aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2008-10-15 11:31:54 +1100
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>2008-10-15 11:31:54 +1100
commit6dc6472581f693b5fc95aebedf67b4960fb85cf0 (patch)
tree06a5a9a08519950575505273eabced331ed51405 /drivers/serial
parentee673eaa72d8d185012b1027a05e25aba18c267f (diff)
parent8acd3a60bcca17c6d89c73cee3ad6057eb83ba1e (diff)
Merge commit 'origin'
Manual fixup of conflicts on: arch/powerpc/include/asm/dcr-regs.h drivers/net/ibm_newemac/core.h
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c49
-rw-r--r--drivers/serial/8250_pci.c4
-rw-r--r--drivers/serial/Kconfig17
-rw-r--r--drivers/serial/Makefile16
-rw-r--r--drivers/serial/atmel_serial.c32
-rw-r--r--drivers/serial/bfin_5xx.c123
-rw-r--r--drivers/serial/crisv10.c5
-rw-r--r--drivers/serial/imx.c27
-rw-r--r--drivers/serial/mcfserial.c1965
-rw-r--r--drivers/serial/mcfserial.h74
-rw-r--r--drivers/serial/pxa.c5
-rw-r--r--drivers/serial/serial_core.c12
-rw-r--r--drivers/serial/serial_cs.c302
-rw-r--r--drivers/serial/serial_ks8695.c61
-rw-r--r--drivers/serial/sunhv.c2
-rw-r--r--drivers/serial/sunsab.c2
-rw-r--r--drivers/serial/sunsu.c2
-rw-r--r--drivers/serial/sunzilog.c2
18 files changed, 383 insertions, 2317 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 9ccc563d873..d3ca7d32abe 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -44,6 +44,10 @@
#include "8250.h"
+#ifdef CONFIG_SPARC
+#include "suncore.h"
+#endif
+
/*
* Configuration:
* share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
@@ -53,6 +57,13 @@ static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
+static struct uart_driver serial8250_reg;
+
+static int serial_index(struct uart_port *port)
+{
+ return (serial8250_reg.minor - 64) + port->line;
+}
+
/*
* Debugging.
*/
@@ -536,7 +547,7 @@ static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
/*
* FIFO support.
*/
-static inline void serial8250_clear_fifos(struct uart_8250_port *p)
+static void serial8250_clear_fifos(struct uart_8250_port *p)
{
if (p->capabilities & UART_CAP_FIFO) {
serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
@@ -551,7 +562,7 @@ static inline void serial8250_clear_fifos(struct uart_8250_port *p)
* capability" bit enabled. Note that on XR16C850s, we need to
* reset LCR to write to IER.
*/
-static inline void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
+static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
{
if (p->capabilities & UART_CAP_SLEEP) {
if (p->capabilities & UART_CAP_EFR) {
@@ -993,7 +1004,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
return;
DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ",
- up->port.line, up->port.iobase, up->port.membase);
+ serial_index(&up->port), up->port.iobase, up->port.membase);
/*
* We really do need global IRQs disabled here - we're going to
@@ -1128,8 +1139,8 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
if (up->capabilities != uart_config[up->port.type].flags) {
printk(KERN_WARNING
"ttyS%d: detected caps %08x should be %08x\n",
- up->port.line, up->capabilities,
- uart_config[up->port.type].flags);
+ serial_index(&up->port), up->capabilities,
+ uart_config[up->port.type].flags);
}
up->port.fifosize = uart_config[up->port.type].fifo_size;
@@ -1424,8 +1435,7 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
/*
* This handles the interrupt from one port.
*/
-static inline void
-serial8250_handle_port(struct uart_8250_port *up)
+static void serial8250_handle_port(struct uart_8250_port *up)
{
unsigned int status;
unsigned long flags;
@@ -1719,7 +1729,7 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state)
/*
* Wait for transmitter & holding register to empty
*/
-static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
+static void wait_for_xmitr(struct uart_8250_port *up, int bits)
{
unsigned int status, tmout = 10000;
@@ -1854,7 +1864,8 @@ static int serial8250_startup(struct uart_port *port)
*/
if (!(up->port.flags & UPF_BUGGY_UART) &&
(serial_inp(up, UART_LSR) == 0xff)) {
- printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
+ printk(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
+ serial_index(&up->port));
return -ENODEV;
}
@@ -1909,7 +1920,8 @@ static int serial8250_startup(struct uart_port *port)
*/
if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
up->bugs |= UART_BUG_THRE;
- pr_debug("ttyS%d - using backup timer\n", port->line);
+ pr_debug("ttyS%d - using backup timer\n",
+ serial_index(port));
}
}
@@ -1969,7 +1981,7 @@ static int serial8250_startup(struct uart_port *port)
if (!(up->bugs & UART_BUG_TXEN)) {
up->bugs |= UART_BUG_TXEN;
pr_debug("ttyS%d - enabling bad tx status workarounds\n",
- port->line);
+ serial_index(port));
}
} else {
up->bugs &= ~UART_BUG_TXEN;
@@ -2630,7 +2642,6 @@ static int serial8250_console_early_setup(void)
return serial8250_find_port_for_earlycon();
}
-static struct uart_driver serial8250_reg;
static struct console serial8250_console = {
.name = "ttyS",
.write = serial8250_console_write,
@@ -2677,7 +2688,6 @@ static struct uart_driver serial8250_reg = {
.dev_name = "ttyS",
.major = TTY_MAJOR,
.minor = 64,
- .nr = UART_NR,
.cons = SERIAL8250_CONSOLE,
};
@@ -2962,7 +2972,12 @@ static int __init serial8250_init(void)
for (i = 0; i < NR_IRQS; i++)
spin_lock_init(&irq_lists[i].lock);
+#ifdef CONFIG_SPARC
+ ret = sunserial_register_minors(&serial8250_reg, UART_NR);
+#else
+ serial8250_reg.nr = UART_NR;
ret = uart_register_driver(&serial8250_reg);
+#endif
if (ret)
goto out;
@@ -2987,7 +3002,11 @@ static int __init serial8250_init(void)
put_dev:
platform_device_put(serial8250_isa_devs);
unreg_uart_drv:
+#ifdef CONFIG_SPARC
+ sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
uart_unregister_driver(&serial8250_reg);
+#endif
out:
return ret;
}
@@ -3006,7 +3025,11 @@ static void __exit serial8250_exit(void)
platform_driver_unregister(&serial8250_isa_driver);
platform_device_unregister(isa_dev);
+#ifdef CONFIG_SPARC
+ sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
uart_unregister_driver(&serial8250_reg);
+#endif
}
module_init(serial8250_init);
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index c2f23933155..c014ffb110e 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2041,9 +2041,9 @@ static int pciserial_resume_one(struct pci_dev *dev)
* The device may have been disabled. Re-enable it.
*/
err = pci_enable_device(dev);
+ /* FIXME: We cannot simply error out here */
if (err)
- return err;
-
+ printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n");
pciserial_resume_ports(priv);
}
return 0;
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index b87b1cf9df6..db783b77a88 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -9,7 +9,6 @@ menu "Serial drivers"
# The new 8250/16550 serial drivers
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
- depends on (BROKEN || !SPARC)
select SERIAL_CORE
---help---
This selects whether you want to include the driver for the standard
@@ -994,24 +993,12 @@ config SERIAL_68328_RTS_CTS
bool "Support RTS/CTS on 68328 serial port"
depends on SERIAL_68328
-config SERIAL_COLDFIRE
- bool "ColdFire serial support (DEPRECATED)"
- depends on COLDFIRE
- help
- This driver supports the built-in serial ports of the Motorola ColdFire
- family of CPUs.
- This driver is deprecated because it supports only the old interface
- for serial drivers and features like magic keys are not working.
- Please switch to the new style driver because this driver will be
- removed soon.
-
config SERIAL_MCF
- bool "Coldfire serial support (new style driver)"
+ bool "Coldfire serial support"
depends on COLDFIRE
select SERIAL_CORE
help
- This new serial driver supports the Freescale Coldfire serial ports
- using the new serial driver subsystem.
+ This serial driver supports the Freescale Coldfire serial ports.
config SERIAL_MCF_BAUDRATE
int "Default baudrate for Coldfire serial ports"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 7e7383e890d..0c17c8ddb19 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -4,6 +4,16 @@
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
obj-$(CONFIG_SERIAL_21285) += 21285.o
+
+# These Sparc drivers have to appear before others such as 8250
+# which share ttySx minor node space. Otherwise console device
+# names change and other unplesantries.
+obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
+obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
+obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
+obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
+obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
+
obj-$(CONFIG_SERIAL_8250) += 8250.o
obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
@@ -31,16 +41,10 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
-obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
-obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
-obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
-obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
-obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
obj-$(CONFIG_SERIAL_68360) += 68360serial.o
-obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
obj-$(CONFIG_SERIAL_MCF) += mcf.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 3a6da80b081..61fb8b6d19a 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -131,7 +131,8 @@ struct atmel_uart_char {
struct atmel_uart_port {
struct uart_port uart; /* uart */
struct clk *clk; /* uart clock */
- unsigned short suspended; /* is port suspended? */
+ int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */
+ u32 backup_imr; /* IMR saved during suspend */
int break_active; /* break being received */
short use_dma_rx; /* enable PDC receiver */
@@ -984,8 +985,15 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
* This is called on uart_open() or a resume event.
*/
clk_enable(atmel_port->clk);
+
+ /* re-enable interrupts if we disabled some on suspend */
+ UART_PUT_IER(port, atmel_port->backup_imr);
break;
case 3:
+ /* Back up the interrupt mask and disable all interrupts */
+ atmel_port->backup_imr = UART_GET_IMR(port);
+ UART_PUT_IDR(port, -1);
+
/*
* Disable the peripheral clock for this serial port.
* This is called on uart_close() or a suspend event.
