Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (100 commits)
  usb-storage: revert DMA-alignment change for Wireless USB
  USB: use reset_resume when normal resume fails
  usb_gadget: composite cdc gadget fault handling
  usb gadget: minor USBCV fix for composite framework
  USB: Fix bug with byte order in isp116x-hcd.c fio write/read
  USB: fix double kfree in ipaq in error case
  USB: fix build error in cdc-acm for CONFIG_PM=n
  USB: remove board-specific UP2OCR configuration from pxa27x-udc
  USB: EHCI: Reconciling USB register differences on MPC85xx vs MPC83xx
  USB: Fix pointer/int cast in USB devio code
  usb gadget: g_cdc dependso on NET
  USB: Au1xxx-usb: suspend/resume support.
  USB: Au1xxx-usb: clean up ohci/ehci bus glue sources.
  usbfs: don't store bad pointers in registration
  usbfs: fix race between open and unregister
  usbfs: simplify the lookup-by-minor routines
  usbfs: send disconnect signals when device is unregistered
  USB: Force unbinding of drivers lacking reset_resume or other methods
  USB: ohci-pnx4008: I2C cleanups and fixes
  USB: debug port converter does not accept more than 8 byte packets
  ...

12 files changed, 541 insertions, 349 deletions

diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 83d9dc379d9..6ec38175a81 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -46,8 +46,6 @@
  * 2000-07-05: Ashley Montanaro <ashley@compsoc.man.ac.uk>
  *   Converted file reading routine to dump to buffer once
  *   per device, not per bus
- *
- * $Id: devices.c,v 1.5 2000/01/11 13:58:21 tom Exp $
  */
 
 #include <linux/fs.h>
@@ -63,8 +61,6 @@
 #include "usb.h"
 #include "hcd.h"
 
-#define MAX_TOPO_LEVEL		6
-
 /* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */
 #define ALLOW_SERIAL_NUMBER
 
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 9218cca2104..54a350ccd03 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -19,8 +19,6 @@
  *      along with this program; if not, write to the Free Software
  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- *  $Id: devio.c,v 1.7 2000/02/01 17:28:48 fliegl Exp $
- *
  *  This file implements the usbfs/x/y files, where
  *  x is the bus number and y the device number.
  *
@@ -61,6 +59,22 @@
 /* Mutual exclusion for removal, open, and release */
 DEFINE_MUTEX(usbfs_mutex);
 
+struct dev_state {
+	struct list_head list;      /* state list */
+	struct usb_device *dev;
+	struct file *file;
+	spinlock_t lock;            /* protects the async urb lists */
+	struct list_head async_pending;
+	struct list_head async_completed;
+	wait_queue_head_t wait;     /* wake up if a request completed */
+	unsigned int discsignr;
+	struct pid *disc_pid;
+	uid_t disc_uid, disc_euid;
+	void __user *disccontext;
+	unsigned long ifclaimed;
+	u32 secid;
+};
+
 struct async {
 	struct list_head asynclist;
 	struct dev_state *ps;
@@ -536,23 +550,19 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
 	return ret;
 }
 
-static int __match_minor(struct device *dev, void *data)
+static int match_devt(struct device *dev, void *data)
 {
-	int minor = *((int *)data);
-
-	if (dev->devt == MKDEV(USB_DEVICE_MAJOR, minor))
-		return 1;
-	return 0;
+	return dev->devt == (dev_t) (unsigned long) data;
 }
 
-static struct usb_device *usbdev_lookup_by_minor(int minor)
+static struct usb_device *usbdev_lookup_by_devt(dev_t devt)
 {
 	struct device *dev;
 
-	dev = bus_find_device(&usb_bus_type, NULL, &minor, __match_minor);
+	dev = bus_find_device(&usb_bus_type, NULL,
+			      (void *) (unsigned long) devt, match_devt);
 	if (!dev)
 		return NULL;
-	put_device(dev);
 	return container_of(dev, struct usb_device, dev);
 }
 
@@ -575,21 +585,27 @@ static int usbdev_open(struct inode *inode, struct file *file)
 		goto out;
 
 	ret = -ENOENT;
+
 	/* usbdev device-node */
 	if (imajor(inode) == USB_DEVICE_MAJOR)
-		dev = usbdev_lookup_by_minor(iminor(inode));
+		dev = usbdev_lookup_by_devt(inode->i_rdev);
 #ifdef CONFIG_USB_DEVICEFS
 	/* procfs file */
-	if (!dev)
+	if (!dev) {
 		dev = inode->i_private;
+		if (dev && dev->usbfs_dentry &&
+					dev->usbfs_dentry->d_inode == inode)
+			usb_get_dev(dev);
+		else
+			dev = NULL;
+	}
 #endif
-	if (!dev)
+	if (!dev || dev->state == USB_STATE_NOTATTACHED)
 		goto out;
 	ret = usb_autoresume_device(dev);
 	if (ret)
 		goto out;
 
-	usb_get_dev(dev);
 	ret = 0;
 	ps->dev = dev;
 	ps->file = file;
@@ -609,8 +625,10 @@ static int usbdev_open(struct inode *inode, struct file *file)
 	list_add_tail(&ps->list, &dev->filelist);
 	file->private_data = ps;
  out:
-	if (ret)
+	if (ret) {
 		kfree(ps);
+		usb_put_dev(dev);
+	}
 	mutex_unlock(&usbfs_mutex);
 	unlock_kernel();
 	return ret;
@@ -874,7 +892,7 @@ static int proc_connectinfo(struct dev_state *ps, void __user *arg)
 
 static int proc_resetdevice(struct dev_state *ps)
 {
-	return usb_reset_composite_device(ps->dev, NULL);
+	return usb_reset_device(ps->dev);
 }
 
 static int proc_setintf(struct dev_state *ps, void __user *arg)
@@ -1682,25 +1700,49 @@ const struct file_operations usbdev_file_operations = {
 	.release =	usbdev_release,
 };
 
+void usb_fs_classdev_common_remove(struct usb_device *udev)
+{
+	struct dev_state *ps;
+	struct siginfo sinfo;
+
+	while (!list_empty(&udev->filelist)) {
+		ps = list_entry(udev->filelist.next, struct dev_state, list);
+		destroy_all_async(ps);
+		wake_up_all(&ps->wait);
+		list_del_init(&ps->list);
+		if (ps->discsignr) {
+			sinfo.si_signo = ps->discsignr;
+			sinfo.si_errno = EPIPE;
+			sinfo.si_code = SI_ASYNCIO;
+			sinfo.si_addr = ps->disccontext;
+			kill_pid_info_as_uid(ps->discsignr, &sinfo,
+					ps->disc_pid, ps->disc_uid,
+					ps->disc_euid, ps->secid);
+		}
+	}
+}
+
 #ifdef CONFIG_USB_DEVICE_CLASS
 static struct class *usb_classdev_class;
 
 static int usb_classdev_add(struct usb_device *dev)
 {
-	int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1);
-
-	dev->usb_classdev = device_create(usb_classdev_class, &dev->dev,
-				MKDEV(USB_DEVICE_MAJOR, minor),
-				"usbdev%d.%d", dev->bus->busnum, dev->devnum);
-	if (IS_ERR(dev->usb_classdev))
-		return PTR_ERR(dev->usb_classdev);
-
+	struct device *cldev;
+
+	cldev = device_create(usb_classdev_class, &dev->dev, dev->dev.devt,
+			      "usbdev%d.%d", dev->bus->busnum,
+			      dev->devnum);
+	if (IS_ERR(cldev))
+		return PTR_ERR(cldev);
+	dev->usb_classdev = cldev;
 	return 0;
 }
 
 static void usb_classdev_remove(struct usb_device *dev)
 {
-	device_unregister(dev->usb_classdev);
+	if (dev->usb_classdev)
+		device_unregister(dev->usb_classdev);
+	usb_fs_classdev_common_remove(dev);
 }
 
 static int usb_classdev_notify(struct notifier_block *self,
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 1e56f1cfa6d..ddb54e14a5c 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -201,6 +201,7 @@ static int usb_probe_interface(struct device *dev)
 
 	intf = to_usb_interface(dev);
 	udev = interface_to_usbdev(intf);
+	intf->needs_binding = 0;
 
 	if (udev->authorized == 0) {
 		dev_err(&intf->dev, "Device is not authorized for usage\n");
@@ -257,15 +258,16 @@ static int usb_unbind_interface(struct device *dev)
 	udev = interface_to_usbdev(intf);
 	error = usb_autoresume_device(udev);
 
