Merge ../linux-2.6

72 files changed, 1372 insertions, 2446 deletions

diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c
index d3a2bc36129..588fca542a9 100644
--- a/drivers/char/genrtc.c
+++ b/drivers/char/genrtc.c
@@ -200,13 +200,13 @@ static ssize_t gen_rtc_read(struct file *file, char __user *buf,
 	/* first test allows optimizer to nuke this case for 32-bit machines */
 	if (sizeof (int) != sizeof (long) && count == sizeof (unsigned int)) {
 		unsigned int uidata = data;
-		retval = put_user(uidata, (unsigned long __user *)buf);
+		retval = put_user(uidata, (unsigned int __user *)buf) ?:
+			sizeof(unsigned int);
 	}
 	else {
-		retval = put_user(data, (unsigned long __user *)buf);
+		retval = put_user(data, (unsigned long __user *)buf) ?:
+			sizeof(unsigned long);
 	}
-	if (!retval)
-		retval = sizeof(unsigned long);
  out:
 	current->state = TASK_RUNNING;
 	remove_wait_queue(&gen_rtc_wait, &wait);
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 935670a3cd9..5755b7e5f18 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -860,9 +860,32 @@ static void k_slock(struct vc_data *vc, unsigned char value, char up_flag, struc
 }
 
 /* by default, 300ms interval for combination release */
-static long brl_timeout = 300;
-MODULE_PARM_DESC(brl_timeout, "Braille keys release delay in ms (0 for combination on first release, < 0 for dead characters)");
-module_param(brl_timeout, long, 0644);
+static unsigned brl_timeout = 300;
+MODULE_PARM_DESC(brl_timeout, "Braille keys release delay in ms (0 for commit on first key release)");
+module_param(brl_timeout, uint, 0644);
+
+static unsigned brl_nbchords = 1;
+MODULE_PARM_DESC(brl_nbchords, "Number of chords that produce a braille pattern (0 for dead chords)");
+module_param(brl_nbchords, uint, 0644);
+
+static void k_brlcommit(struct vc_data *vc, unsigned int pattern, char up_flag, struct pt_regs *regs)
+{
+	static unsigned long chords;
+	static unsigned committed;
+
+	if (!brl_nbchords)
+		k_deadunicode(vc, BRL_UC_ROW | pattern, up_flag, regs);
+	else {
+		committed |= pattern;
+		chords++;
+		if (chords == brl_nbchords) {
+			k_unicode(vc, BRL_UC_ROW | committed, up_flag, regs);
+			chords = 0;
+			committed = 0;
+		}
+	}
+}
+
 static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct pt_regs *regs)
 {
 	static unsigned pressed,committing;
@@ -882,11 +905,6 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct
 	if (value > 8)
 		return;
 
-	if (brl_timeout < 0) {
-		k_deadunicode(vc, BRL_UC_ROW | (1 << (value - 1)), up_flag, regs);
-		return;
-	}
-
 	if (up_flag) {
 		if (brl_timeout) {
 			if (!committing ||
@@ -897,13 +915,13 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct
 			pressed &= ~(1 << (value - 1));
 			if (!pressed) {
 				if (committing) {
-					k_unicode(vc, BRL_UC_ROW | committing, 0, regs);
+					k_brlcommit(vc, committing, 0, regs);
 					committing = 0;
 				}
 			}
 		} else {
 			if (committing) {
-				k_unicode(vc, BRL_UC_ROW | committing, 0, regs);
+				k_brlcommit(vc, committing, 0, regs);
 				committing = 0;
 			}
 			pressed &= ~(1 << (value - 1));
diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c
index 8666171e187..d3ba2f860ef 100644
--- a/drivers/char/mwave/mwavedd.c
+++ b/drivers/char/mwave/mwavedd.c
@@ -271,7 +271,7 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				ipcnum,
 				pDrvData->IPCs[ipcnum].usIntCount);
 	
-			if (ipcnum > ARRAY_SIZE(pDrvData->IPCs)) {
+			if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
 				PRINTK_ERROR(KERN_ERR_MWAVE
 						"mwavedd::mwave_ioctl:"
 						" IOCTL_MW_REGISTER_IPC:"
diff --git a/drivers/char/tipar.c b/drivers/char/tipar.c
index eb2eb3e12d6..079db5a935a 100644
--- a/drivers/char/tipar.c
+++ b/drivers/char/tipar.c
@@ -515,7 +515,7 @@ tipar_init_module(void)
 		err = PTR_ERR(tipar_class);
 		goto out_chrdev;
 	}
-	if (parport_register_driver(&tipar_driver) || tp_count == 0) {
+	if (parport_register_driver(&tipar_driver)) {
 		printk(KERN_ERR "tipar: unable to register with parport\n");
 		err = -EIO;
 		goto out_class;
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index 66572c5323a..fce31936e6d 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -25,6 +25,8 @@
 #include <linux/slab.h>
 #include "edac_mc.h"
 
+static int force_function_unhide;
+
 #define e752x_printk(level, fmt, arg...) \
 	edac_printk(level, "e752x", fmt, ##arg)
 
@@ -782,8 +784,16 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
 	debugf0("%s(): mci\n", __func__);
 	debugf0("Starting Probe1\n");
 
-	/* enable device 0 function 1 */
+	/* check to see if device 0 function 1 is enabled; if it isn't, we
+	 * assume the BIOS has reserved it for a reason and is expecting
+	 * exclusive access, we take care not to violate that assumption and
+	 * fail the probe. */
 	pci_read_config_byte(pdev, E752X_DEVPRES1, &stat8);
+	if (!force_function_unhide && !(stat8 & (1 << 5))) {
+		printk(KERN_INFO "Contact your BIOS vendor to see if the "
+			"E752x error registers can be safely un-hidden\n");
+		goto fail;
+	}
 	stat8 |= (1 << 5);
 	pci_write_config_byte(pdev, E752X_DEVPRES1, stat8);
 
@@ -1063,3 +1073,8 @@ module_exit(e752x_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Linux Networx (http://lnxi.com) Tom Zimmerman\n");
 MODULE_DESCRIPTION("MC support for Intel e752x memory controllers");
+
+module_param(force_function_unhide, int, 0444);
+MODULE_PARM_DESC(force_function_unhide, "if BIOS sets Dev0:Fun1 up as hidden:"
+" 1=force unhide and hope BIOS doesn't fight driver for Dev0:Fun1 access");
+
diff --git a/drivers/infiniband/hw/ipath/ipath_debug.h b/drivers/infiniband/hw/ipath/ipath_debug.h
index 593e28969c6..46762387f5f 100644
--- a/drivers/infiniband/hw/ipath/ipath_debug.h
+++ b/drivers/infiniband/hw/ipath/ipath_debug.h
@@ -60,11 +60,11 @@
 #define __IPATH_KERNEL_SEND 0x2000	/* use kernel mode send */
 #define __IPATH_EPKTDBG     0x4000	/* print ethernet packet data */
 #define __IPATH_SMADBG      0x8000	/* sma packet debug */
-#define __IPATH_IPATHDBG    0x10000	/* Ethernet (IPATH) general debug on */
-#define __IPATH_IPATHWARN   0x20000	/* Ethernet (IPATH) warnings on */
-#define __IPATH_IPATHERR    0x40000	/* Ethernet (IPATH) errors on */
-#define __IPATH_IPATHPD     0x80000	/* Ethernet (IPATH) packet dump on */
-#define __IPATH_IPATHTABLE  0x100000	/* Ethernet (IPATH) table dump on */
+#define __IPATH_IPATHDBG    0x10000	/* Ethernet (IPATH) gen debug */
+#define __IPATH_IPATHWARN   0x20000	/* Ethernet (IPATH) warnings */
+#define __IPATH_IPATHERR    0x40000	/* Ethernet (IPATH) errors */
+#define __IPATH_IPATHPD     0x80000	/* Ethernet (IPATH) packet dump */
+#define __IPATH_IPATHTABLE  0x100000	/* Ethernet (IPATH) table dump */
 
 #else				/* _IPATH_DEBUGGING */
 
@@ -79,11 +79,12 @@
 #define __IPATH_TRSAMPLE  0x0	/* generate trace buffer sample entries */
 #define __IPATH_VERBDBG   0x0	/* very verbose debug */
 #define __IPATH_PKTDBG    0x0	/* print packet data */
-#define __IPATH_PROCDBG   0x0	/* print process startup (init)/exit messages */
+#define __IPATH_PROCDBG   0x0	/* process startup (init)/exit messages */
 /* print mmap/nopage stuff, not using VDBG any more */
 #define __IPATH_MMDBG     0x0
 #define __IPATH_EPKTDBG   0x0	/* print ethernet packet data */
-#define __IPATH_SMADBG    0x0   /* print process startup (init)/exit messages */#define __IPATH_IPATHDBG  0x0	/* Ethernet (IPATH) table dump on */
+#define __IPATH_SMADBG    0x0   /* process startup (init)/exit messages */
+#define __IPATH_IPATHDBG  0x0	/* Ethernet (IPATH) table dump on */
 #define __IPATH_IPATHWARN 0x0	/* Ethernet (IPATH) warnings on   */
 #define __IPATH_IPATHERR  0x0	/* Ethernet (IPATH) errors on   */
 #define __IPATH_IPATHPD   0x0	/* Ethernet (IPATH) packet dump on   */
diff --git a/drivers/infiniband/hw/ipath/ipath_diag.c b/drivers/infiniband/hw/ipath/ipath_diag.c
index 7d3fb6996b4..28ddceb260e 100644
--- a/drivers/infiniband/hw/ipath/ipath_diag.c
+++ b/drivers/infiniband/hw/ipath/ipath_diag.c
@@ -277,13 +277,14 @@ static int ipath_diag_open(struct inode *in, struct file *fp)
 
 bail:
 	spin_unlock_irqrestore(&ipath_devs_lock, flags);
-	mutex_unlock(&ipath_mutex);
 
 	/* Only expose a way to reset the device if we
 	   make it into diag mode. */
 	if (ret == 0)
 		ipath_expose_reset(&dd->pcidev->dev);
 
+	mutex_unlock(&ipath_mutex);
+
 	return ret;
 }
 
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index e7617c3982e..398add4d4cb 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -418,9 +418,19 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 
 	ret = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
 	if (ret) {
-		dev_info(&pdev->dev, "pci_set_dma_mask unit %u "
-			 "fails: %d\n", dd->ipath_unit, ret);
-		goto bail_regions;
+		/*
+		 * if the 64 bit setup fails, try 32 bit.  Some systems
+		 * do not setup 64 bit maps on systems with 2GB or less
+		 * memory installed.
+		 */
+		ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (ret) {
+			dev_info(&pdev->dev, "pci_set_dma_mask unit %u "
+				 "fails: %d\n", dd->ipath_unit, ret);
+			goto bail_regions;
+		}
+		else
+			ipath_dbg("No 64bit DMA mask, used 32 bit mask\n");
 	}
 
 	pci_set_master(pdev);
@@ -1949,7 +1959,7 @@ int ipath_reset_device(int unit)
 	}
 
 	if (dd->ipath_pd)
-		for (i = 1; i < dd->ipath_portcnt; i++) {
+		for (i = 1; i < dd->ipath_cfgports; i++) {
 			if (dd->ipath_pd[i] && dd->ipath_pd[i]->port_cnt) {
 				ipath_dbg("unit %u port %d is in use "
 					  "(PID %u cmd %s), can't reset\n",
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index 2823ff9c0c6..16f640e1c16 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -53,13 +53,19 @@ MODULE_PARM_DESC(cfgports, "Set max number of ports to use");
 
 /*
  * Number of buffers reserved for driver (layered drivers and SMA
- * send).  Reserved at end of buffer list.
+ * send).  Reserved at end of buffer list.   Initialized based on
+ * number of PIO buffers if not set via module interface.
+ * The problem with this is that it's global, but we'll use different
+ * numbers for different chip types.  So the default value is not
+ * very useful.  I've redefined it for the 1.3 release so that it's
+ * zero unless set by the user to something else, in which case we
+ * try to respect it.
  */
-static ushort ipath_kpiobufs = 32;
+static ushort ipath_kpiobufs;
 
 static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);
 
-module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_uint,
+module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
 		  &ipath_kpiobufs, S_IWUSR | S_IRUGO);
 MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");
 
@@ -531,8 +537,11 @@ static int init_housekeeping(struct ipath_devdata *dd,
 	 * Don't clear ipath_flags as 8bit mode was set before
 	 * entering this func. However, we do set the linkstate to
 	 * unknown, so we can watch for a transition.
+	 * PRESENT is set because we want register reads to work,
+	 * and the kernel infrastructure saw it in config space;
+	 * We clear it if we have failures.
 	 */
-	dd->ipath_flags |= IPATH_LINKUNK;
+	dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
 	dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
 			     IPATH_LINKDOWN | IPATH_LINKINIT);
 
@@ -560,6 +569,7 @@ static int init_housekeeping(struct ipath_devdata *dd,
 	    || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
 		ipath_dev_err(dd, "Register read failures from chip, "
 			      "giving up initialization\n");
+		dd->ipath_flags &= ~IPATH_PRESENT;
 		ret = -ENODEV;
 		goto done;
 	}
@@ -682,16 +692,14 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
 	 */
 	dd->ipath_pioavregs = ALIGN(val, sizeof(u64) * BITS_PER_BYTE / 2)
 		/ (sizeof(u64) * BITS_PER_BYTE / 2);
-	if (!ipath_kpiobufs)	/* have to have at least 1, for SMA */
-		kpiobufs = ipath_kpiobufs = 1;
-	else if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) <
-		 (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT)) {
-		dev_info(&dd->pcidev->dev, "Too few PIO buffers (%u) "
-			 "for %u ports to have %u each!\n",
-			 dd->ipath_piobcnt2k + dd->ipath_piobcnt4k,
-			 dd->ipath_cfgports, IPATH_MIN_USER_PORT_BUFCNT);
-		kpiobufs = 1;	/* reserve just the minimum for SMA/ether */
-	} else
+	if (ipath_kpiobufs == 0) {
+		/* not set by user, or set explictly to default  */
+		if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) > 128)
+			kpiobufs = 32;
+		else
+			kpiobufs = 16;
+	}
+	else
 		kpiobufs = ipath_kpiobufs;
 
 	if (kpiobufs >
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 0bcb428041f..3e72a1fe3d7 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -665,14 +665,14 @@ static void handle_layer_pioavail(struct ipath_devdata *dd)
 
 	ret = __ipath_layer_intr(dd, IPATH_LAYER_INT_SEND_CONTINUE);
 	if (ret > 0)
-		goto clear;
+		goto set;
 
 	ret = __ipath_verbs_piobufavail(dd);
 	if (ret > 0)
-		goto clear;
+		goto set;
 
 	return;
-clear:
+set:
 	set_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl);
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 			 dd->ipath_sendctrl);
@@ -719,11 +719,24 @@ static void handle_rcv(struct ipath_devdata *dd, u32 istat)
 irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
 {
 	struct ipath_devdata *dd = data;
-	u32 istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
+	u32 istat;
 	ipath_err_t estat = 0;
 	static unsigned unexpected = 0;
 	irqreturn_t ret;
 
+	if(!(dd->ipath_flags & IPATH_PRESENT)) {
+		/* this is mostly so we don't try to touch the chip while
+		 * it is being reset */
+		/*
+		 * This return value is perhaps odd, but we do not want the
+		 * interrupt core code to remove our interrupt handler
+		 * because we don't appear to be handling an interrupt
+		 * during a chip reset.
+		 */
+		return IRQ_HANDLED;
+	}
+
+	istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
 	if (unlikely(!istat)) {
 		ipath_stats.sps_nullintr++;
 		ret = IRQ_NONE; /* not our interrupt, or already handled */
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 0ce5f19c9d6..e6507f8115b 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -731,7 +731,7 @@ u64 ipath_read_kreg64_port(const struct ipath_devdata *, ipath_kreg,
 static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd,
 				    ipath_ureg regno, int port)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return 0;
 
 	return readl(regno + (u64 __iomem *)
@@ -762,7 +762,7 @@ static inline void ipath_write_ureg(const struct ipath_devdata *dd,
 static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
 				    ipath_kreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return -1;
 	return readl((u32 __iomem *) & dd->ipath_kregbase[regno]);
 }
@@ -770,7 +770,7 @@ static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
 static inline u64 ipath_read_kreg64(const struct ipath_devdata *dd,
 				    ipath_kreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return -1;
 
 	return readq(&dd->ipath_kregbase[regno]);
@@ -786,7 +786,7 @@ static inline void ipath_write_kreg(const struct ipath_devdata *dd,
 static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
 				  ipath_sreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return 0;
 
 	return readq(regno + (u64 __iomem *)
@@ -797,7 +797,7 @@ static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
 static inline u32 ipath_read_creg32(const struct ipath_devdata *dd,
 					 ipath_sreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return 0;
 	return readl(regno + (u64 __iomem *)
 		     (dd->ipath_cregbase +
diff --git a/drivers/infiniband/hw/ipath/ipath_layer.c b/drivers/infiniband/hw/ipath/ipath_layer.c
index 69ed1100701..9cb5258ffed 100644
--- a/drivers/infiniband/hw/ipath/ipath_layer.c
+++ b/drivers/infiniband/hw/ipath/ipath_layer.c
@@ -46,13 +46,15 @@
 /* Acquire before ipath_devs_lock. */
 static DEFINE_MUTEX(ipath_layer_mutex);
 
+static int ipath_verbs_registered;
+
 u16 ipath_layer_rcv_opcode;
+
 static int (*layer_intr)(void *, u32);
 static int (*layer_rcv)(void *, void *, struct sk_buff *);
 static int (*layer_rcv_lid)(void *, void *);
 static int (*verbs_piobufavail)(void *);
 static void (*verbs_rcv)(void *, void *, void *, u32);
-static int ipath_verbs_registered;
 
 static void *(*layer_add_one)(int, struct ipath_devdata *);
 static void (*layer_remove_one)(void *);
@@ -586,6 +588,8 @@ void ipath_verbs_unregister(void)
 	verbs_rcv = NULL;
 	verbs_timer_cb = NULL;
 
+	ipath_verbs_registered = 0;
+
 	mutex_unlock(&ipath_layer_mutex);
 }
 
diff --git a/drivers/infiniband/hw/ipath/ipath_pe800.c b/drivers/infiniband/hw/ipath/ipath_pe800.c
index e1dc4f75706..6318067ab5e 100644
--- a/drivers/infiniband/hw/ipath/ipath_pe800.c
+++ b/drivers/infiniband/hw/ipath/ipath_pe800.c
@@ -972,6 +972,8 @@ static int ipath_setup_pe_reset(struct ipath_devdata *dd)
 	/* Use ERROR so it shows up in logs, etc. */
 	ipath_dev_err(dd, "Resetting PE-800 unit %u\n",
 		      dd->ipath_unit);
+	/* keep chip from being accessed in a few places */
+	dd->ipath_flags &= ~(IPATH_INITTED|IPATH_PRESENT);
 	val = dd->ipath_control | INFINIPATH_C_RESET;
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_control, val);
 	mb();
@@ -997,6 +999,8 @@ static int ipath_setup_pe_reset(struct ipath_devdata *dd)
 		if ((r = pci_enable_device(dd->pcidev)))
 			ipath_dev_err(dd, "pci_enable_device failed after "
 				      "reset: %d\n", r);
+		/* whether it worked or not, mark as present, again */
+		dd->ipath_flags |= IPATH_PRESENT;
 		val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
 		if (val == dd->ipath_revision) {
 			ipath_cdbg(VERBOSE, "Got matching revision "
diff --git a/drivers/infiniband/hw/ipath/ipath_registers.h b/drivers/infiniband/hw/ipath/ipath_registers.h
index 1e59750c5f6..402126eb79c 100644
--- a/drivers/infiniband/hw/ipath/ipath_registers.h
+++ b/drivers/infiniband/hw/ipath/ipath_registers.h
@@ -34,8 +34,9 @@
 #define _IPATH_REGISTERS_H
 
 /*
- * This file should only be included by kernel source, and by the diags.
- * It defines the registers, and their contents, for the InfiniPath HT-400 chip
+ * This file should only be included by kernel source, and by the diags.  It
+ * defines the registers, and their contents, for the InfiniPath HT-400
+ * chip.
  */
 
 /*
@@ -156,8 +157,10 @@
 #define INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT 8
 #define INFINIPATH_IBCC_LINKINITCMD_MASK 0x3ULL
 #define INFINIPATH_IBCC_LINKINITCMD_DISABLE 1
-#define INFINIPATH_IBCC_LINKINITCMD_POLL 2	/* cycle through TS1/TS2 till OK */
-#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3	/* wait for TS1, then go on */
+/* cycle through TS1/TS2 till OK */
+#define INFINIPATH_IBCC_LINKINITCMD_POLL 2
+/* wait for TS1, then go on */
+#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3
 #define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16
 #define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL
 #define INFINIPATH_IBCC_LINKCMD_INIT 1	/* move to 0x11 */
@@ -182,7 +185,8 @@
 #define INFINIPATH_IBCS_LINKSTATE_SHIFT 4
 #define INFINIPATH_IBCS_TXREADY       0x40000000
 #define INFINIPATH_IBCS_TXCREDITOK    0x80000000
-/* link training states (shift by INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
+/* link training states (shift by
+   INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
 #define INFINIPATH_IBCS_LT_STATE_DISABLED	0x00
 #define INFINIPATH_IBCS_LT_STATE_LINKUP		0x01
 #define INFINIPATH_IBCS_LT_STATE_POLLACTIVE	0x02
@@ -267,10 +271,12 @@
 /* kr_serdesconfig0 bits */
 #define INFINIPATH_SERDC0_RESET_MASK  0xfULL	/* overal reset bits */
 #define INFINIPATH_SERDC0_RESET_PLL   0x10000000ULL	/* pll reset */
-#define INFINIPATH_SERDC0_TXIDLE      0xF000ULL	/* tx idle enables (per lane) */
-#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL	/* rx detect enables (per lane) */
-#define INFINIPATH_SERDC0_L1PWR_DN	 0xF0ULL	/* L1 Power down; use with RXDETECT,
-							   Otherwise not used on IB side */
+/* tx idle enables (per lane) */
+#define INFINIPATH_SERDC0_TXIDLE      0xF000ULL
+/* rx detect enables (per lane) */
+#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL
+/* L1 Power down; use with RXDETECT, Otherwise not used on IB side */
+#define INFINIPATH_SERDC0_L1PWR_DN	 0xF0ULL
 
 /* kr_xgxsconfig bits */
 #define INFINIPATH_XGXS_RESET          0x7ULL
@@ -390,12 +396,13 @@ struct ipath_kregs {
 	ipath_kreg kr_txintmemsize;
 	ipath_kreg kr_xgxsconfig;
 	ipath_kreg kr_ibpllcfg;
-	/* use these two (and the following N ports) only with ipath_k*_kreg64_port();
-	 * not *kreg64() */
+	/* use these two (and the following N ports) only with
+	 * ipath_k*_kreg64_port(); not *kreg64() */
 	ipath_kreg kr_rcvhdraddr;
 	ipath_kreg kr_rcvhdrtailaddr;
 
-	/* remaining registers are not present on all types of infinipath chips  */
+	/* remaining registers are not present on all types of infinipath
+	   chips  */
 	ipath_kreg kr_rcvpktledcnt;
 	ipath_kreg kr_pcierbuftestreg0;
 	ipath_kreg kr_pcierbuftestreg1;
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index f232e77b78e..eb81424b3c5 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -531,19 +531,12 @@ int ipath_post_rc_send(struct ipath_qp *qp, struct ib_send_wr *wr)
 	}
 	wqe->wr.num_sge = j;
 	qp->s_head = next;
-	/*
-	 * Wake up the send tasklet if the QP is not waiting
-	 * for an RNR timeout.
-	 */
-	next = qp->s_rnr_timeout;
 	spin_unlock_irqrestore(&qp->s_lock, flags);
 
