Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

118 files changed, 7730 insertions, 9142 deletions

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 85f8bf4112c..56dd6650c97 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -16,118 +16,9 @@ menuconfig WLAN
 
 if WLAN
 
-menuconfig WLAN_PRE80211
-	bool "Wireless LAN (pre-802.11)"
-	depends on NETDEVICES
-	---help---
-	  Say Y if you have any pre-802.11 wireless LAN hardware.
-
-	  This option does not affect the kernel build, it only
-	  lets you choose drivers.
-
-config STRIP
-	tristate "STRIP (Metricom starmode radio IP)"
-	depends on INET && WLAN_PRE80211
-	select WIRELESS_EXT
-	---help---
-	  Say Y if you have a Metricom radio and intend to use Starmode Radio
-	  IP. STRIP is a radio protocol developed for the MosquitoNet project
-	  to send Internet traffic using Metricom radios.  Metricom radios are
-	  small, battery powered, 100kbit/sec packet radio transceivers, about
-	  the size and weight of a cellular telephone. (You may also have heard
-	  them called "Metricom modems" but we avoid the term "modem" because
-	  it misleads many people into thinking that you can plug a Metricom
-	  modem into a phone line and use it as a modem.)
-
-	  You can use STRIP on any Linux machine with a serial port, although
-	  it is obviously most useful for people with laptop computers. If you
-	  think you might get a Metricom radio in the future, there is no harm
-	  in saying Y to STRIP now, except that it makes the kernel a bit
-	  bigger.
-
-	  To compile this as a module, choose M here: the module will be
-	  called strip.
-
-config ARLAN
-	tristate "Aironet Arlan 655 & IC2200 DS support"
-	depends on ISA && !64BIT && WLAN_PRE80211
-	select WIRELESS_EXT
-	---help---
-	  Aironet makes Arlan, a class of wireless LAN adapters. These use the
-	  www.Telxon.com chip, which is also used on several similar cards.
-	  This driver is tested on the 655 and IC2200 series cards. Look at
-	  <http://www.ylenurme.ee/~elmer/655/> for the latest information.
-
-	  The driver is built as two modules, arlan and arlan-proc. The latter
-	  is the /proc interface and is not needed most of time.
-
-	  On some computers the card ends up in non-valid state after some
-	  time. Use a ping-reset script to clear it.
-
-config WAVELAN
-	tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
-	depends on ISA && WLAN_PRE80211
-	select WIRELESS_EXT
-	select WEXT_SPY
-	select WEXT_PRIV
-	---help---
-	  The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
-	  a Radio LAN (wireless Ethernet-like Local Area Network) using the
-	  radio frequencies 900 MHz and 2.4 GHz.
-
-	  If you want to use an ISA WaveLAN card under Linux, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. Some more specific
-	  information is contained in
-	  <file:Documentation/networking/wavelan.txt> and in the source code
-	  <file:drivers/net/wireless/wavelan.p.h>.
-
-	  You will also need the wireless tools package available from
-	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-	  Please read the man pages contained therein.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called wavelan.
-
-config PCMCIA_WAVELAN
-	tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
-	depends on PCMCIA && WLAN_PRE80211
-	select WIRELESS_EXT
-	select WEXT_SPY
-	select WEXT_PRIV
-	help
-	  Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
-	  (PC-card) wireless Ethernet networking card to your computer.  This
-	  driver is for the non-IEEE-802.11 Wavelan cards.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called wavelan_cs.  If unsure, say N.
-
-config PCMCIA_NETWAVE
-	tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
-	depends on PCMCIA && WLAN_PRE80211
-	select WIRELESS_EXT
-	select WEXT_PRIV
-	help
-	  Say Y here if you intend to attach this type of PCMCIA (PC-card)
-	  wireless Ethernet networking card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called netwave_cs.  If unsure, say N.
-
-
-menuconfig WLAN_80211
-	bool "Wireless LAN (IEEE 802.11)"
-	depends on NETDEVICES
-	---help---
-	  Say Y if you have any 802.11 wireless LAN hardware.
-
-	  This option does not affect the kernel build, it only
-	  lets you choose drivers.
-
 config PCMCIA_RAYCS
 	tristate "Aviator/Raytheon 2.4GHz wireless support"
-	depends on PCMCIA && WLAN_80211
+	depends on PCMCIA
 	select WIRELESS_EXT
 	select WEXT_SPY
 	select WEXT_PRIV
@@ -142,7 +33,7 @@ config PCMCIA_RAYCS
 
 config LIBERTAS_THINFIRM
 	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
-	depends on WLAN_80211 && MAC80211
+	depends on MAC80211
 	select FW_LOADER
 	---help---
 	  A library for Marvell Libertas 8xxx devices using thinfirm.
@@ -155,7 +46,7 @@ config LIBERTAS_THINFIRM_USB
 
 config AIRO
 	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
-	depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
+	depends on ISA_DMA_API && (PCI || BROKEN)
 	select WIRELESS_EXT
 	select CRYPTO
 	select WEXT_SPY
@@ -175,7 +66,7 @@ config AIRO
 
 config ATMEL
       tristate "Atmel at76c50x chipset  802.11b support"
-      depends on (PCI || PCMCIA) && WLAN_80211
+      depends on (PCI || PCMCIA)
       select WIRELESS_EXT
       select WEXT_PRIV
       select FW_LOADER
@@ -210,7 +101,7 @@ config PCMCIA_ATMEL
 
 config AT76C50X_USB
         tristate "Atmel at76c503/at76c505/at76c505a USB cards"
-        depends on MAC80211 && WLAN_80211 && USB
+        depends on MAC80211 && USB
         select FW_LOADER
         ---help---
           Enable support for USB Wireless devices using Atmel at76c503,
@@ -218,8 +109,9 @@ config AT76C50X_USB
 
 config AIRO_CS
 	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
-	depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
+	depends on PCMCIA && (BROKEN || !M32R)
 	select WIRELESS_EXT
+	select WEXT_SPY
 	select CRYPTO
 	select CRYPTO_AES
 	---help---
@@ -238,7 +130,7 @@ config AIRO_CS
 
 config PCMCIA_WL3501
 	tristate "Planet WL3501 PCMCIA cards"
-	depends on EXPERIMENTAL && PCMCIA && WLAN_80211
+	depends on EXPERIMENTAL && PCMCIA
 	select WIRELESS_EXT
 	select WEXT_SPY
 	help
@@ -248,7 +140,7 @@ config PCMCIA_WL3501
 
 config PRISM54
 	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
-	depends on PCI && EXPERIMENTAL && WLAN_80211
+	depends on PCI && EXPERIMENTAL
 	select WIRELESS_EXT
 	select WEXT_SPY
 	select WEXT_PRIV
@@ -272,7 +164,7 @@ config PRISM54
 
 config USB_ZD1201
 	tristate "USB ZD1201 based Wireless device support"
-	depends on USB && WLAN_80211
+	depends on USB
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select FW_LOADER
@@ -291,7 +183,7 @@ config USB_ZD1201
 
 config USB_NET_RNDIS_WLAN
 	tristate "Wireless RNDIS USB support"
-	depends on USB && WLAN_80211 && EXPERIMENTAL
+	depends on USB && EXPERIMENTAL
 	depends on CFG80211
 	select USB_USBNET
 	select USB_NET_CDCETHER
@@ -319,7 +211,7 @@ config USB_NET_RNDIS_WLAN
 
 config RTL8180
 	tristate "Realtek 8180/8185 PCI support"
-	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+	depends on MAC80211 && PCI && EXPERIMENTAL
 	select EEPROM_93CX6
 	---help---
 	  This is a driver for RTL8180 and RTL8185 based cards.
@@ -375,7 +267,7 @@ config RTL8180
 
 config RTL8187
 	tristate "Realtek 8187 and 8187B USB support"
-	depends on MAC80211 && USB && WLAN_80211
+	depends on MAC80211 && USB
 	select EEPROM_93CX6
 	---help---
 	  This is a driver for RTL8187 and RTL8187B based cards.
@@ -404,7 +296,7 @@ config RTL8187_LEDS
 
 config ADM8211
 	tristate "ADMtek ADM8211 support"
-	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+	depends on MAC80211 && PCI && EXPERIMENTAL
 	select CRC32
 	select EEPROM_93CX6
 	---help---
@@ -431,7 +323,7 @@ config ADM8211
 
 config MAC80211_HWSIM
 	tristate "Simulated radio testing tool for mac80211"
-	depends on MAC80211 && WLAN_80211
+	depends on MAC80211
 	---help---
 	  This driver is a developer testing tool that can be used to test
 	  IEEE 802.11 networking stack (mac80211) functionality. This is not
@@ -444,7 +336,7 @@ config MAC80211_HWSIM
 
 config MWL8K
 	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
-	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+	depends on MAC80211 && PCI && EXPERIMENTAL
 	---help---
 	  This driver supports Marvell TOPDOG 802.11 wireless cards.
 
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 7a4647e78fd..5d4ce4d2b32 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -5,16 +5,6 @@
 obj-$(CONFIG_IPW2100) += ipw2x00/
 obj-$(CONFIG_IPW2200) += ipw2x00/
 
-obj-$(CONFIG_STRIP) += strip.o
-obj-$(CONFIG_ARLAN) += arlan.o 
-
-arlan-objs := arlan-main.o arlan-proc.o
-
-# Obsolete cards
-obj-$(CONFIG_WAVELAN)		+= wavelan.o
-obj-$(CONFIG_PCMCIA_NETWAVE)	+= netwave_cs.o
-obj-$(CONFIG_PCMCIA_WAVELAN)	+= wavelan_cs.o
-
 obj-$(CONFIG_HERMES)		+= orinoco/
 
 obj-$(CONFIG_AIRO)		+= airo.o
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index 6ce86cb3765..4e7a7fd695c 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -1,6 +1,5 @@
 menuconfig ATH_COMMON
 	tristate "Atheros Wireless Cards"
-	depends on WLAN_80211
 	depends on CFG80211
 	---help---
 	  This will enable the support for the Atheros wireless drivers.
diff --git a/drivers/net/wireless/ath/ar9170/Kconfig b/drivers/net/wireless/ath/ar9170/Kconfig
index 05918f1e685..d7a4799d20f 100644
--- a/drivers/net/wireless/ath/ar9170/Kconfig
+++ b/drivers/net/wireless/ath/ar9170/Kconfig
@@ -1,6 +1,6 @@
 config AR9170_USB
 	tristate "Atheros AR9170 802.11n USB support"
-	depends on USB && MAC80211 && WLAN_80211
+	depends on USB && MAC80211
 	select FW_LOADER
 	help
 	  This is a driver for the Atheros "otus" 802.11n USB devices.
diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index 06d006675d7..eb83b7b4d0e 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,6 +1,6 @@
 config ATH5K
 	tristate "Atheros 5xxx wireless cards support"
-	depends on PCI && MAC80211 && WLAN_80211
+	depends on PCI && MAC80211
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index b767c3b67b2..7ce98bd7c74 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -59,6 +59,8 @@ static const struct pci_device_id ath5k_led_devices[] = {
 	{ ATH_SDEVICE(PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID), ATH_LED(1, 1) },
 	/* Acer Aspire One A150 (maximlevitsky@gmail.com) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_FOXCONN, 0xe008), ATH_LED(3, 0) },
+	/* Acer Aspire One AO531h AO751h (keng-yu.lin@canonical.com) */
+	{ ATH_SDEVICE(PCI_VENDOR_ID_FOXCONN, 0xe00d), ATH_LED(3, 0) },
 	/* Acer Ferrari 5000 (russ.dill@gmail.com) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) },
 	/* E-machines E510 (tuliom@gmail.com) */
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 99ce066392a..b735fb399fb 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -3,7 +3,7 @@ config ATH9K_HW
 
 config ATH9K
 	tristate "Atheros 802.11n wireless cards support"
-	depends on PCI && MAC80211 && WLAN_80211
+	depends on PCI && MAC80211
 	select ATH9K_HW
 	select MAC80211_LEDS
 	select LEDS_CLASS
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 25531f231b6..329e6bc137a 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -69,6 +69,7 @@ static int ath_ahb_probe(struct platform_device *pdev)
 	int irq;
 	int ret = 0;
 	struct ath_hw *ah;
+	char hw_name[64];
 
 	if (!pdev->dev.platform_data) {
 		dev_err(&pdev->dev, "no platform data specified\n");
@@ -133,14 +134,11 @@ static int ath_ahb_probe(struct platform_device *pdev)
 	}
 
 	ah = sc->sc_ah;
+	ath9k_hw_name(ah, hw_name, sizeof(hw_name));
 	printk(KERN_INFO
-	       "%s: Atheros AR%s MAC/BB Rev:%x, "
-	       "AR%s RF Rev:%x, mem=0x%lx, irq=%d\n",
+	       "%s: %s mem=0x%lx, irq=%d\n",
 	       wiphy_name(hw->wiphy),
-	       ath_mac_bb_name(ah->hw_version.macVersion),
-	       ah->hw_version.macRev,
-	       ath_rf_name((ah->hw_version.analog5GhzRev & AR_RADIO_SREV_MAJOR)),
-	       ah->hw_version.phyRev,
+	       hw_name,
 	       (unsigned long)mem, irq);
 
 	return 0;
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 551f8801459..238a5744d8e 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -877,7 +877,7 @@ static void ath9k_hw_9271_pa_cal(struct ath_hw *ah, bool is_reset)
 	REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9271_AN_RF2G6_OFFS, 0);
 
 	/* find off_6_1; */
-	for (i = 6; i >= 0; i--) {
+	for (i = 6; i > 0; i--) {
 		regVal = REG_READ(ah, 0x7834);
 		regVal |= (1 << (20 + i));
 		REG_WRITE(ah, 0x7834, regVal);
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_4k.c b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
index 58167d861dc..68db16690ab 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
@@ -1112,6 +1112,10 @@ static void ath9k_hw_4k_set_board_values(struct ath_hw *ah,
 
 	REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON,
 		      pModal->txEndToRxOn);
+
+	if (AR_SREV_9271_10(ah))
+		REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON,
+			      pModal->txEndToRxOn);
 	REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62,
 		      pModal->thresh62);
 	REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0, AR_PHY_EXT_CCA0_THRESH62,
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index cab17c6c8a3..111ff049f75 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -30,8 +30,6 @@ static void ath9k_hw_set_regs(struct ath_hw *ah, struct ath9k_channel *chan);
 static u32 ath9k_hw_ini_fixup(struct ath_hw *ah,
 			      struct ar5416_eeprom_def *pEepData,
 			      u32 reg, u32 value);
-static void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan);
-static void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan);
 
 MODULE_AUTHOR("Atheros Communications");
 MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
@@ -454,21 +452,6 @@ static void ath9k_hw_init_defaults(struct ath_hw *ah)
 	ah->power_mode = ATH9K_PM_UNDEFINED;
 }
 
-static int ath9k_hw_rfattach(struct ath_hw *ah)
-{
-	bool rfStatus = false;
-	int ecode = 0;
-
-	rfStatus = ath9k_hw_init_rf(ah, &ecode);
-	if (!rfStatus) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
-			  "RF setup failed, status: %u\n", ecode);
-		return ecode;
-	}
-
-	return 0;
-}
-
 static int ath9k_hw_rf_claim(struct ath_hw *ah)
 {
 	u32 val;
@@ -585,9 +568,15 @@ static int ath9k_hw_post_init(struct ath_hw *ah)
 		  ah->eep_ops->get_eeprom_ver(ah),
 		  ah->eep_ops->get_eeprom_rev(ah));
 
-	ecode = ath9k_hw_rfattach(ah);
-	if (ecode != 0)
-		return ecode;
+        if (!AR_SREV_9280_10_OR_LATER(ah)) {
+		ecode = ath9k_hw_rf_alloc_ext_banks(ah);
+		if (ecode) {
+			ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+				  "Failed allocating banks for "
+				  "external radio\n");
+			return ecode;
+		}
+	}
 
 	if (!AR_SREV_9100(ah)) {
 		ath9k_hw_ani_setup(ah);
@@ -662,10 +651,13 @@ static void ath9k_hw_init_cal_settings(struct ath_hw *ah)
 static void ath9k_hw_init_mode_regs(struct ath_hw *ah)
 {
 	if (AR_SREV_9271(ah)) {
-		INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271_1_0,
-			       ARRAY_SIZE(ar9271Modes_9271_1_0), 6);
-		INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271_1_0,
-			       ARRAY_SIZE(ar9271Common_9271_1_0), 2);
+		INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271,
+			       ARRAY_SIZE(ar9271Modes_9271), 6);
+		INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271,
+			       ARRAY_SIZE(ar9271Common_9271), 2);
+		INIT_INI_ARRAY(&ah->iniModes_9271_1_0_only,
+			       ar9271Modes_9271_1_0_only,
+			       ARRAY_SIZE(ar9271Modes_9271_1_0_only), 6);
 		return;
 	}
 
@@ -957,8 +949,14 @@ int ath9k_hw_init(struct ath_hw *ah)
 	ath9k_hw_init_cal_settings(ah);
 
 	ah->ani_function = ATH9K_ANI_ALL;
-	if (AR_SREV_9280_10_OR_LATER(ah))
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
 		ah->ani_function &= ~ATH9K_ANI_NOISE_IMMUNITY_LEVEL;
+		ah->ath9k_hw_rf_set_freq = &ath9k_hw_ar9280_set_channel;
+		ah->ath9k_hw_spur_mitigate_freq = &ath9k_hw_9280_spur_mitigate;
+	} else {
+		ah->ath9k_hw_rf_set_freq = &ath9k_hw_set_channel;
+		ah->ath9k_hw_spur_mitigate_freq = &ath9k_hw_spur_mitigate;
+	}
 
 	ath9k_hw_init_mode_regs(ah);
 
@@ -1037,6 +1035,22 @@ static void ath9k_hw_init_qos(struct ath_hw *ah)
 	REG_WRITE(ah, AR_TXOP_12_15, 0xFFFFFFFF);
 }
 
+static void ath9k_hw_change_target_baud(struct ath_hw *ah, u32 freq, u32 baud)
+{
+	u32 lcr;
+	u32 baud_divider = freq * 1000 * 1000 / 16 / baud;
+
+	lcr = REG_READ(ah , 0x5100c);
+	lcr |= 0x80;
+
+	REG_WRITE(ah, 0x5100c, lcr);
+	REG_WRITE(ah, 0x51004, (baud_divider >> 8));
+	REG_WRITE(ah, 0x51000, (baud_divider & 0xff));
+
+	lcr &= ~0x80;
+	REG_WRITE(ah, 0x5100c, lcr);
+}
+
 static void ath9k_hw_init_pll(struct ath_hw *ah,
 			      struct ath9k_channel *chan)
 {
@@ -1100,6 +1114,26 @@ static void ath9k_hw_init_pll(struct ath_hw *ah,
 	}
 	REG_WRITE(ah, AR_RTC_PLL_CONTROL, pll);
 
+	/* Switch the core clock for ar9271 to 117Mhz */
+	if (AR_SREV_9271(ah)) {
+		if ((pll == 0x142c) || (pll == 0x2850) ) {
+			udelay(500);
+			/* set CLKOBS to output AHB clock */
+			REG_WRITE(ah, 0x7020, 0xe);
+			/*
+			 * 0x304: 117Mhz, ahb_ratio: 1x1
+			 * 0x306: 40Mhz, ahb_ratio: 1x1
+			 */
+			REG_WRITE(ah, 0x50040, 0x304);
+			/*
+			 * makes adjustments for the baud dividor to keep the
+			 * targetted baud rate based on the used core clock.
+			 */
+			ath9k_hw_change_target_baud(ah, AR9271_CORE_CLOCK,
+						    AR9271_TARGET_BAUD_RATE);
+		}
+	}
+
 	udelay(RTC_PLL_SETTLE_DELAY);
 
 	REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_FORCE_DERIVED_CLK);
@@ -1252,7 +1286,8 @@ void ath9k_hw_detach(struct ath_hw *ah)
 	ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
 
 free_hw:
-	ath9k_hw_rf_free(ah);
+	if (!AR_SREV_9280_10_OR_LATER(ah))
+		ath9k_hw_rf_free_ext_banks(ah);
 	kfree(ah);
 	ah = NULL;
 }
@@ -1274,7 +1309,8 @@ static void ath9k_hw_override_ini(struct ath_hw *ah,
 		 * AR9271 1.1
 		 */
 		if (AR_SREV_9271_10(ah)) {
-			val = REG_READ(ah, AR_PHY_SPECTRAL_SCAN) | AR_PHY_SPECTRAL_SCAN_ENABLE;
+			val = REG_READ(ah, AR_PHY_SPECTRAL_SCAN) |
+			      AR_PHY_SPECTRAL_SCAN_ENABLE;
 			REG_WRITE(ah, AR_PHY_SPECTRAL_SCAN, val);
 		}
 		else if (AR_SREV_9271_11(ah))
@@ -1489,7 +1525,11 @@ static int ath9k_hw_process_ini(struct ath_hw *ah,
 		DO_DELAY(regWrites);
 	}
 
-	ath9k_hw_write_regs(ah, modesIndex, freqIndex, regWrites);
+	ath9k_hw_write_regs(ah, freqIndex, regWrites);
+
+	if (AR_SREV_9271_10(ah))
+		REG_WRITE_ARRAY(&ah->iniModes_9271_1_0_only,
+				modesIndex, regWrites);
 
 	if (AR_SREV_9280_20(ah) && IS_CHAN_A_5MHZ_SPACED(chan)) {
 		REG_WRITE_ARRAY(&ah->iniModesAdditional, modesIndex,
@@ -1832,6 +1872,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_channel *channel = chan->chan;
 	u32 synthDelay, qnum;
+	int r;
 
 	for (qnum = 0; qnum < AR_NUM_QCU; qnum++) {
 		if (ath9k_hw_numtxpending(ah, qnum)) {
@@ -1852,14 +1893,11 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
 
 	ath9k_hw_set_regs(ah, chan);
 
-	if (AR_SREV_9280_10_OR_LATER(ah)) {
-		ath9k_hw_ar9280_set_channel(ah, chan);
-	} else {
-		if (!(ath9k_hw_set_channel(ah, chan))) {
-			ath_print(common, ATH_DBG_FATAL,
-				  "Failed to set channel\n");
-			return false;
-		}
+	r = ah->ath9k_hw_rf_set_freq(ah, chan);
+	if (r) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Failed to set channel\n");
+		return false;
 	}
 
 	ah->eep_ops->set_txpower(ah, chan,
@@ -1882,10 +1920,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
 	if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan))
 		ath9k_hw_set_delta_slope(ah, chan);
 
-	if (AR_SREV_9280_10_OR_LATER(ah))
-		ath9k_hw_9280_spur_mitigate(ah, chan);
-	else
-		ath9k_hw_spur_mitigate(ah, chan);
+	ah->ath9k_hw_spur_mitigate_freq(ah, chan);
 
 	if (!chan->oneTimeCalsDone)
 		chan->oneTimeCalsDone = true;
@@ -1893,457 +1928,6 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
 	return true;
 }
 
-static void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan)
-{
-	int bb_spur = AR_NO_SPUR;
-	int freq;
-	int bin, cur_bin;
-	int bb_spur_off, spur_subchannel_sd;
-	int spur_freq_sd;
-	int spur_delta_phase;
-	int denominator;
-	int upper, lower, cur_vit_mask;
-	int tmp, newVal;
-	int i;
-	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
-			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
-	};
-	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
-			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
-	};
-	int inc[4] = { 0, 100, 0, 0 };
-	struct chan_centers centers;
-
-	int8_t mask_m[123];
-	int8_t mask_p[123];
-	int8_t mask_amt;
-	int tmp_mask;
-	int cur_bb_spur;
-	bool is2GHz = IS_CHAN_2GHZ(chan);
-
-	memset(&mask_m, 0, sizeof(int8_t) * 123);
-	memset(&mask_p, 0, sizeof(int8_t) * 123);
-
-	ath9k_hw_get_channel_centers(ah, chan, &centers);
-	freq = centers.synth_center;
-
-	ah->config.spurmode = SPUR_ENABLE_EEPROM;
-	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
-		cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz);
-
-		if (is2GHz)
-			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ;
-		else
-			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ;
-
-		if (AR_NO_SPUR == cur_bb_spur)
-			break;
-		cur_bb_spur = cur_bb_spur - freq;
-
-		if (IS_CHAN_HT40(chan)) {
-			if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) &&
-			    (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) {
-				bb_spur = cur_bb_spur;
-				break;
-			}
-		} else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) &&
-			   (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) {
-			bb_spur = cur_bb_spur;
-			break;
-		}
-	}
-
-	if (AR_NO_SPUR == bb_spur) {
-		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
-			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
-		return;
-	} else {
-		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
-			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
-	}
-
-	bin = bb_spur * 320;
-
-	tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
-
-	newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
-			AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
-			AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
-			AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
-	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal);
-
-	newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
-		  AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
-		  AR_PHY_SPUR_REG_MASK_RATE_SELECT |
-		  AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
-		  SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
-	REG_WRITE(ah, AR_PHY_SPUR_REG, newVal);
-
-	if (IS_CHAN_HT40(chan)) {
-		if (bb_spur < 0) {
-			spur_subchannel_sd = 1;
-			bb_spur_off = bb_spur + 10;
-		} else {
-			spur_subchannel_sd = 0;
-			bb_spur_off = bb_spur - 10;
-		}
-	} else {
-		spur_subchannel_sd = 0;
-		bb_spur_off = bb_spur;
-	}
-
-	if (IS_CHAN_HT40(chan))
-		spur_delta_phase =
-			((bb_spur * 262144) /
-			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
-	else
-		spur_delta_phase =
-			((bb_spur * 524288) /
-			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
-
-	denominator = IS_CHAN_2GHZ(chan) ? 44 : 40;
-	spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff;
-
-	newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
-		  SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
-		  SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
-	REG_WRITE(ah, AR_PHY_TIMING11, newVal);
-
-	newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S;
-	REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal);
-
-	cur_bin = -6000;
-	upper = bin + 100;
-	lower = bin - 100;
-
-	for (i = 0; i < 4; i++) {
-		int pilot_mask = 0;
-		int chan_mask = 0;
-		int bp = 0;
-		for (bp = 0; bp < 30; bp++) {
-			if ((cur_bin > lower) && (cur_bin < upper)) {
-				pilot_mask = pilot_mask | 0x1 << bp;
-				chan_mask = chan_mask | 0x1 << bp;
-			}
-			cur_bin += 100;
-		}
-		cur_bin += inc[i];
-		REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
-		REG_WRITE(ah, chan_mask_reg[i], chan_mask);
-	}
-
-	cur_vit_mask = 6100;
-	upper = bin + 120;
-	lower = bin - 120;
-
-	for (i = 0; i < 123; i++) {
-		if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
-
-			/* workaround for gcc bug #37014 */
-			volatile int tmp_v = abs(cur_vit_mask - bin);
-
-			if (tmp_v < 75)
-				mask_amt = 1;
-			else
-				mask_amt = 0;
-			if (cur_vit_mask < 0)
-				mask_m[abs(cur_vit_mask / 100)] = mask_amt;
-			else
-				mask_p[cur_vit_mask / 100] = mask_amt;
-		}
-		cur_vit_mask -= 100;
-	}
-
-	tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
-		| (mask_m[48] << 26) | (mask_m[49] << 24)
-		| (mask_m[50] << 22) | (mask_m[51] << 20)
-		| (mask_m[52] << 18) | (mask_m[53] << 16)
-		| (mask_m[54] << 14) | (mask_m[55] << 12)
-		| (mask_m[56] << 10) | (mask_m[57] << 8)
-		| (mask_m[58] << 6) | (mask_m[59] << 4)
-		| (mask_m[60] << 2) | (mask_m[61] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
-	REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
-
-	tmp_mask = (mask_m[31] << 28)
-		| (mask_m[32] << 26) | (mask_m[33] << 24)
-		| (mask_m[34] << 22) | (mask_m[35] << 20)
-		| (mask_m[36] << 18) | (mask_m[37] << 16)
-		| (mask_m[48] << 14) | (mask_m[39] << 12)
-		| (mask_m[40] << 10) | (mask_m[41] << 8)
-		| (mask_m[42] << 6) | (mask_m[43] << 4)
-		| (mask_m[44] << 2) | (mask_m[45] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
-
-	tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
-		| (mask_m[18] << 26) | (mask_m[18] << 24)
-		| (mask_m[20] << 22) | (mask_m[20] << 20)
-		| (mask_m[22] << 18) | (mask_m[22] << 16)
-		| (mask_m[24] << 14) | (mask_m[24] << 12)
-		| (mask_m[25] << 10) | (mask_m[26] << 8)
-		| (mask_m[27] << 6) | (mask_m[28] << 4)
-		| (mask_m[29] << 2) | (mask_m[30] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
-
-	tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28)
-		| (mask_m[2] << 26) | (mask_m[3] << 24)
-		| (mask_m[4] << 22) | (mask_m[5] << 20)
-		| (mask_m[6] << 18) | (mask_m[7] << 16)
-		| (mask_m[8] << 14) | (mask_m[9] << 12)
-		| (mask_m[10] << 10) | (mask_m[11] << 8)
-		| (mask_m[12] << 6) | (mask_m[13] << 4)
-		| (mask_m[14] << 2) | (mask_m[15] << 0);
-	REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
-
-	tmp_mask = (mask_p[15] << 28)
-		| (mask_p[14] << 26) | (mask_p[13] << 24)
-		| (mask_p[12] << 22) | (mask_p[11] << 20)
-		| (mask_p[10] << 18) | (mask_p[9] << 16)
-		| (mask_p[8] << 14) | (mask_p[7] << 12)
-		| (mask_p[6] << 10) | (mask_p[5] << 8)
-		| (mask_p[4] << 6) | (mask_p[3] << 4)
-		| (mask_p[2] << 2) | (mask_p[1] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
-
-	tmp_mask = (mask_p[30] << 28)
-		| (mask_p[29] << 26) | (mask_p[28] << 24)
-		| (mask_p[27] << 22) | (mask_p[26] << 20)
-		| (mask_p[25] << 18) | (mask_p[24] << 16)
-		| (mask_p[23] << 14) | (mask_p[22] << 12)
-		| (mask_p[21] << 10) | (mask_p[20] << 8)
-		| (mask_p[19] << 6) | (mask_p[18] << 4)
-		| (mask_p[17] << 2) | (mask_p[16] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
-
-	tmp_mask = (mask_p[45] << 28)
-		| (mask_p[44] << 26) | (mask_p[43] << 24)
-		| (mask_p[42] << 22) | (mask_p[41] << 20)
-		| (mask_p[40] << 18) | (mask_p[39] << 16)
-		| (mask_p[38] << 14) | (mask_p[37] << 12)
-		| (mask_p[36] << 10) | (mask_p[35] << 8)
-		| (mask_p[34] << 6) | (mask_p[33] << 4)
-		| (mask_p[32] << 2) | (mask_p[31] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
-
-	tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
-		| (mask_p[59] << 26) | (mask_p[58] << 24)
-		| (mask_p[57] << 22) | (mask_p[56] << 20)
-		| (mask_p[55] << 18) | (mask_p[54] << 16)
-		| (mask_p[53] << 14) | (mask_p[52] << 12)
-		| (mask_p[51] << 10) | (mask_p[50] << 8)
-		| (mask_p[49] << 6) | (mask_p[48] << 4)
-		| (mask_p[47] << 2) | (mask_p[46] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
-}
-
-static void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan)
-{
-	int bb_spur = AR_NO_SPUR;
-	int bin, cur_bin;
-	int spur_freq_sd;
-	int spur_delta_phase;
-	int denominator;
-	int upper, lower, cur_vit_mask;
-	int tmp, new;
-	int i;
-	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
-			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
-	};
-	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
-			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
-	};
-	int inc[4] = { 0, 100, 0, 0 };
-
-	int8_t mask_m[123];
-	int8_t mask_p[123];
-	int8_t mask_amt;
-	int tmp_mask;
-	int cur_bb_spur;
-	bool is2GHz = IS_CHAN_2GHZ(chan);
-
-	memset(&mask_m, 0, sizeof(int8_t) * 123);
-	memset(&mask_p, 0, sizeof(int8_t) * 123);
-
-	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
-		cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz);
-		if (AR_NO_SPUR == cur_bb_spur)
-			break;
-		cur_bb_spur = cur_bb_spur - (chan->channel * 10);
-		if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) {
-			bb_spur = cur_bb_spur;
-			break;
-		}
-	}
-
-	if (AR_NO_SPUR == bb_spur)
-		return;
-
-	bin = bb_spur * 32;
-
-	tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
-	new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
-		     AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
-		     AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
-		     AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
-
-	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), new);
-
-	new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
-	       AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
-	       AR_PHY_SPUR_REG_MASK_RATE_SELECT |
-	       AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
-	       SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
-	REG_WRITE(ah, AR_PHY_SPUR_REG, new);
-
-	spur_delta_phase = ((bb_spur * 524288) / 100) &
-		AR_PHY_TIMING11_SPUR_DELTA_PHASE;
-
-	denominator = IS_CHAN_2GHZ(chan) ? 440 : 400;
-	spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff;
-
-	new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
-	       SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
-	       SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
-	REG_WRITE(ah, AR_PHY_TIMING11, new);
-
-	cur_bin = -6000;
-	upper = bin + 100;
-	lower = bin - 100;
-
-	for (i = 0; i < 4; i++) {
-		int pilot_mask = 0;
-		int chan_mask = 0;
-		int bp = 0;
-		for (bp = 0; bp < 30; bp++) {
-			if ((cur_bin > lower) && (cur_bin < upper)) {
-				pilot_mask = pilot_mask | 0x1 << bp;
-				chan_mask = chan_mask | 0x1 << bp;
-			}
-			cur_bin += 100;
-		}
-		cur_bin += inc[i];
-		REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
-		REG_WRITE(ah, chan_mask_reg[i], chan_mask);
-	}
-
-	cur_vit_mask = 6100;
-	upper = bin + 120;
-	lower = bin - 120;
-
-	for (i = 0; i < 123; i++) {
-		if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
-
-			/* workaround for gcc bug #37014 */
-			volatile int tmp_v = abs(cur_vit_mask - bin);
-
-			if (tmp_v < 75)
-				mask_amt = 1;
-			else
-				mask_amt = 0;
-			if (cur_vit_mask < 0)
-				mask_m[abs(cur_vit_mask / 100)] = mask_amt;
-			else
-				mask_p[cur_vit_mask / 100] = mask_amt;
-		}
-		cur_vit_mask -= 100;
-	}
-
-	tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
-		| (mask_m[48] << 26) | (mask_m[49] << 24)
-		| (mask_m[50] << 22) | (mask_m[51] << 20)
-		| (mask_m[52] << 18) | (mask_m[53] << 16)
-		| (mask_m[54] << 14) | (mask_m[55] << 12)
-		| (mask_m[56] << 10) | (mask_m[57] << 8)
-		| (mask_m[58] << 6) | (mask_m[59] << 4)
-		| (mask_m[60] << 2) | (mask_m[61] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
-	REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
-
-	tmp_mask = (mask_m[31] << 28)
-		| (mask_m[32] << 26) | (mask_m[33] << 24)
-		| (mask_m[34] << 22) | (mask_m[35] << 20)
-		| (mask_m[36] << 18) | (mask_m[37] << 16)
-		| (mask_m[48] << 14) | (mask_m[39] << 12)
-		| (mask_m[40] << 10) | (mask_m[41] << 8)
-		| (mask_m[42] << 6) | (mask_m[43] << 4)
-		| (mask_m[44] << 2) | (mask_m[45] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
-
-	tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
-		| (mask_m[18] << 26) | (mask_m[18] << 24)
-		| (mask_m[20] << 22) | (mask_m[20] << 20)
-		| (mask_m[22] << 18) | (mask_m[22] << 16)
-		| (mask_m[24] << 14) | (mask_m[24] << 12)
-		| (mask_m[25] << 10) | (mask_m[26] << 8)
-		| (mask_m[27] << 6) | (mask_m[28] << 4)
-		| (mask_m[29] << 2) | (mask_m[30] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
-
-	tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28)
-		| (mask_m[2] << 26) | (mask_m[3] << 24)
-		| (mask_m[4] << 22) | (mask_m[5] << 20)
-		| (mask_m[6] << 18) | (mask_m[7] << 16)
-		| (mask_m[8] << 14) | (mask_m[9] << 12)
-		| (mask_m[10] << 10) | (mask_m[11] << 8)
-		| (mask_m[12] << 6) | (mask_m[13] << 4)
-		| (mask_m[14] << 2) | (mask_m[15] << 0);
-	REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
-
-	tmp_mask = (mask_p[15] << 28)
-		| (mask_p[14] << 26) | (mask_p[13] << 24)
-		| (mask_p[12] << 22) | (mask_p[11] << 20)
-		| (mask_p[10] << 18) | (mask_p[9] << 16)
-		| (mask_p[8] << 14) | (mask_p[7] << 12)
-		| (mask_p[6] << 10) | (mask_p[5] << 8)
-		| (mask_p[4] << 6) | (mask_p[3] << 4)
-		| (mask_p[2] << 2) | (mask_p[1] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
-
-	tmp_mask = (mask_p[30] << 28)
-		| (mask_p[29] << 26) | (mask_p[28] << 24)
-		| (mask_p[27] << 22) | (mask_p[26] << 20)
-		| (mask_p[25] << 18) | (mask_p[24] << 16)
-		| (mask_p[23] << 14) | (mask_p[22] << 12)
-		| (mask_p[21] << 10) | (mask_p[20] << 8)
-		| (mask_p[19] << 6) | (mask_p[18] << 4)
-		| (mask_p[17] << 2) | (mask_p[16] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
-
-	tmp_mask = (mask_p[45] << 28)
-		| (mask_p[44] << 26) | (mask_p[43] << 24)
-		| (mask_p[42] << 22) | (mask_p[41] << 20)
-		| (mask_p[40] << 18) | (mask_p[39] << 16)
-		| (mask_p[38] << 14) | (mask_p[37] << 12)
-		| (mask_p[36] << 10) | (mask_p[35] << 8)
-		| (mask_p[34] << 6) | (mask_p[33] << 4)
-		| (mask_p[32] << 2) | (mask_p[31] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
-
-	tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
-		| (mask_p[59] << 26) | (mask_p[58] << 24)
-		| (mask_p[57] << 22) | (mask_p[56] << 20)
-		| (mask_p[55] << 18) | (mask_p[54] << 16)
-		| (mask_p[53] << 14) | (mask_p[52] << 12)
-		| (mask_p[51] << 10) | (mask_p[50] << 8)
-		| (mask_p[49] << 6) | (mask_p[48] << 4)
-		| (mask_p[47] << 2) | (mask_p[46] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
-}
-
 static void ath9k_enable_rfkill(struct ath_hw *ah)
 {
 	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
@@ -2469,14 +2053,11 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan))
 		ath9k_hw_set_delta_slope(ah, chan);
 
-	if (AR_SREV_9280_10_OR_LATER(ah))
-		ath9k_hw_9280_spur_mitigate(ah, chan);
-	else
-		ath9k_hw_spur_mitigate(ah, chan);
-
+	ah->ath9k_hw_spur_mitigate_freq(ah, chan);
 	ah->eep_ops->set_board_values(ah, chan);
 
-	ath9k_hw_decrease_chain_power(ah, chan);
+	if (AR_SREV_5416(ah))
+		ath9k_hw_decrease_chain_power(ah, chan);
 
 	REG_WRITE(ah, AR_STA_ID0, get_unaligned_le32(common->macaddr));
 	REG_WRITE(ah, AR_STA_ID1, get_unaligned_le16(common->macaddr + 4)
@@ -2497,11 +2078,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 
 	REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
 
-	if (AR_SREV_9280_10_OR_LATER(ah))
-		ath9k_hw_ar9280_set_channel(ah, chan);
-	else
-		if (!(ath9k_hw_set_channel(ah, chan)))
-			return -EIO;
+	r = ah->ath9k_hw_rf_set_freq(ah, chan);
+	if (r)
+		return r;
 
 	for (i = 0; i < AR_NUM_DCU; i++)
 		REG_WRITE(ah, AR_DQCUMASK(i), 1 << i);
@@ -4350,3 +3929,89 @@ void ath_gen_timer_isr(struct ath_hw *ah)
 	}
 }
 EXPORT_SYMBOL(ath_gen_timer_isr);
+
+static struct {
+	u32 version;
+	const char * name;
+} ath_mac_bb_names[] = {
+	/* Devices with external radios */
+	{ AR_SREV_VERSION_5416_PCI,	"5416" },
+	{ AR_SREV_VERSION_5416_PCIE,	"5418" },
+	{ AR_SREV_VERSION_9100,		"9100" },
+	{ AR_SREV_VERSION_9160,		"9160" },
+	/* Single-chip solutions */
+	{ AR_SREV_VERSION_9280,		"9280" },
+	{ AR_SREV_VERSION_9285,		"9285" },
+	{ AR_SREV_VERSION_9287,         "9287" },
+	{ AR_SREV_VERSION_9271,         "9271" },
+};
+
+/* For devices with external radios */
+static struct {
+	u16 version;
+	const char * name;
+} ath_rf_names[] = {
+	{ 0,				"5133" },
+	{ AR_RAD5133_SREV_MAJOR,	"5133" },
+	{ AR_RAD5122_SREV_MAJOR,	"5122" },
+	{ AR_RAD2133_SREV_MAJOR,	"2133" },
+	{ AR_RAD2122_SREV_MAJOR,	"2122" }
+};
+
+/*
+ * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
+ */
+static const char *ath9k_hw_mac_bb_name(u32 mac_bb_version)
+{
+	int i;
+
+	for (i=0; i<ARRAY_SIZE(ath_mac_bb_names); i++) {
+		if (ath_mac_bb_names[i].version == mac_bb_version) {
+			return ath_mac_bb_names[i].name;
+		}
+	}
+
+	return "????";
+}
+
+/*
+ * Return the RF name. "????" is returned if the RF is unknown.
+ * Used for devices with external radios.
+ */
+static const char *ath9k_hw_rf_name(u16 rf_version)
+{
+	int i;
+
+	for (i=0; i<ARRAY_SIZE(ath_rf_names); i++) {
+		if (ath_rf_names[i].version == rf_version) {
+			return ath_rf_names[i].name;
+		}
+	}
+
+	return "????";
+}
+
+void ath9k_hw_name(struct ath_hw *ah, char *hw_name, size_t len)
+{
+	int used;
+
+	/* chipsets >= AR9280 are single-chip */
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		used = snprintf(hw_name, len,
+			       "Atheros AR%s Rev:%x",
+			       ath9k_hw_mac_bb_name(ah->hw_version.macVersion),
+			       ah->hw_version.macRev);
+	}
+	else {
+		used = snprintf(hw_name, len,
+			       "Atheros AR%s MAC/BB Rev:%x AR%s RF Rev:%x",
+			       ath9k_hw_mac_bb_name(ah->hw_version.macVersion),
+			       ah->hw_version.macRev,
+			       ath9k_hw_rf_name((ah->hw_version.analog5GhzRev &
+						AR_RADIO_SREV_MAJOR)),
+			       ah->hw_version.phyRev);
+	}
+
+	hw_name[used] = '\0';
+}
+EXPORT_SYMBOL(ath9k_hw_name);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index cdaec526db3..c7b0c4d5f75 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -148,6 +148,15 @@ enum wireless_mode {
 	ATH9K_MODE_MAX,
 };
 
+/**
+ * ath9k_ant_setting - transmit antenna settings
+ *
+ * Configures the antenna setting to use for transmit.
+ *
+ * @ATH9K_ANT_VARIABLE: this means transmit on all active antennas
+ * @ATH9K_ANT_FIXED_A: this means transmit on the first antenna only
+ * @ATH9K_ANT_FIXED_B: this means transmit on the second antenna only
+ */
 enum ath9k_ant_setting {
 	ATH9K_ANT_VARIABLE = 0,
 	ATH9K_ANT_FIXED_A,
@@ -539,7 +548,14 @@ struct ath_hw {
 		DONT_USE_32KHZ,
 	} enable_32kHz_clock;
 
-	/* RF */
+	/* Callback for radio frequency change */
+	int (*ath9k_hw_rf_set_freq)(struct ath_hw *ah, struct ath9k_channel *chan);
+
+	/* Callback for baseband spur frequency */
+	void (*ath9k_hw_spur_mitigate_freq)(struct ath_hw *ah,
+					    struct ath9k_channel *chan);
+
+	/* Used to program the radio on non single-chip devices */
 	u32 *analogBank0Data;
 	u32 *analogBank1Data;
 	u32 *analogBank2Data;
@@ -596,6 +612,7 @@ struct ath_hw {
 	struct ar5416IniArray iniModesAdditional;
 	struct ar5416IniArray iniModesRxGain;
 	struct ar5416IniArray iniModesTxGain;
+	struct ar5416IniArray iniModes_9271_1_0_only;
 	struct ar5416IniArray iniCckfirNormal;
 	struct ar5416IniArray iniCckfirJapan2484;
 
@@ -618,7 +635,6 @@ static inline struct ath_regulatory *ath9k_hw_regulatory(struct ath_hw *ah)
 const char *ath9k_hw_probe(u16 vendorid, u16 devid);
 void ath9k_hw_detach(struct ath_hw *ah);
 int ath9k_hw_init(struct ath_hw *ah);
-void ath9k_hw_rf_free(struct ath_hw *ah);
 int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		   bool bChannelChange);
 void ath9k_hw_fill_cap_info(struct ath_hw *ah);
@@ -704,6 +720,8 @@ void ath_gen_timer_free(struct ath_hw *ah, struct ath_gen_timer *timer);
 void ath_gen_timer_isr(struct ath_hw *hw);
 u32 ath9k_hw_gettsf32(struct ath_hw *ah);
 
+void ath9k_hw_name(struct ath_hw *ah, char *hw_name, size_t len);
+
 #define ATH_PCIE_CAP_LINK_CTRL	0x70
 #define ATH_PCIE_CAP_LINK_L0S	1
 #define ATH_PCIE_CAP_LINK_L1	2
diff --git a/drivers/net/wireless/ath/ath9k/initvals.h b/drivers/net/wireless/ath/ath9k/initvals.h
index 3ee6658d809..8a3bf3ab998 100644
--- a/drivers/net/wireless/ath/ath9k/initvals.h
+++ b/drivers/net/wireless/ath/ath9k/initvals.h
@@ -6379,8 +6379,8 @@ static const u_int32_t ar9287PciePhy_clkreq_off_L1_9287_1_1[][2] = {
 };
 
 
-/* AR9271 initialization values automaticaly created: 03/23/09 */
-static const u_int32_t ar9271Modes_9271_1_0[][6] = {
+/* AR9271 initialization values automaticaly created: 06/04/09 */
+static const u_int32_t ar9271Modes_9271[][6] = {
     { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
     { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
     { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
@@ -6390,8 +6390,8 @@ static const u_int32_t ar9271Modes_9271_1_0[][6] = {
     { 0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440, 0x00006880 },
     { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
     { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
-    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
-    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+    { 0x00009824, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e },
+    { 0x00009828, 0x3a020001, 0x3a020001, 0x3a020001, 0x3a020001, 0x3a020001 },
     { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
     { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
     { 0x00009840, 0x206a012e, 0x206a012e, 0x206a012e, 0x206a012e, 0x206a012e },
@@ -6405,6 +6405,7 @@ static const u_int32_t ar9271Modes_9271_1_0[][6] = {
     { 0x00009864, 0x0000fe00, 0x0000fe00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
     { 0x00009868, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0 },
     { 0x0000986c, 0x06903081, 0x06903081, 0x06903881, 0x06903881, 0x06903881 },
+    { 0x00009910, 0x30002310, 0x30002310, 0x30002310, 0x30002310, 0x30002310 },
     { 0x00009914, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898, 0x000007d0 },
     { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 },
     { 0x00009924, 0xd00a8007, 0xd00a8007, 0xd00a800d, 0xd00a800d, 0xd00a800d },
@@ -6415,7 +6416,7 @@ static const u_int32_t ar9271Modes_9271_1_0[][6] = {
     { 0x000099bc, 0x00000600, 0x00000600, 0x00000c00, 0x00000c00, 0x00000c00 },
     { 0x000099c0, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4 },
     { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
-    { 0x000099c8, 0x6af65329, 0x6af65329, 0x6af65329, 0x6af65329, 0x6af65329 },
+    { 0x000099c8, 0x6af6532f, 0x6af6532f, 0x6af6532f, 0x6af6532f, 0x6af6532f },
     { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
     { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
     { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
@@ -6704,7 +6705,7 @@ static const u_int32_t ar9271Modes_9271_1_0[][6] = {
     { 0x0000a358, 0x7999aa02, 0x7999aa02, 0x7999aa0e, 0x7999aa0e, 0x7999aa0e },
 };
 
-static const u_int32_t ar9271Common_9271_1_0[][2] = {
+static const u_int32_t ar9271Common_9271[][2] = {
     { 0x0000000c, 0x00000000 },
     { 0x00000030, 0x00020045 },
     { 0x00000034, 0x00000005 },
@@ -6800,7 +6801,7 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = {
     { 0x0000803c, 0x00000000 },
     { 0x00008048, 0x00000000 },
     { 0x00008054, 0x00000000 },
-    { 0x00008058, 0x02000000 },
+    { 0x00008058, 0x00000000 },
     { 0x0000805c, 0x000fc78f },
     { 0x00008060, 0x0000000f },
     { 0x00008064, 0x00000000 },
@@ -6831,7 +6832,7 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = {
     { 0x00008110, 0x00000168 },
     { 0x00008118, 0x000100aa },
     { 0x0000811c, 0x00003210 },
-    { 0x00008120, 0x08f04814 },
+    { 0x00008120, 0x08f04810 },
     { 0x00008124, 0x00000000 },
     { 0x00008128, 0x00000000 },
     { 0x0000812c, 0x00000000 },
@@ -6878,7 +6879,7 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = {
     { 0x00008258, 0x00000000 },
     { 0x0000825c, 0x400000ff },
     { 0x00008260, 0x00080922 },
-    { 0x00008264, 0xa8a00010 },
+    { 0x00008264, 0x88a00010 },
     { 0x00008270, 0x00000000 },
     { 0x00008274, 0x40000000 },
     { 0x00008278, 0x003e4180 },
@@ -6910,7 +6911,7 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = {
     { 0x00007814, 0x924934a8 },
     { 0x0000781c, 0x00000000 },
     { 0x00007820, 0x00000c04 },
-    { 0x00007824, 0x00d86bff },
+    { 0x00007824, 0x00d8abff },
     { 0x00007828, 0x66964300 },
     { 0x0000782c, 0x8db6d961 },
     { 0x00007830, 0x8db6d96c },
@@ -6944,7 +6945,6 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = {
     { 0x00009904, 0x00000000 },
     { 0x00009908, 0x00000000 },
     { 0x0000990c, 0x00000000 },
-    { 0x00009910, 0x30002310 },
     { 0x0000991c, 0x10000fff },
     { 0x00009920, 0x04900000 },
     { 0x00009928, 0x00000001 },
@@ -6958,7 +6958,7 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = {
     { 0x00009954, 0x5f3ca3de },
     { 0x00009958, 0x0108ecff },
     { 0x00009968, 0x000003ce },
-    { 0x00009970, 0x192bb515 },
+    { 0x00009970, 0x192bb514 },
     { 0x00009974, 0x00000000 },
     { 0x00009978, 0x00000001 },
     { 0x0000997c, 0x00000000 },
@@ -7045,3 +7045,8 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = {
     { 0x0000d380, 0x7f3c7bba },
     { 0x0000d384, 0xf3307ff0 },
 };
+
+static const u_int32_t ar9271Modes_9271_1_0_only[][6] = {
+    { 0x00009910, 0x30002311, 0x30002311, 0x30002311, 0x30002311, 0x30002311 },
+    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+};
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 69cf702b18c..9fefc51aec1 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -3191,64 +3191,6 @@ struct ieee80211_ops ath9k_ops = {
 	.rfkill_poll        = ath9k_rfkill_poll_state,
 };
 
-static struct {
-	u32 version;
-	const char * name;
-} ath_mac_bb_names[] = {
-	{ AR_SREV_VERSION_5416_PCI,	"5416" },
-	{ AR_SREV_VERSION_5416_PCIE,	"5418" },
-	{ AR_SREV_VERSION_9100,		"9100" },
-	{ AR_SREV_VERSION_9160,		"9160" },
-	{ AR_SREV_VERSION_9280,		"9280" },
-	{ AR_SREV_VERSION_9285,		"9285" },
-	{ AR_SREV_VERSION_9287,         "9287" }
-};
-
-static struct {
-	u16 version;
-	const char * name;
-} ath_rf_names[] = {
-	{ 0,				"5133" },
-	{ AR_RAD5133_SREV_MAJOR,	"5133" },
-	{ AR_RAD5122_SREV_MAJOR,	"5122" },
-	{ AR_RAD2133_SREV_MAJOR,	"2133" },
-	{ AR_RAD2122_SREV_MAJOR,	"2122" }
-};
-
-/*
- * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
- */
-const char *
-ath_mac_bb_name(u32 mac_bb_version)
-{
-	int i;
-
-	for (i=0; i<ARRAY_SIZE(ath_mac_bb_names); i++) {
-		if (ath_mac_bb_names[i].version == mac_bb_version) {
-			return ath_mac_bb_names[i].name;
-		}
-	}
-
-	return "????";
-}
-
-/*
- * Return the RF name. "????" is returned if the RF is unknown.
- */
-const char *
-ath_rf_name(u16 rf_version)
-{
-	int i;
-
-	for (i=0; i<ARRAY_SIZE(ath_rf_names); i++) {
-		if (ath_rf_names[i].version == rf_version) {
-			return ath_rf_names[i].name;
-		}
-	}
-
-	return "????";
-}
-
 static int __init ath9k_init(void)
 {
 	int error;
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 63059b6a90d..5321f735e5a 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -114,6 +114,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	u32 val;
 	int ret = 0;
 	struct ath_hw *ah;
+	char hw_name[64];
 
 	if (pci_enable_device(pdev))
 		return -EIO;
@@ -218,14 +219,11 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	sc->irq = pdev->irq;
 
 	ah = sc->sc_ah;
+	ath9k_hw_name(ah, hw_name, sizeof(hw_name));
 	printk(KERN_INFO
-	       "%s: Atheros AR%s MAC/BB Rev:%x "
-	       "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n",
+	       "%s: %s mem=0x%lx, irq=%d\n",
 	       wiphy_name(hw->wiphy),
-	       ath_mac_bb_name(ah->hw_version.macVersion),
-	       ah->hw_version.macRev,
-	       ath_rf_name((ah->hw_version.analog5GhzRev & AR_RADIO_SREV_MAJOR)),
-	       ah->hw_version.phyRev,
+	       hw_name,
 	       (unsigned long)mem, pdev->irq);
 
 	return 0;
diff --git a/drivers/net/wireless/ath/ath9k/phy.c b/drivers/net/wireless/ath/ath9k/phy.c
index 72a17c43a5a..13ab4d7eb7a 100644
--- a/drivers/net/wireless/ath/ath9k/phy.c
+++ b/drivers/net/wireless/ath/ath9k/phy.c
@@ -14,91 +14,70 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+/**
+ * DOC: Programming Atheros 802.11n analog front end radios
+ *
+ * AR5416 MAC based PCI devices and AR518 MAC based PCI-Express
+ * devices have either an external AR2133 analog front end radio for single
+ * band 2.4 GHz communication or an AR5133 analog front end radio for dual
+ * band 2.4 GHz / 5 GHz communication.
+ *
+ * All devices after the AR5416 and AR5418 family starting with the AR9280
+ * have their analog front radios, MAC/BB and host PCIe/USB interface embedded
+ * into a single-chip and require less programming.
+ *
+ * The following single-chips exist with a respective embedded radio:
+ *
+ * AR9280 - 11n dual-band 2x2 MIMO for PCIe
+ * AR9281 - 11n single-band 1x2 MIMO for PCIe
+ * AR9285 - 11n single-band 1x1 for PCIe
+ * AR9287 - 11n single-band 2x2 MIMO for PCIe
+ *
+ * AR9220 - 11n dual-band 2x2 MIMO for PCI
+ * AR9223 - 11n single-band 2x2 MIMO for PCI
+ *
+ * AR9287 - 11n single-band 1x1 MIMO for USB
+ */
+
 #include "hw.h"
 
-void
-ath9k_hw_write_regs(struct ath_hw *ah, u32 modesIndex, u32 freqIndex,
-		    int regWrites)
+/**
+ * ath9k_hw_write_regs - ??
+ *
+ * @ah: atheros hardware structure
+ * @freqIndex:
+ * @regWrites:
+ *
+ * Used for both the chipsets with an external AR2133/AR5133 radios and
+ * single-chip devices.
+ */
+void ath9k_hw_write_regs(struct ath_hw *ah, u32 freqIndex, int regWrites)
 {
 	REG_WRITE_ARRAY(&ah->iniBB_RfGain, freqIndex, regWrites);
 }
 
-bool
-ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
-{
-	struct ath_common *common = ath9k_hw_common(ah);
-	u32 channelSel = 0;
-	u32 bModeSynth = 0;
-	u32 aModeRefSel = 0;
-	u32 reg32 = 0;
-	u16 freq;
-	struct chan_centers centers;
-
-	ath9k_hw_get_channel_centers(ah, chan, &centers);
-	freq = centers.synth_center;
-
-	if (freq < 4800) {
-		u32 txctl;
-
-		if (((freq - 2192) % 5) == 0) {
-			channelSel = ((freq - 672) * 2 - 3040) / 10;
-			bModeSynth = 0;
-		} else if (((freq - 2224) % 5) == 0) {
-			channelSel = ((freq - 704) * 2 - 3040) / 10;
-			bModeSynth = 1;
-		} else {
-			ath_print(common, ATH_DBG_FATAL,
-				  "Invalid channel %u MHz\n", freq);
-			return false;
-		}
-
-		channelSel = (channelSel << 2) & 0xff;
-		channelSel = ath9k_hw_reverse_bits(channelSel, 8);
-
-		txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL);
-		if (freq == 2484) {
-
-			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
-				  txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
-		} else {
-			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
-				  txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN);
-		}
-
-	} else if ((freq % 20) == 0 && freq >= 5120) {
-		channelSel =
-		    ath9k_hw_reverse_bits(((freq - 4800) / 20 << 2), 8);
-		aModeRefSel = ath9k_hw_reverse_bits(1, 2);
-	} else if ((freq % 10) == 0) {
-		channelSel =
-		    ath9k_hw_reverse_bits(((freq - 4800) / 10 << 1), 8);
-		if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah))
-			aModeRefSel = ath9k_hw_reverse_bits(2, 2);
-		else
-			aModeRefSel = ath9k_hw_reverse_bits(1, 2);
-	} else if ((freq % 5) == 0) {
-		channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8);
-		aModeRefSel = ath9k_hw_reverse_bits(1, 2);
-	} else {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Invalid channel %u MHz\n", freq);
-		return false;
-	}
-
-	reg32 =
-	    (channelSel << 8) | (aModeRefSel << 2) | (bModeSynth << 1) |
-	    (1 << 5) | 0x1;
-
-	REG_WRITE(ah, AR_PHY(0x37), reg32);
-
-	ah->curchan = chan;
-	ah->curchan_rad_index = -1;
-
-	return true;
-}
-
-void ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
-				 struct ath9k_channel *chan)
+/**
+ * ath9k_hw_ar9280_set_channel - set channel on single-chip device
+ * @ah: atheros hardware structure
+ * @chan:
+ *
+ * This is the function to change channel on single-chip devices, that is
+ * all devices after ar9280.
+ *
+ * This function takes the channel value in MHz and sets
+ * hardware channel value. Assumes writes have been enabled to analog bus.
+ *
+ * Actual Expression,
+ *
+ * For 2GHz channel,
+ * Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17)
+ * (freq_ref = 40MHz)
+ *
+ * For 5GHz channel,
+ * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10)
+ * (freq_ref = 40MHz/(24>>amodeRefSel))
+ */
+int ath9k_hw_ar9280_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 {
 	u16 bMode, fracMode, aModeRefSel = 0;
 	u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0;
@@ -111,7 +90,7 @@ void ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
 	reg32 = REG_READ(ah, AR_PHY_SYNTH_CONTROL);
 	reg32 &= 0xc0000000;
 
-	if (freq < 4800) {
+	if (freq < 4800) { /* 2 GHz, fractional mode */
 		u32 txctl;
 		int regWrites = 0;
 
@@ -122,6 +101,7 @@ void ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
 
 		if (AR_SREV_9287_11_OR_LATER(ah)) {
 			if (freq == 2484) {
+				/* Enable channel spreading for channel 14 */
 				REG_WRITE_ARRAY(&ah->iniCckfirJapan2484,
 						1, regWrites);
 			} else {
@@ -155,10 +135,15 @@ void ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
 		case 1:
 		default:
 			aModeRefSel = 0;
+			/*
+			 * Enable 2G (fractional) mode for channels
+			 * which are 5MHz spaced.
+			 */
 			fracMode = 1;
 			refDivA = 1;
 			channelSel = (freq * 0x8000) / 15;
 
+			/* RefDivA setting */
 			REG_RMW_FIELD(ah, AR_AN_SYNTH9,
 				      AR_AN_SYNTH9_REFDIVA, refDivA);
 
@@ -180,12 +165,284 @@ void ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
 
 	ah->curchan = chan;
 	ah->curchan_rad_index = -1;
+
+	return 0;
+}
+
+/**
+ * ath9k_hw_9280_spur_mitigate - convert baseband spur frequency
+ * @ah: atheros hardware structure
+ * @chan:
+ *
+ * For single-chip solutions. Converts to baseband spur frequency given the
+ * input channel frequency and compute register settings below.
+ */
+void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan)
+{
+	int bb_spur = AR_NO_SPUR;
+	int freq;
+	int bin, cur_bin;
+	int bb_spur_off, spur_subchannel_sd;
+	int spur_freq_sd;
+	int spur_delta_phase;
+	int denominator;
+	int upper, lower, cur_vit_mask;
+	int tmp, newVal;
+	int i;
+	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
+			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
+	};
+	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
+			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
+	};
+	int inc[4] = { 0, 100, 0, 0 };
+	struct chan_centers centers;
+
+	int8_t mask_m[123];
+	int8_t mask_p[123];
+	int8_t mask_amt;
+	int tmp_mask;
+	int cur_bb_spur;
+	bool is2GHz = IS_CHAN_2GHZ(chan);
+
+	memset(&mask_m, 0, sizeof(int8_t) * 123);
+	memset(&mask_p, 0, sizeof(int8_t) * 123);
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = centers.synth_center;
+
+	ah->config.spurmode = SPUR_ENABLE_EEPROM;
+	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
+		cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz);
+
+		if (is2GHz)
+			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ;
+		else
+			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ;
+
+		if (AR_NO_SPUR == cur_bb_spur)
+			break;
+		cur_bb_spur = cur_bb_spur - freq;
+
+		if (IS_CHAN_HT40(chan)) {
+			if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) &&
+			    (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) {
+				bb_spur = cur_bb_spur;
+				break;
+			}
+		} else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) &&
+			   (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) {
+			bb_spur = cur_bb_spur;
+			break;
+		}
+	}
+
+	if (AR_NO_SPUR == bb_spur) {
+		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
+			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
+		return;
+	} else {
+		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
+			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
+	}
+
+	bin = bb_spur * 320;
+
+	tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
+
+	newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
+			AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
+			AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
+			AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
+	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal);
+
+	newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
+		  AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
+		  AR_PHY_SPUR_REG_MASK_RATE_SELECT |
+		  AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
+		  SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
+	REG_WRITE(ah, AR_PHY_SPUR_REG, newVal);
+
+	if (IS_CHAN_HT40(chan)) {
+		if (bb_spur < 0) {
+			spur_subchannel_sd = 1;
+			bb_spur_off = bb_spur + 10;
+		} else {
+			spur_subchannel_sd = 0;
+			bb_spur_off = bb_spur - 10;
+		}
+	} else {
+		spur_subchannel_sd = 0;
+		bb_spur_off = bb_spur;
+	}
+
+	if (IS_CHAN_HT40(chan))
+		spur_delta_phase =
+			((bb_spur * 262144) /
+			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+	else
+		spur_delta_phase =
+			((bb_spur * 524288) /
+			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+
+	denominator = IS_CHAN_2GHZ(chan) ? 44 : 40;
+	spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff;
+
+	newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
+		  SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
+		  SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
+	REG_WRITE(ah, AR_PHY_TIMING11, newVal);
+
+	newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S;
+	REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal);
+
+	cur_bin = -6000;
+	upper = bin + 100;
+	lower = bin - 100;
+
+	for (i = 0; i < 4; i++) {
+		int pilot_mask = 0;
+		int chan_mask = 0;
+		int bp = 0;
+		for (bp = 0; bp < 30; bp++) {
+			if ((cur_bin > lower) && (cur_bin < upper)) {
+				pilot_mask = pilot_mask | 0x1 << bp;
+				chan_mask = chan_mask | 0x1 << bp;
+			}
+			cur_bin += 100;
+		}
+		cur_bin += inc[i];
+		REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
+		REG_WRITE(ah, chan_mask_reg[i], chan_mask);
+	}
+
+	cur_vit_mask = 6100;
+	upper = bin + 120;
+	lower = bin - 120;
+
+	for (i = 0; i < 123; i++) {
+		if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
+
+			/* workaround for gcc bug #37014 */
+			volatile int tmp_v = abs(cur_vit_mask - bin);
+
+			if (tmp_v < 75)
+				mask_amt = 1;
+			else
+				mask_amt = 0;
+			if (cur_vit_mask < 0)
+				mask_m[abs(cur_vit_mask / 100)] = mask_amt;
+			else
+				mask_p[cur_vit_mask / 100] = mask_amt;
+		}
+		cur_vit_mask -= 100;
+	}
+
+	tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
+		| (mask_m[48] << 26) | (mask_m[49] << 24)
+		| (mask_m[50] << 22) | (mask_m[51] << 20)
+		| (mask_m[52] << 18) | (mask_m[53] << 16)
+		| (mask_m[54] << 14) | (mask_m[55] << 12)
+		| (mask_m[56] << 10) | (mask_m[57] << 8)
+		| (mask_m[58] << 6) | (mask_m[59] << 4)
+		| (mask_m[60] << 2) | (mask_m[61] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
+
+	tmp_mask = (mask_m[31] << 28)
+		| (mask_m[32] << 26) | (mask_m[33] << 24)
+		| (mask_m[34] << 22) | (mask_m[35] << 20)
+		| (mask_m[36] << 18) | (mask_m[37] << 16)
+		| (mask_m[48] << 14) | (mask_m[39] << 12)
+		| (mask_m[40] << 10) | (mask_m[41] << 8)
+		| (mask_m[42] << 6) | (mask_m[43] << 4)
+		| (mask_m[44] << 2) | (mask_m[45] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
+
+	tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
+		| (mask_m[18] << 26) | (mask_m[18] << 24)
+		| (mask_m[20] << 22) | (mask_m[20] << 20)
+		| (mask_m[22] << 18) | (mask_m[22] << 16)
+		| (mask_m[24] << 14) | (mask_m[24] << 12)
+		| (mask_m[25] << 10) | (mask_m[26] << 8)
+		| (mask_m[27] << 6) | (mask_m[28] << 4)
+		| (mask_m[29] << 2) | (mask_m[30] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
+
+	tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28)
+		| (mask_m[2] << 26) | (mask_m[3] << 24)
+		| (mask_m[4] << 22) | (mask_m[5] << 20)
+		| (mask_m[6] << 18) | (mask_m[7] << 16)
+		| (mask_m[8] << 14) | (mask_m[9] << 12)
+		| (mask_m[10] << 10) | (mask_m[11] << 8)
+		| (mask_m[12] << 6) | (mask_m[13] << 4)
+		| (mask_m[14] << 2) | (mask_m[15] << 0);
+	REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
+
+	tmp_mask = (mask_p[15] << 28)
+		| (mask_p[14] << 26) | (mask_p[13] << 24)
+		| (mask_p[12] << 22) | (mask_p[11] << 20)
+		| (mask_p[10] << 18) | (mask_p[9] << 16)
+		| (mask_p[8] << 14) | (mask_p[7] << 12)
+		| (mask_p[6] << 10) | (mask_p[5] << 8)
+		| (mask_p[4] << 6) | (mask_p[3] << 4)
+		| (mask_p[2] << 2) | (mask_p[1] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
+
+	tmp_mask = (mask_p[30] << 28)
+		| (mask_p[29] << 26) | (mask_p[28] << 24)
+		| (mask_p[27] << 22) | (mask_p[26] << 20)
+		| (mask_p[25] << 18) | (mask_p[24] << 16)
+		| (mask_p[23] << 14) | (mask_p[22] << 12)
+		| (mask_p[21] << 10) | (mask_p[20] << 8)
+		| (mask_p[19] << 6) | (mask_p[18] << 4)
+		| (mask_p[17] << 2) | (mask_p[16] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
+
+	tmp_mask = (mask_p[45] << 28)
+		| (mask_p[44] << 26) | (mask_p[43] << 24)
+		| (mask_p[42] << 22) | (mask_p[41] << 20)
+		| (mask_p[40] << 18) | (mask_p[39] << 16)
+		| (mask_p[38] << 14) | (mask_p[37] << 12)
+		| (mask_p[36] << 10) | (mask_p[35] << 8)
+		| (mask_p[34] << 6) | (mask_p[33] << 4)
+		| (mask_p[32] << 2) | (mask_p[31] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
+
+	tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
+		| (mask_p[59] << 26) | (mask_p[58] << 24)
+		| (mask_p[57] << 22) | (mask_p[56] << 20)
+		| (mask_p[55] << 18) | (mask_p[54] << 16)
+		| (mask_p[53] << 14) | (mask_p[52] << 12)
+		| (mask_p[51] << 10) | (mask_p[50] << 8)
+		| (mask_p[49] << 6) | (mask_p[48] << 4)
+		| (mask_p[47] << 2) | (mask_p[46] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
 }
 
