esp)     ((esp)->intreg & (ESP_INTR_SATN))
-#define ESP_SELECT_WITHOUT_ATN_IRQ(esp)  ((esp)->intreg & (ESP_INTR_S))
-#define ESP_SELECTION_IRQ(esp)  ((ESP_SELECT_WITH_ATN_IRQ(esp)) ||         \
-				 (ESP_SELECT_WITHOUT_ATN_IRQ(esp)))
-#define ESP_RESELECTION_IRQ(esp)         ((esp)->intreg & (ESP_INTR_RSEL))
-
-/* ESP sequence step register read-only */
-#define ESP_STEP_VBITS        0x07             /* Valid bits */
-#define ESP_STEP_ASEL         0x00             /* Selection&Arbitrate cmplt */
-#define ESP_STEP_SID          0x01             /* One msg byte sent */
-#define ESP_STEP_NCMD         0x02             /* Was not in command phase */
-#define ESP_STEP_PPC          0x03             /* Early phase chg caused cmnd
-                                                * bytes to be lost
-                                                */
-#define ESP_STEP_FINI4        0x04             /* Command was sent ok */
-
-/* Ho hum, some ESP's set the step register to this as well... */
-#define ESP_STEP_FINI5        0x05
-#define ESP_STEP_FINI6        0x06
-#define ESP_STEP_FINI7        0x07
-
-/* ESP chip-test register read-write */
-#define ESP_TEST_TARG         0x01             /* Target test mode */
-#define ESP_TEST_INI          0x02             /* Initiator test mode */
-#define ESP_TEST_TS           0x04             /* Tristate test mode */
-
-/* ESP unique ID register read-only, found on fas236+fas100a only */
-#define ESP_UID_F100A         0x00             /* ESP FAS100A  */
-#define ESP_UID_F236          0x02             /* ESP FAS236   */
-#define ESP_UID_REV           0x07             /* ESP revision */
-#define ESP_UID_FAM           0xf8             /* ESP family   */
-
-/* ESP fifo flags register read-only */
-/* Note that the following implies a 16 byte FIFO on the ESP. */
-#define ESP_FF_FBYTES         0x1f             /* Num bytes in FIFO */
-#define ESP_FF_ONOTZERO       0x20             /* offset ctr not zero (esp100) */
-#define ESP_FF_SSTEP          0xe0             /* Sequence step */
-
-/* ESP clock conversion factor register write-only */
-#define ESP_CCF_F0            0x00             /* 35.01MHz - 40MHz */
-#define ESP_CCF_NEVER         0x01             /* Set it to this and die */
-#define ESP_CCF_F2            0x02             /* 10MHz */
-#define ESP_CCF_F3            0x03             /* 10.01MHz - 15MHz */
-#define ESP_CCF_F4            0x04             /* 15.01MHz - 20MHz */
-#define ESP_CCF_F5            0x05             /* 20.01MHz - 25MHz */
-#define ESP_CCF_F6            0x06             /* 25.01MHz - 30MHz */
-#define ESP_CCF_F7            0x07             /* 30.01MHz - 35MHz */
-
-/* HME only... */
-#define ESP_BUSID_RESELID     0x10
-#define ESP_BUSID_CTR32BIT    0x40
-
-#define ESP_BUS_TIMEOUT        275             /* In milli-seconds */
-#define ESP_TIMEO_CONST       8192
-#define ESP_NEG_DEFP(mhz, cfact) \
-        ((ESP_BUS_TIMEOUT * ((mhz) / 1000)) / (8192 * (cfact)))
-#define ESP_MHZ_TO_CYCLE(mhertz)  ((1000000000) / ((mhertz) / 1000))
-#define ESP_TICK(ccf, cycle)  ((7682 * (ccf) * (cycle) / 1000))
-
-#endif /* !(_SPARC_ESP_H) */
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
new file mode 100644
index 00000000000..3cd5bf723da
--- /dev/null
+++ b/drivers/scsi/esp_scsi.c
@@ -0,0 +1,2710 @@
+/* esp_scsi.c: ESP SCSI driver.
+ *
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/completion.h>
+#include <linux/kallsyms.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_transport_spi.h>
+
+#include "esp_scsi.h"
+
+#define DRV_MODULE_NAME		"esp"
+#define PFX DRV_MODULE_NAME	": "
+#define DRV_VERSION		"2.000"
+#define DRV_MODULE_RELDATE	"April 19, 2007"
+
+/* SCSI bus reset settle time in seconds.  */
+static int esp_bus_reset_settle = 3;
+
+static u32 esp_debug;
+#define ESP_DEBUG_INTR		0x00000001
+#define ESP_DEBUG_SCSICMD	0x00000002
+#define ESP_DEBUG_RESET		0x00000004
+#define ESP_DEBUG_MSGIN		0x00000008
+#define ESP_DEBUG_MSGOUT	0x00000010
+#define ESP_DEBUG_CMDDONE	0x00000020
+#define ESP_DEBUG_DISCONNECT	0x00000040
+#define ESP_DEBUG_DATASTART	0x00000080
+#define ESP_DEBUG_DATADONE	0x00000100
+#define ESP_DEBUG_RECONNECT	0x00000200
+#define ESP_DEBUG_AUTOSENSE	0x00000400
+
+#define esp_log_intr(f, a...) \
+do {	if (esp_debug & ESP_DEBUG_INTR) \
+		printk(f, ## a); \
+} while (0)
+
+#define esp_log_reset(f, a...) \
+do {	if (esp_debug & ESP_DEBUG_RESET) \
+		printk(f, ## a); \
+} while (0)
+
+#define esp_log_msgin(f, a...) \
+do {	if (esp_debug & ESP_DEBUG_MSGIN) \
+		printk(f, ## a); \
+} while (0)
+
+#define esp_log_msgout(f, a...) \
+do {	if (esp_debug & ESP_DEBUG_MSGOUT) \
+		printk(f, ## a); \
+} while (0)
+
+#define esp_log_cmddone(f, a...) \
+do {	if (esp_debug & ESP_DEBUG_CMDDONE) \
+		printk(f, ## a); \
+} while (0)
+
+#define esp_log_disconnect(f, a...) \
+do {	if (esp_debug & ESP_DEBUG_DISCONNECT) \
+		printk(f, ## a); \
+} while (0)
+
+#define esp_log_datastart(f, a...) \
+do {	if (esp_debug & ESP_DEBUG_DATASTART) \
+		printk(f, ## a); \
+} while (0)
+
+#define esp_log_datadone(f, a...) \
+do {	if (esp_debug & ESP_DEBUG_DATADONE) \
+		printk(f, ## a); \
+} while (0)
+
+#define esp_log_reconnect(f, a...) \
+do {	if (esp_debug & ESP_DEBUG_RECONNECT) \
+		printk(f, ## a); \
+} while (0)
+
+#define esp_log_autosense(f, a...) \
+do {	if (esp_debug & ESP_DEBUG_AUTOSENSE) \
+		printk(f, ## a); \
+} while (0)
+
+#define esp_read8(REG)		esp->ops->esp_read8(esp, REG)
+#define esp_write8(VAL,REG)	esp->ops->esp_write8(esp, VAL, REG)
+
+static void esp_log_fill_regs(struct esp *esp,
+			      struct esp_event_ent *p)
+{
+	p->sreg = esp->sreg;
+	p->seqreg = esp->seqreg;
+	p->sreg2 = esp->sreg2;
+	p->ireg = esp->ireg;
+	p->select_state = esp->select_state;
+	p->event = esp->event;
+}
+
+void scsi_esp_cmd(struct esp *esp, u8 val)
+{
+	struct esp_event_ent *p;
+	int idx = esp->esp_event_cur;
+
+	p = &esp->esp_event_log[idx];
+	p->type = ESP_EVENT_TYPE_CMD;
+	p->val = val;
+	esp_log_fill_regs(esp, p);
+
+	esp->esp_event_cur = (idx + 1) & (ESP_EVENT_LOG_SZ - 1);
+
+	esp_write8(val, ESP_CMD);
+}
+EXPORT_SYMBOL(scsi_esp_cmd);
+
+static void esp_event(struct esp *esp, u8 val)
+{
+	struct esp_event_ent *p;
+	int idx = esp->esp_event_cur;
+
+	p = &esp->esp_event_log[idx];
+	p->type = ESP_EVENT_TYPE_EVENT;
+	p->val = val;
+	esp_log_fill_regs(esp, p);
+
+	esp->esp_event_cur = (idx + 1) & (ESP_EVENT_LOG_SZ - 1);
+
+	esp->event = val;
+}
+
+static void esp_dump_cmd_log(struct esp *esp)
+{
+	int idx = esp->esp_event_cur;
+	int stop = idx;
+
+	printk(KERN_INFO PFX "esp%d: Dumping command log\n",
+	       esp->host->unique_id);
+	do {
+		struct esp_event_ent *p = &esp->esp_event_log[idx];
+
+		printk(KERN_INFO PFX "esp%d: ent[%d] %s ",
+		       esp->host->unique_id, idx,
+		       p->type == ESP_EVENT_TYPE_CMD ? "CMD" : "EVENT");
+
+		printk("val[%02x] sreg[%02x] seqreg[%02x] "
+		       "sreg2[%02x] ireg[%02x] ss[%02x] event[%02x]\n",
+		       p->val, p->sreg, p->seqreg,
+		       p->sreg2, p->ireg, p->select_state, p->event);
+
+		idx = (idx + 1) & (ESP_EVENT_LOG_SZ - 1);
+	} while (idx != stop);
+}
+
+static void esp_flush_fifo(struct esp *esp)
+{
+	scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+	if (esp->rev == ESP236) {
+		int lim = 1000;
+
+		while (esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES) {
+			if (--lim == 0) {
+				printk(KERN_ALERT PFX "esp%d: ESP_FF_BYTES "
+				       "will not clear!\n",
+				       esp->host->unique_id);
+				break;
+			}
+			udelay(1);
+		}
+	}
+}
+
+static void hme_read_fifo(struct esp *esp)
+{
+	int fcnt = esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES;
+	int idx = 0;
+
+	while (fcnt--) {
+		esp->fifo[idx++] = esp_read8(ESP_FDATA);
+		esp->fifo[idx++] = esp_read8(ESP_FDATA);
+	}
+	if (esp->sreg2 & ESP_STAT2_F1BYTE) {
+		esp_write8(0, ESP_FDATA);
+		esp->fifo[idx++] = esp_read8(ESP_FDATA);
+		scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+	}
+	esp->fifo_cnt = idx;
+}
+
+static void esp_set_all_config3(struct esp *esp, u8 val)
+{
+	int i;
+
+	for (i = 0; i < ESP_MAX_TARGET; i++)
+		esp->target[i].esp_config3 = val;
+}
+
+/* Reset the ESP chip, _not_ the SCSI bus. */
+static void esp_reset_esp(struct esp *esp)
+{
+	u8 family_code, version;
+
+	/* Now reset the ESP chip */
+	scsi_esp_cmd(esp, ESP_CMD_RC);
+	scsi_esp_cmd(esp, ESP_CMD_NULL | ESP_CMD_DMA);
+	scsi_esp_cmd(esp, ESP_CMD_NULL | ESP_CMD_DMA);
+
+	/* Reload the configuration registers */
+	esp_write8(esp->cfact, ESP_CFACT);
+
+	esp->prev_stp = 0;
+	esp_write8(esp->prev_stp, ESP_STP);
+
+	esp->prev_soff = 0;
+	esp_write8(esp->prev_soff, ESP_SOFF);
+
+	esp_write8(esp->neg_defp, ESP_TIMEO);
+
+	/* This is the only point at which it is reliable to read
+	 * the ID-code for a fast ESP chip variants.
+	 */
+	esp->max_period = ((35 * esp->ccycle) / 1000);
+	if (esp->rev == FAST) {
+		version = esp_read8(ESP_UID);
+		family_code = (version & 0xf8) >> 3;
+		if (family_code == 0x02)
+			esp->rev = FAS236;
+		else if (family_code == 0x0a)
+			esp->rev = FASHME; /* Version is usually '5'. */
+		else
+			esp->rev = FAS100A;
+		esp->min_period = ((4 * esp->ccycle) / 1000);
+	} else {
+		esp->min_period = ((5 * esp->ccycle) / 1000);
+	}
+	esp->max_period = (esp->max_period + 3)>>2;
+	esp->min_period = (esp->min_period + 3)>>2;
+
+	esp_write8(esp->config1, ESP_CFG1);
+	switch (esp->rev) {
+	case ESP100:
+		/* nothing to do */
+		break;
+
+	case ESP100A:
+		esp_write8(esp->config2, ESP_CFG2);
+		break;
+
+	case ESP236:
+		/* Slow 236 */
+		esp_write8(esp->config2, ESP_CFG2);
+		esp->prev_cfg3 = esp->target[0].esp_config3;
+		esp_write8(esp->prev_cfg3, ESP_CFG3);
+		break;
+
+	case FASHME:
+		esp->config2 |= (ESP_CONFIG2_HME32 | ESP_CONFIG2_HMEFENAB);
+		/* fallthrough... */
+
+	case FAS236:
+		/* Fast 236 or HME */
+		esp_write8(esp->config2, ESP_CFG2);
+		if (esp->rev == FASHME) {
+			u8 cfg3 = esp->target[0].esp_config3;
+
+			cfg3 |= ESP_CONFIG3_FCLOCK | ESP_CONFIG3_OBPUSH;
+			if (esp->scsi_id >= 8)
+				cfg3 |= ESP_CONFIG3_IDBIT3;
+			esp_set_all_config3(esp, cfg3);
+		} else {
+			u32 cfg3 = esp->target[0].esp_config3;
+
+			cfg3 |= ESP_CONFIG3_FCLK;
+			esp_set_all_config3(esp, cfg3);
+		}
+		esp->prev_cfg3 = esp->target[0].esp_config3;
+		esp_write8(esp->prev_cfg3, ESP_CFG3);
+		if (esp->rev == FASHME) {
+			esp->radelay = 80;
+		} else {
+			if (esp->flags & ESP_FLAG_DIFFERENTIAL)
+				esp->radelay = 0;
+			else
+				esp->radelay = 96;
+		}
+		break;
+
+	case FAS100A:
+		/* Fast 100a */
+		esp_write8(esp->config2, ESP_CFG2);
+		esp_set_all_config3(esp,
+				    (esp->target[0].esp_config3 |
+				     ESP_CONFIG3_FCLOCK));
+		esp->prev_cfg3 = esp->target[0].esp_config3;
+		esp_write8(esp->prev_cfg3, ESP_CFG3);
+		esp->radelay = 32;
+		break;
+
+	default:
+		break;
+	}
+
+	/* Eat any bitrot in the chip */
+	esp_read8(ESP_INTRPT);
+	udelay(100);
+}
+
+static void esp_map_dma(struct esp *esp, struct scsi_cmnd *cmd)
+{
+	struct esp_cmd_priv *spriv = ESP_CMD_PRIV(cmd);
+	struct scatterlist *sg = cmd->request_buffer;
+	int dir = cmd->sc_data_direction;
+	int total, i;
+
+	if (dir == DMA_NONE)
+		return;
+
+	BUG_ON(cmd->use_sg == 0);
+
+	spriv->u.num_sg = esp->ops->map_sg(esp, sg,
+					   cmd->use_sg, dir);
+	spriv->cur_residue = sg_dma_len(sg);
+	spriv->cur_sg = sg;
+
+	total = 0;
+	for (i = 0; i < spriv->u.num_sg; i++)
+		total += sg_dma_len(&sg[i]);
+	spriv->tot_residue = total;
+}
+
+static dma_addr_t esp_cur_dma_addr(struct esp_cmd_entry *ent,
+				   struct scsi_cmnd *cmd)
+{
+	struct esp_cmd_priv *p = ESP_CMD_PRIV(cmd);
+
+	if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) {
+		return ent->sense_dma +
+			(ent->sense_ptr - cmd->sense_buffer);
+	}
+
+	return sg_dma_address(p->cur_sg) +
+		(sg_dma_len(p->cur_sg) -
+		 p->cur_residue);
+}
+
+static unsigned int esp_cur_dma_len(struct esp_cmd_entry *ent,
+				    struct scsi_cmnd *cmd)
+{
+	struct esp_cmd_priv *p = ESP_CMD_PRIV(cmd);
+
+	if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) {
+		return SCSI_SENSE_BUFFERSIZE -
+			(ent->sense_ptr - cmd->sense_buffer);
+	}
+	return p->cur_residue;
+}
+
+static void esp_advance_dma(struct esp *esp, struct esp_cmd_entry *ent,
+			    struct scsi_cmnd *cmd, unsigned int len)
+{
+	struct esp_cmd_priv *p = ESP_CMD_PRIV(cmd);
+
+	if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) {
+		ent->sense_ptr += len;
+		return;
+	}
+
+	p->cur_residue -= len;
+	p->tot_residue -= len;
+	if (p->cur_residue < 0 || p->tot_residue < 0) {
+		printk(KERN_ERR PFX "esp%d: Data transfer overflow.\n",
+		       esp->host->unique_id);
+		printk(KERN_ERR PFX "esp%d: cur_residue[%d] tot_residue[%d] "
+		       "len[%u]\n",
+		       esp->host->unique_id,
+		       p->cur_residue, p->tot_residue, len);
+		p->cur_residue = 0;
+		p->tot_residue = 0;
+	}
+	if (!p->cur_residue && p->tot_residue) {
+		p->cur_sg++;
+		p->cur_residue = sg_dma_len(p->cur_sg);
+	}
+}
+
+static void esp_unmap_dma(struct esp *esp, struct scsi_cmnd *cmd)
+{
+	struct esp_cmd_priv *spriv = ESP_CMD_PRIV(cmd);
+	int dir = cmd->sc_data_direction;
+
+	if (dir == DMA_NONE)
+		return;
+
+	esp->ops->unmap_sg(esp, cmd->request_buffer,
+			   spriv->u.num_sg, dir);
+}
+
+static void esp_save_pointers(struct esp *esp, struct esp_cmd_entry *ent)
+{
+	struct scsi_cmnd *cmd = ent->cmd;
+	struct esp_cmd_priv *spriv = ESP_CMD_PRIV(cmd);
+
+	if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) {
+		ent->saved_sense_ptr = ent->sense_ptr;
+		return;
+	}
+	ent->saved_cur_residue = spriv->cur_residue;
+	ent->saved_cur_sg = spriv->cur_sg;
+	ent->saved_tot_residue = spriv->tot_residue;
+}
+
+static void esp_restore_pointers(struct esp *esp, struct esp_cmd_entry *ent)
+{
+	struct scsi_cmnd *cmd = ent->cmd;
+	struct esp_cmd_priv *spriv = ESP_CMD_PRIV(cmd);
+
+	if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) {
+		ent->sense_ptr = ent->saved_sense_ptr;
+		return;
+	}
+	spriv->cur_residue = ent->saved_cur_residue;
+	spriv->cur_sg = ent->saved_cur_sg;
+	spriv->tot_residue = ent->saved_tot_residue;
+}
+
+static void esp_check_command_len(struct esp *esp, struct scsi_cmnd *cmd)
+{
+	if (cmd->cmd_len == 6 ||
+	    cmd->cmd_len == 10 ||
+	    cmd->cmd_len == 12) {
+		esp->flags &= ~ESP_FLAG_DOING_SLOWCMD;
+	} else {
+		esp->flags |= ESP_FLAG_DOING_SLOWCMD;
+	}
+}
+
+static void esp_write_tgt_config3(struct esp *esp, int tgt)
+{
+	if (esp->rev > ESP100A) {
+		u8 val = esp->target[tgt].esp_config3;
+
+		if (val != esp->prev_cfg3) {
+			esp->prev_cfg3 = val;
+			esp_write8(val, ESP_CFG3);
+		}
+	}
+}
+
+static void esp_write_tgt_sync(struct esp *esp, int tgt)
+{
+	u8 off = esp->target[tgt].esp_offset;
+	u8 per = esp->target[tgt].esp_period;
+
+	if (off != esp->prev_soff) {
+		esp->prev_soff = off;
+		esp_write8(off, ESP_SOFF);
+	}
+	if (per != esp->prev_stp) {
+		esp->prev_stp = per;
+		esp_write8(per, ESP_STP);
+	}
+}
+
+static u32 esp_dma_length_limit(struct esp *esp, u32 dma_addr, u32 dma_len)
+{
+	if (esp->rev == FASHME) {
+		/* Arbitrary segment boundaries, 24-bit counts.  */
+		if (dma_len > (1U << 24))
+			dma_len = (1U << 24);
+	} else {
+		u32 base, end;
+
+		/* ESP chip limits other variants by 16-bits of transfer
+		 * count.  Actually on FAS100A and FAS236 we could get
+		 * 24-bits of transfer count by enabling ESP_CONFIG2_FENAB
+		 * in the ESP_CFG2 register but that causes other unwanted
+		 * changes so we don't use it currently.