@@ -1475,13 +1483,12 @@ static int atmel_serial_suspend(struct platform_device *pdev,
cpu_relax();
}
- if (device_may_wakeup(&pdev->dev)
- && !atmel_serial_clk_will_stop())
- enable_irq_wake(port->irq);
- else {
- uart_suspend_port(&atmel_uart, port);
- atmel_port->suspended = 1;
- }
+ /* we can not wake up if we're running on slow clock */
+ atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
+ if (atmel_serial_clk_will_stop())
+ device_set_wakeup_enable(&pdev->dev, 0);
+
+ uart_suspend_port(&atmel_uart, port);
return 0;
}
@@ -1491,11 +1498,8 @@ static int atmel_serial_resume(struct platform_device *pdev)
struct uart_port *port = platform_get_drvdata(pdev);
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- if (atmel_port->suspended) {
- uart_resume_port(&atmel_uart, port);
- atmel_port->suspended = 0;
- } else
- disable_irq_wake(port->irq);
+ uart_resume_port(&atmel_uart, port);
+ device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
return 0;
}
@@ -1513,6 +1517,8 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
port = &atmel_ports[pdev->id];
+ port->backup_imr = 0;
+
atmel_init_port(port, pdev);
if (!atmel_use_dma_rx(&port->uart)) {
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 4a0d30bed9f..569f0e2476c 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1,7 +1,7 @@
/*
* Blackfin On-Chip Serial Driver
*
- * Copyright 2006-2007 Analog Devices Inc.
+ * Copyright 2006-2008 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
@@ -42,6 +42,9 @@
#define BFIN_SERIAL_MAJOR 204
#define BFIN_SERIAL_MINOR 64
+static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
+static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource);
+
/*
* Setup for console. Argument comes from the menuconfig
*/
@@ -126,13 +129,13 @@ static int kgdb_entry_state;
void kgdb_put_debug_char(int chr)
{
struct bfin_serial_port *uart;
-
+
if (CONFIG_KGDB_UART_PORT < 0
|| CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
uart = &bfin_serial_ports[0];
else
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-
+
while (!(UART_GET_LSR(uart) & THRE)) {
SSYNC();
}
@@ -152,7 +155,7 @@ int kgdb_get_debug_char(void)
uart = &bfin_serial_ports[0];
else
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-
+
while(!(UART_GET_LSR(uart) & DR)) {
SSYNC();
}
@@ -298,7 +301,11 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
bfin_serial_mctrl_check(uart);
if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
- bfin_serial_stop_tx(&uart->port);
+#ifdef CONFIG_BF54x
+ /* Clear TFI bit */
+ UART_PUT_LSR(uart, TFI);
+#endif
+ UART_CLEAR_IER(uart, ETBEI);
return;
}
@@ -317,9 +324,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&uart->port);
-
- if (uart_circ_empty(xmit))
- bfin_serial_stop_tx(&uart->port);
}
static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
@@ -645,6 +649,42 @@ static int bfin_serial_startup(struct uart_port *port)
free_irq(uart->port.irq, uart);
return -EBUSY;
}
+
+# ifdef CONFIG_BF54x
+ {
+ unsigned uart_dma_ch_rx, uart_dma_ch_tx;
+
+ switch (uart->port.irq) {
+ case IRQ_UART3_RX:
+ uart_dma_ch_rx = CH_UART3_RX;
+ uart_dma_ch_tx = CH_UART3_TX;
+ break;
+ case IRQ_UART2_RX:
+ uart_dma_ch_rx = CH_UART2_RX;
+ uart_dma_ch_tx = CH_UART2_TX;
+ break;
+ default:
+ uart_dma_ch_rx = uart_dma_ch_tx = 0;
+ break;
+ };
+
+ if (uart_dma_ch_rx &&
+ request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
+ printk(KERN_NOTICE"Fail to attach UART interrupt\n");
+ free_irq(uart->port.irq, uart);
+ free_irq(uart->port.irq + 1, uart);
+ return -EBUSY;
+ }
+ if (uart_dma_ch_tx &&
+ request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) {
+ printk(KERN_NOTICE "Fail to attach UART interrupt\n");
+ free_dma(uart_dma_ch_rx);
+ free_irq(uart->port.irq, uart);
+ free_irq(uart->port.irq + 1, uart);
+ return -EBUSY;
+ }
+ }
+# endif
#endif
UART_SET_IER(uart, ERBFI);
return 0;
@@ -662,6 +702,20 @@ static void bfin_serial_shutdown(struct uart_port *port)
del_timer(&(uart->rx_dma_timer));
dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0);
#else
+#ifdef CONFIG_BF54x
+ switch (uart->port.irq) {
+ case IRQ_UART3_RX:
+ free_dma(CH_UART3_RX);
+ free_dma(CH_UART3_TX);
+ break;
+ case IRQ_UART2_RX:
+ free_dma(CH_UART2_RX);
+ free_dma(CH_UART2_TX);
+ break;
+ default:
+ break;
+ };
+#endif
#ifdef CONFIG_KGDB_UART
if (uart->port.line != CONFIG_KGDB_UART_PORT)
#endif
@@ -757,6 +811,9 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
val |= UCEN;
UART_PUT_GCTL(uart, val);
+ /* Port speed changed, update the per-port timeout. */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
spin_unlock_irqrestore(&uart->port.lock, flags);
}
@@ -859,8 +916,9 @@ static void __init bfin_serial_init_ports(void)
return;
first = 0;
- for (i = 0; i < nr_ports; i++) {
+ for (i = 0; i < nr_active_ports; i++) {
bfin_serial_ports[i].port.uartclk = get_sclk();
+ bfin_serial_ports[i].port.fifosize = BFIN_UART_TX_FIFO_SIZE;
bfin_serial_ports[i].port.ops = &bfin_serial_pops;
bfin_serial_ports[i].port.line = i;
bfin_serial_ports[i].port.iotype = UPIO_MEM;
@@ -961,7 +1019,7 @@ bfin_serial_console_setup(struct console *co, char *options)
* if so, search for the first available port that does have
* console support.
*/
- if (co->index == -1 || co->index >= nr_ports)
+ if (co->index == -1 || co->index >= nr_active_ports)
co->index = 0;
uart = &bfin_serial_ports[co->index];
@@ -1056,7 +1114,7 @@ static __init void early_serial_write(struct console *con, const char *s,
}
}
-static struct __init console bfin_early_serial_console = {
+static struct __initdata console bfin_early_serial_console = {
.name = "early_BFuart",
.write = early_serial_write,
.device = uart_console_device,
@@ -1072,7 +1130,7 @@ struct console __init *bfin_earlyserial_init(unsigned int port,
struct bfin_serial_port *uart;
struct ktermios t;
- if (port == -1 || port >= nr_ports)
+ if (port == -1 || port >= nr_active_ports)
port = 0;
bfin_serial_init_ports();
bfin_early_serial_console.index = port;
@@ -1100,20 +1158,26 @@ static struct uart_driver bfin_serial_reg = {
static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state)
{
- struct bfin_serial_port *uart = platform_get_drvdata(dev);
+ int i;
- if (uart)
- uart_suspend_port(&bfin_serial_reg, &uart->port);
+ for (i = 0; i < nr_active_ports; i++) {
+ if (bfin_serial_ports[i].port.dev != &dev->dev)
+ continue;
+ uart_suspend_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ }
return 0;
}
static int bfin_serial_resume(struct platform_device *dev)
{
- struct bfin_serial_port *uart = platform_get_drvdata(dev);
+ int i;
- if (uart)
- uart_resume_port(&bfin_serial_reg, &uart->port);
+ for (i = 0; i < nr_active_ports; i++) {
+ if (bfin_serial_ports[i].port.dev != &dev->dev)
+ continue;
+ uart_resume_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ }
return 0;
}
@@ -1128,32 +1192,31 @@ static int bfin_serial_probe(struct platform_device *dev)
break;
if (i < dev->num_resources) {
- for (i = 0; i < nr_ports; i++, res++) {
+ for (i = 0; i < nr_active_ports; i++, res++) {
if (bfin_serial_ports[i].port.mapbase != res->start)
continue;
bfin_serial_ports[i].port.dev = &dev->dev;
uart_add_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
- platform_set_drvdata(dev, &bfin_serial_ports[i]);
}
}
return 0;
}
-static int bfin_serial_remove(struct platform_device *pdev)
+static int bfin_serial_remove(struct platform_device *dev)
{
- struct bfin_serial_port *uart = platform_get_drvdata(pdev);
-
+ int i;
+ for (i = 0; i < nr_active_ports; i++) {
+ if (bfin_serial_ports[i].port.dev != &dev->dev)
+ continue;
+ uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ bfin_serial_ports[i].port.dev = NULL;
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- gpio_free(uart->cts_pin);
- gpio_free(uart->rts_pin);
+ gpio_free(bfin_serial_ports[i].cts_pin);
+ gpio_free(bfin_serial_ports[i].rts_pin);
#endif
-
- platform_set_drvdata(pdev, NULL);
-
- if (uart)
- uart_remove_one_port(&bfin_serial_reg, &uart->port);
+ }
return 0;
}
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index bf94a770bb4..211c21797ce 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -457,7 +457,6 @@ static struct e100_serial rs_table[] = {
#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
static struct ktermios *serial_termios[NR_PORTS];
-static struct ktermios *serial_termios_locked[NR_PORTS];
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
static struct fast_timer fast_timers[NR_PORTS];
#endif
@@ -4419,6 +4418,7 @@ rs_init(void)
rs485_pa_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
+ put_tty_driver(driver);
return -EBUSY;
}
#endif
@@ -4427,6 +4427,7 @@ rs_init(void)
rs485_port_g_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
+ put_tty_driver(driver);
return -EBUSY;
}
#endif
@@ -4446,8 +4447,6 @@ rs_init(void)
driver->init_termios.c_ispeed = 115200;
driver->init_termios.c_ospeed = 115200;
driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- driver->termios = serial_termios;
- driver->termios_locked = serial_termios_locked;
tty_set_operations(driver, &rs_ops);
serial_driver = driver;
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 6a29f9330a7..3f90f1bbbbc 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -127,8 +127,13 @@
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
-#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
+#ifdef CONFIG_ARCH_IMX
+#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
+#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
+#endif
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+#define UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
+#endif
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
#define UCR3_BPEN (1<<0) /* Preset registers enable */
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
@@ -445,7 +450,7 @@ static irqreturn_t imx_int(int irq, void *dev_id)
readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
imx_txint(irq, dev_id);
- if (sts & USR1_RTSS)
+ if (sts & USR1_RTSD)
imx_rtsint(irq, dev_id);
return IRQ_HANDLED;
@@ -598,6 +603,12 @@ static int imx_startup(struct uart_port *port)
temp |= (UCR2_RXEN | UCR2_TXEN);
writel(temp, sport->port.membase + UCR2);
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+ temp = readl(sport->port.membase + UCR3);
+ temp |= UCR3_RXDMUXSEL;
+ writel(temp, sport->port.membase + UCR3);
+#endif
+
/*
* Enable modem status interrupts
*/
@@ -1133,13 +1144,19 @@ static int serial_imx_probe(struct platform_device *pdev)
if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
sport->have_rtscts = 1;
- if (pdata->init)
- pdata->init(pdev);
+ if (pdata->init) {
+ ret = pdata->init(pdev);
+ if (ret)
+ goto clkput;
+ }
uart_add_one_port(&imx_reg, &sport->port);
platform_set_drvdata(pdev, &sport->port);
return 0;
+clkput:
+ clk_put(sport->clk);
+ clk_disable(sport->clk);
unmap:
iounmap(sport->port.membase);
free:
diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
deleted file mode 100644
index fbe3835f6b7..00000000000
--- a/drivers/serial/mcfserial.c
+++ /dev/null
@@ -1,1965 +0,0 @@
-#warning This driver is deprecated. Check Kconfig for details.
