aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
authorYoshihiro Shimoda <shimoda.yoshihiro@renesas.com>2009-05-26 18:24:34 +0900
committerGreg Kroah-Hartman <gregkh@suse.de>2009-06-15 21:44:46 -0700
commit5effabbe9e6e0089f7afdde35cb51e8c8b4cf6bc (patch)
treed70e441a981a850a2df1bef79a75b8bad27bccf7 /drivers/usb
parent32ebbe7b6ad44ae9c276419710b56de6ba705303 (diff)
USB: r8a66597-hcd: use platform_data instead of module_param
CPU/board specific parameters (PLL clock, vif etc...) can be set by platform_data instead of module_param. v2: remove irq_sense member in platform_data because it can OR in IRQF_TRIGGER_LOW or IRQF_TRIGGER_FALLING against IORESOURCE_IRQ in the struct resource. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Reviewed-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/host/r8a66597-hcd.c60
-rw-r--r--drivers/usb/host/r8a66597.h38
2 files changed, 48 insertions, 50 deletions
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 3e1216ad86b..56976cc0352 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -46,31 +46,10 @@ MODULE_LICENSE("GPL");
MODULE_AUTHOR("Yoshihiro Shimoda");
MODULE_ALIAS("platform:r8a66597_hcd");
-#define DRIVER_VERSION "10 Apr 2008"
+#define DRIVER_VERSION "2009-05-26"
static const char hcd_name[] = "r8a66597_hcd";
-/* module parameters */
-#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-static unsigned short clock = XTAL12;
-module_param(clock, ushort, 0644);
-MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 "
- "(default=0)");
-#endif
-
-static unsigned short vif = LDRV;
-module_param(vif, ushort, 0644);
-MODULE_PARM_DESC(vif, "input VIF: 3.3V=32768, 1.5V=0(default=32768)");
-
-static unsigned short endian;
-module_param(endian, ushort, 0644);
-MODULE_PARM_DESC(endian, "data endian: big=256, little=0 (default=0)");
-
-static unsigned short irq_sense = 0xff;
-module_param(irq_sense, ushort, 0644);
-MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=32, falling edge=0 "
- "(default=32)");
-
static void packet_write(struct r8a66597 *r8a66597, u16 pipenum);
static int r8a66597_get_frame(struct usb_hcd *hcd);
@@ -136,7 +115,8 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
}
} while ((tmp & USBE) != USBE);
r8a66597_bclr(r8a66597, USBE, SYSCFG0);
- r8a66597_mdfy(r8a66597, clock, XTAL, SYSCFG0);
+ r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata), XTAL,
+ SYSCFG0);
i = 0;
r8a66597_bset(r8a66597, XCKE, SYSCFG0);
@@ -203,6 +183,9 @@ static void r8a66597_disable_port(struct r8a66597 *r8a66597, int port)
static int enable_controller(struct r8a66597 *r8a66597)
{
int ret, port;
+ u16 vif = r8a66597->pdata->vif ? LDRV : 0;
+ u16 irq_sense = r8a66597->irq_sense_low ? INTL : 0;
+ u16 endian = r8a66597->pdata->endian ? BIGEND : 0;
ret = r8a66597_clock_enable(r8a66597);
if (ret < 0)
@@ -2418,6 +2401,12 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
goto clean_up;
}
+ if (pdev->dev.platform_data == NULL) {
+ dev_err(&pdev->dev, "no platform data\n");
+ ret = -ENODEV;
+ goto clean_up;
+ }
+
/* initialize hcd */
hcd = usb_create_hcd(&r8a66597_hc_driver, &pdev->dev, (char *)hcd_name);
if (!hcd) {
@@ -2428,6 +2417,8 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
r8a66597 = hcd_to_r8a66597(hcd);
memset(r8a66597, 0, sizeof(struct r8a66597));
dev_set_drvdata(&pdev->dev, r8a66597);
+ r8a66597->pdata = pdev->dev.platform_data;
+ r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
@@ -2458,29 +2449,6 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
hcd->rsrc_start = res->start;
- /* irq_sense setting on cmdline takes precedence over resource
- * settings, so the introduction of irqflags in IRQ resourse
- * won't disturb existing setups */
- switch (irq_sense) {
- case INTL:
- irq_trigger = IRQF_TRIGGER_LOW;
- break;
- case 0:
- irq_trigger = IRQF_TRIGGER_FALLING;
- break;
- case 0xff:
- if (irq_trigger)
- irq_sense = (irq_trigger & IRQF_TRIGGER_LOW) ?
- INTL : 0;
- else {
- irq_sense = INTL;
- irq_trigger = IRQF_TRIGGER_LOW;
- }
- break;
- default:
- dev_err(&pdev->dev, "Unknown irq_sense value.\n");
- }
-
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to add hcd\n");
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index f49208f1bb7..d72680b433f 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -30,6 +30,8 @@
#include <linux/clk.h>
#endif
+#include <linux/usb/r8a66597.h>
+
#define SYSCFG0 0x00
#define SYSCFG1 0x02
#define SYSSTS0 0x04
@@ -488,6 +490,7 @@ struct r8a66597 {
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
struct clk *clk;
#endif
+ struct r8a66597_platdata *pdata;
struct r8a66597_device device0;
struct r8a66597_root_hub root_hub[R8A66597_MAX_ROOT_HUB];
struct list_head pipe_queue[R8A66597_MAX_NUM_PIPE];
@@ -506,6 +509,7 @@ struct r8a66597 {
unsigned long child_connect_map[4];
unsigned bus_suspended:1;
+ unsigned irq_sense_low:1;
};
static inline struct r8a66597 *hcd_to_r8a66597(struct usb_hcd *hcd)
@@ -660,10 +664,36 @@ static inline void r8a66597_port_power(struct r8a66597 *r8a66597, int port,
{
unsigned long dvstctr_reg = get_dvstctr_reg(port);
- if (power)
- r8a66597_bset(r8a66597, VBOUT, dvstctr_reg);
- else
- r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg);
+ if (r8a66597->pdata->port_power) {
+ r8a66597->pdata->port_power(port, power);
+ } else {
+ if (power)
+ r8a66597_bset(r8a66597, VBOUT, dvstctr_reg);
+ else
+ r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg);
+ }
+}
+
+static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata)
+{
+ u16 clock = 0;
+
+ switch (pdata->xtal) {
+ case R8A66597_PLATDATA_XTAL_12MHZ:
+ clock = XTAL12;
+ break;
+ case R8A66597_PLATDATA_XTAL_24MHZ:
+ clock = XTAL24;
+ break;
+ case R8A66597_PLATDATA_XTAL_48MHZ:
+ clock = XTAL48;
+ break;
+ default:
+ printk(KERN_ERR "r8a66597: platdata clock is wrong.\n");
+ break;
+ }
+
+ return clock;
}
#define get_pipectr_addr(pipenum) (PIPE1CTR + (pipenum - 1) * 2)