-	/* release all urbs for this interface */
-	usb_disable_interface(interface_to_usbdev(intf), intf);
+	/* Terminate all URBs for this interface unless the driver
+	 * supports "soft" unbinding.
+	 */
+	if (!driver->soft_unbind)
+		usb_disable_interface(udev, intf);
 
 	driver->disconnect(intf);
 
 	/* reset other interface state */
-	usb_set_interface(interface_to_usbdev(intf),
-			intf->altsetting[0].desc.bInterfaceNumber,
-			0);
+	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
 	usb_set_intfdata(intf, NULL);
 
 	intf->condition = USB_INTERFACE_UNBOUND;
@@ -310,6 +312,7 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 
 	dev->driver = &driver->drvwrap.driver;
 	usb_set_intfdata(iface, priv);
+	iface->needs_binding = 0;
 
 	usb_pm_lock(udev);
 	iface->condition = USB_INTERFACE_BOUND;
@@ -586,7 +589,7 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
 	struct usb_device *usb_dev;
 
 	/* driver is often null here; dev_dbg() would oops */
-	pr_debug("usb %s: uevent\n", dev->bus_id);
+	pr_debug("usb %s: uevent\n", dev_name(dev));
 
 	if (is_usb_device(dev))
 		usb_dev = to_usb_device(dev);
@@ -596,11 +599,11 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
 	}
 
 	if (usb_dev->devnum < 0) {
-		pr_debug("usb %s: already deleted?\n", dev->bus_id);
+		pr_debug("usb %s: already deleted?\n", dev_name(dev));
 		return -ENODEV;
 	}
 	if (!usb_dev->bus) {
-		pr_debug("usb %s: bus removed?\n", dev->bus_id);
+		pr_debug("usb %s: bus removed?\n", dev_name(dev));
 		return -ENODEV;
 	}
 
@@ -771,6 +774,104 @@ void usb_deregister(struct usb_driver *driver)
 }
 EXPORT_SYMBOL_GPL(usb_deregister);
 
+
+/* Forced unbinding of a USB interface driver, either because
+ * it doesn't support pre_reset/post_reset/reset_resume or
+ * because it doesn't support suspend/resume.
+ *
+ * The caller must hold @intf's device's lock, but not its pm_mutex
+ * and not @intf->dev.sem.
+ */
+void usb_forced_unbind_intf(struct usb_interface *intf)
+{
+	struct usb_driver *driver = to_usb_driver(intf->dev.driver);
+
+	dev_dbg(&intf->dev, "forced unbind\n");
+	usb_driver_release_interface(driver, intf);
+
+	/* Mark the interface for later rebinding */
+	intf->needs_binding = 1;
+}
+
+/* Delayed forced unbinding of a USB interface driver and scan
+ * for rebinding.
+ *
+ * The caller must hold @intf's device's lock, but not its pm_mutex
+ * and not @intf->dev.sem.
+ *
+ * FIXME: The caller must block system sleep transitions.
+ */
+void usb_rebind_intf(struct usb_interface *intf)
+{
+	int rc;
+
+	/* Delayed unbind of an existing driver */
+	if (intf->dev.driver) {
+		struct usb_driver *driver =
+				to_usb_driver(intf->dev.driver);
+
+		dev_dbg(&intf->dev, "forced unbind\n");
+		usb_driver_release_interface(driver, intf);
+	}
+
+	/* Try to rebind the interface */
+	intf->needs_binding = 0;
+	rc = device_attach(&intf->dev);
+	if (rc < 0)
+		dev_warn(&intf->dev, "rebind failed: %d\n", rc);
+}
+
+#define DO_UNBIND	0
+#define DO_REBIND	1
+
+/* Unbind drivers for @udev's interfaces that don't support suspend/resume,
+ * or rebind interfaces that have been unbound, according to @action.
+ *
+ * The caller must hold @udev's device lock.
+ * FIXME: For rebinds, the caller must block system sleep transitions.
+ */
+static void do_unbind_rebind(struct usb_device *udev, int action)
+{
+	struct usb_host_config	*config;
+	int			i;
+	struct usb_interface	*intf;
+	struct usb_driver	*drv;
+
+	config = udev->actconfig;
+	if (config) {
+		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+			intf = config->interface[i];
+			switch (action) {
+			case DO_UNBIND:
+				if (intf->dev.driver) {
+					drv = to_usb_driver(intf->dev.driver);
+					if (!drv->suspend || !drv->resume)
+						usb_forced_unbind_intf(intf);
+				}
+				break;
+			case DO_REBIND:
+				if (intf->needs_binding) {
+
+	/* FIXME: The next line is needed because we are going to probe
+	 * the interface, but as far as the PM core is concerned the
+	 * interface is still suspended.  The problem wouldn't exist
+	 * if we could rebind the interface during the interface's own
+	 * resume() call, but at the time the usb_device isn't locked!
+	 *
+	 * The real solution will be to carry this out during the device's
+	 * complete() callback.  Until that is implemented, we have to
+	 * use this hack.
+	 */
+//					intf->dev.power.sleeping = 0;
+
+					usb_rebind_intf(intf);
+				}
+				break;
+			}
+		}
+	}
+}
+
 #ifdef CONFIG_PM
 
 /* Caller has locked udev's pm_mutex */
@@ -805,8 +906,6 @@ static int usb_resume_device(struct usb_device *udev)
 
 	if (udev->state == USB_STATE_NOTATTACHED)
 		goto done;
-	if (udev->state != USB_STATE_SUSPENDED && !udev->reset_resume)
-		goto done;
 
 	/* Can't resume it if it doesn't have a driver. */
 	if (udev->dev.driver == NULL) {
@@ -842,7 +941,7 @@ static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
 		goto done;
 	driver = to_usb_driver(intf->dev.driver);
 
-	if (driver->suspend && driver->resume) {
+	if (driver->suspend) {
 		status = driver->suspend(intf, msg);
 		if (status == 0)
 			mark_quiesced(intf);
@@ -850,12 +949,10 @@ static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
 			dev_err(&intf->dev, "%s error %d\n",
 					"suspend", status);
 	} else {
-		/*
-		 * FIXME else if there's no suspend method, disconnect...
-		 * Not possible if auto_pm is set...
-		 */
-		dev_warn(&intf->dev, "no suspend for driver %s?\n",
-				driver->name);
+		/* Later we will unbind the driver and reprobe */
+		intf->needs_binding = 1;
+		dev_warn(&intf->dev, "no %s for driver %s?\n",
+				"suspend", driver->name);
 		mark_quiesced(intf);
 	}
 
@@ -879,10 +976,12 @@ static int usb_resume_interface(struct usb_interface *intf, int reset_resume)
 		goto done;
 
