Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (28 commits)
  PCI: make arch/i386/pci/common.c:pci_bf_sort static
  PCI: ibmphp_pci.c: fix NULL dereference
  pciehp: remove unnecessary pci_disable_msi
  pciehp: remove unnecessary free_irq
  PCI: rpaphp: change device tree examination
  PCI: Change memory allocation for acpiphp slots
  i2c-i801: SMBus patch for Intel ICH9
  PCI: irq: irq and pci_ids patch for Intel ICH9
  PCI: pci_{enable,disable}_device() nestable ports
  PCI: switch pci_{enable,disable}_device() to be nestable
  PCI: arch/i386/kernel/pci-dma.c: ioremap balanced with iounmap
  pci/i386: style cleanups
  PCI: Block on access to temporarily unavailable pci device
  pci: fix __pci_register_driver error handling
  pci: clear osc support flags if no _OSC method
  acpiphp: fix missing acpiphp_glue_exit()
  acpiphp: fix use of list_for_each macro
  Altix: Initial ACPI support - ROM shadowing.
  Altix: SN ACPI hotplug support.
  Altix: Add initial ACPI IO support
  ...

23 files changed, 263 insertions, 216 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 510816c16da..04bee524e31 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -125,6 +125,7 @@ config I2C_I801
 	    ICH7
 	    ESB2
 	    ICH8
+	    ICH9
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index bbb2fbee836..c7be2fdbd86 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -33,6 +33,7 @@
     ICH7		27DA
     ESB2		269B
     ICH8		283E
+    ICH9		2930
     This driver supports several versions of Intel's I/O Controller Hubs (ICH).
     For SMBus support, they are similar to the PIIX4 and are part
     of Intel's '810' and other chipsets.
@@ -457,6 +458,7 @@ static struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
 	{ 0, }
 };
 
diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c
index 62f1ac08332..8287f95c8c4 100644
--- a/drivers/message/i2o/pci.c
+++ b/drivers/message/i2o/pci.c
@@ -320,7 +320,6 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
 	struct i2o_controller *c;
 	int rc;
 	struct pci_dev *i960 = NULL;
-	int enabled = pdev->is_enabled;
 
 	printk(KERN_INFO "i2o: Checking for PCI I2O controllers...\n");
 
@@ -330,12 +329,11 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
 		return -ENODEV;
 	}
 
-	if (!enabled)
-		if ((rc = pci_enable_device(pdev))) {
-			printk(KERN_WARNING "i2o: couldn't enable device %s\n",
-			       pci_name(pdev));
-			return rc;
-		}
+	if ((rc = pci_enable_device(pdev))) {
+		printk(KERN_WARNING "i2o: couldn't enable device %s\n",
+		       pci_name(pdev));
+		return rc;
+	}
 
 	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
 		printk(KERN_WARNING "i2o: no suitable DMA found for %s\n",
@@ -442,8 +440,7 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
 	i2o_iop_free(c);
 
       disable:
-	if (!enabled)
-		pci_disable_device(pdev);
+	pci_disable_device(pdev);
 
 	return rc;
 }
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 3cfb0a3575e..f1dd81a1d59 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -19,7 +19,7 @@ config PCI_MSI
 
 config PCI_MULTITHREAD_PROBE
 	bool "PCI Multi-threaded probe (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL && BROKEN
+	depends on PCI && EXPERIMENTAL
 	help
 	  Say Y here if you want the PCI core to spawn a new thread for
 	  every PCI device that is probed.  This can cause a huge
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index ea16805a153..73a58c73d52 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -1,6 +1,7 @@
 #include <linux/pci.h>
 #include <linux/module.h>
 #include <linux/ioport.h>
+#include <linux/wait.h>
 
 #include "pci.h"
 
@@ -63,30 +64,42 @@ EXPORT_SYMBOL(pci_bus_write_config_byte);
 EXPORT_SYMBOL(pci_bus_write_config_word);
 EXPORT_SYMBOL(pci_bus_write_config_dword);
 
-static u32 pci_user_cached_config(struct pci_dev *dev, int pos)
-{
-	u32 data;
+/*
+ * The following routines are to prevent the user from accessing PCI config
+ * space when it's unsafe to do so.  Some devices require this during BIST and
+ * we're required to prevent it during D-state transitions.
+ *
+ * We have a bit per device to indicate it's blocked and a global wait queue
+ * for callers to sleep on until devices are unblocked.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait);
 