+		 */
+		if (dma_len > (1U << 16))
+			dma_len = (1U << 16);
+
+		/* All of the DMA variants hooked up to these chips
+		 * cannot handle crossing a 24-bit address boundary.
+		 */
+		base = dma_addr & ((1U << 24) - 1U);
+		end = base + dma_len;
+		if (end > (1U << 24))
+			end = (1U <<24);
+		dma_len = end - base;
+	}
+	return dma_len;
+}
+
+static int esp_need_to_nego_wide(struct esp_target_data *tp)
+{
+	struct scsi_target *target = tp->starget;
+
+	return spi_width(target) != tp->nego_goal_width;
+}
+
+static int esp_need_to_nego_sync(struct esp_target_data *tp)
+{
+	struct scsi_target *target = tp->starget;
+
+	/* When offset is zero, period is "don't care".  */
+	if (!spi_offset(target) && !tp->nego_goal_offset)
+		return 0;
+
+	if (spi_offset(target) == tp->nego_goal_offset &&
+	    spi_period(target) == tp->nego_goal_period)
+		return 0;
+
+	return 1;
+}
+
+static int esp_alloc_lun_tag(struct esp_cmd_entry *ent,
+			     struct esp_lun_data *lp)
+{
+	if (!ent->tag[0]) {
+		/* Non-tagged, slot already taken?  */
+		if (lp->non_tagged_cmd)
+			return -EBUSY;
+
+		if (lp->hold) {
+			/* We are being held by active tagged
+			 * commands.
+			 */
+			if (lp->num_tagged)
+				return -EBUSY;
+
+			/* Tagged commands completed, we can unplug
+			 * the queue and run this untagged command.
+			 */
+			lp->hold = 0;
+		} else if (lp->num_tagged) {
+			/* Plug the queue until num_tagged decreases
+			 * to zero in esp_free_lun_tag.
+			 */
+			lp->hold = 1;
+			return -EBUSY;
+		}
+
+		lp->non_tagged_cmd = ent;
+		return 0;
+	} else {
+		/* Tagged command, see if blocked by a
+		 * non-tagged one.
+		 */
+		if (lp->non_tagged_cmd || lp->hold)
+			return -EBUSY;
+	}
+
+	BUG_ON(lp->tagged_cmds[ent->tag[1]]);
+
+	lp->tagged_cmds[ent->tag[1]] = ent;
+	lp->num_tagged++;
+
+	return 0;
+}
+
+static void esp_free_lun_tag(struct esp_cmd_entry *ent,
+			     struct esp_lun_data *lp)
+{
+	if (ent->tag[0]) {
+		BUG_ON(lp->tagged_cmds[ent->tag[1]] != ent);
+		lp->tagged_cmds[ent->tag[1]] = NULL;
+		lp->num_tagged--;
+	} else {
+		BUG_ON(lp->non_tagged_cmd != ent);
+		lp->non_tagged_cmd = NULL;
+	}
+}
+
+/* When a contingent allegiance conditon is created, we force feed a
+ * REQUEST_SENSE command to the device to fetch the sense data.  I
+ * tried many other schemes, relying on the scsi error handling layer
+ * to send out the REQUEST_SENSE automatically, but this was difficult
+ * to get right especially in the presence of applications like smartd
+ * which use SG_IO to send out their own REQUEST_SENSE commands.
+ */
+static void esp_autosense(struct esp *esp, struct esp_cmd_entry *ent)
+{
+	struct scsi_cmnd *cmd = ent->cmd;
+	struct scsi_device *dev = cmd->device;
+	int tgt, lun;
+	u8 *p, val;
+
+	tgt = dev->id;
+	lun = dev->lun;
+
+
+	if (!ent->sense_ptr) {
+		esp_log_autosense("esp%d: Doing auto-sense for "
+				  "tgt[%d] lun[%d]\n",
+				  esp->host->unique_id, tgt, lun);
+
+		ent->sense_ptr = cmd->sense_buffer;
+		ent->sense_dma = esp->ops->map_single(esp,
+						      ent->sense_ptr,
+						      SCSI_SENSE_BUFFERSIZE,
+						      DMA_FROM_DEVICE);
+	}
+	ent->saved_sense_ptr = ent->sense_ptr;
+
+	esp->active_cmd = ent;
+
+	p = esp->command_block;
+	esp->msg_out_len = 0;
+
+	*p++ = IDENTIFY(0, lun);
+	*p++ = REQUEST_SENSE;
+	*p++ = ((dev->scsi_level <= SCSI_2) ?
+		(lun << 5) : 0);
+	*p++ = 0;
+	*p++ = 0;
+	*p++ = SCSI_SENSE_BUFFERSIZE;
+	*p++ = 0;
+
+	esp->select_state = ESP_SELECT_BASIC;
+
+	val = tgt;
+	if (esp->rev == FASHME)
+		val |= ESP_BUSID_RESELID | ESP_BUSID_CTR32BIT;
+	esp_write8(val, ESP_BUSID);
+
+	esp_write_tgt_sync(esp, tgt);
+	esp_write_tgt_config3(esp, tgt);
+
+	val = (p - esp->command_block);
+
+	if (esp->rev == FASHME)
+		scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+	esp->ops->send_dma_cmd(esp, esp->command_block_dma,
+			       val, 16, 0, ESP_CMD_DMA | ESP_CMD_SELA);
+}
+
+static struct esp_cmd_entry *find_and_prep_issuable_command(struct esp *esp)
+{
+	struct esp_cmd_entry *ent;
+
+	list_for_each_entry(ent, &esp->queued_cmds, list) {
+		struct scsi_cmnd *cmd = ent->cmd;
+		struct scsi_device *dev = cmd->device;
+		struct esp_lun_data *lp = dev->hostdata;
+
+		if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) {
+			ent->tag[0] = 0;
+			ent->tag[1] = 0;
+			return ent;
+		}
+
+		if (!scsi_populate_tag_msg(cmd, &ent->tag[0])) {
+			ent->tag[0] = 0;
+			ent->tag[1] = 0;
+		}
+
+		if (esp_alloc_lun_tag(ent, lp) < 0)
+			continue;
+
+		return ent;
+	}
+
+	return NULL;
+}
+
+static void esp_maybe_execute_command(struct esp *esp)
+{
+	struct esp_target_data *tp;
+	struct esp_lun_data *lp;
+	struct scsi_device *dev;
+	struct scsi_cmnd *cmd;
+	struct esp_cmd_entry *ent;
+	int tgt, lun, i;
+	u32 val, start_cmd;
+	u8 *p;
+
+	if (esp->active_cmd ||
+	    (esp->flags & ESP_FLAG_RESETTING))
+		return;
+
+	ent = find_and_prep_issuable_command(esp);
+	if (!ent)
+		return;
+
+	if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) {
+		esp_autosense(esp, ent);
+		return;
+	}
+
+	cmd = ent->cmd;
+	dev = cmd->device;
+	tgt = dev->id;
+	lun = dev->lun;
+	tp = &esp->target[tgt];
+	lp = dev->hostdata;
+
+	list_del(&ent->list);
+	list_add(&ent->list, &esp->active_cmds);
+
+	esp->active_cmd = ent;
+
+	esp_map_dma(esp, cmd);
+	esp_save_pointers(esp, ent);
+
+	esp_check_command_len(esp, cmd);
+
+	p = esp->command_block;
+
+	esp->msg_out_len = 0;
+	if (tp->flags & ESP_TGT_CHECK_NEGO) {
+		/* Need to negotiate.  If the target is broken
+		 * go for synchronous transfers and non-wide.
+		 */
+		if (tp->flags & ESP_TGT_BROKEN) {
+			tp->flags &= ~ESP_TGT_DISCONNECT;
+			tp->nego_goal_period = 0;
+			tp->nego_goal_offset = 0;
+			tp->nego_goal_width = 0;
+			tp->nego_goal_tags = 0;
+		}
+
+		/* If the settings are not changing, skip this.  */
+		if (spi_width(tp->starget) == tp->nego_goal_width &&
+		    spi_period(tp->starget) == tp->nego_goal_period &&
+		    spi_offset(tp->starget) == tp->nego_goal_offset) {
+			tp->flags &= ~ESP_TGT_CHECK_NEGO;
+			goto build_identify;
+		}
+
+		if (esp->rev == FASHME && esp_need_to_nego_wide(tp)) {
+			esp->msg_out_len =
+				spi_populate_width_msg(&esp->msg_out[0],
+						       (tp->nego_goal_width ?
+							1 : 0));
+			tp->flags |= ESP_TGT_NEGO_WIDE;
+		} else if (esp_need_to_nego_sync(tp)) {
+			esp->msg_out_len =
+				spi_populate_sync_msg(&esp->msg_out[0],
+						      tp->nego_goal_period,
+						      tp->nego_goal_offset);
+			tp->flags |= ESP_TGT_NEGO_SYNC;
+		} else {
+			tp->flags &= ~ESP_TGT_CHECK_NEGO;
+		}
+
+		/* Process it like a slow command.  */
+		if (tp->flags & (ESP_TGT_NEGO_WIDE | ESP_TGT_NEGO_SYNC))
+			esp->flags |= ESP_FLAG_DOING_SLOWCMD;
+	}
+
+build_identify:
+	/* If we don't have a lun-data struct yet, we're probing
+	 * so do not disconnect.  Also, do not disconnect unless
+	 * we have a tag on this command.
+	 */
+	if (lp && (tp->flags & ESP_TGT_DISCONNECT) && ent->tag[0])
+		*p++ = IDENTIFY(1, lun);
+	else
+		*p++ = IDENTIFY(0, lun);
+
+	if (ent->tag[0] && esp->rev == ESP100) {
+		/* ESP100 lacks select w/atn3 command, use select
+		 * and stop instead.
+		 */
+		esp->flags |= ESP_FLAG_DOING_SLOWCMD;
+	}
+
+	if (!(esp->flags & ESP_FLAG_DOING_SLOWCMD)) {
+		start_cmd = ESP_CMD_DMA | ESP_CMD_SELA;
+		if (ent->tag[0]) {
+			*p++ = ent->tag[0];
+			*p++ = ent->tag[1];
+
+			start_cmd = ESP_CMD_DMA | ESP_CMD_SA3;
+		}
+
+		for (i = 0; i < cmd->cmd_len; i++)
+			*p++ = cmd->cmnd[i];
+
+		esp->select_state = ESP_SELECT_BASIC;
+	} else {
+		esp->cmd_bytes_left = cmd->cmd_len;
+		esp->cmd_bytes_ptr = &cmd->cmnd[0];
+
+		if (ent->tag[0]) {
+			for (i = esp->msg_out_len - 1;
+			     i >= 0; i--)
+				esp->msg_out[i + 2] = esp->msg_out[i];
+			esp->msg_out[0] = ent->tag[0];
+			esp->msg_out[1] = ent->tag[1];
+			esp->msg_out_len += 2;
+		}
+
+		start_cmd = ESP_CMD_DMA | ESP_CMD_SELAS;
+		esp->select_state = ESP_SELECT_MSGOUT;
+	}
+	val = tgt;
+	if (esp->rev == FASHME)
+		val |= ESP_BUSID_RESELID | ESP_BUSID_CTR32BIT;
+	esp_write8(val, ESP_BUSID);
+
+	esp_write_tgt_sync(esp, tgt);
+	esp_write_tgt_config3(esp, tgt);
+
+	val = (p - esp->command_block);
+
+	if (esp_debug & ESP_DEBUG_SCSICMD) {
+		printk("ESP: tgt[%d] lun[%d] scsi_cmd [ ", tgt, lun);
+		for (i = 0; i < cmd->cmd_len; i++)
+			printk("%02x ", cmd->cmnd[i]);
+		printk("]\n");
+	}
+
+	if (esp->rev == FASHME)
+		scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+	esp->ops->send_dma_cmd(esp, esp->command_block_dma,
+			       val, 16, 0, start_cmd);
+}
+
+static struct esp_cmd_entry *esp_get_ent(struct esp *esp)
+{
+	struct list_head *head = &esp->esp_cmd_pool;
+	struct esp_cmd_entry *ret;
+
+	if (list_empty(head)) {
+		ret = kzalloc(sizeof(struct esp_cmd_entry), GFP_ATOMIC);
+	} else {
+		ret = list_entry(head->next, struct esp_cmd_entry, list);
+		list_del(&ret->list);
+		memset(ret, 0, sizeof(*ret));
+	}
+	return ret;
+}
+
+static void esp_put_ent(struct esp *esp, struct esp_cmd_entry *ent)
+{
+	list_add(&ent->list, &esp->esp_cmd_pool);
+}
+
+static void esp_cmd_is_done(struct esp *esp, struct esp_cmd_entry *ent,
+			    struct scsi_cmnd *cmd, unsigned int result)
+{
+	struct scsi_device *dev = cmd->device;
+	int tgt = dev->id;
+	int lun = dev->lun;
+
+	esp->active_cmd = NULL;
+	esp_unmap_dma(esp, cmd);
+	esp_free_lun_tag(ent, dev->hostdata);
+	cmd->result = result;
+
+	if (ent->eh_done) {
+		complete(ent->eh_done);
+		ent->eh_done = NULL;
+	}
+
+	if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) {
+		esp->ops->unmap_single(esp, ent->sense_dma,
+				       SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
+		ent->sense_ptr = NULL;
+
+		/* Restore the message/status bytes to what we actually
+		 * saw originally.  Also, report that we are providing
+		 * the sense data.
+		 */
+		cmd->result = ((DRIVER_SENSE << 24) |
+			       (DID_OK << 16) |
+			       (COMMAND_COMPLETE << 8) |
+			       (SAM_STAT_CHECK_CONDITION << 0));
+
+		ent->flags &= ~ESP_CMD_FLAG_AUTOSENSE;
+		if (esp_debug & ESP_DEBUG_AUTOSENSE) {
+			int i;
+
+			printk("esp%d: tgt[%d] lun[%d] AUTO SENSE[ ",
+			       esp->host->unique_id, tgt, lun);
+			for (i = 0; i < 18; i++)
+				printk("%02x ", cmd->sense_buffer[i]);
+			printk("]\n");
+		}
+	}
+
+	cmd->scsi_done(cmd);
+
+	list_del(&ent->list);
+	esp_put_ent(esp, ent);
+
+	esp_maybe_execute_command(esp);
+}
+
+static unsigned int compose_result(unsigned int status, unsigned int message,
+				   unsigned int driver_code)
+{
+	return (status | (message << 8) | (driver_code << 16));
+}
+
+static void esp_event_queue_full(struct esp *esp, struct esp_cmd_entry *ent)
+{
+	struct scsi_device *dev = ent->cmd->device;
+	struct esp_lun_data *lp = dev->hostdata;
+
+	scsi_track_queue_full(dev, lp->num_tagged - 1);
+}
+
+static int esp_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+{
+	struct scsi_device *dev = cmd->device;
+	struct esp *esp = host_to_esp(dev->host);
+	struct esp_cmd_priv *spriv;
+	struct esp_cmd_entry *ent;
+
+	ent = esp_get_ent(esp);
+	if (!ent)
+		return SCSI_MLQUEUE_HOST_BUSY;
+
+	ent->cmd = cmd;
+
+	cmd->scsi_done = done;
+
+	spriv = ESP_CMD_PRIV(cmd);
+	spriv->u.dma_addr = ~(dma_addr_t)0x0;
+
+	list_add_tail(&ent->list, &esp->queued_cmds);
+
+	esp_maybe_execute_command(esp);
+
+	return 0;
+}
+
+static int esp_check_gross_error(struct esp *esp)
+{
+	if (esp->sreg & ESP_STAT_SPAM) {
+		/* Gross Error, could be one of:
+		 * - top of fifo overwritten
+		 * - top of command register overwritten
+		 * - DMA programmed with wrong direction
+		 * - improper phase change
+		 */
+		printk(KERN_ERR PFX "esp%d: Gross error sreg[%02x]\n",
+		       esp->host->unique_id, esp->sreg);
+		/* XXX Reset the chip. XXX */
+		return 1;
+	}
+	return 0;
+}
+
+static int esp_check_spur_intr(struct esp *esp)
+{
+	switch (esp->rev) {
+	case ESP100:
+	case ESP100A:
+		/* The interrupt pending bit of the status register cannot
+		 * be trusted on these revisions.
