Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (21 commits)
  USB: musb: fix srp sysfs entry deletion
  USB: musb: resume suspended root hub on disconnect
  USB: musb: use right poll limit for low speed devices
  USB: musb: be careful with 64K+ transfer lengths, host side
  USB: musb: fix data toggle saving with shared FIFO
  USB: musb: host endpoint_disable() oops fixes
  USB: musb: fix urb_dequeue() method
  USB: musb: fix musb_host_tx() for shared endpoint FIFO
  USB: musb: be careful with 64K+ transfer lengths (gadget side)
  usb: musb: make Davinci *work* in mainline
  USB: usb_get_string should check the descriptor type
  USB: gadget: fix build error in omap_apollon_2420_defconfig
  USB: g_file_storage: automatically disable stalls under Atmel
  USB: usb-storage: add IGNORE_RESIDUE flag for Genesys Logic adapters
  USB: Quirk for Hummingbird huc56s / Conexant ACM modem
  USB: serial: add support for second revision of Ericsson F3507G WWAN card
  USB: cdc-acm: add usb id for motomagx phones
  USB: option: add BenQ 3g modem information
  usb: gadget: obex: select correct ep descriptors
  USB: EHCI: slow down ITD reuse
  ...

16 files changed, 167 insertions, 72 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 326dd7f65ee..b3d5a23ab56 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1376,6 +1376,15 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
+	},
+	{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
+	.driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on
+					   data interface instead of
+					   communications interface.
+					   Maybe we should define a new
+					   quirk for this. */
+	},
 
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 31fb204f44c..49e7f56e0d7 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -653,7 +653,7 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type,
 		if (result <= 0 && result != -ETIMEDOUT)
 			continue;
 		if (result > 1 && ((u8 *)buf)[1] != type) {
-			result = -EPROTO;
+			result = -ENODATA;
 			continue;
 		}
 		break;
@@ -696,8 +696,13 @@ static int usb_get_string(struct usb_device *dev, unsigned short langid,
 			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
 			(USB_DT_STRING << 8) + index, langid, buf, size,
 			USB_CTRL_GET_TIMEOUT);
-		if (!(result == 0 || result == -EPIPE))
-			break;
+		if (result == 0 || result == -EPIPE)
+			continue;
+		if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) {
+			result = -ENODATA;
+			continue;
+		}
+		break;
 	}
 	return result;
 }
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 3219d137340..e55fef52a5d 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -191,6 +191,7 @@ config USB_GADGET_OMAP
 	boolean "OMAP USB Device Controller"
 	depends on ARCH_OMAP
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
+	select USB_OTG_UTILS if ARCH_OMAP
 	help
 	   Many Texas Instruments OMAP processors have flexible full
 	   speed USB device controllers, with support for up to 30
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index 80c2e7e9622..38aa896cc5d 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -366,9 +366,9 @@ obex_bind(struct usb_configuration *c, struct usb_function *f)
 		f->hs_descriptors = usb_copy_descriptors(hs_function);
 
 		obex->hs.obex_in = usb_find_endpoint(hs_function,
-				f->descriptors, &obex_hs_ep_in_desc);
+				f->hs_descriptors, &obex_hs_ep_in_desc);
 		obex->hs.obex_out = usb_find_endpoint(hs_function,
-				f->descriptors, &obex_hs_ep_out_desc);
+				f->hs_descriptors, &obex_hs_ep_out_desc);
 	}
 
 	/* Avoid letting this gadget enumerate until the userspace
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index b10fa31cc91..1ab9dac7e12 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3879,7 +3879,11 @@ static int __init check_parameters(struct fsg_dev *fsg)
 	mod_data.protocol_type = USB_SC_SCSI;
 	mod_data.protocol_name = "Transparent SCSI";
 