-	data = dev->saved_config_space[pos/sizeof(dev->saved_config_space[0])];
-	data >>= (pos % sizeof(dev->saved_config_space[0])) * 8;
-	return data;
+static noinline void pci_wait_ucfg(struct pci_dev *dev)
+{
+	DECLARE_WAITQUEUE(wait, current);
+
+	__add_wait_queue(&pci_ucfg_wait, &wait);
+	do {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		spin_unlock_irq(&pci_lock);
+		schedule();
+		spin_lock_irq(&pci_lock);
+	} while (dev->block_ucfg_access);
+	__remove_wait_queue(&pci_ucfg_wait, &wait);
 }
 
 #define PCI_USER_READ_CONFIG(size,type)					\
 int pci_user_read_config_##size						\
 	(struct pci_dev *dev, int pos, type *val)			\
 {									\
-	unsigned long flags;						\
 	int ret = 0;							\
 	u32 data = -1;							\
 	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
-	spin_lock_irqsave(&pci_lock, flags);				\
-	if (likely(!dev->block_ucfg_access))				\
-		ret = dev->bus->ops->read(dev->bus, dev->devfn,		\
+	spin_lock_irq(&pci_lock);					\
+	if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev);	\
+	ret = dev->bus->ops->read(dev->bus, dev->devfn,			\
 					pos, sizeof(type), &data);	\
-	else if (pos < sizeof(dev->saved_config_space))			\
-		data = pci_user_cached_config(dev, pos); 		\
-	spin_unlock_irqrestore(&pci_lock, flags);			\
+	spin_unlock_irq(&pci_lock);					\
 	*val = (type)data;						\
 	return ret;							\
 }
@@ -95,14 +108,13 @@ int pci_user_read_config_##size						\
 int pci_user_write_config_##size					\
 	(struct pci_dev *dev, int pos, type val)			\
 {									\
-	unsigned long flags;						\
 	int ret = -EIO;							\
 	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
-	spin_lock_irqsave(&pci_lock, flags);				\
-	if (likely(!dev->block_ucfg_access))				\
-		ret = dev->bus->ops->write(dev->bus, dev->devfn,	\
+	spin_lock_irq(&pci_lock);					\
+	if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev);	\
+	ret = dev->bus->ops->write(dev->bus, dev->devfn,		\
 					pos, sizeof(type), val);	\
-	spin_unlock_irqrestore(&pci_lock, flags);			\
+	spin_unlock_irq(&pci_lock);					\
 	return ret;							\
 }
 
@@ -117,21 +129,23 @@ PCI_USER_WRITE_CONFIG(dword, u32)
  * pci_block_user_cfg_access - Block userspace PCI config reads/writes
  * @dev:	pci device struct
  *
- * This function blocks any userspace PCI config accesses from occurring.
- * When blocked, any writes will be bit bucketed and reads will return the
- * data saved using pci_save_state for the first 64 bytes of config
- * space and return 0xff for all other config reads.
- **/
+ * When user access is blocked, any reads or writes to config space will
+ * sleep until access is unblocked again.  We don't allow nesting of
+ * block/unblock calls.
+ */
 void pci_block_user_cfg_access(struct pci_dev *dev)
 {
 	unsigned long flags;
+	int was_blocked;
 
-	pci_save_state(dev);
-
-	/* spinlock to synchronize with anyone reading config space now */
 	spin_lock_irqsave(&pci_lock, flags);
+	was_blocked = dev->block_ucfg_access;
 	dev->block_ucfg_access = 1;
 	spin_unlock_irqrestore(&pci_lock, flags);
+
+	/* If we BUG() inside the pci_lock, we're guaranteed to hose
+	 * the machine */
+	BUG_ON(was_blocked);
 }
 EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);
 
@@ -140,14 +154,19 @@ EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);
  * @dev:	pci device struct
  *
  * This function allows userspace PCI config accesses to resume.
- **/
+ */
 void pci_unblock_user_cfg_access(struct pci_dev *dev)
 {
 	unsigned long flags;
 
-	/* spinlock to synchronize with anyone reading saved config space */
 	spin_lock_irqsave(&pci_lock, flags);
+
+	/* This indicates a problem in the caller, but we don't need
+	 * to kill them, unlike a double-block above. */
+	WARN_ON(!dev->block_ucfg_access);
+
 	dev->block_ucfg_access = 0;
+	wake_up_all(&pci_ucfg_wait);
 	spin_unlock_irqrestore(&pci_lock, flags);
 }
 EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access);
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index 59c5b242d86..ddbadd95387 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -62,10 +62,10 @@ struct acpiphp_slot;
 struct slot {
 	struct hotplug_slot	*hotplug_slot;
 	struct acpiphp_slot	*acpi_slot;
+	struct hotplug_slot_info info;
+	char name[SLOT_NAME_SIZE];
 };
 