-	if (next == 0) {
-		if (qp->ibqp.qp_type == IB_QPT_UC)
-			ipath_do_uc_send((unsigned long) qp);
-		else
-			ipath_do_rc_send((unsigned long) qp);
-	}
+	if (qp->ibqp.qp_type == IB_QPT_UC)
+		ipath_do_uc_send((unsigned long) qp);
+	else
+		ipath_do_rc_send((unsigned long) qp);
 
 	ret = 0;
 
diff --git a/drivers/infiniband/hw/ipath/ipath_sysfs.c b/drivers/infiniband/hw/ipath/ipath_sysfs.c
index 32acd8048b4..f323791cc49 100644
--- a/drivers/infiniband/hw/ipath/ipath_sysfs.c
+++ b/drivers/infiniband/hw/ipath/ipath_sysfs.c
@@ -711,10 +711,22 @@ static struct attribute_group dev_attr_group = {
  * enters diag mode.  A device reset is quite likely to crash the
  * machine entirely, so we don't want to normally make it
  * available.
+ *
+ * Called with ipath_mutex held.
  */
 int ipath_expose_reset(struct device *dev)
 {
-	return device_create_file(dev, &dev_attr_reset);
+	static int exposed;
+	int ret;
+
+	if (!exposed) {
+		ret = device_create_file(dev, &dev_attr_reset);
+		exposed = 1;
+	}
+	else
+		ret = 0;
+
+	return ret;
 }
 
 int ipath_driver_create_group(struct device_driver *drv)
diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c
index 01cfb30ee16..e606daf8321 100644
--- a/drivers/infiniband/hw/ipath/ipath_ud.c
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c
@@ -46,8 +46,10 @@
  * This is called from ipath_post_ud_send() to forward a WQE addressed
  * to the same HCA.
  */
-static void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_sge_state *ss,
-			      u32 length, struct ib_send_wr *wr, struct ib_wc *wc)
+static void ipath_ud_loopback(struct ipath_qp *sqp,
+			      struct ipath_sge_state *ss,
+			      u32 length, struct ib_send_wr *wr,
+			      struct ib_wc *wc)
 {
 	struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
 	struct ipath_qp *qp;
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index 8d2558a01f3..cb9e387c301 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -449,7 +449,6 @@ static void ipath_ib_timer(void *arg)
 {
 	struct ipath_ibdev *dev = (struct ipath_ibdev *) arg;
 	struct ipath_qp *resend = NULL;
-	struct ipath_qp *rnr = NULL;
 	struct list_head *last;
 	struct ipath_qp *qp;
 	unsigned long flags;
@@ -465,32 +464,18 @@ static void ipath_ib_timer(void *arg)
 	last = &dev->pending[dev->pending_index];
 	while (!list_empty(last)) {
 		qp = list_entry(last->next, struct ipath_qp, timerwait);
-		if (last->next == LIST_POISON1 ||
-		    last->next != &qp->timerwait ||
-		    qp->timerwait.prev != last) {
-			INIT_LIST_HEAD(last);
-		} else {
-			list_del(&qp->timerwait);
-			qp->timerwait.prev = (struct list_head *) resend;
-			resend = qp;
-			atomic_inc(&qp->refcount);
-		}
+		list_del(&qp->timerwait);
+		qp->timer_next = resend;
+		resend = qp;
+		atomic_inc(&qp->refcount);
 	}
 	last = &dev->rnrwait;
 	if (!list_empty(last)) {
 		qp = list_entry(last->next, struct ipath_qp, timerwait);
 		if (--qp->s_rnr_timeout == 0) {
 			do {
-				if (last->next == LIST_POISON1 ||
-				    last->next != &qp->timerwait ||
-				    qp->timerwait.prev != last) {
-					INIT_LIST_HEAD(last);
-					break;
-				}
 				list_del(&qp->timerwait);
-				qp->timerwait.prev =
-					(struct list_head *) rnr;
-				rnr = qp;
+				tasklet_hi_schedule(&qp->s_task);
 				if (list_empty(last))
 					break;
 				qp = list_entry(last->next, struct ipath_qp,
@@ -530,8 +515,7 @@ static void ipath_ib_timer(void *arg)
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 
 	/* XXX What if timer fires again while this is running? */
-	for (qp = resend; qp != NULL;
-	     qp = (struct ipath_qp *) qp->timerwait.prev) {
+	for (qp = resend; qp != NULL; qp = qp->timer_next) {
 		struct ib_wc wc;
 
 		spin_lock_irqsave(&qp->s_lock, flags);
@@ -545,9 +529,6 @@ static void ipath_ib_timer(void *arg)
 		if (atomic_dec_and_test(&qp->refcount))
 			wake_up(&qp->wait);
 	}
-	for (qp = rnr; qp != NULL;
-	     qp = (struct ipath_qp *) qp->timerwait.prev)
-		tasklet_hi_schedule(&qp->s_task);
 }
 
 /**
@@ -556,9 +537,9 @@ static void ipath_ib_timer(void *arg)
  *
  * This is called from ipath_intr() at interrupt level when a PIO buffer is
  * available after ipath_verbs_send() returned an error that no buffers were
- * available.  Return 0 if we consumed all the PIO buffers and we still have
+ * available.  Return 1 if we consumed all the PIO buffers and we still have
  * QPs waiting for buffers (for now, just do a tasklet_hi_schedule and
- * return one).
+ * return zero).
  */
 static int ipath_ib_piobufavail(void *arg)
 {
@@ -579,7 +560,7 @@ static int ipath_ib_piobufavail(void *arg)
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 
 bail:
-	return 1;
+	return 0;
 }
 
 static int ipath_query_device(struct ib_device *ibdev,
@@ -1159,7 +1140,7 @@ static ssize_t show_stats(struct class_device *cdev, char *buf)
 
 	len = sprintf(buf,
 		      "RC resends  %d\n"
-		      "RC QACKs    %d\n"
+		      "RC no QACK  %d\n"
 		      "RC ACKs     %d\n"
 		      "RC SEQ NAKs %d\n"
 		      "RC RDMA seq %d\n"
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.h b/drivers/infiniband/hw/ipath/ipath_verbs.h
index fcafbc7c9e7..4f8d59300e9 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.h
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.h
@@ -282,7 +282,8 @@ struct ipath_srq {
  */
 struct ipath_qp {
 	struct ib_qp ibqp;
-	struct ipath_qp *next;	/* link list for QPN hash table */
+	struct ipath_qp *next;		/* link list for QPN hash table */
+	struct ipath_qp *timer_next;	/* link list for ipath_ib_timer() */
 	struct list_head piowait;	/* link for wait PIO buf */
 	struct list_head timerwait;	/* link for waiting for timeouts */
 	struct ib_ah_attr remote_ah_attr;
diff --git a/drivers/infiniband/hw/ipath/ips_common.h b/drivers/infiniband/hw/ipath/ips_common.h
index 410a764dfce..ab7cbbbfd03 100644
--- a/drivers/infiniband/hw/ipath/ips_common.h
+++ b/drivers/infiniband/hw/ipath/ips_common.h
@@ -95,7 +95,7 @@ struct ether_header {
 	__u8 seq_num;
 	__le32 len;
 	/* MUST be of word size due to PIO write requirements */
-	__u32 csum;
+	__le32 csum;
 	__le16 csum_offset;
 	__le16 flags;
 	__u16 first_2_bytes;
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c
index 565a24b1756..a2eae8a3016 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.c
+++ b/drivers/infiniband/hw/mthca/mthca_provider.c
@@ -306,7 +306,7 @@ static int mthca_query_gid(struct ib_device *ibdev, u8 port,
 		goto out;
 	}
 
-	memcpy(gid->raw + 8, out_mad->data + (index % 8) * 16, 8);
+	memcpy(gid->raw + 8, out_mad->data + (index % 8) * 8, 8);
 
  out:
 	kfree(in_mad);
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index a34e3d91d9e..ba325f16d07 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -403,6 +403,27 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd,
 		case EVIOCGID:
 			if (copy_to_user(p, &dev->id, sizeof(struct input_id)))
 				return -EFAULT;
+			return 0;
+
+		case EVIOCGREP:
+			if (!test_bit(EV_REP, dev->evbit))
+				return -ENOSYS;
+			if (put_user(dev->rep[REP_DELAY], ip))
+				return -EFAULT;
+			if (put_user(dev->rep[REP_PERIOD], ip + 1))
+				return -EFAULT;
+			return 0;
+
+		case EVIOCSREP:
+			if (!test_bit(EV_REP, dev->evbit))
+				return -ENOSYS;
+			if (get_user(u, ip))
+				return -EFAULT;
+			if (get_user(v, ip + 1))
+				return -EFAULT;
+
+			input_event(dev, EV_REP, REP_DELAY, u);
+			input_event(dev, EV_REP, REP_PERIOD, v);
 
 			return 0;
 
diff --git a/drivers/input/input.c b/drivers/input/input.c
index a935abeffff..3038c268917 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -155,6 +155,9 @@ void input_event(struct input_dev *dev, unsigned int type, unsigned int code, in
 			if (code > SND_MAX || !test_bit(code, dev->sndbit))
 				return;
 
+			if (!!test_bit(code, dev->snd) != !!value)
+				change_bit(code, dev->snd);
+
 			if (dev->event) dev->event(dev, type, code, value);
 
 			break;
@@ -286,19 +289,19 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st
 	for (; id->flags || id->driver_info; id++) {
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
-			if (id->id.bustype != dev->id.bustype)
+			if (id->bustype != dev->id.bustype)
 				continue;
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
-			if (id->id.vendor != dev->id.vendor)
+			if (id->vendor != dev->id.vendor)
 				continue;
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
-			if (id->id.product != dev->id.product)
+			if (id->product != dev->id.product)
 				continue;
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
-			if (id->id.version != dev->id.version)
+			if (id->version != dev->id.version)
 				continue;
 
 		MATCH_BIT(evbit,  EV_MAX);
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index bc61cf8cfc6..1d238a9d52d 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -53,8 +53,8 @@ static unsigned char spitzkbd_keycode[NR_SCANCODES] = {
 	KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0,  /* 1-16 */
 	0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */
 	KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0,                                 /* 33-48 */
-	SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,         /* 49-64 */
-	SPITZ_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0,	  /* 65-80 */
+	SPITZ_KEY_ADDRESS, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,         /* 49-64 */
+	SPITZ_KEY_CALENDER, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0,	  /* 65-80 */
 	SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0,      /* 81-96 */
 	KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0  /* 97-112 */
 };
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 4b415d9b012..36cd2e07fce 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -273,6 +273,18 @@ static struct key_entry keymap_fs_amilo_pro_v2000[] = {
 	{ KE_END,  0 }
 };
 
+static struct key_entry keymap_fujitsu_n3510[] = {
+	{ KE_KEY, 0x11, KEY_PROG1 },
+	{ KE_KEY, 0x12, KEY_PROG2 },
+	{ KE_KEY, 0x36, KEY_WWW },
+	{ KE_KEY, 0x31, KEY_MAIL },
+	{ KE_KEY, 0x71, KEY_STOPCD },
+	{ KE_KEY, 0x72, KEY_PLAYPAUSE },
+	{ KE_KEY, 0x74, KEY_REWIND },
+	{ KE_KEY, 0x78, KEY_FORWARD },
+	{ KE_END, 0 }
+};
+
 static struct key_entry keymap_wistron_ms2141[] = {
 	{ KE_KEY,  0x11, KEY_PROG1 },
 	{ KE_KEY,  0x12, KEY_PROG2 },
@@ -323,6 +335,24 @@ static struct dmi_system_id dmi_ids[] = {
 	},
 	{
 		.callback = dmi_matched,
+		.ident = "Fujitsu-Siemens Amilo M7400",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO M        "),
+		},
+		.driver_data = keymap_fs_amilo_pro_v2000
+	},
+	{
+		.callback = dmi_matched,
+		.ident = "Fujitsu N3510",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "N3510"),
+		},
+		.driver_data = keymap_fujitsu_n3510
+	},
+	{
+		.callback = dmi_matched,
 		.ident = "Acer Aspire 1500",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 32d70ed8f41..136321a2cfd 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -302,8 +302,10 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
  * Check if this is a new device announcement (0xAA 0x00)
  */
 	if (unlikely(psmouse->packet[0] == PSMOUSE_RET_BAT && psmouse->pktcnt <= 2)) {
-		if (psmouse->pktcnt == 1)
+		if (psmouse->pktcnt == 1) {
+			psmouse->last = jiffies;
 			goto out;
+		}
 
 		if (psmouse->packet[1] == PSMOUSE_RET_ID) {
 			__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 46d1fec2cfd..1494175ac6f 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -2,6 +2,8 @@
  * ADS7846 based touchscreen and sensor driver
  *
  * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * Various changes: Imre Deak <imre.deak@nokia.com>
  *
  * Using code from:
  *  - corgi_ts.c
@@ -34,17 +36,25 @@
 
 
 /*
- * This code has been lightly tested on an ads7846.
+ * This code has been tested on an ads7846 / N770 device.
  * Support for ads7843 and ads7845 has only been stubbed in.
  *
- * Not yet done:  investigate the values reported.  Are x/y/pressure
- * event values sane enough for X11?  How accurate are the temperature
- * and voltage readings?  (System-specific calibration should support
+ * Not yet done:  How accurate are the temperature and voltage
+ * readings? (System-specific calibration should support
  * accuracy of 0.3 degrees C; otherwise it's 2.0 degrees.)
  *
+ * IRQ handling needs a workaround because of a shortcoming in handling
+ * edge triggered IRQs on some platforms like the OMAP1/2. These
+ * platforms don't handle the ARM lazy IRQ disabling properly, thus we
+ * have to maintain our own SW IRQ disabled status. This should be
+ * removed as soon as the affected platform's IRQ handling is fixed.
+ *
  * app note sbaa036 talks in more detail about accurate sampling...
  * that ought to help in situations like LCDs inducing noise (which
  * can also be helped by using synch signals) and more generally.
+ * This driver tries to utilize the measures described in the app
+ * note. The strength of filtering can be set in the board-* specific
+ * files.
  */
 
 #define	TS_POLL_PERIOD	msecs_to_jiffies(10)
@@ -61,6 +71,7 @@ struct ts_event {
 	__be16 x;
 	__be16 y;
 	__be16 z1, z2;
+	int    ignore;
 };
 
 struct ads7846 {
@@ -71,12 +82,23 @@ struct ads7846 {
 	u16			model;
 	u16			vref_delay_usecs;
 	u16			x_plate_ohms;
+	u16			pressure_max;
 
-	u8			read_x, read_y, read_z1, read_z2;
+	u8			read_x, read_y, read_z1, read_z2, pwrdown;
+	u16			dummy;		/* for the pwrdown read */
 	struct ts_event		tc;
 
-	struct spi_transfer	xfer[8];
-	struct spi_message	msg;
+	struct spi_transfer	xfer[10];
+	struct spi_message	msg[5];
+	struct spi_message	*last_msg;
+	int			msg_idx;
+	int			read_cnt;
+	int			read_rep;
+	int			last_read;
+
+	u16			debounce_max;
+	u16			debounce_tol;
+	u16			debounce_rep;
 
 	spinlock_t		lock;
 	struct timer_list	timer;		/* P: lock */
@@ -84,6 +106,9 @@ struct ads7846 {
 	unsigned		pending:1;	/* P: lock */
 // FIXME remove "irq_disabled"
 	unsigned		irq_disabled:1;	/* P: lock */
+	unsigned		disabled:1;
+
+	int			(*get_pendown_state)(void);
 };
 
 /* leave chip selected when we're done, for quicker re-select? */
@@ -125,7 +150,9 @@ struct ads7846 {
 #define	READ_Y	(READ_12BIT_DFR(y)  | ADS_PD10_ADC_ON)
 #define	READ_Z1	(READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON)
 #define	READ_Z2	(READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON)
-#define	READ_X	(READ_12BIT_DFR(x)  | ADS_PD10_PDOWN)	/* LAST */
+
+#define	READ_X	(READ_12BIT_DFR(x)  | ADS_PD10_ADC_ON)
+#define	PWRDOWN	(READ_12BIT_DFR(y)  | ADS_PD10_PDOWN)	/* LAST */
 
 /* single-ended samples need to first power up reference voltage;
  * we leave both ADC and VREF powered
@@ -152,6 +179,15 @@ struct ser_req {
 	struct spi_transfer	xfer[6];
 };
 
+static void ads7846_enable(struct ads7846 *ts);
+static void ads7846_disable(struct ads7846 *ts);
+
+static int device_suspended(struct device *dev)
+{
+	struct ads7846 *ts = dev_get_drvdata(dev);
+	return dev->power.power_state.event != PM_EVENT_ON || ts->disabled;
+}
+
 static int ads7846_read12_ser(struct device *dev, unsigned command)
 {
 	struct spi_device	*spi = to_spi_device(dev);
@@ -164,7 +200,7 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	if (!req)
 		return -ENOMEM;
 
-	INIT_LIST_HEAD(&req->msg.transfers);
+	spi_message_init(&req->msg);
 
 	/* activate reference, so it has time to settle; */
 	req->ref_on = REF_ON;
@@ -204,8 +240,10 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	for (i = 0; i < 6; i++)
 		spi_message_add_tail(&req->xfer[i], &req->msg);
 
+	ts->irq_disabled = 1;
 	disable_irq(spi->irq);
 	status = spi_sync(spi, &req->msg);
+	ts->irq_disabled = 0;
 	enable_irq(spi->irq);
 
 	if (req->msg.status)
@@ -233,6 +271,52 @@ SHOW(temp1)
 SHOW(vaux)
 SHOW(vbatt)
 
+static int is_pen_down(struct device *dev)
+{
+	struct ads7846		*ts = dev_get_drvdata(dev);
+
+	return ts->pendown;
+}
+
+static ssize_t ads7846_pen_down_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%u\n", is_pen_down(dev));
+}
+
+static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL);
+
+static ssize_t ads7846_disable_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct ads7846	*ts = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t ads7846_disable_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct ads7846 *ts = dev_get_drvdata(dev);
+	char *endp;
+	int i;
+
+	i = simple_strtoul(buf, &endp, 10);
+	spin_lock_irq(&ts->lock);
+
+	if (i)
+		ads7846_disable(ts);
+	else
+		ads7846_enable(ts);
+
+	spin_unlock_irq(&ts->lock);
+
+	return count;
+}
+
+static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
+
 /*--------------------------------------------------------------------------*/
 
 /*
@@ -264,7 +348,7 @@ static void ads7846_rx(void *ads)
 	if (x == MAX_12BIT)
 		x = 0;
 
-	if (x && z1 && ts->spi->dev.power.power_state.event == PM_EVENT_ON) {
+	if (likely(x && z1 && !device_suspended(&ts->spi->dev))) {
 		/* compute touch pressure resistance using equation #2 */
 		Rt = z2;
 		Rt -= z1;
@@ -275,6 +359,14 @@ static void ads7846_rx(void *ads)
 	} else
 		Rt = 0;
 
+	/* Sample found inconsistent by debouncing or pressure is beyond
+	* the maximum. Don't report it to user space, repeat at least
+	* once more the measurement */
+	if (ts->tc.ignore || Rt > ts->pressure_max) {
+		mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
+		return;
+	}
+
 	/* NOTE:  "pendown" is inferred from pressure; we don't rely on
 	 * being able to check nPENIRQ status, or "friendly" trigger modes
 	 * (both-edges is much better than just-falling or low-level).
@@ -296,11 +388,13 @@ static void ads7846_rx(void *ads)
 	if (Rt) {
 		input_report_abs(input_dev, ABS_X, x);
 		input_report_abs(input_dev, ABS_Y, y);
-		input_report_abs(input_dev, ABS_PRESSURE, Rt);
 		sync = 1;
 	}
-	if (sync)
+
+	if (sync) {
+		input_report_abs(input_dev, ABS_PRESSURE, Rt);
 		input_sync(input_dev);
+	}
 
 #ifdef	VERBOSE
 	if (Rt || ts->pendown)
@@ -308,80 +402,138 @@ static void ads7846_rx(void *ads)
 			x, y, Rt, Rt ? "" : " UP");
 #endif
 
-	/* don't retrigger while we're suspended */
 	spin_lock_irqsave(&ts->lock, flags);
 
 	ts->pendown = (Rt != 0);
-	ts->pending = 0;
+	mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
 
-	if (ts->spi->dev.power.power_state.event == PM_EVENT_ON) {
-		if (ts->pendown)
-			mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
-		else if (ts->irq_disabled) {
-			ts->irq_disabled = 0;
-			enable_irq(ts->spi->irq);
+	spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+static void ads7846_debounce(void *ads)
+{
+	struct ads7846		*ts = ads;
+	struct spi_message	*m;
+	struct spi_transfer	*t;
+	int			val;
+	int			status;
+
+	m = &ts->msg[ts->msg_idx];
+	t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
+	val = (*(u16 *)t->rx_buf) >> 3;
+	if (!ts->read_cnt || (abs(ts->last_read - val) > ts->debounce_tol)) {
+		/* Repeat it, if this was the first read or the read
+		 * wasn't consistent enough. */
+		if (ts->read_cnt < ts->debounce_max) {
+			ts->last_read = val;
+			ts->read_cnt++;
+		} else {
+			/* Maximum number of debouncing reached and still
+			 * not enough number of consistent readings. Abort
+			 * the whole sample, repeat it in the next sampling
+			 * period.
+			 */
+			ts->tc.ignore = 1;
+			ts->read_cnt = 0;
+			/* Last message will contain ads7846_rx() as the
+			 * completion function.
+			 */
+			m = ts->last_msg;
 		}
+		/* Start over collecting consistent readings. */
+		ts->read_rep = 0;
+	} else {
+		if (++ts->read_rep > ts->debounce_rep) {
+			/* Got a good reading for this coordinate,
+			 * go for the next one. */
+			ts->tc.ignore = 0;
+			ts->msg_idx++;
+			ts->read_cnt = 0;
+			ts->read_rep = 0;
+			m++;
+		} else
+			/* Read more values that are consistent. */
+			ts->read_cnt++;
 	}
-
-	spin_unlock_irqrestore(&ts->lock, flags);
+	status = spi_async(ts->spi, m);
+	if (status)
+		dev_err(&ts->spi->dev, "spi_async --> %d\n",
+				status);
 }
 
 static void ads7846_timer(unsigned long handle)
 {
 	struct ads7846	*ts = (void *)handle;
 	int		status = 0;
-	unsigned long	flags;
+
+	spin_lock_irq(&ts->lock);
+
+	if (unlikely(ts->msg_idx && !ts->pendown)) {
+		/* measurment cycle ended */
+		if (!device_suspended(&ts->spi->dev)) {
+			ts->irq_disabled = 0;
+			enable_irq(ts->spi->irq);
+		}
+		ts->pending = 0;
+		ts->msg_idx = 0;
+	} else {
+		/* pen is still down, continue with the measurement */
+		ts->msg_idx = 0;
+		status = spi_async(ts->spi, &ts->msg[0]);
+		if (status)
+			dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
+	}
+
+	spin_unlock_irq(&ts->lock);
+}
+
+static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
+{
+	struct ads7846 *ts = handle;
+	unsigned long flags;
 
 	spin_lock_irqsave(&ts->lock, flags);
-	if (!ts->pending) {
-		ts->pending = 1;
+	if (likely(ts->get_pendown_state())) {
 		if (!ts->irq_disabled) {
+			/* REVISIT irq logic for many ARM chips has cloned a
+			 * bug wherein disabling an irq in its handler won't
+			 * work;(it's disabled lazily, and too late to work.
+			 * until all their irq logic is fixed, we must shadow
+			 * that state here.
+			 */
 			ts->irq_disabled = 1;
 			disable_irq(ts->spi->irq);
+			ts->pending = 1;
+			mod_timer(&ts->timer, jiffies);
 		}
-		status = spi_async(ts->spi, &ts->msg);
-		if (status)
-			dev_err(&ts->spi->dev, "spi_async --> %d\n",
-					status);
 	}
 	spin_unlock_irqrestore(&ts->lock, flags);
-}
 
-static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
-{
-	ads7846_timer((unsigned long) handle);
 	return IRQ_HANDLED;
 }
 
 /*--------------------------------------------------------------------------*/
 
-static int
-ads7846_suspend(struct spi_device *spi, pm_message_t message)
+/* Must be called with ts->lock held */
+static void ads7846_disable(struct ads7846 *ts)
 {
-	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
-	unsigned long	flags;
+	if (ts->disabled)
+		return;
 
-	spin_lock_irqsave(&ts->lock, flags);
-
-	spi->dev.power.power_state = message;
+	ts->disabled = 1;
 
 	/* are we waiting for IRQ, or polling? */
-	if (!ts->pendown) {
-		if (!ts->irq_disabled) {
-			ts->irq_disabled = 1;
-			disable_irq(ts->spi->irq);
-		}
+	if (!ts->pending) {
+		ts->irq_disabled = 1;
+		disable_irq(ts->spi->irq);
 	} else {
-		/* polling; force a final SPI completion;
-		 * that will clean things up neatly
+		/* the timer will run at least once more, and
+		 * leave everything in a clean state, IRQ disabled
 		 */
-		if (!ts->pending)
-			mod_timer(&ts->timer, jiffies);
-
-		while (ts->pendown || ts->pending) {
-			spin_unlock_irqrestore(&ts->lock, flags);
-			udelay(10);
-			spin_lock_irqsave(&ts->lock, flags);
+		while (ts->pending) {
+			spin_unlock_irq(&ts->lock);
+			msleep(1);
+			spin_lock_irq(&ts->lock);
 		}
 	}
 
@@ -389,17 +541,45 @@ ads7846_suspend(struct spi_device *spi, pm_message_t message)
 	 * leave it that way after every request
 	 */
 
-	spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+/* Must be called with ts->lock held */
+static void ads7846_enable(struct ads7846 *ts)
+{
+	if (!ts->disabled)
+		return;
+
+	ts->disabled = 0;
+	ts->irq_disabled = 0;
+	enable_irq(ts->spi->irq);
+}
+
+static int ads7846_suspend(struct spi_device *spi, pm_message_t message)
+{
+	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
+
+	spin_lock_irq(&ts->lock);
+
+	spi->dev.power.power_state = message;
+	ads7846_disable(ts);
+
+	spin_unlock_irq(&ts->lock);
+
 	return 0;
+
 }
 
 static int ads7846_resume(struct spi_device *spi)
 {
 	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
 
