Staging: rt2860: remove WPA_SUPPLICANT_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 2 insertions, 21 deletions

diff --git a/drivers/staging/rt2860/sta/connect.c b/drivers/staging/rt2860/sta/connect.c
index a31f53ddc77..7cede82cc5b 100644
--- a/drivers/staging/rt2860/sta/connect.c
+++ b/drivers/staging/rt2860/sta/connect.c
@@ -230,9 +230,8 @@ VOID CntlIdleProc(
 			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
 			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
 			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
-#ifdef WPA_SUPPLICANT_SUPPORT
+
             if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_ENABLE_WITH_WEB_UI)
-#endif // WPA_SUPPLICANT_SUPPORT //
             {
     			// Set the AutoReconnectSsid to prevent it reconnect to old SSID
     			// Since calling this indicate user don't want to connect to that SSID anymore.
@@ -1434,15 +1433,11 @@ VOID LinkUp(
 
 
 		// If WEP is enabled, add paiewise and shared key
-#ifdef WPA_SUPPLICANT_SUPPORT
         if (((pAd->StaCfg.WpaSupplicantUP)&&
              (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)&&
              (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)) ||
             ((pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)&&
               (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)))
-#else
-		if (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)
-#endif // WPA_SUPPLICANT_SUPPORT //
 		{
 			PUCHAR	Key;
 			UCHAR 	CipherAlg;
@@ -1894,7 +1889,7 @@ VOID LinkDown(
 	}
 
 	// 802.1x port control
-#ifdef WPA_SUPPLICANT_SUPPORT
+
 	// Prevent clear PortSecured here with static WEP
 	// NetworkManger set security policy first then set SSID to connect AP.
 	if (pAd->StaCfg.WpaSupplicantUP &&
@@ -1904,7 +1899,6 @@ VOID LinkDown(
 		pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
 	}
 	else
-#endif // WPA_SUPPLICANT_SUPPORT //
 	{
 		pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
 		pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP;
diff --git a/drivers/staging/rt2860/sta/rtmp_data.c b/drivers/staging/rt2860/sta/rtmp_data.c
index 252817e13e7..fc5b75a5c96 100644
--- a/drivers/staging/rt2860/sta/rtmp_data.c
+++ b/drivers/staging/rt2860/sta/rtmp_data.c
@@ -50,7 +50,6 @@ VOID STARxEAPOLFrameIndicate(
 	PRXWI_STRUC		pRxWI = pRxBlk->pRxWI;
 	UCHAR			*pTmpBuf;
 
-#ifdef WPA_SUPPLICANT_SUPPORT
 	if (pAd->StaCfg.WpaSupplicantUP)
 	{
 		// All EAPoL frames have to pass to upper layer (ex. WPA_SUPPLICANT daemon)
@@ -103,7 +102,6 @@ VOID STARxEAPOLFrameIndicate(
 		}
 	}
 	else
-#endif // WPA_SUPPLICANT_SUPPORT //
 	{
 		// Special DATA frame that has to pass to MLME
 		//	 1. Cisco Aironet frames for CCX2. We need pass it to MLME for special process
@@ -223,13 +221,11 @@ BOOLEAN STACheckTkipMICValue(
 	{
 		DBGPRINT_RAW(RT_DEBUG_ERROR,("Rx MIC Value error 2\n"));
 
-#ifdef WPA_SUPPLICANT_SUPPORT
 		if (pAd->StaCfg.WpaSupplicantUP)
 		{
 			WpaSendMicFailureToWpaSupplicant(pAd, (pWpaKey->Type == PAIRWISEKEY) ? TRUE : FALSE);
 		}
 		else
-#endif // WPA_SUPPLICANT_SUPPORT //
 		{
 			RTMPReportMicError(pAd, pWpaKey);
 		}
@@ -961,9 +957,7 @@ NDIS_STATUS STASendPacket(
 		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
 		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
 		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef WPA_SUPPLICANT_SUPPORT
 		  || (pAd->StaCfg.IEEE8021X == TRUE)
-#endif // WPA_SUPPLICANT_SUPPORT //
 		  )
 		  && ((pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED) || (pAd->StaCfg.MicErrCnt >= 2))
 		  && (RTMP_GET_PACKET_EAPOL(pPacket)== FALSE)
@@ -1204,9 +1198,7 @@ VOID	RTMPSendNullFrame(
          (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
          (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
          (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef WPA_SUPPLICANT_SUPPORT
 			  || (pAd->StaCfg.IEEE8021X == TRUE)
-#endif
         ) &&
        (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
 	{
@@ -1327,13 +1319,11 @@ VOID STAFindCipherAlgorithm(
 			CipherAlg = CIPHER_NONE;
 		else if ((Cipher == Ndis802_11EncryptionDisabled) || (pAd->SharedKey[BSS0][KeyIdx].KeyLen == 0))
 			CipherAlg = CIPHER_NONE;
-#ifdef WPA_SUPPLICANT_SUPPORT
 	    else if ( pAd->StaCfg.WpaSupplicantUP &&
 	             (Cipher == Ndis802_11Encryption1Enabled) &&
 	             (pAd->StaCfg.IEEE8021X == TRUE) &&
 	             (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
 	        CipherAlg = CIPHER_NONE;
-#endif // WPA_SUPPLICANT_SUPPORT //
 		else
 		{
 			//Header_802_11.FC.Wep = 1;
diff --git a/drivers/staging/rt2860/sta/wpa.c b/drivers/staging/rt2860/sta/wpa.c
index 2609d845fd5..c906eea163d 100644
--- a/drivers/staging/rt2860/sta/wpa.c
+++ b/drivers/staging/rt2860/sta/wpa.c
@@ -1915,8 +1915,6 @@ VOID	RTMPReportMicError(
     }
 }
 
-
-#ifdef WPA_SUPPLICANT_SUPPORT
 #define	LENGTH_EAP_H    4
 // If the received frame is EAP-Packet ,find out its EAP-Code (Request(0x01), Response(0x02), Success(0x03), Failure(0x04)).
 INT	    WpaCheckEapCode(
@@ -1957,7 +1955,6 @@ VOID    WpaSendMicFailureToWpaSupplicant(
 
     return;
 }
-#endif // WPA_SUPPLICANT_SUPPORT //
 
 VOID	WpaMicFailureReportFrame(
 	IN  PRTMP_ADAPTER   pAd,