-/*
- * mcfserial.c -- serial driver for ColdFire internal UARTS.
- *
- * Copyright (C) 1999-2003 Greg Ungerer <gerg@snapgear.com>
- * Copyright (c) 2000-2001 Lineo, Inc. <www.lineo.com>
- * Copyright (C) 2001-2002 SnapGear Inc. <www.snapgear.com>
- *
- * Based on code from 68332serial.c which was:
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1998 TSHG
- * Copyright (c) 1999 Rt-Control Inc. <jeff@uclinux.org>
- *
- * Changes:
- * 08/07/2003 Daniele Bellucci <bellucda@tiscali.it>
- * some cleanups in mcfrs_write.
- *
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/delay.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-#include <asm/nettel.h>
-#include <asm/uaccess.h>
-#include "mcfserial.h"
-
-struct timer_list mcfrs_timer_struct;
-
-/*
- * Default console baud rate, we use this as the default
- * for all ports so init can just open /dev/console and
- * keep going. Perhaps one day the cflag settings for the
- * console can be used instead.
- */
-#if defined(CONFIG_HW_FEITH)
-#define CONSOLE_BAUD_RATE 38400
-#define DEFAULT_CBAUD B38400
-#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \
- defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO)
-#define CONSOLE_BAUD_RATE 115200
-#define DEFAULT_CBAUD B115200
-#elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
- defined(CONFIG_senTec) || defined(CONFIG_SNEHA) || defined(CONFIG_AVNET)
-#define CONSOLE_BAUD_RATE 19200
-#define DEFAULT_CBAUD B19200
-#endif
-
-#ifndef CONSOLE_BAUD_RATE
-#define CONSOLE_BAUD_RATE 9600
-#define DEFAULT_CBAUD B9600
-#endif
-
-int mcfrs_console_inited = 0;
-int mcfrs_console_port = -1;
-int mcfrs_console_baud = CONSOLE_BAUD_RATE;
-int mcfrs_console_cbaud = DEFAULT_CBAUD;
-
-/*
- * Driver data structures.
- */
-static struct tty_driver *mcfrs_serial_driver;
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-/* Debugging...
- */
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x)
-#define IRQBASE (MCFINT_VECBASE+MCFINT_UART0)
-#else
-#define IRQBASE 73
-#endif
-
-/*
- * Configuration table, UARTs to look for at startup.
- */
-static struct mcf_serial mcfrs_table[] = {
- { /* ttyS0 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE1),
- .irq = IRQBASE,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#ifdef MCFUART_BASE2
- { /* ttyS1 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2),
- .irq = IRQBASE+1,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#endif
-#ifdef MCFUART_BASE3
- { /* ttyS2 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3),
- .irq = IRQBASE+2,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#endif
-#ifdef MCFUART_BASE4
- { /* ttyS3 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4),
- .irq = IRQBASE+3,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#endif
-};
-
-
-#define NR_PORTS (sizeof(mcfrs_table) / sizeof(struct mcf_serial))
-
-/*
- * This is used to figure out the divisor speeds and the timeouts.
- */
-static int mcfrs_baud_table[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0
-};
-#define MCFRS_BAUD_TABLE_SIZE \
- (sizeof(mcfrs_baud_table)/sizeof(mcfrs_baud_table[0]))
-
-
-#ifdef CONFIG_MAGIC_SYSRQ
-/*
- * Magic system request keys. Used for debugging...
- */
-extern int magic_sysrq_key(int ch);
-#endif
-
-
-/*
- * Forware declarations...
- */
-static void mcfrs_change_speed(struct mcf_serial *info);
-static void mcfrs_wait_until_sent(struct tty_struct *tty, int timeout);
-
-
-static inline int serial_paranoia_check(struct mcf_serial *info,
- char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
- static const char badmagic[] =
- "MCFRS(warning): bad magic number for serial struct %s in %s\n";
- static const char badinfo[] =
- "MCFRS(warning): null mcf_serial for %s in %s\n";
-
- if (!info) {
- printk(badinfo, name, routine);
- return 1;
- }
- if (info->magic != SERIAL_MAGIC) {
- printk(badmagic, name, routine);
- return 1;
- }
-#endif
- return 0;
-}
-
-/*
- * Sets or clears DTR and RTS on the requested line.
- */
-static void mcfrs_setsignals(struct mcf_serial *info, int dtr, int rts)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
-#if 0
- printk("%s(%d): mcfrs_setsignals(info=%x,dtr=%d,rts=%d)\n",
- __FILE__, __LINE__, info, dtr, rts);
-#endif
-
- local_irq_save(flags);
- if (dtr >= 0) {
-#ifdef MCFPP_DTR0
- if (info->line)
- mcf_setppdata(MCFPP_DTR1, (dtr ? 0 : MCFPP_DTR1));
- else
- mcf_setppdata(MCFPP_DTR0, (dtr ? 0 : MCFPP_DTR0));
-#endif
- }
- if (rts >= 0) {
- uartp = info->addr;
- if (rts) {
- info->sigs |= TIOCM_RTS;
- uartp[MCFUART_UOP1] = MCFUART_UOP_RTS;
- } else {
- info->sigs &= ~TIOCM_RTS;
- uartp[MCFUART_UOP0] = MCFUART_UOP_RTS;
- }
- }
- local_irq_restore(flags);
- return;
-}
-
-/*
- * Gets values of serial signals.
- */
-static int mcfrs_getsignals(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
- int sigs;
-#if defined(CONFIG_NETtel) && defined(CONFIG_M5307)
- unsigned short ppdata;
-#endif
-
-#if 0
- printk("%s(%d): mcfrs_getsignals(info=%x)\n", __FILE__, __LINE__);
-#endif
-
- local_irq_save(flags);
- uartp = info->addr;
- sigs = (uartp[MCFUART_UIPR] & MCFUART_UIPR_CTS) ? 0 : TIOCM_CTS;
- sigs |= (info->sigs & TIOCM_RTS);
-
-#ifdef MCFPP_DCD0
-{
- unsigned int ppdata;
- ppdata = mcf_getppdata();
- if (info->line == 0) {
- sigs |= (ppdata & MCFPP_DCD0) ? 0 : TIOCM_CD;
- sigs |= (ppdata & MCFPP_DTR0) ? 0 : TIOCM_DTR;
- } else if (info->line == 1) {
- sigs |= (ppdata & MCFPP_DCD1) ? 0 : TIOCM_CD;
- sigs |= (ppdata & MCFPP_DTR1) ? 0 : TIOCM_DTR;
- }
-}
-#endif
-
- local_irq_restore(flags);
- return(sigs);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_stop() and mcfrs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- * ------------------------------------------------------------
- */
-static void mcfrs_stop(struct tty_struct *tty)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_stop"))
- return;
-
- local_irq_save(flags);
- uartp = info->addr;
- info->imr &= ~MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- local_irq_restore(flags);
-}
-
-static void mcfrs_start(struct tty_struct *tty)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_start"))
- return;
-
- local_irq_save(flags);
- if (info->xmit_cnt && info->xmit_buf) {
- uartp = info->addr;
- info->imr |= MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- }
- local_irq_restore(flags);
-}
-
-/*
- * ----------------------------------------------------------------------
- *
- * Here starts the interrupt handling routines. All of the following
- * subroutines are declared as inline and are folded into
- * mcfrs_interrupt(). They were separated out for readability's sake.
- *
- * Note: mcfrs_interrupt() is a "fast" interrupt, which means that it
- * runs with interrupts turned off. People who may want to modify
- * mcfrs_interrupt() should try to keep the interrupt handler as fast as
- * possible. After you are done making modifications, it is not a bad
- * idea to do:
- *
- * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
- *
- * and look at the resulting assemble code in serial.s.
- *
- * - Ted Ts'o (tytso@mit.edu), 7-Mar-93
- * -----------------------------------------------------------------------
- */
-
-static inline void receive_chars(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
- struct tty_struct *tty = info->port.tty;
- unsigned char status, ch, flag;
-
- if (!tty)
- return;
-
- uartp = info->addr;
-
- while ((status = uartp[MCFUART_USR]) & MCFUART_USR_RXREADY) {
- ch = uartp[MCFUART_URB];
- info->stats.rx++;
-
-#ifdef CONFIG_MAGIC_SYSRQ
- if (mcfrs_console_inited && (info->line == mcfrs_console_port)) {
- if (magic_sysrq_key(ch))
- continue;
- }
-#endif
-
- flag = TTY_NORMAL;
- if (status & MCFUART_USR_RXERR) {
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR;
- if (status & MCFUART_USR_RXBREAK) {
- info->stats.rxbreak++;
- flag = TTY_BREAK;
- } else if (status & MCFUART_USR_RXPARITY) {
- info->stats.rxparity++;
- flag = TTY_PARITY;
- } else if (status & MCFUART_USR_RXOVERRUN) {
- info->stats.rxoverrun++;
- flag = TTY_OVERRUN;
- } else if (status & MCFUART_USR_RXFRAMING) {
- info->stats.rxframing++;
- flag = TTY_FRAME;
- }
- }
- tty_insert_flip_char(tty, ch, flag);
- }
- tty_schedule_flip(tty);
- return;
-}
-
-static inline void transmit_chars(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
-
- uartp = info->addr;
-
- if (info->x_char) {
- /* Send special char - probably flow control */
- uartp[MCFUART_UTB] = info->x_char;
- info->x_char = 0;
- info->stats.tx++;
- }
-
- if ((info->xmit_cnt <= 0) || info->port.tty->stopped) {
- info->imr &= ~MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- return;
- }
-
- while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) {
- uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++];
- info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
- info->stats.tx++;
- if (--info->xmit_cnt <= 0)
- break;
- }
-
- if (info->xmit_cnt < WAKEUP_CHARS)
- schedule_work(&info->tqueue);
- return;
-}
-
-/*
- * This is the serial driver's generic interrupt routine
- */
-irqreturn_t mcfrs_interrupt(int irq, void *dev_id)
-{
- struct mcf_serial *info;
- unsigned char isr;
-
- info = &mcfrs_table[(irq - IRQBASE)];
- isr = info->addr[MCFUART_UISR] & info->imr;
-
- if (isr & MCFUART_UIR_RXREADY)
- receive_chars(info);
- if (isr & MCFUART_UIR_TXREADY)
- transmit_chars(info);
- return IRQ_HANDLED;
-}
-
-/*
- * -------------------------------------------------------------------
- * Here ends the serial interrupt routines.
