Staging: slicoss: clean up SLIC_DUMP_ENABLED

As SLIC_DUMP_ENABLED was disabled, remove the code that it was keeping
from being built as it was not ever used.  This removed a lot.

Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

4 files changed, 2 insertions, 1570 deletions

diff --git a/drivers/staging/slicoss/slic.h b/drivers/staging/slicoss/slic.h
index 72ce9166bb6..19ba9cd29ea 100644
--- a/drivers/staging/slicoss/slic.h
+++ b/drivers/staging/slicoss/slic.h
@@ -181,17 +181,6 @@ struct slic_cmdqueue {
 
 #define SLIC_MAX_CARDS              32
 #define SLIC_MAX_PORTS              4        /* Max # of ports per card   */
-#if SLIC_DUMP_ENABLED
-/*
-Dump buffer size
-
-This cannot be bigger than the max DMA size the card supports,
-given the current code structure in the host and ucode.
-Mojave supports 16K, Oasis supports 16K-1, so
-just set this at 15K, shouldnt make that much of a diff.
-*/
-#define DUMP_BUF_SIZE               0x3C00
-#endif
 
 
 struct mcast_address {
@@ -347,30 +336,6 @@ struct sliccard {
     u32             max_isr_xmits;
     u32             rcv_interrupt_yields;
     u32             tx_packets;
-#if SLIC_DUMP_ENABLED
-    u32             dumpstatus;           /* Result of dump UPR */
-    void *cmdbuffer;
-
-    ulong               cmdbuffer_phys;
-    u32             cmdbuffer_physl;
-    u32             cmdbuffer_physh;
-
-    u32             dump_count;
-    struct task_struct *dump_task_id;
-    u32             dump_wait_count;
-    uint                dumpthread_running; /* has a dump thread been init'd  */
-    uint                dump_requested;     /* 0 no, 1 = reqstd 2=curr 3=done */
-    u32             dumptime_start;
-    u32             dumptime_complete;
-    u32             dumptime_delta;
-    void *dumpbuffer;
-    ulong               dumpbuffer_phys;
-    u32             dumpbuffer_physl;
-    u32             dumpbuffer_physh;
-    wait_queue_head_t   dump_wq;
-    struct file        *dumphandle;
-    mm_segment_t        dumpfile_fs;
-#endif
     u32             debug_ix;
     ushort              reg_type[32];
     ushort              reg_offset[32];
@@ -550,25 +515,6 @@ struct adapter {
     struct net_device_stats stats;
 };
 
-#if SLIC_DUMP_ENABLED
-#define SLIC_DUMP_REQUESTED      1
-#define SLIC_DUMP_IN_PROGRESS    2
-#define SLIC_DUMP_DONE           3
-
-/****************************************************************************
- *
- * Microcode crash information structure.  This
- * structure is written out to the card's SRAM when the microcode panic's.
- *
- ****************************************************************************/
-struct slic_crash_info {
-    ushort  cpu_id;
-    ushort  crash_pc;
-};
-
-#define CRASH_INFO_OFFSET   0x155C
-
-#endif
 