 	/* Can't resume it if it doesn't have a driver. */
-	if (intf->condition == USB_INTERFACE_UNBOUND) {
-		status = -ENOTCONN;
+	if (intf->condition == USB_INTERFACE_UNBOUND)
+		goto done;
+
+	/* Don't resume if the interface is marked for rebinding */
+	if (intf->needs_binding)
 		goto done;
-	}
 	driver = to_usb_driver(intf->dev.driver);
 
 	if (reset_resume) {
@@ -892,7 +991,7 @@ static int usb_resume_interface(struct usb_interface *intf, int reset_resume)
 				dev_err(&intf->dev, "%s error %d\n",
 						"reset_resume", status);
 		} else {
-			/* status = -EOPNOTSUPP; */
+			intf->needs_binding = 1;
 			dev_warn(&intf->dev, "no %s for driver %s?\n",
 					"reset_resume", driver->name);
 		}
@@ -903,7 +1002,7 @@ static int usb_resume_interface(struct usb_interface *intf, int reset_resume)
 				dev_err(&intf->dev, "%s error %d\n",
 						"resume", status);
 		} else {
-			/* status = -EOPNOTSUPP; */
+			intf->needs_binding = 1;
 			dev_warn(&intf->dev, "no %s for driver %s?\n",
 					"resume", driver->name);
 		}
@@ -911,11 +1010,10 @@ static int usb_resume_interface(struct usb_interface *intf, int reset_resume)
 
 done:
 	dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status);
-	if (status == 0)
+	if (status == 0 && intf->condition == USB_INTERFACE_BOUND)
 		mark_active(intf);
 
-	/* FIXME: Unbind the driver and reprobe if the resume failed
-	 * (not possible if auto_pm is set) */
+	/* Later we will unbind the driver and/or reprobe, if necessary */
 	return status;
 }
 
@@ -1173,11 +1271,8 @@ static int usb_resume_both(struct usb_device *udev)
 			 * then we're stuck. */
 			status = usb_resume_device(udev);
 		}
-	} else {
-
-		/* Needed for reset-resume */
+	} else if (udev->reset_resume)
 		status = usb_resume_device(udev);
-	}
 
 	if (status == 0 && udev->actconfig) {
 		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
@@ -1474,6 +1569,7 @@ int usb_external_suspend_device(struct usb_device *udev, pm_message_t msg)
 {
 	int	status;
 
+	do_unbind_rebind(udev, DO_UNBIND);
 	usb_pm_lock(udev);
 	udev->auto_pm = 0;
 	status = usb_suspend_both(udev, msg);
@@ -1501,6 +1597,7 @@ int usb_external_resume_device(struct usb_device *udev)
 	status = usb_resume_both(udev);
 	udev->last_busy = jiffies;
 	usb_pm_unlock(udev);
+	do_unbind_rebind(udev, DO_REBIND);
 
 	/* Now that the device is awake, we can start trying to autosuspend
 	 * it again. */
@@ -1542,14 +1639,11 @@ static int usb_resume(struct device *dev)
 	udev = to_usb_device(dev);
 
 	/* If udev->skip_sys_resume is set then udev was already suspended
-	 * when the system suspend started, so we don't want to resume
-	 * udev during this system wakeup.  However a reset-resume counts
-	 * as a wakeup event, so allow a reset-resume to occur if remote
-	 * wakeup is enabled. */
-	if (udev->skip_sys_resume) {
-		if (!(udev->reset_resume && udev->do_remote_wakeup))
-			return -EHOSTUNREACH;
-	}
+	 * when the system sleep started, so we don't want to resume it
+	 * during this system wakeup.
+	 */
+	if (udev->skip_sys_resume)
+		return 0;
 	return usb_external_resume_device(udev);
 }
 
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index fae55a31e26..22912136fc1 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -296,7 +296,7 @@ int usb_create_ep_files(struct device *parent,
 	retval = endpoint_get_minor(ep_dev);
 	if (retval) {
 		dev_err(parent, "can not allocate minor number for %s\n",
-			ep_dev->dev.bus_id);
+			dev_name(&ep_dev->dev));
 		goto error_register;
 	}
 
@@ -307,7 +307,7 @@ int usb_create_ep_files(struct device *parent,
 	ep_dev->dev.class = ep_class->class;
 	ep_dev->dev.parent = parent;
 	ep_dev->dev.release = ep_device_release;
-	snprintf(ep_dev->dev.bus_id, BUS_ID_SIZE, "usbdev%d.%d_ep%02x",
+	dev_set_name(&ep_dev->dev, "usbdev%d.%d_ep%02x",
 		 udev->bus->busnum, udev->devnum,
 		 endpoint->desc.bEndpointAddress);
 
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index c6a95395e52..913fb866789 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -150,7 +150,7 @@ int usb_register_dev(struct usb_interface *intf,
 	int retval = -EINVAL;
 	int minor_base = class_driver->minor_base;
 	int minor = 0;
-	char name[BUS_ID_SIZE];
+	char name[20];
 	char *temp;
 
 #ifdef CONFIG_USB_DYNAMIC_MINORS
@@ -190,9 +190,9 @@ int usb_register_dev(struct usb_interface *intf,
 	intf->minor = minor;
 
 	/* create a usb class device for this usb interface */
-	snprintf(name, BUS_ID_SIZE, class_driver->name, minor - minor_base);
+	snprintf(name, sizeof(name), class_driver->name, minor - minor_base);
 	temp = strrchr(name, '/');
-	if (temp && (temp[1] != 0x00))
+	if (temp && (temp[1] != '\0'))
 		++temp;
 	else
 		temp = name;
@@ -227,7 +227,7 @@ void usb_deregister_dev(struct usb_interface *intf,
 			struct usb_class_driver *class_driver)
 {
 	int minor_base = class_driver->minor_base;
-	char name[BUS_ID_SIZE];
+	char name[20];
 
 #ifdef CONFIG_USB_DYNAMIC_MINORS
 	minor_base = 0;
@@ -242,7 +242,7 @@ void usb_deregister_dev(struct usb_interface *intf,
 	usb_minors[intf->minor] = NULL;
 	up_write(&minor_rwsem);
 
-	snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base);
+	snprintf(name, sizeof(name), class_driver->name, intf->minor - minor_base);
 	device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor));
 	intf->usb_dev = NULL;
 	intf->minor = -1;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 42a436478b7..f7bfd72ef11 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -900,14 +900,14 @@ static int register_root_hub(struct usb_hcd *hcd)
 	if (retval != sizeof usb_dev->descriptor) {
 		mutex_unlock(&usb_bus_list_lock);
 		dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
-				usb_dev->dev.bus_id, retval);
+				dev_name(&usb_dev->dev), retval);
 		return (retval < 0) ? retval : -EMSGSIZE;
 	}
 
 	retval = usb_new_device (usb_dev);
 	if (retval) {
 		dev_err (parent_dev, "can't register root hub for %s, %d\n",
-				usb_dev->dev.bus_id, retval);
+				dev_name(&usb_dev->dev), retval);
 	}
 	mutex_unlock(&usb_bus_list_lock);
 
@@ -1764,7 +1764,7 @@ EXPORT_SYMBOL_GPL (usb_hc_died);
  * If memory is unavailable, returns NULL.
  */
 struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
-		struct device *dev, char *bus_name)
+		struct device *dev, const char *bus_name)
 {
 	struct usb_hcd *hcd;
 
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index b9de1569b39..5b0b59b0d89 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -21,6 +21,8 @@
 
 #include <linux/rwsem.h>
 
+#define MAX_TOPO_LEVEL		6
+
 /* This file contains declarations of usbcore internals that are mostly
  * used or exposed by Host Controller Drivers.
  */
@@ -235,7 +237,7 @@ extern void usb_hcd_disable_endpoint(struct usb_device *udev,
 extern int usb_hcd_get_frame_number(struct usb_device *udev);
 
 extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
-		struct device *dev, char *bus_name);
+		struct device *dev, const char *bus_name);
 extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
 extern void usb_put_hcd(struct usb_hcd *hcd);
 extern int usb_add_hcd(struct usb_hcd *hcd,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 4cfe32a16c3..107e1d25dde 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -72,7 +72,6 @@ struct usb_hub {
 
 	unsigned		limited_power:1;
 	unsigned		quiescing:1;
-	unsigned		activating:1;
 	unsigned		disconnected:1;
 
 	unsigned		has_indicators:1;
@@ -131,6 +130,12 @@ MODULE_PARM_DESC(use_both_schemes,
 DECLARE_RWSEM(ehci_cf_port_reset_rwsem);
 EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
 