-	if (gadget_is_sh(fsg->gadget))
+	/* Some peripheral controllers are known not to be able to
+	 * halt bulk endpoints correctly.  If one of them is present,
+	 * disable stalls.
+	 */
+	if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget))
 		mod_data.can_stall = 0;
 
 	if (mod_data.release == 0xffff) {	// Parameter wasn't set
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index f3c6703cffd..d8d9a52a44b 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -404,7 +404,10 @@ static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num,
 	}
 	if (zlt)
 		tmp |= EP_QUEUE_HEAD_ZLT_SEL;
+
 	p_QH->max_pkt_length = cpu_to_le32(tmp);
+	p_QH->next_dtd_ptr = 1;
+	p_QH->size_ioc_int_sts = 0;
 
 	return;
 }
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 4725d15d096..e551bb38852 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -485,6 +485,7 @@ static int ehci_init(struct usb_hcd *hcd)
 	 * periodic_size can shrink by USBCMD update if hcc_params allows.
 	 */
 	ehci->periodic_size = DEFAULT_I_TDPS;
+	INIT_LIST_HEAD(&ehci->cached_itd_list);
 	if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
 		return retval;
 
@@ -497,6 +498,7 @@ static int ehci_init(struct usb_hcd *hcd)
 
 	ehci->reclaim = NULL;
 	ehci->next_uframe = -1;
+	ehci->clock_frame = -1;
 
 	/*
 	 * dedicate a qh for the async ring head, since we couldn't unlink
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index 0431397836f..10d52919abb 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -128,6 +128,7 @@ static inline void qh_put (struct ehci_qh *qh)
 
 static void ehci_mem_cleanup (struct ehci_hcd *ehci)
 {
+	free_cached_itd_list(ehci);
 	if (ehci->async)
 		qh_put (ehci->async);
 	ehci->async = NULL;
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index a081ee65bde..07bcb931021 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1004,7 +1004,8 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream)
 
 		is_in = (stream->bEndpointAddress & USB_DIR_IN) ? 0x10 : 0;
 		stream->bEndpointAddress &= 0x0f;
-		stream->ep->hcpriv = NULL;
+		if (stream->ep)
+			stream->ep->hcpriv = NULL;
 
 		if (stream->rescheduled) {
 			ehci_info (ehci, "ep%d%s-iso rescheduled "
@@ -1653,14 +1654,28 @@ itd_complete (
 			(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
 	}
 	iso_stream_put (ehci, stream);
-	/* OK to recycle this ITD now that its completion callback ran. */
+
 done:
 	usb_put_urb(urb);
 	itd->urb = NULL;
-	itd->stream = NULL;
-	list_move(&itd->itd_list, &stream->free_list);
-	iso_stream_put(ehci, stream);
-
+	if (ehci->clock_frame != itd->frame || itd->index[7] != -1) {
+		/* OK to recycle this ITD now. */
+		itd->stream = NULL;
+		list_move(&itd->itd_list, &stream->free_list);
+		iso_stream_put(ehci, stream);
+	} else {
+		/* HW might remember this ITD, so we can't recycle it yet.
+		 * Move it to a safe place until a new frame starts.
+		 */
+		list_move(&itd->itd_list, &ehci->cached_itd_list);
+		if (stream->refcount == 2) {
+			/* If iso_stream_put() were called here, stream
+			 * would be freed.  Instead, just prevent reuse.
+			 */
+			stream->ep->hcpriv = NULL;
+			stream->ep = NULL;
+		}
+	}
 	return retval;
 }
 
@@ -2101,6 +2116,20 @@ done:
 
 /*-------------------------------------------------------------------------*/
 
+static void free_cached_itd_list(struct ehci_hcd *ehci)
+{
+	struct ehci_itd *itd, *n;
+
+	list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) {
+		struct ehci_iso_stream	*stream = itd->stream;
+		itd->stream = NULL;
+		list_move(&itd->itd_list, &stream->free_list);
+		iso_stream_put(ehci, stream);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
 static void
 scan_periodic (struct ehci_hcd *ehci)
 {
@@ -2115,10 +2144,17 @@ scan_periodic (struct ehci_hcd *ehci)
 	 * Touches as few pages as possible:  cache-friendly.
 	 */
 	now_uframe = ehci->next_uframe;
-	if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+	if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
 		clock = ehci_readl(ehci, &ehci->regs->frame_index);
-	else
+		clock_frame = (clock >> 3) % ehci->periodic_size;
+	} else  {
 		clock = now_uframe + mod - 1;
+		clock_frame = -1;
+	}
+	if (ehci->clock_frame != clock_frame) {
+		free_cached_itd_list(ehci);
+		ehci->clock_frame = clock_frame;
+	}
 	clock %= mod;
 	clock_frame = clock >> 3;
 