 #define UPDATE_STATS(largestat, newstat, oldstat)                        \
 {                                                                        \
diff --git a/drivers/staging/slicoss/slicdump.h b/drivers/staging/slicoss/slicdump.h
deleted file mode 100644
index 92a9b44bcad..00000000000
--- a/drivers/staging/slicoss/slicdump.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- *
- * Copyright (c) 2000-2002 Alacritech, Inc.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- *    copyright notice, this list of conditions and the following
- *    disclaimer in the documentation and/or other materials provided
- *    with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL ALACRITECH, INC. OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * NO LICENSE TO ANY ALACRITECH PATENT CLAIM IS GRANTED BY ANY COPYRIGHT
- * LICENSE TO THIS OR OTHER SOFTWARE. THIS SOFTWARE MAY BE COVERED BY
- * ALACRITECH PATENTS INCLUDING BUT NOT LIMITED TO U.S. PATENT NOS. 6,226,680,
- * 6,247,060, 6,334,153, 6,389,479, 6,393,487, 6,427,171, 6,427,173
- * and 6,434,620.
- * THIS SOFTWARE IS NOT SUBJECT TO THE GNU GENERAL PUBLIC LICENSE (GPL).
- *
- * The views and conclusions contained in the software and
- * documentation are those of the authors and should not be
- * interpreted as representing official policies, either
- * expressed or implied, of Alacritech, Inc.
- */
-#ifndef _SLIC_DUMP_H_
-#define _SLIC_DUMP_H_
-
-#define DEBUG_SUCCESS   0
-
-/***********************************************************************
- *
- * Utility processor register locations
- *
- **********************************************************************/
-#define UTILITY_RESET       0x0
-#define UTILITY_ISP_ADDR    0x4     /* Interrupt status Pointer */
-#define UTILITY_ISR_ADDR    0x8     /* Interrupt status Register */
-#define UTILITY_ICR_ADDR    0xc     /* Interrupt Control Register */
-#define UTILITY_CPR_ADDR    0x10    /* Command Pointer Register */
-#define UTILITY_DPR_ADDR    0x14    /* Data Pointer Register */
-#define UTILITY_DMP_TRQ     0x18    /* Dump queue onto ALU for analyser */
-#define UTILITY_UPP_ADDR    0x1c    /* Bits 63-32 of cmd/data pointer */
-
-/***********************************************************************
- *
- * INIC status register bits
- *
- ***********************************************************************/
-#define SLIC_ISR_CC         0x10000000  /* Command complete - synchronous */
-#define SLIC_ISR_ERR        0x01000000  /* Command Error - synchronous */
-#define SLIC_ISR_CMD_MASK   0x11000000  /* Command status mask */
-#define SLIC_ISR_TPH        0x00080000  /* Transmit processor halted - async */
-#define SLIC_ISR_RPH        0x00040000  /* Receive processor halted - async */
-
-/***********************************************************************
- *
- * INIC Control register values
- *
- ***********************************************************************/
-#define SLIC_ICR_OFF        0           /* Interrupts disabled */
-#define SLIC_ICR_ON         1           /* Interrupts enabled */
-#define SLIC_ICR_MASK       2           /* Interrupts masked */
-
-#define WRITE_DREG(reg, value, flush)                           \
-{                                                               \
-    writel((value), (reg));                                     \
-    if ((flush)) {                                               \
-	mb();                                                   \
-    }                                                           \
-}
-
-/************************************************************************
- *
- * Command Format
- *
- * Each command contains a command byte which is defined as follows:
- *
- *  bits:   7-3     2       1-0
- *      ----------------------------------------------
- *      command     Alt. Proc   Processor
- *
- ************************************************************************/
-
-/*
- * Macro to create the command byte given the command, Alt. Proc, and
- * Processor values.  Note that the macro assumes that the values are
- * preshifted.  That is, the values for alt. proc are 0 for transmit and
- * 4 for receive.
- */
-#define COMMAND_BYTE(command, alt_proc, proc) ((command) | (alt_proc) | (proc))
-
-/*
- * Command values
- */
-#define CMD_HALT        0x0     /* Send a halt to the INIC */
-#define CMD_RUN         0x8     /* Start the halted INIC */
-#define CMD_STEP        0x10    /* Single step the inic */
-#define CMD_BREAK       0x18    /* Set a breakpoint - 8 byte command */
-#define CMD_RESET_BREAK 0x20    /* Reset a breakpoint - 8 byte cmd */
-#define CMD_DUMP        0x28    /* Dump INIC memory - 8 byte command */
-#define CMD_LOAD        0x30    /* Load INIC memory - 8 byte command */
-#define CMD_MAP         0x38    /* Map out a ROM instruction - 8 BC */
-#define CMD_CAM_OPS     0x38    /* perform ops on specific CAM */
-#define CMD_XMT         0x40    /* Transmit frame */
-#define CMD_RCV         0x48    /* Receive frame */
-
-/*
- * Alt. Proc values
- *
- * When the proc value is set to the utility processor, the Alt. Proc
- * specifies which processor handles the debugging.
- */
-#define ALT_PROC_TRANSMIT   0x0
-#define ALT_PROC_RECEIVE    0x4
-
-/*
- * Proc values
- */
-#define PROC_INVALID        0x0
-#define PROC_NONE           0x0  /* Gigabit use */
-#define PROC_TRANSMIT       0x1
-#define PROC_RECEIVE        0x2
-#define PROC_UTILITY        0x3
-
-/******************************************************************
- *
- * 8 byte command structure definitions
- *
- ******************************************************************/
-
-/*
- * Break and Reset Break command structure
- */
-struct BREAK {
-    unsigned char     command;    /* Command word defined above */
-    unsigned char     resvd;
-    ushort    count;      /* Number of executions before break */
-    u32   addr;       /* Address of break point */
-};
-
-/*
- * Dump and Load command structure
- */
-struct dump_cmd {
-    unsigned char     cmd;        /* Command word defined above */
-    unsigned char     desc;       /* Descriptor values - defined below */
-    ushort    count;      /* number of 4 byte words to be transferred */
-    u32   addr;       /* start address of dump or load */
-};
-
-/*
- * Receive or Transmit a frame.
- */
-struct RCV_OR_XMT_FRAME {
-    unsigned char     command;    /* Command word defined above */
-    unsigned char     MacId;      /* Mac ID of interface - transmit only */
-    ushort    count;      /* Length of frame in bytes */
-    u32   pad;        /* not used */
-};
-
-/*
- * Values of desc field in DUMP_OR_LOAD structure
- */
-#define DESC_RFILE          0x0     /* Register file */
-#define DESC_SRAM           0x1     /* SRAM */
-#define DESC_DRAM           0x2     /* DRAM */
-#define DESC_QUEUE          0x3     /* queues */
-#define DESC_REG            0x4     /* General registers (pc, status, etc) */
-#define DESC_SENSE          0x5     /* Sense register */
-
-/* Descriptor field definitions for CMD_DUMP_CAM */
-#define DUMP_CAM_A              0
-#define DUMP_CAM_B              1               /* unused at present */
-#define DUMP_CAM_C              2
-#define DUMP_CAM_D              3
-#define SEARCH_CAM_A            4
-#define SEARCH_CAM_C            5
-
-/*
- * Map command to replace a command in ROM with a command in WCS
- */
-struct MAP {
-    unsigned char   command;    /* Command word defined above */
-    unsigned char   not_used[3];
-    ushort  map_to;     /* Instruction address in WCS */
-    ushort  map_out;    /* Instruction address in ROM */
-};
-
-/*
- * Misc definitions
- */
-#define SLIC_MAX_QUEUE       32 /* Total # of queues on the INIC (0-31)*/
-#define SLIC_4MAX_REG       512 /* Total # of 4-port file-registers    */
-#define SLIC_1MAX_REG       384 /* Total # of file-registers           */
-#define SLIC_GBMAX_REG     1024 /* Total # of Gbit file-registers      */
-#define SLIC_NUM_REG         32 /* non-file-registers = NUM_REG in tm-simba.h */
-#define SLIC_GB_CAMA_SZE     32
-#define SLIC_GB_CAMB_SZE     16
-#define SLIC_GB_CAMAB_SZE    32
-#define SLIC_GB_CAMC_SZE     16
-#define SLIC_GB_CAMD_SZE     16
-#define SLIC_GB_CAMCD_SZE    32
-
-/*
- * Coredump header structure
- */
-struct CORE_Q {
-    u32   queueOff;           /* Offset of queue */
-    u32   queuesize;          /* size of queue */
-};
-
-#define DRIVER_NAME_SIZE    32
-
-struct sliccore_hdr {
-    unsigned char driver_version[DRIVER_NAME_SIZE]; /* Driver version string */
-    u32   RcvRegOff;          /* Offset of receive registers */
-    u32   RcvRegsize;         /* size of receive registers */
-    u32   XmtRegOff;          /* Offset of transmit registers */
-    u32   XmtRegsize;         /* size of transmit registers */
-    u32   FileRegOff;         /* Offset of register file */
-    u32   FileRegsize;        /* size of register file */
-    u32   SramOff;            /* Offset of Sram */
-    u32   Sramsize;           /* size of Sram */
-    u32   DramOff;            /* Offset of Dram */
-    u32   Dramsize;           /* size of Dram */
-    CORE_Q    queues[SLIC_MAX_QUEUE]; /* size and offsets of queues */
-    u32   CamAMOff;           /* Offset of CAM A contents */
-    u32   CamASize;           /* Size of Cam A */
-    u32   CamBMOff;           /* Offset of CAM B contents */
-    u32   CamBSize;           /* Size of Cam B */
-    u32   CamCMOff;           /* Offset of CAM C contents */
-    u32   CamCSize;           /* Size of Cam C */
-    u32   CamDMOff;           /* Offset of CAM D contents */
-    u32   CamDSize;           /* Size of Cam D */
-};
-
-/*
- * definitions needed for our kernel-mode gdb stub.
- */
-/***********************************************************************
- *
- * Definitions & Typedefs
- *
- **********************************************************************/
-#define BUFMAX      0x20000 /* 128k - size of input/output buffer */
-#define BUFMAXP2    5       /* 2**5 (32) 4K pages */
-
-#define IOCTL_SIMBA_BREAK           _IOW('s', 0, unsigned long)
-/* #define IOCTL_SIMBA_INIT            _IOW('s', 1, unsigned long) */
-#define IOCTL_SIMBA_KILL_TGT_PROC   _IOW('s', 2, unsigned long)
-
-/***********************************************************************
- *
- * Global variables
- *
- ***********************************************************************/
-
-#define THREADRECEIVE   1   /* bit 0 of StoppedThreads */
-#define THREADTRANSMIT  2   /* bit 1 of StoppedThreads */
-#define THREADBOTH      3   /* bit 0 and 1.. */
-
-#endif  /*  _SLIC_DUMP_H  */
diff --git a/drivers/staging/slicoss/slicinc.h b/drivers/staging/slicoss/slicinc.h
index 2c70d63fa5b..09e89c108ed 100644
--- a/drivers/staging/slicoss/slicinc.h
+++ b/drivers/staging/slicoss/slicinc.h
@@ -145,36 +145,4 @@ static int  slic_upr_queue_request(struct adapter      *adapter,
 static void slic_mcast_set_list(struct net_device *dev);
 static void slic_mcast_init_crc32(void);
 
-#if SLIC_DUMP_ENABLED
-static int   slic_dump_thread(void *context);
-static uint  slic_init_dump_thread(struct sliccard *card);
-static unsigned char slic_get_dump_index(char *path);
-static u32 slic_dump_card(struct sliccard *card, bool resume);
-static u32 slic_dump_halt(struct sliccard *card, unsigned char proc);
-static u32 slic_dump_reg(struct sliccard *card, unsigned char proc);
-static u32 slic_dump_data(struct sliccard *card, u32 addr,
-			ushort count, unsigned char desc);
-static u32 slic_dump_queue(struct sliccard *card, u32 buf_phys,
-			u32 buf_physh, u32 queue);
-static u32 slic_dump_load_queue(struct sliccard *card, u32 data,
-				u32 queue);
-static u32 slic_dump_cam(struct sliccard *card, u32 addr,
-			u32 count, unsigned char desc);
-
-static u32 slic_dump_resume(struct sliccard *card, unsigned char proc);
-static u32 slic_dump_send_cmd(struct sliccard *card, u32 cmd_phys,
-				u32 cmd_physh, u32 buf_phys,
-				u32 buf_physh);
-
-#define create_file(x)         STATUS_SUCCESS
-#define write_file(w, x, y, z) STATUS_SUCCESS
-#define close_file(x)          STATUS_SUCCESS
-#define read_file(w, x, y, z)  STATUS_SUCCESS
-#define open_file(x)           STATUS_SUCCESS
-
-/* PAGE_SIZE * 16 */
-#define DUMP_PAGE_SIZE         0xFFFF
-#define DUMP_PAGE_SIZE_HALF    0x7FFE
-#endif
-
 #endif /* _SLIC_INCLUDE_H_ */
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index e0016f79969..bef3a0b5829 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -55,7 +55,6 @@
  */
 