+#define HUB_DEBOUNCE_TIMEOUT	1500
+#define HUB_DEBOUNCE_STEP	  25
+#define HUB_DEBOUNCE_STABLE	 100
+
+
+static int usb_reset_and_verify_device(struct usb_device *udev);
 
 static inline char *portspeed(int portstatus)
 {
@@ -535,37 +540,6 @@ static void hub_power_on(struct usb_hub *hub)
 	msleep(max(pgood_delay, (unsigned) 100));
 }
 
-static void hub_quiesce(struct usb_hub *hub)
-{
-	/* (nonblocking) khubd and related activity won't re-trigger */
-	hub->quiescing = 1;
-	hub->activating = 0;
-
-	/* (blocking) stop khubd and related activity */
-	usb_kill_urb(hub->urb);
-	if (hub->has_indicators)
-		cancel_delayed_work_sync(&hub->leds);
-	if (hub->tt.hub)
-		cancel_work_sync(&hub->tt.kevent);
-}
-
-static void hub_activate(struct usb_hub *hub)
-{
-	int	status;
-
-	hub->quiescing = 0;
-	hub->activating = 1;
-
-	status = usb_submit_urb(hub->urb, GFP_NOIO);
-	if (status < 0)
-		dev_err(hub->intfdev, "activate --> %d\n", status);
-	if (hub->has_indicators && blinkenlights)
-		schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
-
-	/* scan all ports ASAP */
-	kick_khubd(hub);
-}
-
 static int hub_hub_status(struct usb_hub *hub,
 		u16 *status, u16 *change)
 {
@@ -624,136 +598,149 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
  	kick_khubd(hub);
 }
 
-/* caller has locked the hub device */
-static void hub_stop(struct usb_hub *hub)
+enum hub_activation_type {
+	HUB_INIT, HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME
+};
+
+static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 {
 	struct usb_device *hdev = hub->hdev;
-	int i;
+	int port1;
+	int status;
+	bool need_debounce_delay = false;
 
-	/* Disconnect all the children */
-	for (i = 0; i < hdev->maxchild; ++i) {
-		if (hdev->children[i])
-			usb_disconnect(&hdev->children[i]);
-	}
-	hub_quiesce(hub);
-}
+	/* After a resume, port power should still be on.
+	 * For any other type of activation, turn it on.
+	 */
+	if (type != HUB_RESUME)
+		hub_power_on(hub);
 
-#define HUB_RESET		1
-#define HUB_RESUME		2
-#define HUB_RESET_RESUME	3
+	/* Check each port and set hub->change_bits to let khubd know
+	 * which ports need attention.
+	 */
+	for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
+		struct usb_device *udev = hdev->children[port1-1];
+		u16 portstatus, portchange;
 
-#ifdef CONFIG_PM
+		portstatus = portchange = 0;
+		status = hub_port_status(hub, port1, &portstatus, &portchange);
+		if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
+			dev_dbg(hub->intfdev,
+					"port %d: status %04x change %04x\n",
+					port1, portstatus, portchange);
 
-/* Try to identify which devices need USB-PERSIST handling */
-static int persistent_device(struct usb_device *udev)
-{
-	int i;
-	int retval;
-	struct usb_host_config *actconfig;
+		/* After anything other than HUB_RESUME (i.e., initialization
+		 * or any sort of reset), every port should be disabled.
+		 * Unconnected ports should likewise be disabled (paranoia),
+		 * and so should ports for which we have no usb_device.
+		 */
+		if ((portstatus & USB_PORT_STAT_ENABLE) && (
+				type != HUB_RESUME ||
+				!(portstatus & USB_PORT_STAT_CONNECTION) ||
+				!udev ||
+				udev->state == USB_STATE_NOTATTACHED)) {
+			clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
+			portstatus &= ~USB_PORT_STAT_ENABLE;
+		}
 
-	/* Explicitly not marked persistent? */
-	if (!udev->persist_enabled)
-		return 0;
+		/* Clear status-change flags; we'll debounce later */
+		if (portchange & USB_PORT_STAT_C_CONNECTION) {
+			need_debounce_delay = true;
+			clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_CONNECTION);
+		}
+		if (portchange & USB_PORT_STAT_C_ENABLE) {
+			need_debounce_delay = true;
+			clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_ENABLE);
+		}
 
-	/* No active config? */
-	actconfig = udev->actconfig;
-	if (!actconfig)
-		return 0;
+		if (!udev || udev->state == USB_STATE_NOTATTACHED) {
+			/* Tell khubd to disconnect the device or
+			 * check for a new connection
+			 */
+			if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
+				set_bit(port1, hub->change_bits);
+
+		} else if (portstatus & USB_PORT_STAT_ENABLE) {
+			/* The power session apparently survived the resume.
+			 * If there was an overcurrent or suspend change
+			 * (i.e., remote wakeup request), have khubd
+			 * take care of it.
+			 */
+			if (portchange)
+				set_bit(port1, hub->change_bits);
 
-	/* FIXME! We should check whether it's open here or not! */
+		} else if (udev->persist_enabled) {
+#ifdef CONFIG_PM
+			udev->reset_resume = 1;
+#endif
+			set_bit(port1, hub->change_bits);
 
-	/*
-	 * Check that all the interface drivers have a
-	 * 'reset_resume' entrypoint
+		} else {
+			/* The power session is gone; tell khubd */
+			usb_set_device_state(udev, USB_STATE_NOTATTACHED);
+			set_bit(port1, hub->change_bits);
+		}
+	}
+
+	/* If no port-status-change flags were set, we don't need any
+	 * debouncing.  If flags were set we can try to debounce the
+	 * ports all at once right now, instead of letting khubd do them
+	 * one at a time later on.
+	 *
+	 * If any port-status changes do occur during this delay, khubd
+	 * will see them later and handle them normally.
 	 */
-	retval = 0;
-	for (i = 0; i < actconfig->desc.bNumInterfaces; i++) {
-		struct usb_interface *intf;
-		struct usb_driver *driver;
+	if (need_debounce_delay)
+		msleep(HUB_DEBOUNCE_STABLE);
 
-		intf = actconfig->interface[i];
-		if (!intf->dev.driver)
-			continue;
-		driver = to_usb_driver(intf->dev.driver);
-		if (!driver->reset_resume)
-			return 0;
-		/*
-		 * We have at least one driver, and that one
-		 * has a reset_resume method.
-		 */
-		retval = 1;
-	}
-	return retval;
-}
+	hub->quiescing = 0;
 
-static void hub_restart(struct usb_hub *hub, int type)
-{
-	struct usb_device *hdev = hub->hdev;
-	int port1;
+	status = usb_submit_urb(hub->urb, GFP_NOIO);
+	if (status < 0)
+		dev_err(hub->intfdev, "activate --> %d\n", status);
+	if (hub->has_indicators && blinkenlights)
+		schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
 
-	/* Check each of the children to see if they require
-	 * USB-PERSIST handling or disconnection.  Also check
-	 * each unoccupied port to make sure it is still disabled.
-	 */
-	for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
-		struct usb_device *udev = hdev->children[port1-1];
-		int status = 0;
-		u16 portstatus, portchange;
+	/* Scan all ports that need attention */
+	kick_khubd(hub);
+}
 
-		if (!udev || udev->state == USB_STATE_NOTATTACHED) {
-			if (type != HUB_RESET) {
-				status = hub_port_status(hub, port1,
-						&portstatus, &portchange);
-				if (status == 0 && (portstatus &
-						USB_PORT_STAT_ENABLE))
-					clear_port_feature(hdev, port1,
-							USB_PORT_FEAT_ENABLE);
-			}
-			continue;
-		}
+enum hub_quiescing_type {
+	HUB_DISCONNECT, HUB_PRE_RESET, HUB_SUSPEND
+};
 