-	ts->irq_disabled = 0;
-	enable_irq(ts->spi->irq);
+	spin_lock_irq(&ts->lock);
+
 	spi->dev.power.power_state = PMSG_ON;
+	ads7846_enable(ts);
+
+	spin_unlock_irq(&ts->lock);
+
 	return 0;
 }
 
@@ -408,6 +588,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	struct ads7846			*ts;
 	struct input_dev		*input_dev;
 	struct ads7846_platform_data	*pdata = spi->dev.platform_data;
+	struct spi_message		*m;
 	struct spi_transfer		*x;
 	int				err;
 
@@ -428,6 +609,11 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
+	if (pdata->get_pendown_state == NULL) {
+		dev_dbg(&spi->dev, "no get_pendown_state function?\n");
+		return -EINVAL;
+	}
+
 	/* We'd set the wordsize to 12 bits ... except that some controllers
 	 * will then treat the 8 bit command words as 12 bits (and drop the
 	 * four MSBs of the 12 bit result).  Result: inputs must be shifted
@@ -451,9 +637,21 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	ts->timer.data = (unsigned long) ts;
 	ts->timer.function = ads7846_timer;
 
+	spin_lock_init(&ts->lock);
+
 	ts->model = pdata->model ? : 7846;
 	ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
 	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+	ts->pressure_max = pdata->pressure_max ? : ~0;
+	if (pdata->debounce_max) {
+		ts->debounce_max = pdata->debounce_max;
+		ts->debounce_tol = pdata->debounce_tol;
+		ts->debounce_rep = pdata->debounce_rep;
+		if (ts->debounce_rep > ts->debounce_max + 1)
+			ts->debounce_rep = ts->debounce_max - 1;
+	} else
+		ts->debounce_tol = ~0;
+	ts->get_pendown_state = pdata->get_pendown_state;
 
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id);
 
@@ -477,60 +675,100 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	/* set up the transfers to read touchscreen state; this assumes we
 	 * use formula #2 for pressure, not #3.
 	 */
-	INIT_LIST_HEAD(&ts->msg.transfers);
+	m = &ts->msg[0];
 	x = ts->xfer;
 
+	spi_message_init(m);
+
 	/* y- still on; turn on only y+ (and ADC) */
 	ts->read_y = READ_Y;
 	x->tx_buf = &ts->read_y;
 	x->len = 1;
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
 
 	x++;
 	x->rx_buf = &ts->tc.y;
 	x->len = 2;
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
+
+	m->complete = ads7846_debounce;
+	m->context = ts;
+
+	m++;
+	spi_message_init(m);
+
+	/* turn y- off, x+ on, then leave in lowpower */
+	x++;
+	ts->read_x = READ_X;
+	x->tx_buf = &ts->read_x;
+	x->len = 1;
+	spi_message_add_tail(x, m);
+
+	x++;
+	x->rx_buf = &ts->tc.x;
+	x->len = 2;
+	spi_message_add_tail(x, m);
+
+	m->complete = ads7846_debounce;
+	m->context = ts;
 
 	/* turn y+ off, x- on; we'll use formula #2 */
 	if (ts->model == 7846) {
+		m++;
+		spi_message_init(m);
+
 		x++;
 		ts->read_z1 = READ_Z1;
 		x->tx_buf = &ts->read_z1;
 		x->len = 1;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
 
 		x++;
 		x->rx_buf = &ts->tc.z1;
 		x->len = 2;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
+
+		m->complete = ads7846_debounce;
+		m->context = ts;
+
+		m++;
+		spi_message_init(m);
 
 		x++;
 		ts->read_z2 = READ_Z2;
 		x->tx_buf = &ts->read_z2;
 		x->len = 1;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
 
 		x++;
 		x->rx_buf = &ts->tc.z2;
 		x->len = 2;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
+
+		m->complete = ads7846_debounce;
+		m->context = ts;
 	}
 
-	/* turn y- off, x+ on, then leave in lowpower */
+	/* power down */
+	m++;
+	spi_message_init(m);
+
 	x++;
-	ts->read_x = READ_X;
-	x->tx_buf = &ts->read_x;
+	ts->pwrdown = PWRDOWN;
+	x->tx_buf = &ts->pwrdown;
 	x->len = 1;
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
 
 	x++;
-	x->rx_buf = &ts->tc.x;
+	x->rx_buf = &ts->dummy;
 	x->len = 2;
 	CS_CHANGE(*x);
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
 
-	ts->msg.complete = ads7846_rx;
-	ts->msg.context = ts;
+	m->complete = ads7846_rx;
+	m->context = ts;
+
+	ts->last_msg = m;
 
 	if (request_irq(spi->irq, ads7846_irq,
 			SA_SAMPLE_RANDOM | SA_TRIGGER_FALLING,
@@ -559,13 +797,27 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		device_create_file(&spi->dev, &dev_attr_vbatt);
 	device_create_file(&spi->dev, &dev_attr_vaux);
 
+	device_create_file(&spi->dev, &dev_attr_pen_down);
+
+	device_create_file(&spi->dev, &dev_attr_disable);
+
 	err = input_register_device(input_dev);
 	if (err)
-		goto err_free_irq;
+		goto err_remove_attr;
 
 	return 0;
 
- err_free_irq:
+ err_remove_attr:
+	device_remove_file(&spi->dev, &dev_attr_disable);
+	device_remove_file(&spi->dev, &dev_attr_pen_down);
+	if (ts->model == 7846) {
+		device_remove_file(&spi->dev, &dev_attr_temp1);
+		device_remove_file(&spi->dev, &dev_attr_temp0);
+	}
+	if (ts->model != 7845)
+		device_remove_file(&spi->dev, &dev_attr_vbatt);
+	device_remove_file(&spi->dev, &dev_attr_vaux);
+
 	free_irq(spi->irq, ts);
  err_free_mem:
 	input_free_device(input_dev);
@@ -577,20 +829,24 @@ static int __devexit ads7846_remove(struct spi_device *spi)
 {
 	struct ads7846		*ts = dev_get_drvdata(&spi->dev);
 
+	input_unregister_device(ts->input);
+
 	ads7846_suspend(spi, PMSG_SUSPEND);
-	free_irq(ts->spi->irq, ts);
-	if (ts->irq_disabled)
-		enable_irq(ts->spi->irq);
 
+	device_remove_file(&spi->dev, &dev_attr_disable);
+	device_remove_file(&spi->dev, &dev_attr_pen_down);
 	if (ts->model == 7846) {
-		device_remove_file(&spi->dev, &dev_attr_temp0);
 		device_remove_file(&spi->dev, &dev_attr_temp1);
+		device_remove_file(&spi->dev, &dev_attr_temp0);
 	}
 	if (ts->model != 7845)
 		device_remove_file(&spi->dev, &dev_attr_vbatt);
 	device_remove_file(&spi->dev, &dev_attr_vaux);
 
-	input_unregister_device(ts->input);
+	free_irq(ts->spi->irq, ts);
+	/* suspend left the IRQ disabled */
+	enable_irq(ts->spi->irq);
+
 	kfree(ts);
 
 	dev_dbg(&spi->dev, "unregistered touchscreen\n");
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index 1042987856f..5013703db0e 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -17,7 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <asm/irq.h>
+//#include <asm/irq.h>
 
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/hardware.h>
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 6081941de1b..4070eff6f0f 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -315,10 +315,11 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 		if (r1_bio->bios[mirror] == bio)
 			break;
 
-	if (error == -ENOTSUPP && test_bit(R1BIO_Barrier, &r1_bio->state)) {
+	if (error == -EOPNOTSUPP && test_bit(R1BIO_Barrier, &r1_bio->state)) {
 		set_bit(BarriersNotsupp, &conf->mirrors[mirror].rdev->flags);
 		set_bit(R1BIO_BarrierRetry, &r1_bio->state);
 		r1_bio->mddev->barriers_work = 0;
+		/* Don't rdev_dec_pending in this branch - keep it for the retry */
 	} else {
 		/*
 		 * this branch is our 'one mirror IO has finished' event handler:
@@ -365,6 +366,7 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 				}
 			}
 		}
+		rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
 	}
 	/*
 	 *
@@ -374,11 +376,9 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 	if (atomic_dec_and_test(&r1_bio->remaining)) {
 		if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) {
 			reschedule_retry(r1_bio);
-			/* Don't dec_pending yet, we want to hold
-			 * the reference over the retry
-			 */
 			goto out;
 		}
+		/* it really is the end of this request */
 		if (test_bit(R1BIO_BehindIO, &r1_bio->state)) {
 			/* free extra copy of the data pages */
 			int i = bio->bi_vcnt;
@@ -393,8 +393,6 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 		md_write_end(r1_bio->mddev);
 		raid_end_bio_io(r1_bio);
 	}
-
-	rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
  out:
 	if (to_put)
 		bio_put(to_put);
@@ -753,18 +751,24 @@ static int make_request(request_queue_t *q, struct bio * bio)
 	const int rw = bio_data_dir(bio);
 	int do_barriers;
 
-	if (unlikely(!mddev->barriers_work && bio_barrier(bio))) {
-		bio_endio(bio, bio->bi_size, -EOPNOTSUPP);
-		return 0;
-	}
-
 	/*
 	 * Register the new request and wait if the reconstruction
 	 * thread has put up a bar for new requests.
 	 * Continue immediately if no resync is active currently.
+	 * We test barriers_work *after* md_write_start as md_write_start
+	 * may cause the first superblock write, and that will check out
+	 * if barriers work.
 	 */
+
 	md_write_start(mddev, bio); /* wait on superblock update early */
 
+	if (unlikely(!mddev->barriers_work && bio_barrier(bio))) {
+		if (rw == WRITE)
+			md_write_end(mddev);
+		bio_endio(bio, bio->bi_size, -EOPNOTSUPP);
+		return 0;
+	}
+
 	wait_barrier(conf);
 
 	disk_stat_inc(mddev->gendisk, ios[rw]);
@@ -1404,10 +1408,11 @@ static void raid1d(mddev_t *mddev)
 			unplug = 1;
 		} else if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) {
 			/* some requests in the r1bio were BIO_RW_BARRIER
-			 * requests which failed with -ENOTSUPP.  Hohumm..
+			 * requests which failed with -EOPNOTSUPP.  Hohumm..
 			 * Better resubmit without the barrier.
 			 * We know which devices to resubmit for, because
 			 * all others have had their bios[] entry cleared.
+			 * We already have a nr_pending reference on these rdevs.
 			 */
 			int i;
 			clear_bit(R1BIO_BarrierRetry, &r1_bio->state);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 617012bc107..1440935414e 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1407,43 +1407,54 @@ static void raid10d(mddev_t *mddev)
 				if (s > (PAGE_SIZE>>9))
 					s = PAGE_SIZE >> 9;
 
+				rcu_read_lock();
 				do {
 					int d = r10_bio->devs[sl].devnum;
-					rdev = conf->mirrors[d].rdev;
+					rdev = rcu_dereference(conf->mirrors[d].rdev);
 					if (rdev &&
-					    test_bit(In_sync, &rdev->flags) &&
-					    sync_page_io(rdev->bdev,
-							 r10_bio->devs[sl].addr +
-							 sect + rdev->data_offset,
-							 s<<9,
-							 conf->tmppage, READ))
-						success = 1;
-					else {
-						sl++;
-						if (sl == conf->copies)
-							sl = 0;
+					    test_bit(In_sync, &rdev->flags)) {
+						atomic_inc(&rdev->nr_pending);
+						rcu_read_unlock();
+						success = sync_page_io(rdev->bdev,
+								       r10_bio->devs[sl].addr +
+								       sect + rdev->data_offset,
+								       s<<9,
+								       conf->tmppage, READ);
+						rdev_dec_pending(rdev, mddev);
+						rcu_read_lock();
+						if (success)
+							break;
 					}
+					sl++;
+					if (sl == conf->copies)
+						sl = 0;
 				} while (!success && sl != r10_bio->read_slot);
+				rcu_read_unlock();
 
 				if (success) {
 					int start = sl;
 					/* write it back and re-read */
+					rcu_read_lock();
 					while (sl != r10_bio->read_slot) {
 						int d;
 						if (sl==0)
 							sl = conf->copies;
 						sl--;
 						d = r10_bio->devs[sl].devnum;
-						rdev = conf->mirrors[d].rdev;
-						atomic_add(s, &rdev->corrected_errors);
+						rdev = rcu_dereference(conf->mirrors[d].rdev);
 						if (rdev &&
 						    test_bit(In_sync, &rdev->flags)) {
+							atomic_inc(&rdev->nr_pending);
+							rcu_read_unlock();
+							atomic_add(s, &rdev->corrected_errors);
 							if (sync_page_io(rdev->bdev,
 									 r10_bio->devs[sl].addr +
 									 sect + rdev->data_offset,
 									 s<<9, conf->tmppage, WRITE) == 0)
 								/* Well, this device is dead */
 								md_error(mddev, rdev);
+							rdev_dec_pending(rdev, mddev);
+							rcu_read_lock();
 						}
 					}
 					sl = start;
@@ -1453,17 +1464,22 @@ static void raid10d(mddev_t *mddev)
 							sl = conf->copies;
 						sl--;
 						d = r10_bio->devs[sl].devnum;
-						rdev = conf->mirrors[d].rdev;
+						rdev = rcu_dereference(conf->mirrors[d].rdev);
 						if (rdev &&
 						    test_bit(In_sync, &rdev->flags)) {
+							atomic_inc(&rdev->nr_pending);
+							rcu_read_unlock();
 							if (sync_page_io(rdev->bdev,
 									 r10_bio->devs[sl].addr +
 									 sect + rdev->data_offset,
 									 s<<9, conf->tmppage, READ) == 0)
 								/* Well, this device is dead */
 								md_error(mddev, rdev);
+							rdev_dec_pending(rdev, mddev);
+							rcu_read_lock();
 						}
 					}
+					rcu_read_unlock();
 				} else {
 					/* Cannot read from anywhere -- bye bye array */
 					md_error(mddev, conf->mirrors[r10_bio->devs[r10_bio->read_slot].devnum].rdev);
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index f9d87b86492..320b3d9384b 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -616,7 +616,7 @@ static struct snd_kcontrol_new snd_cx88_capture_volume = {
  * Only boards with eeprom and byte 1 at eeprom=1 have it
  */
 
-static struct pci_device_id cx88_audio_pci_tbl[] = {
+static struct pci_device_id cx88_audio_pci_tbl[] __devinitdata = {
 	{0x14f1,0x8801,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0x14f1,0x8811,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0, }
diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
index 6061c2d101a..88f0eef9cf3 100644
--- a/drivers/mmc/at91_mci.c
+++ b/drivers/mmc/at91_mci.c
@@ -621,9 +621,6 @@ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct at91mci_host *host = mmc_priv(mmc);
 	unsigned long at91_master_clock = clk_get_rate(mci_clk);
 
-	DBG("Clock %uHz, busmode %u, powermode %u, Vdd %u\n",
-		ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
-
 	if (host)
 		host->bus_mode = ios->bus_mode;
 	else
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index c0326bbc5f2..914d62b2406 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -720,10 +720,6 @@ static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
 {
 	struct au1xmmc_host *host = mmc_priv(mmc);
 
-	DBG("set_ios (power=%u, clock=%uHz, vdd=%u, mode=%u)\n",
-	      host->id, ios->power_mode, ios->clock, ios->vdd,
-	      ios->bus_mode);
-
 	if (ios->power_mode == MMC_POWER_OFF)
 		au1xmmc_set_power(host, 0);
 	else if (ios->power_mode == MMC_POWER_ON) {
diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c
index ffb7f55d346..79358e223f5 100644
--- a/drivers/mmc/imxmmc.c
+++ b/drivers/mmc/imxmmc.c
@@ -102,6 +102,7 @@ struct imxmci_host {
 #define IMXMCI_PEND_CPU_DATA_b	5
 #define IMXMCI_PEND_CARD_XCHG_b	6
 #define IMXMCI_PEND_SET_INIT_b	7
+#define IMXMCI_PEND_STARTED_b	8
 
 #define IMXMCI_PEND_IRQ_m	(1 << IMXMCI_PEND_IRQ_b)
 #define IMXMCI_PEND_DMA_END_m	(1 << IMXMCI_PEND_DMA_END_b)
@@ -111,6 +112,7 @@ struct imxmci_host {
 #define IMXMCI_PEND_CPU_DATA_m	(1 << IMXMCI_PEND_CPU_DATA_b)
 #define IMXMCI_PEND_CARD_XCHG_m	(1 << IMXMCI_PEND_CARD_XCHG_b)
 #define IMXMCI_PEND_SET_INIT_m	(1 << IMXMCI_PEND_SET_INIT_b)
+#define IMXMCI_PEND_STARTED_m	(1 << IMXMCI_PEND_STARTED_b)
 
 static void imxmci_stop_clock(struct imxmci_host *host)
 {
@@ -131,23 +133,52 @@ static void imxmci_stop_clock(struct imxmci_host *host)
 	dev_dbg(mmc_dev(host->mmc), "imxmci_stop_clock blocked, no luck\n");
 }
 
-static void imxmci_start_clock(struct imxmci_host *host)
+static int imxmci_start_clock(struct imxmci_host *host)
 {
-	int i = 0;
+	unsigned int trials = 0;
+	unsigned int delay_limit = 128;
+	unsigned long flags;
+
 	MMC_STR_STP_CLK &= ~STR_STP_CLK_STOP_CLK;
-	while(i < 0x1000) {
-	        if(!(i & 0x7f))
-			MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
 
-		if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN) {
-			/* Check twice before cut */
+	clear_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
+
+	/*
+	 * Command start of the clock, this usually succeeds in less
+	 * then 6 delay loops, but during card detection (low clockrate)
+	 * it takes up to 5000 delay loops and sometimes fails for the first time
+	 */
+	MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
+
+	do {
+		unsigned int delay = delay_limit;
+
+		while(delay--){
 			if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)
-				return;
+				/* Check twice before cut */
+				if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)
+					return 0;
+
+			if(test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events))
+				return 0;
 		}
 
-		i++;
-	}
-	dev_dbg(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n");
+		local_irq_save(flags);
+		/*
+		 * Ensure, that request is not doubled under all possible circumstances.
+		 * It is possible, that cock running state is missed, because some other
+		 * IRQ or schedule delays this function execution and the clocks has
+		 * been already stopped by other means (response processing, SDHC HW)
+		 */
+		if(!test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events))
+			MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
+		local_irq_restore(flags);
+
+	} while(++trials<256);
+
+	dev_err(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n");
+
+	return -1;
 }
 
 static void imxmci_softreset(void)
@@ -498,7 +529,7 @@ static int imxmci_data_done(struct imxmci_host *host, unsigned int stat)
 
 	data_error = imxmci_finish_data(host, stat);
 
-	if (host->req->stop && (data_error == MMC_ERR_NONE)) {
+	if (host->req->stop) {
 		imxmci_stop_clock(host);
 		imxmci_start_cmd(host, host->req->stop, 0);
 	} else {
@@ -622,6 +653,7 @@ static irqreturn_t imxmci_irq(int irq, void *devid, struct pt_regs *regs)
 	atomic_set(&host->stuck_timeout, 0);
 	host->status_reg = stat;
 	set_bit(IMXMCI_PEND_IRQ_b, &host->pending_events);
+	set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
 	tasklet_schedule(&host->tasklet);
 
 	return IRQ_RETVAL(handled);;
@@ -775,10 +807,6 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct imxmci_host *host = mmc_priv(mmc);
 	int prescaler;
 
-	dev_dbg(mmc_dev(host->mmc), "clock %u power %u vdd %u width %u\n",
-		ios->clock, ios->power_mode, ios->vdd,
-		(ios->bus_width==MMC_BUS_WIDTH_4)?4:1);
-
 	if( ios->bus_width==MMC_BUS_WIDTH_4 ) {
 		host->actual_bus_width = MMC_BUS_WIDTH_4;
 		imx_gpio_mode(PB11_PF_SD_DAT3);
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index da6ddd910fc..1ca2c8b9c9b 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -59,21 +59,23 @@ static const unsigned int tacc_mant[] = {
 
 
 /**
- *	mmc_request_done - finish processing an MMC command
- *	@host: MMC host which completed command
- *	@mrq: MMC request which completed
+ *	mmc_request_done - finish processing an MMC request
+ *	@host: MMC host which completed request
+ *	@mrq: MMC request which request
  *
  *	MMC drivers should call this function when they have completed
- *	their processing of a command.  This should be called before the
- *	data part of the command has completed.
+ *	their processing of a request.
  */
 void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
 {
 	struct mmc_command *cmd = mrq->cmd;
-	int err = mrq->cmd->error;
-	pr_debug("MMC: req done (%02x): %d: %08x %08x %08x %08x\n",
-		 cmd->opcode, err, cmd->resp[0], cmd->resp[1],
-		 cmd->resp[2], cmd->resp[3]);
+	int err = cmd->error;
+
+	pr_debug("%s: req done (CMD%u): %d/%d/%d: %08x %08x %08x %08x\n",
+		 mmc_hostname(host), cmd->opcode, err,
+		 mrq->data ? mrq->data->error : 0,
+		 mrq->stop ? mrq->stop->error : 0,
+		 cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
 
 	if (err && cmd->retries) {
 		cmd->retries--;
@@ -97,8 +99,9 @@ EXPORT_SYMBOL(mmc_request_done);
 void
 mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 {
-	pr_debug("MMC: starting cmd %02x arg %08x flags %08x\n",
-		 mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags);
+	pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
+		 mmc_hostname(host), mrq->cmd->opcode,
+		 mrq->cmd->arg, mrq->cmd->flags);
 
 	WARN_ON(host->card_busy == NULL);
 
@@ -312,6 +315,18 @@ void mmc_release_host(struct mmc_host *host)
 
 EXPORT_SYMBOL(mmc_release_host);
 
+static inline void mmc_set_ios(struct mmc_host *host)
+{
+	struct mmc_ios *ios = &host->ios;
+
+	pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
+		 mmc_hostname(host), ios->clock, ios->bus_mode,
+		 ios->power_mode, ios->chip_select, ios->vdd,
+		 ios->bus_width);
+	
+	host->ops->set_ios(host, ios);
+}
+
 static int mmc_select_card(struct mmc_host *host, struct mmc_card *card)
 {
 	int err;
@@ -364,7 +379,7 @@ static int mmc_select_card(struct mmc_host *host, struct mmc_card *card)
 		}
 	}
 
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	return MMC_ERR_NONE;
 }
@@ -415,7 +430,7 @@ static u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
 		ocr = 3 << bit;
 
 		host->ios.vdd = bit;
-		host->ops->set_ios(host, &host->ios);
+		mmc_set_ios(host);
 	} else {
 		ocr = 0;
 	}
@@ -549,6 +564,7 @@ static void mmc_decode_csd(struct mmc_card *card)
 		csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
 		csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
 		csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
+		csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
 		csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
 		csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
 	} else {
@@ -583,6 +599,7 @@ static void mmc_decode_csd(struct mmc_card *card)
 		csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
 		csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
 		csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
+		csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
 		csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
 		csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
 	}
@@ -666,7 +683,7 @@ static void mmc_idle_cards(struct mmc_host *host)
 	struct mmc_command cmd;
 
 	host->ios.chip_select = MMC_CS_HIGH;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_delay(1);
 
@@ -679,7 +696,7 @@ static void mmc_idle_cards(struct mmc_host *host)
 	mmc_delay(1);
 
 	host->ios.chip_select = MMC_CS_DONTCARE;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_delay(1);
 }
@@ -704,13 +721,13 @@ static void mmc_power_up(struct mmc_host *host)
 	host->ios.chip_select = MMC_CS_DONTCARE;
 	host->ios.power_mode = MMC_POWER_UP;
 	host->ios.bus_width = MMC_BUS_WIDTH_1;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_delay(1);
 
 	host->ios.clock = host->f_min;
 	host->ios.power_mode = MMC_POWER_ON;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_delay(2);
 }
@@ -723,7 +740,7 @@ static void mmc_power_off(struct mmc_host *host)
 	host->ios.chip_select = MMC_CS_DONTCARE;
 	host->ios.power_mode = MMC_POWER_OFF;
 	host->ios.bus_width = MMC_BUS_WIDTH_1;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 }
 
 static int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
@@ -971,7 +988,8 @@ static unsigned int mmc_calculate_clock(struct mmc_host *host)
 		if (!mmc_card_dead(card) && max_dtr > card->csd.max_dtr)
 			max_dtr = card->csd.max_dtr;
 
-	pr_debug("MMC: selected %d.%03dMHz transfer rate\n",
+	pr_debug("%s: selected %d.%03dMHz transfer rate\n",
+		 mmc_hostname(host),
 		 max_dtr / 1000000, (max_dtr / 1000) % 1000);
 
 	return max_dtr;
@@ -1046,7 +1064,7 @@ static void mmc_setup(struct mmc_host *host)
 	} else {
 		host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
 		host->ios.clock = host->f_min;
-		host->ops->set_ios(host, &host->ios);
+		mmc_set_ios(host);
 