-static void
-ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32,
-			   u32 numBits, u32 firstBit,
-			   u32 column)
+/* All code below is for non single-chip solutions */
+
+/**
+ * ath9k_phy_modify_rx_buffer() - perform analog swizzling of parameters
+ * @rfbuf:
+ * @reg32:
+ * @numBits:
+ * @firstBit:
+ * @column:
+ *
+ * Performs analog "swizzling" of parameters into their location.
+ * Used on external AR2133/AR5133 radios.
+ */
+static void ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32,
+				       u32 numBits, u32 firstBit,
+				       u32 column)
 {
 	u32 tmp32, mask, arrayEntry, lastBit;
 	int32_t bitPosition, bitsLeft;
@@ -209,26 +466,556 @@ ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32,
 	}
 }
 
-bool
-ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan,
-		     u16 modesIndex)
+/*
+ * Fix on 2.4 GHz band for orientation sensitivity issue by increasing
+ * rf_pwd_icsyndiv.
+ *
+ * Theoretical Rules:
+ *   if 2 GHz band
+ *      if forceBiasAuto
+ *         if synth_freq < 2412
+ *            bias = 0
+ *         else if 2412 <= synth_freq <= 2422
+ *            bias = 1
+ *         else // synth_freq > 2422
+ *            bias = 2
+ *      else if forceBias > 0
+ *         bias = forceBias & 7
+ *      else
+ *         no change, use value from ini file
+ *   else
+ *      no change, invalid band
+ *
+ *  1st Mod:
+ *    2422 also uses value of 2
+ *    <approved>
+ *
+ *  2nd Mod:
+ *    Less than 2412 uses value of 0, 2412 and above uses value of 2
+ */
+static void ath9k_hw_force_bias(struct ath_hw *ah, u16 synth_freq)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	u32 tmp_reg;
+	int reg_writes = 0;
+	u32 new_bias = 0;
+
+	if (!AR_SREV_5416(ah) || synth_freq >= 3000) {
+		return;
+	}
+
+	BUG_ON(AR_SREV_9280_10_OR_LATER(ah));
+
+	if (synth_freq < 2412)
+		new_bias = 0;
+	else if (synth_freq < 2422)
+		new_bias = 1;
+	else
+		new_bias = 2;
+
+	/* pre-reverse this field */
+	tmp_reg = ath9k_hw_reverse_bits(new_bias, 3);
+
+	ath_print(common, ATH_DBG_CONFIG,
+		  "Force rf_pwd_icsyndiv to %1d on %4d\n",
+		  new_bias, synth_freq);
+
+	/* swizzle rf_pwd_icsyndiv */
+	ath9k_phy_modify_rx_buffer(ah->analogBank6Data, tmp_reg, 3, 181, 3);
+
+	/* write Bank 6 with new params */
+	REG_WRITE_RF_ARRAY(&ah->iniBank6, ah->analogBank6Data, reg_writes);
+}
+
+/**
+ * ath9k_hw_decrease_chain_power()
+ *
+ * @ah: atheros hardware structure
+ * @chan:
+ *
+ * Only used on the AR5416 and AR5418 with the external AR2133/AR5133 radios.
+ *
+ * Sets a chain internal RF path to the lowest output power. Any
+ * further writes to bank6 after this setting will override these
+ * changes. Thus this function must be the last function in the
+ * sequence to modify bank 6.
+ *
+ * This function must be called after ar5416SetRfRegs() which is
+ * called from ath9k_hw_process_ini() due to swizzling of bank 6.
+ * Depends on ah->analogBank6Data being initialized by
+ * ath9k_hw_set_rf_regs()
+ *
+ * Additional additive reduction in power -
+ * change chain's switch table so chain's tx state is actually the rx
+ * state value. May produce different results in 2GHz/5GHz as well as
+ * board to board but in general should be a reduction.
+ *
+ * Activated by #ifdef ALTER_SWITCH.  Not tried yet.  If so, must be
+ * called after ah->eep_ops->set_board_values() due to RMW of
+ * PHY_SWITCH_CHAIN_0.
+ */
+void ath9k_hw_decrease_chain_power(struct ath_hw *ah,
+				   struct ath9k_channel *chan)
+{
+	int i, regWrites = 0;
+	u32 bank6SelMask;
+	u32 *bank6Temp = ah->bank6Temp;
+
+	BUG_ON(AR_SREV_9280_10_OR_LATER(ah));
+
+	switch (ah->config.diversity_control) {
+	case ATH9K_ANT_FIXED_A:
+		bank6SelMask =
+		    (ah->config.antenna_switch_swap & ANTSWAP_AB) ?
+			REDUCE_CHAIN_0 : /* swapped, reduce chain 0 */
+			REDUCE_CHAIN_1; /* normal, select chain 1/2 to reduce */
+		break;
+	case ATH9K_ANT_FIXED_B:
+		bank6SelMask =
+		    (ah->config.antenna_switch_swap & ANTSWAP_AB) ?
+			REDUCE_CHAIN_1 : /* swapped, reduce chain 1/2 */
+			REDUCE_CHAIN_0; /* normal, select chain 0 to reduce */
+		break;
+	case ATH9K_ANT_VARIABLE:
+		return; /* do not change anything */
+		break;
+	default:
+		return; /* do not change anything */
+		break;
+	}
+
+	for (i = 0; i < ah->iniBank6.ia_rows; i++)
+		bank6Temp[i] = ah->analogBank6Data[i];
+
+	/* Write Bank 5 to switch Bank 6 write to selected chain only */
+	REG_WRITE(ah, AR_PHY_BASE + 0xD8, bank6SelMask);
+
+	/*
+	 * Modify Bank6 selected chain to use lowest amplification.
+	 * Modifies the parameters to a value of 1.
+	 * Depends on existing bank 6 values to be cached in
+	 * ah->analogBank6Data
+	 */
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 189, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 190, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 191, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 192, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 193, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 222, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 245, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 246, 0);
+	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 247, 0);
+
+	REG_WRITE_RF_ARRAY(&ah->iniBank6, bank6Temp, regWrites);
+
+	REG_WRITE(ah, AR_PHY_BASE + 0xD8, 0x00000053);
+#ifdef ALTER_SWITCH
+	REG_WRITE(ah, PHY_SWITCH_CHAIN_0,
+		  (REG_READ(ah, PHY_SWITCH_CHAIN_0) & ~0x38)
+		  | ((REG_READ(ah, PHY_SWITCH_CHAIN_0) >> 3) & 0x38));
+#endif
+}
+
+/**
+ * ath9k_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios
+ * @ah: atheros hardware stucture
+ * @chan:
+ *
+ * For the external AR2133/AR5133 radios, takes the MHz channel value and set
+ * the channel value. Assumes writes enabled to analog bus and bank6 register
+ * cache in ah->analogBank6Data.
+ */
+int ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	u32 channelSel = 0;
+	u32 bModeSynth = 0;
+	u32 aModeRefSel = 0;
+	u32 reg32 = 0;
+	u16 freq;
+	struct chan_centers centers;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = centers.synth_center;
+
+	if (freq < 4800) {
+		u32 txctl;
+
+		if (((freq - 2192) % 5) == 0) {
+			channelSel = ((freq - 672) * 2 - 3040) / 10;
+			bModeSynth = 0;
+		} else if (((freq - 2224) % 5) == 0) {
+			channelSel = ((freq - 704) * 2 - 3040) / 10;
+			bModeSynth = 1;
+		} else {
+			ath_print(common, ATH_DBG_FATAL,
+				  "Invalid channel %u MHz\n", freq);
+			return -EINVAL;
+		}
+
+		channelSel = (channelSel << 2) & 0xff;
+		channelSel = ath9k_hw_reverse_bits(channelSel, 8);
+
+		txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL);
+		if (freq == 2484) {
+
+			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+				  txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
+		} else {
+			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+				  txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN);
+		}
+
+	} else if ((freq % 20) == 0 && freq >= 5120) {
+		channelSel =
+		    ath9k_hw_reverse_bits(((freq - 4800) / 20 << 2), 8);
+		aModeRefSel = ath9k_hw_reverse_bits(1, 2);
+	} else if ((freq % 10) == 0) {
+		channelSel =
+		    ath9k_hw_reverse_bits(((freq - 4800) / 10 << 1), 8);
+		if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah))
+			aModeRefSel = ath9k_hw_reverse_bits(2, 2);
+		else
+			aModeRefSel = ath9k_hw_reverse_bits(1, 2);
+	} else if ((freq % 5) == 0) {
+		channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8);
+		aModeRefSel = ath9k_hw_reverse_bits(1, 2);
+	} else {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Invalid channel %u MHz\n", freq);
+		return -EINVAL;
+	}
+
+	ath9k_hw_force_bias(ah, freq);
+	ath9k_hw_decrease_chain_power(ah, chan);
+
+	reg32 =
+	    (channelSel << 8) | (aModeRefSel << 2) | (bModeSynth << 1) |
+	    (1 << 5) | 0x1;
+
+	REG_WRITE(ah, AR_PHY(0x37), reg32);
+
+	ah->curchan = chan;
+	ah->curchan_rad_index = -1;
+
+	return 0;
+}
+
+/**
+ * ath9k_hw_spur_mitigate - convert baseband spur frequency for external radios
+ * @ah: atheros hardware structure
+ * @chan:
+ *
+ * For non single-chip solutions. Converts to baseband spur frequency given the
+ * input channel frequency and compute register settings below.
+ */
+void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan)
+{
+	int bb_spur = AR_NO_SPUR;
+	int bin, cur_bin;
+	int spur_freq_sd;
+	int spur_delta_phase;
+	int denominator;
+	int upper, lower, cur_vit_mask;
+	int tmp, new;
+	int i;
+	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
+			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
+	};
+	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
+			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
+	};
+	int inc[4] = { 0, 100, 0, 0 };
+
+	int8_t mask_m[123];
+	int8_t mask_p[123];
+	int8_t mask_amt;
+	int tmp_mask;
+	int cur_bb_spur;
+	bool is2GHz = IS_CHAN_2GHZ(chan);
+
+	memset(&mask_m, 0, sizeof(int8_t) * 123);
+	memset(&mask_p, 0, sizeof(int8_t) * 123);
+
+	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
+		cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz);
+		if (AR_NO_SPUR == cur_bb_spur)
+			break;
+		cur_bb_spur = cur_bb_spur - (chan->channel * 10);
+		if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) {
+			bb_spur = cur_bb_spur;
+			break;
+		}
+	}
+
+	if (AR_NO_SPUR == bb_spur)
+		return;
+
+	bin = bb_spur * 32;
+
+	tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
+	new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
+		     AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
+		     AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
+		     AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
+
+	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), new);
+
+	new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
+	       AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
+	       AR_PHY_SPUR_REG_MASK_RATE_SELECT |
+	       AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
+	       SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
+	REG_WRITE(ah, AR_PHY_SPUR_REG, new);
+
+	spur_delta_phase = ((bb_spur * 524288) / 100) &
+		AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+
+	denominator = IS_CHAN_2GHZ(chan) ? 440 : 400;
+	spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff;
+
+	new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
+	       SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
+	       SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
+	REG_WRITE(ah, AR_PHY_TIMING11, new);
+
+	cur_bin = -6000;
+	upper = bin + 100;
+	lower = bin - 100;
+
+	for (i = 0; i < 4; i++) {
+		int pilot_mask = 0;
+		int chan_mask = 0;
+		int bp = 0;
+		for (bp = 0; bp < 30; bp++) {
+			if ((cur_bin > lower) && (cur_bin < upper)) {
+				pilot_mask = pilot_mask | 0x1 << bp;
+				chan_mask = chan_mask | 0x1 << bp;
+			}
+			cur_bin += 100;
+		}
+		cur_bin += inc[i];
+		REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
+		REG_WRITE(ah, chan_mask_reg[i], chan_mask);
+	}
+
+	cur_vit_mask = 6100;
+	upper = bin + 120;
+	lower = bin - 120;
+
+	for (i = 0; i < 123; i++) {
+		if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
+
+			/* workaround for gcc bug #37014 */
+			volatile int tmp_v = abs(cur_vit_mask - bin);
+
+			if (tmp_v < 75)
+				mask_amt = 1;
+			else
+				mask_amt = 0;
+			if (cur_vit_mask < 0)
+				mask_m[abs(cur_vit_mask / 100)] = mask_amt;
+			else
+				mask_p[cur_vit_mask / 100] = mask_amt;
+		}
+		cur_vit_mask -= 100;
+	}
+
+	tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
+		| (mask_m[48] << 26) | (mask_m[49] << 24)
+		| (mask_m[50] << 22) | (mask_m[51] << 20)
+		| (mask_m[52] << 18) | (mask_m[53] << 16)
+		| (mask_m[54] << 14) | (mask_m[55] << 12)
+		| (mask_m[56] << 10) | (mask_m[57] << 8)
+		| (mask_m[58] << 6) | (mask_m[59] << 4)
+		| (mask_m[60] << 2) | (mask_m[61] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
+
+	tmp_mask = (mask_m[31] << 28)
+		| (mask_m[32] << 26) | (mask_m[33] << 24)
+		| (mask_m[34] << 22) | (mask_m[35] << 20)
+		| (mask_m[36] << 18) | (mask_m[37] << 16)
+		| (mask_m[48] << 14) | (mask_m[39] << 12)
+		| (mask_m[40] << 10) | (mask_m[41] << 8)
+		| (mask_m[42] << 6) | (mask_m[43] << 4)
+		| (mask_m[44] << 2) | (mask_m[45] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
+
+	tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
+		| (mask_m[18] << 26) | (mask_m[18] << 24)
+		| (mask_m[20] << 22) | (mask_m[20] << 20)
+		| (mask_m[22] << 18) | (mask_m[22] << 16)
+		| (mask_m[24] << 14) | (mask_m[24] << 12)
+		| (mask_m[25] << 10) | (mask_m[26] << 8)
+		| (mask_m[27] << 6) | (mask_m[28] << 4)
+		| (mask_m[29] << 2) | (mask_m[30] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
+
+	tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28)
+		| (mask_m[2] << 26) | (mask_m[3] << 24)
+		| (mask_m[4] << 22) | (mask_m[5] << 20)
+		| (mask_m[6] << 18) | (mask_m[7] << 16)
+		| (mask_m[8] << 14) | (mask_m[9] << 12)
+		| (mask_m[10] << 10) | (mask_m[11] << 8)
+		| (mask_m[12] << 6) | (mask_m[13] << 4)
+		| (mask_m[14] << 2) | (mask_m[15] << 0);
+	REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
+
+	tmp_mask = (mask_p[15] << 28)
+		| (mask_p[14] << 26) | (mask_p[13] << 24)
+		| (mask_p[12] << 22) | (mask_p[11] << 20)
+		| (mask_p[10] << 18) | (mask_p[9] << 16)
+		| (mask_p[8] << 14) | (mask_p[7] << 12)
+		| (mask_p[6] << 10) | (mask_p[5] << 8)
+		| (mask_p[4] << 6) | (mask_p[3] << 4)
+		| (mask_p[2] << 2) | (mask_p[1] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
+
+	tmp_mask = (mask_p[30] << 28)
+		| (mask_p[29] << 26) | (mask_p[28] << 24)
+		| (mask_p[27] << 22) | (mask_p[26] << 20)
+		| (mask_p[25] << 18) | (mask_p[24] << 16)
+		| (mask_p[23] << 14) | (mask_p[22] << 12)
+		| (mask_p[21] << 10) | (mask_p[20] << 8)
+		| (mask_p[19] << 6) | (mask_p[18] << 4)
+		| (mask_p[17] << 2) | (mask_p[16] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
+
+	tmp_mask = (mask_p[45] << 28)
+		| (mask_p[44] << 26) | (mask_p[43] << 24)
+		| (mask_p[42] << 22) | (mask_p[41] << 20)
+		| (mask_p[40] << 18) | (mask_p[39] << 16)
+		| (mask_p[38] << 14) | (mask_p[37] << 12)
+		| (mask_p[36] << 10) | (mask_p[35] << 8)
+		| (mask_p[34] << 6) | (mask_p[33] << 4)
+		| (mask_p[32] << 2) | (mask_p[31] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
+
+	tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
+		| (mask_p[59] << 26) | (mask_p[58] << 24)
+		| (mask_p[57] << 22) | (mask_p[56] << 20)
+		| (mask_p[55] << 18) | (mask_p[54] << 16)
+		| (mask_p[53] << 14) | (mask_p[52] << 12)
+		| (mask_p[51] << 10) | (mask_p[50] << 8)
+		| (mask_p[49] << 6) | (mask_p[48] << 4)
+		| (mask_p[47] << 2) | (mask_p[46] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
+}
+
+/**
+ * ath9k_hw_rf_alloc_ext_banks - allocates banks for external radio programming
+ * @ah: atheros hardware structure
+ *
+ * Only required for older devices with external AR2133/AR5133 radios.
+ */
+int ath9k_hw_rf_alloc_ext_banks(struct ath_hw *ah)
+{
+#define ATH_ALLOC_BANK(bank, size) do { \
+		bank = kzalloc((sizeof(u32) * size), GFP_KERNEL); \
+		if (!bank) { \
+			ath_print(common, ATH_DBG_FATAL, \
+				  "Cannot allocate RF banks\n"); \
+			return -ENOMEM; \
+		} \
+	} while (0);
+
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	BUG_ON(AR_SREV_9280_10_OR_LATER(ah));
+
+	ATH_ALLOC_BANK(ah->analogBank0Data, ah->iniBank0.ia_rows);
+	ATH_ALLOC_BANK(ah->analogBank1Data, ah->iniBank1.ia_rows);
+	ATH_ALLOC_BANK(ah->analogBank2Data, ah->iniBank2.ia_rows);
+	ATH_ALLOC_BANK(ah->analogBank3Data, ah->iniBank3.ia_rows);
+	ATH_ALLOC_BANK(ah->analogBank6Data, ah->iniBank6.ia_rows);
+	ATH_ALLOC_BANK(ah->analogBank6TPCData, ah->iniBank6TPC.ia_rows);
+	ATH_ALLOC_BANK(ah->analogBank7Data, ah->iniBank7.ia_rows);
+	ATH_ALLOC_BANK(ah->addac5416_21,
+		       ah->iniAddac.ia_rows * ah->iniAddac.ia_columns);
+	ATH_ALLOC_BANK(ah->bank6Temp, ah->iniBank6.ia_rows);
+
+	return 0;
+#undef ATH_ALLOC_BANK
+}
+
+
+/**
+ * ath9k_hw_rf_free_ext_banks - Free memory for analog bank scratch buffers
+ * @ah: atheros hardware struture
+ * For the external AR2133/AR5133 radios banks.
+ */
+void
+ath9k_hw_rf_free_ext_banks(struct ath_hw *ah)
+{
+#define ATH_FREE_BANK(bank) do { \
+		kfree(bank); \
+		bank = NULL; \
+	} while (0);
+
+	BUG_ON(AR_SREV_9280_10_OR_LATER(ah));
+
+	ATH_FREE_BANK(ah->analogBank0Data);
+	ATH_FREE_BANK(ah->analogBank1Data);
+	ATH_FREE_BANK(ah->analogBank2Data);
+	ATH_FREE_BANK(ah->analogBank3Data);
+	ATH_FREE_BANK(ah->analogBank6Data);
+	ATH_FREE_BANK(ah->analogBank6TPCData);
+	ATH_FREE_BANK(ah->analogBank7Data);
+	ATH_FREE_BANK(ah->addac5416_21);
+	ATH_FREE_BANK(ah->bank6Temp);
+
+#undef ATH_FREE_BANK
+}
+
+/* *
+ * ath9k_hw_set_rf_regs - programs rf registers based on EEPROM
+ * @ah: atheros hardware structure
+ * @chan:
+ * @modesIndex:
+ *
+ * Used for the external AR2133/AR5133 radios.
+ *
+ * Reads the EEPROM header info from the device structure and programs
+ * all rf registers. This routine requires access to the analog
+ * rf device. This is not required for single-chip devices.
+ */
+bool ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan,
+			  u16 modesIndex)
 {
 	u32 eepMinorRev;
 	u32 ob5GHz = 0, db5GHz = 0;
 	u32 ob2GHz = 0, db2GHz = 0;
 	int regWrites = 0;
 
+	/*
+	 * Software does not need to program bank data
+	 * for single chip devices, that is AR9280 or anything
+	 * after that.
+	 */
 	if (AR_SREV_9280_10_OR_LATER(ah))
 		return true;
 
+	/* Setup rf parameters */
 	eepMinorRev = ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV);
 
+	/* Setup Bank 0 Write */
 	RF_BANK_SETUP(ah->analogBank0Data, &ah->iniBank0, 1);
 
+	/* Setup Bank 1 Write */
 	RF_BANK_SETUP(ah->analogBank1Data, &ah->iniBank1, 1);
 
+	/* Setup Bank 2 Write */
 	RF_BANK_SETUP(ah->analogBank2Data, &ah->iniBank2, 1);
 
+	/* Setup Bank 6 Write */
 	RF_BANK_SETUP(ah->analogBank3Data, &ah->iniBank3,
 		      modesIndex);
 	{
@@ -239,6 +1026,7 @@ ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan,
 		}
 	}
 
+	/* Only the 5 or 2 GHz OB/DB need to be set for a mode */
 	if (eepMinorRev >= 2) {
 		if (IS_CHAN_2GHZ(chan)) {
 			ob2GHz = ah->eep_ops->get_eeprom(ah, EEP_OB_2);
@@ -257,8 +1045,10 @@ ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan,
 		}
 	}
 
+	/* Setup Bank 7 Setup */
 	RF_BANK_SETUP(ah->analogBank7Data, &ah->iniBank7, 1);
 
+	/* Write Analog registers */
 	REG_WRITE_RF_ARRAY(&ah->iniBank0, ah->analogBank0Data,
 			   regWrites);
 	REG_WRITE_RF_ARRAY(&ah->iniBank1, ah->analogBank1Data,
@@ -274,139 +1064,3 @@ ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan,
 
 	return true;
 }
-
-void
-ath9k_hw_rf_free(struct ath_hw *ah)
-{
-#define ATH_FREE_BANK(bank) do { \
-		kfree(bank); \
-		bank = NULL; \
-	} while (0);
-
-	ATH_FREE_BANK(ah->analogBank0Data);
-	ATH_FREE_BANK(ah->analogBank1Data);
-	ATH_FREE_BANK(ah->analogBank2Data);
-	ATH_FREE_BANK(ah->analogBank3Data);
-	ATH_FREE_BANK(ah->analogBank6Data);
-	ATH_FREE_BANK(ah->analogBank6TPCData);
-	ATH_FREE_BANK(ah->analogBank7Data);
-	ATH_FREE_BANK(ah->addac5416_21);
-	ATH_FREE_BANK(ah->bank6Temp);
-#undef ATH_FREE_BANK
-}
-
-bool ath9k_hw_init_rf(struct ath_hw *ah, int *status)
-{
-	struct ath_common *common = ath9k_hw_common(ah);
-
-	if (!AR_SREV_9280_10_OR_LATER(ah)) {
-		ah->analogBank0Data =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank0.ia_rows), GFP_KERNEL);
-		ah->analogBank1Data =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank1.ia_rows), GFP_KERNEL);
-		ah->analogBank2Data =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank2.ia_rows), GFP_KERNEL);
-		ah->analogBank3Data =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank3.ia_rows), GFP_KERNEL);
-		ah->analogBank6Data =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank6.ia_rows), GFP_KERNEL);
-		ah->analogBank6TPCData =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank6TPC.ia_rows), GFP_KERNEL);
-		ah->analogBank7Data =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank7.ia_rows), GFP_KERNEL);
-
-		if (ah->analogBank0Data == NULL
-		    || ah->analogBank1Data == NULL
-		    || ah->analogBank2Data == NULL
-		    || ah->analogBank3Data == NULL
-		    || ah->analogBank6Data == NULL
-		    || ah->analogBank6TPCData == NULL
-		    || ah->analogBank7Data == NULL) {
-			ath_print(common, ATH_DBG_FATAL,
-				  "Cannot allocate RF banks\n");
-			*status = -ENOMEM;
-			return false;
-		}
-
-		ah->addac5416_21 =
-		    kzalloc((sizeof(u32) *
-			     ah->iniAddac.ia_rows *
-			     ah->iniAddac.ia_columns), GFP_KERNEL);
-		if (ah->addac5416_21 == NULL) {
-			ath_print(common, ATH_DBG_FATAL,
-				  "Cannot allocate addac5416_21\n");
-			*status = -ENOMEM;
-			return false;
-		}
-
-		ah->bank6Temp =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank6.ia_rows), GFP_KERNEL);
-		if (ah->bank6Temp == NULL) {
-			ath_print(common, ATH_DBG_FATAL,
-				  "Cannot allocate bank6Temp\n");
-			*status = -ENOMEM;
-			return false;
-		}
-	}
-
-	return true;
-}
-
-void
-ath9k_hw_decrease_chain_power(struct ath_hw *ah, struct ath9k_channel *chan)
-{
-	int i, regWrites = 0;
-	u32 bank6SelMask;
-	u32 *bank6Temp = ah->bank6Temp;
-
-	switch (ah->config.diversity_control) {
-	case ATH9K_ANT_FIXED_A:
-		bank6SelMask =
-		    (ah->config.antenna_switch_swap & ANTSWAP_AB) ?
-			REDUCE_CHAIN_0 : REDUCE_CHAIN_1;
-		break;
-	case ATH9K_ANT_FIXED_B:
-		bank6SelMask =
-		    (ah->config.antenna_switch_swap & ANTSWAP_AB) ?
-			REDUCE_CHAIN_1 : REDUCE_CHAIN_0;
-		break;
-	case ATH9K_ANT_VARIABLE:
-		return;
-		break;
-	default:
-		return;
-		break;
-	}
-
-	for (i = 0; i < ah->iniBank6.ia_rows; i++)
-		bank6Temp[i] = ah->analogBank6Data[i];
-
-	REG_WRITE(ah, AR_PHY_BASE + 0xD8, bank6SelMask);
-
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 189, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 190, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 191, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 192, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 193, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 222, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 245, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 246, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 247, 0);
-
-	REG_WRITE_RF_ARRAY(&ah->iniBank6, bank6Temp, regWrites);
-
-	REG_WRITE(ah, AR_PHY_BASE + 0xD8, 0x00000053);
-#ifdef ALTER_SWITCH
-	REG_WRITE(ah, PHY_SWITCH_CHAIN_0,
-		  (REG_READ(ah, PHY_SWITCH_CHAIN_0) & ~0x38)
-		  | ((REG_READ(ah, PHY_SWITCH_CHAIN_0) >> 3) & 0x38));
-#endif
-}
diff --git a/drivers/net/wireless/ath/ath9k/phy.h b/drivers/net/wireless/ath/ath9k/phy.h
index 140fef74c66..dc145a135dc 100644
--- a/drivers/net/wireless/ath/ath9k/phy.h
+++ b/drivers/net/wireless/ath/ath9k/phy.h
@@ -17,20 +17,26 @@
 #ifndef PHY_H
 #define PHY_H
 
-void ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
-				 struct ath9k_channel
-				 *chan);
-bool ath9k_hw_set_channel(struct ath_hw *ah,
-			  struct ath9k_channel *chan);
-void ath9k_hw_write_regs(struct ath_hw *ah, u32 modesIndex,
-			 u32 freqIndex, int regWrites);
+/* Common between single chip and non single-chip solutions */
+void ath9k_hw_write_regs(struct ath_hw *ah, u32 freqIndex, int regWrites);
+
+/* Single chip radio settings */
+int ath9k_hw_ar9280_set_channel(struct ath_hw *ah, struct ath9k_channel *chan);
+void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan);
+
+/* Routines below are for non single-chip solutions */
+int ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan);
+void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan);
+
+int ath9k_hw_rf_alloc_ext_banks(struct ath_hw *ah);
+void ath9k_hw_rf_free_ext_banks(struct ath_hw *ah);
+
 bool ath9k_hw_set_rf_regs(struct ath_hw *ah,
 			  struct ath9k_channel *chan,
 			  u16 modesIndex);
+
 void ath9k_hw_decrease_chain_power(struct ath_hw *ah,
 				   struct ath9k_channel *chan);
-bool ath9k_hw_init_rf(struct ath_hw *ah,
-		      int *status);
 
 #define AR_PHY_BASE     0x9800
 #define AR_PHY(_n)      (AR_PHY_BASE + ((_n)<<2))
@@ -186,8 +192,20 @@ bool ath9k_hw_init_rf(struct ath_hw *ah,
 #define AR_PHY_PLL_CTL_44_2133  0xeb
 #define AR_PHY_PLL_CTL_40_2133  0xea
 
-#define AR_PHY_SPECTRAL_SCAN		0x9912
-#define AR_PHY_SPECTRAL_SCAN_ENABLE	0x1
+#define AR_PHY_SPECTRAL_SCAN			0x9910  /* AR9280 spectral scan configuration register */
+#define	AR_PHY_SPECTRAL_SCAN_ENABLE		0x1
+#define AR_PHY_SPECTRAL_SCAN_ENA		0x00000001  /* Enable spectral scan, reg 68, bit 0 */
+#define AR_PHY_SPECTRAL_SCAN_ENA_S		0  /* Enable spectral scan, reg 68, bit 0 */
+#define AR_PHY_SPECTRAL_SCAN_ACTIVE		0x00000002  /* Activate spectral scan reg 68, bit 1*/
+#define AR_PHY_SPECTRAL_SCAN_ACTIVE_S		1  /* Activate spectral scan reg 68, bit 1*/
+#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD		0x000000F0  /* Interval for FFT reports, reg 68, bits 4-7*/
+#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD_S	4
+#define AR_PHY_SPECTRAL_SCAN_PERIOD		0x0000FF00  /* Interval for FFT reports, reg 68, bits 8-15*/
+#define AR_PHY_SPECTRAL_SCAN_PERIOD_S		8
+#define AR_PHY_SPECTRAL_SCAN_COUNT		0x00FF0000  /* Number of reports, reg 68, bits 16-23*/
+#define AR_PHY_SPECTRAL_SCAN_COUNT_S		16
+#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT	0x01000000  /* Short repeat, reg 68, bit 24*/
+#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT_S	24  /* Short repeat, reg 68, bit 24*/
 
 #define AR_PHY_RX_DELAY           0x9914
 #define AR_PHY_SEARCH_START_DELAY 0x9918
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index c880a55939b..355dd1834e1 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -202,7 +202,8 @@ static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds,
 	}
 
 	rcu_read_lock();
-	sta = ieee80211_find_sta(sc->hw, hdr->addr2);
+	/* XXX: use ieee80211_find_sta! */
+	sta = ieee80211_find_sta_by_hw(sc->hw, hdr->addr2);
 	if (sta) {
 		an = (struct ath_node *) sta->drv_priv;
 		if (ds->ds_rxstat.rs_rssi != ATH9K_RSSI_BAD &&
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index ceed0095efa..061e12ce0b2 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -1704,4 +1704,7 @@ enum {
 #define AR_KEYTABLE_MAC0(_n)    (AR_KEYTABLE(_n) + 24)
 #define AR_KEYTABLE_MAC1(_n)    (AR_KEYTABLE(_n) + 28)
 
+#define AR9271_CORE_CLOCK	117   /* clock to 117Mhz */
+#define AR9271_TARGET_BAUD_RATE	19200 /* 115200 */
+
 #endif
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 2a4efcbced6..8e052f406c3 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -282,7 +282,8 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 
 	rcu_read_lock();
 
-	sta = ieee80211_find_sta(sc->hw, hdr->addr1);
+	/* XXX: use ieee80211_find_sta! */
+	sta = ieee80211_find_sta_by_hw(sc->hw, hdr->addr1);
 	if (!sta) {
 		rcu_read_unlock();
 		return;
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 54ea61c15d8..64c12e1bced 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -1,6 +1,6 @@
 config B43
 	tristate "Broadcom 43xx wireless support (mac80211 stack)"
-	depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
+	depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
 	select SSB
 	select FW_LOADER
 	---help---
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 65b23f725a0..fe3bf949199 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -26,8 +26,6 @@
 # define B43_DEBUG	0
 #endif
 
-#define B43_RX_MAX_SSI			60
-
 /* MMIO offsets */
 #define B43_MMIO_DMA0_REASON		0x20
 #define B43_MMIO_DMA0_IRQ_MASK		0x24
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index ed6e96a3474..c806924c7b5 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3573,7 +3573,7 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	if (conf->channel->hw_value != phy->channel)
 		b43_switch_channel(dev, conf->channel->hw_value);
 
-	dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
+	dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR);
 
 	/* Adjust the desired TX power level. */
 	if (conf->power_level != 0) {
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index c6987b147af..3e046ec1ff8 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -67,6 +67,7 @@ static void b43_lpphy_op_prepare_structs(struct b43_wldev *dev)
 	struct b43_phy_lp *lpphy = phy->lp;
 
 	memset(lpphy, 0, sizeof(*lpphy));
+	lpphy->antenna = B43_ANTENNA_DEFAULT;
 
 	//TODO
 }
@@ -379,8 +380,6 @@ static void lpphy_save_dig_flt_state(struct b43_wldev *dev)
 	}
 }
 
-/* lpphy_restore_dig_flt_state is unused but kept as a reference */
-#if 0
 static void lpphy_restore_dig_flt_state(struct b43_wldev *dev)
 {
 	static const u16 addr[] = {
@@ -401,7 +400,6 @@ static void lpphy_restore_dig_flt_state(struct b43_wldev *dev)
 	for (i = 0; i < ARRAY_SIZE(addr); i++)
 		b43_phy_write(dev, addr[i], lpphy->dig_flt_state[i]);
 }
-#endif
 
 static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
 {
@@ -754,11 +752,17 @@ static void lpphy_clear_deaf(struct b43_wldev *dev, bool user)
 	}
 }
 
+static void lpphy_set_trsw_over(struct b43_wldev *dev, bool tx, bool rx)
+{
+	u16 trsw = (tx << 1) | rx;
+	b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFC, trsw);
+	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x3);
+}
+
 static void lpphy_disable_crs(struct b43_wldev *dev, bool user)
 {
 	lpphy_set_deaf(dev, user);
-	b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFC, 0x1);
-	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x3);
+	lpphy_set_trsw_over(dev, false, true);
 	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFB);
 	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x4);
 	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFF7);
@@ -793,6 +797,60 @@ static void lpphy_restore_crs(struct b43_wldev *dev, bool user)
 
 struct lpphy_tx_gains { u16 gm, pga, pad, dac; };
 
+static void lpphy_disable_rx_gain_override(struct b43_wldev *dev)
+{
+	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFFE);
+	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFEF);
+	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFBF);
+	if (dev->phy.rev >= 2) {
+		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF);
+		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFBFF);
+			b43_phy_mask(dev, B43_PHY_OFDM(0xE5), 0xFFF7);
+		}
+	} else {
+		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFDFF);
+	}
+}
+
+static void lpphy_enable_rx_gain_override(struct b43_wldev *dev)
+{
+	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1);
+	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x10);
+	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x40);
+	if (dev->phy.rev >= 2) {
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x100);
+		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+			b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x400);
+			b43_phy_set(dev, B43_PHY_OFDM(0xE5), 0x8);
+		}
+	} else {
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x200);
+	}
+}
+
+static void lpphy_disable_tx_gain_override(struct b43_wldev *dev)
+{
+	if (dev->phy.rev < 2)
+		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF);
+	else {
+		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFF7F);
+		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xBFFF);
+	}
+	b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFBF);
+}
+
+static void lpphy_enable_tx_gain_override(struct b43_wldev *dev)
+{
+	if (dev->phy.rev < 2)
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x100);
+	else {
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x80);
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x4000);
+	}
+	b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 0x40);
+}
+
 static struct lpphy_tx_gains lpphy_get_tx_gains(struct b43_wldev *dev)
 {
 	struct lpphy_tx_gains gains;
@@ -822,6 +880,17 @@ static void lpphy_set_dac_gain(struct b43_wldev *dev, u16 dac)
 	b43_phy_maskset(dev, B43_LPPHY_AFE_DAC_CTL, 0xF000, ctl);
 }
 
+static u16 lpphy_get_pa_gain(struct b43_wldev *dev)
+{
+	return b43_phy_read(dev, B43_PHY_OFDM(0xFB)) & 0x7F;
+}
+
+static void lpphy_set_pa_gain(struct b43_wldev *dev, u16 gain)
+{
+	b43_phy_maskset(dev, B43_PHY_OFDM(0xFB), 0xE03F, gain << 6);
+	b43_phy_maskset(dev, B43_PHY_OFDM(0xFD), 0x80FF, gain << 8);
+}
+
 static void lpphy_set_tx_gains(struct b43_wldev *dev,
 			       struct lpphy_tx_gains gains)
 {
@@ -832,25 +901,22 @@ static void lpphy_set_tx_gains(struct b43_wldev *dev,
 		b43_phy_maskset(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL,
 				0xF800, rf_gain);
 	} else {
-		pa_gain = b43_phy_read(dev, B43_PHY_OFDM(0xFB)) & 0x1FC0;
-		pa_gain <<= 2;
+		pa_gain = lpphy_get_pa_gain(dev);
 		b43_phy_write(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL,
 			      (gains.pga << 8) | gains.gm);
+		/*
+		 * SPEC FIXME The spec calls for (pa_gain << 8) here, but that
+		 * conflicts with the spec for set_pa_gain! Vendor driver bug?
+		 */
 		b43_phy_maskset(dev, B43_PHY_OFDM(0xFB),
-				0x8000, gains.pad | pa_gain);
+				0x8000, gains.pad | (pa_gain << 6));
 		b43_phy_write(dev, B43_PHY_OFDM(0xFC),
 			      (gains.pga << 8) | gains.gm);
 		b43_phy_maskset(dev, B43_PHY_OFDM(0xFD),
-				0x8000, gains.pad | pa_gain);
+				0x8000, gains.pad | (pa_gain << 8));
 	}
 	lpphy_set_dac_gain(dev, gains.dac);
-	if (dev->phy.rev < 2) {
-		b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF, 1 << 8);
-	} else {
-		b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFF7F, 1 << 7);
-		b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xBFFF, 1 << 14);
-	}
-	b43_phy_maskset(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFBF, 1 << 6);
+	lpphy_enable_tx_gain_override(dev);
 }
 
 static void lpphy_rev0_1_set_rx_gain(struct b43_wldev *dev, u32 gain)
@@ -890,41 +956,6 @@ static void lpphy_rev2plus_set_rx_gain(struct b43_wldev *dev, u32 gain)
 	}
 }
 
-/* lpphy_disable_rx_gain_override is unused but kept as a reference */
-#if 0
-static void lpphy_disable_rx_gain_override(struct b43_wldev *dev)
-{
-	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFFE);
-	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFEF);
-	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFBF);
-	if (dev->phy.rev >= 2) {
-		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF);
-		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
-			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFBFF);
-			b43_phy_mask(dev, B43_PHY_OFDM(0xE5), 0xFFF7);
-		}
-	} else {
-		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFDFF);
-	}
-}
-#endif
-
-static void lpphy_enable_rx_gain_override(struct b43_wldev *dev)
-{
-	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1);
-	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x10);
-	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x40);
-	if (dev->phy.rev >= 2) {
-		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x100);
-		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
-			b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x400);
-			b43_phy_set(dev, B43_PHY_OFDM(0xE5), 0x8);
-		}
-	} else {
-		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x200);
-	}
-}
-
 static void lpphy_set_rx_gain(struct b43_wldev *dev, u32 gain)
 {
 	if (dev->phy.rev < 2)
@@ -1009,8 +1040,7 @@ static int lpphy_loopback(struct b43_wldev *dev)
 
 	memset(&iq_est, 0, sizeof(iq_est));
 
-	b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFC, 0x3);
-	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x3);
+	lpphy_set_trsw_over(dev, true, true);
 	b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 1);
 	b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xFFFE);
 	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x800);
@@ -1132,7 +1162,7 @@ static void lpphy_set_tx_power_control(struct b43_wldev *dev,
 			b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM,
 					0x8FFF, ((u16)lpphy->tssi_npt << 16));
 			//TODO Set "TSSI Transmit Count" variable to total transmitted frame count
-			//TODO Disable TX gain override
+			lpphy_disable_tx_gain_override(dev);
 			lpphy->tx_pwr_idx_over = -1;
 		}
 	}
@@ -1318,15 +1348,73 @@ static void lpphy_calibrate_rc(struct b43_wldev *dev)
 	}
 }
 
+static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
+{
+	if (dev->phy.rev >= 2)
+		return; // rev2+ doesn't support antenna diversity
+
+	if (B43_WARN_ON(antenna > B43_ANTENNA_AUTO1))
+		return;
+
+	b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_ANTDIVHELP);
+
+	b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFD, antenna & 0x2);
+	b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFE, antenna & 0x1);
+
+	b43_hf_write(dev, b43_hf_read(dev) | B43_HF_ANTDIVHELP);
+
+	dev->phy.lp->antenna = antenna;
+}
+
+static void lpphy_set_tx_iqcc(struct b43_wldev *dev, u16 a, u16 b)
+{
+	u16 tmp[2];
+
+	tmp[0] = a;
+	tmp[1] = b;
+	b43_lptab_write_bulk(dev, B43_LPTAB16(0, 80), 2, tmp);
+}
+
 static void lpphy_set_tx_power_by_index(struct b43_wldev *dev, u8 index)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;
+	struct lpphy_tx_gains gains;
+	u32 iq_comp, tx_gain, coeff, rf_power;
 
 	lpphy->tx_pwr_idx_over = index;
+	lpphy_read_tx_pctl_mode_from_hardware(dev);
 	if (lpphy->txpctl_mode != B43_LPPHY_TXPCTL_OFF)
 		lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_SW);
-
-	//TODO
+	if (dev->phy.rev >= 2) {
+		iq_comp = b43_lptab_read(dev, B43_LPTAB32(7, index + 320));
+		tx_gain = b43_lptab_read(dev, B43_LPTAB32(7, index + 192));
+		gains.pad = (tx_gain >> 16) & 0xFF;
+		gains.gm = tx_gain & 0xFF;
+		gains.pga = (tx_gain >> 8) & 0xFF;
+		gains.dac = (iq_comp >> 28) & 0xFF;
+		lpphy_set_tx_gains(dev, gains);
+	} else {
+		iq_comp = b43_lptab_read(dev, B43_LPTAB32(10, index + 320));
+		tx_gain = b43_lptab_read(dev, B43_LPTAB32(10, index + 192));
+		b43_phy_maskset(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL,
+				0xF800, (tx_gain >> 4) & 0x7FFF);
+		lpphy_set_dac_gain(dev, tx_gain & 0x7);
+		lpphy_set_pa_gain(dev, (tx_gain >> 24) & 0x7F);
+	}
+	lpphy_set_bb_mult(dev, (iq_comp >> 20) & 0xFF);
+	lpphy_set_tx_iqcc(dev, (iq_comp >> 10) & 0x3FF, iq_comp & 0x3FF);
+	if (dev->phy.rev >= 2) {
+		coeff = b43_lptab_read(dev, B43_LPTAB32(7, index + 448));
+	} else {
+		coeff = b43_lptab_read(dev, B43_LPTAB32(10, index + 448));
+	}
+	b43_lptab_write(dev, B43_LPTAB16(0, 85), coeff & 0xFFFF);
+	if (dev->phy.rev >= 2) {
+		rf_power = b43_lptab_read(dev, B43_LPTAB32(7, index + 576));
+		b43_phy_maskset(dev, B43_LPPHY_RF_PWR_OVERRIDE, 0xFF00,
+				rf_power & 0xFFFF);//SPEC FIXME mask & set != 0
+	}
+	lpphy_enable_tx_gain_override(dev);
 }
 
 static void lpphy_btcoex_override(struct b43_wldev *dev)
@@ -1335,58 +1423,45 @@ static void lpphy_btcoex_override(struct b43_wldev *dev)
 	b43_write16(dev, B43_MMIO_BTCOEX_TXCTL, 0xFF);
 }
 
-static void lpphy_pr41573_workaround(struct b43_wldev *dev)
+static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev,
+					 bool blocked)
 {
-	struct b43_phy_lp *lpphy = dev->phy.lp;
-	u32 *saved_tab;
-	const unsigned int saved_tab_size = 256;
-	enum b43_lpphy_txpctl_mode txpctl_mode;
-	s8 tx_pwr_idx_over;
-	u16 tssi_npt, tssi_idx;
-
-	saved_tab = kcalloc(saved_tab_size, sizeof(saved_tab[0]), GFP_KERNEL);
-	if (!saved_tab) {
-		b43err(dev->wl, "PR41573 failed. Out of memory!\n");
-		return;
-	}
-
-	lpphy_read_tx_pctl_mode_from_hardware(dev);
-	txpctl_mode = lpphy->txpctl_mode;
-	tx_pwr_idx_over = lpphy->tx_pwr_idx_over;
-	tssi_npt = lpphy->tssi_npt;
-	tssi_idx = lpphy->tssi_idx;
-
-	if (dev->phy.rev < 2) {
-		b43_lptab_read_bulk(dev, B43_LPTAB32(10, 0x140),
-				    saved_tab_size, saved_tab);
+	//TODO check MAC control register
+	if (blocked) {
+		if (dev->phy.rev >= 2) {
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x83FF);
+			b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1F00);
+			b43_phy_mask(dev, B43_LPPHY_AFE_DDFS, 0x80FF);
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xDFFF);
+			b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x0808);
+		} else {
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xE0FF);
+			b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1F00);
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFCFF);
+			b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x0018);
+		}
 	} else {
-		b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140),
-				    saved_tab_size, saved_tab);
+		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xE0FF);
+		if (dev->phy.rev >= 2)
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xF7F7);
+		else
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFFE7);
 	}
-	//TODO
-
-	kfree(saved_tab);
 }
 
-static void lpphy_calibration(struct b43_wldev *dev)
+/* This was previously called lpphy_japan_filter */
+static void lpphy_set_analog_filter(struct b43_wldev *dev, int channel)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;
-	enum b43_lpphy_txpctl_mode saved_pctl_mode;
-
-	b43_mac_suspend(dev);
-
-	lpphy_btcoex_override(dev);
-	lpphy_read_tx_pctl_mode_from_hardware(dev);
-	saved_pctl_mode = lpphy->txpctl_mode;
-	lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
-	//TODO Perform transmit power table I/Q LO calibration
-	if ((dev->phy.rev == 0) && (saved_pctl_mode != B43_LPPHY_TXPCTL_OFF))
-		lpphy_pr41573_workaround(dev);
-	//TODO If a full calibration has not been performed on this channel yet, perform PAPD TX-power calibration
-	lpphy_set_tx_power_control(dev, saved_pctl_mode);
-	//TODO Perform I/Q calibration with a single control value set
+	u16 tmp = (channel == 14); //SPEC FIXME check japanwidefilter!
 
-	b43_mac_enable(dev);
+	if (dev->phy.rev < 2) { //SPEC FIXME Isn't this rev0/1-specific?
+		b43_phy_maskset(dev, B43_LPPHY_LP_PHY_CTL, 0xFCFF, tmp << 9);
+		if ((dev->phy.rev == 1) && (lpphy->rc_cap))
+			lpphy_set_rc_cap(dev);
+	} else {
+		b43_radio_write(dev, B2063_TX_BB_SP3, 0x3F);
+	}
 }
 
 static void lpphy_set_tssi_mux(struct b43_wldev *dev, enum tssi_mux_mode mode)
@@ -1495,6 +1570,473 @@ static void lpphy_tx_pctl_init(struct b43_wldev *dev)
 	}
 }
 
+static void lpphy_pr41573_workaround(struct b43_wldev *dev)
+{
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+	u32 *saved_tab;
+	const unsigned int saved_tab_size = 256;
+	enum b43_lpphy_txpctl_mode txpctl_mode;
+	s8 tx_pwr_idx_over;
+	u16 tssi_npt, tssi_idx;
+
+	saved_tab = kcalloc(saved_tab_size, sizeof(saved_tab[0]), GFP_KERNEL);
+	if (!saved_tab) {
+		b43err(dev->wl, "PR41573 failed. Out of memory!\n");
+		return;
+	}
+
+	lpphy_read_tx_pctl_mode_from_hardware(dev);
+	txpctl_mode = lpphy->txpctl_mode;
+	tx_pwr_idx_over = lpphy->tx_pwr_idx_over;
+	tssi_npt = lpphy->tssi_npt;
+	tssi_idx = lpphy->tssi_idx;
+
+	if (dev->phy.rev < 2) {
+		b43_lptab_read_bulk(dev, B43_LPTAB32(10, 0x140),
+				    saved_tab_size, saved_tab);
+	} else {
+		b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140),
+				    saved_tab_size, saved_tab);
+	}
+	//FIXME PHY reset
+	lpphy_table_init(dev); //FIXME is table init needed?
+	lpphy_baseband_init(dev);
+	lpphy_tx_pctl_init(dev);
+	b43_lpphy_op_software_rfkill(dev, false);
+	lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
+	if (dev->phy.rev < 2) {
+		b43_lptab_write_bulk(dev, B43_LPTAB32(10, 0x140),
+				     saved_tab_size, saved_tab);
+	} else {
+		b43_lptab_write_bulk(dev, B43_LPTAB32(7, 0x140),
+				     saved_tab_size, saved_tab);
+	}
+	b43_write16(dev, B43_MMIO_CHANNEL, lpphy->channel);
+	lpphy->tssi_npt = tssi_npt;
+	lpphy->tssi_idx = tssi_idx;
+	lpphy_set_analog_filter(dev, lpphy->channel);
+	if (tx_pwr_idx_over != -1)
+		lpphy_set_tx_power_by_index(dev, tx_pwr_idx_over);
+	if (lpphy->rc_cap)
+		lpphy_set_rc_cap(dev);
+	b43_lpphy_op_set_rx_antenna(dev, lpphy->antenna);
+	lpphy_set_tx_power_control(dev, txpctl_mode);
+	kfree(saved_tab);
+}
+
+struct lpphy_rx_iq_comp { u8 chan; s8 c1, c0; };
+
+static const struct lpphy_rx_iq_comp lpphy_5354_iq_table[] = {
+	{ .chan = 1, .c1 = -66, .c0 = 15, },
+	{ .chan = 2, .c1 = -66, .c0 = 15, },
+	{ .chan = 3, .c1 = -66, .c0 = 15, },
+	{ .chan = 4, .c1 = -66, .c0 = 15, },
+	{ .chan = 5, .c1 = -66, .c0 = 15, },
+	{ .chan = 6, .c1 = -66, .c0 = 15, },
+	{ .chan = 7, .c1 = -66, .c0 = 14, },
+	{ .chan = 8, .c1 = -66, .c0 = 14, },
+	{ .chan = 9, .c1 = -66, .c0 = 14, },
+	{ .chan = 10, .c1 = -66, .c0 = 14, },
+	{ .chan = 11, .c1 = -66, .c0 = 14, },
+	{ .chan = 12, .c1 = -66, .c0 = 13, },
+	{ .chan = 13, .c1 = -66, .c0 = 13, },
+	{ .chan = 14, .c1 = -66, .c0 = 13, },
+};
+
+static const struct lpphy_rx_iq_comp lpphy_rev0_1_iq_table[] = {
+	{ .chan = 1, .c1 = -64, .c0 = 13, },
+	{ .chan = 2, .c1 = -64, .c0 = 13, },
+	{ .chan = 3, .c1 = -64, .c0 = 13, },
+	{ .chan = 4, .c1 = -64, .c0 = 13, },
+	{ .chan = 5, .c1 = -64, .c0 = 12, },
+	{ .chan = 6, .c1 = -64, .c0 = 12, },
+	{ .chan = 7, .c1 = -64, .c0 = 12, },
+	{ .chan = 8, .c1 = -64, .c0 = 12, },
+	{ .chan = 9, .c1 = -64, .c0 = 12, },
+	{ .chan = 10, .c1 = -64, .c0 = 11, },
+	{ .chan = 11, .c1 = -64, .c0 = 11, },
+	{ .chan = 12, .c1 = -64, .c0 = 11, },
+	{ .chan = 13, .c1 = -64, .c0 = 11, },
+	{ .chan = 14, .c1 = -64, .c0 = 10, },
+	{ .chan = 34, .c1 = -62, .c0 = 24, },
+	{ .chan = 38, .c1 = -62, .c0 = 24, },
+	{ .chan = 42, .c1 = -62, .c0 = 24, },
+	{ .chan = 46, .c1 = -62, .c0 = 23, },
+	{ .chan = 36, .c1 = -62, .c0 = 24, },
+	{ .chan = 40, .c1 = -62, .c0 = 24, },
+	{ .chan = 44, .c1 = -62, .c0 = 23, },
+	{ .chan = 48, .c1 = -62, .c0 = 23, },
+	{ .chan = 52, .c1 = -62, .c0 = 23, },
+	{ .chan = 56, .c1 = -62, .c0 = 22, },
+	{ .chan = 60, .c1 = -62, .c0 = 22, },
+	{ .chan = 64, .c1 = -62, .c0 = 22, },
+	{ .chan = 100, .c1 = -62, .c0 = 16, },
+	{ .chan = 104, .c1 = -62, .c0 = 16, },
+	{ .chan = 108, .c1 = -62, .c0 = 15, },
+	{ .chan = 112, .c1 = -62, .c0 = 14, },
+	{ .chan = 116, .c1 = -62, .c0 = 14, },
+	{ .chan = 120, .c1 = -62, .c0 = 13, },
+	{ .chan = 124, .c1 = -62, .c0 = 12, },
+	{ .chan = 128, .c1 = -62, .c0 = 12, },
+	{ .chan = 132, .c1 = -62, .c0 = 12, },
+	{ .chan = 136, .c1 = -62, .c0 = 11, },
+	{ .chan = 140, .c1 = -62, .c0 = 10, },
+	{ .chan = 149, .c1 = -61, .c0 = 9, },
+	{ .chan = 153, .c1 = -61, .c0 = 9, },
+	{ .chan = 157, .c1 = -61, .c0 = 9, },
+	{ .chan = 161, .c1 = -61, .c0 = 8, },
+	{ .chan = 165, .c1 = -61, .c0 = 8, },
+	{ .chan = 184, .c1 = -62, .c0 = 25, },
+	{ .chan = 188, .c1 = -62, .c0 = 25, },
+	{ .chan = 192, .c1 = -62, .c0 = 25, },
+	{ .chan = 196, .c1 = -62, .c0 = 25, },
+	{ .chan = 200, .c1 = -62, .c0 = 25, },
+	{ .chan = 204, .c1 = -62, .c0 = 25, },
+	{ .chan = 208, .c1 = -62, .c0 = 25, },
+	{ .chan = 212, .c1 = -62, .c0 = 25, },
+	{ .chan = 216, .c1 = -62, .c0 = 26, },
+};
+
+static const struct lpphy_rx_iq_comp lpphy_rev2plus_iq_comp = {
+	.chan = 0,
+	.c1 = -64,
+	.c0 = 0,
+};
+
+static u8 lpphy_nbits(s32 val)
+{
+	u32 tmp = abs(val);
+	u8 nbits = 0;
+
+	while (tmp != 0) {
+		nbits++;
+		tmp >>= 1;
+	}
+
+	return nbits;
+}
+
+static int lpphy_calc_rx_iq_comp(struct b43_wldev *dev, u16 samples)
+{
+	struct lpphy_iq_est iq_est;
+	u16 c0, c1;
+	int prod, ipwr, qpwr, prod_msb, q_msb, tmp1, tmp2, tmp3, tmp4, ret;
+
+	c1 = b43_phy_read(dev, B43_LPPHY_RX_COMP_COEFF_S);
+	c0 = c1 >> 8;
+	c1 |= 0xFF;
+
+	b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S, 0xFF00, 0x00C0);
+	b43_phy_mask(dev, B43_LPPHY_RX_COMP_COEFF_S, 0x00FF);
+
+	ret = lpphy_rx_iq_est(dev, samples, 32, &iq_est);
+	if (!ret)
+		goto out;
+
+	prod = iq_est.iq_prod;
+	ipwr = iq_est.i_pwr;
+	qpwr = iq_est.q_pwr;
+
+	if (ipwr + qpwr < 2) {
+		ret = 0;
+		goto out;
+	}
+
+	prod_msb = lpphy_nbits(prod);
+	q_msb = lpphy_nbits(qpwr);
+	tmp1 = prod_msb - 20;
+
+	if (tmp1 >= 0) {
+		tmp3 = ((prod << (30 - prod_msb)) + (ipwr >> (1 + tmp1))) /
+			(ipwr >> tmp1);
+	} else {
+		tmp3 = ((prod << (30 - prod_msb)) + (ipwr << (-1 - tmp1))) /
+			(ipwr << -tmp1);
+	}
+
+	tmp2 = q_msb - 11;
+
+	if (tmp2 >= 0)
+		tmp4 = (qpwr << (31 - q_msb)) / (ipwr >> tmp2);
+	else
+		tmp4 = (qpwr << (31 - q_msb)) / (ipwr << -tmp2);
+
+	tmp4 -= tmp3 * tmp3;
+	tmp4 = -int_sqrt(tmp4);
+
+	c0 = tmp3 >> 3;
+	c1 = tmp4 >> 4;
+
+out:
+	b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S, 0xFF00, c1);
+	b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S, 0x00FF, c0 << 8);
+	return ret;
+}
+
+/* Complex number using 2 32-bit signed integers */
+typedef struct {s32 i, q;} lpphy_c32;
+
+static lpphy_c32 lpphy_cordic(int theta)
+{
+	u32 arctg[] = { 2949120, 1740967, 919879, 466945, 234379, 117304,
+		      58666, 29335, 14668, 7334, 3667, 1833, 917, 458,
+		      229, 115, 57, 29, };
+	int i, tmp, signx = 1, angle = 0;
+	lpphy_c32 ret = { .i = 39797, .q = 0, };
+
+	theta = clamp_t(int, theta, -180, 180);
+
+	if (theta > 90) {
+		theta -= 180;
+		signx = -1;
+	} else if (theta < -90) {
+		theta += 180;
+		signx = -1;
+	}
+
+	for (i = 0; i <= 17; i++) {
+		if (theta > angle) {
+			tmp = ret.i - (ret.q >> i);
+			ret.q += ret.i >> i;
+			ret.i = tmp;
+			angle += arctg[i];
+		} else {
+			tmp = ret.i + (ret.q >> i);
+			ret.q -= ret.i >> i;
+			ret.i = tmp;
+			angle -= arctg[i];
+		}
+	}
+
+	ret.i *= signx;
+	ret.q *= signx;
+
+	return ret;
+}
+
+static void lpphy_run_samples(struct b43_wldev *dev, u16 samples, u16 loops,
+			      u16 wait)
+{
+	b43_phy_maskset(dev, B43_LPPHY_SMPL_PLAY_BUFFER_CTL,
+			0xFFC0, samples - 1);
+	if (loops != 0xFFFF)
+		loops--;
+	b43_phy_maskset(dev, B43_LPPHY_SMPL_PLAY_COUNT, 0xF000, loops);
+	b43_phy_maskset(dev, B43_LPPHY_SMPL_PLAY_BUFFER_CTL, 0x3F, wait << 6);
+	b43_phy_set(dev, B43_LPPHY_A_PHY_CTL_ADDR, 0x1);
+}
+
+//SPEC FIXME what does a negative freq mean?
+static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
+{
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+	u16 buf[64];
+	int i, samples = 0, angle = 0, rotation = (9 * freq) / 500;
+	lpphy_c32 sample;
+
+	lpphy->tx_tone_freq = freq;
+
+	if (freq) {
+		/* Find i for which abs(freq) integrally divides 20000 * i */
+		for (i = 1; samples * abs(freq) != 20000 * i; i++) {
+			samples = (20000 * i) / abs(freq);
+			if(B43_WARN_ON(samples > 63))
+				return;
+		}
+	} else {
+		samples = 2;
+	}
+
+	for (i = 0; i < samples; i++) {
+		sample = lpphy_cordic(angle);
+		angle += rotation;
+		buf[i] = ((sample.i * max) & 0xFF) << 8;
+		buf[i] |= (sample.q * max) & 0xFF;
+	}
+
+	b43_lptab_write_bulk(dev, B43_LPTAB16(5, 0), samples, buf);
+
+	lpphy_run_samples(dev, samples, 0xFFFF, 0);
+}
+
+static void lpphy_stop_tx_tone(struct b43_wldev *dev)
+{
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+	int i;
+
+	lpphy->tx_tone_freq = 0;
+
+	b43_phy_mask(dev, B43_LPPHY_SMPL_PLAY_COUNT, 0xF000);
+	for (i = 0; i < 31; i++) {
+		if (!(b43_phy_read(dev, B43_LPPHY_A_PHY_CTL_ADDR) & 0x1))
+			break;
+		udelay(100);
+	}
+}
+
+
+static void lpphy_papd_cal(struct b43_wldev *dev, struct lpphy_tx_gains gains,
+			   int mode, bool useindex, u8 index)
+{
+	//TODO
+}
+
+static void lpphy_papd_cal_txpwr(struct b43_wldev *dev)
+{
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+	struct ssb_bus *bus = dev->dev->bus;
+	struct lpphy_tx_gains gains, oldgains;
+	int old_txpctl, old_afe_ovr, old_rf, old_bbmult;
+
+	lpphy_read_tx_pctl_mode_from_hardware(dev);
+	old_txpctl = lpphy->txpctl_mode;
+	old_afe_ovr = b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR) & 0x40;
+	if (old_afe_ovr)
+		oldgains = lpphy_get_tx_gains(dev);
+	old_rf = b43_phy_read(dev, B43_LPPHY_RF_PWR_OVERRIDE) & 0xFF;
+	old_bbmult = lpphy_get_bb_mult(dev);
+
+	lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
+
+	if (bus->chip_id == 0x4325 && bus->chip_rev == 0)
+		lpphy_papd_cal(dev, gains, 0, 1, 30);
+	else
+		lpphy_papd_cal(dev, gains, 0, 1, 65);
+
+	if (old_afe_ovr)
+		lpphy_set_tx_gains(dev, oldgains);
+	lpphy_set_bb_mult(dev, old_bbmult);
+	lpphy_set_tx_power_control(dev, old_txpctl);
+	b43_phy_maskset(dev, B43_LPPHY_RF_PWR_OVERRIDE, 0xFF00, old_rf);
+}
+
+static int lpphy_rx_iq_cal(struct b43_wldev *dev, bool noise, bool tx,
+			    bool rx, bool pa, struct lpphy_tx_gains *gains)
+{
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+	struct ssb_bus *bus = dev->dev->bus;
+	const struct lpphy_rx_iq_comp *iqcomp = NULL;
+	struct lpphy_tx_gains nogains, oldgains;
+	u16 tmp;
+	int i, ret;
+
+	memset(&nogains, 0, sizeof(nogains));
+	memset(&oldgains, 0, sizeof(oldgains));
+
+	if (bus->chip_id == 0x5354) {
+		for (i = 0; i < ARRAY_SIZE(lpphy_5354_iq_table); i++) {
+			if (lpphy_5354_iq_table[i].chan == lpphy->channel) {
+				iqcomp = &lpphy_5354_iq_table[i];
+			}
+		}
+	} else if (dev->phy.rev >= 2) {
+		iqcomp = &lpphy_rev2plus_iq_comp;
+	} else {
+		for (i = 0; i < ARRAY_SIZE(lpphy_rev0_1_iq_table); i++) {
+			if (lpphy_rev0_1_iq_table[i].chan == lpphy->channel) {
+				iqcomp = &lpphy_rev0_1_iq_table[i];
+			}
+		}
+	}
+
+	if (B43_WARN_ON(!iqcomp))
+		return 0;
+
+	b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S, 0xFF00, iqcomp->c1);
+	b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S,
+			0x00FF, iqcomp->c0 << 8);
+
+	if (noise) {
+		tx = true;
+		rx = false;
+		pa = false;
+	}
+
+	lpphy_set_trsw_over(dev, tx, rx);
+
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x8);
+		b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0,
+				0xFFF7, pa << 3);
+	} else {
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x20);
+		b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0,
+				0xFFDF, pa << 5);
+	}
+
+	tmp = b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR) & 0x40;
+
+	if (noise)
+		lpphy_set_rx_gain(dev, 0x2D5D);
+	else {
+		if (tmp)
+			oldgains = lpphy_get_tx_gains(dev);
+		if (!gains)
+			gains = &nogains;
+		lpphy_set_tx_gains(dev, *gains);
+	}
+
+	b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFFE);
+	b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xFFFE);
+	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x800);
+	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x800);
+	lpphy_set_deaf(dev, false);
+	if (noise)
+		ret = lpphy_calc_rx_iq_comp(dev, 0xFFF0);
+	else {
+		lpphy_start_tx_tone(dev, 4000, 100);
+		ret = lpphy_calc_rx_iq_comp(dev, 0x4000);
+		lpphy_stop_tx_tone(dev);
+	}
+	lpphy_clear_deaf(dev, false);
+	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFFC);
+	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFF7);
+	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFDF);
+	if (!noise) {
+		if (tmp)
+			lpphy_set_tx_gains(dev, oldgains);
+		else
+			lpphy_disable_tx_gain_override(dev);
+	}
+	lpphy_disable_rx_gain_override(dev);
+	b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFFE);
+	b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xF7FF);
+	return ret;
+}
+
+static void lpphy_calibration(struct b43_wldev *dev)
+{
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+	enum b43_lpphy_txpctl_mode saved_pctl_mode;
+	bool full_cal = false;
+
+	if (lpphy->full_calib_chan != lpphy->channel) {
+		full_cal = true;
+		lpphy->full_calib_chan = lpphy->channel;
+	}
+
+	b43_mac_suspend(dev);
+
+	lpphy_btcoex_override(dev);
+	if (dev->phy.rev >= 2)
+		lpphy_save_dig_flt_state(dev);
+	lpphy_read_tx_pctl_mode_from_hardware(dev);
+	saved_pctl_mode = lpphy->txpctl_mode;
+	lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
+	//TODO Perform transmit power table I/Q LO calibration
+	if ((dev->phy.rev == 0) && (saved_pctl_mode != B43_LPPHY_TXPCTL_OFF))
+		lpphy_pr41573_workaround(dev);
+	if ((dev->phy.rev >= 2) && full_cal) {
+		lpphy_papd_cal_txpwr(dev);
+	}
+	lpphy_set_tx_power_control(dev, saved_pctl_mode);
+	if (dev->phy.rev >= 2)
+		lpphy_restore_dig_flt_state(dev);
+	lpphy_rx_iq_cal(dev, true, true, false, false, NULL);
+
+	b43_mac_enable(dev);
+}
+
 static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg)
 {
 	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
@@ -1539,12 +2081,6 @@ static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
 	b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
 }
 
-static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev,
-					 bool blocked)
-{
-	//TODO
-}
-
 struct b206x_channel {
 	u8 channel;
 	u16 freq;
@@ -2010,22 +2546,6 @@ static int lpphy_b2062_tune(struct b43_wldev *dev,
 	return err;
 }
 
-
-/* This was previously called lpphy_japan_filter */
-static void lpphy_set_analog_filter(struct b43_wldev *dev, int channel)
-{
-	struct b43_phy_lp *lpphy = dev->phy.lp;
-	u16 tmp = (channel == 14); //SPEC FIXME check japanwidefilter!
-
-	if (dev->phy.rev < 2) { //SPEC FIXME Isn't this rev0/1-specific?
-		b43_phy_maskset(dev, B43_LPPHY_LP_PHY_CTL, 0xFCFF, tmp << 9);
-		if ((dev->phy.rev == 1) && (lpphy->rc_cap))
-			lpphy_set_rc_cap(dev);
-	} else {
-		b43_radio_write(dev, B2063_TX_BB_SP3, 0x3F);
-	}
-}
-
 static void lpphy_b2063_vco_calib(struct b43_wldev *dev)
 {
 	u16 tmp;
@@ -2210,18 +2730,6 @@ static int b43_lpphy_op_init(struct b43_wldev *dev)
 	return 0;
 }
 
-static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
-{
-	if (dev->phy.rev >= 2)
-		return; // rev2+ doesn't support antenna diversity
-
-	if (B43_WARN_ON(antenna > B43_ANTENNA_AUTO1))
-		return;
-
-	b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFD, antenna & 0x2);
-	b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFE, antenna & 0x1);
-}
-
 static void b43_lpphy_op_adjust_txpower(struct b43_wldev *dev)
 {
 	//TODO
@@ -2244,6 +2752,11 @@ void b43_lpphy_op_switch_analog(struct b43_wldev *dev, bool on)
        }
 }
 
+static void b43_lpphy_op_pwork_15sec(struct b43_wldev *dev)
+{
+	//TODO
+}
+
 const struct b43_phy_operations b43_phyops_lp = {
 	.allocate		= b43_lpphy_op_allocate,
 	.free			= b43_lpphy_op_free,
@@ -2261,4 +2774,6 @@ const struct b43_phy_operations b43_phyops_lp = {
 	.set_rx_antenna		= b43_lpphy_op_set_rx_antenna,
 	.recalc_txpower		= b43_lpphy_op_recalc_txpower,
 	.adjust_txpower		= b43_lpphy_op_adjust_txpower,
+	.pwork_15sec		= b43_lpphy_op_pwork_15sec,
+	.pwork_60sec		= lpphy_calibration,
 };
diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h
index c3232c17b60..62737f700cb 100644
--- a/drivers/net/wireless/b43/phy_lp.h
+++ b/drivers/net/wireless/b43/phy_lp.h
@@ -286,6 +286,7 @@
 #define B43_LPPHY_TR_LOOKUP_6			B43_PHY_OFDM(0xC8) /* TR Lookup 6 */
 #define B43_LPPHY_TR_LOOKUP_7			B43_PHY_OFDM(0xC9) /* TR Lookup 7 */
 #define B43_LPPHY_TR_LOOKUP_8			B43_PHY_OFDM(0xCA) /* TR Lookup 8 */
+#define B43_LPPHY_RF_PWR_OVERRIDE		B43_PHY_OFDM(0xD3) /* RF power override */
 
 
 
@@ -871,12 +872,12 @@ struct b43_phy_lp {
 	u8 rssi_gs;
 
 	/* RC cap */
-	u8 rc_cap; /* FIXME initial value? */
+	u8 rc_cap;
 	/* BX arch */
 	u8 bx_arch;
 