+		 */
+		esp->sreg &= ~ESP_STAT_INTR;
+		break;
+
+	default:
+		if (!(esp->sreg & ESP_STAT_INTR)) {
+			esp->ireg = esp_read8(ESP_INTRPT);
+			if (esp->ireg & ESP_INTR_SR)
+				return 1;
+
+			/* If the DMA is indicating interrupt pending and the
+			 * ESP is not, the only possibility is a DMA error.
+			 */
+			if (!esp->ops->dma_error(esp)) {
+				printk(KERN_ERR PFX "esp%d: Spurious irq, "
+				       "sreg=%x.\n",
+				       esp->host->unique_id, esp->sreg);
+				return -1;
+			}
+
+			printk(KERN_ERR PFX "esp%d: DMA error\n",
+			       esp->host->unique_id);
+
+			/* XXX Reset the chip. XXX */
+			return -1;
+		}
+		break;
+	}
+
+	return 0;
+}
+
+static void esp_schedule_reset(struct esp *esp)
+{
+	esp_log_reset("ESP: esp_schedule_reset() from %p\n",
+		      __builtin_return_address(0));
+	esp->flags |= ESP_FLAG_RESETTING;
+	esp_event(esp, ESP_EVENT_RESET);
+}
+
+/* In order to avoid having to add a special half-reconnected state
+ * into the driver we just sit here and poll through the rest of
+ * the reselection process to get the tag message bytes.
+ */
+static struct esp_cmd_entry *esp_reconnect_with_tag(struct esp *esp,
+						    struct esp_lun_data *lp)
+{
+	struct esp_cmd_entry *ent;
+	int i;
+
+	if (!lp->num_tagged) {
+		printk(KERN_ERR PFX "esp%d: Reconnect w/num_tagged==0\n",
+		       esp->host->unique_id);
+		return NULL;
+	}
+
+	esp_log_reconnect("ESP: reconnect tag, ");
+
+	for (i = 0; i < ESP_QUICKIRQ_LIMIT; i++) {
+		if (esp->ops->irq_pending(esp))
+			break;
+	}
+	if (i == ESP_QUICKIRQ_LIMIT) {
+		printk(KERN_ERR PFX "esp%d: Reconnect IRQ1 timeout\n",
+		       esp->host->unique_id);
+		return NULL;
+	}
+
+	esp->sreg = esp_read8(ESP_STATUS);
+	esp->ireg = esp_read8(ESP_INTRPT);
+
+	esp_log_reconnect("IRQ(%d:%x:%x), ",
+			  i, esp->ireg, esp->sreg);
+
+	if (esp->ireg & ESP_INTR_DC) {
+		printk(KERN_ERR PFX "esp%d: Reconnect, got disconnect.\n",
+		       esp->host->unique_id);
+		return NULL;
+	}
+
+	if ((esp->sreg & ESP_STAT_PMASK) != ESP_MIP) {
+		printk(KERN_ERR PFX "esp%d: Reconnect, not MIP sreg[%02x].\n",
+		       esp->host->unique_id, esp->sreg);
+		return NULL;
+	}
+
+	/* DMA in the tag bytes... */
+	esp->command_block[0] = 0xff;
+	esp->command_block[1] = 0xff;
+	esp->ops->send_dma_cmd(esp, esp->command_block_dma,
+			       2, 2, 1, ESP_CMD_DMA | ESP_CMD_TI);
+
+	/* ACK the msssage.  */
+	scsi_esp_cmd(esp, ESP_CMD_MOK);
+
+	for (i = 0; i < ESP_RESELECT_TAG_LIMIT; i++) {
+		if (esp->ops->irq_pending(esp)) {
+			esp->sreg = esp_read8(ESP_STATUS);
+			esp->ireg = esp_read8(ESP_INTRPT);
+			if (esp->ireg & ESP_INTR_FDONE)
+				break;
+		}
+		udelay(1);
+	}
+	if (i == ESP_RESELECT_TAG_LIMIT) {
+		printk(KERN_ERR PFX "esp%d: Reconnect IRQ2 timeout\n",
+		       esp->host->unique_id);
+		return NULL;
+	}
+	esp->ops->dma_drain(esp);
+	esp->ops->dma_invalidate(esp);
+
+	esp_log_reconnect("IRQ2(%d:%x:%x) tag[%x:%x]\n",
+			  i, esp->ireg, esp->sreg,
+			  esp->command_block[0],
+			  esp->command_block[1]);
+
+	if (esp->command_block[0] < SIMPLE_QUEUE_TAG ||
+	    esp->command_block[0] > ORDERED_QUEUE_TAG) {
+		printk(KERN_ERR PFX "esp%d: Reconnect, bad tag "
+		       "type %02x.\n",
+		       esp->host->unique_id, esp->command_block[0]);
+		return NULL;
+	}
+
+	ent = lp->tagged_cmds[esp->command_block[1]];
+	if (!ent) {
+		printk(KERN_ERR PFX "esp%d: Reconnect, no entry for "
+		       "tag %02x.\n",
+		       esp->host->unique_id, esp->command_block[1]);
+		return NULL;
+	}
+
+	return ent;
+}
+
+static int esp_reconnect(struct esp *esp)
+{
+	struct esp_cmd_entry *ent;
+	struct esp_target_data *tp;
+	struct esp_lun_data *lp;
+	struct scsi_device *dev;
+	int target, lun;
+
+	BUG_ON(esp->active_cmd);
+	if (esp->rev == FASHME) {
+		/* FASHME puts the target and lun numbers directly
+		 * into the fifo.
+		 */
+		target = esp->fifo[0];
+		lun = esp->fifo[1] & 0x7;
+	} else {
+		u8 bits = esp_read8(ESP_FDATA);
+
+		/* Older chips put the lun directly into the fifo, but
+		 * the target is given as a sample of the arbitration
+		 * lines on the bus at reselection time.  So we should
+		 * see the ID of the ESP and the one reconnecting target
+		 * set in the bitmap.
+		 */
+		if (!(bits & esp->scsi_id_mask))
+			goto do_reset;
+		bits &= ~esp->scsi_id_mask;
+		if (!bits || (bits & (bits - 1)))
+			goto do_reset;
+
+		target = ffs(bits) - 1;
+		lun = (esp_read8(ESP_FDATA) & 0x7);
+
+		scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+		if (esp->rev == ESP100) {
+			u8 ireg = esp_read8(ESP_INTRPT);
+			/* This chip has a bug during reselection that can
+			 * cause a spurious illegal-command interrupt, which
+			 * we simply ACK here.  Another possibility is a bus
+			 * reset so we must check for that.
+			 */
+			if (ireg & ESP_INTR_SR)
+				goto do_reset;
+		}
+		scsi_esp_cmd(esp, ESP_CMD_NULL);
+	}
+
+	esp_write_tgt_sync(esp, target);
+	esp_write_tgt_config3(esp, target);
+
+	scsi_esp_cmd(esp, ESP_CMD_MOK);
+
+	if (esp->rev == FASHME)
+		esp_write8(target | ESP_BUSID_RESELID | ESP_BUSID_CTR32BIT,
+			   ESP_BUSID);
+
+	tp = &esp->target[target];
+	dev = __scsi_device_lookup_by_target(tp->starget, lun);
+	if (!dev) {
+		printk(KERN_ERR PFX "esp%d: Reconnect, no lp "
+		       "tgt[%u] lun[%u]\n",
+		       esp->host->unique_id, target, lun);
+		goto do_reset;
+	}
+	lp = dev->hostdata;
+
+	ent = lp->non_tagged_cmd;
+	if (!ent) {
+		ent = esp_reconnect_with_tag(esp, lp);
+		if (!ent)
+			goto do_reset;
+	}
+
+	esp->active_cmd = ent;
+
+	if (ent->flags & ESP_CMD_FLAG_ABORT) {
+		esp->msg_out[0] = ABORT_TASK_SET;
+		esp->msg_out_len = 1;
+		scsi_esp_cmd(esp, ESP_CMD_SATN);
+	}
+
+	esp_event(esp, ESP_EVENT_CHECK_PHASE);
+	esp_restore_pointers(esp, ent);
+	esp->flags |= ESP_FLAG_QUICKIRQ_CHECK;
+	return 1;
+
+do_reset:
+	esp_schedule_reset(esp);
+	return 0;
+}
+
+static int esp_finish_select(struct esp *esp)
+{
+	struct esp_cmd_entry *ent;
+	struct scsi_cmnd *cmd;
+	u8 orig_select_state;
+
+	orig_select_state = esp->select_state;
+
+	/* No longer selecting.  */
+	esp->select_state = ESP_SELECT_NONE;
+
+	esp->seqreg = esp_read8(ESP_SSTEP) & ESP_STEP_VBITS;
+	ent = esp->active_cmd;
+	cmd = ent->cmd;
+
+	if (esp->ops->dma_error(esp)) {
+		/* If we see a DMA error during or as a result of selection,
+		 * all bets are off.
+		 */
+		esp_schedule_reset(esp);
+		esp_cmd_is_done(esp, ent, cmd, (DID_ERROR << 16));
+		return 0;
+	}
+
+	esp->ops->dma_invalidate(esp);
+
+	if (esp->ireg == (ESP_INTR_RSEL | ESP_INTR_FDONE)) {
+		struct esp_target_data *tp = &esp->target[cmd->device->id];
+
+		/* Carefully back out of the selection attempt.  Release
+		 * resources (such as DMA mapping & TAG) and reset state (such
+		 * as message out and command delivery variables).
+		 */
+		if (!(ent->flags & ESP_CMD_FLAG_AUTOSENSE)) {
+			esp_unmap_dma(esp, cmd);
+			esp_free_lun_tag(ent, cmd->device->hostdata);
+			tp->flags &= ~(ESP_TGT_NEGO_SYNC | ESP_TGT_NEGO_WIDE);
+			esp->flags &= ~ESP_FLAG_DOING_SLOWCMD;
+			esp->cmd_bytes_ptr = NULL;
+			esp->cmd_bytes_left = 0;
+		} else {
+			esp->ops->unmap_single(esp, ent->sense_dma,
+					       SCSI_SENSE_BUFFERSIZE,
+					       DMA_FROM_DEVICE);
+			ent->sense_ptr = NULL;
+		}
+
+		/* Now that the state is unwound properly, put back onto
+		 * the issue queue.  This command is no longer active.
+		 */
+		list_del(&ent->list);
+		list_add(&ent->list, &esp->queued_cmds);
+		esp->active_cmd = NULL;
+
+		/* Return value ignored by caller, it directly invokes
+		 * esp_reconnect().
+		 */
+		return 0;
+	}
+
+	if (esp->ireg == ESP_INTR_DC) {
+		struct scsi_device *dev = cmd->device;
+
+		/* Disconnect.  Make sure we re-negotiate sync and
+		 * wide parameters if this target starts responding
+		 * again in the future.
+		 */
+		esp->target[dev->id].flags |= ESP_TGT_CHECK_NEGO;
+
+		scsi_esp_cmd(esp, ESP_CMD_ESEL);
+		esp_cmd_is_done(esp, ent, cmd, (DID_BAD_TARGET << 16));
+		return 1;
+	}
+
+	if (esp->ireg == (ESP_INTR_FDONE | ESP_INTR_BSERV)) {
+		/* Selection successful.  On pre-FAST chips we have
+		 * to do a NOP and possibly clean out the FIFO.
+		 */
+		if (esp->rev <= ESP236) {
+			int fcnt = esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES;
+
+			scsi_esp_cmd(esp, ESP_CMD_NULL);
+
+			if (!fcnt &&
+			    (!esp->prev_soff ||
+			     ((esp->sreg & ESP_STAT_PMASK) != ESP_DIP)))
+				esp_flush_fifo(esp);
+		}
+
+		/* If we are doing a slow command, negotiation, etc.
+		 * we'll do the right thing as we transition to the
+		 * next phase.
+		 */
+		esp_event(esp, ESP_EVENT_CHECK_PHASE);
+		return 0;
+	}
+
+	printk("ESP: Unexpected selection completion ireg[%x].\n",
+	       esp->ireg);
+	esp_schedule_reset(esp);
+	return 0;
+}
+
+static int esp_data_bytes_sent(struct esp *esp, struct esp_cmd_entry *ent,
+			       struct scsi_cmnd *cmd)
+{
+	int fifo_cnt, ecount, bytes_sent, flush_fifo;
+
+	fifo_cnt = esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES;
+	if (esp->prev_cfg3 & ESP_CONFIG3_EWIDE)
+		fifo_cnt <<= 1;
+
+	ecount = 0;
+	if (!(esp->sreg & ESP_STAT_TCNT)) {
+		ecount = ((unsigned int)esp_read8(ESP_TCLOW) |
+			  (((unsigned int)esp_read8(ESP_TCMED)) << 8));
+		if (esp->rev == FASHME)
+			ecount |= ((unsigned int)esp_read8(FAS_RLO)) << 16;
+	}
+
+	bytes_sent = esp->data_dma_len;
+	bytes_sent -= ecount;
+
+	if (!(ent->flags & ESP_CMD_FLAG_WRITE))
+		bytes_sent -= fifo_cnt;
+
+	flush_fifo = 0;
+	if (!esp->prev_soff) {
+		/* Synchronous data transfer, always flush fifo. */
+		flush_fifo = 1;
+	} else {
+		if (esp->rev == ESP100) {
+			u32 fflags, phase;
+
+			/* ESP100 has a chip bug where in the synchronous data
+			 * phase it can mistake a final long REQ pulse from the
+			 * target as an extra data byte.  Fun.
+			 *
+			 * To detect this case we resample the status register
+			 * and fifo flags.  If we're still in a data phase and
+			 * we see spurious chunks in the fifo, we return error
+			 * to the caller which should reset and set things up
+			 * such that we only try future transfers to this
+			 * target in synchronous mode.
+			 */
+			esp->sreg = esp_read8(ESP_STATUS);
+			phase = esp->sreg & ESP_STAT_PMASK;
+			fflags = esp_read8(ESP_FFLAGS);
+
+			if ((phase == ESP_DOP &&
+			     (fflags & ESP_FF_ONOTZERO)) ||
+			    (phase == ESP_DIP &&
+			     (fflags & ESP_FF_FBYTES)))
+				return -1;
+		}
+		if (!(ent->flags & ESP_CMD_FLAG_WRITE))
+			flush_fifo = 1;
+	}
+
+	if (flush_fifo)
+		esp_flush_fifo(esp);
+
+	return bytes_sent;
+}
+
+static void esp_setsync(struct esp *esp, struct esp_target_data *tp,
+			u8 scsi_period, u8 scsi_offset,
+			u8 esp_stp, u8 esp_soff)
+{
+	spi_period(tp->starget) = scsi_period;
+	spi_offset(tp->starget) = scsi_offset;
+	spi_width(tp->starget) = (tp->flags & ESP_TGT_WIDE) ? 1 : 0;
+
+	if (esp_soff) {
+		esp_stp &= 0x1f;
+		esp_soff |= esp->radelay;
+		if (esp->rev >= FAS236) {
+			u8 bit = ESP_CONFIG3_FSCSI;
+			if (esp->rev >= FAS100A)
+				bit = ESP_CONFIG3_FAST;
+
+			if (scsi_period < 50) {
+				if (esp->rev == FASHME)
+					esp_soff &= ~esp->radelay;
+				tp->esp_config3 |= bit;
+			} else {
+				tp->esp_config3 &= ~bit;
+			}
+			esp->prev_cfg3 = tp->esp_config3;
+			esp_write8(esp->prev_cfg3, ESP_CFG3);
+		}
+	}
+
+	tp->esp_period = esp->prev_stp = esp_stp;
+	tp->esp_offset = esp->prev_soff = esp_soff;
+
+	esp_write8(esp_soff, ESP_SOFF);
+	esp_write8(esp_stp, ESP_STP);
+
+	tp->flags &= ~(ESP_TGT_NEGO_SYNC | ESP_TGT_CHECK_NEGO);
+
+	spi_display_xfer_agreement(tp->starget);
+}
+
+static void esp_msgin_reject(struct esp *esp)
+{
+	struct esp_cmd_entry *ent = esp->active_cmd;
+	struct scsi_cmnd *cmd = ent->cmd;
+	struct esp_target_data *tp;
+	int tgt;
+
+	tgt = cmd->device->id;
+	tp = &esp->target[tgt];
+
+	if (tp->flags & ESP_TGT_NEGO_WIDE) {
+		tp->flags &= ~(ESP_TGT_NEGO_WIDE | ESP_TGT_WIDE);
+
+		if (!esp_need_to_nego_sync(tp)) {
+			tp->flags &= ~ESP_TGT_CHECK_NEGO;
+			scsi_esp_cmd(esp, ESP_CMD_RATN);
+		} else {
+			esp->msg_out_len =
+				spi_populate_sync_msg(&esp->msg_out[0],
+						      tp->nego_goal_period,
+						      tp->nego_goal_offset);
+			tp->flags |= ESP_TGT_NEGO_SYNC;
+			scsi_esp_cmd(esp, ESP_CMD_SATN);
+		}
+		return;
+	}
+
+	if (tp->flags & ESP_TGT_NEGO_SYNC) {
+		tp->flags &= ~(ESP_TGT_NEGO_SYNC | ESP_TGT_CHECK_NEGO);
+		tp->esp_period = 0;
+		tp->esp_offset = 0;
+		esp_setsync(esp, tp, 0, 0, 0, 0);
+		scsi_esp_cmd(esp, ESP_CMD_RATN);
+		return;
+	}
+
+	esp->msg_out[0] = ABORT_TASK_SET;
+	esp->msg_out_len = 1;
+	scsi_esp_cmd(esp, ESP_CMD_SATN);
+}
+
+static void esp_msgin_sdtr(struct esp *esp, struct esp_target_data *tp)
+{
+	u8 period = esp->msg_in[3];
+	u8 offset = esp->msg_in[4];
+	u8 stp;
+
+	if (!(tp->flags & ESP_TGT_NEGO_SYNC))
+		goto do_reject;
+
+	if (offset > 15)
+		goto do_reject;
+
+	if (offset) {
+		int rounded_up, one_clock;
+
+		if (period > esp->max_period) {
+			period = offset = 0;
+			goto do_sdtr;
+		}
+		if (period < esp->min_period)
+			goto do_reject;
+
+		one_clock = esp->ccycle / 1000;
+		rounded_up = (period << 2);
+		rounded_up = (rounded_up + one_clock - 1) / one_clock;
+		stp = rounded_up;
+		if (stp && esp->rev >= FAS236) {
+			if (stp >= 50)
+				stp--;
+		}
+	} else {
+		stp = 0;
+	}
+
+	esp_setsync(esp, tp, period, offset, stp, offset);
+	return;
+
+do_reject:
+	esp->msg_out[0] = MESSAGE_REJECT;
+	esp->msg_out_len = 1;
+	scsi_esp_cmd(esp, ESP_CMD_SATN);
+	return;
+
+do_sdtr:
+	tp->nego_goal_period = period;
+	tp->nego_goal_offset = offset;
+	esp->msg_out_len =
+		spi_populate_sync_msg(&esp->msg_out[0],
+				      tp->nego_goal_period,
+				      tp->nego_goal_offset);
+	scsi_esp_cmd(esp, ESP_CMD_SATN);
+}
+
+static void esp_msgin_wdtr(struct esp *esp, struct esp_target_data *tp)
+{
+	int size = 8 << esp->msg_in[3];
+	u8 cfg3;
+
+	if (esp->rev != FASHME)
+		goto do_reject;
+
+	if (size != 8 && size != 16)
+		goto do_reject;
+
+	if (!(tp->flags & ESP_TGT_NEGO_WIDE))
+		goto do_reject;
+
+	cfg3 = tp->esp_config3;
+	if (size == 16) {
+		tp->flags |= ESP_TGT_WIDE;
+		cfg3 |= ESP_CONFIG3_EWIDE;
+	} else {
+		tp->flags &= ~ESP_TGT_WIDE;
+		cfg3 &= ~ESP_CONFIG3_EWIDE;
+	}
+	tp->esp_config3 = cfg3;
+	esp->prev_cfg3 = cfg3;
+	esp_write8(cfg3, ESP_CFG3);
+
+	tp->flags &= ~ESP_TGT_NEGO_WIDE;
+
+	spi_period(tp->starget) = 0;
+	spi_offset(tp->starget) = 0;
+	if (!esp_need_to_nego_sync(tp)) {
+		tp->flags &= ~ESP_TGT_CHECK_NEGO;
+		scsi_esp_cmd(esp, ESP_CMD_RATN);
+	} else {
+		esp->msg_out_len =
+			spi_populate_sync_msg(&esp->msg_out[0],
+					      tp->nego_goal_period,
+					      tp->nego_goal_offset);
+		tp->flags |= ESP_TGT_NEGO_SYNC;
+		scsi_esp_cmd(esp, ESP_CMD_SATN);
+	}
+	return;
+
+do_reject:
+	esp->msg_out[0] = MESSAGE_REJECT;
+	esp->msg_out_len = 1;
+	scsi_esp_cmd(esp, ESP_CMD_SATN);
+}
+
+static void esp_msgin_extended(struct esp *esp)
+{
+	struct esp_cmd_entry *ent = esp->active_cmd;
+	struct scsi_cmnd *cmd = ent->cmd;
+	struct esp_target_data *tp;
+	int tgt = cmd->device->id;
+
+	tp = &esp->target[tgt];
+	if (esp->msg_in[2] == EXTENDED_SDTR) {
+		esp_msgin_sdtr(esp, tp);
+		return;
+	}
+	if (esp->msg_in[2] == EXTENDED_WDTR) {
+		esp_msgin_wdtr(esp, tp);
+		return;
+	}
+
+	printk("ESP: Unexpected extended msg type %x\n",
+	       esp->msg_in[2]);
+
+	esp->msg_out[0] = ABORT_TASK_SET;
+	esp->msg_out_len = 1;
+	scsi_esp_cmd(esp, ESP_CMD_SATN);
+}
+
+/* Analyze msgin bytes received from target so far.  Return non-zero
+ * if there are more bytes needed to complete the message.