 
-#define SLIC_DUMP_ENABLED               0
 #define KLUDGE_FOR_4GB_BOUNDARY         1
 #define DEBUG_MICROCODE                 1
 #define DBG                             1
@@ -105,10 +104,6 @@
 #include <linux/uaccess.h>
 #include "slicinc.h"
 
-#if SLIC_DUMP_ENABLED
-#include "slicdump.h"
-#endif
-
 #define SLIC_POWER_MANAGEMENT  0
 
 static uint slic_first_init = 1;
@@ -127,8 +122,6 @@ static struct net_device *head_netdevice;
 static struct base_driver slic_global = { {}, 0, 0, 0, 1, NULL, NULL };
 static int intagg_delay = 100;
 static u32 dynamic_intagg;
-static int errormsg;
-static int goodmsg;
 static unsigned int rcv_count;
 static struct dentry *slic_debugfs;
 
@@ -541,25 +534,12 @@ static int slic_entry_open(struct net_device *dev)
 		card->master, adapter);
 	if (!card->master)
 		card->master = adapter;
-#if SLIC_DUMP_ENABLED
-	if (!(card->dumpthread_running))
-		init_waitqueue_head(&card->dump_wq);
-#endif
 
 	if (locked) {
 		spin_unlock_irqrestore(&slic_global.driver_lock.lock,
 					slic_global.driver_lock.flags);
 		locked = 0;
 	}
-#if SLIC_DUMP_ENABLED
-	if (!(card->dumpthread_running)) {
-		DBG_MSG("attempt to initialize dump thread\n");
-		status = slic_init_dump_thread(card);
-		/*
-		Even if the dump thread fails, we will continue at this point
-		*/
-	}
-#endif
 
 	return STATUS_SUCCESS;
 }
@@ -672,30 +652,6 @@ static int slic_entry_halt(struct net_device *dev)
 
 #ifdef AUTOMATIC_RESET
 	if (!card->adapters_activated) {
-
-#if SLIC_DUMP_ENABLED
-		if (card->dumpthread_running) {
-			uint status;
-			DBG_MSG("attempt to terminate dump thread pid[%x]\n",
-				card->dump_task_id);
-			status = kill_proc(card->dump_task_id->pid, SIGKILL, 1);
-
-			if (!status) {
-				int count = 10 * 100;
-				while (card->dumpthread_running && --count) {
-					current->state = TASK_INTERRUPTIBLE;
-					schedule_timeout(1);
-				}
-
-				if (!count) {
-					DBG_MSG
-					    ("slicmon thread cleanup FAILED \
-					     pid[%x]\n",
-					     card->dump_task_id->pid);
-				}
-			}
-		}
-#endif
 		DBG_MSG("slicoss: %s (%s) initiate CARD_HALT\n", __func__,
 			dev->name);
 
@@ -737,37 +693,6 @@ static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 			slic_intagg_set(adapter, intagg);
 			return 0;
 		}
-#ifdef SLIC_USER_REQUEST_DUMP_ENABLED
-	case SIOCSLICDUMPCARD:
-		{
-			struct adapter *adapter = netdev_priv(dev);
-			struct sliccard *card;
-
-			ASSERT(adapter);
-			ASSERT(adapter->card)
-			card = adapter->card;
-
-			DBG_IOCTL("slic_ioctl  SIOCSLIC_DUMP_CARD\n");
-
-			if (card->dump_requested == SLIC_DUMP_DONE) {
-				printk(SLICLEVEL
-				       "SLIC Card dump to be overwritten\n");
-				card->dump_requested = SLIC_DUMP_REQUESTED;
-			} else if ((card->dump_requested == SLIC_DUMP_REQUESTED)
-				   || (card->dump_requested ==
-				       SLIC_DUMP_IN_PROGRESS)) {
-				printk(SLICLEVEL
-				       "SLIC Card dump Requested but already \
-					in progress... ignore\n");
-			} else {
-				printk(SLICLEVEL
-				       "SLIC Card #%d Dump Requested\n",
-				       card->cardnum);
-				card->dump_requested = SLIC_DUMP_REQUESTED;
-			}
-			return 0;
-		}
-#endif
 
 #ifdef SLIC_TRACE_DUMP_ENABLED
 	case SIOCSLICTRACEDUMP:
@@ -1418,8 +1343,7 @@ static void slic_init_cleanup(struct adapter *adapter)
 		del_timer(&adapter->statstimer);
 	}
 #endif
-#if !SLIC_DUMP_ENABLED && SLIC_PING_TIMER_ENABLED
-/*#if SLIC_DUMP_ENABLED && SLIC_PING_TIMER_ENABLED*/
+#if SLIC_PING_TIMER_ENABLED
 	if (adapter->pingtimerset) {
 		DBG_MSG("pingtimer ");
 		adapter->pingtimerset = 0;
@@ -1663,38 +1587,7 @@ static void slic_timer_ping(ulong dev)
 	ASSERT(adapter);
 	card = adapter->card;
 	ASSERT(card);
-#if !SLIC_DUMP_ENABLED
-/*#if SLIC_DUMP_ENABLED*/
-	if ((adapter->state == ADAPT_UP) && (card->state == CARD_UP)) {
-		int status;
 
-		if (card->pingstatus != ISR_PINGMASK) {
-			if (errormsg++ < 5) {
-				DBG_MSG
-				    ("%s (%s) CARD HAS CRASHED  PING_status == \
-				     %x ERRORMSG# %d\n",
-				     __func__, adapter->netdev->name,
-				     card->pingstatus, errormsg);
-			}
-			/*   ASSERT(card->pingstatus == ISR_PINGMASK); */
-		} else {
-			if (goodmsg++ < 5) {
-				DBG_MSG
-				    ("slicoss: %s (%s) PING_status == %x \
-				     GOOD!!!!!!!! msg# %d\n",
-				     __func__, adapter->netdev->name,
-				     card->pingstatus, errormsg);
-			}
-		}
-		card->pingstatus = 0;
-		status = slic_upr_request(adapter, SLIC_UPR_PING, 0, 0, 0, 0);
-
-		ASSERT(status == 0);
-	} else {
-		DBG_MSG("slicoss %s (%s) adapter[%p] NOT UP!!!!\n",
-			__func__, adapter->netdev->name, adapter);
-	}
-#endif
 	adapter->pingtimer.expires = jiffies + (PING_TIMER_INTERVAL * HZ);
 	add_timer(&adapter->pingtimer);
 }
@@ -1835,8 +1728,7 @@ static int slic_if_init(struct adapter *adapter)
 		adapter->statstimerset = 1;
 	}
 #endif
-#if !SLIC_DUMP_ENABLED && SLIC_PING_TIMER_ENABLED
-/*#if SLIC_DUMP_ENABLED && SLIC_PING_TIMER_ENABLED*/
+#if SLIC_PING_TIMER_ENABLED
 	if (!adapter->pingtimerset) {
 		DBG_MSG("slicoss: %s start card_ping_timer(slic)\n",
 			__func__);
@@ -2121,23 +2013,6 @@ static void slic_card_cleanup(struct sliccard *card)
 {
 	DBG_MSG("slicoss: %s ENTER\n", __func__);
 
