Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits)
  [XFRM]: Allow packet drops during larval state resolution.
  [CASSINI]: Check pci_set_mwi() return value.
  [NET]: "wrong timeout value" in sk_wait_data() v2
  [NETFILTER]: nf_nat_h323: call set_h225_addr instead of set_h225_addr_hook
  [NETFILTER]: nf_conntrack_h323: add missing T.120 address in OLCA
  [NETFILTER]: nf_conntrack_h323: remove unnecessary process of Information signal
  [NETFILTER]: nf_conntrack_h323: fix get_h225_addr() for IPv6 address access
  [NETFILTER]: nf_conntrack_h323: fix ASN.1 types
  [NETFILTER]: nf_conntrack_ftp: fix newline sequence number calculation
  [NETFILTER]: nf_conntrack_ftp: fix newline sequence number update
  [NET_SCHED]: sch_htb: fix event cache time calculation
  [DCCP]: Fix build warning when debugging is disabled.
  [TIPC]: Fixed erroneous introduction of for_each_netdev
  [RTNETLINK]: Fix sending netlink message when replace route.
  [TR]: Use menuconfig objects.
  [ARCNET]: Use menuconfig objects.
  [TIPC]: Use menuconfig objects.
  [SCTP]: Use menuconfig objects.
  [IPVS]: Use menuconfig objects.
  [DCCP]: Use menuconfig objects.
  ...

6 files changed, 48 insertions, 54 deletions

diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index 057efbc55d3..3800bc0cb2e 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -47,7 +47,8 @@ static char const rcsid[] =
 #include <linux/bitops.h>
 #include <linux/wait.h>
 #include <linux/jiffies.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
+
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
@@ -2435,7 +2436,7 @@ idt77252_open(struct atm_vcc *vcc)
 
 	set_bit(ATM_VF_ADDR, &vcc->flags);
 
-	down(&card->mutex);
+	mutex_lock(&card->mutex);
 
 	OPRINTK("%s: opening vpi.vci: %d.%d\n", card->name, vpi, vci);
 
@@ -2446,7 +2447,7 @@ idt77252_open(struct atm_vcc *vcc)
 		break;
 	default:
 		printk("%s: Unsupported AAL: %d\n", card->name, vcc->qos.aal);
-		up(&card->mutex);
+		mutex_unlock(&card->mutex);
 		return -EPROTONOSUPPORT;
 	}
 
@@ -2455,7 +2456,7 @@ idt77252_open(struct atm_vcc *vcc)
 		card->vcs[index] = kzalloc(sizeof(struct vc_map), GFP_KERNEL);
 		if (!card->vcs[index]) {
 			printk("%s: can't alloc vc in open()\n", card->name);
-			up(&card->mutex);
+			mutex_unlock(&card->mutex);
 			return -ENOMEM;
 		}
 		card->vcs[index]->card = card;
@@ -2484,14 +2485,14 @@ idt77252_open(struct atm_vcc *vcc)
 	if (inuse) {
 		printk("%s: %s vci already in use.\n", card->name,
 		       inuse == 1 ? "tx" : inuse == 2 ? "rx" : "tx and rx");
-		up(&card->mutex);
+		mutex_unlock(&card->mutex);
 		return -EADDRINUSE;
 	}
 
 	if (vcc->qos.txtp.traffic_class != ATM_NONE) {
 		error = idt77252_init_tx(card, vc, vcc, &vcc->qos);
 		if (error) {
-			up(&card->mutex);
+			mutex_unlock(&card->mutex);
 			return error;
 		}
 	}
@@ -2499,14 +2500,14 @@ idt77252_open(struct atm_vcc *vcc)
 	if (vcc->qos.rxtp.traffic_class != ATM_NONE) {
 		error = idt77252_init_rx(card, vc, vcc, &vcc->qos);
 		if (error) {
-			up(&card->mutex);
+			mutex_unlock(&card->mutex);
 			return error;
 		}
 	}
 
 	set_bit(ATM_VF_READY, &vcc->flags);
 
-	up(&card->mutex);
+	mutex_unlock(&card->mutex);
 	return 0;
 }
 
@@ -2520,7 +2521,7 @@ idt77252_close(struct atm_vcc *vcc)
 	unsigned long addr;
 	unsigned long timeout;
 
-	down(&card->mutex);
+	mutex_lock(&card->mutex);
 