-		/* Was the power session lost while we were suspended? */
-		status = hub_port_status(hub, port1, &portstatus, &portchange);
+static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
+{
+	struct usb_device *hdev = hub->hdev;
+	int i;
 
-		/* If the device is gone, khubd will handle it later */
-		if (status == 0 && !(portstatus & USB_PORT_STAT_CONNECTION))
-			continue;
+	/* khubd and related activity won't re-trigger */
+	hub->quiescing = 1;
 
-		/* For "USB_PERSIST"-enabled children we must
-		 * mark the child device for reset-resume and
-		 * turn off the various status changes to prevent
-		 * khubd from disconnecting it later.
-		 */
-		if (status == 0 && !(portstatus & USB_PORT_STAT_ENABLE) &&
-				persistent_device(udev)) {
-			if (portchange & USB_PORT_STAT_C_ENABLE)
-				clear_port_feature(hub->hdev, port1,
-						USB_PORT_FEAT_C_ENABLE);
-			if (portchange & USB_PORT_STAT_C_CONNECTION)
-				clear_port_feature(hub->hdev, port1,
-						USB_PORT_FEAT_C_CONNECTION);
-			udev->reset_resume = 1;
+	if (type != HUB_SUSPEND) {
+		/* Disconnect all the children */
+		for (i = 0; i < hdev->maxchild; ++i) {
+			if (hdev->children[i])
+				usb_disconnect(&hdev->children[i]);
 		}
-
-		/* Otherwise for a reset_resume we must disconnect the child,
-		 * but as we may not lock the child device here
-		 * we have to do a "logical" disconnect.
-		 */
-		else if (type == HUB_RESET_RESUME)
-			hub_port_logical_disconnect(hub, port1);
 	}
 
-	hub_activate(hub);
+	/* Stop khubd and related activity */
+	usb_kill_urb(hub->urb);
+	if (hub->has_indicators)
+		cancel_delayed_work_sync(&hub->leds);
+	if (hub->tt.hub)
+		cancel_work_sync(&hub->tt.kevent);
 }
 
-#endif	/* CONFIG_PM */
-
 /* caller has locked the hub device */
 static int hub_pre_reset(struct usb_interface *intf)
 {
 	struct usb_hub *hub = usb_get_intfdata(intf);
 
-	hub_stop(hub);
+	hub_quiesce(hub, HUB_PRE_RESET);
 	return 0;
 }
 
@@ -762,8 +749,7 @@ static int hub_post_reset(struct usb_interface *intf)
 {
 	struct usb_hub *hub = usb_get_intfdata(intf);
 
-	hub_power_on(hub);
-	hub_activate(hub);
+	hub_activate(hub, HUB_POST_RESET);
 	return 0;
 }
 
@@ -1009,8 +995,7 @@ static int hub_configure(struct usb_hub *hub,
 	if (hub->has_indicators && blinkenlights)
 		hub->indicator [0] = INDICATOR_CYCLE;
 
-	hub_power_on(hub);
-	hub_activate(hub);
+	hub_activate(hub, HUB_INIT);
 	return 0;
 
 fail:
@@ -1042,7 +1027,7 @@ static void hub_disconnect(struct usb_interface *intf)
 
 	/* Disconnect all children and quiesce the hub */
 	hub->error = 0;
-	hub_stop(hub);
+	hub_quiesce(hub, HUB_DISCONNECT);
 
 	usb_set_intfdata (intf, NULL);
 
@@ -1068,6 +1053,12 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	desc = intf->cur_altsetting;
 	hdev = interface_to_usbdev(intf);
 
+	if (hdev->level == MAX_TOPO_LEVEL) {
+		dev_err(&intf->dev, "Unsupported bus topology: "
+				"hub nested too deep\n");
+		return -E2BIG;
+	}
+
 #ifdef	CONFIG_USB_OTG_BLACKLIST_HUB
 	if (hdev->parent) {
 		dev_warn(&intf->dev, "ignoring external hub\n");
@@ -1814,6 +1805,51 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 
 #ifdef	CONFIG_PM
 
+#define MASK_BITS	(USB_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION | \
+				USB_PORT_STAT_SUSPEND)
+#define WANT_BITS	(USB_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION)
+
+/* Determine whether the device on a port is ready for a normal resume,
+ * is ready for a reset-resume, or should be disconnected.
+ */
+static int check_port_resume_type(struct usb_device *udev,
+		struct usb_hub *hub, int port1,
+		int status, unsigned portchange, unsigned portstatus)
+{
+	/* Is the device still present? */
+	if (status || (portstatus & MASK_BITS) != WANT_BITS) {
+		if (status >= 0)
+			status = -ENODEV;
+	}
+
+	/* Can't do a normal resume if the port isn't enabled,
+	 * so try a reset-resume instead.
+	 */
+	else if (!(portstatus & USB_PORT_STAT_ENABLE) && !udev->reset_resume) {
+		if (udev->persist_enabled)
+			udev->reset_resume = 1;
+		else
+			status = -ENODEV;
+	}
+
+	if (status) {
+		dev_dbg(hub->intfdev,
+				"port %d status %04x.%04x after resume, %d\n",
+				port1, portchange, portstatus, status);
+	} else if (udev->reset_resume) {
+
+		/* Late port handoff can set status-change bits */
+		if (portchange & USB_PORT_STAT_C_CONNECTION)
+			clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_CONNECTION);
+		if (portchange & USB_PORT_STAT_C_ENABLE)
+			clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_ENABLE);
+	}
+
+	return status;
+}
+
 #ifdef	CONFIG_USB_SUSPEND
 
 /*
@@ -1943,7 +1979,8 @@ static int finish_port_resume(struct usb_device *udev)
 	 * resumed.
 	 */
 	if (udev->reset_resume)
-		status = usb_reset_device(udev);
+ retry_reset_resume:
+		status = usb_reset_and_verify_device(udev);
 
  	/* 10.5.4.5 says be sure devices in the tree are still there.
  	 * For now let's assume the device didn't go crazy on resume,
@@ -1954,6 +1991,13 @@ static int finish_port_resume(struct usb_device *udev)
 		status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
 		if (status >= 0)
 			status = (status > 0 ? 0 : -ENODEV);
+
+		/* If a normal resume failed, try doing a reset-resume */
+		if (status && !udev->reset_resume && udev->persist_enabled) {
+			dev_dbg(&udev->dev, "retry with reset-resume\n");
+			udev->reset_resume = 1;
+			goto retry_reset_resume;
+		}
 	}
 
 	if (status) {
@@ -2002,7 +2046,7 @@ static int finish_port_resume(struct usb_device *udev)
  * to it will be lost.  Using the USB_PERSIST facility, the device can be
  * made to appear as if it had not disconnected.
  *
- * This facility can be dangerous.  Although usb_reset_device() makes
+ * This facility can be dangerous.  Although usb_reset_and_verify_device() makes
  * every effort to insure that the same device is present after the
  * reset as before, it cannot provide a 100% guarantee.  Furthermore it's
  * quite possible for a device to remain unaltered but its media to be
@@ -2018,7 +2062,6 @@ int usb_port_resume(struct usb_device *udev)
 	int		port1 = udev->portnum;
 	int		status;
 	u16		portchange, portstatus;
-	unsigned	mask_flags, want_flags;
 
 	/* Skip the initial Clear-Suspend step for a remote wakeup */
 	status = hub_port_status(hub, port1, &portstatus, &portchange);
@@ -2047,35 +2090,23 @@ int usb_port_resume(struct usb_device *udev)
 		 */
 		status = hub_port_status(hub, port1, &portstatus, &portchange);
 