-#if SLIC_DUMP_ENABLED
-	if (card->dumpbuffer) {
-		card->dumpbuffer_phys = 0;
-		card->dumpbuffer_physl = 0;
-		card->dumpbuffer_physh = 0;
-		kfree(card->dumpbuffer);
-		card->dumpbuffer = NULL;
-	}
-	if (card->cmdbuffer) {
-		card->cmdbuffer_phys = 0;
-		card->cmdbuffer_physl = 0;
-		card->cmdbuffer_physh = 0;
-		kfree(card->cmdbuffer);
-		card->cmdbuffer = NULL;
-	}
-#endif
-
 	if (card->loadtimerset) {
 		card->loadtimerset = 0;
 		del_timer(&card->loadtimer);
@@ -2616,43 +2491,6 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
 	 */
 	card->pingstatus = ISR_PINGMASK;
 
-#if SLIC_DUMP_ENABLED
-	if (!card->dumpbuffer) {
-		card->dumpbuffer = kmalloc(DUMP_PAGE_SIZE, GFP_KERNEL);
-
-		ASSERT(card->dumpbuffer);
-		if (card->dumpbuffer == NULL)
-			return -ENOMEM;
-	}
-	/*
-	 *  Smear the shared memory structure and then obtain
-	 *  the PHYSICAL address of this structure
-	 */
-	memset(card->dumpbuffer, 0, DUMP_PAGE_SIZE);
-	card->dumpbuffer_phys = virt_to_bus(card->dumpbuffer);
-	card->dumpbuffer_physh = SLIC_GET_ADDR_HIGH(card->dumpbuffer_phys);
-	card->dumpbuffer_physl = SLIC_GET_ADDR_LOW(card->dumpbuffer_phys);
-
-	/*
-	 *  Allocate COMMAND BUFFER
-	 */
-	if (!card->cmdbuffer) {
-		card->cmdbuffer = kmalloc(sizeof(struct dump_cmd), GFP_KERNEL);
-
-		ASSERT(card->cmdbuffer);
-		if (card->cmdbuffer == NULL)
-			return -ENOMEM;
-	}
-	/*
-	 *  Smear the shared memory structure and then obtain
-	 *  the PHYSICAL address of this structure
-	 */
-	memset(card->cmdbuffer, 0, sizeof(struct dump_cmd));
-	card->cmdbuffer_phys = virt_to_bus(card->cmdbuffer);
-	card->cmdbuffer_physh = SLIC_GET_ADDR_HIGH(card->cmdbuffer_phys);
-	card->cmdbuffer_physl = SLIC_GET_ADDR_LOW(card->cmdbuffer_phys);
-#endif
-
 	/*
 	 * Lastly, mark our card state as up and return success
 	 */
@@ -3371,11 +3209,6 @@ static void slic_upr_request_complete(struct adapter *adapter, u32 isr)
 	case SLIC_UPR_PING:
 		card->pingstatus |= (isr & ISR_PINGDSMASK);
 		break;
-#if SLIC_DUMP_ENABLED
-	case SLIC_UPR_DUMP:
-		card->dumpstatus |= (isr & ISR_UPCMASK);
-		break;
-#endif
 	default:
 		ASSERT(0);
 	}
@@ -3434,19 +3267,6 @@ static void slic_upr_start(struct adapter *adapter)
 				 upr->upr_data, &slic_regs->slic_addr_upper,
 				 upr->upr_data_h, FLUSH);
 		break;
-#if SLIC_DUMP_ENABLED
-	case SLIC_UPR_DUMP:
-		if (upr->upr_buffer || upr->upr_buffer_h) {
-			slic_reg64_write(adapter, &slic_regs->slic_dump_data,
-					 upr->upr_buffer,
-					 &slic_regs->slic_addr_upper,
-					 upr->upr_buffer_h, FLUSH);
-		}
-		slic_reg64_write(adapter, &slic_regs->slic_dump_cmd,
-				 upr->upr_data, slic_regs->slic_addr_upper,
-				 upr->upr_data_h, FLUSH);
-		break;
-#endif
 	case SLIC_UPR_PING:
 		slic_reg32_write(&slic_regs->slic_ping, 1, FLUSH);
 		break;
@@ -4771,1030 +4591,6 @@ static void slic_debug_cleanup(void)
 	}
 }
 