 		/*
 		 * We should remember the OCR mask from the existing
@@ -1082,7 +1100,7 @@ static void mmc_setup(struct mmc_host *host)
 	 * Ok, now switch to push-pull mode.
 	 */
 	host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_read_csds(host);
 
@@ -1128,7 +1146,7 @@ static void mmc_rescan(void *data)
 		 * attached cards and the host support.
 		 */
 		host->ios.clock = mmc_calculate_clock(host);
-		host->ops->set_ios(host, &host->ios);
+		mmc_set_ios(host);
 	}
 
 	mmc_release_host(host);
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index 8eb2a2ede64..06bd1f4cb9b 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -187,6 +187,12 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 			brq.cmd.opcode = MMC_WRITE_BLOCK;
 			brq.data.flags |= MMC_DATA_WRITE;
 			brq.data.blocks = 1;
+
+			/*
+			 * Scale up the timeout by the r2w factor
+			 */
+			brq.data.timeout_ns <<= card->csd.r2w_factor;
+			brq.data.timeout_clks <<= card->csd.r2w_factor;
 		}
 
 		if (brq.data.blocks > 1) {
diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
index df7e861e2fc..da8e4d7339c 100644
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -402,9 +402,6 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct mmci_host *host = mmc_priv(mmc);
 	u32 clk = 0, pwr = 0;
 
-	DBG(host, "clock %uHz busmode %u powermode %u Vdd %u\n",
-	    ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
-
 	if (ios->clock) {
 		if (ios->clock >= host->mclk) {
 			clk = MCI_CLK_BYPASS;
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index eb42cb34942..f97b472085c 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -198,7 +198,6 @@ static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd,
 
 static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
 {
-	pr_debug("PXAMCI: request done\n");
 	host->mrq = NULL;
 	host->cmd = NULL;
 	host->data = NULL;
@@ -291,7 +290,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
 	pxamci_disable_irq(host, DATA_TRAN_DONE);
 
 	host->data = NULL;
-	if (host->mrq->stop && data->error == MMC_ERR_NONE) {
+	if (host->mrq->stop) {
 		pxamci_stop_clock(host);
 		pxamci_start_cmd(host, host->mrq->stop, 0);
 	} else {
@@ -309,12 +308,10 @@ static irqreturn_t pxamci_irq(int irq, void *devid, struct pt_regs *regs)
 
 	ireg = readl(host->base + MMC_I_REG);
 
-	pr_debug("PXAMCI: irq %08x\n", ireg);
-
 	if (ireg) {
 		unsigned stat = readl(host->base + MMC_STAT);
 
-		pr_debug("PXAMCI: stat %08x\n", stat);
+		pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat);
 
 		if (ireg & END_CMD_RES)
 			handled |= pxamci_cmd_done(host, stat);
@@ -368,10 +365,6 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct pxamci_host *host = mmc_priv(mmc);
 
-	pr_debug("pxamci_set_ios: clock %u power %u vdd %u.%02u\n",
-		 ios->clock, ios->power_mode, ios->vdd / 100,
-		 ios->vdd % 100);
-
 	if (ios->clock) {
 		unsigned int clk = CLOCKRATE / ios->clock;
 		if (CLOCKRATE / clk > ios->clock)
@@ -397,7 +390,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			host->cmdat |= CMDAT_INIT;
 	}
 
-	pr_debug("pxamci_set_ios: clkrt = %x cmdat = %x\n",
+	pr_debug("PXAMCI: clkrt = %x cmdat = %x\n",
 		 host->clkrt, host->cmdat);
 }
 
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index bdbfca05002..b0053280ff2 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -570,10 +570,6 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	spin_lock_irqsave(&host->lock, flags);
 
-	DBG("clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
-	     ios->clock, ios->bus_mode, ios->power_mode, ios->chip_select,
-	     ios->vdd, ios->bus_width);
-
 	/*
 	 * Reset the chip on each power off.
 	 * Should clear out any weird states.
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 511f7b0b31d..39b3d97f891 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -931,10 +931,6 @@ static void wbsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct wbsd_host *host = mmc_priv(mmc);
 	u8 clk, setup, pwr;
 
-	DBGF("clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
-		ios->clock, ios->bus_mode, ios->power_mode, ios->chip_select,
-		ios->vdd, ios->bus_width);
-
 	spin_lock_bh(&host->lock);
 
 	/*
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 9788b1ef2e7..f7235c9bc42 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -106,6 +106,7 @@
  *	0.51: 20 Jan 2006: Add 64bit consistent memory allocation for rings.
  *	0.52: 20 Jan 2006: Add MSI/MSIX support.
  *	0.53: 19 Mar 2006: Fix init from low power mode and add hw reset.
+ *	0.54: 21 Mar 2006: Fix spin locks for multi irqs and cleanup.
  *
  * Known bugs:
  * We suspect that on some hardware no TX done interrupts are generated.
@@ -117,7 +118,7 @@
  * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
  * superfluous timer interrupts from the nic.
  */
-#define FORCEDETH_VERSION		"0.53"
+#define FORCEDETH_VERSION		"0.54"
 #define DRV_NAME			"forcedeth"
 
 #include <linux/module.h>
@@ -710,6 +711,72 @@ static void setup_hw_rings(struct net_device *dev, int rxtx_flags)
 	}
 }
 
+static int using_multi_irqs(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+
+	if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
+	    ((np->msi_flags & NV_MSI_X_ENABLED) &&
+	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1)))
+		return 0;
+	else
+		return 1;
+}
+
+static void nv_enable_irq(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			enable_irq(dev->irq);
+	} else {
+		enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
+		enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
+		enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
+	}
+}
+
+static void nv_disable_irq(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			disable_irq(dev->irq);
+	} else {
+		disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
+		disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
+		disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
+	}
+}
+
+/* In MSIX mode, a write to irqmask behaves as XOR */
+static void nv_enable_hw_interrupts(struct net_device *dev, u32 mask)
+{
+	u8 __iomem *base = get_hwbase(dev);
+
+	writel(mask, base + NvRegIrqMask);
+}
+
+static void nv_disable_hw_interrupts(struct net_device *dev, u32 mask)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	u8 __iomem *base = get_hwbase(dev);
+
+	if (np->msi_flags & NV_MSI_X_ENABLED) {
+		writel(mask, base + NvRegIrqMask);
+	} else {
+		if (np->msi_flags & NV_MSI_ENABLED)
+			writel(0, base + NvRegMSIIrqMask);
+		writel(0, base + NvRegIrqMask);
+	}
+}
+
 #define MII_READ	(-1)
 /* mii_rw: read/write a register on the PHY.
  *
@@ -1019,24 +1086,25 @@ static void nv_do_rx_refill(unsigned long data)
 	struct net_device *dev = (struct net_device *) data;
 	struct fe_priv *np = netdev_priv(dev);
 
-
-	if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-	    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-		disable_irq(dev->irq);
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			disable_irq(dev->irq);
 	} else {
 		disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
 	}
 	if (nv_alloc_rx(dev)) {
-		spin_lock(&np->lock);
+		spin_lock_irq(&np->lock);
 		if (!np->in_shutdown)
 			mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
-		spin_unlock(&np->lock);
+		spin_unlock_irq(&np->lock);
 	}
-	if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-	    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-		enable_irq(dev->irq);
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			enable_irq(dev->irq);
 	} else {
 		enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
 	}
@@ -1668,15 +1736,7 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu)
 		 * guessed, there is probably a simpler approach.
 		 * Changing the MTU is a rare event, it shouldn't matter.
 		 */
-		if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-		    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-		     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-			disable_irq(dev->irq);
-		} else {
-			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
-			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
-			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
-		}
+		nv_disable_irq(dev);
 		spin_lock_bh(&dev->xmit_lock);
 		spin_lock(&np->lock);
 		/* stop engines */
@@ -1709,15 +1769,7 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu)
 		nv_start_tx(dev);
 		spin_unlock(&np->lock);
 		spin_unlock_bh(&dev->xmit_lock);
-		if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-		    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-		     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-			enable_irq(dev->irq);
-		} else {
-			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
-			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
-			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
-		}
+		nv_enable_irq(dev);
 	}
 	return 0;
 }
@@ -2108,16 +2160,16 @@ static irqreturn_t nv_nic_irq_tx(int foo, void *data, struct pt_regs *regs)
 		if (!(events & np->irqmask))
 			break;
 
-		spin_lock(&np->lock);
+		spin_lock_irq(&np->lock);
 		nv_tx_done(dev);
-		spin_unlock(&np->lock);
+		spin_unlock_irq(&np->lock);
 		
 		if (events & (NVREG_IRQ_TX_ERR)) {
 			dprintk(KERN_DEBUG "%s: received irq with events 0x%x. Probably TX fail.\n",
 						dev->name, events);
 		}
 		if (i > max_interrupt_work) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			/* disable interrupts on the nic */
 			writel(NVREG_IRQ_TX_ALL, base + NvRegIrqMask);
 			pci_push(base);
@@ -2127,7 +2179,7 @@ static irqreturn_t nv_nic_irq_tx(int foo, void *data, struct pt_regs *regs)
 				mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
 			}
 			printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_tx.\n", dev->name, i);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 			break;
 		}
 
@@ -2157,14 +2209,14 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs)
 		
 		nv_rx_process(dev);
 		if (nv_alloc_rx(dev)) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			if (!np->in_shutdown)
 				mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 		}
 		
 		if (i > max_interrupt_work) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			/* disable interrupts on the nic */
 			writel(NVREG_IRQ_RX_ALL, base + NvRegIrqMask);
 			pci_push(base);
@@ -2174,7 +2226,7 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs)
 				mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
 			}
 			printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_rx.\n", dev->name, i);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 			break;
 		}
 
@@ -2203,14 +2255,14 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data, struct pt_regs *regs)
 			break;
 		
 		if (events & NVREG_IRQ_LINK) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			nv_link_irq(dev);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 		}
 		if (np->need_linktimer && time_after(jiffies, np->link_timeout)) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			nv_linkchange(dev);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 			np->link_timeout = jiffies + LINK_TIMEOUT;
 		}
 		if (events & (NVREG_IRQ_UNKNOWN)) {
@@ -2218,7 +2270,7 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data, struct pt_regs *regs)
 						dev->name, events);
 		}
 		if (i > max_interrupt_work) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			/* disable interrupts on the nic */
 			writel(NVREG_IRQ_OTHER, base + NvRegIrqMask);
 			pci_push(base);
@@ -2228,7 +2280,7 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data, struct pt_regs *regs)
 				mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
 			}
 			printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_other.\n", dev->name, i);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 			break;
 		}
 
@@ -2251,10 +2303,11 @@ static void nv_do_nic_poll(unsigned long data)
 	 * nv_nic_irq because that may decide to do otherwise
 	 */
 
-	if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-	    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-		disable_irq(dev->irq);
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			disable_irq(dev->irq);
 		mask = np->irqmask;
 	} else {
 		if (np->nic_poll_irq & NVREG_IRQ_RX_ALL) {
@@ -2277,11 +2330,12 @@ static void nv_do_nic_poll(unsigned long data)
 	writel(mask, base + NvRegIrqMask);
 	pci_push(base);
 
-	if (!(np->msi_flags & NV_MSI_X_ENABLED) || 
-	    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
+	if (!using_multi_irqs(dev)) {
 		nv_nic_irq((int) 0, (void *) data, (struct pt_regs *) NULL);
-		enable_irq(dev->irq);
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			enable_irq(dev->irq);
 	} else {
 		if (np->nic_poll_irq & NVREG_IRQ_RX_ALL) {
 			nv_nic_irq_rx((int) 0, (void *) data, (struct pt_regs *) NULL);
@@ -2628,6 +2682,113 @@ static void set_msix_vector_map(struct net_device *dev, u32 vector, u32 irqmask)
 	writel(readl(base + NvRegMSIXMap1) | msixmap, base + NvRegMSIXMap1);
 }
 
+static int nv_request_irq(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	u8 __iomem *base = get_hwbase(dev);
+	int ret = 1;
+	int i;
+
+	if (np->msi_flags & NV_MSI_X_CAPABLE) {
+		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
+			np->msi_x_entry[i].entry = i;
+		}
+		if ((ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK))) == 0) {
+			np->msi_flags |= NV_MSI_X_ENABLED;
+			if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) {
+				/* Request irq for rx handling */
+				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, SA_SHIRQ, dev->name, dev) != 0) {
+					printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
+					pci_disable_msix(np->pci_dev);
+					np->msi_flags &= ~NV_MSI_X_ENABLED;
+					goto out_err;
+				}
+				/* Request irq for tx handling */
+				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, SA_SHIRQ, dev->name, dev) != 0) {
+					printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
+					pci_disable_msix(np->pci_dev);
+					np->msi_flags &= ~NV_MSI_X_ENABLED;
+					goto out_free_rx;
+				}
+				/* Request irq for link and timer handling */
+				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, SA_SHIRQ, dev->name, dev) != 0) {
+					printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
+					pci_disable_msix(np->pci_dev);
+					np->msi_flags &= ~NV_MSI_X_ENABLED;
+					goto out_free_tx;
+				}
+				/* map interrupts to their respective vector */
+				writel(0, base + NvRegMSIXMap0);
+				writel(0, base + NvRegMSIXMap1);
+				set_msix_vector_map(dev, NV_MSI_X_VECTOR_RX, NVREG_IRQ_RX_ALL);
+				set_msix_vector_map(dev, NV_MSI_X_VECTOR_TX, NVREG_IRQ_TX_ALL);
+				set_msix_vector_map(dev, NV_MSI_X_VECTOR_OTHER, NVREG_IRQ_OTHER);
+			} else {
+				/* Request irq for all interrupts */
+				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
+					printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+					pci_disable_msix(np->pci_dev);
+					np->msi_flags &= ~NV_MSI_X_ENABLED;
+					goto out_err;
+				}
+
+				/* map interrupts to vector 0 */
+				writel(0, base + NvRegMSIXMap0);
+				writel(0, base + NvRegMSIXMap1);
+			}
+		}
+	}
+	if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
+		if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
+			np->msi_flags |= NV_MSI_ENABLED;
+			if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
+				printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+				pci_disable_msi(np->pci_dev);
+				np->msi_flags &= ~NV_MSI_ENABLED;
+				goto out_err;
+			}
+
+			/* map interrupts to vector 0 */
+			writel(0, base + NvRegMSIMap0);
+			writel(0, base + NvRegMSIMap1);
+			/* enable msi vector 0 */
+			writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
+		}
+	}
+	if (ret != 0) {
+		if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0)
+			goto out_err;
+	}
+
+	return 0;
+out_free_tx:
+	free_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, dev);
+out_free_rx:
+	free_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, dev);
+out_err:
+	return 1;
+}
+
+static void nv_free_irq(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	int i;
+
+	if (np->msi_flags & NV_MSI_X_ENABLED) {
+		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
+			free_irq(np->msi_x_entry[i].vector, dev);
+		}
+		pci_disable_msix(np->pci_dev);
+		np->msi_flags &= ~NV_MSI_X_ENABLED;
+	} else {
+		free_irq(np->pci_dev->irq, dev);
+		if (np->msi_flags & NV_MSI_ENABLED) {
+			pci_disable_msi(np->pci_dev);
+			np->msi_flags &= ~NV_MSI_ENABLED;
+		}
+	}
+}
+
 static int nv_open(struct net_device *dev)
 {
 	struct fe_priv *np = netdev_priv(dev);
@@ -2720,12 +2881,16 @@ static int nv_open(struct net_device *dev)
 	udelay(10);
 	writel(readl(base + NvRegPowerState) | NVREG_POWERSTATE_VALID, base + NvRegPowerState);
 
-	writel(0, base + NvRegIrqMask);
+	nv_disable_hw_interrupts(dev, np->irqmask);
 	pci_push(base);
 	writel(NVREG_MIISTAT_MASK2, base + NvRegMIIStatus);
 	writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
 	pci_push(base);
 
+	if (nv_request_irq(dev)) {
+		goto out_drain;
+	}
+
 	if (np->msi_flags & NV_MSI_X_CAPABLE) {
 		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
 			np->msi_x_entry[i].entry = i;
@@ -2799,7 +2964,7 @@ static int nv_open(struct net_device *dev)
 	}
 
 	/* ask for interrupts */
-	writel(np->irqmask, base + NvRegIrqMask);
+	nv_enable_hw_interrupts(dev, np->irqmask);
 
 	spin_lock_irq(&np->lock);
 	writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
@@ -2843,7 +3008,6 @@ static int nv_close(struct net_device *dev)
 {
 	struct fe_priv *np = netdev_priv(dev);
 	u8 __iomem *base;
-	int i;
 
 	spin_lock_irq(&np->lock);
 	np->in_shutdown = 1;
@@ -2861,31 +3025,13 @@ static int nv_close(struct net_device *dev)
 
 	/* disable interrupts on the nic or we will lock up */
 	base = get_hwbase(dev);
-	if (np->msi_flags & NV_MSI_X_ENABLED) {
-		writel(np->irqmask, base + NvRegIrqMask);
-	} else {
-		if (np->msi_flags & NV_MSI_ENABLED)
-			writel(0, base + NvRegMSIIrqMask);
-		writel(0, base + NvRegIrqMask);
-	}
+	nv_disable_hw_interrupts(dev, np->irqmask);
 	pci_push(base);
 	dprintk(KERN_INFO "%s: Irqmask is zero again\n", dev->name);
 
 	spin_unlock_irq(&np->lock);
 
-	if (np->msi_flags & NV_MSI_X_ENABLED) {
-		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
-			free_irq(np->msi_x_entry[i].vector, dev);
-		}
-		pci_disable_msix(np->pci_dev);
-		np->msi_flags &= ~NV_MSI_X_ENABLED;
-	} else {
-		free_irq(np->pci_dev->irq, dev);
-		if (np->msi_flags & NV_MSI_ENABLED) {
-			pci_disable_msi(np->pci_dev);
-			np->msi_flags &= ~NV_MSI_ENABLED;
-		}
-	}
+	nv_free_irq(dev);
 
 	drain_ring(dev);
 
@@ -2974,20 +3120,18 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	if (id->driver_data & DEV_HAS_HIGH_DMA) {
 		/* packet format 3: supports 40-bit addressing */
 		np->desc_ver = DESC_VER_3;
+		np->txrxctl_bits = NVREG_TXRXCTL_DESC_3;
 		if (pci_set_dma_mask(pci_dev, DMA_39BIT_MASK)) {
 			printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
 					pci_name(pci_dev));
 		} else {
-			if (pci_set_consistent_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
-				printk(KERN_INFO "forcedeth: 64-bit DMA (consistent) failed for device %s.\n",
-					pci_name(pci_dev));
-				goto out_relreg;
-			} else {
-				dev->features |= NETIF_F_HIGHDMA;
-				printk(KERN_INFO "forcedeth: using HIGHDMA\n");
-			}
+			dev->features |= NETIF_F_HIGHDMA;
+			printk(KERN_INFO "forcedeth: using HIGHDMA\n");
+		}
+		if (pci_set_consistent_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
+			printk(KERN_INFO "forcedeth: 64-bit DMA (consistent) failed for device %s.\n",
+			       pci_name(pci_dev));
 		}
-		np->txrxctl_bits = NVREG_TXRXCTL_DESC_3;
 	} else if (id->driver_data & DEV_HAS_LARGEDESC) {
 		/* packet format 2: supports jumbo frames */
 		np->desc_ver = DESC_VER_2;
diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c
index 79a8fbcf5f9..0d5fccc984b 100644
--- a/drivers/net/hamradio/dmascc.c
+++ b/drivers/net/hamradio/dmascc.c
@@ -582,7 +582,6 @@ static int __init setup_adapter(int card_base, int type, int n)
 		INIT_WORK(&priv->rx_work, rx_bh, priv);
 		dev->priv = priv;
 		sprintf(dev->name, "dmascc%i", 2 * n + i);
-		SET_MODULE_OWNER(dev);
 		dev->base_addr = card_base;
 		dev->irq = irq;
 		dev->open = scc_open;
diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c
index 6ace0e914fd..5927784df3f 100644
--- a/drivers/net/hamradio/scc.c
+++ b/drivers/net/hamradio/scc.c
@@ -1550,7 +1550,6 @@ static unsigned char ax25_nocall[AX25_ADDR_LEN] =
 
 static void scc_net_setup(struct net_device *dev)
 {
-	SET_MODULE_OWNER(dev);
 	dev->tx_queue_len    = 16;	/* should be enough... */
 
 	dev->open            = scc_net_open;
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index fe22479eb20..b49884048ca 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -1098,7 +1098,6 @@ static void yam_setup(struct net_device *dev)
 
 	dev->base_addr = yp->iobase;
 	dev->irq = yp->irq;
-	SET_MODULE_OWNER(dev);
 
 	dev->open = yam_open;
 	dev->stop = yam_close;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index ea62a3e7d58..411f4d809c4 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1419,6 +1419,8 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
 	mv643xx_eth_update_pscr(dev, &cmd);
 	mv643xx_set_settings(dev, &cmd);
 
+	SET_MODULE_OWNER(dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
 	err = register_netdev(dev);
 	if (err)
 		goto out;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 73e271e59c6..beeb612be98 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.56"
-#define DRV_MODULE_RELDATE	"Apr 1, 2006"
+#define DRV_MODULE_VERSION	"3.57"
+#define DRV_MODULE_RELDATE	"Apr 28, 2006"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -974,6 +974,8 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
 	return err;
 }
 
+static void tg3_link_report(struct tg3 *);
+
 /* This will reset the tigon3 PHY if there is no valid
  * link unless the FORCE argument is non-zero.
  */
@@ -987,6 +989,11 @@ static int tg3_phy_reset(struct tg3 *tp)
 	if (err != 0)
 		return -EBUSY;
 
+	if (netif_running(tp->dev) && netif_carrier_ok(tp->dev)) {
+		netif_carrier_off(tp->dev);
+		tg3_link_report(tp);
+	}
+
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
@@ -1023,6 +1030,12 @@ out:
 		tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x14e2);
 		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
 	}
+	else if (tp->tg3_flags2 & TG3_FLG2_PHY_JITTER_BUG) {
+		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
+		tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a);
+		tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b);
+		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
+	}
 	/* Set Extended packet length bit (bit 14) on all chips that */
 	/* support jumbo frames */
 	if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
@@ -3531,7 +3544,7 @@ static irqreturn_t tg3_test_isr(int irq, void *dev_id,
 	return IRQ_RETVAL(0);
 }
 
-static int tg3_init_hw(struct tg3 *);
+static int tg3_init_hw(struct tg3 *, int);
 static int tg3_halt(struct tg3 *, int, int);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -3567,7 +3580,7 @@ static void tg3_reset_task(void *_data)
 	tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER;
 
 	tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
-	tg3_init_hw(tp);
+	tg3_init_hw(tp, 1);
 
 	tg3_netif_start(tp);
 
@@ -4042,7 +4055,7 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu)
 
 	tg3_set_mtu(dev, tp, new_mtu);
 
-	tg3_init_hw(tp);
+	tg3_init_hw(tp, 0);
 
 	tg3_netif_start(tp);
 
@@ -5719,9 +5732,23 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p)
 	if (!netif_running(dev))
 		return 0;
 
-	spin_lock_bh(&tp->lock);
-	__tg3_set_mac_addr(tp);
-	spin_unlock_bh(&tp->lock);
+	if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
+		/* Reset chip so that ASF can re-init any MAC addresses it
+		 * needs.
+		 */
+		tg3_netif_stop(tp);
+		tg3_full_lock(tp, 1);
+
+		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
+		tg3_init_hw(tp, 0);
+
+		tg3_netif_start(tp);
+		tg3_full_unlock(tp);
+	} else {
+		spin_lock_bh(&tp->lock);
+		__tg3_set_mac_addr(tp);
+		spin_unlock_bh(&tp->lock);
+	}
 
 	return 0;
 }
@@ -5771,7 +5798,7 @@ static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
 }
 
 /* tp->lock is held. */
-static int tg3_reset_hw(struct tg3 *tp)
+static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 {
 	u32 val, rdmac_mode;
 	int i, err, limit;
@@ -5786,7 +5813,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 		tg3_abort_hw(tp, 1);
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)
+	if ((tp->tg3_flags2 & TG3_FLG2_MII_SERDES) && reset_phy)
 		tg3_phy_reset(tp);
 
 	err = tg3_chip_reset(tp);
@@ -6327,7 +6354,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 		tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
 	}
 
-	err = tg3_setup_phy(tp, 1);
+	err = tg3_setup_phy(tp, reset_phy);
 	if (err)
 		return err;
 
@@ -6400,7 +6427,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 /* Called at device open time to get the chip ready for
  * packet processing.  Invoked with tp->lock held.
  */
-static int tg3_init_hw(struct tg3 *tp)
+static int tg3_init_hw(struct tg3 *tp, int reset_phy)
 {
 	int err;
 
