Staging: add w35und wifi driver

This is driver for w35und usb wifi -- also in kohjinsha
subnotebook. It should work well enough to associate and ping, but it
obviously needs to be rewritten two more times...

OTOH worst horrors (like embedded wifi stack) should have been fixed
already...

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 122 insertions, 0 deletions

diff --git a/drivers/staging/winbond/wbhal_f.h b/drivers/staging/winbond/wbhal_f.h
new file mode 100644
index 00000000000..fe25f97af72
--- /dev/null
+++ b/drivers/staging/winbond/wbhal_f.h
@@ -0,0 +1,122 @@
+//=====================================================================
+// Device related include
+//=====================================================================
+#ifdef WB_LINUX
+	#include "linux/wbusb_f.h"
+	#include "linux/wb35reg_f.h"
+	#include "linux/wb35tx_f.h"
+	#include "linux/wb35rx_f.h"
+#else
+	#include "wbusb_f.h"
+	#include "wb35reg_f.h"
+	#include "wb35tx_f.h"
+	#include "wb35rx_f.h"
+#endif
+
+//====================================================================================
+// Function declaration
+//====================================================================================
+void hal_remove_mapping_key(  phw_data_t pHwData,  PUCHAR pmac_addr );
+void hal_remove_default_key(  phw_data_t pHwData,  u32 index );
+unsigned char hal_set_mapping_key(  phw_data_t Adapter,  PUCHAR pmac_addr,  u8 null_key,  u8 wep_on,  PUCHAR ptx_tsc,  PUCHAR prx_tsc,  u8 key_type,  u8 key_len,  PUCHAR pkey_data );
+unsigned char hal_set_default_key(  phw_data_t Adapter,  u8 index,  u8 null_key,  u8 wep_on,  PUCHAR ptx_tsc,  PUCHAR prx_tsc,  u8 key_type,  u8 key_len,  PUCHAR pkey_data );
+void hal_clear_all_default_key(  phw_data_t pHwData );
+void hal_clear_all_group_key(  phw_data_t pHwData );
+void hal_clear_all_mapping_key(  phw_data_t pHwData );
+void hal_clear_all_key(  phw_data_t pHwData );
+void hal_get_ethernet_address(  phw_data_t pHwData,  PUCHAR current_address );
+void hal_set_ethernet_address(  phw_data_t pHwData,  PUCHAR current_address );
+void hal_get_permanent_address(  phw_data_t pHwData,  PUCHAR pethernet_address );
+unsigned char hal_init_hardware(  phw_data_t pHwData,  PADAPTER Adapter );
+void hal_set_power_save_mode(  phw_data_t pHwData,  unsigned char power_save,  unsigned char wakeup,  unsigned char dtim );
+void hal_get_power_save_mode(  phw_data_t pHwData,   PBOOLEAN pin_pwr_save );
+void hal_set_slot_time(  phw_data_t pHwData,  u8 type );
+#define hal_set_atim_window( _A, _ATM )
+void hal_set_rates(  phw_data_t pHwData,  PUCHAR pbss_rates,  u8 length,  unsigned char basic_rate_set );
+#define hal_set_basic_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, TRUE )
+#define hal_set_op_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, FALSE )
+void hal_start_bss(  phw_data_t pHwData,  u8 mac_op_mode );
+void hal_join_request(  phw_data_t pHwData,  u8 bss_type ); // 0:BSS STA 1:IBSS STA//
+void hal_stop_sync_bss(  phw_data_t pHwData );
+void hal_resume_sync_bss(  phw_data_t pHwData);
+void hal_set_aid(  phw_data_t pHwData,  u16 aid );
+void hal_set_bssid(  phw_data_t pHwData,  PUCHAR pbssid );
+void hal_get_bssid(  phw_data_t pHwData,  PUCHAR pbssid );
+void hal_set_beacon_period(  phw_data_t pHwData,  u16 beacon_period );
+void hal_set_listen_interval(  phw_data_t pHwData,  u16 listen_interval );
+void hal_set_cap_info(  phw_data_t pHwData,  u16 capability_info );
+void hal_set_ssid(  phw_data_t pHwData,  PUCHAR pssid,  u8 ssid_len );
+void hal_set_current_channel(  phw_data_t pHwData,  ChanInfo channel );
+void hal_set_current_channel_ex(  phw_data_t pHwData,  ChanInfo channel );
+void hal_get_current_channel(  phw_data_t pHwData,  ChanInfo *channel );
+void hal_set_accept_broadcast(  phw_data_t pHwData,  u8 enable );
