aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
authorRoman Zippel <zippel@linux-m68k.org>2007-05-01 22:32:36 +0200
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-05-04 17:59:05 -0700
commitc28bda25175913c88396b643813321ef9cffe663 (patch)
tree0245b5b6fdd5914b68574359a8f1b10a8896c501 /drivers/scsi
parentfb810d121bceb945c5e576356bccba11cbfad7e3 (diff)
m68k: Reformat the Atari SCSI driver
Reformat the Atari SCSI driver Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/atari_NCR5380.c4387
-rw-r--r--drivers/scsi/atari_scsi.c361
2 files changed, 2373 insertions, 2375 deletions
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 1b4612c71ce..81e4f566b6c 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -1,19 +1,19 @@
-/*
+/*
* NCR 5380 generic driver routines. These should make it *trivial*
- * to implement 5380 SCSI drivers under Linux with a non-trantor
+ * to implement 5380 SCSI drivers under Linux with a non-trantor
* architecture.
*
* Note that these routines also work with NR53c400 family chips.
*
* Copyright 1993, Drew Eckhardt
- * Visionary Computing
+ * Visionary Computing
* (Unix and Linux consulting and custom programming)
- * drew@colorado.edu
+ * drew@colorado.edu
* +1 (303) 666-5836
*
- * DISTRIBUTION RELEASE 6.
+ * DISTRIBUTION RELEASE 6.
*
- * For more information, please consult
+ * For more information, please consult
*
* NCR 5380 Family
* SCSI Protocol Controller
@@ -57,7 +57,7 @@
* - I've deleted all the stuff for AUTOPROBE_IRQ, REAL_DMA_POLL, PSEUDO_DMA
* and USLEEP, because these were messing up readability and will never be
* needed for Atari SCSI.
- *
+ *
* - I've revised the NCR5380_main() calling scheme (relax the 'main_running'
* stuff), and 'main' is executed in a bottom half if awoken by an
* interrupt.
@@ -69,21 +69,29 @@
*/
/*
- * Further development / testing that should be done :
- * 1. Test linked command handling code after Eric is ready with
+ * Further development / testing that should be done :
+ * 1. Test linked command handling code after Eric is ready with
* the high level code.
*/
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_transport_spi.h>
#if (NDEBUG & NDEBUG_LISTS)
-#define LIST(x,y) \
- { printk("LINE:%d Adding %p to %p\n", __LINE__, (void*)(x), (void*)(y)); \
- if ((x)==(y)) udelay(5); }
-#define REMOVE(w,x,y,z) \
- { printk("LINE:%d Removing: %p->%p %p->%p \n", __LINE__, \
- (void*)(w), (void*)(x), (void*)(y), (void*)(z)); \
- if ((x)==(y)) udelay(5); }
+#define LIST(x, y) \
+ do { \
+ printk("LINE:%d Adding %p to %p\n", \
+ __LINE__, (void*)(x), (void*)(y)); \
+ if ((x) == (y)) \
+ udelay(5); \
+ } while (0)
+#define REMOVE(w, x, y, z) \
+ do { \
+ printk("LINE:%d Removing: %p->%p %p->%p \n", \
+ __LINE__, (void*)(w), (void*)(x), \
+ (void*)(y), (void*)(z)); \
+ if ((x) == (y)) \
+ udelay(5); \
+ } while (0)
#else
#define LIST(x,y)
#define REMOVE(w,x,y,z)
@@ -103,62 +111,62 @@
* more difficult than it has to be.
*
* Also, many of the SCSI drivers were written before the command queuing
- * routines were implemented, meaning their implementations of queued
+ * routines were implemented, meaning their implementations of queued
* commands were hacked on rather than designed in from the start.
*
- * When I designed the Linux SCSI drivers I figured that
+ * When I designed the Linux SCSI drivers I figured that
* while having two different SCSI boards in a system might be useful
* for debugging things, two of the same type wouldn't be used.
* Well, I was wrong and a number of users have mailed me about running
* multiple high-performance SCSI boards in a server.
*
- * Finally, when I get questions from users, I have no idea what
+ * Finally, when I get questions from users, I have no idea what
* revision of my driver they are running.
*
* This driver attempts to address these problems :
- * This is a generic 5380 driver. To use it on a different platform,
+ * This is a generic 5380 driver. To use it on a different platform,
* one simply writes appropriate system specific macros (ie, data
- * transfer - some PC's will use the I/O bus, 68K's must use
+ * transfer - some PC's will use the I/O bus, 68K's must use
* memory mapped) and drops this file in their 'C' wrapper.
*
- * As far as command queueing, two queues are maintained for
+ * As far as command queueing, two queues are maintained for
* each 5380 in the system - commands that haven't been issued yet,
- * and commands that are currently executing. This means that an
- * unlimited number of commands may be queued, letting
- * more commands propagate from the higher driver levels giving higher
- * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported,
- * allowing multiple commands to propagate all the way to a SCSI-II device
+ * and commands that are currently executing. This means that an
+ * unlimited number of commands may be queued, letting
+ * more commands propagate from the higher driver levels giving higher
+ * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported,
+ * allowing multiple commands to propagate all the way to a SCSI-II device
* while a command is already executing.
*
- * To solve the multiple-boards-in-the-same-system problem,
+ * To solve the multiple-boards-in-the-same-system problem,
* there is a separate instance structure for each instance
* of a 5380 in the system. So, multiple NCR5380 drivers will
* be able to coexist with appropriate changes to the high level
- * SCSI code.
+ * SCSI code.
*
* A NCR5380_PUBLIC_REVISION macro is provided, with the release
- * number (updated for each public release) printed by the
- * NCR5380_print_options command, which should be called from the
+ * number (updated for each public release) printed by the
+ * NCR5380_print_options command, which should be called from the
* wrapper detect function, so that I know what release of the driver
* users are using.
*
- * Issues specific to the NCR5380 :
+ * Issues specific to the NCR5380 :
*
- * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead
- * piece of hardware that requires you to sit in a loop polling for
- * the REQ signal as long as you are connected. Some devices are
- * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect
+ * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead
+ * piece of hardware that requires you to sit in a loop polling for
+ * the REQ signal as long as you are connected. Some devices are
+ * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect
* while doing long seek operations.
- *
+ *
* The workaround for this is to keep track of devices that have
* disconnected. If the device hasn't disconnected, for commands that
- * should disconnect, we do something like
+ * should disconnect, we do something like
*
* while (!REQ is asserted) { sleep for N usecs; poll for M usecs }
- *
- * Some tweaking of N and M needs to be done. An algorithm based
+ *
+ * Some tweaking of N and M needs to be done. An algorithm based
* on "time to data" would give the best results as long as short time
- * to datas (ie, on the same track) were considered, however these
+ * to datas (ie, on the same track) were considered, however these
* broken devices are the exception rather than the rule and I'd rather
* spend my time optimizing for the normal case.
*
@@ -167,9 +175,9 @@
* At the heart of the design is a coroutine, NCR5380_main,
* which is started when not running by the interrupt handler,
* timer, and queue command function. It attempts to establish
- * I_T_L or I_T_L_Q nexuses by removing the commands from the
- * issue queue and calling NCR5380_select() if a nexus
- * is not established.
+ * I_T_L or I_T_L_Q nexuses by removing the commands from the
+ * issue queue and calling NCR5380_select() if a nexus
+ * is not established.
*
* Once a nexus is established, the NCR5380_information_transfer()
* phase goes through the various phases as instructed by the target.
@@ -183,10 +191,10 @@
* calling NCR5380_intr() which will in turn call NCR5380_reselect
* to reestablish a nexus. This will run main if necessary.
*
- * On command termination, the done function will be called as
+ * On command termination, the done function will be called as
* appropriate.
*
- * SCSI pointers are maintained in the SCp field of SCSI command
+ * SCSI pointers are maintained in the SCp field of SCSI command
* structures, being initialized after the command is connected
* in NCR5380_select, and set as appropriate in NCR5380_information_transfer.
* Note that in violation of the standard, an implicit SAVE POINTERS operation
@@ -196,12 +204,12 @@
/*
* Using this file :
* This file a skeleton Linux SCSI driver for the NCR 5380 series
- * of chips. To use it, you write an architecture specific functions
+ * of chips. To use it, you write an architecture specific functions
* and macros and include this file in your driver.
*
- * These macros control options :
+ * These macros control options :
* AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
+ * for commands that return with a CHECK CONDITION status.
*
* LINKED - if defined, linked commands are supported.
*
@@ -210,18 +218,18 @@
* SUPPORT_TAGS - if defined, SCSI-2 tagged queuing is used where possible
*
* These macros MUST be defined :
- *
+ *
* NCR5380_read(register) - read from the specified register
*
- * NCR5380_write(register, value) - write to the specific register
+ * NCR5380_write(register, value) - write to the specific register
*
* Either real DMA *or* pseudo DMA may be implemented
- * REAL functions :
+ * REAL functions :
* NCR5380_REAL_DMA should be defined if real DMA is to be used.
- * Note that the DMA setup functions should return the number of bytes
+ * Note that the DMA setup functions should return the number of bytes
* that they were able to program the controller for.
*
- * Also note that generic i386/PC versions of these macros are
+ * Also note that generic i386/PC versions of these macros are
* available as NCR5380_i386_dma_write_setup,
* NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
*
@@ -234,14 +242,14 @@
* NCR5380_pread(instance, dst, count);
*
* If nothing specific to this implementation needs doing (ie, with external
- * hardware), you must also define
- *
+ * hardware), you must also define
+ *
* NCR5380_queue_command
* NCR5380_reset
* NCR5380_abort
* NCR5380_proc_info
*
- * to be the global entry points into the specific driver, ie
+ * to be the global entry points into the specific driver, ie
* #define NCR5380_queue_command t128_queue_command.
*
* If this is not done, the routines will be defined as static functions
@@ -249,7 +257,7 @@
* accessible wrapper function.
*
* The generic driver is initialized by calling NCR5380_init(instance),
- * after setting the appropriate host specific fields and ID. If the
+ * after setting the appropriate host specific fields and ID. If the
* driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
* possible) function may be used. Before the specific driver initialization
* code finishes, NCR5380_print_options should be called.
@@ -312,34 +320,34 @@ static struct scsi_host_template *the_template = NULL;
#define TAG_NONE 0xff
typedef struct {
- DECLARE_BITMAP(allocated, MAX_TAGS);
- int nr_allocated;
- int queue_size;
+ DECLARE_BITMAP(allocated, MAX_TAGS);
+ int nr_allocated;
+ int queue_size;
} TAG_ALLOC;
-static TAG_ALLOC TagAlloc[8][8]; /* 8 targets and 8 LUNs */
+static TAG_ALLOC TagAlloc[8][8]; /* 8 targets and 8 LUNs */
-static void __init init_tags( void )
+static void __init init_tags(void)
{
- int target, lun;
- TAG_ALLOC *ta;
-
- if (!setup_use_tagged_queuing)
- return;
-
- for( target = 0; target < 8; ++target ) {
- for( lun = 0; lun < 8; ++lun ) {
- ta = &TagAlloc[target][lun];
- bitmap_zero(ta->allocated, MAX_TAGS);
- ta->nr_allocated = 0;
- /* At the beginning, assume the maximum queue size we could
- * support (MAX_TAGS). This value will be decreased if the target
- * returns QUEUE_FULL status.
- */
- ta->queue_size = MAX_TAGS;
+ int target, lun;
+ TAG_ALLOC *ta;
+
+ if (!setup_use_tagged_queuing)
+ return;
+
+ for (target = 0; target < 8; ++target) {
+ for (lun = 0; lun < 8; ++lun) {
+ ta = &TagAlloc[target][lun];
+ bitmap_zero(ta->allocated, MAX_TAGS);
+ ta->nr_allocated = 0;
+ /* At the beginning, assume the maximum queue size we could
+ * support (MAX_TAGS). This value will be decreased if the target
+ * returns QUEUE_FULL status.
+ */
+ ta->queue_size = MAX_TAGS;
+ }
}
- }
}
@@ -348,24 +356,24 @@ static void __init init_tags( void )
* check that there is a free tag and the target's queue won't overflow. This
* function should be called with interrupts disabled to avoid race
* conditions.
- */
+ */
-static int is_lun_busy( Scsi_Cmnd *cmd, int should_be_tagged )
+static int is_lun_busy(Scsi_Cmnd *cmd, int should_be_tagged)
{
- SETUP_HOSTDATA(cmd->device->host);
-
- if (hostdata->busy[cmd->device->id] & (1 << cmd->device->lun))
- return( 1 );
- if (!should_be_tagged ||
- !setup_use_tagged_queuing || !cmd->device->tagged_supported)
- return( 0 );
- if (TagAlloc[cmd->device->id][cmd->device->lun].nr_allocated >=
- TagAlloc[cmd->device->id][cmd->device->lun].queue_size ) {
- TAG_PRINTK( "scsi%d: target %d lun %d: no free tags\n",
- H_NO(cmd), cmd->device->id, cmd->device->lun );
- return( 1 );
- }
- return( 0 );
+ SETUP_HOSTDATA(cmd->device->host);
+
+ if (hostdata->busy[cmd->device->id] & (1 << cmd->device->lun))
+ return 1;
+ if (!should_be_tagged ||
+ !setup_use_tagged_queuing || !cmd->device->tagged_supported)
+ return 0;
+ if (TagAlloc[cmd->device->id][cmd->device->lun].nr_allocated >=
+ TagAlloc[cmd->device->id][cmd->device->lun].queue_size) {
+ TAG_PRINTK("scsi%d: target %d lun %d: no free tags\n",
+ H_NO(cmd), cmd->device->id, cmd->device->lun);
+ return 1;
+ }
+ return 0;
}
@@ -374,31 +382,30 @@ static int is_lun_busy( Scsi_Cmnd *cmd, int should_be_tagged )
* untagged.
*/
-static void cmd_get_tag( Scsi_Cmnd *cmd, int should_be_tagged )
+static void cmd_get_tag(Scsi_Cmnd *cmd, int should_be_tagged)
{
- SETUP_HOSTDATA(cmd->device->host);
-
- /* If we or the target don't support tagged queuing, allocate the LUN for
- * an untagged command.
- */
- if (!should_be_tagged ||
- !setup_use_tagged_queuing || !cmd->device->tagged_supported) {
- cmd->tag = TAG_NONE;
- hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
- TAG_PRINTK( "scsi%d: target %d lun %d now allocated by untagged "
- "command\n", H_NO(cmd), cmd->device->id, cmd->device->lun );
- }
- else {
- TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
-
- cmd->tag = find_first_zero_bit( ta->allocated, MAX_TAGS );
- set_bit( cmd->tag, ta->allocated );
- ta->nr_allocated++;
- TAG_PRINTK( "scsi%d: using tag %d for target %d lun %d "
- "(now %d tags in use)\n",
- H_NO(cmd), cmd->tag, cmd->device->id, cmd->device->lun,
- ta->nr_allocated );
- }
+ SETUP_HOSTDATA(cmd->device->host);
+
+ /* If we or the target don't support tagged queuing, allocate the LUN for
+ * an untagged command.
+ */
+ if (!should_be_tagged ||
+ !setup_use_tagged_queuing || !cmd->device->tagged_supported) {
+ cmd->tag = TAG_NONE;
+ hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
+ TAG_PRINTK("scsi%d: target %d lun %d now allocated by untagged "
+ "command\n", H_NO(cmd), cmd->device->id, cmd->device->lun);
+ } else {
+ TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
+
+ cmd->tag = find_first_zero_bit(ta->allocated, MAX_TAGS);
+ set_bit(cmd->tag, ta->allocated);
+ ta->nr_allocated++;
+ TAG_PRINTK("scsi%d: using tag %d for target %d lun %d "
+ "(now %d tags in use)\n",
+ H_NO(cmd), cmd->tag, cmd->device->id,
+ cmd->device->lun, ta->nr_allocated);
+ }
}
@@ -406,44 +413,42 @@ static void cmd_get_tag( Scsi_Cmnd *cmd, int should_be_tagged )
* unlock the LUN.
*/
-static void cmd_free_tag( Scsi_Cmnd *cmd )
+static void cmd_free_tag(Scsi_Cmnd *cmd)
{
- SETUP_HOSTDATA(cmd->device->host);
-
- if (cmd->tag == TAG_NONE) {
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
- TAG_PRINTK( "scsi%d: target %d lun %d untagged cmd finished\n",
- H_NO(cmd), cmd->device->id, cmd->device->lun );
- }
- else if (cmd->tag >= MAX_TAGS) {
- printk(KERN_NOTICE "scsi%d: trying to free bad tag %d!\n",
- H_NO(cmd), cmd->tag );
- }
- else {
- TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
- clear_bit( cmd->tag, ta->allocated );
- ta->nr_allocated--;
- TAG_PRINTK( "scsi%d: freed tag %d for target %d lun %d\n",
- H_NO(cmd), cmd->tag, cmd->device->id, cmd->device->lun );
- }
+ SETUP_HOSTDATA(cmd->device->host);
+
+ if (cmd->tag == TAG_NONE) {
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
+ TAG_PRINTK("scsi%d: target %d lun %d untagged cmd finished\n",
+ H_NO(cmd), cmd->device->id, cmd->device->lun);
+ } else if (cmd->tag >= MAX_TAGS) {
+ printk(KERN_NOTICE "scsi%d: trying to free bad tag %d!\n",
+ H_NO(cmd), cmd->tag);
+ } else {
+ TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
+ clear_bit(cmd->tag, ta->allocated);
+ ta->nr_allocated--;
+ TAG_PRINTK("scsi%d: freed tag %d for target %d lun %d\n",
+ H_NO(cmd), cmd->tag, cmd->device->id, cmd->device->lun);
+ }
}
-static void free_all_tags( void )
+static void free_all_tags(void)
{
- int target, lun;
- TAG_ALLOC *ta;
-
- if (!setup_use_tagged_queuing)
- return;
-
- for( target = 0; target < 8; ++target ) {
- for( lun = 0; lun < 8; ++lun ) {
- ta = &TagAlloc[target][lun];
- bitmap_zero(ta->allocated, MAX_TAGS);
- ta->nr_allocated = 0;
+ int target, lun;
+ TAG_ALLOC *ta;
+
+ if (!setup_use_tagged_queuing)
+ return;
+
+ for (target = 0; target < 8; ++target) {
+ for (lun = 0; lun < 8; ++lun) {
+ ta = &TagAlloc[target][lun];
+ bitmap_zero(ta->allocated, MAX_TAGS);
+ ta->nr_allocated = 0;
+ }
}
- }
}
#endif /* SUPPORT_TAGS */
@@ -461,89 +466,94 @@ static void free_all_tags( void )
* assumed to be already transfered into ptr/this_residual.
*/
-static void merge_contiguous_buffers( Scsi_Cmnd *cmd )
+static void merge_contiguous_buffers(Scsi_Cmnd *cmd)
{
- unsigned long endaddr;
+ unsigned long endaddr;
#if (NDEBUG & NDEBUG_MERGING)
- unsigned long oldlen = cmd->SCp.this_residual;
- int cnt = 1;
+ unsigned long oldlen = cmd->SCp.this_residual;
+ int cnt = 1;
#endif
- for (endaddr = virt_to_phys(cmd->SCp.ptr + cmd->SCp.this_residual - 1) + 1;
- cmd->SCp.buffers_residual &&
- virt_to_phys(page_address(cmd->SCp.buffer[1].page)+
- cmd->SCp.buffer[1].offset) == endaddr; ) {
- MER_PRINTK("VTOP(%p) == %08lx -> merging\n",
- cmd->SCp.buffer[1].address, endaddr);
+ for (endaddr = virt_to_phys(cmd->SCp.ptr + cmd->SCp.this_residual - 1) + 1;
+ cmd->SCp.buffers_residual &&
+ virt_to_phys(page_address(cmd->SCp.buffer[1].page) +
+ cmd->SCp.buffer[1].offset) == endaddr;) {
+ MER_PRINTK("VTOP(%p) == %08lx -> merging\n",
+ cmd->SCp.buffer[1].address, endaddr);
#if (NDEBUG & NDEBUG_MERGING)
- ++cnt;
+ ++cnt;
#endif
- ++cmd->SCp.buffer;
- --cmd->SCp.buffers_residual;
- cmd->SCp.this_residual += cmd->SCp.buffer->length;
- endaddr += cmd->SCp.buffer->length;
- }
+ ++cmd->SCp.buffer;
+ --cmd->SCp.buffers_residual;
+ cmd->SCp.this_residual += cmd->SCp.buffer->length;
+ endaddr += cmd->SCp.buffer->length;
+ }
#if (NDEBUG & NDEBUG_MERGING)
- if (oldlen != cmd->SCp.this_residual)
- MER_PRINTK("merged %d buffers from %p, new length %08x\n",
- cnt, cmd->SCp.ptr, cmd->SCp.this_residual);
+ if (oldlen != cmd->SCp.this_residual)
+ MER_PRINTK("merged %d buffers from %p, new length %08x\n",
+ cnt, cmd->SCp.ptr, cmd->SCp.this_residual);
#endif
}
/*
* Function : void initialize_SCp(Scsi_Cmnd *cmd)
*
- * Purpose : initialize the saved data pointers for cmd to point to the
+ * Purpose : initialize the saved data pointers for cmd to point to the
* start of the buffer.
*
* Inputs : cmd - Scsi_Cmnd structure to have pointers reset.
*/
-static __inline__ void initialize_SCp(Scsi_Cmnd *cmd)
+static inline void initialize_SCp(Scsi_Cmnd *cmd)
{
- /*
- * Initialize the Scsi Pointer field so that all of the commands in the
- * various queues are valid.
- */
-
- if (cmd->use_sg) {
- cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer;
- cmd->SCp.buffers_residual = cmd->use_sg - 1;
- cmd->SCp.ptr = (char *)page_address(cmd->SCp.buffer->page)+
- cmd->SCp.buffer->offset;
- cmd->SCp.this_residual = cmd->SCp.buffer->length;
- /* ++roman: Try to merge some scatter-buffers if they are at
- * contiguous physical addresses.
+ /*
+ * Initialize the Scsi Pointer field so that all of the commands in the
+ * various queues are valid.
*/
- merge_contiguous_buffers( cmd );
- } else {
- cmd->SCp.buffer = NULL;
- cmd->SCp.buffers_residual = 0;
- cmd->SCp.ptr = (char *) cmd->request_buffer;
- cmd->SCp.this_residual = cmd->request_bufflen;
- }
+
+ if (cmd->use_sg) {
+ cmd->SCp.buffer = (struct scatterlist *)cmd->request_buffer;
+ cmd->SCp.buffers_residual = cmd->use_sg - 1;
+ cmd->SCp.ptr = (char *)page_address(cmd->SCp.buffer->page) +
+ cmd->SCp.buffer->offset;
+ cmd->SCp.this_residual = cmd->SCp.buffer->length;
+ /* ++roman: Try to merge some scatter-buffers if they are at
+ * contiguous physical addresses.