 	/* Full calibration channel */
-	u8 full_calib_chan; /* FIXME initial value? */
+	u8 full_calib_chan;
 
 	/* Transmit iqlocal best coeffs */
 	bool tx_iqloc_best_coeffs_valid;
@@ -891,6 +892,12 @@ struct b43_phy_lp {
 
 	/* The channel we are tuned to */
 	u8 channel;
+
+	/* The active antenna diversity mode */
+	int antenna;
+
+	/* Frequency of the active TX tone */
+	int tx_tone_freq;
 };
 
 enum tssi_mux_mode {
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 7a5e294be2b..eda06529ef5 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -621,7 +621,6 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 						  (phystat0 & B43_RX_PHYST0_OFDM),
 						  (phystat0 & B43_RX_PHYST0_GAINCTL),
 						  (phystat3 & B43_RX_PHYST3_TRSTATE));
-		status.qual = (rxhdr->jssi * 100) / B43_RX_MAX_SSI;
 	}
 
 	if (phystat0 & B43_RX_PHYST0_OFDM)
diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig
index 94a46347805..1ffa28835c5 100644
--- a/drivers/net/wireless/b43legacy/Kconfig
+++ b/drivers/net/wireless/b43legacy/Kconfig
@@ -1,6 +1,6 @@
 config B43LEGACY
 	tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)"
-	depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
+	depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
 	select SSB
 	select FW_LOADER
 	---help---
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index 038baa8869e..89fe2f972c7 100644
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -29,8 +29,6 @@
 
 #define B43legacy_IRQWAIT_MAX_RETRIES	20
 
-#define B43legacy_RX_MAX_SSI		60 /* best guess at max ssi */
-
 /* MMIO offsets */
 #define B43legacy_MMIO_DMA0_REASON	0x20
 #define B43legacy_MMIO_DMA0_IRQ_MASK	0x24
diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
index 86640341581..0a86bdf5315 100644
--- a/drivers/net/wireless/b43legacy/dma.c
+++ b/drivers/net/wireless/b43legacy/dma.c
@@ -1240,8 +1240,9 @@ struct b43legacy_dmaring *parse_cookie(struct b43legacy_wldev *dev,
 }
 
 static int dma_tx_fragment(struct b43legacy_dmaring *ring,
-			    struct sk_buff *skb)
+			    struct sk_buff **in_skb)
 {
+	struct sk_buff *skb = *in_skb;
 	const struct b43legacy_dma_ops *ops = ring->ops;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	u8 *header;
@@ -1305,8 +1306,14 @@ static int dma_tx_fragment(struct b43legacy_dmaring *ring,
 		}
 
 		memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len);
+		memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb));
+		bounce_skb->dev = skb->dev;
+		skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb));
+		info = IEEE80211_SKB_CB(bounce_skb);
+
 		dev_kfree_skb_any(skb);
 		skb = bounce_skb;
+		*in_skb = bounce_skb;
 		meta->skb = skb;
 		meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
 		if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
@@ -1360,8 +1367,10 @@ int b43legacy_dma_tx(struct b43legacy_wldev *dev,
 		     struct sk_buff *skb)
 {
 	struct b43legacy_dmaring *ring;
+	struct ieee80211_hdr *hdr;
 	int err = 0;
 	unsigned long flags;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
 	ring = priority_to_txring(dev, skb_get_queue_mapping(skb));
 	spin_lock_irqsave(&ring->lock, flags);
@@ -1386,7 +1395,11 @@ int b43legacy_dma_tx(struct b43legacy_wldev *dev,
 		goto out_unlock;
 	}
 
-	err = dma_tx_fragment(ring, skb);
+	/* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing
+	 * into the skb data or cb now. */
+	hdr = NULL;
+	info = NULL;
+	err = dma_tx_fragment(ring, &skb);
 	if (unlikely(err == -ENOKEY)) {
 		/* Drop this packet, as we don't have the encryption key
 		 * anymore and must not transmit it unencrypted. */
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 0983406f463..d579bb9035c 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2676,7 +2676,7 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
 	if (conf->channel->hw_value != phy->channel)
 		b43legacy_radio_selectchannel(dev, conf->channel->hw_value, 0);
 
-	dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
+	dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR);
 
 	/* Adjust the desired TX power level. */
 	if (conf->power_level != 0) {
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index 103f3c9e7f5..9c8882d9275 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -549,7 +549,6 @@ void b43legacy_rx(struct b43legacy_wldev *dev,
 				      (phystat0 & B43legacy_RX_PHYST0_GAINCTL),
 				      (phystat3 & B43legacy_RX_PHYST3_TRSTATE));
 	status.noise = dev->stats.link_noise;
-	status.qual = (jssi * 100) / B43legacy_RX_MAX_SSI;
 	/* change to support A PHY */
 	if (phystat0 & B43legacy_RX_PHYST0_OFDM)
 		status.rate_idx = b43legacy_plcp_get_bitrate_idx_ofdm(plcp, false);
diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig
index 08f1e989653..287d82728bc 100644
--- a/drivers/net/wireless/hostap/Kconfig
+++ b/drivers/net/wireless/hostap/Kconfig
@@ -1,6 +1,5 @@
 config HOSTAP
 	tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)"
-	depends on WLAN_80211
 	select WIRELESS_EXT
 	select WEXT_SPY
 	select WEXT_PRIV
diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig
index 59ec9eec502..2715b101ade 100644
--- a/drivers/net/wireless/ipw2x00/Kconfig
+++ b/drivers/net/wireless/ipw2x00/Kconfig
@@ -4,7 +4,7 @@
 
 config IPW2100
 	tristate "Intel PRO/Wireless 2100 Network Connection"
-	depends on PCI && WLAN_80211 && CFG80211
+	depends on PCI && CFG80211
 	select WIRELESS_EXT
 	select WEXT_SPY
 	select WEXT_PRIV
@@ -65,7 +65,7 @@ config IPW2100_DEBUG
 
 config IPW2200
 	tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
-	depends on PCI && WLAN_80211 && CFG80211 && CFG80211_WEXT
+	depends on PCI && CFG80211 && CFG80211_WEXT
 	select WIRELESS_EXT
 	select WEXT_SPY
 	select WEXT_PRIV
@@ -154,7 +154,7 @@ config IPW2200_DEBUG
 
 config LIBIPW
 	tristate
-	depends on PCI && WLAN_80211 && CFG80211
+	depends on PCI && CFG80211
 	select WIRELESS_EXT
 	select WEXT_SPY
 	select CRYPTO
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index c82c97be7bf..b16b06c2031 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -1,6 +1,6 @@
 config IWLWIFI
 	tristate "Intel Wireless Wifi"
-	depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+	depends on PCI && MAC80211 && EXPERIMENTAL
 	select FW_LOADER
 
 config IWLWIFI_SPECTRUM_MEASUREMENT
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 3a645e485dd..1e387b9dce1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -164,7 +164,7 @@ struct iwl_cfg iwl1000_bgn_cfg = {
 	.valid_tx_ant = ANT_A,
 	.valid_rx_ant = ANT_AB,
 	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
-	.set_l0s = false,
+	.set_l0s = true,
 	.use_bsm = false,
 	.max_ll_items = OTP_MAX_LL_ITEMS_1000,
 	.shadow_ram_support = false,
@@ -190,7 +190,7 @@ struct iwl_cfg iwl1000_bg_cfg = {
 	.valid_tx_ant = ANT_A,
 	.valid_rx_ant = ANT_AB,
 	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
-	.set_l0s = false,
+	.set_l0s = true,
 	.use_bsm = false,
 	.max_ll_items = OTP_MAX_LL_ITEMS_1000,
 	.shadow_ram_support = false,
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index cbb0585083a..dc81e19674f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -42,38 +42,6 @@
 
 #define RS_NAME "iwl-3945-rs"
 
-struct iwl3945_rate_scale_data {
-	u64 data;
-	s32 success_counter;
-	s32 success_ratio;
-	s32 counter;
-	s32 average_tpt;
-	unsigned long stamp;
-};
-
-struct iwl3945_rs_sta {
-	spinlock_t lock;
-	struct iwl_priv *priv;
-	s32 *expected_tpt;
-	unsigned long last_partial_flush;
-	unsigned long last_flush;
-	u32 flush_time;
-	u32 last_tx_packets;
-	u32 tx_packets;
-	u8 tgg;
-	u8 flush_pending;
-	u8 start_rate;
-	u8 ibss_sta_added;
-	struct timer_list rate_scale_flush;
-	struct iwl3945_rate_scale_data win[IWL_RATE_COUNT_3945];
-#ifdef CONFIG_MAC80211_DEBUGFS
-	struct dentry *rs_sta_dbgfs_stats_table_file;
-#endif
-
-	/* used to be in sta_info */
-	int last_txrate_idx;
-};
-
 static s32 iwl3945_expected_tpt_g[IWL_RATE_COUNT_3945] = {
 	7, 13, 35, 58, 0, 0, 76, 104, 130, 168, 191, 202
 };
@@ -370,6 +338,28 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
 
 	IWL_DEBUG_RATE(priv, "enter\n");
 
+	spin_lock_init(&rs_sta->lock);
+
+	rs_sta->priv = priv;
+
+	rs_sta->start_rate = IWL_RATE_INVALID;
+
+	/* default to just 802.11b */
+	rs_sta->expected_tpt = iwl3945_expected_tpt_b;
+
+	rs_sta->last_partial_flush = jiffies;
+	rs_sta->last_flush = jiffies;
+	rs_sta->flush_time = IWL_RATE_FLUSH;
+	rs_sta->last_tx_packets = 0;
+	rs_sta->ibss_sta_added = 0;
+
+	init_timer(&rs_sta->rate_scale_flush);
+	rs_sta->rate_scale_flush.data = (unsigned long)rs_sta;
+	rs_sta->rate_scale_flush.function = &iwl3945_bg_rate_scale_flush;
+
+	for (i = 0; i < IWL_RATE_COUNT_3945; i++)
+		iwl3945_clear_window(&rs_sta->win[i]);
+
 	/* TODO: what is a good starting rate for STA? About middle? Maybe not
 	 * the lowest or the highest rate.. Could consider using RSSI from
 	 * previous packets? Need to have IEEE 802.1X auth succeed immediately
@@ -409,45 +399,11 @@ static void *rs_alloc_sta(void *iwl_priv, struct ieee80211_sta *sta, gfp_t gfp)
 {
 	struct iwl3945_rs_sta *rs_sta;
 	struct iwl3945_sta_priv *psta = (void *) sta->drv_priv;
-	struct iwl_priv *priv = iwl_priv;
-	int i;
-
-	/*
-	 * XXX: If it's using sta->drv_priv anyway, it might
-	 *	as well just put all the information there.
-	 */
+	struct iwl_priv *priv __maybe_unused = iwl_priv;
 
 	IWL_DEBUG_RATE(priv, "enter\n");
 
-	rs_sta = kzalloc(sizeof(struct iwl3945_rs_sta), gfp);
-	if (!rs_sta) {
-		IWL_DEBUG_RATE(priv, "leave: ENOMEM\n");
-		return NULL;
-	}
-
-	psta->rs_sta = rs_sta;
-
-	spin_lock_init(&rs_sta->lock);
-
-	rs_sta->priv = priv;
-
-	rs_sta->start_rate = IWL_RATE_INVALID;
-
-	/* default to just 802.11b */
-	rs_sta->expected_tpt = iwl3945_expected_tpt_b;
-
-	rs_sta->last_partial_flush = jiffies;
-	rs_sta->last_flush = jiffies;
-	rs_sta->flush_time = IWL_RATE_FLUSH;
-	rs_sta->last_tx_packets = 0;
-	rs_sta->ibss_sta_added = 0;
-
-	init_timer(&rs_sta->rate_scale_flush);
-	rs_sta->rate_scale_flush.data = (unsigned long)rs_sta;
-	rs_sta->rate_scale_flush.function = &iwl3945_bg_rate_scale_flush;
-
-	for (i = 0; i < IWL_RATE_COUNT_3945; i++)
-		iwl3945_clear_window(&rs_sta->win[i]);
+	rs_sta = &psta->rs_sta;
 
 	IWL_DEBUG_RATE(priv, "leave\n");
 
@@ -458,14 +414,11 @@ static void rs_free_sta(void *iwl_priv, struct ieee80211_sta *sta,
 			void *priv_sta)
 {
 	struct iwl3945_sta_priv *psta = (void *) sta->drv_priv;
-	struct iwl3945_rs_sta *rs_sta = priv_sta;
+	struct iwl3945_rs_sta *rs_sta = &psta->rs_sta;
 	struct iwl_priv *priv __maybe_unused = rs_sta->priv;
 
-	psta->rs_sta = NULL;
-
 	IWL_DEBUG_RATE(priv, "enter\n");
 	del_timer_sync(&rs_sta->rate_scale_flush);
-	kfree(rs_sta);
 	IWL_DEBUG_RATE(priv, "leave\n");
 }
 
@@ -960,14 +913,15 @@ void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
 
 	rcu_read_lock();
 
-	sta = ieee80211_find_sta(hw, priv->stations[sta_id].sta.sta.addr);
+	sta = ieee80211_find_sta(priv->vif,
+				 priv->stations[sta_id].sta.sta.addr);
 	if (!sta) {
 		rcu_read_unlock();
 		return;
 	}
 
 	psta = (void *) sta->drv_priv;
-	rs_sta = psta->rs_sta;
+	rs_sta = &psta->rs_sta;
 
 	spin_lock_irqsave(&rs_sta->lock, flags);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index ebb999a51b5..2b0d65c5780 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -74,8 +74,41 @@ extern struct pci_device_id iwl3945_hw_card_ids[];
 /* Module parameters accessible from iwl-*.c */
 extern struct iwl_mod_params iwl3945_mod_params;
 
+struct iwl3945_rate_scale_data {
+	u64 data;
+	s32 success_counter;
+	s32 success_ratio;
+	s32 counter;
+	s32 average_tpt;
+	unsigned long stamp;
+};
+
+struct iwl3945_rs_sta {
+	spinlock_t lock;
+	struct iwl_priv *priv;
+	s32 *expected_tpt;
+	unsigned long last_partial_flush;
+	unsigned long last_flush;
+	u32 flush_time;
+	u32 last_tx_packets;
+	u32 tx_packets;
+	u8 tgg;
+	u8 flush_pending;
+	u8 start_rate;
+	u8 ibss_sta_added;
+	struct timer_list rate_scale_flush;
+	struct iwl3945_rate_scale_data win[IWL_RATE_COUNT_3945];
+#ifdef CONFIG_MAC80211_DEBUGFS
+	struct dentry *rs_sta_dbgfs_stats_table_file;
+#endif
+
+	/* used to be in sta_info */
+	int last_txrate_idx;
+};
+
+
 struct iwl3945_sta_priv {
-	struct iwl3945_rs_sta *rs_sta;
+	struct iwl3945_rs_sta rs_sta;
 };
 
 enum iwl3945_antenna {
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index d256fecc6cd..910217f0ad8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -591,16 +591,6 @@ static void iwl5000_tx_queue_set_status(struct iwl_priv *priv,
 		       scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
 }
 
-static int iwl5000_send_wimax_coex(struct iwl_priv *priv)
-{
-	struct iwl_wimax_coex_cmd coex_cmd;
-
-	memset(&coex_cmd, 0, sizeof(coex_cmd));
-
-	return iwl_send_cmd_pdu(priv, COEX_PRIORITY_TABLE_CMD,
-				sizeof(coex_cmd), &coex_cmd);
-}
-
 int iwl5000_alive_notify(struct iwl_priv *priv)
 {
 	u32 a;
@@ -681,7 +671,7 @@ int iwl5000_alive_notify(struct iwl_priv *priv)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 
-	iwl5000_send_wimax_coex(priv);
+	iwl_send_wimax_coex(priv);
 
 	iwl5000_set_Xtal_calib(priv);
 	iwl_send_calib_results(priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 32466d38d1a..70e117f8d0c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -299,7 +299,7 @@ struct iwl_cfg iwl6000h_2agn_cfg = {
 	.valid_tx_ant = ANT_AB,
 	.valid_rx_ant = ANT_AB,
 	.pll_cfg_val = 0,
-	.set_l0s = false,
+	.set_l0s = true,
 	.use_bsm = false,
 	.pa_type = IWL_PA_HYBRID,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
@@ -329,7 +329,7 @@ struct iwl_cfg iwl6000h_2abg_cfg = {
 	.valid_tx_ant = ANT_AB,
 	.valid_rx_ant = ANT_AB,
 	.pll_cfg_val = 0,
-	.set_l0s = false,
+	.set_l0s = true,
 	.use_bsm = false,
 	.pa_type = IWL_PA_HYBRID,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
@@ -358,7 +358,7 @@ struct iwl_cfg iwl6000h_2bg_cfg = {
 	.valid_tx_ant = ANT_AB,
 	.valid_rx_ant = ANT_AB,
 	.pll_cfg_val = 0,
-	.set_l0s = false,
+	.set_l0s = true,
 	.use_bsm = false,
 	.pa_type = IWL_PA_HYBRID,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
@@ -390,7 +390,7 @@ struct iwl_cfg iwl6000i_2agn_cfg = {
 	.valid_tx_ant = ANT_BC,
 	.valid_rx_ant = ANT_BC,
 	.pll_cfg_val = 0,
-	.set_l0s = false,
+	.set_l0s = true,
 	.use_bsm = false,
 	.pa_type = IWL_PA_INTERNAL,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
@@ -420,7 +420,7 @@ struct iwl_cfg iwl6000i_2abg_cfg = {
 	.valid_tx_ant = ANT_BC,
 	.valid_rx_ant = ANT_BC,
 	.pll_cfg_val = 0,
-	.set_l0s = false,
+	.set_l0s = true,
 	.use_bsm = false,
 	.pa_type = IWL_PA_INTERNAL,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
@@ -449,7 +449,7 @@ struct iwl_cfg iwl6000i_2bg_cfg = {
 	.valid_tx_ant = ANT_BC,
 	.valid_rx_ant = ANT_BC,
 	.pll_cfg_val = 0,
-	.set_l0s = false,
+	.set_l0s = true,
 	.use_bsm = false,
 	.pa_type = IWL_PA_INTERNAL,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
@@ -478,7 +478,7 @@ struct iwl_cfg iwl6050_2agn_cfg = {
 	.valid_tx_ant = ANT_AB,
 	.valid_rx_ant = ANT_AB,
 	.pll_cfg_val = 0,
-	.set_l0s = false,
+	.set_l0s = true,
 	.use_bsm = false,
 	.pa_type = IWL_PA_SYSTEM,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
@@ -490,6 +490,8 @@ struct iwl_cfg iwl6050_2agn_cfg = {
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
+	.support_sm_ps = true,
+	.support_wimax_coexist = true,
 };
 
 struct iwl_cfg iwl6050_2abg_cfg = {
@@ -508,7 +510,7 @@ struct iwl_cfg iwl6050_2abg_cfg = {
 	.valid_tx_ant = ANT_AB,
 	.valid_rx_ant = ANT_AB,
 	.pll_cfg_val = 0,
-	.set_l0s = false,
+	.set_l0s = true,
 	.use_bsm = false,
 	.pa_type = IWL_PA_SYSTEM,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
@@ -519,6 +521,7 @@ struct iwl_cfg iwl6050_2abg_cfg = {
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
+	.support_wimax_coexist = true,
 };
 
 struct iwl_cfg iwl6000_3agn_cfg = {
@@ -537,7 +540,7 @@ struct iwl_cfg iwl6000_3agn_cfg = {
 	.valid_tx_ant = ANT_ABC,
 	.valid_rx_ant = ANT_ABC,
 	.pll_cfg_val = 0,
-	.set_l0s = false,
+	.set_l0s = true,
 	.use_bsm = false,
 	.pa_type = IWL_PA_SYSTEM,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
@@ -567,7 +570,7 @@ struct iwl_cfg iwl6050_3agn_cfg = {
 	.valid_tx_ant = ANT_ABC,
 	.valid_rx_ant = ANT_ABC,
 	.pll_cfg_val = 0,
-	.set_l0s = false,
+	.set_l0s = true,
 	.use_bsm = false,
 	.pa_type = IWL_PA_SYSTEM,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
@@ -579,6 +582,8 @@ struct iwl_cfg iwl6050_3agn_cfg = {
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
+	.support_sm_ps = true,
+	.support_wimax_coexist = true,
 };
 
 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 27d4ece4d46..43edd8fd440 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -2477,19 +2477,12 @@ static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta,
 	struct iwl_lq_sta *lq_sta;
 	struct iwl_station_priv *sta_priv = (struct iwl_station_priv *) sta->drv_priv;
 	struct iwl_priv *priv;
-	int i, j;
 
 	priv = (struct iwl_priv *)priv_rate;
 	IWL_DEBUG_RATE(priv, "create station rate scale window\n");
 
 	lq_sta = &sta_priv->lq_sta;
 
-	lq_sta->lq.sta_id = 0xff;
-
-	for (j = 0; j < LQ_SIZE; j++)
-		for (i = 0; i < IWL_RATE_COUNT; i++)
-			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
-
 	return lq_sta;
 }
 
@@ -2502,6 +2495,12 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
 	struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
 	struct iwl_lq_sta *lq_sta = priv_sta;
 
+	lq_sta->lq.sta_id = 0xff;
+
+	for (j = 0; j < LQ_SIZE; j++)
+		for (i = 0; i < IWL_RATE_COUNT; i++)
+			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
+
 	lq_sta->flush_timer = 0;
 	lq_sta->supp_rates = sta->supp_rates[sband->band];
 	for (j = 0; j < LQ_SIZE; j++)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index fa1672e99e4..b5fe8f87aa7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -190,11 +190,7 @@ int iwl_commit_rxon(struct iwl_priv *priv)
 	priv->start_calib = 0;
 
 	/* Add the broadcast address so we can send broadcast frames */
-	if (iwl_rxon_add_station(priv, iwl_bcast_addr, 0) ==
-						IWL_INVALID_STATION) {
-		IWL_ERR(priv, "Error adding BROADCAST address for transmit.\n");
-		return -EIO;
-	}
+	iwl_add_bcast_station(priv);
 
 	/* If we have set the ASSOC_MSK and we are in BSS mode then
 	 * add the IWL_AP_ID to the station rate table */
@@ -890,6 +886,7 @@ static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
 	u32 inta, handled = 0;
 	u32 inta_fh;
 	unsigned long flags;
+	u32 i;
 #ifdef CONFIG_IWLWIFI_DEBUG
 	u32 inta_mask;
 #endif
@@ -1007,19 +1004,17 @@ static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
 		handled |= CSR_INT_BIT_SW_ERR;
 	}
 
-	/* uCode wakes up after power-down sleep */
+	/*
+	 * uCode wakes up after power-down sleep.
+	 * Tell device about any new tx or host commands enqueued,
+	 * and about any Rx buffers made available while asleep.
+	 */
 	if (inta & CSR_INT_BIT_WAKEUP) {
 		IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
 		iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
-		iwl_txq_update_write_ptr(priv, &priv->txq[0]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[1]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[2]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[3]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[4]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[5]);
-
+		for (i = 0; i < priv->hw_params.max_txq_num; i++)
+			iwl_txq_update_write_ptr(priv, &priv->txq[i]);
 		priv->isr_stats.wakeup++;
-
 		handled |= CSR_INT_BIT_WAKEUP;
 	}
 
@@ -1033,11 +1028,12 @@ static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
 		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
 	}
 
+	/* This "Tx" DMA channel is used only for loading uCode */
 	if (inta & CSR_INT_BIT_FH_TX) {
-		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
+		IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
 		priv->isr_stats.tx++;
 		handled |= CSR_INT_BIT_FH_TX;
-		/* FH finished to write, send event */
+		/* Wake up uCode load routine, now that load is complete */
 		priv->ucode_write_complete = 1;
 		wake_up_interruptible(&priv->wait_command_queue);
 	}
@@ -1234,12 +1230,13 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 		iwl_leds_background(priv);
 	}
 
+	/* This "Tx" DMA channel is used only for loading uCode */
 	if (inta & CSR_INT_BIT_FH_TX) {
 		iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
-		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
+		IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
 		priv->isr_stats.tx++;
 		handled |= CSR_INT_BIT_FH_TX;
-		/* FH finished to write, send event */
+		/* Wake up uCode load routine, now that load is complete */
 		priv->ucode_write_complete = 1;
 		wake_up_interruptible(&priv->wait_command_queue);
 	}
@@ -1377,6 +1374,14 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 	       IWL_UCODE_API(priv->ucode_ver),
 	       IWL_UCODE_SERIAL(priv->ucode_ver));
 
+	snprintf(priv->hw->wiphy->fw_version,
+		 sizeof(priv->hw->wiphy->fw_version),
+		 "%u.%u.%u.%u",
+		 IWL_UCODE_MAJOR(priv->ucode_ver),
+		 IWL_UCODE_MINOR(priv->ucode_ver),
+		 IWL_UCODE_API(priv->ucode_ver),
+		 IWL_UCODE_SERIAL(priv->ucode_ver));
+
 	if (build)
 		IWL_DEBUG_INFO(priv, "Build %u\n", build);
 
@@ -2515,7 +2520,7 @@ void iwl_config_ap(struct iwl_priv *priv)
 		spin_lock_irqsave(&priv->lock, flags);
 		iwl_activate_qos(priv, 1);
 		spin_unlock_irqrestore(&priv->lock, flags);
-		iwl_rxon_add_station(priv, iwl_bcast_addr, 0);
+		iwl_add_bcast_station(priv);
 	}
 	iwl_send_beacon_cmd(priv);
 
@@ -2963,6 +2968,100 @@ static void iwl_cancel_deferred_work(struct iwl_priv *priv)
 	del_timer_sync(&priv->statistics_periodic);
 }
 
+static void iwl_init_hw_rates(struct iwl_priv *priv,
+			      struct ieee80211_rate *rates)
+{
+	int i;
+
+	for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
+		rates[i].bitrate = iwl_rates[i].ieee * 5;
+		rates[i].hw_value = i; /* Rate scaling will work on indexes */
+		rates[i].hw_value_short = i;
+		rates[i].flags = 0;
+		if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
+			/*
+			 * If CCK != 1M then set short preamble rate flag.
+			 */
+			rates[i].flags |=
+				(iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
+					0 : IEEE80211_RATE_SHORT_PREAMBLE;
+		}
+	}
+}
+
+static int iwl_init_drv(struct iwl_priv *priv)
+{
+	int ret;
+
+	priv->ibss_beacon = NULL;
+
+	spin_lock_init(&priv->lock);
+	spin_lock_init(&priv->sta_lock);
+	spin_lock_init(&priv->hcmd_lock);
+
+	INIT_LIST_HEAD(&priv->free_frames);
+
+	mutex_init(&priv->mutex);
+
+	/* Clear the driver's (not device's) station table */
+	iwl_clear_stations_table(priv);
+
+	priv->ieee_channels = NULL;
+	priv->ieee_rates = NULL;
+	priv->band = IEEE80211_BAND_2GHZ;
+
+	priv->iw_mode = NL80211_IFTYPE_STATION;
+	if (priv->cfg->support_sm_ps)
+		priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DYNAMIC;
+	else
+		priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED;
+
+	/* Choose which receivers/antennas to use */
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
+	iwl_init_scan_params(priv);
+
+	iwl_reset_qos(priv);
+
+	priv->qos_data.qos_active = 0;
+	priv->qos_data.qos_cap.val = 0;
+
+	priv->rates_mask = IWL_RATES_MASK;
+	/* Set the tx_power_user_lmt to the lowest power level
+	 * this value will get overwritten by channel max power avg
+	 * from eeprom */
+	priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MIN;
+
+	ret = iwl_init_channel_map(priv);
+	if (ret) {
+		IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
+		goto err;
+	}
+
+	ret = iwlcore_init_geos(priv);
+	if (ret) {
+		IWL_ERR(priv, "initializing geos failed: %d\n", ret);
+		goto err_free_channel_map;
+	}
+	iwl_init_hw_rates(priv, priv->ieee_rates);
+
+	return 0;
+
+err_free_channel_map:
+	iwl_free_channel_map(priv);
+err:
+	return ret;
+}
+
+static void iwl_uninit_drv(struct iwl_priv *priv)
+{
+	iwl_calib_free_results(priv);
+	iwlcore_free_geos(priv);
+	iwl_free_channel_map(priv);
+	kfree(priv->scan);
+}
+
 static struct attribute *iwl_sysfs_entries[] = {
 	&dev_attr_flags.attr,
 	&dev_attr_filter_flags.attr,
@@ -3105,12 +3204,6 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out_iounmap;
 	}
 
-	/* amp init */
-	err = priv->cfg->ops->lib->apm_ops.init(priv);
-	if (err < 0) {
-		IWL_ERR(priv, "Failed to init APMG\n");
-		goto out_iounmap;
-	}
 	/*****************
 	 * 4. Read EEPROM
 	 *****************/
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
index 1f801eb9fbf..d994de7438d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.c
@@ -132,6 +132,7 @@ void iwl_calib_free_results(struct iwl_priv *priv)
 		priv->calib_results[i].buf_len = 0;
 	}
 }
+EXPORT_SYMBOL(iwl_calib_free_results);
 
 /*****************************************************************************
  * RUNTIME calibrations framework
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 954bad60355..b62c90ec9e1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -3503,30 +3503,134 @@ struct iwl_led_cmd {
 } __attribute__ ((packed));
 
 /*
- * Coexistence WIFI/WIMAX  Command
- * COEX_PRIORITY_TABLE_CMD = 0x5a
- *
+ * station priority table entries
+ * also used as potential "events" value for both
+ * COEX_MEDIUM_NOTIFICATION and COEX_EVENT_CMD
  */
+
+/*
+ * COEX events entry flag masks
+ * RP - Requested Priority
+ * WP - Win Medium Priority: priority assigned when the contention has been won
+ */
+#define COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG        (0x1)
+#define COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG        (0x2)
+#define COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG  (0x4)
+
+#define COEX_CU_UNASSOC_IDLE_RP               4
+#define COEX_CU_UNASSOC_MANUAL_SCAN_RP        4
+#define COEX_CU_UNASSOC_AUTO_SCAN_RP          4
+#define COEX_CU_CALIBRATION_RP                4
+#define COEX_CU_PERIODIC_CALIBRATION_RP       4
+#define COEX_CU_CONNECTION_ESTAB_RP           4
+#define COEX_CU_ASSOCIATED_IDLE_RP            4
+#define COEX_CU_ASSOC_MANUAL_SCAN_RP          4
+#define COEX_CU_ASSOC_AUTO_SCAN_RP            4
+#define COEX_CU_ASSOC_ACTIVE_LEVEL_RP         4
+#define COEX_CU_RF_ON_RP                      6
+#define COEX_CU_RF_OFF_RP                     4
+#define COEX_CU_STAND_ALONE_DEBUG_RP          6
+#define COEX_CU_IPAN_ASSOC_LEVEL_RP           4
+#define COEX_CU_RSRVD1_RP                     4
+#define COEX_CU_RSRVD2_RP                     4
+
+#define COEX_CU_UNASSOC_IDLE_WP               3
+#define COEX_CU_UNASSOC_MANUAL_SCAN_WP        3
+#define COEX_CU_UNASSOC_AUTO_SCAN_WP          3
+#define COEX_CU_CALIBRATION_WP                3
+#define COEX_CU_PERIODIC_CALIBRATION_WP       3
+#define COEX_CU_CONNECTION_ESTAB_WP           3
+#define COEX_CU_ASSOCIATED_IDLE_WP            3
+#define COEX_CU_ASSOC_MANUAL_SCAN_WP          3
+#define COEX_CU_ASSOC_AUTO_SCAN_WP            3
+#define COEX_CU_ASSOC_ACTIVE_LEVEL_WP         3
+#define COEX_CU_RF_ON_WP                      3
+#define COEX_CU_RF_OFF_WP                     3
+#define COEX_CU_STAND_ALONE_DEBUG_WP          6
+#define COEX_CU_IPAN_ASSOC_LEVEL_WP           3
+#define COEX_CU_RSRVD1_WP                     3
+#define COEX_CU_RSRVD2_WP                     3
+
+#define COEX_UNASSOC_IDLE_FLAGS                     0
+#define COEX_UNASSOC_MANUAL_SCAN_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_UNASSOC_AUTO_SCAN_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_CALIBRATION_FLAGS			\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_PERIODIC_CALIBRATION_FLAGS             0
+/*
+ * COEX_CONNECTION_ESTAB:
+ * we need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network.
+ */
+#define COEX_CONNECTION_ESTAB_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG |	\
+	COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+#define COEX_ASSOCIATED_IDLE_FLAGS                  0
+#define COEX_ASSOC_MANUAL_SCAN_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_ASSOC_AUTO_SCAN_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_ASSOC_ACTIVE_LEVEL_FLAGS               0
+#define COEX_RF_ON_FLAGS                            0
+#define COEX_RF_OFF_FLAGS                           0
+#define COEX_STAND_ALONE_DEBUG_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_IPAN_ASSOC_LEVEL_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG |	\
+	 COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+#define COEX_RSRVD1_FLAGS                           0
+#define COEX_RSRVD2_FLAGS                           0
+/*
+ * COEX_CU_RF_ON is the event wrapping all radio ownership.
+ * We need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network.
+ */
+#define COEX_CU_RF_ON_FLAGS			\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG |	\
+	 COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+
+
 enum {
+	/* un-association part */
 	COEX_UNASSOC_IDLE		= 0,
 	COEX_UNASSOC_MANUAL_SCAN	= 1,
 	COEX_UNASSOC_AUTO_SCAN		= 2,
+	/* calibration */
 	COEX_CALIBRATION		= 3,
 	COEX_PERIODIC_CALIBRATION	= 4,
+	/* connection */
 	COEX_CONNECTION_ESTAB		= 5,
+	/* association part */
 	COEX_ASSOCIATED_IDLE		= 6,
 	COEX_ASSOC_MANUAL_SCAN		= 7,
 	COEX_ASSOC_AUTO_SCAN		= 8,
 	COEX_ASSOC_ACTIVE_LEVEL		= 9,
+	/* RF ON/OFF */
 	COEX_RF_ON			= 10,
 	COEX_RF_OFF			= 11,
 	COEX_STAND_ALONE_DEBUG		= 12,
+	/* IPAN */
 	COEX_IPAN_ASSOC_LEVEL		= 13,
+	/* reserved */
 	COEX_RSRVD1			= 14,
 	COEX_RSRVD2			= 15,
 	COEX_NUM_OF_EVENTS		= 16
 };
 
+/*
+ * Coexistence WIFI/WIMAX  Command
+ * COEX_PRIORITY_TABLE_CMD = 0x5a
+ *
+ */
 struct iwl_wimax_coex_event_entry {
 	u8 request_prio;
 	u8 win_medium_prio;
@@ -3551,6 +3655,55 @@ struct iwl_wimax_coex_cmd {
 	struct iwl_wimax_coex_event_entry sta_prio[COEX_NUM_OF_EVENTS];
 } __attribute__ ((packed));
 
+/*
+ * Coexistence MEDIUM NOTIFICATION
+ * COEX_MEDIUM_NOTIFICATION = 0x5b
+ *
+ * notification from uCode to host to indicate medium changes
+ *
+ */
+/*
+ * status field
+ * bit 0 - 2: medium status
+ * bit 3: medium change indication
+ * bit 4 - 31: reserved
+ */
+/* status option values, (0 - 2 bits) */
+#define COEX_MEDIUM_BUSY	(0x0) /* radio belongs to WiMAX */
+#define COEX_MEDIUM_ACTIVE	(0x1) /* radio belongs to WiFi */
+#define COEX_MEDIUM_PRE_RELEASE	(0x2) /* received radio release */
+#define COEX_MEDIUM_MSK		(0x7)
+
+/* send notification status (1 bit) */
+#define COEX_MEDIUM_CHANGED	(0x8)
+#define COEX_MEDIUM_CHANGED_MSK	(0x8)
+#define COEX_MEDIUM_SHIFT	(3)
+
+struct iwl_coex_medium_notification {
+	__le32 status;
+	__le32 events;
+} __attribute__ ((packed));
+
+/*
+ * Coexistence EVENT  Command
+ * COEX_EVENT_CMD = 0x5c
+ *
+ * send from host to uCode for coex event request.
+ */
+/* flags options */
+#define COEX_EVENT_REQUEST_MSK	(0x1)
+
+struct iwl_coex_event_cmd {
+	u8 flags;
+	u8 event;
+	__le16 reserved;
+} __attribute__ ((packed));
+
+struct iwl_coex_event_resp {
+	__le32 status;
+} __attribute__ ((packed));
+
+
 /******************************************************************************
  * (13)
  * Union of all expected notifications/responses:
@@ -3587,6 +3740,8 @@ struct iwl_rx_packet {
 		struct iwl_notif_statistics stats;
 		struct iwl_compressed_ba_resp compressed_ba;
 		struct iwl_missed_beacon_notif missed_beacon;
+		struct iwl_coex_medium_notification coex_medium_notif;
+		struct iwl_coex_event_resp coex_event;
 		__le32 status;
 		u8 raw[0];
 	} u;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index d2b56baf98f..e0b5b4aef41 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -46,6 +46,37 @@ MODULE_VERSION(IWLWIFI_VERSION);
 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
 MODULE_LICENSE("GPL");
 
+static struct iwl_wimax_coex_event_entry cu_priorities[COEX_NUM_OF_EVENTS] = {
+	{COEX_CU_UNASSOC_IDLE_RP, COEX_CU_UNASSOC_IDLE_WP,
+	 0, COEX_UNASSOC_IDLE_FLAGS},
+	{COEX_CU_UNASSOC_MANUAL_SCAN_RP, COEX_CU_UNASSOC_MANUAL_SCAN_WP,
+	 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS},
+	{COEX_CU_UNASSOC_AUTO_SCAN_RP, COEX_CU_UNASSOC_AUTO_SCAN_WP,
+	 0, COEX_UNASSOC_AUTO_SCAN_FLAGS},
+	{COEX_CU_CALIBRATION_RP, COEX_CU_CALIBRATION_WP,
+	 0, COEX_CALIBRATION_FLAGS},
+	{COEX_CU_PERIODIC_CALIBRATION_RP, COEX_CU_PERIODIC_CALIBRATION_WP,
+	 0, COEX_PERIODIC_CALIBRATION_FLAGS},
+	{COEX_CU_CONNECTION_ESTAB_RP, COEX_CU_CONNECTION_ESTAB_WP,
+	 0, COEX_CONNECTION_ESTAB_FLAGS},
+	{COEX_CU_ASSOCIATED_IDLE_RP, COEX_CU_ASSOCIATED_IDLE_WP,
+	 0, COEX_ASSOCIATED_IDLE_FLAGS},
+	{COEX_CU_ASSOC_MANUAL_SCAN_RP, COEX_CU_ASSOC_MANUAL_SCAN_WP,
+	 0, COEX_ASSOC_MANUAL_SCAN_FLAGS},
+	{COEX_CU_ASSOC_AUTO_SCAN_RP, COEX_CU_ASSOC_AUTO_SCAN_WP,
+	 0, COEX_ASSOC_AUTO_SCAN_FLAGS},
+	{COEX_CU_ASSOC_ACTIVE_LEVEL_RP, COEX_CU_ASSOC_ACTIVE_LEVEL_WP,
+	 0, COEX_ASSOC_ACTIVE_LEVEL_FLAGS},
+	{COEX_CU_RF_ON_RP, COEX_CU_RF_ON_WP, 0, COEX_CU_RF_ON_FLAGS},
+	{COEX_CU_RF_OFF_RP, COEX_CU_RF_OFF_WP, 0, COEX_RF_OFF_FLAGS},
+	{COEX_CU_STAND_ALONE_DEBUG_RP, COEX_CU_STAND_ALONE_DEBUG_WP,
+	 0, COEX_STAND_ALONE_DEBUG_FLAGS},
+	{COEX_CU_IPAN_ASSOC_LEVEL_RP, COEX_CU_IPAN_ASSOC_LEVEL_WP,
+	 0, COEX_IPAN_ASSOC_LEVEL_FLAGS},
+	{COEX_CU_RSRVD1_RP, COEX_CU_RSRVD1_WP, 0, COEX_RSRVD1_FLAGS},
+	{COEX_CU_RSRVD2_RP, COEX_CU_RSRVD2_WP, 0, COEX_RSRVD2_FLAGS}
+};
+
 #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np)    \
 	[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,      \
 				    IWL_RATE_SISO_##s##M_PLCP, \
@@ -414,8 +445,12 @@ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
 	if (priv->cfg->ht_greenfield_support)
 		ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
 	ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
-	ht_info->cap |= (IEEE80211_HT_CAP_SM_PS &
-			     (WLAN_HT_CAP_SM_PS_DISABLED << 2));
+	if (priv->cfg->support_sm_ps)
+		ht_info->cap |= (IEEE80211_HT_CAP_SM_PS &
+				     (WLAN_HT_CAP_SM_PS_DYNAMIC << 2));
+	else
+		ht_info->cap |= (IEEE80211_HT_CAP_SM_PS &
+				     (WLAN_HT_CAP_SM_PS_DISABLED << 2));
 
 	max_bit_rate = MAX_BIT_RATE_20_MHZ;
 	if (priv->hw_params.ht40_channel & BIT(band)) {
@@ -451,28 +486,6 @@ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
 	}
 }
 
-static void iwlcore_init_hw_rates(struct iwl_priv *priv,
-			      struct ieee80211_rate *rates)
-{
-	int i;
-
-	for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
-		rates[i].bitrate = iwl_rates[i].ieee * 5;
-		rates[i].hw_value = i; /* Rate scaling will work on indexes */
-		rates[i].hw_value_short = i;
-		rates[i].flags = 0;
-		if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
-			/*
-			 * If CCK != 1M then set short preamble rate flag.
-			 */
-			rates[i].flags |=
-				(iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
-					0 : IEEE80211_RATE_SHORT_PREAMBLE;
-		}
-	}
-}
-
-
 /**
  * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
  */
@@ -985,17 +998,35 @@ static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
 }
 
 /*
- * When we are in power saving, there's no difference between
- * using multiple chains or just a single chain, but due to the
- * lack of SM PS we lose a lot of throughput if we use just a
- * single chain.
- *
- * Therefore, use the active count here (which will use multiple
- * chains unless connected to a legacy AP).
+ * When we are in power saving mode, unless device support spatial
+ * multiplexing power save, use the active count for rx chain count.
  */
 static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
 {
-	return active_cnt;
+	int idle_cnt = active_cnt;
+	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
+
+	if (priv->cfg->support_sm_ps) {
+		/* # Rx chains when idling and maybe trying to save power */
+		switch (priv->current_ht_config.sm_ps) {
+		case WLAN_HT_CAP_SM_PS_STATIC:
+		case WLAN_HT_CAP_SM_PS_DYNAMIC:
+			idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL :
+				IWL_NUM_IDLE_CHAINS_SINGLE;
+			break;
+		case WLAN_HT_CAP_SM_PS_DISABLED:
+			idle_cnt = (is_cam) ? active_cnt :
+				IWL_NUM_IDLE_CHAINS_SINGLE;
+			break;
+		case WLAN_HT_CAP_SM_PS_INVALID:
+		default:
+			IWL_ERR(priv, "invalid sm_ps mode %d\n",
+				priv->current_ht_config.sm_ps);
+			WARN_ON(1);
+			break;
+		}
+	}
+	return idle_cnt;
 }
 
 /* up to 4 chains */
@@ -1353,39 +1384,39 @@ EXPORT_SYMBOL(iwl_irq_handle_error);
 
 int iwl_apm_stop_master(struct iwl_priv *priv)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
+	int ret = 0;
 
-	/* set stop master bit */
+	/* stop device's busmaster DMA activity */
 	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
 
-	iwl_poll_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED,
+	ret = iwl_poll_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED,
 			CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
+	if (ret)
+		IWL_WARN(priv, "Master Disable Timed Out, 100 usec\n");
 
-	spin_unlock_irqrestore(&priv->lock, flags);
 	IWL_DEBUG_INFO(priv, "stop master\n");
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL(iwl_apm_stop_master);
 
 void iwl_apm_stop(struct iwl_priv *priv)
 {
-	unsigned long flags;
-
 	IWL_DEBUG_INFO(priv, "Stop card, put in low power state\n");
 
+	/* Stop device's DMA activity */
 	iwl_apm_stop_master(priv);
 
-	spin_lock_irqsave(&priv->lock, flags);
-
+	/* Reset the entire device */
 	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 
 	udelay(10);
-	/* clear "init complete"  move adapter D0A* --> D0U state */
+
+	/*
+	 * Clear "initialization complete" bit to move adapter from
+	 * D0A* (powered-up Active) --> D0U* (Uninitialized) state.
+	 */
 	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-	spin_unlock_irqrestore(&priv->lock, flags);
 }
 EXPORT_SYMBOL(iwl_apm_stop);
 
@@ -1430,8 +1461,12 @@ int iwl_apm_init(struct iwl_priv *priv)
 				    CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
 
 	/*
-	 * HW bug W/A - costs negligible power consumption ...
-	 * Check if BIOS (or OS) enabled L1-ASPM on this device
+	 * HW bug W/A for instability in PCIe bus L0->L0S->L1 transition.
+	 * Check if BIOS (or OS) enabled L1-ASPM on this device.
+	 * If so (likely), disable L0S, so device moves directly L0->L1;
+	 *    costs negligible amount of power savings.
+	 * If not (unlikely), enable L0S, so there is at least some
+	 *    power savings, even without L1.
 	 */
 	if (priv->cfg->set_l0s) {
 		lctl = iwl_pcie_link_ctl(priv);
@@ -1567,68 +1602,6 @@ int iwl_set_hw_params(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwl_set_hw_params);
 
-int iwl_init_drv(struct iwl_priv *priv)
-{
-	int ret;
-
-	priv->ibss_beacon = NULL;
-
-	spin_lock_init(&priv->lock);
-	spin_lock_init(&priv->sta_lock);
-	spin_lock_init(&priv->hcmd_lock);
-
-	INIT_LIST_HEAD(&priv->free_frames);
-
-	mutex_init(&priv->mutex);
-
-	/* Clear the driver's (not device's) station table */
-	iwl_clear_stations_table(priv);
-
-	priv->ieee_channels = NULL;
-	priv->ieee_rates = NULL;
-	priv->band = IEEE80211_BAND_2GHZ;
-
-	priv->iw_mode = NL80211_IFTYPE_STATION;
-
-	/* Choose which receivers/antennas to use */
-	if (priv->cfg->ops->hcmd->set_rxon_chain)
-		priv->cfg->ops->hcmd->set_rxon_chain(priv);
-
-	iwl_init_scan_params(priv);
-
-	iwl_reset_qos(priv);
-
-	priv->qos_data.qos_active = 0;
-	priv->qos_data.qos_cap.val = 0;
-
-	priv->rates_mask = IWL_RATES_MASK;
-	/* Set the tx_power_user_lmt to the lowest power level
-	 * this value will get overwritten by channel max power avg
-	 * from eeprom */
-	priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MIN;
-
-	ret = iwl_init_channel_map(priv);
-	if (ret) {
-		IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
-		goto err;
-	}
-
-	ret = iwlcore_init_geos(priv);
-	if (ret) {
-		IWL_ERR(priv, "initializing geos failed: %d\n", ret);
-		goto err_free_channel_map;
-	}
-	iwlcore_init_hw_rates(priv, priv->ieee_rates);
-
-	return 0;
-
-err_free_channel_map:
-	iwl_free_channel_map(priv);
-err:
-	return ret;
-}
-EXPORT_SYMBOL(iwl_init_drv);
-
 int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
 {
 	int ret = 0;
@@ -1676,15 +1649,6 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
 }
 EXPORT_SYMBOL(iwl_set_tx_power);
 
-void iwl_uninit_drv(struct iwl_priv *priv)
-{
-	iwl_calib_free_results(priv);
-	iwlcore_free_geos(priv);
-	iwl_free_channel_map(priv);
-	kfree(priv->scan);
-}
-EXPORT_SYMBOL(iwl_uninit_drv);
-
 #define ICT_COUNT (PAGE_SIZE/sizeof(u32))
 
 /* Free dram table */
@@ -2336,7 +2300,7 @@ static void iwl_ht_conf(struct iwl_priv *priv,
 	switch (priv->iw_mode) {
 	case NL80211_IFTYPE_STATION:
 		rcu_read_lock();
-		sta = ieee80211_find_sta(priv->hw, priv->bssid);
+		sta = ieee80211_find_sta(priv->vif, priv->bssid);
 		if (sta) {
 			struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
 			int maxstreams;
@@ -2346,6 +2310,12 @@ static void iwl_ht_conf(struct iwl_priv *priv,
 					>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
 			maxstreams += 1;
 
+			ht_conf->sm_ps =
+				(u8)((ht_cap->cap & IEEE80211_HT_CAP_SM_PS)
+				>> 2);
+			IWL_DEBUG_MAC80211(priv, "sm_ps: 0x%x\n",
+				ht_conf->sm_ps);
+
 			if ((ht_cap->mcs.rx_mask[1] == 0) &&
 			    (ht_cap->mcs.rx_mask[2] == 0))
 				ht_conf->single_chain_sufficient = true;
@@ -2926,6 +2896,34 @@ void iwl_free_txq_mem(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwl_free_txq_mem);
 
+int iwl_send_wimax_coex(struct iwl_priv *priv)
+{
+	struct iwl_wimax_coex_cmd uninitialized_var(coex_cmd);
+
+	if (priv->cfg->support_wimax_coexist) {
+		/* UnMask wake up src at associated sleep */
+		coex_cmd.flags |= COEX_FLAGS_ASSOC_WA_UNMASK_MSK;
+
+		/* UnMask wake up src at unassociated sleep */
+		coex_cmd.flags |= COEX_FLAGS_UNASSOC_WA_UNMASK_MSK;
+		memcpy(coex_cmd.sta_prio, cu_priorities,
+			sizeof(struct iwl_wimax_coex_event_entry) *
+			 COEX_NUM_OF_EVENTS);
+
+		/* enabling the coexistence feature */
+		coex_cmd.flags |= COEX_FLAGS_COEX_ENABLE_MSK;
+
+		/* enabling the priorities tables */
+		coex_cmd.flags |= COEX_FLAGS_STA_TABLE_VALID_MSK;
+	} else {
+		/* coexistence is disabled */
+		memset(&coex_cmd, 0, sizeof(coex_cmd));
+	}
+	return iwl_send_cmd_pdu(priv, COEX_PRIORITY_TABLE_CMD,
+				sizeof(coex_cmd), &coex_cmd);
+}
+EXPORT_SYMBOL(iwl_send_wimax_coex);
+
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 
 #define IWL_TRAFFIC_DUMP_SIZE	(IWL_TRAFFIC_ENTRY_SIZE * IWL_TRAFFIC_ENTRIES)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index b875dcfca2d..9574d8f3353 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -228,6 +228,8 @@ struct iwl_mod_params {
  * @chain_noise_num_beacons: number of beacons used to compute chain noise
  * @adv_thermal_throttle: support advance thermal throttle
  * @support_ct_kill_exit: support ct kill exit condition
+ * @support_sm_ps: support spatial multiplexing power save
+ * @support_wimax_coexist: support wimax/wifi co-exist
  *
  * We enable the driver to be backward compatible wrt API version. The
  * driver specifies which APIs it supports (with @ucode_api_max being the
@@ -283,6 +285,8 @@ struct iwl_cfg {
 	const bool supports_idle;
 	bool adv_thermal_throttle;
 	bool support_ct_kill_exit;
+	bool support_sm_ps;
+	const bool support_wimax_coexist;
 };
 
 /***************************
@@ -316,8 +320,6 @@ void iwl_configure_filter(struct ieee80211_hw *hw,
 			  unsigned int *total_flags, u64 multicast);
 int iwl_hw_nic_init(struct iwl_priv *priv);
 int iwl_set_hw_params(struct iwl_priv *priv);
-int iwl_init_drv(struct iwl_priv *priv);
-void iwl_uninit_drv(struct iwl_priv *priv);
 bool iwl_is_monitor_mode(struct iwl_priv *priv);
 void iwl_post_associate(struct iwl_priv *priv);
 void iwl_bss_info_changed(struct ieee80211_hw *hw,
@@ -340,6 +342,7 @@ int iwl_alloc_txq_mem(struct iwl_priv *priv);
 void iwl_free_txq_mem(struct iwl_priv *priv);
 void iwlcore_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
 				__le32 *tx_flags);
+int iwl_send_wimax_coex(struct iwl_priv *priv);
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 int iwl_alloc_traffic_mem(struct iwl_priv *priv);
 void iwl_free_traffic_mem(struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index e7ce6738766..cb2642c18da 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -517,6 +517,7 @@ struct iwl_ht_config {
 	bool is_ht;
 	bool is_40mhz;
 	bool single_chain_sufficient;
+	u8 sm_ps;
 	/* BSS related data */
 	u8 extension_chan_offset;
 	u8 ht_protection;
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 9429cb1c69b..8a0709e81a9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -533,6 +533,10 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 		goto err;
 	}
 	if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) {
+
+		/* OTP reads require powered-up chip */
+		priv->cfg->ops->lib->apm_ops.init(priv);
+
 		ret = iwl_init_otp_access(priv);
 		if (ret) {
 			IWL_ERR(priv, "Failed to initialize OTP access.\n");
@@ -563,6 +567,13 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 			e[cache_addr / 2] = eeprom_data;
 			cache_addr += sizeof(u16);
 		}
+
+		/*
+		 * Now that OTP reads are complete, reset chip to save
+		 *   power until we load uCode during "up".
+		 */
+		priv->cfg->ops->lib->apm_ops.stop(priv);
+
 	} else {
 		/* eeprom is an array of 16bit values */
 		for (addr = 0; addr < sz; addr += sizeof(u16)) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index f2a60dc4109..905645d15a9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -55,6 +55,8 @@ const char *get_cmd_string(u8 cmd)
 		IWL_CMD(REPLY_LEDS_CMD);
 		IWL_CMD(REPLY_TX_LINK_QUALITY_CMD);
 		IWL_CMD(COEX_PRIORITY_TABLE_CMD);
+		IWL_CMD(COEX_MEDIUM_NOTIFICATION);
+		IWL_CMD(COEX_EVENT_CMD);
 		IWL_CMD(RADAR_NOTIFICATION);
 		IWL_CMD(REPLY_QUIET_CMD);
 		IWL_CMD(REPLY_CHANNEL_SWITCH);
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 4fca65a2fe9..1eb0d0bf1fe 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -401,6 +401,7 @@ void iwl_init_scan_params(struct iwl_priv *priv)
 	if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
 		priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
 }
+EXPORT_SYMBOL(iwl_init_scan_params);
 
 static int iwl_scan_initiate(struct iwl_priv *priv)
 {
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index dc74c16d36a..eba36f73738 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -182,6 +182,11 @@ static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index,
 		goto done;
 
 	mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2;
+	IWL_DEBUG_ASSOC(priv, "spatial multiplexing power save mode: %s\n",
+			(mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ?
+			"static" :
+			(mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ?
+			"dynamic" : "disabled");
 
 	sta_flags = priv->stations[index].sta.station_flags;
 
@@ -1012,7 +1017,7 @@ int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap)
 	 */
 	if (priv->current_ht_config.is_ht) {
 		rcu_read_lock();
-		sta = ieee80211_find_sta(priv->hw, addr);
+		sta = ieee80211_find_sta(priv->vif, addr);
 		if (sta) {
 			memcpy(&ht_config, &sta->ht_cap, sizeof(ht_config));
 			cur_ht_config = &ht_config;
@@ -1030,6 +1035,68 @@ int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap)
 EXPORT_SYMBOL(iwl_rxon_add_station);
 
 /**
+ * iwl_sta_init_bcast_lq - Initialize a bcast station's hardware rate table
+ *
+ * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
+ *       calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
+ *       which requires station table entry to exist).
+ */
+static void iwl_sta_init_bcast_lq(struct iwl_priv *priv)
+{
+	int i, r;
+	struct iwl_link_quality_cmd link_cmd = {
+		.reserved1 = 0,
+	};
+	u32 rate_flags;
+
+	/* Set up the rate scaling to start at selected rate, fall back
+	 * all the way down to 1M in IEEE order, and then spin on 1M */
+	if (priv->band == IEEE80211_BAND_5GHZ)
+		r = IWL_RATE_6M_INDEX;
+	else
+		r = IWL_RATE_1M_INDEX;
+
+	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
+		rate_flags = 0;
+		if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE)
+			rate_flags |= RATE_MCS_CCK_MSK;
+
+		rate_flags |= first_antenna(priv->hw_params.valid_tx_ant) <<
+				RATE_MCS_ANT_POS;
+
+		link_cmd.rs_table[i].rate_n_flags =
+			iwl_hw_set_rate_n_flags(iwl_rates[r].plcp, rate_flags);
+		r = iwl_get_prev_ieee_rate(r);
+	}
+
+	link_cmd.general_params.single_stream_ant_msk =
+				first_antenna(priv->hw_params.valid_tx_ant);
+	link_cmd.general_params.dual_stream_ant_msk = 3;
+	link_cmd.agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
+	link_cmd.agg_params.agg_time_limit =
+		cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
+
+	/* Update the rate scaling for control frame Tx to AP */
+	link_cmd.sta_id = priv->hw_params.bcast_sta_id;
+
+	iwl_send_cmd_pdu_async(priv, REPLY_TX_LINK_QUALITY_CMD,
+			       sizeof(link_cmd), &link_cmd, NULL);
+}
+
+
+/**
+ * iwl_add_bcast_station - add broadcast station into station table.
+ */
+void iwl_add_bcast_station(struct iwl_priv *priv)
+{
+	iwl_add_station(priv, iwl_bcast_addr, false, CMD_SYNC, NULL);
+
+	/* Set up default rate scaling table in device's station table */
+	iwl_sta_init_bcast_lq(priv);
+}
+EXPORT_SYMBOL(iwl_add_bcast_station);
+
+/**
  * iwl_get_sta_id - Find station's index within station table
  *
  * If new IBSS station, create new entry in station table
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h
index 6deebade636..1c382de80d4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.h
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.h
@@ -52,6 +52,7 @@ void iwl_update_tkip_key(struct iwl_priv *priv,
 			const u8 *addr, u32 iv32, u16 *phase1key);
 
 int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap);
+void iwl_add_bcast_station(struct iwl_priv *priv);
 int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, bool is_ap);
 void iwl_clear_stations_table(struct iwl_priv *priv);
 int iwl_get_free_ucode_key_index(struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 8ae4c9b614e..05e75109d84 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -979,7 +979,8 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	       !(cmd->flags & CMD_SIZE_HUGE));
 
 	if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) {
-		IWL_DEBUG_INFO(priv, "Not sending command - RF/CT KILL\n");
+		IWL_WARN(priv, "Not sending command - %s KILL\n",
+			 iwl_is_rfkill(priv) ? "RF" : "CT");
 		return -EIO;
 	}
 
@@ -1121,11 +1122,6 @@ static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id,
 		return;
 	}
 
-	pci_unmap_single(priv->pci_dev,
-		pci_unmap_addr(&txq->meta[cmd_idx], mapping),
-		pci_unmap_len(&txq->meta[cmd_idx], len),
-		PCI_DMA_BIDIRECTIONAL);
-
 	for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
 	     q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
 
@@ -1173,6 +1169,11 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 	cmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index];
 	meta = &priv->txq[IWL_CMD_QUEUE_NUM].meta[cmd_index];
 
+	pci_unmap_single(priv->pci_dev,
+			 pci_unmap_addr(meta, mapping),
+			 pci_unmap_len(meta, len),
+			 PCI_DMA_BIDIRECTIONAL);
+
 	/* Input error checking is done when commands are added to queue. */
 	if (meta->flags & CMD_WANT_SKB) {
 		meta->source->reply_page = (unsigned long)rxb_addr(rxb);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index bfd7f497157..23b31e6dcac 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2160,6 +2160,14 @@ static int iwl3945_read_ucode(struct iwl_priv *priv)
 		IWL_UCODE_API(priv->ucode_ver),
 		IWL_UCODE_SERIAL(priv->ucode_ver));
 
+	snprintf(priv->hw->wiphy->fw_version,
+		 sizeof(priv->hw->wiphy->fw_version),
+		 "%u.%u.%u.%u",
+		 IWL_UCODE_MAJOR(priv->ucode_ver),
+		 IWL_UCODE_MINOR(priv->ucode_ver),
+		 IWL_UCODE_API(priv->ucode_ver),
+		 IWL_UCODE_SERIAL(priv->ucode_ver));
+
 	IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
 		       priv->ucode_ver);
 	IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
@@ -3992,13 +4000,6 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	 */
 	spin_lock_init(&priv->reg_lock);
 
-	/* amp init */
-	err = priv->cfg->ops->lib->apm_ops.init(priv);
-	if (err < 0) {
-		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
-		goto out_iounmap;
-	}
-
 	/***********************
 	 * 4. Read EEPROM
 	 * ********************/
diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig
index 9606b3100fd..b9d34a76696 100644
--- a/drivers/net/wireless/iwmc3200wifi/Kconfig
+++ b/drivers/net/wireless/iwmc3200wifi/Kconfig
@@ -1,6 +1,6 @@
 config IWM
 	tristate "Intel Wireless Multicomm 3200 WiFi driver"
-	depends on MMC && WLAN_80211 && EXPERIMENTAL
+	depends on MMC && EXPERIMENTAL
 	depends on CFG80211
 	select FW_LOADER
 	select IWMC3200TOP
diff --git a/drivers/net/wireless/libertas/Kconfig b/drivers/net/wireless/libertas/Kconfig
index 8f8d75b61ea..30aa9d48d67 100644
--- a/drivers/net/wireless/libertas/Kconfig
+++ b/drivers/net/wireless/libertas/Kconfig
@@ -1,6 +1,6 @@
 config LIBERTAS
 	tristate "Marvell 8xxx Libertas WLAN driver support"
-	depends on WLAN_80211 && CFG80211
+	depends on CFG80211
 	select WIRELESS_EXT
 	select WEXT_SPY
 	select LIB80211
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 30d9d0ea28e..d6a48dd3652 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -32,12 +32,6 @@
 #include "dev.h"
 #include "if_spi.h"
 
-struct if_spi_packet {
-	struct list_head		list;
-	u16				blen;
-	u8				buffer[0] __attribute__((aligned(4)));
-};
-
 struct if_spi_card {
 	struct spi_device		*spi;
 	struct lbs_private		*priv;
@@ -66,33 +60,10 @@ struct if_spi_card {
 	struct semaphore		spi_thread_terminated;
 
 	u8				cmd_buffer[IF_SPI_CMD_BUF_SIZE];
-
-	/* A buffer of incoming packets from libertas core.
-	 * Since we can't sleep in hw_host_to_card, we have to buffer
-	 * them. */
-	struct list_head		cmd_packet_list;
-	struct list_head		data_packet_list;
-
-	/* Protects cmd_packet_list and data_packet_list */
-	spinlock_t			buffer_lock;
 };
 
 static void free_if_spi_card(struct if_spi_card *card)
 {
-	struct list_head *cursor, *next;
-	struct if_spi_packet *packet;
-
-	BUG_ON(card->run_thread);
-	list_for_each_safe(cursor, next, &card->cmd_packet_list) {
-		packet = container_of(cursor, struct if_spi_packet, list);
-		list_del(&packet->list);
-		kfree(packet);
-	}
-	list_for_each_safe(cursor, next, &card->data_packet_list) {
-		packet = container_of(cursor, struct if_spi_packet, list);
-		list_del(&packet->list);
-		kfree(packet);
-	}
 	spi_set_drvdata(card->spi, NULL);
 	kfree(card);
 }
@@ -774,40 +745,6 @@ out:
 	return err;
 }
 
-/* Move data or a command from the host to the card. */
-static void if_spi_h2c(struct if_spi_card *card,
-			struct if_spi_packet *packet, int type)
-{
-	int err = 0;
-	u16 int_type, port_reg;
-
-	switch (type) {
-	case MVMS_DAT:
-		int_type = IF_SPI_CIC_TX_DOWNLOAD_OVER;
-		port_reg = IF_SPI_DATA_RDWRPORT_REG;
-		break;
-	case MVMS_CMD:
-		int_type = IF_SPI_CIC_CMD_DOWNLOAD_OVER;
-		port_reg = IF_SPI_CMD_RDWRPORT_REG;
-		break;
-	default:
-		lbs_pr_err("can't transfer buffer of type %d\n", type);
-		err = -EINVAL;
-		goto out;
-	}
-
-	/* Write the data to the card */
-	err = spu_write(card, port_reg, packet->buffer, packet->blen);
-	if (err)
-		goto out;
-
-out:
-	kfree(packet);
-
-	if (err)
-		lbs_pr_err("%s: error %d\n", __func__, err);
-}
-
 /* Inform the host about a card event */
 static void if_spi_e2h(struct if_spi_card *card)
 {
@@ -837,8 +774,6 @@ static int lbs_spi_thread(void *data)
 	int err;
 	struct if_spi_card *card = data;
 	u16 hiStatus;
-	unsigned long flags;
-	struct if_spi_packet *packet;
 
 	while (1) {
 		/* Wait to be woken up by one of two things.  First, our ISR
@@ -877,43 +812,9 @@ static int lbs_spi_thread(void *data)
 		if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY ||
 		   (card->priv->psstate != PS_STATE_FULL_POWER &&
 		    (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) {
-			/* This means two things. First of all,
-			 * if there was a previous command sent, the card has
-			 * successfully received it.
-			 * Secondly, it is now ready to download another
-			 * command.
-			 */
 			lbs_host_to_card_done(card->priv);
-
-			/* Do we have any command packets from the host to
-			 * send? */
-			packet = NULL;
-			spin_lock_irqsave(&card->buffer_lock, flags);
-			if (!list_empty(&card->cmd_packet_list)) {
-				packet = (struct if_spi_packet *)(card->
-						cmd_packet_list.next);
-				list_del(&packet->list);
-			}
-			spin_unlock_irqrestore(&card->buffer_lock, flags);
-
-			if (packet)
-				if_spi_h2c(card, packet, MVMS_CMD);
 		}
-		if (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY) {
-			/* Do we have any data packets from the host to
-			 * send? */
-			packet = NULL;
-			spin_lock_irqsave(&card->buffer_lock, flags);
-			if (!list_empty(&card->data_packet_list)) {
-				packet = (struct if_spi_packet *)(card->
-						data_packet_list.next);
-				list_del(&packet->list);
-			}
-			spin_unlock_irqrestore(&card->buffer_lock, flags);
 
-			if (packet)
-				if_spi_h2c(card, packet, MVMS_DAT);
-		}
 		if (hiStatus & IF_SPI_HIST_CARD_EVENT)
 			if_spi_e2h(card);
 
@@ -942,40 +843,18 @@ static int if_spi_host_to_card(struct lbs_private *priv,
 				u8 type, u8 *buf, u16 nb)
 {
 	int err = 0;
-	unsigned long flags;
 	struct if_spi_card *card = priv->card;
-	struct if_spi_packet *packet;
-	u16 blen;
 
 	lbs_deb_enter_args(LBS_DEB_SPI, "type %d, bytes %d", type, nb);
 
-	if (nb == 0) {
-		lbs_pr_err("%s: invalid size requested: %d\n", __func__, nb);
-		err = -EINVAL;
-		goto out;
-	}
-	blen = ALIGN(nb, 4);
-	packet = kzalloc(sizeof(struct if_spi_packet) + blen, GFP_ATOMIC);
-	if (!packet) {
-		err = -ENOMEM;
-		goto out;
-	}
-	packet->blen = blen;
-	memcpy(packet->buffer, buf, nb);
-	memset(packet->buffer + nb, 0, blen - nb);
+	nb = ALIGN(nb, 4);
 
 	switch (type) {
 	case MVMS_CMD:
-		priv->dnld_sent = DNLD_CMD_SENT;
-		spin_lock_irqsave(&card->buffer_lock, flags);
-		list_add_tail(&packet->list, &card->cmd_packet_list);
-		spin_unlock_irqrestore(&card->buffer_lock, flags);
+		err = spu_write(card, IF_SPI_CMD_RDWRPORT_REG, buf, nb);
 		break;
 	case MVMS_DAT:
-		priv->dnld_sent = DNLD_DATA_SENT;
-		spin_lock_irqsave(&card->buffer_lock, flags);
-		list_add_tail(&packet->list, &card->data_packet_list);
-		spin_unlock_irqrestore(&card->buffer_lock, flags);
+		err = spu_write(card, IF_SPI_DATA_RDWRPORT_REG, buf, nb);
 		break;
 	default:
 		lbs_pr_err("can't transfer buffer of type %d", type);
@@ -983,9 +862,6 @@ static int if_spi_host_to_card(struct lbs_private *priv,
 		break;
 	}
 
-	/* Wake up the spi thread */
-	up(&card->spi_ready);
-out:
 	lbs_deb_leave_args(LBS_DEB_SPI, "err=%d", err);
 	return err;
 }
@@ -1062,9 +938,6 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 
 	sema_init(&card->spi_ready, 0);
 	sema_init(&card->spi_thread_terminated, 0);
-	INIT_LIST_HEAD(&card->cmd_packet_list);
-	INIT_LIST_HEAD(&card->data_packet_list);
-	spin_lock_init(&card->buffer_lock);
 
 	/* Initialize the SPI Interface Unit */
 	err = spu_init(card, pdata->use_dummy_writes);
@@ -1141,6 +1014,9 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 		goto terminate_thread;
 	}
 
+	/* poke the IRQ handler so that we don't miss the first interrupt */
+	up(&card->spi_ready);
+
 	/* Start the card.
 	 * This will call register_netdev, and we'll start
 	 * getting interrupts... */
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 38cfd79e059..fc4ec48eda1 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -284,7 +284,7 @@ struct mac80211_hwsim_data {
 	struct ieee80211_channel *channel;
 	unsigned long beacon_int; /* in jiffies unit */
 	unsigned int rx_filter;
-	int started;
+	bool started, idle;
 	struct timer_list beacon_timer;
 	enum ps_mode {
 		PS_DISABLED, PS_ENABLED, PS_AUTO_POLL, PS_MANUAL_POLL
@@ -365,6 +365,49 @@ static void mac80211_hwsim_monitor_rx(struct ieee80211_hw *hw,
 }
 
