diff options
| author | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2009-08-23 15:29:05 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-09-15 12:02:20 -0700 |
| commit | 5686ecd5aef71f2035f56540184f411584db06e6 (patch) | |
| tree | db0cf13f9d256ed197f8ccc9da36b3902ac9c1b1 /drivers | |
| parent | f59a9420adbd5443339c73988a1e5f70b3e1e798 (diff) | |
Staging: rtxx70: unify NICInitRT30xxRFRegisters()
Unify RT30xx and !RT30xx code in NICInitRT30xxRFRegisters().
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/staging/rt2860/common/rtmp_init.c | 41 |
1 files changed, 12 insertions, 29 deletions
diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c index 2a352303823..92204051d02 100644 --- a/drivers/staging/rt2860/common/rtmp_init.c +++ b/drivers/staging/rt2860/common/rtmp_init.c @@ -1263,37 +1263,20 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) INT i; // Driver must read EEPROM to get RfIcType before initial RF registers // Initialize RF register to default value -#ifndef RT30xx - if (IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) ||(pAd->RfIcType == RFIC_2020))) - { - // Init RF calibration - // Driver should toggle RF R30 bit7 before init RF registers - ULONG RfReg = 0; - RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg); - RfReg |= 0x80; - RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); - RTMPusecDelay(1000); - RfReg &= 0x7F; - RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); - - // Initialize RF register to default value - for (i = 0; i < NUM_RF_REG_PARMS; i++) - { - RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value); - } - - //For RF filter Calibration - RTMPFilterCalibration(pAd); - } -#endif + if (IS_RT3070(pAd) #ifdef RT30xx - if (IS_RT3070(pAd) || IS_RT3071(pAd)) + || IS_RT3071(pAd) +#else + && (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020) +#endif + ) { // Init RF calibration // Driver should toggle RF R30 bit7 before init RF registers UINT32 RfReg = 0; +#ifdef RT30xx UINT32 data; - +#endif RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg); RfReg |= 0x80; RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); @@ -1307,7 +1290,7 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value); } - // add by johnli +#ifdef RT30xx if (IS_RT3070(pAd)) { // Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate @@ -1345,10 +1328,10 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) data &= ~(0x20); RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data); } - +#endif //For RF filter Calibration RTMPFilterCalibration(pAd); - +#ifdef RT30xx // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() if ((pAd->MACVersion & 0xffff) < 0x0211) RT30xxWriteRFRegister(pAd, RF_R27, 0x3); @@ -1363,8 +1346,8 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) // add by johnli, RF power sequence setup, load RF normal operation-mode setup RT30xxLoadRFNormalModeSetup(pAd); } - } #endif + } } #endif // RT2870 // |