+ */
+ merge_contiguous_buffers(cmd);
+ } else {
+ cmd->SCp.buffer = NULL;
+ cmd->SCp.buffers_residual = 0;
+ cmd->SCp.ptr = (char *)cmd->request_buffer;
+ cmd->SCp.this_residual = cmd->request_bufflen;
+ }
}
#include <linux/delay.h>
#if NDEBUG
static struct {
- unsigned char mask;
- const char * name;}
-signals[] = {{ SR_DBP, "PARITY"}, { SR_RST, "RST" }, { SR_BSY, "BSY" },
- { SR_REQ, "REQ" }, { SR_MSG, "MSG" }, { SR_CD, "CD" }, { SR_IO, "IO" },
- { SR_SEL, "SEL" }, {0, NULL}},
-basrs[] = {{BASR_ATN, "ATN"}, {BASR_ACK, "ACK"}, {0, NULL}},
-icrs[] = {{ICR_ASSERT_RST, "ASSERT RST"},{ICR_ASSERT_ACK, "ASSERT ACK"},
- {ICR_ASSERT_BSY, "ASSERT BSY"}, {ICR_ASSERT_SEL, "ASSERT SEL"},
- {ICR_ASSERT_ATN, "ASSERT ATN"}, {ICR_ASSERT_DATA, "ASSERT DATA"},
- {0, NULL}},
-mrs[] = {{MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, {MR_TARGET, "MODE TARGET"},
- {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, {MR_ENABLE_PAR_INTR,
- "MODE PARITY INTR"}, {MR_ENABLE_EOP_INTR,"MODE EOP INTR"},
- {MR_MONITOR_BSY, "MODE MONITOR BSY"},
- {MR_DMA_MODE, "MODE DMA"}, {MR_ARBITRATE, "MODE ARBITRATION"},
- {0, NULL}};
+ unsigned char mask;
+ const char *name;
+} signals[] = {
+ { SR_DBP, "PARITY"}, { SR_RST, "RST" }, { SR_BSY, "BSY" },
+ { SR_REQ, "REQ" }, { SR_MSG, "MSG" }, { SR_CD, "CD" }, { SR_IO, "IO" },
+ { SR_SEL, "SEL" }, {0, NULL}
+}, basrs[] = {
+ {BASR_ATN, "ATN"}, {BASR_ACK, "ACK"}, {0, NULL}
+}, icrs[] = {
+ {ICR_ASSERT_RST, "ASSERT RST"},{ICR_ASSERT_ACK, "ASSERT ACK"},
+ {ICR_ASSERT_BSY, "ASSERT BSY"}, {ICR_ASSERT_SEL, "ASSERT SEL"},
+ {ICR_ASSERT_ATN, "ASSERT ATN"}, {ICR_ASSERT_DATA, "ASSERT DATA"},
+ {0, NULL}
+}, mrs[] = {
+ {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, {MR_TARGET, "MODE TARGET"},
+ {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, {MR_ENABLE_PAR_INTR,
+ "MODE PARITY INTR"}, {MR_ENABLE_EOP_INTR,"MODE EOP INTR"},
+ {MR_MONITOR_BSY, "MODE MONITOR BSY"},
+ {MR_DMA_MODE, "MODE DMA"}, {MR_ARBITRATE, "MODE ARBITRATION"},
+ {0, NULL}
+};
/*
* Function : void NCR5380_print(struct Scsi_Host *instance)
@@ -553,45 +563,47 @@ mrs[] = {{MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, {MR_TARGET, "MODE TARGET"},
* Input : instance - which NCR5380
*/
-static void NCR5380_print(struct Scsi_Host *instance) {
- unsigned char status, data, basr, mr, icr, i;
- unsigned long flags;
-
- local_irq_save(flags);
- data = NCR5380_read(CURRENT_SCSI_DATA_REG);
- status = NCR5380_read(STATUS_REG);
- mr = NCR5380_read(MODE_REG);
- icr = NCR5380_read(INITIATOR_COMMAND_REG);
- basr = NCR5380_read(BUS_AND_STATUS_REG);
- local_irq_restore(flags);
- printk("STATUS_REG: %02x ", status);
- for (i = 0; signals[i].mask ; ++i)
- if (status & signals[i].mask)
- printk(",%s", signals[i].name);
- printk("\nBASR: %02x ", basr);
- for (i = 0; basrs[i].mask ; ++i)
- if (basr & basrs[i].mask)
- printk(",%s", basrs[i].name);
- printk("\nICR: %02x ", icr);
- for (i = 0; icrs[i].mask; ++i)
- if (icr & icrs[i].mask)
- printk(",%s", icrs[i].name);
- printk("\nMODE: %02x ", mr);
- for (i = 0; mrs[i].mask; ++i)
- if (mr & mrs[i].mask)
- printk(",%s", mrs[i].name);
- printk("\n");
+static void NCR5380_print(struct Scsi_Host *instance)
+{
+ unsigned char status, data, basr, mr, icr, i;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ data = NCR5380_read(CURRENT_SCSI_DATA_REG);
+ status = NCR5380_read(STATUS_REG);
+ mr = NCR5380_read(MODE_REG);
+ icr = NCR5380_read(INITIATOR_COMMAND_REG);
+ basr = NCR5380_read(BUS_AND_STATUS_REG);
+ local_irq_restore(flags);
+ printk("STATUS_REG: %02x ", status);
+ for (i = 0; signals[i].mask; ++i)
+ if (status & signals[i].mask)
+ printk(",%s", signals[i].name);
+ printk("\nBASR: %02x ", basr);
+ for (i = 0; basrs[i].mask; ++i)
+ if (basr & basrs[i].mask)
+ printk(",%s", basrs[i].name);
+ printk("\nICR: %02x ", icr);
+ for (i = 0; icrs[i].mask; ++i)
+ if (icr & icrs[i].mask)
+ printk(",%s", icrs[i].name);
+ printk("\nMODE: %02x ", mr);
+ for (i = 0; mrs[i].mask; ++i)
+ if (mr & mrs[i].mask)
+ printk(",%s", mrs[i].name);
+ printk("\n");
}
static struct {
- unsigned char value;
- const char *name;
+ unsigned char value;
+ const char *name;
} phases[] = {
- {PHASE_DATAOUT, "DATAOUT"}, {PHASE_DATAIN, "DATAIN"}, {PHASE_CMDOUT, "CMDOUT"},
- {PHASE_STATIN, "STATIN"}, {PHASE_MSGOUT, "MSGOUT"}, {PHASE_MSGIN, "MSGIN"},
- {PHASE_UNKNOWN, "UNKNOWN"}};
+ {PHASE_DATAOUT, "DATAOUT"}, {PHASE_DATAIN, "DATAIN"}, {PHASE_CMDOUT, "CMDOUT"},
+ {PHASE_STATIN, "STATIN"}, {PHASE_MSGOUT, "MSGOUT"}, {PHASE_MSGIN, "MSGIN"},
+ {PHASE_UNKNOWN, "UNKNOWN"}
+};
-/*
+/*
* Function : void NCR5380_print_phase(struct Scsi_Host *instance)
*
* Purpose : print the current SCSI phase for debugging purposes
@@ -601,30 +613,35 @@ static struct {
static void NCR5380_print_phase(struct Scsi_Host *instance)
{
- unsigned char status;
- int i;
-
- status = NCR5380_read(STATUS_REG);
- if (!(status & SR_REQ))
- printk(KERN_DEBUG "scsi%d: REQ not asserted, phase unknown.\n", HOSTNO);
- else {
- for (i = 0; (phases[i].value != PHASE_UNKNOWN) &&
- (phases[i].value != (status & PHASE_MASK)); ++i);
- printk(KERN_DEBUG "scsi%d: phase %s\n", HOSTNO, phases[i].name);
- }
+ unsigned char status;
+ int i;
+
+ status = NCR5380_read(STATUS_REG);
+ if (!(status & SR_REQ))
+ printk(KERN_DEBUG "scsi%d: REQ not asserted, phase unknown.\n", HOSTNO);
+ else {
+ for (i = 0; (phases[i].value != PHASE_UNKNOWN) &&
+ (phases[i].value != (status & PHASE_MASK)); ++i)
+ ;
+ printk(KERN_DEBUG "scsi%d: phase %s\n", HOSTNO, phases[i].name);
+ }
}
#else /* !NDEBUG */
/* dummies... */
-__inline__ void NCR5380_print(struct Scsi_Host *instance) { };
-__inline__ void NCR5380_print_phase(struct Scsi_Host *instance) { };
+static inline void NCR5380_print(struct Scsi_Host *instance)
+{
+};
+static inline void NCR5380_print_phase(struct Scsi_Host *instance)
+{
+};
#endif
/*
* ++roman: New scheme of calling NCR5380_main()
- *
+ *
* If we're not in an interrupt, we can call our main directly, it cannot be
* already running. Else, we queue it on a task queue, if not 'main_running'
* tells us that a lower level is already executing it. This way,
@@ -638,33 +655,33 @@ __inline__ void NCR5380_print_phase(struct Scsi_Host *instance) { };
#include <linux/workqueue.h>
#include <linux/interrupt.h>
-static volatile int main_running = 0;
-static DECLARE_WORK(NCR5380_tqueue, (void (*)(void*))NCR5380_main, NULL);
+static volatile int main_running;
+static DECLARE_WORK(NCR5380_tqueue, (void (*)(void *))NCR5380_main, NULL);
-static __inline__ void queue_main(void)
+static inline void queue_main(void)
{
- if (!main_running) {
- /* If in interrupt and NCR5380_main() not already running,
- queue it on the 'immediate' task queue, to be processed
- immediately after the current interrupt processing has
- finished. */
- schedule_work(&NCR5380_tqueue);
- }
- /* else: nothing to do: the running NCR5380_main() will pick up
- any newly queued command. */
+ if (!main_running) {
+ /* If in interrupt and NCR5380_main() not already running,
+ queue it on the 'immediate' task queue, to be processed
+ immediately after the current interrupt processing has
+ finished. */
+ schedule_work(&NCR5380_tqueue);
+ }
+ /* else: nothing to do: the running NCR5380_main() will pick up
+ any newly queued command. */
}
-static inline void NCR5380_all_init (void)
+static inline void NCR5380_all_init(void)
{
- static int done = 0;
- if (!done) {
- INI_PRINTK("scsi : NCR5380_all_init()\n");
- done = 1;
- }
+ static int done = 0;
+ if (!done) {
+ INI_PRINTK("scsi : NCR5380_all_init()\n");
+ done = 1;
+ }
}
-
+
/*
* Function : void NCR58380_print_options (struct Scsi_Host *instance)
*
@@ -674,23 +691,23 @@ static inline void NCR5380_all_init (void)
* Inputs : instance, pointer to this instance. Unused.
*/
-static void __init NCR5380_print_options (struct Scsi_Host *instance)
+static void __init NCR5380_print_options(struct Scsi_Host *instance)
{
- printk(" generic options"
-#ifdef AUTOSENSE
- " AUTOSENSE"
+ printk(" generic options"
+#ifdef AUTOSENSE
+ " AUTOSENSE"
#endif
#ifdef REAL_DMA
- " REAL DMA"
+ " REAL DMA"
#endif
#ifdef PARITY
- " PARITY"
+ " PARITY"
#endif
#ifdef SUPPORT_TAGS
- " SCSI-2 TAGGED QUEUING"
+ " SCSI-2 TAGGED QUEUING"
#endif
- );
- printk(" generic release=%d", NCR5380_PUBLIC_RELEASE);
+ );
+ printk(" generic release=%d", NCR5380_PUBLIC_RELEASE);
}
/*
@@ -699,27 +716,27 @@ static void __init NCR5380_print_options (struct Scsi_Host *instance)
* Purpose : print commands in the various queues, called from
* NCR5380_abort and NCR5380_debug to aid debugging.
*
- * Inputs : instance, pointer to this instance.
+ * Inputs : instance, pointer to this instance.
*/
-static void NCR5380_print_status (struct Scsi_Host *instance)
+static void NCR5380_print_status(struct Scsi_Host *instance)
{
- char *pr_bfr;
- char *start;
- int len;
-
- NCR_PRINT(NDEBUG_ANY);
- NCR_PRINT_PHASE(NDEBUG_ANY);
-
- pr_bfr = (char *) __get_free_page(GFP_ATOMIC);
- if (!pr_bfr) {
- printk("NCR5380_print_status: no memory for print buffer\n");
- return;
- }
- len = NCR5380_proc_info(instance, pr_bfr, &start, 0, PAGE_SIZE, 0);
- pr_bfr[len] = 0;
- printk("\n%s\n", pr_bfr);
- free_page((unsigned long) pr_bfr);
+ char *pr_bfr;
+ char *start;
+ int len;
+
+ NCR_PRINT(NDEBUG_ANY);
+ NCR_PRINT_PHASE(NDEBUG_ANY);
+
+ pr_bfr = (char *)__get_free_page(GFP_ATOMIC);
+ if (!pr_bfr) {
+ printk("NCR5380_print_status: no memory for print buffer\n");
+ return;
+ }
+ len = NCR5380_proc_info(instance, pr_bfr, &start, 0, PAGE_SIZE, 0);
+ pr_bfr[len] = 0;
+ printk("\n%s\n", pr_bfr);
+ free_page((unsigned long)pr_bfr);
}
@@ -738,146 +755,144 @@ static void NCR5380_print_status (struct Scsi_Host *instance)
*/
#undef SPRINTF
-#define SPRINTF(fmt,args...) \
- do { if (pos + strlen(fmt) + 20 /* slop */ < buffer + length) \
- pos += sprintf(pos, fmt , ## args); } while(0)
-static
-char *lprint_Scsi_Cmnd (Scsi_Cmnd *cmd, char *pos, char *buffer, int length);
-
-static
-int NCR5380_proc_info (struct Scsi_Host *instance, char *buffer, char **start, off_t offset,
- int length, int inout)
+#define SPRINTF(fmt,args...) \
+ do { \
+ if (pos + strlen(fmt) + 20 /* slop */ < buffer + length) \
+ pos += sprintf(pos, fmt , ## args); \
+ } while(0)
+static char *lprint_Scsi_Cmnd(Scsi_Cmnd *cmd, char *pos, char *buffer, int length);
+
+static int NCR5380_proc_info(struct Scsi_Host *instance, char *buffer,
+ char **start, off_t offset, int length, int inout)
{
- char *pos = buffer;
- struct NCR5380_hostdata *hostdata;
- Scsi_Cmnd *ptr;
- unsigned long flags;
- off_t begin = 0;
-#define check_offset() \
- do { \
- if (pos - buffer < offset - begin) { \
- begin += pos - buffer; \
- pos = buffer; \
- } \
- } while (0)
-
- hostdata = (struct NCR5380_hostdata *)instance->hostdata;
-
- if (inout) { /* Has data been written to the file ? */
- return(-ENOSYS); /* Currently this is a no-op */
- }
- SPRINTF("NCR5380 core release=%d.\n", NCR5380_PUBLIC_RELEASE);
- check_offset();
- local_irq_save(flags);
- SPRINTF("NCR5380: coroutine is%s running.\n", main_running ? "" : "n't");
- check_offset();
- if (!hostdata->connected)
- SPRINTF("scsi%d: no currently connected command\n", HOSTNO);
- else
- pos = lprint_Scsi_Cmnd ((Scsi_Cmnd *) hostdata->connected,
- pos, buffer, length);
- SPRINTF("scsi%d: issue_queue\n", HOSTNO);
- check_offset();
- for (ptr = (Scsi_Cmnd *) hostdata->issue_queue; ptr; ptr = NEXT(ptr)) {
- pos = lprint_Scsi_Cmnd (ptr, pos, buffer, length);
+ char *pos = buffer;
+ struct NCR5380_hostdata *hostdata;
+ Scsi_Cmnd *ptr;
+ unsigned long flags;
+ off_t begin = 0;
+#define check_offset() \
+ do { \
+ if (pos - buffer < offset - begin) { \
+ begin += pos - buffer; \
+ pos = buffer; \
+ } \
+ } while (0)
+
+ hostdata = (struct NCR5380_hostdata *)instance->hostdata;
+
+ if (inout) /* Has data been written to the file ? */
+ return -ENOSYS; /* Currently this is a no-op */
+ SPRINTF("NCR5380 core release=%d.\n", NCR5380_PUBLIC_RELEASE);
+ check_offset();
+ local_irq_save(flags);
+ SPRINTF("NCR5380: coroutine is%s running.\n",
+ main_running ? "" : "n't");
check_offset();
- }
+ if (!hostdata->connected)
+ SPRINTF("scsi%d: no currently connected command\n", HOSTNO);
+ else
+ pos = lprint_Scsi_Cmnd((Scsi_Cmnd *) hostdata->connected,
+ pos, buffer, length);
+ SPRINTF("scsi%d: issue_queue\n", HOSTNO);
+ check_offset();
+ for (ptr = (Scsi_Cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr)) {
+ pos = lprint_Scsi_Cmnd(ptr, pos, buffer, length);
+ check_offset();
+ }
- SPRINTF("scsi%d: disconnected_queue\n", HOSTNO);
- check_offset();
- for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr;
- ptr = NEXT(ptr)) {
- pos = lprint_Scsi_Cmnd (ptr, pos, buffer, length);
+ SPRINTF("scsi%d: disconnected_queue\n", HOSTNO);
check_offset();
- }
+ for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr;
+ ptr = NEXT(ptr)) {
+ pos = lprint_Scsi_Cmnd(ptr, pos, buffer, length);
+ check_offset();
+ }
- local_irq_restore(flags);
- *start = buffer + (offset - begin);
- if (pos - buffer < offset - begin)
- return 0;
- else if (pos - buffer - (offset - begin) < length)
- return pos - buffer - (offset - begin);
- return length;
+ local_irq_restore(flags);
+ *start = buffer + (offset - begin);
+ if (pos - buffer < offset - begin)
+ return 0;
+ else if (pos - buffer - (offset - begin) < length)
+ return pos - buffer - (offset - begin);
+ return length;
}
-static char *
-lprint_Scsi_Cmnd (Scsi_Cmnd *cmd, char *pos, char *buffer, int length)
+static char *lprint_Scsi_Cmnd(Scsi_Cmnd *cmd, char *pos, char *buffer, int length)
{
- int i, s;
- unsigned char *command;
- SPRINTF("scsi%d: destination target %d, lun %d\n",
- H_NO(cmd), cmd->device->id, cmd->device->lun);
- SPRINTF(" command = ");
- command = cmd->cmnd;
- SPRINTF("%2d (0x%02x)", command[0], command[0]);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- SPRINTF(" %02x", command[i]);
- SPRINTF("\n");
- return pos;
+ int i, s;
+ unsigned char *command;
+ SPRINTF("scsi%d: destination target %d, lun %d\n",
+ H_NO(cmd), cmd->device->id, cmd->device->lun);
+ SPRINTF(" command = ");
+ command = cmd->cmnd;
+ SPRINTF("%2d (0x%02x)", command[0], command[0]);
+ for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
+ SPRINTF(" %02x", command[i]);
+ SPRINTF("\n");
+ return pos;
}
-/*
+/*
* Function : void NCR5380_init (struct Scsi_Host *instance)
*
* Purpose : initializes *instance and corresponding 5380 chip.
*
- * Inputs : instance - instantiation of the 5380 driver.
+ * Inputs : instance - instantiation of the 5380 driver.
*
* Notes : I assume that the host, hostno, and id bits have been
- * set correctly. I don't care about the irq and other fields.
- *
+ * set correctly. I don't care about the irq and other fields.
+ *
*/
-static int NCR5380_init (struct Scsi_Host *instance, int flags)
+static int NCR5380_init(struct Scsi_Host *instance, int flags)
{
- int i;
- SETUP_HOSTDATA(instance);
-
- NCR5380_all_init();
-
- hostdata->aborted = 0;
- hostdata->id_mask = 1 << instance->this_id;
- hostdata->id_higher_mask = 0;
- for (i = hostdata->id_mask; i <= 0x80; i <<= 1)
- if (i > hostdata->id_mask)
- hostdata->id_higher_mask |= i;
- for (i = 0; i < 8; ++i)
- hostdata->busy[i] = 0;
+ int i;
+ SETUP_HOSTDATA(instance);
+
+ NCR5380_all_init();
+
+ hostdata->aborted = 0;
+ hostdata->id_mask = 1 << instance->this_id;
+ hostdata->id_higher_mask = 0;
+ for (i = hostdata->id_mask; i <= 0x80; i <<= 1)
+ if (i > hostdata->id_mask)
+ hostdata->id_higher_mask |= i;
+ for (i = 0; i < 8; ++i)
+ hostdata->busy[i] = 0;
#ifdef SUPPORT_TAGS
- init_tags();
+ init_tags();
#endif
#if defined (REAL_DMA)
- hostdata->dma_len = 0;
+ hostdata->dma_len = 0;
#endif
- hostdata->targets_present = 0;
- hostdata->connected = NULL;
- hostdata->issue_queue = NULL;
- hostdata->disconnected_queue = NULL;
- hostdata->flags = FLAG_CHECK_LAST_BYTE_SENT;
-
- if (!the_template) {
- the_template = instance->hostt;
- first_instance = instance;
- }
-
+ hostdata->targets_present = 0;
+ hostdata->connected = NULL;
+ hostdata->issue_queue = NULL;
+ hostdata->disconnected_queue = NULL;
+ hostdata->flags = FLAG_CHECK_LAST_BYTE_SENT;
+
+ if (!the_template) {
+ the_template = instance->hostt;
+ first_instance = instance;
+ }
#ifndef AUTOSENSE
- if ((instance->cmd_per_lun > 1) || (instance->can_queue > 1))
- printk("scsi%d: WARNING : support for multiple outstanding commands enabled\n"
- " without AUTOSENSE option, contingent allegiance conditions may\n"
- " be incorrectly cleared.\n", HOSTNO);
+ if ((instance->cmd_per_lun > 1) || (instance->can_queue > 1))
+ printk("scsi%d: WARNING : support for multiple outstanding commands enabled\n"
+ " without AUTOSENSE option, contingent allegiance conditions may\n"
+ " be incorrectly cleared.\n", HOSTNO);
#endif /* def AUTOSENSE */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(TARGET_COMMAND_REG, 0);
- NCR5380_write(SELECT_ENABLE_REG, 0);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_write(TARGET_COMMAND_REG, 0);
+ NCR5380_write(SELECT_ENABLE_REG, 0);
- return 0;
+ return 0;
}
-/*
+/*
* our own old-style timeout update
*/
/*
@@ -890,331 +905,328 @@ static int NCR5380_init (struct Scsi_Host *instance, int flags)
int atari_scsi_update_timeout(Scsi_Cmnd * SCset, int timeout)
{
- int rtn;
-
- /*
- * We are using the new error handling code to actually register/deregister
- * timers for timeout.
- */
-
- if (!timer_pending(&SCset->eh_timeout)) {
- rtn = 0;
- } else {
- rtn = SCset->eh_timeout.expires - jiffies;
- }
-
- if (timeout == 0) {
- del_timer(&SCset->eh_timeout);
- SCset->eh_timeout.data = (unsigned long) NULL;
- SCset->eh_timeout.expires = 0;
- } else {
- if (SCset->eh_timeout.data != (unsigned long) NULL)
- del_timer(&SCset->eh_timeout);
- SCset->eh_timeout.data = (unsigned long) SCset;
- SCset->eh_timeout.expires = jiffies + timeout;
- add_timer(&SCset->eh_timeout);
- }
+ int rtn;
+
+ /*
+ * We are using the new error handling code to actually register/deregister
+ * timers for timeout.
+ */
+
+ if (!timer_pending(&SCset->eh_timeout))
+ rtn = 0;
+ else
+ rtn = SCset->eh_timeout.expires - jiffies;
+
+ if (timeout == 0) {
+ del_timer(&SCset->eh_timeout);
+ SCset->eh_timeout.data = (unsigned long)NULL;
+ SCset->eh_timeout.expires = 0;
+ } else {
+ if (SCset->eh_timeout.data != (unsigned long)NULL)
+ del_timer(&SCset->eh_timeout);
+ SCset->eh_timeout.data = (unsigned long)SCset;
+ SCset->eh_timeout.expires = jiffies + timeout;
+ add_timer(&SCset->eh_timeout);
+ }
return rtn;
}
-/*
- * Function : int NCR5380_queue_command (Scsi_Cmnd *cmd,
- * void (*done)(Scsi_Cmnd *))
+/*
+ * Function : int NCR5380_queue_command (Scsi_Cmnd *cmd,
+ * void (*done)(Scsi_Cmnd *))
*
* Purpose : enqueues a SCSI command
*
* Inputs : cmd - SCSI command, done - function called on completion, with
* a pointer to the command descriptor.
- *
+ *
* Returns : 0
*
- * Side effects :
- * cmd is added to the per instance issue_queue, with minor
- * twiddling done to the host specific fields of cmd. If the
+ * Side effects :
+ * cmd is added to the per instance issue_queue, with minor
+ * twiddling done to the host specific fields of cmd. If the
* main coroutine is not running, it is restarted.
*
*/
-static
-int NCR5380_queue_command (Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
+static int NCR5380_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
{
- SETUP_HOSTDATA(cmd->device->host);
- Scsi_Cmnd *tmp;
- int oldto;
- unsigned long flags;
- // extern int update_timeout(Scsi_Cmnd * SCset, int timeout);
+ SETUP_HOSTDATA(cmd->device->host);
+ Scsi_Cmnd *tmp;
+ int oldto;
+ unsigned long flags;
+ // extern int update_timeout(Scsi_Cmnd * SCset, int timeout);
#if (NDEBUG & NDEBUG_NO_WRITE)
- switch (cmd->cmnd[0]) {
- case WRITE_6:
- case WRITE_10:
- printk(KERN_NOTICE "scsi%d: WRITE attempted with NO_WRITE debugging flag set\n",
- H_NO(cmd));
- cmd->result = (DID_ERROR << 16);
- done(cmd);
- return 0;
- }
+ switch (cmd->cmnd[0]) {
+ case WRITE_6:
+ case WRITE_10:
+ printk(KERN_NOTICE "scsi%d: WRITE attempted with NO_WRITE debugging flag set\n",
+ H_NO(cmd));
+ cmd->result = (DID_ERROR << 16);
+ done(cmd);
+ return 0;
+ }
#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
-
#ifdef NCR5380_STATS
# if 0
- if (!hostdata->connected && !hostdata->issue_queue &&
- !hostdata->disconnected_queue) {
- hostdata->timebase = jiffies;
- }
+ if (!hostdata->connected && !hostdata->issue_queue &&
+ !hostdata->disconnected_queue) {
+ hostdata->timebase = jiffies;
+ }
# endif
# ifdef NCR5380_STAT_LIMIT
- if (cmd->request_bufflen > NCR5380_STAT_LIMIT)
+ if (cmd->request_bufflen > NCR5380_STAT_LIMIT)
# endif
- switch (cmd->cmnd[0])
- {
- case WRITE:
- case WRITE_6:
- case WRITE_10:
- hostdata->time_write[cmd->device->id] -= (jiffies - hostdata->timebase);
- hostdata->bytes_write[cmd->device->id] += cmd->request_bufflen;
- hostdata->pendingw++;
- break;
- case READ:
- case READ_6:
- case READ_10:
- hostdata->time_read[cmd->device->id] -= (jiffies - hostdata->timebase);
- hostdata->bytes_read[cmd->device->id] += cmd->request_bufflen;
- hostdata->pendingr++;
- break;
- }
+ switch (cmd->cmnd[0]) {
+ case WRITE:
+ case WRITE_6:
+ case WRITE_10:
+ hostdata->time_write[cmd->device->id] -= (jiffies - hostdata->timebase);
+ hostdata->bytes_write[cmd->device->id] += cmd->request_bufflen;
+ hostdata->pendingw++;
+ break;
+ case READ:
+ case READ_6:
+ case READ_10:
+ hostdata->time_read[cmd->device->id] -= (jiffies - hostdata->timebase);
+ hostdata->bytes_read[cmd->device->id] += cmd->request_bufflen;
+ hostdata->pendingr++;
+ break;
+ }
#endif
- /*
- * We use the host_scribble field as a pointer to the next command
- * in a queue
- */
-
- NEXT(cmd) = NULL;
- cmd->scsi_done = done;
-
- cmd->result = 0;
-
-
- /*
- * Insert the cmd into the issue queue. Note that REQUEST SENSE
- * commands are added to the head of the queue since any command will
- * clear the contingent allegiance condition that exists and the
- * sense data is only guaranteed to be valid while the condition exists.
- */
-
- local_irq_save(flags);
- /* ++guenther: now that the issue queue is being set up, we can lock ST-DMA.
- * Otherwise a running NCR5380_main may steal the lock.
- * Lock before actually inserting due to fairness reasons explained in
- * atari_scsi.c. If we insert first, then it's impossible for this driver
- * to release the lock.
- * Stop timer for this command while waiting for the lock, or timeouts
- * may happen (and they really do), and it's no good if the command doesn't
- * appear in any of the queues.
