aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorMichael Chan <mchan@broadcom.com>2007-07-07 22:48:00 -0700
committerDavid S. Miller <davem@sunset.davemloft.net>2007-07-10 22:18:30 -0700
commitdeaf391b4cc9d9f8e2b2793ebd56da776b54197a (patch)
treef834c1aae99c9d97eea7393286d91e5c3e43b13a /drivers
parent5faf41535214b68c989a22302c8870f8758cbb8c (diff)
[BNX2]: Add bnx2_set_default_link().
Put existing code to setup the default link settings in this new function. This makes it easier to support the remote PHY feature in the next few patches. Also change ETHTOOL_ALL_FIBRE_SPEED to include 2500Mbps if supported. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/bnx2.c43
1 files changed, 25 insertions, 18 deletions
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 0f4f76fda26..56bc41ee9a4 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1323,7 +1323,9 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
}
#define ETHTOOL_ALL_FIBRE_SPEED \
- (ADVERTISED_1000baseT_Full)
+ (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) ? \
+ (ADVERTISED_2500baseX_Full | ADVERTISED_1000baseT_Full) :\
+ (ADVERTISED_1000baseT_Full)
#define ETHTOOL_ALL_COPPER_SPEED \
(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \
@@ -1335,6 +1337,27 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
#define PHY_ALL_1000_SPEED (ADVERTISE_1000HALF | ADVERTISE_1000FULL)
+static void
+bnx2_set_default_link(struct bnx2 *bp)
+{
+ bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL;
+ bp->req_line_speed = 0;
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ u32 reg;
+
+ bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg;
+
+ reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG);
+ reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK;
+ if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) {
+ bp->autoneg = 0;
+ bp->req_line_speed = bp->line_speed = SPEED_1000;
+ bp->req_duplex = DUPLEX_FULL;
+ }
+ } else
+ bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg;
+}
+
static int
bnx2_setup_copper_phy(struct bnx2 *bp)
{
@@ -6374,23 +6397,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
}
}
- bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL;
- bp->req_line_speed = 0;
- if (bp->phy_flags & PHY_SERDES_FLAG) {
- bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg;
-
- reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG);
- reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK;
- if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) {
- bp->autoneg = 0;
- bp->req_line_speed = bp->line_speed = SPEED_1000;
- bp->req_duplex = DUPLEX_FULL;
- }
- }
- else {
- bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg;
- }
-
+ bnx2_set_default_link(bp);
bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX;
init_timer(&bp->timer);