+void hal_set_accept_multicast(  phw_data_t pHwData,  u8 enable );
+void hal_set_accept_beacon(  phw_data_t pHwData,  u8 enable );
+void hal_set_multicast_address(  phw_data_t pHwData,  PUCHAR address,  u8 number );
+u8 hal_get_accept_beacon(  phw_data_t pHwData );
+void hal_stop(  phw_data_t pHwData );
+void hal_halt(  phw_data_t pHwData, void *ppa_data );
+void hal_start_tx0(  phw_data_t pHwData );
+void hal_set_phy_type(  phw_data_t pHwData,  u8 PhyType );
+void hal_get_phy_type(  phw_data_t pHwData,  u8 *PhyType );
+unsigned char hal_reset_hardware(  phw_data_t pHwData,  void* ppa );
+void hal_set_cwmin(  phw_data_t pHwData,  u8	cwin_min );
+#define hal_get_cwmin( _A ) ( (_A)->cwmin )
+void hal_set_cwmax(  phw_data_t pHwData,  u16 cwin_max );
+#define hal_get_cwmax( _A ) ( (_A)->cwmax )
+void hal_set_rsn_wpa(  phw_data_t pHwData,  u32 * RSN_IE_Bitmap , u32 * RSN_OUI_type , unsigned char bDesiredAuthMode);
+//s32 hal_get_rssi(  phw_data_t pHwData,  u32 HalRssi );
+s32 hal_get_rssi(  phw_data_t pHwData,  u32 *HalRssiArry,  u8 Count );
+s32 hal_get_rssi_bss(  phw_data_t pHwData,  u16 idx,  u8 Count );
+void hal_set_connect_info(  phw_data_t pHwData,  unsigned char boConnect );
+u8 hal_get_est_sq3(  phw_data_t pHwData,  u8 Count );
+void hal_led_control_1a(  phw_data_t pHwData );
+void hal_led_control(  void* S1,  phw_data_t pHwData,  void* S3,  void* S4 );
+void hal_set_rf_power(  phw_data_t pHwData,  u8 PowerIndex ); // 20060621 Modify
+void hal_reset_counter(  phw_data_t pHwData );
+void hal_set_radio_mode(  phw_data_t pHwData,  unsigned char boValue);
+void hal_descriptor_indicate(  phw_data_t pHwData,  PDESCRIPTOR pDes );
+u8 hal_get_antenna_number(  phw_data_t pHwData );
+void hal_set_antenna_number(  phw_data_t pHwData, u8 number );
+u32 hal_get_bss_pk_cnt(  phw_data_t pHwData );
+#define hal_get_region_from_EEPROM( _A ) ( (_A)->Wb35Reg.EEPROMRegion )
+void hal_set_accept_promiscuous		(  phw_data_t pHwData,  u8 enable);
+#define hal_get_tx_buffer( _A, _B ) Wb35Tx_get_tx_buffer( _A, _B )
+u8 hal_get_hw_radio_off			(  phw_data_t pHwData );
+#define hal_software_set( _A )		(_A->SoftwareSet)
+#define hal_driver_init_OK( _A )	(_A->IsInitOK)
+#define hal_rssi_boundary_high( _A ) (_A->RSSI_high)
+#define hal_rssi_boundary_low( _A ) (_A->RSSI_low)
+#define hal_scan_interval( _A )		(_A->Scan_Interval)
+void hal_scan_status_indicate(  phw_data_t pHwData, u8 status);	// 0: complete, 1: in progress
+void hal_system_power_change(  phw_data_t pHwData, u32 PowerState ); // 20051230 -=D0 1=D1 ..
+void hal_surprise_remove(  phw_data_t pHwData );
+
+#define PHY_DEBUG( msg, args... )
+
+
+
+void hal_rate_change(  phw_data_t pHwData ); // Notify the HAL rate is changing 20060613.1
+unsigned char hal_get_dxx_reg(  phw_data_t pHwData,  u16 number,  PULONG pValue );
+unsigned char hal_set_dxx_reg(  phw_data_t pHwData,  u16 number,  u32 value );
+#define hal_get_time_count( _P )	(_P->time_count/10)	// return 100ms count
+#define hal_detect_error( _P )		(_P->WbUsb.DetectCount)
+unsigned char hal_set_LED(  phw_data_t pHwData,  u32 Mode ); // 20061108 for WPS led control
+
+//-------------------------------------------------------------------------
+// The follow function is unused for IS89C35
+//-------------------------------------------------------------------------
+#define hal_disable_interrupt(_A)
+#define hal_enable_interrupt(_A)
+#define hal_get_interrupt_type( _A)
+#define hal_get_clear_interrupt(_A)
+#define hal_ibss_disconnect(_A) hal_stop_sync_bss(_A)
+#define hal_join_request_stop(_A)
+unsigned char	hal_idle(  phw_data_t pHwData );
+#define pa_stall_execution( _A )	//OS_SLEEP( 1 )
+#define hw_get_cxx_reg( _A, _B, _C )
+#define hw_set_cxx_reg( _A, _B, _C )
+#define hw_get_dxx_reg( _A, _B, _C )	hal_get_dxx_reg( _A, _B, (PULONG)_C )
+#define hw_set_dxx_reg( _A, _B, _C )	hal_set_dxx_reg( _A, _B, (u32)_C )
+
+