- * ++roman: Just disabling the NCR interrupt isn't sufficient here,
- * because also a timer int can trigger an abort or reset, which would
- * alter queues and touch the lock.
- */
- if (!IS_A_TT()) {
- oldto = atari_scsi_update_timeout(cmd, 0);
- falcon_get_lock();
- atari_scsi_update_timeout(cmd, oldto);
- }
- if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
- LIST(cmd, hostdata->issue_queue);
- NEXT(cmd) = hostdata->issue_queue;
- hostdata->issue_queue = cmd;
- } else {
- for (tmp = (Scsi_Cmnd *)hostdata->issue_queue;
- NEXT(tmp); tmp = NEXT(tmp))
- ;
- LIST(cmd, tmp);
- NEXT(tmp) = cmd;
- }
- local_irq_restore(flags);
-
- QU_PRINTK("scsi%d: command added to %s of queue\n", H_NO(cmd),
- (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
-
- /* If queue_command() is called from an interrupt (real one or bottom
- * half), we let queue_main() do the job of taking care about main. If it
- * is already running, this is a no-op, else main will be queued.
- *
- * If we're not in an interrupt, we can call NCR5380_main()
- * unconditionally, because it cannot be already running.
- */
- if (in_interrupt() || ((flags >> 8) & 7) >= 6)
- queue_main();
- else
- NCR5380_main(NULL);
- return 0;
+ /*
+ * We use the host_scribble field as a pointer to the next command
+ * in a queue
+ */
+
+ NEXT(cmd) = NULL;
+ cmd->scsi_done = done;
+
+ cmd->result = 0;
+
+ /*
+ * Insert the cmd into the issue queue. Note that REQUEST SENSE
+ * commands are added to the head of the queue since any command will
+ * clear the contingent allegiance condition that exists and the
+ * sense data is only guaranteed to be valid while the condition exists.
+ */
+
+ local_irq_save(flags);
+ /* ++guenther: now that the issue queue is being set up, we can lock ST-DMA.
+ * Otherwise a running NCR5380_main may steal the lock.
+ * Lock before actually inserting due to fairness reasons explained in
+ * atari_scsi.c. If we insert first, then it's impossible for this driver
+ * to release the lock.
+ * Stop timer for this command while waiting for the lock, or timeouts
+ * may happen (and they really do), and it's no good if the command doesn't
+ * appear in any of the queues.
+ * ++roman: Just disabling the NCR interrupt isn't sufficient here,
+ * because also a timer int can trigger an abort or reset, which would
+ * alter queues and touch the lock.
+ */
+ if (!IS_A_TT()) {
+ oldto = atari_scsi_update_timeout(cmd, 0);
+ falcon_get_lock();
+ atari_scsi_update_timeout(cmd, oldto);
+ }
+ if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
+ LIST(cmd, hostdata->issue_queue);
+ NEXT(cmd) = hostdata->issue_queue;
+ hostdata->issue_queue = cmd;
+ } else {
+ for (tmp = (Scsi_Cmnd *)hostdata->issue_queue;
+ NEXT(tmp); tmp = NEXT(tmp))
+ ;
+ LIST(cmd, tmp);
+ NEXT(tmp) = cmd;
+ }
+ local_irq_restore(flags);
+
+ QU_PRINTK("scsi%d: command added to %s of queue\n", H_NO(cmd),
+ (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
+
+ /* If queue_command() is called from an interrupt (real one or bottom
+ * half), we let queue_main() do the job of taking care about main. If it
+ * is already running, this is a no-op, else main will be queued.
+ *
+ * If we're not in an interrupt, we can call NCR5380_main()
+ * unconditionally, because it cannot be already running.
+ */
+ if (in_interrupt() || ((flags >> 8) & 7) >= 6)
+ queue_main();
+ else
+ NCR5380_main(NULL);
+ return 0;
}
/*
- * Function : NCR5380_main (void)
+ * Function : NCR5380_main (void)
*
- * Purpose : NCR5380_main is a coroutine that runs as long as more work can
- * be done on the NCR5380 host adapters in a system. Both
- * NCR5380_queue_command() and NCR5380_intr() will try to start it
+ * Purpose : NCR5380_main is a coroutine that runs as long as more work can
+ * be done on the NCR5380 host adapters in a system. Both
+ * NCR5380_queue_command() and NCR5380_intr() will try to start it
* in case it is not running.
- *
- * NOTE : NCR5380_main exits with interrupts *disabled*, the caller should
+ *
+ * NOTE : NCR5380_main exits with interrupts *disabled*, the caller should
* reenable them. This prevents reentrancy and kernel stack overflow.
- */
-
-static void NCR5380_main (void *bl)
+ */
+
+static void NCR5380_main(void *bl)
{
- Scsi_Cmnd *tmp, *prev;
- struct Scsi_Host *instance = first_instance;
- struct NCR5380_hostdata *hostdata = HOSTDATA(instance);
- int done;
- unsigned long flags;
-
- /*
- * We run (with interrupts disabled) until we're sure that none of
- * the host adapters have anything that can be done, at which point
- * we set main_running to 0 and exit.
- *
- * Interrupts are enabled before doing various other internal
- * instructions, after we've decided that we need to run through
- * the loop again.
- *
- * this should prevent any race conditions.
- *
- * ++roman: Just disabling the NCR interrupt isn't sufficient here,
- * because also a timer int can trigger an abort or reset, which can
- * alter queues and touch the Falcon lock.
- */
-
- /* Tell int handlers main() is now already executing. Note that
- no races are possible here. If an int comes in before
- 'main_running' is set here, and queues/executes main via the
- task queue, it doesn't do any harm, just this instance of main
- won't find any work left to do. */
- if (main_running)
- return;
- main_running = 1;
-
- local_save_flags(flags);
- do {
- local_irq_disable(); /* Freeze request queues */
- done = 1;
-
- if (!hostdata->connected) {
- MAIN_PRINTK( "scsi%d: not connected\n", HOSTNO );
- /*
- * Search through the issue_queue for a command destined
- * for a target that's not busy.
- */
+ Scsi_Cmnd *tmp, *prev;
+ struct Scsi_Host *instance = first_instance;
+ struct NCR5380_hostdata *hostdata = HOSTDATA(instance);
+ int done;
+ unsigned long flags;
+
+ /*
+ * We run (with interrupts disabled) until we're sure that none of
+ * the host adapters have anything that can be done, at which point
+ * we set main_running to 0 and exit.
+ *
+ * Interrupts are enabled before doing various other internal
+ * instructions, after we've decided that we need to run through
+ * the loop again.
+ *
+ * this should prevent any race conditions.
+ *
+ * ++roman: Just disabling the NCR interrupt isn't sufficient here,
+ * because also a timer int can trigger an abort or reset, which can
+ * alter queues and touch the Falcon lock.
+ */
+
+ /* Tell int handlers main() is now already executing. Note that
+ no races are possible here. If an int comes in before
+ 'main_running' is set here, and queues/executes main via the
+ task queue, it doesn't do any harm, just this instance of main
+ won't find any work left to do. */
+ if (main_running)
+ return;
+ main_running = 1;
+
+ local_save_flags(flags);
+ do {
+ local_irq_disable(); /* Freeze request queues */
+ done = 1;
+
+ if (!hostdata->connected) {
+ MAIN_PRINTK("scsi%d: not connected\n", HOSTNO);
+ /*
+ * Search through the issue_queue for a command destined
+ * for a target that's not busy.
+ */
#if (NDEBUG & NDEBUG_LISTS)
- for (tmp = (Scsi_Cmnd *) hostdata->issue_queue, prev = NULL;
- tmp && (tmp != prev); prev = tmp, tmp = NEXT(tmp))
- ;
- /*printk("%p ", tmp);*/
- if ((tmp == prev) && tmp) printk(" LOOP\n");/* else printk("\n");*/
+ for (tmp = (Scsi_Cmnd *) hostdata->issue_queue, prev = NULL;
+ tmp && (tmp != prev); prev = tmp, tmp = NEXT(tmp))
+ ;
+ /*printk("%p ", tmp);*/
+ if ((tmp == prev) && tmp)
+ printk(" LOOP\n");
+ /* else printk("\n"); */
#endif
- for (tmp = (Scsi_Cmnd *) hostdata->issue_queue,
- prev = NULL; tmp; prev = tmp, tmp = NEXT(tmp) ) {
+ for (tmp = (Scsi_Cmnd *) hostdata->issue_queue,
+ prev = NULL; tmp; prev = tmp, tmp = NEXT(tmp)) {
#if (NDEBUG & NDEBUG_LISTS)
- if (prev != tmp)
- printk("MAIN tmp=%p target=%d busy=%d lun=%d\n",
- tmp, tmp->device->id, hostdata->busy[tmp->device->id],
- tmp->device->lun);
+ if (prev != tmp)
+ printk("MAIN tmp=%p target=%d busy=%d lun=%d\n",
+ tmp, tmp->device->id, hostdata->busy[tmp->device->id],
+ tmp->device->lun);
#endif
- /* When we find one, remove it from the issue queue. */
- /* ++guenther: possible race with Falcon locking */
- if (
+ /* When we find one, remove it from the issue queue. */
+ /* ++guenther: possible race with Falcon locking */
+ if (
#ifdef SUPPORT_TAGS
- !is_lun_busy( tmp, tmp->cmnd[0] != REQUEST_SENSE)
+ !is_lun_busy( tmp, tmp->cmnd[0] != REQUEST_SENSE)
#else
- !(hostdata->busy[tmp->device->id] & (1 << tmp->device->lun))
+ !(hostdata->busy[tmp->device->id] & (1 << tmp->device->lun))
#endif
- ) {
- /* ++guenther: just to be sure, this must be atomic */
- local_irq_disable();
- if (prev) {
- REMOVE(prev, NEXT(prev), tmp, NEXT(tmp));
- NEXT(prev) = NEXT(tmp);
- } else {
- REMOVE(-1, hostdata->issue_queue, tmp, NEXT(tmp));
- hostdata->issue_queue = NEXT(tmp);
- }
- NEXT(tmp) = NULL;
- falcon_dont_release++;
-
- /* reenable interrupts after finding one */
- local_irq_restore(flags);
-
- /*
- * Attempt to establish an I_T_L nexus here.
- * On success, instance->hostdata->connected is set.
- * On failure, we must add the command back to the
- * issue queue so we can keep trying.
- */
- MAIN_PRINTK("scsi%d: main(): command for target %d "
- "lun %d removed from issue_queue\n",
- HOSTNO, tmp->device->id, tmp->device->lun);
- /*
- * REQUEST SENSE commands are issued without tagged
- * queueing, even on SCSI-II devices because the
- * contingent allegiance condition exists for the
- * entire unit.
- */
- /* ++roman: ...and the standard also requires that
- * REQUEST SENSE command are untagged.
- */
-
+ ) {
+ /* ++guenther: just to be sure, this must be atomic */
+ local_irq_disable();
+ if (prev) {
+ REMOVE(prev, NEXT(prev), tmp, NEXT(tmp));
+ NEXT(prev) = NEXT(tmp);
+ } else {
+ REMOVE(-1, hostdata->issue_queue, tmp, NEXT(tmp));
+ hostdata->issue_queue = NEXT(tmp);
+ }
+ NEXT(tmp) = NULL;
+ falcon_dont_release++;
+
+ /* reenable interrupts after finding one */
+ local_irq_restore(flags);
+
+ /*
+ * Attempt to establish an I_T_L nexus here.
+ * On success, instance->hostdata->connected is set.
+ * On failure, we must add the command back to the
+ * issue queue so we can keep trying.
+ */
+ MAIN_PRINTK("scsi%d: main(): command for target %d "
+ "lun %d removed from issue_queue\n",
+ HOSTNO, tmp->device->id, tmp->device->lun);
+ /*
+ * REQUEST SENSE commands are issued without tagged
+ * queueing, even on SCSI-II devices because the
+ * contingent allegiance condition exists for the
+ * entire unit.
+ */
+ /* ++roman: ...and the standard also requires that
+ * REQUEST SENSE command are untagged.
+ */
+
#ifdef SUPPORT_TAGS
- cmd_get_tag( tmp, tmp->cmnd[0] != REQUEST_SENSE );
+ cmd_get_tag(tmp, tmp->cmnd[0] != REQUEST_SENSE);
#endif
- if (!NCR5380_select(instance, tmp,
- (tmp->cmnd[0] == REQUEST_SENSE) ? TAG_NONE :
- TAG_NEXT)) {
- falcon_dont_release--;
- /* release if target did not response! */
- falcon_release_lock_if_possible( hostdata );
- break;
- } else {
- local_irq_disable();
- LIST(tmp, hostdata->issue_queue);
- NEXT(tmp) = hostdata->issue_queue;
- hostdata->issue_queue = tmp;
+ if (!NCR5380_select(instance, tmp,
+ (tmp->cmnd[0] == REQUEST_SENSE) ? TAG_NONE :
+ TAG_NEXT)) {
+ falcon_dont_release--;
+ /* release if target did not response! */
+ falcon_release_lock_if_possible(hostdata);
+ break;
+ } else {
+ local_irq_disable();
+ LIST(tmp, hostdata->issue_queue);
+ NEXT(tmp) = hostdata->issue_queue;
+ hostdata->issue_queue = tmp;
#ifdef SUPPORT_TAGS
- cmd_free_tag( tmp );
+ cmd_free_tag(tmp);
#endif
- falcon_dont_release--;
- local_irq_restore(flags);
- MAIN_PRINTK("scsi%d: main(): select() failed, "
- "returned to issue_queue\n", HOSTNO);
- if (hostdata->connected)
- break;
- }
- } /* if target/lun/target queue is not busy */
- } /* for issue_queue */
- } /* if (!hostdata->connected) */
-
- if (hostdata->connected
+ falcon_dont_release--;
+ local_irq_restore(flags);
+ MAIN_PRINTK("scsi%d: main(): select() failed, "
+ "returned to issue_queue\n", HOSTNO);
+ if (hostdata->connected)
+ break;
+ }
+ } /* if target/lun/target queue is not busy */
+ } /* for issue_queue */
+ } /* if (!hostdata->connected) */
+
+ if (hostdata->connected
#ifdef REAL_DMA
- && !hostdata->dma_len
+ && !hostdata->dma_len
#endif
- ) {
- local_irq_restore(flags);
- MAIN_PRINTK("scsi%d: main: performing information transfer\n",
- HOSTNO);
- NCR5380_information_transfer(instance);
- MAIN_PRINTK("scsi%d: main: done set false\n", HOSTNO);
- done = 0;
- }
- } while (!done);
+ ) {
+ local_irq_restore(flags);
+ MAIN_PRINTK("scsi%d: main: performing information transfer\n",
+ HOSTNO);
+ NCR5380_information_transfer(instance);
+ MAIN_PRINTK("scsi%d: main: done set false\n", HOSTNO);
+ done = 0;
+ }
+ } while (!done);
- /* Better allow ints _after_ 'main_running' has been cleared, else
- an interrupt could believe we'll pick up the work it left for
- us, but we won't see it anymore here... */
- main_running = 0;
- local_irq_restore(flags);
+ /* Better allow ints _after_ 'main_running' has been cleared, else
+ an interrupt could believe we'll pick up the work it left for
+ us, but we won't see it anymore here... */
+ main_running = 0;
+ local_irq_restore(flags);
}
@@ -1223,1441 +1235,1439 @@ static void NCR5380_main (void *bl)
* Function : void NCR5380_dma_complete (struct Scsi_Host *instance)
*
* Purpose : Called by interrupt handler when DMA finishes or a phase
- * mismatch occurs (which would finish the DMA transfer).
+ * mismatch occurs (which would finish the DMA transfer).
*
* Inputs : instance - this instance of the NCR5380.
*
*/
-static void NCR5380_dma_complete( struct Scsi_Host *instance )
+static void NCR5380_dma_complete(struct Scsi_Host *instance)
{
- SETUP_HOSTDATA(instance);
- int transfered, saved_data = 0, overrun = 0, cnt, toPIO;
- unsigned char **data, p;
- volatile int *count;
-
- if (!hostdata->connected) {
- printk(KERN_WARNING "scsi%d: received end of DMA interrupt with "
- "no connected cmd\n", HOSTNO);
- return;
- }
-
- if (atari_read_overruns) {
- p = hostdata->connected->SCp.phase;
- if (p & SR_IO) {
- udelay(10);
- if ((((NCR5380_read(BUS_AND_STATUS_REG)) &
- (BASR_PHASE_MATCH|BASR_ACK)) ==
- (BASR_PHASE_MATCH|BASR_ACK))) {
- saved_data = NCR5380_read(INPUT_DATA_REG);
- overrun = 1;
- DMA_PRINTK("scsi%d: read overrun handled\n", HOSTNO);
- }
+ SETUP_HOSTDATA(instance);
+ int transfered, saved_data = 0, overrun = 0, cnt, toPIO;
+ unsigned char **data, p;
+ volatile int *count;
+
+ if (!hostdata->connected) {
+ printk(KERN_WARNING "scsi%d: received end of DMA interrupt with "
+ "no connected cmd\n", HOSTNO);
+ return;
}
- }
-
- DMA_PRINTK("scsi%d: real DMA transfer complete, basr 0x%X, sr 0x%X\n",
- HOSTNO, NCR5380_read(BUS_AND_STATUS_REG),
- NCR5380_read(STATUS_REG));
-
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- transfered = hostdata->dma_len - NCR5380_dma_residual(instance);
- hostdata->dma_len = 0;
-
- data = (unsigned char **) &(hostdata->connected->SCp.ptr);
- count = &(hostdata->connected->SCp.this_residual);
- *data += transfered;
- *count -= transfered;
-
- if (atari_read_overruns) {
- if ((NCR5380_read(STATUS_REG) & PHASE_MASK) == p && (p & SR_IO)) {
- cnt = toPIO = atari_read_overruns;
- if (overrun) {
- DMA_PRINTK("Got an input overrun, using saved byte\n");
- *(*data)++ = saved_data;
- (*count)--;
- cnt--;
- toPIO--;
- }
- DMA_PRINTK("Doing %d-byte PIO to 0x%08lx\n", cnt, (long)*data);
- NCR5380_transfer_pio(instance, &p, &cnt, data);
- *count -= toPIO - cnt;
+
+ if (atari_read_overruns) {
+ p = hostdata->connected->SCp.phase;
+ if (p & SR_IO) {
+ udelay(10);
+ if ((NCR5380_read(BUS_AND_STATUS_REG) &
+ (BASR_PHASE_MATCH|BASR_ACK)) ==
+ (BASR_PHASE_MATCH|BASR_ACK)) {
+ saved_data = NCR5380_read(INPUT_DATA_REG);
+ overrun = 1;
+ DMA_PRINTK("scsi%d: read overrun handled\n", HOSTNO);
+ }
+ }
+ }
+
+ DMA_PRINTK("scsi%d: real DMA transfer complete, basr 0x%X, sr 0x%X\n",
+ HOSTNO, NCR5380_read(BUS_AND_STATUS_REG),
+ NCR5380_read(STATUS_REG));
+
+ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+
+ transfered = hostdata->dma_len - NCR5380_dma_residual(instance);
+ hostdata->dma_len = 0;
+
+ data = (unsigned char **)&hostdata->connected->SCp.ptr;
+ count = &hostdata->connected->SCp.this_residual;
+ *data += transfered;
+ *count -= transfered;
+
+ if (atari_read_overruns) {
+ if ((NCR5380_read(STATUS_REG) & PHASE_MASK) == p && (p & SR_IO)) {
+ cnt = toPIO = atari_read_overruns;
+ if (overrun) {
+ DMA_PRINTK("Got an input overrun, using saved byte\n");
+ *(*data)++ = saved_data;
+ (*count)--;
+ cnt--;
+ toPIO--;
+ }
+ DMA_PRINTK("Doing %d-byte PIO to 0x%08lx\n", cnt, (long)*data);
+ NCR5380_transfer_pio(instance, &p, &cnt, data);
+ *count -= toPIO - cnt;
+ }
}
- }
}
#endif /* REAL_DMA */
/*
* Function : void NCR5380_intr (int irq)
- *
+ *
* Purpose : handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses
- * from the disconnected queue, and restarting NCR5380_main()
+ * from the disconnected queue, and restarting NCR5380_main()
* as required.
*
* Inputs : int irq, irq that caused this interrupt.
*
*/
-static irqreturn_t NCR5380_intr (int irq, void *dev_id)
+static irqreturn_t NCR5380_intr(int irq, void *dev_id)
{
- struct Scsi_Host *instance = first_instance;
- int done = 1, handled = 0;
- unsigned char basr;
-
- INT_PRINTK("scsi%d: NCR5380 irq triggered\n", HOSTNO);
-
- /* Look for pending interrupts */
- basr = NCR5380_read(BUS_AND_STATUS_REG);
- INT_PRINTK("scsi%d: BASR=%02x\n", HOSTNO, basr);
- /* dispatch to appropriate routine if found and done=0 */
- if (basr & BASR_IRQ) {
- NCR_PRINT(NDEBUG_INTR);
- if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
- done = 0;
- ENABLE_IRQ();
- INT_PRINTK("scsi%d: SEL interrupt\n", HOSTNO);
- NCR5380_reselect(instance);
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- }
- else if (basr & BASR_PARITY_ERROR) {
- INT_PRINTK("scsi%d: PARITY interrupt\n", HOSTNO);
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- }
- else if ((NCR5380_read(STATUS_REG) & SR_RST) == SR_RST) {
- INT_PRINTK("scsi%d: RESET interrupt\n", HOSTNO);
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- }
- else {
- /*
- * The rest of the interrupt conditions can occur only during a
- * DMA transfer
- */
+ struct Scsi_Host *instance = first_instance;
+ int done = 1, handled = 0;
+ unsigned char basr;
+
+ INT_PRINTK("scsi%d: NCR5380 irq triggered\n", HOSTNO);
+
+ /* Look for pending interrupts */
+ basr = NCR5380_read(BUS_AND_STATUS_REG);
+ INT_PRINTK("scsi%d: BASR=%02x\n", HOSTNO, basr);
+ /* dispatch to appropriate routine if found and done=0 */
+ if (basr & BASR_IRQ) {
+ NCR_PRINT(NDEBUG_INTR);
+ if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
+ done = 0;
+ ENABLE_IRQ();
+ INT_PRINTK("scsi%d: SEL interrupt\n", HOSTNO);
+ NCR5380_reselect(instance);
+ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ } else if (basr & BASR_PARITY_ERROR) {
+ INT_PRINTK("scsi%d: PARITY interrupt\n", HOSTNO);
+ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ } else if ((NCR5380_read(STATUS_REG) & SR_RST) == SR_RST) {
+ INT_PRINTK("scsi%d: RESET interrupt\n", HOSTNO);
+ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ } else {
+ /*
+ * The rest of the interrupt conditions can occur only during a
+ * DMA transfer
+ */
#if defined(REAL_DMA)
- /*
- * We should only get PHASE MISMATCH and EOP interrupts if we have
- * DMA enabled, so do a sanity check based on the current setting
- * of the MODE register.
- */
-
- if ((NCR5380_read(MODE_REG) & MR_DMA_MODE) &&
- ((basr & BASR_END_DMA_TRANSFER) ||
- !(basr & BASR_PHASE_MATCH))) {
-
- INT_PRINTK("scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
- NCR5380_dma_complete( instance );
- done = 0;
- ENABLE_IRQ();
- } else
+ /*
+ * We should only get PHASE MISMATCH and EOP interrupts if we have
+ * DMA enabled, so do a sanity check based on the current setting
+ * of the MODE register.
+ */
+
+ if ((NCR5380_read(MODE_REG) & MR_DMA_MODE) &&
+ ((basr & BASR_END_DMA_TRANSFER) ||
+ !(basr & BASR_PHASE_MATCH))) {
+
+ INT_PRINTK("scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
+ NCR5380_dma_complete( instance );
+ done = 0;
+ ENABLE_IRQ();
+ } else
#endif /* REAL_DMA */
- {
+ {
/* MS: Ignore unknown phase mismatch interrupts (caused by EOP interrupt) */
- if (basr & BASR_PHASE_MATCH)
- printk(KERN_NOTICE "scsi%d: unknown interrupt, "
- "BASR 0x%x, MR 0x%x, SR 0x%x\n",
- HOSTNO, basr, NCR5380_read(MODE_REG),
- NCR5380_read(STATUS_REG));
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- }
- } /* if !(SELECTION || PARITY) */
- handled = 1;
- } /* BASR & IRQ */
- else {
- printk(KERN_NOTICE "scsi%d: interrupt without IRQ bit set in BASR, "
- "BASR 0x%X, MR 0x%X, SR 0x%x\n", HOSTNO, basr,
- NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG));
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- }
-
- if (!done) {
- INT_PRINTK("scsi%d: in int routine, calling main\n", HOSTNO);
- /* Put a call to NCR5380_main() on the queue... */
- queue_main();
- }
- return IRQ_RETVAL(handled);
+ if (basr & BASR_PHASE_MATCH)
+ printk(KERN_NOTICE "scsi%d: unknown interrupt, "
+ "BASR 0x%x, MR 0x%x, SR 0x%x\n",
+ HOSTNO, basr, NCR5380_read(MODE_REG),
+ NCR5380_read(STATUS_REG));
+ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ }
+ } /* if !(SELECTION || PARITY) */
+ handled = 1;
+ } /* BASR & IRQ */ else {
+ printk(KERN_NOTICE "scsi%d: interrupt without IRQ bit set in BASR, "
+ "BASR 0x%X, MR 0x%X, SR 0x%x\n", HOSTNO, basr,
+ NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG));
+ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ }
+
+ if (!done) {
+ INT_PRINTK("scsi%d: in int routine, calling main\n", HOSTNO);
+ /* Put a call to NCR5380_main() on the queue... */
+ queue_main();
+ }
+ return IRQ_RETVAL(handled);
}
#ifdef NCR5380_STATS
-static void collect_stats(struct NCR5380_hostdata* hostdata, Scsi_Cmnd* cmd)
+static void collect_stats(struct NCR5380_hostdata* hostdata, Scsi_Cmnd *cmd)
{
# ifdef NCR5380_STAT_LIMIT
- if (cmd->request_bufflen > NCR5380_STAT_LIMIT)
+ if (cmd->request_bufflen > NCR5380_STAT_LIMIT)
# endif
- switch (cmd->cmnd[0])
- {
- case WRITE:
- case WRITE_6:
- case WRITE_10:
- hostdata->time_write[cmd->device->id] += (jiffies - hostdata->timebase);
- /*hostdata->bytes_write[cmd->device->id] += cmd->request_bufflen;*/
- hostdata->pendingw--;
- break;
- case READ:
- case READ_6:
- case READ_10:
- hostdata->time_read[cmd->device->id] += (jiffies - hostdata->timebase);
- /*hostdata->bytes_read[cmd->device->id] += cmd->request_bufflen;*/
- hostdata->pendingr--;
- break;
- }
+ switch (cmd->cmnd[0]) {
+ case WRITE:
+ case WRITE_6:
+ case WRITE_10:
+ hostdata->time_write[cmd->device->id] += (jiffies - hostdata->timebase);
+ /*hostdata->bytes_write[cmd->device->id] += cmd->request_bufflen;*/
+ hostdata->pendingw--;
+ break;
+ case READ:
+ case READ_6:
+ case READ_10:
+ hostdata->time_read[cmd->device->id] += (jiffies - hostdata->timebase);
+ /*hostdata->bytes_read[cmd->device->id] += cmd->request_bufflen;*/
+ hostdata->pendingr--;
+ break;
+ }
}
#endif
-/*
- * Function : int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd,
+/*
+ * Function : int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd,
* int tag);
*
* Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
- * including ARBITRATION, SELECTION, and initial message out for
- * IDENTIFY and queue messages.