 	IPRINTK("%s: idt77252_close: vc = %d (%d.%d)\n",
 		card->name, vc->index, vcc->vpi, vcc->vci);
@@ -2591,7 +2592,7 @@ done:
 		free_scq(card, vc->scq);
 	}
 
-	up(&card->mutex);
+	mutex_unlock(&card->mutex);
 }
 
 static int
@@ -2602,7 +2603,7 @@ idt77252_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flags)
 	struct vc_map *vc = vcc->dev_data;
 	int error = 0;
 
-	down(&card->mutex);
+	mutex_lock(&card->mutex);
 
 	if (qos->txtp.traffic_class != ATM_NONE) {
 	    	if (!test_bit(VCF_TX, &vc->flags)) {
@@ -2648,7 +2649,7 @@ idt77252_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flags)
 	set_bit(ATM_VF_HASQOS, &vcc->flags);
 
 out:
-	up(&card->mutex);
+	mutex_unlock(&card->mutex);
 	return error;
 }
 
@@ -3709,7 +3710,7 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id)
 	membase = pci_resource_start(pcidev, 1);
 	srambase = pci_resource_start(pcidev, 2);
 
-	init_MUTEX(&card->mutex);
+	mutex_init(&card->mutex);
 	spin_lock_init(&card->cmd_lock);
 	spin_lock_init(&card->tst_lock);
 
diff --git a/drivers/atm/idt77252.h b/drivers/atm/idt77252.h
index 544b3973829..6f2b4a5875f 100644
--- a/drivers/atm/idt77252.h
+++ b/drivers/atm/idt77252.h
@@ -37,7 +37,7 @@
 #include <linux/ptrace.h>
 #include <linux/skbuff.h>
 #include <linux/workqueue.h>
-
+#include <linux/mutex.h>
 
 /*****************************************************************************/
 /*                                                                           */
@@ -359,7 +359,7 @@ struct idt77252_dev
 	unsigned long		srambase;	/* SAR's sram  base address */
 	void __iomem		*fbq[4];	/* FBQ fill addresses */
 
-	struct semaphore	mutex;
+	struct mutex		mutex;
 	spinlock_t		cmd_lock;	/* for r/w utility/sram */
 
 	unsigned long		softstat;
diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c
index b0238b46dde..7e04dd69f60 100644
--- a/drivers/bluetooth/hci_usb.c
+++ b/drivers/bluetooth/hci_usb.c
@@ -115,11 +115,11 @@ static struct usb_device_id blacklist_ids[] = {
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = HCI_BCM92035 },
 
 	/* Broadcom BCM2045 */
-	{ USB_DEVICE(0x0a5c, 0x2101), .driver_info = HCI_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x0a5c, 0x2101), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
 
 	/* IBM/Lenovo ThinkPad with Broadcom chip */
-	{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = HCI_WRONG_SCO_MTU },
-	{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = HCI_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
 
 	/* Targus ACB10US */
 	{ USB_DEVICE(0x0a5c, 0x2100), .driver_info = HCI_RESET },
@@ -128,17 +128,17 @@ static struct usb_device_id blacklist_ids[] = {
 	{ USB_DEVICE(0x0a5c, 0x2111), .driver_info = HCI_RESET },
 
 	/* HP laptop with Broadcom chip */
-	{ USB_DEVICE(0x03f0, 0x171d), .driver_info = HCI_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x03f0, 0x171d), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
 
 	/* Dell laptop with Broadcom chip */
-	{ USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
 
 	/* Microsoft Wireless Transceiver for Bluetooth 2.0 */
 	{ USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET },
 
 	/* Kensington Bluetooth USB adapter */
 	{ USB_DEVICE(0x047d, 0x105d), .driver_info = HCI_RESET },
-	{ USB_DEVICE(0x047d, 0x105e), .driver_info = HCI_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x047d, 0x105e), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
 
 	/* ISSC Bluetooth Adapter v3.1 */
 	{ USB_DEVICE(0x1131, 0x1001), .driver_info = HCI_RESET },
@@ -148,8 +148,8 @@ static struct usb_device_id blacklist_ids[] = {
 	{ USB_DEVICE(0x0400, 0x080a), .driver_info = HCI_BROKEN_ISOC },
 
 	/* Belkin F8T012 and F8T013 devices */
-	{ USB_DEVICE(0x050d, 0x0012), .driver_info = HCI_WRONG_SCO_MTU },
-	{ USB_DEVICE(0x050d, 0x0013), .driver_info = HCI_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x050d, 0x0012), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x050d, 0x0013), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
 