-
-
 /**
  * struct acpiphp_bridge - PCI bridge information
  *
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index c57d9d5ce84..40c79b03c7e 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -303,25 +303,15 @@ static int __init init_acpi(void)
 	/* read initial number of slots */
 	if (!retval) {
 		num_slots = acpiphp_get_num_slots();
-		if (num_slots == 0)
+		if (num_slots == 0) {
+			acpiphp_glue_exit();
 			retval = -ENODEV;
+		}
 	}
 
 	return retval;
 }
 
-
-/**
- * make_slot_name - make a slot name that appears in pcihpfs
- * @slot: slot to name
- *
- */
-static void make_slot_name(struct slot *slot)
-{
-	snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%u",
-		 slot->acpi_slot->sun);
-}
-
 /**
  * release_slot - free up the memory used by a slot
  * @hotplug_slot: slot to free
@@ -332,8 +322,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
 
 	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
 
-	kfree(slot->hotplug_slot->info);
-	kfree(slot->hotplug_slot->name);
 	kfree(slot->hotplug_slot);
 	kfree(slot);
 }
@@ -342,26 +330,19 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
 int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
 {
 	struct slot *slot;
-	struct hotplug_slot *hotplug_slot;
-	struct hotplug_slot_info *hotplug_slot_info;
 	int retval = -ENOMEM;
 
 	slot = kzalloc(sizeof(*slot), GFP_KERNEL);
 	if (!slot)
 		goto error;
 
-	slot->hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL);
+	slot->hotplug_slot = kzalloc(sizeof(*slot->hotplug_slot), GFP_KERNEL);
 	if (!slot->hotplug_slot)
 		goto error_slot;
 
-	slot->hotplug_slot->info = kzalloc(sizeof(*hotplug_slot_info),
-					   GFP_KERNEL);
-	if (!slot->hotplug_slot->info)
-		goto error_hpslot;
+	slot->hotplug_slot->info = &slot->info;
 
-	slot->hotplug_slot->name = kzalloc(SLOT_NAME_SIZE, GFP_KERNEL);
-	if (!slot->hotplug_slot->name)
-		goto error_info;
+	slot->hotplug_slot->name = slot->name;
 
 	slot->hotplug_slot->private = slot;
 	slot->hotplug_slot->release = &release_slot;
@@ -376,21 +357,17 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
 	slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
 
 	acpiphp_slot->slot = slot;
-	make_slot_name(slot);
+	snprintf(slot->name, sizeof(slot->name), "%u", slot->acpi_slot->sun);
 
 	retval = pci_hp_register(slot->hotplug_slot);
 	if (retval) {
 		err("pci_hp_register failed with error %d\n", retval);
-		goto error_name;
+		goto error_hpslot;
  	}
 
 	info("Slot [%s] registered\n", slot->hotplug_slot->name);
 
 	return 0;
-error_name:
-	kfree(slot->hotplug_slot->name);
-error_info:
-	kfree(slot->hotplug_slot->info);
 error_hpslot:
 	kfree(slot->hotplug_slot);
 error_slot:
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 16167b01626..0b9d0db1590 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -1693,14 +1693,10 @@ void __exit acpiphp_glue_exit(void)
  */
 int __init acpiphp_get_num_slots(void)
 {
-	struct list_head *node;
 	struct acpiphp_bridge *bridge;
-	int num_slots;
-
-	num_slots = 0;
+	int num_slots = 0;
 
-	list_for_each (node, &bridge_list) {
-		bridge = (struct acpiphp_bridge *)node;
+	list_for_each_entry (bridge, &bridge_list, list) {
 		dbg("Bus %04x:%02x has %d slot%s\n",
 				pci_domain_nr(bridge->pci_bus),
 				bridge->pci_bus->number, bridge->nr_slots,
diff --git a/drivers/pci/hotplug/ibmphp_pci.c b/drivers/pci/hotplug/ibmphp_pci.c
index d87a9e3eaee..d8f05d7a3c7 100644
--- a/drivers/pci/hotplug/ibmphp_pci.c
+++ b/drivers/pci/hotplug/ibmphp_pci.c
@@ -1371,12 +1371,12 @@ static int unconfigure_boot_bridge (u8 busno, u8 device, u8 function)
 	}
 
 	bus = ibmphp_find_res_bus (sec_number);
-	debug ("bus->busno is %x\n", bus->busno);
-	debug ("sec_number is %x\n", sec_number);
 	if (!bus) {
 		err ("cannot find Bus structure for the bridged device\n");
 		return -EINVAL;
 	}
+	debug("bus->busno is %x\n", bus->busno);
+	debug("sec_number is %x\n", sec_number);
 
 	ibmphp_remove_bus (bus, busno);
 
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index f93e81e2d2c..f13f31323e8 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -521,14 +521,9 @@ static void __exit unload_pciehpd(void)
 