- * -------------------------------------------------------------------
- */
-
-static void mcfrs_offintr(struct work_struct *work)
-{
- struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue);
- struct tty_struct *tty = info->port.tty;
-
- if (tty)
- tty_wakeup(tty);
-}
-
-
-/*
- * Change of state on a DCD line.
- */
-void mcfrs_modem_change(struct mcf_serial *info, int dcd)
-{
- if (info->count == 0)
- return;
-
- if (info->flags & ASYNC_CHECK_CD) {
- if (dcd)
- wake_up_interruptible(&info->open_wait);
- else
- schedule_work(&info->tqueue_hangup);
- }
-}
-
-
-#ifdef MCFPP_DCD0
-
-unsigned short mcfrs_ppstatus;
-
-/*
- * This subroutine is called when the RS_TIMER goes off. It is used
- * to monitor the state of the DCD lines - since they have no edge
- * sensors and interrupt generators.
- */
-static void mcfrs_timer(void)
-{
- unsigned int ppstatus, dcdval, i;
-
- ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
-
- if (ppstatus != mcfrs_ppstatus) {
- for (i = 0; (i < 2); i++) {
- dcdval = (i ? MCFPP_DCD1 : MCFPP_DCD0);
- if ((ppstatus & dcdval) != (mcfrs_ppstatus & dcdval)) {
- mcfrs_modem_change(&mcfrs_table[i],
- ((ppstatus & dcdval) ? 0 : 1));
- }
- }
- }
- mcfrs_ppstatus = ppstatus;
-
- /* Re-arm timer */
- mcfrs_timer_struct.expires = jiffies + HZ/25;
- add_timer(&mcfrs_timer_struct);
-}
-
-#endif /* MCFPP_DCD0 */
-
-
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred. The path of
- * hangup processing is:
- *
- * serial interrupt routine -> (scheduler tqueue) ->
- * do_serial_hangup() -> tty->hangup() -> mcfrs_hangup()
- *
- */
-static void do_serial_hangup(struct work_struct *work)
-{
- struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue_hangup);
- struct tty_struct *tty = info->port.tty;
-
- if (tty)
- tty_hangup(tty);
-}
-
-static int startup(struct mcf_serial * info)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
- if (info->flags & ASYNC_INITIALIZED)
- return 0;
-
- if (!info->xmit_buf) {
- info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL);
- if (!info->xmit_buf)
- return -ENOMEM;
- }
-
- local_irq_save(flags);
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("starting up ttyS%d (irq %d)...\n", info->line, info->irq);
-#endif
-
- /*
- * Reset UART, get it into known state...
- */
- uartp = info->addr;
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- mcfrs_setsignals(info, 1, 1);
-
- if (info->port.tty)
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
- /*
- * and set the speed of the serial port
- */
- mcfrs_change_speed(info);
-
- /*
- * Lastly enable the UART transmitter and receiver, and
- * interrupt enables.
- */
- info->imr = MCFUART_UIR_RXREADY;
- uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
- uartp[MCFUART_UIMR] = info->imr;
-
- info->flags |= ASYNC_INITIALIZED;
- local_irq_restore(flags);
- return 0;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct mcf_serial * info)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
- if (!(info->flags & ASYNC_INITIALIZED))
- return;
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("Shutting down serial port %d (irq %d)....\n", info->line,
- info->irq);
-#endif
-
- local_irq_save(flags);
-
- uartp = info->addr;
- uartp[MCFUART_UIMR] = 0; /* mask all interrupts */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
-
- if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
- mcfrs_setsignals(info, 0, 0);
-
- if (info->xmit_buf) {
- free_page((unsigned long) info->xmit_buf);
- info->xmit_buf = 0;
- }
-
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
- info->flags &= ~ASYNC_INITIALIZED;
- local_irq_restore(flags);
-}
-
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void mcfrs_change_speed(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
- unsigned int baudclk, cflag;
- unsigned long flags;
- unsigned char mr1, mr2;
- int i;
-#ifdef CONFIG_M5272
- unsigned int fraction;
-#endif
-
- if (!info->port.tty || !info->port.tty->termios)
- return;
- cflag = info->port.tty->termios->c_cflag;
- if (info->addr == 0)
- return;
-
-#if 0
- printk("%s(%d): mcfrs_change_speed()\n", __FILE__, __LINE__);
-#endif
-
- i = cflag & CBAUD;
- if (i & CBAUDEX) {
- i &= ~CBAUDEX;
- if (i < 1 || i > 4)
- info->port.tty->termios->c_cflag &= ~CBAUDEX;
- else
- i += 15;
- }
- if (i == 0) {
- mcfrs_setsignals(info, 0, -1);
- return;
- }
-
- /* compute the baudrate clock */
-#ifdef CONFIG_M5272
- /*
- * For the MCF5272, also compute the baudrate fraction.
- */
- baudclk = (MCF_BUSCLK / mcfrs_baud_table[i]) / 32;
- fraction = MCF_BUSCLK - (baudclk * 32 * mcfrs_baud_table[i]);
- fraction *= 16;
- fraction /= (32 * mcfrs_baud_table[i]);
-#else
- baudclk = ((MCF_BUSCLK / mcfrs_baud_table[i]) + 16) / 32;
-#endif
-
- info->baud = mcfrs_baud_table[i];
-
- mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
- mr2 = 0;
-
- switch (cflag & CSIZE) {
- case CS5: mr1 |= MCFUART_MR1_CS5; break;
- case CS6: mr1 |= MCFUART_MR1_CS6; break;
- case CS7: mr1 |= MCFUART_MR1_CS7; break;
- case CS8:
- default: mr1 |= MCFUART_MR1_CS8; break;
- }
-
- if (cflag & PARENB) {
- if (cflag & CMSPAR) {
- if (cflag & PARODD)
- mr1 |= MCFUART_MR1_PARITYMARK;
- else
- mr1 |= MCFUART_MR1_PARITYSPACE;
- } else {
- if (cflag & PARODD)
- mr1 |= MCFUART_MR1_PARITYODD;
- else
- mr1 |= MCFUART_MR1_PARITYEVEN;
- }
- } else {
- mr1 |= MCFUART_MR1_PARITYNONE;
- }
-
- if (cflag & CSTOPB)
- mr2 |= MCFUART_MR2_STOP2;
- else
- mr2 |= MCFUART_MR2_STOP1;
-
- if (cflag & CRTSCTS) {
- mr1 |= MCFUART_MR1_RXRTS;
- mr2 |= MCFUART_MR2_TXCTS;
- }
-
- if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
- else
- info->flags |= ASYNC_CHECK_CD;
-
- uartp = info->addr;
-
- local_irq_save(flags);
-#if 0
- printk("%s(%d): mr1=%x mr2=%x baudclk=%x\n", __FILE__, __LINE__,
- mr1, mr2, baudclk);
-#endif
- /*
- Note: pg 12-16 of MCF5206e User's Manual states that a
- software reset should be performed prior to changing
- UMR1,2, UCSR, UACR, bit 7
- */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
- uartp[MCFUART_UMR] = mr1;
- uartp[MCFUART_UMR] = mr2;
- uartp[MCFUART_UBG1] = (baudclk & 0xff00) >> 8; /* set msb byte */
- uartp[MCFUART_UBG2] = (baudclk & 0xff); /* set lsb byte */
-#ifdef CONFIG_M5272
- uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */
-#endif
- uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
- uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
- mcfrs_setsignals(info, 1, -1);
- local_irq_restore(flags);
- return;
-}
-
-static void mcfrs_flush_chars(struct tty_struct *tty)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_flush_chars"))
- return;
-
- uartp = (volatile unsigned char *) info->addr;
-
- /*
- * re-enable receiver interrupt
- */
- local_irq_save(flags);
- if ((!(info->imr & MCFUART_UIR_RXREADY)) &&
- (info->flags & ASYNC_INITIALIZED) ) {
- info->imr |= MCFUART_UIR_RXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- }
- local_irq_restore(flags);
-
- if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !info->xmit_buf)
- return;
-
- /* Enable transmitter */
- local_irq_save(flags);
- info->imr |= MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- local_irq_restore(flags);
-}
-
-static int mcfrs_write(struct tty_struct * tty,
- const unsigned char *buf, int count)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
- int c, total = 0;
-
-#if 0
- printk("%s(%d): mcfrs_write(tty=%x,buf=%x,count=%d)\n",
- __FILE__, __LINE__, (int)tty, (int)buf, count);
-#endif
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_write"))
- return 0;
-
- if (!tty || !info->xmit_buf)
- return 0;
-
- local_save_flags(flags);
- while (1) {
- local_irq_disable();
- c = min(count, (int) min(((int)SERIAL_XMIT_SIZE) - info->xmit_cnt - 1,
- ((int)SERIAL_XMIT_SIZE) - info->xmit_head));
- local_irq_restore(flags);
-
- if (c <= 0)
- break;
-
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
-
- local_irq_disable();
- info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt += c;
- local_irq_restore(flags);
-
- buf += c;
- count -= c;
- total += c;
- }
-
- local_irq_disable();
- uartp = info->addr;
- info->imr |= MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- local_irq_restore(flags);
-
- return total;
-}
-
-static int mcfrs_write_room(struct tty_struct *tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- int ret;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_write_room"))
- return 0;
- ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
- return ret;
-}
-
-static int mcfrs_chars_in_buffer(struct tty_struct *tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_chars_in_buffer"))
- return 0;
- return info->xmit_cnt;
-}
-
-static void mcfrs_flush_buffer(struct tty_struct *tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_flush_buffer"))
- return;
-
- local_irq_save(flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- local_irq_restore(flags);
-
- tty_wakeup(tty);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_throttle()
- *
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void mcfrs_throttle(struct tty_struct * tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("throttle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
-#endif
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_throttle"))
- return;
-
- if (I_IXOFF(tty))
- info->x_char = STOP_CHAR(tty);
-
- /* Turn off RTS line (do this atomic) */
-}
-
-static void mcfrs_unthrottle(struct tty_struct * tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("unthrottle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
-#endif
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_unthrottle"))
- return;
-
- if (I_IXOFF(tty)) {
- if (info->x_char)
- info->x_char = 0;
- else
- info->x_char = START_CHAR(tty);
- }
-
- /* Assert RTS line (do this atomic) */
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-static int get_serial_info(struct mcf_serial * info,
- struct serial_struct * retinfo)
-{
- struct serial_struct tmp;
-
- if (!retinfo)
- return -EFAULT;
- memset(&tmp, 0, sizeof(tmp));
- tmp.type = info->type;
- tmp.line = info->line;
- tmp.port = (unsigned int) info->addr;
- tmp.irq = info->irq;
- tmp.flags = info->flags;
- tmp.baud_base = info->baud_base;
- tmp.close_delay = info->close_delay;
- tmp.closing_wait = info->closing_wait;
- tmp.custom_divisor = info->custom_divisor;
- return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0;
-}
-
-static int set_serial_info(struct mcf_serial * info,
- struct serial_struct * new_info)
-{
- struct serial_struct new_serial;
- struct mcf_serial old_info;
- int retval = 0;
-
- if (!new_info)
- return -EFAULT;
- if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
- return -EFAULT;
- old_info = *info;
-
- if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.baud_base != info->baud_base) ||
- (new_serial.type != info->type) ||
- (new_serial.close_delay != info->close_delay) ||
- ((new_serial.flags & ~ASYNC_USR_MASK) !=
- (info->flags & ~ASYNC_USR_MASK)))
- return -EPERM;
- info->flags = ((info->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- info->custom_divisor = new_serial.custom_divisor;
- goto check_and_exit;
- }
-
- if (info->count > 1)
- return -EBUSY;
-
- /*
- * OK, past this point, all the error checking has been done.