 	/* Digianswer devices */
 	{ USB_DEVICE(0x08fd, 0x0001), .driver_info = HCI_DIGIANSWER },
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index 7284ccad0b9..4030274fe78 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -2,10 +2,8 @@
 # Arcnet configuration
 #
 
-menu "ARCnet devices"
+menuconfig ARCNET
 	depends on NETDEVICES && (ISA || PCI)
-
-config ARCNET
 	tristate "ARCnet support"
 	---help---
 	  If you have a network card of this type, say Y and check out the
@@ -25,9 +23,10 @@ config ARCNET
 	  <file:Documentation/networking/net-modules.txt>.  The module will
 	  be called arcnet.
 
+if ARCNET
+
 config ARCNET_1201
 	tristate "Enable standard ARCNet packet format (RFC 1201)"
-	depends on ARCNET
 	help
 	  This allows you to use RFC1201 with your ARCnet card via the virtual
 	  arc0 device.  You need to say Y here to communicate with
@@ -38,7 +37,6 @@ config ARCNET_1201
 
 config ARCNET_1051
 	tristate "Enable old ARCNet packet format (RFC 1051)"
-	depends on ARCNET
 	---help---
 	  This allows you to use RFC1051 with your ARCnet card via the virtual
 	  arc0s device. You only need arc0s if you want to talk to ARCnet
@@ -53,7 +51,6 @@ config ARCNET_1051
 
 config ARCNET_RAW
 	tristate "Enable raw mode packet interface"
-	depends on ARCNET
 	help
 	  ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
 	  to work unless talking to a copy of the same Linux arcnet driver,
@@ -61,7 +58,6 @@ config ARCNET_RAW
 
 config ARCNET_CAP
 	tristate "Enable CAP mode packet interface"
-	depends on ARCNET
 	help
 	  ARCnet "cap mode" packet encapsulation. Used to get the hardware
           acknowledge back to userspace. After the initial protocol byte every
@@ -80,7 +76,6 @@ config ARCNET_CAP
 
 config ARCNET_COM90xx
 	tristate "ARCnet COM90xx (normal) chipset driver"
-	depends on ARCNET
 	help
 	  This is the chipset driver for the standard COM90xx cards. If you
 	  have always used the old ARCnet driver without knowing what type of
@@ -92,7 +87,6 @@ config ARCNET_COM90xx
 
 config ARCNET_COM90xxIO
 	tristate "ARCnet COM90xx (IO mapped) chipset driver"
-	depends on ARCNET
 	---help---
 	  This is the chipset driver for the COM90xx cards, using them in
 	  IO-mapped mode instead of memory-mapped mode. This is slower than
@@ -105,7 +99,6 @@ config ARCNET_COM90xxIO
 
 config ARCNET_RIM_I
 	tristate "ARCnet COM90xx (RIM I) chipset driver"
-	depends on ARCNET
 	---help---
 	  This is yet another chipset driver for the COM90xx cards, but this
 	  time only using memory-mapped mode, and no IO ports at all. This
@@ -118,7 +111,6 @@ config ARCNET_RIM_I
 
 config ARCNET_COM20020
 	tristate "ARCnet COM20020 chipset driver"
-	depends on ARCNET
 	help
 	  This is the driver for the new COM20020 chipset. It supports such
 	  things as promiscuous mode, so packet sniffing is possible, and
@@ -136,5 +128,4 @@ config ARCNET_COM20020_PCI
 	tristate "Support for COM20020 on PCI"
 	depends on ARCNET_COM20020 && PCI
 
-endmenu
-
+endif # ARCNET
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 4aec747d9e4..9fe3a38883e 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -4919,7 +4919,10 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	pci_cmd &= ~PCI_COMMAND_SERR;
 	pci_cmd |= PCI_COMMAND_PARITY;
 	pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
-	pci_set_mwi(pdev);
+	if (pci_set_mwi(pdev))
+		printk(KERN_WARNING PFX "Could enable MWI for %s\n",
+		       pci_name(pdev));
+
 	/*
 	 * On some architectures, the default cache line size set
 	 * by pci_set_mwi reduces perforamnce.  We have to increase
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index 99c4c1922f1..e6b2e06493e 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -2,12 +2,10 @@
 # Token Ring driver configuration
 #
 
-menu "Token Ring devices"
-	depends on NETDEVICES && !UML
-
 # So far, we only have PCI, ISA, and MCA token ring devices
-config TR
+menuconfig TR
 	bool "Token Ring driver support"
+	depends on NETDEVICES && !UML
 	depends on (PCI || ISA || MCA || CCW)
 	select LLC
 	help
@@ -20,9 +18,11 @@ config TR
 	  from <http://www.tldp.org/docs.html#howto>. Most people can
 	  say N here.
 