@@ -6413,7 +6440,7 @@ static int tg3_init_hw(struct tg3 *tp)
 
 	tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
 
-	err = tg3_reset_hw(tp);
+	err = tg3_reset_hw(tp, reset_phy);
 
 out:
 	return err;
@@ -6683,7 +6710,7 @@ static int tg3_test_msi(struct tg3 *tp)
 	tg3_full_lock(tp, 1);
 
 	tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-	err = tg3_init_hw(tp);
+	err = tg3_init_hw(tp, 1);
 
 	tg3_full_unlock(tp);
 
@@ -6748,7 +6775,7 @@ static int tg3_open(struct net_device *dev)
 
 	tg3_full_lock(tp, 0);
 
-	err = tg3_init_hw(tp);
+	err = tg3_init_hw(tp, 1);
 	if (err) {
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		tg3_free_rings(tp);
@@ -7839,7 +7866,7 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e
 
 	if (netif_running(dev)) {
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-		tg3_init_hw(tp);
+		tg3_init_hw(tp, 1);
 		tg3_netif_start(tp);
 	}
 
@@ -7884,7 +7911,7 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
 
 	if (netif_running(dev)) {
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-		tg3_init_hw(tp);
+		tg3_init_hw(tp, 1);
 		tg3_netif_start(tp);
 	}
 
@@ -8522,7 +8549,7 @@ static int tg3_test_loopback(struct tg3 *tp)
 	if (!netif_running(tp->dev))
 		return TG3_LOOPBACK_FAILED;
 
-	tg3_reset_hw(tp);
+	tg3_reset_hw(tp, 1);
 
 	if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
 		err |= TG3_MAC_LOOPBACK_FAILED;
@@ -8596,7 +8623,7 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		if (netif_running(dev)) {
 			tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-			tg3_init_hw(tp);
+			tg3_init_hw(tp, 1);
 			tg3_netif_start(tp);
 		}
 
@@ -9377,7 +9404,7 @@ static int tg3_nvram_write_block_buffered(struct tg3 *tp, u32 offset, u32 len,
 
 	        if ((page_off == 0) || (i == 0))
 			nvram_cmd |= NVRAM_CMD_FIRST;
-		else if (page_off == (tp->nvram_pagesize - 4))
+		if (page_off == (tp->nvram_pagesize - 4))
 			nvram_cmd |= NVRAM_CMD_LAST;
 
 		if (i == (len - 4))
@@ -10353,10 +10380,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0)
 		tp->tg3_flags2 |= TG3_FLG2_PHY_5704_A0_BUG;
 
-	if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
-	    (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5755) &&
-	    (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5787))
-		tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
+	if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787)
+			tp->tg3_flags2 |= TG3_FLG2_PHY_JITTER_BUG;
+		else
+			tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
+	}
 
 	tp->coalesce_mode = 0;
 	if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_AX &&
@@ -11569,7 +11599,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
 		tg3_full_lock(tp, 0);
 
 		tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-		tg3_init_hw(tp);
+		tg3_init_hw(tp, 1);
 
 		tp->timer.expires = jiffies + tp->timer_offset;
 		add_timer(&tp->timer);
@@ -11603,7 +11633,7 @@ static int tg3_resume(struct pci_dev *pdev)
 	tg3_full_lock(tp, 0);
 
 	tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-	tg3_init_hw(tp);
+	tg3_init_hw(tp, 1);
 
 	tp->timer.expires = jiffies + tp->timer_offset;
 	add_timer(&tp->timer);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 8c8b987d125..0e29b885d44 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2215,6 +2215,7 @@ struct tg3 {
 #define TG3_FLG2_HW_TSO_2		0x08000000
 #define TG3_FLG2_HW_TSO			(TG3_FLG2_HW_TSO_1 | TG3_FLG2_HW_TSO_2)
 #define TG3_FLG2_1SHOT_MSI		0x10000000
+#define TG3_FLG2_PHY_JITTER_BUG		0x20000000
 
 	u32				split_mode_max_reqs;
 #define SPLIT_MODE_5704_MAX_REQ		3
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 6a23964c131..a6dc53b4250 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -129,6 +129,7 @@
 	- Massive clean-up
 	- Rewrite PHY, media handling (remove options, full_duplex, backoff)
 	- Fix Tx engine race for good
+	- Craig Brind: Zero padded aligned buffers for short packets.
 
 */
 
@@ -1326,7 +1327,12 @@ static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev)
 			rp->stats.tx_dropped++;
 			return 0;
 		}
+
+		/* Padding is not copied and so must be redone. */
 		skb_copy_and_csum_dev(skb, rp->tx_buf[entry]);
+		if (skb->len < ETH_ZLEN)
+			memset(rp->tx_buf[entry] + skb->len, 0,
+			       ETH_ZLEN - skb->len);
 		rp->tx_skbuff_dma[entry] = 0;
 		rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma +
 						      (rp->tx_buf[entry] -
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index bd0308e8981..a2f05f48515 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -509,7 +509,8 @@ static irqreturn_t i365_count_irq(int irq, void *dev, struct pt_regs *regs)
 static u_int __init test_irq(u_short sock, int irq)
 {
     debug(2, "  testing ISA irq %d\n", irq);
-    if (request_irq(irq, i365_count_irq, 0, "scan", i365_count_irq) != 0)
+    if (request_irq(irq, i365_count_irq, SA_PROBEIRQ, "scan",
+			i365_count_irq) != 0)
 	return 1;
     irq_hits = 0; irq_sock = sock;
     msleep(10);
@@ -561,7 +562,7 @@ static u_int __init isa_scan(u_short sock, u_int mask0)
     } else {
 	/* Fallback: just find interrupts that aren't in use */
 	for (i = 0; i < 16; i++)
-	    if ((mask0 & (1 << i)) && (_check_irq(i, 0) == 0))
+	    if ((mask0 & (1 << i)) && (_check_irq(i, SA_PROBEIRQ) == 0))
 		mask1 |= (1 << i);
 	printk("default");
 	/* If scan failed, default to polled status */
@@ -725,7 +726,7 @@ static void __init add_pcic(int ns, int type)
 	u_int cs_mask = mask & ((cs_irq) ? (1<<cs_irq) : ~(1<<12));
 	for (cs_irq = 15; cs_irq > 0; cs_irq--)
 	    if ((cs_mask & (1 << cs_irq)) &&
-		(_check_irq(cs_irq, 0) == 0))
+		(_check_irq(cs_irq, SA_PROBEIRQ) == 0))
 		break;
 	if (cs_irq) {
 	    grab_irq = 1;
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index b1e3e6179e5..6c9ad92747f 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -58,7 +58,7 @@ rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	unsigned long data;
 	ssize_t ret;
 
-	if (count < sizeof(unsigned long))
+	if (count != sizeof(unsigned int) && count < sizeof(unsigned long))
 		return -EINVAL;
 
 	add_wait_queue(&rtc->irq_queue, &wait);
@@ -90,11 +90,16 @@ rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	if (ret == 0) {
 		/* Check for any data updates */
 		if (rtc->ops->read_callback)
-			data = rtc->ops->read_callback(rtc->class_dev.dev, data);
-
-		ret = put_user(data, (unsigned long __user *)buf);
-		if (ret == 0)
-			ret = sizeof(unsigned long);
+			data = rtc->ops->read_callback(rtc->class_dev.dev,
+						       data);
+
+		if (sizeof(int) != sizeof(long) &&
+		    count == sizeof(unsigned int))
+			ret = put_user(data, (unsigned int __user *)buf) ?:
+				sizeof(unsigned int);
+		else
+			ret = put_user(data, (unsigned long __user *)buf) ?:
+				sizeof(unsigned long);
 	}
 	return ret;
 }
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index a3bfebcf31e..cfb1fff3787 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -315,6 +315,11 @@ dasd_increase_state(struct dasd_device *device)
 		rc = dasd_state_basic_to_ready(device);
 
 	if (!rc &&
+	    device->state == DASD_STATE_UNFMT &&
+	    device->target > DASD_STATE_UNFMT)
+		rc = -EPERM;
+
+	if (!rc &&
 	    device->state == DASD_STATE_READY &&
 	    device->target >= DASD_STATE_ONLINE)
 		rc = dasd_state_ready_to_online(device);
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index c1c6f138115..216bc4fba19 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -45,6 +45,7 @@ struct dasd_devmap {
         unsigned int devindex;
         unsigned short features;
 	struct dasd_device *device;
+	struct dasd_uid uid;
 };
 
 /*
@@ -716,6 +717,68 @@ dasd_discipline_show(struct device *dev, struct device_attribute *attr, char *bu
 
 static DEVICE_ATTR(discipline, 0444, dasd_discipline_show, NULL);
 
+static ssize_t
+dasd_alias_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dasd_devmap *devmap;
+	int alias;
+
+	devmap = dasd_find_busid(dev->bus_id);
+	spin_lock(&dasd_devmap_lock);
+	if (!IS_ERR(devmap))
+		alias = devmap->uid.alias;
+	else
+		alias = 0;
+	spin_unlock(&dasd_devmap_lock);
+
+	return sprintf(buf, alias ? "1\n" : "0\n");
+}
+
+static DEVICE_ATTR(alias, 0444, dasd_alias_show, NULL);
+
+static ssize_t
+dasd_vendor_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dasd_devmap *devmap;
+	char *vendor;
+
+	devmap = dasd_find_busid(dev->bus_id);
+	spin_lock(&dasd_devmap_lock);
+	if (!IS_ERR(devmap) && strlen(devmap->uid.vendor) > 0)
+		vendor = devmap->uid.vendor;
+	else
+		vendor = "";
+	spin_unlock(&dasd_devmap_lock);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", vendor);
+}
+
+static DEVICE_ATTR(vendor, 0444, dasd_vendor_show, NULL);
+
+#define UID_STRLEN ( /* vendor */ 3 + 1 + /* serial    */ 14 + 1 +\
+		     /* SSID   */ 4 + 1 + /* unit addr */ 2 + 1)
+
+static ssize_t
+dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dasd_devmap *devmap;
+	char uid[UID_STRLEN];
+
+	devmap = dasd_find_busid(dev->bus_id);
+	spin_lock(&dasd_devmap_lock);
+	if (!IS_ERR(devmap) && strlen(devmap->uid.vendor) > 0)
+		snprintf(uid, sizeof(uid), "%s.%s.%04x.%02x",
+			 devmap->uid.vendor, devmap->uid.serial,
+			 devmap->uid.ssid, devmap->uid.unit_addr);
+	else
+		uid[0] = 0;
+	spin_unlock(&dasd_devmap_lock);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", uid);
+}
+
+static DEVICE_ATTR(uid, 0444, dasd_uid_show, NULL);
+
 /*
  * extended error-reporting
  */
@@ -759,6 +822,9 @@ static DEVICE_ATTR(eer_enabled, 0644, dasd_eer_show, dasd_eer_store);
 static struct attribute * dasd_attrs[] = {
 	&dev_attr_readonly.attr,
 	&dev_attr_discipline.attr,
+	&dev_attr_alias.attr,
+	&dev_attr_vendor.attr,
+	&dev_attr_uid.attr,
 	&dev_attr_use_diag.attr,
 	&dev_attr_eer_enabled.attr,
 	NULL,
@@ -768,6 +834,42 @@ static struct attribute_group dasd_attr_group = {
 	.attrs = dasd_attrs,
 };
 
+
+/*
+ * Return copy of the device unique identifier.
+ */
+int
+dasd_get_uid(struct ccw_device *cdev, struct dasd_uid *uid)
+{
+	struct dasd_devmap *devmap;
+
+	devmap = dasd_find_busid(cdev->dev.bus_id);
+	if (IS_ERR(devmap))
+		return PTR_ERR(devmap);
+	spin_lock(&dasd_devmap_lock);
+	*uid = devmap->uid;
+	spin_unlock(&dasd_devmap_lock);
+	return 0;
+}
+
+/*
+ * Register the given device unique identifier into devmap struct.
+ */
+int
+dasd_set_uid(struct ccw_device *cdev, struct dasd_uid *uid)
+{
+	struct dasd_devmap *devmap;
+
+	devmap = dasd_find_busid(cdev->dev.bus_id);
+	if (IS_ERR(devmap))
+		return PTR_ERR(devmap);
+	spin_lock(&dasd_devmap_lock);
+	devmap->uid = *uid;
+	spin_unlock(&dasd_devmap_lock);
+	return 0;
+}
+EXPORT_SYMBOL(dasd_set_uid);
+
 /*
  * Return value of the specified feature.
  */
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index ee09ef33d08..7d5a6cee4bd 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -446,6 +446,39 @@ dasd_eckd_cdl_reclen(int recid)
 	return LABEL_SIZE;
 }
 
+/*
+ * Generate device unique id that specifies the physical device.
+ */
+static int
+dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid)
+{
+	struct dasd_eckd_private *private;
+	struct dasd_eckd_confdata *confdata;
+
+	private = (struct dasd_eckd_private *) device->private;
+	if (!private)
+		return -ENODEV;
+	confdata = &private->conf_data;
+	if (!confdata)
+		return -ENODEV;
+
+	memset(uid, 0, sizeof(struct dasd_uid));
+	strncpy(uid->vendor, confdata->ned1.HDA_manufacturer,
+		sizeof(uid->vendor) - 1);
+	EBCASC(uid->vendor, sizeof(uid->vendor) - 1);
+	strncpy(uid->serial, confdata->ned1.HDA_location,
+		sizeof(uid->serial) - 1);
+	EBCASC(uid->serial, sizeof(uid->serial) - 1);
+	uid->ssid = confdata->neq.subsystemID;
+	if (confdata->ned2.sneq.flags == 0x40) {
+		uid->alias = 1;
+		uid->unit_addr = confdata->ned2.sneq.base_unit_addr;
+	} else
+		uid->unit_addr = confdata->ned1.unit_addr;
+
+	return 0;
+}
+
 static int
 dasd_eckd_read_conf(struct dasd_device *device)
 {
@@ -507,11 +540,15 @@ dasd_eckd_read_conf(struct dasd_device *device)
 	return 0;
 }
 
-
+/*
+ * Check device characteristics.
+ * If the device is accessible using ECKD discipline, the device is enabled.
+ */
 static int
 dasd_eckd_check_characteristics(struct dasd_device *device)
 {
 	struct dasd_eckd_private *private;
+	struct dasd_uid uid;
 	void *rdc_data;
 	int rc;
 
@@ -536,6 +573,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 
 	/* Read Device Characteristics */
 	rdc_data = (void *) &(private->rdc_data);
+	memset(rdc_data, 0, sizeof(rdc_data));
 	rc = read_dev_chars(device->cdev, &rdc_data, 64);
 	if (rc) {
 		DEV_MESSAGE(KERN_WARNING, device,
@@ -556,8 +594,17 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 
 	/* Read Configuration Data */
 	rc = dasd_eckd_read_conf (device);
-	return rc;
+	if (rc)
+		return rc;
+
+	/* Generate device unique id and register in devmap */
+	rc = dasd_eckd_generate_uid(device, &uid);
+	if (rc)
+		return rc;
 
+	rc = dasd_set_uid(device->cdev, &uid);
+
+	return rc;
 }
 
 static struct dasd_ccw_req *
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index ad8524bb7bb..d5734e976e1 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -228,26 +228,36 @@ struct dasd_eckd_confdata {
 		unsigned char HDA_manufacturer[3];
 		unsigned char HDA_location[2];
 		unsigned char HDA_seqno[12];
-		__u16 ID;
+		__u8 ID;
+		__u8 unit_addr;
 	} __attribute__ ((packed)) ned1;
-	struct {
+	union {
 		struct {
-			unsigned char identifier:2;
-			unsigned char token_id:1;
-			unsigned char sno_valid:1;
-			unsigned char subst_sno:1;
-			unsigned char recNED:1;
-			unsigned char emuNED:1;
-			unsigned char reserved:1;
-		} __attribute__ ((packed)) flags;
-		__u8 descriptor;
-		__u8 reserved[2];
-		unsigned char dev_type[6];
-		unsigned char dev_model[3];
-		unsigned char DASD_manufacturer[3];
-		unsigned char DASD_location[2];
-		unsigned char DASD_seqno[12];
-		__u16 ID;
+			struct {
+				unsigned char identifier:2;
+				unsigned char token_id:1;
+				unsigned char sno_valid:1;
+				unsigned char subst_sno:1;
+				unsigned char recNED:1;
+				unsigned char emuNED:1;
+				unsigned char reserved:1;
+			} __attribute__ ((packed)) flags;
+			__u8 descriptor;
+			__u8 reserved[2];
+			unsigned char dev_type[6];
+			unsigned char dev_model[3];
+			unsigned char DASD_manufacturer[3];
+			unsigned char DASD_location[2];
+			unsigned char DASD_seqno[12];
+			__u16 ID;
+		} __attribute__ ((packed)) ned;
+		struct {
+			unsigned char flags;            /* byte  0    */
+			unsigned char res2[7];          /* byte  1- 7 */
+			unsigned char sua_flags;	/* byte  8    */
+			__u8 base_unit_addr;            /* byte  9    */
+			unsigned char res3[22];	        /* byte 10-31 */
+		} __attribute__ ((packed)) sneq;
 	} __attribute__ ((packed)) ned2;
 	struct {
 		struct {
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 4293ba82752..d4b13e300a7 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -268,6 +268,16 @@ struct dasd_discipline {
 
 extern struct dasd_discipline *dasd_diag_discipline_pointer;
 
+/*
+ * Unique identifier for dasd device.
+ */
+struct dasd_uid {
+	__u8 alias;
+	char vendor[4];
+	char serial[15];
+	__u16 ssid;
+	__u8 unit_addr;
+};
 
 /*
  * Notification numbers for extended error reporting notifications:
@@ -516,6 +526,8 @@ void dasd_devmap_exit(void);
 struct dasd_device *dasd_create_device(struct ccw_device *);
 void dasd_delete_device(struct dasd_device *);
 
+int dasd_get_uid(struct ccw_device *, struct dasd_uid *);
+int dasd_set_uid(struct ccw_device *, struct dasd_uid *);
 int dasd_get_feature(struct ccw_device *, int);
 int dasd_set_feature(struct ccw_device *, int, int);
 
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index c3915f60a3a..d71ef1adea5 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -230,14 +230,16 @@ tape_3590_read_attmsg(struct tape_device *device)
  * These functions are used to schedule follow-up actions from within an
  * interrupt context (like unsolicited interrupts).
  */
+struct work_handler_data {
+	struct tape_device *device;
+	enum tape_op        op;
+	struct work_struct  work;
+};
+
 static void
 tape_3590_work_handler(void *data)
 {
-	struct {
-		struct tape_device *device;
-		enum tape_op op;
-		struct work_struct work;
-	} *p = data;
+	struct work_handler_data *p = data;
 
 	switch (p->op) {
 	case TO_MSEN:
@@ -257,11 +259,7 @@ tape_3590_work_handler(void *data)
 static int
 tape_3590_schedule_work(struct tape_device *device, enum tape_op op)
 {
-	struct {
-		struct tape_device *device;
-		enum tape_op op;
-		struct work_struct work;
-	} *p;
+	struct work_handler_data *p;
 
 	if ((p = kzalloc(sizeof(*p), GFP_ATOMIC)) == NULL)
 		return -ENOMEM;
@@ -316,7 +314,7 @@ tape_3590_bread(struct tape_device *device, struct request *req)
 
 	rq_for_each_bio(bio, req) {
 		bio_for_each_segment(bv, bio, i) {
-			dst = kmap(bv->bv_page) + bv->bv_offset;
+			dst = page_address(bv->bv_page) + bv->bv_offset;
 			for (off = 0; off < bv->bv_len;
 			     off += TAPEBLOCK_HSEC_SIZE) {
 				ccw->flags = CCW_FLAG_CC;
@@ -1168,6 +1166,7 @@ tape_3590_setup_device(struct tape_device *device)
 static void
 tape_3590_cleanup_device(struct tape_device *device)
 {
+	flush_scheduled_work();
 	tape_std_unassign(device);
 
 	kfree(device->discdata);
@@ -1234,6 +1233,7 @@ static struct tape_discipline tape_discipline_3590 = {
 
 static struct ccw_device_id tape_3590_ids[] = {
 	{CCW_DEVICE_DEVTYPE(0x3590, 0, 0x3590, 0), .driver_info = tape_3590},
+	{CCW_DEVICE_DEVTYPE(0x3592, 0, 0x3592, 0), .driver_info = tape_3592},
 	{ /* end of list */ }
 };
 
diff --git a/drivers/s390/char/tape_std.h b/drivers/s390/char/tape_std.h
index 2d311798edf..1fc95235934 100644
--- a/drivers/s390/char/tape_std.h
+++ b/drivers/s390/char/tape_std.h
@@ -153,6 +153,7 @@ enum s390_tape_type {
         tape_3480,
         tape_3490,
         tape_3590,
+        tape_3592,
 };
 
 #endif // _TAPE_STD_H
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 6412b2c3edd..72187e54dca 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -242,28 +242,10 @@ s390_subchannel_remove_chpid(struct device *dev, void *data)
 	if (sch->vpm == mask)
 		goto out_unreg;
 
-	if ((sch->schib.scsw.actl & (SCSW_ACTL_CLEAR_PEND |
-				     SCSW_ACTL_HALT_PEND |
-				     SCSW_ACTL_START_PEND |
-				     SCSW_ACTL_RESUME_PEND)) &&
-	    (sch->schib.pmcw.lpum == mask)) {
-		int cc = cio_cancel(sch);
-		
-		if (cc == -ENODEV)
-			goto out_unreg;
-
-		if (cc == -EINVAL) {
-			cc = cio_clear(sch);
-			if (cc == -ENODEV)
-				goto out_unreg;
-			/* Call handler. */
-			if (sch->driver && sch->driver->termination)
-				sch->driver->termination(&sch->dev);
-			goto out_unlock;
-		}
-	} else if ((sch->schib.scsw.actl & SCSW_ACTL_DEVACT) &&
-		   (sch->schib.scsw.actl & SCSW_ACTL_SCHACT) &&
-		   (sch->schib.pmcw.lpum == mask)) {
+	if ((sch->schib.scsw.actl & SCSW_ACTL_DEVACT) &&
+	    (sch->schib.scsw.actl & SCSW_ACTL_SCHACT) &&
+	    (sch->schib.pmcw.lpum == mask) &&
+	    (sch->vpm == 0)) {
 		int cc;
 
 		cc = cio_clear(sch);
@@ -653,13 +635,13 @@ __chp_add(struct subchannel_id schid, void *data)
 		if (sch->schib.pmcw.chpid[i] == chp->id) {
 			if (stsch(sch->schid, &sch->schib) != 0) {
 				/* Endgame. */
-				spin_unlock(&sch->lock);
+				spin_unlock_irq(&sch->lock);
 				return -ENXIO;
 			}
 			break;
 		}
 	if (i==8) {
-		spin_unlock(&sch->lock);
+		spin_unlock_irq(&sch->lock);
 		return 0;
 	}
 	sch->lpm = ((sch->schib.pmcw.pim &
diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c
index 814f9258ce0..96f519281d9 100644
--- a/drivers/s390/cio/qdio.c
+++ b/drivers/s390/cio/qdio.c
@@ -38,6 +38,7 @@
 #include <linux/kernel.h>
 #include <linux/proc_fs.h>
 #include <linux/timer.h>
+#include <linux/mempool.h>
 
 #include <asm/ccwdev.h>
 #include <asm/io.h>
@@ -80,6 +81,8 @@ static int indicator_used[INDICATORS_PER_CACHELINE];
 static __u32 * volatile indicators;
 static __u32 volatile spare_indicator;
 static atomic_t spare_indicator_usecount;
+#define QDIO_MEMPOOL_SCSSC_ELEMENTS 2
+static mempool_t *qdio_mempool_scssc;
 
 static debug_info_t *qdio_dbf_setup;
 static debug_info_t *qdio_dbf_sbal;
@@ -1637,7 +1640,7 @@ next:
 
 	}
 	kfree(irq_ptr->qdr);
-	kfree(irq_ptr);
+	free_page((unsigned long) irq_ptr);
 }
 
 static void
@@ -2304,7 +2307,7 @@ qdio_get_ssqd_information(struct qdio_irq *irq_ptr)
 
 	QDIO_DBF_TEXT0(0,setup,"getssqd");
 	qdioac = 0;
-	ssqd_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
+	ssqd_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC);
 	if (!ssqd_area) {
 	        QDIO_PRINT_WARN("Could not get memory for chsc. Using all " \
 				"SIGAs for sch x%x.\n", irq_ptr->schid.sch_no);
@@ -2364,7 +2367,7 @@ qdio_get_ssqd_information(struct qdio_irq *irq_ptr)
 out:
 	qdio_check_subchannel_qebsm(irq_ptr, qdioac,
 				    ssqd_area->sch_token);
-	free_page ((unsigned long) ssqd_area);
+	mempool_free(ssqd_area, qdio_mempool_scssc);
 	irq_ptr->qdioac = qdioac;
 }
 
@@ -2458,7 +2461,7 @@ tiqdio_set_subchannel_ind(struct qdio_irq *irq_ptr, int reset_to_zero)
 			virt_to_phys((volatile void *)irq_ptr->dev_st_chg_ind);
 	}
 