+ * including ARBITRATION, SELECTION, and initial message out for
+ * IDENTIFY and queue messages.
*
- * Inputs : instance - instantiation of the 5380 driver on which this
- * target lives, cmd - SCSI command to execute, tag - set to TAG_NEXT for
- * new tag, TAG_NONE for untagged queueing, otherwise set to the tag for
+ * Inputs : instance - instantiation of the 5380 driver on which this
+ * target lives, cmd - SCSI command to execute, tag - set to TAG_NEXT for
+ * new tag, TAG_NONE for untagged queueing, otherwise set to the tag for
* the command that is presently connected.
- *
+ *
* Returns : -1 if selection could not execute for some reason,
- * 0 if selection succeeded or failed because the target
- * did not respond.
+ * 0 if selection succeeded or failed because the target
+ * did not respond.
*
- * Side effects :
- * If bus busy, arbitration failed, etc, NCR5380_select() will exit
+ * Side effects :
+ * If bus busy, arbitration failed, etc, NCR5380_select() will exit
* with registers as they should have been on entry - ie
* SELECT_ENABLE will be set appropriately, the NCR5380
* will cease to drive any SCSI bus signals.
*
- * If successful : I_T_L or I_T_L_Q nexus will be established,
- * instance->connected will be set to cmd.
- * SELECT interrupt will be disabled.
+ * If successful : I_T_L or I_T_L_Q nexus will be established,
+ * instance->connected will be set to cmd.
+ * SELECT interrupt will be disabled.
*
- * If failed (no target) : cmd->scsi_done() will be called, and the
+ * If failed (no target) : cmd->scsi_done() will be called, and the
* cmd->result host byte set to DID_BAD_TARGET.
*/
-static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag)
+static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag)
{
- SETUP_HOSTDATA(instance);
- unsigned char tmp[3], phase;
- unsigned char *data;
- int len;
- unsigned long timeout;
- unsigned long flags;
-
- hostdata->restart_select = 0;
- NCR_PRINT(NDEBUG_ARBITRATION);
- ARB_PRINTK("scsi%d: starting arbitration, id = %d\n", HOSTNO,
- instance->this_id);
-
- /*
- * Set the phase bits to 0, otherwise the NCR5380 won't drive the
- * data bus during SELECTION.
- */
-
- local_irq_save(flags);
- if (hostdata->connected) {
- local_irq_restore(flags);
- return -1;
- }
- NCR5380_write(TARGET_COMMAND_REG, 0);
+ SETUP_HOSTDATA(instance);
+ unsigned char tmp[3], phase;
+ unsigned char *data;
+ int len;
+ unsigned long timeout;
+ unsigned long flags;
+
+ hostdata->restart_select = 0;
+ NCR_PRINT(NDEBUG_ARBITRATION);
+ ARB_PRINTK("scsi%d: starting arbitration, id = %d\n", HOSTNO,
+ instance->this_id);
+
+ /*
+ * Set the phase bits to 0, otherwise the NCR5380 won't drive the
+ * data bus during SELECTION.
+ */
+
+ local_irq_save(flags);
+ if (hostdata->connected) {
+ local_irq_restore(flags);
+ return -1;
+ }
+ NCR5380_write(TARGET_COMMAND_REG, 0);
+ /*
+ * Start arbitration.
+ */
- /*
- * Start arbitration.
- */
-
- NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
- NCR5380_write(MODE_REG, MR_ARBITRATE);
+ NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
+ NCR5380_write(MODE_REG, MR_ARBITRATE);
- local_irq_restore(flags);
+ local_irq_restore(flags);
- /* Wait for arbitration logic to complete */
+ /* Wait for arbitration logic to complete */
#if defined(NCR_TIMEOUT)
- {
- unsigned long timeout = jiffies + 2*NCR_TIMEOUT;
-
- while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS)
- && time_before(jiffies, timeout) && !hostdata->connected)
- ;
- if (time_after_eq(jiffies, timeout))
- {
- printk("scsi : arbitration timeout at %d\n", __LINE__);
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
- }
- }
+ {
+ unsigned long timeout = jiffies + 2*NCR_TIMEOUT;
+
+ while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS) &&
+ time_before(jiffies, timeout) && !hostdata->connected)
+ ;
+ if (time_after_eq(jiffies, timeout)) {
+ printk("scsi : arbitration timeout at %d\n", __LINE__);
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ return -1;
+ }
+ }
#else /* NCR_TIMEOUT */
- while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS)
- && !hostdata->connected);
+ while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS) &&
+ !hostdata->connected)
+ ;
#endif
- ARB_PRINTK("scsi%d: arbitration complete\n", HOSTNO);
-
- if (hostdata->connected) {
- NCR5380_write(MODE_REG, MR_BASE);
- return -1;
- }
- /*
- * The arbitration delay is 2.2us, but this is a minimum and there is
- * no maximum so we can safely sleep for ceil(2.2) usecs to accommodate
- * the integral nature of udelay().
- *
- */
-
- udelay(3);
-
- /* Check for lost arbitration */
- if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
- (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) ||
- (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
- hostdata->connected) {
- NCR5380_write(MODE_REG, MR_BASE);
- ARB_PRINTK("scsi%d: lost arbitration, deasserting MR_ARBITRATE\n",
- HOSTNO);
- return -1;
- }
-
- /* after/during arbitration, BSY should be asserted.
- IBM DPES-31080 Version S31Q works now */
- /* Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman) */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_SEL |
- ICR_ASSERT_BSY ) ;
-
- if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
- hostdata->connected) {
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- ARB_PRINTK("scsi%d: lost arbitration, deasserting ICR_ASSERT_SEL\n",
- HOSTNO);
- return -1;
- }
+ ARB_PRINTK("scsi%d: arbitration complete\n", HOSTNO);
+
+ if (hostdata->connected) {
+ NCR5380_write(MODE_REG, MR_BASE);
+ return -1;
+ }
+ /*
+ * The arbitration delay is 2.2us, but this is a minimum and there is
+ * no maximum so we can safely sleep for ceil(2.2) usecs to accommodate
+ * the integral nature of udelay().
+ *
+ */
+
+ udelay(3);
+
+ /* Check for lost arbitration */
+ if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
+ (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) ||
+ (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
+ hostdata->connected) {
+ NCR5380_write(MODE_REG, MR_BASE);
+ ARB_PRINTK("scsi%d: lost arbitration, deasserting MR_ARBITRATE\n",
+ HOSTNO);
+ return -1;
+ }
- /*
- * Again, bus clear + bus settle time is 1.2us, however, this is
- * a minimum so we'll udelay ceil(1.2)
- */
+ /* after/during arbitration, BSY should be asserted.
+ IBM DPES-31080 Version S31Q works now */
+ /* Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman) */
+ NCR5380_write(INITIATOR_COMMAND_REG,
+ ICR_BASE | ICR_ASSERT_SEL | ICR_ASSERT_BSY);
+
+ if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
+ hostdata->connected) {
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ ARB_PRINTK("scsi%d: lost arbitration, deasserting ICR_ASSERT_SEL\n",
+ HOSTNO);
+ return -1;
+ }
+
+ /*
+ * Again, bus clear + bus settle time is 1.2us, however, this is
+ * a minimum so we'll udelay ceil(1.2)
+ */
#ifdef CONFIG_ATARI_SCSI_TOSHIBA_DELAY
- /* ++roman: But some targets (see above :-) seem to need a bit more... */
- udelay(15);
+ /* ++roman: But some targets (see above :-) seem to need a bit more... */
+ udelay(15);
#else
- udelay(2);
+ udelay(2);
#endif
-
- if (hostdata->connected) {
+
+ if (hostdata->connected) {
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ return -1;
+ }
+
+ ARB_PRINTK("scsi%d: won arbitration\n", HOSTNO);
+
+ /*
+ * Now that we have won arbitration, start Selection process, asserting
+ * the host and target ID's on the SCSI bus.
+ */
+
+ NCR5380_write(OUTPUT_DATA_REG, (hostdata->id_mask | (1 << cmd->device->id)));
+
+ /*
+ * Raise ATN while SEL is true before BSY goes false from arbitration,
+ * since this is the only way to guarantee that we'll get a MESSAGE OUT
+ * phase immediately after selection.
+ */
+
+ NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_BSY |
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL ));
NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- return -1;
- }
- ARB_PRINTK("scsi%d: won arbitration\n", HOSTNO);
+ /*
+ * Reselect interrupts must be turned off prior to the dropping of BSY,
+ * otherwise we will trigger an interrupt.
+ */
+
+ if (hostdata->connected) {
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ return -1;
+ }
+
+ NCR5380_write(SELECT_ENABLE_REG, 0);
- /*
- * Now that we have won arbitration, start Selection process, asserting
- * the host and target ID's on the SCSI bus.
- */
+ /*
+ * The initiator shall then wait at least two deskew delays and release
+ * the BSY signal.
+ */
+ udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */
+
+ /* Reset BSY */
+ NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA |
+ ICR_ASSERT_ATN | ICR_ASSERT_SEL));
+
+ /*
+ * Something weird happens when we cease to drive BSY - looks
+ * like the board/chip is letting us do another read before the
+ * appropriate propagation delay has expired, and we're confusing
+ * a BSY signal from ourselves as the target's response to SELECTION.
+ *
+ * A small delay (the 'C++' frontend breaks the pipeline with an
+ * unnecessary jump, making it work on my 386-33/Trantor T128, the
+ * tighter 'C' code breaks and requires this) solves the problem -
+ * the 1 us delay is arbitrary, and only used because this delay will
+ * be the same on other platforms and since it works here, it should
+ * work there.
+ *
+ * wingel suggests that this could be due to failing to wait
+ * one deskew delay.
+ */
- NCR5380_write(OUTPUT_DATA_REG, (hostdata->id_mask | (1 << cmd->device->id)));
+ udelay(1);
- /*
- * Raise ATN while SEL is true before BSY goes false from arbitration,
- * since this is the only way to guarantee that we'll get a MESSAGE OUT
- * phase immediately after selection.
- */
+ SEL_PRINTK("scsi%d: selecting target %d\n", HOSTNO, cmd->device->id);
- NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_BSY |
- ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL ));
- NCR5380_write(MODE_REG, MR_BASE);
+ /*
+ * The SCSI specification calls for a 250 ms timeout for the actual
+ * selection.
+ */
- /*
- * Reselect interrupts must be turned off prior to the dropping of BSY,
- * otherwise we will trigger an interrupt.
- */
+ timeout = jiffies + 25;
- if (hostdata->connected) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- return -1;
- }
-
- NCR5380_write(SELECT_ENABLE_REG, 0);
-
- /*
- * The initiator shall then wait at least two deskew delays and release
- * the BSY signal.
- */
- udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */
-
- /* Reset BSY */
- NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA |
- ICR_ASSERT_ATN | ICR_ASSERT_SEL));
-
- /*
- * Something weird happens when we cease to drive BSY - looks
- * like the board/chip is letting us do another read before the
- * appropriate propagation delay has expired, and we're confusing
- * a BSY signal from ourselves as the target's response to SELECTION.
- *
- * A small delay (the 'C++' frontend breaks the pipeline with an
- * unnecessary jump, making it work on my 386-33/Trantor T128, the
- * tighter 'C' code breaks and requires this) solves the problem -
- * the 1 us delay is arbitrary, and only used because this delay will
- * be the same on other platforms and since it works here, it should
- * work there.
- *
- * wingel suggests that this could be due to failing to wait
- * one deskew delay.
- */
-
- udelay(1);
-
- SEL_PRINTK("scsi%d: selecting target %d\n", HOSTNO, cmd->device->id);
-
- /*
- * The SCSI specification calls for a 250 ms timeout for the actual
- * selection.
- */
-
- timeout = jiffies + 25;
-
- /*
- * XXX very interesting - we're seeing a bounce where the BSY we
- * asserted is being reflected / still asserted (propagation delay?)
- * and it's detecting as true. Sigh.
- */
+ /*
+ * XXX very interesting - we're seeing a bounce where the BSY we
+ * asserted is being reflected / still asserted (propagation delay?)
+ * and it's detecting as true. Sigh.
+ */
#if 0
- /* ++roman: If a target conformed to the SCSI standard, it wouldn't assert
- * IO while SEL is true. But again, there are some disks out the in the
- * world that do that nevertheless. (Somebody claimed that this announces
- * reselection capability of the target.) So we better skip that test and
- * only wait for BSY... (Famous german words: Der Klügere gibt nach :-)
- */
-
- while (time_before(jiffies, timeout) && !(NCR5380_read(STATUS_REG) &
- (SR_BSY | SR_IO)));
-
- if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) ==
- (SR_SEL | SR_IO)) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- NCR5380_reselect(instance);
- printk (KERN_ERR "scsi%d: reselection after won arbitration?\n",
- HOSTNO);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
- }
+ /* ++roman: If a target conformed to the SCSI standard, it wouldn't assert
+ * IO while SEL is true. But again, there are some disks out the in the
+ * world that do that nevertheless. (Somebody claimed that this announces
+ * reselection capability of the target.) So we better skip that test and
+ * only wait for BSY... (Famous german words: Der Klügere gibt nach :-)
+ */
+
+ while (time_before(jiffies, timeout) &&
+ !(NCR5380_read(STATUS_REG) & (SR_BSY | SR_IO)))
+ ;
+
+ if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ NCR5380_reselect(instance);
+ printk(KERN_ERR "scsi%d: reselection after won arbitration?\n",
+ HOSTNO);
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ return -1;
+ }
#else
- while (time_before(jiffies, timeout) && !(NCR5380_read(STATUS_REG) & SR_BSY));
+ while (time_before(jiffies, timeout) && !(NCR5380_read(STATUS_REG) & SR_BSY))
+ ;
#endif
- /*
- * No less than two deskew delays after the initiator detects the
- * BSY signal is true, it shall release the SEL signal and may
- * change the DATA BUS. -wingel
- */
+ /*
+ * No less than two deskew delays after the initiator detects the
+ * BSY signal is true, it shall release the SEL signal and may
+ * change the DATA BUS. -wingel
+ */
- udelay(1);
+ udelay(1);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
- if (!(NCR5380_read(STATUS_REG) & SR_BSY)) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- if (hostdata->targets_present & (1 << cmd->device->id)) {
- printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO);
- if (hostdata->restart_select)
- printk(KERN_NOTICE "\trestart select\n");
- NCR_PRINT(NDEBUG_ANY);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
- }
- cmd->result = DID_BAD_TARGET << 16;
+ if (!(NCR5380_read(STATUS_REG) & SR_BSY)) {
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ if (hostdata->targets_present & (1 << cmd->device->id)) {
+ printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO);
+ if (hostdata->restart_select)
+ printk(KERN_NOTICE "\trestart select\n");
+ NCR_PRINT(NDEBUG_ANY);
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ return -1;
+ }
+ cmd->result = DID_BAD_TARGET << 16;
#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
+ collect_stats(hostdata, cmd);
#endif
#ifdef SUPPORT_TAGS
- cmd_free_tag( cmd );
+ cmd_free_tag(cmd);
#endif
- cmd->scsi_done(cmd);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- SEL_PRINTK("scsi%d: target did not respond within 250ms\n", HOSTNO);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return 0;
- }
-
- hostdata->targets_present |= (1 << cmd->device->id);
-
- /*
- * Since we followed the SCSI spec, and raised ATN while SEL
- * was true but before BSY was false during selection, the information
- * transfer phase should be a MESSAGE OUT phase so that we can send the
- * IDENTIFY message.
- *
- * If SCSI-II tagged queuing is enabled, we also send a SIMPLE_QUEUE_TAG
- * message (2 bytes) with a tag ID that we increment with every command
- * until it wraps back to 0.
- *
- * XXX - it turns out that there are some broken SCSI-II devices,
- * which claim to support tagged queuing but fail when more than
- * some number of commands are issued at once.
- */
-
- /* Wait for start of REQ/ACK handshake */
- while (!(NCR5380_read(STATUS_REG) & SR_REQ));
-
- SEL_PRINTK("scsi%d: target %d selected, going into MESSAGE OUT phase.\n",
- HOSTNO, cmd->device->id);
- tmp[0] = IDENTIFY(1, cmd->device->lun);
+ cmd->scsi_done(cmd);
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ SEL_PRINTK("scsi%d: target did not respond within 250ms\n", HOSTNO);
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ return 0;
+ }
+
+ hostdata->targets_present |= (1 << cmd->device->id);
+
+ /*
+ * Since we followed the SCSI spec, and raised ATN while SEL
+ * was true but before BSY was false during selection, the information
+ * transfer phase should be a MESSAGE OUT phase so that we can send the
+ * IDENTIFY message.
+ *
+ * If SCSI-II tagged queuing is enabled, we also send a SIMPLE_QUEUE_TAG
+ * message (2 bytes) with a tag ID that we increment with every command
+ * until it wraps back to 0.
+ *
+ * XXX - it turns out that there are some broken SCSI-II devices,
+ * which claim to support tagged queuing but fail when more than
+ * some number of commands are issued at once.
+ */
+
+ /* Wait for start of REQ/ACK handshake */
+ while (!(NCR5380_read(STATUS_REG) & SR_REQ))
+ ;
+
+ SEL_PRINTK("scsi%d: target %d selected, going into MESSAGE OUT phase.\n",
+ HOSTNO, cmd->device->id);
+ tmp[0] = IDENTIFY(1, cmd->device->lun);
#ifdef SUPPORT_TAGS
- if (cmd->tag != TAG_NONE) {
- tmp[1] = hostdata->last_message = SIMPLE_QUEUE_TAG;
- tmp[2] = cmd->tag;
- len = 3;
- } else
- len = 1;
+ if (cmd->tag != TAG_NONE) {
+ tmp[1] = hostdata->last_message = SIMPLE_QUEUE_TAG;
+ tmp[2] = cmd->tag;
+ len = 3;
+ } else
+ len = 1;
#else
- len = 1;
- cmd->tag=0;
+ len = 1;
+ cmd->tag = 0;
#endif /* SUPPORT_TAGS */
- /* Send message(s) */
- data = tmp;
- phase = PHASE_MSGOUT;
- NCR5380_transfer_pio(instance, &phase, &len, &data);
- SEL_PRINTK("scsi%d: nexus established.\n", HOSTNO);
- /* XXX need to handle errors here */
- hostdata->connected = cmd;
+ /* Send message(s) */
+ data = tmp;
+ phase = PHASE_MSGOUT;
+ NCR5380_transfer_pio(instance, &phase, &len, &data);
+ SEL_PRINTK("scsi%d: nexus established.\n", HOSTNO);
+ /* XXX need to handle errors here */
+ hostdata->connected = cmd;
#ifndef SUPPORT_TAGS
- hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
-#endif
-
- initialize_SCp(cmd);
+ hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
+#endif
+ initialize_SCp(cmd);
- return 0;
+ return 0;
}
-/*
- * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance,
+/*
+ * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance,
* unsigned char *phase, int *count, unsigned char **data)
*
* Purpose : transfers data in given phase using polled I/O
*
- * Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
+ * Inputs : instance - instance of driver, *phase - pointer to
+ * what phase is expected, *count - pointer to number of
* bytes to transfer, **data - pointer to data pointer.
- *
+ *
* Returns : -1 when different phase is entered without transferring
* maximum number of bytes, 0 if all bytes are transfered or exit
* is in same phase.
*
- * Also, *phase, *count, *data are modified in place.
+ * Also, *phase, *count, *data are modified in place.
*
* XXX Note : handling for bus free may be useful.
*/
/*
- * Note : this code is not as quick as it could be, however it
+ * Note : this code is not as quick as it could be, however it
* IS 100% reliable, and for the actual data transfer where speed
* counts, we will always do a pseudo DMA or DMA transfer.
*/
-static int NCR5380_transfer_pio( struct Scsi_Host *instance,
- unsigned char *phase, int *count,
- unsigned char **data)
+static int NCR5380_transfer_pio(struct Scsi_Host *instance,
+ unsigned char *phase, int *count,
+ unsigned char **data)
{
- register unsigned char p = *phase, tmp;
- register int c = *count;
- register unsigned char *d = *data;
-
- /*
- * The NCR5380 chip will only drive the SCSI bus when the
- * phase specified in the appropriate bits of the TARGET COMMAND
- * REGISTER match the STATUS REGISTER
- */
-
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
-
- do {
- /*
- * Wait for assertion of REQ, after which the phase bits will be
- * valid
+ register unsigned char p = *phase, tmp;
+ register int c = *count;
+ register unsigned char *d = *data;
+
+ /*
+ * The NCR5380 chip will only drive the SCSI bus when the
+ * phase specified in the appropriate bits of the TARGET COMMAND
+ * REGISTER match the STATUS REGISTER
*/
- while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ));
- HSH_PRINTK("scsi%d: REQ detected\n", HOSTNO);
+ NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
- /* Check for phase mismatch */
- if ((tmp & PHASE_MASK) != p) {
- PIO_PRINTK("scsi%d: phase mismatch\n", HOSTNO);
- NCR_PRINT_PHASE(NDEBUG_PIO);
- break;
- }
+ do {
+ /*
+ * Wait for assertion of REQ, after which the phase bits will be
+ * valid
+ */
+ while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ))
+ ;
- /* Do actual transfer from SCSI bus to / from memory */
- if (!(p & SR_IO))
- NCR5380_write(OUTPUT_DATA_REG, *d);
- else
- *d = NCR5380_read(CURRENT_SCSI_DATA_REG);
+ HSH_PRINTK("scsi%d: REQ detected\n", HOSTNO);
- ++d;
+ /* Check for phase mismatch */
+ if ((tmp & PHASE_MASK) != p) {
+ PIO_PRINTK("scsi%d: phase mismatch\n", HOSTNO);
+ NCR_PRINT_PHASE(NDEBUG_PIO);
+ break;
+ }
- /*
- * The SCSI standard suggests that in MSGOUT phase, the initiator
- * should drop ATN on the last byte of the message phase
- * after REQ has been asserted for the handshake but before
- * the initiator raises ACK.
- */
+ /* Do actual transfer from SCSI bus to / from memory */
+ if (!(p & SR_IO))
+ NCR5380_write(OUTPUT_DATA_REG, *d);
+ else
+ *d = NCR5380_read(CURRENT_SCSI_DATA_REG);
- if (!(p & SR_IO)) {
- if (!((p & SR_MSG) && c > 1)) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA);
- NCR_PRINT(NDEBUG_PIO);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA | ICR_ASSERT_ACK);
- } else {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA | ICR_ASSERT_ATN);
- NCR_PRINT(NDEBUG_PIO);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
- }
- } else {
- NCR_PRINT(NDEBUG_PIO);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
- }
+ ++d;
- while (NCR5380_read(STATUS_REG) & SR_REQ);
+ /*
+ * The SCSI standard suggests that in MSGOUT phase, the initiator
+ * should drop ATN on the last byte of the message phase
+ * after REQ has been asserted for the handshake but before
+ * the initiator raises ACK.
+ */
- HSH_PRINTK("scsi%d: req false, handshake complete\n", HOSTNO);
+ if (!(p & SR_IO)) {
+ if (!((p & SR_MSG) && c > 1)) {
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA);
+ NCR_PRINT(NDEBUG_PIO);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
+ ICR_ASSERT_DATA | ICR_ASSERT_ACK);
+ } else {
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN);
+ NCR_PRINT(NDEBUG_PIO);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
+ }
+ } else {
+ NCR_PRINT(NDEBUG_PIO);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
+ }
-/*
- * We have several special cases to consider during REQ/ACK handshaking :
- * 1. We were in MSGOUT phase, and we are on the last byte of the
- * message. ATN must be dropped as ACK is dropped.
- *
- * 2. We are in a MSGIN phase, and we are on the last byte of the
- * message. We must exit with ACK asserted, so that the calling
- * code may raise ATN before dropping ACK to reject the message.
- *
- * 3. ACK and ATN are clear and the target may proceed as normal.