-/*=============================================================================
-  =============================================================================
-  ===                                                                       ===
-  ===       SLIC  DUMP  MANAGEMENT        SECTION                           ===
-  ===                                                                       ===
-  ===                                                                       ===
-  === Dump routines                                                         ===
-  ===                                                                       ===
-  ===                                                                       ===
-  =============================================================================
-  ============================================================================*/
-
-#if SLIC_DUMP_ENABLED
-
-#include <stdarg.h>
-
-void *slic_dump_handle;		/* thread handle */
-
-/*
- * These are the only things you should do on a core-file: use only these
- * functions to write out all the necessary info.
- */
-static int slic_dump_seek(struct file *SLIChandle, u32 file_offset)
-{
-	if (SLIChandle->f_pos != file_offset) {
-		/*DBG_MSG("slic_dump_seek  now needed [%x : %x]\n",
-			(u32)SLIChandle->f_pos, (u32)file_offset); */
-		if (SLIChandle->f_op->llseek) {
-			if (SLIChandle->f_op->
-			    llseek(SLIChandle, file_offset, 0) != file_offset)
-				return 0;
-		} else {
-			SLIChandle->f_pos = file_offset;
-		}
-	}
-	return 1;
-}
-
-static int slic_dump_write(struct sliccard *card,
-			   const void *addr, int size, u32 file_offset)
-{
-	int r = 1;
-	u32 result = 0;
-	struct file *SLIChandle = card->dumphandle;
-
-#ifdef HISTORICAL		/* legacy */
-	down(&SLIChandle->f_dentry->d_inode->i_sem);
-#endif
-	if (size) {
-		slic_dump_seek(SLIChandle, file_offset);
-
-		result =
-		    SLIChandle->f_op->write(SLIChandle, addr, size,
-					    &SLIChandle->f_pos);
-
-		r = result == size;
-	}
-
-	card->dumptime_complete = jiffies;
-	card->dumptime_delta = card->dumptime_complete - card->dumptime_start;
-	card->dumptime_start = jiffies;
-
-#ifdef HISTORICAL
-	up(&SLIChandle->f_dentry->d_inode->i_sem);
-#endif
-	if (!r) {
-		DBG_ERROR("%s: addr[%p] size[%x] result[%x] file_offset[%x]\n",
-			  __func__, addr, size, result, file_offset);
-	}
-	return r;
-}
-
-static uint slic_init_dump_thread(struct sliccard *card)
-{
-	card->dump_task_id = kthread_run(slic_dump_thread, (void *)card, 0);
-
-/*  DBG_MSG("create slic_dump_thread dump_pid[%x]\n", card->dump_pid); */
-	if (IS_ERR(card->dump_task_id)) {
-		DBG_MSG("create slic_dump_thread FAILED \n");
-		return STATUS_FAILURE;
-	}
-
-	return STATUS_SUCCESS;
-}
-
-static int slic_dump_thread(void *context)
-{
-	struct sliccard *card = (struct sliccard *)context;
-	struct adapter *adapter;
-	struct adapter *dump_adapter = NULL;
-	u32 dump_complete = 0;
-	u32 delay = (PING_TIMER_INTERVAL * HZ);
-	struct slic_regs *pregs;
-	u32 i;
-	struct slic_upr *upr, *uprnext;
-	u32 dump_card;
-
-	ASSERT(card);
-
-	card->dumpthread_running = 1;
-
-#ifdef HISTORICAL
-	lock_kernel();
-	/*
-	 * This thread doesn't need any user-level access,
-	 * so get rid of all our resources
-	 */
-	exit_files(current);	/* daemonize doesn't do exit_files */
-	current->files = init_task.files;
-	atomic_inc(&current->files->count);
-#endif
-
-	daemonize("%s", "slicmon");
-
-	/* Setup a nice name */
-	strcpy(current->comm, "slicmon");
-	DBG_ERROR
-	    ("slic_dump_thread[slicmon] daemon is alive card[%p] pid[%x]\n",
-	     card, card->dump_task_id->pid);
-
-	/*
-	 *    Send me a signal to get me to die (for debugging)
-	 */
-	do {
-		/*
-		 * If card state is not set to up, skip
-		 */
-		if (card->state != CARD_UP) {
-			if (card->adapters_activated)
-				goto wait;
-			else
-				goto end_thread;
-		}
-		/*
-		 *    Check the results of our last ping.
-		 */
-		dump_card = 0;
-#ifdef SLIC_FAILURE_DUMP
-		if (card->pingstatus != ISR_PINGMASK) {
-			DBG_MSG
-			    ("\n[slicmon]  CARD #%d TIMED OUT - status "
-			     "%x: DUMP THE CARD!\n",
-			     card->cardnum, card->pingstatus);
-			dump_card = 1;
-		}
-#else
-		/*
-		 *  Cause a card RESET instead?
-		 */
-		if (card->pingstatus != ISR_PINGMASK) {
-			/* todo. do we want to reset the card in production */
-			/* DBG_MSG("\n[slicmon]  CARD #%d TIMED OUT - "
-			   status %x: RESET THE CARD!\n", card->cardnum,
-			   card->pingstatus); */
-			DBG_ERROR
-			    ("\n[slicmon]  CARD #%d TIMED OUT - status %x: "
-			     "DUMP THE CARD!\n",
-			     card->cardnum, card->pingstatus);
-			dump_card = 1;
-		}
-#endif
-		if ((dump_card)
-		    || (card->dump_requested == SLIC_DUMP_REQUESTED)) {
-			if (card->dump_requested == SLIC_DUMP_REQUESTED) {
-				DBG_ERROR
-			    ("[slicmon]: Dump card Requested: Card %x\n",
-				     card->cardnum);
-			}
-			if (card->pingstatus != ISR_PINGMASK) {
-				ushort cpuid = 0;
-				ushort crashpc = 0;
-
-				if (card->adapter[0]) {
-					if ((card->adapter[0])->memorylength >=
-					    CRASH_INFO_OFFSET +
-					    sizeof(slic_crash_info)) {
-						char *crashptr;
-						p_slic_crash_info crashinfo;
-
-						crashptr =
-						    ((char *)card->adapter[0]->
-						     slic_regs) +
-						    CRASH_INFO_OFFSET;
-						crashinfo =
-						    (p_slic_crash_info)
-						    crashptr;
-						cpuid = crashinfo->cpu_id;
-						crashpc = crashinfo->crash_pc;
-					}
-				}
-				DBG_ERROR
-				    ("[slicmon]: Dump card: Card %x crashed "
-				     "and failed to answer PING. "
-				     "CPUID[%x] PC[%x]\n ",
-				     card->cardnum, cpuid, crashpc);
-			}
-
-			card->dump_requested = SLIC_DUMP_IN_PROGRESS;
-
-			/*
-			 * Set the card state to DOWN and the adapter states
-			 * to RESET.They will check this in SimbaCheckForHang
-			 * and initiate interface reset (which in turn will
-			 * reinitialize the card).
-			 */
-			card->state = CARD_DOWN;
-
-			for (i = 0; i < card->card_size; i++) {
-				adapter = card->adapter[i];
-				if (adapter) {
-					slic_if_stop_queue(adapter);
-
-					if (adapter->state == ADAPT_UP) {
-						adapter->state = ADAPT_RESET;
-						adapter->linkstate = LINK_DOWN;
-						DBG_ERROR
-						    ("[slicmon]: SLIC Card[%d] "
-						     "Port[%d] adapter[%p] "
-						     "down\n",
-						     (uint) card->cardnum,
-						     (uint) i, adapter);
-					}
-#if SLIC_GET_STATS_TIMER_ENABLED
-					/* free stats timer */
-					if (adapter->statstimerset) {
-						adapter->statstimerset = 0;
-						del_timer(&adapter->statstimer);
-					}
-#endif
-				}
-			}
-
-			for (i = 0; i < card->card_size; i++) {
-				adapter = card->adapter[i];
-				if ((adapter) && (adapter->activated)) {
-					pregs = adapter->slic_regs;