-	scssc_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
+	scssc_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC);
 	if (!scssc_area) {
 		QDIO_PRINT_WARN("No memory for setting indicators on " \
 				"subchannel 0.%x.%x.\n",
@@ -2514,7 +2517,7 @@ tiqdio_set_subchannel_ind(struct qdio_irq *irq_ptr, int reset_to_zero)
 	QDIO_DBF_HEX2(0,setup,&real_addr_dev_st_chg_ind,sizeof(unsigned long));
 	result = 0;
 out:
-	free_page ((unsigned long) scssc_area);
+	mempool_free(scssc_area, qdio_mempool_scssc);
 	return result;
 
 }
@@ -2543,7 +2546,7 @@ tiqdio_set_delay_target(struct qdio_irq *irq_ptr, unsigned long delay_target)
 	if (!irq_ptr->is_thinint_irq)
 		return -ENODEV;
 
-	scsscf_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
+	scsscf_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC);
 	if (!scsscf_area) {
 		QDIO_PRINT_WARN("No memory for setting delay target on " \
 				"subchannel 0.%x.%x.\n",
@@ -2581,7 +2584,7 @@ tiqdio_set_delay_target(struct qdio_irq *irq_ptr, unsigned long delay_target)
 	QDIO_DBF_HEX2(0,trace,&delay_target,sizeof(unsigned long));
 	result = 0; /* not critical */
 out:
-	free_page ((unsigned long) scsscf_area);
+	mempool_free(scsscf_area, qdio_mempool_scssc);
 	return result;
 }
 
@@ -2980,7 +2983,7 @@ qdio_allocate(struct qdio_initialize *init_data)
 	qdio_allocate_do_dbf(init_data);
 
 	/* create irq */
-	irq_ptr = kzalloc(sizeof(struct qdio_irq), GFP_KERNEL | GFP_DMA);
+	irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
 
 	QDIO_DBF_TEXT0(0,setup,"irq_ptr:");
 	QDIO_DBF_HEX0(0,setup,&irq_ptr,sizeof(void*));
@@ -2995,7 +2998,7 @@ qdio_allocate(struct qdio_initialize *init_data)
 	/* QDR must be in DMA area since CCW data address is only 32 bit */
 	irq_ptr->qdr=kmalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA);
   	if (!(irq_ptr->qdr)) {
-   		kfree(irq_ptr);
+   		free_page((unsigned long) irq_ptr);
     		QDIO_PRINT_ERR("kmalloc of irq_ptr->qdr failed!\n");
 		return -ENOMEM;
        	}
@@ -3780,6 +3783,16 @@ oom:
 	return -ENOMEM;
 }
 
+static void *qdio_mempool_alloc(gfp_t gfp_mask, void *size)
+{
+	return (void *) get_zeroed_page(gfp_mask|GFP_DMA);
+}
+
+static void qdio_mempool_free(void *element, void *size)
+{
+	free_page((unsigned long) element);
+}
+
 static int __init
 init_QDIO(void)
 {
@@ -3809,6 +3822,10 @@ init_QDIO(void)
 
 	qdio_add_procfs_entry();
 
+	qdio_mempool_scssc = mempool_create(QDIO_MEMPOOL_SCSSC_ELEMENTS,
+					    qdio_mempool_alloc,
+					    qdio_mempool_free, NULL);
+
 	if (tiqdio_check_chsc_availability())
 		QDIO_PRINT_ERR("Not all CHSCs supported. Continuing.\n");
 
@@ -3824,6 +3841,7 @@ cleanup_QDIO(void)
 	qdio_remove_procfs_entry();
 	qdio_release_qdio_memory();
 	qdio_unregister_dbf_views();
+	mempool_destroy(qdio_mempool_scssc);
 
   	printk("qdio: %s: module removed\n",version);
 }
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index b3c6e790779..cb14642d97a 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -8014,7 +8014,6 @@ static int (*qeth_old_arp_constructor) (struct neighbour *);
 
 static struct neigh_ops arp_direct_ops_template = {
 	.family = AF_INET,
-	.destructor = NULL,
 	.solicit = NULL,
 	.error_report = NULL,
 	.output = dev_queue_xmit,
diff --git a/drivers/s390/s390mach.c b/drivers/s390/s390mach.c
index 3bf46660351..f99e55308b3 100644
--- a/drivers/s390/s390mach.c
+++ b/drivers/s390/s390mach.c
@@ -13,6 +13,7 @@
 #include <linux/sched.h>
 #include <linux/errno.h>
 #include <linux/workqueue.h>
+#include <linux/time.h>
 
 #include <asm/lowcore.h>
 
@@ -362,12 +363,19 @@ s390_revalidate_registers(struct mci *mci)
 	return kill_task;
 }
 
+#define MAX_IPD_COUNT	29
+#define MAX_IPD_TIME	(5 * 60 * USEC_PER_SEC) /* 5 minutes */
+
 /*
  * machine check handler.
  */
 void
 s390_do_machine_check(struct pt_regs *regs)
 {
+	static DEFINE_SPINLOCK(ipd_lock);
+	static unsigned long long last_ipd;
+	static int ipd_count;
+	unsigned long long tmp;
 	struct mci *mci;
 	struct mcck_struct *mcck;
 	int umode;
@@ -404,11 +412,27 @@ s390_do_machine_check(struct pt_regs *regs)
 				s390_handle_damage("processing backup machine "
 						   "check with damage.");
 			}
-			if (!umode)
-				s390_handle_damage("processing backup machine "
-						   "check in kernel mode.");
-			mcck->kill_task = 1;
-			mcck->mcck_code = *(unsigned long long *) mci;
+
+			/*
+			 * Nullifying exigent condition, therefore we might
+			 * retry this instruction.
+			 */
+
+			spin_lock(&ipd_lock);
+
+			tmp = get_clock();
+
+			if (((tmp - last_ipd) >> 12) < MAX_IPD_TIME)
+				ipd_count++;
+			else
+				ipd_count = 1;
+
+			last_ipd = tmp;
+
+			if (ipd_count == MAX_IPD_COUNT)
+				s390_handle_damage("too many ipd retries.");
+
+			spin_unlock(&ipd_lock);
 		}
 		else {
 			/* Processing damage -> stopping machine */
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 3e7302692db..a480a3742d4 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -446,7 +446,9 @@ config SCSI_DPT_I2O
 
 config SCSI_ADVANSYS
 	tristate "AdvanSys SCSI support"
-	depends on (ISA || EISA || PCI) && SCSI && BROKEN
+	depends on SCSI
+	depends on ISA || EISA || PCI
+	depends on BROKEN || X86_32
 	help
 	  This is a driver for all SCSI host adapters manufactured by
 	  AdvanSys. It is documented in the kernel source in
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 28b93057b60..2a419634b25 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -2051,7 +2051,7 @@ STATIC ASC_DCNT  AscGetMaxDmaCount(ushort);
 #define ADV_VADDR_TO_U32   virt_to_bus
 #define ADV_U32_TO_VADDR   bus_to_virt
 
-#define AdvPortAddr  ulong              /* Virtual memory address size */
+#define AdvPortAddr  void __iomem *     /* Virtual memory address size */
 
 /*
  * Define Adv Library required memory access macros.
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index aa5eb7ddeda..3b35cb77953 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -5,6 +5,13 @@
  *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *
+ *  2006 (c) MontaVista Software, Inc.
+ * 	Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
  */
 #ifndef CPM_UART_H
 #define CPM_UART_H
@@ -101,12 +108,13 @@ static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo
 	int offset;
 	u32 val = (u32)addr;
 	/* sane check */
-	if ((val >= (u32)pinfo->mem_addr) &&
+	if (likely((val >= (u32)pinfo->mem_addr)) &&
 			(val<((u32)pinfo->mem_addr + pinfo->mem_size))) {
 		offset = val - (u32)pinfo->mem_addr;
 		return pinfo->dma_addr+offset;
 	}
-	printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val);
+	/* something nasty happened */
+	BUG();
 	return 0;
 }
 
@@ -115,12 +123,13 @@ static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo
 	int offset;
 	u32 val = addr;
 	/* sane check */
-	if ((val >= pinfo->dma_addr) &&
-			(val<(pinfo->dma_addr + pinfo->mem_size))) {
+	if (likely((val >= pinfo->dma_addr) &&
+			(val<(pinfo->dma_addr + pinfo->mem_size)))) {
 		offset = val - (u32)pinfo->dma_addr;
 		return (void*)(pinfo->mem_addr+offset);
 	}
-	printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val);
+	/* something nasty happened */
+	BUG();
 	return 0;
 }
 
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index ced193bf9e1..969f9490043 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -12,7 +12,8 @@
  *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
- *            (C) 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
+ *            (C) 2005-2006 MontaVista Software, Inc.
+ * 		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -81,7 +82,7 @@ early_uart_get_pdev(int index)
 }
 
 
-void cpm_uart_count(void)
+static void cpm_uart_count(void)
 {
 	cpm_uart_nr = 0;
 #ifdef CONFIG_SERIAL_CPM_SMC1
@@ -104,6 +105,21 @@ void cpm_uart_count(void)
 #endif
 }
 
+/* Get UART number by its id */
+static int cpm_uart_id2nr(int id)
+{
+	int i;
+	if (id < UART_NR) {
+		for (i=0; i<UART_NR; i++) {
+			if (cpm_uart_port_map[i] == id)
+				return i;
+		}
+	}
+
+	/* not found or invalid argument */
+	return -1;
+}
+
 /*
  * Check, if transmit buffers are processed
 */
@@ -457,7 +473,11 @@ static void cpm_uart_shutdown(struct uart_port *port)
 		}
 
 		/* Shut them really down and reinit buffer descriptors */
-		cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+		if (IS_SMC(pinfo))
+			cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+		else
+			cpm_line_cr_cmd(line, CPM_CR_GRA_STOP_TX);
+
 		cpm_uart_initbd(pinfo);
 	}
 }
@@ -1008,7 +1028,11 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
 	int line;
 	u32 mem, pram;
 
-	for (line=0; line<UART_NR && cpm_uart_port_map[line]!=pdata->fs_no; line++);
+	line = cpm_uart_id2nr(idx);
+	if(line < 0) {
+		printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx);
+		return -1;
+	}
 
 	pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx];
 
@@ -1241,8 +1265,7 @@ static int cpm_uart_drv_probe(struct device *dev)
 	}
 
 	pdata = pdev->dev.platform_data;
-	pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n",
-			cpm_uart_port_map[pdata->fs_no]);
+	pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no));
 
 	if ((ret = cpm_uart_drv_get_platform_data(pdev, 0)))
 		return ret;
@@ -1261,7 +1284,7 @@ static int cpm_uart_drv_remove(struct device *dev)
 	struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
 
 	pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n",
-			cpm_uart_port_map[pdata->fs_no]);
+			cpm_uart_id2nr(pdata->fs_no));
 
         uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
         return 0;
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index a5a30622637..17406a05ce1 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -8,6 +8,8 @@
  *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
+ *            (C) 2006 MontaVista Software, Inc.
+ * 		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 7c6b07aeea9..4b2de08f46d 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -8,6 +8,8 @@
  * 
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
+ *            (C) 2006 MontaVista Software, Inc.
+ * 		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index c3b7a6673e9..d202eb4f384 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -45,6 +45,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hardware.h>
+#include <asm/arch/imx-uart.h>
 
 /* We've been assigned a range on the "Low-density serial ports" major */
 #define SERIAL_IMX_MAJOR	204
@@ -73,7 +74,8 @@ struct imx_port {
 	struct uart_port	port;
 	struct timer_list	timer;
 	unsigned int		old_status;
-	int txirq,rxirq,rtsirq;
+	int			txirq,rxirq,rtsirq;
+	int			have_rtscts:1;
 };
 
 /*
@@ -491,8 +493,12 @@ imx_set_termios(struct uart_port *port, struct termios *termios,
 		ucr2 = UCR2_SRST | UCR2_IRTS;
 
 	if (termios->c_cflag & CRTSCTS) {
-		ucr2 &= ~UCR2_IRTS;
-		ucr2 |= UCR2_CTSC;
+		if( sport->have_rtscts ) {
+			ucr2 &= ~UCR2_IRTS;
+			ucr2 |= UCR2_CTSC;
+		} else {
+			termios->c_cflag &= ~CRTSCTS;
+		}
 	}
 
 	if (termios->c_cflag & CSTOPB)
@@ -719,27 +725,6 @@ static void __init imx_init_ports(void)
 		imx_ports[i].timer.function = imx_timeout;
 		imx_ports[i].timer.data     = (unsigned long)&imx_ports[i];
 	}
-
-	imx_gpio_mode(PC9_PF_UART1_CTS);
-	imx_gpio_mode(PC10_PF_UART1_RTS);
-	imx_gpio_mode(PC11_PF_UART1_TXD);
-	imx_gpio_mode(PC12_PF_UART1_RXD);
-	imx_gpio_mode(PB28_PF_UART2_CTS);
-	imx_gpio_mode(PB29_PF_UART2_RTS);
-
-	imx_gpio_mode(PB30_PF_UART2_TXD);
-	imx_gpio_mode(PB31_PF_UART2_RXD);
-
-#if 0 /* We don't need these, on the mx1 the _modem_ side of the uart
-       * is implemented.
-       */
-	imx_gpio_mode(PD7_AF_UART2_DTR);
-	imx_gpio_mode(PD8_AF_UART2_DCD);
-	imx_gpio_mode(PD9_AF_UART2_RI);
-	imx_gpio_mode(PD10_AF_UART2_DSR);
-#endif
-
-
 }
 
 #ifdef CONFIG_SERIAL_IMX_CONSOLE
@@ -932,7 +917,14 @@ static int serial_imx_resume(struct platform_device *dev)
 
 static int serial_imx_probe(struct platform_device *dev)
 {
+	struct imxuart_platform_data *pdata;
+
 	imx_ports[dev->id].port.dev = &dev->dev;
+
+	pdata = (struct imxuart_platform_data *)dev->dev.platform_data;
+	if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
+		imx_ports[dev->id].have_rtscts = 1;
+
 	uart_add_one_port(&imx_reg, &imx_ports[dev->id].port);
 	platform_set_drvdata(dev, &imx_ports[dev->id]);
 	return 0;
diff --git a/drivers/sn/ioc3.c b/drivers/sn/ioc3.c
index 0b49ff78efc..501316b198e 100644
--- a/drivers/sn/ioc3.c
+++ b/drivers/sn/ioc3.c
@@ -678,7 +678,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 	/* Track PCI-device specific data */
 	pci_set_drvdata(pdev, idd);
 	down_write(&ioc3_devices_rwsem);
-	list_add(&idd->list, &ioc3_devices);
+	list_add_tail(&idd->list, &ioc3_devices);
 	idd->id = ioc3_counter++;
 	up_write(&ioc3_devices_rwsem);
 
diff --git a/drivers/sn/ioc4.c b/drivers/sn/ioc4.c
index 67140a5804f..cdeff909403 100644
--- a/drivers/sn/ioc4.c
+++ b/drivers/sn/ioc4.c
@@ -310,7 +310,7 @@ ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 	pci_set_drvdata(idd->idd_pdev, idd);
 
 	mutex_lock(&ioc4_mutex);
-	list_add(&idd->idd_list, &ioc4_devices);
+	list_add_tail(&idd->idd_list, &ioc4_devices);
 
 	/* Add this IOC4 to all submodules */
 	list_for_each_entry(is, &ioc4_submodules, is_list) {
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 9060e713744..4587087d777 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -400,6 +400,8 @@ config FB_ASILIANT
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Asiliant 69030 chipset
 