- * At this point, we start making changes.....
- */
-
- info->baud_base = new_serial.baud_base;
- info->flags = ((info->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- info->type = new_serial.type;
- info->close_delay = new_serial.close_delay;
- info->closing_wait = new_serial.closing_wait;
-
-check_and_exit:
- retval = startup(info);
- return retval;
-}
-
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * is emptied. On bus types like RS485, the transmitter must
- * release the bus after transmitting. This must be done when
- * the transmit shift register is empty, not be done when the
- * transmit holding register is empty. This functionality
- * allows an RS485 driver to be written in user space.
- */
-static int get_lsr_info(struct mcf_serial * info, unsigned int *value)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
- unsigned char status;
-
- local_irq_save(flags);
- uartp = info->addr;
- status = (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY) ? TIOCSER_TEMT : 0;
- local_irq_restore(flags);
-
- return put_user(status,value);
-}
-
-/*
- * This routine sends a break character out the serial port.
- */
-static void send_break( struct mcf_serial * info, int duration)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
- if (!info->addr)
- return;
- set_current_state(TASK_INTERRUPTIBLE);
- uartp = info->addr;
-
- local_irq_save(flags);
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTART;
- schedule_timeout(duration);
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTOP;
- local_irq_restore(flags);
-}
-
-static int mcfrs_tiocmget(struct tty_struct *tty, struct file *file)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
- return -ENODEV;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- return mcfrs_getsignals(info);
-}
-
-static int mcfrs_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
- int rts = -1, dtr = -1;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
- return -ENODEV;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- if (set & TIOCM_RTS)
- rts = 1;
- if (set & TIOCM_DTR)
- dtr = 1;
- if (clear & TIOCM_RTS)
- rts = 0;
- if (clear & TIOCM_DTR)
- dtr = 0;
-
- mcfrs_setsignals(info, dtr, rts);
-
- return 0;
-}
-
-static int mcfrs_ioctl(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
- int retval, error;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
- return -ENODEV;
-
- if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
- (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
- }
-
- switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- if (!arg)
- send_break(info, HZ/4); /* 1/4 second */
- return 0;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- send_break(info, arg ? arg*(HZ/10) : HZ/4);
- return 0;
- case TIOCGSERIAL:
- if (access_ok(VERIFY_WRITE, (void *) arg,
- sizeof(struct serial_struct)))
- return get_serial_info(info,
- (struct serial_struct *) arg);
- return -EFAULT;
- case TIOCSSERIAL:
- return set_serial_info(info,
- (struct serial_struct *) arg);
- case TIOCSERGETLSR: /* Get line status register */
- if (access_ok(VERIFY_WRITE, (void *) arg,
- sizeof(unsigned int)))
- return get_lsr_info(info, (unsigned int *) arg);
- return -EFAULT;
- case TIOCSERGSTRUCT:
- error = copy_to_user((struct mcf_serial *) arg,
- info, sizeof(struct mcf_serial));
- if (error)
- return -EFAULT;
- return 0;
-
-#ifdef TIOCSET422
- case TIOCSET422: {
- unsigned int val;
- get_user(val, (unsigned int *) arg);
- mcf_setpa(MCFPP_PA11, (val ? 0 : MCFPP_PA11));
- break;
- }
- case TIOCGET422: {
- unsigned int val;
- val = (mcf_getpa() & MCFPP_PA11) ? 0 : 1;
- put_user(val, (unsigned int *) arg);
- break;
- }
-#endif
-
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-
- if (tty->termios->c_cflag == old_termios->c_cflag)
- return;
-
- mcfrs_change_speed(info);
-
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
- mcfrs_setsignals(info, -1, 1);
-#if 0
- mcfrs_start(tty);
-#endif
- }
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_close()
- *
- * This routine is called when the serial port gets closed. First, we
- * wait for the last remaining data to be sent. Then, we unlink its
- * S structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
-static void mcfrs_close(struct tty_struct *tty, struct file * filp)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (!info || serial_paranoia_check(info, tty->name, "mcfrs_close"))
- return;
-
- local_irq_save(flags);
-
- if (tty_hung_up_p(filp)) {
- local_irq_restore(flags);
- return;
- }
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_close ttyS%d, count = %d\n", info->line, info->count);
-#endif
- if ((tty->count == 1) && (info->count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk("MCFRS: bad serial port count; tty->count is 1, "
- "info->count is %d\n", info->count);
- info->count = 1;
- }
- if (--info->count < 0) {
- printk("MCFRS: bad serial port count for ttyS%d: %d\n",
- info->line, info->count);
- info->count = 0;
- }
- if (info->count) {
- local_irq_restore(flags);
- return;
- }
- info->flags |= ASYNC_CLOSING;
-
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, info->closing_wait);
-
- /*
- * At this point we stop accepting input. To do this, we
- * disable the receive line status interrupts, and tell the
- * interrupt driver to stop checking the data ready bit in the
- * line status register.
- */
- info->imr &= ~MCFUART_UIR_RXREADY;
- uartp = info->addr;
- uartp[MCFUART_UIMR] = info->imr;
-
-#if 0
- /* FIXME: do we need to keep this enabled for console?? */
- if (mcfrs_console_inited && (mcfrs_console_port == info->line)) {
- /* Do not disable the UART */ ;
- } else
-#endif
- shutdown(info);
- mcfrs_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
- tty->closing = 0;
- info->event = 0;
- info->port.tty = NULL;
-#if 0
- if (tty->ldisc.num != ldiscs[N_TTY].num) {
- if (tty->ldisc.close)
- (tty->ldisc.close)(tty);
- tty->ldisc = ldiscs[N_TTY];
- tty->termios->c_line = N_TTY;
- if (tty->ldisc.open)
- (tty->ldisc.open)(tty);
- }
-#endif
- if (info->blocked_open) {
- if (info->close_delay) {
- msleep_interruptible(jiffies_to_msecs(info->close_delay));
- }
- wake_up_interruptible(&info->open_wait);
- }
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
- local_irq_restore(flags);
-}
-
-/*
- * mcfrs_wait_until_sent() --- wait until the transmitter is empty
- */
-static void
-mcfrs_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-#ifdef CONFIG_M5272
-#define MCF5272_FIFO_SIZE 25 /* fifo size + shift reg */
-
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
- volatile unsigned char *uartp;
- unsigned long orig_jiffies, fifo_time, char_time, fifo_cnt;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_wait_until_sent"))
- return;
-
- orig_jiffies = jiffies;
-
- /*
- * Set the check interval to be 1/5 of the approximate time
- * to send the entire fifo, and make it at least 1. The check
- * interval should also be less than the timeout.
- *
- * Note: we have to use pretty tight timings here to satisfy
- * the NIST-PCTS.
- */
- lock_kernel();
-
- fifo_time = (MCF5272_FIFO_SIZE * HZ * 10) / info->baud;
- char_time = fifo_time / 5;
- if (char_time == 0)
- char_time = 1;
- if (timeout && timeout < char_time)
- char_time = timeout;
-
- /*
- * Clamp the timeout period at 2 * the time to empty the
- * fifo. Just to be safe, set the minimum at .5 seconds.
- */
- fifo_time *= 2;
- if (fifo_time < (HZ/2))
- fifo_time = HZ/2;
- if (!timeout || timeout > fifo_time)
- timeout = fifo_time;
-
- /*
- * Account for the number of bytes in the UART
- * transmitter FIFO plus any byte being shifted out.
- */
- uartp = (volatile unsigned char *) info->addr;
- for (;;) {
- fifo_cnt = (uartp[MCFUART_UTF] & MCFUART_UTF_TXB);
- if ((uartp[MCFUART_USR] & (MCFUART_USR_TXREADY|
- MCFUART_USR_TXEMPTY)) ==
- MCFUART_USR_TXREADY)
- fifo_cnt++;
- if (fifo_cnt == 0)
- break;
- msleep_interruptible(jiffies_to_msecs(char_time));
- if (signal_pending(current))
- break;
- if (timeout && time_after(jiffies, orig_jiffies + timeout))
- break;
- }
- unlock_kernel();
-#else
- /*
- * For the other coldfire models, assume all data has been sent
- */
-#endif
-}
-
-/*
- * mcfrs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-void mcfrs_hangup(struct tty_struct *tty)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_hangup"))
- return;
-
- mcfrs_flush_buffer(tty);
- shutdown(info);
- info->event = 0;
- info->count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->port.tty = NULL;
- wake_up_interruptible(&info->open_wait);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
- struct mcf_serial *info)
-{
- DECLARE_WAITQUEUE(wait, current);
- int retval;
- int do_clocal = 0;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (info->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
-#else
- return -EAGAIN;
-#endif
- }
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * mcfrs_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&info->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready before block: ttyS%d, count = %d\n",
- info->line, info->count);
-#endif
- info->count--;
- info->blocked_open++;
- while (1) {
- local_irq_disable();
- mcfrs_setsignals(info, 1, 1);
- local_irq_enable();
- current->state = TASK_INTERRUPTIBLE;
- if (tty_hung_up_p(filp) ||
- !(info->flags & ASYNC_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
-#else
- retval = -EAGAIN;
-#endif
- break;
- }
- if (!(info->flags & ASYNC_CLOSING) &&
- (do_clocal || (mcfrs_getsignals(info) & TIOCM_CD)))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready blocking: ttyS%d, count = %d\n",
- info->line, info->count);
-#endif
- schedule();
- }
- current->state = TASK_RUNNING;
- remove_wait_queue(&info->open_wait, &wait);
- if (!tty_hung_up_p(filp))
- info->count++;
- info->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready after blocking: ttyS%d, count = %d\n",
- info->line, info->count);
-#endif
- if (retval)
- return retval;
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
-}
-
-/*
- * This routine is called whenever a serial port is opened. It
- * enables interrupts for a serial port, linking in its structure into
- * the IRQ chain. It also performs the serial-specific
- * initialization for the tty structure.