+ */
+static int esp_msgin_process(struct esp *esp)
+{
+	u8 msg0 = esp->msg_in[0];
+	int len = esp->msg_in_len;
+
+	if (msg0 & 0x80) {
+		/* Identify */
+		printk("ESP: Unexpected msgin identify\n");
+		return 0;
+	}
+
+	switch (msg0) {
+	case EXTENDED_MESSAGE:
+		if (len == 1)
+			return 1;
+		if (len < esp->msg_in[1] + 2)
+			return 1;
+		esp_msgin_extended(esp);
+		return 0;
+
+	case IGNORE_WIDE_RESIDUE: {
+		struct esp_cmd_entry *ent;
+		struct esp_cmd_priv *spriv;
+		if (len == 1)
+			return 1;
+
+		if (esp->msg_in[1] != 1)
+			goto do_reject;
+
+		ent = esp->active_cmd;
+		spriv = ESP_CMD_PRIV(ent->cmd);
+
+		if (spriv->cur_residue == sg_dma_len(spriv->cur_sg)) {
+			spriv->cur_sg--;
+			spriv->cur_residue = 1;
+		} else
+			spriv->cur_residue++;
+		spriv->tot_residue++;
+		return 0;
+	}
+	case NOP:
+		return 0;
+	case RESTORE_POINTERS:
+		esp_restore_pointers(esp, esp->active_cmd);
+		return 0;
+	case SAVE_POINTERS:
+		esp_save_pointers(esp, esp->active_cmd);
+		return 0;
+
+	case COMMAND_COMPLETE:
+	case DISCONNECT: {
+		struct esp_cmd_entry *ent = esp->active_cmd;
+
+		ent->message = msg0;
+		esp_event(esp, ESP_EVENT_FREE_BUS);
+		esp->flags |= ESP_FLAG_QUICKIRQ_CHECK;
+		return 0;
+	}
+	case MESSAGE_REJECT:
+		esp_msgin_reject(esp);
+		return 0;
+
+	default:
+	do_reject:
+		esp->msg_out[0] = MESSAGE_REJECT;
+		esp->msg_out_len = 1;
+		scsi_esp_cmd(esp, ESP_CMD_SATN);
+		return 0;
+	}
+}
+
+static int esp_process_event(struct esp *esp)
+{
+	int write;
+
+again:
+	write = 0;
+	switch (esp->event) {
+	case ESP_EVENT_CHECK_PHASE:
+		switch (esp->sreg & ESP_STAT_PMASK) {
+		case ESP_DOP:
+			esp_event(esp, ESP_EVENT_DATA_OUT);
+			break;
+		case ESP_DIP:
+			esp_event(esp, ESP_EVENT_DATA_IN);
+			break;
+		case ESP_STATP:
+			esp_flush_fifo(esp);
+			scsi_esp_cmd(esp, ESP_CMD_ICCSEQ);
+			esp_event(esp, ESP_EVENT_STATUS);
+			esp->flags |= ESP_FLAG_QUICKIRQ_CHECK;
+			return 1;
+
+		case ESP_MOP:
+			esp_event(esp, ESP_EVENT_MSGOUT);
+			break;
+
+		case ESP_MIP:
+			esp_event(esp, ESP_EVENT_MSGIN);
+			break;
+
+		case ESP_CMDP:
+			esp_event(esp, ESP_EVENT_CMD_START);
+			break;
+
+		default:
+			printk("ESP: Unexpected phase, sreg=%02x\n",
+			       esp->sreg);
+			esp_schedule_reset(esp);
+			return 0;
+		}
+		goto again;
+		break;
+
+	case ESP_EVENT_DATA_IN:
+		write = 1;
+		/* fallthru */
+
+	case ESP_EVENT_DATA_OUT: {
+		struct esp_cmd_entry *ent = esp->active_cmd;
+		struct scsi_cmnd *cmd = ent->cmd;
+		dma_addr_t dma_addr = esp_cur_dma_addr(ent, cmd);
+		unsigned int dma_len = esp_cur_dma_len(ent, cmd);
+
+		if (esp->rev == ESP100)
+			scsi_esp_cmd(esp, ESP_CMD_NULL);
+
+		if (write)
+			ent->flags |= ESP_CMD_FLAG_WRITE;
+		else
+			ent->flags &= ~ESP_CMD_FLAG_WRITE;
+
+		dma_len = esp_dma_length_limit(esp, dma_addr, dma_len);
+		esp->data_dma_len = dma_len;
+
+		if (!dma_len) {
+			printk(KERN_ERR PFX "esp%d: DMA length is zero!\n",
+			       esp->host->unique_id);
+			printk(KERN_ERR PFX "esp%d: cur adr[%08x] len[%08x]\n",
+			       esp->host->unique_id,
+			       esp_cur_dma_addr(ent, cmd),
+			       esp_cur_dma_len(ent, cmd));
+			esp_schedule_reset(esp);
+			return 0;
+		}
+
+		esp_log_datastart("ESP: start data addr[%08x] len[%u] "
+				  "write(%d)\n",
+				  dma_addr, dma_len, write);
+
+		esp->ops->send_dma_cmd(esp, dma_addr, dma_len, dma_len,
+				       write, ESP_CMD_DMA | ESP_CMD_TI);
+		esp_event(esp, ESP_EVENT_DATA_DONE);
+		break;
+	}
+	case ESP_EVENT_DATA_DONE: {
+		struct esp_cmd_entry *ent = esp->active_cmd;
+		struct scsi_cmnd *cmd = ent->cmd;
+		int bytes_sent;
+
+		if (esp->ops->dma_error(esp)) {
+			printk("ESP: data done, DMA error, resetting\n");
+			esp_schedule_reset(esp);
+			return 0;
+		}
+
+		if (ent->flags & ESP_CMD_FLAG_WRITE) {
+			/* XXX parity errors, etc. XXX */
+
+			esp->ops->dma_drain(esp);
+		}
+		esp->ops->dma_invalidate(esp);
+
+		if (esp->ireg != ESP_INTR_BSERV) {
+			/* We should always see exactly a bus-service
+			 * interrupt at the end of a successful transfer.
+			 */
+			printk("ESP: data done, not BSERV, resetting\n");
+			esp_schedule_reset(esp);
+			return 0;
+		}
+
+		bytes_sent = esp_data_bytes_sent(esp, ent, cmd);
+
+		esp_log_datadone("ESP: data done flgs[%x] sent[%d]\n",
+				 ent->flags, bytes_sent);
+
+		if (bytes_sent < 0) {
+			/* XXX force sync mode for this target XXX */
+			esp_schedule_reset(esp);
+			return 0;
+		}
+
+		esp_advance_dma(esp, ent, cmd, bytes_sent);
+		esp_event(esp, ESP_EVENT_CHECK_PHASE);
+		goto again;
+		break;
+	}
+
+	case ESP_EVENT_STATUS: {
+		struct esp_cmd_entry *ent = esp->active_cmd;
+
+		if (esp->ireg & ESP_INTR_FDONE) {
+			ent->status = esp_read8(ESP_FDATA);
+			ent->message = esp_read8(ESP_FDATA);
+			scsi_esp_cmd(esp, ESP_CMD_MOK);
+		} else if (esp->ireg == ESP_INTR_BSERV) {
+			ent->status = esp_read8(ESP_FDATA);
+			ent->message = 0xff;
+			esp_event(esp, ESP_EVENT_MSGIN);
+			return 0;
+		}
+
+		if (ent->message != COMMAND_COMPLETE) {
+			printk("ESP: Unexpected message %x in status\n",
+			       ent->message);
+			esp_schedule_reset(esp);
+			return 0;
+		}
+
+		esp_event(esp, ESP_EVENT_FREE_BUS);
+		esp->flags |= ESP_FLAG_QUICKIRQ_CHECK;
+		break;
+	}
+	case ESP_EVENT_FREE_BUS: {
+		struct esp_cmd_entry *ent = esp->active_cmd;
+		struct scsi_cmnd *cmd = ent->cmd;
+
+		if (ent->message == COMMAND_COMPLETE ||
+		    ent->message == DISCONNECT)
+			scsi_esp_cmd(esp, ESP_CMD_ESEL);
+
+		if (ent->message == COMMAND_COMPLETE) {
+			esp_log_cmddone("ESP: Command done status[%x] "
+					"message[%x]\n",
+					ent->status, ent->message);
+			if (ent->status == SAM_STAT_TASK_SET_FULL)
+				esp_event_queue_full(esp, ent);
+
+			if (ent->status == SAM_STAT_CHECK_CONDITION &&
+			    !(ent->flags & ESP_CMD_FLAG_AUTOSENSE)) {
+				ent->flags |= ESP_CMD_FLAG_AUTOSENSE;
+				esp_autosense(esp, ent);
+			} else {
+				esp_cmd_is_done(esp, ent, cmd,
+						compose_result(ent->status,
+							       ent->message,
+							       DID_OK));
+			}
+		} else if (ent->message == DISCONNECT) {
+			esp_log_disconnect("ESP: Disconnecting tgt[%d] "
+					   "tag[%x:%x]\n",
+					   cmd->device->id,
+					   ent->tag[0], ent->tag[1]);
+
+			esp->active_cmd = NULL;
+			esp_maybe_execute_command(esp);
+		} else {
+			printk("ESP: Unexpected message %x in freebus\n",
+			       ent->message);
+			esp_schedule_reset(esp);
+			return 0;
+		}
+		if (esp->active_cmd)
+			esp->flags |= ESP_FLAG_QUICKIRQ_CHECK;
+		break;
+	}
+	case ESP_EVENT_MSGOUT: {
+		scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+
+		if (esp_debug & ESP_DEBUG_MSGOUT) {
+			int i;
+			printk("ESP: Sending message [ ");
+			for (i = 0; i < esp->msg_out_len; i++)
+				printk("%02x ", esp->msg_out[i]);
+			printk("]\n");
+		}
+
+		if (esp->rev == FASHME) {
+			int i;
+
+			/* Always use the fifo.  */
+			for (i = 0; i < esp->msg_out_len; i++) {
+				esp_write8(esp->msg_out[i], ESP_FDATA);
+				esp_write8(0, ESP_FDATA);
+			}
+			scsi_esp_cmd(esp, ESP_CMD_TI);
+		} else {
+			if (esp->msg_out_len == 1) {
+				esp_write8(esp->msg_out[0], ESP_FDATA);
+				scsi_esp_cmd(esp, ESP_CMD_TI);
+			} else {
+				/* Use DMA. */
+				memcpy(esp->command_block,
+				       esp->msg_out,
+				       esp->msg_out_len);
+
+				esp->ops->send_dma_cmd(esp,
+						       esp->command_block_dma,
+						       esp->msg_out_len,
+						       esp->msg_out_len,
+						       0,
+						       ESP_CMD_DMA|ESP_CMD_TI);
+			}
+		}
+		esp_event(esp, ESP_EVENT_MSGOUT_DONE);
+		break;
+	}
+	case ESP_EVENT_MSGOUT_DONE:
+		if (esp->rev == FASHME) {
+			scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+		} else {
+			if (esp->msg_out_len > 1)
+				esp->ops->dma_invalidate(esp);
+		}
+
+		if (!(esp->ireg & ESP_INTR_DC)) {
+			if (esp->rev != FASHME)
+				scsi_esp_cmd(esp, ESP_CMD_NULL);
+		}
+		esp_event(esp, ESP_EVENT_CHECK_PHASE);
+		goto again;
+	case ESP_EVENT_MSGIN:
+		if (esp->ireg & ESP_INTR_BSERV) {
+			if (esp->rev == FASHME) {
+				if (!(esp_read8(ESP_STATUS2) &
+				      ESP_STAT2_FEMPTY))
+					scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+			} else {
+				scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+				if (esp->rev == ESP100)
+					scsi_esp_cmd(esp, ESP_CMD_NULL);
+			}
+			scsi_esp_cmd(esp, ESP_CMD_TI);
+			esp->flags |= ESP_FLAG_QUICKIRQ_CHECK;
+			return 1;
+		}
+		if (esp->ireg & ESP_INTR_FDONE) {
+			u8 val;
+
+			if (esp->rev == FASHME)
+				val = esp->fifo[0];
+			else
+				val = esp_read8(ESP_FDATA);
+			esp->msg_in[esp->msg_in_len++] = val;
+
+			esp_log_msgin("ESP: Got msgin byte %x\n", val);
+
+			if (!esp_msgin_process(esp))
+				esp->msg_in_len = 0;
+
+			if (esp->rev == FASHME)
+				scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+
+			scsi_esp_cmd(esp, ESP_CMD_MOK);
+
+			if (esp->event != ESP_EVENT_FREE_BUS)
+				esp_event(esp, ESP_EVENT_CHECK_PHASE);
+		} else {
+			printk("ESP: MSGIN neither BSERV not FDON, resetting");
+			esp_schedule_reset(esp);
+			return 0;
+		}
+		break;
+	case ESP_EVENT_CMD_START:
+		memcpy(esp->command_block, esp->cmd_bytes_ptr,
+		       esp->cmd_bytes_left);
+		if (esp->rev == FASHME)
+			scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+		esp->ops->send_dma_cmd(esp, esp->command_block_dma,
+				       esp->cmd_bytes_left, 16, 0,
+				       ESP_CMD_DMA | ESP_CMD_TI);
+		esp_event(esp, ESP_EVENT_CMD_DONE);
+		esp->flags |= ESP_FLAG_QUICKIRQ_CHECK;
+		break;
+	case ESP_EVENT_CMD_DONE:
+		esp->ops->dma_invalidate(esp);
+		if (esp->ireg & ESP_INTR_BSERV) {
+			esp_event(esp, ESP_EVENT_CHECK_PHASE);
+			goto again;
+		}
+		esp_schedule_reset(esp);
+		return 0;
+		break;
+
+	case ESP_EVENT_RESET:
+		scsi_esp_cmd(esp, ESP_CMD_RS);
+		break;
+
+	default:
+		printk("ESP: Unexpected event %x, resetting\n",
+		       esp->event);
+		esp_schedule_reset(esp);
+		return 0;
+		break;
+	}
+	return 1;
+}
+
+static void esp_reset_cleanup_one(struct esp *esp, struct esp_cmd_entry *ent)
+{
+	struct scsi_cmnd *cmd = ent->cmd;
+
+	esp_unmap_dma(esp, cmd);
+	esp_free_lun_tag(ent, cmd->device->hostdata);
+	cmd->result = DID_RESET << 16;
+
+	if (ent->flags & ESP_CMD_FLAG_AUTOSENSE) {
+		esp->ops->unmap_single(esp, ent->sense_dma,
+				       SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
+		ent->sense_ptr = NULL;
+	}
+
+	cmd->scsi_done(cmd);
+	list_del(&ent->list);
+	esp_put_ent(esp, ent);
+}
+
+static void esp_clear_hold(struct scsi_device *dev, void *data)
+{
+	struct esp_lun_data *lp = dev->hostdata;
+
+	BUG_ON(lp->num_tagged);
+	lp->hold = 0;
+}
+
+static void esp_reset_cleanup(struct esp *esp)
+{
+	struct esp_cmd_entry *ent, *tmp;
+	int i;
+
+	list_for_each_entry_safe(ent, tmp, &esp->queued_cmds, list) {
+		struct scsi_cmnd *cmd = ent->cmd;
+
+		list_del(&ent->list);
+		cmd->result = DID_RESET << 16;
+		cmd->scsi_done(cmd);
+		esp_put_ent(esp, ent);
+	}
+
+	list_for_each_entry_safe(ent, tmp, &esp->active_cmds, list) {
+		if (ent == esp->active_cmd)
+			esp->active_cmd = NULL;
+		esp_reset_cleanup_one(esp, ent);
+	}
+
+	BUG_ON(esp->active_cmd != NULL);
+
+	/* Force renegotiation of sync/wide transfers.  */
+	for (i = 0; i < ESP_MAX_TARGET; i++) {
+		struct esp_target_data *tp = &esp->target[i];
+
+		tp->esp_period = 0;
+		tp->esp_offset = 0;
+		tp->esp_config3 &= ~(ESP_CONFIG3_EWIDE |
+				     ESP_CONFIG3_FSCSI |
+				     ESP_CONFIG3_FAST);
+		tp->flags &= ~ESP_TGT_WIDE;
+		tp->flags |= ESP_TGT_CHECK_NEGO;
+
+		if (tp->starget)
+			starget_for_each_device(tp->starget, NULL,
+						esp_clear_hold);
+	}
+}
+
+/* Runs under host->lock */
+static void __esp_interrupt(struct esp *esp)
+{
+	int finish_reset, intr_done;
+	u8 phase;
+
+	esp->sreg = esp_read8(ESP_STATUS);
+
+	if (esp->flags & ESP_FLAG_RESETTING) {
+		finish_reset = 1;
+	} else {
+		if (esp_check_gross_error(esp))
+			return;
+
+		finish_reset = esp_check_spur_intr(esp);
+		if (finish_reset < 0)
+			return;
+	}
+
+	esp->ireg = esp_read8(ESP_INTRPT);
+
+	if (esp->ireg & ESP_INTR_SR)
+		finish_reset = 1;
+
+	if (finish_reset) {
+		esp_reset_cleanup(esp);
+		if (esp->eh_reset) {
+			complete(esp->eh_reset);
+			esp->eh_reset = NULL;
+		}
+		return;
+	}
+
+	phase = (esp->sreg & ESP_STAT_PMASK);
+	if (esp->rev == FASHME) {
+		if (((phase != ESP_DIP && phase != ESP_DOP) &&
+		     esp->select_state == ESP_SELECT_NONE &&
+		     esp->event != ESP_EVENT_STATUS &&
+		     esp->event != ESP_EVENT_DATA_DONE) ||
+		    (esp->ireg & ESP_INTR_RSEL)) {
+			esp->sreg2 = esp_read8(ESP_STATUS2);
+			if (!(esp->sreg2 & ESP_STAT2_FEMPTY) ||
+			    (esp->sreg2 & ESP_STAT2_F1BYTE))
+				hme_read_fifo(esp);
+		}
+	}
+
+	esp_log_intr("ESP: intr sreg[%02x] seqreg[%02x] "
+		     "sreg2[%02x] ireg[%02x]\n",
+		     esp->sreg, esp->seqreg, esp->sreg2, esp->ireg);
+
+	intr_done = 0;
+
+	if (esp->ireg & (ESP_INTR_S | ESP_INTR_SATN | ESP_INTR_IC)) {
+		printk("ESP: unexpected IREG %02x\n", esp->ireg);
+		if (esp->ireg & ESP_INTR_IC)
+			esp_dump_cmd_log(esp);
+
+		esp_schedule_reset(esp);
+	} else {
+		if (!(esp->ireg & ESP_INTR_RSEL)) {
+			/* Some combination of FDONE, BSERV, DC.  */
+			if (esp->select_state != ESP_SELECT_NONE)
+				intr_done = esp_finish_select(esp);
+		} else if (esp->ireg & ESP_INTR_RSEL) {
+			if (esp->active_cmd)
+				(void) esp_finish_select(esp);
+			intr_done = esp_reconnect(esp);
+		}
+	}
+	while (!intr_done)
+		intr_done = esp_process_event(esp);
+}
+
+irqreturn_t scsi_esp_intr(int irq, void *dev_id)
+{
+	struct esp *esp = dev_id;
+	unsigned long flags;
+	irqreturn_t ret;
+
+	spin_lock_irqsave(esp->host->host_lock, flags);
+	ret = IRQ_NONE;
+	if (esp->ops->irq_pending(esp)) {
+		ret = IRQ_HANDLED;
+		for (;;) {
+			int i;
+
+			__esp_interrupt(esp);
+			if (!(esp->flags & ESP_FLAG_QUICKIRQ_CHECK))
+				break;
+			esp->flags &= ~ESP_FLAG_QUICKIRQ_CHECK;
+
+			for (i = 0; i < ESP_QUICKIRQ_LIMIT; i++) {
+				if (esp->ops->irq_pending(esp))
+					break;
+			}
+			if (i == ESP_QUICKIRQ_LIMIT)
+				break;
+		}
+	}
+	spin_unlock_irqrestore(esp->host->host_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(scsi_esp_intr);
+
+static void __devinit esp_get_revision(struct esp *esp)
+{
+	u8 val;
+
+	esp->config1 = (ESP_CONFIG1_PENABLE | (esp->scsi_id & 7));
+	esp->config2 = (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY);
+	esp_write8(esp->config2, ESP_CFG2);
+
+	val = esp_read8(ESP_CFG2);
+	val &= ~ESP_CONFIG2_MAGIC;
+	if (val != (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY)) {
+		/* If what we write to cfg2 does not come back, cfg2 is not
+		 * implemented, therefore this must be a plain esp100.