@@ -2277,6 +2313,10 @@ restart:
 			/* rescan the rest of this frame, then ... */
 			clock = now;
 			clock_frame = clock >> 3;
+			if (ehci->clock_frame != clock_frame) {
+				free_cached_itd_list(ehci);
+				ehci->clock_frame = clock_frame;
+			}
 		} else {
 			now_uframe++;
 			now_uframe %= mod;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index fb7054ccf4f..262b00c9b33 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -87,6 +87,10 @@ struct ehci_hcd {			/* one per controller */
 	int			next_uframe;	/* scan periodic, start here */
 	unsigned		periodic_sched;	/* periodic activity count */
 
+	/* list of itds completed while clock_frame was still active */
+	struct list_head	cached_itd_list;
+	unsigned		clock_frame;
+
 	/* per root hub port */
 	unsigned long		reset_done [EHCI_MAX_ROOT_PORTS];
 
@@ -220,6 +224,8 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
 	}
 }
 
+static void free_cached_itd_list(struct ehci_hcd *ehci);
+
 /*-------------------------------------------------------------------------*/
 
 #include <linux/usb/ehci_def.h>
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 5a8fd5d57a1..2dc7606f319 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -377,18 +377,8 @@ int __init musb_platform_init(struct musb *musb)
 	u32		revision;
 
 	musb->mregs += DAVINCI_BASE_OFFSET;
-#if 0
-	/* REVISIT there's something odd about clocking, this
-	 * didn't appear do the job ...
-	 */
-	musb->clock = clk_get(pDevice, "usb");
-	if (IS_ERR(musb->clock))
-		return PTR_ERR(musb->clock);
 
-	status = clk_enable(musb->clock);
-	if (status < 0)
-		return -ENODEV;
-#endif
+	clk_enable(musb->clock);
 
 	/* returns zero if e.g. not clocked */
 	revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
@@ -453,5 +443,8 @@ int musb_platform_exit(struct musb *musb)
 	}
 
 	phy_off();
+
+	clk_disable(musb->clock);
+
 	return 0;
 }
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 2cc34fa05b7..af77e465900 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -115,7 +115,7 @@
 
 
 unsigned musb_debug;
-module_param(musb_debug, uint, S_IRUGO | S_IWUSR);
+module_param_named(debug, musb_debug, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
 
 #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
@@ -767,6 +767,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 		case OTG_STATE_A_HOST:
 		case OTG_STATE_A_SUSPEND:
+			usb_hcd_resume_root_hub(musb_to_hcd(musb));
 			musb_root_disconnect(musb);
 			if (musb->a_wait_bcon != 0)
 				musb_platform_try_idle(musb, jiffies
@@ -1815,7 +1816,7 @@ static void musb_free(struct musb *musb)
 #ifdef CONFIG_SYSFS
 	device_remove_file(musb->controller, &dev_attr_mode);
 	device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	device_remove_file(musb->controller, &dev_attr_srp);
 #endif
 #endif
@@ -2063,7 +2064,7 @@ fail2:
 #ifdef CONFIG_SYSFS
 	device_remove_file(musb->controller, &dev_attr_mode);
 	device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	device_remove_file(musb->controller, &dev_attr_srp);
 #endif
 #endif
@@ -2243,10 +2244,10 @@ static int __init musb_init(void)
 	return platform_driver_probe(&musb_driver, musb_probe);
 }
 
-/* make us init after usbcore and before usb
- * gadget and host-side drivers start to register
+/* make us init after usbcore and i2c (transceivers, regulators, etc)
+ * and before usb gadget and host-side drivers start to register
  */
-subsys_initcall(musb_init);
+fs_initcall(musb_init);
 
 static void __exit musb_cleanup(void)
 {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 4ea30538798..c7ebd0867fc 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -575,7 +575,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 	struct usb_request	*request = &req->request;
 	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
 	void __iomem		*epio = musb->endpoints[epnum].regs;
-	u16			fifo_count = 0;
+	unsigned		fifo_count = 0;
 	u16			len = musb_ep->packet_sz;
 
 	csr = musb_readw(epio, MUSB_RXCSR);
@@ -687,7 +687,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 					len, fifo_count,
 					musb_ep->packet_sz);
 
