USB: xhci: Bulk transfer support

Allow device drivers to submit URBs to bulk endpoints on devices under an
xHCI host controller.  Share code between the control and bulk enqueueing
functions when it makes sense.

To get the best performance out of bulk transfers, SuperSpeed devices must
have the bMaxBurst size copied from their endpoint companion controller
into the xHCI device context.  This allows the host controller to "burst"
up to 16 packets before it has to wait for the device to acknowledge the
first packet.

The buffers in Transfer Request Blocks (TRBs) can cross page boundaries,
but they cannot cross 64KB boundaries.  The buffer must be broken into
multiple TRBs if a 64KB boundary is crossed.

The sum of buffer lengths in all the TRBs in a Transfer Descriptor (TD)
cannot exceed 64MB.  To work around this, the enqueueing code must enqueue
multiple TDs.  The transfer event handler may incorrectly give back the
URB in this case, if it gets a transfer event that points somewhere in the
first TD.  FIXME later.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 241 insertions, 29 deletions

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index b4ccf0d72c1..3364381ee6c 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -395,7 +395,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	dma_addr_t event_dma;
 	struct xhci_segment *event_seg;
 	union xhci_trb *event_trb;
-	struct urb *urb = NULL;
+	struct urb *urb;
 	int status = -EINPROGRESS;
 