+		 */
+		esp->rev = ESP100;
+	} else {
+		esp->config2 = 0;
+		esp_set_all_config3(esp, 5);
+		esp->prev_cfg3 = 5;
+		esp_write8(esp->config2, ESP_CFG2);
+		esp_write8(0, ESP_CFG3);
+		esp_write8(esp->prev_cfg3, ESP_CFG3);
+
+		val = esp_read8(ESP_CFG3);
+		if (val != 5) {
+			/* The cfg2 register is implemented, however
+			 * cfg3 is not, must be esp100a.
+			 */
+			esp->rev = ESP100A;
+		} else {
+			esp_set_all_config3(esp, 0);
+			esp->prev_cfg3 = 0;
+			esp_write8(esp->prev_cfg3, ESP_CFG3);
+
+			/* All of cfg{1,2,3} implemented, must be one of
+			 * the fas variants, figure out which one.
+			 */
+			if (esp->cfact == 0 || esp->cfact > ESP_CCF_F5) {
+				esp->rev = FAST;
+				esp->sync_defp = SYNC_DEFP_FAST;
+			} else {
+				esp->rev = ESP236;
+			}
+			esp->config2 = 0;
+			esp_write8(esp->config2, ESP_CFG2);
+		}
+	}
+}
+
+static void __devinit esp_init_swstate(struct esp *esp)
+{
+	int i;
+
+	INIT_LIST_HEAD(&esp->queued_cmds);
+	INIT_LIST_HEAD(&esp->active_cmds);
+	INIT_LIST_HEAD(&esp->esp_cmd_pool);
+
+	/* Start with a clear state, domain validation (via ->slave_configure,
+	 * spi_dv_device()) will attempt to enable SYNC, WIDE, and tagged
+	 * commands.
+	 */
+	for (i = 0 ; i < ESP_MAX_TARGET; i++) {
+		esp->target[i].flags = 0;
+		esp->target[i].nego_goal_period = 0;
+		esp->target[i].nego_goal_offset = 0;
+		esp->target[i].nego_goal_width = 0;
+		esp->target[i].nego_goal_tags = 0;
+	}
+}
+
+/* This places the ESP into a known state at boot time. */
+static void __devinit esp_bootup_reset(struct esp *esp)
+{
+	u8 val;
+
+	/* Reset the DMA */
+	esp->ops->reset_dma(esp);
+
+	/* Reset the ESP */
+	esp_reset_esp(esp);
+
+	/* Reset the SCSI bus, but tell ESP not to generate an irq */
+	val = esp_read8(ESP_CFG1);
+	val |= ESP_CONFIG1_SRRDISAB;
+	esp_write8(val, ESP_CFG1);
+
+	scsi_esp_cmd(esp, ESP_CMD_RS);
+	udelay(400);
+
+	esp_write8(esp->config1, ESP_CFG1);
+
+	/* Eat any bitrot in the chip and we are done... */
+	esp_read8(ESP_INTRPT);
+}
+
+static void __devinit esp_set_clock_params(struct esp *esp)
+{
+	int fmhz;
+	u8 ccf;
+
+	/* This is getting messy but it has to be done correctly or else
+	 * you get weird behavior all over the place.  We are trying to
+	 * basically figure out three pieces of information.
+	 *
+	 * a) Clock Conversion Factor
+	 *
+	 *    This is a representation of the input crystal clock frequency
+	 *    going into the ESP on this machine.  Any operation whose timing
+	 *    is longer than 400ns depends on this value being correct.  For
+	 *    example, you'll get blips for arbitration/selection during high
+	 *    load or with multiple targets if this is not set correctly.
+	 *
+	 * b) Selection Time-Out
+	 *
+	 *    The ESP isn't very bright and will arbitrate for the bus and try
+	 *    to select a target forever if you let it.  This value tells the
+	 *    ESP when it has taken too long to negotiate and that it should
+	 *    interrupt the CPU so we can see what happened.  The value is
+	 *    computed as follows (from NCR/Symbios chip docs).
+	 *
+	 *          (Time Out Period) *  (Input Clock)
+	 *    STO = ----------------------------------
+	 *          (8192) * (Clock Conversion Factor)
+	 *
+	 *    We use a time out period of 250ms (ESP_BUS_TIMEOUT).
+	 *
+	 * c) Imperical constants for synchronous offset and transfer period
+         *    register values
+	 *
+	 *    This entails the smallest and largest sync period we could ever
+	 *    handle on this ESP.
+	 */
+	fmhz = esp->cfreq;
+
+	ccf = ((fmhz / 1000000) + 4) / 5;
+	if (ccf == 1)
+		ccf = 2;
+
+	/* If we can't find anything reasonable, just assume 20MHZ.
+	 * This is the clock frequency of the older sun4c's where I've
+	 * been unable to find the clock-frequency PROM property.  All
+	 * other machines provide useful values it seems.
+	 */
+	if (fmhz <= 5000000 || ccf < 1 || ccf > 8) {
+		fmhz = 20000000;
+		ccf = 4;
+	}
+
+	esp->cfact = (ccf == 8 ? 0 : ccf);
+	esp->cfreq = fmhz;
+	esp->ccycle = ESP_MHZ_TO_CYCLE(fmhz);
+	esp->ctick = ESP_TICK(ccf, esp->ccycle);
+	esp->neg_defp = ESP_NEG_DEFP(fmhz, ccf);
+	esp->sync_defp = SYNC_DEFP_SLOW;
+}
+
+static const char *esp_chip_names[] = {
+	"ESP100",
+	"ESP100A",
+	"ESP236",
+	"FAS236",
+	"FAS100A",
+	"FAST",
+	"FASHME",
+};
+
+static struct scsi_transport_template *esp_transport_template;
+
+int __devinit scsi_esp_register(struct esp *esp, struct device *dev)
+{
+	static int instance;
+	int err;
+
+	esp->host->transportt = esp_transport_template;
+	esp->host->max_lun = ESP_MAX_LUN;
+	esp->host->cmd_per_lun = 2;
+
+	esp_set_clock_params(esp);
+
+	esp_get_revision(esp);
+
+	esp_init_swstate(esp);
+
+	esp_bootup_reset(esp);
+
+	printk(KERN_INFO PFX "esp%u, regs[%1p:%1p] irq[%u]\n",
+	       esp->host->unique_id, esp->regs, esp->dma_regs,
+	       esp->host->irq);
+	printk(KERN_INFO PFX "esp%u is a %s, %u MHz (ccf=%u), SCSI ID %u\n",
+	       esp->host->unique_id, esp_chip_names[esp->rev],
+	       esp->cfreq / 1000000, esp->cfact, esp->scsi_id);
+
+	/* Let the SCSI bus reset settle. */
+	ssleep(esp_bus_reset_settle);
+
+	err = scsi_add_host(esp->host, dev);
+	if (err)
+		return err;
+
+	esp->host->unique_id = instance++;
+
+	scsi_scan_host(esp->host);
+
+	return 0;
+}
+EXPORT_SYMBOL(scsi_esp_register);
+
+void __devexit scsi_esp_unregister(struct esp *esp)
+{
+	scsi_remove_host(esp->host);
+}
+EXPORT_SYMBOL(scsi_esp_unregister);
+
+static int esp_slave_alloc(struct scsi_device *dev)
+{
+	struct esp *esp = host_to_esp(dev->host);
+	struct esp_target_data *tp = &esp->target[dev->id];
+	struct esp_lun_data *lp;
+
+	lp = kzalloc(sizeof(*lp), GFP_KERNEL);
+	if (!lp)
+		return -ENOMEM;
+	dev->hostdata = lp;
+
+	tp->starget = dev->sdev_target;
+
+	spi_min_period(tp->starget) = esp->min_period;
+	spi_max_offset(tp->starget) = 15;
+
+	if (esp->flags & ESP_FLAG_WIDE_CAPABLE)
+		spi_max_width(tp->starget) = 1;
+	else
+		spi_max_width(tp->starget) = 0;
+
+	return 0;
+}
+
+static int esp_slave_configure(struct scsi_device *dev)
+{
+	struct esp *esp = host_to_esp(dev->host);
+	struct esp_target_data *tp = &esp->target[dev->id];
+	int goal_tags, queue_depth;
+
+	goal_tags = 0;
+
+	if (dev->tagged_supported) {
+		/* XXX make this configurable somehow XXX */
+		goal_tags = ESP_DEFAULT_TAGS;
+
+		if (goal_tags > ESP_MAX_TAG)
+			goal_tags = ESP_MAX_TAG;
+	}
+
+	queue_depth = goal_tags;
+	if (queue_depth < dev->host->cmd_per_lun)
+		queue_depth = dev->host->cmd_per_lun;
+
+	if (goal_tags) {
+		scsi_set_tag_type(dev, MSG_ORDERED_TAG);
+		scsi_activate_tcq(dev, queue_depth);
+	} else {
+		scsi_deactivate_tcq(dev, queue_depth);
+	}
+	tp->flags |= ESP_TGT_DISCONNECT;
+
+	if (!spi_initial_dv(dev->sdev_target))
+		spi_dv_device(dev);
+
+	return 0;
+}
+
+static void esp_slave_destroy(struct scsi_device *dev)
+{
+	struct esp_lun_data *lp = dev->hostdata;
+
+	kfree(lp);
+	dev->hostdata = NULL;
+}
+
+static int esp_eh_abort_handler(struct scsi_cmnd *cmd)
+{
+	struct esp *esp = host_to_esp(cmd->device->host);
+	struct esp_cmd_entry *ent, *tmp;
+	struct completion eh_done;
+	unsigned long flags;
+
+	/* XXX This helps a lot with debugging but might be a bit
+	 * XXX much for the final driver.
+	 */
+	spin_lock_irqsave(esp->host->host_lock, flags);
+	printk(KERN_ERR PFX "esp%d: Aborting command [%p:%02x]\n",
+	       esp->host->unique_id, cmd, cmd->cmnd[0]);
+	ent = esp->active_cmd;
+	if (ent)
+		printk(KERN_ERR PFX "esp%d: Current command [%p:%02x]\n",
+		       esp->host->unique_id, ent->cmd, ent->cmd->cmnd[0]);
+	list_for_each_entry(ent, &esp->queued_cmds, list) {
+		printk(KERN_ERR PFX "esp%d: Queued command [%p:%02x]\n",
+		       esp->host->unique_id, ent->cmd, ent->cmd->cmnd[0]);
+	}
+	list_for_each_entry(ent, &esp->active_cmds, list) {
+		printk(KERN_ERR PFX "esp%d: Active command [%p:%02x]\n",
+		       esp->host->unique_id, ent->cmd, ent->cmd->cmnd[0]);
+	}
+	esp_dump_cmd_log(esp);
+	spin_unlock_irqrestore(esp->host->host_lock, flags);
+
+	spin_lock_irqsave(esp->host->host_lock, flags);
+
+	ent = NULL;
+	list_for_each_entry(tmp, &esp->queued_cmds, list) {
+		if (tmp->cmd == cmd) {
+			ent = tmp;
+			break;
+		}
+	}
+
+	if (ent) {
+		/* Easiest case, we didn't even issue the command
+		 * yet so it is trivial to abort.
+		 */
+		list_del(&ent->list);
+
+		cmd->result = DID_ABORT << 16;
+		cmd->scsi_done(cmd);
+
+		esp_put_ent(esp, ent);
+
+		goto out_success;
+	}
+
+	init_completion(&eh_done);
+
+	ent = esp->active_cmd;
+	if (ent && ent->cmd == cmd) {
+		/* Command is the currently active command on
+		 * the bus.  If we already have an output message
+		 * pending, no dice.
+		 */
+		if (esp->msg_out_len)
+			goto out_failure;
+
+		/* Send out an abort, encouraging the target to
+		 * go to MSGOUT phase by asserting ATN.
+		 */
+		esp->msg_out[0] = ABORT_TASK_SET;
+		esp->msg_out_len = 1;
+		ent->eh_done = &eh_done;
+
+		scsi_esp_cmd(esp, ESP_CMD_SATN);
+	} else {
+		/* The command is disconnected.  This is not easy to
+		 * abort.  For now we fail and let the scsi error
+		 * handling layer go try a scsi bus reset or host
+		 * reset.
+		 *
+		 * What we could do is put together a scsi command
+		 * solely for the purpose of sending an abort message
+		 * to the target.  Coming up with all the code to
+		 * cook up scsi commands, special case them everywhere,
+		 * etc. is for questionable gain and it would be better
+		 * if the generic scsi error handling layer could do at
+		 * least some of that for us.
+		 *
+		 * Anyways this is an area for potential future improvement
+		 * in this driver.
+		 */
+		goto out_failure;
+	}
+
+	spin_unlock_irqrestore(esp->host->host_lock, flags);
+
+	if (!wait_for_completion_timeout(&eh_done, 5 * HZ)) {
+		spin_lock_irqsave(esp->host->host_lock, flags);
+		ent->eh_done = NULL;
+		spin_unlock_irqrestore(esp->host->host_lock, flags);
+
+		return FAILED;
+	}
+
+	return SUCCESS;
+
+out_success:
+	spin_unlock_irqrestore(esp->host->host_lock, flags);
+	return SUCCESS;
+
+out_failure:
+	/* XXX This might be a good location to set ESP_TGT_BROKEN
+	 * XXX since we know which target/lun in particular is
+	 * XXX causing trouble.