-			fifo_count = min(len, fifo_count);
+			fifo_count = min_t(unsigned, len, fifo_count);
 
 #ifdef	CONFIG_USB_TUSB_OMAP_DMA
 			if (tusb_dma_omap() && musb_ep->dma) {
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index a035ceccf95..6dbbd0786a6 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -335,16 +335,11 @@ musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
 static struct musb_qh *
 musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
 {
-	int			is_in;
 	struct musb_hw_ep	*ep = qh->hw_ep;
 	struct musb		*musb = ep->musb;
+	int			is_in = usb_pipein(urb->pipe);
 	int			ready = qh->is_ready;
 
-	if (ep->is_shared_fifo)
-		is_in = 1;
-	else
-		is_in = usb_pipein(urb->pipe);
-
 	/* save toggle eagerly, for paranoia */
 	switch (qh->type) {
 	case USB_ENDPOINT_XFER_BULK:
@@ -432,7 +427,7 @@ musb_advance_schedule(struct musb *musb, struct urb *urb,
 	else
 		qh = musb_giveback(qh, urb, urb->status);
 
-	if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
+	if (qh != NULL && qh->is_ready) {
 		DBG(4, "... next ep%d %cX urb %p\n",
 				hw_ep->epnum, is_in ? 'R' : 'T',
 				next_urb(qh));
@@ -942,8 +937,8 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
 	switch (musb->ep0_stage) {
 	case MUSB_EP0_IN:
 		fifo_dest = urb->transfer_buffer + urb->actual_length;
-		fifo_count = min(len, ((u16) (urb->transfer_buffer_length
-					- urb->actual_length)));
+		fifo_count = min_t(size_t, len, urb->transfer_buffer_length -
+				   urb->actual_length);
 		if (fifo_count < len)
 			urb->status = -EOVERFLOW;
 
@@ -976,10 +971,9 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
 		}
 		/* FALLTHROUGH */
 	case MUSB_EP0_OUT:
-		fifo_count = min(qh->maxpacket, ((u16)
-				(urb->transfer_buffer_length
-				- urb->actual_length)));
-
+		fifo_count = min_t(size_t, qh->maxpacket,
+				   urb->transfer_buffer_length -
+				   urb->actual_length);
 		if (fifo_count) {
 			fifo_dest = (u8 *) (urb->transfer_buffer
 					+ urb->actual_length);
@@ -1161,7 +1155,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 	struct urb		*urb;
 	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
 	void __iomem		*epio = hw_ep->regs;
-	struct musb_qh		*qh = hw_ep->out_qh;
+	struct musb_qh		*qh = hw_ep->is_shared_fifo ? hw_ep->in_qh
+							    : hw_ep->out_qh;
 	u32			status = 0;
 	void __iomem		*mbase = musb->mregs;
 	struct dma_channel	*dma;
@@ -1308,7 +1303,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 		 * packets before updating TXCSR ... other docs disagree ...
 		 */
 		/* PIO:  start next packet in this URB */
-		wLength = min(qh->maxpacket, (u16) wLength);
+		if (wLength > qh->maxpacket)
+			wLength = qh->maxpacket;
 		musb_write_fifo(hw_ep, wLength, buf);
 		qh->segsize = wLength;
 
@@ -1867,19 +1863,21 @@ static int musb_urb_enqueue(
 	}
 	qh->type_reg = type_reg;
 
-	/* precompute rxinterval/txinterval register */
-	interval = min((u8)16, epd->bInterval);	/* log encoding */
+	/* Precompute RXINTERVAL/TXINTERVAL register */
 	switch (qh->type) {
 	case USB_ENDPOINT_XFER_INT:
-		/* fullspeed uses linear encoding */
-		if (USB_SPEED_FULL == urb->dev->speed) {
-			interval = epd->bInterval;
-			if (!interval)
-				interval = 1;
+		/*
+		 * Full/low speeds use the  linear encoding,
+		 * high speed uses the logarithmic encoding.
+		 */
+		if (urb->dev->speed <= USB_SPEED_FULL) {
+			interval = max_t(u8, epd->bInterval, 1);
+			break;
 		}
 		/* FALLTHROUGH */
 	case USB_ENDPOINT_XFER_ISOC:
-		/* iso always uses log encoding */
+		/* ISO always uses logarithmic encoding */
+		interval = min_t(u8, epd->bInterval, 16);
 		break;
 	default:
 		/* REVISIT we actually want to use NAK limits, hinting to the
@@ -2037,9 +2035,9 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 		goto done;
 