 	xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
@@ -437,7 +437,46 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		return -ESHUTDOWN;
 	}
 	event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
-
+	xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+			(unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
+	xhci_dbg(xhci, "Offset 0x00 (buffer[0]) = 0x%x\n",
+			(unsigned int) event->buffer[0]);
+	xhci_dbg(xhci, "Offset 0x04 (buffer[0]) = 0x%x\n",
+			(unsigned int) event->buffer[1]);
+	xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n",
+			(unsigned int) event->transfer_len);
+	xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n",
+			(unsigned int) event->flags);
+
+	/* Look for common error cases */
+	switch (GET_COMP_CODE(event->transfer_len)) {
+	/* Skip codes that require special handling depending on
+	 * transfer type
+	 */
+	case COMP_SUCCESS:
+	case COMP_SHORT_TX:
+		break;
+	case COMP_STALL:
+		xhci_warn(xhci, "WARN: Stalled endpoint\n");
+		status = -EPIPE;
+		break;
+	case COMP_TRB_ERR:
+		xhci_warn(xhci, "WARN: TRB error on endpoint\n");
+		status = -EILSEQ;
+		break;
+	case COMP_TX_ERR:
+		xhci_warn(xhci, "WARN: transfer error on endpoint\n");
+		status = -EPROTO;
+		break;
+	case COMP_DB_ERR:
+		xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
+		status = -ENOSR;
+		break;
+	default:
+		xhci_warn(xhci, "ERROR Unknown event condition, HC probably busted\n");
+		urb = NULL;
+		goto cleanup;
+	}
 	/* Now update the urb's actual_length and give back to the core */
 	/* Was this a control transfer? */
 	if (usb_endpoint_xfer_control(&td->urb->ep->desc)) {
@@ -459,25 +498,9 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			xhci_warn(xhci, "WARN: short transfer on control ep\n");
 			status = -EREMOTEIO;
 			break;
-		case COMP_STALL:
-			xhci_warn(xhci, "WARN: Stalled control ep\n");
-			status = -EPIPE;
-			break;
-		case COMP_TRB_ERR:
-			xhci_warn(xhci, "WARN: TRB error on control ep\n");
-			status = -EILSEQ;
-			break;
-		case COMP_TX_ERR:
-			xhci_warn(xhci, "WARN: transfer error on control ep\n");
-			status = -EPROTO;
-			break;
-		case COMP_DB_ERR:
-			xhci_warn(xhci, "WARN: HC couldn't access mem fast enough on control TX\n");
-			status = -ENOSR;
-			break;
 		default:
-			xhci_dbg(xhci, "ERROR Unknown event condition, HC probably busted\n");
-			goto cleanup;
+			/* Others already handled above */
+			break;
 		}
 		/*
 		 * Did we transfer any data, despite the errors that might have
@@ -493,21 +516,90 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 					TRB_LEN(event->transfer_len);
 			}
 		}
-		while (ep_ring->dequeue != td->last_trb)
-			inc_deq(xhci, ep_ring, false);
-		inc_deq(xhci, ep_ring, false);
-
-		/* Clean up the endpoint's TD list */
-		urb = td->urb;
-		list_del(&td->td_list);
-		kfree(td);
 	} else {
-		xhci_dbg(xhci, "FIXME do something for non-control transfers\n");
+		switch (GET_COMP_CODE(event->transfer_len)) {
+		case COMP_SUCCESS:
+			/* Double check that the HW transferred everything. */
+			if (event_trb != td->last_trb) {
+				xhci_warn(xhci, "WARN Successful completion "
+						"on short TX\n");
+				if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+					status = -EREMOTEIO;
+				else
+					status = 0;
+			} else {
+				xhci_dbg(xhci, "Successful bulk transfer!\n");
+				status = 0;
+			}
+			break;
+		case COMP_SHORT_TX:
+			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+				status = -EREMOTEIO;
+			else
+				status = 0;
+			break;
+		default:
+			/* Others already handled above */
+			break;
+		}
+		dev_dbg(&td->urb->dev->dev,
+				"ep %#x - asked for %d bytes, "
+				"%d bytes untransferred\n",
+				td->urb->ep->desc.bEndpointAddress,
+				td->urb->transfer_buffer_length,
+				TRB_LEN(event->transfer_len));
+		/* Fast path - was this the last TRB in the TD for this URB? */
+		if (event_trb == td->last_trb) {
+			if (TRB_LEN(event->transfer_len) != 0) {
+				td->urb->actual_length =
+					td->urb->transfer_buffer_length -
+					TRB_LEN(event->transfer_len);
+				if (td->urb->actual_length < 0) {
+					xhci_warn(xhci, "HC gave bad length "
+							"of %d bytes left\n",
+							TRB_LEN(event->transfer_len));
+					td->urb->actual_length = 0;
+				}
+				if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+					status = -EREMOTEIO;
+				else
+					status = 0;
+			} else {
+				td->urb->actual_length = td->urb->transfer_buffer_length;
+				/* Ignore a short packet completion if the
+				 * untransferred length was zero.
+				 */
+				status = 0;
+			}
+		} else {
+			/* Slow path - walk the list, starting from the first
+			 * TRB to get the actual length transferred
+			 */
+			td->urb->actual_length = 0;
+			while (ep_ring->dequeue != event_trb) {
+				td->urb->actual_length += TRB_LEN(ep_ring->dequeue->generic.field[2]);
+				inc_deq(xhci, ep_ring, false);
+			}
+			td->urb->actual_length += TRB_LEN(ep_ring->dequeue->generic.field[2]) -
+				TRB_LEN(event->transfer_len);
+
+		}
 	}
+	/* Update ring dequeue pointer */
+	while (ep_ring->dequeue != td->last_trb)
+		inc_deq(xhci, ep_ring, false);
+	inc_deq(xhci, ep_ring, false);
+
+	/* Clean up the endpoint's TD list */
+	urb = td->urb;
+	list_del(&td->td_list);
+	kfree(td);
+	urb->hcpriv = NULL;
 cleanup:
 	inc_deq(xhci, xhci->event_ring, true);
 	set_hc_event_deq(xhci);
 
+	/* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
 	if (urb) {
 		usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
 		spin_unlock(&xhci->lock);
@@ -666,6 +758,126 @@ int xhci_prepare_transfer(struct xhci_hcd *xhci,
 	return 0;
 }
 