 
+static void mac80211_hwsim_monitor_ack(struct ieee80211_hw *hw, const u8 *addr)
+{
+	struct mac80211_hwsim_data *data = hw->priv;
+	struct sk_buff *skb;
+	struct hwsim_radiotap_hdr *hdr;
+	u16 flags;
+	struct ieee80211_hdr *hdr11;
+
+	if (!netif_running(hwsim_mon))
+		return;
+
+	skb = dev_alloc_skb(100);
+	if (skb == NULL)
+		return;
+
+	hdr = (struct hwsim_radiotap_hdr *) skb_put(skb, sizeof(*hdr));
+	hdr->hdr.it_version = PKTHDR_RADIOTAP_VERSION;
+	hdr->hdr.it_pad = 0;
+	hdr->hdr.it_len = cpu_to_le16(sizeof(*hdr));
+	hdr->hdr.it_present = cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) |
+					  (1 << IEEE80211_RADIOTAP_CHANNEL));
+	hdr->rt_flags = 0;
+	hdr->rt_rate = 0;
+	hdr->rt_channel = cpu_to_le16(data->channel->center_freq);
+	flags = IEEE80211_CHAN_2GHZ;
+	hdr->rt_chbitmask = cpu_to_le16(flags);
+
+	hdr11 = (struct ieee80211_hdr *) skb_put(skb, 10);
+	hdr11->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL |
+					   IEEE80211_STYPE_ACK);
+	hdr11->duration_id = cpu_to_le16(0);
+	memcpy(hdr11->addr1, addr, ETH_ALEN);
+
+	skb->dev = hwsim_mon;
+	skb_set_mac_header(skb, 0);
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	skb->pkt_type = PACKET_OTHERHOST;
+	skb->protocol = htons(ETH_P_802_2);
+	memset(skb->cb, 0, sizeof(skb->cb));
+	netif_rx(skb);
+}
+
+
 static bool hwsim_ps_rx_ok(struct mac80211_hwsim_data *data,
 			   struct sk_buff *skb)
 {
@@ -402,6 +445,12 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_rx_status rx_status;
 
+	if (data->idle) {
+		printk(KERN_DEBUG "%s: Trying to TX when idle - reject\n",
+		       wiphy_name(hw->wiphy));
+		return false;
+	}
+
 	memset(&rx_status, 0, sizeof(rx_status));
 	/* TODO: set mactime */
 	rx_status.freq = data->channel->center_freq;
@@ -428,7 +477,8 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 		if (data == data2)
 			continue;
 
-		if (!data2->started || !hwsim_ps_rx_ok(data2, skb) ||
+		if (data2->idle || !data2->started ||
+		    !hwsim_ps_rx_ok(data2, skb) ||
 		    !data->channel || !data2->channel ||
 		    data->channel->center_freq != data2->channel->center_freq ||
 		    !(data->group & data2->group))
@@ -464,6 +514,10 @@ static int mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	}
 
 	ack = mac80211_hwsim_tx_frame(hw, skb);
+	if (ack && skb->len >= 16) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		mac80211_hwsim_monitor_ack(hw, hdr->addr2);
+	}
 
 	txi = IEEE80211_SKB_CB(skb);
 
@@ -571,6 +625,8 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
 	       !!(conf->flags & IEEE80211_CONF_IDLE),
 	       !!(conf->flags & IEEE80211_CONF_PS));
 
+	data->idle = !!(conf->flags & IEEE80211_CONF_IDLE);
+
 	data->channel = conf->channel;
 	if (!data->started || !data->beacon_int)
 		del_timer(&data->beacon_timer);
@@ -1045,19 +1101,20 @@ static int __init init_mac80211_hwsim(void)
 				sband->channels = data->channels_2ghz;
 				sband->n_channels =
 					ARRAY_SIZE(hwsim_channels_2ghz);
+				sband->bitrates = data->rates;
+				sband->n_bitrates = ARRAY_SIZE(hwsim_rates);
 				break;
 			case IEEE80211_BAND_5GHZ:
 				sband->channels = data->channels_5ghz;
 				sband->n_channels =
 					ARRAY_SIZE(hwsim_channels_5ghz);
+				sband->bitrates = data->rates + 4;
+				sband->n_bitrates = ARRAY_SIZE(hwsim_rates) - 4;
 				break;
 			default:
 				break;
 			}
 
-			sband->bitrates = data->rates;
-			sband->n_bitrates = ARRAY_SIZE(hwsim_rates);
-
 			sband->ht_cap.ht_supported = true;
 			sband->ht_cap.cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
 				IEEE80211_HT_CAP_GRN_FLD |
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 746532ebe5a..2ebfee4da3f 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
 #include <linux/pci.h>
@@ -27,18 +28,6 @@
 #define MWL8K_NAME	KBUILD_MODNAME
 #define MWL8K_VERSION	"0.10"
 
-MODULE_DESCRIPTION(MWL8K_DESC);
-MODULE_VERSION(MWL8K_VERSION);
-MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com>");
-MODULE_LICENSE("GPL");
-
-static DEFINE_PCI_DEVICE_TABLE(mwl8k_table) = {
-	{ PCI_VDEVICE(MARVELL, 0x2a2b), .driver_data = 8687, },
-	{ PCI_VDEVICE(MARVELL, 0x2a30), .driver_data = 8687, },
-	{ }
-};
-MODULE_DEVICE_TABLE(pci, mwl8k_table);
-
 /* Register definitions */
 #define MWL8K_HIU_GEN_PTR			0x00000c10
 #define  MWL8K_MODE_STA				 0x0000005a
@@ -88,72 +77,89 @@ MODULE_DEVICE_TABLE(pci, mwl8k_table);
 				 MWL8K_A2H_INT_RX_READY | \
 				 MWL8K_A2H_INT_TX_DONE)
 
-/* WME stream classes */
-#define WME_AC_BE	0		/* best effort */
-#define WME_AC_BK	1		/* background */
-#define WME_AC_VI	2		/* video */
-#define WME_AC_VO	3		/* voice */
-
 #define MWL8K_RX_QUEUES		1
 #define MWL8K_TX_QUEUES		4
 
+struct rxd_ops {
+	int rxd_size;
+	void (*rxd_init)(void *rxd, dma_addr_t next_dma_addr);
+	void (*rxd_refill)(void *rxd, dma_addr_t addr, int len);
+	int (*rxd_process)(void *rxd, struct ieee80211_rx_status *status);
+};
+
+struct mwl8k_device_info {
+	char *part_name;
+	char *helper_image;
+	char *fw_image;
+	struct rxd_ops *rxd_ops;
+	u16 modes;
+};
+
 struct mwl8k_rx_queue {
-	int rx_desc_count;
+	int rxd_count;
 
 	/* hw receives here */
-	int rx_head;
+	int head;
 
 	/* refill descs here */
-	int rx_tail;
+	int tail;
 
-	struct mwl8k_rx_desc *rx_desc_area;
-	dma_addr_t rx_desc_dma;
-	struct sk_buff **rx_skb;
+	void *rxd;
+	dma_addr_t rxd_dma;
+	struct {
+		struct sk_buff *skb;
+		DECLARE_PCI_UNMAP_ADDR(dma)
+	} *buf;
 };
 
 struct mwl8k_tx_queue {
 	/* hw transmits here */
-	int tx_head;
+	int head;
 
 	/* sw appends here */
-	int tx_tail;
+	int tail;
 
-	struct ieee80211_tx_queue_stats tx_stats;
-	struct mwl8k_tx_desc *tx_desc_area;
-	dma_addr_t tx_desc_dma;
-	struct sk_buff **tx_skb;
+	struct ieee80211_tx_queue_stats stats;
+	struct mwl8k_tx_desc *txd;
+	dma_addr_t txd_dma;
+	struct sk_buff **skb;
 };
 
 /* Pointers to the firmware data and meta information about it.  */
 struct mwl8k_firmware {
-	/* Microcode */
-	struct firmware *ucode;
-
 	/* Boot helper code */
 	struct firmware *helper;
+
+	/* Microcode */
+	struct firmware *ucode;
 };
 
 struct mwl8k_priv {
+	void __iomem *sram;
 	void __iomem *regs;
 	struct ieee80211_hw *hw;
 
 	struct pci_dev *pdev;
-	u8 name[16];
+
+	struct mwl8k_device_info *device_info;
+	bool ap_fw;
+	struct rxd_ops *rxd_ops;
 
 	/* firmware files and meta data */
 	struct mwl8k_firmware fw;
-	u32 part_num;
 
 	/* firmware access */
 	struct mutex fw_mutex;
 	struct task_struct *fw_mutex_owner;
 	int fw_mutex_depth;
-	struct completion *tx_wait;
 	struct completion *hostcmd_wait;
 
 	/* lock held over TX and TX reap */
 	spinlock_t tx_lock;
 
+	/* TX quiesce completion, protected by fw_mutex and tx_lock */
+	struct completion *tx_wait;
+
 	struct ieee80211_vif *vif;
 
 	struct ieee80211_channel *current_channel;
@@ -178,10 +184,11 @@ struct mwl8k_priv {
 	/* PHY parameters */
 	struct ieee80211_supported_band band;
 	struct ieee80211_channel channels[14];
-	struct ieee80211_rate rates[12];
+	struct ieee80211_rate rates[13];
 
 	bool radio_on;
 	bool radio_short_preamble;
+	bool sniffer_enabled;
 	bool wmm_enabled;
 
 	/* XXX need to convert this to handle multiple interfaces */
@@ -199,9 +206,6 @@ struct mwl8k_priv {
 
 	/* Tasklet to reclaim TX descriptors and buffers after tx */
 	struct tasklet_struct tx_reclaim_task;
-
-	/* Work thread to serialize configuration requests */
-	struct workqueue_struct *config_wq;
 };
 
 /* Per interface specific private data */
@@ -220,7 +224,7 @@ struct mwl8k_vif {
 	 * Subset of supported legacy rates.
 	 * Intersection of AP and STA supported rates.
 	 */
-	struct ieee80211_rate legacy_rates[12];
+	struct ieee80211_rate legacy_rates[13];
 
 	/* number of supported legacy rates */
 	u8	legacy_nrates;
@@ -252,9 +256,10 @@ static const struct ieee80211_rate mwl8k_rates[] = {
 	{ .bitrate = 10, .hw_value = 2, },
 	{ .bitrate = 20, .hw_value = 4, },
 	{ .bitrate = 55, .hw_value = 11, },
+	{ .bitrate = 110, .hw_value = 22, },
+	{ .bitrate = 220, .hw_value = 44, },
 	{ .bitrate = 60, .hw_value = 12, },
 	{ .bitrate = 90, .hw_value = 18, },
-	{ .bitrate = 110, .hw_value = 22, },
 	{ .bitrate = 120, .hw_value = 24, },
 	{ .bitrate = 180, .hw_value = 36, },
 	{ .bitrate = 240, .hw_value = 48, },
@@ -270,10 +275,12 @@ static const struct ieee80211_rate mwl8k_rates[] = {
 /* Firmware command codes */
 #define MWL8K_CMD_CODE_DNLD		0x0001
 #define MWL8K_CMD_GET_HW_SPEC		0x0003
+#define MWL8K_CMD_SET_HW_SPEC		0x0004
 #define MWL8K_CMD_MAC_MULTICAST_ADR	0x0010
 #define MWL8K_CMD_GET_STAT		0x0014
 #define MWL8K_CMD_RADIO_CONTROL		0x001c
 #define MWL8K_CMD_RF_TX_POWER		0x001e
+#define MWL8K_CMD_RF_ANTENNA		0x0020
 #define MWL8K_CMD_SET_PRE_SCAN		0x0107
 #define MWL8K_CMD_SET_POST_SCAN		0x0108
 #define MWL8K_CMD_SET_RF_CHANNEL	0x010a
@@ -287,6 +294,7 @@ static const struct ieee80211_rate mwl8k_rates[] = {
 #define MWL8K_CMD_MIMO_CONFIG		0x0125
 #define MWL8K_CMD_USE_FIXED_RATE	0x0126
 #define MWL8K_CMD_ENABLE_SNIFFER	0x0150
+#define MWL8K_CMD_SET_MAC_ADDR		0x0202
 #define MWL8K_CMD_SET_RATEADAPT_MODE	0x0203
 #define MWL8K_CMD_UPDATE_STADB		0x1123
 
@@ -299,10 +307,12 @@ static const char *mwl8k_cmd_name(u16 cmd, char *buf, int bufsize)
 	switch (cmd & ~0x8000) {
 		MWL8K_CMDNAME(CODE_DNLD);
 		MWL8K_CMDNAME(GET_HW_SPEC);
+		MWL8K_CMDNAME(SET_HW_SPEC);
 		MWL8K_CMDNAME(MAC_MULTICAST_ADR);
 		MWL8K_CMDNAME(GET_STAT);
 		MWL8K_CMDNAME(RADIO_CONTROL);
 		MWL8K_CMDNAME(RF_TX_POWER);
+		MWL8K_CMDNAME(RF_ANTENNA);
 		MWL8K_CMDNAME(SET_PRE_SCAN);
 		MWL8K_CMDNAME(SET_POST_SCAN);
 		MWL8K_CMDNAME(SET_RF_CHANNEL);
@@ -316,6 +326,7 @@ static const char *mwl8k_cmd_name(u16 cmd, char *buf, int bufsize)
 		MWL8K_CMDNAME(MIMO_CONFIG);
 		MWL8K_CMDNAME(USE_FIXED_RATE);
 		MWL8K_CMDNAME(ENABLE_SNIFFER);
+		MWL8K_CMDNAME(SET_MAC_ADDR);
 		MWL8K_CMDNAME(SET_RATEADAPT_MODE);
 		MWL8K_CMDNAME(UPDATE_STADB);
 	default:
@@ -353,41 +364,35 @@ static void mwl8k_release_firmware(struct mwl8k_priv *priv)
 
 /* Request fw image */
 static int mwl8k_request_fw(struct mwl8k_priv *priv,
-				const char *fname, struct firmware **fw)
+			    const char *fname, struct firmware **fw)
 {
 	/* release current image */
 	if (*fw != NULL)
 		mwl8k_release_fw(fw);
 
 	return request_firmware((const struct firmware **)fw,
-						fname, &priv->pdev->dev);
+				fname, &priv->pdev->dev);
 }
 
-static int mwl8k_request_firmware(struct mwl8k_priv *priv, u32 part_num)
+static int mwl8k_request_firmware(struct mwl8k_priv *priv)
 {
-	u8 filename[64];
+	struct mwl8k_device_info *di = priv->device_info;
 	int rc;
 
-	priv->part_num = part_num;
-
-	snprintf(filename, sizeof(filename),
-		 "mwl8k/helper_%u.fw", priv->part_num);
-
-	rc = mwl8k_request_fw(priv, filename, &priv->fw.helper);
-	if (rc) {
-		printk(KERN_ERR
-			"%s Error requesting helper firmware file %s\n",
-			pci_name(priv->pdev), filename);
-		return rc;
+	if (di->helper_image != NULL) {
+		rc = mwl8k_request_fw(priv, di->helper_image, &priv->fw.helper);
+		if (rc) {
+			printk(KERN_ERR "%s: Error requesting helper "
+			       "firmware file %s\n", pci_name(priv->pdev),
+			       di->helper_image);
+			return rc;
+		}
 	}
 
-	snprintf(filename, sizeof(filename),
-		 "mwl8k/fmimage_%u.fw", priv->part_num);
-
-	rc = mwl8k_request_fw(priv, filename, &priv->fw.ucode);
+	rc = mwl8k_request_fw(priv, di->fw_image, &priv->fw.ucode);
 	if (rc) {
-		printk(KERN_ERR "%s Error requesting firmware file %s\n",
-					pci_name(priv->pdev), filename);
+		printk(KERN_ERR "%s: Error requesting firmware file %s\n",
+		       pci_name(priv->pdev), di->fw_image);
 		mwl8k_release_fw(&priv->fw.helper);
 		return rc;
 	}
@@ -434,6 +439,7 @@ mwl8k_send_fw_load_cmd(struct mwl8k_priv *priv, void *data, int length)
 			break;
 		}
 
+		cond_resched();
 		udelay(1);
 	} while (--loops);
 
@@ -542,43 +548,62 @@ static int mwl8k_feed_fw_image(struct mwl8k_priv *priv,
 	return rc;
 }
 
-static int mwl8k_load_firmware(struct mwl8k_priv *priv)
+static int mwl8k_load_firmware(struct ieee80211_hw *hw)
 {
-	int loops, rc;
+	struct mwl8k_priv *priv = hw->priv;
+	struct firmware *fw = priv->fw.ucode;
+	struct mwl8k_device_info *di = priv->device_info;
+	int rc;
+	int loops;
+
+	if (!memcmp(fw->data, "\x01\x00\x00\x00", 4)) {
+		struct firmware *helper = priv->fw.helper;
 
-	const u8 *ucode = priv->fw.ucode->data;
-	size_t ucode_len = priv->fw.ucode->size;
-	const u8 *helper = priv->fw.helper->data;
-	size_t helper_len = priv->fw.helper->size;
+		if (helper == NULL) {
+			printk(KERN_ERR "%s: helper image needed but none "
+			       "given\n", pci_name(priv->pdev));
+			return -EINVAL;
+		}
 
-	if (!memcmp(ucode, "\x01\x00\x00\x00", 4)) {
-		rc = mwl8k_load_fw_image(priv, helper, helper_len);
+		rc = mwl8k_load_fw_image(priv, helper->data, helper->size);
 		if (rc) {
 			printk(KERN_ERR "%s: unable to load firmware "
-				"helper image\n", pci_name(priv->pdev));
+			       "helper image\n", pci_name(priv->pdev));
 			return rc;
 		}
 		msleep(1);
 
-		rc = mwl8k_feed_fw_image(priv, ucode, ucode_len);
+		rc = mwl8k_feed_fw_image(priv, fw->data, fw->size);
 	} else {
-		rc = mwl8k_load_fw_image(priv, ucode, ucode_len);
+		rc = mwl8k_load_fw_image(priv, fw->data, fw->size);
 	}
 
 	if (rc) {
-		printk(KERN_ERR "%s: unable to load firmware data\n",
-			pci_name(priv->pdev));
+		printk(KERN_ERR "%s: unable to load firmware image\n",
+		       pci_name(priv->pdev));
 		return rc;
 	}
 
-	iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR);
+	if (di->modes & BIT(NL80211_IFTYPE_AP))
+		iowrite32(MWL8K_MODE_AP, priv->regs + MWL8K_HIU_GEN_PTR);
+	else
+		iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR);
 	msleep(1);
 
 	loops = 200000;
 	do {
-		if (ioread32(priv->regs + MWL8K_HIU_INT_CODE)
-						== MWL8K_FWSTA_READY)
+		u32 ready_code;
+
+		ready_code = ioread32(priv->regs + MWL8K_HIU_INT_CODE);
+		if (ready_code == MWL8K_FWAP_READY) {
+			priv->ap_fw = 1;
 			break;
+		} else if (ready_code == MWL8K_FWSTA_READY) {
+			priv->ap_fw = 0;
+			break;
+		}
+
+		cond_resched();
 		udelay(1);
 	} while (--loops);
 
@@ -605,7 +630,7 @@ struct ewc_ht_info {
 /* Peer Entry flags - used to define the type of the peer node */
 #define MWL8K_PEER_TYPE_ACCESSPOINT	2
 
-#define MWL8K_IEEE_LEGACY_DATA_RATES	12
+#define MWL8K_IEEE_LEGACY_DATA_RATES	13
 #define MWL8K_MCS_BITMAP_SIZE		16
 
 struct peer_capability_info {
@@ -731,16 +756,96 @@ static inline void mwl8k_add_dma_header(struct sk_buff *skb)
 
 
 /*
- * Packet reception.
+ * Packet reception for 88w8366.
  */
-#define MWL8K_RX_CTRL_OWNED_BY_HOST	0x02
+struct mwl8k_rxd_8366 {
+	__le16 pkt_len;
+	__u8 sq2;
+	__u8 rate;
+	__le32 pkt_phys_addr;
+	__le32 next_rxd_phys_addr;
+	__le16 qos_control;
+	__le16 htsig2;
+	__le32 hw_rssi_info;
+	__le32 hw_noise_floor_info;
+	__u8 noise_floor;
+	__u8 pad0[3];
+	__u8 rssi;
+	__u8 rx_status;
+	__u8 channel;
+	__u8 rx_ctrl;
+} __attribute__((packed));
 
-struct mwl8k_rx_desc {
+#define MWL8K_8366_RX_CTRL_OWNED_BY_HOST	0x80
+
+static void mwl8k_rxd_8366_init(void *_rxd, dma_addr_t next_dma_addr)
+{
+	struct mwl8k_rxd_8366 *rxd = _rxd;
+
+	rxd->next_rxd_phys_addr = cpu_to_le32(next_dma_addr);
+	rxd->rx_ctrl = MWL8K_8366_RX_CTRL_OWNED_BY_HOST;
+}
+
+static void mwl8k_rxd_8366_refill(void *_rxd, dma_addr_t addr, int len)
+{
+	struct mwl8k_rxd_8366 *rxd = _rxd;
+
+	rxd->pkt_len = cpu_to_le16(len);
+	rxd->pkt_phys_addr = cpu_to_le32(addr);
+	wmb();
+	rxd->rx_ctrl = 0;
+}
+
+static int
+mwl8k_rxd_8366_process(void *_rxd, struct ieee80211_rx_status *status)
+{
+	struct mwl8k_rxd_8366 *rxd = _rxd;
+
+	if (!(rxd->rx_ctrl & MWL8K_8366_RX_CTRL_OWNED_BY_HOST))
+		return -1;
+	rmb();
+
+	memset(status, 0, sizeof(*status));
+
+	status->signal = -rxd->rssi;
+	status->noise = -rxd->noise_floor;
+
+	if (rxd->rate & 0x80) {
+		status->flag |= RX_FLAG_HT;
+		status->rate_idx = rxd->rate & 0x7f;
+	} else {
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(mwl8k_rates); i++) {
+			if (mwl8k_rates[i].hw_value == rxd->rate) {
+				status->rate_idx = i;
+				break;
+			}
+		}
+	}
+
+	status->band = IEEE80211_BAND_2GHZ;
+	status->freq = ieee80211_channel_to_frequency(rxd->channel);
+
+	return le16_to_cpu(rxd->pkt_len);
+}
+
+static struct rxd_ops rxd_8366_ops = {
+	.rxd_size	= sizeof(struct mwl8k_rxd_8366),
+	.rxd_init	= mwl8k_rxd_8366_init,
+	.rxd_refill	= mwl8k_rxd_8366_refill,
+	.rxd_process	= mwl8k_rxd_8366_process,
+};
+
+/*
+ * Packet reception for 88w8687.
+ */
+struct mwl8k_rxd_8687 {
 	__le16 pkt_len;
 	__u8 link_quality;
 	__u8 noise_level;
 	__le32 pkt_phys_addr;
-	__le32 next_rx_desc_phys_addr;
+	__le32 next_rxd_phys_addr;
 	__le16 qos_control;
 	__le16 rate_info;
 	__le32 pad0[4];
@@ -752,6 +857,76 @@ struct mwl8k_rx_desc {
 	__u8 pad2[2];
 } __attribute__((packed));
 
+#define MWL8K_8687_RATE_INFO_SHORTPRE		0x8000
+#define MWL8K_8687_RATE_INFO_ANTSELECT(x)	(((x) >> 11) & 0x3)
+#define MWL8K_8687_RATE_INFO_RATEID(x)		(((x) >> 3) & 0x3f)
+#define MWL8K_8687_RATE_INFO_40MHZ		0x0004
+#define MWL8K_8687_RATE_INFO_SHORTGI		0x0002
+#define MWL8K_8687_RATE_INFO_MCS_FORMAT		0x0001
+
+#define MWL8K_8687_RX_CTRL_OWNED_BY_HOST	0x02
+
+static void mwl8k_rxd_8687_init(void *_rxd, dma_addr_t next_dma_addr)
+{
+	struct mwl8k_rxd_8687 *rxd = _rxd;
+
+	rxd->next_rxd_phys_addr = cpu_to_le32(next_dma_addr);
+	rxd->rx_ctrl = MWL8K_8687_RX_CTRL_OWNED_BY_HOST;
+}
+
+static void mwl8k_rxd_8687_refill(void *_rxd, dma_addr_t addr, int len)
+{
+	struct mwl8k_rxd_8687 *rxd = _rxd;
+
+	rxd->pkt_len = cpu_to_le16(len);
+	rxd->pkt_phys_addr = cpu_to_le32(addr);
+	wmb();
+	rxd->rx_ctrl = 0;
+}
+
+static int
+mwl8k_rxd_8687_process(void *_rxd, struct ieee80211_rx_status *status)
+{
+	struct mwl8k_rxd_8687 *rxd = _rxd;
+	u16 rate_info;
+
+	if (!(rxd->rx_ctrl & MWL8K_8687_RX_CTRL_OWNED_BY_HOST))
+		return -1;
+	rmb();
+
+	rate_info = le16_to_cpu(rxd->rate_info);
+
+	memset(status, 0, sizeof(*status));
+
+	status->signal = -rxd->rssi;
+	status->noise = -rxd->noise_level;
+	status->qual = rxd->link_quality;
+	status->antenna = MWL8K_8687_RATE_INFO_ANTSELECT(rate_info);
+	status->rate_idx = MWL8K_8687_RATE_INFO_RATEID(rate_info);
+
+	if (rate_info & MWL8K_8687_RATE_INFO_SHORTPRE)
+		status->flag |= RX_FLAG_SHORTPRE;
+	if (rate_info & MWL8K_8687_RATE_INFO_40MHZ)
+		status->flag |= RX_FLAG_40MHZ;
+	if (rate_info & MWL8K_8687_RATE_INFO_SHORTGI)
+		status->flag |= RX_FLAG_SHORT_GI;
+	if (rate_info & MWL8K_8687_RATE_INFO_MCS_FORMAT)
+		status->flag |= RX_FLAG_HT;
+
+	status->band = IEEE80211_BAND_2GHZ;
+	status->freq = ieee80211_channel_to_frequency(rxd->channel);
+
+	return le16_to_cpu(rxd->pkt_len);
+}
+
+static struct rxd_ops rxd_8687_ops = {
+	.rxd_size	= sizeof(struct mwl8k_rxd_8687),
+	.rxd_init	= mwl8k_rxd_8687_init,
+	.rxd_refill	= mwl8k_rxd_8687_refill,
+	.rxd_process	= mwl8k_rxd_8687_process,
+};
+
+
 #define MWL8K_RX_DESCS		256
 #define MWL8K_RX_MAXSZ		3800
 
@@ -762,43 +937,44 @@ static int mwl8k_rxq_init(struct ieee80211_hw *hw, int index)
 	int size;
 	int i;
 
-	rxq->rx_desc_count = 0;
-	rxq->rx_head = 0;
-	rxq->rx_tail = 0;
+	rxq->rxd_count = 0;
+	rxq->head = 0;
+	rxq->tail = 0;
 
-	size = MWL8K_RX_DESCS * sizeof(struct mwl8k_rx_desc);
+	size = MWL8K_RX_DESCS * priv->rxd_ops->rxd_size;
 
-	rxq->rx_desc_area =
-		pci_alloc_consistent(priv->pdev, size, &rxq->rx_desc_dma);
-	if (rxq->rx_desc_area == NULL) {
+	rxq->rxd = pci_alloc_consistent(priv->pdev, size, &rxq->rxd_dma);
+	if (rxq->rxd == NULL) {
 		printk(KERN_ERR "%s: failed to alloc RX descriptors\n",
-		       priv->name);
+		       wiphy_name(hw->wiphy));
 		return -ENOMEM;
 	}
-	memset(rxq->rx_desc_area, 0, size);
+	memset(rxq->rxd, 0, size);
 
-	rxq->rx_skb = kmalloc(MWL8K_RX_DESCS *
-				sizeof(*rxq->rx_skb), GFP_KERNEL);
-	if (rxq->rx_skb == NULL) {
+	rxq->buf = kmalloc(MWL8K_RX_DESCS * sizeof(*rxq->buf), GFP_KERNEL);
+	if (rxq->buf == NULL) {
 		printk(KERN_ERR "%s: failed to alloc RX skbuff list\n",
-			priv->name);
-		pci_free_consistent(priv->pdev, size,
-				    rxq->rx_desc_area, rxq->rx_desc_dma);
+		       wiphy_name(hw->wiphy));
+		pci_free_consistent(priv->pdev, size, rxq->rxd, rxq->rxd_dma);
 		return -ENOMEM;
 	}
-	memset(rxq->rx_skb, 0, MWL8K_RX_DESCS * sizeof(*rxq->rx_skb));
+	memset(rxq->buf, 0, MWL8K_RX_DESCS * sizeof(*rxq->buf));
 
 	for (i = 0; i < MWL8K_RX_DESCS; i++) {
-		struct mwl8k_rx_desc *rx_desc;
+		int desc_size;
+		void *rxd;
 		int nexti;
+		dma_addr_t next_dma_addr;
 
-		rx_desc = rxq->rx_desc_area + i;
-		nexti = (i + 1) % MWL8K_RX_DESCS;
+		desc_size = priv->rxd_ops->rxd_size;
+		rxd = rxq->rxd + (i * priv->rxd_ops->rxd_size);
 
-		rx_desc->next_rx_desc_phys_addr =
-			cpu_to_le32(rxq->rx_desc_dma
-						+ nexti * sizeof(*rx_desc));
-		rx_desc->rx_ctrl = MWL8K_RX_CTRL_OWNED_BY_HOST;
+		nexti = i + 1;
+		if (nexti == MWL8K_RX_DESCS)
+			nexti = 0;
+		next_dma_addr = rxq->rxd_dma + (nexti * desc_size);
+
+		priv->rxd_ops->rxd_init(rxd, next_dma_addr);
 	}
 
 	return 0;
@@ -811,27 +987,28 @@ static int rxq_refill(struct ieee80211_hw *hw, int index, int limit)
 	int refilled;
 
 	refilled = 0;
-	while (rxq->rx_desc_count < MWL8K_RX_DESCS && limit--) {
+	while (rxq->rxd_count < MWL8K_RX_DESCS && limit--) {
 		struct sk_buff *skb;
+		dma_addr_t addr;
 		int rx;
+		void *rxd;
 
 		skb = dev_alloc_skb(MWL8K_RX_MAXSZ);
 		if (skb == NULL)
 			break;
 
-		rxq->rx_desc_count++;
-
-		rx = rxq->rx_tail;
-		rxq->rx_tail = (rx + 1) % MWL8K_RX_DESCS;
+		addr = pci_map_single(priv->pdev, skb->data,
+				      MWL8K_RX_MAXSZ, DMA_FROM_DEVICE);
 
-		rxq->rx_desc_area[rx].pkt_phys_addr =
-			cpu_to_le32(pci_map_single(priv->pdev, skb->data,
-					MWL8K_RX_MAXSZ, DMA_FROM_DEVICE));
+		rxq->rxd_count++;
+		rx = rxq->tail++;
+		if (rxq->tail == MWL8K_RX_DESCS)
+			rxq->tail = 0;
+		rxq->buf[rx].skb = skb;
+		pci_unmap_addr_set(&rxq->buf[rx], dma, addr);
 
-		rxq->rx_desc_area[rx].pkt_len = cpu_to_le16(MWL8K_RX_MAXSZ);
-		rxq->rx_skb[rx] = skb;
-		wmb();
-		rxq->rx_desc_area[rx].rx_ctrl = 0;
+		rxd = rxq->rxd + (rx * priv->rxd_ops->rxd_size);
+		priv->rxd_ops->rxd_refill(rxd, addr, MWL8K_RX_MAXSZ);
 
 		refilled++;
 	}
@@ -847,24 +1024,24 @@ static void mwl8k_rxq_deinit(struct ieee80211_hw *hw, int index)
 	int i;
 
 	for (i = 0; i < MWL8K_RX_DESCS; i++) {
-		if (rxq->rx_skb[i] != NULL) {
-			unsigned long addr;
-
-			addr = le32_to_cpu(rxq->rx_desc_area[i].pkt_phys_addr);
-			pci_unmap_single(priv->pdev, addr, MWL8K_RX_MAXSZ,
-					 PCI_DMA_FROMDEVICE);
-			kfree_skb(rxq->rx_skb[i]);
-			rxq->rx_skb[i] = NULL;
+		if (rxq->buf[i].skb != NULL) {
+			pci_unmap_single(priv->pdev,
+					 pci_unmap_addr(&rxq->buf[i], dma),
+					 MWL8K_RX_MAXSZ, PCI_DMA_FROMDEVICE);
+			pci_unmap_addr_set(&rxq->buf[i], dma, 0);
+
+			kfree_skb(rxq->buf[i].skb);
+			rxq->buf[i].skb = NULL;
 		}
 	}
 
-	kfree(rxq->rx_skb);
-	rxq->rx_skb = NULL;
+	kfree(rxq->buf);
+	rxq->buf = NULL;
 
 	pci_free_consistent(priv->pdev,
-			    MWL8K_RX_DESCS * sizeof(struct mwl8k_rx_desc),
-			    rxq->rx_desc_area, rxq->rx_desc_dma);
-	rxq->rx_desc_area = NULL;
+			    MWL8K_RX_DESCS * priv->rxd_ops->rxd_size,
+			    rxq->rxd, rxq->rxd_dma);
+	rxq->rxd = NULL;
 }
 
 
@@ -880,9 +1057,11 @@ mwl8k_capture_bssid(struct mwl8k_priv *priv, struct ieee80211_hdr *wh)
 		!compare_ether_addr(wh->addr3, priv->capture_bssid);
 }
 
-static inline void mwl8k_save_beacon(struct mwl8k_priv *priv,
-							struct sk_buff *skb)
+static inline void mwl8k_save_beacon(struct ieee80211_hw *hw,
+				     struct sk_buff *skb)
 {
+	struct mwl8k_priv *priv = hw->priv;
+
 	priv->capture_beacon = false;
 	memset(priv->capture_bssid, 0, ETH_ALEN);
 
@@ -893,8 +1072,7 @@ static inline void mwl8k_save_beacon(struct mwl8k_priv *priv,
 	 */
 	priv->beacon_skb = skb_copy(skb, GFP_ATOMIC);
 	if (priv->beacon_skb != NULL)
-		queue_work(priv->config_wq,
-				&priv->finalize_join_worker);
+		ieee80211_queue_work(hw, &priv->finalize_join_worker);
 }
 
 static int rxq_process(struct ieee80211_hw *hw, int index, int limit)
@@ -904,53 +1082,46 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit)
 	int processed;
 
 	processed = 0;
-	while (rxq->rx_desc_count && limit--) {
-		struct mwl8k_rx_desc *rx_desc;
+	while (rxq->rxd_count && limit--) {
 		struct sk_buff *skb;
+		void *rxd;
+		int pkt_len;
 		struct ieee80211_rx_status status;
-		unsigned long addr;
-		struct ieee80211_hdr *wh;
 
-		rx_desc = rxq->rx_desc_area + rxq->rx_head;
-		if (!(rx_desc->rx_ctrl & MWL8K_RX_CTRL_OWNED_BY_HOST))
+		skb = rxq->buf[rxq->head].skb;
+		if (skb == NULL)
 			break;
-		rmb();
 
-		skb = rxq->rx_skb[rxq->rx_head];
-		if (skb == NULL)
+		rxd = rxq->rxd + (rxq->head * priv->rxd_ops->rxd_size);
+
+		pkt_len = priv->rxd_ops->rxd_process(rxd, &status);
+		if (pkt_len < 0)
 			break;
-		rxq->rx_skb[rxq->rx_head] = NULL;
 
-		rxq->rx_head = (rxq->rx_head + 1) % MWL8K_RX_DESCS;
-		rxq->rx_desc_count--;
+		rxq->buf[rxq->head].skb = NULL;
 
-		addr = le32_to_cpu(rx_desc->pkt_phys_addr);
-		pci_unmap_single(priv->pdev, addr,
-					MWL8K_RX_MAXSZ, PCI_DMA_FROMDEVICE);
+		pci_unmap_single(priv->pdev,
+				 pci_unmap_addr(&rxq->buf[rxq->head], dma),
+				 MWL8K_RX_MAXSZ, PCI_DMA_FROMDEVICE);
+		pci_unmap_addr_set(&rxq->buf[rxq->head], dma, 0);
 
-		skb_put(skb, le16_to_cpu(rx_desc->pkt_len));
-		mwl8k_remove_dma_header(skb);
+		rxq->head++;
+		if (rxq->head == MWL8K_RX_DESCS)
+			rxq->head = 0;
+
+		rxq->rxd_count--;
 
-		wh = (struct ieee80211_hdr *)skb->data;
+		skb_put(skb, pkt_len);
+		mwl8k_remove_dma_header(skb);
 
 		/*
-		 * Check for pending join operation. save a copy of
-		 * the beacon and schedule a tasklet to send finalize
-		 * join command to the firmware.
+		 * Check for a pending join operation.  Save a
+		 * copy of the beacon and schedule a tasklet to
+		 * send a FINALIZE_JOIN command to the firmware.
 		 */
-		if (mwl8k_capture_bssid(priv, wh))
-			mwl8k_save_beacon(priv, skb);
-
-		memset(&status, 0, sizeof(status));
-		status.mactime = 0;
-		status.signal = -rx_desc->rssi;
-		status.noise = -rx_desc->noise_level;
-		status.qual = rx_desc->link_quality;
-		status.antenna = 1;
-		status.rate_idx = 1;
-		status.flag = 0;
-		status.band = IEEE80211_BAND_2GHZ;
-		status.freq = ieee80211_channel_to_frequency(rx_desc->channel);
+		if (mwl8k_capture_bssid(priv, (void *)skb->data))
+			mwl8k_save_beacon(hw, skb);
+
 		memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
 		ieee80211_rx_irqsafe(hw, skb);
 
@@ -965,24 +1136,10 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit)
  * Packet transmission.
  */
 
-/* Transmit queue assignment.  */
-enum {
-	MWL8K_WME_AC_BK	= 0,		/* background access */
-	MWL8K_WME_AC_BE	= 1,		/* best effort access */
-	MWL8K_WME_AC_VI	= 2,		/* video access */
-	MWL8K_WME_AC_VO	= 3,		/* voice access */
-};
-
 /* Transmit packet ACK policy */
 #define MWL8K_TXD_ACK_POLICY_NORMAL		0
 #define MWL8K_TXD_ACK_POLICY_BLOCKACK		3
 
-#define GET_TXQ(_ac) (\
-		((_ac) == WME_AC_VO) ? MWL8K_WME_AC_VO : \
-		((_ac) == WME_AC_VI) ? MWL8K_WME_AC_VI : \
-		((_ac) == WME_AC_BK) ? MWL8K_WME_AC_BK : \
-		MWL8K_WME_AC_BE)
-
 #define MWL8K_TXD_STATUS_OK			0x00000001
 #define MWL8K_TXD_STATUS_OK_RETRY		0x00000002
 #define MWL8K_TXD_STATUS_OK_MORE_RETRY		0x00000004
@@ -997,7 +1154,7 @@ struct mwl8k_tx_desc {
 	__le32 pkt_phys_addr;
 	__le16 pkt_len;
 	__u8 dest_MAC_addr[ETH_ALEN];
-	__le32 next_tx_desc_phys_addr;
+	__le32 next_txd_phys_addr;
 	__le32 reserved;
 	__le16 rate_info;
 	__u8 peer_id;
@@ -1013,44 +1170,40 @@ static int mwl8k_txq_init(struct ieee80211_hw *hw, int index)
 	int size;
 	int i;
 
-	memset(&txq->tx_stats, 0, sizeof(struct ieee80211_tx_queue_stats));
-	txq->tx_stats.limit = MWL8K_TX_DESCS;
-	txq->tx_head = 0;
-	txq->tx_tail = 0;
+	memset(&txq->stats, 0, sizeof(struct ieee80211_tx_queue_stats));
+	txq->stats.limit = MWL8K_TX_DESCS;
+	txq->head = 0;
+	txq->tail = 0;
 
 	size = MWL8K_TX_DESCS * sizeof(struct mwl8k_tx_desc);
 
-	txq->tx_desc_area =
-		pci_alloc_consistent(priv->pdev, size, &txq->tx_desc_dma);
-	if (txq->tx_desc_area == NULL) {
+	txq->txd = pci_alloc_consistent(priv->pdev, size, &txq->txd_dma);
+	if (txq->txd == NULL) {
 		printk(KERN_ERR "%s: failed to alloc TX descriptors\n",
-		       priv->name);
+		       wiphy_name(hw->wiphy));
 		return -ENOMEM;
 	}
-	memset(txq->tx_desc_area, 0, size);
+	memset(txq->txd, 0, size);
 
-	txq->tx_skb = kmalloc(MWL8K_TX_DESCS * sizeof(*txq->tx_skb),
-								GFP_KERNEL);
-	if (txq->tx_skb == NULL) {
+	txq->skb = kmalloc(MWL8K_TX_DESCS * sizeof(*txq->skb), GFP_KERNEL);
+	if (txq->skb == NULL) {
 		printk(KERN_ERR "%s: failed to alloc TX skbuff list\n",
-		       priv->name);
-		pci_free_consistent(priv->pdev, size,
-				    txq->tx_desc_area, txq->tx_desc_dma);
+		       wiphy_name(hw->wiphy));
+		pci_free_consistent(priv->pdev, size, txq->txd, txq->txd_dma);
 		return -ENOMEM;
 	}
-	memset(txq->tx_skb, 0, MWL8K_TX_DESCS * sizeof(*txq->tx_skb));
+	memset(txq->skb, 0, MWL8K_TX_DESCS * sizeof(*txq->skb));
 
 	for (i = 0; i < MWL8K_TX_DESCS; i++) {
 		struct mwl8k_tx_desc *tx_desc;
 		int nexti;
 
-		tx_desc = txq->tx_desc_area + i;
+		tx_desc = txq->txd + i;
 		nexti = (i + 1) % MWL8K_TX_DESCS;
 
 		tx_desc->status = 0;
-		tx_desc->next_tx_desc_phys_addr =
-			cpu_to_le32(txq->tx_desc_dma +
-						nexti * sizeof(*tx_desc));
+		tx_desc->next_txd_phys_addr =
+			cpu_to_le32(txq->txd_dma + nexti * sizeof(*tx_desc));
 	}
 
 	return 0;
@@ -1065,11 +1218,6 @@ static inline void mwl8k_tx_start(struct mwl8k_priv *priv)
 	ioread32(priv->regs + MWL8K_HIU_INT_CODE);
 }
 
-static inline int mwl8k_txq_busy(struct mwl8k_priv *priv)
-{
-	return priv->pending_tx_pkts;
-}
-
 struct mwl8k_txq_info {
 	u32 fw_owned;
 	u32 drv_owned;
@@ -1089,14 +1237,13 @@ static int mwl8k_scan_tx_ring(struct mwl8k_priv *priv,
 
 	memset(txinfo, 0, MWL8K_TX_QUEUES * sizeof(struct mwl8k_txq_info));
 
-	spin_lock_bh(&priv->tx_lock);
 	for (count = 0; count < MWL8K_TX_QUEUES; count++) {
 		txq = priv->txq + count;
-		txinfo[count].len = txq->tx_stats.len;
-		txinfo[count].head = txq->tx_head;
-		txinfo[count].tail = txq->tx_tail;
+		txinfo[count].len = txq->stats.len;
+		txinfo[count].head = txq->head;
+		txinfo[count].tail = txq->tail;
 		for (desc = 0; desc < MWL8K_TX_DESCS; desc++) {
-			tx_desc = txq->tx_desc_area + desc;
+			tx_desc = txq->txd + desc;
 			status = le32_to_cpu(tx_desc->status);
 
 			if (status & MWL8K_TXD_STATUS_FW_OWNED)
@@ -1108,30 +1255,26 @@ static int mwl8k_scan_tx_ring(struct mwl8k_priv *priv,
 				txinfo[count].unused++;
 		}
 	}
-	spin_unlock_bh(&priv->tx_lock);
 
 	return ndescs;
 }
 
 /*
- * Must be called with hw->fw_mutex held and tx queues stopped.
+ * Must be called with priv->fw_mutex held and tx queues stopped.
  */
 static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw)
 {
 	struct mwl8k_priv *priv = hw->priv;
-	DECLARE_COMPLETION_ONSTACK(cmd_wait);
+	DECLARE_COMPLETION_ONSTACK(tx_wait);
 	u32 count;
 	unsigned long timeout;
 
 	might_sleep();
 
 	spin_lock_bh(&priv->tx_lock);
-	count = mwl8k_txq_busy(priv);
-	if (count) {
-		priv->tx_wait = &cmd_wait;
-		if (priv->radio_on)
-			mwl8k_tx_start(priv);
-	}
+	count = priv->pending_tx_pkts;
+	if (count)
+		priv->tx_wait = &tx_wait;
 	spin_unlock_bh(&priv->tx_lock);
 
 	if (count) {
@@ -1139,23 +1282,23 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw)
 		int index;
 		int newcount;
 
-		timeout = wait_for_completion_timeout(&cmd_wait,
+		timeout = wait_for_completion_timeout(&tx_wait,
 					msecs_to_jiffies(5000));
 		if (timeout)
 			return 0;
 
 		spin_lock_bh(&priv->tx_lock);
 		priv->tx_wait = NULL;
-		newcount = mwl8k_txq_busy(priv);
+		newcount = priv->pending_tx_pkts;
+		mwl8k_scan_tx_ring(priv, txinfo);
 		spin_unlock_bh(&priv->tx_lock);
 
 		printk(KERN_ERR "%s(%u) TIMEDOUT:5000ms Pend:%u-->%u\n",
 		       __func__, __LINE__, count, newcount);
 
-		mwl8k_scan_tx_ring(priv, txinfo);
 		for (index = 0; index < MWL8K_TX_QUEUES; index++)
-			printk(KERN_ERR
-				"TXQ:%u L:%u H:%u T:%u FW:%u DRV:%u U:%u\n",
+			printk(KERN_ERR "TXQ:%u L:%u H:%u T:%u FW:%u "
+			       "DRV:%u U:%u\n",
 					index,
 					txinfo[index].len,
 					txinfo[index].head,
@@ -1181,7 +1324,7 @@ static void mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int force)
 	struct mwl8k_tx_queue *txq = priv->txq + index;
 	int wake = 0;
 
-	while (txq->tx_stats.len > 0) {
+	while (txq->stats.len > 0) {
 		int tx;
 		struct mwl8k_tx_desc *tx_desc;
 		unsigned long addr;
@@ -1190,8 +1333,8 @@ static void mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int force)
 		struct ieee80211_tx_info *info;
 		u32 status;
 
-		tx = txq->tx_head;
-		tx_desc = txq->tx_desc_area + tx;
+		tx = txq->head;
+		tx_desc = txq->txd + tx;
 
 		status = le32_to_cpu(tx_desc->status);
 
@@ -1202,15 +1345,15 @@ static void mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int force)
 				~cpu_to_le32(MWL8K_TXD_STATUS_FW_OWNED);
 		}
 
-		txq->tx_head = (tx + 1) % MWL8K_TX_DESCS;
-		BUG_ON(txq->tx_stats.len == 0);
-		txq->tx_stats.len--;
+		txq->head = (tx + 1) % MWL8K_TX_DESCS;
+		BUG_ON(txq->stats.len == 0);
+		txq->stats.len--;
 		priv->pending_tx_pkts--;
 
 		addr = le32_to_cpu(tx_desc->pkt_phys_addr);
 		size = le16_to_cpu(tx_desc->pkt_len);
-		skb = txq->tx_skb[tx];
-		txq->tx_skb[tx] = NULL;
+		skb = txq->skb[tx];
+		txq->skb[tx] = NULL;
 
 		BUG_ON(skb == NULL);
 		pci_unmap_single(priv->pdev, addr, size, PCI_DMA_TODEVICE);
@@ -1243,13 +1386,13 @@ static void mwl8k_txq_deinit(struct ieee80211_hw *hw, int index)
 
 	mwl8k_txq_reclaim(hw, index, 1);
 
-	kfree(txq->tx_skb);
-	txq->tx_skb = NULL;
+	kfree(txq->skb);
+	txq->skb = NULL;
 
 	pci_free_consistent(priv->pdev,
 			    MWL8K_TX_DESCS * sizeof(struct mwl8k_tx_desc),
-			    txq->tx_desc_area, txq->tx_desc_dma);
-	txq->tx_desc_area = NULL;
+			    txq->txd, txq->txd_dma);
+	txq->txd = NULL;
 }
 
 static int
@@ -1317,7 +1460,7 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb)
 
 	if (pci_dma_mapping_error(priv->pdev, dma)) {
 		printk(KERN_DEBUG "%s: failed to dma map skb, "
-			"dropping TX frame.\n", priv->name);
+		       "dropping TX frame.\n", wiphy_name(hw->wiphy));
 		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
@@ -1326,10 +1469,10 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb)
 
 	txq = priv->txq + index;
 
-	BUG_ON(txq->tx_skb[txq->tx_tail] != NULL);
-	txq->tx_skb[txq->tx_tail] = skb;
+	BUG_ON(txq->skb[txq->tail] != NULL);
+	txq->skb[txq->tail] = skb;
 
-	tx = txq->tx_desc_area + txq->tx_tail;
+	tx = txq->txd + txq->tail;
 	tx->data_rate = txdatarate;
 	tx->tx_priority = index;
 	tx->qos_control = cpu_to_le16(qos);
@@ -1340,15 +1483,15 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb)
 	wmb();
 	tx->status = cpu_to_le32(MWL8K_TXD_STATUS_FW_OWNED | txstatus);
 
-	txq->tx_stats.count++;
-	txq->tx_stats.len++;
+	txq->stats.count++;
+	txq->stats.len++;
 	priv->pending_tx_pkts++;
 
-	txq->tx_tail++;
-	if (txq->tx_tail == MWL8K_TX_DESCS)
-		txq->tx_tail = 0;
+	txq->tail++;
+	if (txq->tail == MWL8K_TX_DESCS)
+		txq->tail = 0;
 
-	if (txq->tx_head == txq->tx_tail)
+	if (txq->head == txq->tail)
 		ieee80211_stop_queue(hw, index);
 
 	mwl8k_tx_start(priv);
@@ -1431,7 +1574,7 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd)
 	unsigned long timeout = 0;
 	u8 buf[32];
 
-	cmd->result = 0xFFFF;
+	cmd->result = 0xffff;
 	dma_size = le16_to_cpu(cmd->length);
 	dma_addr = pci_map_single(priv->pdev, cmd, dma_size,
 				  PCI_DMA_BIDIRECTIONAL);
@@ -1464,7 +1607,7 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd)
 
 	if (!timeout) {
 		printk(KERN_ERR "%s: Command %s timeout after %u ms\n",
-		       priv->name,
+		       wiphy_name(hw->wiphy),
 		       mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
 		       MWL8K_CMD_TIMEOUT_MS);
 		rc = -ETIMEDOUT;
@@ -1472,7 +1615,7 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd)
 		rc = cmd->result ? -EINVAL : 0;
 		if (rc)
 			printk(KERN_ERR "%s: Command %s error 0x%x\n",
-			       priv->name,
+			       wiphy_name(hw->wiphy),
 			       mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
 			       le16_to_cpu(cmd->result));
 	}
@@ -1481,9 +1624,9 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd)
 }
 
 /*
- * GET_HW_SPEC.
+ * CMD_GET_HW_SPEC (STA version).
  */
-struct mwl8k_cmd_get_hw_spec {
+struct mwl8k_cmd_get_hw_spec_sta {
 	struct mwl8k_cmd_pkt header;
 	__u8 hw_rev;
 	__u8 host_interface;
@@ -1499,13 +1642,13 @@ struct mwl8k_cmd_get_hw_spec {
 	__le32 tx_queue_ptrs[MWL8K_TX_QUEUES];
 	__le32 caps2;
 	__le32 num_tx_desc_per_queue;
-	__le32 total_rx_desc;
+	__le32 total_rxd;
 } __attribute__((packed));
 
-static int mwl8k_cmd_get_hw_spec(struct ieee80211_hw *hw)
+static int mwl8k_cmd_get_hw_spec_sta(struct ieee80211_hw *hw)
 {
 	struct mwl8k_priv *priv = hw->priv;
-	struct mwl8k_cmd_get_hw_spec *cmd;
+	struct mwl8k_cmd_get_hw_spec_sta *cmd;
 	int rc;
 	int i;
 
@@ -1518,12 +1661,12 @@ static int mwl8k_cmd_get_hw_spec(struct ieee80211_hw *hw)
 
 	memset(cmd->perm_addr, 0xff, sizeof(cmd->perm_addr));
 	cmd->ps_cookie = cpu_to_le32(priv->cookie_dma);
-	cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rx_desc_dma);
+	cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rxd_dma);
 	cmd->num_tx_queues = cpu_to_le32(MWL8K_TX_QUEUES);
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
-		cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].tx_desc_dma);
+		cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].txd_dma);
 	cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS);
-	cmd->total_rx_desc = cpu_to_le32(MWL8K_RX_DESCS);
+	cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 
@@ -1539,6 +1682,129 @@ static int mwl8k_cmd_get_hw_spec(struct ieee80211_hw *hw)
 }
 
 /*
+ * CMD_GET_HW_SPEC (AP version).
+ */
+struct mwl8k_cmd_get_hw_spec_ap {
+	struct mwl8k_cmd_pkt header;
+	__u8 hw_rev;
+	__u8 host_interface;
+	__le16 num_wcb;
+	__le16 num_mcaddrs;
+	__u8 perm_addr[ETH_ALEN];
+	__le16 region_code;
+	__le16 num_antenna;
+	__le32 fw_rev;
+	__le32 wcbbase0;
+	__le32 rxwrptr;
+	__le32 rxrdptr;
+	__le32 ps_cookie;
+	__le32 wcbbase1;
+	__le32 wcbbase2;
+	__le32 wcbbase3;
+} __attribute__((packed));
+
+static int mwl8k_cmd_get_hw_spec_ap(struct ieee80211_hw *hw)
+{
+	struct mwl8k_priv *priv = hw->priv;
+	struct mwl8k_cmd_get_hw_spec_ap *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_GET_HW_SPEC);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+
+	memset(cmd->perm_addr, 0xff, sizeof(cmd->perm_addr));
+	cmd->ps_cookie = cpu_to_le32(priv->cookie_dma);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+
+	if (!rc) {
+		int off;
+
+		SET_IEEE80211_PERM_ADDR(hw, cmd->perm_addr);
+		priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs);
+		priv->fw_rev = le32_to_cpu(cmd->fw_rev);
+		priv->hw_rev = cmd->hw_rev;
+
+		off = le32_to_cpu(cmd->wcbbase0) & 0xffff;
+		iowrite32(cpu_to_le32(priv->txq[0].txd_dma), priv->sram + off);
+
+		off = le32_to_cpu(cmd->rxwrptr) & 0xffff;
+		iowrite32(cpu_to_le32(priv->rxq[0].rxd_dma), priv->sram + off);
+
+		off = le32_to_cpu(cmd->rxrdptr) & 0xffff;
+		iowrite32(cpu_to_le32(priv->rxq[0].rxd_dma), priv->sram + off);
+
+		off = le32_to_cpu(cmd->wcbbase1) & 0xffff;
+		iowrite32(cpu_to_le32(priv->txq[1].txd_dma), priv->sram + off);
+
+		off = le32_to_cpu(cmd->wcbbase2) & 0xffff;
+		iowrite32(cpu_to_le32(priv->txq[2].txd_dma), priv->sram + off);
+
+		off = le32_to_cpu(cmd->wcbbase3) & 0xffff;
+		iowrite32(cpu_to_le32(priv->txq[3].txd_dma), priv->sram + off);
+	}
+
+	kfree(cmd);
+	return rc;
+}
+
+/*
+ * CMD_SET_HW_SPEC.
+ */
+struct mwl8k_cmd_set_hw_spec {
+	struct mwl8k_cmd_pkt header;
+	__u8 hw_rev;
+	__u8 host_interface;
+	__le16 num_mcaddrs;
+	__u8 perm_addr[ETH_ALEN];
+	__le16 region_code;
+	__le32 fw_rev;
+	__le32 ps_cookie;
+	__le32 caps;
+	__le32 rx_queue_ptr;
+	__le32 num_tx_queues;
+	__le32 tx_queue_ptrs[MWL8K_TX_QUEUES];
+	__le32 flags;
+	__le32 num_tx_desc_per_queue;
+	__le32 total_rxd;
+} __attribute__((packed));
+
+#define MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT	0x00000080
+
+static int mwl8k_cmd_set_hw_spec(struct ieee80211_hw *hw)
+{
+	struct mwl8k_priv *priv = hw->priv;
+	struct mwl8k_cmd_set_hw_spec *cmd;
+	int rc;
+	int i;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_HW_SPEC);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+
+	cmd->ps_cookie = cpu_to_le32(priv->cookie_dma);
+	cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rxd_dma);
+	cmd->num_tx_queues = cpu_to_le32(MWL8K_TX_QUEUES);
+	for (i = 0; i < MWL8K_TX_QUEUES; i++)
+		cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].txd_dma);
+	cmd->flags = cpu_to_le32(MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT);
+	cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS);
+	cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
+/*
  * CMD_MAC_MULTICAST_ADR.
  */
 struct mwl8k_cmd_mac_multicast_adr {
@@ -1548,19 +1814,23 @@ struct mwl8k_cmd_mac_multicast_adr {
 	__u8 addr[0][ETH_ALEN];
 };
 
-#define MWL8K_ENABLE_RX_MULTICAST 0x000F
+#define MWL8K_ENABLE_RX_DIRECTED	0x0001
+#define MWL8K_ENABLE_RX_MULTICAST	0x0002
+#define MWL8K_ENABLE_RX_ALL_MULTICAST	0x0004
+#define MWL8K_ENABLE_RX_BROADCAST	0x0008
 
 static struct mwl8k_cmd_pkt *
-__mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw,
+__mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw, int allmulti,
 			      int mc_count, struct dev_addr_list *mclist)
 {
 	struct mwl8k_priv *priv = hw->priv;
 	struct mwl8k_cmd_mac_multicast_adr *cmd;
 	int size;
-	int i;
 
-	if (mc_count > priv->num_mcaddrs)
-		mc_count = priv->num_mcaddrs;
+	if (allmulti || mc_count > priv->num_mcaddrs) {
+		allmulti = 1;
+		mc_count = 0;
+	}
 
 	size = sizeof(*cmd) + mc_count * ETH_ALEN;
 
@@ -1570,16 +1840,24 @@ __mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw,
 
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_MAC_MULTICAST_ADR);
 	cmd->header.length = cpu_to_le16(size);
-	cmd->action = cpu_to_le16(MWL8K_ENABLE_RX_MULTICAST);
-	cmd->numaddr = cpu_to_le16(mc_count);
-
-	for (i = 0; i < mc_count && mclist; i++) {
-		if (mclist->da_addrlen != ETH_ALEN) {
-			kfree(cmd);
-			return NULL;
+	cmd->action = cpu_to_le16(MWL8K_ENABLE_RX_DIRECTED |
+				  MWL8K_ENABLE_RX_BROADCAST);
+
+	if (allmulti) {
+		cmd->action |= cpu_to_le16(MWL8K_ENABLE_RX_ALL_MULTICAST);
+	} else if (mc_count) {
+		int i;
+
+		cmd->action |= cpu_to_le16(MWL8K_ENABLE_RX_MULTICAST);
+		cmd->numaddr = cpu_to_le16(mc_count);
+		for (i = 0; i < mc_count && mclist; i++) {
+			if (mclist->da_addrlen != ETH_ALEN) {
+				kfree(cmd);
+				return NULL;
+			}
+			memcpy(cmd->addr[i], mclist->da_addr, ETH_ALEN);
+			mclist = mclist->next;
 		}
-		memcpy(cmd->addr[i], mclist->da_addr, ETH_ALEN);
-		mclist = mclist->next;
 	}
 
 	return &cmd->header;
@@ -1590,7 +1868,6 @@ __mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw,
  */
 struct mwl8k_cmd_802_11_get_stat {
 	struct mwl8k_cmd_pkt header;
-	__le16 action;
 	__le32 stats[64];
 } __attribute__((packed));
 
@@ -1611,7 +1888,6 @@ static int mwl8k_cmd_802_11_get_stat(struct ieee80211_hw *hw,
 
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_GET_STAT);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	cmd->action = cpu_to_le16(MWL8K_CMD_GET);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	if (!rc) {
@@ -1727,6 +2003,39 @@ static int mwl8k_cmd_802_11_rf_tx_power(struct ieee80211_hw *hw, int dBm)
 }
 
 /*
+ * CMD_RF_ANTENNA.
+ */
+struct mwl8k_cmd_rf_antenna {
+	struct mwl8k_cmd_pkt header;
+	__le16 antenna;
+	__le16 mode;
+} __attribute__((packed));
+
+#define MWL8K_RF_ANTENNA_RX		1
+#define MWL8K_RF_ANTENNA_TX		2
+
+static int
+mwl8k_cmd_rf_antenna(struct ieee80211_hw *hw, int antenna, int mask)
+{
+	struct mwl8k_cmd_rf_antenna *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_RF_ANTENNA);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	cmd->antenna = cpu_to_le16(antenna);
+	cmd->mode = cpu_to_le16(mask);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
+/*
  * CMD_SET_PRE_SCAN.
  */
 struct mwl8k_cmd_set_pre_scan {
@@ -1904,6 +2213,46 @@ static int mwl8k_enable_sniffer(struct ieee80211_hw *hw, bool enable)
 }
 
 /*
+ * CMD_SET_MAC_ADDR.
+ */
+struct mwl8k_cmd_set_mac_addr {
+	struct mwl8k_cmd_pkt header;
+	union {
+		struct {
+			__le16 mac_type;
+			__u8 mac_addr[ETH_ALEN];
+		} mbss;
+		__u8 mac_addr[ETH_ALEN];
+	};
+} __attribute__((packed));
+
+static int mwl8k_set_mac_addr(struct ieee80211_hw *hw, u8 *mac)
+{
+	struct mwl8k_priv *priv = hw->priv;
+	struct mwl8k_cmd_set_mac_addr *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_MAC_ADDR);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	if (priv->ap_fw) {
+		cmd->mbss.mac_type = 0;
+		memcpy(cmd->mbss.mac_addr, mac, ETH_ALEN);
+	} else {
+		memcpy(cmd->mac_addr, mac, ETH_ALEN);
+	}
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
+
+/*
  * CMD_SET_RATEADAPT_MODE.
  */
 struct mwl8k_cmd_set_rate_adapt_mode {
@@ -2005,17 +2354,34 @@ struct mwl8k_cmd_set_edca_params {
 	/* TX opportunity in units of 32 us */
 	__le16 txop;
 
-	/* Log exponent of max contention period: 0...15*/
-	__u8 log_cw_max;
+	union {
+		struct {
+			/* Log exponent of max contention period: 0...15 */
+			__le32 log_cw_max;
+
+			/* Log exponent of min contention period: 0...15 */
+			__le32 log_cw_min;
+
+			/* Adaptive interframe spacing in units of 32us */
+			__u8 aifs;
+
+			/* TX queue to configure */
+			__u8 txq;
+		} ap;
+		struct {
+			/* Log exponent of max contention period: 0...15 */
+			__u8 log_cw_max;
 
-	/* Log exponent of min contention period: 0...15 */
-	__u8 log_cw_min;
+			/* Log exponent of min contention period: 0...15 */
+			__u8 log_cw_min;
 
-	/* Adaptive interframe spacing in units of 32us */
-	__u8 aifs;
+			/* Adaptive interframe spacing in units of 32us */
+			__u8 aifs;
 
-	/* TX queue to configure */
-	__u8 txq;
+			/* TX queue to configure */
+			__u8 txq;
+		} sta;
+	};
 } __attribute__((packed));
 
 #define MWL8K_SET_EDCA_CW	0x01
@@ -2031,6 +2397,7 @@ mwl8k_set_edca_params(struct ieee80211_hw *hw, __u8 qnum,
 		__u16 cw_min, __u16 cw_max,
 		__u8 aifs, __u16 txop)
 {
+	struct mwl8k_priv *priv = hw->priv;
 	struct mwl8k_cmd_set_edca_params *cmd;
 	int rc;
 
@@ -2038,14 +2405,27 @@ mwl8k_set_edca_params(struct ieee80211_hw *hw, __u8 qnum,
 	if (cmd == NULL)
 		return -ENOMEM;
 
+	/*
+	 * Queues 0 (BE) and 1 (BK) are swapped in hardware for
+	 * this call.
+	 */
+	qnum ^= !(qnum >> 1);
+
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_EDCA_PARAMS);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
 	cmd->action = cpu_to_le16(MWL8K_SET_EDCA_ALL);
 	cmd->txop = cpu_to_le16(txop);
-	cmd->log_cw_max = (u8)ilog2(cw_max + 1);
-	cmd->log_cw_min = (u8)ilog2(cw_min + 1);
-	cmd->aifs = aifs;
-	cmd->txq = qnum;
+	if (priv->ap_fw) {
+		cmd->ap.log_cw_max = cpu_to_le32(ilog2(cw_max + 1));
+		cmd->ap.log_cw_min = cpu_to_le32(ilog2(cw_min + 1));
+		cmd->ap.aifs = aifs;
+		cmd->ap.txq = qnum;
+	} else {
+		cmd->sta.log_cw_max = (u8)ilog2(cw_max + 1);
+		cmd->sta.log_cw_min = (u8)ilog2(cw_min + 1);
+		cmd->sta.aifs = aifs;
+		cmd->sta.txq = qnum;
+	}
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2093,8 +2473,8 @@ static int mwl8k_finalize_join(struct ieee80211_hw *hw, void *frame,
 	/* XXX TBD Might just have to abort and return an error */
 	if (payload_len > MWL8K_FJ_BEACON_MAXLEN)
 		printk(KERN_ERR "%s(): WARNING: Incomplete beacon "
-			"sent to firmware. Sz=%u MAX=%u\n", __func__,
-			payload_len, MWL8K_FJ_BEACON_MAXLEN);
+		       "sent to firmware. Sz=%u MAX=%u\n", __func__,
+		       payload_len, MWL8K_FJ_BEACON_MAXLEN);
 
 	if (payload_len > MWL8K_FJ_BEACON_MAXLEN)
 		payload_len = MWL8K_FJ_BEACON_MAXLEN;
@@ -2341,9 +2721,10 @@ static int mwl8k_cmd_use_fixed_rate(struct ieee80211_hw *hw,
 	cmd->rate_type = cpu_to_le32(rate_type);
 
 	if (rate_table != NULL) {
-		/* Copy over each field manually so
-		* that bitflipping can be done
-		*/
+		/*
+		 * Copy over each field manually so that endian
+		 * conversion can be done.
+		 */
 		cmd->rate_table.allow_rate_drop =
 				cpu_to_le32(rate_table->allow_rate_drop);
 		cmd->rate_table.num_rates =
@@ -2399,7 +2780,7 @@ static irqreturn_t mwl8k_interrupt(int irq, void *dev_id)
 
 	if (status & MWL8K_A2H_INT_QUEUE_EMPTY) {
 		if (!mutex_is_locked(&priv->fw_mutex) &&
-		    priv->radio_on && mwl8k_txq_busy(priv))
+		    priv->radio_on && priv->pending_tx_pkts)
 			mwl8k_tx_start(priv);
 	}
 
@@ -2418,7 +2799,7 @@ static int mwl8k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 
 	if (priv->current_channel == NULL) {
 		printk(KERN_DEBUG "%s: dropped TX frame since radio "
-		       "disabled\n", priv->name);
+		       "disabled\n", wiphy_name(hw->wiphy));
 		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
@@ -2437,7 +2818,7 @@ static int mwl8k_start(struct ieee80211_hw *hw)
 			 IRQF_SHARED, MWL8K_NAME, hw);
 	if (rc) {
 		printk(KERN_ERR "%s: failed to register IRQ handler\n",
-		       priv->name);
+		       wiphy_name(hw->wiphy));
 		return -EIO;
 	}
 
@@ -2451,12 +2832,17 @@ static int mwl8k_start(struct ieee80211_hw *hw)
 	if (!rc) {
 		rc = mwl8k_cmd_802_11_radio_enable(hw);
 
-		if (!rc)
-			rc = mwl8k_cmd_set_pre_scan(hw);
+		if (!priv->ap_fw) {
+			if (!rc)
+				rc = mwl8k_enable_sniffer(hw, 0);
 
-		if (!rc)
-			rc = mwl8k_cmd_set_post_scan(hw,
-					"\x00\x00\x00\x00\x00\x00");
+			if (!rc)
+				rc = mwl8k_cmd_set_pre_scan(hw);
+
+			if (!rc)
+				rc = mwl8k_cmd_set_post_scan(hw,
+						"\x00\x00\x00\x00\x00\x00");
+		}
 
 		if (!rc)
 			rc = mwl8k_cmd_setrateadaptmode(hw, 0);
@@ -2464,9 +2850,6 @@ static int mwl8k_start(struct ieee80211_hw *hw)
 		if (!rc)
 			rc = mwl8k_set_wmm(hw, 0);
 
-		if (!rc)
-			rc = mwl8k_enable_sniffer(hw, 0);
-
 		mwl8k_fw_unlock(hw);
 	}
 
@@ -2500,9 +2883,6 @@ static void mwl8k_stop(struct ieee80211_hw *hw)
 	/* Stop tx reclaim tasklet */
 	tasklet_disable(&priv->tx_reclaim_task);
 
-	/* Stop config thread */
-	flush_workqueue(priv->config_wq);
-
 	/* Return all skbs to mac80211 */
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
 		mwl8k_txq_reclaim(hw, i, 1);
@@ -2526,11 +2906,24 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	if (conf->type != NL80211_IFTYPE_STATION)
 		return -EINVAL;
 