 }
 
-static int hpdriver_context = 0;
-
 static void pciehp_remove (struct pcie_device *device)
 {
-	printk("%s ENTRY\n", __FUNCTION__);	
-	printk("%s -> Call free_irq for irq = %d\n",  
-		__FUNCTION__, device->irq);
-	free_irq(device->irq, &hpdriver_context);
+	/* XXX - Needs to be adapted to device driver model */
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 1c551c697c3..6d3f580f266 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -718,8 +718,6 @@ static void hpc_release_ctlr(struct controller *ctrl)
 		if (php_ctlr->irq) {
 			free_irq(php_ctlr->irq, ctrl);
 			php_ctlr->irq = 0;
-			if (!pcie_mch_quirk) 
-				pci_disable_msi(php_ctlr->pci_dev);
 		}
 	}
 	if (php_ctlr->pci_dev) 
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index 46825fee3ae..72383467a0d 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -63,7 +63,7 @@ static struct device_node *find_php_slot_pci_node(char *drc_name,
 	char *type;
 	int rc;
 
-	while ((np = of_find_node_by_type(np, "pci"))) {
+	while ((np = of_find_node_by_name(np, "pci"))) {
 		rc = rpaphp_get_drc_props(np, NULL, &name, &type, NULL);
 		if (rc == 0)
 			if (!strcmp(drc_name, name) && !strcmp(drc_type, type))
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 141486df235..71a2cb8baa4 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -356,7 +356,7 @@ static int __init rpaphp_init(void)
 	info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
 	init_MUTEX(&rpaphp_sem);
 
-	while ((dn = of_find_node_by_type(dn, "pci")))
+	while ((dn = of_find_node_by_name(dn, "pci")))
 		rpaphp_add_slot(dn);
 
 	return 0;
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index b62ad31a973..5d188c55838 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -205,21 +205,6 @@ static struct hotplug_slot * sn_hp_destroy(void)
 	return bss_hotplug_slot;
 }
 
-static void sn_bus_alloc_data(struct pci_dev *dev)
-{
-	struct pci_bus *subordinate_bus;
-	struct pci_dev *child;
-
-	sn_pci_fixup_slot(dev);
-
-	/* Recursively sets up the sn_irq_info structs */
-	if (dev->subordinate) {
-		subordinate_bus = dev->subordinate;
-		list_for_each_entry(child, &subordinate_bus->devices, bus_list)
-			sn_bus_alloc_data(child);
-	}
-}
-
 static void sn_bus_free_data(struct pci_dev *dev)
 {
 	struct pci_bus *subordinate_bus;
@@ -337,6 +322,11 @@ static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot,
 	return rc;
 }
 
+/*
+ * Power up and configure the slot via a SAL call to PROM.
+ * Scan slot (and any children), do any platform specific fixup,
+ * and find device driver.
+ */
 static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
 {
 	struct slot *slot = bss_hotplug_slot->private;
@@ -345,6 +335,7 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
 	int func, num_funcs;
 	int new_ppb = 0;
 	int rc;
+	void pcibios_fixup_device_resources(struct pci_dev *);
 
 	/* Serialize the Linux PCI infrastructure */
 	mutex_lock(&sn_hotplug_mutex);
@@ -367,9 +358,6 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
 		return -ENODEV;
 	}
 
-	sn_pci_controller_fixup(pci_domain_nr(slot->pci_bus),
-				slot->pci_bus->number,
-				slot->pci_bus);
 	/*
 	 * Map SN resources for all functions on the card
 	 * to the Linux PCI interface and tell the drivers
@@ -380,6 +368,13 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
 				   PCI_DEVFN(slot->device_num + 1,
 					     PCI_FUNC(func)));
 		if (dev) {
+			/* Need to do slot fixup on PPB before fixup of children
+			 * (PPB's pcidev_info needs to be in pcidev_info list
+			 * before child's SN_PCIDEV_INFO() call to setup
+			 * pdi_host_pcidev_info).
+			 */
+			pcibios_fixup_device_resources(dev);
+			sn_pci_fixup_slot(dev);
 			if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 				unsigned char sec_bus;
 				pci_read_config_byte(dev, PCI_SECONDARY_BUS,
@@ -387,12 +382,8 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
 				new_bus = pci_add_new_bus(dev->bus, dev,
 							  sec_bus);
 				pci_scan_child_bus(new_bus);
-				sn_pci_controller_fixup(pci_domain_nr(new_bus),
-							new_bus->number,
-							new_bus);
 				new_ppb = 1;
 			}
-			sn_bus_alloc_data(dev);
 			pci_dev_put(dev);
 		}
 	}
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index f0cca1772f9..3898f523714 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -6,14 +6,6 @@
 #ifndef MSI_H
 #define MSI_H
 