- */
-int mcfrs_open(struct tty_struct *tty, struct file * filp)
-{
- struct mcf_serial *info;
- int retval, line;
-
- line = tty->index;
- if ((line < 0) || (line >= NR_PORTS))
- return -ENODEV;
- info = mcfrs_table + line;
- if (serial_paranoia_check(info, tty->name, "mcfrs_open"))
- return -ENODEV;
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_open %s, count = %d\n", tty->name, info->count);
-#endif
- info->count++;
- tty->driver_data = info;
- info->port.tty = tty;
-
- /*
- * Start up serial port
- */
- retval = startup(info);
- if (retval)
- return retval;
-
- retval = block_til_ready(tty, filp, info);
- if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_open returning after block_til_ready with %d\n",
- retval);
-#endif
- return retval;
- }
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_open %s successful...\n", tty->name);
-#endif
- return 0;
-}
-
-/*
- * Based on the line number set up the internal interrupt stuff.
- */
-static void mcfrs_irqinit(struct mcf_serial *info)
-{
-#if defined(CONFIG_M5272)
- volatile unsigned long *icrp;
- volatile unsigned long *portp;
- volatile unsigned char *uartp;
-
- uartp = info->addr;
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR2);
-
- switch (info->line) {
- case 0:
- *icrp = 0xe0000000;
- break;
- case 1:
- *icrp = 0x0e000000;
- break;
- default:
- printk("MCFRS: don't know how to handle UART %d interrupt?\n",
- info->line);
- return;
- }
-
- /* Enable the output lines for the serial ports */
- portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PBCNT);
- *portp = (*portp & ~0x000000ff) | 0x00000055;
- portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PDCNT);
- *portp = (*portp & ~0x000003fc) | 0x000002a8;
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
- volatile unsigned char *icrp, *uartp;
- volatile unsigned long *imrp;
-
- uartp = info->addr;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_ICR0 + MCFINT_UART0 + info->line);
- *icrp = 0x30 + info->line; /* level 6, line based priority */
-
- imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_IMRL);
- *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
-#if defined(CONFIG_M527x)
- {
- /*
- * External Pin Mask Setting & Enable External Pin for Interface
- * mrcbis@aliceposta.it
- */
- u16 *serpin_enable_mask;
- serpin_enable_mask = (u16 *) (MCF_IPSBAR + MCF_GPIO_PAR_UART);
- if (info->line == 0)
- *serpin_enable_mask |= UART0_ENABLE_MASK;
- else if (info->line == 1)
- *serpin_enable_mask |= UART1_ENABLE_MASK;
- else if (info->line == 2)
- *serpin_enable_mask |= UART2_ENABLE_MASK;
- }
-#endif
-#if defined(CONFIG_M528x)
- /* make sure PUAPAR is set for UART0 and UART1 */
- if (info->line < 2) {
- volatile unsigned char *portp = (volatile unsigned char *) (MCF_MBAR + MCF5282_GPIO_PUAPAR);
- *portp |= (0x03 << (info->line * 2));
- }
-#endif
-#elif defined(CONFIG_M520x)
- volatile unsigned char *icrp, *uartp;
- volatile unsigned long *imrp;
-
- uartp = info->addr;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_ICR0 + MCFINT_UART0 + info->line);
- *icrp = 0x03;
-
- imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_IMRL);
- *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
- if (info->line < 2) {
- unsigned short *uart_par;
- uart_par = (unsigned short *)(MCF_IPSBAR + MCF_GPIO_PAR_UART);
- if (info->line == 0)
- *uart_par |= MCF_GPIO_PAR_UART_PAR_UTXD0
- | MCF_GPIO_PAR_UART_PAR_URXD0;
- else if (info->line == 1)
- *uart_par |= MCF_GPIO_PAR_UART_PAR_UTXD1
- | MCF_GPIO_PAR_UART_PAR_URXD1;
- } else if (info->line == 2) {
- unsigned char *feci2c_par;
- feci2c_par = (unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
- *feci2c_par &= ~0x0F;
- *feci2c_par |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2
- | MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
- }
-#elif defined(CONFIG_M532x)
- volatile unsigned char *uartp;
- uartp = info->addr;
- switch (info->line) {
- case 0:
- MCF_INTC0_ICR26 = 0x3;
- MCF_INTC0_CIMR = 26;
- /* GPIO initialization */
- MCF_GPIO_PAR_UART |= 0x000F;
- break;
- case 1:
- MCF_INTC0_ICR27 = 0x3;
- MCF_INTC0_CIMR = 27;
- /* GPIO initialization */
- MCF_GPIO_PAR_UART |= 0x0FF0;
- break;
- case 2:
- MCF_INTC0_ICR28 = 0x3;
- MCF_INTC0_CIMR = 28;
- /* GPIOs also must be initalized, depends on board */
- break;
- }
-#else
- volatile unsigned char *icrp, *uartp;
-
- switch (info->line) {
- case 0:
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART1ICR);
- *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
- MCFSIM_ICR_PRI1;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
- break;
- case 1:
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART2ICR);
- *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
- MCFSIM_ICR_PRI2;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
- break;
- default:
- printk("MCFRS: don't know how to handle UART %d interrupt?\n",
- info->line);
- return;
- }
-
- uartp = info->addr;
- uartp[MCFUART_UIVR] = info->irq;
-#endif
-
- /* Clear mask, so no surprise interrupts. */
- uartp[MCFUART_UIMR] = 0;
-
- if (request_irq(info->irq, mcfrs_interrupt, IRQF_DISABLED,
- "ColdFire UART", NULL)) {
- printk("MCFRS: Unable to attach ColdFire UART %d interrupt "
- "vector=%d\n", info->line, info->irq);
- }
-
- return;
-}
-
-
-char *mcfrs_drivername = "ColdFire internal UART serial driver version 1.00\n";
-
-
-/*
- * Serial stats reporting...
- */
-int mcfrs_readproc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
-{
- struct mcf_serial *info;
- char str[20];
- int len, sigs, i;
-
- len = sprintf(page, mcfrs_drivername);
- for (i = 0; (i < NR_PORTS); i++) {
- info = &mcfrs_table[i];
- len += sprintf((page + len), "%d: port:%x irq=%d baud:%d ",
- i, (unsigned int) info->addr, info->irq, info->baud);
- if (info->stats.rx || info->stats.tx)
- len += sprintf((page + len), "tx:%d rx:%d ",
- info->stats.tx, info->stats.rx);
- if (info->stats.rxframing)
- len += sprintf((page + len), "fe:%d ",
- info->stats.rxframing);
- if (info->stats.rxparity)
- len += sprintf((page + len), "pe:%d ",
- info->stats.rxparity);
- if (info->stats.rxbreak)
- len += sprintf((page + len), "brk:%d ",
- info->stats.rxbreak);
- if (info->stats.rxoverrun)
- len += sprintf((page + len), "oe:%d ",
- info->stats.rxoverrun);
-
- str[0] = str[1] = 0;
- if ((sigs = mcfrs_getsignals(info))) {
- if (sigs & TIOCM_RTS)
- strcat(str, "|RTS");
- if (sigs & TIOCM_CTS)
- strcat(str, "|CTS");
- if (sigs & TIOCM_DTR)
- strcat(str, "|DTR");
- if (sigs & TIOCM_CD)
- strcat(str, "|CD");
- }
-
- len += sprintf((page + len), "%s\n", &str[1]);
- }
-
- return(len);
-}
-
-
-/* Finally, routines used to initialize the serial driver. */
-
-static void show_serial_version(void)
-{
- printk(mcfrs_drivername);
-}
-
-static const struct tty_operations mcfrs_ops = {
- .open = mcfrs_open,
- .close = mcfrs_close,
- .write = mcfrs_write,
- .flush_chars = mcfrs_flush_chars,
- .write_room = mcfrs_write_room,
- .chars_in_buffer = mcfrs_chars_in_buffer,
- .flush_buffer = mcfrs_flush_buffer,
- .ioctl = mcfrs_ioctl,
- .throttle = mcfrs_throttle,
- .unthrottle = mcfrs_unthrottle,
- .set_termios = mcfrs_set_termios,
- .stop = mcfrs_stop,
- .start = mcfrs_start,
- .hangup = mcfrs_hangup,
- .read_proc = mcfrs_readproc,
- .wait_until_sent = mcfrs_wait_until_sent,
- .tiocmget = mcfrs_tiocmget,
- .tiocmset = mcfrs_tiocmset,
-};
-
-/* mcfrs_init inits the driver */
-static int __init
-mcfrs_init(void)
-{
- struct mcf_serial *info;
- unsigned long flags;
- int i;
-
- /* Setup base handler, and timer table. */
-#ifdef MCFPP_DCD0
- init_timer(&mcfrs_timer_struct);
- mcfrs_timer_struct.function = mcfrs_timer;
- mcfrs_timer_struct.data = 0;
- mcfrs_timer_struct.expires = jiffies + HZ/25;
- add_timer(&mcfrs_timer_struct);
- mcfrs_ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
-#endif
- mcfrs_serial_driver = alloc_tty_driver(NR_PORTS);
- if (!mcfrs_serial_driver)
- return -ENOMEM;
-
- show_serial_version();
-
- /* Initialize the tty_driver structure */
- mcfrs_serial_driver->owner = THIS_MODULE;
- mcfrs_serial_driver->name = "ttyS";
- mcfrs_serial_driver->driver_name = "mcfserial";
- mcfrs_serial_driver->major = TTY_MAJOR;
- mcfrs_serial_driver->minor_start = 64;
- mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- mcfrs_serial_driver->subtype = SERIAL_TYPE_NORMAL;
- mcfrs_serial_driver->init_termios = tty_std_termios;
-
- mcfrs_serial_driver->init_termios.c_cflag =
- mcfrs_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL;
- mcfrs_serial_driver->flags = TTY_DRIVER_REAL_RAW;
-
- tty_set_operations(mcfrs_serial_driver, &mcfrs_ops);
-
- if (tty_register_driver(mcfrs_serial_driver)) {
- printk("MCFRS: Couldn't register serial driver\n");
- put_tty_driver(mcfrs_serial_driver);
- return(-EBUSY);
- }
-
- local_irq_save(flags);
-
- /*
- * Configure all the attached serial ports.