+	 */
+	spin_unlock_irqrestore(esp->host->host_lock, flags);
+	return FAILED;
+}
+
+static int esp_eh_bus_reset_handler(struct scsi_cmnd *cmd)
+{
+	struct esp *esp = host_to_esp(cmd->device->host);
+	struct completion eh_reset;
+	unsigned long flags;
+
+	init_completion(&eh_reset);
+
+	spin_lock_irqsave(esp->host->host_lock, flags);
+
+	esp->eh_reset = &eh_reset;
+
+	/* XXX This is too simple... We should add lots of
+	 * XXX checks here so that if we find that the chip is
+	 * XXX very wedged we return failure immediately so
+	 * XXX that we can perform a full chip reset.
+	 */
+	esp->flags |= ESP_FLAG_RESETTING;
+	scsi_esp_cmd(esp, ESP_CMD_RS);
+
+	spin_unlock_irqrestore(esp->host->host_lock, flags);
+
+	ssleep(esp_bus_reset_settle);
+
+	if (!wait_for_completion_timeout(&eh_reset, 5 * HZ)) {
+		spin_lock_irqsave(esp->host->host_lock, flags);
+		esp->eh_reset = NULL;
+		spin_unlock_irqrestore(esp->host->host_lock, flags);
+
+		return FAILED;
+	}
+
+	return SUCCESS;
+}
+
+/* All bets are off, reset the entire device.  */
+static int esp_eh_host_reset_handler(struct scsi_cmnd *cmd)
+{
+	struct esp *esp = host_to_esp(cmd->device->host);
+	unsigned long flags;
+
+	spin_lock_irqsave(esp->host->host_lock, flags);
+	esp_bootup_reset(esp);
+	esp_reset_cleanup(esp);
+	spin_unlock_irqrestore(esp->host->host_lock, flags);
+
+	ssleep(esp_bus_reset_settle);
+
+	return SUCCESS;
+}
+
+static const char *esp_info(struct Scsi_Host *host)
+{
+	return "esp";
+}
+
+struct scsi_host_template scsi_esp_template = {
+	.module			= THIS_MODULE,
+	.name			= "esp",
+	.info			= esp_info,
+	.queuecommand		= esp_queuecommand,
+	.slave_alloc		= esp_slave_alloc,
+	.slave_configure	= esp_slave_configure,
+	.slave_destroy		= esp_slave_destroy,
+	.eh_abort_handler	= esp_eh_abort_handler,
+	.eh_bus_reset_handler	= esp_eh_bus_reset_handler,
+	.eh_host_reset_handler	= esp_eh_host_reset_handler,
+	.can_queue		= 7,
+	.this_id		= 7,
+	.sg_tablesize		= SG_ALL,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.max_sectors		= 0xffff,
+	.skip_settle_delay	= 1,
+};
+EXPORT_SYMBOL(scsi_esp_template);
+
+static void esp_get_signalling(struct Scsi_Host *host)
+{
+	struct esp *esp = host_to_esp(host);
+	enum spi_signal_type type;
+
+	if (esp->flags & ESP_FLAG_DIFFERENTIAL)
+		type = SPI_SIGNAL_HVD;
+	else
+		type = SPI_SIGNAL_SE;
+
+	spi_signalling(host) = type;
+}
+
+static void esp_set_offset(struct scsi_target *target, int offset)
+{
+	struct Scsi_Host *host = dev_to_shost(target->dev.parent);
+	struct esp *esp = host_to_esp(host);
+	struct esp_target_data *tp = &esp->target[target->id];
+
+	tp->nego_goal_offset = offset;
+	tp->flags |= ESP_TGT_CHECK_NEGO;
+}
+
+static void esp_set_period(struct scsi_target *target, int period)
+{
+	struct Scsi_Host *host = dev_to_shost(target->dev.parent);
+	struct esp *esp = host_to_esp(host);
+	struct esp_target_data *tp = &esp->target[target->id];
+
+	tp->nego_goal_period = period;
+	tp->flags |= ESP_TGT_CHECK_NEGO;
+}
+
+static void esp_set_width(struct scsi_target *target, int width)
+{
+	struct Scsi_Host *host = dev_to_shost(target->dev.parent);
+	struct esp *esp = host_to_esp(host);
+	struct esp_target_data *tp = &esp->target[target->id];
+
+	tp->nego_goal_width = (width ? 1 : 0);
+	tp->flags |= ESP_TGT_CHECK_NEGO;
+}
+
+static struct spi_function_template esp_transport_ops = {
+	.set_offset		= esp_set_offset,
+	.show_offset		= 1,
+	.set_period		= esp_set_period,
+	.show_period		= 1,
+	.set_width		= esp_set_width,
+	.show_width		= 1,
+	.get_signalling		= esp_get_signalling,
+};
+
+static int __init esp_init(void)
+{
+	BUILD_BUG_ON(sizeof(struct scsi_pointer) <
+		     sizeof(struct esp_cmd_priv));
+
+	esp_transport_template = spi_attach_transport(&esp_transport_ops);
+	if (!esp_transport_template)
+		return -ENODEV;
+
+	return 0;
+}
+
+static void __exit esp_exit(void)
+{
+	spi_release_transport(esp_transport_template);
+}
+
+MODULE_DESCRIPTION("ESP SCSI driver core");
+MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(esp_bus_reset_settle, int, 0);
+MODULE_PARM_DESC(esp_bus_reset_settle,
+		 "ESP scsi bus reset delay in seconds");
+
+module_param(esp_debug, int, 0);
+MODULE_PARM_DESC(esp_debug,
+"ESP bitmapped debugging message enable value:\n"
+"	0x00000001	Log interrupt events\n"
+"	0x00000002	Log scsi commands\n"
+"	0x00000004	Log resets\n"
+"	0x00000008	Log message in events\n"
+"	0x00000010	Log message out events\n"
+"	0x00000020	Log command completion\n"
+"	0x00000040	Log disconnects\n"
+"	0x00000080	Log data start\n"
+"	0x00000100	Log data done\n"
+"	0x00000200	Log reconnects\n"
+"	0x00000400	Log auto-sense data\n"
+);
+
+module_init(esp_init);
+module_exit(esp_exit);
diff --git a/drivers/scsi/esp_scsi.h b/drivers/scsi/esp_scsi.h
new file mode 100644
index 00000000000..8d4a6690401
--- /dev/null
+++ b/drivers/scsi/esp_scsi.h
@@ -0,0 +1,560 @@
+/* esp_scsi.h: Defines and structures for the ESP drier.
+ *
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _ESP_SCSI_H
+#define _ESP_SCSI_H
+
+					/* Access    Description      Offset */
+#define ESP_TCLOW	0x00UL		/* rw  Low bits transfer count 0x00  */
+#define ESP_TCMED	0x01UL		/* rw  Mid bits transfer count 0x04  */
+#define ESP_FDATA	0x02UL		/* rw  FIFO data bits          0x08  */
+#define ESP_CMD		0x03UL		/* rw  SCSI command bits       0x0c  */
+#define ESP_STATUS	0x04UL		/* ro  ESP status register     0x10  */
+#define ESP_BUSID	ESP_STATUS	/* wo  BusID for sel/resel     0x10  */
+#define ESP_INTRPT	0x05UL		/* ro  Kind of interrupt       0x14  */
+#define ESP_TIMEO	ESP_INTRPT	/* wo  Timeout for sel/resel   0x14  */
+#define ESP_SSTEP	0x06UL		/* ro  Sequence step register  0x18  */
+#define ESP_STP		ESP_SSTEP	/* wo  Transfer period/sync    0x18  */
+#define ESP_FFLAGS	0x07UL		/* ro  Bits current FIFO info  0x1c  */
+#define ESP_SOFF	ESP_FFLAGS	/* wo  Sync offset             0x1c  */
+#define ESP_CFG1	0x08UL		/* rw  First cfg register      0x20  */
+#define ESP_CFACT	0x09UL		/* wo  Clock conv factor       0x24  */
+#define ESP_STATUS2	ESP_CFACT	/* ro  HME status2 register    0x24  */
+#define ESP_CTEST	0x0aUL		/* wo  Chip test register      0x28  */
+#define ESP_CFG2	0x0bUL		/* rw  Second cfg register     0x2c  */
+#define ESP_CFG3	0x0cUL		/* rw  Third cfg register      0x30  */
+#define ESP_TCHI	0x0eUL		/* rw  High bits transf count  0x38  */
+#define ESP_UID		ESP_TCHI	/* ro  Unique ID code          0x38  */
+#define FAS_RLO		ESP_TCHI	/* rw  HME extended counter    0x38  */
+#define ESP_FGRND	0x0fUL		/* rw  Data base for fifo      0x3c  */
+#define FAS_RHI		ESP_FGRND	/* rw  HME extended counter    0x3c  */
+
+#define SBUS_ESP_REG_SIZE	0x40UL
+
+/* Bitfield meanings for the above registers. */
+
+/* ESP config reg 1, read-write, found on all ESP chips */
+#define ESP_CONFIG1_ID        0x07      /* My BUS ID bits */
+#define ESP_CONFIG1_CHTEST    0x08      /* Enable ESP chip tests */
+#define ESP_CONFIG1_PENABLE   0x10      /* Enable parity checks */
+#define ESP_CONFIG1_PARTEST   0x20      /* Parity test mode enabled? */
+#define ESP_CONFIG1_SRRDISAB  0x40      /* Disable SCSI reset reports */
+#define ESP_CONFIG1_SLCABLE   0x80      /* Enable slow cable mode */
+
+/* ESP config reg 2, read-write, found only on esp100a+esp200+esp236 chips */
+#define ESP_CONFIG2_DMAPARITY 0x01      /* enable DMA Parity (200,236) */
+#define ESP_CONFIG2_REGPARITY 0x02      /* enable reg Parity (200,236) */
+#define ESP_CONFIG2_BADPARITY 0x04      /* Bad parity target abort  */
+#define ESP_CONFIG2_SCSI2ENAB 0x08      /* Enable SCSI-2 features (tgtmode) */
+#define ESP_CONFIG2_HI        0x10      /* High Impedance DREQ ???  */
+#define ESP_CONFIG2_HMEFENAB  0x10      /* HME features enable */
+#define ESP_CONFIG2_BCM       0x20      /* Enable byte-ctrl (236)   */
+#define ESP_CONFIG2_DISPINT   0x20      /* Disable pause irq (hme) */
+#define ESP_CONFIG2_FENAB     0x40      /* Enable features (fas100,216) */
+#define ESP_CONFIG2_SPL       0x40      /* Enable status-phase latch (236) */
+#define ESP_CONFIG2_MKDONE    0x40      /* HME magic feature */
+#define ESP_CONFIG2_HME32     0x80      /* HME 32 extended */
+#define ESP_CONFIG2_MAGIC     0xe0      /* Invalid bits... */
+
+/* ESP config register 3 read-write, found only esp236+fas236+fas100a+hme chips */
+#define ESP_CONFIG3_FCLOCK    0x01     /* FAST SCSI clock rate (esp100a/hme) */
+#define ESP_CONFIG3_TEM       0x01     /* Enable thresh-8 mode (esp/fas236)  */
+#define ESP_CONFIG3_FAST      0x02     /* Enable FAST SCSI     (esp100a/hme) */
+#define ESP_CONFIG3_ADMA      0x02     /* Enable alternate-dma (esp/fas236)  */
+#define ESP_CONFIG3_TENB      0x04     /* group2 SCSI2 support (esp100a/hme) */
+#define ESP_CONFIG3_SRB       0x04     /* Save residual byte   (esp/fas236)  */
+#define ESP_CONFIG3_TMS       0x08     /* Three-byte msg's ok  (esp100a/hme) */
+#define ESP_CONFIG3_FCLK      0x08     /* Fast SCSI clock rate (esp/fas236)  */
+#define ESP_CONFIG3_IDMSG     0x10     /* ID message checking  (esp100a/hme) */
+#define ESP_CONFIG3_FSCSI     0x10     /* Enable FAST SCSI     (esp/fas236)  */
+#define ESP_CONFIG3_GTM       0x20     /* group2 SCSI2 support (esp/fas236)  */
+#define ESP_CONFIG3_IDBIT3    0x20     /* Bit 3 of HME SCSI-ID (hme)         */
+#define ESP_CONFIG3_TBMS      0x40     /* Three-byte msg's ok  (esp/fas236)  */
+#define ESP_CONFIG3_EWIDE     0x40     /* Enable Wide-SCSI     (hme)         */
+#define ESP_CONFIG3_IMS       0x80     /* ID msg chk'ng        (esp/fas236)  */
+#define ESP_CONFIG3_OBPUSH    0x80     /* Push odd-byte to dma (hme)         */
+
+/* ESP command register read-write */
+/* Group 1 commands:  These may be sent at any point in time to the ESP
+ *                    chip.  None of them can generate interrupts 'cept
+ *                    the "SCSI bus reset" command if you have not disabled
+ *                    SCSI reset interrupts in the config1 ESP register.
+ */
+#define ESP_CMD_NULL          0x00     /* Null command, ie. a nop */
+#define ESP_CMD_FLUSH         0x01     /* FIFO Flush */
+#define ESP_CMD_RC            0x02     /* Chip reset */
+#define ESP_CMD_RS            0x03     /* SCSI bus reset */
+
+/* Group 2 commands:  ESP must be an initiator and connected to a target
+ *                    for these commands to work.
+ */
+#define ESP_CMD_TI            0x10     /* Transfer Information */
+#define ESP_CMD_ICCSEQ        0x11     /* Initiator cmd complete sequence */
+#define ESP_CMD_MOK           0x12     /* Message okie-dokie */
+#define ESP_CMD_TPAD          0x18     /* Transfer Pad */
+#define ESP_CMD_SATN          0x1a     /* Set ATN */
+#define ESP_CMD_RATN          0x1b     /* De-assert ATN */
+
+/* Group 3 commands:  ESP must be in the MSGOUT or MSGIN state and be connected
+ *                    to a target as the initiator for these commands to work.
+ */
+#define ESP_CMD_SMSG          0x20     /* Send message */
+#define ESP_CMD_SSTAT         0x21     /* Send status */
+#define ESP_CMD_SDATA         0x22     /* Send data */
+#define ESP_CMD_DSEQ          0x23     /* Discontinue Sequence */
+#define ESP_CMD_TSEQ          0x24     /* Terminate Sequence */
+#define ESP_CMD_TCCSEQ        0x25     /* Target cmd cmplt sequence */
+#define ESP_CMD_DCNCT         0x27     /* Disconnect */
+#define ESP_CMD_RMSG          0x28     /* Receive Message */
+#define ESP_CMD_RCMD          0x29     /* Receive Command */
+#define ESP_CMD_RDATA         0x2a     /* Receive Data */
+#define ESP_CMD_RCSEQ         0x2b     /* Receive cmd sequence */
+
+/* Group 4 commands:  The ESP must be in the disconnected state and must
+ *                    not be connected to any targets as initiator for
+ *                    these commands to work.
+ */
+#define ESP_CMD_RSEL          0x40     /* Reselect */
+#define ESP_CMD_SEL           0x41     /* Select w/o ATN */
+#define ESP_CMD_SELA          0x42     /* Select w/ATN */
+#define ESP_CMD_SELAS         0x43     /* Select w/ATN & STOP */
+#define ESP_CMD_ESEL          0x44     /* Enable selection */
+#define ESP_CMD_DSEL          0x45     /* Disable selections */
+#define ESP_CMD_SA3           0x46     /* Select w/ATN3 */
+#define ESP_CMD_RSEL3         0x47     /* Reselect3 */
+
+/* This bit enables the ESP's DMA on the SBus */
+#define ESP_CMD_DMA           0x80     /* Do DMA? */
+
+/* ESP status register read-only */
+#define ESP_STAT_PIO          0x01     /* IO phase bit */
+#define ESP_STAT_PCD          0x02     /* CD phase bit */
+#define ESP_STAT_PMSG         0x04     /* MSG phase bit */
+#define ESP_STAT_PMASK        0x07     /* Mask of phase bits */
+#define ESP_STAT_TDONE        0x08     /* Transfer Completed */
+#define ESP_STAT_TCNT         0x10     /* Transfer Counter Is Zero */
+#define ESP_STAT_PERR         0x20     /* Parity error */
+#define ESP_STAT_SPAM         0x40     /* Real bad error */
+/* This indicates the 'interrupt pending' condition on esp236, it is a reserved
+ * bit on other revs of the ESP.
+ */
+#define ESP_STAT_INTR         0x80             /* Interrupt */
+
+/* The status register can be masked with ESP_STAT_PMASK and compared
+ * with the following values to determine the current phase the ESP
+ * (at least thinks it) is in.  For our purposes we also add our own
+ * software 'done' bit for our phase management engine.