-/*
- * MSI-X Address Register
- */
-#define PCI_MSIX_FLAGS_QSIZE		0x7FF
-#define PCI_MSIX_FLAGS_ENABLE		(1 << 15)
-#define PCI_MSIX_FLAGS_BIRMASK		(7 << 0)
-#define PCI_MSIX_FLAGS_BITMASK		(1 << 0)
-
 #define PCI_MSIX_ENTRY_SIZE			16
 #define  PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET	0
 #define  PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET	4
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index bb7456c1dba..a064f36a080 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -36,6 +36,7 @@ acpi_query_osc (
 	struct acpi_buffer	output = {ACPI_ALLOCATE_BUFFER, NULL};
 	union acpi_object 	*out_obj;
 	u32			osc_dw0;
+	acpi_status *ret_status = (acpi_status *)retval;
 
 	
 	/* Setting up input parameters */
@@ -56,6 +57,7 @@ acpi_query_osc (
 	if (ACPI_FAILURE (status)) {
 		printk(KERN_DEBUG  
 			"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
+		*ret_status = status;
 		return status;
 	}
 	out_obj = output.pointer;
@@ -90,6 +92,7 @@ acpi_query_osc (
 
 query_osc_out:
 	kfree(output.pointer);
+	*ret_status = status;
 	return status;
 }
 
@@ -166,6 +169,7 @@ run_osc_out:
 acpi_status pci_osc_support_set(u32 flags)
 {
 	u32 temp;
+	acpi_status retval;
 
 	if (!(flags & OSC_SUPPORT_MASKS)) {
 		return AE_TYPE;
@@ -179,9 +183,13 @@ acpi_status pci_osc_support_set(u32 flags)
 	acpi_get_devices ( PCI_ROOT_HID_STRING,
 			acpi_query_osc,
 			ctrlset_buf,
-			NULL );
+			(void **) &retval );
 	ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE;
 	ctrlset_buf[OSC_CONTROL_TYPE] = temp;
+	if (ACPI_FAILURE(retval)) {
+		/* no osc support at all */
+		ctrlset_buf[OSC_SUPPORT_TYPE] = 0;
+	}
 	return AE_OK;
 }
 EXPORT_SYMBOL(pci_osc_support_set);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 194f1d21d3d..e5ae3a0c13b 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -329,8 +329,8 @@ static int pci_default_resume(struct pci_dev *pci_dev)
 	/* restore the PCI config space */
 	pci_restore_state(pci_dev);
 	/* if the device was enabled before suspend, reenable */
-	if (pci_dev->is_enabled)
-		retval = pci_enable_device(pci_dev);
+	if (atomic_read(&pci_dev->enable_cnt))
+		retval = __pci_enable_device(pci_dev);
 	/* if the device was busmaster before the suspend, make it busmaster again */
 	if (pci_dev->is_busmaster)
 		pci_set_master(pci_dev);
@@ -445,9 +445,12 @@ int __pci_register_driver(struct pci_driver *drv, struct module *owner)
 
 	/* register with core */
 	error = driver_register(&drv->driver);
+	if (error)
+		return error;
 
-	if (!error)
-		error = pci_create_newid_file(drv);
+	error = pci_create_newid_file(drv);
+	if (error)
+		driver_unregister(&drv->driver);
 
 	return error;
 }
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index f952bfea48a..7a94076752d 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -42,7 +42,6 @@ pci_config_attr(subsystem_vendor, "0x%04x\n");
 pci_config_attr(subsystem_device, "0x%04x\n");
 pci_config_attr(class, "0x%06x\n");
 pci_config_attr(irq, "%u\n");
-pci_config_attr(is_enabled, "%u\n");
 
 static ssize_t broken_parity_status_show(struct device *dev,
 					 struct device_attribute *attr,
@@ -112,26 +111,36 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
 		       (u8)(pci_dev->class >> 16), (u8)(pci_dev->class >> 8),
 		       (u8)(pci_dev->class));
 }
-static ssize_t
-is_enabled_store(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
+
+static ssize_t is_enabled_store(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t count)
 {
+	ssize_t result = -EINVAL;
 	struct pci_dev *pdev = to_pci_dev(dev);
-	int retval = 0;
 
 	/* this can crash the machine when done on the "wrong" device */
 	if (!capable(CAP_SYS_ADMIN))
 		return count;
 
-	if (*buf == '0')
-		pci_disable_device(pdev);
+	if (*buf == '0') {
+		if (atomic_read(&pdev->enable_cnt) != 0)
+			pci_disable_device(pdev);
+		else
+			result = -EIO;
+	} else if (*buf == '1')
+		result = pci_enable_device(pdev);
+
+	return result < 0 ? result : count;
+}
 