- */
- if (!(p == PHASE_MSGIN && c == 1)) {
- if (p == PHASE_MSGOUT && c > 1)
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
- else
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- }
- } while (--c);
-
- PIO_PRINTK("scsi%d: residual %d\n", HOSTNO, c);
-
- *count = c;
- *data = d;
- tmp = NCR5380_read(STATUS_REG);
- /* The phase read from the bus is valid if either REQ is (already)
- * asserted or if ACK hasn't been released yet. The latter is the case if
- * we're in MSGIN and all wanted bytes have been received. */
- if ((tmp & SR_REQ) || (p == PHASE_MSGIN && c == 0))
- *phase = tmp & PHASE_MASK;
- else
- *phase = PHASE_UNKNOWN;
-
- if (!c || (*phase == p))
- return 0;
- else
- return -1;
+ while (NCR5380_read(STATUS_REG) & SR_REQ)
+ ;
+
+ HSH_PRINTK("scsi%d: req false, handshake complete\n", HOSTNO);
+
+ /*
+ * We have several special cases to consider during REQ/ACK handshaking :
+ * 1. We were in MSGOUT phase, and we are on the last byte of the
+ * message. ATN must be dropped as ACK is dropped.
+ *
+ * 2. We are in a MSGIN phase, and we are on the last byte of the
+ * message. We must exit with ACK asserted, so that the calling
+ * code may raise ATN before dropping ACK to reject the message.
+ *
+ * 3. ACK and ATN are clear and the target may proceed as normal.
+ */
+ if (!(p == PHASE_MSGIN && c == 1)) {
+ if (p == PHASE_MSGOUT && c > 1)
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
+ else
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ }
+ } while (--c);
+
+ PIO_PRINTK("scsi%d: residual %d\n", HOSTNO, c);
+
+ *count = c;
+ *data = d;
+ tmp = NCR5380_read(STATUS_REG);
+ /* The phase read from the bus is valid if either REQ is (already)
+ * asserted or if ACK hasn't been released yet. The latter is the case if
+ * we're in MSGIN and all wanted bytes have been received.
+ */
+ if ((tmp & SR_REQ) || (p == PHASE_MSGIN && c == 0))
+ *phase = tmp & PHASE_MASK;
+ else
+ *phase = PHASE_UNKNOWN;
+
+ if (!c || (*phase == p))
+ return 0;
+ else
+ return -1;
}
/*
* Function : do_abort (Scsi_Host *host)
- *
- * Purpose : abort the currently established nexus. Should only be
- * called from a routine which can drop into a
- *
+ *
+ * Purpose : abort the currently established nexus. Should only be
+ * called from a routine which can drop into a
+ *
* Returns : 0 on success, -1 on failure.
*/
-static int do_abort (struct Scsi_Host *host)
+static int do_abort(struct Scsi_Host *host)
{
- unsigned char tmp, *msgptr, phase;
- int len;
-
- /* Request message out phase */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
-
- /*
- * Wait for the target to indicate a valid phase by asserting
- * REQ. Once this happens, we'll have either a MSGOUT phase
- * and can immediately send the ABORT message, or we'll have some
- * other phase and will have to source/sink data.
- *
- * We really don't care what value was on the bus or what value
- * the target sees, so we just handshake.
- */
-
- while (!(tmp = NCR5380_read(STATUS_REG)) & SR_REQ);
-
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
-
- if ((tmp & PHASE_MASK) != PHASE_MSGOUT) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
- ICR_ASSERT_ACK);
- while (NCR5380_read(STATUS_REG) & SR_REQ);
+ unsigned char tmp, *msgptr, phase;
+ int len;
+
+ /* Request message out phase */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
- }
-
- tmp = ABORT;
- msgptr = &tmp;
- len = 1;
- phase = PHASE_MSGOUT;
- NCR5380_transfer_pio (host, &phase, &len, &msgptr);
-
- /*
- * If we got here, and the command completed successfully,
- * we're about to go into bus free state.
- */
-
- return len ? -1 : 0;
+
+ /*
+ * Wait for the target to indicate a valid phase by asserting
+ * REQ. Once this happens, we'll have either a MSGOUT phase
+ * and can immediately send the ABORT message, or we'll have some
+ * other phase and will have to source/sink data.
+ *
+ * We really don't care what value was on the bus or what value
+ * the target sees, so we just handshake.
+ */
+
+ while (!(tmp = NCR5380_read(STATUS_REG)) & SR_REQ)
+ ;
+
+ NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
+
+ if ((tmp & PHASE_MASK) != PHASE_MSGOUT) {
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
+ ICR_ASSERT_ACK);
+ while (NCR5380_read(STATUS_REG) & SR_REQ)
+ ;
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
+ }
+
+ tmp = ABORT;
+ msgptr = &tmp;
+ len = 1;
+ phase = PHASE_MSGOUT;
+ NCR5380_transfer_pio(host, &phase, &len, &msgptr);
+
+ /*
+ * If we got here, and the command completed successfully,
+ * we're about to go into bus free state.
+ */
+
+ return len ? -1 : 0;
}
#if defined(REAL_DMA)
-/*
- * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
+/*
+ * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
* unsigned char *phase, int *count, unsigned char **data)
*
* Purpose : transfers data in given phase using either real
* or pseudo DMA.
*
- * Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
+ * Inputs : instance - instance of driver, *phase - pointer to
+ * what phase is expected, *count - pointer to number of
* bytes to transfer, **data - pointer to data pointer.
- *
+ *
* Returns : -1 when different phase is entered without transferring
* maximum number of bytes, 0 if all bytes or transfered or exit
* is in same phase.
*
- * Also, *phase, *count, *data are modified in place.
+ * Also, *phase, *count, *data are modified in place.
*
*/
-static int NCR5380_transfer_dma( struct Scsi_Host *instance,
- unsigned char *phase, int *count,
- unsigned char **data)
+static int NCR5380_transfer_dma(struct Scsi_Host *instance,
+ unsigned char *phase, int *count,
+ unsigned char **data)
{
- SETUP_HOSTDATA(instance);
- register int c = *count;
- register unsigned char p = *phase;
- register unsigned char *d = *data;
- unsigned char tmp;
- unsigned long flags;
-
- if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
- *phase = tmp;
- return -1;
- }
+ SETUP_HOSTDATA(instance);
+ register int c = *count;
+ register unsigned char p = *phase;
+ register unsigned char *d = *data;
+ unsigned char tmp;
+ unsigned long flags;
+
+ if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
+ *phase = tmp;
+ return -1;
+ }
- if (atari_read_overruns && (p & SR_IO)) {
- c -= atari_read_overruns;
- }
+ if (atari_read_overruns && (p & SR_IO))
+ c -= atari_read_overruns;
- DMA_PRINTK("scsi%d: initializing DMA for %s, %d bytes %s %p\n",
- HOSTNO, (p & SR_IO) ? "reading" : "writing",
- c, (p & SR_IO) ? "to" : "from", d);
+ DMA_PRINTK("scsi%d: initializing DMA for %s, %d bytes %s %p\n",
+ HOSTNO, (p & SR_IO) ? "reading" : "writing",
+ c, (p & SR_IO) ? "to" : "from", d);
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
+ NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
#ifdef REAL_DMA
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
#endif /* def REAL_DMA */
- if (IS_A_TT()) {
- /* On the Medusa, it is a must to initialize the DMA before
- * starting the NCR. This is also the cleaner way for the TT.
- */
- local_irq_save(flags);
- hostdata->dma_len = (p & SR_IO) ?
- NCR5380_dma_read_setup(instance, d, c) :
- NCR5380_dma_write_setup(instance, d, c);
- local_irq_restore(flags);
- }
-
- if (p & SR_IO)
- NCR5380_write(START_DMA_INITIATOR_RECEIVE_REG, 0);
- else {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA);
- NCR5380_write(START_DMA_SEND_REG, 0);
- }
-
- if (!IS_A_TT()) {
- /* On the Falcon, the DMA setup must be done after the last */
- /* NCR access, else the DMA setup gets trashed!
- */
- local_irq_save(flags);
- hostdata->dma_len = (p & SR_IO) ?
- NCR5380_dma_read_setup(instance, d, c) :
- NCR5380_dma_write_setup(instance, d, c);
- local_irq_restore(flags);
- }
- return 0;
+ if (IS_A_TT()) {
+ /* On the Medusa, it is a must to initialize the DMA before
+ * starting the NCR. This is also the cleaner way for the TT.
+ */
+ local_irq_save(flags);
+ hostdata->dma_len = (p & SR_IO) ?
+ NCR5380_dma_read_setup(instance, d, c) :
+ NCR5380_dma_write_setup(instance, d, c);
+ local_irq_restore(flags);
+ }
+
+ if (p & SR_IO)
+ NCR5380_write(START_DMA_INITIATOR_RECEIVE_REG, 0);
+ else {
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA);
+ NCR5380_write(START_DMA_SEND_REG, 0);
+ }
+
+ if (!IS_A_TT()) {
+ /* On the Falcon, the DMA setup must be done after the last */
+ /* NCR access, else the DMA setup gets trashed!
+ */
+ local_irq_save(flags);
+ hostdata->dma_len = (p & SR_IO) ?
+ NCR5380_dma_read_setup(instance, d, c) :
+ NCR5380_dma_write_setup(instance, d, c);
+ local_irq_restore(flags);
+ }
+ return 0;
}
#endif /* defined(REAL_DMA) */
/*
* Function : NCR5380_information_transfer (struct Scsi_Host *instance)
*
- * Purpose : run through the various SCSI phases and do as the target
- * directs us to. Operates on the currently connected command,
+ * Purpose : run through the various SCSI phases and do as the target
+ * directs us to. Operates on the currently connected command,
* instance->connected.
*
* Inputs : instance, instance for which we are doing commands
*
- * Side effects : SCSI things happen, the disconnected queue will be
+ * Side effects : SCSI things happen, the disconnected queue will be
* modified if a command disconnects, *instance->connected will
* change.
*
- * XXX Note : we need to watch for bus free or a reset condition here
- * to recover from an unexpected bus free condition.
+ * XXX Note : we need to watch for bus free or a reset condition here
+ * to recover from an unexpected bus free condition.
*/
-
-static void NCR5380_information_transfer (struct Scsi_Host *instance)
+
+static void NCR5380_information_transfer(struct Scsi_Host *instance)
{
- SETUP_HOSTDATA(instance);
- unsigned long flags;
- unsigned char msgout = NOP;
- int sink = 0;
- int len;
+ SETUP_HOSTDATA(instance);
+ unsigned long flags;
+ unsigned char msgout = NOP;
+ int sink = 0;
+ int len;
#if defined(REAL_DMA)
- int transfersize;
+ int transfersize;
#endif
- unsigned char *data;
- unsigned char phase, tmp, extended_msg[10], old_phase=0xff;
- Scsi_Cmnd *cmd = (Scsi_Cmnd *) hostdata->connected;
+ unsigned char *data;
+ unsigned char phase, tmp, extended_msg[10], old_phase = 0xff;
+ Scsi_Cmnd *cmd = (Scsi_Cmnd *) hostdata->connected;
+
+ while (1) {
+ tmp = NCR5380_read(STATUS_REG);
+ /* We only have a valid SCSI phase when REQ is asserted */
+ if (tmp & SR_REQ) {
+ phase = (tmp & PHASE_MASK);
+ if (phase != old_phase) {
+ old_phase = phase;
+ NCR_PRINT_PHASE(NDEBUG_INFORMATION);
+ }
- while (1) {
- tmp = NCR5380_read(STATUS_REG);
- /* We only have a valid SCSI phase when REQ is asserted */
- if (tmp & SR_REQ) {
- phase = (tmp & PHASE_MASK);
- if (phase != old_phase) {
- old_phase = phase;
- NCR_PRINT_PHASE(NDEBUG_INFORMATION);
- }
-
- if (sink && (phase != PHASE_MSGOUT)) {
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
-
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
- ICR_ASSERT_ACK);
- while (NCR5380_read(STATUS_REG) & SR_REQ);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_ATN);
- sink = 0;
- continue;
- }
-
- switch (phase) {
- case PHASE_DATAOUT:
+ if (sink && (phase != PHASE_MSGOUT)) {
+ NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
+
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
+ ICR_ASSERT_ACK);
+ while (NCR5380_read(STATUS_REG) & SR_REQ)
+ ;
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
+ ICR_ASSERT_ATN);
+ sink = 0;
+ continue;
+ }
+
+ switch (phase) {
+ case PHASE_DATAOUT:
#if (NDEBUG & NDEBUG_NO_DATAOUT)
- printk("scsi%d: NDEBUG_NO_DATAOUT set, attempted DATAOUT "
- "aborted\n", HOSTNO);
- sink = 1;
- do_abort(instance);
- cmd->result = DID_ERROR << 16;
- cmd->done(cmd);
- return;
+ printk("scsi%d: NDEBUG_NO_DATAOUT set, attempted DATAOUT "
+ "aborted\n", HOSTNO);
+ sink = 1;
+ do_abort(instance);
+ cmd->result = DID_ERROR << 16;
+ cmd->done(cmd);
+ return;
#endif
- case PHASE_DATAIN:
- /*
- * If there is no room left in the current buffer in the
- * scatter-gather list, move onto the next one.
- */
-
- if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
- ++cmd->SCp.buffer;
- --cmd->SCp.buffers_residual;
- cmd->SCp.this_residual = cmd->SCp.buffer->length;
- cmd->SCp.ptr = page_address(cmd->SCp.buffer->page)+
- cmd->SCp.buffer->offset;
- /* ++roman: Try to merge some scatter-buffers if
- * they are at contiguous physical addresses.
- */
- merge_contiguous_buffers( cmd );
- INF_PRINTK("scsi%d: %d bytes and %d buffers left\n",
- HOSTNO, cmd->SCp.this_residual,
- cmd->SCp.buffers_residual);
- }
-
- /*
- * The preferred transfer method is going to be
- * PSEUDO-DMA for systems that are strictly PIO,
- * since we can let the hardware do the handshaking.
- *
- * For this to work, we need to know the transfersize
- * ahead of time, since the pseudo-DMA code will sit
- * in an unconditional loop.
- */
-
-/* ++roman: I suggest, this should be
- * #if def(REAL_DMA)
- * instead of leaving REAL_DMA out.
- */
+ case PHASE_DATAIN:
+ /*
+ * If there is no room left in the current buffer in the
+ * scatter-gather list, move onto the next one.
+ */
+
+ if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
+ ++cmd->SCp.buffer;
+ --cmd->SCp.buffers_residual;
+ cmd->SCp.this_residual = cmd->SCp.buffer->length;
+ cmd->SCp.ptr = page_address(cmd->SCp.buffer->page) +
+ cmd->SCp.buffer->offset;
+ /* ++roman: Try to merge some scatter-buffers if
+ * they are at contiguous physical addresses.
+ */
+ merge_contiguous_buffers(cmd);
+ INF_PRINTK("scsi%d: %d bytes and %d buffers left\n",
+ HOSTNO, cmd->SCp.this_residual,
+ cmd->SCp.buffers_residual);
+ }
+
+ /*
+ * The preferred transfer method is going to be
+ * PSEUDO-DMA for systems that are strictly PIO,
+ * since we can let the hardware do the handshaking.
+ *
+ * For this to work, we need to know the transfersize
+ * ahead of time, since the pseudo-DMA code will sit
+ * in an unconditional loop.
+ */
+
+ /* ++roman: I suggest, this should be
+ * #if def(REAL_DMA)
+ * instead of leaving REAL_DMA out.
+ */
#if defined(REAL_DMA)
- if (!cmd->device->borken &&
- (transfersize = NCR5380_dma_xfer_len(instance,cmd,phase)) > 31) {
- len = transfersize;
- cmd->SCp.phase = phase;
- if (NCR5380_transfer_dma(instance, &phase,
- &len, (unsigned char **) &cmd->SCp.ptr)) {
- /*
- * If the watchdog timer fires, all future
- * accesses to this device will use the
- * polled-IO. */
- printk(KERN_NOTICE "scsi%d: switching target %d "
- "lun %d to slow handshake\n", HOSTNO,
- cmd->device->id, cmd->device->lun);
- cmd->device->borken = 1;
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_ATN);
- sink = 1;
- do_abort(instance);
- cmd->result = DID_ERROR << 16;
- cmd->done(cmd);
- /* XXX - need to source or sink data here, as appropriate */
- } else {
+ if (!cmd->device->borken &&
+ (transfersize = NCR5380_dma_xfer_len(instance,cmd,phase)) > 31) {
+ len = transfersize;
+ cmd->SCp.phase = phase;
+ if (NCR5380_transfer_dma(instance, &phase,
+ &len, (unsigned char **)&cmd->SCp.ptr)) {
+ /*
+ * If the watchdog timer fires, all future
+ * accesses to this device will use the
+ * polled-IO. */
+ printk(KERN_NOTICE "scsi%d: switching target %d "
+ "lun %d to slow handshake\n", HOSTNO,
+ cmd->device->id, cmd->device->lun);
+ cmd->device->borken = 1;
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
+ ICR_ASSERT_ATN);
+ sink = 1;
+ do_abort(instance);
+ cmd->result = DID_ERROR << 16;
+ cmd->done(cmd);
+ /* XXX - need to source or sink data here, as appropriate */
+ } else {
#ifdef REAL_DMA
- /* ++roman: When using real DMA,
- * information_transfer() should return after
- * starting DMA since it has nothing more to
- * do.
- */
- return;
-#else
- cmd->SCp.this_residual -= transfersize - len;
+ /* ++roman: When using real DMA,
+ * information_transfer() should return after
+ * starting DMA since it has nothing more to
+ * do.
+ */
+ return;
+#else
+ cmd->SCp.this_residual -= transfersize - len;
#endif
- }
- } else
+ }
+ } else
#endif /* defined(REAL_DMA) */
- NCR5380_transfer_pio(instance, &phase,
- (int *) &cmd->SCp.this_residual, (unsigned char **)
- &cmd->SCp.ptr);
- break;
- case PHASE_MSGIN:
- len = 1;
- data = &tmp;
- NCR5380_write(SELECT_ENABLE_REG, 0); /* disable reselects */
- NCR5380_transfer_pio(instance, &phase, &len, &data);
- cmd->SCp.Message = tmp;
-
- switch (tmp) {
- /*
- * Linking lets us reduce the time required to get the
- * next command out to the device, hopefully this will
- * mean we don't waste another revolution due to the delays
- * required by ARBITRATION and another SELECTION.
- *
- * In the current implementation proposal, low level drivers
- * merely have to start the next command, pointed to by
- * next_link, done() is called as with unlinked commands.
- */
+ NCR5380_transfer_pio(instance, &phase,
+ (int *)&cmd->SCp.this_residual,
+ (unsigned char **)&cmd->SCp.ptr);
+ break;
+ case PHASE_MSGIN:
+ len = 1;
+ data = &tmp;
+ NCR5380_write(SELECT_ENABLE_REG, 0); /* disable reselects */
+ NCR5380_transfer_pio(instance, &phase, &len, &data);
+ cmd->SCp.Message = tmp;
+
+ switch (tmp) {
+ /*
+ * Linking lets us reduce the time required to get the
+ * next command out to the device, hopefully this will
+ * mean we don't waste another revolution due to the delays
+ * required by ARBITRATION and another SELECTION.
+ *
+ * In the current implementation proposal, low level drivers
+ * merely have to start the next command, pointed to by
+ * next_link, done() is called as with unlinked commands.
+ */
#ifdef LINKED
- case LINKED_CMD_COMPLETE:
- case LINKED_FLG_CMD_COMPLETE:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- LNK_PRINTK("scsi%d: target %d lun %d linked command "
- "complete.\n", HOSTNO, cmd->device->id, cmd->device->lun);
-
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /*
- * Sanity check : A linked command should only terminate
- * with one of these messages if there are more linked
- * commands available.
- */
-
- if (!cmd->next_link) {
- printk(KERN_NOTICE "scsi%d: target %d lun %d "
- "linked command complete, no next_link\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
- sink = 1;
- do_abort (instance);
- return;
- }
-
- initialize_SCp(cmd->next_link);
- /* The next command is still part of this process; copy it
- * and don't free it! */
- cmd->next_link->tag = cmd->tag;
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- LNK_PRINTK("scsi%d: target %d lun %d linked request "
- "done, calling scsi_done().\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
+ case LINKED_CMD_COMPLETE:
+ case LINKED_FLG_CMD_COMPLETE:
+ /* Accept message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+
+ LNK_PRINTK("scsi%d: target %d lun %d linked command "
+ "complete.\n", HOSTNO, cmd->device->id, cmd->device->lun);
+
+ /* Enable reselect interrupts */
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ /*
+ * Sanity check : A linked command should only terminate
+ * with one of these messages if there are more linked
+ * commands available.
+ */
+
+ if (!cmd->next_link) {
+ printk(KERN_NOTICE "scsi%d: target %d lun %d "
+ "linked command complete, no next_link\n",
+ HOSTNO, cmd->device->id, cmd->device->lun);
+ sink = 1;
+ do_abort(instance);
+ return;
+ }
+
+ initialize_SCp(cmd->next_link);
+ /* The next command is still part of this process; copy it
+ * and don't free it! */
+ cmd->next_link->tag = cmd->tag;
+ cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
+ LNK_PRINTK("scsi%d: target %d lun %d linked request "
+ "done, calling scsi_done().\n",
+ HOSTNO, cmd->device->id, cmd->device->lun);
#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
+ collect_stats(hostdata, cmd);
#endif
- cmd->scsi_done(cmd);
- cmd = hostdata->connected;
- break;
+ cmd->scsi_done(cmd);
+ cmd = hostdata->connected;
+ break;
#endif /* def LINKED */
- case ABORT:
- case COMMAND_COMPLETE:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- /* ++guenther: possible race with Falcon locking */
- falcon_dont_release++;
- hostdata->connected = NULL;
- QU_PRINTK("scsi%d: command for target %d, lun %d "
- "completed\n", HOSTNO, cmd->device->id, cmd->device->lun);
+ case ABORT:
+ case COMMAND_COMPLETE:
+ /* Accept message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ /* ++guenther: possible race with Falcon locking */
+ falcon_dont_release++;
+ hostdata->connected = NULL;
+ QU_PRINTK("scsi%d: command for target %d, lun %d "
+ "completed\n", HOSTNO, cmd->device->id, cmd->device->lun);
#ifdef SUPPORT_TAGS
- cmd_free_tag( cmd );
- if (status_byte(cmd->SCp.Status) == QUEUE_FULL) {
- /* Turn a QUEUE FULL status into BUSY, I think the
- * mid level cannot handle QUEUE FULL :-( (The
- * command is retried after BUSY). Also update our
- * queue size to the number of currently issued
- * commands now.
- */
- /* ++Andreas: the mid level code knows about
- QUEUE_FULL now. */
- TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
- TAG_PRINTK("scsi%d: target %d lun %d returned "
- "QUEUE_FULL after %d commands\n",
- HOSTNO, cmd->device->id, cmd->device->lun,
- ta->nr_allocated);
- if (ta->queue_size > ta->nr_allocated)
- ta->nr_allocated = ta->queue_size;
- }
+ cmd_free_tag(cmd);
+ if (status_byte(cmd->SCp.Status) == QUEUE_FULL) {
+ /* Turn a QUEUE FULL status into BUSY, I think the
+ * mid level cannot handle QUEUE FULL :-( (The
+ * command is retried after BUSY). Also update our
+ * queue size to the number of currently issued
+ * commands now.
+ */
+ /* ++Andreas: the mid level code knows about
+ QUEUE_FULL now. */
+ TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
+ TAG_PRINTK("scsi%d: target %d lun %d returned "
+ "QUEUE_FULL after %d commands\n",
+ HOSTNO, cmd->device->id, cmd->device->lun,
+ ta->nr_allocated);
+ if (ta->queue_size > ta->nr_allocated)
+ ta->nr_allocated = ta->queue_size;
+ }
#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-
- /*
- * I'm not sure what the correct thing to do here is :
- *
- * If the command that just executed is NOT a request
- * sense, the obvious thing to do is to set the result
- * code to the values of the stored parameters.
- *
- * If it was a REQUEST SENSE command, we need some way to
- * differentiate between the failure code of the original
- * and the failure code of the REQUEST sense - the obvious
- * case is success, where we fall through and leave the
- * result code unchanged.
- *
- * The non-obvious place is where the REQUEST SENSE failed
- */
-
- if (cmd->cmnd[0] != REQUEST_SENSE)
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- else if (status_byte(cmd->SCp.Status) != GOOD)
- cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16);
-
-#ifdef AUTOSENSE
- if ((cmd->cmnd[0] != REQUEST_SENSE) &&
- (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
- ASEN_PRINTK("scsi%d: performing request sense\n",
- HOSTNO);
- cmd->cmnd[0] = REQUEST_SENSE;
- cmd->cmnd[1] &= 0xe0;
- cmd->cmnd[2] = 0;
- cmd->cmnd[3] = 0;
- cmd->cmnd[4] = sizeof(cmd->sense_buffer);
- cmd->cmnd[5] = 0;
- cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]);
-
- cmd->use_sg = 0;
- /* this is initialized from initialize_SCp
- cmd->SCp.buffer = NULL;
- cmd->SCp.buffers_residual = 0;
- */
- cmd->request_buffer = (char *) cmd->sense_buffer;
- cmd->request_bufflen = sizeof(cmd->sense_buffer);
+ /* Enable reselect interrupts */
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+
+ /*
+ * I'm not sure what the correct thing to do here is :
+ *
+ * If the command that just executed is NOT a request
+ * sense, the obvious thing to do is to set the result
+ * code to the values of the stored parameters.
+ *
+ * If it was a REQUEST SENSE command, we need some way to
+ * differentiate between the failure code of the original
+ * and the failure code of the REQUEST sense - the obvious
+ * case is success, where we fall through and leave the
+ * result code unchanged.