 config FB_IMSTT
 	bool "IMS Twin Turbo display support"
diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c
index b367de30b98..600d3e0e08b 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/au1200fb.c
@@ -1920,1925 +1920,3 @@ module_exit(au1200fb_cleanup);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1200 LCD Driver.
- *
- * Copyright 2004-2005 AMD
- * Author: AMD
- *
- * Based on:
- * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
- *  Created 28 Dec 1997 by Geert Uytterhoeven
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ctype.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include "au1200fb.h"
-
-#ifdef CONFIG_PM
-#include <asm/mach-au1x00/au1xxx_pm.h>
-#endif
-
-#ifndef CONFIG_FB_AU1200_DEVS
-#define CONFIG_FB_AU1200_DEVS 4
-#endif
-
-#define DRIVER_NAME "au1200fb"
-#define DRIVER_DESC "LCD controller driver for AU1200 processors"
-
-#define DEBUG 1
-
-#define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg)
-#define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg)
-#define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg)
-
-#if DEBUG
-#define print_dbg(f, arg...) printk(KERN_DEBUG __FILE__ ": " f "\n", ## arg)
-#else
-#define print_dbg(f, arg...) do {} while (0)
-#endif
-
-
-#define AU1200_LCD_FB_IOCTL 0x46FF
-
-#define AU1200_LCD_SET_SCREEN 1
-#define AU1200_LCD_GET_SCREEN 2
-#define AU1200_LCD_SET_WINDOW 3
-#define AU1200_LCD_GET_WINDOW 4
-#define AU1200_LCD_SET_PANEL  5
-#define AU1200_LCD_GET_PANEL  6
-
-#define SCREEN_SIZE		    (1<< 1)
-#define SCREEN_BACKCOLOR    (1<< 2)
-#define SCREEN_BRIGHTNESS   (1<< 3)
-#define SCREEN_COLORKEY     (1<< 4)
-#define SCREEN_MASK         (1<< 5)
-
-struct au1200_lcd_global_regs_t {
-	unsigned int flags;
-	unsigned int xsize;
-	unsigned int ysize;
-	unsigned int backcolor;
-	unsigned int brightness;
-	unsigned int colorkey;
-	unsigned int mask;
-	unsigned int panel_choice;
-	char panel_desc[80];
-
-};
-
-#define WIN_POSITION            (1<< 0)
-#define WIN_ALPHA_COLOR         (1<< 1)
-#define WIN_ALPHA_MODE          (1<< 2)
-#define WIN_PRIORITY            (1<< 3)
-#define WIN_CHANNEL             (1<< 4)
-#define WIN_BUFFER_FORMAT       (1<< 5)
-#define WIN_COLOR_ORDER         (1<< 6)
-#define WIN_PIXEL_ORDER         (1<< 7)
-#define WIN_SIZE                (1<< 8)
-#define WIN_COLORKEY_MODE       (1<< 9)
-#define WIN_DOUBLE_BUFFER_MODE  (1<< 10)
-#define WIN_RAM_ARRAY_MODE      (1<< 11)
-#define WIN_BUFFER_SCALE        (1<< 12)
-#define WIN_ENABLE	            (1<< 13)
-
-struct au1200_lcd_window_regs_t {
-	unsigned int flags;
-	unsigned int xpos;
-	unsigned int ypos;
-	unsigned int alpha_color;
-	unsigned int alpha_mode;
-	unsigned int priority;
-	unsigned int channel;
-	unsigned int buffer_format;
-	unsigned int color_order;
-	unsigned int pixel_order;
-	unsigned int xsize;
-	unsigned int ysize;
-	unsigned int colorkey_mode;
-	unsigned int double_buffer_mode;
-	unsigned int ram_array_mode;
-	unsigned int xscale;
-	unsigned int yscale;
-	unsigned int enable;
-};
-
-
-struct au1200_lcd_iodata_t {
-	unsigned int subcmd;
-	struct au1200_lcd_global_regs_t global;
-	struct au1200_lcd_window_regs_t window;
-};
-
-#if defined(__BIG_ENDIAN)
-#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_11
-#else
-#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_00
-#endif
-#define LCD_CONTROL_DEFAULT_SBPPF LCD_CONTROL_SBPPF_565
-
-/* Private, per-framebuffer management information (independent of the panel itself) */
-struct au1200fb_device {
-	struct fb_info fb_info;			/* FB driver info record */
-
-	int					plane;
-	unsigned char* 		fb_mem;		/* FrameBuffer memory map */
-	unsigned int		fb_len;
-	dma_addr_t    		fb_phys;
-};
-
-static struct au1200fb_device _au1200fb_devices[CONFIG_FB_AU1200_DEVS];
-/********************************************************************/
-
-/* LCD controller restrictions */
-#define AU1200_LCD_MAX_XRES	1280
-#define AU1200_LCD_MAX_YRES	1024
-#define AU1200_LCD_MAX_BPP	32
-#define AU1200_LCD_MAX_CLK	96000000 /* fixme: this needs to go away ? */
-#define AU1200_LCD_NBR_PALETTE_ENTRIES 256
-
-/* Default number of visible screen buffer to allocate */
-#define AU1200FB_NBR_VIDEO_BUFFERS 1
-
-/********************************************************************/
-
-static struct au1200_lcd *lcd = (struct au1200_lcd *) AU1200_LCD_ADDR;
-static int window_index = 2; /* default is zero */
-static int panel_index = 2; /* default is zero */
-static struct window_settings *win;
-static struct panel_settings *panel;
-static int noblanking = 1;
-static int nohwcursor = 0;
-
-struct window_settings {
-	unsigned char name[64];
-	uint32 mode_backcolor;
-	uint32 mode_colorkey;
-	uint32 mode_colorkeymsk;
-	struct {
-		int xres;
-		int yres;
-		int xpos;
-		int ypos;
-		uint32 mode_winctrl1; /* winctrl1[FRM,CCO,PO,PIPE] */
-		uint32 mode_winenable;
-	} w[4];
-};
-
-#if defined(__BIG_ENDIAN)
-#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_00
-#else
-#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_01
-#endif
-
-extern int board_au1200fb_panel_init (void);
-extern int board_au1200fb_panel_shutdown (void);
-
-#ifdef CONFIG_PM
-int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
-		au1xxx_request_t request, void *data);
-au1xxx_power_dev_t *LCD_pm_dev;
-#endif
-
-/*
- * Default window configurations
- */
-static struct window_settings windows[] = {
-	{ /* Index 0 */
-		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
-		/* mode_backcolor	*/ 0x006600ff,
-		/* mode_colorkey,msk*/ 0, 0,
-		{
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ LCD_WINENABLE_WEN0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 100, 100, 100, 100,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ LCD_WINENABLE_WEN1,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ 0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0,
-			},
-		},
-	},
-
-	{ /* Index 1 */
-		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
-		/* mode_backcolor	*/ 0x006600ff,
-		/* mode_colorkey,msk*/ 0, 0,
-		{
-			{
-			/* xres, yres, xpos, ypos */ 320, 240, 5, 5,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_24BPP |
-				LCD_WINCTRL1_PO_00,
-			/* mode_winenable*/ LCD_WINENABLE_WEN0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565
-				| LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ 0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 100, 100, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 200, 25, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0,
-			},
-		},
-	},
-	{ /* Index 2 */
-		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
-		/* mode_backcolor	*/ 0x006600ff,
-		/* mode_colorkey,msk*/ 0, 0,
-		{
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ LCD_WINENABLE_WEN0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ 0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_32BPP |
-				LCD_WINCTRL1_PO_00|LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0,
-			},
-		},
-	},
-	/* Need VGA 640 @ 24bpp, @ 32bpp */
-	/* Need VGA 800 @ 24bpp, @ 32bpp */
-	/* Need VGA 1024 @ 24bpp, @ 32bpp */
-};
-
-/*
- * Controller configurations for various panels.
- */
-
-struct panel_settings
-{
-	const char name[25];		/* Full name <vendor>_<model> */
-
-	struct 	fb_monspecs monspecs; 	/* FB monitor specs */
-
-	/* panel timings */
-	uint32 mode_screen;
-	uint32 mode_horztiming;
-	uint32 mode_verttiming;
-	uint32 mode_clkcontrol;
-	uint32 mode_pwmdiv;
-	uint32 mode_pwmhi;
-	uint32 mode_outmask;
-	uint32 mode_fifoctrl;
-	uint32 mode_toyclksrc;
-	uint32 mode_backlight;
-	uint32 mode_auxpll;
-	int (*device_init)(void);
-	int (*device_shutdown)(void);
-#define Xres min_xres
-#define Yres min_yres
-	u32	min_xres;		/* Minimum horizontal resolution */
-	u32	max_xres;		/* Maximum horizontal resolution */
-	u32 	min_yres;		/* Minimum vertical resolution */
-	u32 	max_yres;		/* Maximum vertical resolution */
-};
-
-/********************************************************************/
-/* fixme: Maybe a modedb for the CRT ? otherwise panels should be as-is */
-
-/* List of panels known to work with the AU1200 LCD controller.
- * To add a new panel, enter the same specifications as the
- * Generic_TFT one, and MAKE SURE that it doesn't conflicts
- * with the controller restrictions. Restrictions are:
- *
- * STN color panels: max_bpp <= 12
- * STN mono panels: max_bpp <= 4
- * TFT panels: max_bpp <= 16
- * max_xres <= 800
- * max_yres <= 600
- */
-static struct panel_settings known_lcd_panels[] =
-{
-	[0] = { /* QVGA 320x240 H:33.3kHz V:110Hz */
-		.name = "QVGA_320x240",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= LCD_SCREEN_SX_N(320) |
-			LCD_SCREEN_SY_N(240),
-		.mode_horztiming	= 0x00c4623b,
-		.mode_verttiming	= 0x00502814,
-		.mode_clkcontrol	= 0x00020002, /* /4=24Mhz */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		320, 320,
-		240, 240,
-	},
-
-	[1] = { /* VGA 640x480 H:30.3kHz V:58Hz */
-		.name = "VGA_640x480",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x13f9df80,
-		.mode_horztiming	= 0x003c5859,
-		.mode_verttiming	= 0x00741201,
-		.mode_clkcontrol	= 0x00020001, /* /4=24Mhz */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		640, 480,
-		640, 480,
-	},
-
-	[2] = { /* SVGA 800x600 H:46.1kHz V:69Hz */
-		.name = "SVGA_800x600",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x18fa5780,
-		.mode_horztiming	= 0x00dc7e77,
-		.mode_verttiming	= 0x00584805,
-		.mode_clkcontrol	= 0x00020000, /* /2=48Mhz */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		800, 800,
-		600, 600,
-	},
-
-	[3] = { /* XVGA 1024x768 H:56.2kHz V:70Hz */
-		.name = "XVGA_1024x768",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x1ffaff80,
-		.mode_horztiming	= 0x007d0e57,
-		.mode_verttiming	= 0x00740a01,
-		.mode_clkcontrol	= 0x000A0000, /* /1 */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 6, /* 72MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		1024, 1024,
-		768, 768,
-	},
-
-	[4] = { /* XVGA XVGA 1280x1024 H:68.5kHz V:65Hz */
-		.name = "XVGA_1280x1024",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x27fbff80,
-		.mode_horztiming	= 0x00cdb2c7,
-		.mode_verttiming	= 0x00600002,
-		.mode_clkcontrol	= 0x000A0000, /* /1 */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 10, /* 120MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		1280, 1280,
-		1024, 1024,
-	},
-
-	[5] = { /* Samsung 1024x768 TFT */
-		.name = "Samsung_1024x768_TFT",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x1ffaff80,
-		.mode_horztiming	= 0x018cc677,
-		.mode_verttiming	= 0x00241217,
-		.mode_clkcontrol	= 0x00000000, /* SCB 0x1 /4=24Mhz */
-		.mode_pwmdiv		= 0x8000063f, /* SCB 0x0 */
-		.mode_pwmhi		= 0x03400000, /* SCB 0x0 */
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
-		1024, 1024,
-		768, 768,
-	},
-
-	[6] = { /* Toshiba 640x480 TFT */
-		.name = "Toshiba_640x480_TFT",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= LCD_SCREEN_SX_N(640) |
-			LCD_SCREEN_SY_N(480),
-		.mode_horztiming	= LCD_HORZTIMING_HPW_N(96) |
-			LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(51),
-		.mode_verttiming	= LCD_VERTTIMING_VPW_N(2) |
-			LCD_VERTTIMING_VND1_N(11) | LCD_VERTTIMING_VND2_N(32),
-		.mode_clkcontrol	= 0x00000000, /* /4=24Mhz */
-		.mode_pwmdiv		= 0x8000063f,
-		.mode_pwmhi		= 0x03400000,
-		.mode_outmask	= 0x00fcfcfc,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
-		640, 480,
-		640, 480,
-	},
-
-	[7] = { /* Sharp 320x240 TFT */
-		.name = "Sharp_320x240_TFT",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 12500,
-			.hfmax = 20000,
-			.vfmin = 38,
-			.vfmax = 81,
-			.dclkmin = 4500000,
-			.dclkmax = 6800000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= LCD_SCREEN_SX_N(320) |
-			LCD_SCREEN_SY_N(240),
-		.mode_horztiming	= LCD_HORZTIMING_HPW_N(60) |
-			LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(2),
-		.mode_verttiming	= LCD_VERTTIMING_VPW_N(2) |
-			LCD_VERTTIMING_VND1_N(2) | LCD_VERTTIMING_VND2_N(5),
-		.mode_clkcontrol	= LCD_CLKCONTROL_PCD_N(7), /*16=6Mhz*/
-		.mode_pwmdiv		= 0x8000063f,
-		.mode_pwmhi		= 0x03400000,
-		.mode_outmask	= 0x00fcfcfc,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
-		320, 320,
-		240, 240,
-	},
-
-	[8] = { /* Toppoly TD070WGCB2 7" 856x480 TFT */
-		.name = "Toppoly_TD070WGCB2",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= LCD_SCREEN_SX_N(856) |
-			LCD_SCREEN_SY_N(480),
-		.mode_horztiming	= LCD_HORZTIMING_HND2_N(43) |
-			LCD_HORZTIMING_HND1_N(43) | LCD_HORZTIMING_HPW_N(114),
-		.mode_verttiming	= LCD_VERTTIMING_VND2_N(20) |
-			LCD_VERTTIMING_VND1_N(21) | LCD_VERTTIMING_VPW_N(4),
-		.mode_clkcontrol	= 0x00020001, /* /4=24Mhz */
-		.mode_pwmdiv		= 0x8000063f,
-		.mode_pwmhi		= 0x03400000,
-		.mode_outmask	= 0x00fcfcfc,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
-		856, 856,
-		480, 480,
-	},
-};
-
-#define NUM_PANELS (ARRAY_SIZE(known_lcd_panels))
-
-/********************************************************************/
-
-#ifdef CONFIG_PM
-static int set_brightness(unsigned int brightness)
-{
-	unsigned int hi1, divider;
-
-	/* limit brightness pwm duty to >= 30/1600 */
-	if (brightness < 30) {
-		brightness = 30;
-	}
-	divider = (lcd->pwmdiv & 0x3FFFF) + 1;
-	hi1 = (lcd->pwmhi >> 16) + 1;
-	hi1 = (((brightness & 0xFF) + 1) * divider >> 8);
-	lcd->pwmhi &= 0xFFFF;
-	lcd->pwmhi |= (hi1 << 16);
-
-	return brightness;
-}
-#endif /* CONFIG_PM */
-
-static int winbpp (unsigned int winctrl1)
-{
-	int bits = 0;
-
-	/* how many bits are needed for each pixel format */
-	switch (winctrl1 & LCD_WINCTRL1_FRM) {
-	case LCD_WINCTRL1_FRM_1BPP:
-		bits = 1;
-		break;
-	case LCD_WINCTRL1_FRM_2BPP:
-		bits = 2;
-		break;
-	case LCD_WINCTRL1_FRM_4BPP:
-		bits = 4;
-		break;
-	case LCD_WINCTRL1_FRM_8BPP:
-		bits = 8;
-		break;
-	case LCD_WINCTRL1_FRM_12BPP:
-	case LCD_WINCTRL1_FRM_16BPP655:
-	case LCD_WINCTRL1_FRM_16BPP565:
-	case LCD_WINCTRL1_FRM_16BPP556:
-	case LCD_WINCTRL1_FRM_16BPPI1555:
-	case LCD_WINCTRL1_FRM_16BPPI5551:
-	case LCD_WINCTRL1_FRM_16BPPA1555:
-	case LCD_WINCTRL1_FRM_16BPPA5551:
-		bits = 16;
-		break;
-	case LCD_WINCTRL1_FRM_24BPP:
-	case LCD_WINCTRL1_FRM_32BPP:
-		bits = 32;
-		break;
-	}
-
-	return bits;
-}
-
-static int fbinfo2index (struct fb_info *fb_info)
-{
-	int i;
-
-	for (i = 0; i < CONFIG_FB_AU1200_DEVS; ++i) {
-		if (fb_info == (struct fb_info *)(&_au1200fb_devices[i].fb_info))
-			return i;
-	}
-	printk("au1200fb: ERROR: fbinfo2index failed!\n");
-	return -1;
-}
-
-static int au1200_setlocation (struct au1200fb_device *fbdev, int plane,
-	int xpos, int ypos)
-{
-	uint32 winctrl0, winctrl1, winenable, fb_offset = 0;
-	int xsz, ysz;
-
-	/* FIX!!! NOT CHECKING FOR COMPLETE OFFSCREEN YET */
-
-	winctrl0 = lcd->window[plane].winctrl0;
-	winctrl1 = lcd->window[plane].winctrl1;
-	winctrl0 &= (LCD_WINCTRL0_A | LCD_WINCTRL0_AEN);
-	winctrl1 &= ~(LCD_WINCTRL1_SZX | LCD_WINCTRL1_SZY);
-
-	/* Check for off-screen adjustments */
-	xsz = win->w[plane].xres;
-	ysz = win->w[plane].yres;
-	if ((xpos + win->w[plane].xres) > panel->Xres) {
-		/* Off-screen to the right */
-		xsz = panel->Xres - xpos; /* off by 1 ??? */
-		/*printk("off screen right\n");*/
-	}
-
-	if ((ypos + win->w[plane].yres) > panel->Yres) {
-		/* Off-screen to the bottom */
-		ysz = panel->Yres - ypos; /* off by 1 ??? */
-		/*printk("off screen bottom\n");*/
-	}
-
-	if (xpos < 0) {
-		/* Off-screen to the left */
-		xsz = win->w[plane].xres + xpos;
-		fb_offset += (((0 - xpos) * winbpp(lcd->window[plane].winctrl1))/8);
-		xpos = 0;
-		/*printk("off screen left\n");*/
-	}
-
-	if (ypos < 0) {
-		/* Off-screen to the top */
-		ysz = win->w[plane].yres + ypos;
-		/* fixme: fb_offset += ((0-ypos)*fb_pars[plane].line_length); */
-		ypos = 0;
-		/*printk("off screen top\n");*/
-	}
-
-	/* record settings */
-	win->w[plane].xpos = xpos;
-	win->w[plane].ypos = ypos;
-
-	xsz -= 1;
-	ysz -= 1;
-	winctrl0 |= (xpos << 21);
-	winctrl0 |= (ypos << 10);
-	winctrl1 |= (xsz << 11);
-	winctrl1 |= (ysz << 0);
-
-	/* Disable the window while making changes, then restore WINEN */
-	winenable = lcd->winenable & (1 << plane);
-	au_sync();
-	lcd->winenable &= ~(1 << plane);
-	lcd->window[plane].winctrl0 = winctrl0;
-	lcd->window[plane].winctrl1 = winctrl1;
-	lcd->window[plane].winbuf0 =
-	lcd->window[plane].winbuf1 = fbdev->fb_phys;
-	lcd->window[plane].winbufctrl = 0; /* select winbuf0 */
-	lcd->winenable |= winenable;
-	au_sync();
-
-	return 0;
-}
-
-static void au1200_setpanel (struct panel_settings *newpanel)
-{
-	/*
-	 * Perform global setup/init of LCD controller
-	 */
-	uint32 winenable;
-
-	/* Make sure all windows disabled */
-	winenable = lcd->winenable;
-	lcd->winenable = 0;
-	au_sync();
-	/*
-	 * Ensure everything is disabled before reconfiguring
-	 */
-	if (lcd->screen & LCD_SCREEN_SEN) {
-		/* Wait for vertical sync period */
-		lcd->intstatus = LCD_INT_SS;
-		while ((lcd->intstatus & LCD_INT_SS) == 0) {
-			au_sync();
-		}
-
-		lcd->screen &= ~LCD_SCREEN_SEN;	/*disable the controller*/
-
-		do {
-			lcd->intstatus = lcd->intstatus; /*clear interrupts*/
-			au_sync();
-		/*wait for controller to shut down*/
-		} while ((lcd->intstatus & LCD_INT_SD) == 0);
-
-		/* Call shutdown of current panel (if up) */
-		/* this must occur last, because if an external clock is driving
-		    the controller, the clock cannot be turned off before first
-			shutting down the controller.
-		 */
-		if (panel->device_shutdown != NULL)
-			panel->device_shutdown();
-	}
-
-	/* Newpanel == NULL indicates a shutdown operation only */
-	if (newpanel == NULL)
-		return;
-
-	panel = newpanel;
-
-	printk("Panel(%s), %dx%d\n", panel->name, panel->Xres, panel->Yres);
-
-	/*
-	 * Setup clocking if internal LCD clock source (assumes sys_auxpll valid)
-	 */
-	if (!(panel->mode_clkcontrol & LCD_CLKCONTROL_EXT))
-	{
-		uint32 sys_clksrc;
-		au_writel(panel->mode_auxpll, SYS_AUXPLL);
-		sys_clksrc = au_readl(SYS_CLKSRC) & ~0x0000001f;
-		sys_clksrc |= panel->mode_toyclksrc;
-		au_writel(sys_clksrc, SYS_CLKSRC);
-	}
-
-	/*
-	 * Configure panel timings
-	 */
-	lcd->screen = panel->mode_screen;
-	lcd->horztiming = panel->mode_horztiming;
-	lcd->verttiming = panel->mode_verttiming;
-	lcd->clkcontrol = panel->mode_clkcontrol;
-	lcd->pwmdiv = panel->mode_pwmdiv;
-	lcd->pwmhi = panel->mode_pwmhi;
-	lcd->outmask = panel->mode_outmask;
-	lcd->fifoctrl = panel->mode_fifoctrl;
-	au_sync();
-
-	/* fixme: Check window settings to make sure still valid
-	 * for new geometry */
-#if 0
-	au1200_setlocation(fbdev, 0, win->w[0].xpos, win->w[0].ypos);
-	au1200_setlocation(fbdev, 1, win->w[1].xpos, win->w[1].ypos);
-	au1200_setlocation(fbdev, 2, win->w[2].xpos, win->w[2].ypos);
-	au1200_setlocation(fbdev, 3, win->w[3].xpos, win->w[3].ypos);
-#endif
-	lcd->winenable = winenable;
-
-	/*
-	 * Re-enable screen now that it is configured
-	 */
-	lcd->screen |= LCD_SCREEN_SEN;
-	au_sync();
-
-	/* Call init of panel */
-	if (panel->device_init != NULL) panel->device_init();
-
-	/* FIX!!!! not appropriate on panel change!!! Global setup/init */
-	lcd->intenable = 0;
-	lcd->intstatus = ~0;
-	lcd->backcolor = win->mode_backcolor;
-
-	/* Setup Color Key - FIX!!! */
-	lcd->colorkey = win->mode_colorkey;
-	lcd->colorkeymsk = win->mode_colorkeymsk;
-
-	/* Setup HWCursor - FIX!!! Need to support this eventually */
-	lcd->hwc.cursorctrl = 0;
-	lcd->hwc.cursorpos = 0;
-	lcd->hwc.cursorcolor0 = 0;
-	lcd->hwc.cursorcolor1 = 0;
-	lcd->hwc.cursorcolor2 = 0;
-	lcd->hwc.cursorcolor3 = 0;
-
-
-#if 0
-#define D(X) printk("%25s: %08X\n", #X, X)
-	D(lcd->screen);
-	D(lcd->horztiming);
-	D(lcd->verttiming);
-	D(lcd->clkcontrol);
-	D(lcd->pwmdiv);
-	D(lcd->pwmhi);
-	D(lcd->outmask);
-	D(lcd->fifoctrl);
-	D(lcd->window[0].winctrl0);
-	D(lcd->window[0].winctrl1);
-	D(lcd->window[0].winctrl2);
-	D(lcd->window[0].winbuf0);
-	D(lcd->window[0].winbuf1);
-	D(lcd->window[0].winbufctrl);
-	D(lcd->window[1].winctrl0);
-	D(lcd->window[1].winctrl1);
-	D(lcd->window[1].winctrl2);
-	D(lcd->window[1].winbuf0);
-	D(lcd->window[1].winbuf1);
-	D(lcd->window[1].winbufctrl);
-	D(lcd->window[2].winctrl0);
-	D(lcd->window[2].winctrl1);
-	D(lcd->window[2].winctrl2);
-	D(lcd->window[2].winbuf0);
-	D(lcd->window[2].winbuf1);
-	D(lcd->window[2].winbufctrl);
-	D(lcd->window[3].winctrl0);
-	D(lcd->window[3].winctrl1);
-	D(lcd->window[3].winctrl2);
-	D(lcd->window[3].winbuf0);
-	D(lcd->window[3].winbuf1);
-	D(lcd->window[3].winbufctrl);
-	D(lcd->winenable);
-	D(lcd->intenable);
-	D(lcd->intstatus);
-	D(lcd->backcolor);
-	D(lcd->winenable);
-	D(lcd->colorkey);
-    D(lcd->colorkeymsk);
-	D(lcd->hwc.cursorctrl);
-	D(lcd->hwc.cursorpos);
-	D(lcd->hwc.cursorcolor0);
-	D(lcd->hwc.cursorcolor1);
-	D(lcd->hwc.cursorcolor2);
-	D(lcd->hwc.cursorcolor3);
-#endif
-}
-
-static void au1200_setmode(struct au1200fb_device *fbdev)
-{
-	int plane = fbdev->plane;
-	/* Window/plane setup */
-	lcd->window[plane].winctrl1 = ( 0
-		| LCD_WINCTRL1_PRI_N(plane)
-		| win->w[plane].mode_winctrl1 /* FRM,CCO,PO,PIPE */
-		) ;
-
-	au1200_setlocation(fbdev, plane, win->w[plane].xpos, win->w[plane].ypos);
-
-	lcd->window[plane].winctrl2 = ( 0
-		| LCD_WINCTRL2_CKMODE_00
-		| LCD_WINCTRL2_DBM
-		| LCD_WINCTRL2_BX_N( fbdev->fb_info.fix.line_length)
-		| LCD_WINCTRL2_SCX_1
-		| LCD_WINCTRL2_SCY_1
-		) ;
-	lcd->winenable |= win->w[plane].mode_winenable;
-	au_sync();
-}
-
-
-/* Inline helpers */
-
-/*#define panel_is_dual(panel)  ((panel->mode_screen & LCD_SCREEN_PT) == LCD_SCREEN_PT_010)*/
-/*#define panel_is_active(panel)((panel->mode_screen & LCD_SCREEN_PT) == LCD_SCREEN_PT_010)*/
-
-#define panel_is_color(panel) ((panel->mode_screen & LCD_SCREEN_PT) <= LCD_SCREEN_PT_CDSTN)
-
-/* Bitfields format supported by the controller. */
-static struct fb_bitfield rgb_bitfields[][4] = {
-  	/*     Red, 	   Green, 	 Blue, 	     Transp   */
-	[LCD_WINCTRL1_FRM_16BPP655 >> 25] =
-		{ { 10, 6, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPP565 >> 25] =
-		{ { 11, 5, 0 }, { 5, 6, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPP556 >> 25] =
-		{ { 11, 5, 0 }, { 6, 5, 0 }, { 0, 6, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPPI1555 >> 25] =
-		{ { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPPI5551 >> 25] =
-		{ { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPPA1555 >> 25] =
-		{ { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 15, 1, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPPA5551 >> 25] =
-		{ { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 1, 0 } },
-
-	[LCD_WINCTRL1_FRM_24BPP >> 25] =
-		{ { 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_32BPP >> 25] =
-		{ { 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 24, 0, 0 } },
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* Helpers */
-
-static void au1200fb_update_fbinfo(struct fb_info *fbi)
-{
-	/* FIX!!!! This also needs to take the window pixel format into account!!! */
-
-	/* Update var-dependent FB info */
-	if (panel_is_color(panel)) {
-		if (fbi->var.bits_per_pixel <= 8) {
-			/* palettized */
-			fbi->fix.visual = FB_VISUAL_PSEUDOCOLOR;
-			fbi->fix.line_length = fbi->var.xres_virtual /
-				(8/fbi->var.bits_per_pixel);
-		} else {
-			/* non-palettized */
-			fbi->fix.visual = FB_VISUAL_TRUECOLOR;
-			fbi->fix.line_length = fbi->var.xres_virtual * (fbi->var.bits_per_pixel / 8);
-		}
-	} else {
-		/* mono FIX!!! mono 8 and 4 bits */
-		fbi->fix.visual = FB_VISUAL_MONO10;
-		fbi->fix.line_length = fbi->var.xres_virtual / 8;
-	}
-
-	fbi->screen_size = fbi->fix.line_length * fbi->var.yres_virtual;
-	print_dbg("line length: %d\n", fbi->fix.line_length);
-	print_dbg("bits_per_pixel: %d\n", fbi->var.bits_per_pixel);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* AU1200 framebuffer driver */
-
-/* fb_check_var
- * Validate var settings with hardware restrictions and modify it if necessary
- */
-static int au1200fb_fb_check_var(struct fb_var_screeninfo *var,
-	struct fb_info *fbi)
-{
-	struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
-	u32 pixclock;
-	int screen_size, plane;
-
-	plane = fbdev->plane;
-
-	/* Make sure that the mode respect all LCD controller and
-	 * panel restrictions. */
-	var->xres = win->w[plane].xres;
-	var->yres = win->w[plane].yres;
-
-	/* No need for virtual resolution support */
-	var->xres_virtual = var->xres;