-	if (*buf == '1')
-		retval = pci_enable_device(pdev);
+static ssize_t is_enabled_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct pci_dev *pdev;
 
-	if (retval)
-		return retval;
-	return count;
+	pdev = to_pci_dev (dev);
+	return sprintf (buf, "%u\n", atomic_read(&pdev->enable_cnt));
 }
 
 static ssize_t
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index a544997399b..5a14b73cf3a 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -490,6 +490,47 @@ static void pci_restore_pcie_state(struct pci_dev *dev)
 	kfree(save_state);
 }
 
+
+static int pci_save_pcix_state(struct pci_dev *dev)
+{
+	int pos, i = 0;
+	struct pci_cap_saved_state *save_state;
+	u16 *cap;
+
+	pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+	if (pos <= 0)
+		return 0;
+
+	save_state = kzalloc(sizeof(*save_state) + sizeof(u16), GFP_KERNEL);
+	if (!save_state) {
+		dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
+		return -ENOMEM;
+	}
+	cap = (u16 *)&save_state->data[0];
+
+	pci_read_config_word(dev, pos + PCI_X_CMD, &cap[i++]);
+	pci_add_saved_cap(dev, save_state);
+	return 0;
+}
+
+static void pci_restore_pcix_state(struct pci_dev *dev)
+{
+	int i = 0, pos;
+	struct pci_cap_saved_state *save_state;
+	u16 *cap;
+
+	save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
+	pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+	if (!save_state || pos <= 0)
+		return;
+	cap = (u16 *)&save_state->data[0];
+
+	pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
+	pci_remove_saved_cap(save_state);
+	kfree(save_state);
+}
+
+
 /**
  * pci_save_state - save the PCI configuration space of a device before suspending
  * @dev: - PCI device that we're dealing with
@@ -507,6 +548,8 @@ pci_save_state(struct pci_dev *dev)
 		return i;
 	if ((i = pci_save_pcie_state(dev)) != 0)
 		return i;
+	if ((i = pci_save_pcix_state(dev)) != 0)
+		return i;
 	return 0;
 }
 
@@ -538,6 +581,7 @@ pci_restore_state(struct pci_dev *dev)
 				dev->saved_config_space[i]);
 		}
 	}
+	pci_restore_pcix_state(dev);
 	pci_restore_msi_state(dev);
 	pci_restore_msix_state(dev);
 	return 0;
@@ -568,30 +612,51 @@ pci_enable_device_bars(struct pci_dev *dev, int bars)
 }
 
 /**
- * pci_enable_device - Initialize device before it's used by a driver.
+ * __pci_enable_device - Initialize device before it's used by a driver.
  * @dev: PCI device to be initialized
  *
  *  Initialize device before it's used by a driver. Ask low-level code
  *  to enable I/O and memory. Wake up the device if it was suspended.
  *  Beware, this function can fail.
+ *
+ * Note this function is a backend and is not supposed to be called by
+ * normal code, use pci_enable_device() instead.
  */
 int
-pci_enable_device(struct pci_dev *dev)
+__pci_enable_device(struct pci_dev *dev)
 {
 	int err;
 
-	if (dev->is_enabled)
-		return 0;
-
 	err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1);
 	if (err)
 		return err;
 	pci_fixup_device(pci_fixup_enable, dev);
-	dev->is_enabled = 1;
 	return 0;
 }
 
 /**
+ * pci_enable_device - Initialize device before it's used by a driver.
+ * @dev: PCI device to be initialized
+ *
+ *  Initialize device before it's used by a driver. Ask low-level code
+ *  to enable I/O and memory. Wake up the device if it was suspended.
+ *  Beware, this function can fail.
+ *
+ *  Note we don't actually enable the device many times if we call
+ *  this function repeatedly (we just increment the count).
+ */
+int pci_enable_device(struct pci_dev *dev)
+{
+	int result;
+	if (atomic_add_return(1, &dev->enable_cnt) > 1)
+		return 0;		/* already enabled */
+	result = __pci_enable_device(dev);
+	if (result < 0)
+		atomic_dec(&dev->enable_cnt);
+	return result;
+}
+
+/**
  * pcibios_disable_device - disable arch specific PCI resources for device dev
  * @dev: the PCI device to disable
  *
@@ -607,12 +672,18 @@ void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {}
  *
  * Signal to the system that the PCI device is not in use by the system
  * anymore.  This only involves disabling PCI bus-mastering, if active.
+ *
+ * Note we don't actually disable the device until all callers of
+ * pci_device_enable() have called pci_device_disable().
  */
 void
 pci_disable_device(struct pci_dev *dev)
 {
 	u16 pci_command;
 