+ *
+ * The non-obvious place is where the REQUEST SENSE failed
+ */
+
+ if (cmd->cmnd[0] != REQUEST_SENSE)
+ cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
+ else if (status_byte(cmd->SCp.Status) != GOOD)
+ cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16);
- local_irq_save(flags);
- LIST(cmd,hostdata->issue_queue);
- NEXT(cmd) = hostdata->issue_queue;
- hostdata->issue_queue = (Scsi_Cmnd *) cmd;
- local_irq_restore(flags);
- QU_PRINTK("scsi%d: REQUEST SENSE added to head of "
- "issue queue\n", H_NO(cmd));
- } else
+#ifdef AUTOSENSE
+ if ((cmd->cmnd[0] != REQUEST_SENSE) &&
+ (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
+ ASEN_PRINTK("scsi%d: performing request sense\n", HOSTNO);
+ cmd->cmnd[0] = REQUEST_SENSE;
+ cmd->cmnd[1] &= 0xe0;
+ cmd->cmnd[2] = 0;
+ cmd->cmnd[3] = 0;
+ cmd->cmnd[4] = sizeof(cmd->sense_buffer);
+ cmd->cmnd[5] = 0;
+ cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]);
+
+ cmd->use_sg = 0;
+ /* this is initialized from initialize_SCp
+ cmd->SCp.buffer = NULL;
+ cmd->SCp.buffers_residual = 0;
+ */
+ cmd->request_buffer = (char *) cmd->sense_buffer;
+ cmd->request_bufflen = sizeof(cmd->sense_buffer);
+
+ local_irq_save(flags);
+ LIST(cmd,hostdata->issue_queue);
+ NEXT(cmd) = hostdata->issue_queue;
+ hostdata->issue_queue = (Scsi_Cmnd *) cmd;
+ local_irq_restore(flags);
+ QU_PRINTK("scsi%d: REQUEST SENSE added to head of "
+ "issue queue\n", H_NO(cmd));
+ } else
#endif /* def AUTOSENSE */
- {
+ {
#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
+ collect_stats(hostdata, cmd);
#endif
- cmd->scsi_done(cmd);
- }
-
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /*
- * Restore phase bits to 0 so an interrupted selection,
- * arbitration can resume.
- */
- NCR5380_write(TARGET_COMMAND_REG, 0);
-
- while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
- barrier();
-
- falcon_dont_release--;
- /* ++roman: For Falcon SCSI, release the lock on the
- * ST-DMA here if no other commands are waiting on the
- * disconnected queue.
- */
- falcon_release_lock_if_possible( hostdata );
- return;
- case MESSAGE_REJECT:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- switch (hostdata->last_message) {
- case HEAD_OF_QUEUE_TAG:
- case ORDERED_QUEUE_TAG:
- case SIMPLE_QUEUE_TAG:
- /* The target obviously doesn't support tagged
- * queuing, even though it announced this ability in
- * its INQUIRY data ?!? (maybe only this LUN?) Ok,
- * clear 'tagged_supported' and lock the LUN, since
- * the command is treated as untagged further on.
- */
- cmd->device->tagged_supported = 0;
- hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
- cmd->tag = TAG_NONE;
- TAG_PRINTK("scsi%d: target %d lun %d rejected "
- "QUEUE_TAG message; tagged queuing "
- "disabled\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
- break;
- }
- break;
- case DISCONNECT:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- local_irq_save(flags);
- cmd->device->disconnect = 1;
- LIST(cmd,hostdata->disconnected_queue);
- NEXT(cmd) = hostdata->disconnected_queue;
- hostdata->connected = NULL;
- hostdata->disconnected_queue = cmd;
- local_irq_restore(flags);
- QU_PRINTK("scsi%d: command for target %d lun %d was "
- "moved from connected to the "
- "disconnected_queue\n", HOSTNO,
- cmd->device->id, cmd->device->lun);
- /*
- * Restore phase bits to 0 so an interrupted selection,
- * arbitration can resume.
- */
- NCR5380_write(TARGET_COMMAND_REG, 0);
-
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /* Wait for bus free to avoid nasty timeouts */
- while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
- barrier();
- return;
- /*
- * The SCSI data pointer is *IMPLICITLY* saved on a disconnect
- * operation, in violation of the SCSI spec so we can safely
- * ignore SAVE/RESTORE pointers calls.
- *
- * Unfortunately, some disks violate the SCSI spec and
- * don't issue the required SAVE_POINTERS message before
- * disconnecting, and we have to break spec to remain
- * compatible.
- */
- case SAVE_POINTERS:
- case RESTORE_POINTERS:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- break;
- case EXTENDED_MESSAGE:
-/*
- * Extended messages are sent in the following format :
- * Byte
- * 0 EXTENDED_MESSAGE == 1
- * 1 length (includes one byte for code, doesn't
- * include first two bytes)
- * 2 code
- * 3..length+1 arguments
- *
- * Start the extended message buffer with the EXTENDED_MESSAGE
- * byte, since spi_print_msg() wants the whole thing.
- */
- extended_msg[0] = EXTENDED_MESSAGE;
- /* Accept first byte by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- EXT_PRINTK("scsi%d: receiving extended message\n", HOSTNO);
-
- len = 2;
- data = extended_msg + 1;
- phase = PHASE_MSGIN;
- NCR5380_transfer_pio(instance, &phase, &len, &data);
- EXT_PRINTK("scsi%d: length=%d, code=0x%02x\n", HOSTNO,
- (int)extended_msg[1], (int)extended_msg[2]);
-
- if (!len && extended_msg[1] <=
- (sizeof (extended_msg) - 1)) {
- /* Accept third byte by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- len = extended_msg[1] - 1;
- data = extended_msg + 3;
- phase = PHASE_MSGIN;
-
- NCR5380_transfer_pio(instance, &phase, &len, &data);
- EXT_PRINTK("scsi%d: message received, residual %d\n",
- HOSTNO, len);
-
- switch (extended_msg[2]) {
- case EXTENDED_SDTR:
- case EXTENDED_WDTR:
- case EXTENDED_MODIFY_DATA_POINTER:
- case EXTENDED_EXTENDED_IDENTIFY:
- tmp = 0;
- }
- } else if (len) {
- printk(KERN_NOTICE "scsi%d: error receiving "
- "extended message\n", HOSTNO);
- tmp = 0;
- } else {
- printk(KERN_NOTICE "scsi%d: extended message "
- "code %02x length %d is too long\n",
- HOSTNO, extended_msg[2], extended_msg[1]);
- tmp = 0;
- }
- /* Fall through to reject message */
-
- /*
- * If we get something weird that we aren't expecting,
- * reject it.
- */
- default:
- if (!tmp) {
- printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO);
- spi_print_msg(extended_msg);
- printk("\n");
- } else if (tmp != EXTENDED_MESSAGE)
- printk(KERN_DEBUG "scsi%d: rejecting unknown "
- "message %02x from target %d, lun %d\n",
- HOSTNO, tmp, cmd->device->id, cmd->device->lun);
- else
- printk(KERN_DEBUG "scsi%d: rejecting unknown "
- "extended message "
- "code %02x, length %d from target %d, lun %d\n",
- HOSTNO, extended_msg[1], extended_msg[0],
- cmd->device->id, cmd->device->lun);
-
-
- msgout = MESSAGE_REJECT;
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_ATN);
- break;
- } /* switch (tmp) */
- break;
- case PHASE_MSGOUT:
- len = 1;
- data = &msgout;
- hostdata->last_message = msgout;
- NCR5380_transfer_pio(instance, &phase, &len, &data);
- if (msgout == ABORT) {
+ cmd->scsi_done(cmd);
+ }
+
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ /*
+ * Restore phase bits to 0 so an interrupted selection,
+ * arbitration can resume.
+ */
+ NCR5380_write(TARGET_COMMAND_REG, 0);
+
+ while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
+ barrier();
+
+ falcon_dont_release--;
+ /* ++roman: For Falcon SCSI, release the lock on the
+ * ST-DMA here if no other commands are waiting on the
+ * disconnected queue.
+ */
+ falcon_release_lock_if_possible(hostdata);
+ return;
+ case MESSAGE_REJECT:
+ /* Accept message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ /* Enable reselect interrupts */
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ switch (hostdata->last_message) {
+ case HEAD_OF_QUEUE_TAG:
+ case ORDERED_QUEUE_TAG:
+ case SIMPLE_QUEUE_TAG:
+ /* The target obviously doesn't support tagged
+ * queuing, even though it announced this ability in
+ * its INQUIRY data ?!? (maybe only this LUN?) Ok,
+ * clear 'tagged_supported' and lock the LUN, since
+ * the command is treated as untagged further on.
+ */
+ cmd->device->tagged_supported = 0;
+ hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
+ cmd->tag = TAG_NONE;
+ TAG_PRINTK("scsi%d: target %d lun %d rejected "
+ "QUEUE_TAG message; tagged queuing "
+ "disabled\n",
+ HOSTNO, cmd->device->id, cmd->device->lun);
+ break;
+ }
+ break;
+ case DISCONNECT:
+ /* Accept message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ local_irq_save(flags);
+ cmd->device->disconnect = 1;
+ LIST(cmd,hostdata->disconnected_queue);
+ NEXT(cmd) = hostdata->disconnected_queue;
+ hostdata->connected = NULL;
+ hostdata->disconnected_queue = cmd;
+ local_irq_restore(flags);
+ QU_PRINTK("scsi%d: command for target %d lun %d was "
+ "moved from connected to the "
+ "disconnected_queue\n", HOSTNO,
+ cmd->device->id, cmd->device->lun);
+ /*
+ * Restore phase bits to 0 so an interrupted selection,
+ * arbitration can resume.
+ */
+ NCR5380_write(TARGET_COMMAND_REG, 0);
+
+ /* Enable reselect interrupts */
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ /* Wait for bus free to avoid nasty timeouts */
+ while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
+ barrier();
+ return;
+ /*
+ * The SCSI data pointer is *IMPLICITLY* saved on a disconnect
+ * operation, in violation of the SCSI spec so we can safely
+ * ignore SAVE/RESTORE pointers calls.
+ *
+ * Unfortunately, some disks violate the SCSI spec and
+ * don't issue the required SAVE_POINTERS message before
+ * disconnecting, and we have to break spec to remain
+ * compatible.
+ */
+ case SAVE_POINTERS:
+ case RESTORE_POINTERS:
+ /* Accept message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ /* Enable reselect interrupts */
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ break;
+ case EXTENDED_MESSAGE:
+ /*
+ * Extended messages are sent in the following format :
+ * Byte
+ * 0 EXTENDED_MESSAGE == 1
+ * 1 length (includes one byte for code, doesn't
+ * include first two bytes)
+ * 2 code
+ * 3..length+1 arguments
+ *
+ * Start the extended message buffer with the EXTENDED_MESSAGE
+ * byte, since spi_print_msg() wants the whole thing.
+ */
+ extended_msg[0] = EXTENDED_MESSAGE;
+ /* Accept first byte by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+
+ EXT_PRINTK("scsi%d: receiving extended message\n", HOSTNO);
+
+ len = 2;
+ data = extended_msg + 1;
+ phase = PHASE_MSGIN;
+ NCR5380_transfer_pio(instance, &phase, &len, &data);
+ EXT_PRINTK("scsi%d: length=%d, code=0x%02x\n", HOSTNO,
+ (int)extended_msg[1], (int)extended_msg[2]);
+
+ if (!len && extended_msg[1] <=
+ (sizeof(extended_msg) - 1)) {
+ /* Accept third byte by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ len = extended_msg[1] - 1;
+ data = extended_msg + 3;
+ phase = PHASE_MSGIN;
+
+ NCR5380_transfer_pio(instance, &phase, &len, &data);
+ EXT_PRINTK("scsi%d: message received, residual %d\n",
+ HOSTNO, len);
+
+ switch (extended_msg[2]) {
+ case EXTENDED_SDTR:
+ case EXTENDED_WDTR:
+ case EXTENDED_MODIFY_DATA_POINTER:
+ case EXTENDED_EXTENDED_IDENTIFY:
+ tmp = 0;
+ }
+ } else if (len) {
+ printk(KERN_NOTICE "scsi%d: error receiving "
+ "extended message\n", HOSTNO);
+ tmp = 0;
+ } else {
+ printk(KERN_NOTICE "scsi%d: extended message "
+ "code %02x length %d is too long\n",
+ HOSTNO, extended_msg[2], extended_msg[1]);
+ tmp = 0;
+ }
+ /* Fall through to reject message */
+
+ /*
+ * If we get something weird that we aren't expecting,
+ * reject it.
+ */
+ default:
+ if (!tmp) {
+ printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO);
+ spi_print_msg(extended_msg);
+ printk("\n");
+ } else if (tmp != EXTENDED_MESSAGE)
+ printk(KERN_DEBUG "scsi%d: rejecting unknown "
+ "message %02x from target %d, lun %d\n",
+ HOSTNO, tmp, cmd->device->id, cmd->device->lun);
+ else
+ printk(KERN_DEBUG "scsi%d: rejecting unknown "
+ "extended message "
+ "code %02x, length %d from target %d, lun %d\n",
+ HOSTNO, extended_msg[1], extended_msg[0],
+ cmd->device->id, cmd->device->lun);
+
+
+ msgout = MESSAGE_REJECT;
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
+ break;
+ } /* switch (tmp) */
+ break;
+ case PHASE_MSGOUT:
+ len = 1;
+ data = &msgout;
+ hostdata->last_message = msgout;
+ NCR5380_transfer_pio(instance, &phase, &len, &data);
+ if (msgout == ABORT) {
#ifdef SUPPORT_TAGS
- cmd_free_tag( cmd );
+ cmd_free_tag(cmd);
#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
- hostdata->connected = NULL;
- cmd->result = DID_ERROR << 16;
+ hostdata->connected = NULL;
+ cmd->result = DID_ERROR << 16;
#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
+ collect_stats(hostdata, cmd);
#endif
- cmd->scsi_done(cmd);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- falcon_release_lock_if_possible( hostdata );
- return;
- }
- msgout = NOP;
- break;
- case PHASE_CMDOUT:
- len = cmd->cmd_len;
- data = cmd->cmnd;
- /*
- * XXX for performance reasons, on machines with a
- * PSEUDO-DMA architecture we should probably
- * use the dma transfer function.
- */
- NCR5380_transfer_pio(instance, &phase, &len,
- &data);
- break;
- case PHASE_STATIN:
- len = 1;
- data = &tmp;
- NCR5380_transfer_pio(instance, &phase, &len, &data);
- cmd->SCp.Status = tmp;
- break;
- default:
- printk("scsi%d: unknown phase\n", HOSTNO);
- NCR_PRINT(NDEBUG_ANY);
- } /* switch(phase) */
- } /* if (tmp * SR_REQ) */
- } /* while (1) */
+ cmd->scsi_done(cmd);
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ falcon_release_lock_if_possible(hostdata);
+ return;
+ }
+ msgout = NOP;
+ break;
+ case PHASE_CMDOUT:
+ len = cmd->cmd_len;
+ data = cmd->cmnd;
+ /*
+ * XXX for performance reasons, on machines with a
+ * PSEUDO-DMA architecture we should probably
+ * use the dma transfer function.
+ */
+ NCR5380_transfer_pio(instance, &phase, &len, &data);
+ break;
+ case PHASE_STATIN:
+ len = 1;
+ data = &tmp;
+ NCR5380_transfer_pio(instance, &phase, &len, &data);
+ cmd->SCp.Status = tmp;
+ break;
+ default:
+ printk("scsi%d: unknown phase\n", HOSTNO);
+ NCR_PRINT(NDEBUG_ANY);
+ } /* switch(phase) */
+ } /* if (tmp * SR_REQ) */
+ } /* while (1) */
}
/*
* Function : void NCR5380_reselect (struct Scsi_Host *instance)
*
- * Purpose : does reselection, initializing the instance->connected
- * field to point to the Scsi_Cmnd for which the I_T_L or I_T_L_Q
+ * Purpose : does reselection, initializing the instance->connected
+ * field to point to the Scsi_Cmnd for which the I_T_L or I_T_L_Q
* nexus has been reestablished,
- *
+ *
* Inputs : instance - this instance of the NCR5380.
*
*/
-static void NCR5380_reselect (struct Scsi_Host *instance)
+static void NCR5380_reselect(struct Scsi_Host *instance)
{
- SETUP_HOSTDATA(instance);
- unsigned char target_mask;
- unsigned char lun, phase;
- int len;
+ SETUP_HOSTDATA(instance);
+ unsigned char target_mask;
+ unsigned char lun, phase;
+ int len;
#ifdef SUPPORT_TAGS
- unsigned char tag;
+ unsigned char tag;
#endif
- unsigned char msg[3];
- unsigned char *data;
- Scsi_Cmnd *tmp = NULL, *prev;
-/* unsigned long flags; */
-
- /*
- * Disable arbitration, etc. since the host adapter obviously
- * lost, and tell an interrupted NCR5380_select() to restart.
- */
-
- NCR5380_write(MODE_REG, MR_BASE);
- hostdata->restart_select = 1;
-
- target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
-
- RSL_PRINTK("scsi%d: reselect\n", HOSTNO);
-
- /*
- * At this point, we have detected that our SCSI ID is on the bus,
- * SEL is true and BSY was false for at least one bus settle delay
- * (400 ns).
- *
- * We must assert BSY ourselves, until the target drops the SEL
- * signal.
- */
-
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
-
- while (NCR5380_read(STATUS_REG) & SR_SEL);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- /*
- * Wait for target to go into MSGIN.
- */
-
- while (!(NCR5380_read(STATUS_REG) & SR_REQ));
-
- len = 1;
- data = msg;
- phase = PHASE_MSGIN;
- NCR5380_transfer_pio(instance, &phase, &len, &data);
-
- if (!(msg[0] & 0x80)) {
- printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO);
- spi_print_msg(msg);
- do_abort(instance);
- return;
- }
- lun = (msg[0] & 0x07);
+ unsigned char msg[3];
+ unsigned char *data;
+ Scsi_Cmnd *tmp = NULL, *prev;
+/* unsigned long flags; */
+
+ /*
+ * Disable arbitration, etc. since the host adapter obviously
+ * lost, and tell an interrupted NCR5380_select() to restart.
+ */
+
+ NCR5380_write(MODE_REG, MR_BASE);
+ hostdata->restart_select = 1;
+
+ target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
+
+ RSL_PRINTK("scsi%d: reselect\n", HOSTNO);
+
+ /*
+ * At this point, we have detected that our SCSI ID is on the bus,
+ * SEL is true and BSY was false for at least one bus settle delay
+ * (400 ns).
+ *
+ * We must assert BSY ourselves, until the target drops the SEL
+ * signal.
+ */
+
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
+
+ while (NCR5380_read(STATUS_REG) & SR_SEL)
+ ;
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+
+ /*
+ * Wait for target to go into MSGIN.
+ */
+
+ while (!(NCR5380_read(STATUS_REG) & SR_REQ))
+ ;
+
+ len = 1;
+ data = msg;
+ phase = PHASE_MSGIN;
+ NCR5380_transfer_pio(instance, &phase, &len, &data);
+
+ if (!(msg[0] & 0x80)) {
+ printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO);
+ spi_print_msg(msg);
+ do_abort(instance);
+ return;
+ }
+ lun = (msg[0] & 0x07);
#ifdef SUPPORT_TAGS
- /* If the phase is still MSGIN, the target wants to send some more
- * messages. In case it supports tagged queuing, this is probably a
- * SIMPLE_QUEUE_TAG for the I_T_L_Q nexus.
- */
- tag = TAG_NONE;
- if (phase == PHASE_MSGIN && setup_use_tagged_queuing) {
- /* Accept previous IDENTIFY message by clearing ACK */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
- len = 2;
- data = msg+1;
- if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
- msg[1] == SIMPLE_QUEUE_TAG)
- tag = msg[2];
- TAG_PRINTK("scsi%d: target mask %02x, lun %d sent tag %d at "
- "reselection\n", HOSTNO, target_mask, lun, tag);
- }
+ /* If the phase is still MSGIN, the target wants to send some more
+ * messages. In case it supports tagged queuing, this is probably a
+ * SIMPLE_QUEUE_TAG for the I_T_L_Q nexus.
+ */
+ tag = TAG_NONE;
+ if (phase == PHASE_MSGIN && setup_use_tagged_queuing) {
+ /* Accept previous IDENTIFY message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ len = 2;
+ data = msg + 1;
+ if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
+ msg[1] == SIMPLE_QUEUE_TAG)
+ tag = msg[2];
+ TAG_PRINTK("scsi%d: target mask %02x, lun %d sent tag %d at "
+ "reselection\n", HOSTNO, target_mask, lun, tag);
+ }
#endif
-
- /*
- * Find the command corresponding to the I_T_L or I_T_L_Q nexus we
- * just reestablished, and remove it from the disconnected queue.
- */
-
- for (tmp = (Scsi_Cmnd *) hostdata->disconnected_queue, prev = NULL;
- tmp; prev = tmp, tmp = NEXT(tmp) ) {
- if ((target_mask == (1 << tmp->device->id)) && (lun == tmp->device->lun)
+
+ /*
+ * Find the command corresponding to the I_T_L or I_T_L_Q nexus we
+ * just reestablished, and remove it from the disconnected queue.
+ */
+
+ for (tmp = (Scsi_Cmnd *) hostdata->disconnected_queue, prev = NULL;
+ tmp; prev = tmp, tmp = NEXT(tmp)) {
+ if ((target_mask == (1 << tmp->device->id)) && (lun == tmp->device->lun)
#ifdef SUPPORT_TAGS
- && (tag == tmp->tag)
+ && (tag == tmp->tag)
#endif
- ) {
- /* ++guenther: prevent race with falcon_release_lock */
- falcon_dont_release++;
- if (prev) {
- REMOVE(prev, NEXT(prev), tmp, NEXT(tmp));
- NEXT(prev) = NEXT(tmp);
- } else {
- REMOVE(-1, hostdata->disconnected_queue, tmp, NEXT(tmp));
- hostdata->disconnected_queue = NEXT(tmp);
- }
- NEXT(tmp) = NULL;
- break;
+ ) {
+ /* ++guenther: prevent race with falcon_release_lock */
+ falcon_dont_release++;
+ if (prev) {
+ REMOVE(prev, NEXT(prev), tmp, NEXT(tmp));
+ NEXT(prev) = NEXT(tmp);
+ } else {
+ REMOVE(-1, hostdata->disconnected_queue, tmp, NEXT(tmp));
+ hostdata->disconnected_queue = NEXT(tmp);
+ }
+ NEXT(tmp) = NULL;
+ break;
+ }
}
- }
-
- if (!tmp) {
- printk(KERN_WARNING "scsi%d: warning: target bitmask %02x lun %d "
+
+ if (!tmp) {
+ printk(KERN_WARNING "scsi%d: warning: target bitmask %02x lun %d "
#ifdef SUPPORT_TAGS
- "tag %d "
+ "tag %d "
#endif
- "not in disconnected_queue.\n",
- HOSTNO, target_mask, lun
+ "not in disconnected_queue.\n",
+ HOSTNO, target_mask, lun
#ifdef SUPPORT_TAGS
- , tag
+ , tag
#endif
- );
- /*
- * Since we have an established nexus that we can't do anything
- * with, we must abort it.
- */
- do_abort(instance);
- return;
- }
+ );
+ /*
+ * Since we have an established nexus that we can't do anything
+ * with, we must abort it.
+ */
+ do_abort(instance);
+ return;
+ }
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ /* Accept message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- hostdata->connected = tmp;
- RSL_PRINTK("scsi%d: nexus established, target = %d, lun = %d, tag = %d\n",
- HOSTNO, tmp->device->id, tmp->device->lun, tmp->tag);
- falcon_dont_release--;
+ hostdata->connected = tmp;
+ RSL_PRINTK("scsi%d: nexus established, target = %d, lun = %d, tag = %d\n",
+ HOSTNO, tmp->device->id, tmp->device->lun, tmp->tag);
+ falcon_dont_release--;
}
@@ -2666,362 +2676,361 @@ static void NCR5380_reselect (struct Scsi_Host *instance)
*
* Purpose : abort a command
*
- * Inputs : cmd - the Scsi_Cmnd to abort, code - code to set the
- * host byte of the result field to, if zero DID_ABORTED is
+ * Inputs : cmd - the Scsi_Cmnd to abort, code - code to set the
+ * host byte of the result field to, if zero DID_ABORTED is
* used.
*
* Returns : 0 - success, -1 on failure.
*
- * XXX - there is no way to abort the command that is currently
- * connected, you have to wait for it to complete. If this is
+ * XXX - there is no way to abort the command that is currently
+ * connected, you have to wait for it to complete. If this is
* a problem, we could implement longjmp() / setjmp(), setjmp()
- * called where the loop started in NCR5380_main().
+ * called where the loop started in NCR5380_main().
*/
static
-int NCR5380_abort (Scsi_Cmnd *cmd)
+int NCR5380_abort(Scsi_Cmnd *cmd)
{
- struct Scsi_Host *instance = cmd->device->host;
- SETUP_HOSTDATA(instance);
- Scsi_Cmnd *tmp, **prev;
- unsigned long flags;
+ struct Scsi_Host *instance = cmd->device->host;
+ SETUP_HOSTDATA(instance);
+ Scsi_Cmnd *tmp, **prev;
+ unsigned long flags;
- printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
- scsi_print_command(cmd);
+ printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
+ scsi_print_command(cmd);
- NCR5380_print_status (instance);
+ NCR5380_print_status(instance);
+
+ local_irq_save(flags);
- local_irq_save(flags);
-
- if (!IS_A_TT() && !falcon_got_lock)
- printk(KERN_ERR "scsi%d: !!BINGO!! Falcon has no lock in NCR5380_abort\n",
- HOSTNO);
+ if (!IS_A_TT() && !falcon_got_lock)
+ printk(KERN_ERR "scsi%d: !!BINGO!! Falcon has no lock in NCR5380_abort\n",
+ HOSTNO);
- ABRT_PRINTK("scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
- NCR5380_read(BUS_AND_STATUS_REG),
- NCR5380_read(STATUS_REG));
+ ABRT_PRINTK("scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
+ NCR5380_read(BUS_AND_STATUS_REG),
+ NCR5380_read(STATUS_REG));
#if 1
-/*
- * Case 1 : If the command is the currently executing command,
- * we'll set the aborted flag and return control so that
- * information transfer routine can exit cleanly.
- */
+ /*
+ * Case 1 : If the command is the currently executing command,
+ * we'll set the aborted flag and return control so that
+ * information transfer routine can exit cleanly.