- */
- for (i = 0, info = mcfrs_table; (i < NR_PORTS); i++, info++) {
- info->magic = SERIAL_MAGIC;
- info->line = i;
- info->port.tty = NULL;
- info->custom_divisor = 16;
- info->close_delay = 50;
- info->closing_wait = 3000;
- info->x_char = 0;
- info->event = 0;
- info->count = 0;
- info->blocked_open = 0;
- INIT_WORK(&info->tqueue, mcfrs_offintr);
- INIT_WORK(&info->tqueue_hangup, do_serial_hangup);
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
-
- info->imr = 0;
- mcfrs_setsignals(info, 0, 0);
- mcfrs_irqinit(info);
-
- printk("ttyS%d at 0x%04x (irq = %d)", info->line,
- (unsigned int) info->addr, info->irq);
- printk(" is a builtin ColdFire UART\n");
- }
-
- local_irq_restore(flags);
- return 0;
-}
-
-module_init(mcfrs_init);
-
-/****************************************************************************/
-/* Serial Console */
-/****************************************************************************/
-
-/*
- * Quick and dirty UART initialization, for console output.
- */
-
-void mcfrs_init_console(void)
-{
- volatile unsigned char *uartp;
- unsigned int clk;
-
- /*
- * Reset UART, get it into known state...
- */
- uartp = (volatile unsigned char *) (MCF_MBAR +
- (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
-
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
-
- /*
- * Set port for defined baud , 8 data bits, 1 stop bit, no parity.
- */
- uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
- uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
-
-#ifdef CONFIG_M5272
-{
- /*
- * For the MCF5272, also compute the baudrate fraction.
- */
- int fraction = MCF_BUSCLK - (clk * 32 * mcfrs_console_baud);
- fraction *= 16;
- fraction /= (32 * mcfrs_console_baud);
- uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */
- clk = (MCF_BUSCLK / mcfrs_console_baud) / 32;
-}
-#else
- clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */
-#endif
-
- uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8; /* set msb baud */
- uartp[MCFUART_UBG2] = (clk & 0xff); /* set lsb baud */
- uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
- uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
-
- mcfrs_console_inited++;
- return;
-}
-
-
-/*
- * Setup for console. Argument comes from the boot command line.
- */
-
-int mcfrs_console_setup(struct console *cp, char *arg)
-{
- int i, n = CONSOLE_BAUD_RATE;
-
- if (!cp)
- return(-1);
-
- if (!strncmp(cp->name, "ttyS", 4))
- mcfrs_console_port = cp->index;
- else if (!strncmp(cp->name, "cua", 3))
- mcfrs_console_port = cp->index;
- else
- return(-1);
-
- if (arg)
- n = simple_strtoul(arg,NULL,0);
- for (i = 0; i < MCFRS_BAUD_TABLE_SIZE; i++)
- if (mcfrs_baud_table[i] == n)
- break;
- if (i < MCFRS_BAUD_TABLE_SIZE) {
- mcfrs_console_baud = n;
- mcfrs_console_cbaud = 0;
- if (i > 15) {
- mcfrs_console_cbaud |= CBAUDEX;
- i -= 15;
- }
- mcfrs_console_cbaud |= i;
- }
- mcfrs_init_console(); /* make sure baud rate changes */
- return(0);
-}
-
-
-static struct tty_driver *mcfrs_console_device(struct console *c, int *index)
-{
- *index = c->index;
- return mcfrs_serial_driver;
-}
-
-
-/*
- * Output a single character, using UART polled mode.
- * This is used for console output.
- */
-
-int mcfrs_put_char(char ch)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
- int i;
-
- uartp = (volatile unsigned char *) (MCF_MBAR +
- (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
-
- local_irq_save(flags);
- for (i = 0; (i < 0x10000); i++) {
- if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY)
- break;
- }
- if (i < 0x10000) {
- uartp[MCFUART_UTB] = ch;
- for (i = 0; (i < 0x10000); i++)
- if (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY)
- break;
- }
- if (i >= 0x10000)
- mcfrs_init_console(); /* try and get it back */
- local_irq_restore(flags);
-
- return 1;
-}
-
-
-/*
- * rs_console_write is registered for printk output.
- */
-
-void mcfrs_console_write(struct console *cp, const char *p, unsigned len)
-{
- if (!mcfrs_console_inited)
- mcfrs_init_console();
- while (len-- > 0) {
- if (*p == '\n')
- mcfrs_put_char('\r');
- mcfrs_put_char(*p++);
- }
-}
-
-/*
- * declare our consoles
- */
-
-struct console mcfrs_console = {
- .name = "ttyS",
- .write = mcfrs_console_write,
- .device = mcfrs_console_device,
- .setup = mcfrs_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int __init mcfrs_console_init(void)
-{
- register_console(&mcfrs_console);
- return 0;
-}
-
-console_initcall(mcfrs_console_init);
-
-/****************************************************************************/
diff --git a/drivers/serial/mcfserial.h b/drivers/serial/mcfserial.h
deleted file mode 100644
index 56420e2cb11..00000000000
--- a/drivers/serial/mcfserial.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * mcfserial.c -- serial driver for ColdFire internal UARTS.
- *
- * Copyright (c) 1999 Greg Ungerer <gerg@snapgear.com>
- * Copyright (c) 2000-2001 Lineo, Inc. <www.lineo.com>
- * Copyright (c) 2002 SnapGear Inc., <www.snapgear.com>
- *
- * Based on code from 68332serial.c which was:
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1998 TSHG
- * Copyright (c) 1999 Rt-Control Inc. <jeff@uclinux.org>
- */
-#ifndef _MCF_SERIAL_H
-#define _MCF_SERIAL_H
-
-#include <linux/serial.h>
-
-#ifdef __KERNEL__
-
-/*
- * Define a local serial stats structure.
- */
-
-struct mcf_stats {
- unsigned int rx;
- unsigned int tx;
- unsigned int rxbreak;
- unsigned int rxframing;
- unsigned int rxparity;
- unsigned int rxoverrun;
-};
-
-
-/*
- * This is our internal structure for each serial port's state.
- * Each serial port has one of these structures associated with it.
- */
-
-struct mcf_serial {
- int magic;
- volatile unsigned char *addr; /* UART memory address */
- int irq;
- int flags; /* defined in tty.h */
- int type; /* UART type */
- struct tty_struct *tty;
- unsigned char imr; /* Software imr register */
- unsigned int baud;
- int sigs;
- int custom_divisor;
- int x_char; /* xon/xoff character */
- int baud_base;
- int close_delay;
- unsigned short closing_wait;
- unsigned short closing_wait2;
- unsigned long event;
- int line;
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- struct mcf_stats stats;
- struct work_struct tqueue;
- struct work_struct tqueue_hangup;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
-
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* _MCF_SERIAL_H */
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index f7a0d37c422..abc00be5543 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -534,6 +534,11 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
serial_out(up, UART_IER, up->ier);
+ if (termios->c_cflag & CRTSCTS)
+ up->mcr |= UART_MCR_AFE;
+ else
+ up->mcr &= ~UART_MCR_AFE;
+
serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index f977c98cfa9..6bdf3362e3b 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2051,7 +2051,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
"transmitter\n",
port->dev ? port->dev->bus_id : "",
port->dev ? ": " : "",
- drv->dev_name, port->line);
+ drv->dev_name,
+ drv->tty_driver->name_base + port->line);
ops->shutdown(port);
}
@@ -2154,12 +2155,11 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
switch (port->iotype) {
case UPIO_PORT:
- snprintf(address, sizeof(address),
- "I/O 0x%x", port->iobase);
+ snprintf(address, sizeof(address), "I/O 0x%lx", port->iobase);
break;
case UPIO_HUB6:
snprintf(address, sizeof(address),
- "I/O 0x%x offset 0x%x", port->iobase, port->hub6);
+ "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
break;
case UPIO_MEM:
case UPIO_MEM32:
@@ -2177,7 +2177,9 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n",
port->dev ? port->dev->bus_id : "",
port->dev ? ": " : "",
- drv->dev_name, port->line, address, port->irq, uart_type(port));
+ drv->dev_name,
+ drv->tty_driver->name_base + port->line,
+ address, port->irq, uart_type(port));
}
static void
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 164d2a42eb5..7546aa887fa 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -431,131 +431,103 @@ first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
{
int i;
i = pcmcia_get_first_tuple(handle, tuple);
- if (i != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
+ if (i != 0)
return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int
-next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
-{
- int i;
- i = pcmcia_get_next_tuple(handle, tuple);
- if (i != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
+ if (i != 0)
return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
+ return pcmcia_parse_tuple(tuple, parse);
}
/*====================================================================*/
-static int simple_config(struct pcmcia_device *link)
+static int simple_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
static const int size_table[2] = { 8, 16 };
- struct serial_info *info = link->priv;
- struct serial_cfg_mem *cfg_mem;
- tuple_t *tuple;
- u_char *buf;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
- config_info_t config;
- int i, j, try;
- int s;
+ int *try = priv_data;
+
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
+ && (cf->io.win[0].base != 0)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
+ 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -EINVAL;
+}
- cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
- if (!cfg_mem)
- return -1;
+static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ int j;
+
+ if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ for (j = 0; j < 5; j++) {
+ p_dev->io.BasePort1 = base[j];
+ p_dev->io.IOAddrLines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
+static int simple_config(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+ int i = -ENODEV, try;
/* If the card is already configured, look up the port and irq */
- i = pcmcia_get_configuration_info(link, &config);
- if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
+ if (link->function_config) {
unsigned int port = 0;
- if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
- port = config.BasePort2;
+ if ((link->io.BasePort2 != 0) &&
+ (link->io.NumPorts2 == 8)) {
+ port = link->io.BasePort2;
info->slave = 1;
} else if ((info->manfid == MANFID_OSITECH) &&
- (config.NumPorts1 == 0x40)) {
- port = config.BasePort1 + 0x28;
+ (link->io.NumPorts1 == 0x40)) {
+ port = link->io.BasePort1 + 0x28;
info->slave = 1;
}
if (info->slave) {
- kfree(cfg_mem);
- return setup_serial(link, info, port, config.AssignedIRQ);
+ return setup_serial(link, info, port,
+ link->irq.AssignedIRQ);
}
}
- /* First pass: look for a config entry that looks normal. */
- tuple->TupleData = (cisdata_t *) buf;
- tuple->TupleOffset = 0;
- tuple->TupleDataMax = 255;
- tuple->Attributes = 0;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
- /* Two tries: without IO aliases, then with aliases */
- for (s = 0; s < 2; s++) {
- for (try = 0; try < 2; try++) {
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i != CS_SUCCESS)
- goto next_entry;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
- (cf->io.win[0].base != 0)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = (try == 0) ?