- SuspendCleared:
-		if (udev->reset_resume)
-			want_flags = USB_PORT_STAT_POWER
-					| USB_PORT_STAT_CONNECTION;
-		else
-			want_flags = USB_PORT_STAT_POWER
-					| USB_PORT_STAT_CONNECTION
-					| USB_PORT_STAT_ENABLE;
-		mask_flags = want_flags | USB_PORT_STAT_SUSPEND;
+		/* TRSMRCY = 10 msec */
+		msleep(10);
+	}
 
-		if (status < 0 || (portstatus & mask_flags) != want_flags) {
-			dev_dbg(hub->intfdev,
-				"port %d status %04x.%04x after resume, %d\n",
-				port1, portchange, portstatus, status);
-			if (status >= 0)
-				status = -ENODEV;
-		} else {
-			if (portchange & USB_PORT_STAT_C_SUSPEND)
-				clear_port_feature(hub->hdev, port1,
-						USB_PORT_FEAT_C_SUSPEND);
-			/* TRSMRCY = 10 msec */
-			msleep(10);
-		}
+ SuspendCleared:
+	if (status == 0) {
+		if (portchange & USB_PORT_STAT_C_SUSPEND)
+			clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_SUSPEND);
 	}
 
 	clear_bit(port1, hub->busy_bits);
 	if (!hub->hdev->parent && !hub->busy_bits[0])
 		usb_enable_root_hub_irq(hub->hdev->bus);
 
+	status = check_port_resume_type(udev,
+			hub, port1, status, portchange, portstatus);
 	if (status == 0)
 		status = finish_port_resume(udev);
 	if (status < 0) {
@@ -2085,17 +2116,16 @@ int usb_port_resume(struct usb_device *udev)
 	return status;
 }
 
+/* caller has locked udev */
 static int remote_wakeup(struct usb_device *udev)
 {
 	int	status = 0;
 
-	usb_lock_device(udev);
 	if (udev->state == USB_STATE_SUSPENDED) {
 		dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
 		usb_mark_last_busy(udev);
 		status = usb_external_resume_device(udev);
 	}
-	usb_unlock_device(udev);
 	return status;
 }
 
@@ -2108,14 +2138,25 @@ int usb_port_suspend(struct usb_device *udev)
 	return 0;
 }
 
+/* However we may need to do a reset-resume */
+
 int usb_port_resume(struct usb_device *udev)
 {
-	int status = 0;
+	struct usb_hub	*hub = hdev_to_hub(udev->parent);
+	int		port1 = udev->portnum;
+	int		status;
+	u16		portchange, portstatus;
 
-	/* However we may need to do a reset-resume */
-	if (udev->reset_resume) {
+	status = hub_port_status(hub, port1, &portstatus, &portchange);
+	status = check_port_resume_type(udev,
+			hub, port1, status, portchange, portstatus);
+
+	if (status) {
+		dev_dbg(&udev->dev, "can't resume, status %d\n", status);
+		hub_port_logical_disconnect(hub, port1);
+	} else if (udev->reset_resume) {
 		dev_dbg(&udev->dev, "reset-resume\n");
-		status = usb_reset_device(udev);
+		status = usb_reset_and_verify_device(udev);
 	}
 	return status;
 }
@@ -2149,7 +2190,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 	dev_dbg(&intf->dev, "%s\n", __func__);
 
 	/* stop khubd and related activity */
-	hub_quiesce(hub);
+	hub_quiesce(hub, HUB_SUSPEND);
 	return 0;
 }
 
@@ -2158,7 +2199,7 @@ static int hub_resume(struct usb_interface *intf)
 	struct usb_hub *hub = usb_get_intfdata(intf);
 
 	dev_dbg(&intf->dev, "%s\n", __func__);
-	hub_restart(hub, HUB_RESUME);
+	hub_activate(hub, HUB_RESUME);
 	return 0;
 }
 
@@ -2167,8 +2208,7 @@ static int hub_reset_resume(struct usb_interface *intf)
 	struct usb_hub *hub = usb_get_intfdata(intf);
 
 	dev_dbg(&intf->dev, "%s\n", __func__);
-	hub_power_on(hub);
-	hub_restart(hub, HUB_RESET_RESUME);
+	hub_activate(hub, HUB_RESET_RESUME);
 	return 0;
 }
 
@@ -2218,11 +2258,6 @@ static inline int remote_wakeup(struct usb_device *udev)
  * every 25ms for transient disconnects.  When the port status has been
  * unchanged for 100ms it returns the port status.
  */
-
-#define HUB_DEBOUNCE_TIMEOUT	1500
-#define HUB_DEBOUNCE_STEP	  25
-#define HUB_DEBOUNCE_STABLE	 100
-
 static int hub_port_debounce(struct usb_hub *hub, int port1)
 {
 	int ret;
@@ -2302,7 +2337,7 @@ static int hub_set_address(struct usb_device *udev, int devnum)
  * Returns device in USB_STATE_ADDRESS, except on error.
  *
  * If this is called for an already-existing device (as part of
- * usb_reset_device), the caller must own the device lock.  For a
+ * usb_reset_and_verify_device), the caller must own the device lock.  For a
  * newly detected device that is not accessible through any global
  * pointers, it's not necessary to lock the device.
  */
@@ -2619,7 +2654,7 @@ hub_power_remaining (struct usb_hub *hub)
  * This routine is called when:
  * 	a port connection-change occurs;
  *	a port enable-change occurs (often caused by EMI);
- *	usb_reset_device() encounters changed descriptors (as from
+ *	usb_reset_and_verify_device() encounters changed descriptors (as from
  *		a firmware download)
  * caller already locked the hub
  */
@@ -2629,9 +2664,11 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 	struct usb_device *hdev = hub->hdev;
 	struct device *hub_dev = hub->intfdev;
 	struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
-	u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
+	unsigned wHubCharacteristics =
+			le16_to_cpu(hub->descriptor->wHubCharacteristics);
+	struct usb_device *udev;
 	int status, i;
- 
+
 	dev_dbg (hub_dev,
 		"port %d, status %04x, change %04x, %s\n",
 		port1, portstatus, portchange, portspeed (portstatus));
@@ -2640,30 +2677,73 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		set_port_led(hub, port1, HUB_LED_AUTO);
 		hub->indicator[port1-1] = INDICATOR_AUTO;
 	}
- 
-	/* Disconnect any existing devices under this port */
-	if (hdev->children[port1-1])
-		usb_disconnect(&hdev->children[port1-1]);
-	clear_bit(port1, hub->change_bits);
 
 #ifdef	CONFIG_USB_OTG
 	/* during HNP, don't repeat the debounce */
 	if (hdev->bus->is_b_host)
-		portchange &= ~USB_PORT_STAT_C_CONNECTION;
+		portchange &= ~(USB_PORT_STAT_C_CONNECTION |
+				USB_PORT_STAT_C_ENABLE);
 #endif
 
-	if (portchange & USB_PORT_STAT_C_CONNECTION) {
+	/* Try to use the debounce delay for protection against
+	 * port-enable changes caused, for example, by EMI.
+	 */
+	if (portchange & (USB_PORT_STAT_C_CONNECTION |
+				USB_PORT_STAT_C_ENABLE)) {
 		status = hub_port_debounce(hub, port1);
 		if (status < 0) {
 			if (printk_ratelimit())
 				dev_err (hub_dev, "connect-debounce failed, "
 						"port %d disabled\n", port1);
-			goto done;
+			portstatus &= ~USB_PORT_STAT_CONNECTION;
+		} else {
+			portstatus = status;
+		}
+	}
+
+	/* Try to resuscitate an existing device */
+	udev = hdev->children[port1-1];
+	if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
+			udev->state != USB_STATE_NOTATTACHED) {
+
+		usb_lock_device(udev);
+		if (portstatus & USB_PORT_STAT_ENABLE) {
+			status = 0;		/* Nothing to do */
+		} else if (!udev->persist_enabled) {
+			status = -ENODEV;	/* Mustn't resuscitate */
+
+#ifdef CONFIG_USB_SUSPEND
+		} else if (udev->state == USB_STATE_SUSPENDED) {
+			/* For a suspended device, treat this as a
+			 * remote wakeup event.
+			 */
+			if (udev->do_remote_wakeup)
+				status = remote_wakeup(udev);
+
+			/* Otherwise leave it be; devices can't tell the
+			 * difference between suspended and disabled.
+			 */
+			else
+				status = 0;
+#endif
+
+		} else {
+			status = usb_reset_device(udev);
+		}
+		usb_unlock_device(udev);
+
+		if (status == 0) {
+			clear_bit(port1, hub->change_bits);
+			return;
 		}
-		portstatus = status;
 	}
 
