aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorDavid Brownell <dbrownell@users.sourceforge.net>2009-02-24 15:31:54 -0800
committerGreg Kroah-Hartman <gregkh@suse.de>2009-03-24 16:20:36 -0700
commita227fd7db74fa05d866790a4b29ba049bb5035cc (patch)
treed3f852d767e1c31394acd2c9bec811c0619df5dd /drivers
parent743821717c611913a5a3f95010b141f0b4cb5463 (diff)
USB: musb: partial DaVinci dm355 support
Partial support for DaVinci DM355, on the EVM board; peripheral mode should work, once mainline merges DM355 support. Missing: (a) renumbering the GPIO for DRVVBUS on the DM6446 EVM, when DAVINCI_N_GPIO increases; (b) disabling DM355_DEEPSLEEP.DRVVBUS_OVERRIDE so VBUS is driven according to the ID signal, if cpu_is_..._dm355() The new PHY control bits are ignored on DM6446. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/musb/Kconfig6
-rw-r--r--drivers/usb/musb/davinci.c63
-rw-r--r--drivers/usb/musb/davinci.h23
3 files changed, 62 insertions, 30 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 9985db08e7d..b66e8544d8b 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -20,8 +20,8 @@ config USB_MUSB_HDRC
it's being used with, including the USB peripheral role,
or the USB host role, or both.
- Texas Instruments parts using this IP include DaVinci 644x,
- OMAP 243x, OMAP 343x, and TUSB 6010.
+ Texas Instruments familiies using this IP include DaVinci
+ (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
Analog Devices parts using this IP include Blackfin BF54x,
BF525 and BF527.
@@ -40,7 +40,7 @@ config USB_MUSB_SOC
default y if (BF54x && !BF544)
default y if (BF52x && !BF522 && !BF523)
-comment "DaVinci 644x USB support"
+comment "DaVinci 35x and 644x USB support"
depends on USB_MUSB_HDRC && ARCH_DAVINCI
comment "OMAP 243x high speed USB support"
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 2dc7606f319..10d11ab113a 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -48,6 +48,9 @@
#include "cppi_dma.h"
+#define USB_PHY_CTRL IO_ADDRESS(USBPHY_CTL_PADDR)
+#define DM355_DEEPSLEEP IO_ADDRESS(DM355_DEEPSLEEP_PADDR)
+
/* REVISIT (PM) we should be able to keep the PHY in low power mode most
* of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
* and, when in host mode, autosuspending idle root ports... PHYPLLON
@@ -56,20 +59,26 @@
static inline void phy_on(void)
{
- /* start the on-chip PHY and its PLL */
- __raw_writel(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON,
- (void __force __iomem *) IO_ADDRESS(USBPHY_CTL_PADDR));
- while ((__raw_readl((void __force __iomem *)
- IO_ADDRESS(USBPHY_CTL_PADDR))
- & USBPHY_PHYCLKGD) == 0)
+ u32 phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+ /* power everything up; start the on-chip PHY and its PLL */
+ phy_ctrl &= ~(USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN);
+ phy_ctrl |= USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON;
+ __raw_writel(phy_ctrl, USB_PHY_CTRL);
+
+ /* wait for PLL to lock before proceeding */
+ while ((__raw_readl(USB_PHY_CTRL) & USBPHY_PHYCLKGD) == 0)
cpu_relax();
}
static inline void phy_off(void)
{
- /* powerdown the on-chip PHY and its oscillator */
- __raw_writel(USBPHY_OSCPDWN | USBPHY_PHYPDWN, (void __force __iomem *)
- IO_ADDRESS(USBPHY_CTL_PADDR));
+ u32 phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+ /* powerdown the on-chip PHY, its PLL, and the OTG block */
+ phy_ctrl &= ~(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON);
+ phy_ctrl |= USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN;
+ __raw_writel(phy_ctrl, USB_PHY_CTRL);
}
static int dma_off = 1;
@@ -126,10 +135,6 @@ void musb_platform_disable(struct musb *musb)
}
-/* REVISIT it's not clear whether DaVinci can support full OTG. */
-
-static int vbus_state = -1;
-
#ifdef CONFIG_USB_MUSB_HDRC_HCD
#define portstate(stmt) stmt
#else
@@ -137,10 +142,19 @@ static int vbus_state = -1;
#endif
-/* VBUS SWITCHING IS BOARD-SPECIFIC */
+/*
+ * VBUS SWITCHING IS BOARD-SPECIFIC ... at least for the DM6446 EVM,
+ * which doesn't wire DRVVBUS to the FET that switches it. Unclear
+ * if that's a problem with the DM6446 chip or just with that board.