-					dump_adapter = adapter;
-
-					/*
-					 * If the dump status is zero, then
-					 * the utility processor has crashed.
-					 * If this is the case, any pending
-					 * utilityprocessor requests will not
-					 * complete and our dump commands will
-					 * not be issued.
-					 *
-					 * To avoid this we will clear any
-					 * pending utility processor requests
-					 * now.
-					 */
-					if (!card->pingstatus) {
-						spin_lock_irqsave(
-						    &adapter->upr_lock.lock,
-						    adapter->upr_lock.flags);
-						upr = adapter->upr_list;
-						while (upr) {
-							uprnext = upr->next;
-							kfree(upr);
-							upr = uprnext;
-						}
-						adapter->upr_list = 0;
-						adapter->upr_busy = 0;
-						spin_unlock_irqrestore(
-						    &adapter->upr_lock.lock,
-						    adapter->upr_lock.flags);
-					}
-
-					slic_dump_card(card, false);
-					dump_complete = 1;
-				}
-
-				if (dump_complete) {
-					DBG_ERROR("SLIC Dump Complete\n");
-					/*  Only dump the card one time */
-					break;
-				}
-			}
-
-			if (dump_adapter) {
-				DBG_ERROR
-				    ("slic dump completed. "
-				     "Reenable interfaces\n");
-				slic_card_init(card, dump_adapter);
-
-				/*
-				 *  Reenable the adapters that were reset
-				 */
-				for (i = 0; i < card->card_size; i++) {
-					adapter = card->adapter[i];
-					if (adapter) {
-						if (adapter->state ==
-						    ADAPT_RESET) {
-							DBG_ERROR
-							    ("slicdump: SLIC "
-					   "Card[%d] Port[%d] adapter[%p] "
-					   "bring UP\n",
-							     (uint) card->
-							     cardnum, (uint) i,
-							     adapter);
-							adapter->state =
-							    ADAPT_DOWN;
-							adapter->linkstate =
-							    LINK_DOWN;
-							slic_entry_open
-							    (adapter->netdev);
-						}
-					}
-				}
-
-				card->dump_requested = SLIC_DUMP_DONE;
-			}
-		} else {
-		/* if pingstatus != ISR_PINGMASK) || dump_requested...ELSE
-		 *    We received a valid ping response.
-		 *    Clear the Pingstatus field, find a valid adapter
-		 *    structure and send another ping.
-		 */
-			for (i = 0; i < card->card_size; i++) {
-				adapter = card->adapter[i];
-				if (adapter && (adapter->state == ADAPT_UP)) {
-					card->pingstatus = 0;
-					slic_upr_request(adapter, SLIC_UPR_PING,
-							 0, 0, 0, 0);
-					break;	/* Only issue one per card */
-				}
-			}
-		}
-wait:
-		SLIC_INTERRUPTIBLE_SLEEP_ON_TIMEOUT(card->dump_wq, delay);
-	} while (!signal_pending(current));
-
-end_thread:
-/*  DBG_MSG("[slicmon] slic_dump_thread card[%p] pid[%x] ENDING\n",
-    card, card->dump_pid); */
-	card->dumpthread_running = 0;
-
-	return 0;
-}
-
-/*
- * Read a single byte from our dump index file.  This
- * value is used as our suffix for our dump path.  The
- * value is incremented and written back to the file
- */
-static unsigned char slic_get_dump_index(char *path)
-{
-	unsigned char index = 0;
-#ifdef SLIC_DUMP_INDEX_SUPPORT
-	u32 status;
-	void *FileHandle;
-	u32 offset;
-
-	offset = 0;
-
-	/*
-	 * Open the index file.  If one doesn't exist, create it
-	 */
-	status = create_file(&FileHandle);
-
-	if (status != STATUS_SUCCESS)
-		return (unsigned char) 0;
-
-	status = read_file(FileHandle, &index, 1, &offset);
-
-	index++;
-
-	status = write_file(FileHandle, &index, 1, &offset);
-
-	close_file(FileHandle);
-#else
-	index = 0;
-#endif
-	return index;
-}
-
-static struct file *slic_dump_open_file(struct sliccard *card)
-{
-	struct file *SLIChandle = NULL;
-	struct dentry *dentry = NULL;
-	struct inode *inode = NULL;
-	char SLICfile[50];
-
-	card->dumpfile_fs = get_fs();
-
-	set_fs(KERNEL_DS);
-
-	memset(SLICfile, 0, sizeof(SLICfile));
-	sprintf(SLICfile, "/var/tmp/slic%d-dump-%d", card->cardnum,
-		(uint) card->dump_count);
-	card->dump_count++;
-
-	SLIChandle =
-	    filp_open(SLICfile, O_CREAT | O_RDWR | O_SYNC | O_LARGEFILE, 0666);
-
-	DBG_MSG("[slicmon]: Dump Card #%d to file: %s \n", card->cardnum,
-		SLICfile);
-
-/*  DBG_MSG("[slicmon] filp_open %s SLIChandle[%p]\n", SLICfile, SLIChandle);*/
-
-	if (IS_ERR(SLIChandle))
-		goto end_slicdump;
-
-	dentry = SLIChandle->f_dentry;
-	inode = dentry->d_inode;
-
-/*  DBG_MSG("[slicmon] inode[%p] i_nlink[%x] i_mode[%x] i_op[%p] i_fop[%p]\n"
-		"f_op->write[%p]\n",
-		inode, inode->i_nlink, inode->i_mode, inode->i_op,
-		inode->i_fop, SLIChandle->f_op->write); */
-	if (inode->i_nlink > 1)
-		goto close_slicdump;	/* multiple links - don't dump */
-#ifdef HISTORICAL
-	if (!S_ISREG(inode->i_mode))
-		goto close_slicdump;
-#endif
-	if (!inode->i_op || !inode->i_fop)
-		goto close_slicdump;
-
-	if (!SLIChandle->f_op->write)
-		goto close_slicdump;
-
-	/*
-	 *  If we got here we have SUCCESSFULLY OPENED the dump file
-	 */
-/*  DBG_MSG("opened %s SLIChandle[%p]\n", SLICfile, SLIChandle); */
-	return SLIChandle;
-
-close_slicdump:
-	DBG_MSG("[slicmon] slic_dump_open_file failed close SLIChandle[%p]\n",
-		SLIChandle);
-	filp_close(SLIChandle, NULL);
-
-end_slicdump:
-	set_fs(card->dumpfile_fs);
-
-	return NULL;
-}
-
-static void slic_dump_close_file(struct sliccard *card)
-{
-
-/*  DBG_MSG("[slicmon] slic_dump_CLOSE_file close SLIChandle[%p]\n",
-   card->dumphandle); */
-
-	filp_close(card->dumphandle, NULL);
-
-	set_fs(card->dumpfile_fs);
-}
-
-static u32 slic_dump_card(struct sliccard *card, bool resume)
-{
-	struct adapter *adapter = card->master;
-	u32 status;
-	u32 queue;
-	u32 len, offset;
-	u32 sram_size, dram_size, regs;
-	struct sliccore_hdr corehdr;
-	u32 file_offset;
-	char *namestr;
-	u32 i;
-	u32 max_queues = 0;
-	u32 result;
-
-	card->dumphandle = slic_dump_open_file(card);
-
-	if (card->dumphandle == NULL) {
-		DBG_MSG("[slicmon] Cant create Dump file - dump failed\n");
-		return -ENOMEM;
-	}
-	if (!card->dumpbuffer) {
-		DBG_MSG("[slicmon] Insufficient memory for dump\n");
-		return -ENOMEM;
-	}
-	if (!card->cmdbuffer) {
-		DBG_MSG("[slicmon] Insufficient cmd memory for dump\n");
-		return -ENOMEM;
-	}
-
-	/*
-	 * Write the file version to the core header.
-	 */
-	namestr = slic_proc_version;
-	for (i = 0; i < (DRIVER_NAME_SIZE - 1); i++, namestr++) {
-		if (!namestr)
-			break;
-		corehdr.driver_version[i] = *namestr;
-	}
-	corehdr.driver_version[i] = 0;
-
-	file_offset = sizeof(struct sliccore_hdr);
-
-	/*
-	 * Issue the following debug commands to the SLIC:
-	 *        - Halt both receive and transmit
-	 *        - Dump receive registers
-	 *        - Dump transmit registers
-	 *        - Dump sram
-	 *        - Dump dram
-	 *        - Dump queues
-	 */
-	DBG_MSG("slicDump HALT Receive Processor\n");
-	card->dumptime_start = jiffies;
-
-	status = slic_dump_halt(card, PROC_RECEIVE);
-	if (status != STATUS_SUCCESS) {
-		DBG_ERROR
-		    ("Cant halt receive sequencer - dump failed status[%x]\n",
-		     status);