-	/* Return now if nothing is connected */
+	/* Disconnect any existing devices under this port */
+	if (udev)
+		usb_disconnect(&hdev->children[port1-1]);
+	clear_bit(port1, hub->change_bits);
+
+	/* Return now if debouncing failed or nothing is connected */
 	if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
 
 		/* maybe switch power back on (e.g. root hub was reset) */
@@ -2677,7 +2757,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 	}
 
 	for (i = 0; i < SET_CONFIG_TRIES; i++) {
-		struct usb_device *udev;
 
 		/* reallocate for each attempt, since references
 		 * to the previous one can escape in various ways
@@ -2858,7 +2937,7 @@ static void hub_events(void)
 		/* If the hub has died, clean up after it */
 		if (hdev->state == USB_STATE_NOTATTACHED) {
 			hub->error = -ENODEV;
-			hub_stop(hub);
+			hub_quiesce(hub, HUB_DISCONNECT);
 			goto loop;
 		}
 
@@ -2877,7 +2956,7 @@ static void hub_events(void)
 			dev_dbg (hub_dev, "resetting for error %d\n",
 				hub->error);
 
-			ret = usb_reset_composite_device(hdev, intf);
+			ret = usb_reset_device(hdev);
 			if (ret) {
 				dev_dbg (hub_dev,
 					"error resetting hub: %d\n", ret);
@@ -2894,7 +2973,7 @@ static void hub_events(void)
 				continue;
 			connect_change = test_bit(i, hub->change_bits);
 			if (!test_and_clear_bit(i, hub->event_bits) &&
-					!connect_change && !hub->activating)
+					!connect_change)
 				continue;
 
 			ret = hub_port_status(hub, i,
@@ -2902,11 +2981,6 @@ static void hub_events(void)
 			if (ret < 0)
 				continue;
 
-			if (hub->activating && !hdev->children[i-1] &&
-					(portstatus &
-						USB_PORT_STAT_CONNECTION))
-				connect_change = 1;
-
 			if (portchange & USB_PORT_STAT_C_CONNECTION) {
 				clear_port_feature(hdev, i,
 					USB_PORT_FEAT_C_CONNECTION);
@@ -2941,11 +3015,16 @@ static void hub_events(void)
 			}
 
 			if (portchange & USB_PORT_STAT_C_SUSPEND) {
+				struct usb_device *udev;
+
 				clear_port_feature(hdev, i,
 					USB_PORT_FEAT_C_SUSPEND);
-				if (hdev->children[i-1]) {
+				udev = hdev->children[i-1];
+				if (udev) {
+					usb_lock_device(udev);
 					ret = remote_wakeup(hdev->
 							children[i-1]);
+					usb_unlock_device(udev);
 					if (ret < 0)
 						connect_change = 1;
 				} else {
@@ -3002,8 +3081,6 @@ static void hub_events(void)
 			}
 		}
 
-		hub->activating = 0;
-
 		/* If this is a root hub, tell the HCD it's okay to
 		 * re-enable port-change interrupts now. */
 		if (!hdev->parent && !hub->busy_bits[0])
@@ -3172,12 +3249,12 @@ static int descriptors_changed(struct usb_device *udev,
 }
 
 /**
- * usb_reset_device - perform a USB port reset to reinitialize a device
+ * usb_reset_and_verify_device - perform a USB port reset to reinitialize a device
  * @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
  *
  * WARNING - don't use this routine to reset a composite device
  * (one with multiple interfaces owned by separate drivers)!
- * Use usb_reset_composite_device() instead.
+ * Use usb_reset_device() instead.
  *
  * Do a port reset, reassign the device's address, and establish its
  * former operating configuration.  If the reset fails, or the device's
@@ -3201,7 +3278,7 @@ static int descriptors_changed(struct usb_device *udev,
  * holding the device lock because these tasks should always call
  * usb_autopm_resume_device(), thereby preventing any unwanted autoresume.
  */
-int usb_reset_device(struct usb_device *udev)
+static int usb_reset_and_verify_device(struct usb_device *udev)
 {
 	struct usb_device		*parent_hdev = udev->parent;
 	struct usb_hub			*parent_hub;
@@ -3289,26 +3366,28 @@ re_enumerate:
 	hub_port_logical_disconnect(parent_hub, port1);
 	return -ENODEV;
 }
-EXPORT_SYMBOL_GPL(usb_reset_device);
 
 /**
- * usb_reset_composite_device - warn interface drivers and perform a USB port reset
+ * usb_reset_device - warn interface drivers and perform a USB port reset
  * @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
- * @iface: interface bound to the driver making the request (optional)
  *
  * Warns all drivers bound to registered interfaces (using their pre_reset
  * method), performs the port reset, and then lets the drivers know that
  * the reset is over (using their post_reset method).
  *
- * Return value is the same as for usb_reset_device().
+ * Return value is the same as for usb_reset_and_verify_device().
  *
  * The caller must own the device lock.  For example, it's safe to use
  * this from a driver probe() routine after downloading new firmware.
  * For calls that might not occur during probe(), drivers should lock
  * the device using usb_lock_device_for_reset().
+ *
+ * If an interface is currently being probed or disconnected, we assume
+ * its driver knows how to handle resets.  For all other interfaces,
+ * if the driver doesn't have pre_reset and post_reset methods then
+ * we attempt to unbind it and rebind afterward.
  */
-int usb_reset_composite_device(struct usb_device *udev,
-		struct usb_interface *iface)
+int usb_reset_device(struct usb_device *udev)
 {
 	int ret;
 	int i;
@@ -3324,40 +3403,47 @@ int usb_reset_composite_device(struct usb_device *udev,
 	/* Prevent autosuspend during the reset */
 	usb_autoresume_device(udev);
 
-	if (iface && iface->condition != USB_INTERFACE_BINDING)
-		iface = NULL;
-
 	if (config) {
 		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
 			struct usb_interface *cintf = config->interface[i];
 			struct usb_driver *drv;
+			int unbind = 0;
 
 			if (cintf->dev.driver) {
 				drv = to_usb_driver(cintf->dev.driver);
-				if (drv->pre_reset)
-					(drv->pre_reset)(cintf);
-	/* FIXME: Unbind if pre_reset returns an error or isn't defined */
+				if (drv->pre_reset && drv->post_reset)
+					unbind = (drv->pre_reset)(cintf);
+				else if (cintf->condition ==
+						USB_INTERFACE_BOUND)
+					unbind = 1;
+				if (unbind)
+					usb_forced_unbind_intf(cintf);
 			}
 		}
 	}
 
-	ret = usb_reset_device(udev);
+	ret = usb_reset_and_verify_device(udev);
 
 	if (config) {
 		for (i = config->desc.bNumInterfaces - 1; i >= 0; --i) {
 			struct usb_interface *cintf = config->interface[i];
 			struct usb_driver *drv;
+			int rebind = cintf->needs_binding;
 