+	/*
+	 * Reject interface creation if sniffer mode is active, as
+	 * STA operation is mutually exclusive with hardware sniffer
+	 * mode.
+	 */
+	if (priv->sniffer_enabled) {
+		printk(KERN_INFO "%s: unable to create STA "
+		       "interface due to sniffer mode being enabled\n",
+		       wiphy_name(hw->wiphy));
+		return -EINVAL;
+	}
+
 	/* Clean out driver private area */
 	mwl8k_vif = MWL8K_VIF(conf->vif);
 	memset(mwl8k_vif, 0, sizeof(*mwl8k_vif));
 
-	/* Save the mac address */
+	/* Set and save the mac address */
+	mwl8k_set_mac_addr(hw, conf->mac_addr);
 	memcpy(mwl8k_vif->mac_addr, conf->mac_addr, ETH_ALEN);
 
 	/* Back pointer to parent config block */
@@ -2558,6 +2951,8 @@ static void mwl8k_remove_interface(struct ieee80211_hw *hw,
 	if (priv->vif == NULL)
 		return;
 
+	mwl8k_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
+
 	priv->vif = NULL;
 }
 
@@ -2593,8 +2988,13 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
 	if (rc)
 		goto out;
 
-	if (mwl8k_cmd_mimo_config(hw, 0x7, 0x7))
-		rc = -EINVAL;
+	if (priv->ap_fw) {
+		rc = mwl8k_cmd_rf_antenna(hw, MWL8K_RF_ANTENNA_RX, 0x7);
+		if (!rc)
+			rc = mwl8k_cmd_rf_antenna(hw, MWL8K_RF_ANTENNA_TX, 0x7);
+	} else {
+		rc = mwl8k_cmd_mimo_config(hw, 0x7, 0x7);
+	}
 
 out:
 	mwl8k_fw_unlock(hw);
@@ -2681,32 +3081,108 @@ static u64 mwl8k_prepare_multicast(struct ieee80211_hw *hw,
 {
 	struct mwl8k_cmd_pkt *cmd;
 
-	cmd = __mwl8k_cmd_mac_multicast_adr(hw, mc_count, mclist);
+	/*
+	 * Synthesize and return a command packet that programs the
+	 * hardware multicast address filter.  At this point we don't
+	 * know whether FIF_ALLMULTI is being requested, but if it is,
+	 * we'll end up throwing this packet away and creating a new
+	 * one in mwl8k_configure_filter().
+	 */
+	cmd = __mwl8k_cmd_mac_multicast_adr(hw, 0, mc_count, mclist);
 
 	return (unsigned long)cmd;
 }
 
+static int
+mwl8k_configure_filter_sniffer(struct ieee80211_hw *hw,
+			       unsigned int changed_flags,
+			       unsigned int *total_flags)
+{
+	struct mwl8k_priv *priv = hw->priv;
+
+	/*
+	 * Hardware sniffer mode is mutually exclusive with STA
+	 * operation, so refuse to enable sniffer mode if a STA
+	 * interface is active.
+	 */
+	if (priv->vif != NULL) {
+		if (net_ratelimit())
+			printk(KERN_INFO "%s: not enabling sniffer "
+			       "mode because STA interface is active\n",
+			       wiphy_name(hw->wiphy));
+		return 0;
+	}
+
+	if (!priv->sniffer_enabled) {
+		if (mwl8k_enable_sniffer(hw, 1))
+			return 0;
+		priv->sniffer_enabled = true;
+	}
+
+	*total_flags &=	FIF_PROMISC_IN_BSS | FIF_ALLMULTI |
+			FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL |
+			FIF_OTHER_BSS;
+
+	return 1;
+}
+
 static void mwl8k_configure_filter(struct ieee80211_hw *hw,
 				   unsigned int changed_flags,
 				   unsigned int *total_flags,
 				   u64 multicast)
 {
 	struct mwl8k_priv *priv = hw->priv;
-	struct mwl8k_cmd_pkt *multicast_adr_cmd;
+	struct mwl8k_cmd_pkt *cmd = (void *)(unsigned long)multicast;
+
+	/*
+	 * AP firmware doesn't allow fine-grained control over
+	 * the receive filter.
+	 */
+	if (priv->ap_fw) {
+		*total_flags &= FIF_ALLMULTI | FIF_BCN_PRBRESP_PROMISC;
+		kfree(cmd);
+		return;
+	}
+
+	/*
+	 * Enable hardware sniffer mode if FIF_CONTROL or
+	 * FIF_OTHER_BSS is requested.
+	 */
+	if (*total_flags & (FIF_CONTROL | FIF_OTHER_BSS) &&
+	    mwl8k_configure_filter_sniffer(hw, changed_flags, total_flags)) {
+		kfree(cmd);
+		return;
+	}
 
 	/* Clear unsupported feature flags */
-	*total_flags &= FIF_BCN_PRBRESP_PROMISC;
+	*total_flags &= FIF_ALLMULTI | FIF_BCN_PRBRESP_PROMISC;
 
 	if (mwl8k_fw_lock(hw))
 		return;
 
+	if (priv->sniffer_enabled) {
+		mwl8k_enable_sniffer(hw, 0);
+		priv->sniffer_enabled = false;
+	}
+
 	if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
-		if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
+		if (*total_flags & FIF_BCN_PRBRESP_PROMISC) {
+			/*
+			 * Disable the BSS filter.
+			 */
 			mwl8k_cmd_set_pre_scan(hw);
-		else {
+		} else {
 			u8 *bssid;
 
-			bssid = "\x00\x00\x00\x00\x00\x00";
+			/*
+			 * Enable the BSS filter.
+			 *
+			 * If there is an active STA interface, use that
+			 * interface's BSSID, otherwise use a dummy one
+			 * (where the OUI part needs to be nonzero for
+			 * the BSSID to be accepted by POST_SCAN).
+			 */
+			bssid = "\x01\x00\x00\x00\x00\x00";
 			if (priv->vif != NULL)
 				bssid = MWL8K_VIF(priv->vif)->bssid;
 
@@ -2714,10 +3190,20 @@ static void mwl8k_configure_filter(struct ieee80211_hw *hw,
 		}
 	}
 
-	multicast_adr_cmd = (void *)(unsigned long)multicast;
-	if (multicast_adr_cmd != NULL) {
-		mwl8k_post_cmd(hw, multicast_adr_cmd);
-		kfree(multicast_adr_cmd);
+	/*
+	 * If FIF_ALLMULTI is being requested, throw away the command
+	 * packet that ->prepare_multicast() built and replace it with
+	 * a command packet that enables reception of all multicast
+	 * packets.
+	 */
+	if (*total_flags & FIF_ALLMULTI) {
+		kfree(cmd);
+		cmd = __mwl8k_cmd_mac_multicast_adr(hw, 1, 0, NULL);
+	}
+
+	if (cmd != NULL) {
+		mwl8k_post_cmd(hw, cmd);
+		kfree(cmd);
 	}
 
 	mwl8k_fw_unlock(hw);
@@ -2762,7 +3248,7 @@ static int mwl8k_get_tx_stats(struct ieee80211_hw *hw,
 	spin_lock_bh(&priv->tx_lock);
 	for (index = 0; index < MWL8K_TX_QUEUES; index++) {
 		txq = priv->txq + index;
-		memcpy(&stats[index], &txq->tx_stats,
+		memcpy(&stats[index], &txq->stats,
 			sizeof(struct ieee80211_tx_queue_stats));
 	}
 	spin_unlock_bh(&priv->tx_lock);
@@ -2802,7 +3288,7 @@ static void mwl8k_tx_reclaim_handler(unsigned long data)
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
 		mwl8k_txq_reclaim(hw, i, 0);
 
-	if (priv->tx_wait != NULL && mwl8k_txq_busy(priv) == 0) {
+	if (priv->tx_wait != NULL && !priv->pending_tx_pkts) {
 		complete(priv->tx_wait);
 		priv->tx_wait = NULL;
 	}
@@ -2822,6 +3308,36 @@ static void mwl8k_finalize_join_worker(struct work_struct *work)
 	priv->beacon_skb = NULL;
 }
 
+enum {
+	MWL8687 = 0,
+	MWL8366,
+};
+
+static struct mwl8k_device_info mwl8k_info_tbl[] __devinitdata = {
+	{
+		.part_name	= "88w8687",
+		.helper_image	= "mwl8k/helper_8687.fw",
+		.fw_image	= "mwl8k/fmimage_8687.fw",
+		.rxd_ops	= &rxd_8687_ops,
+		.modes		= BIT(NL80211_IFTYPE_STATION),
+	},
+	{
+		.part_name	= "88w8366",
+		.helper_image	= "mwl8k/helper_8366.fw",
+		.fw_image	= "mwl8k/fmimage_8366.fw",
+		.rxd_ops	= &rxd_8366_ops,
+		.modes		= 0,
+	},
+};
+
+static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = {
+	{ PCI_VDEVICE(MARVELL, 0x2a2b), .driver_data = MWL8687, },
+	{ PCI_VDEVICE(MARVELL, 0x2a30), .driver_data = MWL8687, },
+	{ PCI_VDEVICE(MARVELL, 0x2a40), .driver_data = MWL8366, },
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, mwl8k_pci_id_table);
+
 static int __devinit mwl8k_probe(struct pci_dev *pdev,
 				 const struct pci_device_id *id)
 {
@@ -2862,17 +3378,34 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	priv = hw->priv;
 	priv->hw = hw;
 	priv->pdev = pdev;
+	priv->device_info = &mwl8k_info_tbl[id->driver_data];
+	priv->rxd_ops = priv->device_info->rxd_ops;
+	priv->sniffer_enabled = false;
 	priv->wmm_enabled = false;
 	priv->pending_tx_pkts = 0;
-	strncpy(priv->name, MWL8K_NAME, sizeof(priv->name));
 
 	SET_IEEE80211_DEV(hw, &pdev->dev);
 	pci_set_drvdata(pdev, hw);
 
+	priv->sram = pci_iomap(pdev, 0, 0x10000);
+	if (priv->sram == NULL) {
+		printk(KERN_ERR "%s: Cannot map device SRAM\n",
+		       wiphy_name(hw->wiphy));
+		goto err_iounmap;
+	}
+
+	/*
+	 * If BAR0 is a 32 bit BAR, the register BAR will be BAR1.
+	 * If BAR0 is a 64 bit BAR, the register BAR will be BAR2.
+	 */
 	priv->regs = pci_iomap(pdev, 1, 0x10000);
 	if (priv->regs == NULL) {
-		printk(KERN_ERR "%s: Cannot map device memory\n", priv->name);
-		goto err_iounmap;
+		priv->regs = pci_iomap(pdev, 2, 0x10000);
+		if (priv->regs == NULL) {
+			printk(KERN_ERR "%s: Cannot map device registers\n",
+			       wiphy_name(hw->wiphy));
+			goto err_iounmap;
+		}
 	}
 
 	memcpy(priv->channels, mwl8k_channels, sizeof(mwl8k_channels));
@@ -2897,7 +3430,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 
 	hw->queues = MWL8K_TX_QUEUES;
 
-	hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+	hw->wiphy->interface_modes = priv->device_info->modes;
 
 	/* Set rssi and noise values to dBm */
 	hw->flags |= IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM;
@@ -2916,11 +3449,6 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 			mwl8k_tx_reclaim_handler, (unsigned long)hw);
 	tasklet_disable(&priv->tx_reclaim_task);
 
-	/* Config workthread */
-	priv->config_wq = create_singlethread_workqueue("mwl8k_config");
-	if (priv->config_wq == NULL)
-		goto err_iounmap;
-
 	/* Power management cookie */
 	priv->cookie = pci_alloc_consistent(priv->pdev, 4, &priv->cookie_dma);
 	if (priv->cookie == NULL)
@@ -2934,11 +3462,12 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	mutex_init(&priv->fw_mutex);
 	priv->fw_mutex_owner = NULL;
 	priv->fw_mutex_depth = 0;
-	priv->tx_wait = NULL;
 	priv->hostcmd_wait = NULL;
 
 	spin_lock_init(&priv->tx_lock);
 
+	priv->tx_wait = NULL;
+
 	for (i = 0; i < MWL8K_TX_QUEUES; i++) {
 		rc = mwl8k_txq_init(hw, i);
 		if (rc)
@@ -2954,7 +3483,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 			 IRQF_SHARED, MWL8K_NAME, hw);
 	if (rc) {
 		printk(KERN_ERR "%s: failed to register IRQ handler\n",
-		       priv->name);
+		       wiphy_name(hw->wiphy));
 		goto err_free_queues;
 	}
 
@@ -2962,16 +3491,18 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	mwl8k_hw_reset(priv);
 
 	/* Ask userland hotplug daemon for the device firmware */
-	rc = mwl8k_request_firmware(priv, (u32)id->driver_data);
+	rc = mwl8k_request_firmware(priv);
 	if (rc) {
-		printk(KERN_ERR "%s: Firmware files not found\n", priv->name);
+		printk(KERN_ERR "%s: Firmware files not found\n",
+		       wiphy_name(hw->wiphy));
 		goto err_free_irq;
 	}
 
 	/* Load firmware into hardware */
-	rc = mwl8k_load_firmware(priv);
+	rc = mwl8k_load_firmware(hw);
 	if (rc) {
-		printk(KERN_ERR "%s: Cannot start firmware\n", priv->name);
+		printk(KERN_ERR "%s: Cannot start firmware\n",
+		       wiphy_name(hw->wiphy));
 		goto err_stop_firmware;
 	}
 
@@ -2986,16 +3517,31 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	iowrite32(MWL8K_A2H_EVENTS, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
 
 	/* Get config data, mac addrs etc */
-	rc = mwl8k_cmd_get_hw_spec(hw);
+	if (priv->ap_fw) {
+		rc = mwl8k_cmd_get_hw_spec_ap(hw);
+		if (!rc)
+			rc = mwl8k_cmd_set_hw_spec(hw);
+	} else {
+		rc = mwl8k_cmd_get_hw_spec_sta(hw);
+	}
 	if (rc) {
-		printk(KERN_ERR "%s: Cannot initialise firmware\n", priv->name);
+		printk(KERN_ERR "%s: Cannot initialise firmware\n",
+		       wiphy_name(hw->wiphy));
 		goto err_stop_firmware;
 	}
 
 	/* Turn radio off */
 	rc = mwl8k_cmd_802_11_radio_disable(hw);
 	if (rc) {
-		printk(KERN_ERR "%s: Cannot disable\n", priv->name);
+		printk(KERN_ERR "%s: Cannot disable\n", wiphy_name(hw->wiphy));
+		goto err_stop_firmware;
+	}
+
+	/* Clear MAC address */
+	rc = mwl8k_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
+	if (rc) {
+		printk(KERN_ERR "%s: Cannot clear MAC address\n",
+		       wiphy_name(hw->wiphy));
 		goto err_stop_firmware;
 	}
 
@@ -3005,13 +3551,15 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 
 	rc = ieee80211_register_hw(hw);
 	if (rc) {
-		printk(KERN_ERR "%s: Cannot register device\n", priv->name);
+		printk(KERN_ERR "%s: Cannot register device\n",
+		       wiphy_name(hw->wiphy));
 		goto err_stop_firmware;
 	}
 
-	printk(KERN_INFO "%s: 88w%u v%d, %pM, firmware version %u.%u.%u.%u\n",
-	       wiphy_name(hw->wiphy), priv->part_num, priv->hw_rev,
-	       hw->wiphy->perm_addr,
+	printk(KERN_INFO "%s: %s v%d, %pM, %s firmware %u.%u.%u.%u\n",
+	       wiphy_name(hw->wiphy), priv->device_info->part_name,
+	       priv->hw_rev, hw->wiphy->perm_addr,
+	       priv->ap_fw ? "AP" : "STA",
 	       (priv->fw_rev >> 24) & 0xff, (priv->fw_rev >> 16) & 0xff,
 	       (priv->fw_rev >> 8) & 0xff, priv->fw_rev & 0xff);
 
@@ -3038,8 +3586,8 @@ err_iounmap:
 	if (priv->regs != NULL)
 		pci_iounmap(pdev, priv->regs);
 
-	if (priv->config_wq != NULL)
-		destroy_workqueue(priv->config_wq);
+	if (priv->sram != NULL)
+		pci_iounmap(pdev, priv->sram);
 
 	pci_set_drvdata(pdev, NULL);
 	ieee80211_free_hw(hw);
@@ -3073,9 +3621,6 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev)
 	/* Remove tx reclaim tasklet */
 	tasklet_kill(&priv->tx_reclaim_task);
 
-	/* Stop config thread */
-	destroy_workqueue(priv->config_wq);
-
 	/* Stop hardware */
 	mwl8k_hw_reset(priv);
 
@@ -3088,10 +3633,10 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev)
 
 	mwl8k_rxq_deinit(hw, 0);
 
-	pci_free_consistent(priv->pdev, 4,
-				priv->cookie, priv->cookie_dma);
+	pci_free_consistent(priv->pdev, 4, priv->cookie, priv->cookie_dma);
 
 	pci_iounmap(pdev, priv->regs);
+	pci_iounmap(pdev, priv->sram);
 	pci_set_drvdata(pdev, NULL);
 	ieee80211_free_hw(hw);
 	pci_release_regions(pdev);
@@ -3100,7 +3645,7 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev)
 
 static struct pci_driver mwl8k_driver = {
 	.name		= MWL8K_NAME,
-	.id_table	= mwl8k_table,
+	.id_table	= mwl8k_pci_id_table,
 	.probe		= mwl8k_probe,
 	.remove		= __devexit_p(mwl8k_remove),
 	.shutdown	= __devexit_p(mwl8k_shutdown),
@@ -3118,3 +3663,8 @@ static void __exit mwl8k_exit(void)
 
 module_init(mwl8k_init);
 module_exit(mwl8k_exit);
+
+MODULE_DESCRIPTION(MWL8K_DESC);
+MODULE_VERSION(MWL8K_VERSION);
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig
index dce652054af..e2a2c18920a 100644
--- a/drivers/net/wireless/orinoco/Kconfig
+++ b/drivers/net/wireless/orinoco/Kconfig
@@ -1,6 +1,6 @@
 config HERMES
 	tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
-	depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
+	depends on (PPC_PMAC || PCI || PCMCIA)
 	depends on CFG80211 && CFG80211_WEXT
 	select WIRELESS_EXT
 	select WEXT_SPY
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index b45d6a4ed1e..b0342a520bf 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -1,6 +1,6 @@
 config P54_COMMON
 	tristate "Softmac Prism54 support"
-	depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
+	depends on MAC80211 && EXPERIMENTAL
 	select FW_LOADER
 	---help---
 	  This is common code for isl38xx/stlc45xx based modules.
diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c
index 0efe67deede..8e3818f6832 100644
--- a/drivers/net/wireless/p54/eeprom.c
+++ b/drivers/net/wireless/p54/eeprom.c
@@ -126,7 +126,7 @@ static int p54_generate_band(struct ieee80211_hw *dev,
 	int ret = -ENOMEM;
 
 	if ((!list->entries) || (!list->band_channel_num[band]))
-		return 0;
+		return -EINVAL;
 
 	tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
 	if (!tmp)
@@ -158,6 +158,7 @@ static int p54_generate_band(struct ieee80211_hw *dev,
 			       (list->channels[i].data & CHAN_HAS_CURVE ? "" :
 				" [curve data]"),
 			       list->channels[i].index, list->channels[i].freq);
+			continue;
 		}
 
 		tmp->channels[j].band = list->channels[i].band;
@@ -165,7 +166,16 @@ static int p54_generate_band(struct ieee80211_hw *dev,
 		j++;
 	}
 
-	tmp->n_channels = list->band_channel_num[band];
+	if (j == 0) {
+		printk(KERN_ERR "%s: Disabling totally damaged %s band.\n",
+		       wiphy_name(dev->wiphy), (band == IEEE80211_BAND_2GHZ) ?
+		       "2 GHz" : "5 GHz");
+
+		ret = -ENODATA;
+		goto err_out;
+	}
+
+	tmp->n_channels = j;
 	old = priv->band_table[band];
 	priv->band_table[band] = tmp;
 	if (old) {
@@ -228,13 +238,13 @@ static int p54_generate_channel_lists(struct ieee80211_hw *dev)
 	struct p54_common *priv = dev->priv;
 	struct p54_channel_list *list;
 	unsigned int i, j, max_channel_num;
-	int ret = -ENOMEM;
+	int ret = 0;
 	u16 freq;
 
 	if ((priv->iq_autocal_len != priv->curve_data->entries) ||
 	    (priv->iq_autocal_len != priv->output_limit->entries))
-		printk(KERN_ERR "%s: EEPROM is damaged... you may not be able"
-				"to use all channels with this device.\n",
+		printk(KERN_ERR "%s: Unsupported or damaged EEPROM detected. "
+				"You may not be able to use all channels.\n",
 				wiphy_name(dev->wiphy));
 
 	max_channel_num = max_t(unsigned int, priv->output_limit->entries,
@@ -243,8 +253,10 @@ static int p54_generate_channel_lists(struct ieee80211_hw *dev)
 				priv->curve_data->entries);
 
 	list = kzalloc(sizeof(*list), GFP_KERNEL);
-	if (!list)
+	if (!list) {
+		ret = -ENOMEM;
 		goto free;
+	}
 
 	list->max_entries = max_channel_num;
 	list->channels = kzalloc(sizeof(struct p54_channel_entry) *
@@ -282,13 +294,8 @@ static int p54_generate_channel_lists(struct ieee80211_hw *dev)
 	     p54_compare_channels, NULL);
 
 	for (i = 0, j = 0; i < IEEE80211_NUM_BANDS; i++) {
-		if (list->band_channel_num[i]) {
-			ret = p54_generate_band(dev, list, i);
-			if (ret)
-				goto free;
-
+		if (p54_generate_band(dev, list, i) == 0)
 			j++;
-		}
 	}
 	if (j == 0) {
 		/* no useable band available. */
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 390c0c7b3ac..bf60689aaab 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -1,6 +1,6 @@
 menuconfig RT2X00
 	tristate "Ralink driver support"
-	depends on MAC80211 && WLAN_80211
+	depends on MAC80211
 	---help---
 	  This will enable the support for the Ralink drivers,
 	  developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
@@ -64,8 +64,9 @@ config RT2800PCI_SOC
 	default y
 
 config RT2800PCI
-	tristate "Ralink rt2800 (PCI/PCMCIA) support"
+	tristate "Ralink rt2800 (PCI/PCMCIA) support (VERY EXPERIMENTAL)"
 	depends on (RT2800PCI_PCI || RT2800PCI_SOC) && EXPERIMENTAL
+	select RT2800_LIB
 	select RT2X00_LIB_PCI if RT2800PCI_PCI
 	select RT2X00_LIB_SOC if RT2800PCI_SOC
 	select RT2X00_LIB_HT
@@ -77,6 +78,9 @@ config RT2800PCI
 	  This adds support for rt2800 wireless chipset family.
 	  Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890 & RT3052
 
+	  This driver is non-functional at the moment and is intended for
+	  developers.
+
 	  When compiled as a module, this driver will be called "rt2800pci.ko".
 
 config RT2500USB
@@ -104,8 +108,9 @@ config RT73USB
 	  When compiled as a module, this driver will be called rt73usb.
 
 config RT2800USB
-	tristate "Ralink rt2800 (USB) support"
+	tristate "Ralink rt2800 (USB) support (EXPERIMENTAL)"
 	depends on USB && EXPERIMENTAL
+	select RT2800_LIB
 	select RT2X00_LIB_USB
 	select RT2X00_LIB_HT
 	select RT2X00_LIB_FIRMWARE
@@ -115,8 +120,15 @@ config RT2800USB
 	  This adds experimental support for rt2800 wireless chipset family.
 	  Supported chips: RT2770, RT2870 & RT3070.
 
+	  Known issues:
+	  - support for RT2870 chips doesn't work with 802.11n APs yet
+	  - support for RT3070 chips is non-functional at the moment
+
 	  When compiled as a module, this driver will be called "rt2800usb.ko".
 