-		goto done;
-	}
-
-	DBG_MSG("slicDump HALT Transmit Processor\n");
-	status = slic_dump_halt(card, PROC_TRANSMIT);
-	if (status != STATUS_SUCCESS) {
-		DBG_ERROR("Cant halt transmit sequencer - dump failed\n");
-		goto done;
-	}
-
-	/* Dump receive regs */
-	status = slic_dump_reg(card, PROC_RECEIVE);
-	if (status != STATUS_SUCCESS) {
-		DBG_ERROR("Cant dump receive registers - dump failed\n");
-		goto done;
-	}
-
-	DBG_MSG("slicDump Write Receive REGS len[%x] offset[%x]\n",
-		(SLIC_NUM_REG * 4), file_offset);
-
-	result =
-	    slic_dump_write(card, card->dumpbuffer, SLIC_NUM_REG * 4,
-			    file_offset);
-	if (!result) {
-		DBG_ERROR
-		    ("Cant write rcv registers to dump file - dump failed\n");
-		goto done;
-	}
-
-	corehdr.RcvRegOff = file_offset;
-	corehdr.RcvRegsize = SLIC_NUM_REG * 4;
-	file_offset += SLIC_NUM_REG * 4;
-
-	/* Dump transmit regs */
-	status = slic_dump_reg(card, PROC_TRANSMIT);
-	if (status != STATUS_SUCCESS) {
-		DBG_ERROR("Cant dump transmit registers - dump failed\n");
-		goto done;
-	}
-
-	DBG_MSG("slicDump Write XMIT REGS len[%x] offset[%x]\n",
-		(SLIC_NUM_REG * 4), file_offset);
-
-	result =
-	    slic_dump_write(card, card->dumpbuffer, SLIC_NUM_REG * 4,
-			    file_offset);
-	if (!result) {
-		DBG_ERROR
-		    ("Cant write xmt registers to dump file - dump failed\n");
-		goto done;
-	}
-
-	corehdr.XmtRegOff = file_offset;
-	corehdr.XmtRegsize = SLIC_NUM_REG * 4;
-	file_offset += SLIC_NUM_REG * 4;
-
-	regs = SLIC_GBMAX_REG;
-
-	corehdr.FileRegOff = file_offset;
-	corehdr.FileRegsize = regs * 4;
-
-	for (offset = 0; regs;) {
-		len = MIN(regs, 16);	/* Can only xfr 16 regs at a time */
-
-		status = slic_dump_data(card, offset, (ushort) len, DESC_RFILE);
-
-		if (status != STATUS_SUCCESS) {
-			DBG_ERROR("Cant dump register file - dump failed\n");
-			goto done;
-		}
-
-		DBG_MSG("slicDump Write RegisterFile len[%x] offset[%x]\n",
-			(len * 4), file_offset);
-
-		result =
-		    slic_dump_write(card, card->dumpbuffer, len * 4,
-				    file_offset);
-		if (!result) {
-			DBG_ERROR
-			    ("Cant write register file to dump file - "
-			     "dump failed\n");
-			goto done;
-		}
-
-		file_offset += len * 4;
-		offset += len;
-		regs -= len;
-	}
-
-	dram_size = card->config.DramSize * 0x10000;
-
-	switch (adapter->devid) {
-	case SLIC_2GB_DEVICE_ID:
-		sram_size = SLIC_SRAM_SIZE2GB;
-		break;
-	case SLIC_1GB_DEVICE_ID:
-		sram_size = SLIC_SRAM_SIZE1GB;
-		break;
-	default:
-		sram_size = 0;
-		ASSERT(0);
-		break;
-	}
-
-	corehdr.SramOff = file_offset;
-	corehdr.Sramsize = sram_size;
-
-	for (offset = 0; sram_size;) {
-		len = MIN(sram_size, DUMP_BUF_SIZE);
-		status = slic_dump_data(card, offset, (ushort) len, DESC_SRAM);
-		if (status != STATUS_SUCCESS) {
-			DBG_ERROR
-			    ("[slicmon] Cant dump SRAM at offset %x - "
-			     "dump failed\n", (uint) offset);
-			goto done;
-		}
-
-		DBG_MSG("[slicmon] slicDump Write SRAM  len[%x] offset[%x]\n",
-			len, file_offset);
-
-		result =
-		    slic_dump_write(card, card->dumpbuffer, len, file_offset);
-		if (!result) {
-			DBG_ERROR
-			    ("[slicmon] Cant write SRAM to dump file - "
-			     "dump failed\n");
-			goto done;
-		}
-
-		file_offset += len;
-		offset += len;
-		sram_size -= len;
-	}
-
-	corehdr.DramOff = file_offset;
-	corehdr.Dramsize = dram_size;
-
-	for (offset = 0; dram_size;) {
-		len = MIN(dram_size, DUMP_BUF_SIZE);
-
-		status = slic_dump_data(card, offset, (ushort) len, DESC_DRAM);
-		if (status != STATUS_SUCCESS) {
-			DBG_ERROR
-			    ("[slicmon] Cant dump dram at offset %x - "
-			     "dump failed\n", (uint) offset);
-			goto done;
-		}
-
-		DBG_MSG("slicDump Write DRAM  len[%x] offset[%x]\n", len,
-			file_offset);
-
-		result =
-		    slic_dump_write(card, card->dumpbuffer, len, file_offset);
-		if (!result) {
-			DBG_ERROR
-			    ("[slicmon] Cant write DRAM to dump file - "
-			     "dump failed\n");
-			goto done;
-		}
-
-		file_offset += len;
-		offset += len;
-		dram_size -= len;
-	}
-
-	max_queues = SLIC_MAX_QUEUE;
-
-	for (queue = 0; queue < max_queues; queue++) {
-		u32 *qarray = (u32 *) card->dumpbuffer;
-		u32 qarray_physl = card->dumpbuffer_physl;
-		u32 qarray_physh = card->dumpbuffer_physh;
-		u32 qstart;
-		u32 qdelta;
-		u32 qtotal = 0;
-
-		DBG_MSG("[slicmon] Start Dump of QUEUE #0x%x\n", (uint) queue);
-
-		for (offset = 0; offset < (DUMP_BUF_SIZE >> 2); offset++) {
-			qstart = jiffies;
-			qdelta = 0;
-
-			status = slic_dump_queue(card,
-						 qarray_physl,
-						 qarray_physh, queue);
-			qarray_physl += 4;
-
-			if (status != STATUS_SUCCESS)
-				break;
-
-			if (jiffies > qstart) {
-				qdelta = jiffies - qstart;
-				qtotal += qdelta;
-			}
-		}
-
-		if (offset)
-			qdelta = qtotal / offset;
-		else
-			qdelta = 0;
-
-/*        DBG_MSG("   slicDump Write QUEUE #0x%x len[%x] offset[%x] "
-		"avgjiffs[%x]\n", queue, (offset*4), file_offset, qdelta); */
-
-		result =
-		    slic_dump_write(card, card->dumpbuffer, offset * 4,
-				    file_offset);
-
-		if (!result) {
-			DBG_ERROR
-			    ("[slicmon] Cant write QUEUES to dump file - "
-			     "dump failed\n");
-			goto done;
-		}
-
-		corehdr.queues[queue].queueOff = file_offset;
-		corehdr.queues[queue].queuesize = offset * 4;
-		file_offset += offset * 4;
-
-/*      DBG_MSG("    Reload QUEUE #0x%x elements[%x]\n", (uint)queue, offset);*/
-		/*
-		 * Fill the queue back up
-		 */
-		for (i = 0; i < offset; i++) {
-			qstart = jiffies;
-			qdelta = 0;
-
-			status = slic_dump_load_queue(card, qarray[i], queue);
-			if (status != STATUS_SUCCESS)
-				break;
-
-			if (jiffies > qstart) {
-				qdelta = jiffies - qstart;
-				qtotal += qdelta;
-			}
-		}
-
-		if (offset)
-			qdelta = qtotal / offset;
-		else
-			qdelta = 0;
-
-/*      DBG_MSG("   Reload DONE avgjiffs[%x]\n", qdelta); */
-
-		resume = 1;
-	}
-
-	len = SLIC_GB_CAMAB_SZE * 4;
-	status = slic_dump_cam(card, 0, len, DUMP_CAM_A);
-	if (status != STATUS_SUCCESS) {
-		DBG_ERROR("[slicmon] Can't dump CAM_A - dump failed\n");
-		goto done;
-	}
-
-	result = slic_dump_write(card, card->dumpbuffer, len, file_offset);
-	if (result) {
-		DBG_ERROR
-		    ("[slicmon] Can't write CAM_A data to dump file - "
-		     "dump failed\n");
-		goto done;
-	}
-	corehdr.CamAMOff = file_offset;
-	corehdr.CamASize = len;
-	file_offset += len;
-
-	len = SLIC_GB_CAMCD_SZE * 4;
-	status = slic_dump_cam(card, 0, len, DUMP_CAM_C);
-	if (status) {
-		DBG_ERROR("[slicmon] Can't dump CAM_C - dump failed\n");
-		goto done;
-	}
-
-	result = slic_dump_write(card, card->dumpbuffer, len, file_offset);
-	if (result) {
-		DBG_ERROR
-		    ("[slicmon] Can't write CAM_C data to dump file - "
-		     "dump failed\n");
-		goto done;
-	}
-	corehdr.CamCMOff = file_offset;
-	corehdr.CamCSize = len;
-	file_offset += len;
