aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorJiri Slaby <jirislaby@gmail.com>2008-07-23 13:17:35 +0200
committerJohn W. Linville <linville@tuxdriver.com>2008-08-22 16:29:49 -0400
commitd7dc100374df0c21afd8a198336ecd7999697159 (patch)
treefadb0ec2eccbd8c9c21d6f29af8fa10747ee56b8 /drivers
parentb9740c2396851178b99c03c2260a0adfe7f52e36 (diff)
Ath5k: unify resets
There were 3 code copy and pastes of reset. Unify the resets and place in separate function. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/wireless/ath5k/base.c124
1 files changed, 42 insertions, 82 deletions
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 8bc9b92ad6a..e8564095b2f 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -162,7 +162,8 @@ static struct pci_driver ath5k_pci_driver = {
* Prototypes - MAC 802.11 stack related functions
*/
static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
-static int ath5k_reset(struct ieee80211_hw *hw);
+static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel);
+static int ath5k_reset_wake(struct ath5k_softc *sc);
static int ath5k_start(struct ieee80211_hw *hw);
static void ath5k_stop(struct ieee80211_hw *hw);
static int ath5k_add_interface(struct ieee80211_hw *hw,
@@ -977,9 +978,6 @@ ath5k_getchannels(struct ieee80211_hw *hw)
static int
ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
{
- struct ath5k_hw *ah = sc->ah;
- int ret;
-
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n",
sc->curchan->center_freq, chan->center_freq);
@@ -995,41 +993,7 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
- ath5k_hw_set_intr(ah, 0); /* disable interrupts */
- ath5k_txq_cleanup(sc); /* clear pending tx frames */
- ath5k_rx_stop(sc); /* turn off frame recv */
- ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
- if (ret) {
- ATH5K_ERR(sc, "%s: unable to reset channel "
- "(%u Mhz)\n", __func__, chan->center_freq);
- return ret;
- }
-
- ath5k_hw_set_txpower_limit(sc->ah, 0);
-
- /*
- * Re-enable rx framework.
- */
- ret = ath5k_rx_start(sc);
- if (ret) {
- ATH5K_ERR(sc, "%s: unable to restart recv logic\n",
- __func__);
- return ret;
- }
-
- /*
- * Change channels and update the h/w rate map
- * if we're switching; e.g. 11a to 11b/g.
- *
- * XXX needed?
- */
-/* ath5k_chan_change(sc, chan); */
-
- ath5k_beacon_config(sc);
- /*
- * Re-enable interrupts.
- */
- ath5k_hw_set_intr(ah, sc->imask);
+ return ath5k_reset(sc, true, true);
}
return 0;
@@ -2217,36 +2181,13 @@ ath5k_init(struct ath5k_softc *sc)
*/
sc->curchan = sc->hw->conf.channel;
sc->curband = &sc->sbands[sc->curchan->band];
- ret = ath5k_hw_reset(sc->ah, sc->opmode, sc->curchan, false);
- if (ret) {
- ATH5K_ERR(sc, "unable to reset hardware: %d\n", ret);
- goto done;
- }
- /*
- * This is needed only to setup initial state
- * but it's best done after a reset.
- */
- ath5k_hw_set_txpower_limit(sc->ah, 0);
-
- /*
- * Setup the hardware after reset: the key cache
- * is filled as needed and the receive engine is
- * set going. Frame transmit is handled entirely
- * in the frame output path; there's nothing to do
- * here except setup the interrupt mask.
- */
- ret = ath5k_rx_start(sc);
- if (ret)
- goto done;
-
- /*
- * Enable interrupts.
- */
sc->imask = AR5K_INT_RX | AR5K_INT_TX | AR5K_INT_RXEOL |
AR5K_INT_RXORN | AR5K_INT_FATAL | AR5K_INT_GLOBAL |
AR5K_INT_MIB;
+ ret = ath5k_reset(sc, false, false);
+ if (ret)
+ goto done;
- ath5k_hw_set_intr(sc->ah, sc->imask);
/* Set ack to be sent at low bit-rates */
ath5k_hw_set_ack_bitrate_high(sc->ah, false);
@@ -2446,7 +2387,7 @@ ath5k_tasklet_reset(unsigned long data)
{
struct ath5k_softc *sc = (void *)data;
- ath5k_reset(sc->hw);
+ ath5k_reset_wake(sc);
}
/*
@@ -2469,7 +2410,7 @@ ath5k_calibrate(unsigned long data)
* to load new gain values.
*/
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
- ath5k_reset(sc->hw);
+ ath5k_reset_wake(sc);
}
if (ath5k_hw_phy_calibrate(ah, sc->curchan))
ATH5K_ERR(sc, "calibration of channel %u failed\n",
@@ -2670,48 +2611,67 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
}
static int
-ath5k_reset(struct ieee80211_hw *hw)
+ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
{
- struct ath5k_softc *sc = hw->priv;
struct ath5k_hw *ah = sc->ah;
int ret;
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
- ath5k_hw_set_intr(ah, 0);
- ath5k_txq_cleanup(sc);
- ath5k_rx_stop(sc);
-
+ if (stop) {
+ ath5k_hw_set_intr(ah, 0);
+ ath5k_txq_cleanup(sc);
+ ath5k_rx_stop(sc);
+ }
ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
- if (unlikely(ret)) {
+ if (ret) {
ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
goto err;
}
+
+ /*
+ * This is needed only to setup initial state
+ * but it's best done after a reset.
+ */
ath5k_hw_set_txpower_limit(sc->ah, 0);
ret = ath5k_rx_start(sc);
- if (unlikely(ret)) {
+ if (ret) {
ATH5K_ERR(sc, "can't start recv logic\n");
goto err;
}
+
/*
- * We may be doing a reset in response to an ioctl
- * that changes the channel so update any state that
- * might change as a result.
+ * Change channels and update the h/w rate map if we're switching;
+ * e.g. 11a to 11b/g.
+ *
+ * We may be doing a reset in response to an ioctl that changes the
+ * channel so update any state that might change as a result.
*
* XXX needed?
*/
/* ath5k_chan_change(sc, c); */
- ath5k_beacon_config(sc);
- /* intrs are started by ath5k_beacon_config */
- ieee80211_wake_queues(hw);
+ ath5k_beacon_config(sc);
+ /* intrs are enabled by ath5k_beacon_config */
return 0;
err:
return ret;
}
+static int
+ath5k_reset_wake(struct ath5k_softc *sc)
+{
+ int ret;
+
+ ret = ath5k_reset(sc, true, true);
+ if (!ret)
+ ieee80211_wake_queues(sc->hw);
+
+ return ret;
+}
+
static int ath5k_start(struct ieee80211_hw *hw)
{
return ath5k_init(hw->priv);
@@ -2820,7 +2780,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
mutex_unlock(&sc->lock);
- return ath5k_reset(hw);
+ return ath5k_reset_wake(sc);
unlock:
mutex_unlock(&sc->lock);
return ret;