+ */
+#define ESP_DOP   (0)                                       /* Data Out  */
+#define ESP_DIP   (ESP_STAT_PIO)                            /* Data In   */
+#define ESP_CMDP  (ESP_STAT_PCD)                            /* Command   */
+#define ESP_STATP (ESP_STAT_PCD|ESP_STAT_PIO)               /* Status    */
+#define ESP_MOP   (ESP_STAT_PMSG|ESP_STAT_PCD)              /* Message Out */
+#define ESP_MIP   (ESP_STAT_PMSG|ESP_STAT_PCD|ESP_STAT_PIO) /* Message In */
+
+/* HME only: status 2 register */
+#define ESP_STAT2_SCHBIT      0x01 /* Upper bits 3-7 of sstep enabled */
+#define ESP_STAT2_FFLAGS      0x02 /* The fifo flags are now latched */
+#define ESP_STAT2_XCNT        0x04 /* The transfer counter is latched */
+#define ESP_STAT2_CREGA       0x08 /* The command reg is active now */
+#define ESP_STAT2_WIDE        0x10 /* Interface on this adapter is wide */
+#define ESP_STAT2_F1BYTE      0x20 /* There is one byte at top of fifo */
+#define ESP_STAT2_FMSB        0x40 /* Next byte in fifo is most significant */
+#define ESP_STAT2_FEMPTY      0x80 /* FIFO is empty */
+
+/* ESP interrupt register read-only */
+#define ESP_INTR_S            0x01     /* Select w/o ATN */
+#define ESP_INTR_SATN         0x02     /* Select w/ATN */
+#define ESP_INTR_RSEL         0x04     /* Reselected */
+#define ESP_INTR_FDONE        0x08     /* Function done */
+#define ESP_INTR_BSERV        0x10     /* Bus service */
+#define ESP_INTR_DC           0x20     /* Disconnect */
+#define ESP_INTR_IC           0x40     /* Illegal command given */
+#define ESP_INTR_SR           0x80     /* SCSI bus reset detected */
+
+/* ESP sequence step register read-only */
+#define ESP_STEP_VBITS        0x07     /* Valid bits */
+#define ESP_STEP_ASEL         0x00     /* Selection&Arbitrate cmplt */
+#define ESP_STEP_SID          0x01     /* One msg byte sent */
+#define ESP_STEP_NCMD         0x02     /* Was not in command phase */
+#define ESP_STEP_PPC          0x03     /* Early phase chg caused cmnd
+                                        * bytes to be lost
+                                        */
+#define ESP_STEP_FINI4        0x04     /* Command was sent ok */
+
+/* Ho hum, some ESP's set the step register to this as well... */
+#define ESP_STEP_FINI5        0x05
+#define ESP_STEP_FINI6        0x06
+#define ESP_STEP_FINI7        0x07
+
+/* ESP chip-test register read-write */
+#define ESP_TEST_TARG         0x01     /* Target test mode */
+#define ESP_TEST_INI          0x02     /* Initiator test mode */
+#define ESP_TEST_TS           0x04     /* Tristate test mode */
+
+/* ESP unique ID register read-only, found on fas236+fas100a only */
+#define ESP_UID_F100A         0x00     /* ESP FAS100A  */
+#define ESP_UID_F236          0x02     /* ESP FAS236   */
+#define ESP_UID_REV           0x07     /* ESP revision */
+#define ESP_UID_FAM           0xf8     /* ESP family   */
+
+/* ESP fifo flags register read-only */
+/* Note that the following implies a 16 byte FIFO on the ESP. */
+#define ESP_FF_FBYTES         0x1f     /* Num bytes in FIFO */
+#define ESP_FF_ONOTZERO       0x20     /* offset ctr not zero (esp100) */
+#define ESP_FF_SSTEP          0xe0     /* Sequence step */
+
+/* ESP clock conversion factor register write-only */
+#define ESP_CCF_F0            0x00     /* 35.01MHz - 40MHz */
+#define ESP_CCF_NEVER         0x01     /* Set it to this and die */
+#define ESP_CCF_F2            0x02     /* 10MHz */
+#define ESP_CCF_F3            0x03     /* 10.01MHz - 15MHz */
+#define ESP_CCF_F4            0x04     /* 15.01MHz - 20MHz */
+#define ESP_CCF_F5            0x05     /* 20.01MHz - 25MHz */
+#define ESP_CCF_F6            0x06     /* 25.01MHz - 30MHz */
+#define ESP_CCF_F7            0x07     /* 30.01MHz - 35MHz */
+
+/* HME only... */
+#define ESP_BUSID_RESELID     0x10
+#define ESP_BUSID_CTR32BIT    0x40
+
+#define ESP_BUS_TIMEOUT        250     /* In milli-seconds */
+#define ESP_TIMEO_CONST       8192
+#define ESP_NEG_DEFP(mhz, cfact) \
+        ((ESP_BUS_TIMEOUT * ((mhz) / 1000)) / (8192 * (cfact)))
+#define ESP_MHZ_TO_CYCLE(mhertz)  ((1000000000) / ((mhertz) / 1000))
+#define ESP_TICK(ccf, cycle)  ((7682 * (ccf) * (cycle) / 1000))
+
+/* For slow to medium speed input clock rates we shoot for 5mb/s, but for high
+ * input clock rates we try to do 10mb/s although I don't think a transfer can
+ * even run that fast with an ESP even with DMA2 scatter gather pipelining.
+ */
+#define SYNC_DEFP_SLOW            0x32   /* 5mb/s  */
+#define SYNC_DEFP_FAST            0x19   /* 10mb/s */
+
+struct esp_cmd_priv {
+	union {
+		dma_addr_t	dma_addr;
+		int		num_sg;
+	} u;
+
+	unsigned int		cur_residue;
+	struct scatterlist	*cur_sg;
+	unsigned int		tot_residue;
+};
+#define ESP_CMD_PRIV(CMD)	((struct esp_cmd_priv *)(&(CMD)->SCp))
+
+enum esp_rev {
+	ESP100     = 0x00,  /* NCR53C90 - very broken */
+	ESP100A    = 0x01,  /* NCR53C90A */
+	ESP236     = 0x02,
+	FAS236     = 0x03,
+	FAS100A    = 0x04,
+	FAST       = 0x05,
+	FASHME     = 0x06,
+};
+
+struct esp_cmd_entry {
+	struct list_head	list;
+
+	struct scsi_cmnd	*cmd;
+
+	unsigned int		saved_cur_residue;
+	struct scatterlist	*saved_cur_sg;
+	unsigned int		saved_tot_residue;
+
+	u8			flags;
+#define ESP_CMD_FLAG_WRITE	0x01 /* DMA is a write */
+#define ESP_CMD_FLAG_ABORT	0x02 /* being aborted */
+#define ESP_CMD_FLAG_AUTOSENSE	0x04 /* Doing automatic REQUEST_SENSE */
+
+	u8			tag[2];
+
+	u8			status;
+	u8			message;
+
+	unsigned char		*sense_ptr;
+	unsigned char		*saved_sense_ptr;
+	dma_addr_t		sense_dma;
+
+	struct completion	*eh_done;
+};
+
+/* XXX make this configurable somehow XXX */
+#define ESP_DEFAULT_TAGS	16
+
+#define ESP_MAX_TARGET		16
+#define ESP_MAX_LUN		8
+#define ESP_MAX_TAG		256
+
+struct esp_lun_data {
+	struct esp_cmd_entry	*non_tagged_cmd;
+	int			num_tagged;
+	int			hold;
+	struct esp_cmd_entry	*tagged_cmds[ESP_MAX_TAG];
+};
+
+struct esp_target_data {
+	/* These are the ESP_STP, ESP_SOFF, and ESP_CFG3 register values which
+	 * match the currently negotiated settings for this target.  The SCSI
+	 * protocol values are maintained in spi_{offset,period,wide}(starget).
+	 */
+	u8			esp_period;
+	u8			esp_offset;
+	u8			esp_config3;
+
+	u8			flags;
+#define ESP_TGT_WIDE		0x01
+#define ESP_TGT_DISCONNECT	0x02
+#define ESP_TGT_NEGO_WIDE	0x04
+#define ESP_TGT_NEGO_SYNC	0x08
+#define ESP_TGT_CHECK_NEGO	0x40
+#define ESP_TGT_BROKEN		0x80
+
+	/* When ESP_TGT_CHECK_NEGO is set, on the next scsi command to this
+	 * device we will try to negotiate the following parameters.
+	 */
+	u8			nego_goal_period;
+	u8			nego_goal_offset;
+	u8			nego_goal_width;
+	u8			nego_goal_tags;
+
+	struct scsi_target	*starget;
+};
+
+struct esp_event_ent {
+	u8			type;
+#define ESP_EVENT_TYPE_EVENT	0x01
+#define ESP_EVENT_TYPE_CMD	0x02
+	u8			val;
+
+	u8			sreg;
+	u8			seqreg;
+	u8			sreg2;
+	u8			ireg;
+	u8			select_state;
+	u8			event;
+	u8			__pad;
+};
+
+struct esp;
+struct esp_driver_ops {
+	/* Read and write the ESP 8-bit registers.  On some
+	 * applications of the ESP chip the registers are at 4-byte
+	 * instead of 1-byte intervals.
+	 */
+	void (*esp_write8)(struct esp *esp, u8 val, unsigned long reg);
+	u8 (*esp_read8)(struct esp *esp, unsigned long reg);
+
+	/* Map and unmap DMA memory.  Eventually the driver will be
+	 * converted to the generic DMA API as soon as SBUS is able to
+	 * cope with that.  At such time we can remove this.
+	 */
+	dma_addr_t (*map_single)(struct esp *esp, void *buf,
+				 size_t sz, int dir);
+	int (*map_sg)(struct esp *esp, struct scatterlist *sg,
+		      int num_sg, int dir);
+	void (*unmap_single)(struct esp *esp, dma_addr_t addr,
+			     size_t sz, int dir);
+	void (*unmap_sg)(struct esp *esp, struct scatterlist *sg,
+			 int num_sg, int dir);
+
+	/* Return non-zero if there is an IRQ pending.  Usually this
+	 * status bit lives in the DMA controller sitting in front of
+	 * the ESP.  This has to be accurate or else the ESP interrupt
+	 * handler will not run.
+	 */
+	int (*irq_pending)(struct esp *esp);
+
+	/* Reset the DMA engine entirely.  On return, ESP interrupts
+	 * should be enabled.  Often the interrupt enabling is
+	 * controlled in the DMA engine.
+	 */
+	void (*reset_dma)(struct esp *esp);
+
+	/* Drain any pending DMA in the DMA engine after a transfer.
+	 * This is for writes to memory.
+	 */
+	void (*dma_drain)(struct esp *esp);
+
+	/* Invalidate the DMA engine after a DMA transfer.  */
+	void (*dma_invalidate)(struct esp *esp);
+
+	/* Setup an ESP command that will use a DMA transfer.
+	 * The 'esp_count' specifies what transfer length should be
+	 * programmed into the ESP transfer counter registers, whereas
+	 * the 'dma_count' is the length that should be programmed into
+	 * the DMA controller.  Usually they are the same.  If 'write'
+	 * is non-zero, this transfer is a write into memory.  'cmd'
+	 * holds the ESP command that should be issued by calling
+	 * scsi_esp_cmd() at the appropriate time while programming
+	 * the DMA hardware.
+	 */
+	void (*send_dma_cmd)(struct esp *esp, u32 dma_addr, u32 esp_count,
+			     u32 dma_count, int write, u8 cmd);
+
+	/* Return non-zero if the DMA engine is reporting an error
+	 * currently.
+	 */
+	int (*dma_error)(struct esp *esp);
+};
+
+#define ESP_MAX_MSG_SZ		8
+#define ESP_EVENT_LOG_SZ	32
+
+#define ESP_QUICKIRQ_LIMIT	100
+#define ESP_RESELECT_TAG_LIMIT	2500
+
+struct esp {
+	void __iomem		*regs;
+	void __iomem		*dma_regs;
+
+	const struct esp_driver_ops *ops;
+
+	struct Scsi_Host	*host;
+	void			*dev;
+
+	struct esp_cmd_entry	*active_cmd;
+
+	struct list_head	queued_cmds;
+	struct list_head	active_cmds;
+
+	u8			*command_block;
+	dma_addr_t		command_block_dma;
+
+	unsigned int		data_dma_len;
+
+	/* The following are used to determine the cause of an IRQ. Upon every
+	 * IRQ entry we synchronize these with the hardware registers.
+	 */
+	u8			sreg;
+	u8			seqreg;
+	u8			sreg2;
+	u8			ireg;
+
+	u32			prev_hme_dmacsr;
+	u8			prev_soff;
+	u8			prev_stp;
+	u8			prev_cfg3;
+	u8			__pad;
+
+	struct list_head	esp_cmd_pool;
+
+	struct esp_target_data	target[ESP_MAX_TARGET];
+
+	int			fifo_cnt;
+	u8			fifo[16];
+
+	struct esp_event_ent	esp_event_log[ESP_EVENT_LOG_SZ];
+	int			esp_event_cur;
+
+	u8			msg_out[ESP_MAX_MSG_SZ];
+	int			msg_out_len;
+
+	u8			msg_in[ESP_MAX_MSG_SZ];
+	int			msg_in_len;
+
+	u8			bursts;
+	u8			config1;
+	u8			config2;
+
+	u8			scsi_id;
+	u32			scsi_id_mask;
+
+	enum esp_rev		rev;
+
+	u32			flags;
+#define ESP_FLAG_DIFFERENTIAL	0x00000001
+#define ESP_FLAG_RESETTING	0x00000002
+#define ESP_FLAG_DOING_SLOWCMD	0x00000004
+#define ESP_FLAG_WIDE_CAPABLE	0x00000008
+#define ESP_FLAG_QUICKIRQ_CHECK	0x00000010
+
+	u8			select_state;
+#define ESP_SELECT_NONE		0x00 /* Not selecting */
+#define ESP_SELECT_BASIC	0x01 /* Select w/o MSGOUT phase */
+#define ESP_SELECT_MSGOUT	0x02 /* Select with MSGOUT */
+
+	/* When we are not selecting, we are expecting an event.  */
+	u8			event;
+#define ESP_EVENT_NONE		0x00
+#define ESP_EVENT_CMD_START	0x01
+#define ESP_EVENT_CMD_DONE	0x02
+#define ESP_EVENT_DATA_IN	0x03
+#define ESP_EVENT_DATA_OUT	0x04
+#define ESP_EVENT_DATA_DONE	0x05
+#define ESP_EVENT_MSGIN		0x06
+#define ESP_EVENT_MSGIN_MORE	0x07
+#define ESP_EVENT_MSGIN_DONE	0x08
+#define ESP_EVENT_MSGOUT	0x09
+#define ESP_EVENT_MSGOUT_DONE	0x0a
+#define ESP_EVENT_STATUS	0x0b
+#define ESP_EVENT_FREE_BUS	0x0c
+#define ESP_EVENT_CHECK_PHASE	0x0d
+#define ESP_EVENT_RESET		0x10
+
+	/* Probed in esp_get_clock_params() */
+	u32			cfact;
+	u32			cfreq;
+	u32			ccycle;
+	u32			ctick;
+	u32			neg_defp;
+	u32			sync_defp;
+
+	/* Computed in esp_reset_esp() */
+	u32			max_period;
+	u32			min_period;
+	u32			radelay;
+
+	/* Slow command state.  */
+	u8			*cmd_bytes_ptr;
+	int			cmd_bytes_left;
+
+	struct completion	*eh_reset;
+
+	struct sbus_dma		*dma;
+};
+
+#define host_to_esp(host)	((struct esp *)(host)->hostdata)
+
+/* A front-end driver for the ESP chip should do the following in
+ * it's device probe routine:
+ * 1) Allocate the host and private area using scsi_host_alloc()
+ *    with size 'sizeof(struct esp)'.  The first argument to
+ *    scsi_host_alloc() should be &scsi_esp_template.
+ * 2) Set host->max_id as appropriate.
+ * 3) Set esp->host to the scsi_host itself, and esp->dev
+ *    to the device object pointer.
+ * 4) Hook up esp->ops to the front-end implementation.
+ * 5) If the ESP chip supports wide transfers, set ESP_FLAG_WIDE_CAPABLE
+ *    in esp->flags.
+ * 6) Map the DMA and ESP chip registers.
+ * 7) DMA map the ESP command block, store the DMA address
+ *    in esp->command_block_dma.
+ * 8) Register the scsi_esp_intr() interrupt handler.
+ * 9) Probe for and provide the following chip properties:
+ *    esp->scsi_id (assign to esp->host->this_id too)
+ *    esp->scsi_id_mask
+ *    If ESP bus is differential, set ESP_FLAG_DIFFERENTIAL
+ *    esp->cfreq
+ *    DMA burst bit mask in esp->bursts, if necessary
+ * 10) Perform any actions necessary before the ESP device can
+ *     be programmed for the first time.  On some configs, for
+ *     example, the DMA engine has to be reset before ESP can
+ *     be programmed.
+ * 11) If necessary, call dev_set_drvdata() as needed.
+ * 12) Call scsi_esp_register() with prepared 'esp' structure
+ *     and a device pointer if possible.
+ * 13) Check scsi_esp_register() return value, release all resources
+ *     if an error was returned.
+ */
+extern struct scsi_host_template scsi_esp_template;
+extern int scsi_esp_register(struct esp *, struct device *);
+
+extern void scsi_esp_unregister(struct esp *);
+extern irqreturn_t scsi_esp_intr(int, void *);
+extern void scsi_esp_cmd(struct esp *, u8);
+
+#endif /* !(_ESP_SCSI_H) */
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index 9f10689905a..c4195ea869e 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -1403,7 +1403,7 @@ static int __devinit qpti_sbus_probe(struct of_device *dev, const struct of_devi
 	struct scsi_host_template *tpnt = match->data;
 	struct Scsi_Host *host;
 	struct qlogicpti *qpti;
-	char *fcode;
+	const char *fcode;
 
 	/* Sometimes Antares cards come up not completely
 	 * setup, and we get a report of a zero IRQ.
diff --git a/drivers/scsi/sun_esp.c b/drivers/scsi/sun_esp.c
new file mode 100644
index 00000000000..8c766bcd109
--- /dev/null
+++ b/drivers/scsi/sun_esp.c
@@ -0,0 +1,634 @@
+/* sun_esp.c: ESP front-end for Sparc SBUS systems.
+ *
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#include <asm/sbus.h>
+
+#include <scsi/scsi_host.h>
+
+#include "esp_scsi.h"
+
+#define DRV_MODULE_NAME		"sun_esp"
+#define PFX DRV_MODULE_NAME	": "
+#define DRV_VERSION		"1.000"
+#define DRV_MODULE_RELDATE	"April 19, 2007"
+
+#define dma_read32(REG) \
+	sbus_readl(esp->dma_regs + (REG))
+#define dma_write32(VAL, REG) \
+	sbus_writel((VAL), esp->dma_regs + (REG))
+
+static int __devinit esp_sbus_find_dma(struct esp *esp, struct sbus_dev *dma_sdev)
+{
+	struct sbus_dev *sdev = esp->dev;
+	struct sbus_dma *dma;
+
+	if (dma_sdev != NULL) {
+		for_each_dvma(dma) {
+			if (dma->sdev == dma_sdev)
+				break;
+		}
+	} else {
+		for_each_dvma(dma) {
+			if (dma->sdev == NULL)
+				break;
+
+			/* If bus + slot are the same and it has the
+			 * correct OBP name, it's ours.
+			 */
+			if (sdev->bus == dma->sdev->bus &&
+			    sdev->slot == dma->sdev->slot &&
+			    (!strcmp(dma->sdev->prom_name, "dma") ||
+			     !strcmp(dma->sdev->prom_name, "espdma")))
+				break;
+		}
+	}
+
+	if (dma == NULL) {
+		printk(KERN_ERR PFX "[%s] Cannot find dma.\n",
+		       sdev->ofdev.node->full_name);
+		return -ENODEV;
+	}
+	esp->dma = dma;
+	esp->dma_regs = dma->regs;
+
+	return 0;
+
+}
+
+static int __devinit esp_sbus_map_regs(struct esp *esp, int hme)
+{
+	struct sbus_dev *sdev = esp->dev;
+	struct resource *res;
+
+	/* On HME, two reg sets exist, first is DVMA,
+	 * second is ESP registers.