-
-done:
-	/*
-	 * Write out the core header
-	 */
-	file_offset = 0;
-	DBG_MSG("[slicmon] Write CoreHeader len[%x] offset[%x]\n",
-		(uint) sizeof(struct sliccore_hdr), file_offset);
-
-	result =
-	    slic_dump_write(card, &corehdr, sizeof(struct sliccore_hdr),
-			    file_offset);
-	DBG_MSG("[slicmon] corehdr  xoff[%x] xsz[%x]\n"
-		"    roff[%x] rsz[%x] fileoff[%x] filesz[%x]\n"
-		"    sramoff[%x] sramsz[%x], dramoff[%x] dramsz[%x]\n"
-		"    corehdr_offset[%x]\n", corehdr.XmtRegOff,
-		corehdr.XmtRegsize, corehdr.RcvRegOff, corehdr.RcvRegsize,
-		corehdr.FileRegOff, corehdr.FileRegsize, corehdr.SramOff,
-		corehdr.Sramsize, corehdr.DramOff, corehdr.Dramsize,
-		(uint) sizeof(struct sliccore_hdr));
-	for (i = 0; i < max_queues; i++) {
-		DBG_MSG("[slicmon]  QUEUE 0x%x  offset[%x] size[%x]\n",
-			(uint) i, corehdr.queues[i].queueOff,
-			corehdr.queues[i].queuesize);
-
-	}
-
-	slic_dump_close_file(card);
-
-	if (resume) {
-		DBG_MSG("slicDump RESTART RECEIVE and XMIT PROCESSORS\n\n");
-		slic_dump_resume(card, PROC_RECEIVE);
-		slic_dump_resume(card, PROC_TRANSMIT);
-	}
-
-	return status;
-}
-
-static u32 slic_dump_halt(struct sliccard *card, unsigned char proc)
-{
-	unsigned char *cmd = card->cmdbuffer;
-
-	*cmd = COMMAND_BYTE(CMD_HALT, 0, proc);
-
-	return slic_dump_send_cmd(card,
-				   card->cmdbuffer_physl,
-				   card->cmdbuffer_physh, 0, 0);
-}
-
-static u32 slic_dump_resume(struct sliccard *card, unsigned char proc)
-{
-	unsigned char *cmd = card->cmdbuffer;
-
-	*cmd = COMMAND_BYTE(CMD_RUN, 0, proc);
-
-	return slic_dump_send_cmd(card,
-				   card->cmdbuffer_physl,
-				   card->cmdbuffer_physh, 0, 0);
-}
-
-static u32 slic_dump_reg(struct sliccard *card, unsigned char proc)
-{
-	struct dump_cmd *dump = (struct dump_cmd *)card->cmdbuffer;
-
-	dump->cmd = COMMAND_BYTE(CMD_DUMP, 0, proc);
-	dump->desc = DESC_REG;
-	dump->count = 0;
-	dump->addr = 0;
-
-	return slic_dump_send_cmd(card,
-				   card->cmdbuffer_physl,
-				   card->cmdbuffer_physh,
-				   card->dumpbuffer_physl,
-				   card->dumpbuffer_physh);
-}
-
-static u32 slic_dump_data(struct sliccard *card,
-		       u32 addr, ushort count, unsigned char desc)
-{
-	struct dump_cmd *dump = (struct dump_cmd *)card->cmdbuffer;
-
-	dump->cmd = COMMAND_BYTE(CMD_DUMP, 0, PROC_RECEIVE);
-	dump->desc = desc;
-	dump->count = count;
-	dump->addr = addr;
-
-	return slic_dump_send_cmd(card,
-				   card->cmdbuffer_physl,
-				   card->cmdbuffer_physh,
-				   card->dumpbuffer_physl,
-				   card->dumpbuffer_physh);
-}
-
-static u32 slic_dump_queue(struct sliccard *card,
-			u32 addr, u32 buf_physh, u32 queue)
-{
-	struct dump_cmd *dump = (struct dump_cmd *)card->cmdbuffer;
-
-	dump->cmd = COMMAND_BYTE(CMD_DUMP, 0, PROC_RECEIVE);
-	dump->desc = DESC_QUEUE;
-	dump->count = 1;
-	dump->addr = queue;
-
-	return slic_dump_send_cmd(card,
-				   card->cmdbuffer_physl,
-				   card->cmdbuffer_physh,
-				   addr, card->dumpbuffer_physh);
-}
-
-static u32 slic_dump_load_queue(struct sliccard *card, u32 data,
-				u32 queue)
-{
-	struct dump_cmd *load = (struct dump_cmd *) card->cmdbuffer;
-
-	load->cmd = COMMAND_BYTE(CMD_LOAD, 0, PROC_RECEIVE);
-	load->desc = DESC_QUEUE;
-	load->count = (ushort) queue;
-	load->addr = data;
-
-	return slic_dump_send_cmd(card,
-				   card->cmdbuffer_physl,
-				   card->cmdbuffer_physh, 0, 0);
-}
-
-static u32 slic_dump_cam(struct sliccard *card,
-		      u32 addr, u32 count, unsigned char desc)
-{
-	struct dump_cmd *dump = (struct dump_cmd *)card->cmdbuffer;
-
-	dump->cmd = COMMAND_BYTE(CMD_CAM_OPS, 0, PROC_NONE);
-	dump->desc = desc;
-	dump->count = count;
-	dump->addr = 0;
-
-	return slic_dump_send_cmd(card,
-				   card->cmdbuffer_physl,
-				   card->cmdbuffer_physh,
-				   addr, card->dumpbuffer_physh);
-}
-
-static u32 slic_dump_send_cmd(struct sliccard *card,
-			   u32 cmd_physl,
-			   u32 cmd_physh,
-			   u32 buf_physl, u32 buf_physh)
-{
-	ulong timeout = msecs_to_jiffies(500);	/* 500 msec */
-	u32 attempts = 5;
-	u32 delay = msecs_to_jiffies(10);	/* 10 msec */
-	struct adapter *adapter = card->master;
-
-	ASSERT(adapter);
-	do {
-		/*
-		 * Zero the Dumpstatus field of the adapter structure
-		 */
-		card->dumpstatus = 0;
-		/*
-		 * Issue the dump command via a utility processor request.
-		 *
-		 * Kludge: We use the Informationbuffer parameter to hold
-		 * the buffer address
-		 */
-		slic_upr_request(adapter, SLIC_UPR_DUMP, cmd_physl, cmd_physh,
-				 buf_physl, buf_physh);
-
-		timeout += jiffies;
-		/*
-		 * Spin until completion or timeout.
-		 */
-		while (!card->dumpstatus) {
-			int num_sleeps = 0;
-
-			if (jiffies > timeout) {
-				/*
-				 *  Complete the timed-out DUMP UPR request.
-				 */
-				slic_upr_request_complete(adapter, 0);
-				DBG_ERROR
-				    ("%s: TIMED OUT num_sleeps[%x] "
-				     "status[%x]\n",
-				     __func__, num_sleeps, STATUS_FAILURE);
-
-				return STATUS_FAILURE;
-			}
-			num_sleeps++;
-			SLIC_INTERRUPTIBLE_SLEEP_ON_TIMEOUT(card->dump_wq,
-							    delay);
-		}
-
-		if (card->dumpstatus & ISR_UPCERR) {
-			/*
-			 * Error (or queue empty)
-			 */
-/*          DBG_ERROR("[slicmon] %s: DUMP_STATUS & ISR_UPCERR status[%x]\n",
-		__func__, STATUS_FAILURE); */
-
-			return STATUS_FAILURE;
-		} else if (card->dumpstatus & ISR_UPCBSY) {
-			/*
-			 * Retry
-			 */
-			DBG_ERROR("%s: ISR_UPCBUSY attempt[%x]\n", __func__,
-				  attempts);
-
-			attempts--;
-		} else {
-			/*
-			 * success
-			 */
-			return STATUS_SUCCESS;
-		}
-
-	} while (attempts);
-
-	DBG_ERROR("%s: GAVE UP AFTER SEVERAL ATTEMPTS status[%x]\n",
-		  __func__, STATUS_FAILURE);
-
-	/*
-	 * Gave up after several attempts
-	 */
-	return STATUS_FAILURE;
-}
-
-#endif
-/*=============================================================================
-  =============================================================================
-  ===                                                                       ===
-  ===      *** END **** END **** END **** END ***                           ===
-  ===       SLIC  DUMP  MANAGEMENT        SECTION                           ===
-  ===                                                                       ===
-  ===                                                                       ===
-  ===                                                                       ===
-  =============================================================================
-  ============================================================================*/
-
 /******************************************************************************/
 /****************   MODULE INITIATION / TERMINATION FUNCTIONS   ***************/
 /******************************************************************************/