+	if (atomic_sub_return(1, &dev->enable_cnt) != 0)
+		return;
+
 	if (dev->msi_enabled)
 		disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
 			PCI_CAP_ID_MSI);
@@ -628,7 +699,6 @@ pci_disable_device(struct pci_dev *dev)
 	dev->is_busmaster = 0;
 
 	pcibios_disable_device(dev);
-	dev->is_enabled = 0;
 }
 
 /**
@@ -831,22 +901,38 @@ pci_set_master(struct pci_dev *dev)
 	pcibios_set_master(dev);
 }
 
-#ifndef HAVE_ARCH_PCI_MWI
+#ifdef PCI_DISABLE_MWI
+int pci_set_mwi(struct pci_dev *dev)
+{
+	return 0;
+}
+
+void pci_clear_mwi(struct pci_dev *dev)
+{
+}
+
+#else
+
+#ifndef PCI_CACHE_LINE_BYTES
+#define PCI_CACHE_LINE_BYTES L1_CACHE_BYTES
+#endif
+
 /* This can be overridden by arch code. */
-u8 pci_cache_line_size = L1_CACHE_BYTES >> 2;
+/* Don't forget this is measured in 32-bit words, not bytes */
+u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4;
 
 /**
- * pci_generic_prep_mwi - helper function for pci_set_mwi
- * @dev: the PCI device for which MWI is enabled
+ * pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed
+ * @dev: the PCI device for which MWI is to be enabled
  *
- * Helper function for generic implementation of pcibios_prep_mwi
- * function.  Originally copied from drivers/net/acenic.c.
+ * Helper function for pci_set_mwi.
+ * Originally copied from drivers/net/acenic.c.
  * Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>.
  *
  * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
  */
 static int
-pci_generic_prep_mwi(struct pci_dev *dev)
+pci_set_cacheline_size(struct pci_dev *dev)
 {
 	u8 cacheline_size;
 
@@ -872,7 +958,6 @@ pci_generic_prep_mwi(struct pci_dev *dev)
 
 	return -EINVAL;
 }
-#endif /* !HAVE_ARCH_PCI_MWI */
 
 /**
  * pci_set_mwi - enables memory-write-invalidate PCI transaction
@@ -890,12 +975,7 @@ pci_set_mwi(struct pci_dev *dev)
 	int rc;
 	u16 cmd;
 
-#ifdef HAVE_ARCH_PCI_MWI
-	rc = pcibios_prep_mwi(dev);
-#else
-	rc = pci_generic_prep_mwi(dev);
-#endif
-
+	rc = pci_set_cacheline_size(dev);
 	if (rc)
 		return rc;
 
@@ -926,6 +1006,7 @@ pci_clear_mwi(struct pci_dev *dev)
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
 	}
 }
+#endif /* ! PCI_DISABLE_MWI */
 
 /**
  * pci_intx - enables/disables PCI INTx for device dev
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 6bf327db5c5..398852f526a 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -1,5 +1,6 @@
 /* Functions internal to the PCI core code */
 
+extern int __must_check __pci_enable_device(struct pci_dev *);
 extern int pci_uevent(struct device *dev, char **envp, int num_envp,
 		      char *buffer, int buffer_size);
 extern int pci_create_sysfs_dev_files(struct pci_dev *pdev);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e159d660449..0eeac60042b 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -679,6 +679,33 @@ static int pci_setup_device(struct pci_dev * dev)
 		pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
 		pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
 		pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
+
+		/*
+		 *	Do the ugly legacy mode stuff here rather than broken chip
+		 *	quirk code. Legacy mode ATA controllers have fixed
+		 *	addresses. These are not always echoed in BAR0-3, and
+		 *	BAR0-3 in a few cases contain junk!
+		 */
+		if (class == PCI_CLASS_STORAGE_IDE) {
+			u8 progif;
+			pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
+			if ((progif & 1) == 0) {
+				dev->resource[0].start = 0x1F0;
+				dev->resource[0].end = 0x1F7;
+				dev->resource[0].flags = IORESOURCE_IO;
+				dev->resource[1].start = 0x3F6;
+				dev->resource[1].end = 0x3F6;
+				dev->resource[1].flags = IORESOURCE_IO;
+			}
+			if ((progif & 4) == 0) {
+				dev->resource[2].start = 0x170;
+				dev->resource[2].end = 0x177;
+				dev->resource[2].flags = IORESOURCE_IO;
+				dev->resource[3].start = 0x376;
+				dev->resource[3].end = 0x376;
+				dev->resource[3].flags = IORESOURCE_IO;
+			}
+		}
 		break;
 
 	case PCI_HEADER_TYPE_BRIDGE:		    /* bridge header */
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 5b448381169..9ca9b9bf616 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -797,56 +797,6 @@ static void __init quirk_mediagx_master(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX,	PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
 