+config RT2800_LIB
+	tristate
+
 config RT2X00_LIB_PCI
 	tristate
 	select RT2X00_LIB
diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
index 912f5f67e15..97133985829 100644
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_RT2X00_LIB)		+= rt2x00lib.o
 obj-$(CONFIG_RT2X00_LIB_PCI)		+= rt2x00pci.o
 obj-$(CONFIG_RT2X00_LIB_SOC)		+= rt2x00soc.o
 obj-$(CONFIG_RT2X00_LIB_USB)		+= rt2x00usb.o
+obj-$(CONFIG_RT2800_LIB)		+= rt2800lib.o
 obj-$(CONFIG_RT2400PCI)			+= rt2400pci.o
 obj-$(CONFIG_RT2500PCI)			+= rt2500pci.o
 obj-$(CONFIG_RT61PCI)			+= rt61pci.o
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
new file mode 100644
index 00000000000..d9b6a72e6d2
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -0,0 +1,1816 @@
+/*
+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2800
+	Abstract: Data structures and registers for the rt2800 modules.
+	Supported chipsets: RT2800E, RT2800ED & RT2800U.
+ */
+
+#ifndef RT2800_H
+#define RT2800_H
+
+/*
+ * RF chip defines.
+ *
+ * RF2820 2.4G 2T3R
+ * RF2850 2.4G/5G 2T3R
+ * RF2720 2.4G 1T2R
+ * RF2750 2.4G/5G 1T2R
+ * RF3020 2.4G 1T1R
+ * RF2020 2.4G B/G
+ * RF3021 2.4G 1T2R
+ * RF3022 2.4G 2T2R
+ * RF3052 2.4G 2T2R
+ */
+#define RF2820				0x0001
+#define RF2850				0x0002
+#define RF2720				0x0003
+#define RF2750				0x0004
+#define RF3020				0x0005
+#define RF2020				0x0006
+#define RF3021				0x0007
+#define RF3022				0x0008
+#define RF3052				0x0009
+
+/*
+ * Chipset version.
+ */
+#define RT2860C_VERSION			0x28600100
+#define RT2860D_VERSION			0x28600101
+#define RT2880E_VERSION			0x28720200
+#define RT2883_VERSION			0x28830300
+#define RT3070_VERSION			0x30700200
+
+/*
+ * Signal information.
+ * Default offset is required for RSSI <-> dBm conversion.
+ */
+#define DEFAULT_RSSI_OFFSET		120 /* FIXME */
+
+/*
+ * Register layout information.
+ */
+#define CSR_REG_BASE			0x1000
+#define CSR_REG_SIZE			0x0800
+#define EEPROM_BASE			0x0000
+#define EEPROM_SIZE			0x0110
+#define BBP_BASE			0x0000
+#define BBP_SIZE			0x0080
+#define RF_BASE				0x0004
+#define RF_SIZE				0x0010
+
+/*
+ * Number of TX queues.
+ */
+#define NUM_TX_QUEUES			4
+
+/*
+ * USB registers.
+ */
+
+/*
+ * INT_SOURCE_CSR: Interrupt source register.
+ * Write one to clear corresponding bit.
+ * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
+ */
+#define INT_SOURCE_CSR			0x0200
+#define INT_SOURCE_CSR_RXDELAYINT	FIELD32(0x00000001)
+#define INT_SOURCE_CSR_TXDELAYINT	FIELD32(0x00000002)
+#define INT_SOURCE_CSR_RX_DONE		FIELD32(0x00000004)
+#define INT_SOURCE_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
+#define INT_SOURCE_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
+#define INT_SOURCE_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
+#define INT_SOURCE_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
+#define INT_SOURCE_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
+#define INT_SOURCE_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
+#define INT_SOURCE_CSR_MCU_COMMAND	FIELD32(0x00000200)
+#define INT_SOURCE_CSR_RXTX_COHERENT	FIELD32(0x00000400)
+#define INT_SOURCE_CSR_TBTT		FIELD32(0x00000800)
+#define INT_SOURCE_CSR_PRE_TBTT		FIELD32(0x00001000)
+#define INT_SOURCE_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
+#define INT_SOURCE_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
+#define INT_SOURCE_CSR_GPTIMER		FIELD32(0x00008000)
+#define INT_SOURCE_CSR_RX_COHERENT	FIELD32(0x00010000)
+#define INT_SOURCE_CSR_TX_COHERENT	FIELD32(0x00020000)
+
+/*
+ * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
+ */
+#define INT_MASK_CSR			0x0204
+#define INT_MASK_CSR_RXDELAYINT		FIELD32(0x00000001)
+#define INT_MASK_CSR_TXDELAYINT		FIELD32(0x00000002)
+#define INT_MASK_CSR_RX_DONE		FIELD32(0x00000004)
+#define INT_MASK_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
+#define INT_MASK_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
+#define INT_MASK_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
+#define INT_MASK_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
+#define INT_MASK_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
+#define INT_MASK_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
+#define INT_MASK_CSR_MCU_COMMAND	FIELD32(0x00000200)
+#define INT_MASK_CSR_RXTX_COHERENT	FIELD32(0x00000400)
+#define INT_MASK_CSR_TBTT		FIELD32(0x00000800)
+#define INT_MASK_CSR_PRE_TBTT		FIELD32(0x00001000)
+#define INT_MASK_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
+#define INT_MASK_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
+#define INT_MASK_CSR_GPTIMER		FIELD32(0x00008000)
+#define INT_MASK_CSR_RX_COHERENT	FIELD32(0x00010000)
+#define INT_MASK_CSR_TX_COHERENT	FIELD32(0x00020000)
+
+/*
+ * WPDMA_GLO_CFG
+ */
+#define WPDMA_GLO_CFG 			0x0208
+#define WPDMA_GLO_CFG_ENABLE_TX_DMA	FIELD32(0x00000001)
+#define WPDMA_GLO_CFG_TX_DMA_BUSY    	FIELD32(0x00000002)
+#define WPDMA_GLO_CFG_ENABLE_RX_DMA	FIELD32(0x00000004)
+#define WPDMA_GLO_CFG_RX_DMA_BUSY	FIELD32(0x00000008)
+#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE	FIELD32(0x00000030)
+#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE	FIELD32(0x00000040)
+#define WPDMA_GLO_CFG_BIG_ENDIAN	FIELD32(0x00000080)
+#define WPDMA_GLO_CFG_RX_HDR_SCATTER	FIELD32(0x0000ff00)
+#define WPDMA_GLO_CFG_HDR_SEG_LEN	FIELD32(0xffff0000)
+
+/*
+ * WPDMA_RST_IDX
+ */
+#define WPDMA_RST_IDX 			0x020c
+#define WPDMA_RST_IDX_DTX_IDX0		FIELD32(0x00000001)
+#define WPDMA_RST_IDX_DTX_IDX1		FIELD32(0x00000002)
+#define WPDMA_RST_IDX_DTX_IDX2		FIELD32(0x00000004)
+#define WPDMA_RST_IDX_DTX_IDX3		FIELD32(0x00000008)
+#define WPDMA_RST_IDX_DTX_IDX4		FIELD32(0x00000010)
+#define WPDMA_RST_IDX_DTX_IDX5		FIELD32(0x00000020)
+#define WPDMA_RST_IDX_DRX_IDX0		FIELD32(0x00010000)
+
+/*
+ * DELAY_INT_CFG
+ */
+#define DELAY_INT_CFG			0x0210
+#define DELAY_INT_CFG_RXMAX_PTIME	FIELD32(0x000000ff)
+#define DELAY_INT_CFG_RXMAX_PINT	FIELD32(0x00007f00)
+#define DELAY_INT_CFG_RXDLY_INT_EN	FIELD32(0x00008000)
+#define DELAY_INT_CFG_TXMAX_PTIME	FIELD32(0x00ff0000)
+#define DELAY_INT_CFG_TXMAX_PINT	FIELD32(0x7f000000)
+#define DELAY_INT_CFG_TXDLY_INT_EN	FIELD32(0x80000000)
+
+/*
+ * WMM_AIFSN_CFG: Aifsn for each EDCA AC
+ * AIFSN0: AC_BE
+ * AIFSN1: AC_BK
+ * AIFSN2: AC_VI
+ * AIFSN3: AC_VO
+ */
+#define WMM_AIFSN_CFG			0x0214
+#define WMM_AIFSN_CFG_AIFSN0		FIELD32(0x0000000f)
+#define WMM_AIFSN_CFG_AIFSN1		FIELD32(0x000000f0)
+#define WMM_AIFSN_CFG_AIFSN2		FIELD32(0x00000f00)
+#define WMM_AIFSN_CFG_AIFSN3		FIELD32(0x0000f000)
+
+/*
+ * WMM_CWMIN_CSR: CWmin for each EDCA AC
+ * CWMIN0: AC_BE
+ * CWMIN1: AC_BK
+ * CWMIN2: AC_VI
+ * CWMIN3: AC_VO
+ */
+#define WMM_CWMIN_CFG			0x0218
+#define WMM_CWMIN_CFG_CWMIN0		FIELD32(0x0000000f)
+#define WMM_CWMIN_CFG_CWMIN1		FIELD32(0x000000f0)
+#define WMM_CWMIN_CFG_CWMIN2		FIELD32(0x00000f00)
+#define WMM_CWMIN_CFG_CWMIN3		FIELD32(0x0000f000)
+
+/*
+ * WMM_CWMAX_CSR: CWmax for each EDCA AC
+ * CWMAX0: AC_BE
+ * CWMAX1: AC_BK
+ * CWMAX2: AC_VI
+ * CWMAX3: AC_VO
+ */
+#define WMM_CWMAX_CFG			0x021c
+#define WMM_CWMAX_CFG_CWMAX0		FIELD32(0x0000000f)
+#define WMM_CWMAX_CFG_CWMAX1		FIELD32(0x000000f0)
+#define WMM_CWMAX_CFG_CWMAX2		FIELD32(0x00000f00)
+#define WMM_CWMAX_CFG_CWMAX3		FIELD32(0x0000f000)
+
+/*
+ * AC_TXOP0: AC_BK/AC_BE TXOP register
+ * AC0TXOP: AC_BK in unit of 32us
+ * AC1TXOP: AC_BE in unit of 32us
+ */
+#define WMM_TXOP0_CFG			0x0220
+#define WMM_TXOP0_CFG_AC0TXOP		FIELD32(0x0000ffff)
+#define WMM_TXOP0_CFG_AC1TXOP		FIELD32(0xffff0000)
+
+/*
+ * AC_TXOP1: AC_VO/AC_VI TXOP register
+ * AC2TXOP: AC_VI in unit of 32us
+ * AC3TXOP: AC_VO in unit of 32us
+ */
+#define WMM_TXOP1_CFG			0x0224
+#define WMM_TXOP1_CFG_AC2TXOP		FIELD32(0x0000ffff)
+#define WMM_TXOP1_CFG_AC3TXOP		FIELD32(0xffff0000)
+
+/*
+ * GPIO_CTRL_CFG:
+ */
+#define GPIO_CTRL_CFG			0x0228
+#define GPIO_CTRL_CFG_BIT0		FIELD32(0x00000001)
+#define GPIO_CTRL_CFG_BIT1		FIELD32(0x00000002)
+#define GPIO_CTRL_CFG_BIT2		FIELD32(0x00000004)
+#define GPIO_CTRL_CFG_BIT3		FIELD32(0x00000008)
+#define GPIO_CTRL_CFG_BIT4		FIELD32(0x00000010)
+#define GPIO_CTRL_CFG_BIT5		FIELD32(0x00000020)
+#define GPIO_CTRL_CFG_BIT6		FIELD32(0x00000040)
+#define GPIO_CTRL_CFG_BIT7		FIELD32(0x00000080)
+#define GPIO_CTRL_CFG_BIT8		FIELD32(0x00000100)
+
+/*
+ * MCU_CMD_CFG
+ */
+#define MCU_CMD_CFG			0x022c
+
+/*
+ * AC_BK register offsets
+ */
+#define TX_BASE_PTR0			0x0230
+#define TX_MAX_CNT0			0x0234
+#define TX_CTX_IDX0			0x0238
+#define TX_DTX_IDX0			0x023c
+
+/*
+ * AC_BE register offsets
+ */
+#define TX_BASE_PTR1			0x0240
+#define TX_MAX_CNT1			0x0244
+#define TX_CTX_IDX1			0x0248
+#define TX_DTX_IDX1			0x024c
+
+/*
+ * AC_VI register offsets
+ */
+#define TX_BASE_PTR2			0x0250
+#define TX_MAX_CNT2			0x0254
+#define TX_CTX_IDX2			0x0258
+#define TX_DTX_IDX2			0x025c
+
+/*
+ * AC_VO register offsets
+ */
+#define TX_BASE_PTR3			0x0260
+#define TX_MAX_CNT3			0x0264
+#define TX_CTX_IDX3			0x0268
+#define TX_DTX_IDX3			0x026c
+
+/*
+ * HCCA register offsets
+ */
+#define TX_BASE_PTR4			0x0270
+#define TX_MAX_CNT4			0x0274
+#define TX_CTX_IDX4			0x0278
+#define TX_DTX_IDX4			0x027c
+
+/*
+ * MGMT register offsets
+ */
+#define TX_BASE_PTR5			0x0280
+#define TX_MAX_CNT5			0x0284
+#define TX_CTX_IDX5			0x0288
+#define TX_DTX_IDX5			0x028c
+
+/*
+ * RX register offsets
+ */
+#define RX_BASE_PTR			0x0290
+#define RX_MAX_CNT			0x0294
+#define RX_CRX_IDX			0x0298
+#define RX_DRX_IDX			0x029c
+
+/*
+ * PBF_SYS_CTRL
+ * HOST_RAM_WRITE: enable Host program ram write selection
+ */
+#define PBF_SYS_CTRL			0x0400
+#define PBF_SYS_CTRL_READY		FIELD32(0x00000080)
+#define PBF_SYS_CTRL_HOST_RAM_WRITE	FIELD32(0x00010000)
+
+/*
+ * HOST-MCU shared memory
+ */
+#define HOST_CMD_CSR			0x0404
+#define HOST_CMD_CSR_HOST_COMMAND	FIELD32(0x000000ff)
+
+/*
+ * PBF registers
+ * Most are for debug. Driver doesn't touch PBF register.
+ */
+#define PBF_CFG				0x0408
+#define PBF_MAX_PCNT			0x040c
+#define PBF_CTRL			0x0410
+#define PBF_INT_STA			0x0414
+#define PBF_INT_ENA			0x0418
+
+/*
+ * BCN_OFFSET0:
+ */
+#define BCN_OFFSET0			0x042c
+#define BCN_OFFSET0_BCN0		FIELD32(0x000000ff)
+#define BCN_OFFSET0_BCN1		FIELD32(0x0000ff00)
+#define BCN_OFFSET0_BCN2		FIELD32(0x00ff0000)
+#define BCN_OFFSET0_BCN3		FIELD32(0xff000000)
+
+/*
+ * BCN_OFFSET1:
+ */
+#define BCN_OFFSET1			0x0430
+#define BCN_OFFSET1_BCN4		FIELD32(0x000000ff)
+#define BCN_OFFSET1_BCN5		FIELD32(0x0000ff00)
+#define BCN_OFFSET1_BCN6		FIELD32(0x00ff0000)
+#define BCN_OFFSET1_BCN7		FIELD32(0xff000000)
+
+/*
+ * PBF registers
+ * Most are for debug. Driver doesn't touch PBF register.
+ */
+#define TXRXQ_PCNT			0x0438
+#define PBF_DBG				0x043c
+
+/*
+ * RF registers
+ */
+#define	RF_CSR_CFG			0x0500
+#define RF_CSR_CFG_DATA			FIELD32(0x000000ff)
+#define RF_CSR_CFG_REGNUM		FIELD32(0x00001f00)
+#define RF_CSR_CFG_WRITE		FIELD32(0x00010000)
+#define RF_CSR_CFG_BUSY			FIELD32(0x00020000)
+
+/*
+ * MAC Control/Status Registers(CSR).
+ * Some values are set in TU, whereas 1 TU == 1024 us.
+ */
+
+/*
+ * MAC_CSR0: ASIC revision number.
+ * ASIC_REV: 0
+ * ASIC_VER: 2860 or 2870
+ */
+#define MAC_CSR0			0x1000
+#define MAC_CSR0_ASIC_REV		FIELD32(0x0000ffff)
+#define MAC_CSR0_ASIC_VER		FIELD32(0xffff0000)
+
+/*
+ * MAC_SYS_CTRL:
+ */
+#define MAC_SYS_CTRL			0x1004
+#define MAC_SYS_CTRL_RESET_CSR		FIELD32(0x00000001)
+#define MAC_SYS_CTRL_RESET_BBP		FIELD32(0x00000002)
+#define MAC_SYS_CTRL_ENABLE_TX		FIELD32(0x00000004)
+#define MAC_SYS_CTRL_ENABLE_RX		FIELD32(0x00000008)
+#define MAC_SYS_CTRL_CONTINUOUS_TX	FIELD32(0x00000010)
+#define MAC_SYS_CTRL_LOOPBACK		FIELD32(0x00000020)
+#define MAC_SYS_CTRL_WLAN_HALT		FIELD32(0x00000040)
+#define MAC_SYS_CTRL_RX_TIMESTAMP	FIELD32(0x00000080)
+
+/*
+ * MAC_ADDR_DW0: STA MAC register 0
+ */
+#define MAC_ADDR_DW0			0x1008
+#define MAC_ADDR_DW0_BYTE0		FIELD32(0x000000ff)
+#define MAC_ADDR_DW0_BYTE1		FIELD32(0x0000ff00)
+#define MAC_ADDR_DW0_BYTE2		FIELD32(0x00ff0000)
+#define MAC_ADDR_DW0_BYTE3		FIELD32(0xff000000)
+
+/*
+ * MAC_ADDR_DW1: STA MAC register 1
+ * UNICAST_TO_ME_MASK:
+ * Used to mask off bits from byte 5 of the MAC address
+ * to determine the UNICAST_TO_ME bit for RX frames.
+ * The full mask is complemented by BSS_ID_MASK:
+ *    MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
+ */
+#define MAC_ADDR_DW1			0x100c
+#define MAC_ADDR_DW1_BYTE4		FIELD32(0x000000ff)
+#define MAC_ADDR_DW1_BYTE5		FIELD32(0x0000ff00)
+#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK	FIELD32(0x00ff0000)
+
+/*
+ * MAC_BSSID_DW0: BSSID register 0
+ */
+#define MAC_BSSID_DW0			0x1010
+#define MAC_BSSID_DW0_BYTE0		FIELD32(0x000000ff)
+#define MAC_BSSID_DW0_BYTE1		FIELD32(0x0000ff00)
+#define MAC_BSSID_DW0_BYTE2		FIELD32(0x00ff0000)
+#define MAC_BSSID_DW0_BYTE3		FIELD32(0xff000000)
+
+/*
+ * MAC_BSSID_DW1: BSSID register 1
+ * BSS_ID_MASK:
+ *     0: 1-BSSID mode (BSS index = 0)
+ *     1: 2-BSSID mode (BSS index: Byte5, bit 0)
+ *     2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
+ *     3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
+ * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
+ * BSSID. This will make sure that those bits will be ignored
+ * when determining the MY_BSS of RX frames.
+ */
+#define MAC_BSSID_DW1			0x1014
+#define MAC_BSSID_DW1_BYTE4		FIELD32(0x000000ff)
+#define MAC_BSSID_DW1_BYTE5		FIELD32(0x0000ff00)
+#define MAC_BSSID_DW1_BSS_ID_MASK	FIELD32(0x00030000)
+#define MAC_BSSID_DW1_BSS_BCN_NUM	FIELD32(0x001c0000)
+
+/*
+ * MAX_LEN_CFG: Maximum frame length register.
+ * MAX_MPDU: rt2860b max 16k bytes
+ * MAX_PSDU: Maximum PSDU length
+ *	(power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
+ */
+#define MAX_LEN_CFG			0x1018
+#define MAX_LEN_CFG_MAX_MPDU		FIELD32(0x00000fff)
+#define MAX_LEN_CFG_MAX_PSDU		FIELD32(0x00003000)
+#define MAX_LEN_CFG_MIN_PSDU		FIELD32(0x0000c000)
+#define MAX_LEN_CFG_MIN_MPDU		FIELD32(0x000f0000)
+
+/*
+ * BBP_CSR_CFG: BBP serial control register
+ * VALUE: Register value to program into BBP
+ * REG_NUM: Selected BBP register
+ * READ_CONTROL: 0 write BBP, 1 read BBP
+ * BUSY: ASIC is busy executing BBP commands
+ * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
+ * BBP_RW_MODE: 0 serial, 1 paralell
+ */
+#define BBP_CSR_CFG			0x101c
+#define BBP_CSR_CFG_VALUE		FIELD32(0x000000ff)
+#define BBP_CSR_CFG_REGNUM		FIELD32(0x0000ff00)
+#define BBP_CSR_CFG_READ_CONTROL	FIELD32(0x00010000)
+#define BBP_CSR_CFG_BUSY		FIELD32(0x00020000)
+#define BBP_CSR_CFG_BBP_PAR_DUR		FIELD32(0x00040000)
+#define BBP_CSR_CFG_BBP_RW_MODE		FIELD32(0x00080000)
+
+/*
+ * RF_CSR_CFG0: RF control register
+ * REGID_AND_VALUE: Register value to program into RF
+ * BITWIDTH: Selected RF register
+ * STANDBYMODE: 0 high when standby, 1 low when standby
+ * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
+ * BUSY: ASIC is busy executing RF commands
+ */
+#define RF_CSR_CFG0			0x1020
+#define RF_CSR_CFG0_REGID_AND_VALUE	FIELD32(0x00ffffff)
+#define RF_CSR_CFG0_BITWIDTH		FIELD32(0x1f000000)
+#define RF_CSR_CFG0_REG_VALUE_BW	FIELD32(0x1fffffff)
+#define RF_CSR_CFG0_STANDBYMODE		FIELD32(0x20000000)
+#define RF_CSR_CFG0_SEL			FIELD32(0x40000000)
+#define RF_CSR_CFG0_BUSY		FIELD32(0x80000000)
+
+/*
+ * RF_CSR_CFG1: RF control register
+ * REGID_AND_VALUE: Register value to program into RF
+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
+ *        0: 3 system clock cycle (37.5usec)
+ *        1: 5 system clock cycle (62.5usec)
+ */
+#define RF_CSR_CFG1			0x1024
+#define RF_CSR_CFG1_REGID_AND_VALUE	FIELD32(0x00ffffff)
+#define RF_CSR_CFG1_RFGAP		FIELD32(0x1f000000)
+
+/*
+ * RF_CSR_CFG2: RF control register
+ * VALUE: Register value to program into RF
+ */
+#define RF_CSR_CFG2			0x1028
+#define RF_CSR_CFG2_VALUE		FIELD32(0x00ffffff)
+
+/*
+ * LED_CFG: LED control
+ * color LED's:
+ *   0: off
+ *   1: blinking upon TX2
+ *   2: periodic slow blinking
+ *   3: always on
+ * LED polarity:
+ *   0: active low
+ *   1: active high
+ */
+#define LED_CFG				0x102c
+#define LED_CFG_ON_PERIOD		FIELD32(0x000000ff)
+#define LED_CFG_OFF_PERIOD		FIELD32(0x0000ff00)
+#define LED_CFG_SLOW_BLINK_PERIOD	FIELD32(0x003f0000)
+#define LED_CFG_R_LED_MODE		FIELD32(0x03000000)
+#define LED_CFG_G_LED_MODE		FIELD32(0x0c000000)
+#define LED_CFG_Y_LED_MODE		FIELD32(0x30000000)
+#define LED_CFG_LED_POLAR		FIELD32(0x40000000)
+
+/*
+ * XIFS_TIME_CFG: MAC timing
+ * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
+ * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
+ * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
+ *	when MAC doesn't reference BBP signal BBRXEND
+ * EIFS: unit 1us
+ * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
+ *
+ */
+#define XIFS_TIME_CFG			0x1100
+#define XIFS_TIME_CFG_CCKM_SIFS_TIME	FIELD32(0x000000ff)
+#define XIFS_TIME_CFG_OFDM_SIFS_TIME	FIELD32(0x0000ff00)
+#define XIFS_TIME_CFG_OFDM_XIFS_TIME	FIELD32(0x000f0000)
+#define XIFS_TIME_CFG_EIFS		FIELD32(0x1ff00000)
+#define XIFS_TIME_CFG_BB_RXEND_ENABLE	FIELD32(0x20000000)
+
+/*
+ * BKOFF_SLOT_CFG:
+ */
+#define BKOFF_SLOT_CFG			0x1104
+#define BKOFF_SLOT_CFG_SLOT_TIME	FIELD32(0x000000ff)
+#define BKOFF_SLOT_CFG_CC_DELAY_TIME	FIELD32(0x0000ff00)
+
+/*
+ * NAV_TIME_CFG:
+ */
+#define NAV_TIME_CFG			0x1108
+#define NAV_TIME_CFG_SIFS		FIELD32(0x000000ff)
+#define NAV_TIME_CFG_SLOT_TIME		FIELD32(0x0000ff00)
+#define NAV_TIME_CFG_EIFS		FIELD32(0x01ff0000)
+#define NAV_TIME_ZERO_SIFS		FIELD32(0x02000000)
+
+/*
+ * CH_TIME_CFG: count as channel busy
+ */
+#define CH_TIME_CFG     	        0x110c
+
+/*
+ * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
+ */
+#define PBF_LIFE_TIMER     	        0x1110
+
+/*
+ * BCN_TIME_CFG:
+ * BEACON_INTERVAL: in unit of 1/16 TU
+ * TSF_TICKING: Enable TSF auto counting
+ * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
+ * BEACON_GEN: Enable beacon generator
+ */
+#define BCN_TIME_CFG			0x1114
+#define BCN_TIME_CFG_BEACON_INTERVAL	FIELD32(0x0000ffff)
+#define BCN_TIME_CFG_TSF_TICKING	FIELD32(0x00010000)
+#define BCN_TIME_CFG_TSF_SYNC		FIELD32(0x00060000)
+#define BCN_TIME_CFG_TBTT_ENABLE	FIELD32(0x00080000)
+#define BCN_TIME_CFG_BEACON_GEN		FIELD32(0x00100000)
+#define BCN_TIME_CFG_TX_TIME_COMPENSATE	FIELD32(0xf0000000)
+
+/*
+ * TBTT_SYNC_CFG:
+ */
+#define TBTT_SYNC_CFG			0x1118
+
+/*
+ * TSF_TIMER_DW0: Local lsb TSF timer, read-only
+ */
+#define TSF_TIMER_DW0			0x111c
+#define TSF_TIMER_DW0_LOW_WORD		FIELD32(0xffffffff)
+
+/*
+ * TSF_TIMER_DW1: Local msb TSF timer, read-only
+ */
+#define TSF_TIMER_DW1			0x1120
+#define TSF_TIMER_DW1_HIGH_WORD		FIELD32(0xffffffff)
+
+/*
+ * TBTT_TIMER: TImer remains till next TBTT, read-only
+ */
+#define TBTT_TIMER			0x1124
+
+/*
+ * INT_TIMER_CFG:
+ */
+#define INT_TIMER_CFG			0x1128
+
+/*
+ * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
+ */
+#define INT_TIMER_EN			0x112c
+
+/*
+ * CH_IDLE_STA: channel idle time
+ */
+#define CH_IDLE_STA			0x1130
+
+/*
+ * CH_BUSY_STA: channel busy time
+ */
+#define CH_BUSY_STA			0x1134
+
+/*
+ * MAC_STATUS_CFG:
+ * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
+ *	if 1 or higher one of the 2 registers is busy.
+ */
+#define MAC_STATUS_CFG			0x1200
+#define MAC_STATUS_CFG_BBP_RF_BUSY	FIELD32(0x00000003)
+
+/*
+ * PWR_PIN_CFG:
+ */
+#define PWR_PIN_CFG			0x1204
+
+/*
+ * AUTOWAKEUP_CFG: Manual power control / status register
+ * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
+ * AUTOWAKE: 0:sleep, 1:awake
+ */
+#define AUTOWAKEUP_CFG			0x1208
+#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME	FIELD32(0x000000ff)
+#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE	FIELD32(0x00007f00)
+#define AUTOWAKEUP_CFG_AUTOWAKE		FIELD32(0x00008000)
+
+/*
+ * EDCA_AC0_CFG:
+ */
+#define EDCA_AC0_CFG			0x1300
+#define EDCA_AC0_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC0_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC0_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC0_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC1_CFG:
+ */
+#define EDCA_AC1_CFG			0x1304
+#define EDCA_AC1_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC1_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC1_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC1_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC2_CFG:
+ */
+#define EDCA_AC2_CFG			0x1308
+#define EDCA_AC2_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC2_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC2_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC2_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC3_CFG:
+ */
+#define EDCA_AC3_CFG			0x130c
+#define EDCA_AC3_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC3_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC3_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC3_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_TID_AC_MAP:
+ */
+#define EDCA_TID_AC_MAP			0x1310
+
+/*
+ * TX_PWR_CFG_0:
+ */
+#define TX_PWR_CFG_0			0x1314
+#define TX_PWR_CFG_0_1MBS		FIELD32(0x0000000f)
+#define TX_PWR_CFG_0_2MBS		FIELD32(0x000000f0)
+#define TX_PWR_CFG_0_55MBS		FIELD32(0x00000f00)
+#define TX_PWR_CFG_0_11MBS		FIELD32(0x0000f000)
+#define TX_PWR_CFG_0_6MBS		FIELD32(0x000f0000)
+#define TX_PWR_CFG_0_9MBS		FIELD32(0x00f00000)
+#define TX_PWR_CFG_0_12MBS		FIELD32(0x0f000000)
+#define TX_PWR_CFG_0_18MBS		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_1:
+ */
+#define TX_PWR_CFG_1			0x1318
+#define TX_PWR_CFG_1_24MBS		FIELD32(0x0000000f)
+#define TX_PWR_CFG_1_36MBS		FIELD32(0x000000f0)
+#define TX_PWR_CFG_1_48MBS		FIELD32(0x00000f00)
+#define TX_PWR_CFG_1_54MBS		FIELD32(0x0000f000)
+#define TX_PWR_CFG_1_MCS0		FIELD32(0x000f0000)
+#define TX_PWR_CFG_1_MCS1		FIELD32(0x00f00000)
+#define TX_PWR_CFG_1_MCS2		FIELD32(0x0f000000)
+#define TX_PWR_CFG_1_MCS3		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_2:
+ */
+#define TX_PWR_CFG_2			0x131c
+#define TX_PWR_CFG_2_MCS4		FIELD32(0x0000000f)
+#define TX_PWR_CFG_2_MCS5		FIELD32(0x000000f0)
+#define TX_PWR_CFG_2_MCS6		FIELD32(0x00000f00)
+#define TX_PWR_CFG_2_MCS7		FIELD32(0x0000f000)
+#define TX_PWR_CFG_2_MCS8		FIELD32(0x000f0000)
+#define TX_PWR_CFG_2_MCS9		FIELD32(0x00f00000)
+#define TX_PWR_CFG_2_MCS10		FIELD32(0x0f000000)
+#define TX_PWR_CFG_2_MCS11		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_3:
+ */
+#define TX_PWR_CFG_3			0x1320
+#define TX_PWR_CFG_3_MCS12		FIELD32(0x0000000f)
+#define TX_PWR_CFG_3_MCS13		FIELD32(0x000000f0)
+#define TX_PWR_CFG_3_MCS14		FIELD32(0x00000f00)
+#define TX_PWR_CFG_3_MCS15		FIELD32(0x0000f000)
+#define TX_PWR_CFG_3_UKNOWN1		FIELD32(0x000f0000)
+#define TX_PWR_CFG_3_UKNOWN2		FIELD32(0x00f00000)
+#define TX_PWR_CFG_3_UKNOWN3		FIELD32(0x0f000000)
+#define TX_PWR_CFG_3_UKNOWN4		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_4:
+ */
+#define TX_PWR_CFG_4			0x1324
+#define TX_PWR_CFG_4_UKNOWN5		FIELD32(0x0000000f)
+#define TX_PWR_CFG_4_UKNOWN6		FIELD32(0x000000f0)
+#define TX_PWR_CFG_4_UKNOWN7		FIELD32(0x00000f00)
+#define TX_PWR_CFG_4_UKNOWN8		FIELD32(0x0000f000)
+
+/*
+ * TX_PIN_CFG:
+ */
+#define TX_PIN_CFG			0x1328
+#define TX_PIN_CFG_PA_PE_A0_EN		FIELD32(0x00000001)
+#define TX_PIN_CFG_PA_PE_G0_EN		FIELD32(0x00000002)
+#define TX_PIN_CFG_PA_PE_A1_EN		FIELD32(0x00000004)
+#define TX_PIN_CFG_PA_PE_G1_EN		FIELD32(0x00000008)
+#define TX_PIN_CFG_PA_PE_A0_POL		FIELD32(0x00000010)
+#define TX_PIN_CFG_PA_PE_G0_POL		FIELD32(0x00000020)
+#define TX_PIN_CFG_PA_PE_A1_POL		FIELD32(0x00000040)
+#define TX_PIN_CFG_PA_PE_G1_POL		FIELD32(0x00000080)
+#define TX_PIN_CFG_LNA_PE_A0_EN		FIELD32(0x00000100)
+#define TX_PIN_CFG_LNA_PE_G0_EN		FIELD32(0x00000200)
+#define TX_PIN_CFG_LNA_PE_A1_EN		FIELD32(0x00000400)
+#define TX_PIN_CFG_LNA_PE_G1_EN		FIELD32(0x00000800)
+#define TX_PIN_CFG_LNA_PE_A0_POL	FIELD32(0x00001000)
+#define TX_PIN_CFG_LNA_PE_G0_POL	FIELD32(0x00002000)
+#define TX_PIN_CFG_LNA_PE_A1_POL	FIELD32(0x00004000)
+#define TX_PIN_CFG_LNA_PE_G1_POL	FIELD32(0x00008000)
+#define TX_PIN_CFG_RFTR_EN		FIELD32(0x00010000)
+#define TX_PIN_CFG_RFTR_POL		FIELD32(0x00020000)
+#define TX_PIN_CFG_TRSW_EN		FIELD32(0x00040000)
+#define TX_PIN_CFG_TRSW_POL		FIELD32(0x00080000)
+
+/*
+ * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
+ */
+#define TX_BAND_CFG			0x132c
+#define TX_BAND_CFG_HT40_PLUS		FIELD32(0x00000001)
+#define TX_BAND_CFG_A			FIELD32(0x00000002)
+#define TX_BAND_CFG_BG			FIELD32(0x00000004)
+
+/*
+ * TX_SW_CFG0:
+ */
+#define TX_SW_CFG0			0x1330
+
+/*
+ * TX_SW_CFG1:
+ */
+#define TX_SW_CFG1			0x1334
+
+/*
+ * TX_SW_CFG2:
+ */
+#define TX_SW_CFG2			0x1338
+
+/*
+ * TXOP_THRES_CFG:
+ */
+#define TXOP_THRES_CFG			0x133c
+
+/*
+ * TXOP_CTRL_CFG:
+ */
+#define TXOP_CTRL_CFG			0x1340
+
+/*
+ * TX_RTS_CFG:
+ * RTS_THRES: unit:byte
+ * RTS_FBK_EN: enable rts rate fallback
+ */
+#define TX_RTS_CFG			0x1344
+#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT	FIELD32(0x000000ff)
+#define TX_RTS_CFG_RTS_THRES		FIELD32(0x00ffff00)
+#define TX_RTS_CFG_RTS_FBK_EN		FIELD32(0x01000000)
+
+/*
+ * TX_TIMEOUT_CFG:
+ * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
+ * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
+ * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
+ *                it is recommended that:
+ *                (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
+ */
+#define TX_TIMEOUT_CFG			0x1348
+#define TX_TIMEOUT_CFG_MPDU_LIFETIME	FIELD32(0x000000f0)
+#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT	FIELD32(0x0000ff00)
+#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT	FIELD32(0x00ff0000)
+
+/*
+ * TX_RTY_CFG:
+ * SHORT_RTY_LIMIT: short retry limit
+ * LONG_RTY_LIMIT: long retry limit
+ * LONG_RTY_THRE: Long retry threshoold
+ * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
+ *                   0:expired by retry limit, 1: expired by mpdu life timer
+ * AGG_RTY_MODE: Aggregate MPDU retry mode
+ *               0:expired by retry limit, 1: expired by mpdu life timer
+ * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
+ */
+#define TX_RTY_CFG			0x134c
+#define TX_RTY_CFG_SHORT_RTY_LIMIT	FIELD32(0x000000ff)
+#define TX_RTY_CFG_LONG_RTY_LIMIT	FIELD32(0x0000ff00)
+#define TX_RTY_CFG_LONG_RTY_THRE	FIELD32(0x0fff0000)
+#define TX_RTY_CFG_NON_AGG_RTY_MODE	FIELD32(0x10000000)
+#define TX_RTY_CFG_AGG_RTY_MODE		FIELD32(0x20000000)
+#define TX_RTY_CFG_TX_AUTO_FB_ENABLE	FIELD32(0x40000000)
+
+/*
+ * TX_LINK_CFG:
+ * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
+ * MFB_ENABLE: TX apply remote MFB 1:enable
+ * REMOTE_UMFS_ENABLE: remote unsolicit  MFB enable
+ *                     0: not apply remote remote unsolicit (MFS=7)
+ * TX_MRQ_EN: MCS request TX enable
+ * TX_RDG_EN: RDG TX enable
+ * TX_CF_ACK_EN: Piggyback CF-ACK enable
+ * REMOTE_MFB: remote MCS feedback
+ * REMOTE_MFS: remote MCS feedback sequence number
+ */
+#define TX_LINK_CFG			0x1350
+#define TX_LINK_CFG_REMOTE_MFB_LIFETIME	FIELD32(0x000000ff)
+#define TX_LINK_CFG_MFB_ENABLE		FIELD32(0x00000100)
+#define TX_LINK_CFG_REMOTE_UMFS_ENABLE	FIELD32(0x00000200)
+#define TX_LINK_CFG_TX_MRQ_EN		FIELD32(0x00000400)
+#define TX_LINK_CFG_TX_RDG_EN		FIELD32(0x00000800)
+#define TX_LINK_CFG_TX_CF_ACK_EN	FIELD32(0x00001000)
+#define TX_LINK_CFG_REMOTE_MFB		FIELD32(0x00ff0000)
+#define TX_LINK_CFG_REMOTE_MFS		FIELD32(0xff000000)
+
+/*
+ * HT_FBK_CFG0:
+ */
+#define HT_FBK_CFG0			0x1354
+#define HT_FBK_CFG0_HTMCS0FBK		FIELD32(0x0000000f)
+#define HT_FBK_CFG0_HTMCS1FBK		FIELD32(0x000000f0)
+#define HT_FBK_CFG0_HTMCS2FBK		FIELD32(0x00000f00)
+#define HT_FBK_CFG0_HTMCS3FBK		FIELD32(0x0000f000)
+#define HT_FBK_CFG0_HTMCS4FBK		FIELD32(0x000f0000)
+#define HT_FBK_CFG0_HTMCS5FBK		FIELD32(0x00f00000)
+#define HT_FBK_CFG0_HTMCS6FBK		FIELD32(0x0f000000)
+#define HT_FBK_CFG0_HTMCS7FBK		FIELD32(0xf0000000)
+
+/*
+ * HT_FBK_CFG1:
+ */
+#define HT_FBK_CFG1			0x1358
+#define HT_FBK_CFG1_HTMCS8FBK		FIELD32(0x0000000f)
+#define HT_FBK_CFG1_HTMCS9FBK		FIELD32(0x000000f0)
+#define HT_FBK_CFG1_HTMCS10FBK		FIELD32(0x00000f00)
+#define HT_FBK_CFG1_HTMCS11FBK		FIELD32(0x0000f000)
+#define HT_FBK_CFG1_HTMCS12FBK		FIELD32(0x000f0000)
+#define HT_FBK_CFG1_HTMCS13FBK		FIELD32(0x00f00000)
+#define HT_FBK_CFG1_HTMCS14FBK		FIELD32(0x0f000000)
+#define HT_FBK_CFG1_HTMCS15FBK		FIELD32(0xf0000000)
+
+/*
+ * LG_FBK_CFG0:
+ */
+#define LG_FBK_CFG0			0x135c
+#define LG_FBK_CFG0_OFDMMCS0FBK		FIELD32(0x0000000f)
+#define LG_FBK_CFG0_OFDMMCS1FBK		FIELD32(0x000000f0)
+#define LG_FBK_CFG0_OFDMMCS2FBK		FIELD32(0x00000f00)
+#define LG_FBK_CFG0_OFDMMCS3FBK		FIELD32(0x0000f000)
+#define LG_FBK_CFG0_OFDMMCS4FBK		FIELD32(0x000f0000)
+#define LG_FBK_CFG0_OFDMMCS5FBK		FIELD32(0x00f00000)
+#define LG_FBK_CFG0_OFDMMCS6FBK		FIELD32(0x0f000000)
+#define LG_FBK_CFG0_OFDMMCS7FBK		FIELD32(0xf0000000)
+
+/*
+ * LG_FBK_CFG1:
+ */
+#define LG_FBK_CFG1			0x1360
+#define LG_FBK_CFG0_CCKMCS0FBK		FIELD32(0x0000000f)
+#define LG_FBK_CFG0_CCKMCS1FBK		FIELD32(0x000000f0)
+#define LG_FBK_CFG0_CCKMCS2FBK		FIELD32(0x00000f00)
+#define LG_FBK_CFG0_CCKMCS3FBK		FIELD32(0x0000f000)
+
+/*
+ * CCK_PROT_CFG: CCK Protection
+ * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
+ * PROTECT_CTRL: Protection control frame type for CCK TX
+ *               0:none, 1:RTS/CTS, 2:CTS-to-self
+ * PROTECT_NAV: TXOP protection type for CCK TX
+ *              0:none, 1:ShortNAVprotect, 2:LongNAVProtect
+ * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
+ * RTS_TH_EN: RTS threshold enable on CCK TX
+ */
+#define CCK_PROT_CFG			0x1364
+#define CCK_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define CCK_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define CCK_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define CCK_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * OFDM_PROT_CFG: OFDM Protection
+ */
+#define OFDM_PROT_CFG			0x1368
+#define OFDM_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define OFDM_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define OFDM_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define OFDM_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * MM20_PROT_CFG: MM20 Protection
+ */
+#define MM20_PROT_CFG			0x136c
+#define MM20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define MM20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define MM20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define MM20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * MM40_PROT_CFG: MM40 Protection
+ */
+#define MM40_PROT_CFG			0x1370
+#define MM40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define MM40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define MM40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define MM40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * GF20_PROT_CFG: GF20 Protection
+ */
+#define GF20_PROT_CFG			0x1374
+#define GF20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define GF20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define GF20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define GF20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * GF40_PROT_CFG: GF40 Protection
+ */
+#define GF40_PROT_CFG			0x1378
+#define GF40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define GF40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define GF40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define GF40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * EXP_CTS_TIME:
+ */
+#define EXP_CTS_TIME			0x137c
+
+/*
+ * EXP_ACK_TIME:
+ */
+#define EXP_ACK_TIME			0x1380
+
+/*
+ * RX_FILTER_CFG: RX configuration register.
+ */
+#define RX_FILTER_CFG			0x1400
+#define RX_FILTER_CFG_DROP_CRC_ERROR	FIELD32(0x00000001)
+#define RX_FILTER_CFG_DROP_PHY_ERROR	FIELD32(0x00000002)
+#define RX_FILTER_CFG_DROP_NOT_TO_ME	FIELD32(0x00000004)
+#define RX_FILTER_CFG_DROP_NOT_MY_BSSD	FIELD32(0x00000008)
+#define RX_FILTER_CFG_DROP_VER_ERROR	FIELD32(0x00000010)
+#define RX_FILTER_CFG_DROP_MULTICAST	FIELD32(0x00000020)
+#define RX_FILTER_CFG_DROP_BROADCAST	FIELD32(0x00000040)
+#define RX_FILTER_CFG_DROP_DUPLICATE	FIELD32(0x00000080)
+#define RX_FILTER_CFG_DROP_CF_END_ACK	FIELD32(0x00000100)
+#define RX_FILTER_CFG_DROP_CF_END	FIELD32(0x00000200)
+#define RX_FILTER_CFG_DROP_ACK		FIELD32(0x00000400)
+#define RX_FILTER_CFG_DROP_CTS		FIELD32(0x00000800)
+#define RX_FILTER_CFG_DROP_RTS		FIELD32(0x00001000)
+#define RX_FILTER_CFG_DROP_PSPOLL	FIELD32(0x00002000)
+#define RX_FILTER_CFG_DROP_BA		FIELD32(0x00004000)
+#define RX_FILTER_CFG_DROP_BAR		FIELD32(0x00008000)
+#define RX_FILTER_CFG_DROP_CNTL		FIELD32(0x00010000)
+
+/*
+ * AUTO_RSP_CFG:
+ * AUTORESPONDER: 0: disable, 1: enable
+ * BAC_ACK_POLICY: 0:long, 1:short preamble
+ * CTS_40_MMODE: Response CTS 40MHz duplicate mode
+ * CTS_40_MREF: Response CTS 40MHz duplicate mode
+ * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
+ * DUAL_CTS_EN: Power bit value in control frame
+ * ACK_CTS_PSM_BIT:Power bit value in control frame
+ */
+#define AUTO_RSP_CFG			0x1404
+#define AUTO_RSP_CFG_AUTORESPONDER	FIELD32(0x00000001)
+#define AUTO_RSP_CFG_BAC_ACK_POLICY	FIELD32(0x00000002)
+#define AUTO_RSP_CFG_CTS_40_MMODE	FIELD32(0x00000004)
+#define AUTO_RSP_CFG_CTS_40_MREF	FIELD32(0x00000008)
+#define AUTO_RSP_CFG_AR_PREAMBLE	FIELD32(0x00000010)
+#define AUTO_RSP_CFG_DUAL_CTS_EN	FIELD32(0x00000040)
+#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT	FIELD32(0x00000080)
+
+/*
+ * LEGACY_BASIC_RATE:
+ */
+#define LEGACY_BASIC_RATE		0x1408
+
+/*
+ * HT_BASIC_RATE:
+ */
+#define HT_BASIC_RATE			0x140c
+
+/*
+ * HT_CTRL_CFG:
+ */
+#define HT_CTRL_CFG			0x1410
+
+/*
+ * SIFS_COST_CFG:
+ */
+#define SIFS_COST_CFG			0x1414
+
+/*
+ * RX_PARSER_CFG:
+ * Set NAV for all received frames
+ */
+#define RX_PARSER_CFG			0x1418
+
+/*
+ * TX_SEC_CNT0:
+ */
+#define TX_SEC_CNT0			0x1500
+
+/*
+ * RX_SEC_CNT0:
+ */
+#define RX_SEC_CNT0			0x1504
+
+/*
+ * CCMP_FC_MUTE:
+ */
+#define CCMP_FC_MUTE			0x1508
+
+/*
+ * TXOP_HLDR_ADDR0:
+ */
+#define TXOP_HLDR_ADDR0			0x1600
+
+/*
+ * TXOP_HLDR_ADDR1:
+ */
+#define TXOP_HLDR_ADDR1			0x1604
+
+/*
+ * TXOP_HLDR_ET:
+ */
+#define TXOP_HLDR_ET			0x1608
+
+/*
+ * QOS_CFPOLL_RA_DW0:
+ */
+#define QOS_CFPOLL_RA_DW0		0x160c
+
+/*
+ * QOS_CFPOLL_RA_DW1:
+ */
+#define QOS_CFPOLL_RA_DW1		0x1610
+
+/*
+ * QOS_CFPOLL_QC:
+ */
+#define QOS_CFPOLL_QC			0x1614
+
+/*
+ * RX_STA_CNT0: RX PLCP error count & RX CRC error count
+ */
+#define RX_STA_CNT0			0x1700
+#define RX_STA_CNT0_CRC_ERR		FIELD32(0x0000ffff)
+#define RX_STA_CNT0_PHY_ERR		FIELD32(0xffff0000)
+
+/*
+ * RX_STA_CNT1: RX False CCA count & RX LONG frame count
+ */
+#define RX_STA_CNT1			0x1704
+#define RX_STA_CNT1_FALSE_CCA		FIELD32(0x0000ffff)
+#define RX_STA_CNT1_PLCP_ERR		FIELD32(0xffff0000)
+
+/*
+ * RX_STA_CNT2:
+ */
+#define RX_STA_CNT2			0x1708
+#define RX_STA_CNT2_RX_DUPLI_COUNT	FIELD32(0x0000ffff)
+#define RX_STA_CNT2_RX_FIFO_OVERFLOW	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT0: TX Beacon count
+ */
+#define TX_STA_CNT0			0x170c
+#define TX_STA_CNT0_TX_FAIL_COUNT	FIELD32(0x0000ffff)
+#define TX_STA_CNT0_TX_BEACON_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT1: TX tx count
+ */
+#define TX_STA_CNT1			0x1710
+#define TX_STA_CNT1_TX_SUCCESS		FIELD32(0x0000ffff)
+#define TX_STA_CNT1_TX_RETRANSMIT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT2: TX tx count
+ */
+#define TX_STA_CNT2			0x1714
+#define TX_STA_CNT2_TX_ZERO_LEN_COUNT	FIELD32(0x0000ffff)
+#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_FIFO: TX Result for specific PID status fifo register
+ */
+#define TX_STA_FIFO			0x1718
+#define TX_STA_FIFO_VALID		FIELD32(0x00000001)
+#define TX_STA_FIFO_PID_TYPE		FIELD32(0x0000001e)
+#define TX_STA_FIFO_TX_SUCCESS		FIELD32(0x00000020)
+#define TX_STA_FIFO_TX_AGGRE		FIELD32(0x00000040)
+#define TX_STA_FIFO_TX_ACK_REQUIRED	FIELD32(0x00000080)
+#define TX_STA_FIFO_WCID		FIELD32(0x0000ff00)
+#define TX_STA_FIFO_SUCCESS_RATE	FIELD32(0xffff0000)
+#define TX_STA_FIFO_MCS			FIELD32(0x007f0000)
+#define TX_STA_FIFO_PHYMODE		FIELD32(0xc0000000)
+
+/*
+ * TX_AGG_CNT: Debug counter
+ */
+#define TX_AGG_CNT			0x171c
+#define TX_AGG_CNT_NON_AGG_TX_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT_AGG_TX_COUNT		FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT0:
+ */
+#define TX_AGG_CNT0			0x1720
+#define TX_AGG_CNT0_AGG_SIZE_1_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT0_AGG_SIZE_2_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT1:
+ */
+#define TX_AGG_CNT1			0x1724
+#define TX_AGG_CNT1_AGG_SIZE_3_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT1_AGG_SIZE_4_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT2:
+ */
+#define TX_AGG_CNT2			0x1728
+#define TX_AGG_CNT2_AGG_SIZE_5_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT2_AGG_SIZE_6_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT3:
+ */
+#define TX_AGG_CNT3			0x172c
+#define TX_AGG_CNT3_AGG_SIZE_7_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT3_AGG_SIZE_8_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT4:
+ */
+#define TX_AGG_CNT4			0x1730
+#define TX_AGG_CNT4_AGG_SIZE_9_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT4_AGG_SIZE_10_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT5:
+ */
+#define TX_AGG_CNT5			0x1734
+#define TX_AGG_CNT5_AGG_SIZE_11_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT5_AGG_SIZE_12_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT6:
+ */
+#define TX_AGG_CNT6			0x1738
+#define TX_AGG_CNT6_AGG_SIZE_13_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT6_AGG_SIZE_14_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT7:
+ */
+#define TX_AGG_CNT7			0x173c
+#define TX_AGG_CNT7_AGG_SIZE_15_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT7_AGG_SIZE_16_COUNT	FIELD32(0xffff0000)
+
+/*
+ * MPDU_DENSITY_CNT:
+ * TX_ZERO_DEL: TX zero length delimiter count
+ * RX_ZERO_DEL: RX zero length delimiter count
+ */
+#define MPDU_DENSITY_CNT		0x1740
+#define MPDU_DENSITY_CNT_TX_ZERO_DEL	FIELD32(0x0000ffff)
+#define MPDU_DENSITY_CNT_RX_ZERO_DEL	FIELD32(0xffff0000)
+
+/*
+ * Security key table memory.
+ * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
+ * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
+ * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
+ * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
+ * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry
+ * SHARED_KEY_MODE_BASE: 4-byte * 16-entry
+ */
+#define MAC_WCID_BASE			0x1800
+#define PAIRWISE_KEY_TABLE_BASE		0x4000
+#define MAC_IVEIV_TABLE_BASE		0x6000
+#define MAC_WCID_ATTRIBUTE_BASE		0x6800
+#define SHARED_KEY_TABLE_BASE		0x6c00
+#define SHARED_KEY_MODE_BASE		0x7000
+
+#define MAC_WCID_ENTRY(__idx) \
+	( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
+#define PAIRWISE_KEY_ENTRY(__idx) \
+	( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+#define MAC_IVEIV_ENTRY(__idx) \
+	( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
+#define MAC_WCID_ATTR_ENTRY(__idx) \
+	( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
+#define SHARED_KEY_ENTRY(__idx) \
+	( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+#define SHARED_KEY_MODE_ENTRY(__idx) \
+	( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
+
+struct mac_wcid_entry {
+	u8 mac[6];
+	u8 reserved[2];
+} __attribute__ ((packed));
+
+struct hw_key_entry {
+	u8 key[16];
+	u8 tx_mic[8];
+	u8 rx_mic[8];
+} __attribute__ ((packed));
+
+struct mac_iveiv_entry {
+	u8 iv[8];
+} __attribute__ ((packed));
+
+/*
+ * MAC_WCID_ATTRIBUTE:
+ */
+#define MAC_WCID_ATTRIBUTE_KEYTAB	FIELD32(0x00000001)
+#define MAC_WCID_ATTRIBUTE_CIPHER	FIELD32(0x0000000e)
+#define MAC_WCID_ATTRIBUTE_BSS_IDX	FIELD32(0x00000070)
+#define MAC_WCID_ATTRIBUTE_RX_WIUDF	FIELD32(0x00000380)
+
+/*
+ * SHARED_KEY_MODE:
+ */
+#define SHARED_KEY_MODE_BSS0_KEY0	FIELD32(0x00000007)
+#define SHARED_KEY_MODE_BSS0_KEY1	FIELD32(0x00000070)
+#define SHARED_KEY_MODE_BSS0_KEY2	FIELD32(0x00000700)
+#define SHARED_KEY_MODE_BSS0_KEY3	FIELD32(0x00007000)
+#define SHARED_KEY_MODE_BSS1_KEY0	FIELD32(0x00070000)
+#define SHARED_KEY_MODE_BSS1_KEY1	FIELD32(0x00700000)
+#define SHARED_KEY_MODE_BSS1_KEY2	FIELD32(0x07000000)
+#define SHARED_KEY_MODE_BSS1_KEY3	FIELD32(0x70000000)
+
+/*
+ * HOST-MCU communication
+ */
+
+/*
+ * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
+ */
+#define H2M_MAILBOX_CSR			0x7010
+#define H2M_MAILBOX_CSR_ARG0		FIELD32(0x000000ff)
+#define H2M_MAILBOX_CSR_ARG1		FIELD32(0x0000ff00)
+#define H2M_MAILBOX_CSR_CMD_TOKEN	FIELD32(0x00ff0000)
+#define H2M_MAILBOX_CSR_OWNER		FIELD32(0xff000000)
+
+/*
+ * H2M_MAILBOX_CID:
+ */
+#define H2M_MAILBOX_CID			0x7014
+#define H2M_MAILBOX_CID_CMD0		FIELD32(0x000000ff)
+#define H2M_MAILBOX_CID_CMD1		FIELD32(0x0000ff00)
+#define H2M_MAILBOX_CID_CMD2		FIELD32(0x00ff0000)
+#define H2M_MAILBOX_CID_CMD3		FIELD32(0xff000000)
+
+/*
+ * H2M_MAILBOX_STATUS:
+ */
+#define H2M_MAILBOX_STATUS		0x701c
+
+/*
+ * H2M_INT_SRC:
+ */
+#define H2M_INT_SRC			0x7024
+
+/*
+ * H2M_BBP_AGENT:
+ */
+#define H2M_BBP_AGENT			0x7028
+
+/*
+ * MCU_LEDCS: LED control for MCU Mailbox.
+ */
+#define MCU_LEDCS_LED_MODE		FIELD8(0x1f)
+#define MCU_LEDCS_POLARITY		FIELD8(0x01)
+
+/*
+ * HW_CS_CTS_BASE:
+ * Carrier-sense CTS frame base address.
+ * It's where mac stores carrier-sense frame for carrier-sense function.
+ */
+#define HW_CS_CTS_BASE			0x7700
+
+/*
+ * HW_DFS_CTS_BASE:
+ * DFS CTS frame base address. It's where mac stores CTS frame for DFS.
+ */
+#define HW_DFS_CTS_BASE			0x7780
+
+/*
+ * TXRX control registers - base address 0x3000
+ */
+
+/*
+ * TXRX_CSR1:
+ * rt2860b  UNKNOWN reg use R/O Reg Addr 0x77d0 first..
+ */
+#define TXRX_CSR1			0x77d0
+
+/*
+ * HW_DEBUG_SETTING_BASE:
+ * since NULL frame won't be that long (256 byte)
+ * We steal 16 tail bytes to save debugging settings
+ */
+#define HW_DEBUG_SETTING_BASE		0x77f0
+#define HW_DEBUG_SETTING_BASE2		0x7770
+
+/*
+ * HW_BEACON_BASE
+ * In order to support maximum 8 MBSS and its maximum length
+ * is 512 bytes for each beacon
+ * Three section discontinue memory segments will be used.
+ * 1. The original region for BCN 0~3
+ * 2. Extract memory from FCE table for BCN 4~5
+ * 3. Extract memory from Pair-wise key table for BCN 6~7
+ *    It occupied those memory of wcid 238~253 for BCN 6
+ *    and wcid 222~237 for BCN 7
+ *
+ * IMPORTANT NOTE: Not sure why legacy driver does this,
+ * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
+ */
+#define HW_BEACON_BASE0			0x7800
+#define HW_BEACON_BASE1			0x7a00
+#define HW_BEACON_BASE2			0x7c00
+#define HW_BEACON_BASE3			0x7e00
+#define HW_BEACON_BASE4			0x7200
+#define HW_BEACON_BASE5			0x7400
+#define HW_BEACON_BASE6			0x5dc0
+#define HW_BEACON_BASE7			0x5bc0
+
+#define HW_BEACON_OFFSET(__index) \
+	( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
+	  (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
+	  (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
+
+/*
+ * BBP registers.
+ * The wordsize of the BBP is 8 bits.
+ */
+
+/*
+ * BBP 1: TX Antenna
+ */
+#define BBP1_TX_POWER			FIELD8(0x07)
+#define BBP1_TX_ANTENNA			FIELD8(0x18)
+
+/*
+ * BBP 3: RX Antenna
+ */
+#define BBP3_RX_ANTENNA			FIELD8(0x18)
+#define BBP3_HT40_PLUS			FIELD8(0x20)
+
+/*
+ * BBP 4: Bandwidth
+ */
+#define BBP4_TX_BF			FIELD8(0x01)
+#define BBP4_BANDWIDTH			FIELD8(0x18)
+
+/*
+ * RFCSR registers
+ * The wordsize of the RFCSR is 8 bits.
+ */
+
+/*
+ * RFCSR 6:
+ */
+#define RFCSR6_R			FIELD8(0x03)
+
+/*
+ * RFCSR 7:
+ */
+#define RFCSR7_RF_TUNING		FIELD8(0x01)
+
+/*
+ * RFCSR 12:
+ */
+#define RFCSR12_TX_POWER		FIELD8(0x1f)
+
+/*
+ * RFCSR 22:
+ */
+#define RFCSR22_BASEBAND_LOOPBACK	FIELD8(0x01)
+
+/*
+ * RFCSR 23:
+ */
+#define RFCSR23_FREQ_OFFSET		FIELD8(0x7f)
+
+/*
+ * RFCSR 30:
+ */
+#define RFCSR30_RF_CALIBRATION		FIELD8(0x80)
+
+/*
+ * RF registers
+ */
+
+/*
+ * RF 2
+ */
+#define RF2_ANTENNA_RX2			FIELD32(0x00000040)
+#define RF2_ANTENNA_TX1			FIELD32(0x00004000)
+#define RF2_ANTENNA_RX1			FIELD32(0x00020000)
+
+/*
+ * RF 3
+ */
+#define RF3_TXPOWER_G			FIELD32(0x00003e00)
+#define RF3_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000200)
+#define RF3_TXPOWER_A			FIELD32(0x00003c00)
+
+/*
+ * RF 4
+ */
+#define RF4_TXPOWER_G			FIELD32(0x000007c0)
+#define RF4_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000040)
+#define RF4_TXPOWER_A			FIELD32(0x00000780)
+#define RF4_FREQ_OFFSET			FIELD32(0x001f8000)
+#define RF4_HT40			FIELD32(0x00200000)
+
+/*
+ * EEPROM content.
+ * The wordsize of the EEPROM is 16 bits.
+ */
+
+/*
+ * EEPROM Version
+ */
+#define EEPROM_VERSION			0x0001
+#define EEPROM_VERSION_FAE		FIELD16(0x00ff)
+#define EEPROM_VERSION_VERSION		FIELD16(0xff00)
+
+/*
+ * HW MAC address.
+ */
+#define EEPROM_MAC_ADDR_0		0x0002
+#define EEPROM_MAC_ADDR_BYTE0		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE1		FIELD16(0xff00)
+#define EEPROM_MAC_ADDR_1		0x0003
+#define EEPROM_MAC_ADDR_BYTE2		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE3		FIELD16(0xff00)
+#define EEPROM_MAC_ADDR_2		0x0004
+#define EEPROM_MAC_ADDR_BYTE4		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE5		FIELD16(0xff00)
+
+/*
+ * EEPROM ANTENNA config
+ * RXPATH: 1: 1R, 2: 2R, 3: 3R
+ * TXPATH: 1: 1T, 2: 2T
+ */
+#define	EEPROM_ANTENNA			0x001a
+#define EEPROM_ANTENNA_RXPATH		FIELD16(0x000f)
+#define EEPROM_ANTENNA_TXPATH		FIELD16(0x00f0)
+#define EEPROM_ANTENNA_RF_TYPE		FIELD16(0x0f00)
+
+/*
+ * EEPROM NIC config
+ * CARDBUS_ACCEL: 0 - enable, 1 - disable
+ */
+#define	EEPROM_NIC			0x001b
+#define EEPROM_NIC_HW_RADIO		FIELD16(0x0001)
+#define EEPROM_NIC_DYNAMIC_TX_AGC	FIELD16(0x0002)
+#define EEPROM_NIC_EXTERNAL_LNA_BG	FIELD16(0x0004)
+#define EEPROM_NIC_EXTERNAL_LNA_A	FIELD16(0x0008)
+#define EEPROM_NIC_CARDBUS_ACCEL	FIELD16(0x0010)
+#define EEPROM_NIC_BW40M_SB_BG		FIELD16(0x0020)
+#define EEPROM_NIC_BW40M_SB_A		FIELD16(0x0040)
+#define EEPROM_NIC_WPS_PBC		FIELD16(0x0080)
+#define EEPROM_NIC_BW40M_BG		FIELD16(0x0100)
+#define EEPROM_NIC_BW40M_A		FIELD16(0x0200)
+
+/*
+ * EEPROM frequency
+ */
+#define	EEPROM_FREQ			0x001d
+#define EEPROM_FREQ_OFFSET		FIELD16(0x00ff)
+#define EEPROM_FREQ_LED_MODE		FIELD16(0x7f00)
+#define EEPROM_FREQ_LED_POLARITY	FIELD16(0x1000)
+
+/*
+ * EEPROM LED
+ * POLARITY_RDY_G: Polarity RDY_G setting.
+ * POLARITY_RDY_A: Polarity RDY_A setting.
+ * POLARITY_ACT: Polarity ACT setting.
+ * POLARITY_GPIO_0: Polarity GPIO0 setting.
+ * POLARITY_GPIO_1: Polarity GPIO1 setting.
+ * POLARITY_GPIO_2: Polarity GPIO2 setting.
+ * POLARITY_GPIO_3: Polarity GPIO3 setting.
+ * POLARITY_GPIO_4: Polarity GPIO4 setting.
+ * LED_MODE: Led mode.
+ */
+#define EEPROM_LED1			0x001e
+#define EEPROM_LED2			0x001f
+#define EEPROM_LED3			0x0020
+#define EEPROM_LED_POLARITY_RDY_BG	FIELD16(0x0001)
+#define EEPROM_LED_POLARITY_RDY_A	FIELD16(0x0002)
+#define EEPROM_LED_POLARITY_ACT		FIELD16(0x0004)
+#define EEPROM_LED_POLARITY_GPIO_0	FIELD16(0x0008)
+#define EEPROM_LED_POLARITY_GPIO_1	FIELD16(0x0010)
+#define EEPROM_LED_POLARITY_GPIO_2	FIELD16(0x0020)
+#define EEPROM_LED_POLARITY_GPIO_3	FIELD16(0x0040)
+#define EEPROM_LED_POLARITY_GPIO_4	FIELD16(0x0080)
+#define EEPROM_LED_LED_MODE		FIELD16(0x1f00)
+
+/*
+ * EEPROM LNA
+ */
+#define EEPROM_LNA			0x0022
+#define EEPROM_LNA_BG			FIELD16(0x00ff)
+#define EEPROM_LNA_A0			FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI BG offset
+ */
+#define EEPROM_RSSI_BG			0x0023
+#define EEPROM_RSSI_BG_OFFSET0		FIELD16(0x00ff)
+#define EEPROM_RSSI_BG_OFFSET1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI BG2 offset
+ */
+#define EEPROM_RSSI_BG2			0x0024
+#define EEPROM_RSSI_BG2_OFFSET2		FIELD16(0x00ff)
+#define EEPROM_RSSI_BG2_LNA_A1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI A offset
+ */
+#define EEPROM_RSSI_A			0x0025
+#define EEPROM_RSSI_A_OFFSET0		FIELD16(0x00ff)
+#define EEPROM_RSSI_A_OFFSET1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI A2 offset
+ */
+#define EEPROM_RSSI_A2			0x0026
+#define EEPROM_RSSI_A2_OFFSET2		FIELD16(0x00ff)
+#define EEPROM_RSSI_A2_LNA_A2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
+ *	This is delta in 40MHZ.
+ * VALUE: Tx Power dalta value (MAX=4)
+ * TYPE: 1: Plus the delta value, 0: minus the delta value
+ * TXPOWER: Enable:
+ */
+#define EEPROM_TXPOWER_DELTA		0x0028
+#define EEPROM_TXPOWER_DELTA_VALUE	FIELD16(0x003f)
+#define EEPROM_TXPOWER_DELTA_TYPE	FIELD16(0x0040)
+#define EEPROM_TXPOWER_DELTA_TXPOWER	FIELD16(0x0080)
+
+/*
+ * EEPROM TXPOWER 802.11BG
+ */
+#define	EEPROM_TXPOWER_BG1		0x0029
+#define	EEPROM_TXPOWER_BG2		0x0030
+#define EEPROM_TXPOWER_BG_SIZE		7
+#define EEPROM_TXPOWER_BG_1		FIELD16(0x00ff)
+#define EEPROM_TXPOWER_BG_2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXPOWER 802.11A
+ */
+#define EEPROM_TXPOWER_A1		0x003c
+#define EEPROM_TXPOWER_A2		0x0053
+#define EEPROM_TXPOWER_A_SIZE		6
+#define EEPROM_TXPOWER_A_1		FIELD16(0x00ff)
+#define EEPROM_TXPOWER_A_2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXpower byrate: 20MHZ power
+ */
+#define EEPROM_TXPOWER_BYRATE		0x006f
+
+/*
+ * EEPROM BBP.
+ */
+#define	EEPROM_BBP_START		0x0078
+#define EEPROM_BBP_SIZE			16
+#define EEPROM_BBP_VALUE		FIELD16(0x00ff)
+#define EEPROM_BBP_REG_ID		FIELD16(0xff00)
+
+/*
+ * MCU mailbox commands.
+ */
+#define MCU_SLEEP			0x30
+#define MCU_WAKEUP			0x31
+#define MCU_RADIO_OFF			0x35
+#define MCU_CURRENT			0x36
+#define MCU_LED				0x50
+#define MCU_LED_STRENGTH		0x51
+#define MCU_LED_1			0x52
+#define MCU_LED_2			0x53
+#define MCU_LED_3			0x54
+#define MCU_RADAR			0x60
+#define MCU_BOOT_SIGNAL			0x72
+#define MCU_BBP_SIGNAL			0x80
+#define MCU_POWER_SAVE			0x83
+
+/*
+ * MCU mailbox tokens
+ */
+#define TOKEN_WAKUP			3
+
+/*
+ * DMA descriptor defines.
+ */
+#define TXWI_DESC_SIZE			( 4 * sizeof(__le32) )
+#define RXWI_DESC_SIZE			( 4 * sizeof(__le32) )
+
+/*
+ * TX WI structure
+ */
+
+/*
+ * Word0
+ * FRAG: 1 To inform TKIP engine this is a fragment.
+ * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
+ * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
+ * BW: Channel bandwidth 20MHz or 40 MHz
+ * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
+ */
+#define TXWI_W0_FRAG			FIELD32(0x00000001)
+#define TXWI_W0_MIMO_PS			FIELD32(0x00000002)
+#define TXWI_W0_CF_ACK			FIELD32(0x00000004)
+#define TXWI_W0_TS			FIELD32(0x00000008)
+#define TXWI_W0_AMPDU			FIELD32(0x00000010)
+#define TXWI_W0_MPDU_DENSITY		FIELD32(0x000000e0)
+#define TXWI_W0_TX_OP			FIELD32(0x00000300)
+#define TXWI_W0_MCS			FIELD32(0x007f0000)
+#define TXWI_W0_BW			FIELD32(0x00800000)
+#define TXWI_W0_SHORT_GI		FIELD32(0x01000000)
+#define TXWI_W0_STBC			FIELD32(0x06000000)
+#define TXWI_W0_IFS			FIELD32(0x08000000)
+#define TXWI_W0_PHYMODE			FIELD32(0xc0000000)
+
+/*
+ * Word1
+ */
+#define TXWI_W1_ACK			FIELD32(0x00000001)
+#define TXWI_W1_NSEQ			FIELD32(0x00000002)
+#define TXWI_W1_BW_WIN_SIZE		FIELD32(0x000000fc)
+#define TXWI_W1_WIRELESS_CLI_ID		FIELD32(0x0000ff00)
+#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
+#define TXWI_W1_PACKETID		FIELD32(0xf0000000)
+
+/*
+ * Word2
+ */
+#define TXWI_W2_IV			FIELD32(0xffffffff)
+
+/*
+ * Word3
+ */
+#define TXWI_W3_EIV			FIELD32(0xffffffff)
+
+/*
+ * RX WI structure
+ */
+
+/*
+ * Word0
+ */
+#define RXWI_W0_WIRELESS_CLI_ID		FIELD32(0x000000ff)
+#define RXWI_W0_KEY_INDEX		FIELD32(0x00000300)
+#define RXWI_W0_BSSID			FIELD32(0x00001c00)
+#define RXWI_W0_UDF			FIELD32(0x0000e000)
+#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
+#define RXWI_W0_TID			FIELD32(0xf0000000)
+
+/*
+ * Word1
+ */
+#define RXWI_W1_FRAG			FIELD32(0x0000000f)
+#define RXWI_W1_SEQUENCE		FIELD32(0x0000fff0)
+#define RXWI_W1_MCS			FIELD32(0x007f0000)
+#define RXWI_W1_BW			FIELD32(0x00800000)
+#define RXWI_W1_SHORT_GI		FIELD32(0x01000000)
+#define RXWI_W1_STBC			FIELD32(0x06000000)
+#define RXWI_W1_PHYMODE			FIELD32(0xc0000000)
+
+/*
+ * Word2
+ */
+#define RXWI_W2_RSSI0			FIELD32(0x000000ff)
+#define RXWI_W2_RSSI1			FIELD32(0x0000ff00)
+#define RXWI_W2_RSSI2			FIELD32(0x00ff0000)
+
+/*
+ * Word3
+ */
+#define RXWI_W3_SNR0			FIELD32(0x000000ff)
+#define RXWI_W3_SNR1			FIELD32(0x0000ff00)
+
+/*
+ * Macros for converting txpower from EEPROM to mac80211 value
+ * and from mac80211 value to register value.
+ */
+#define MIN_G_TXPOWER	0
+#define MIN_A_TXPOWER	-7
+#define MAX_G_TXPOWER	31
+#define MAX_A_TXPOWER	15
+#define DEFAULT_TXPOWER	5
+
+#define TXPOWER_G_FROM_DEV(__txpower) \
+	((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_G_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
+
+#define TXPOWER_A_FROM_DEV(__txpower) \
+	((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_A_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
+
+#endif /* RT2800_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
new file mode 100644
index 00000000000..5c7d74a6f16
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -0,0 +1,1817 @@
+/*
+	Copyright (C) 2009 Bartlomiej Zolnierkiewicz
+
+	Based on the original rt2800pci.c and rt2800usb.c:
+
+	  Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	  <http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2800lib
+	Abstract: rt2800 generic device routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "rt2x00.h"
+#ifdef CONFIG_RT2800USB
+#include "rt2x00usb.h"
+#endif
+#include "rt2800lib.h"
+#include "rt2800.h"
+#include "rt2800usb.h"
+
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("rt2800 library");
+MODULE_LICENSE("GPL");
+
+/*
+ * Register access.
+ * All access to the CSR registers will go through the methods
+ * rt2800_register_read and rt2800_register_write.
+ * BBP and RF register require indirect register access,
+ * and use the CSR registers BBPCSR and RFCSR to achieve this.
+ * These indirect registers work with busy bits,
+ * and we will try maximal REGISTER_BUSY_COUNT times to access
+ * the register while taking a REGISTER_BUSY_DELAY us delay
+ * between each attampt. When the busy bit is still set at that time,
+ * the access attempt is considered to have failed,
+ * and we will print an error.
+ * The _lock versions must be used if you already hold the csr_mutex
+ */
+#define WAIT_FOR_BBP(__dev, __reg) \
+	rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RFCSR(__dev, __reg) \
+	rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+	rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+#define WAIT_FOR_MCU(__dev, __reg) \
+	rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \
+			    H2M_MAILBOX_CSR_OWNER, (__reg))
+
+static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
+			     const unsigned int word, const u8 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
+		if (rt2x00_intf_is_pci(rt2x00dev))
+			rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
+
+		rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev,
+			    const unsigned int word, u8 *value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
+	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
+		if (rt2x00_intf_is_pci(rt2x00dev))
+			rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
+
+		rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+
+		WAIT_FOR_BBP(rt2x00dev, &reg);
+	}
+
+	*value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev,
+			       const unsigned int word, const u8 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RFCSR becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+		rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
+			      const unsigned int word, u8 *value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RFCSR becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
+	 */
+	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+		rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
+
+		WAIT_FOR_RFCSR(rt2x00dev, &reg);
+	}
+
+	*value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
+			    const unsigned int word, const u32 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RF becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RF(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
+
+		rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
+		rt2x00_rf_write(rt2x00dev, word, value);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
+			const u8 command, const u8 token,
+			const u8 arg0, const u8 arg1)
+{
+	u32 reg;
+
+	if (rt2x00_intf_is_pci(rt2x00dev)) {
+		/*
+		* RT2880 and RT3052 don't support MCU requests.
+		*/
+		if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
+		    rt2x00_rt(&rt2x00dev->chip, RT3052))
+			return;
+	}
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the MCU becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
+		rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
+
+		reg = 0;
+		rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
+		rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+EXPORT_SYMBOL_GPL(rt2800_mcu_request);
+
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+const struct rt2x00debug rt2800_rt2x00debug = {
+	.owner	= THIS_MODULE,
+	.csr	= {
+		.read		= rt2800_register_read,
+		.write		= rt2800_register_write,
+		.flags		= RT2X00DEBUGFS_OFFSET,
+		.word_base	= CSR_REG_BASE,
+		.word_size	= sizeof(u32),
+		.word_count	= CSR_REG_SIZE / sizeof(u32),
+	},
+	.eeprom	= {
+		.read		= rt2x00_eeprom_read,
+		.write		= rt2x00_eeprom_write,
+		.word_base	= EEPROM_BASE,
+		.word_size	= sizeof(u16),
+		.word_count	= EEPROM_SIZE / sizeof(u16),
+	},
+	.bbp	= {
+		.read		= rt2800_bbp_read,
+		.write		= rt2800_bbp_write,
+		.word_base	= BBP_BASE,
+		.word_size	= sizeof(u8),
+		.word_count	= BBP_SIZE / sizeof(u8),
+	},
+	.rf	= {
+		.read		= rt2x00_rf_read,
+		.write		= rt2800_rf_write,
+		.word_base	= RF_BASE,
+		.word_size	= sizeof(u32),
+		.word_count	= RF_SIZE / sizeof(u32),
+	},
+};
+EXPORT_SYMBOL_GPL(rt2800_rt2x00debug);
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+
+int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+	return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
+}
+EXPORT_SYMBOL_GPL(rt2800_rfkill_poll);
+
+#ifdef CONFIG_RT2X00_LIB_LEDS
+static void rt2800_brightness_set(struct led_classdev *led_cdev,
+				  enum led_brightness brightness)
+{
+	struct rt2x00_led *led =
+	    container_of(led_cdev, struct rt2x00_led, led_dev);
+	unsigned int enabled = brightness != LED_OFF;
+	unsigned int bg_mode =
+	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+	unsigned int polarity =
+		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+				   EEPROM_FREQ_LED_POLARITY);
+	unsigned int ledmode =
+		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+				   EEPROM_FREQ_LED_MODE);
+
+	if (led->type == LED_TYPE_RADIO) {
+		rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+				      enabled ? 0x20 : 0);
+	} else if (led->type == LED_TYPE_ASSOC) {
+		rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+				      enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
+	} else if (led->type == LED_TYPE_QUALITY) {
+		/*
+		 * The brightness is divided into 6 levels (0 - 5),
+		 * The specs tell us the following levels:
+		 *	0, 1 ,3, 7, 15, 31
+		 * to determine the level in a simple way we can simply
+		 * work with bitshifting:
+		 *	(1 << level) - 1
+		 */
+		rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+				      (1 << brightness / (LED_FULL / 6)) - 1,
+				      polarity);
+	}
+}
+
+static int rt2800_blink_set(struct led_classdev *led_cdev,
+			    unsigned long *delay_on, unsigned long *delay_off)
+{
+	struct rt2x00_led *led =
+	    container_of(led_cdev, struct rt2x00_led, led_dev);
+	u32 reg;
+
+	rt2800_register_read(led->rt2x00dev, LED_CFG, &reg);
+	rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, *delay_on);
+	rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
+	rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
+	rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
+	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
+	rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
+	rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
+	rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
+
+	return 0;
+}
+
+void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
+		     struct rt2x00_led *led, enum led_type type)
+{
+	led->rt2x00dev = rt2x00dev;
+	led->type = type;
+	led->led_dev.brightness_set = rt2800_brightness_set;
+	led->led_dev.blink_set = rt2800_blink_set;
+	led->flags = LED_INITIALIZED;
+}
+EXPORT_SYMBOL_GPL(rt2800_init_led);
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+/*
+ * Configuration handlers.
+ */
+static void rt2800_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
+				    struct rt2x00lib_crypto *crypto,
+				    struct ieee80211_key_conf *key)
+{
+	struct mac_wcid_entry wcid_entry;
+	struct mac_iveiv_entry iveiv_entry;
+	u32 offset;
+	u32 reg;
+
+	offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
+
+	rt2800_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
+			   !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
+			   (crypto->cmd == SET_KEY) * crypto->cipher);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
+			   (crypto->cmd == SET_KEY) * crypto->bssidx);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
+	rt2800_register_write(rt2x00dev, offset, reg);
+
+	offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
+
+	memset(&iveiv_entry, 0, sizeof(iveiv_entry));
+	if ((crypto->cipher == CIPHER_TKIP) ||
+	    (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
+	    (crypto->cipher == CIPHER_AES))
+		iveiv_entry.iv[3] |= 0x20;
+	iveiv_entry.iv[3] |= key->keyidx << 6;
+	rt2800_register_multiwrite(rt2x00dev, offset,
+				      &iveiv_entry, sizeof(iveiv_entry));
+
+	offset = MAC_WCID_ENTRY(key->hw_key_idx);
+
+	memset(&wcid_entry, 0, sizeof(wcid_entry));
+	if (crypto->cmd == SET_KEY)
+		memcpy(&wcid_entry, crypto->address, ETH_ALEN);
+	rt2800_register_multiwrite(rt2x00dev, offset,
+				      &wcid_entry, sizeof(wcid_entry));
+}
+
+int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
+			     struct rt2x00lib_crypto *crypto,
+			     struct ieee80211_key_conf *key)
+{
+	struct hw_key_entry key_entry;
+	struct rt2x00_field32 field;
+	u32 offset;
+	u32 reg;
+
+	if (crypto->cmd == SET_KEY) {
+		key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
+
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		offset = SHARED_KEY_ENTRY(key->hw_key_idx);
+		rt2800_register_multiwrite(rt2x00dev, offset,
+					      &key_entry, sizeof(key_entry));
+	}
+
+	/*
+	 * The cipher types are stored over multiple registers
+	 * starting with SHARED_KEY_MODE_BASE each word will have
+	 * 32 bits and contains the cipher types for 2 bssidx each.
+	 * Using the correct defines correctly will cause overhead,
+	 * so just calculate the correct offset.
+	 */
+	field.bit_offset = 4 * (key->hw_key_idx % 8);
+	field.bit_mask = 0x7 << field.bit_offset;
+
+	offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
+
+	rt2800_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, field,
+			   (crypto->cmd == SET_KEY) * crypto->cipher);
+	rt2800_register_write(rt2x00dev, offset, reg);
+
+	/*
+	 * Update WCID information
+	 */
+	rt2800_config_wcid_attr(rt2x00dev, crypto, key);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_config_shared_key);
+
+int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+			       struct rt2x00lib_crypto *crypto,
+			       struct ieee80211_key_conf *key)
+{
+	struct hw_key_entry key_entry;
+	u32 offset;
+
+	if (crypto->cmd == SET_KEY) {
+		/*
+		 * 1 pairwise key is possible per AID, this means that the AID
+		 * equals our hw_key_idx. Make sure the WCID starts _after_ the
+		 * last possible shared key entry.
+		 */
+		if (crypto->aid > (256 - 32))
+			return -ENOSPC;
+
+		key->hw_key_idx = 32 + crypto->aid;
+
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+		rt2800_register_multiwrite(rt2x00dev, offset,
+					      &key_entry, sizeof(key_entry));
+	}
+
+	/*
+	 * Update WCID information
+	 */
+	rt2800_config_wcid_attr(rt2x00dev, crypto, key);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key);
+
+void rt2800_config_filter(struct rt2x00_dev *rt2x00dev,
+			  const unsigned int filter_flags)
+{
+	u32 reg;
+
+	/*
+	 * Start configuration steps.
+	 * Note that the version error will always be dropped
+	 * and broadcast frames will always be accepted since
+	 * there is no filter for it at this time.
+	 */
+	rt2800_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
+			   !(filter_flags & FIF_FCSFAIL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
+			   !(filter_flags & FIF_PLCPFAIL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
+			   !(filter_flags & FIF_PROMISC_IN_BSS));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
+			   !(filter_flags & FIF_ALLMULTI));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
+			   !(filter_flags & FIF_PSPOLL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
+			   !(filter_flags & FIF_CONTROL));
+	rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg);
+}
+EXPORT_SYMBOL_GPL(rt2800_config_filter);
+
+void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
+			struct rt2x00intf_conf *conf, const unsigned int flags)
+{
+	unsigned int beacon_base;
+	u32 reg;
+
+	if (flags & CONFIG_UPDATE_TYPE) {
+		/*
+		 * Clear current synchronisation setup.
+		 * For the Beacon base registers we only need to clear
+		 * the first byte since that byte contains the VALID and OWNER
+		 * bits which (when set to 0) will invalidate the entire beacon.
+		 */
+		beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
+		rt2800_register_write(rt2x00dev, beacon_base, 0);
+
+		/*
+		 * Enable synchronisation.
+		 */
+		rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+		rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+	}
+
+	if (flags & CONFIG_UPDATE_MAC) {
+		reg = le32_to_cpu(conf->mac[1]);
+		rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
+		conf->mac[1] = cpu_to_le32(reg);
+
+		rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
+					      conf->mac, sizeof(conf->mac));
+	}
+
+	if (flags & CONFIG_UPDATE_BSSID) {
+		reg = le32_to_cpu(conf->bssid[1]);
+		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 0);
+		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
+		conf->bssid[1] = cpu_to_le32(reg);
+
+		rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
+					      conf->bssid, sizeof(conf->bssid));
+	}
+}
+EXPORT_SYMBOL_GPL(rt2800_config_intf);
+
+void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp)
+{
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
+	rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
+			   !!erp->short_preamble);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
+			   !!erp->short_preamble);
+	rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
+			   erp->cts_protection ? 2 : 0);
+	rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE,
+				 erp->basic_rates);
+	rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
+	rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
+	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
+	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
+	rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
+	rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+			   erp->beacon_int * 16);
+	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+}
+EXPORT_SYMBOL_GPL(rt2800_config_erp);
+
+void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
+{
+	u8 r1;
+	u8 r3;
+
+	rt2800_bbp_read(rt2x00dev, 1, &r1);
+	rt2800_bbp_read(rt2x00dev, 3, &r3);
+
+	/*
+	 * Configure the TX antenna.
+	 */
+	switch ((int)ant->tx) {
+	case 1:
+		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
+		if (rt2x00_intf_is_pci(rt2x00dev))
+			rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
+		break;
+	case 2:
+		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
+		break;
+	case 3:
+		/* Do nothing */
+		break;
+	}
+
+	/*
+	 * Configure the RX antenna.
+	 */
+	switch ((int)ant->rx) {
+	case 1:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
+		break;
+	case 2:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
+		break;
+	case 3:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
+		break;
+	}
+
+	rt2800_bbp_write(rt2x00dev, 3, r3);
+	rt2800_bbp_write(rt2x00dev, 1, r1);
+}
+EXPORT_SYMBOL_GPL(rt2800_config_ant);
+
+static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+				   struct rt2x00lib_conf *libconf)
+{
+	u16 eeprom;
+	short lna_gain;
+
+	if (libconf->rf.channel <= 14) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
+	} else if (libconf->rf.channel <= 64) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
+	} else if (libconf->rf.channel <= 128) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
+	} else {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
+	}
+
+	rt2x00dev->lna_gain = lna_gain;
+}
+
+static void rt2800_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
+				       struct ieee80211_conf *conf,
+				       struct rf_channel *rf,
+				       struct channel_info *info)
+{
+	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
+
+	if (rt2x00dev->default_ant.tx == 1)
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
+
+	if (rt2x00dev->default_ant.rx == 1) {
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+	} else if (rt2x00dev->default_ant.rx == 2)
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+
+	if (rf->channel > 14) {
+		/*
+		 * When TX power is below 0, we should increase it by 7 to
+		 * make it a positive value (Minumum value is -7).
+		 * However this means that values between 0 and 7 have
+		 * double meaning, and we should set a 7DBm boost flag.
+		 */
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
+				   (info->tx_power1 >= 0));
+
+		if (info->tx_power1 < 0)
+			info->tx_power1 += 7;
+
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
+				   TXPOWER_A_TO_DEV(info->tx_power1));
+
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
+				   (info->tx_power2 >= 0));
+
+		if (info->tx_power2 < 0)
+			info->tx_power2 += 7;
+
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
+				   TXPOWER_A_TO_DEV(info->tx_power2));
+	} else {
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
+				   TXPOWER_G_TO_DEV(info->tx_power1));
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
+				   TXPOWER_G_TO_DEV(info->tx_power2));
+	}
+
+	rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
+
+	rt2800_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+	rt2800_rf_write(rt2x00dev, 4, rf->rf4);
+
+	udelay(200);
+
+	rt2800_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
+	rt2800_rf_write(rt2x00dev, 4, rf->rf4);
+
+	udelay(200);
+
+	rt2800_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+	rt2800_rf_write(rt2x00dev, 4, rf->rf4);
+}
+
+static void rt2800_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
+				       struct ieee80211_conf *conf,
+				       struct rf_channel *rf,
+				       struct channel_info *info)
+{
+	u8 rfcsr;
+
+	rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
+	rt2800_rfcsr_write(rt2x00dev, 2, rf->rf3);
+
+	rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
+	rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
+
+	rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
+			  TXPOWER_G_TO_DEV(info->tx_power1));
+	rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
+
+	rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
+	rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
+
+	rt2800_rfcsr_write(rt2x00dev, 24,
+			      rt2x00dev->calibration[conf_is_ht40(conf)]);
+
+	rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
+	rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
+}
+
+static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
+				  struct ieee80211_conf *conf,
+				  struct rf_channel *rf,
+				  struct channel_info *info)
+{
+	u32 reg;
+	unsigned int tx_pin;
+	u8 bbp;
+
+	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+		rt2800_config_channel_rt2x(rt2x00dev, conf, rf, info);
+	else
+		rt2800_config_channel_rt3x(rt2x00dev, conf, rf, info);
+
+	/*
+	 * Change BBP settings
+	 */
+	rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+	rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+	rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+	rt2800_bbp_write(rt2x00dev, 86, 0);
+
+	if (rf->channel <= 14) {
+		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
+			rt2800_bbp_write(rt2x00dev, 82, 0x62);
+			rt2800_bbp_write(rt2x00dev, 75, 0x46);
+		} else {
+			rt2800_bbp_write(rt2x00dev, 82, 0x84);
+			rt2800_bbp_write(rt2x00dev, 75, 0x50);
+		}
+	} else {
+		rt2800_bbp_write(rt2x00dev, 82, 0xf2);
+
+		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+			rt2800_bbp_write(rt2x00dev, 75, 0x46);
+		else
+			rt2800_bbp_write(rt2x00dev, 75, 0x50);
+	}
+
+	rt2800_register_read(rt2x00dev, TX_BAND_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
+	rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
+	rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
+	rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg);
+
+	tx_pin = 0;
+
+	/* Turn on unused PA or LNA when not using 1T or 1R */
+	if (rt2x00dev->default_ant.tx != 1) {
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
+	}
+
+	/* Turn on unused PA or LNA when not using 1T or 1R */
+	if (rt2x00dev->default_ant.rx != 1) {
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
+	}
+
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
+
+	rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+
+	rt2800_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
+	rt2800_bbp_write(rt2x00dev, 4, bbp);
+
+	rt2800_bbp_read(rt2x00dev, 3, &bbp);
+	rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
+	rt2800_bbp_write(rt2x00dev, 3, bbp);
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+		if (conf_is_ht40(conf)) {
+			rt2800_bbp_write(rt2x00dev, 69, 0x1a);
+			rt2800_bbp_write(rt2x00dev, 70, 0x0a);
+			rt2800_bbp_write(rt2x00dev, 73, 0x16);
+		} else {
+			rt2800_bbp_write(rt2x00dev, 69, 0x16);
+			rt2800_bbp_write(rt2x00dev, 70, 0x08);
+			rt2800_bbp_write(rt2x00dev, 73, 0x11);
+		}
+	}
+
+	msleep(1);
+}
+
+static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
+				  const int txpower)
+{
+	u32 reg;
+	u32 value = TXPOWER_G_TO_DEV(txpower);
+	u8 r1;
+
+	rt2800_bbp_read(rt2x00dev, 1, &r1);
+	rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
+	rt2800_bbp_write(rt2x00dev, 1, r1);
+
+	rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_11MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_6MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
+	rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
+
+	rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_54MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS0, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
+	rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
+
+	rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS7, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS8, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
+	rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
+
+	rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS15, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN1, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
+	rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
+
+	rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
+	rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
+}
+
+static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
+				      struct rt2x00lib_conf *libconf)
+{
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, TX_RTY_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
+			   libconf->conf->short_frame_max_tx_count);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
+			   libconf->conf->long_frame_max_tx_count);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
+	rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
+}
+
+static void rt2800_config_ps(struct rt2x00_dev *rt2x00dev,
+			     struct rt2x00lib_conf *libconf)
+{
+	enum dev_state state =
+	    (libconf->conf->flags & IEEE80211_CONF_PS) ?
+		STATE_SLEEP : STATE_AWAKE;
+	u32 reg;
+
+	if (state == STATE_SLEEP) {
+		rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
+
+		rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
+				   libconf->conf->listen_interval - 1);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
+		rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+
+		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+	} else {
+		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+
+		rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
+		rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+	}
+}
+
+void rt2800_config(struct rt2x00_dev *rt2x00dev,
+		   struct rt2x00lib_conf *libconf,
+		   const unsigned int flags)
+{
+	/* Always recalculate LNA gain before changing configuration */
+	rt2800_config_lna_gain(rt2x00dev, libconf);
+
+	if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
+		rt2800_config_channel(rt2x00dev, libconf->conf,
+				      &libconf->rf, &libconf->channel);
+	if (flags & IEEE80211_CONF_CHANGE_POWER)
+		rt2800_config_txpower(rt2x00dev, libconf->conf->power_level);
+	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
+		rt2800_config_retry_limit(rt2x00dev, libconf);
+	if (flags & IEEE80211_CONF_CHANGE_PS)
+		rt2800_config_ps(rt2x00dev, libconf);
+}
+EXPORT_SYMBOL_GPL(rt2800_config);
+
+/*
+ * Link tuning
+ */
+void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
+{
+	u32 reg;
+
+	/*
+	 * Update FCS error count from register.
+	 */
+	rt2800_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+	qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
+}
+EXPORT_SYMBOL_GPL(rt2800_link_stats);
+
+static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
+{
+	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
+		if (rt2x00_intf_is_usb(rt2x00dev) &&
+		    rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
+			return 0x1c + (2 * rt2x00dev->lna_gain);
+		else
+			return 0x2e + rt2x00dev->lna_gain;
+	}
+
+	if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
+		return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
+	else
+		return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
+}
+
+static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev,
+				  struct link_qual *qual, u8 vgc_level)
+{
+	if (qual->vgc_level != vgc_level) {
+		rt2800_bbp_write(rt2x00dev, 66, vgc_level);
+		qual->vgc_level = vgc_level;
+		qual->vgc_level_reg = vgc_level;
+	}
+}
+
+void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
+{
+	rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev));
+}
+EXPORT_SYMBOL_GPL(rt2800_reset_tuner);
+
+void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
+		       const u32 count)
+{
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+		return;
+
+	/*
+	 * When RSSI is better then -80 increase VGC level with 0x10
+	 */
+	rt2800_set_vgc(rt2x00dev, qual,
+		       rt2800_get_default_vgc(rt2x00dev) +
+		       ((qual->rssi > -80) * 0x10));
+}
+EXPORT_SYMBOL_GPL(rt2800_link_tuner);
+
+/*
+ * Initialization functions.
+ */
+int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	unsigned int i;
+
+	if (rt2x00_intf_is_usb(rt2x00dev)) {
+		/*
+		 * Wait untill BBP and RF are ready.
+		 */
+		for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+			rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
+			if (reg && reg != ~0)
+				break;
+			msleep(1);
+		}
+
+		if (i == REGISTER_BUSY_COUNT) {
+			ERROR(rt2x00dev, "Unstable hardware.\n");
+			return -EBUSY;
+		}
+
+		rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+		rt2800_register_write(rt2x00dev, PBF_SYS_CTRL,
+				      reg & ~0x00002000);
+	} else if (rt2x00_intf_is_pci(rt2x00dev))
+		rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	if (rt2x00_intf_is_usb(rt2x00dev)) {
+		rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
+#ifdef CONFIG_RT2800USB
+		rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
+					    USB_MODE_RESET, REGISTER_TIMEOUT);
+#endif
+	}
+
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+	rt2800_register_read(rt2x00dev, BCN_OFFSET0, &reg);
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
+	rt2800_register_write(rt2x00dev, BCN_OFFSET0, reg);
+
+	rt2800_register_read(rt2x00dev, BCN_OFFSET1, &reg);
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
+	rt2800_register_write(rt2x00dev, BCN_OFFSET1, reg);
+
+	rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
+	rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
+	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+	if (rt2x00_intf_is_usb(rt2x00dev) &&
+	    rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
+		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
+		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
+	} else {
+		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
+		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
+	}
+
+	rt2800_register_read(rt2x00dev, TX_LINK_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_MFB_ENABLE, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_MRQ_EN, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_RDG_EN, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_CF_ACK_EN, 1);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFS, 0);
+	rt2800_register_write(rt2x00dev, TX_LINK_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
+	rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
+	if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
+	    rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
+		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
+	else
+		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
+	rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg);
+
+	rt2800_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
+
+	rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AUTORESPONDER, 1);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MMODE, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MREF, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
+	rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_RATE, 8);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_RATE, 8);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+	rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+	rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+	if (rt2x00_intf_is_usb(rt2x00dev)) {
+		rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
+
+		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
+		rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+	}
+
+	rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
+	rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
+
+	rt2800_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
+			   IEEE80211_MAX_RTS_THRESHOLD);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_FBK_EN, 0);
+	rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
+	rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
+	rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+
+	/*
+	 * ASIC will keep garbage value after boot, clear encryption keys.
+	 */
+	for (i = 0; i < 4; i++)
+		rt2800_register_write(rt2x00dev,
+					 SHARED_KEY_MODE_ENTRY(i), 0);
+
+	for (i = 0; i < 256; i++) {
+		u32 wcid[2] = { 0xffffffff, 0x00ffffff };
+		rt2800_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
+					      wcid, sizeof(wcid));
+
+		rt2800_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
+		rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
+	}
+
+	/*
+	 * Clear all beacons
+	 * For the Beacon base registers we only need to clear
+	 * the first byte since that byte contains the VALID and OWNER
+	 * bits which (when set to 0) will invalidate the entire beacon.
+	 */
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
+
+	if (rt2x00_intf_is_usb(rt2x00dev)) {
+		rt2800_register_read(rt2x00dev, USB_CYC_CFG, &reg);
+		rt2x00_set_field32(&reg, USB_CYC_CFG_CLOCK_CYCLE, 30);
+		rt2800_register_write(rt2x00dev, USB_CYC_CFG, reg);
+	}
+
+	rt2800_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS0FBK, 0);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS1FBK, 0);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS2FBK, 1);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS3FBK, 2);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS4FBK, 3);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS5FBK, 4);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS6FBK, 5);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS7FBK, 6);
+	rt2800_register_write(rt2x00dev, HT_FBK_CFG0, reg);
+
+	rt2800_register_read(rt2x00dev, HT_FBK_CFG1, &reg);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS8FBK, 8);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS9FBK, 8);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS10FBK, 9);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS11FBK, 10);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS12FBK, 11);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS13FBK, 12);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS14FBK, 13);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS15FBK, 14);
+	rt2800_register_write(rt2x00dev, HT_FBK_CFG1, reg);
+
+	rt2800_register_read(rt2x00dev, LG_FBK_CFG0, &reg);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS0FBK, 8);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS1FBK, 8);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS2FBK, 9);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS3FBK, 10);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS4FBK, 11);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS5FBK, 12);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS6FBK, 13);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS7FBK, 14);
+	rt2800_register_write(rt2x00dev, LG_FBK_CFG0, reg);
+
+	rt2800_register_read(rt2x00dev, LG_FBK_CFG1, &reg);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS0FBK, 0);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS1FBK, 0);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS2FBK, 1);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS3FBK, 2);
+	rt2800_register_write(rt2x00dev, LG_FBK_CFG1, reg);
+
+	/*
+	 * We must clear the error counters.
+	 * These registers are cleared on read,
+	 * so we may pass a useless variable to store the value.
+	 */
+	rt2800_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+	rt2800_register_read(rt2x00dev, RX_STA_CNT1, &reg);
+	rt2800_register_read(rt2x00dev, RX_STA_CNT2, &reg);
+	rt2800_register_read(rt2x00dev, TX_STA_CNT0, &reg);
+	rt2800_register_read(rt2x00dev, TX_STA_CNT1, &reg);
+	rt2800_register_read(rt2x00dev, TX_STA_CNT2, &reg);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_init_registers);
+
+static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u32 reg;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, &reg);
+		if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
+			return 0;
+
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
+	return -EACCES;
+}
+
+static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u8 value;
+
+	/*
+	 * BBP was enabled after firmware was loaded,
+	 * but we need to reactivate it now.
+	 */
+	rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	msleep(1);
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800_bbp_read(rt2x00dev, 0, &value);
+		if ((value != 0xff) && (value != 0x00))
+			return 0;
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
+	return -EACCES;
+}
+
+int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u16 eeprom;
+	u8 reg_id;
+	u8 value;
+
+	if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev) ||
+		     rt2800_wait_bbp_ready(rt2x00dev)))
+		return -EACCES;
+
+	rt2800_bbp_write(rt2x00dev, 65, 0x2c);
+	rt2800_bbp_write(rt2x00dev, 66, 0x38);
+	rt2800_bbp_write(rt2x00dev, 69, 0x12);
+	rt2800_bbp_write(rt2x00dev, 70, 0x0a);
+	rt2800_bbp_write(rt2x00dev, 73, 0x10);
+	rt2800_bbp_write(rt2x00dev, 81, 0x37);
+	rt2800_bbp_write(rt2x00dev, 82, 0x62);
+	rt2800_bbp_write(rt2x00dev, 83, 0x6a);
+	rt2800_bbp_write(rt2x00dev, 84, 0x99);
+	rt2800_bbp_write(rt2x00dev, 86, 0x00);
+	rt2800_bbp_write(rt2x00dev, 91, 0x04);
+	rt2800_bbp_write(rt2x00dev, 92, 0x00);
+	rt2800_bbp_write(rt2x00dev, 103, 0x00);
+	rt2800_bbp_write(rt2x00dev, 105, 0x05);
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+		rt2800_bbp_write(rt2x00dev, 69, 0x16);
+		rt2800_bbp_write(rt2x00dev, 73, 0x12);
+	}
+
+	if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
+		rt2800_bbp_write(rt2x00dev, 84, 0x19);
+
+	if (rt2x00_intf_is_usb(rt2x00dev) &&
+	    rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+		rt2800_bbp_write(rt2x00dev, 70, 0x0a);
+		rt2800_bbp_write(rt2x00dev, 84, 0x99);
+		rt2800_bbp_write(rt2x00dev, 105, 0x05);
+	}
+
+	if (rt2x00_intf_is_pci(rt2x00dev) &&
+	    rt2x00_rt(&rt2x00dev->chip, RT3052)) {
+		rt2800_bbp_write(rt2x00dev, 31, 0x08);
+		rt2800_bbp_write(rt2x00dev, 78, 0x0e);
+		rt2800_bbp_write(rt2x00dev, 80, 0x08);
+	}
+
+	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+
+		if (eeprom != 0xffff && eeprom != 0x0000) {
+			reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
+			value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
+			rt2800_bbp_write(rt2x00dev, reg_id, value);
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_init_bbp);
+
+static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
+				bool bw40, u8 rfcsr24, u8 filter_target)
+{
+	unsigned int i;
+	u8 bbp;
+	u8 rfcsr;
+	u8 passband;
+	u8 stopband;
+	u8 overtuned = 0;
+
+	rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
+
+	rt2800_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
+	rt2800_bbp_write(rt2x00dev, 4, bbp);
+
+	rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
+	rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+	/*
+	 * Set power & frequency of passband test tone
+	 */
+	rt2800_bbp_write(rt2x00dev, 24, 0);
+
+	for (i = 0; i < 100; i++) {
+		rt2800_bbp_write(rt2x00dev, 25, 0x90);
+		msleep(1);
+
+		rt2800_bbp_read(rt2x00dev, 55, &passband);
+		if (passband)
+			break;
+	}
+
+	/*
+	 * Set power & frequency of stopband test tone
+	 */
+	rt2800_bbp_write(rt2x00dev, 24, 0x06);
+
+	for (i = 0; i < 100; i++) {
+		rt2800_bbp_write(rt2x00dev, 25, 0x90);
+		msleep(1);
+
+		rt2800_bbp_read(rt2x00dev, 55, &stopband);
+
+		if ((passband - stopband) <= filter_target) {
+			rfcsr24++;
+			overtuned += ((passband - stopband) == filter_target);
+		} else
+			break;
+
+		rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
+	}
+
+	rfcsr24 -= !!overtuned;
+
+	rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
+	return rfcsr24;
+}
+
+int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
+{
+	u8 rfcsr;
+	u8 bbp;
+
+	if (rt2x00_intf_is_usb(rt2x00dev) &&
+	    rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+		return 0;
+
+	if (rt2x00_intf_is_pci(rt2x00dev)) {
+		if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+		    !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
+		    !rt2x00_rf(&rt2x00dev->chip, RF3022))
+			return 0;
+	}
+
+	/*
+	 * Init RF calibration.
+	 */
+	rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+	msleep(1);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+	if (rt2x00_intf_is_usb(rt2x00dev)) {
+		rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
+		rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
+		rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
+		rt2800_rfcsr_write(rt2x00dev, 7, 0x70);
+		rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
+		rt2800_rfcsr_write(rt2x00dev, 10, 0x71);
+		rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
+		rt2800_rfcsr_write(rt2x00dev, 12, 0x7b);
+		rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
+		rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
+		rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
+		rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
+		rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
+		rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
+		rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
+		rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
+		rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
+		rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
+		rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
+		rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
+	} else if (rt2x00_intf_is_pci(rt2x00dev)) {
+		rt2800_rfcsr_write(rt2x00dev, 0, 0x50);
+		rt2800_rfcsr_write(rt2x00dev, 1, 0x01);
+		rt2800_rfcsr_write(rt2x00dev, 2, 0xf7);
+		rt2800_rfcsr_write(rt2x00dev, 3, 0x75);
+		rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
+		rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
+		rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
+		rt2800_rfcsr_write(rt2x00dev, 7, 0x50);
+		rt2800_rfcsr_write(rt2x00dev, 8, 0x39);
+		rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
+		rt2800_rfcsr_write(rt2x00dev, 10, 0x60);
+		rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
+		rt2800_rfcsr_write(rt2x00dev, 12, 0x75);
+		rt2800_rfcsr_write(rt2x00dev, 13, 0x75);
+		rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
+		rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
+		rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
+		rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
+		rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
+		rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
+		rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
+		rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
+		rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
+		rt2800_rfcsr_write(rt2x00dev, 23, 0x31);
+		rt2800_rfcsr_write(rt2x00dev, 24, 0x08);
+		rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
+		rt2800_rfcsr_write(rt2x00dev, 26, 0x25);
+		rt2800_rfcsr_write(rt2x00dev, 27, 0x23);
+		rt2800_rfcsr_write(rt2x00dev, 28, 0x13);
+		rt2800_rfcsr_write(rt2x00dev, 29, 0x83);
+	}
+
+	/*
+	 * Set RX Filter calibration for 20MHz and 40MHz
+	 */
+	rt2x00dev->calibration[0] =
+	    rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
+	rt2x00dev->calibration[1] =
+	    rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
+
+	/*
+	 * Set back to initial state
+	 */
+	rt2800_bbp_write(rt2x00dev, 24, 0);
+
+	rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
+	rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+	/*
+	 * set BBP back to BW20
+	 */
+	rt2800_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
+	rt2800_bbp_write(rt2x00dev, 4, bbp);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_init_rfcsr);
+
+/*
+ * IEEE80211 stack callback functions.
+ */
+static void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
+				u32 *iv32, u16 *iv16)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct mac_iveiv_entry iveiv_entry;
+	u32 offset;
+
+	offset = MAC_IVEIV_ENTRY(hw_key_idx);
+	rt2800_register_multiread(rt2x00dev, offset,
+				      &iveiv_entry, sizeof(iveiv_entry));
+
+	memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
+	memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
+}
+
+static int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	u32 reg;
+	bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
+
+	rt2800_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES, value);
+	rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, enabled);
+	rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, enabled);
+	rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, enabled);
+	rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, enabled);
+	rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, enabled);
+	rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, enabled);
+	rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+	return 0;
+}
+
+static int rt2800_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+			  const struct ieee80211_tx_queue_params *params)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct data_queue *queue;
+	struct rt2x00_field32 field;
+	int retval;
+	u32 reg;
+	u32 offset;
+
+	/*
+	 * First pass the configuration through rt2x00lib, that will
+	 * update the queue settings and validate the input. After that
+	 * we are free to update the registers based on the value
+	 * in the queue parameter.
+	 */
+	retval = rt2x00mac_conf_tx(hw, queue_idx, params);
+	if (retval)
+		return retval;
+
+	/*
+	 * We only need to perform additional register initialization
+	 * for WMM queues/
+	 */
+	if (queue_idx >= 4)
+		return 0;
+
+	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+
+	/* Update WMM TXOP register */
+	offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
+	field.bit_offset = (queue_idx & 1) * 16;
+	field.bit_mask = 0xffff << field.bit_offset;
+
+	rt2800_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, field, queue->txop);
+	rt2800_register_write(rt2x00dev, offset, reg);
+
+	/* Update WMM registers */
+	field.bit_offset = queue_idx * 4;
+	field.bit_mask = 0xf << field.bit_offset;
+
+	rt2800_register_read(rt2x00dev, WMM_AIFSN_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->aifs);
+	rt2800_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, WMM_CWMIN_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_min);
+	rt2800_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, WMM_CWMAX_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_max);
+	rt2800_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
+
+	/* Update EDCA registers */
+	offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
+
+	rt2800_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_TX_OP, queue->txop);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_AIFSN, queue->aifs);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMIN, queue->cw_min);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMAX, queue->cw_max);
+	rt2800_register_write(rt2x00dev, offset, reg);
+
+	return 0;
+}
+
+static u64 rt2800_get_tsf(struct ieee80211_hw *hw)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	u64 tsf;
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, TSF_TIMER_DW1, &reg);
+	tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
+	rt2800_register_read(rt2x00dev, TSF_TIMER_DW0, &reg);
+	tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
+
+	return tsf;
+}
+
+const struct ieee80211_ops rt2800_mac80211_ops = {
+	.tx			= rt2x00mac_tx,
+	.start			= rt2x00mac_start,
+	.stop			= rt2x00mac_stop,
+	.add_interface		= rt2x00mac_add_interface,
+	.remove_interface	= rt2x00mac_remove_interface,
+	.config			= rt2x00mac_config,
+	.configure_filter	= rt2x00mac_configure_filter,
+	.set_tim		= rt2x00mac_set_tim,
+	.set_key		= rt2x00mac_set_key,
+	.get_stats		= rt2x00mac_get_stats,
+	.get_tkip_seq		= rt2800_get_tkip_seq,
+	.set_rts_threshold	= rt2800_set_rts_threshold,
+	.bss_info_changed	= rt2x00mac_bss_info_changed,
+	.conf_tx		= rt2800_conf_tx,
+	.get_tx_stats		= rt2x00mac_get_tx_stats,
+	.get_tsf		= rt2800_get_tsf,
+	.rfkill_poll		= rt2x00mac_rfkill_poll,
+};
+EXPORT_SYMBOL_GPL(rt2800_mac80211_ops);
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
new file mode 100644
index 00000000000..5eea8fcba6c
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -0,0 +1,134 @@
+/*
+	Copyright (C) 2009 Bartlomiej Zolnierkiewicz
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef RT2800LIB_H
+#define RT2800LIB_H
+
+struct rt2800_ops {
+	void (*register_read)(struct rt2x00_dev *rt2x00dev,
+			      const unsigned int offset, u32 *value);
+	void (*register_write)(struct rt2x00_dev *rt2x00dev,
+			       const unsigned int offset, u32 value);
+	void (*register_write_lock)(struct rt2x00_dev *rt2x00dev,
+				    const unsigned int offset, u32 value);
+
+	void (*register_multiread)(struct rt2x00_dev *rt2x00dev,
+				   const unsigned int offset,
+				   void *value, const u32 length);
+	void (*register_multiwrite)(struct rt2x00_dev *rt2x00dev,
+				    const unsigned int offset,
+				    const void *value, const u32 length);
+
+	int (*regbusy_read)(struct rt2x00_dev *rt2x00dev,
+			    const unsigned int offset,
+			    const struct rt2x00_field32 field, u32 *reg);
+};
+
+static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev,
+					const unsigned int offset,
+					u32 *value)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+	rt2800ops->register_read(rt2x00dev, offset, value);
+}
+
+static inline void rt2800_register_write(struct rt2x00_dev *rt2x00dev,
+					 const unsigned int offset,
+					 u32 value)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+	rt2800ops->register_write(rt2x00dev, offset, value);
+}
+
+static inline void rt2800_register_write_lock(struct rt2x00_dev *rt2x00dev,
+					      const unsigned int offset,
+					      u32 value)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+	rt2800ops->register_write_lock(rt2x00dev, offset, value);
+}
+
+static inline void rt2800_register_multiread(struct rt2x00_dev *rt2x00dev,
+					     const unsigned int offset,
+					     void *value, const u32 length)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+	rt2800ops->register_multiread(rt2x00dev, offset, value, length);
+}
+
+static inline void rt2800_register_multiwrite(struct rt2x00_dev *rt2x00dev,
+					      const unsigned int offset,
+					      const void *value,
+					      const u32 length)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+	rt2800ops->register_multiwrite(rt2x00dev, offset, value, length);
+}
+
+static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev,
+				      const unsigned int offset,
+				      const struct rt2x00_field32 field,
+				      u32 *reg)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+	return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg);
+}
+
+void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
+			const u8 command, const u8 token,
+			const u8 arg0, const u8 arg1);
+
+extern const struct rt2x00debug rt2800_rt2x00debug;
+
+int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev);
+void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
+		     struct rt2x00_led *led, enum led_type type);
+int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
+			     struct rt2x00lib_crypto *crypto,
+			     struct ieee80211_key_conf *key);
+int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+			       struct rt2x00lib_crypto *crypto,
+			       struct ieee80211_key_conf *key);
+void rt2800_config_filter(struct rt2x00_dev *rt2x00dev,
+			  const unsigned int filter_flags);
+void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
+			struct rt2x00intf_conf *conf, const unsigned int flags);
+void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp);
+void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant);
+void rt2800_config(struct rt2x00_dev *rt2x00dev,
+		   struct rt2x00lib_conf *libconf,
+		   const unsigned int flags);
+void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual);
+void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual);
+void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
+		       const u32 count);
+
+int rt2800_init_registers(struct rt2x00_dev *rt2x00dev);
+int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev);
+int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev);
+
+extern const struct ieee80211_ops rt2800_mac80211_ops;
+
+#endif /* RT2800LIB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index be81788b80c..3c5b875cdee 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -37,6 +37,8 @@
 #include "rt2x00.h"
 #include "rt2x00pci.h"
 #include "rt2x00soc.h"
+#include "rt2800lib.h"
+#include "rt2800.h"
 #include "rt2800pci.h"
 
