Staging: Add octeon-ethernet driver files.

The octeon-ethernet driver supports the sgmii, rgmii, spi, and xaui
ports present on the Cavium OCTEON family of SOCs.  These SOCs are
multi-core mips64 processors with existing support over in arch/mips.

The driver files can be categorized into three basic groups:

1) Register definitions, these are named cvmx-*-defs.h

2) Main driver code, these have names that don't start cvmx-.

3) Interface specific functions and other utility code, names starting
with cvmx-

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 110 insertions, 0 deletions

diff --git a/drivers/staging/octeon/cvmx-helper-rgmii.h b/drivers/staging/octeon/cvmx-helper-rgmii.h
new file mode 100644
index 00000000000..ea2652604a5
--- /dev/null
+++ b/drivers/staging/octeon/cvmx-helper-rgmii.h
@@ -0,0 +1,110 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/**
+ * @file
+ *
+ * Functions for RGMII/GMII/MII initialization, configuration,
+ * and monitoring.
+ *
+ */
+#ifndef __CVMX_HELPER_RGMII_H__
+#define __CVMX_HELPER_RGMII_H__
+
+/**
+ * Probe RGMII ports and determine the number present
+ *
+ * @interface: Interface to probe
+ *
+ * Returns Number of RGMII/GMII/MII ports (0-4).
+ */
+extern int __cvmx_helper_rgmii_probe(int interface);
+
+/**
+ * Put an RGMII interface in loopback mode. Internal packets sent
+ * out will be received back again on the same port. Externally
+ * received packets will echo back out.
+ *
+ * @port:   IPD port number to loop.
+ */
+extern void cvmx_helper_rgmii_internal_loopback(int port);
+
+/**
+ * Configure all of the ASX, GMX, and PKO regsiters required
+ * to get RGMII to function on the supplied interface.
+ *
+ * @interface: PKO Interface to configure (0 or 1)
+ *
+ * Returns Zero on success
+ */
+extern int __cvmx_helper_rgmii_enable(int interface);
+
+/**
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set().
+ *
+ * @ipd_port: IPD/PKO port to query
+ *
+ * Returns Link state
+ */
+extern cvmx_helper_link_info_t __cvmx_helper_rgmii_link_get(int ipd_port);
+
+/**
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead.
+ *
+ * @ipd_port:  IPD/PKO port to configure
+ * @link_info: The new link state
+ *
+ * Returns Zero on success, negative on failure
+ */
+extern int __cvmx_helper_rgmii_link_set(int ipd_port,
+					cvmx_helper_link_info_t link_info);
+
+/**
+ * Configure a port for internal and/or external loopback. Internal loopback
+ * causes packets sent by the port to be received by Octeon. External loopback
+ * causes packets received from the wire to sent out again.
+ *
+ * @ipd_port: IPD/PKO port to loopback.
+ * @enable_internal:
+ *                 Non zero if you want internal loopback
+ * @enable_external:
+ *                 Non zero if you want external loopback
+ *
+ * Returns Zero on success, negative on failure.
+ */
+extern int __cvmx_helper_rgmii_configure_loopback(int ipd_port,
+						  int enable_internal,
+						  int enable_external);
+
+#endif