+ */
- if (hostdata->connected == cmd) {
+ if (hostdata->connected == cmd) {
- ABRT_PRINTK("scsi%d: aborting connected command\n", HOSTNO);
-/*
- * We should perform BSY checking, and make sure we haven't slipped
- * into BUS FREE.
- */
+ ABRT_PRINTK("scsi%d: aborting connected command\n", HOSTNO);
+ /*
+ * We should perform BSY checking, and make sure we haven't slipped
+ * into BUS FREE.
+ */
-/* NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_ATN); */
-/*
- * Since we can't change phases until we've completed the current
- * handshake, we have to source or sink a byte of data if the current
- * phase is not MSGOUT.
- */
+ /* NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_ATN); */
+ /*
+ * Since we can't change phases until we've completed the current
+ * handshake, we have to source or sink a byte of data if the current
+ * phase is not MSGOUT.
+ */
-/*
- * Return control to the executing NCR drive so we can clear the
- * aborted flag and get back into our main loop.
- */
+ /*
+ * Return control to the executing NCR drive so we can clear the
+ * aborted flag and get back into our main loop.
+ */
- if (do_abort(instance) == 0) {
- hostdata->aborted = 1;
- hostdata->connected = NULL;
- cmd->result = DID_ABORT << 16;
+ if (do_abort(instance) == 0) {
+ hostdata->aborted = 1;
+ hostdata->connected = NULL;
+ cmd->result = DID_ABORT << 16;
#ifdef SUPPORT_TAGS
- cmd_free_tag( cmd );
+ cmd_free_tag(cmd);
#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
- local_irq_restore(flags);
- cmd->scsi_done(cmd);
- falcon_release_lock_if_possible( hostdata );
- return SCSI_ABORT_SUCCESS;
- } else {
-/* local_irq_restore(flags); */
- printk("scsi%d: abort of connected command failed!\n", HOSTNO);
- return SCSI_ABORT_ERROR;
- }
- }
+ local_irq_restore(flags);
+ cmd->scsi_done(cmd);
+ falcon_release_lock_if_possible(hostdata);
+ return SCSI_ABORT_SUCCESS;
+ } else {
+/* local_irq_restore(flags); */
+ printk("scsi%d: abort of connected command failed!\n", HOSTNO);
+ return SCSI_ABORT_ERROR;
+ }
+ }
#endif
-/*
- * Case 2 : If the command hasn't been issued yet, we simply remove it
- * from the issue queue.
- */
- for (prev = (Scsi_Cmnd **) &(hostdata->issue_queue),
- tmp = (Scsi_Cmnd *) hostdata->issue_queue;
- tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp) )
- if (cmd == tmp) {
- REMOVE(5, *prev, tmp, NEXT(tmp));
- (*prev) = NEXT(tmp);
- NEXT(tmp) = NULL;
- tmp->result = DID_ABORT << 16;
- local_irq_restore(flags);
- ABRT_PRINTK("scsi%d: abort removed command from issue queue.\n",
- HOSTNO);
- /* Tagged queuing note: no tag to free here, hasn't been assigned
- * yet... */
- tmp->scsi_done(tmp);
- falcon_release_lock_if_possible( hostdata );
- return SCSI_ABORT_SUCCESS;
+ /*
+ * Case 2 : If the command hasn't been issued yet, we simply remove it
+ * from the issue queue.
+ */
+ for (prev = (Scsi_Cmnd **)&(hostdata->issue_queue),
+ tmp = (Scsi_Cmnd *)hostdata->issue_queue;
+ tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
+ if (cmd == tmp) {
+ REMOVE(5, *prev, tmp, NEXT(tmp));
+ (*prev) = NEXT(tmp);
+ NEXT(tmp) = NULL;
+ tmp->result = DID_ABORT << 16;
+ local_irq_restore(flags);
+ ABRT_PRINTK("scsi%d: abort removed command from issue queue.\n",
+ HOSTNO);
+ /* Tagged queuing note: no tag to free here, hasn't been assigned
+ * yet... */
+ tmp->scsi_done(tmp);
+ falcon_release_lock_if_possible(hostdata);
+ return SCSI_ABORT_SUCCESS;
+ }
}
-/*
- * Case 3 : If any commands are connected, we're going to fail the abort
- * and let the high level SCSI driver retry at a later time or
- * issue a reset.
- *
- * Timeouts, and therefore aborted commands, will be highly unlikely
- * and handling them cleanly in this situation would make the common
- * case of noresets less efficient, and would pollute our code. So,
- * we fail.
- */
+ /*
+ * Case 3 : If any commands are connected, we're going to fail the abort
+ * and let the high level SCSI driver retry at a later time or
+ * issue a reset.
+ *
+ * Timeouts, and therefore aborted commands, will be highly unlikely
+ * and handling them cleanly in this situation would make the common
+ * case of noresets less efficient, and would pollute our code. So,
+ * we fail.
+ */
- if (hostdata->connected) {
- local_irq_restore(flags);
- ABRT_PRINTK("scsi%d: abort failed, command connected.\n", HOSTNO);
- return SCSI_ABORT_SNOOZE;
- }
+ if (hostdata->connected) {
+ local_irq_restore(flags);
+ ABRT_PRINTK("scsi%d: abort failed, command connected.\n", HOSTNO);
+ return SCSI_ABORT_SNOOZE;
+ }
-/*
- * Case 4: If the command is currently disconnected from the bus, and
- * there are no connected commands, we reconnect the I_T_L or
- * I_T_L_Q nexus associated with it, go into message out, and send
- * an abort message.
- *
- * This case is especially ugly. In order to reestablish the nexus, we
- * need to call NCR5380_select(). The easiest way to implement this
- * function was to abort if the bus was busy, and let the interrupt
- * handler triggered on the SEL for reselect take care of lost arbitrations
- * where necessary, meaning interrupts need to be enabled.
- *
- * When interrupts are enabled, the queues may change - so we
- * can't remove it from the disconnected queue before selecting it
- * because that could cause a failure in hashing the nexus if that
- * device reselected.
- *
- * Since the queues may change, we can't use the pointers from when we
- * first locate it.
- *
- * So, we must first locate the command, and if NCR5380_select()
- * succeeds, then issue the abort, relocate the command and remove
- * it from the disconnected queue.
- */
+ /*
+ * Case 4: If the command is currently disconnected from the bus, and
+ * there are no connected commands, we reconnect the I_T_L or
+ * I_T_L_Q nexus associated with it, go into message out, and send
+ * an abort message.
+ *
+ * This case is especially ugly. In order to reestablish the nexus, we
+ * need to call NCR5380_select(). The easiest way to implement this
+ * function was to abort if the bus was busy, and let the interrupt
+ * handler triggered on the SEL for reselect take care of lost arbitrations
+ * where necessary, meaning interrupts need to be enabled.
+ *
+ * When interrupts are enabled, the queues may change - so we
+ * can't remove it from the disconnected queue before selecting it
+ * because that could cause a failure in hashing the nexus if that
+ * device reselected.
+ *
+ * Since the queues may change, we can't use the pointers from when we
+ * first locate it.
+ *
+ * So, we must first locate the command, and if NCR5380_select()
+ * succeeds, then issue the abort, relocate the command and remove
+ * it from the disconnected queue.
+ */
+
+ for (tmp = (Scsi_Cmnd *) hostdata->disconnected_queue; tmp;
+ tmp = NEXT(tmp)) {
+ if (cmd == tmp) {
+ local_irq_restore(flags);
+ ABRT_PRINTK("scsi%d: aborting disconnected command.\n", HOSTNO);
+
+ if (NCR5380_select(instance, cmd, (int)cmd->tag))
+ return SCSI_ABORT_BUSY;
- for (tmp = (Scsi_Cmnd *) hostdata->disconnected_queue; tmp;
- tmp = NEXT(tmp))
- if (cmd == tmp) {
- local_irq_restore(flags);
- ABRT_PRINTK("scsi%d: aborting disconnected command.\n", HOSTNO);
-
- if (NCR5380_select (instance, cmd, (int) cmd->tag))
- return SCSI_ABORT_BUSY;
-
- ABRT_PRINTK("scsi%d: nexus reestablished.\n", HOSTNO);
-
- do_abort (instance);
-
- local_irq_save(flags);
- for (prev = (Scsi_Cmnd **) &(hostdata->disconnected_queue),
- tmp = (Scsi_Cmnd *) hostdata->disconnected_queue;
- tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp) )
- if (cmd == tmp) {
- REMOVE(5, *prev, tmp, NEXT(tmp));
- *prev = NEXT(tmp);
- NEXT(tmp) = NULL;
- tmp->result = DID_ABORT << 16;
- /* We must unlock the tag/LUN immediately here, since the
- * target goes to BUS FREE and doesn't send us another
- * message (COMMAND_COMPLETE or the like)
- */
+ ABRT_PRINTK("scsi%d: nexus reestablished.\n", HOSTNO);
+
+ do_abort(instance);
+
+ local_irq_save(flags);
+ for (prev = (Scsi_Cmnd **)&(hostdata->disconnected_queue),
+ tmp = (Scsi_Cmnd *)hostdata->disconnected_queue;
+ tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
+ if (cmd == tmp) {
+ REMOVE(5, *prev, tmp, NEXT(tmp));
+ *prev = NEXT(tmp);
+ NEXT(tmp) = NULL;
+ tmp->result = DID_ABORT << 16;
+ /* We must unlock the tag/LUN immediately here, since the
+ * target goes to BUS FREE and doesn't send us another
+ * message (COMMAND_COMPLETE or the like)
+ */
#ifdef SUPPORT_TAGS
- cmd_free_tag( tmp );
+ cmd_free_tag(tmp);
#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
- local_irq_restore(flags);
- tmp->scsi_done(tmp);
- falcon_release_lock_if_possible( hostdata );
- return SCSI_ABORT_SUCCESS;
+ local_irq_restore(flags);
+ tmp->scsi_done(tmp);
+ falcon_release_lock_if_possible(hostdata);
+ return SCSI_ABORT_SUCCESS;
+ }
+ }
}
}
-/*
- * Case 5 : If we reached this point, the command was not found in any of
- * the queues.
- *
- * We probably reached this point because of an unlikely race condition
- * between the command completing successfully and the abortion code,
- * so we won't panic, but we will notify the user in case something really
- * broke.
- */
+ /*
+ * Case 5 : If we reached this point, the command was not found in any of
+ * the queues.
+ *
+ * We probably reached this point because of an unlikely race condition
+ * between the command completing successfully and the abortion code,
+ * so we won't panic, but we will notify the user in case something really
+ * broke.
+ */
- local_irq_restore(flags);
- printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n"
- KERN_INFO " before abortion\n", HOSTNO);
+ local_irq_restore(flags);
+ printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n"
+ KERN_INFO " before abortion\n", HOSTNO);
-/* Maybe it is sufficient just to release the ST-DMA lock... (if
- * possible at all) At least, we should check if the lock could be
- * released after the abort, in case it is kept due to some bug.
- */
- falcon_release_lock_if_possible( hostdata );
+ /* Maybe it is sufficient just to release the ST-DMA lock... (if
+ * possible at all) At least, we should check if the lock could be
+ * released after the abort, in case it is kept due to some bug.
+ */
+ falcon_release_lock_if_possible(hostdata);
- return SCSI_ABORT_NOT_RUNNING;
+ return SCSI_ABORT_NOT_RUNNING;
}
-/*
+/*
* Function : int NCR5380_reset (Scsi_Cmnd *cmd)
- *
+ *
* Purpose : reset the SCSI bus.
*
* Returns : SCSI_RESET_WAKEUP
*
- */
+ */
-static int NCR5380_bus_reset( Scsi_Cmnd *cmd)
+static int NCR5380_bus_reset(Scsi_Cmnd *cmd)
{
- SETUP_HOSTDATA(cmd->device->host);
- int i;
- unsigned long flags;
+ SETUP_HOSTDATA(cmd->device->host);
+ int i;
+ unsigned long flags;
#if 1
- Scsi_Cmnd *connected, *disconnected_queue;
+ Scsi_Cmnd *connected, *disconnected_queue;
#endif
- if (!IS_A_TT() && !falcon_got_lock)
- printk(KERN_ERR "scsi%d: !!BINGO!! Falcon has no lock in NCR5380_reset\n",
- H_NO(cmd) );
-
- NCR5380_print_status (cmd->device->host);
-
- /* get in phase */
- NCR5380_write( TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
- /* assert RST */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
- udelay (40);
- /* reset NCR registers */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
- NCR5380_write( MODE_REG, MR_BASE );
- NCR5380_write( TARGET_COMMAND_REG, 0 );
- NCR5380_write( SELECT_ENABLE_REG, 0 );
- /* ++roman: reset interrupt condition! otherwise no interrupts don't get
- * through anymore ... */
- (void)NCR5380_read( RESET_PARITY_INTERRUPT_REG );
-
-#if 1 /* XXX Should now be done by midlevel code, but it's broken XXX */
- /* XXX see below XXX */
-
- /* MSch: old-style reset: actually abort all command processing here */
-
- /* After the reset, there are no more connected or disconnected commands
- * and no busy units; to avoid problems with re-inserting the commands
- * into the issue_queue (via scsi_done()), the aborted commands are
- * remembered in local variables first.
- */
- local_irq_save(flags);
- connected = (Scsi_Cmnd *)hostdata->connected;
- hostdata->connected = NULL;
- disconnected_queue = (Scsi_Cmnd *)hostdata->disconnected_queue;
- hostdata->disconnected_queue = NULL;
+ if (!IS_A_TT() && !falcon_got_lock)
+ printk(KERN_ERR "scsi%d: !!BINGO!! Falcon has no lock in NCR5380_reset\n",
+ H_NO(cmd));
+
+ NCR5380_print_status(cmd->device->host);
+
+ /* get in phase */
+ NCR5380_write(TARGET_COMMAND_REG,
+ PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG)));
+ /* assert RST */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
+ udelay(40);
+ /* reset NCR registers */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_write(TARGET_COMMAND_REG, 0);
+ NCR5380_write(SELECT_ENABLE_REG, 0);
+ /* ++roman: reset interrupt condition! otherwise no interrupts don't get
+ * through anymore ... */
+ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+#if 1 /* XXX Should now be done by midlevel code, but it's broken XXX */
+ /* XXX see below XXX */
+
+ /* MSch: old-style reset: actually abort all command processing here */
+
+ /* After the reset, there are no more connected or disconnected commands
+ * and no busy units; to avoid problems with re-inserting the commands
+ * into the issue_queue (via scsi_done()), the aborted commands are
+ * remembered in local variables first.
+ */
+ local_irq_save(flags);
+ connected = (Scsi_Cmnd *)hostdata->connected;
+ hostdata->connected = NULL;
+ disconnected_queue = (Scsi_Cmnd *)hostdata->disconnected_queue;
+ hostdata->disconnected_queue = NULL;
#ifdef SUPPORT_TAGS
- free_all_tags();
+ free_all_tags();
#endif
- for( i = 0; i < 8; ++i )
- hostdata->busy[i] = 0;
+ for (i = 0; i < 8; ++i)
+ hostdata->busy[i] = 0;
#ifdef REAL_DMA
- hostdata->dma_len = 0;
+ hostdata->dma_len = 0;
#endif
- local_irq_restore(flags);
+ local_irq_restore(flags);
- /* In order to tell the mid-level code which commands were aborted,
- * set the command status to DID_RESET and call scsi_done() !!!
- * This ultimately aborts processing of these commands in the mid-level.
- */
+ /* In order to tell the mid-level code which commands were aborted,
+ * set the command status to DID_RESET and call scsi_done() !!!
+ * This ultimately aborts processing of these commands in the mid-level.
+ */
- if ((cmd = connected)) {
- ABRT_PRINTK("scsi%d: reset aborted a connected command\n", H_NO(cmd));
- cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16);
- cmd->scsi_done( cmd );
- }
+ if ((cmd = connected)) {
+ ABRT_PRINTK("scsi%d: reset aborted a connected command\n", H_NO(cmd));
+ cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16);
+ cmd->scsi_done(cmd);
+ }
- for (i = 0; (cmd = disconnected_queue); ++i) {
- disconnected_queue = NEXT(cmd);
- NEXT(cmd) = NULL;
- cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16);
- cmd->scsi_done( cmd );
- }
- if (i > 0)
- ABRT_PRINTK("scsi: reset aborted %d disconnected command(s)\n", i);
+ for (i = 0; (cmd = disconnected_queue); ++i) {
+ disconnected_queue = NEXT(cmd);
+ NEXT(cmd) = NULL;
+ cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16);
+ cmd->scsi_done(cmd);
+ }
+ if (i > 0)
+ ABRT_PRINTK("scsi: reset aborted %d disconnected command(s)\n", i);
-/* The Falcon lock should be released after a reset...
- */
-/* ++guenther: moved to atari_scsi_reset(), to prevent a race between
- * unlocking and enabling dma interrupt.
- */
-/* falcon_release_lock_if_possible( hostdata );*/
+ /* The Falcon lock should be released after a reset...
+ */
+ /* ++guenther: moved to atari_scsi_reset(), to prevent a race between
+ * unlocking and enabling dma interrupt.
+ */
+/* falcon_release_lock_if_possible( hostdata );*/
- /* since all commands have been explicitly terminated, we need to tell
- * the midlevel code that the reset was SUCCESSFUL, and there is no
- * need to 'wake up' the commands by a request_sense
- */
- return SCSI_RESET_SUCCESS | SCSI_RESET_BUS_RESET;
+ /* since all commands have been explicitly terminated, we need to tell
+ * the midlevel code that the reset was SUCCESSFUL, and there is no
+ * need to 'wake up' the commands by a request_sense
+ */
+ return SCSI_RESET_SUCCESS | SCSI_RESET_BUS_RESET;
#else /* 1 */
- /* MSch: new-style reset handling: let the mid-level do what it can */
-
- /* ++guenther: MID-LEVEL IS STILL BROKEN.
- * Mid-level is supposed to requeue all commands that were active on the
- * various low-level queues. In fact it does this, but that's not enough
- * because all these commands are subject to timeout. And if a timeout
- * happens for any removed command, *_abort() is called but all queues
- * are now empty. Abort then gives up the falcon lock, which is fatal,
- * since the mid-level will queue more commands and must have the lock
- * (it's all happening inside timer interrupt handler!!).
- * Even worse, abort will return NOT_RUNNING for all those commands not
- * on any queue, so they won't be retried ...
- *
- * Conclusion: either scsi.c disables timeout for all resetted commands
- * immediately, or we lose! As of linux-2.0.20 it doesn't.
- */
-
- /* After the reset, there are no more connected or disconnected commands
- * and no busy units; so clear the low-level status here to avoid
- * conflicts when the mid-level code tries to wake up the affected
- * commands!
- */
-
- if (hostdata->issue_queue)
- ABRT_PRINTK("scsi%d: reset aborted issued command(s)\n", H_NO(cmd));
- if (hostdata->connected)
- ABRT_PRINTK("scsi%d: reset aborted a connected command\n", H_NO(cmd));
- if (hostdata->disconnected_queue)
- ABRT_PRINTK("scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd));
-
- local_irq_save(flags);
- hostdata->issue_queue = NULL;
- hostdata->connected = NULL;
- hostdata->disconnected_queue = NULL;
+ /* MSch: new-style reset handling: let the mid-level do what it can */
+
+ /* ++guenther: MID-LEVEL IS STILL BROKEN.
+ * Mid-level is supposed to requeue all commands that were active on the
+ * various low-level queues. In fact it does this, but that's not enough
+ * because all these commands are subject to timeout. And if a timeout
+ * happens for any removed command, *_abort() is called but all queues
+ * are now empty. Abort then gives up the falcon lock, which is fatal,
+ * since the mid-level will queue more commands and must have the lock
+ * (it's all happening inside timer interrupt handler!!).
+ * Even worse, abort will return NOT_RUNNING for all those commands not
+ * on any queue, so they won't be retried ...
+ *
+ * Conclusion: either scsi.c disables timeout for all resetted commands
+ * immediately, or we lose! As of linux-2.0.20 it doesn't.
+ */
+
+ /* After the reset, there are no more connected or disconnected commands
+ * and no busy units; so clear the low-level status here to avoid
+ * conflicts when the mid-level code tries to wake up the affected
+ * commands!
+ */
+
+ if (hostdata->issue_queue)
+ ABRT_PRINTK("scsi%d: reset aborted issued command(s)\n", H_NO(cmd));
+ if (hostdata->connected)
+ ABRT_PRINTK("scsi%d: reset aborted a connected command\n", H_NO(cmd));
+ if (hostdata->disconnected_queue)
+ ABRT_PRINTK("scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd));
+
+ local_irq_save(flags);
+ hostdata->issue_queue = NULL;
+ hostdata->connected = NULL;
+ hostdata->disconnected_queue = NULL;
#ifdef SUPPORT_TAGS
- free_all_tags();
+ free_all_tags();
#endif
- for( i = 0; i < 8; ++i )
- hostdata->busy[i] = 0;
+ for (i = 0; i < 8; ++i)
+ hostdata->busy[i] = 0;
#ifdef REAL_DMA
- hostdata->dma_len = 0;
+ hostdata->dma_len = 0;
#endif
- local_irq_restore(flags);
+ local_irq_restore(flags);
- /* we did no complete reset of all commands, so a wakeup is required */
- return SCSI_RESET_WAKEUP | SCSI_RESET_BUS_RESET;
+ /* we did no complete reset of all commands, so a wakeup is required */
+ return SCSI_RESET_WAKEUP | SCSI_RESET_BUS_RESET;
#endif /* 1 */
}
-
-/* Local Variables: */
-/* tab-width: 8 */
-/* End: */
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index 85b8acc9403..f766d0d81c9 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -186,38 +186,37 @@ static inline void DISABLE_IRQ(void)
/***************************** Prototypes *****************************/
#ifdef REAL_DMA
-static int scsi_dma_is_ignored_buserr( unsigned char dma_stat );
-static void atari_scsi_fetch_restbytes( void );
-static long atari_scsi_dma_residual( struct Scsi_Host *instance );
-static int falcon_classify_cmd( Scsi_Cmnd *cmd );
-static unsigned long atari_dma_xfer_len( unsigned long wanted_len,
- Scsi_Cmnd *cmd, int write_flag );
+static int scsi_dma_is_ignored_buserr(unsigned char dma_stat);
+static void atari_scsi_fetch_restbytes(void);
+static long atari_scsi_dma_residual(struct Scsi_Host *instance);
+static int falcon_classify_cmd(Scsi_Cmnd *cmd);
+static unsigned long atari_dma_xfer_len(unsigned long wanted_len,
+ Scsi_Cmnd *cmd, int write_flag);
#endif
-static irqreturn_t scsi_tt_intr( int irq, void *dummy);
-static irqreturn_t scsi_falcon_intr( int irq, void *dummy);
-static void falcon_release_lock_if_possible( struct NCR5380_hostdata *
- hostdata );
-static void falcon_get_lock( void );
+static irqreturn_t scsi_tt_intr(int irq, void *dummy);
+static irqreturn_t scsi_falcon_intr(int irq, void *dummy);
+static void falcon_release_lock_if_possible(struct NCR5380_hostdata *hostdata);
+static void falcon_get_lock(void);
#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
-static void atari_scsi_reset_boot( void );
+static void atari_scsi_reset_boot(void);
#endif
-static unsigned char atari_scsi_tt_reg_read( unsigned char reg );
-static void atari_scsi_tt_reg_write( unsigned char reg, unsigned char value);
-static unsigned char atari_scsi_falcon_reg_read( unsigned char reg );
-static void atari_scsi_falcon_reg_write( unsigned char reg, unsigned char value );
+static unsigned char atari_scsi_tt_reg_read(unsigned char reg);
+static void atari_scsi_tt_reg_write(unsigned char reg, unsigned char value);
+static unsigned char atari_scsi_falcon_reg_read(unsigned char reg);
+static void atari_scsi_falcon_reg_write(unsigned char reg, unsigned char value);
/************************* End of Prototypes **************************/
-static struct Scsi_Host *atari_scsi_host = NULL;
-static unsigned char (*atari_scsi_reg_read)( unsigned char reg );
-static void (*atari_scsi_reg_write)( unsigned char reg, unsigned char value );
+static struct Scsi_Host *atari_scsi_host;
+static unsigned char (*atari_scsi_reg_read)(unsigned char reg);
+static void (*atari_scsi_reg_write)(unsigned char reg, unsigned char value);
#ifdef REAL_DMA
static unsigned long atari_dma_residual, atari_dma_startaddr;
static short atari_dma_active;
/* pointer to the dribble buffer */
-static char *atari_dma_buffer = NULL;
+static char *atari_dma_buffer;
/* precalculated physical address of the dribble buffer */
static unsigned long atari_dma_phys_buffer;
/* != 0 tells the Falcon int handler to copy data from the dribble buffer */
@@ -233,7 +232,7 @@ static char *atari_dma_orig_addr;
static unsigned long atari_dma_stram_mask;
#define STRAM_ADDR(a) (((a) & atari_dma_stram_mask) == 0)
/* number of bytes to cut from a transfer to handle NCR overruns */
-static int atari_read_overruns = 0;
+static int atari_read_overruns;
#endif
static int setup_can_queue = -1;
@@ -256,10 +255,10 @@ module_param(setup_hostid, int, 0);
#if defined(REAL_DMA)
-static int scsi_dma_is_ignored_buserr( unsigned char dma_stat )
+static int scsi_dma_is_ignored_buserr(unsigned char dma_stat)
{
int i;
- unsigned long addr = SCSI_DMA_READ_P( dma_addr ), end_addr;
+ unsigned long addr = SCSI_DMA_READ_P(dma_addr), end_addr;
if (dma_stat & 0x01) {
@@ -267,15 +266,14 @@ static int scsi_dma_is_ignored_buserr( unsigned char dma_stat )
* physical memory chunk (DMA prefetch!), but that doesn't hurt.