 	/* Any URB not actively programmed into endpoint hardware can be
-	 * immediately given back.  Such an URB must be at the head of its
+	 * immediately given back; that's any URB not at the head of an
 	 * endpoint queue, unless someday we get real DMA queues.  And even
-	 * then, it might not be known to the hardware...
+	 * if it's at the head, it might not be known to the hardware...
 	 *
 	 * Otherwise abort current transfer, pending dma, etc.; urb->status
 	 * has already been updated.  This is a synchronous abort; it'd be
@@ -2078,6 +2076,15 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 		qh->is_ready = 0;
 		__musb_giveback(musb, urb, 0);
 		qh->is_ready = ready;
+
+		/* If nothing else (usually musb_giveback) is using it
+		 * and its URB list has emptied, recycle this qh.
+		 */
+		if (ready && list_empty(&qh->hep->urb_list)) {
+			qh->hep->hcpriv = NULL;
+			list_del(&qh->ring);
+			kfree(qh);
+		}
 	} else
 		ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
 done:
@@ -2093,15 +2100,16 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
 	unsigned long		flags;
 	struct musb		*musb = hcd_to_musb(hcd);
 	u8			is_in = epnum & USB_DIR_IN;
-	struct musb_qh		*qh = hep->hcpriv;
-	struct urb		*urb, *tmp;
+	struct musb_qh		*qh;
+	struct urb		*urb;
 	struct list_head	*sched;
 
-	if (!qh)
-		return;
-
 	spin_lock_irqsave(&musb->lock, flags);
 
+	qh = hep->hcpriv;
+	if (qh == NULL)
+		goto exit;
+
 	switch (qh->type) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		sched = &musb->control;
@@ -2135,13 +2143,28 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
 
 		/* cleanup */
 		musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
-	} else
-		urb = NULL;
 
-	/* then just nuke all the others */
-	list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
-		musb_giveback(qh, urb, -ESHUTDOWN);
+		/* Then nuke all the others ... and advance the
+		 * queue on hw_ep (e.g. bulk ring) when we're done.
+		 */
+		while (!list_empty(&hep->urb_list)) {
+			urb = next_urb(qh);
+			urb->status = -ESHUTDOWN;
+			musb_advance_schedule(musb, urb, qh->hw_ep, is_in);
+		}
+	} else {
+		/* Just empty the queue; the hardware is busy with
+		 * other transfers, and since !qh->is_ready nothing
+		 * will activate any of these as it advances.
+		 */
+		while (!list_empty(&hep->urb_list))
+			__musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
 
+		hep->hcpriv = NULL;
+		list_del(&qh->ring);
+		kfree(qh);
+	}
+exit:
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index bfd0b68cecc..b7c132bded7 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -294,7 +294,11 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 
 /* Ericsson products */
 #define ERICSSON_VENDOR_ID			0x0bdb
-#define ERICSSON_PRODUCT_F3507G			0x1900
+#define ERICSSON_PRODUCT_F3507G_1		0x1900
+#define ERICSSON_PRODUCT_F3507G_2		0x1902
+
+#define BENQ_VENDOR_ID				0x04a5
+#define BENQ_PRODUCT_H10			0x4068
 
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -509,7 +513,10 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
-	{ USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) },
+	{ USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_1) },
+	{ USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_2) },
+	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+	{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 50dc33a6065..6f59c8e510e 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -907,13 +907,13 @@ UNUSUAL_DEV(  0x05e3, 0x0701, 0x0000, 0xffff,
 		"Genesys Logic",
 		"USB to IDE Optical",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
+		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
 
 UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0xffff,
 		"Genesys Logic",
 		"USB to IDE Disk",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
+		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Ben Efros <ben@pc-doctor.com> */
 UNUSUAL_DEV(  0x05e3, 0x0723, 0x9451, 0x9451,