+	 */
+	if (hme)
+		res = &sdev->resource[1];
+	else
+		res = &sdev->resource[0];
+
+	esp->regs = sbus_ioremap(res, 0, SBUS_ESP_REG_SIZE, "ESP");
+	if (!esp->regs)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int __devinit esp_sbus_map_command_block(struct esp *esp)
+{
+	struct sbus_dev *sdev = esp->dev;
+
+	esp->command_block = sbus_alloc_consistent(sdev, 16,
+						   &esp->command_block_dma);
+	if (!esp->command_block)
+		return -ENOMEM;
+	return 0;
+}
+
+static int __devinit esp_sbus_register_irq(struct esp *esp)
+{
+	struct Scsi_Host *host = esp->host;
+	struct sbus_dev *sdev = esp->dev;
+
+	host->irq = sdev->irqs[0];
+	return request_irq(host->irq, scsi_esp_intr, IRQF_SHARED, "ESP", esp);
+}
+
+static void __devinit esp_get_scsi_id(struct esp *esp)
+{
+	struct sbus_dev *sdev = esp->dev;
+	struct device_node *dp = sdev->ofdev.node;
+
+	esp->scsi_id = of_getintprop_default(dp, "initiator-id", 0xff);
+	if (esp->scsi_id != 0xff)
+		goto done;
+
+	esp->scsi_id = of_getintprop_default(dp, "scsi-initiator-id", 0xff);
+	if (esp->scsi_id != 0xff)
+		goto done;
+
+	if (!sdev->bus) {
+		/* SUN4 */
+		esp->scsi_id = 7;
+		goto done;
+	}
+
+	esp->scsi_id = of_getintprop_default(sdev->bus->ofdev.node,
+					     "scsi-initiator-id", 7);
+
+done:
+	esp->host->this_id = esp->scsi_id;
+	esp->scsi_id_mask = (1 << esp->scsi_id);
+}
+
+static void __devinit esp_get_differential(struct esp *esp)
+{
+	struct sbus_dev *sdev = esp->dev;
+	struct device_node *dp = sdev->ofdev.node;
+
+	if (of_find_property(dp, "differential", NULL))
+		esp->flags |= ESP_FLAG_DIFFERENTIAL;
+	else
+		esp->flags &= ~ESP_FLAG_DIFFERENTIAL;
+}
+
+static void __devinit esp_get_clock_params(struct esp *esp)
+{
+	struct sbus_dev *sdev = esp->dev;
+	struct device_node *dp = sdev->ofdev.node;
+	struct device_node *bus_dp;
+	int fmhz;
+
+	bus_dp = NULL;
+	if (sdev != NULL && sdev->bus != NULL)
+		bus_dp = sdev->bus->ofdev.node;
+
+	fmhz = of_getintprop_default(dp, "clock-frequency", 0);
+	if (fmhz == 0)
+		fmhz = (!bus_dp) ? 0 :
+			of_getintprop_default(bus_dp, "clock-frequency", 0);
+
+	esp->cfreq = fmhz;
+}
+
+static void __devinit esp_get_bursts(struct esp *esp, struct sbus_dev *dma)
+{
+	struct sbus_dev *sdev = esp->dev;
+	struct device_node *dp = sdev->ofdev.node;
+	u8 bursts;
+
+	bursts = of_getintprop_default(dp, "burst-sizes", 0xff);
+	if (dma) {
+		struct device_node *dma_dp = dma->ofdev.node;
+		u8 val = of_getintprop_default(dma_dp, "burst-sizes", 0xff);
+		if (val != 0xff)
+			bursts &= val;
+	}
+
+	if (sdev->bus) {
+		u8 val = of_getintprop_default(sdev->bus->ofdev.node,
+					       "burst-sizes", 0xff);
+		if (val != 0xff)
+			bursts &= val;
+	}
+
+	if (bursts == 0xff ||
+	    (bursts & DMA_BURST16) == 0 ||
+	    (bursts & DMA_BURST32) == 0)
+		bursts = (DMA_BURST32 - 1);
+
+	esp->bursts = bursts;
+}
+
+static void __devinit esp_sbus_get_props(struct esp *esp, struct sbus_dev *espdma)
+{
+	esp_get_scsi_id(esp);
+	esp_get_differential(esp);
+	esp_get_clock_params(esp);
+	esp_get_bursts(esp, espdma);
+}
+
+static void sbus_esp_write8(struct esp *esp, u8 val, unsigned long reg)
+{
+	sbus_writeb(val, esp->regs + (reg * 4UL));
+}
+
+static u8 sbus_esp_read8(struct esp *esp, unsigned long reg)
+{
+	return sbus_readb(esp->regs + (reg * 4UL));
+}
+
+static dma_addr_t sbus_esp_map_single(struct esp *esp, void *buf,
+				      size_t sz, int dir)
+{
+	return sbus_map_single(esp->dev, buf, sz, dir);
+}
+
+static int sbus_esp_map_sg(struct esp *esp, struct scatterlist *sg,
+				  int num_sg, int dir)
+{
+	return sbus_map_sg(esp->dev, sg, num_sg, dir);
+}
+
+static void sbus_esp_unmap_single(struct esp *esp, dma_addr_t addr,
+				  size_t sz, int dir)
+{
+	sbus_unmap_single(esp->dev, addr, sz, dir);
+}
+
+static void sbus_esp_unmap_sg(struct esp *esp, struct scatterlist *sg,
+			      int num_sg, int dir)
+{
+	sbus_unmap_sg(esp->dev, sg, num_sg, dir);
+}
+
+static int sbus_esp_irq_pending(struct esp *esp)
+{
+	if (dma_read32(DMA_CSR) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
+		return 1;
+	return 0;
+}
+
+static void sbus_esp_reset_dma(struct esp *esp)
+{
+	int can_do_burst16, can_do_burst32, can_do_burst64;
+	int can_do_sbus64, lim;
+	u32 val;
+
+	can_do_burst16 = (esp->bursts & DMA_BURST16) != 0;
+	can_do_burst32 = (esp->bursts & DMA_BURST32) != 0;
+	can_do_burst64 = 0;
+	can_do_sbus64 = 0;
+	if (sbus_can_dma_64bit(esp->dev))
+		can_do_sbus64 = 1;
+	if (sbus_can_burst64(esp->sdev))
+		can_do_burst64 = (esp->bursts & DMA_BURST64) != 0;
+
+	/* Put the DVMA into a known state. */
+	if (esp->dma->revision != dvmahme) {
+		val = dma_read32(DMA_CSR);
+		dma_write32(val | DMA_RST_SCSI, DMA_CSR);
+		dma_write32(val & ~DMA_RST_SCSI, DMA_CSR);
+	}
+	switch (esp->dma->revision) {
+	case dvmahme:
+		dma_write32(DMA_RESET_FAS366, DMA_CSR);
+		dma_write32(DMA_RST_SCSI, DMA_CSR);
+
+		esp->prev_hme_dmacsr = (DMA_PARITY_OFF | DMA_2CLKS |
+					DMA_SCSI_DISAB | DMA_INT_ENAB);
+
+		esp->prev_hme_dmacsr &= ~(DMA_ENABLE | DMA_ST_WRITE |
+					  DMA_BRST_SZ);
+
+		if (can_do_burst64)
+			esp->prev_hme_dmacsr |= DMA_BRST64;
+		else if (can_do_burst32)
+			esp->prev_hme_dmacsr |= DMA_BRST32;
+
+		if (can_do_sbus64) {
+			esp->prev_hme_dmacsr |= DMA_SCSI_SBUS64;
+			sbus_set_sbus64(esp->dev, esp->bursts);
+		}
+
+		lim = 1000;
+		while (dma_read32(DMA_CSR) & DMA_PEND_READ) {
+			if (--lim == 0) {
+				printk(KERN_ALERT PFX "esp%d: DMA_PEND_READ "
+				       "will not clear!\n",
+				       esp->host->unique_id);
+				break;
+			}
+			udelay(1);
+		}
+
+		dma_write32(0, DMA_CSR);
+		dma_write32(esp->prev_hme_dmacsr, DMA_CSR);
+
+		dma_write32(0, DMA_ADDR);
+		break;
+
+	case dvmarev2:
+		if (esp->rev != ESP100) {
+			val = dma_read32(DMA_CSR);
+			dma_write32(val | DMA_3CLKS, DMA_CSR);
+		}
+		break;
+
+	case dvmarev3:
+		val = dma_read32(DMA_CSR);
+		val &= ~DMA_3CLKS;
+		val |= DMA_2CLKS;
+		if (can_do_burst32) {
+			val &= ~DMA_BRST_SZ;
+			val |= DMA_BRST32;
+		}
+		dma_write32(val, DMA_CSR);
+		break;
+
+	case dvmaesc1:
+		val = dma_read32(DMA_CSR);
+		val |= DMA_ADD_ENABLE;
+		val &= ~DMA_BCNT_ENAB;
+		if (!can_do_burst32 && can_do_burst16) {
+			val |= DMA_ESC_BURST;
+		} else {
+			val &= ~(DMA_ESC_BURST);
+		}
+		dma_write32(val, DMA_CSR);
+		break;
+
+	default:
+		break;
+	}
+
+	/* Enable interrupts.  */
+	val = dma_read32(DMA_CSR);
+	dma_write32(val | DMA_INT_ENAB, DMA_CSR);
+}
+
+static void sbus_esp_dma_drain(struct esp *esp)
+{
+	u32 csr;
+	int lim;
+
+	if (esp->dma->revision == dvmahme)
+		return;
+
+	csr = dma_read32(DMA_CSR);
+	if (!(csr & DMA_FIFO_ISDRAIN))
+		return;
+
+	if (esp->dma->revision != dvmarev3 && esp->dma->revision != dvmaesc1)
+		dma_write32(csr | DMA_FIFO_STDRAIN, DMA_CSR);
+
+	lim = 1000;
+	while (dma_read32(DMA_CSR) & DMA_FIFO_ISDRAIN) {
+		if (--lim == 0) {
+			printk(KERN_ALERT PFX "esp%d: DMA will not drain!\n",
+			       esp->host->unique_id);
+			break;
+		}
+		udelay(1);
+	}
+}
+
+static void sbus_esp_dma_invalidate(struct esp *esp)
+{
+	if (esp->dma->revision == dvmahme) {
+		dma_write32(DMA_RST_SCSI, DMA_CSR);
+
+		esp->prev_hme_dmacsr = ((esp->prev_hme_dmacsr |
+					 (DMA_PARITY_OFF | DMA_2CLKS |
+					  DMA_SCSI_DISAB | DMA_INT_ENAB)) &
+					~(DMA_ST_WRITE | DMA_ENABLE));
+
+		dma_write32(0, DMA_CSR);
+		dma_write32(esp->prev_hme_dmacsr, DMA_CSR);
+
+		/* This is necessary to avoid having the SCSI channel
+		 * engine lock up on us.
+		 */
+		dma_write32(0, DMA_ADDR);
+	} else {
+		u32 val;
+		int lim;
+
+		lim = 1000;
+		while ((val = dma_read32(DMA_CSR)) & DMA_PEND_READ) {
+			if (--lim == 0) {
+				printk(KERN_ALERT PFX "esp%d: DMA will not "
+				       "invalidate!\n", esp->host->unique_id);
+				break;
+			}
+			udelay(1);
+		}
+
+		val &= ~(DMA_ENABLE | DMA_ST_WRITE | DMA_BCNT_ENAB);
+		val |= DMA_FIFO_INV;
+		dma_write32(val, DMA_CSR);
+		val &= ~DMA_FIFO_INV;
+		dma_write32(val, DMA_CSR);
+	}
+}
+
+static void sbus_esp_send_dma_cmd(struct esp *esp, u32 addr, u32 esp_count,
+				  u32 dma_count, int write, u8 cmd)
+{
+	u32 csr;
+
+	BUG_ON(!(cmd & ESP_CMD_DMA));
+
+	sbus_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
+	sbus_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
+	if (esp->rev == FASHME) {
+		sbus_esp_write8(esp, (esp_count >> 16) & 0xff, FAS_RLO);
+		sbus_esp_write8(esp, 0, FAS_RHI);
+
+		scsi_esp_cmd(esp, cmd);
+
+		csr = esp->prev_hme_dmacsr;
+		csr |= DMA_SCSI_DISAB | DMA_ENABLE;
+		if (write)
+			csr |= DMA_ST_WRITE;
+		else
+			csr &= ~DMA_ST_WRITE;
+		esp->prev_hme_dmacsr = csr;
+
+		dma_write32(dma_count, DMA_COUNT);
+		dma_write32(addr, DMA_ADDR);
+		dma_write32(csr, DMA_CSR);
+	} else {
+		csr = dma_read32(DMA_CSR);
+		csr |= DMA_ENABLE;
+		if (write)
+			csr |= DMA_ST_WRITE;
+		else
+			csr &= ~DMA_ST_WRITE;
+		dma_write32(csr, DMA_CSR);
+		if (esp->dma->revision == dvmaesc1) {
+			u32 end = PAGE_ALIGN(addr + dma_count + 16U);
+			dma_write32(end - addr, DMA_COUNT);
+		}
+		dma_write32(addr, DMA_ADDR);
+
+		scsi_esp_cmd(esp, cmd);
+	}
+
+}
+
+static int sbus_esp_dma_error(struct esp *esp)
+{
+	u32 csr = dma_read32(DMA_CSR);
+
+	if (csr & DMA_HNDL_ERROR)
+		return 1;
+
+	return 0;
+}
+
+static const struct esp_driver_ops sbus_esp_ops = {
+	.esp_write8	=	sbus_esp_write8,
+	.esp_read8	=	sbus_esp_read8,
+	.map_single	=	sbus_esp_map_single,
+	.map_sg		=	sbus_esp_map_sg,
+	.unmap_single	=	sbus_esp_unmap_single,
+	.unmap_sg	=	sbus_esp_unmap_sg,
+	.irq_pending	=	sbus_esp_irq_pending,
+	.reset_dma	=	sbus_esp_reset_dma,
+	.dma_drain	=	sbus_esp_dma_drain,
+	.dma_invalidate	=	sbus_esp_dma_invalidate,
+	.send_dma_cmd	=	sbus_esp_send_dma_cmd,
+	.dma_error	=	sbus_esp_dma_error,
+};
+
+static int __devinit esp_sbus_probe_one(struct device *dev,
+					struct sbus_dev *esp_dev,
+					struct sbus_dev *espdma,
+					struct sbus_bus *sbus,
+					int hme)
+{
+	struct scsi_host_template *tpnt = &scsi_esp_template;
+	struct Scsi_Host *host;
+	struct esp *esp;
+	int err;
+
+	host = scsi_host_alloc(tpnt, sizeof(struct esp));
+
+	err = -ENOMEM;
+	if (!host)
+		goto fail;
+
+	host->max_id = (hme ? 16 : 8);
+	esp = host_to_esp(host);
+
+	esp->host = host;
+	esp->dev = esp_dev;
+	esp->ops = &sbus_esp_ops;
+
+	if (hme)
+		esp->flags |= ESP_FLAG_WIDE_CAPABLE;
+
+	err = esp_sbus_find_dma(esp, espdma);
+	if (err < 0)
+		goto fail_unlink;
+
+	err = esp_sbus_map_regs(esp, hme);
+	if (err < 0)
+		goto fail_unlink;
+
+	err = esp_sbus_map_command_block(esp);
+	if (err < 0)
+		goto fail_unmap_regs;
+
+	err = esp_sbus_register_irq(esp);
+	if (err < 0)
+		goto fail_unmap_command_block;
+
+	esp_sbus_get_props(esp, espdma);
+
+	/* Before we try to touch the ESP chip, ESC1 dma can
+	 * come up with the reset bit set, so make sure that
+	 * is clear first.
+	 */
+	if (esp->dma->revision == dvmaesc1) {
+		u32 val = dma_read32(DMA_CSR);
+
+		dma_write32(val & ~DMA_RST_SCSI, DMA_CSR);
+	}
+
+	dev_set_drvdata(&esp_dev->ofdev.dev, esp);
+
+	err = scsi_esp_register(esp, dev);
+	if (err)
+		goto fail_free_irq;
+
+	return 0;
+
+fail_free_irq:
+	free_irq(host->irq, esp);
+fail_unmap_command_block:
+	sbus_free_consistent(esp->dev, 16,
+			     esp->command_block,
+			     esp->command_block_dma);
+fail_unmap_regs:
+	sbus_iounmap(esp->regs, SBUS_ESP_REG_SIZE);
+fail_unlink:
+	scsi_host_put(host);
+fail:
+	return err;
+}
+
+static int __devinit esp_sbus_probe(struct of_device *dev, const struct of_device_id *match)
+{
+	struct sbus_dev *sdev = to_sbus_device(&dev->dev);
+	struct device_node *dp = dev->node;
+	struct sbus_dev *dma_sdev = NULL;
+	int hme = 0;
+
+	if (dp->parent &&
+	    (!strcmp(dp->parent->name, "espdma") ||
+	     !strcmp(dp->parent->name, "dma")))
+		dma_sdev = sdev->parent;
+	else if (!strcmp(dp->name, "SUNW,fas")) {
+		dma_sdev = sdev;
+		hme = 1;
+	}
+
+	return esp_sbus_probe_one(&dev->dev, sdev, dma_sdev,
+				  sdev->bus, hme);
+}
+
+static int __devexit esp_sbus_remove(struct of_device *dev)
+{
+	struct esp *esp = dev_get_drvdata(&dev->dev);
+	unsigned int irq = esp->host->irq;
+	u32 val;
+
+	scsi_esp_unregister(esp);
+
+	/* Disable interrupts.  */
+	val = dma_read32(DMA_CSR);
+	dma_write32(val & ~DMA_INT_ENAB, DMA_CSR);
+
+	free_irq(irq, esp);
+	sbus_free_consistent(esp->dev, 16,
+			     esp->command_block,
+			     esp->command_block_dma);
+	sbus_iounmap(esp->regs, SBUS_ESP_REG_SIZE);
+
+	scsi_host_put(esp->host);
+
+	return 0;
+}
+
+static struct of_device_id esp_match[] = {
+	{
+		.name = "SUNW,esp",
+	},
+	{
+		.name = "SUNW,fas",
+	},
+	{
+		.name = "esp",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, esp_match);
+
+static struct of_platform_driver esp_sbus_driver = {
+	.name		= "esp",
+	.match_table	= esp_match,
+	.probe		= esp_sbus_probe,
+	.remove		= __devexit_p(esp_sbus_remove),
+};
+
+static int __init sunesp_init(void)
+{
+	return of_register_driver(&esp_sbus_driver, &sbus_bus_type);
+}
+
+static void __exit sunesp_exit(void)
+{
+	of_unregister_driver(&esp_sbus_driver);
+}
+
+MODULE_DESCRIPTION("Sun ESP SCSI driver");
+MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_init(sunesp_init);
+module_exit(sunesp_exit);