* Check for this case:
*/
-
- for( i = 0; i < m68k_num_memory; ++i ) {
- end_addr = m68k_memory[i].addr +
- m68k_memory[i].size;
+
+ for (i = 0; i < m68k_num_memory; ++i) {
+ end_addr = m68k_memory[i].addr + m68k_memory[i].size;
if (end_addr <= addr && addr <= end_addr + 4)
- return( 1 );
+ return 1;
}
}
- return( 0 );
+ return 0;
}
@@ -284,28 +282,27 @@ static int scsi_dma_is_ignored_buserr( unsigned char dma_stat )
* end-of-DMA, both SCSI ints are triggered simultaneously, so the NCR int has
* to clear the DMA int pending bit before it allows other level 6 interrupts.
*/
-static void scsi_dma_buserr (int irq, void *dummy)
+static void scsi_dma_buserr(int irq, void *dummy)
{
- unsigned char dma_stat = tt_scsi_dma.dma_ctrl;
+ unsigned char dma_stat = tt_scsi_dma.dma_ctrl;
/* Don't do anything if a NCR interrupt is pending. Probably it's just
* masked... */
- if (atari_irq_pending( IRQ_TT_MFP_SCSI ))
+ if (atari_irq_pending(IRQ_TT_MFP_SCSI))
return;
-
+
printk("Bad SCSI DMA interrupt! dma_addr=0x%08lx dma_stat=%02x dma_cnt=%08lx\n",
SCSI_DMA_READ_P(dma_addr), dma_stat, SCSI_DMA_READ_P(dma_cnt));
if (dma_stat & 0x80) {
- if (!scsi_dma_is_ignored_buserr( dma_stat ))
- printk( "SCSI DMA bus error -- bad DMA programming!\n" );
- }
- else {
+ if (!scsi_dma_is_ignored_buserr(dma_stat))
+ printk("SCSI DMA bus error -- bad DMA programming!\n");
+ } else {
/* Under normal circumstances we never should get to this point,
* since both interrupts are triggered simultaneously and the 5380
* int has higher priority. When this irq is handled, that DMA
* interrupt is cleared. So a warning message is printed here.
*/
- printk( "SCSI DMA intr ?? -- this shouldn't happen!\n" );
+ printk("SCSI DMA intr ?? -- this shouldn't happen!\n");
}
}
#endif
@@ -313,7 +310,7 @@ static void scsi_dma_buserr (int irq, void *dummy)
#endif
-static irqreturn_t scsi_tt_intr (int irq, void *dummy)
+static irqreturn_t scsi_tt_intr(int irq, void *dummy)
{
#ifdef REAL_DMA
int dma_stat;
@@ -327,7 +324,7 @@ static irqreturn_t scsi_tt_intr (int irq, void *dummy)
* is that a bus error occurred...
*/
if (dma_stat & 0x80) {
- if (!scsi_dma_is_ignored_buserr( dma_stat )) {
+ if (!scsi_dma_is_ignored_buserr(dma_stat)) {
printk(KERN_ERR "SCSI DMA caused bus error near 0x%08lx\n",
SCSI_DMA_READ_P(dma_addr));
printk(KERN_CRIT "SCSI DMA bus error -- bad DMA programming!");
@@ -344,8 +341,7 @@ static irqreturn_t scsi_tt_intr (int irq, void *dummy)
* data reg!
*/
if ((dma_stat & 0x02) && !(dma_stat & 0x40)) {
- atari_dma_residual = HOSTDATA_DMALEN - (SCSI_DMA_READ_P( dma_addr ) -
- atari_dma_startaddr);
+ atari_dma_residual = HOSTDATA_DMALEN - (SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
DMA_PRINTK("SCSI DMA: There are %ld residual bytes.\n",
atari_dma_residual);
@@ -353,28 +349,30 @@ static irqreturn_t scsi_tt_intr (int irq, void *dummy)
if ((signed int)atari_dma_residual < 0)
atari_dma_residual = 0;
if ((dma_stat & 1) == 0) {
- /* After read operations, we maybe have to
- transport some rest bytes */
+ /*
+ * After read operations, we maybe have to
+ * transport some rest bytes
+ */
atari_scsi_fetch_restbytes();
- }
- else {
- /* There seems to be a nasty bug in some SCSI-DMA/NCR
- combinations: If a target disconnects while a write
- operation is going on, the address register of the
- DMA may be a few bytes farer than it actually read.
- This is probably due to DMA prefetching and a delay
- between DMA and NCR. Experiments showed that the
- dma_addr is 9 bytes to high, but this could vary.
- The problem is, that the residual is thus calculated
- wrong and the next transfer will start behind where
- it should. So we round up the residual to the next
- multiple of a sector size, if it isn't already a
- multiple and the originally expected transfer size
- was. The latter condition is there to ensure that
- the correction is taken only for "real" data
- transfers and not for, e.g., the parameters of some
- other command. These shouldn't disconnect anyway.
- */
+ } else {
+ /*
+ * There seems to be a nasty bug in some SCSI-DMA/NCR
+ * combinations: If a target disconnects while a write
+ * operation is going on, the address register of the
+ * DMA may be a few bytes farer than it actually read.
+ * This is probably due to DMA prefetching and a delay
+ * between DMA and NCR. Experiments showed that the
+ * dma_addr is 9 bytes to high, but this could vary.
+ * The problem is, that the residual is thus calculated
+ * wrong and the next transfer will start behind where
+ * it should. So we round up the residual to the next
+ * multiple of a sector size, if it isn't already a
+ * multiple and the originally expected transfer size
+ * was. The latter condition is there to ensure that
+ * the correction is taken only for "real" data
+ * transfers and not for, e.g., the parameters of some
+ * other command. These shouldn't disconnect anyway.
+ */
if (atari_dma_residual & 0x1ff) {
DMA_PRINTK("SCSI DMA: DMA bug corrected, "
"difference %ld bytes\n",
@@ -394,18 +392,18 @@ static irqreturn_t scsi_tt_intr (int irq, void *dummy)
}
#endif /* REAL_DMA */
-
+
NCR5380_intr(0, 0);
#if 0
/* To be sure the int is not masked */
- atari_enable_irq( IRQ_TT_MFP_SCSI );
+ atari_enable_irq(IRQ_TT_MFP_SCSI);
#endif
return IRQ_HANDLED;
}
-static irqreturn_t scsi_falcon_intr (int irq, void *dummy)
+static irqreturn_t scsi_falcon_intr(int irq, void *dummy)
{
#ifdef REAL_DMA
int dma_stat;
@@ -430,7 +428,7 @@ static irqreturn_t scsi_falcon_intr (int irq, void *dummy)
* bytes are stuck in the ST-DMA fifo (there's no way to reach them!)
*/
if (atari_dma_active && (dma_stat & 0x02)) {
- unsigned long transferred;
+ unsigned long transferred;
transferred = SCSI_DMA_GETADR() - atari_dma_startaddr;
/* The ST-DMA address is incremented in 2-byte steps, but the
@@ -445,8 +443,7 @@ static irqreturn_t scsi_falcon_intr (int irq, void *dummy)
atari_dma_residual = HOSTDATA_DMALEN - transferred;
DMA_PRINTK("SCSI DMA: There are %ld residual bytes.\n",
atari_dma_residual);
- }
- else
+ } else
atari_dma_residual = 0;
atari_dma_active = 0;
@@ -467,7 +464,7 @@ static irqreturn_t scsi_falcon_intr (int irq, void *dummy)
#ifdef REAL_DMA
-static void atari_scsi_fetch_restbytes( void )
+static void atari_scsi_fetch_restbytes(void)
{
int nr;
char *src, *dst;
@@ -505,19 +502,17 @@ static int falcon_dont_release = 0;
* again (but others waiting longer more probably will win).
*/
-static void
-falcon_release_lock_if_possible( struct NCR5380_hostdata * hostdata )
+static void falcon_release_lock_if_possible(struct NCR5380_hostdata *hostdata)
{
unsigned long flags;
-
- if (IS_A_TT()) return;
-
+
+ if (IS_A_TT())
+ return;
+
local_irq_save(flags);
- if (falcon_got_lock &&
- !hostdata->disconnected_queue &&
- !hostdata->issue_queue &&
- !hostdata->connected) {
+ if (falcon_got_lock && !hostdata->disconnected_queue &&
+ !hostdata->issue_queue && !hostdata->connected) {
if (falcon_dont_release) {
#if 0
@@ -528,7 +523,7 @@ falcon_release_lock_if_possible( struct NCR5380_hostdata * hostdata )
}
falcon_got_lock = 0;
stdma_release();
- wake_up( &falcon_fairness_wait );
+ wake_up(&falcon_fairness_wait);
}
local_irq_restore(flags);
@@ -549,31 +544,31 @@ falcon_release_lock_if_possible( struct NCR5380_hostdata * hostdata )
* Complicated, complicated.... Sigh...
*/
-static void falcon_get_lock( void )
+static void falcon_get_lock(void)
{
unsigned long flags;
- if (IS_A_TT()) return;
+ if (IS_A_TT())
+ return;
local_irq_save(flags);
while (!in_irq() && falcon_got_lock && stdma_others_waiting())
- sleep_on( &falcon_fairness_wait );
+ sleep_on(&falcon_fairness_wait);
while (!falcon_got_lock) {
if (in_irq())
- panic( "Falcon SCSI hasn't ST-DMA lock in interrupt" );
+ panic("Falcon SCSI hasn't ST-DMA lock in interrupt");
if (!falcon_trying_lock) {
falcon_trying_lock = 1;
stdma_lock(scsi_falcon_intr, NULL);
falcon_got_lock = 1;
falcon_trying_lock = 0;
- wake_up( &falcon_try_wait );
- }
- else {
- sleep_on( &falcon_try_wait );
+ wake_up(&falcon_try_wait);
+ } else {
+ sleep_on(&falcon_try_wait);
}
- }
+ }
local_irq_restore(flags);
if (!falcon_got_lock)
@@ -587,18 +582,18 @@ static void falcon_get_lock( void )
*/
#if 0
-int atari_queue_command (Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
+int atari_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
{
/* falcon_get_lock();
* ++guenther: moved to NCR5380_queue_command() to prevent
* race condition, see there for an explanation.
*/
- return( NCR5380_queue_command( cmd, done ) );
+ return NCR5380_queue_command(cmd, done);
}
#endif
-int atari_scsi_detect (struct scsi_host_template *host)
+int atari_scsi_detect(struct scsi_host_template *host)
{
static int called = 0;
struct Scsi_Host *instance;
@@ -606,7 +601,7 @@ int atari_scsi_detect (struct scsi_host_template *host)
if (!MACH_IS_ATARI ||
(!ATARIHW_PRESENT(ST_SCSI) && !ATARIHW_PRESENT(TT_SCSI)) ||
called)
- return( 0 );
+ return 0;
host->proc_name = "Atari";
@@ -655,32 +650,33 @@ int atari_scsi_detect (struct scsi_host_template *host)
!ATARIHW_PRESENT(EXTD_DMA) && m68k_num_memory > 1) {
atari_dma_buffer = atari_stram_alloc(STRAM_BUFFER_SIZE, "SCSI");
if (!atari_dma_buffer) {
- printk( KERN_ERR "atari_scsi_detect: can't allocate ST-RAM "
- "double buffer\n" );
- return( 0 );
+ printk(KERN_ERR "atari_scsi_detect: can't allocate ST-RAM "
+ "double buffer\n");
+ return 0;
}
- atari_dma_phys_buffer = virt_to_phys( atari_dma_buffer );
+ atari_dma_phys_buffer = virt_to_phys(atari_dma_buffer);
atari_dma_orig_addr = 0;
}
#endif
- instance = scsi_register (host, sizeof (struct NCR5380_hostdata));
- if(instance == NULL)
- {
+ instance = scsi_register(host, sizeof(struct NCR5380_hostdata));
+ if (instance == NULL) {
atari_stram_free(atari_dma_buffer);
atari_dma_buffer = 0;
return 0;
}
atari_scsi_host = instance;
- /* Set irq to 0, to avoid that the mid-level code disables our interrupt
- * during queue_command calls. This is completely unnecessary, and even
- * worse causes bad problems on the Falcon, where the int is shared with
- * IDE and floppy! */
+ /*
+ * Set irq to 0, to avoid that the mid-level code disables our interrupt
+ * during queue_command calls. This is completely unnecessary, and even
+ * worse causes bad problems on the Falcon, where the int is shared with
+ * IDE and floppy!
+ */
instance->irq = 0;
#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
atari_scsi_reset_boot();
#endif
- NCR5380_init (instance, 0);
+ NCR5380_init(instance, 0);
if (IS_A_TT()) {
@@ -727,11 +723,10 @@ int atari_scsi_detect (struct scsi_host_template *host)
* the rest data bug is fixed, this can be lowered to 1.
*/
atari_read_overruns = 4;
- }
+ }
#endif /*REAL_DMA*/
- }
- else { /* ! IS_A_TT */
-
+ } else { /* ! IS_A_TT */
+
/* Nothing to do for the interrupt: the ST-DMA is initialized
* already by atari_init_INTS()
*/
@@ -756,19 +751,19 @@ int atari_scsi_detect (struct scsi_host_template *host)
setup_use_tagged_queuing ? "yes" : "no",
#endif
instance->hostt->this_id );
- NCR5380_print_options (instance);
- printk ("\n");
+ NCR5380_print_options(instance);
+ printk("\n");
called = 1;
- return( 1 );
+ return 1;
}
-int atari_scsi_release (struct Scsi_Host *sh)
+int atari_scsi_release(struct Scsi_Host *sh)
{
if (IS_A_TT())
free_irq(IRQ_TT_MFP_SCSI, scsi_tt_intr);
if (atari_dma_buffer)
- atari_stram_free (atari_dma_buffer);
+ atari_stram_free(atari_dma_buffer);
return 1;
}
@@ -779,9 +774,9 @@ void __init atari_scsi_setup(char *str, int *ints)
* Defaults depend on TT or Falcon, hostid determined at run time.
* Negative values mean don't change.
*/
-
+
if (ints[0] < 1) {
- printk( "atari_scsi_setup: no arguments!\n" );
+ printk("atari_scsi_setup: no arguments!\n");
return;
}
@@ -807,7 +802,7 @@ void __init atari_scsi_setup(char *str, int *ints)
if (ints[4] >= 0 && ints[4] <= 7)
setup_hostid = ints[4];
else if (ints[4] > 7)
- printk( "atari_scsi_setup: invalid host ID %d !\n", ints[4] );
+ printk("atari_scsi_setup: invalid host ID %d !\n", ints[4]);
}
#ifdef SUPPORT_TAGS
if (ints[0] >= 5) {
@@ -819,7 +814,7 @@ void __init atari_scsi_setup(char *str, int *ints)
int atari_scsi_bus_reset(Scsi_Cmnd *cmd)
{
- int rv;
+ int rv;
struct NCR5380_hostdata *hostdata =
(struct NCR5380_hostdata *)cmd->device->host->hostdata;
@@ -829,13 +824,12 @@ int atari_scsi_bus_reset(Scsi_Cmnd *cmd)
*/
/* And abort a maybe active DMA transfer */
if (IS_A_TT()) {
- atari_turnoff_irq( IRQ_TT_MFP_SCSI );
+ atari_turnoff_irq(IRQ_TT_MFP_SCSI);
#ifdef REAL_DMA
tt_scsi_dma.dma_ctrl = 0;
#endif /* REAL_DMA */
- }
- else {
- atari_turnoff_irq( IRQ_MFP_FSCSI );
+ } else {
+ atari_turnoff_irq(IRQ_MFP_FSCSI);
#ifdef REAL_DMA
st_dma.dma_mode_status = 0x90;
atari_dma_active = 0;
@@ -847,52 +841,51 @@ int atari_scsi_bus_reset(Scsi_Cmnd *cmd)
/* Re-enable ints */
if (IS_A_TT()) {
- atari_turnon_irq( IRQ_TT_MFP_SCSI );
- }
- else {
- atari_turnon_irq( IRQ_MFP_FSCSI );
+ atari_turnon_irq(IRQ_TT_MFP_SCSI);
+ } else {
+ atari_turnon_irq(IRQ_MFP_FSCSI);
}
if ((rv & SCSI_RESET_ACTION) == SCSI_RESET_SUCCESS)
falcon_release_lock_if_possible(hostdata);
- return( rv );
+ return rv;
}
-
+
#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
static void __init atari_scsi_reset_boot(void)
{
unsigned long end;
-
+
/*
* Do a SCSI reset to clean up the bus during initialization. No messing
* with the queues, interrupts, or locks necessary here.
*/
- printk( "Atari SCSI: resetting the SCSI bus..." );
+ printk("Atari SCSI: resetting the SCSI bus...");
/* get in phase */
- NCR5380_write( TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
+ NCR5380_write(TARGET_COMMAND_REG,
+ PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG)));
/* assert RST */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
/* The min. reset hold time is 25us, so 40us should be enough */
- udelay( 50 );
+ udelay(50);
/* reset RST and interrupt */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
- NCR5380_read( RESET_PARITY_INTERRUPT_REG );
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
end = jiffies + AFTER_RESET_DELAY;
while (time_before(jiffies, end))
barrier();
- printk( " done\n" );
+ printk(" done\n");
}
#endif
-const char * atari_scsi_info (struct Scsi_Host *host)
+const char *atari_scsi_info(struct Scsi_Host *host)
{
/* atari_scsi_detect() is verbose enough... */
static const char string[] = "Atari native SCSI";
@@ -902,10 +895,10 @@ const char * atari_scsi_info (struct Scsi_Host *host)
#if defined(REAL_DMA)
-unsigned long atari_scsi_dma_setup( struct Scsi_Host *instance, void *data,
- unsigned long count, int dir )
+unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance, void *data,
+ unsigned long count, int dir)
{
- unsigned long addr = virt_to_phys( data );
+ unsigned long addr = virt_to_phys(data);
DMA_PRINTK("scsi%d: setting up dma, data = %p, phys = %lx, count = %ld, "
"dir = %d\n", instance->host_no, data, addr, count, dir);
@@ -917,38 +910,37 @@ unsigned long atari_scsi_dma_setup( struct Scsi_Host *instance, void *data,
* wanted address.
*/
if (dir)
- memcpy( atari_dma_buffer, data, count );
+ memcpy(atari_dma_buffer, data, count);
else
atari_dma_orig_addr = data;
addr = atari_dma_phys_buffer;
}
-
+
atari_dma_startaddr = addr; /* Needed for calculating residual later. */
-
+
/* Cache cleanup stuff: On writes, push any dirty cache out before sending
* it to the peripheral. (Must be done before DMA setup, since at least
* the ST-DMA begins to fill internal buffers right after setup. For
* reads, invalidate any cache, may be altered after DMA without CPU
* knowledge.
- *
+ *
* ++roman: For the Medusa, there's no need at all for that cache stuff,
* because the hardware does bus snooping (fine!).
*/
- dma_cache_maintenance( addr, count, dir );
+ dma_cache_maintenance(addr, count, dir);
if (count == 0)
printk(KERN_NOTICE "SCSI warning: DMA programmed for 0 bytes !\n");
if (IS_A_TT()) {
tt_scsi_dma.dma_ctrl = dir;
- SCSI_DMA_WRITE_P( dma_addr, addr );
- SCSI_DMA_WRITE_P( dma_cnt, count );
+ SCSI_DMA_WRITE_P(dma_addr, addr);
+ SCSI_DMA_WRITE_P(dma_cnt, count);
tt_scsi_dma.dma_ctrl = dir | 2;
- }
- else { /* ! IS_A_TT */
-
+ } else { /* ! IS_A_TT */
+
/* set address */
- SCSI_DMA_SETADR( addr );
+ SCSI_DMA_SETADR(addr);
/* toggle direction bit to clear FIFO and set DMA direction */
dir <<= 8;
@@ -966,13 +958,13 @@ unsigned long atari_scsi_dma_setup( struct Scsi_Host *instance, void *data,
atari_dma_active = 1;
}
- return( count );
+ return count;
}
-static long atari_scsi_dma_residual( struct Scsi_Host *instance )
+static long atari_scsi_dma_residual(struct Scsi_Host *instance)
{
- return( atari_dma_residual );
+ return atari_dma_residual;
}
@@ -980,13 +972,13 @@ static long atari_scsi_dma_residual( struct Scsi_Host *instance )
#define CMD_SURELY_BYTE_MODE 1
#define CMD_MODE_UNKNOWN 2
-static int falcon_classify_cmd( Scsi_Cmnd *cmd )
+static int falcon_classify_cmd(Scsi_Cmnd *cmd)
{
unsigned char opcode = cmd->cmnd[0];
-
+
if (opcode == READ_DEFECT_DATA || opcode == READ_LONG ||
- opcode == READ_BUFFER)
- return( CMD_SURELY_BYTE_MODE );
+ opcode == READ_BUFFER)
+ return CMD_SURELY_BYTE_MODE;
else if (opcode == READ_6 || opcode == READ_10 ||
opcode == 0xa8 /* READ_12 */ || opcode == READ_REVERSE ||
opcode == RECOVER_BUFFERED_DATA) {
@@ -994,12 +986,11 @@ static int falcon_classify_cmd( Scsi_Cmnd *cmd )
* needed here: The transfer is block-mode only if the 'fixed' bit is
* set! */
if (cmd->device->type == TYPE_TAPE && !(cmd->cmnd[1] & 1))
- return( CMD_SURELY_BYTE_MODE );
+ return CMD_SURELY_BYTE_MODE;
else
- return( CMD_SURELY_BLOCK_MODE );
- }
- else
- return( CMD_MODE_UNKNOWN );
+ return CMD_SURELY_BLOCK_MODE;
+ } else
+ return CMD_MODE_UNKNOWN;
}
@@ -1012,19 +1003,18 @@ static int falcon_classify_cmd( Scsi_Cmnd *cmd )
* the overrun problem, so this question is academic :-)
*/
-static unsigned long atari_dma_xfer_len( unsigned long wanted_len,
- Scsi_Cmnd *cmd,
- int write_flag )
+static unsigned long atari_dma_xfer_len(unsigned long wanted_len,
+ Scsi_Cmnd *cmd, int write_flag)
{
unsigned long possible_len, limit;
#ifndef CONFIG_TT_DMA_EMUL
if (MACH_IS_HADES)
/* Hades has no SCSI DMA at all :-( Always force use of PIO */
- return( 0 );
-#endif
+ return 0;
+#endif
if (IS_A_TT())
/* TT SCSI DMA can transfer arbitrary #bytes */
- return( wanted_len );
+ return wanted_len;
/* ST DMA chip is stupid -- only multiples of 512 bytes! (and max.
* 255*512 bytes, but this should be enough)
@@ -1060,8 +1050,7 @@ static unsigned long atari_dma_xfer_len( unsigned long wanted_len,
* this).
*/
possible_len = wanted_len;
- }
- else {
+ } else {
/* Read operations: if the wanted transfer length is not a multiple of
* 512, we cannot use DMA, since the ST-DMA cannot split transfers
* (no interrupt on DMA finished!)
@@ -1071,15 +1060,15 @@ static unsigned long atari_dma_xfer_len( unsigned long wanted_len,
else {
/* Now classify the command (see above) and decide whether it is
* allowed to do DMA at all */
- switch( falcon_classify_cmd( cmd )) {
- case CMD_SURELY_BLOCK_MODE:
+ switch (falcon_classify_cmd(cmd)) {
+ case CMD_SURELY_BLOCK_MODE:
possible_len = wanted_len;
break;
- case CMD_SURELY_BYTE_MODE:
+ case CMD_SURELY_BYTE_MODE:
possible_len = 0; /* DMA prohibited */
break;
- case CMD_MODE_UNKNOWN:
- default:
+ case CMD_MODE_UNKNOWN:
+ default:
/* For unknown commands assume block transfers if the transfer
* size/allocation length is >= 1024 */
possible_len = (wanted_len < 1024) ? 0 : wanted_len;
@@ -1087,9 +1076,9 @@ static unsigned long atari_dma_xfer_len( unsigned long wanted_len,
}
}
}
-
+
/* Last step: apply the hard limit on DMA transfers */
- limit = (atari_dma_buffer && !STRAM_ADDR( virt_to_phys(cmd->SCp.ptr) )) ?
+ limit = (atari_dma_buffer && !STRAM_ADDR(virt_to_phys(cmd->SCp.ptr))) ?
STRAM_BUFFER_SIZE : 255*512;
if (possible_len > limit)
possible_len = limit;
@@ -1098,7 +1087,7 @@ static unsigned long atari_dma_xfer_len( unsigned long wanted_len,
DMA_PRINTK("Sorry, must cut DMA transfer size to %ld bytes "
"instead of %ld\n", possible_len, wanted_len);
- return( possible_len );
+ return possible_len;
}
@@ -1112,23 +1101,23 @@ static unsigned long atari_dma_xfer_len( unsigned long wanted_len,
* NCR5380_write call these functions via function pointers.
*/
-static unsigned char atari_scsi_tt_reg_read( unsigned char reg )
+static unsigned char atari_scsi_tt_reg_read(unsigned char reg)
{
- return( tt_scsi_regp[reg * 2] );
+ return tt_scsi_regp[reg * 2];
}
-static void atari_scsi_tt_reg_write( unsigned char reg, unsigned char value )
+static void atari_scsi_tt_reg_write(unsigned char reg, unsigned char value)
{
tt_scsi_regp[reg * 2] = value;
}
-static unsigned char atari_scsi_falcon_reg_read( unsigned char reg )
+static unsigned char atari_scsi_falcon_reg_read(unsigned char reg)
{
dma_wd.dma_mode_status= (u_short)(0x88 + reg);
- return( (u_char)dma_wd.fdc_acces_seccount );
+ return (u_char)dma_wd.fdc_acces_seccount;
}
-static void atari_scsi_falcon_reg_write( unsigned char reg, unsigned char value )
+static void atari_scsi_falcon_reg_write(unsigned char reg, unsigned char value)
{
dma_wd.dma_mode_status = (u_short)(0x88 + reg);
dma_wd.fdc_acces_seccount = (u_short)value;