 #ifdef CONFIG_RT2800PCI_PCI_MODULE
@@ -54,205 +56,13 @@ static int modparam_nohwcrypt = 1;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
-/*
- * Register access.
- * BBP and RF register require indirect register access,
- * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
- * These indirect registers work with busy bits,
- * and we will try maximal REGISTER_BUSY_COUNT times to access
- * the register while taking a REGISTER_BUSY_DELAY us delay
- * between each attampt. When the busy bit is still set at that time,
- * the access attempt is considered to have failed,
- * and we will print an error.
- */
-#define WAIT_FOR_BBP(__dev, __reg) \
-	rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
-#define WAIT_FOR_RFCSR(__dev, __reg) \
-	rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
-#define WAIT_FOR_RF(__dev, __reg) \
-	rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
-#define WAIT_FOR_MCU(__dev, __reg) \
-	rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \
-			       H2M_MAILBOX_CSR_OWNER, (__reg))
-
-static void rt2800pci_bbp_write(struct rt2x00_dev *rt2x00dev,
-				const unsigned int word, const u8 value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the BBP becomes available, afterwards we
-	 * can safely write the new data into the register.
-	 */
-	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
-
-		rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800pci_bbp_read(struct rt2x00_dev *rt2x00dev,
-			       const unsigned int word, u8 *value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the BBP becomes available, afterwards we
-	 * can safely write the read request into the register.
-	 * After the data has been written, we wait until hardware
-	 * returns the correct value, if at any time the register
-	 * doesn't become available in time, reg will be 0xffffffff
-	 * which means we return 0xff to the caller.
-	 */
-	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
-
-		rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
-
-		WAIT_FOR_BBP(rt2x00dev, &reg);
-	}
-
-	*value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev,
-				  const unsigned int word, const u8 value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the RFCSR becomes available, afterwards we
-	 * can safely write the new data into the register.
-	 */
-	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
-
-		rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev,
-				 const unsigned int word, u8 *value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the RFCSR becomes available, afterwards we
-	 * can safely write the read request into the register.
-	 * After the data has been written, we wait until hardware
-	 * returns the correct value, if at any time the register
-	 * doesn't become available in time, reg will be 0xffffffff
-	 * which means we return 0xff to the caller.
-	 */
-	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
-
-		rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
-
-		WAIT_FOR_RFCSR(rt2x00dev, &reg);
-	}
-
-	*value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev,
-			       const unsigned int word, const u32 value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the RF becomes available, afterwards we
-	 * can safely write the new data into the register.
-	 */
-	if (WAIT_FOR_RF(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
-		rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
-		rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
-		rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
-
-		rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG0, reg);
-		rt2x00_rf_write(rt2x00dev, word, value);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800pci_mcu_request(struct rt2x00_dev *rt2x00dev,
-				  const u8 command, const u8 token,
-				  const u8 arg0, const u8 arg1)
-{
-	u32 reg;
-
-	/*
-	 * RT2880 and RT3052 don't support MCU requests.
-	 */
-	if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
-	    rt2x00_rt(&rt2x00dev->chip, RT3052))
-		return;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the MCU becomes available, afterwards we
-	 * can safely write the new data into the register.
-	 */
-	if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
-		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
-		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
-		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
-		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
-		rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
-
-		reg = 0;
-		rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
-		rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
 static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
 {
 	unsigned int i;
 	u32 reg;
 
 	for (i = 0; i < 200; i++) {
-		rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CID, &reg);
+		rt2800_register_read(rt2x00dev, H2M_MAILBOX_CID, &reg);
 
 		if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) ||
 		    (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) ||
@@ -266,8 +76,8 @@ static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
 	if (i == 200)
 		ERROR(rt2x00dev, "MCU request failed, no response from hardware\n");
 
-	rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
-	rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
 }
 
 #ifdef CONFIG_RT2800PCI_WISOC
@@ -289,7 +99,7 @@ static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 	struct rt2x00_dev *rt2x00dev = eeprom->data;
 	u32 reg;
 
-	rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
+	rt2800_register_read(rt2x00dev, E2PROM_CSR, &reg);
 
 	eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
 	eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
@@ -311,7 +121,7 @@ static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
 	rt2x00_set_field32(&reg, E2PROM_CSR_CHIP_SELECT,
 			   !!eeprom->reg_chip_select);
 
-	rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
+	rt2800_register_write(rt2x00dev, E2PROM_CSR, reg);
 }
 
 static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
@@ -319,7 +129,7 @@ static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
 	struct eeprom_93cx6 eeprom;
 	u32 reg;
 
-	rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
+	rt2800_register_read(rt2x00dev, E2PROM_CSR, &reg);
 
 	eeprom.data = rt2x00dev;
 	eeprom.register_read = rt2800pci_eepromregister_read;
@@ -340,23 +150,23 @@ static void rt2800pci_efuse_read(struct rt2x00_dev *rt2x00dev,
 {
 	u32 reg;
 
-	rt2x00pci_register_read(rt2x00dev, EFUSE_CTRL, &reg);
+	rt2800_register_read(rt2x00dev, EFUSE_CTRL, &reg);
 	rt2x00_set_field32(&reg, EFUSE_CTRL_ADDRESS_IN, i);
 	rt2x00_set_field32(&reg, EFUSE_CTRL_MODE, 0);
 	rt2x00_set_field32(&reg, EFUSE_CTRL_KICK, 1);
-	rt2x00pci_register_write(rt2x00dev, EFUSE_CTRL, reg);
+	rt2800_register_write(rt2x00dev, EFUSE_CTRL, reg);
 
 	/* Wait until the EEPROM has been loaded */
-	rt2x00pci_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, &reg);
+	rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, &reg);
 
 	/* Apparently the data is read from end to start */
-	rt2x00pci_register_read(rt2x00dev, EFUSE_DATA3,
+	rt2800_register_read(rt2x00dev, EFUSE_DATA3,
 				(u32 *)&rt2x00dev->eeprom[i]);
-	rt2x00pci_register_read(rt2x00dev, EFUSE_DATA2,
+	rt2800_register_read(rt2x00dev, EFUSE_DATA2,
 				(u32 *)&rt2x00dev->eeprom[i + 2]);
-	rt2x00pci_register_read(rt2x00dev, EFUSE_DATA1,
+	rt2800_register_read(rt2x00dev, EFUSE_DATA1,
 				(u32 *)&rt2x00dev->eeprom[i + 4]);
-	rt2x00pci_register_read(rt2x00dev, EFUSE_DATA0,
+	rt2800_register_read(rt2x00dev, EFUSE_DATA0,
 				(u32 *)&rt2x00dev->eeprom[i + 6]);
 }
 
@@ -377,829 +187,6 @@ static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
 }
 #endif /* CONFIG_RT2800PCI_PCI */
 
-#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-static const struct rt2x00debug rt2800pci_rt2x00debug = {
-	.owner	= THIS_MODULE,
-	.csr	= {
-		.read		= rt2x00pci_register_read,
-		.write		= rt2x00pci_register_write,
-		.flags		= RT2X00DEBUGFS_OFFSET,
-		.word_base	= CSR_REG_BASE,
-		.word_size	= sizeof(u32),
-		.word_count	= CSR_REG_SIZE / sizeof(u32),
-	},
-	.eeprom	= {
-		.read		= rt2x00_eeprom_read,
-		.write		= rt2x00_eeprom_write,
-		.word_base	= EEPROM_BASE,
-		.word_size	= sizeof(u16),
-		.word_count	= EEPROM_SIZE / sizeof(u16),
-	},
-	.bbp	= {
-		.read		= rt2800pci_bbp_read,
-		.write		= rt2800pci_bbp_write,
-		.word_base	= BBP_BASE,
-		.word_size	= sizeof(u8),
-		.word_count	= BBP_SIZE / sizeof(u8),
-	},
-	.rf	= {
-		.read		= rt2x00_rf_read,
-		.write		= rt2800pci_rf_write,
-		.word_base	= RF_BASE,
-		.word_size	= sizeof(u32),
-		.word_count	= RF_SIZE / sizeof(u32),
-	},
-};
-#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-
-static int rt2800pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
-{
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
-	return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
-}
-
-#ifdef CONFIG_RT2X00_LIB_LEDS
-static void rt2800pci_brightness_set(struct led_classdev *led_cdev,
-				     enum led_brightness brightness)
-{
-	struct rt2x00_led *led =
-	    container_of(led_cdev, struct rt2x00_led, led_dev);
-	unsigned int enabled = brightness != LED_OFF;
-	unsigned int bg_mode =
-	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
-	unsigned int polarity =
-		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-				   EEPROM_FREQ_LED_POLARITY);
-	unsigned int ledmode =
-		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-				   EEPROM_FREQ_LED_MODE);
-
-	if (led->type == LED_TYPE_RADIO) {
-		rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-				      enabled ? 0x20 : 0);
-	} else if (led->type == LED_TYPE_ASSOC) {
-		rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-				      enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
-	} else if (led->type == LED_TYPE_QUALITY) {
-		/*
-		 * The brightness is divided into 6 levels (0 - 5),
-		 * The specs tell us the following levels:
-		 *	0, 1 ,3, 7, 15, 31
-		 * to determine the level in a simple way we can simply
-		 * work with bitshifting:
-		 *	(1 << level) - 1
-		 */
-		rt2800pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
-				      (1 << brightness / (LED_FULL / 6)) - 1,
-				      polarity);
-	}
-}
-
-static int rt2800pci_blink_set(struct led_classdev *led_cdev,
-			       unsigned long *delay_on,
-			       unsigned long *delay_off)
-{
-	struct rt2x00_led *led =
-	    container_of(led_cdev, struct rt2x00_led, led_dev);
-	u32 reg;
-
-	rt2x00pci_register_read(led->rt2x00dev, LED_CFG, &reg);
-	rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, *delay_on);
-	rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
-	rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
-	rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
-	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
-	rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
-	rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
-	rt2x00pci_register_write(led->rt2x00dev, LED_CFG, reg);
-
-	return 0;
-}
-
-static void rt2800pci_init_led(struct rt2x00_dev *rt2x00dev,
-			       struct rt2x00_led *led,
-			       enum led_type type)
-{
-	led->rt2x00dev = rt2x00dev;
-	led->type = type;
-	led->led_dev.brightness_set = rt2800pci_brightness_set;
-	led->led_dev.blink_set = rt2800pci_blink_set;
-	led->flags = LED_INITIALIZED;
-}
-#endif /* CONFIG_RT2X00_LIB_LEDS */
-
-/*
- * Configuration handlers.
- */
-static void rt2800pci_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
-				       struct rt2x00lib_crypto *crypto,
-				       struct ieee80211_key_conf *key)
-{
-	struct mac_wcid_entry wcid_entry;
-	struct mac_iveiv_entry iveiv_entry;
-	u32 offset;
-	u32 reg;
-
-	offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
-
-	rt2x00pci_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
-			   !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
-			   (crypto->cmd == SET_KEY) * crypto->cipher);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
-			   (crypto->cmd == SET_KEY) * crypto->bssidx);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-	rt2x00pci_register_write(rt2x00dev, offset, reg);
-
-	offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
-
-	memset(&iveiv_entry, 0, sizeof(iveiv_entry));
-	if ((crypto->cipher == CIPHER_TKIP) ||
-	    (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
-	    (crypto->cipher == CIPHER_AES))
-		iveiv_entry.iv[3] |= 0x20;
-	iveiv_entry.iv[3] |= key->keyidx << 6;
-	rt2x00pci_register_multiwrite(rt2x00dev, offset,
-				      &iveiv_entry, sizeof(iveiv_entry));
-
-	offset = MAC_WCID_ENTRY(key->hw_key_idx);
-
-	memset(&wcid_entry, 0, sizeof(wcid_entry));
-	if (crypto->cmd == SET_KEY)
-		memcpy(&wcid_entry, crypto->address, ETH_ALEN);
-	rt2x00pci_register_multiwrite(rt2x00dev, offset,
-				      &wcid_entry, sizeof(wcid_entry));
-}
-
-static int rt2800pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
-				       struct rt2x00lib_crypto *crypto,
-				       struct ieee80211_key_conf *key)
-{
-	struct hw_key_entry key_entry;
-	struct rt2x00_field32 field;
-	u32 offset;
-	u32 reg;
-
-	if (crypto->cmd == SET_KEY) {
-		key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
-
-		memcpy(key_entry.key, crypto->key,
-		       sizeof(key_entry.key));
-		memcpy(key_entry.tx_mic, crypto->tx_mic,
-		       sizeof(key_entry.tx_mic));
-		memcpy(key_entry.rx_mic, crypto->rx_mic,
-		       sizeof(key_entry.rx_mic));
-
-		offset = SHARED_KEY_ENTRY(key->hw_key_idx);
-		rt2x00pci_register_multiwrite(rt2x00dev, offset,
-					      &key_entry, sizeof(key_entry));
-	}
-
-	/*
-	 * The cipher types are stored over multiple registers
-	 * starting with SHARED_KEY_MODE_BASE each word will have
-	 * 32 bits and contains the cipher types for 2 bssidx each.
-	 * Using the correct defines correctly will cause overhead,
-	 * so just calculate the correct offset.
-	 */
-	field.bit_offset = 4 * (key->hw_key_idx % 8);
-	field.bit_mask = 0x7 << field.bit_offset;
-
-	offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-
-	rt2x00pci_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, field,
-			   (crypto->cmd == SET_KEY) * crypto->cipher);
-	rt2x00pci_register_write(rt2x00dev, offset, reg);
-
-	/*
-	 * Update WCID information
-	 */
-	rt2800pci_config_wcid_attr(rt2x00dev, crypto, key);
-
-	return 0;
-}
-
-static int rt2800pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
-					 struct rt2x00lib_crypto *crypto,
-					 struct ieee80211_key_conf *key)
-{
-	struct hw_key_entry key_entry;
-	u32 offset;
-
-	if (crypto->cmd == SET_KEY) {
-		/*
-		 * 1 pairwise key is possible per AID, this means that the AID
-		 * equals our hw_key_idx. Make sure the WCID starts _after_ the
-		 * last possible shared key entry.
-		 */
-		if (crypto->aid > (256 - 32))
-			return -ENOSPC;
-
-		key->hw_key_idx = 32 + crypto->aid;
-
-
-		memcpy(key_entry.key, crypto->key,
-		       sizeof(key_entry.key));
-		memcpy(key_entry.tx_mic, crypto->tx_mic,
-		       sizeof(key_entry.tx_mic));
-		memcpy(key_entry.rx_mic, crypto->rx_mic,
-		       sizeof(key_entry.rx_mic));
-
-		offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
-		rt2x00pci_register_multiwrite(rt2x00dev, offset,
-					      &key_entry, sizeof(key_entry));
-	}
-
-	/*
-	 * Update WCID information
-	 */
-	rt2800pci_config_wcid_attr(rt2x00dev, crypto, key);
-
-	return 0;
-}
-
-static void rt2800pci_config_filter(struct rt2x00_dev *rt2x00dev,
-				    const unsigned int filter_flags)
-{
-	u32 reg;
-
-	/*
-	 * Start configuration steps.
-	 * Note that the version error will always be dropped
-	 * and broadcast frames will always be accepted since
-	 * there is no filter for it at this time.
-	 */
-	rt2x00pci_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
-			   !(filter_flags & FIF_FCSFAIL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
-			   !(filter_flags & FIF_PLCPFAIL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
-			   !(filter_flags & FIF_PROMISC_IN_BSS));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
-			   !(filter_flags & FIF_ALLMULTI));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
-			   !(filter_flags & FIF_PSPOLL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 1);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR, 0);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00pci_register_write(rt2x00dev, RX_FILTER_CFG, reg);
-}
-
-static void rt2800pci_config_intf(struct rt2x00_dev *rt2x00dev,
-				  struct rt2x00_intf *intf,
-				  struct rt2x00intf_conf *conf,
-				  const unsigned int flags)
-{
-	unsigned int beacon_base;
-	u32 reg;
-
-	if (flags & CONFIG_UPDATE_TYPE) {
-		/*
-		 * Clear current synchronisation setup.
-		 * For the Beacon base registers we only need to clear
-		 * the first byte since that byte contains the VALID and OWNER
-		 * bits which (when set to 0) will invalidate the entire beacon.
-		 */
-		beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
-		rt2x00pci_register_write(rt2x00dev, beacon_base, 0);
-
-		/*
-		 * Enable synchronisation.
-		 */
-		rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
-		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
-		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
-		rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-	}
-
-	if (flags & CONFIG_UPDATE_MAC) {
-		reg = le32_to_cpu(conf->mac[1]);
-		rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
-		conf->mac[1] = cpu_to_le32(reg);
-
-		rt2x00pci_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
-					      conf->mac, sizeof(conf->mac));
-	}
-
-	if (flags & CONFIG_UPDATE_BSSID) {
-		reg = le32_to_cpu(conf->bssid[1]);
-		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 0);
-		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
-		conf->bssid[1] = cpu_to_le32(reg);
-
-		rt2x00pci_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
-					      conf->bssid, sizeof(conf->bssid));
-	}
-}
-
-static void rt2800pci_config_erp(struct rt2x00_dev *rt2x00dev,
-				 struct rt2x00lib_erp *erp)
-{
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
-	rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
-			   !!erp->short_preamble);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
-			   !!erp->short_preamble);
-	rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
-			   erp->cts_protection ? 2 : 0);
-	rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
-	rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE,
-				 erp->basic_rates);
-	rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-
-	rt2x00pci_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
-	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
-	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
-	rt2x00pci_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
-	rt2x00pci_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
-			   erp->beacon_int * 16);
-	rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-}
-
-static void rt2800pci_config_ant(struct rt2x00_dev *rt2x00dev,
-				 struct antenna_setup *ant)
-{
-	u8 r1;
-	u8 r3;
-
-	rt2800pci_bbp_read(rt2x00dev, 1, &r1);
-	rt2800pci_bbp_read(rt2x00dev, 3, &r3);
-
-	/*
-	 * Configure the TX antenna.
-	 */
-	switch ((int)ant->tx) {
-	case 1:
-		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
-		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
-		break;
-	case 2:
-		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
-		break;
-	case 3:
-		/* Do nothing */
-		break;
-	}
-
-	/*
-	 * Configure the RX antenna.
-	 */
-	switch ((int)ant->rx) {
-	case 1:
-		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
-		break;
-	case 2:
-		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
-		break;
-	case 3:
-		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
-		break;
-	}
-
-	rt2800pci_bbp_write(rt2x00dev, 3, r3);
-	rt2800pci_bbp_write(rt2x00dev, 1, r1);
-}
-
-static void rt2800pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
-				      struct rt2x00lib_conf *libconf)
-{
-	u16 eeprom;
-	short lna_gain;
-
-	if (libconf->rf.channel <= 14) {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
-	} else if (libconf->rf.channel <= 64) {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
-	} else if (libconf->rf.channel <= 128) {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
-		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
-	} else {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
-		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
-	}
-
-	rt2x00dev->lna_gain = lna_gain;
-}
-
-static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
-					  struct ieee80211_conf *conf,
-					  struct rf_channel *rf,
-					  struct channel_info *info)
-{
-	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
-
-	if (rt2x00dev->default_ant.tx == 1)
-		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
-
-	if (rt2x00dev->default_ant.rx == 1) {
-		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
-		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-	} else if (rt2x00dev->default_ant.rx == 2)
-		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-
-	if (rf->channel > 14) {
-		/*
-		 * When TX power is below 0, we should increase it by 7 to
-		 * make it a positive value (Minumum value is -7).
-		 * However this means that values between 0 and 7 have
-		 * double meaning, and we should set a 7DBm boost flag.
-		 */
-		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
-				   (info->tx_power1 >= 0));
-
-		if (info->tx_power1 < 0)
-			info->tx_power1 += 7;
-
-		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
-				   TXPOWER_A_TO_DEV(info->tx_power1));
-
-		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
-				   (info->tx_power2 >= 0));
-
-		if (info->tx_power2 < 0)
-			info->tx_power2 += 7;
-
-		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
-				   TXPOWER_A_TO_DEV(info->tx_power2));
-	} else {
-		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
-				   TXPOWER_G_TO_DEV(info->tx_power1));
-		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
-				   TXPOWER_G_TO_DEV(info->tx_power2));
-	}
-
-	rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
-
-	rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
-	rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
-	rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-	rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
-
-	udelay(200);
-
-	rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
-	rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
-	rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
-	rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
-
-	udelay(200);
-
-	rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
-	rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
-	rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-	rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
-}
-
-static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
-					  struct ieee80211_conf *conf,
-					  struct rf_channel *rf,
-					  struct channel_info *info)
-{
-	u8 rfcsr;
-
-	rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1);
-	rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3);
-
-	rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
-	rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr);
-
-	rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
-			  TXPOWER_G_TO_DEV(info->tx_power1));
-	rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr);
-
-	rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
-	rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
-
-	rt2800pci_rfcsr_write(rt2x00dev, 24,
-			      rt2x00dev->calibration[conf_is_ht40(conf)]);
-
-	rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
-	rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
-}
-
-static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
-				     struct ieee80211_conf *conf,
-				     struct rf_channel *rf,
-				     struct channel_info *info)
-{
-	u32 reg;
-	unsigned int tx_pin;
-	u8 bbp;
-
-	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
-		rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info);
-	else
-		rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info);
-
-	/*
-	 * Change BBP settings
-	 */
-	rt2800pci_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
-	rt2800pci_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-	rt2800pci_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
-	rt2800pci_bbp_write(rt2x00dev, 86, 0);
-
-	if (rf->channel <= 14) {
-		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
-			rt2800pci_bbp_write(rt2x00dev, 82, 0x62);
-			rt2800pci_bbp_write(rt2x00dev, 75, 0x46);
-		} else {
-			rt2800pci_bbp_write(rt2x00dev, 82, 0x84);
-			rt2800pci_bbp_write(rt2x00dev, 75, 0x50);
-		}
-	} else {
-		rt2800pci_bbp_write(rt2x00dev, 82, 0xf2);
-
-		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
-			rt2800pci_bbp_write(rt2x00dev, 75, 0x46);
-		else
-			rt2800pci_bbp_write(rt2x00dev, 75, 0x50);
-	}
-
-	rt2x00pci_register_read(rt2x00dev, TX_BAND_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
-	rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
-	rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
-	rt2x00pci_register_write(rt2x00dev, TX_BAND_CFG, reg);
-
-	tx_pin = 0;
-
-	/* Turn on unused PA or LNA when not using 1T or 1R */
-	if (rt2x00dev->default_ant.tx != 1) {
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
-	}
-
-	/* Turn on unused PA or LNA when not using 1T or 1R */
-	if (rt2x00dev->default_ant.rx != 1) {
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
-	}
-
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
-
-	rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-
-	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
-	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
-	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
-
-	rt2800pci_bbp_read(rt2x00dev, 3, &bbp);
-	rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
-	rt2800pci_bbp_write(rt2x00dev, 3, bbp);
-
-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-		if (conf_is_ht40(conf)) {
-			rt2800pci_bbp_write(rt2x00dev, 69, 0x1a);
-			rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
-			rt2800pci_bbp_write(rt2x00dev, 73, 0x16);
-		} else {
-			rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
-			rt2800pci_bbp_write(rt2x00dev, 70, 0x08);
-			rt2800pci_bbp_write(rt2x00dev, 73, 0x11);
-		}
-	}
-
-	msleep(1);
-}
-
-static void rt2800pci_config_txpower(struct rt2x00_dev *rt2x00dev,
-				     const int txpower)
-{
-	u32 reg;
-	u32 value = TXPOWER_G_TO_DEV(txpower);
-	u8 r1;
-
-	rt2800pci_bbp_read(rt2x00dev, 1, &r1);
-	rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
-	rt2800pci_bbp_write(rt2x00dev, 1, r1);
-
-	rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_11MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_6MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
-	rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
-
-	rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_54MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS0, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
-	rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
-
-	rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS7, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS8, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
-	rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
-
-	rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS15, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN1, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
-	rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
-
-	rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
-	rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
-}
-
-static void rt2800pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
-					 struct rt2x00lib_conf *libconf)
-{
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, TX_RTY_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
-			   libconf->conf->short_frame_max_tx_count);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
-			   libconf->conf->long_frame_max_tx_count);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
-	rt2x00pci_register_write(rt2x00dev, TX_RTY_CFG, reg);
-}
-
-static void rt2800pci_config_ps(struct rt2x00_dev *rt2x00dev,
-				struct rt2x00lib_conf *libconf)
-{
-	enum dev_state state =
-	    (libconf->conf->flags & IEEE80211_CONF_PS) ?
-		STATE_SLEEP : STATE_AWAKE;
-	u32 reg;
-
-	if (state == STATE_SLEEP) {
-		rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
-
-		rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
-				   libconf->conf->listen_interval - 1);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
-		rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-
-		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-	} else {
-		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-
-		rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
-		rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-	}
-}
-
-static void rt2800pci_config(struct rt2x00_dev *rt2x00dev,
-			     struct rt2x00lib_conf *libconf,
-			     const unsigned int flags)
-{
-	/* Always recalculate LNA gain before changing configuration */
-	rt2800pci_config_lna_gain(rt2x00dev, libconf);
-
-	if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
-		rt2800pci_config_channel(rt2x00dev, libconf->conf,
-					 &libconf->rf, &libconf->channel);
-	if (flags & IEEE80211_CONF_CHANGE_POWER)
-		rt2800pci_config_txpower(rt2x00dev, libconf->conf->power_level);
-	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
-		rt2800pci_config_retry_limit(rt2x00dev, libconf);
-	if (flags & IEEE80211_CONF_CHANGE_PS)
-		rt2800pci_config_ps(rt2x00dev, libconf);
-}
-
-/*
- * Link tuning
- */
-static void rt2800pci_link_stats(struct rt2x00_dev *rt2x00dev,
-				 struct link_qual *qual)
-{
-	u32 reg;
-
-	/*
-	 * Update FCS error count from register.
-	 */
-	rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, &reg);
-	qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
-}
-
-static u8 rt2800pci_get_default_vgc(struct rt2x00_dev *rt2x00dev)
-{
-	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)
-		return 0x2e + rt2x00dev->lna_gain;
-
-	if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
-		return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
-	else
-		return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
-}
-
-static inline void rt2800pci_set_vgc(struct rt2x00_dev *rt2x00dev,
-				     struct link_qual *qual, u8 vgc_level)
-{
-	if (qual->vgc_level != vgc_level) {
-		rt2800pci_bbp_write(rt2x00dev, 66, vgc_level);
-		qual->vgc_level = vgc_level;
-		qual->vgc_level_reg = vgc_level;
-	}
-}
-
-static void rt2800pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
-				  struct link_qual *qual)
-{
-	rt2800pci_set_vgc(rt2x00dev, qual,
-			  rt2800pci_get_default_vgc(rt2x00dev));
-}
-
-static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev,
-				 struct link_qual *qual, const u32 count)
-{
-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
-		return;
-
-	/*
-	 * When RSSI is better then -80 increase VGC level with 0x10
-	 */
-	rt2800pci_set_vgc(rt2x00dev, qual,
-			  rt2800pci_get_default_vgc(rt2x00dev) +
-			  ((qual->rssi > -80) * 0x10));
-}
-
 /*
  * Firmware functions
  */
@@ -1257,7 +244,7 @@ static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev,
 	 * Wait for stable hardware.
 	 */
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
+		rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
 		if (reg && reg != ~0)
 			break;
 		msleep(1);
@@ -1268,42 +255,42 @@ static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev,
 		return -EBUSY;
 	}
 
-	rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
-	rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000);
+	rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
+	rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000);
 
 	/*
 	 * Disable DMA, will be reenabled later when enabling
 	 * the radio.
 	 */
-	rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-	rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 
 	/*
 	 * enable Host program ram write selection
 	 */
 	reg = 0;
 	rt2x00_set_field32(&reg, PBF_SYS_CTRL_HOST_RAM_WRITE, 1);
-	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, reg);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg);
 
 	/*
 	 * Write firmware to device.
 	 */
-	rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
+	rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
 				      data, len);
 
-	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
-	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
 
 	/*
 	 * Wait for device to stabilize.
 	 */
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00pci_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+		rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
 		if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
 			break;
 		msleep(1);
@@ -1322,8 +309,8 @@ static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Initialize BBP R/W access agent
 	 */
-	rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
-	rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 
 	return 0;
 }
@@ -1373,7 +360,7 @@ static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev)
 	struct queue_entry_priv_pci *entry_priv;
 	u32 reg;
 
-	rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
+	rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX0, 1);
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX1, 1);
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX2, 1);
@@ -1381,539 +368,54 @@ static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX4, 1);
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX5, 1);
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DRX_IDX0, 1);
-	rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
+	rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
 
-	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
-	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
 
 	/*
 	 * Initialize registers.
 	 */
 	entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
-	rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma);
-	rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit);
-	rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX0, 0);
-	rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX0, 0);
+	rt2800_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma);
+	rt2800_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit);
+	rt2800_register_write(rt2x00dev, TX_CTX_IDX0, 0);
+	rt2800_register_write(rt2x00dev, TX_DTX_IDX0, 0);
 
 	entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
-	rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma);
-	rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit);
-	rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX1, 0);
-	rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX1, 0);
+	rt2800_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma);
+	rt2800_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit);
+	rt2800_register_write(rt2x00dev, TX_CTX_IDX1, 0);
+	rt2800_register_write(rt2x00dev, TX_DTX_IDX1, 0);
 
 	entry_priv = rt2x00dev->tx[2].entries[0].priv_data;
-	rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma);
-	rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit);
-	rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX2, 0);
-	rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX2, 0);
+	rt2800_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma);
+	rt2800_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit);
+	rt2800_register_write(rt2x00dev, TX_CTX_IDX2, 0);
+	rt2800_register_write(rt2x00dev, TX_DTX_IDX2, 0);
 
 	entry_priv = rt2x00dev->tx[3].entries[0].priv_data;
-	rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma);
-	rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit);
-	rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX3, 0);
-	rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX3, 0);
+	rt2800_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma);
+	rt2800_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit);
+	rt2800_register_write(rt2x00dev, TX_CTX_IDX3, 0);
+	rt2800_register_write(rt2x00dev, TX_DTX_IDX3, 0);
 
 	entry_priv = rt2x00dev->rx->entries[0].priv_data;
-	rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
-	rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
-	rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
-	rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0);
+	rt2800_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
+	rt2800_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
+	rt2800_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
+	rt2800_register_write(rt2x00dev, RX_DRX_IDX, 0);
 
 	/*
 	 * Enable global DMA configuration
 	 */
-	rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-	rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-
-	rt2x00pci_register_write(rt2x00dev, DELAY_INT_CFG, 0);
-
-	return 0;
-}
-
-static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
-{
-	u32 reg;
-	unsigned int i;
-
-	rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-
-	rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
-	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-
-	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-
-	rt2x00pci_register_read(rt2x00dev, BCN_OFFSET0, &reg);
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
-	rt2x00pci_register_write(rt2x00dev, BCN_OFFSET0, reg);
-
-	rt2x00pci_register_read(rt2x00dev, BCN_OFFSET1, &reg);
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
-	rt2x00pci_register_write(rt2x00dev, BCN_OFFSET1, reg);
-
-	rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
-	rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-
-	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-
-	rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
-	rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-
-	rt2x00pci_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
-	rt2x00pci_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
-
-	rt2x00pci_register_read(rt2x00dev, TX_LINK_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_MFB_ENABLE, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_MRQ_EN, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_RDG_EN, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_CF_ACK_EN, 1);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFS, 0);
-	rt2x00pci_register_write(rt2x00dev, TX_LINK_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
-	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
-	rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
-	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
-	if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
-	    rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
-		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
-	else
-		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
-	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
-	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
-	rt2x00pci_register_write(rt2x00dev, MAX_LEN_CFG, reg);
-
-	rt2x00pci_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
-
-	rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AUTORESPONDER, 1);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MMODE, 0);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MREF, 0);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
-	rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_RATE, 8);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-	rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_RATE, 8);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-	rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-	rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-	rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-	rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-	rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-
-	rt2x00pci_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
-	rt2x00pci_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
-
-	rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
-	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
-			   IEEE80211_MAX_RTS_THRESHOLD);
-	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_FBK_EN, 0);
-	rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg);
-
-	rt2x00pci_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
-	rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-
-	/*
-	 * ASIC will keep garbage value after boot, clear encryption keys.
-	 */
-	for (i = 0; i < 4; i++)
-		rt2x00pci_register_write(rt2x00dev,
-					 SHARED_KEY_MODE_ENTRY(i), 0);
-
-	for (i = 0; i < 256; i++) {
-		u32 wcid[2] = { 0xffffffff, 0x00ffffff };
-		rt2x00pci_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
-					      wcid, sizeof(wcid));
-
-		rt2x00pci_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
-		rt2x00pci_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
-	}
-
-	/*
-	 * Clear all beacons
-	 * For the Beacon base registers we only need to clear
-	 * the first byte since that byte contains the VALID and OWNER
-	 * bits which (when set to 0) will invalidate the entire beacon.
-	 */
-	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
-	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
-	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
-	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
-	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
-	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
-	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
-	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
-
-	rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS0FBK, 0);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS1FBK, 0);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS2FBK, 1);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS3FBK, 2);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS4FBK, 3);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS5FBK, 4);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS6FBK, 5);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS7FBK, 6);
-	rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG0, reg);
-
-	rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG1, &reg);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS8FBK, 8);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS9FBK, 8);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS10FBK, 9);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS11FBK, 10);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS12FBK, 11);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS13FBK, 12);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS14FBK, 13);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS15FBK, 14);
-	rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG1, reg);
-
-	rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG0, &reg);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS0FBK, 8);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS1FBK, 8);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS2FBK, 9);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS3FBK, 10);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS4FBK, 11);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS5FBK, 12);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS6FBK, 13);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS7FBK, 14);
-	rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG0, reg);
-
-	rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG1, &reg);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS0FBK, 0);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS1FBK, 0);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS2FBK, 1);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS3FBK, 2);
-	rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG1, reg);
-
-	/*
-	 * We must clear the error counters.
-	 * These registers are cleared on read,
-	 * so we may pass a useless variable to store the value.
-	 */
-	rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, &reg);
-	rt2x00pci_register_read(rt2x00dev, RX_STA_CNT1, &reg);
-	rt2x00pci_register_read(rt2x00dev, RX_STA_CNT2, &reg);
-	rt2x00pci_register_read(rt2x00dev, TX_STA_CNT0, &reg);
-	rt2x00pci_register_read(rt2x00dev, TX_STA_CNT1, &reg);
-	rt2x00pci_register_read(rt2x00dev, TX_STA_CNT2, &reg);
-
-	return 0;
-}
-
-static int rt2800pci_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
-{
-	unsigned int i;
-	u32 reg;
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00pci_register_read(rt2x00dev, MAC_STATUS_CFG, &reg);
-		if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
-			return 0;
-
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
-	return -EACCES;
-}
-
-static int rt2800pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
-{
-	unsigned int i;
-	u8 value;
-
-	/*
-	 * BBP was enabled after firmware was loaded,
-	 * but we need to reactivate it now.
-	 */
-	rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
-	rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
-	msleep(1);
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2800pci_bbp_read(rt2x00dev, 0, &value);
-		if ((value != 0xff) && (value != 0x00))
-			return 0;
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
-	return -EACCES;
-}
-
-static int rt2800pci_init_bbp(struct rt2x00_dev *rt2x00dev)
-{
-	unsigned int i;
-	u16 eeprom;
-	u8 reg_id;
-	u8 value;
-
-	if (unlikely(rt2800pci_wait_bbp_rf_ready(rt2x00dev) ||
-		     rt2800pci_wait_bbp_ready(rt2x00dev)))
-		return -EACCES;
-
-	rt2800pci_bbp_write(rt2x00dev, 65, 0x2c);
-	rt2800pci_bbp_write(rt2x00dev, 66, 0x38);
-	rt2800pci_bbp_write(rt2x00dev, 69, 0x12);
-	rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
-	rt2800pci_bbp_write(rt2x00dev, 73, 0x10);
-	rt2800pci_bbp_write(rt2x00dev, 81, 0x37);
-	rt2800pci_bbp_write(rt2x00dev, 82, 0x62);
-	rt2800pci_bbp_write(rt2x00dev, 83, 0x6a);
-	rt2800pci_bbp_write(rt2x00dev, 84, 0x99);
-	rt2800pci_bbp_write(rt2x00dev, 86, 0x00);
-	rt2800pci_bbp_write(rt2x00dev, 91, 0x04);
-	rt2800pci_bbp_write(rt2x00dev, 92, 0x00);
-	rt2800pci_bbp_write(rt2x00dev, 103, 0x00);
-	rt2800pci_bbp_write(rt2x00dev, 105, 0x05);
-
-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-		rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
-		rt2800pci_bbp_write(rt2x00dev, 73, 0x12);
-	}
-
-	if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
-		rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
-
-	if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
-		rt2800pci_bbp_write(rt2x00dev, 31, 0x08);
-		rt2800pci_bbp_write(rt2x00dev, 78, 0x0e);
-		rt2800pci_bbp_write(rt2x00dev, 80, 0x08);
-	}
-
-	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
-
-		if (eeprom != 0xffff && eeprom != 0x0000) {
-			reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
-			value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
-			rt2800pci_bbp_write(rt2x00dev, reg_id, value);
-		}
-	}
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 
-	return 0;
-}
-
-static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev,
-				   bool bw40, u8 rfcsr24, u8 filter_target)
-{
-	unsigned int i;
-	u8 bbp;
-	u8 rfcsr;
-	u8 passband;
-	u8 stopband;
-	u8 overtuned = 0;
-
-	rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
-
-	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
-	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
-	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
-
-	rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
-	rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
-
-	/*
-	 * Set power & frequency of passband test tone
-	 */
-	rt2800pci_bbp_write(rt2x00dev, 24, 0);
-
-	for (i = 0; i < 100; i++) {
-		rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
-		msleep(1);
-
-		rt2800pci_bbp_read(rt2x00dev, 55, &passband);
-		if (passband)
-			break;
-	}
-
-	/*
-	 * Set power & frequency of stopband test tone
-	 */
-	rt2800pci_bbp_write(rt2x00dev, 24, 0x06);
-
-	for (i = 0; i < 100; i++) {
-		rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
-		msleep(1);
-
-		rt2800pci_bbp_read(rt2x00dev, 55, &stopband);
-
-		if ((passband - stopband) <= filter_target) {
-			rfcsr24++;
-			overtuned += ((passband - stopband) == filter_target);
-		} else
-			break;
-
-		rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
-	}
-
-	rfcsr24 -= !!overtuned;
-
-	rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
-	return rfcsr24;
-}
-
-static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev)
-{
-	u8 rfcsr;
-	u8 bbp;
-
-	if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF3022))
-		return 0;
-
-	/*
-	 * Init RF calibration.
-	 */
-	rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
-	rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
-	msleep(1);
-	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
-	rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
-
-	rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50);
-	rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01);
-	rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7);
-	rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75);
-	rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40);
-	rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03);
-	rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02);
-	rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50);
-	rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39);
-	rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f);
-	rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60);
-	rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21);
-	rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75);
-	rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75);
-	rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90);
-	rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58);
-	rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3);
-	rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92);
-	rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c);
-	rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02);
-	rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba);
-	rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb);
-	rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00);
-	rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31);
-	rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08);
-	rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01);
-	rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25);
-	rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23);
-	rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13);
-	rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83);
-
-	/*
-	 * Set RX Filter calibration for 20MHz and 40MHz
-	 */
-	rt2x00dev->calibration[0] =
-	    rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
-	rt2x00dev->calibration[1] =
-	    rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
-
-	/*
-	 * Set back to initial state
-	 */
-	rt2800pci_bbp_write(rt2x00dev, 24, 0);
-
-	rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
-	rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
-
-	/*
-	 * set BBP back to BW20
-	 */
-	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
-	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
-	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
+	rt2800_register_write(rt2x00dev, DELAY_INT_CFG, 0);
 
 	return 0;
 }
@@ -1926,11 +428,11 @@ static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
 {
 	u32 reg;
 
-	rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
 			   (state == STATE_RADIO_RX_ON) ||
 			   (state == STATE_RADIO_RX_ON_LINK));
-	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 }
 
 static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
@@ -1944,11 +446,11 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 	 * should clear the register to assure a clean state.
 	 */
 	if (state == STATE_RADIO_IRQ_ON) {
-		rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
-		rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+		rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
+		rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
 	}
 
-	rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, &reg);
+	rt2800_register_read(rt2x00dev, INT_MASK_CSR, &reg);
 	rt2x00_set_field32(&reg, INT_MASK_CSR_RXDELAYINT, mask);
 	rt2x00_set_field32(&reg, INT_MASK_CSR_TXDELAYINT, mask);
 	rt2x00_set_field32(&reg, INT_MASK_CSR_RX_DONE, mask);
@@ -1967,7 +469,7 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&reg, INT_MASK_CSR_GPTIMER, mask);
 	rt2x00_set_field32(&reg, INT_MASK_CSR_RX_COHERENT, mask);
 	rt2x00_set_field32(&reg, INT_MASK_CSR_TX_COHERENT, mask);
-	rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
+	rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
 }
 
 static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
@@ -1976,7 +478,7 @@ static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
 	u32 reg;
 
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
 		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
 			return 0;
@@ -1998,50 +500,50 @@ static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
 	 */
 	if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) ||
 		     rt2800pci_init_queues(rt2x00dev) ||
-		     rt2800pci_init_registers(rt2x00dev) ||
+		     rt2800_init_registers(rt2x00dev) ||
 		     rt2800pci_wait_wpdma_ready(rt2x00dev) ||
-		     rt2800pci_init_bbp(rt2x00dev) ||
-		     rt2800pci_init_rfcsr(rt2x00dev)))
+		     rt2800_init_bbp(rt2x00dev) ||
+		     rt2800_init_rfcsr(rt2x00dev)))
 		return -EIO;
 
 	/*
 	 * Send signal to firmware during boot time.
 	 */
-	rt2800pci_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
+	rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
 
 	/*
 	 * Enable RX.
 	 */
-	rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
-	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 
-	rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-	rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 
-	rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
-	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 
 	/*
 	 * Initialize LED control
 	 */
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
-	rt2800pci_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
+	rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
 			      word & 0xff, (word >> 8) & 0xff);
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
-	rt2800pci_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
+	rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
 			      word & 0xff, (word >> 8) & 0xff);
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
-	rt2800pci_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
+	rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
 			      word & 0xff, (word >> 8) & 0xff);
 
 	return 0;
@@ -2051,21 +553,21 @@ static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
 
-	rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-	rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 
-	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
-	rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0);
-	rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, 0);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
+	rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0);
+	rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0);
 
-	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280);
 
-	rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
+	rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX0, 1);
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX1, 1);
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX2, 1);
@@ -2073,10 +575,10 @@ static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX4, 1);
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX5, 1);
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DRX_IDX0, 1);
-	rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
+	rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
 
-	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
-	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
 
 	/* Wait for DMA, ignore error */
 	rt2800pci_wait_wpdma_ready(rt2x00dev);
@@ -2090,10 +592,10 @@ static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
 	 * if the device is booting and wasn't asleep it will return
 	 * failure when attempting to wakeup.
 	 */
-	rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+	rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
 
 	if (state == STATE_AWAKE) {
-		rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0);
+		rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0);
 		rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
 	}
 
@@ -2195,7 +697,7 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
 	rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
 			   test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
-			       (skbdesc->entry->entry_idx + 1) : 0xff);
+			   txdesc->key_idx : 0xff);
 	rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
 			   skb->len - txdesc->l2pad);
 	rt2x00_set_field32(&word, TXWI_W1_PACKETID,
@@ -2204,8 +706,8 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 
 	/*
 	 * Always write 0 to IV/EIV fields, hardware will insert the IV
-	 * from the IVEIV register when ENTRY_TXD_ENCRYPT_IV is set to 0.
-	 * When ENTRY_TXD_ENCRYPT_IV is set to 1 it will use the IV data
+	 * from the IVEIV register when TXD_W3_WIV is set to 0.
+	 * When TXD_W3_WIV is set to 1 it will use the IV data
 	 * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
 	 * crypto entry in the registers should be used to encrypt the frame.
 	 */
@@ -2265,18 +767,18 @@ static void rt2800pci_write_beacon(struct queue_entry *entry)
 	 * Disable beaconing while we are reloading the beacon data,
 	 * otherwise we might be sending out invalid data.
 	 */
-	rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
 	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
-	rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 
 	/*
 	 * Write entire beacon with descriptor to register.
 	 */
 	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-	rt2x00pci_register_multiwrite(rt2x00dev,
+	rt2800_register_multiwrite(rt2x00dev,
 				      beacon_base,
 				      skbdesc->desc, skbdesc->desc_len);
-	rt2x00pci_register_multiwrite(rt2x00dev,
+	rt2800_register_multiwrite(rt2x00dev,
 				      beacon_base + skbdesc->desc_len,
 				      entry->skb->data, entry->skb->len);
 
@@ -2295,12 +797,12 @@ static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 	u32 reg;
 
 	if (queue_idx == QID_BEACON) {
-		rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+		rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
 		if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
 			rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
 			rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
 			rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
-			rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+			rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 		}
 		return;
 	}
@@ -2316,7 +818,7 @@ static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 	else
 		qidx = queue_idx;
 
-	rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx);
+	rt2800_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx);
 }
 
 static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
@@ -2325,16 +827,16 @@ static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
 	u32 reg;
 
 	if (qid == QID_BEACON) {
-		rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, 0);
+		rt2800_register_write(rt2x00dev, BCN_TIME_CFG, 0);
 		return;
 	}
 
-	rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
+	rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE));
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK));
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI));
 	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO));
-	rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
+	rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
 }
 
 /*
@@ -2430,7 +932,7 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 	 * Set RX IDX in register to inform hardware that we have handled
 	 * this entry and it is available for reuse again.
 	 */
-	rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
+	rt2800_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
 
 	/*
 	 * Remove TXWI descriptor from start of buffer.
@@ -2467,7 +969,7 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
 	old_reg = 0;
 
 	while (1) {
-		rt2x00pci_register_read(rt2x00dev, TX_STA_FIFO, &reg);
+		rt2800_register_read(rt2x00dev, TX_STA_FIFO, &reg);
 		if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
 			break;
 
@@ -2551,8 +1053,8 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
 	u32 reg;
 
 	/* Read status and ACK all interrupts */
-	rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
-	rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+	rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
+	rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
 
 	if (!reg)
 		return IRQ_NONE;
@@ -2709,7 +1211,7 @@ static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 * Identify RF chipset.
 	 */
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
-	rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
+	rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip_rf(rt2x00dev, value, reg);
 
 	if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
@@ -2758,9 +1260,9 @@ static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 * Store led settings, for correct led behaviour.
 	 */
 #ifdef CONFIG_RT2X00_LIB_LEDS
-	rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
-	rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
-	rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
+	rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
+	rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
+	rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg);
 #endif /* CONFIG_RT2X00_LIB_LEDS */
@@ -2948,10 +1450,25 @@ static int rt2800pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	return 0;
 }
 
+static const struct rt2800_ops rt2800pci_rt2800_ops = {
+	.register_read		= rt2x00pci_register_read,
+	.register_write		= rt2x00pci_register_write,
+	.register_write_lock	= rt2x00pci_register_write, /* same for PCI */
+
+	.register_multiread	= rt2x00pci_register_multiread,
+	.register_multiwrite	= rt2x00pci_register_multiwrite,
+
+	.regbusy_read		= rt2x00pci_regbusy_read,
+};
+
 static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
 
+	rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
+
+	rt2x00dev->priv = (void *)&rt2800pci_rt2800_ops;
+
 	/*
 	 * Allocate eeprom data.
 	 */
@@ -2996,161 +1513,6 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	return 0;
 }
 
-/*
- * IEEE80211 stack callback functions.
- */
-static void rt2800pci_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
-				   u32 *iv32, u16 *iv16)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct mac_iveiv_entry iveiv_entry;
-	u32 offset;
-
-	offset = MAC_IVEIV_ENTRY(hw_key_idx);
-	rt2x00pci_register_multiread(rt2x00dev, offset,
-				      &iveiv_entry, sizeof(iveiv_entry));
-
-	memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
-	memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
-}
-
-static int rt2800pci_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	u32 reg;
-	bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
-
-	rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES, value);
-	rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-
-	return 0;
-}
-
-static int rt2800pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
-			     const struct ieee80211_tx_queue_params *params)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct data_queue *queue;
-	struct rt2x00_field32 field;
-	int retval;
-	u32 reg;
-	u32 offset;
-
-	/*
-	 * First pass the configuration through rt2x00lib, that will
-	 * update the queue settings and validate the input. After that
-	 * we are free to update the registers based on the value
-	 * in the queue parameter.
-	 */
-	retval = rt2x00mac_conf_tx(hw, queue_idx, params);
-	if (retval)
-		return retval;
-
-	/*
-	 * We only need to perform additional register initialization
-	 * for WMM queues/
-	 */
-	if (queue_idx >= 4)
-		return 0;
-
-	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
-
-	/* Update WMM TXOP register */
-	offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
-	field.bit_offset = (queue_idx & 1) * 16;
-	field.bit_mask = 0xffff << field.bit_offset;
-
-	rt2x00pci_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, field, queue->txop);
-	rt2x00pci_register_write(rt2x00dev, offset, reg);
-
-	/* Update WMM registers */
-	field.bit_offset = queue_idx * 4;
-	field.bit_mask = 0xf << field.bit_offset;
-
-	rt2x00pci_register_read(rt2x00dev, WMM_AIFSN_CFG, &reg);
-	rt2x00_set_field32(&reg, field, queue->aifs);
-	rt2x00pci_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, WMM_CWMIN_CFG, &reg);
-	rt2x00_set_field32(&reg, field, queue->cw_min);
-	rt2x00pci_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
-
-	rt2x00pci_register_read(rt2x00dev, WMM_CWMAX_CFG, &reg);
-	rt2x00_set_field32(&reg, field, queue->cw_max);
-	rt2x00pci_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
-
-	/* Update EDCA registers */
-	offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
-
-	rt2x00pci_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, EDCA_AC0_CFG_TX_OP, queue->txop);
-	rt2x00_set_field32(&reg, EDCA_AC0_CFG_AIFSN, queue->aifs);
-	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMIN, queue->cw_min);
-	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMAX, queue->cw_max);
-	rt2x00pci_register_write(rt2x00dev, offset, reg);
-
-	return 0;
-}
-
-static u64 rt2800pci_get_tsf(struct ieee80211_hw *hw)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	u64 tsf;
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW1, &reg);
-	tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
-	rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW0, &reg);
-	tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
-
-	return tsf;
-}
-
-static const struct ieee80211_ops rt2800pci_mac80211_ops = {
-	.tx			= rt2x00mac_tx,
-	.start			= rt2x00mac_start,
-	.stop			= rt2x00mac_stop,
-	.add_interface		= rt2x00mac_add_interface,
-	.remove_interface	= rt2x00mac_remove_interface,
-	.config			= rt2x00mac_config,
-	.configure_filter	= rt2x00mac_configure_filter,
-	.set_key		= rt2x00mac_set_key,
-	.get_stats		= rt2x00mac_get_stats,
-	.get_tkip_seq		= rt2800pci_get_tkip_seq,
-	.set_rts_threshold	= rt2800pci_set_rts_threshold,
-	.bss_info_changed	= rt2x00mac_bss_info_changed,
-	.conf_tx		= rt2800pci_conf_tx,
-	.get_tx_stats		= rt2x00mac_get_tx_stats,
-	.get_tsf		= rt2800pci_get_tsf,
-	.rfkill_poll		= rt2x00mac_rfkill_poll,
-};
-
 static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
 	.irq_handler		= rt2800pci_interrupt,
 	.probe_hw		= rt2800pci_probe_hw,
@@ -3162,23 +1524,23 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
 	.get_entry_state	= rt2800pci_get_entry_state,
 	.clear_entry		= rt2800pci_clear_entry,
 	.set_device_state	= rt2800pci_set_device_state,
-	.rfkill_poll		= rt2800pci_rfkill_poll,
-	.link_stats		= rt2800pci_link_stats,
-	.reset_tuner		= rt2800pci_reset_tuner,
-	.link_tuner		= rt2800pci_link_tuner,
+	.rfkill_poll		= rt2800_rfkill_poll,
+	.link_stats		= rt2800_link_stats,
+	.reset_tuner		= rt2800_reset_tuner,
+	.link_tuner		= rt2800_link_tuner,
 	.write_tx_desc		= rt2800pci_write_tx_desc,
 	.write_tx_data		= rt2x00pci_write_tx_data,
 	.write_beacon		= rt2800pci_write_beacon,
 	.kick_tx_queue		= rt2800pci_kick_tx_queue,
 	.kill_tx_queue		= rt2800pci_kill_tx_queue,
 	.fill_rxdone		= rt2800pci_fill_rxdone,
-	.config_shared_key	= rt2800pci_config_shared_key,
-	.config_pairwise_key	= rt2800pci_config_pairwise_key,
-	.config_filter		= rt2800pci_config_filter,
-	.config_intf		= rt2800pci_config_intf,
-	.config_erp		= rt2800pci_config_erp,
-	.config_ant		= rt2800pci_config_ant,
-	.config			= rt2800pci_config,
+	.config_shared_key	= rt2800_config_shared_key,
+	.config_pairwise_key	= rt2800_config_pairwise_key,
+	.config_filter		= rt2800_config_filter,
+	.config_intf		= rt2800_config_intf,
+	.config_erp		= rt2800_config_erp,
+	.config_ant		= rt2800_config_ant,
+	.config			= rt2800_config,
 };
 
 static const struct data_queue_desc rt2800pci_queue_rx = {
@@ -3213,9 +1575,9 @@ static const struct rt2x00_ops rt2800pci_ops = {
 	.tx		= &rt2800pci_queue_tx,
 	.bcn		= &rt2800pci_queue_bcn,
 	.lib		= &rt2800pci_rt2x00_ops,
-	.hw		= &rt2800pci_mac80211_ops,
+	.hw		= &rt2800_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-	.debugfs	= &rt2800pci_rt2x00debug,
+	.debugfs	= &rt2800_rt2x00debug,
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 };
 
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h
index 85690881522..1dbf13270cd 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.h
+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
@@ -28,61 +28,6 @@
 #define RT2800PCI_H
 
 /*
- * RF chip defines.
- *
- * RF2820 2.4G 2T3R
- * RF2850 2.4G/5G 2T3R
- * RF2720 2.4G 1T2R
- * RF2750 2.4G/5G 1T2R
- * RF3020 2.4G 1T1R
- * RF2020 2.4G B/G
- * RF3021 2.4G 1T2R
- * RF3022 2.4G 2T2R
- * RF3052 2.4G 2T2R
- */
-#define RF2820				0x0001
-#define RF2850				0x0002
-#define RF2720				0x0003
-#define RF2750				0x0004
-#define RF3020				0x0005
-#define RF2020				0x0006
-#define RF3021				0x0007
-#define RF3022				0x0008
-#define RF3052				0x0009
-
-/*
- * RT2860 version
- */
-#define RT2860C_VERSION			0x28600100
-#define RT2860D_VERSION			0x28600101
-#define RT2880E_VERSION			0x28720200
-#define RT2883_VERSION			0x28830300
-#define RT3070_VERSION			0x30700200
-
-/*
- * Signal information.
- * Default offset is required for RSSI <-> dBm conversion.
- */
-#define DEFAULT_RSSI_OFFSET		120 /* FIXME */
-
-/*
- * Register layout information.
- */
-#define CSR_REG_BASE			0x1000
-#define CSR_REG_SIZE			0x0800
-#define EEPROM_BASE			0x0000
-#define EEPROM_SIZE			0x0110
-#define BBP_BASE			0x0000
-#define BBP_SIZE			0x0080
-#define RF_BASE				0x0004
-#define RF_SIZE				0x0010
-
-/*
- * Number of TX queues.
- */
-#define NUM_TX_QUEUES			4
-
-/*
  * PCI registers.
  */
 
@@ -102,215 +47,6 @@
 #define E2PROM_CSR_RELOAD		FIELD32(0x00000080)
 
 /*
- * INT_SOURCE_CSR: Interrupt source register.
- * Write one to clear corresponding bit.
- * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
- */
-#define INT_SOURCE_CSR			0x0200
-#define INT_SOURCE_CSR_RXDELAYINT	FIELD32(0x00000001)
-#define INT_SOURCE_CSR_TXDELAYINT	FIELD32(0x00000002)
-#define INT_SOURCE_CSR_RX_DONE		FIELD32(0x00000004)
-#define INT_SOURCE_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
-#define INT_SOURCE_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
-#define INT_SOURCE_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
-#define INT_SOURCE_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
-#define INT_SOURCE_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
-#define INT_SOURCE_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
-#define INT_SOURCE_CSR_MCU_COMMAND	FIELD32(0x00000200)
-#define INT_SOURCE_CSR_RXTX_COHERENT	FIELD32(0x00000400)
-#define INT_SOURCE_CSR_TBTT		FIELD32(0x00000800)
-#define INT_SOURCE_CSR_PRE_TBTT		FIELD32(0x00001000)
-#define INT_SOURCE_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
-#define INT_SOURCE_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
-#define INT_SOURCE_CSR_GPTIMER		FIELD32(0x00008000)
-#define INT_SOURCE_CSR_RX_COHERENT	FIELD32(0x00010000)
-#define INT_SOURCE_CSR_TX_COHERENT	FIELD32(0x00020000)
-
-/*
- * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
- */
-#define INT_MASK_CSR			0x0204
-#define INT_MASK_CSR_RXDELAYINT		FIELD32(0x00000001)
-#define INT_MASK_CSR_TXDELAYINT		FIELD32(0x00000002)
-#define INT_MASK_CSR_RX_DONE		FIELD32(0x00000004)
-#define INT_MASK_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
-#define INT_MASK_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
-#define INT_MASK_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
-#define INT_MASK_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
-#define INT_MASK_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
-#define INT_MASK_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
-#define INT_MASK_CSR_MCU_COMMAND	FIELD32(0x00000200)
-#define INT_MASK_CSR_RXTX_COHERENT	FIELD32(0x00000400)
-#define INT_MASK_CSR_TBTT		FIELD32(0x00000800)
-#define INT_MASK_CSR_PRE_TBTT		FIELD32(0x00001000)
-#define INT_MASK_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
-#define INT_MASK_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
-#define INT_MASK_CSR_GPTIMER		FIELD32(0x00008000)
-#define INT_MASK_CSR_RX_COHERENT	FIELD32(0x00010000)
-#define INT_MASK_CSR_TX_COHERENT	FIELD32(0x00020000)
-
-/*
- * WPDMA_GLO_CFG
- */
-#define WPDMA_GLO_CFG 			0x0208
-#define WPDMA_GLO_CFG_ENABLE_TX_DMA	FIELD32(0x00000001)
-#define WPDMA_GLO_CFG_TX_DMA_BUSY    	FIELD32(0x00000002)
-#define WPDMA_GLO_CFG_ENABLE_RX_DMA	FIELD32(0x00000004)
-#define WPDMA_GLO_CFG_RX_DMA_BUSY	FIELD32(0x00000008)
-#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE	FIELD32(0x00000030)
-#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE	FIELD32(0x00000040)
-#define WPDMA_GLO_CFG_BIG_ENDIAN	FIELD32(0x00000080)
-#define WPDMA_GLO_CFG_RX_HDR_SCATTER	FIELD32(0x0000ff00)
-#define WPDMA_GLO_CFG_HDR_SEG_LEN	FIELD32(0xffff0000)
-
-/*
- * WPDMA_RST_IDX
- */
-#define WPDMA_RST_IDX 			0x020c
-#define WPDMA_RST_IDX_DTX_IDX0		FIELD32(0x00000001)
-#define WPDMA_RST_IDX_DTX_IDX1		FIELD32(0x00000002)
-#define WPDMA_RST_IDX_DTX_IDX2		FIELD32(0x00000004)
-#define WPDMA_RST_IDX_DTX_IDX3		FIELD32(0x00000008)
-#define WPDMA_RST_IDX_DTX_IDX4		FIELD32(0x00000010)
-#define WPDMA_RST_IDX_DTX_IDX5		FIELD32(0x00000020)
-#define WPDMA_RST_IDX_DRX_IDX0		FIELD32(0x00010000)
-
-/*
- * DELAY_INT_CFG
- */
-#define DELAY_INT_CFG			0x0210
-#define DELAY_INT_CFG_RXMAX_PTIME	FIELD32(0x000000ff)
-#define DELAY_INT_CFG_RXMAX_PINT	FIELD32(0x00007f00)
-#define DELAY_INT_CFG_RXDLY_INT_EN	FIELD32(0x00008000)
-#define DELAY_INT_CFG_TXMAX_PTIME	FIELD32(0x00ff0000)
-#define DELAY_INT_CFG_TXMAX_PINT	FIELD32(0x7f000000)
-#define DELAY_INT_CFG_TXDLY_INT_EN	FIELD32(0x80000000)
-
-/*
- * WMM_AIFSN_CFG: Aifsn for each EDCA AC
- * AIFSN0: AC_BE
- * AIFSN1: AC_BK
- * AIFSN1: AC_VI
- * AIFSN1: AC_VO
- */
-#define WMM_AIFSN_CFG			0x0214
-#define WMM_AIFSN_CFG_AIFSN0		FIELD32(0x0000000f)
-#define WMM_AIFSN_CFG_AIFSN1		FIELD32(0x000000f0)
-#define WMM_AIFSN_CFG_AIFSN2		FIELD32(0x00000f00)
-#define WMM_AIFSN_CFG_AIFSN3		FIELD32(0x0000f000)
-
-/*
- * WMM_CWMIN_CSR: CWmin for each EDCA AC
- * CWMIN0: AC_BE
- * CWMIN1: AC_BK
- * CWMIN1: AC_VI
- * CWMIN1: AC_VO
- */
-#define WMM_CWMIN_CFG			0x0218
-#define WMM_CWMIN_CFG_CWMIN0		FIELD32(0x0000000f)
-#define WMM_CWMIN_CFG_CWMIN1		FIELD32(0x000000f0)
-#define WMM_CWMIN_CFG_CWMIN2		FIELD32(0x00000f00)
-#define WMM_CWMIN_CFG_CWMIN3		FIELD32(0x0000f000)
-
-/*
- * WMM_CWMAX_CSR: CWmax for each EDCA AC
- * CWMAX0: AC_BE
- * CWMAX1: AC_BK
- * CWMAX1: AC_VI
- * CWMAX1: AC_VO
- */
-#define WMM_CWMAX_CFG			0x021c
-#define WMM_CWMAX_CFG_CWMAX0		FIELD32(0x0000000f)
-#define WMM_CWMAX_CFG_CWMAX1		FIELD32(0x000000f0)
-#define WMM_CWMAX_CFG_CWMAX2		FIELD32(0x00000f00)
-#define WMM_CWMAX_CFG_CWMAX3		FIELD32(0x0000f000)
-
-/*
- * AC_TXOP0: AC_BK/AC_BE TXOP register
- * AC0TXOP: AC_BK in unit of 32us
- * AC1TXOP: AC_BE in unit of 32us
- */
-#define WMM_TXOP0_CFG			0x0220
-#define WMM_TXOP0_CFG_AC0TXOP		FIELD32(0x0000ffff)
-#define WMM_TXOP0_CFG_AC1TXOP		FIELD32(0xffff0000)
-
-/*
- * AC_TXOP1: AC_VO/AC_VI TXOP register
- * AC2TXOP: AC_VI in unit of 32us
- * AC3TXOP: AC_VO in unit of 32us
- */
-#define WMM_TXOP1_CFG			0x0224
-#define WMM_TXOP1_CFG_AC2TXOP		FIELD32(0x0000ffff)
-#define WMM_TXOP1_CFG_AC3TXOP		FIELD32(0xffff0000)
-
-/*
- * GPIO_CTRL_CFG:
- */
-#define GPIO_CTRL_CFG			0x0228
-#define GPIO_CTRL_CFG_BIT0		FIELD32(0x00000001)
-#define GPIO_CTRL_CFG_BIT1		FIELD32(0x00000002)
-#define GPIO_CTRL_CFG_BIT2		FIELD32(0x00000004)
-#define GPIO_CTRL_CFG_BIT3		FIELD32(0x00000008)
-#define GPIO_CTRL_CFG_BIT4		FIELD32(0x00000010)
-#define GPIO_CTRL_CFG_BIT5		FIELD32(0x00000020)
-#define GPIO_CTRL_CFG_BIT6		FIELD32(0x00000040)
-#define GPIO_CTRL_CFG_BIT7		FIELD32(0x00000080)
-#define GPIO_CTRL_CFG_BIT8		FIELD32(0x00000100)
-
-/*
- * MCU_CMD_CFG
- */
-#define MCU_CMD_CFG			0x022c
-
-/*
- * AC_BK register offsets
- */
-#define TX_BASE_PTR0			0x0230
-#define TX_MAX_CNT0			0x0234
-#define TX_CTX_IDX0			0x0238
-#define TX_DTX_IDX0			0x023c
-
-/*
- * AC_BE register offsets
- */
-#define TX_BASE_PTR1			0x0240
-#define TX_MAX_CNT1			0x0244
-#define TX_CTX_IDX1			0x0248
-#define TX_DTX_IDX1			0x024c
-
-/*
- * AC_VI register offsets
- */
-#define TX_BASE_PTR2			0x0250
-#define TX_MAX_CNT2			0x0254
-#define TX_CTX_IDX2			0x0258
-#define TX_DTX_IDX2			0x025c
-
-/*
- * AC_VO register offsets
- */
-#define TX_BASE_PTR3			0x0260
-#define TX_MAX_CNT3			0x0264
-#define TX_CTX_IDX3			0x0268
-#define TX_DTX_IDX3			0x026c
-
-/*
- * HCCA register offsets
- */
-#define TX_BASE_PTR4			0x0270
-#define TX_MAX_CNT4			0x0274
-#define TX_CTX_IDX4			0x0278
-#define TX_DTX_IDX4			0x027c
-
-/*
- * MGMT register offsets
- */
-#define TX_BASE_PTR5			0x0280
-#define TX_MAX_CNT5			0x0284
-#define TX_CTX_IDX5			0x0288
-#define TX_DTX_IDX5			0x028c
-
-/*
  * Queue register offset macros
  */
 #define TX_QUEUE_REG_OFFSET		0x10
@@ -320,72 +56,6 @@
 #define TX_DTX_IDX(__x)			TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
 
 /*
- * RX register offsets
- */
-#define RX_BASE_PTR			0x0290
-#define RX_MAX_CNT			0x0294
-#define RX_CRX_IDX			0x0298
-#define RX_DRX_IDX			0x029c
-
-/*
- * PBF_SYS_CTRL
- * HOST_RAM_WRITE: enable Host program ram write selection
- */
-#define PBF_SYS_CTRL			0x0400
-#define PBF_SYS_CTRL_READY		FIELD32(0x00000080)
-#define PBF_SYS_CTRL_HOST_RAM_WRITE	FIELD32(0x00010000)
-
-/*
- * HOST-MCU shared memory
- */
-#define HOST_CMD_CSR			0x0404
-#define HOST_CMD_CSR_HOST_COMMAND	FIELD32(0x000000ff)
-
-/*
- * PBF registers
- * Most are for debug. Driver doesn't touch PBF register.
- */
-#define PBF_CFG				0x0408
-#define PBF_MAX_PCNT			0x040c
-#define PBF_CTRL			0x0410
-#define PBF_INT_STA			0x0414
-#define PBF_INT_ENA			0x0418
-
-/*
- * BCN_OFFSET0:
- */
-#define BCN_OFFSET0			0x042c
-#define BCN_OFFSET0_BCN0		FIELD32(0x000000ff)
-#define BCN_OFFSET0_BCN1		FIELD32(0x0000ff00)
-#define BCN_OFFSET0_BCN2		FIELD32(0x00ff0000)
-#define BCN_OFFSET0_BCN3		FIELD32(0xff000000)
-
-/*
- * BCN_OFFSET1:
- */
-#define BCN_OFFSET1			0x0430
-#define BCN_OFFSET1_BCN4		FIELD32(0x000000ff)
-#define BCN_OFFSET1_BCN5		FIELD32(0x0000ff00)
-#define BCN_OFFSET1_BCN6		FIELD32(0x00ff0000)
-#define BCN_OFFSET1_BCN7		FIELD32(0xff000000)
-
-/*
- * PBF registers
- * Most are for debug. Driver doesn't touch PBF register.
- */
-#define TXRXQ_PCNT			0x0438
-#define PBF_DBG				0x043c
-
-/*
- * RF registers
- */
-#define	RF_CSR_CFG			0x0500
-#define RF_CSR_CFG_DATA			FIELD32(0x000000ff)
-#define RF_CSR_CFG_REGNUM		FIELD32(0x00001f00)
-#define RF_CSR_CFG_WRITE		FIELD32(0x00010000)
-#define RF_CSR_CFG_BUSY			FIELD32(0x00020000)
-
-/*
  * EFUSE_CSR: RT3090 EEPROM
  */
 #define EFUSE_CTRL			0x0580
@@ -414,1360 +84,16 @@
 #define EFUSE_DATA3			0x059c
 