- 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
-next_entry:
- i = next_tuple(link, tuple, parse);
- }
- }
- }
+ /* First pass: look for a config entry that looks normal.
+ * Two tries: without IO aliases, then with aliases */
+ for (try = 0; try < 4; try++)
+ if (!pcmcia_loop_config(link, simple_config_check, &try))
+ goto found_port;
+
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
- ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- link->conf.ConfigIndex = cf->index;
- for (j = 0; j < 5; j++) {
- link->io.BasePort1 = base[j];
- link->io.IOAddrLines = base[j] ? 16 : 3;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
- }
- i = next_tuple(link, tuple, parse);
- }
+ if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
+ goto found_port;
- found_port:
- if (i != CS_SUCCESS) {
- printk(KERN_NOTICE
- "serial_cs: no usable port range found, giving up\n");
- cs_error(link, RequestIO, i);
- kfree(cfg_mem);
- return -1;
- }
+ printk(KERN_NOTICE
+ "serial_cs: no usable port range found, giving up\n");
+ cs_error(link, RequestIO, i);
+ return -1;
+found_port:
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
@@ -569,88 +541,76 @@ next_entry:
info->quirk->config(link);
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
- kfree(cfg_mem);
return -1;
}
- kfree(cfg_mem);
return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
}
-static int multi_config(struct pcmcia_device * link)
+static int multi_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- struct serial_info *info = link->priv;
- struct serial_cfg_mem *cfg_mem;
- tuple_t *tuple;
- u_char *buf;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
- int i, rc, base2 = 0;
+ int *base2 = priv_data;
+
+ /* The quad port cards have bad CIS's, so just look for a
+ window larger than 8 ports and assume it will be right */
+ if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+ *base2 = p_dev->io.BasePort1 + 8;
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
- cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
- if (!cfg_mem)
- return -1;
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
+static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int *base2 = priv_data;
+
+ if (cf->io.nwin == 2) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.BasePort2 = cf->io.win[1].base;
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+ *base2 = p_dev->io.BasePort2;
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
- tuple->TupleData = (cisdata_t *) buf;
- tuple->TupleOffset = 0;
- tuple->TupleDataMax = 255;
- tuple->Attributes = 0;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
+static int multi_config(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+ int i, base2 = 0;
/* First, look for a generic full-sized window */
link->io.NumPorts1 = info->multi * 8;
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- /* The quad port cards have bad CIS's, so just look for a
- window larger than 8 ports and assume it will be right */
- if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
- (cf->io.win[0].len > 8)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines =
- cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- base2 = link->io.BasePort1 + 8;
- if (i == CS_SUCCESS)
- break;
- }
- i = next_tuple(link, tuple, parse);
- }
-
- /* If that didn't work, look for two windows */
- if (i != CS_SUCCESS) {
+ if (pcmcia_loop_config(link, multi_config_check, &base2)) {
+ /* If that didn't work, look for two windows */
link->io.NumPorts1 = link->io.NumPorts2 = 8;
info->multi = 2;
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.BasePort2 = cf->io.win[1].base;
- link->io.IOAddrLines =
- cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- base2 = link->io.BasePort2;
- if (i == CS_SUCCESS)
- break;
- }
- i = next_tuple(link, tuple, parse);
+ if (pcmcia_loop_config(link, multi_config_check_notpicky,
+ &base2)) {
+ printk(KERN_NOTICE "serial_cs: no usable port range"
+ "found, giving up\n");
+ return -ENODEV;
}
}
- if (i != CS_SUCCESS) {
- cs_error(link, RequestIO, i);
- rc = -1;
- goto free_cfg_mem;
- }
-
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
+ /* FIXME: comment does not fit, error handling does not fit */
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link, RequestIRQ, i);
@@ -664,10 +624,9 @@ static int multi_config(struct pcmcia_device * link)
info->quirk->config(link);
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
- rc = -1;
- goto free_cfg_mem;
+ return -ENODEV;
}
/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
@@ -678,7 +637,8 @@ static int multi_config(struct pcmcia_device * link)
info->prodid == PRODID_POSSIO_GCC)) {
int err;
- if (cf->index == 1 || cf->index == 3) {
+ if (link->conf.ConfigIndex == 1 ||
+ link->conf.ConfigIndex == 3) {
err = setup_serial(link, info, base2,
link->irq.AssignedIRQ);
base2 = link->io.BasePort1;
@@ -695,18 +655,14 @@ static int multi_config(struct pcmcia_device * link)
if (info->quirk && info->quirk->wakeup)
info->quirk->wakeup(link);
- rc = 0;
- goto free_cfg_mem;
+ return 0;
}
setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
for (i = 0; i < info->multi - 1; i++)
setup_serial(link, info, base2 + (8 * i),
link->irq.AssignedIRQ);
- rc = 0;
-free_cfg_mem:
- kfree(cfg_mem);
- return rc;
+ return 0;
}
/*======================================================================
@@ -746,7 +702,7 @@ static int serial_config(struct pcmcia_device * link)
/* Is this a compliant multifunction card? */
tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
- info->multi = (first_tuple(link, tuple, parse) == CS_SUCCESS);
+ info->multi = (first_tuple(link, tuple, parse) == 0);
/* Is this a multiport card? */
tuple->DesiredTuple = CISTPL_MANFID;
@@ -770,7 +726,7 @@ static int serial_config(struct pcmcia_device * link)
((link->func_id == CISTPL_FUNCID_MULTI) ||
(link->func_id == CISTPL_FUNCID_SERIAL))) {
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
- if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
+ if (first_tuple(link, tuple, parse) == 0) {
if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
info->multi = cf->io.win[0].len >> 3;
if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index b9cbfc87f61..998e89dc5aa 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -63,8 +63,44 @@
#define UART_DUMMY_LSR_RX 0x100
#define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4)
-#define tx_enabled(port) ((port)->unused[0])
-#define rx_enabled(port) ((port)->unused[1])
+static inline int tx_enabled(struct uart_port *port)
+{
+ return port->unused[0] & 1;
+}
+
+static inline int rx_enabled(struct uart_port *port)
+{
+ return port->unused[0] & 2;
+}
+
+static inline int ms_enabled(struct uart_port *port)
+{
+ return port->unused[0] & 4;
+}
+
+static inline void ms_enable(struct uart_port *port, int enabled)
+{
+ if(enabled)
+ port->unused[0] |= 4;
+ else
+ port->unused[0] &= ~4;
+}
+
+static inline void rx_enable(struct uart_port *port, int enabled)
+{
+ if(enabled)
+ port->unused[0] |= 2;
+ else
+ port->unused[0] &= ~2;
+}
+
+static inline void tx_enable(struct uart_port *port, int enabled)
+{
+ if(enabled)
+ port->unused[0] |= 1;
+ else
+ port->unused[0] &= ~1;
+}
#ifdef SUPPORT_SYSRQ
@@ -75,7 +111,7 @@ static void ks8695uart_stop_tx(struct uart_port *port)
{
if (tx_enabled(port)) {
disable_irq(KS8695_IRQ_UART_TX);
- tx_enabled(port) = 0;
+ tx_enable(port, 0);
}
}
@@ -83,7 +119,7 @@ static void ks8695uart_start_tx(struct uart_port *port)
{
if (!tx_enabled(port)) {
enable_irq(KS8695_IRQ_UART_TX);
- tx_enabled(port) = 1;
+ tx_enable(port, 1);
}
}
@@ -91,18 +127,24 @@ static void ks8695uart_stop_rx(struct uart_port *port)
{
if (rx_enabled(port)) {
disable_irq(KS8695_IRQ_UART_RX);
- rx_enabled(port) = 0;
+ rx_enable(port, 0);
}
}
static void ks8695uart_enable_ms(struct uart_port *port)
{
- enable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+ if (!ms_enabled(port)) {
+ enable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+ ms_enable(port,1);
+ }
}
static void ks8695uart_disable_ms(struct uart_port *port)
{
- disable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+ if (ms_enabled(port)) {
+ disable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+ ms_enable(port,0);
+ }
}
static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
@@ -285,8 +327,9 @@ static int ks8695uart_startup(struct uart_port *port)
int retval;
set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN);
- tx_enabled(port) = 0;
- rx_enabled(port) = 1;
+ tx_enable(port, 0);
+ rx_enable(port, 1);
+ ms_enable(port, 1);
/*
* Allocate the IRQ
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index e41766d0803..a94a2ab4b57 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -616,7 +616,7 @@ static int __devexit hv_remove(struct of_device *dev)
return 0;
}
-static struct of_device_id hv_match[] = {
+static const struct of_device_id hv_match[] = {
{
.name = "console",
.compatible = "qcn",
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 29b4458abf7..0355efe115d 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -1078,7 +1078,7 @@ static int __devexit sab_remove(struct of_device *op)
return 0;
}
-static struct of_device_id sab_match[] = {
+static const struct of_device_id sab_match[] = {
{
.name = "se",
},
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index a378464f929..a4dc79b1d7a 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1506,7 +1506,7 @@ static int __devexit su_remove(struct of_device *op)
return 0;
}
-static struct of_device_id su_match[] = {
+static const struct of_device_id su_match[] = {
{
.name = "su",
},
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 3cb4c8aee13..45a299f3561 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1480,7 +1480,7 @@ static int __devexit zs_remove(struct of_device *op)
return 0;
}
-static struct of_device_id zs_match[] = {
+static const struct of_device_id zs_match[] = {
{
.name = "zs",
},