+ *
+ * In either case, the DM355 EVM automates DRVVBUS the normal way,
+ * when J10 is out, and TI documents it as handling OTG.
+ */
#ifdef CONFIG_MACH_DAVINCI_EVM
+static int vbus_state = -1;
+
/* I2C operations are always synchronous, and require a task context.
* With unloaded systems, using the shared workqueue seems to suffice
* to satisfy the 100msec A_WAIT_VRISE timeout...
@@ -150,12 +164,12 @@ static void evm_deferred_drvvbus(struct work_struct *ignored)
gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state);
vbus_state = !vbus_state;
}
-static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
#endif /* EVM */
static void davinci_source_power(struct musb *musb, int is_on, int immediate)
{
+#ifdef CONFIG_MACH_DAVINCI_EVM
if (is_on)
is_on = 1;
@@ -163,16 +177,17 @@ static void davinci_source_power(struct musb *musb, int is_on, int immediate)
return;
vbus_state = !is_on; /* 0/1 vs "-1 == unknown/init" */
-#ifdef CONFIG_MACH_DAVINCI_EVM
if (machine_is_davinci_evm()) {
+ static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
+
if (immediate)
gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state);
else
schedule_work(&evm_vbus_work);
}
-#endif
if (immediate)
vbus_state = is_on;
+#endif
}
static void davinci_set_vbus(struct musb *musb, int is_on)
@@ -391,6 +406,17 @@ int __init musb_platform_init(struct musb *musb)
musb->board_set_vbus = davinci_set_vbus;
davinci_source_power(musb, 0, 1);
+ /* dm355 EVM swaps D+/D- for signal integrity, and
+ * is clocked from the main 24 MHz crystal.
+ */
+ if (machine_is_davinci_dm355_evm()) {
+ u32 phy_ctrl = __raw_readl(USB_PHY_CTRL);
+
+ phy_ctrl &= ~(3 << 9);
+ phy_ctrl |= USBPHY_DATAPOL;
+ __raw_writel(phy_ctrl, USB_PHY_CTRL);
+ }
+
/* reset the controller */
musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
@@ -401,8 +427,7 @@ int __init musb_platform_init(struct musb *musb)
/* NOTE: irqs are in mixed mode, not bypass to pure-musb */
pr_debug("DaVinci OTG revision %08x phy %03x control %02x\n",
- revision, __raw_readl((void __force __iomem *)
- IO_ADDRESS(USBPHY_CTL_PADDR)),
+ revision, __raw_readl(USB_PHY_CTRL),
musb_readb(tibase, DAVINCI_USB_CTRL_REG));
musb->isr = davinci_interrupt;
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
index 7fb6238e270..046c84433ca 100644
--- a/drivers/usb/musb/davinci.h
+++ b/drivers/usb/musb/davinci.h
@@ -15,14 +15,21 @@
*/
/* Integrated highspeed/otg PHY */
-#define USBPHY_CTL_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x34)
-#define USBPHY_PHYCLKGD (1 << 8)
-#define USBPHY_SESNDEN (1 << 7) /* v(sess_end) comparator */
-#define USBPHY_VBDTCTEN (1 << 6) /* v(bus) comparator */
-#define USBPHY_PHYPLLON (1 << 4) /* override pll suspend */
-#define USBPHY_CLKO1SEL (1 << 3)
-#define USBPHY_OSCPDWN (1 << 2)
-#define USBPHY_PHYPDWN (1 << 0)
+#define USBPHY_CTL_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define USBPHY_DATAPOL BIT(11) /* (dm355) switch D+/D- */
+#define USBPHY_PHYCLKGD BIT(8)
+#define USBPHY_SESNDEN BIT(7) /* v(sess_end) comparator */
+#define USBPHY_VBDTCTEN BIT(6) /* v(bus) comparator */
+#define USBPHY_VBUSSENS BIT(5) /* (dm355,ro) is vbus > 0.5V */
+#define USBPHY_PHYPLLON BIT(4) /* override pll suspend */
+#define USBPHY_CLKO1SEL BIT(3)
+#define USBPHY_OSCPDWN BIT(2)
+#define USBPHY_OTGPDWN BIT(1)
+#define USBPHY_PHYPDWN BIT(0)
+
+#define DM355_DEEPSLEEP_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x48)
+#define DRVVBUS_FORCE BIT(2)
+#define DRVVBUS_OVERRIDE BIT(1)
/* For now include usb OTG module registers here */
#define DAVINCI_USB_VERSION_REG 0x00