+if TR
+
 config IBMTR
 	tristate "IBM Tropic chipset based adapter support"
-	depends on TR && (ISA || MCA)
+	depends on ISA || MCA
 	---help---
 	  This is support for all IBM Token Ring cards that don't use DMA. If
 	  you have such a beast, say Y and read the Token-Ring mini-HOWTO,
@@ -36,7 +36,7 @@ config IBMTR
 
 config IBMOL
 	tristate "IBM Olympic chipset PCI adapter support"
-	depends on TR && PCI
+	depends on PCI
 	---help---
 	  This is support for all non-Lanstreamer IBM PCI Token Ring Cards.
 	  Specifically this is all IBM PCI, PCI Wake On Lan, PCI II, PCI II
@@ -54,7 +54,7 @@ config IBMOL
 
 config IBMLS
 	tristate "IBM Lanstreamer chipset PCI adapter support"
-	depends on TR && PCI && !64BIT
+	depends on PCI && !64BIT
 	help
 	  This is support for IBM Lanstreamer PCI Token Ring Cards.
 
@@ -66,7 +66,7 @@ config IBMLS
 
 config 3C359
 	tristate "3Com 3C359 Token Link Velocity XL adapter support"
-	depends on TR && PCI
+	depends on PCI
 	---help---
 	  This is support for the 3Com PCI Velocity XL cards, specifically
 	  the 3Com 3C359, please note this is not for the 3C339 cards, you
@@ -84,7 +84,7 @@ config 3C359
 
 config TMS380TR
 	tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
-	depends on TR && (PCI || ISA && ISA_DMA_API || MCA)
+	depends on PCI || ISA && ISA_DMA_API || MCA
 	select FW_LOADER
 	---help---
 	  This driver provides generic support for token ring adapters
@@ -108,7 +108,7 @@ config TMS380TR
 
 config TMSPCI
 	tristate "Generic TMS380 PCI support"
-	depends on TR && TMS380TR && PCI
+	depends on TMS380TR && PCI
 	---help---
 	  This tms380 module supports generic TMS380-based PCI cards.
 
@@ -123,7 +123,7 @@ config TMSPCI
 
 config SKISA
 	tristate "SysKonnect TR4/16 ISA support"
-	depends on TR && TMS380TR && ISA
+	depends on TMS380TR && ISA
 	help
 	  This tms380 module supports SysKonnect TR4/16 ISA cards.
 
@@ -135,7 +135,7 @@ config SKISA
 
 config PROTEON
 	tristate "Proteon ISA support"
-	depends on TR && TMS380TR && ISA
+	depends on TMS380TR && ISA
 	help
 	  This tms380 module supports Proteon ISA cards.
 
@@ -148,7 +148,7 @@ config PROTEON
 
 config ABYSS
 	tristate "Madge Smart 16/4 PCI Mk2 support"
-	depends on TR && TMS380TR && PCI
+	depends on TMS380TR && PCI
 	help
 	  This tms380 module supports the Madge Smart 16/4 PCI Mk2
 	  cards (51-02).
@@ -158,7 +158,7 @@ config ABYSS
 
 config MADGEMC
 	tristate "Madge Smart 16/4 Ringnode MicroChannel"
-	depends on TR && TMS380TR && MCA
+	depends on TMS380TR && MCA
 	help
 	  This tms380 module supports the Madge Smart 16/4 MC16 and MC32
 	  MicroChannel adapters.
@@ -168,7 +168,7 @@ config MADGEMC
 
 config SMCTR
 	tristate "SMC ISA/MCA adapter support"
-	depends on TR && (ISA || MCA_LEGACY) && (BROKEN || !64BIT)
+	depends on (ISA || MCA_LEGACY) && (BROKEN || !64BIT)
 	---help---
 	  This is support for the ISA and MCA SMC Token Ring cards,
 	  specifically SMC TokenCard Elite (8115T) and SMC TokenCard Elite/A
@@ -182,5 +182,4 @@ config SMCTR
 	  To compile this driver as a module, choose M here: the module will be
 	  called smctr.
 
-endmenu
-
+endif # TR