-	var->yres_virtual = var->yres;
-
-	var->bits_per_pixel = winbpp(win->w[plane].mode_winctrl1);
-
-	screen_size = var->xres_virtual * var->yres_virtual;
-	if (var->bits_per_pixel > 8) screen_size *= (var->bits_per_pixel / 8);
-	else screen_size /= (8/var->bits_per_pixel);
-
-	if (fbdev->fb_len < screen_size)
-		return -EINVAL; /* Virtual screen is to big, abort */
-
-	/* FIX!!!! what are the implicaitons of ignoring this for windows ??? */
-	/* The max LCD clock is fixed to 48MHz (value of AUX_CLK). The pixel
-	 * clock can only be obtain by dividing this value by an even integer.
-	 * Fallback to a slower pixel clock if necessary. */
-	pixclock = max((u32)(PICOS2KHZ(var->pixclock) * 1000), fbi->monspecs.dclkmin);
-	pixclock = min(pixclock, min(fbi->monspecs.dclkmax, (u32)AU1200_LCD_MAX_CLK/2));
-
-	if (AU1200_LCD_MAX_CLK % pixclock) {
-		int diff = AU1200_LCD_MAX_CLK % pixclock;
-		pixclock -= diff;
-	}
-
-	var->pixclock = KHZ2PICOS(pixclock/1000);
-#if 0
-	if (!panel_is_active(panel)) {
-		int pcd = AU1200_LCD_MAX_CLK / (pixclock * 2) - 1;
-
-		if (!panel_is_color(panel)
-			&& (panel->control_base & LCD_CONTROL_MPI) && (pcd < 3)) {
-			/* STN 8bit mono panel support is up to 6MHz pixclock */
-			var->pixclock = KHZ2PICOS(6000);
-		} else if (!pcd) {
-			/* Other STN panel support is up to 12MHz  */
-			var->pixclock = KHZ2PICOS(12000);
-		}
-	}
-#endif
-	/* Set bitfield accordingly */
-	switch (var->bits_per_pixel) {
-		case 16:
-		{
-			/* 16bpp True color.
-			 * These must be set to MATCH WINCTRL[FORM] */
-			int idx;
-			idx = (win->w[0].mode_winctrl1 & LCD_WINCTRL1_FRM) >> 25;
-			var->red    = rgb_bitfields[idx][0];
-			var->green  = rgb_bitfields[idx][1];
-			var->blue   = rgb_bitfields[idx][2];
-			var->transp = rgb_bitfields[idx][3];
-			break;
-		}
-
-		case 32:
-		{
-			/* 32bpp True color.
-			 * These must be set to MATCH WINCTRL[FORM] */
-			int idx;
-			idx = (win->w[0].mode_winctrl1 & LCD_WINCTRL1_FRM) >> 25;
-			var->red    = rgb_bitfields[idx][0];
-			var->green  = rgb_bitfields[idx][1];
-			var->blue   = rgb_bitfields[idx][2];
-			var->transp = rgb_bitfields[idx][3];
-			break;
-		}
-		default:
-			print_dbg("Unsupported depth %dbpp", var->bits_per_pixel);
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* fb_set_par
- * Set hardware with var settings. This will enable the controller with a
- * specific mode, normally validated with the fb_check_var method
- */
-static int au1200fb_fb_set_par(struct fb_info *fbi)
-{
-	struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
-
-	au1200fb_update_fbinfo(fbi);
-	au1200_setmode(fbdev);
-
-	return 0;
-}
-
-/* fb_setcolreg
- * Set color in LCD palette.
- */
-static int au1200fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green,
-	unsigned blue, unsigned transp, struct fb_info *fbi)
-{
-	volatile u32 *palette = lcd->palette;
-	u32 value;
-
-	if (regno > (AU1200_LCD_NBR_PALETTE_ENTRIES - 1))
-		return -EINVAL;
-
-	if (fbi->var.grayscale) {
-		/* Convert color to grayscale */
-		red = green = blue =
-			(19595 * red + 38470 * green + 7471 * blue) >> 16;
-	}
-
-	if (fbi->fix.visual == FB_VISUAL_TRUECOLOR) {
-		/* Place color in the pseudopalette */
-		if (regno > 16)
-			return -EINVAL;
-
-		palette = (u32*) fbi->pseudo_palette;
-
-		red   >>= (16 - fbi->var.red.length);
-		green >>= (16 - fbi->var.green.length);
-		blue  >>= (16 - fbi->var.blue.length);
-
-		value = (red   << fbi->var.red.offset) 	|
-			(green << fbi->var.green.offset)|
-			(blue  << fbi->var.blue.offset);
-		value &= 0xFFFF;
-
-	} else if (1 /*FIX!!! panel_is_active(fbdev->panel)*/) {
-		/* COLOR TFT PALLETTIZED (use RGB 565) */
-		value = (red & 0xF800)|((green >> 5) &
-				0x07E0)|((blue >> 11) & 0x001F);
-		value &= 0xFFFF;
-
-	} else if (0 /*panel_is_color(fbdev->panel)*/) {
-		/* COLOR STN MODE */
-		value = 0x1234;
-		value &= 0xFFF;
-	} else {
-		/* MONOCHROME MODE */
-		value = (green >> 12) & 0x000F;
-		value &= 0xF;
-	}
-
-	palette[regno] = value;
-
-	return 0;
-}
-
-/* fb_blank
- * Blank the screen. Depending on the mode, the screen will be
- * activated with the backlight color, or desactivated
- */
-static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi)
-{
-	/* Short-circuit screen blanking */
-	if (noblanking)
-		return 0;
-
-	switch (blank_mode) {
-
-	case FB_BLANK_UNBLANK:
-	case FB_BLANK_NORMAL:
-		/* printk("turn on panel\n"); */
-		au1200_setpanel(panel);
-		break;
-	case FB_BLANK_VSYNC_SUSPEND:
-	case FB_BLANK_HSYNC_SUSPEND:
-	case FB_BLANK_POWERDOWN:
-		/* printk("turn off panel\n"); */
-		au1200_setpanel(NULL);
-		break;
-	default:
-		break;
-
-	}
-
-	/* FB_BLANK_NORMAL is a soft blank */
-	return (blank_mode == FB_BLANK_NORMAL) ? -EINVAL : 0;
-}
-
-/* fb_mmap
- * Map video memory in user space. We don't use the generic fb_mmap
- * method mainly to allow the use of the TLB streaming flag (CCA=6)
- */
-static int au1200fb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-
-{
-	unsigned int len;
-	unsigned long start=0, off;
-	struct au1200fb_device *fbdev = (struct au1200fb_device *) info;
-
-#ifdef CONFIG_PM
-	au1xxx_pm_access(LCD_pm_dev);
-#endif
-
-	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
-		return -EINVAL;
-	}
-
-	start = fbdev->fb_phys & PAGE_MASK;
-	len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len);
-
-	off = vma->vm_pgoff << PAGE_SHIFT;
-
-	if ((vma->vm_end - vma->vm_start + off) > len) {
-		return -EINVAL;
-	}
-
-	off += start;
-	vma->vm_pgoff = off >> PAGE_SHIFT;
-
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	pgprot_val(vma->vm_page_prot) |= _CACHE_MASK; /* CCA=7 */
-
-	vma->vm_flags |= VM_IO;
-
-	return io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-				  vma->vm_end - vma->vm_start,
-				  vma->vm_page_prot);
-
-	return 0;
-}
-
-static void set_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata)
-{
-
-	unsigned int hi1, divider;
-
-	/* SCREEN_SIZE: user cannot reset size, must switch panel choice */
-
-	if (pdata->flags & SCREEN_BACKCOLOR)
-		lcd->backcolor = pdata->backcolor;
-
-	if (pdata->flags & SCREEN_BRIGHTNESS) {
-
-		// limit brightness pwm duty to >= 30/1600
-		if (pdata->brightness < 30) {
-			pdata->brightness = 30;
-		}
-		divider = (lcd->pwmdiv & 0x3FFFF) + 1;
-		hi1 = (lcd->pwmhi >> 16) + 1;
-		hi1 = (((pdata->brightness & 0xFF)+1) * divider >> 8);
-		lcd->pwmhi &= 0xFFFF;
-		lcd->pwmhi |= (hi1 << 16);
-	}
-
-	if (pdata->flags & SCREEN_COLORKEY)
-		lcd->colorkey = pdata->colorkey;
-
-	if (pdata->flags & SCREEN_MASK)
-		lcd->colorkeymsk = pdata->mask;
-	au_sync();
-}
-
-static void get_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata)
-{
-	unsigned int hi1, divider;
-
-	pdata->xsize = ((lcd->screen & LCD_SCREEN_SX) >> 19) + 1;
-	pdata->ysize = ((lcd->screen & LCD_SCREEN_SY) >> 8) + 1;
-
-	pdata->backcolor = lcd->backcolor;
-	pdata->colorkey = lcd->colorkey;
-	pdata->mask = lcd->colorkeymsk;
-
-	// brightness
-	hi1 = (lcd->pwmhi >> 16) + 1;
-	divider = (lcd->pwmdiv & 0x3FFFF) + 1;
-	pdata->brightness = ((hi1 << 8) / divider) - 1;
-	au_sync();
-}
-
-static void set_window(unsigned int plane,
-	struct au1200_lcd_window_regs_t *pdata)
-{
-	unsigned int val, bpp;
-
-	/* Window control register 0 */
-	if (pdata->flags & WIN_POSITION) {
-		val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_OX |
-				LCD_WINCTRL0_OY);
-		val |= ((pdata->xpos << 21) & LCD_WINCTRL0_OX);
-		val |= ((pdata->ypos << 10) & LCD_WINCTRL0_OY);
-		lcd->window[plane].winctrl0 = val;
-	}
-	if (pdata->flags & WIN_ALPHA_COLOR) {
-		val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_A);
-		val |= ((pdata->alpha_color << 2) & LCD_WINCTRL0_A);
-		lcd->window[plane].winctrl0 = val;
-	}
-	if (pdata->flags & WIN_ALPHA_MODE) {
-		val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_AEN);
-		val |= ((pdata->alpha_mode << 1) & LCD_WINCTRL0_AEN);
-		lcd->window[plane].winctrl0 = val;
-	}
-
-	/* Window control register 1 */
-	if (pdata->flags & WIN_PRIORITY) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PRI);
-		val |= ((pdata->priority << 30) & LCD_WINCTRL1_PRI);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_CHANNEL) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PIPE);
-		val |= ((pdata->channel << 29) & LCD_WINCTRL1_PIPE);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_BUFFER_FORMAT) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_FRM);
-		val |= ((pdata->buffer_format << 25) & LCD_WINCTRL1_FRM);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_COLOR_ORDER) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_CCO);
-		val |= ((pdata->color_order << 24) & LCD_WINCTRL1_CCO);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_PIXEL_ORDER) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PO);
-		val |= ((pdata->pixel_order << 22) & LCD_WINCTRL1_PO);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_SIZE) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_SZX |
-				LCD_WINCTRL1_SZY);
-		val |= (((pdata->xsize << 11) - 1) & LCD_WINCTRL1_SZX);
-		val |= (((pdata->ysize) - 1) & LCD_WINCTRL1_SZY);
-		lcd->window[plane].winctrl1 = val;
-		/* program buffer line width */
-		bpp = winbpp(val) / 8;
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_BX);
-		val |= (((pdata->xsize * bpp) << 8) & LCD_WINCTRL2_BX);
-		lcd->window[plane].winctrl2 = val;
-	}
-
-	/* Window control register 2 */
-	if (pdata->flags & WIN_COLORKEY_MODE) {
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_CKMODE);
-		val |= ((pdata->colorkey_mode << 24) & LCD_WINCTRL2_CKMODE);
-		lcd->window[plane].winctrl2 = val;
-	}
-	if (pdata->flags & WIN_DOUBLE_BUFFER_MODE) {
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_DBM);
-		val |= ((pdata->double_buffer_mode << 23) & LCD_WINCTRL2_DBM);
-		lcd->window[plane].winctrl2 = val;
-	}
-	if (pdata->flags & WIN_RAM_ARRAY_MODE) {
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_RAM);
-		val |= ((pdata->ram_array_mode << 21) & LCD_WINCTRL2_RAM);
-		lcd->window[plane].winctrl2 = val;
-	}
-
-	/* Buffer line width programmed with WIN_SIZE */
-
-	if (pdata->flags & WIN_BUFFER_SCALE) {
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_SCX |
-				LCD_WINCTRL2_SCY);
-		val |= ((pdata->xsize << 11) & LCD_WINCTRL2_SCX);
-		val |= ((pdata->ysize) & LCD_WINCTRL2_SCY);
-		lcd->window[plane].winctrl2 = val;
-	}
-
-	if (pdata->flags & WIN_ENABLE) {
-		val = lcd->winenable;
-		val &= ~(1<<plane);
-		val |= (pdata->enable & 1) << plane;
-		lcd->winenable = val;
-	}
-	au_sync();
-}
-
-static void get_window(unsigned int plane,
-	struct au1200_lcd_window_regs_t *pdata)
-{
-	/* Window control register 0 */
-	pdata->xpos = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_OX) >> 21;
-	pdata->ypos = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_OY) >> 10;
-	pdata->alpha_color = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_A) >> 2;
-	pdata->alpha_mode = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_AEN) >> 1;
-
-	/* Window control register 1 */
-	pdata->priority = (lcd->window[plane].winctrl1& LCD_WINCTRL1_PRI) >> 30;
-	pdata->channel = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_PIPE) >> 29;
-	pdata->buffer_format = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_FRM) >> 25;
-	pdata->color_order = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_CCO) >> 24;
-	pdata->pixel_order = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_PO) >> 22;
-	pdata->xsize = ((lcd->window[plane].winctrl1 & LCD_WINCTRL1_SZX) >> 11) + 1;
-	pdata->ysize = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_SZY) + 1;
-
-	/* Window control register 2 */
-	pdata->colorkey_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_CKMODE) >> 24;
-	pdata->double_buffer_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_DBM) >> 23;
-	pdata->ram_array_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_RAM) >> 21;
-
-	pdata->enable = (lcd->winenable >> plane) & 1;
-	au_sync();
-}
-
-static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd,
-                          unsigned long arg)
-{
-	int plane;
-	int val;
-
-#ifdef CONFIG_PM
-	au1xxx_pm_access(LCD_pm_dev);
-#endif
-
-	plane = fbinfo2index(info);
-	print_dbg("au1200fb: ioctl %d on plane %d\n", cmd, plane);
-
-	if (cmd == AU1200_LCD_FB_IOCTL) {
-		struct au1200_lcd_iodata_t iodata;
-
-		if (copy_from_user(&iodata, (void __user *) arg, sizeof(iodata)))
-			return -EFAULT;
-
-		print_dbg("FB IOCTL called\n");
-
-		switch (iodata.subcmd) {
-		case AU1200_LCD_SET_SCREEN:
-			print_dbg("AU1200_LCD_SET_SCREEN\n");
-			set_global(cmd, &iodata.global);
-			break;
-
-		case AU1200_LCD_GET_SCREEN:
-			print_dbg("AU1200_LCD_GET_SCREEN\n");
-			get_global(cmd, &iodata.global);
-			break;
-
-		case AU1200_LCD_SET_WINDOW:
-			print_dbg("AU1200_LCD_SET_WINDOW\n");
-			set_window(plane, &iodata.window);
-			break;
-
-		case AU1200_LCD_GET_WINDOW:
-			print_dbg("AU1200_LCD_GET_WINDOW\n");
-			get_window(plane, &iodata.window);
-			break;
-
-		case AU1200_LCD_SET_PANEL:
-			print_dbg("AU1200_LCD_SET_PANEL\n");
-			if ((iodata.global.panel_choice >= 0) &&
-					(iodata.global.panel_choice <
-					 NUM_PANELS))
-			{
-				struct panel_settings *newpanel;
-				panel_index = iodata.global.panel_choice;
-				newpanel = &known_lcd_panels[panel_index];
-				au1200_setpanel(newpanel);
-			}
-			break;
-
-		case AU1200_LCD_GET_PANEL:
-			print_dbg("AU1200_LCD_GET_PANEL\n");
-			iodata.global.panel_choice = panel_index;
-			break;
-
-		default:
-			return -EINVAL;
-		}
-
-		val = copy_to_user((void __user *) arg, &iodata, sizeof(iodata));
-		if (val) {
-			print_dbg("error: could not copy %d bytes\n", val);
-			return -EFAULT;
-		}
-	}
-
-	return 0;
-}
-
-
-static struct fb_ops au1200fb_fb_ops = {
-	.owner		= THIS_MODULE,
-	.fb_check_var	= au1200fb_fb_check_var,
-	.fb_set_par	= au1200fb_fb_set_par,
-	.fb_setcolreg	= au1200fb_fb_setcolreg,
-	.fb_blank	= au1200fb_fb_blank,
-	.fb_fillrect	= cfb_fillrect,
-	.fb_copyarea	= cfb_copyarea,
-	.fb_imageblit	= cfb_imageblit,
-	.fb_sync	= NULL,
-	.fb_ioctl	= au1200fb_ioctl,
-	.fb_mmap	= au1200fb_fb_mmap,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static irqreturn_t au1200fb_handle_irq(int irq, void* dev_id, struct pt_regs *regs)
-{
-	/* Nothing to do for now, just clear any pending interrupt */
-	lcd->intstatus = lcd->intstatus;
-	au_sync();
-
-	return IRQ_HANDLED;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* AU1200 LCD device probe helpers */
-
-static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev)
-{
-	struct fb_info *fbi = &fbdev->fb_info;
-	int bpp;
-
-	memset(fbi, 0, sizeof(struct fb_info));
-	fbi->fbops = &au1200fb_fb_ops;
-
-	bpp = winbpp(win->w[fbdev->plane].mode_winctrl1);
-
-	/* Copy monitor specs from panel data */
-	/* fixme: we're setting up LCD controller windows, so these dont give a
-	damn as to what the monitor specs are (the panel itself does, but that
-	isnt done here...so maybe need a generic catchall monitor setting??? */
-	memcpy(&fbi->monspecs, &panel->monspecs, sizeof(struct fb_monspecs));
-
-	/* We first try the user mode passed in argument. If that failed,
-	 * or if no one has been specified, we default to the first mode of the
-	 * panel list. Note that after this call, var data will be set */
-	if (!fb_find_mode(&fbi->var,
-			  fbi,
-			  NULL, /* drv_info.opt_mode, */
-			  fbi->monspecs.modedb,
-			  fbi->monspecs.modedb_len,
-			  fbi->monspecs.modedb,
-			  bpp)) {
-
-		print_err("Cannot find valid mode for panel %s", panel->name);
-		return -EFAULT;
-	}
-
-	fbi->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
-	if (!fbi->pseudo_palette) {
-		return -ENOMEM;
-	}
-	memset(fbi->pseudo_palette, 0, sizeof(u32) * 16);
-
-	if (fb_alloc_cmap(&fbi->cmap, AU1200_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
-		print_err("Fail to allocate colormap (%d entries)",
-			   AU1200_LCD_NBR_PALETTE_ENTRIES);
-		kfree(fbi->pseudo_palette);
-		return -EFAULT;
-	}
-
-	strncpy(fbi->fix.id, "AU1200", sizeof(fbi->fix.id));
-	fbi->fix.smem_start = fbdev->fb_phys;
-	fbi->fix.smem_len = fbdev->fb_len;
-	fbi->fix.type = FB_TYPE_PACKED_PIXELS;
-	fbi->fix.xpanstep = 0;
-	fbi->fix.ypanstep = 0;
-	fbi->fix.mmio_start = 0;
-	fbi->fix.mmio_len = 0;
-	fbi->fix.accel = FB_ACCEL_NONE;
-
-	fbi->screen_base = (char __iomem *) fbdev->fb_mem;
-
-	au1200fb_update_fbinfo(fbi);
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* AU1200 LCD controller device driver */
-
-static int au1200fb_drv_probe(struct device *dev)
-{
-	struct au1200fb_device *fbdev;
-	unsigned long page;
-	int bpp, plane, ret;
-
-	if (!dev)
-		return -EINVAL;
-
-	for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) {
-		bpp = winbpp(win->w[plane].mode_winctrl1);
-		if (win->w[plane].xres == 0)
-			win->w[plane].xres = panel->Xres;
-		if (win->w[plane].yres == 0)
-			win->w[plane].yres = panel->Yres;
-
-		fbdev = &_au1200fb_devices[plane];
-		memset(fbdev, 0, sizeof(struct au1200fb_device));
-		fbdev->plane = plane;
-
-		/* Allocate the framebuffer to the maximum screen size */
-		fbdev->fb_len = (win->w[plane].xres * win->w[plane].yres * bpp) / 8;
-
-		fbdev->fb_mem = dma_alloc_noncoherent(dev,
-				PAGE_ALIGN(fbdev->fb_len),
-				&fbdev->fb_phys, GFP_KERNEL);
-		if (!fbdev->fb_mem) {
-			print_err("fail to allocate frambuffer (size: %dK))",
-				  fbdev->fb_len / 1024);
-			return -ENOMEM;
-		}
-
-		/*
-		 * Set page reserved so that mmap will work. This is necessary
-		 * since we'll be remapping normal memory.
-		 */
-		for (page = (unsigned long)fbdev->fb_phys;
-		     page < PAGE_ALIGN((unsigned long)fbdev->fb_phys +
-			     fbdev->fb_len);
-		     page += PAGE_SIZE) {
-			SetPageReserved(pfn_to_page(page >> PAGE_SHIFT)); /* LCD DMA is NOT coherent on Au1200 */
-		}
-		print_dbg("Framebuffer memory map at %p", fbdev->fb_mem);
-		print_dbg("phys=0x%08x, size=%dK", fbdev->fb_phys, fbdev->fb_len / 1024);
-
-		/* Init FB data */
-		if ((ret = au1200fb_init_fbinfo(fbdev)) < 0)
-			goto failed;
-
-		/* Register new framebuffer */
-		if ((ret = register_framebuffer(&fbdev->fb_info)) < 0) {
-			print_err("cannot register new framebuffer");
-			goto failed;
-		}
-
-		au1200fb_fb_set_par(&fbdev->fb_info);
-
-#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
-		if (plane == 0)
-			if (fb_prepare_logo(&fbdev->fb_info, FB_ROTATE_UR)) {
-				/* Start display and show logo on boot */
-				fb_set_cmap(&fbdev->fb_info.cmap,
-						&fbdev->fb_info);
-
-				fb_show_logo(&fbdev->fb_info, FB_ROTATE_UR);
-			}
-#endif
-	}
-
-	/* Now hook interrupt too */
-	if ((ret = request_irq(AU1200_LCD_INT, au1200fb_handle_irq,
-		 	  SA_INTERRUPT | SA_SHIRQ, "lcd", (void *)dev)) < 0) {
-		print_err("fail to request interrupt line %d (err: %d)",
-			  AU1200_LCD_INT, ret);
-		goto failed;
-	}
-
-	return 0;
-
-failed:
-	/* NOTE: This only does the current plane/window that failed; others are still active */
-	if (fbdev->fb_mem)
-		dma_free_noncoherent(dev, PAGE_ALIGN(fbdev->fb_len),
-				fbdev->fb_mem, fbdev->fb_phys);
-	if (fbdev->fb_info.cmap.len != 0)
-		fb_dealloc_cmap(&fbdev->fb_info.cmap);
-	if (fbdev->fb_info.pseudo_palette)
-		kfree(fbdev->fb_info.pseudo_palette);
-	if (plane == 0)
-		free_irq(AU1200_LCD_INT, (void*)dev);
-	return ret;
-}
-
-static int au1200fb_drv_remove(struct device *dev)
-{
-	struct au1200fb_device *fbdev;
-	int plane;
-
-	if (!dev)
-		return -ENODEV;
-
-	/* Turn off the panel */
-	au1200_setpanel(NULL);
-
-	for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane)
-	{
-		fbdev = &_au1200fb_devices[plane];
-
-		/* Clean up all probe data */
-		unregister_framebuffer(&fbdev->fb_info);
-		if (fbdev->fb_mem)
-			dma_free_noncoherent(dev, PAGE_ALIGN(fbdev->fb_len),
-					fbdev->fb_mem, fbdev->fb_phys);
-		if (fbdev->fb_info.cmap.len != 0)
-			fb_dealloc_cmap(&fbdev->fb_info.cmap);
-		if (fbdev->fb_info.pseudo_palette)
-			kfree(fbdev->fb_info.pseudo_palette);
-	}
-
-	free_irq(AU1200_LCD_INT, (void *)dev);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int au1200fb_drv_suspend(struct device *dev, u32 state, u32 level)
-{
-	/* TODO */
-	return 0;
-}
-
-static int au1200fb_drv_resume(struct device *dev, u32 level)
-{
-	/* TODO */
-	return 0;
-}
-#endif /* CONFIG_PM */
-
-static struct device_driver au1200fb_driver = {
-	.name		= "au1200-lcd",
-	.bus		= &platform_bus_type,
-	.probe		= au1200fb_drv_probe,
-	.remove		= au1200fb_drv_remove,
-#ifdef CONFIG_PM
-	.suspend	= au1200fb_drv_suspend,
-	.resume		= au1200fb_drv_resume,
-#endif
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* Kernel driver */
-
-static void au1200fb_setup(void)
-{
-	char* options = NULL;
-	char* this_opt;
-	int num_panels = ARRAY_SIZE(known_lcd_panels);
-	int panel_idx = -1;
-
-	fb_get_options(DRIVER_NAME, &options);
-
-	if (options) {
-		while ((this_opt = strsep(&options,",")) != NULL) {
-			/* Panel option - can be panel name,
-			 * "bs" for board-switch, or number/index */
-			if (!strncmp(this_opt, "panel:", 6)) {
-				int i;
-				long int li;
-				char *endptr;
-				this_opt += 6;
-				/* First check for index, which allows
-				 * to short circuit this mess */
-				li = simple_strtol(this_opt, &endptr, 0);
-				if (*endptr == '\0') {
-					panel_idx = (int)li;
-				}
-				else if (strcmp(this_opt, "bs") == 0) {
-					extern int board_au1200fb_panel(void);
-					panel_idx = board_au1200fb_panel();
-				}
-
-				else
-				for (i = 0; i < num_panels; i++) {
-					if (!strcmp(this_opt, known_lcd_panels[i].name)) {
-						panel_idx = i;
-						break;
-					}
-				}
-
-				if ((panel_idx < 0) || (panel_idx >= num_panels)) {
-						print_warn("Panel %s not supported!", this_opt);
-				}
-				else
-					panel_index = panel_idx;
-			}
-
-			else if (strncmp(this_opt, "nohwcursor", 10) == 0) {
-				nohwcursor = 1;
-			}
-
-			/* Unsupported option */
-			else {
-				print_warn("Unsupported option \"%s\"", this_opt);
-			}
-		}
-	}
-}
-
-#ifdef CONFIG_PM
-static int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
-		au1xxx_request_t request, void *data) {
-	int retval = -1;
-	unsigned int d = 0;
-	unsigned int brightness = 0;
-
-	if (request == AU1XXX_PM_SLEEP) {
-		board_au1200fb_panel_shutdown();
-	}
-	else if (request == AU1XXX_PM_WAKEUP) {
-		if(dev->prev_state == SLEEP_STATE)
-		{
-			int plane;
-			au1200_setpanel(panel);
-			for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) 	{
-				struct au1200fb_device *fbdev;
-				fbdev = &_au1200fb_devices[plane];
-				au1200fb_fb_set_par(&fbdev->fb_info);
-			}
-		}
-
-		d = *((unsigned int*)data);
-		if(d <=10) brightness = 26;
-		else if(d<=20) brightness = 51;
-		else if(d<=30) brightness = 77;
-		else if(d<=40) brightness = 102;
-		else if(d<=50) brightness = 128;
-		else if(d<=60) brightness = 153;
-		else if(d<=70) brightness = 179;
-		else if(d<=80) brightness = 204;
-		else if(d<=90) brightness = 230;
-		else brightness = 255;
-		set_brightness(brightness);
-	} else if (request == AU1XXX_PM_GETSTATUS) {
-		return dev->cur_state;
-	} else if (request == AU1XXX_PM_ACCESS) {
-		if (dev->cur_state != SLEEP_STATE)
-			return retval;
-		else {
-			au1200_setpanel(panel);
-		}
-	} else if (request == AU1XXX_PM_IDLE) {
-	} else if (request == AU1XXX_PM_CLEANUP) {
-	}
-
-	return retval;
-}
-#endif
-
-static int __init au1200fb_init(void)
-{
-	print_info("" DRIVER_DESC "");
-
-	/* Setup driver with options */
-	au1200fb_setup();
-
-	/* Point to the panel selected */
-	panel = &known_lcd_panels[panel_index];
-	win = &windows[window_index];
-
-	printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name);
-	printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name);
-
-	/* Kickstart the panel, the framebuffers/windows come soon enough */
-	au1200_setpanel(panel);
-
-	#ifdef CONFIG_PM
-	LCD_pm_dev = new_au1xxx_power_device("LCD", &au1200fb_pm_callback, NULL);
-	if ( LCD_pm_dev == NULL)
-		printk(KERN_INFO "Unable to create a power management device entry for the au1200fb.\n");
-	else
-		printk(KERN_INFO "Power management device entry for the au1200fb loaded.\n");
-	#endif
-
-	return driver_register(&au1200fb_driver);
-}
-
-static void __exit au1200fb_cleanup(void)
-{
-	driver_unregister(&au1200fb_driver);
-}
-
-module_init(au1200fb_init);
-module_exit(au1200fb_cleanup);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");