-			if (cintf->dev.driver) {
+			if (!rebind && cintf->dev.driver) {
 				drv = to_usb_driver(cintf->dev.driver);
 				if (drv->post_reset)
-					(drv->post_reset)(cintf);
-	/* FIXME: Unbind if post_reset returns an error or isn't defined */
+					rebind = (drv->post_reset)(cintf);
+				else if (cintf->condition ==
+						USB_INTERFACE_BOUND)
+					rebind = 1;
 			}
+			if (rebind)
+				usb_rebind_intf(cintf);
 		}
 	}
 
 	usb_autosuspend_device(udev);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(usb_reset_composite_device);
+EXPORT_SYMBOL_GPL(usb_reset_device);
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 1d253dd4ea8..db410e92c80 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -712,25 +712,11 @@ static void usbfs_add_device(struct usb_device *dev)
 
 static void usbfs_remove_device(struct usb_device *dev)
 {
-	struct dev_state *ds;
-	struct siginfo sinfo;
-
 	if (dev->usbfs_dentry) {
 		fs_remove_file (dev->usbfs_dentry);
 		dev->usbfs_dentry = NULL;
 	}
-	while (!list_empty(&dev->filelist)) {
-		ds = list_entry(dev->filelist.next, struct dev_state, list);
-		wake_up_all(&ds->wait);
-		list_del_init(&ds->list);
-		if (ds->discsignr) {
-			sinfo.si_signo = ds->discsignr;
-			sinfo.si_errno = EPIPE;
-			sinfo.si_code = SI_ASYNCIO;
-			sinfo.si_addr = ds->disccontext;
-			kill_pid_info_as_uid(ds->discsignr, &sinfo, ds->disc_pid, ds->disc_uid, ds->disc_euid, ds->secid);
-		}
-	}
+	usb_fs_classdev_common_remove(dev);
 }
 
 static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index fe47d145255..2fcc06eb5e6 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -400,7 +400,7 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 	if (usb_pipein(pipe))
 		urb_flags |= URB_SHORT_NOT_OK;
 
-	for (i = 0; i < io->entries; i++) {
+	for_each_sg(sg, sg, io->entries, i) {
 		unsigned len;
 
 		io->urbs[i] = usb_alloc_urb(0, mem_flags);
@@ -434,17 +434,17 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 		 * to prevent stale pointers and to help spot bugs.
 		 */
 		if (dma) {
-			io->urbs[i]->transfer_dma = sg_dma_address(sg + i);
-			len = sg_dma_len(sg + i);
+			io->urbs[i]->transfer_dma = sg_dma_address(sg);
+			len = sg_dma_len(sg);
 #if defined(CONFIG_HIGHMEM) || defined(CONFIG_GART_IOMMU)
 			io->urbs[i]->transfer_buffer = NULL;
 #else
-			io->urbs[i]->transfer_buffer = sg_virt(&sg[i]);
+			io->urbs[i]->transfer_buffer = sg_virt(sg);
 #endif
 		} else {
 			/* hc may use _only_ transfer_buffer */
-			io->urbs[i]->transfer_buffer = sg_virt(&sg[i]);
-			len = sg[i].length;
+			io->urbs[i]->transfer_buffer = sg_virt(sg);
+			len = sg->length;
 		}
 
 		if (length) {
@@ -1090,7 +1090,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 			if (!device_is_registered(&interface->dev))
 				continue;
 			dev_dbg(&dev->dev, "unregistering interface %s\n",
-				interface->dev.bus_id);
+				dev_name(&interface->dev));
 			device_del(&interface->dev);
 			usb_remove_sysfs_intf_files(interface);
 		}
@@ -1476,7 +1476,7 @@ static struct usb_interface_assoc_descriptor *find_iad(struct usb_device *dev,
  *
  * This call is synchronous. The calling context must be able to sleep,
  * must own the device lock, and must not hold the driver model's USB
- * bus mutex; usb device driver probe() methods cannot use this routine.
+ * bus mutex; usb interface driver probe() methods cannot use this routine.
  *
  * Returns zero on success, or else the status code returned by the
  * underlying call that failed.  On successful completion, each interface
@@ -1611,7 +1611,7 @@ free_interfaces:
 		intf->dev.dma_mask = dev->dev.dma_mask;
 		device_initialize(&intf->dev);
 		mark_quiesced(intf);
-		sprintf(&intf->dev.bus_id[0], "%d-%s:%d.%d",
+		dev_set_name(&intf->dev, "%d-%s:%d.%d",
 			dev->bus->busnum, dev->devpath,
 			configuration, alt->desc.bInterfaceNumber);
 	}
@@ -1631,12 +1631,12 @@ free_interfaces:
 
 		dev_dbg(&dev->dev,
 			"adding %s (config #%d, interface %d)\n",
-			intf->dev.bus_id, configuration,
+			dev_name(&intf->dev), configuration,
 			intf->cur_altsetting->desc.bInterfaceNumber);
 		ret = device_add(&intf->dev);
 		if (ret != 0) {
 			dev_err(&dev->dev, "device_add(%s) --> %d\n",
-				intf->dev.bus_id, ret);
+				dev_name(&intf->dev), ret);
 			continue;
 		}
 		usb_create_sysfs_intf_files(intf);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 32577437583..84fcaa6a21e 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -308,7 +308,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 	 * by location for diagnostics, tools, driver model, etc.  The
 	 * string is a path along hub ports, from the root.  Each device's
 	 * dev->devpath will be stable until USB is re-cabled, and hubs
-	 * are often labeled with these port numbers.  The bus_id isn't
+	 * are often labeled with these port numbers.  The name isn't
 	 * as stable:  bus->busnum changes easily from modprobe order,
 	 * cardbus or pci hotplugging, and so on.
 	 */
@@ -316,7 +316,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 		dev->devpath[0] = '0';
 
 		dev->dev.parent = bus->controller;
-		sprintf(&dev->dev.bus_id[0], "usb%d", bus->busnum);
+		dev_set_name(&dev->dev, "usb%d", bus->busnum);
 		root_hub = 1;
 	} else {
 		/* match any labeling on the hubs; it's one-based */
@@ -328,8 +328,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 				"%s.%d", parent->devpath, port1);
 
 		dev->dev.parent = &parent->dev;
-		sprintf(&dev->dev.bus_id[0], "%d-%s",
-			bus->busnum, dev->devpath);
+		dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath);
 
 		/* hub driver sets up TT records */
 	}
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 1a8bc21c335..d9a6e16dbf8 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -29,6 +29,8 @@ extern int usb_choose_configuration(struct usb_device *udev);
 extern void usb_kick_khubd(struct usb_device *dev);
 extern int usb_match_device(struct usb_device *dev,
 			    const struct usb_device_id *id);
+extern void usb_forced_unbind_intf(struct usb_interface *intf);
+extern void usb_rebind_intf(struct usb_interface *intf);
 
 extern int  usb_hub_init(void);
 extern void usb_hub_cleanup(void);
@@ -140,26 +142,11 @@ extern struct usb_driver usbfs_driver;
 extern const struct file_operations usbfs_devices_fops;
 extern const struct file_operations usbdev_file_operations;
 extern void usbfs_conn_disc_event(void);
+extern void usb_fs_classdev_common_remove(struct usb_device *udev);
 
 extern int usb_devio_init(void);
 extern void usb_devio_cleanup(void);
 
-struct dev_state {
-	struct list_head list;      /* state list */
-	struct usb_device *dev;
-	struct file *file;
-	spinlock_t lock;            /* protects the async urb lists */
-	struct list_head async_pending;
-	struct list_head async_completed;
-	wait_queue_head_t wait;     /* wake up if a request completed */
-	unsigned int discsignr;
-	struct pid *disc_pid;
-	uid_t disc_uid, disc_euid;
-	void __user *disccontext;
-	unsigned long ifclaimed;
-	u32 secid;
-};
-
 /* internal notify stuff */
 extern void usb_notify_add_device(struct usb_device *udev);
 extern void usb_notify_remove_device(struct usb_device *udev);