+/* This is very similar to what ehci-q.c qtd_fill() does */
+int queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index)
+{
+	struct xhci_ring *ep_ring;
+	struct xhci_td *td;
+	int num_trbs;
+	struct xhci_generic_trb *start_trb;
+	bool first_trb;
+	int start_cycle;
+	u32 field;
+
+	int running_total, trb_buff_len, ret;
+	u64 addr;
+
+	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+
+	num_trbs = 0;
+	/* How much data is (potentially) left before the 64KB boundary? */
+	running_total = TRB_MAX_BUFF_SIZE -
+		(urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+
+	/* If there's some data on this 64KB chunk, or we have to send a
+	 * zero-length transfer, we need at least one TRB
+	 */
+	if (running_total != 0 || urb->transfer_buffer_length == 0)
+		num_trbs++;
+	/* How many more 64KB chunks to transfer, how many more TRBs? */
+	while (running_total < urb->transfer_buffer_length) {
+		num_trbs++;
+		running_total += TRB_MAX_BUFF_SIZE;
+	}
+	/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
+
+	if (!in_interrupt())
+		dev_dbg(&urb->dev->dev, "ep %#x - urb len = %d, addr = %#x, num_trbs = %d\n",
+				urb->ep->desc.bEndpointAddress,
+				urb->transfer_buffer_length, urb->transfer_dma,
+				num_trbs);
+	ret = xhci_prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
+			num_trbs, urb, &td, mem_flags);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
+	 * until we've finished creating all the other TRBs.  The ring's cycle
+	 * state may change as we enqueue the other TRBs, so save it too.
+	 */
+	start_trb = &ep_ring->enqueue->generic;
+	start_cycle = ep_ring->cycle_state;
+
+	running_total = 0;
+	/* How much data is in the first TRB? */
+	addr = (u64) urb->transfer_dma;
+	trb_buff_len = TRB_MAX_BUFF_SIZE -
+		(urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+	if (urb->transfer_buffer_length < trb_buff_len)
+		trb_buff_len = urb->transfer_buffer_length;
+
+	first_trb = true;
+
+	/* Queue the first TRB, even if it's zero-length */
+	do {
+		field = 0;
+
+		/* Don't change the cycle bit of the first TRB until later */
+		if (first_trb)
+			first_trb = false;
+		else
+			field |= ep_ring->cycle_state;
+
+		/* Chain all the TRBs together; clear the chain bit in the last
+		 * TRB to indicate it's the last TRB in the chain.
+		 */
+		if (num_trbs > 1) {
+			field |= TRB_CHAIN;
+		} else {
+			/* FIXME - add check for ZERO_PACKET flag before this */
+			td->last_trb = ep_ring->enqueue;
+			field |= TRB_IOC;
+		}
+		queue_trb(xhci, ep_ring, false,
+				(u32) addr,
+				(u32) ((u64) addr >> 32),
+				TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+				/* We always want to know if the TRB was short,
+				 * or we won't get an event when it completes.
+				 * (Unless we use event data TRBs, which are a
+				 * waste of space and HC resources.)
+				 */
+				field | TRB_ISP | TRB_TYPE(TRB_NORMAL));
+		--num_trbs;
+		running_total += trb_buff_len;
+
+		/* Calculate length for next transfer */
+		addr += trb_buff_len;
+		trb_buff_len = urb->transfer_buffer_length - running_total;
+		if (trb_buff_len > TRB_MAX_BUFF_SIZE)
+			trb_buff_len = TRB_MAX_BUFF_SIZE;
+	} while (running_total < urb->transfer_buffer_length);
+
+	if (num_trbs != 0)
+		dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
+				"TRBs, %d left\n", __FUNCTION__,
+				urb->ep->desc.bEndpointAddress, num_trbs);
+	/*
+	 * Pass all the TRBs to the hardware at once and make sure this write
+	 * isn't reordered.
+	 */
+	wmb();
+	start_trb->field[3] |= start_cycle;
+	field = xhci_readl(xhci, &xhci->dba->doorbell[slot_id]) & DB_MASK;
+	xhci_writel(xhci, field | EPI_TO_DB(ep_index), &xhci->dba->doorbell[slot_id]);
+	/* Flush PCI posted writes */
+	xhci_readl(xhci, &xhci->dba->doorbell[slot_id]);
+
+	return 0;
+}
+
 /* Caller must have locked xhci->lock */
 int queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		struct urb *urb, int slot_id, unsigned int ep_index)