 /*
- * As per PCI spec, ignore base address registers 0-3 of the IDE controllers
- * running in Compatible mode (bits 0 and 2 in the ProgIf for primary and
- * secondary channels respectively). If the device reports Compatible mode
- * but does use BAR0-3 for address decoding, we assume that firmware has
- * programmed these BARs with standard values (0x1f0,0x3f4 and 0x170,0x374).
- * Exceptions (if they exist) must be handled in chip/architecture specific
- * fixups.
- *
- * Note: for non x86 people. You may need an arch specific quirk to handle
- * moving IDE devices to native mode as well. Some plug in card devices power
- * up in compatible mode and assume the BIOS will adjust them.
- *
- * Q: should we load the 0x1f0,0x3f4 into the registers or zap them as
- * we do now ? We don't want is pci_enable_device to come along
- * and assign new resources. Both approaches work for that.
- */ 
-static void __devinit quirk_ide_bases(struct pci_dev *dev)
-{
-       struct resource *res;
-       int first_bar = 2, last_bar = 0;
-
-       if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
-               return;
-
-       res = &dev->resource[0];
-
-       /* primary channel: ProgIf bit 0, BAR0, BAR1 */
-       if (!(dev->class & 1) && (res[0].flags || res[1].flags)) { 
-               res[0].start = res[0].end = res[0].flags = 0;
-               res[1].start = res[1].end = res[1].flags = 0;
-               first_bar = 0;
-               last_bar = 1;
-       }
-
-       /* secondary channel: ProgIf bit 2, BAR2, BAR3 */
-       if (!(dev->class & 4) && (res[2].flags || res[3].flags)) { 
-               res[2].start = res[2].end = res[2].flags = 0;
-               res[3].start = res[3].end = res[3].flags = 0;
-               last_bar = 3;
-       }
-
-       if (!last_bar)
-               return;
-
-       printk(KERN_INFO "PCI: Ignoring BAR%d-%d of IDE controller %s\n",
-              first_bar, last_bar, pci_name(dev));
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_ide_bases);
-
-/*
  *	Ensure C0 rev restreaming is off. This is normally done by
  *	the BIOS but in the odd case it is not the results are corruption
  *	hence the presence of a Linux check
@@ -880,11 +830,10 @@ static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev)
 		prog &= ~5;
 		pdev->class &= ~5;
 		pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
-		/* need to re-assign BARs for compat mode */
-		quirk_ide_bases(pdev);
+		/* PCI layer will sort out resources */
 	}
 }
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide );
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide );
 
 /*
  *	Intel 82801CAM ICH3-M datasheet says IDE modes must be the same
@@ -900,11 +849,9 @@ static void __init quirk_ide_samemode(struct pci_dev *pdev)
 		prog &= ~5;
 		pdev->class &= ~5;
 		pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
-		/* need to re-assign BARs for compat mode */
-		quirk_ide_bases(pdev);
 	}
 }
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
 
 /* This was originally an Alpha specific thing, but it really fits here.
  * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index e1dcefc69bb..d087e081771 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -81,7 +81,8 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
 		start = (loff_t)0xC0000;
 		*size = 0x20000; /* cover C000:0 through E000:0 */
 	} else {
-		if (res->flags & IORESOURCE_ROM_COPY) {
+		if (res->flags &
+			(IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY)) {
 			*size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
 			return (void __iomem *)(unsigned long)
 				pci_resource_start(pdev, PCI_ROM_RESOURCE);
@@ -165,7 +166,8 @@ void __iomem *pci_map_rom_copy(struct pci_dev *pdev, size_t *size)
 	if (!rom)
 		return NULL;
 
-	if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_SHADOW))
+	if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_SHADOW |
+			  IORESOURCE_ROM_BIOS_COPY))
 		return rom;
 
 	res->start = (unsigned long)kmalloc(*size, GFP_KERNEL);
@@ -191,7 +193,7 @@ void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom)
 {
 	struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
 
-	if (res->flags & IORESOURCE_ROM_COPY)
+	if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY))
 		return;
 
 	iounmap(rom);
@@ -215,6 +217,7 @@ void pci_remove_rom(struct pci_dev *pdev)
 		sysfs_remove_bin_file(&pdev->dev.kobj, pdev->rom_attr);
 	if (!(res->flags & (IORESOURCE_ROM_ENABLE |
 			    IORESOURCE_ROM_SHADOW |
+			    IORESOURCE_ROM_BIOS_COPY |
 			    IORESOURCE_ROM_COPY)))
 		pci_disable_rom(pdev);
 }