 /*
- * MAC Control/Status Registers(CSR).
- * Some values are set in TU, whereas 1 TU == 1024 us.
- */
-
-/*
- * MAC_CSR0: ASIC revision number.
- * ASIC_REV: 0
- * ASIC_VER: 2860
- */
-#define MAC_CSR0			0x1000
-#define MAC_CSR0_ASIC_REV		FIELD32(0x0000ffff)
-#define MAC_CSR0_ASIC_VER		FIELD32(0xffff0000)
-
-/*
- * MAC_SYS_CTRL:
- */
-#define MAC_SYS_CTRL			0x1004
-#define MAC_SYS_CTRL_RESET_CSR		FIELD32(0x00000001)
-#define MAC_SYS_CTRL_RESET_BBP		FIELD32(0x00000002)
-#define MAC_SYS_CTRL_ENABLE_TX		FIELD32(0x00000004)
-#define MAC_SYS_CTRL_ENABLE_RX		FIELD32(0x00000008)
-#define MAC_SYS_CTRL_CONTINUOUS_TX	FIELD32(0x00000010)
-#define MAC_SYS_CTRL_LOOPBACK		FIELD32(0x00000020)
-#define MAC_SYS_CTRL_WLAN_HALT		FIELD32(0x00000040)
-#define MAC_SYS_CTRL_RX_TIMESTAMP	FIELD32(0x00000080)
-
-/*
- * MAC_ADDR_DW0: STA MAC register 0
- */
-#define MAC_ADDR_DW0			0x1008
-#define MAC_ADDR_DW0_BYTE0		FIELD32(0x000000ff)
-#define MAC_ADDR_DW0_BYTE1		FIELD32(0x0000ff00)
-#define MAC_ADDR_DW0_BYTE2		FIELD32(0x00ff0000)
-#define MAC_ADDR_DW0_BYTE3		FIELD32(0xff000000)
-
-/*
- * MAC_ADDR_DW1: STA MAC register 1
- * UNICAST_TO_ME_MASK:
- * Used to mask off bits from byte 5 of the MAC address
- * to determine the UNICAST_TO_ME bit for RX frames.
- * The full mask is complemented by BSS_ID_MASK:
- *    MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
- */
-#define MAC_ADDR_DW1			0x100c
-#define MAC_ADDR_DW1_BYTE4		FIELD32(0x000000ff)
-#define MAC_ADDR_DW1_BYTE5		FIELD32(0x0000ff00)
-#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK	FIELD32(0x00ff0000)
-
-/*
- * MAC_BSSID_DW0: BSSID register 0
- */
-#define MAC_BSSID_DW0			0x1010
-#define MAC_BSSID_DW0_BYTE0		FIELD32(0x000000ff)
-#define MAC_BSSID_DW0_BYTE1		FIELD32(0x0000ff00)
-#define MAC_BSSID_DW0_BYTE2		FIELD32(0x00ff0000)
-#define MAC_BSSID_DW0_BYTE3		FIELD32(0xff000000)
-
-/*
- * MAC_BSSID_DW1: BSSID register 1
- * BSS_ID_MASK:
- *     0: 1-BSSID mode (BSS index = 0)
- *     1: 2-BSSID mode (BSS index: Byte5, bit 0)
- *     2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
- *     3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
- * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
- * BSSID. This will make sure that those bits will be ignored
- * when determining the MY_BSS of RX frames.
- */
-#define MAC_BSSID_DW1			0x1014
-#define MAC_BSSID_DW1_BYTE4		FIELD32(0x000000ff)
-#define MAC_BSSID_DW1_BYTE5		FIELD32(0x0000ff00)
-#define MAC_BSSID_DW1_BSS_ID_MASK	FIELD32(0x00030000)
-#define MAC_BSSID_DW1_BSS_BCN_NUM	FIELD32(0x001c0000)
-
-/*
- * MAX_LEN_CFG: Maximum frame length register.
- * MAX_MPDU: rt2860b max 16k bytes
- * MAX_PSDU: Maximum PSDU length
- *	(power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
- */
-#define MAX_LEN_CFG			0x1018
-#define MAX_LEN_CFG_MAX_MPDU		FIELD32(0x00000fff)
-#define MAX_LEN_CFG_MAX_PSDU		FIELD32(0x00003000)
-#define MAX_LEN_CFG_MIN_PSDU		FIELD32(0x0000c000)
-#define MAX_LEN_CFG_MIN_MPDU		FIELD32(0x000f0000)
-
-/*
- * BBP_CSR_CFG: BBP serial control register
- * VALUE: Register value to program into BBP
- * REG_NUM: Selected BBP register
- * READ_CONTROL: 0 write BBP, 1 read BBP
- * BUSY: ASIC is busy executing BBP commands
- * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
- * BBP_RW_MODE: 0 serial, 1 paralell
- */
-#define BBP_CSR_CFG			0x101c
-#define BBP_CSR_CFG_VALUE		FIELD32(0x000000ff)
-#define BBP_CSR_CFG_REGNUM		FIELD32(0x0000ff00)
-#define BBP_CSR_CFG_READ_CONTROL	FIELD32(0x00010000)
-#define BBP_CSR_CFG_BUSY		FIELD32(0x00020000)
-#define BBP_CSR_CFG_BBP_PAR_DUR		FIELD32(0x00040000)
-#define BBP_CSR_CFG_BBP_RW_MODE		FIELD32(0x00080000)
-
-/*
- * RF_CSR_CFG0: RF control register
- * REGID_AND_VALUE: Register value to program into RF
- * BITWIDTH: Selected RF register
- * STANDBYMODE: 0 high when standby, 1 low when standby
- * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
- * BUSY: ASIC is busy executing RF commands
- */
-#define RF_CSR_CFG0			0x1020
-#define RF_CSR_CFG0_REGID_AND_VALUE	FIELD32(0x00ffffff)
-#define RF_CSR_CFG0_BITWIDTH		FIELD32(0x1f000000)
-#define RF_CSR_CFG0_REG_VALUE_BW	FIELD32(0x1fffffff)
-#define RF_CSR_CFG0_STANDBYMODE		FIELD32(0x20000000)
-#define RF_CSR_CFG0_SEL			FIELD32(0x40000000)
-#define RF_CSR_CFG0_BUSY		FIELD32(0x80000000)
-
-/*
- * RF_CSR_CFG1: RF control register
- * REGID_AND_VALUE: Register value to program into RF
- * RFGAP: Gap between BB_CONTROL_RF and RF_LE
- *        0: 3 system clock cycle (37.5usec)
- *        1: 5 system clock cycle (62.5usec)
- */
-#define RF_CSR_CFG1			0x1024
-#define RF_CSR_CFG1_REGID_AND_VALUE	FIELD32(0x00ffffff)
-#define RF_CSR_CFG1_RFGAP		FIELD32(0x1f000000)
-
-/*
- * RF_CSR_CFG2: RF control register
- * VALUE: Register value to program into RF
- * RFGAP: Gap between BB_CONTROL_RF and RF_LE
- *        0: 3 system clock cycle (37.5usec)
- *        1: 5 system clock cycle (62.5usec)
- */
-#define RF_CSR_CFG2			0x1028
-#define RF_CSR_CFG2_VALUE		FIELD32(0x00ffffff)
-
-/*
- * LED_CFG: LED control
- * color LED's:
- *   0: off
- *   1: blinking upon TX2
- *   2: periodic slow blinking
- *   3: always on
- * LED polarity:
- *   0: active low
- *   1: active high
- */
-#define LED_CFG				0x102c
-#define LED_CFG_ON_PERIOD		FIELD32(0x000000ff)
-#define LED_CFG_OFF_PERIOD		FIELD32(0x0000ff00)
-#define LED_CFG_SLOW_BLINK_PERIOD	FIELD32(0x003f0000)
-#define LED_CFG_R_LED_MODE		FIELD32(0x03000000)
-#define LED_CFG_G_LED_MODE		FIELD32(0x0c000000)
-#define LED_CFG_Y_LED_MODE		FIELD32(0x30000000)
-#define LED_CFG_LED_POLAR		FIELD32(0x40000000)
-
-/*
- * XIFS_TIME_CFG: MAC timing
- * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
- * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
- * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
- *	when MAC doesn't reference BBP signal BBRXEND
- * EIFS: unit 1us
- * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
- *
- */
-#define XIFS_TIME_CFG			0x1100
-#define XIFS_TIME_CFG_CCKM_SIFS_TIME	FIELD32(0x000000ff)
-#define XIFS_TIME_CFG_OFDM_SIFS_TIME	FIELD32(0x0000ff00)
-#define XIFS_TIME_CFG_OFDM_XIFS_TIME	FIELD32(0x000f0000)
-#define XIFS_TIME_CFG_EIFS		FIELD32(0x1ff00000)
-#define XIFS_TIME_CFG_BB_RXEND_ENABLE	FIELD32(0x20000000)
-
-/*
- * BKOFF_SLOT_CFG:
- */
-#define BKOFF_SLOT_CFG			0x1104
-#define BKOFF_SLOT_CFG_SLOT_TIME	FIELD32(0x000000ff)
-#define BKOFF_SLOT_CFG_CC_DELAY_TIME	FIELD32(0x0000ff00)
-
-/*
- * NAV_TIME_CFG:
- */
-#define NAV_TIME_CFG			0x1108
-#define NAV_TIME_CFG_SIFS		FIELD32(0x000000ff)
-#define NAV_TIME_CFG_SLOT_TIME		FIELD32(0x0000ff00)
-#define NAV_TIME_CFG_EIFS		FIELD32(0x01ff0000)
-#define NAV_TIME_ZERO_SIFS		FIELD32(0x02000000)
-
-/*
- * CH_TIME_CFG: count as channel busy
- */
-#define CH_TIME_CFG     	        0x110c
-
-/*
- * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
- */
-#define PBF_LIFE_TIMER     	        0x1110
-
-/*
- * BCN_TIME_CFG:
- * BEACON_INTERVAL: in unit of 1/16 TU
- * TSF_TICKING: Enable TSF auto counting
- * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
- * BEACON_GEN: Enable beacon generator
- */
-#define BCN_TIME_CFG			0x1114
-#define BCN_TIME_CFG_BEACON_INTERVAL	FIELD32(0x0000ffff)
-#define BCN_TIME_CFG_TSF_TICKING	FIELD32(0x00010000)
-#define BCN_TIME_CFG_TSF_SYNC		FIELD32(0x00060000)
-#define BCN_TIME_CFG_TBTT_ENABLE	FIELD32(0x00080000)
-#define BCN_TIME_CFG_BEACON_GEN		FIELD32(0x00100000)
-#define BCN_TIME_CFG_TX_TIME_COMPENSATE	FIELD32(0xf0000000)
-
-/*
- * TBTT_SYNC_CFG:
- */
-#define TBTT_SYNC_CFG			0x1118
-
-/*
- * TSF_TIMER_DW0: Local lsb TSF timer, read-only
- */
-#define TSF_TIMER_DW0			0x111c
-#define TSF_TIMER_DW0_LOW_WORD		FIELD32(0xffffffff)
-
-/*
- * TSF_TIMER_DW1: Local msb TSF timer, read-only
- */
-#define TSF_TIMER_DW1			0x1120
-#define TSF_TIMER_DW1_HIGH_WORD		FIELD32(0xffffffff)
-
-/*
- * TBTT_TIMER: TImer remains till next TBTT, read-only
- */
-#define TBTT_TIMER			0x1124
-
-/*
- * INT_TIMER_CFG:
- */
-#define INT_TIMER_CFG			0x1128
-
-/*
- * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
- */
-#define INT_TIMER_EN			0x112c
-
-/*
- * CH_IDLE_STA: channel idle time
- */
-#define CH_IDLE_STA			0x1130
-
-/*
- * CH_BUSY_STA: channel busy time
- */
-#define CH_BUSY_STA			0x1134
-
-/*
- * MAC_STATUS_CFG:
- * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
- *	if 1 or higher one of the 2 registers is busy.
- */
-#define MAC_STATUS_CFG			0x1200
-#define MAC_STATUS_CFG_BBP_RF_BUSY	FIELD32(0x00000003)
-
-/*
- * PWR_PIN_CFG:
- */
-#define PWR_PIN_CFG			0x1204
-
-/*
- * AUTOWAKEUP_CFG: Manual power control / status register
- * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
- * AUTOWAKE: 0:sleep, 1:awake
- */
-#define AUTOWAKEUP_CFG			0x1208
-#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME	FIELD32(0x000000ff)
-#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE	FIELD32(0x00007f00)
-#define AUTOWAKEUP_CFG_AUTOWAKE		FIELD32(0x00008000)
-
-/*
- * EDCA_AC0_CFG:
- */
-#define EDCA_AC0_CFG			0x1300
-#define EDCA_AC0_CFG_TX_OP		FIELD32(0x000000ff)
-#define EDCA_AC0_CFG_AIFSN		FIELD32(0x00000f00)
-#define EDCA_AC0_CFG_CWMIN		FIELD32(0x0000f000)
-#define EDCA_AC0_CFG_CWMAX		FIELD32(0x000f0000)
-
-/*
- * EDCA_AC1_CFG:
- */
-#define EDCA_AC1_CFG			0x1304
-#define EDCA_AC1_CFG_TX_OP		FIELD32(0x000000ff)
-#define EDCA_AC1_CFG_AIFSN		FIELD32(0x00000f00)
-#define EDCA_AC1_CFG_CWMIN		FIELD32(0x0000f000)
-#define EDCA_AC1_CFG_CWMAX		FIELD32(0x000f0000)
-
-/*
- * EDCA_AC2_CFG:
- */
-#define EDCA_AC2_CFG			0x1308
-#define EDCA_AC2_CFG_TX_OP		FIELD32(0x000000ff)
-#define EDCA_AC2_CFG_AIFSN		FIELD32(0x00000f00)
-#define EDCA_AC2_CFG_CWMIN		FIELD32(0x0000f000)
-#define EDCA_AC2_CFG_CWMAX		FIELD32(0x000f0000)
-
-/*
- * EDCA_AC3_CFG:
- */
-#define EDCA_AC3_CFG			0x130c
-#define EDCA_AC3_CFG_TX_OP		FIELD32(0x000000ff)
-#define EDCA_AC3_CFG_AIFSN		FIELD32(0x00000f00)
-#define EDCA_AC3_CFG_CWMIN		FIELD32(0x0000f000)
-#define EDCA_AC3_CFG_CWMAX		FIELD32(0x000f0000)
-
-/*
- * EDCA_TID_AC_MAP:
- */
-#define EDCA_TID_AC_MAP			0x1310
-
-/*
- * TX_PWR_CFG_0:
- */
-#define TX_PWR_CFG_0			0x1314
-#define TX_PWR_CFG_0_1MBS		FIELD32(0x0000000f)
-#define TX_PWR_CFG_0_2MBS		FIELD32(0x000000f0)
-#define TX_PWR_CFG_0_55MBS		FIELD32(0x00000f00)
-#define TX_PWR_CFG_0_11MBS		FIELD32(0x0000f000)
-#define TX_PWR_CFG_0_6MBS		FIELD32(0x000f0000)
-#define TX_PWR_CFG_0_9MBS		FIELD32(0x00f00000)
-#define TX_PWR_CFG_0_12MBS		FIELD32(0x0f000000)
-#define TX_PWR_CFG_0_18MBS		FIELD32(0xf0000000)
-
-/*
- * TX_PWR_CFG_1:
- */
-#define TX_PWR_CFG_1			0x1318
-#define TX_PWR_CFG_1_24MBS		FIELD32(0x0000000f)
-#define TX_PWR_CFG_1_36MBS		FIELD32(0x000000f0)
-#define TX_PWR_CFG_1_48MBS		FIELD32(0x00000f00)
-#define TX_PWR_CFG_1_54MBS		FIELD32(0x0000f000)
-#define TX_PWR_CFG_1_MCS0		FIELD32(0x000f0000)
-#define TX_PWR_CFG_1_MCS1		FIELD32(0x00f00000)
-#define TX_PWR_CFG_1_MCS2		FIELD32(0x0f000000)
-#define TX_PWR_CFG_1_MCS3		FIELD32(0xf0000000)
-
-/*
- * TX_PWR_CFG_2:
- */
-#define TX_PWR_CFG_2			0x131c
-#define TX_PWR_CFG_2_MCS4		FIELD32(0x0000000f)
-#define TX_PWR_CFG_2_MCS5		FIELD32(0x000000f0)
-#define TX_PWR_CFG_2_MCS6		FIELD32(0x00000f00)
-#define TX_PWR_CFG_2_MCS7		FIELD32(0x0000f000)
-#define TX_PWR_CFG_2_MCS8		FIELD32(0x000f0000)
-#define TX_PWR_CFG_2_MCS9		FIELD32(0x00f00000)
-#define TX_PWR_CFG_2_MCS10		FIELD32(0x0f000000)
-#define TX_PWR_CFG_2_MCS11		FIELD32(0xf0000000)
-
-/*
- * TX_PWR_CFG_3:
- */
-#define TX_PWR_CFG_3			0x1320
-#define TX_PWR_CFG_3_MCS12		FIELD32(0x0000000f)
-#define TX_PWR_CFG_3_MCS13		FIELD32(0x000000f0)
-#define TX_PWR_CFG_3_MCS14		FIELD32(0x00000f00)
-#define TX_PWR_CFG_3_MCS15		FIELD32(0x0000f000)
-#define TX_PWR_CFG_3_UKNOWN1		FIELD32(0x000f0000)
-#define TX_PWR_CFG_3_UKNOWN2		FIELD32(0x00f00000)
-#define TX_PWR_CFG_3_UKNOWN3		FIELD32(0x0f000000)
-#define TX_PWR_CFG_3_UKNOWN4		FIELD32(0xf0000000)
-
-/*
- * TX_PWR_CFG_4:
- */
-#define TX_PWR_CFG_4			0x1324
-#define TX_PWR_CFG_4_UKNOWN5		FIELD32(0x0000000f)
-#define TX_PWR_CFG_4_UKNOWN6		FIELD32(0x000000f0)
-#define TX_PWR_CFG_4_UKNOWN7		FIELD32(0x00000f00)
-#define TX_PWR_CFG_4_UKNOWN8		FIELD32(0x0000f000)
-
-/*
- * TX_PIN_CFG:
- */
-#define TX_PIN_CFG			0x1328
-#define TX_PIN_CFG_PA_PE_A0_EN		FIELD32(0x00000001)
-#define TX_PIN_CFG_PA_PE_G0_EN		FIELD32(0x00000002)
-#define TX_PIN_CFG_PA_PE_A1_EN		FIELD32(0x00000004)
-#define TX_PIN_CFG_PA_PE_G1_EN		FIELD32(0x00000008)
-#define TX_PIN_CFG_PA_PE_A0_POL		FIELD32(0x00000010)
-#define TX_PIN_CFG_PA_PE_G0_POL		FIELD32(0x00000020)
-#define TX_PIN_CFG_PA_PE_A1_POL		FIELD32(0x00000040)
-#define TX_PIN_CFG_PA_PE_G1_POL		FIELD32(0x00000080)
-#define TX_PIN_CFG_LNA_PE_A0_EN		FIELD32(0x00000100)
-#define TX_PIN_CFG_LNA_PE_G0_EN		FIELD32(0x00000200)
-#define TX_PIN_CFG_LNA_PE_A1_EN		FIELD32(0x00000400)
-#define TX_PIN_CFG_LNA_PE_G1_EN		FIELD32(0x00000800)
-#define TX_PIN_CFG_LNA_PE_A0_POL	FIELD32(0x00001000)
-#define TX_PIN_CFG_LNA_PE_G0_POL	FIELD32(0x00002000)
-#define TX_PIN_CFG_LNA_PE_A1_POL	FIELD32(0x00004000)
-#define TX_PIN_CFG_LNA_PE_G1_POL	FIELD32(0x00008000)
-#define TX_PIN_CFG_RFTR_EN		FIELD32(0x00010000)
-#define TX_PIN_CFG_RFTR_POL		FIELD32(0x00020000)
-#define TX_PIN_CFG_TRSW_EN		FIELD32(0x00040000)
-#define TX_PIN_CFG_TRSW_POL		FIELD32(0x00080000)
-
-/*
- * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
- */
-#define TX_BAND_CFG			0x132c
-#define TX_BAND_CFG_HT40_PLUS		FIELD32(0x00000001)
-#define TX_BAND_CFG_A			FIELD32(0x00000002)
-#define TX_BAND_CFG_BG			FIELD32(0x00000004)
-
-/*
- * TX_SW_CFG0:
- */
-#define TX_SW_CFG0			0x1330
-
-/*
- * TX_SW_CFG1:
- */
-#define TX_SW_CFG1			0x1334
-
-/*
- * TX_SW_CFG2:
- */
-#define TX_SW_CFG2			0x1338
-
-/*
- * TXOP_THRES_CFG:
- */
-#define TXOP_THRES_CFG			0x133c
-
-/*
- * TXOP_CTRL_CFG:
- */
-#define TXOP_CTRL_CFG			0x1340
-
-/*
- * TX_RTS_CFG:
- * RTS_THRES: unit:byte
- * RTS_FBK_EN: enable rts rate fallback
- */
-#define TX_RTS_CFG			0x1344
-#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT	FIELD32(0x000000ff)
-#define TX_RTS_CFG_RTS_THRES		FIELD32(0x00ffff00)
-#define TX_RTS_CFG_RTS_FBK_EN		FIELD32(0x01000000)
-
-/*
- * TX_TIMEOUT_CFG:
- * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
- * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
- * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
- *                it is recommended that:
- *                (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
- */
-#define TX_TIMEOUT_CFG			0x1348
-#define TX_TIMEOUT_CFG_MPDU_LIFETIME	FIELD32(0x000000f0)
-#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT	FIELD32(0x0000ff00)
-#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT	FIELD32(0x00ff0000)
-
-/*
- * TX_RTY_CFG:
- * SHORT_RTY_LIMIT: short retry limit
- * LONG_RTY_LIMIT: long retry limit
- * LONG_RTY_THRE: Long retry threshoold
- * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
- *                   0:expired by retry limit, 1: expired by mpdu life timer
- * AGG_RTY_MODE: Aggregate MPDU retry mode
- *               0:expired by retry limit, 1: expired by mpdu life timer
- * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
- */
-#define TX_RTY_CFG			0x134c
-#define TX_RTY_CFG_SHORT_RTY_LIMIT	FIELD32(0x000000ff)
-#define TX_RTY_CFG_LONG_RTY_LIMIT	FIELD32(0x0000ff00)
-#define TX_RTY_CFG_LONG_RTY_THRE	FIELD32(0x0fff0000)
-#define TX_RTY_CFG_NON_AGG_RTY_MODE	FIELD32(0x10000000)
-#define TX_RTY_CFG_AGG_RTY_MODE		FIELD32(0x20000000)
-#define TX_RTY_CFG_TX_AUTO_FB_ENABLE	FIELD32(0x40000000)
-
-/*
- * TX_LINK_CFG:
- * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
- * MFB_ENABLE: TX apply remote MFB 1:enable
- * REMOTE_UMFS_ENABLE: remote unsolicit  MFB enable
- *                     0: not apply remote remote unsolicit (MFS=7)
- * TX_MRQ_EN: MCS request TX enable
- * TX_RDG_EN: RDG TX enable
- * TX_CF_ACK_EN: Piggyback CF-ACK enable
- * REMOTE_MFB: remote MCS feedback
- * REMOTE_MFS: remote MCS feedback sequence number
- */
-#define TX_LINK_CFG			0x1350
-#define TX_LINK_CFG_REMOTE_MFB_LIFETIME	FIELD32(0x000000ff)
-#define TX_LINK_CFG_MFB_ENABLE		FIELD32(0x00000100)
-#define TX_LINK_CFG_REMOTE_UMFS_ENABLE	FIELD32(0x00000200)
-#define TX_LINK_CFG_TX_MRQ_EN		FIELD32(0x00000400)
-#define TX_LINK_CFG_TX_RDG_EN		FIELD32(0x00000800)
-#define TX_LINK_CFG_TX_CF_ACK_EN	FIELD32(0x00001000)
-#define TX_LINK_CFG_REMOTE_MFB		FIELD32(0x00ff0000)
-#define TX_LINK_CFG_REMOTE_MFS		FIELD32(0xff000000)
-
-/*
- * HT_FBK_CFG0:
- */
-#define HT_FBK_CFG0			0x1354
-#define HT_FBK_CFG0_HTMCS0FBK		FIELD32(0x0000000f)
-#define HT_FBK_CFG0_HTMCS1FBK		FIELD32(0x000000f0)
-#define HT_FBK_CFG0_HTMCS2FBK		FIELD32(0x00000f00)
-#define HT_FBK_CFG0_HTMCS3FBK		FIELD32(0x0000f000)
-#define HT_FBK_CFG0_HTMCS4FBK		FIELD32(0x000f0000)
-#define HT_FBK_CFG0_HTMCS5FBK		FIELD32(0x00f00000)
-#define HT_FBK_CFG0_HTMCS6FBK		FIELD32(0x0f000000)
-#define HT_FBK_CFG0_HTMCS7FBK		FIELD32(0xf0000000)
-
-/*
- * HT_FBK_CFG1:
- */
-#define HT_FBK_CFG1			0x1358
-#define HT_FBK_CFG1_HTMCS8FBK		FIELD32(0x0000000f)
-#define HT_FBK_CFG1_HTMCS9FBK		FIELD32(0x000000f0)
-#define HT_FBK_CFG1_HTMCS10FBK		FIELD32(0x00000f00)
-#define HT_FBK_CFG1_HTMCS11FBK		FIELD32(0x0000f000)
-#define HT_FBK_CFG1_HTMCS12FBK		FIELD32(0x000f0000)
-#define HT_FBK_CFG1_HTMCS13FBK		FIELD32(0x00f00000)
-#define HT_FBK_CFG1_HTMCS14FBK		FIELD32(0x0f000000)
-#define HT_FBK_CFG1_HTMCS15FBK		FIELD32(0xf0000000)
-
-/*
- * LG_FBK_CFG0:
- */
-#define LG_FBK_CFG0			0x135c
-#define LG_FBK_CFG0_OFDMMCS0FBK		FIELD32(0x0000000f)
-#define LG_FBK_CFG0_OFDMMCS1FBK		FIELD32(0x000000f0)
-#define LG_FBK_CFG0_OFDMMCS2FBK		FIELD32(0x00000f00)
-#define LG_FBK_CFG0_OFDMMCS3FBK		FIELD32(0x0000f000)
-#define LG_FBK_CFG0_OFDMMCS4FBK		FIELD32(0x000f0000)
-#define LG_FBK_CFG0_OFDMMCS5FBK		FIELD32(0x00f00000)
-#define LG_FBK_CFG0_OFDMMCS6FBK		FIELD32(0x0f000000)
-#define LG_FBK_CFG0_OFDMMCS7FBK		FIELD32(0xf0000000)
-
-/*
- * LG_FBK_CFG1:
- */
-#define LG_FBK_CFG1			0x1360
-#define LG_FBK_CFG0_CCKMCS0FBK		FIELD32(0x0000000f)
-#define LG_FBK_CFG0_CCKMCS1FBK		FIELD32(0x000000f0)
-#define LG_FBK_CFG0_CCKMCS2FBK		FIELD32(0x00000f00)
-#define LG_FBK_CFG0_CCKMCS3FBK		FIELD32(0x0000f000)
-
-/*
- * CCK_PROT_CFG: CCK Protection
- * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
- * PROTECT_CTRL: Protection control frame type for CCK TX
- *               0:none, 1:RTS/CTS, 2:CTS-to-self
- * PROTECT_NAV: TXOP protection type for CCK TX
- *              0:none, 1:ShortNAVprotect, 2:LongNAVProtect
- * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
- * RTS_TH_EN: RTS threshold enable on CCK TX
- */
-#define CCK_PROT_CFG			0x1364
-#define CCK_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define CCK_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define CCK_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define CCK_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * OFDM_PROT_CFG: OFDM Protection
- */
-#define OFDM_PROT_CFG			0x1368
-#define OFDM_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define OFDM_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define OFDM_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define OFDM_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * MM20_PROT_CFG: MM20 Protection
- */
-#define MM20_PROT_CFG			0x136c
-#define MM20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define MM20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define MM20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define MM20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * MM40_PROT_CFG: MM40 Protection
- */
-#define MM40_PROT_CFG			0x1370
-#define MM40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define MM40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define MM40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define MM40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * GF20_PROT_CFG: GF20 Protection
- */
-#define GF20_PROT_CFG			0x1374
-#define GF20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define GF20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define GF20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define GF20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * GF40_PROT_CFG: GF40 Protection
- */
-#define GF40_PROT_CFG			0x1378
-#define GF40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define GF40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define GF40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define GF40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * EXP_CTS_TIME:
- */
-#define EXP_CTS_TIME			0x137c
-
-/*
- * EXP_ACK_TIME:
- */
-#define EXP_ACK_TIME			0x1380
-
-/*
- * RX_FILTER_CFG: RX configuration register.
- */
-#define RX_FILTER_CFG			0x1400
-#define RX_FILTER_CFG_DROP_CRC_ERROR	FIELD32(0x00000001)
-#define RX_FILTER_CFG_DROP_PHY_ERROR	FIELD32(0x00000002)
-#define RX_FILTER_CFG_DROP_NOT_TO_ME	FIELD32(0x00000004)
-#define RX_FILTER_CFG_DROP_NOT_MY_BSSD	FIELD32(0x00000008)
-#define RX_FILTER_CFG_DROP_VER_ERROR	FIELD32(0x00000010)
-#define RX_FILTER_CFG_DROP_MULTICAST	FIELD32(0x00000020)
-#define RX_FILTER_CFG_DROP_BROADCAST	FIELD32(0x00000040)
-#define RX_FILTER_CFG_DROP_DUPLICATE	FIELD32(0x00000080)
-#define RX_FILTER_CFG_DROP_CF_END_ACK	FIELD32(0x00000100)
-#define RX_FILTER_CFG_DROP_CF_END	FIELD32(0x00000200)
-#define RX_FILTER_CFG_DROP_ACK		FIELD32(0x00000400)
-#define RX_FILTER_CFG_DROP_CTS		FIELD32(0x00000800)
-#define RX_FILTER_CFG_DROP_RTS		FIELD32(0x00001000)
-#define RX_FILTER_CFG_DROP_PSPOLL	FIELD32(0x00002000)
-#define RX_FILTER_CFG_DROP_BA		FIELD32(0x00004000)
-#define RX_FILTER_CFG_DROP_BAR		FIELD32(0x00008000)
-#define RX_FILTER_CFG_DROP_CNTL		FIELD32(0x00010000)
-
-/*
- * AUTO_RSP_CFG:
- * AUTORESPONDER: 0: disable, 1: enable
- * BAC_ACK_POLICY: 0:long, 1:short preamble
- * CTS_40_MMODE: Response CTS 40MHz duplicate mode
- * CTS_40_MREF: Response CTS 40MHz duplicate mode
- * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
- * DUAL_CTS_EN: Power bit value in control frame
- * ACK_CTS_PSM_BIT:Power bit value in control frame
- */
-#define AUTO_RSP_CFG			0x1404
-#define AUTO_RSP_CFG_AUTORESPONDER	FIELD32(0x00000001)
-#define AUTO_RSP_CFG_BAC_ACK_POLICY	FIELD32(0x00000002)
-#define AUTO_RSP_CFG_CTS_40_MMODE	FIELD32(0x00000004)
-#define AUTO_RSP_CFG_CTS_40_MREF	FIELD32(0x00000008)
-#define AUTO_RSP_CFG_AR_PREAMBLE	FIELD32(0x00000010)
-#define AUTO_RSP_CFG_DUAL_CTS_EN	FIELD32(0x00000040)
-#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT	FIELD32(0x00000080)
-
-/*
- * LEGACY_BASIC_RATE:
- */
-#define LEGACY_BASIC_RATE		0x1408
-
-/*
- * HT_BASIC_RATE:
- */
-#define HT_BASIC_RATE			0x140c
-
-/*
- * HT_CTRL_CFG:
- */
-#define HT_CTRL_CFG			0x1410
-
-/*
- * SIFS_COST_CFG:
- */
-#define SIFS_COST_CFG			0x1414
-
-/*
- * RX_PARSER_CFG:
- * Set NAV for all received frames
- */
-#define RX_PARSER_CFG			0x1418
-
-/*
- * TX_SEC_CNT0:
- */
-#define TX_SEC_CNT0			0x1500
-
-/*
- * RX_SEC_CNT0:
- */
-#define RX_SEC_CNT0			0x1504
-
-/*
- * CCMP_FC_MUTE:
- */
-#define CCMP_FC_MUTE			0x1508
-
-/*
- * TXOP_HLDR_ADDR0:
- */
-#define TXOP_HLDR_ADDR0			0x1600
-
-/*
- * TXOP_HLDR_ADDR1:
- */
-#define TXOP_HLDR_ADDR1			0x1604
-
-/*
- * TXOP_HLDR_ET:
- */
-#define TXOP_HLDR_ET			0x1608
-
-/*
- * QOS_CFPOLL_RA_DW0:
- */
-#define QOS_CFPOLL_RA_DW0		0x160c
-
-/*
- * QOS_CFPOLL_RA_DW1:
- */
-#define QOS_CFPOLL_RA_DW1		0x1610
-
-/*
- * QOS_CFPOLL_QC:
- */
-#define QOS_CFPOLL_QC			0x1614
-
-/*
- * RX_STA_CNT0: RX PLCP error count & RX CRC error count
- */
-#define RX_STA_CNT0			0x1700
-#define RX_STA_CNT0_CRC_ERR		FIELD32(0x0000ffff)
-#define RX_STA_CNT0_PHY_ERR		FIELD32(0xffff0000)
-
-/*
- * RX_STA_CNT1: RX False CCA count & RX LONG frame count
- */
-#define RX_STA_CNT1			0x1704
-#define RX_STA_CNT1_FALSE_CCA		FIELD32(0x0000ffff)
-#define RX_STA_CNT1_PLCP_ERR		FIELD32(0xffff0000)
-
-/*
- * RX_STA_CNT2:
- */
-#define RX_STA_CNT2			0x1708
-#define RX_STA_CNT2_RX_DUPLI_COUNT	FIELD32(0x0000ffff)
-#define RX_STA_CNT2_RX_FIFO_OVERFLOW	FIELD32(0xffff0000)
-
-/*
- * TX_STA_CNT0: TX Beacon count
- */
-#define TX_STA_CNT0			0x170c
-#define TX_STA_CNT0_TX_FAIL_COUNT	FIELD32(0x0000ffff)
-#define TX_STA_CNT0_TX_BEACON_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_STA_CNT1: TX tx count
- */
-#define TX_STA_CNT1			0x1710
-#define TX_STA_CNT1_TX_SUCCESS		FIELD32(0x0000ffff)
-#define TX_STA_CNT1_TX_RETRANSMIT	FIELD32(0xffff0000)
-
-/*
- * TX_STA_CNT2: TX tx count
- */
-#define TX_STA_CNT2			0x1714
-#define TX_STA_CNT2_TX_ZERO_LEN_COUNT	FIELD32(0x0000ffff)
-#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_STA_FIFO: TX Result for specific PID status fifo register
- */
-#define TX_STA_FIFO			0x1718
-#define TX_STA_FIFO_VALID		FIELD32(0x00000001)
-#define TX_STA_FIFO_PID_TYPE		FIELD32(0x0000001e)
-#define TX_STA_FIFO_TX_SUCCESS		FIELD32(0x00000020)
-#define TX_STA_FIFO_TX_AGGRE		FIELD32(0x00000040)
-#define TX_STA_FIFO_TX_ACK_REQUIRED	FIELD32(0x00000080)
-#define TX_STA_FIFO_WCID		FIELD32(0x0000ff00)
-#define TX_STA_FIFO_MCS			FIELD32(0x007f0000)
-#define TX_STA_FIFO_PHYMODE		FIELD32(0xc0000000)
-
-/*
- * TX_AGG_CNT: Debug counter
- */
-#define TX_AGG_CNT			0x171c
-#define TX_AGG_CNT_NON_AGG_TX_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT_AGG_TX_COUNT		FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT0:
- */
-#define TX_AGG_CNT0			0x1720
-#define TX_AGG_CNT0_AGG_SIZE_1_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT0_AGG_SIZE_2_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT1:
- */
-#define TX_AGG_CNT1			0x1724
-#define TX_AGG_CNT1_AGG_SIZE_3_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT1_AGG_SIZE_4_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT2:
- */
-#define TX_AGG_CNT2			0x1728
-#define TX_AGG_CNT2_AGG_SIZE_5_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT2_AGG_SIZE_6_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT3:
- */
-#define TX_AGG_CNT3			0x172c
-#define TX_AGG_CNT3_AGG_SIZE_7_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT3_AGG_SIZE_8_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT4:
- */
-#define TX_AGG_CNT4			0x1730
-#define TX_AGG_CNT4_AGG_SIZE_9_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT4_AGG_SIZE_10_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT5:
- */
-#define TX_AGG_CNT5			0x1734
-#define TX_AGG_CNT5_AGG_SIZE_11_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT5_AGG_SIZE_12_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT6:
- */
-#define TX_AGG_CNT6			0x1738
-#define TX_AGG_CNT6_AGG_SIZE_13_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT6_AGG_SIZE_14_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT7:
- */
-#define TX_AGG_CNT7			0x173c
-#define TX_AGG_CNT7_AGG_SIZE_15_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT7_AGG_SIZE_16_COUNT	FIELD32(0xffff0000)
-
-/*
- * MPDU_DENSITY_CNT:
- * TX_ZERO_DEL: TX zero length delimiter count
- * RX_ZERO_DEL: RX zero length delimiter count
- */
-#define MPDU_DENSITY_CNT		0x1740
-#define MPDU_DENSITY_CNT_TX_ZERO_DEL	FIELD32(0x0000ffff)
-#define MPDU_DENSITY_CNT_RX_ZERO_DEL	FIELD32(0xffff0000)
-
-/*
- * Security key table memory.
- * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
- * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
- * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
- * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
- * SHARED_KEY_TABLE_BASE: 32 bytes * 32-entry
- * SHARED_KEY_MODE_BASE: 4 bits * 32-entry
- */
-#define MAC_WCID_BASE			0x1800
-#define PAIRWISE_KEY_TABLE_BASE		0x4000
-#define MAC_IVEIV_TABLE_BASE		0x6000
-#define MAC_WCID_ATTRIBUTE_BASE		0x6800
-#define SHARED_KEY_TABLE_BASE		0x6c00
-#define SHARED_KEY_MODE_BASE		0x7000
-
-#define MAC_WCID_ENTRY(__idx) \
-	( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
-#define PAIRWISE_KEY_ENTRY(__idx) \
-	( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
-#define MAC_IVEIV_ENTRY(__idx) \
-	( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
-#define MAC_WCID_ATTR_ENTRY(__idx) \
-	( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
-#define SHARED_KEY_ENTRY(__idx) \
-	( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
-#define SHARED_KEY_MODE_ENTRY(__idx) \
-	( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
-
-struct mac_wcid_entry {
-	u8 mac[6];
-	u8 reserved[2];
-} __attribute__ ((packed));
-
-struct hw_key_entry {
-	u8 key[16];
-	u8 tx_mic[8];
-	u8 rx_mic[8];
-} __attribute__ ((packed));
-
-struct mac_iveiv_entry {
-	u8 iv[8];
-} __attribute__ ((packed));
-
-/*
- * MAC_WCID_ATTRIBUTE:
- */
-#define MAC_WCID_ATTRIBUTE_KEYTAB	FIELD32(0x00000001)
-#define MAC_WCID_ATTRIBUTE_CIPHER	FIELD32(0x0000000e)
-#define MAC_WCID_ATTRIBUTE_BSS_IDX	FIELD32(0x00000070)
-#define MAC_WCID_ATTRIBUTE_RX_WIUDF	FIELD32(0x00000380)
-
-/*
- * SHARED_KEY_MODE:
- */
-#define SHARED_KEY_MODE_BSS0_KEY0	FIELD32(0x00000007)
-#define SHARED_KEY_MODE_BSS0_KEY1	FIELD32(0x00000070)
-#define SHARED_KEY_MODE_BSS0_KEY2	FIELD32(0x00000700)
-#define SHARED_KEY_MODE_BSS0_KEY3	FIELD32(0x00007000)
-#define SHARED_KEY_MODE_BSS1_KEY0	FIELD32(0x00070000)
-#define SHARED_KEY_MODE_BSS1_KEY1	FIELD32(0x00700000)
-#define SHARED_KEY_MODE_BSS1_KEY2	FIELD32(0x07000000)
-#define SHARED_KEY_MODE_BSS1_KEY3	FIELD32(0x70000000)
-
-/*
- * HOST-MCU communication
- */
-
-/*
- * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
- */
-#define H2M_MAILBOX_CSR			0x7010
-#define H2M_MAILBOX_CSR_ARG0		FIELD32(0x000000ff)
-#define H2M_MAILBOX_CSR_ARG1		FIELD32(0x0000ff00)
-#define H2M_MAILBOX_CSR_CMD_TOKEN	FIELD32(0x00ff0000)
-#define H2M_MAILBOX_CSR_OWNER		FIELD32(0xff000000)
-
-/*
- * H2M_MAILBOX_CID:
- */
-#define H2M_MAILBOX_CID			0x7014
-#define H2M_MAILBOX_CID_CMD0		FIELD32(0x000000ff)
-#define H2M_MAILBOX_CID_CMD1		FIELD32(0x0000ff00)
-#define H2M_MAILBOX_CID_CMD2		FIELD32(0x00ff0000)
-#define H2M_MAILBOX_CID_CMD3		FIELD32(0xff000000)
-
-/*
- * H2M_MAILBOX_STATUS:
- */
-#define H2M_MAILBOX_STATUS		0x701c
-
-/*
- * H2M_INT_SRC:
- */
-#define H2M_INT_SRC			0x7024
-
-/*
- * H2M_BBP_AGENT:
- */
-#define H2M_BBP_AGENT			0x7028
-
-/*
- * MCU_LEDCS: LED control for MCU Mailbox.
- */
-#define MCU_LEDCS_LED_MODE		FIELD8(0x1f)
-#define MCU_LEDCS_POLARITY		FIELD8(0x01)
-
-/*
- * HW_CS_CTS_BASE:
- * Carrier-sense CTS frame base address.
- * It's where mac stores carrier-sense frame for carrier-sense function.
- */
-#define HW_CS_CTS_BASE			0x7700
-
-/*
- * HW_DFS_CTS_BASE:
- * FS CTS frame base address. It's where mac stores CTS frame for DFS.
- */
-#define HW_DFS_CTS_BASE			0x7780
-
-/*
- * TXRX control registers - base address 0x3000
- */
-
-/*
- * TXRX_CSR1:
- * rt2860b  UNKNOWN reg use R/O Reg Addr 0x77d0 first..
- */
-#define TXRX_CSR1			0x77d0
-
-/*
- * HW_DEBUG_SETTING_BASE:
- * since NULL frame won't be that long (256 byte)
- * We steal 16 tail bytes to save debugging settings
- */
-#define HW_DEBUG_SETTING_BASE		0x77f0
-#define HW_DEBUG_SETTING_BASE2		0x7770
-
-/*
- * HW_BEACON_BASE
- * In order to support maximum 8 MBSS and its maximum length
- * is 512 bytes for each beacon
- * Three section discontinue memory segments will be used.
- * 1. The original region for BCN 0~3
- * 2. Extract memory from FCE table for BCN 4~5
- * 3. Extract memory from Pair-wise key table for BCN 6~7
- *    It occupied those memory of wcid 238~253 for BCN 6
- *    and wcid 222~237 for BCN 7
- *
- * IMPORTANT NOTE: Not sure why legacy driver does this,
- * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
- */
-#define HW_BEACON_BASE0			0x7800
-#define HW_BEACON_BASE1			0x7a00
-#define HW_BEACON_BASE2			0x7c00
-#define HW_BEACON_BASE3			0x7e00
-#define HW_BEACON_BASE4			0x7200
-#define HW_BEACON_BASE5			0x7400
-#define HW_BEACON_BASE6			0x5dc0
-#define HW_BEACON_BASE7			0x5bc0
-
-#define HW_BEACON_OFFSET(__index) \
-	( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
-	  (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
-	  (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
-
-/*
  * 8051 firmware image.
  */
 #define FIRMWARE_RT2860			"rt2860.bin"
 #define FIRMWARE_IMAGE_BASE		0x2000
 
 /*
- * BBP registers.
- * The wordsize of the BBP is 8 bits.
- */
-
-/*
- * BBP 1: TX Antenna
- */
-#define BBP1_TX_POWER			FIELD8(0x07)
-#define BBP1_TX_ANTENNA			FIELD8(0x18)
-
-/*
- * BBP 3: RX Antenna
- */
-#define BBP3_RX_ANTENNA			FIELD8(0x18)
-#define BBP3_HT40_PLUS			FIELD8(0x20)
-
-/*
- * BBP 4: Bandwidth
- */
-#define BBP4_TX_BF			FIELD8(0x01)
-#define BBP4_BANDWIDTH			FIELD8(0x18)
-
-/*
- * RFCSR registers
- * The wordsize of the RFCSR is 8 bits.
- */
-
-/*
- * RFCSR 6:
- */
-#define RFCSR6_R			FIELD8(0x03)
-
-/*
- * RFCSR 7:
- */
-#define RFCSR7_RF_TUNING		FIELD8(0x01)
-
-/*
- * RFCSR 12:
- */
-#define RFCSR12_TX_POWER		FIELD8(0x1f)
-
-/*
- * RFCSR 22:
- */
-#define RFCSR22_BASEBAND_LOOPBACK	FIELD8(0x01)
-
-/*
- * RFCSR 23:
- */
-#define RFCSR23_FREQ_OFFSET		FIELD8(0x7f)
-
-/*
- * RFCSR 30:
- */
-#define RFCSR30_RF_CALIBRATION		FIELD8(0x80)
-
-/*
- * RF registers
- */
-
-/*
- * RF 2
- */
-#define RF2_ANTENNA_RX2			FIELD32(0x00000040)
-#define RF2_ANTENNA_TX1			FIELD32(0x00004000)
-#define RF2_ANTENNA_RX1			FIELD32(0x00020000)
-
-/*
- * RF 3
- */
-#define RF3_TXPOWER_G			FIELD32(0x00003e00)
-#define RF3_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000200)
-#define RF3_TXPOWER_A			FIELD32(0x00003c00)
-
-/*
- * RF 4
- */
-#define RF4_TXPOWER_G			FIELD32(0x000007c0)
-#define RF4_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000040)
-#define RF4_TXPOWER_A			FIELD32(0x00000780)
-#define RF4_FREQ_OFFSET			FIELD32(0x001f8000)
-#define RF4_HT40			FIELD32(0x00200000)
-
-/*
- * EEPROM content.
- * The wordsize of the EEPROM is 16 bits.
- */
-
-/*
- * EEPROM Version
- */
-#define EEPROM_VERSION			0x0001
-#define EEPROM_VERSION_FAE		FIELD16(0x00ff)
-#define EEPROM_VERSION_VERSION		FIELD16(0xff00)
-
-/*
- * HW MAC address.
- */
-#define EEPROM_MAC_ADDR_0		0x0002
-#define EEPROM_MAC_ADDR_BYTE0		FIELD16(0x00ff)
-#define EEPROM_MAC_ADDR_BYTE1		FIELD16(0xff00)
-#define EEPROM_MAC_ADDR_1		0x0003
-#define EEPROM_MAC_ADDR_BYTE2		FIELD16(0x00ff)
-#define EEPROM_MAC_ADDR_BYTE3		FIELD16(0xff00)
-#define EEPROM_MAC_ADDR_2		0x0004
-#define EEPROM_MAC_ADDR_BYTE4		FIELD16(0x00ff)
-#define EEPROM_MAC_ADDR_BYTE5		FIELD16(0xff00)
-
-/*
- * EEPROM ANTENNA config
- * RXPATH: 1: 1R, 2: 2R, 3: 3R
- * TXPATH: 1: 1T, 2: 2T
- */
-#define	EEPROM_ANTENNA			0x001a
-#define EEPROM_ANTENNA_RXPATH		FIELD16(0x000f)
-#define EEPROM_ANTENNA_TXPATH		FIELD16(0x00f0)
-#define EEPROM_ANTENNA_RF_TYPE		FIELD16(0x0f00)
-
-/*
- * EEPROM NIC config
- * CARDBUS_ACCEL: 0 - enable, 1 - disable
- */
-#define	EEPROM_NIC			0x001b
-#define EEPROM_NIC_HW_RADIO		FIELD16(0x0001)
-#define EEPROM_NIC_DYNAMIC_TX_AGC	FIELD16(0x0002)
-#define EEPROM_NIC_EXTERNAL_LNA_BG	FIELD16(0x0004)
-#define EEPROM_NIC_EXTERNAL_LNA_A	FIELD16(0x0008)
-#define EEPROM_NIC_CARDBUS_ACCEL	FIELD16(0x0010)
-#define EEPROM_NIC_BW40M_SB_BG		FIELD16(0x0020)
-#define EEPROM_NIC_BW40M_SB_A		FIELD16(0x0040)
-#define EEPROM_NIC_WPS_PBC		FIELD16(0x0080)
-#define EEPROM_NIC_BW40M_BG		FIELD16(0x0100)
-#define EEPROM_NIC_BW40M_A		FIELD16(0x0200)
-
-/*
- * EEPROM frequency
- */
-#define	EEPROM_FREQ			0x001d
-#define EEPROM_FREQ_OFFSET		FIELD16(0x00ff)
-#define EEPROM_FREQ_LED_MODE		FIELD16(0x7f00)
-#define EEPROM_FREQ_LED_POLARITY	FIELD16(0x1000)
-
-/*
- * EEPROM LED
- * POLARITY_RDY_G: Polarity RDY_G setting.
- * POLARITY_RDY_A: Polarity RDY_A setting.
- * POLARITY_ACT: Polarity ACT setting.
- * POLARITY_GPIO_0: Polarity GPIO0 setting.
- * POLARITY_GPIO_1: Polarity GPIO1 setting.
- * POLARITY_GPIO_2: Polarity GPIO2 setting.
- * POLARITY_GPIO_3: Polarity GPIO3 setting.
- * POLARITY_GPIO_4: Polarity GPIO4 setting.
- * LED_MODE: Led mode.
- */
-#define EEPROM_LED1			0x001e
-#define EEPROM_LED2			0x001f
-#define EEPROM_LED3			0x0020
-#define EEPROM_LED_POLARITY_RDY_BG	FIELD16(0x0001)
-#define EEPROM_LED_POLARITY_RDY_A	FIELD16(0x0002)
-#define EEPROM_LED_POLARITY_ACT		FIELD16(0x0004)
-#define EEPROM_LED_POLARITY_GPIO_0	FIELD16(0x0008)
-#define EEPROM_LED_POLARITY_GPIO_1	FIELD16(0x0010)
-#define EEPROM_LED_POLARITY_GPIO_2	FIELD16(0x0020)
-#define EEPROM_LED_POLARITY_GPIO_3	FIELD16(0x0040)
-#define EEPROM_LED_POLARITY_GPIO_4	FIELD16(0x0080)
-#define EEPROM_LED_LED_MODE		FIELD16(0x1f00)
-
-/*
- * EEPROM LNA
- */
-#define EEPROM_LNA			0x0022
-#define EEPROM_LNA_BG			FIELD16(0x00ff)
-#define EEPROM_LNA_A0			FIELD16(0xff00)
-
-/*
- * EEPROM RSSI BG offset
- */
-#define EEPROM_RSSI_BG			0x0023
-#define EEPROM_RSSI_BG_OFFSET0		FIELD16(0x00ff)
-#define EEPROM_RSSI_BG_OFFSET1		FIELD16(0xff00)
-
-/*
- * EEPROM RSSI BG2 offset
- */
-#define EEPROM_RSSI_BG2			0x0024
-#define EEPROM_RSSI_BG2_OFFSET2		FIELD16(0x00ff)
-#define EEPROM_RSSI_BG2_LNA_A1		FIELD16(0xff00)
-
-/*
- * EEPROM RSSI A offset
- */
-#define EEPROM_RSSI_A			0x0025
-#define EEPROM_RSSI_A_OFFSET0		FIELD16(0x00ff)
-#define EEPROM_RSSI_A_OFFSET1		FIELD16(0xff00)
-
-/*
- * EEPROM RSSI A2 offset
- */
-#define EEPROM_RSSI_A2			0x0026
-#define EEPROM_RSSI_A2_OFFSET2		FIELD16(0x00ff)
-#define EEPROM_RSSI_A2_LNA_A2		FIELD16(0xff00)
-
-/*
- * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
- *	This is delta in 40MHZ.
- * VALUE: Tx Power dalta value (MAX=4)
- * TYPE: 1: Plus the delta value, 0: minus the delta value
- * TXPOWER: Enable:
- */
-#define EEPROM_TXPOWER_DELTA		0x0028
-#define EEPROM_TXPOWER_DELTA_VALUE	FIELD16(0x003f)
-#define EEPROM_TXPOWER_DELTA_TYPE	FIELD16(0x0040)
-#define EEPROM_TXPOWER_DELTA_TXPOWER	FIELD16(0x0080)
-
-/*
- * EEPROM TXPOWER 802.11BG
- */
-#define	EEPROM_TXPOWER_BG1		0x0029
-#define	EEPROM_TXPOWER_BG2		0x0030
-#define EEPROM_TXPOWER_BG_SIZE		7
-#define EEPROM_TXPOWER_BG_1		FIELD16(0x00ff)
-#define EEPROM_TXPOWER_BG_2		FIELD16(0xff00)
-
-/*
- * EEPROM TXPOWER 802.11A
- */
-#define EEPROM_TXPOWER_A1		0x003c
-#define EEPROM_TXPOWER_A2		0x0053
-#define EEPROM_TXPOWER_A_SIZE		6
-#define EEPROM_TXPOWER_A_1		FIELD16(0x00ff)
-#define EEPROM_TXPOWER_A_2		FIELD16(0xff00)
-
-/*
- * EEPROM TXpower byrate: 20MHZ power
- */
-#define EEPROM_TXPOWER_BYRATE		0x006f
-
-/*
- * EEPROM BBP.
- */
-#define	EEPROM_BBP_START		0x0078
-#define EEPROM_BBP_SIZE			16
-#define EEPROM_BBP_VALUE		FIELD16(0x00ff)
-#define EEPROM_BBP_REG_ID		FIELD16(0xff00)
-
-/*
- * MCU mailbox commands.
- */
-#define MCU_SLEEP			0x30
-#define MCU_WAKEUP			0x31
-#define MCU_RADIO_OFF			0x35
-#define MCU_CURRENT			0x36
-#define MCU_LED				0x50
-#define MCU_LED_STRENGTH		0x51
-#define MCU_LED_1			0x52
-#define MCU_LED_2			0x53
-#define MCU_LED_3			0x54
-#define MCU_RADAR			0x60
-#define MCU_BOOT_SIGNAL			0x72
-#define MCU_BBP_SIGNAL			0x80
-#define MCU_POWER_SAVE			0x83
-
-/*
- * MCU mailbox tokens
- */
-#define TOKEN_WAKUP			3
-
-/*
  * DMA descriptor defines.
  */
 #define TXD_DESC_SIZE			( 4 * sizeof(__le32) )
-#define TXWI_DESC_SIZE			( 4 * sizeof(__le32) )
 #define RXD_DESC_SIZE			( 4 * sizeof(__le32) )
-#define RXWI_DESC_SIZE			( 4 * sizeof(__le32) )
 
 /*
  * TX descriptor format for TX, PRIO and Beacon Ring.
@@ -1806,52 +132,6 @@ struct mac_iveiv_entry {
 #define TXD_W3_ICO			FIELD32(0x80000000)
 
 /*
- * TX WI structure
- */
-
-/*
- * Word0
- * FRAG: 1 To inform TKIP engine this is a fragment.
- * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
- * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
- * BW: Channel bandwidth 20MHz or 40 MHz
- * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
- */
-#define TXWI_W0_FRAG			FIELD32(0x00000001)
-#define TXWI_W0_MIMO_PS			FIELD32(0x00000002)
-#define TXWI_W0_CF_ACK			FIELD32(0x00000004)
-#define TXWI_W0_TS			FIELD32(0x00000008)
-#define TXWI_W0_AMPDU			FIELD32(0x00000010)
-#define TXWI_W0_MPDU_DENSITY		FIELD32(0x000000e0)
-#define TXWI_W0_TX_OP			FIELD32(0x00000300)
-#define TXWI_W0_MCS			FIELD32(0x007f0000)
-#define TXWI_W0_BW			FIELD32(0x00800000)
-#define TXWI_W0_SHORT_GI		FIELD32(0x01000000)
-#define TXWI_W0_STBC			FIELD32(0x06000000)
-#define TXWI_W0_IFS			FIELD32(0x08000000)
-#define TXWI_W0_PHYMODE			FIELD32(0xc0000000)
-
-/*
- * Word1
- */
-#define TXWI_W1_ACK			FIELD32(0x00000001)
-#define TXWI_W1_NSEQ			FIELD32(0x00000002)
-#define TXWI_W1_BW_WIN_SIZE		FIELD32(0x000000fc)
-#define TXWI_W1_WIRELESS_CLI_ID		FIELD32(0x0000ff00)
-#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
-#define TXWI_W1_PACKETID		FIELD32(0xf0000000)
-
-/*
- * Word2
- */
-#define TXWI_W2_IV			FIELD32(0xffffffff)
-
-/*
- * Word3
- */
-#define TXWI_W3_EIV			FIELD32(0xffffffff)
-
-/*
  * RX descriptor format for RX Ring.
  */
 
@@ -1897,64 +177,4 @@ struct mac_iveiv_entry {
 #define RXD_W3_PLCP_SIGNAL		FIELD32(0x00020000)
 #define RXD_W3_PLCP_RSSI		FIELD32(0x00040000)
 
-/*
- * RX WI structure
- */
-
-/*
- * Word0
- */
-#define RXWI_W0_WIRELESS_CLI_ID		FIELD32(0x000000ff)
-#define RXWI_W0_KEY_INDEX		FIELD32(0x00000300)
-#define RXWI_W0_BSSID			FIELD32(0x00001c00)
-#define RXWI_W0_UDF			FIELD32(0x0000e000)
-#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
-#define RXWI_W0_TID			FIELD32(0xf0000000)
-
-/*
- * Word1
- */
-#define RXWI_W1_FRAG			FIELD32(0x0000000f)
-#define RXWI_W1_SEQUENCE		FIELD32(0x0000fff0)
-#define RXWI_W1_MCS			FIELD32(0x007f0000)
-#define RXWI_W1_BW			FIELD32(0x00800000)
-#define RXWI_W1_SHORT_GI		FIELD32(0x01000000)
-#define RXWI_W1_STBC			FIELD32(0x06000000)
-#define RXWI_W1_PHYMODE			FIELD32(0xc0000000)
-
-/*
- * Word2
- */
-#define RXWI_W2_RSSI0			FIELD32(0x000000ff)
-#define RXWI_W2_RSSI1			FIELD32(0x0000ff00)
-#define RXWI_W2_RSSI2			FIELD32(0x00ff0000)
-
-/*
- * Word3
- */
-#define RXWI_W3_SNR0			FIELD32(0x000000ff)
-#define RXWI_W3_SNR1			FIELD32(0x0000ff00)
-
-/*
- * Macros for converting txpower from EEPROM to mac80211 value
- * and from mac80211 value to register value.
- */
-#define MIN_G_TXPOWER	0
-#define MIN_A_TXPOWER	-7
-#define MAX_G_TXPOWER	31
-#define MAX_A_TXPOWER	15
-#define DEFAULT_TXPOWER	5
-
-#define TXPOWER_G_FROM_DEV(__txpower) \
-	((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-
-#define TXPOWER_G_TO_DEV(__txpower) \
-	clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
-
-#define TXPOWER_A_FROM_DEV(__txpower) \
-	((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-
-#define TXPOWER_A_TO_DEV(__txpower) \
-	clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
-
 #endif /* RT2800PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 9fe770f7d7b..ce2e893856c 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -34,6 +34,8 @@
 
 #include "rt2x00.h"
 #include "rt2x00usb.h"
+#include "rt2800lib.h"
+#include "rt2800.h"
 #include "rt2800usb.h"
 
 /*
@@ -44,1027 +46,6 @@ module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
 /*
- * Register access.
- * All access to the CSR registers will go through the methods
- * rt2x00usb_register_read and rt2x00usb_register_write.
- * BBP and RF register require indirect register access,
- * and use the CSR registers BBPCSR and RFCSR to achieve this.
- * These indirect registers work with busy bits,
- * and we will try maximal REGISTER_BUSY_COUNT times to access
- * the register while taking a REGISTER_BUSY_DELAY us delay
- * between each attampt. When the busy bit is still set at that time,
- * the access attempt is considered to have failed,
- * and we will print an error.
- * The _lock versions must be used if you already hold the csr_mutex
- */
-#define WAIT_FOR_BBP(__dev, __reg) \
-	rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
-#define WAIT_FOR_RFCSR(__dev, __reg) \
-	rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
-#define WAIT_FOR_RF(__dev, __reg) \
-	rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
-#define WAIT_FOR_MCU(__dev, __reg) \
-	rt2x00usb_regbusy_read((__dev), H2M_MAILBOX_CSR, \
-			       H2M_MAILBOX_CSR_OWNER, (__reg))
-
-static void rt2800usb_bbp_write(struct rt2x00_dev *rt2x00dev,
-				const unsigned int word, const u8 value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the BBP becomes available, afterwards we
-	 * can safely write the new data into the register.
-	 */
-	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
-
-		rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800usb_bbp_read(struct rt2x00_dev *rt2x00dev,
-			       const unsigned int word, u8 *value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the BBP becomes available, afterwards we
-	 * can safely write the read request into the register.
-	 * After the data has been written, we wait until hardware
-	 * returns the correct value, if at any time the register
-	 * doesn't become available in time, reg will be 0xffffffff
-	 * which means we return 0xff to the caller.
-	 */
-	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
-
-		rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
-
-		WAIT_FOR_BBP(rt2x00dev, &reg);
-	}
-
-	*value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev,
-				  const unsigned int word, const u8 value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the RFCSR becomes available, afterwards we
-	 * can safely write the new data into the register.
-	 */
-	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
-
-		rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev,
-				 const unsigned int word, u8 *value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the RFCSR becomes available, afterwards we
-	 * can safely write the read request into the register.
-	 * After the data has been written, we wait until hardware
-	 * returns the correct value, if at any time the register
-	 * doesn't become available in time, reg will be 0xffffffff
-	 * which means we return 0xff to the caller.
-	 */
-	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
-
-		rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
-
-		WAIT_FOR_RFCSR(rt2x00dev, &reg);
-	}
-
-	*value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev,
-			       const unsigned int word, const u32 value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the RF becomes available, afterwards we
-	 * can safely write the new data into the register.
-	 */
-	if (WAIT_FOR_RF(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
-		rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
-		rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
-		rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
-
-		rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
-		rt2x00_rf_write(rt2x00dev, word, value);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev,
-				  const u8 command, const u8 token,
-				  const u8 arg0, const u8 arg1)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the MCU becomes available, afterwards we
-	 * can safely write the new data into the register.
-	 */
-	if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
-		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
-		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
-		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
-		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
-		rt2x00usb_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
-
-		reg = 0;
-		rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
-		rt2x00usb_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-static const struct rt2x00debug rt2800usb_rt2x00debug = {
-	.owner	= THIS_MODULE,
-	.csr	= {
-		.read		= rt2x00usb_register_read,
-		.write		= rt2x00usb_register_write,
-		.flags		= RT2X00DEBUGFS_OFFSET,
-		.word_base	= CSR_REG_BASE,
-		.word_size	= sizeof(u32),
-		.word_count	= CSR_REG_SIZE / sizeof(u32),
-	},
-	.eeprom	= {
-		.read		= rt2x00_eeprom_read,
-		.write		= rt2x00_eeprom_write,
-		.word_base	= EEPROM_BASE,
-		.word_size	= sizeof(u16),
-		.word_count	= EEPROM_SIZE / sizeof(u16),
-	},
-	.bbp	= {
-		.read		= rt2800usb_bbp_read,
-		.write		= rt2800usb_bbp_write,
-		.word_base	= BBP_BASE,
-		.word_size	= sizeof(u8),
-		.word_count	= BBP_SIZE / sizeof(u8),
-	},
-	.rf	= {
-		.read		= rt2x00_rf_read,
-		.write		= rt2800usb_rf_write,
-		.word_base	= RF_BASE,
-		.word_size	= sizeof(u32),
-		.word_count	= RF_SIZE / sizeof(u32),
-	},
-};
-#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-
-static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
-{
-	u32 reg;
-
-	rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
-	return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
-}
-
-#ifdef CONFIG_RT2X00_LIB_LEDS
-static void rt2800usb_brightness_set(struct led_classdev *led_cdev,
-				     enum led_brightness brightness)
-{
-	struct rt2x00_led *led =
-	    container_of(led_cdev, struct rt2x00_led, led_dev);
-	unsigned int enabled = brightness != LED_OFF;
-	unsigned int bg_mode =
-	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
-	unsigned int polarity =
-		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-				   EEPROM_FREQ_LED_POLARITY);
-	unsigned int ledmode =
-		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-				   EEPROM_FREQ_LED_MODE);
-
-	if (led->type == LED_TYPE_RADIO) {
-		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-				      enabled ? 0x20 : 0);
-	} else if (led->type == LED_TYPE_ASSOC) {
-		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-				      enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
-	} else if (led->type == LED_TYPE_QUALITY) {
-		/*
-		 * The brightness is divided into 6 levels (0 - 5),
-		 * The specs tell us the following levels:
-		 *	0, 1 ,3, 7, 15, 31
-		 * to determine the level in a simple way we can simply
-		 * work with bitshifting:
-		 *	(1 << level) - 1
-		 */
-		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
-				      (1 << brightness / (LED_FULL / 6)) - 1,
-				      polarity);
-	}
-}
-
-static int rt2800usb_blink_set(struct led_classdev *led_cdev,
-			       unsigned long *delay_on,
-			       unsigned long *delay_off)
-{
-	struct rt2x00_led *led =
-	    container_of(led_cdev, struct rt2x00_led, led_dev);
-	u32 reg;
-
-	rt2x00usb_register_read(led->rt2x00dev, LED_CFG, &reg);
-	rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, *delay_on);
-	rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
-	rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
-	rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
-	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
-	rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
-	rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
-	rt2x00usb_register_write(led->rt2x00dev, LED_CFG, reg);
-
-	return 0;
-}
-
-static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev,
-			       struct rt2x00_led *led,
-			       enum led_type type)
-{
-	led->rt2x00dev = rt2x00dev;
-	led->type = type;
-	led->led_dev.brightness_set = rt2800usb_brightness_set;
-	led->led_dev.blink_set = rt2800usb_blink_set;
-	led->flags = LED_INITIALIZED;
-}
-#endif /* CONFIG_RT2X00_LIB_LEDS */
-
-/*
- * Configuration handlers.
- */
-static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
-				       struct rt2x00lib_crypto *crypto,
-				       struct ieee80211_key_conf *key)
-{
-	struct mac_wcid_entry wcid_entry;
-	struct mac_iveiv_entry iveiv_entry;
-	u32 offset;
-	u32 reg;
-
-	offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
-
-	rt2x00usb_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
-			   !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
-			   (crypto->cmd == SET_KEY) * crypto->cipher);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
-			   (crypto->cmd == SET_KEY) * crypto->bssidx);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-	rt2x00usb_register_write(rt2x00dev, offset, reg);
-
-	offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
-
-	memset(&iveiv_entry, 0, sizeof(iveiv_entry));
-	if ((crypto->cipher == CIPHER_TKIP) ||
-	    (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
-	    (crypto->cipher == CIPHER_AES))
-		iveiv_entry.iv[3] |= 0x20;
-	iveiv_entry.iv[3] |= key->keyidx << 6;
-	rt2x00usb_register_multiwrite(rt2x00dev, offset,
-				      &iveiv_entry, sizeof(iveiv_entry));
-
-	offset = MAC_WCID_ENTRY(key->hw_key_idx);
-
-	memset(&wcid_entry, 0, sizeof(wcid_entry));
-	if (crypto->cmd == SET_KEY)
-		memcpy(&wcid_entry, crypto->address, ETH_ALEN);
-	rt2x00usb_register_multiwrite(rt2x00dev, offset,
-				      &wcid_entry, sizeof(wcid_entry));
-}
-
-static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
-				       struct rt2x00lib_crypto *crypto,
-				       struct ieee80211_key_conf *key)
-{
-	struct hw_key_entry key_entry;
-	struct rt2x00_field32 field;
-	int timeout;
-	u32 offset;
-	u32 reg;
-
-	if (crypto->cmd == SET_KEY) {
-		key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
-
-		memcpy(key_entry.key, crypto->key,
-		       sizeof(key_entry.key));
-		memcpy(key_entry.tx_mic, crypto->tx_mic,
-		       sizeof(key_entry.tx_mic));
-		memcpy(key_entry.rx_mic, crypto->rx_mic,
-		       sizeof(key_entry.rx_mic));
-
-		offset = SHARED_KEY_ENTRY(key->hw_key_idx);
-		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
-		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-						    USB_VENDOR_REQUEST_OUT,
-						    offset, &key_entry,
-						    sizeof(key_entry),
-						    timeout);
-	}
-
-	/*
-	 * The cipher types are stored over multiple registers
-	 * starting with SHARED_KEY_MODE_BASE each word will have
-	 * 32 bits and contains the cipher types for 2 bssidx each.
-	 * Using the correct defines correctly will cause overhead,
-	 * so just calculate the correct offset.
-	 */
-	field.bit_offset = 4 * (key->hw_key_idx % 8);
-	field.bit_mask = 0x7 << field.bit_offset;
-
-	offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-
-	rt2x00usb_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, field,
-			   (crypto->cmd == SET_KEY) * crypto->cipher);
-	rt2x00usb_register_write(rt2x00dev, offset, reg);
-
-	/*
-	 * Update WCID information
-	 */
-	rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
-
-	return 0;
-}
-
-static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
-					 struct rt2x00lib_crypto *crypto,
-					 struct ieee80211_key_conf *key)
-{
-	struct hw_key_entry key_entry;
-	int timeout;
-	u32 offset;
-
-	if (crypto->cmd == SET_KEY) {
-		/*
-		 * 1 pairwise key is possible per AID, this means that the AID
-		 * equals our hw_key_idx. Make sure the WCID starts _after_ the
-		 * last possible shared key entry.
-		 */
-		if (crypto->aid > (256 - 32))
-			return -ENOSPC;
-
-		key->hw_key_idx = 32 + crypto->aid;
-
-		memcpy(key_entry.key, crypto->key,
-		       sizeof(key_entry.key));
-		memcpy(key_entry.tx_mic, crypto->tx_mic,
-		       sizeof(key_entry.tx_mic));
-		memcpy(key_entry.rx_mic, crypto->rx_mic,
-		       sizeof(key_entry.rx_mic));
-
-		offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
-		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
-		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-						    USB_VENDOR_REQUEST_OUT,
-						    offset, &key_entry,
-						    sizeof(key_entry),
-						    timeout);
-	}
-
-	/*
-	 * Update WCID information
-	 */
-	rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
-
-	return 0;
-}
-
-static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev,
-				    const unsigned int filter_flags)
-{
-	u32 reg;
-
-	/*
-	 * Start configuration steps.
-	 * Note that the version error will always be dropped
-	 * and broadcast frames will always be accepted since
-	 * there is no filter for it at this time.
-	 */
-	rt2x00usb_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
-			   !(filter_flags & FIF_FCSFAIL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
-			   !(filter_flags & FIF_PLCPFAIL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
-			   !(filter_flags & FIF_PROMISC_IN_BSS));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
-			   !(filter_flags & FIF_ALLMULTI));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
-			   !(filter_flags & FIF_PSPOLL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 1);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR, 0);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00usb_register_write(rt2x00dev, RX_FILTER_CFG, reg);
-}
-
-static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev,
-				  struct rt2x00_intf *intf,
-				  struct rt2x00intf_conf *conf,
-				  const unsigned int flags)
-{
-	unsigned int beacon_base;
-	u32 reg;
-
-	if (flags & CONFIG_UPDATE_TYPE) {
-		/*
-		 * Clear current synchronisation setup.
-		 * For the Beacon base registers we only need to clear
-		 * the first byte since that byte contains the VALID and OWNER
-		 * bits which (when set to 0) will invalidate the entire beacon.
-		 */
-		beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
-		rt2x00usb_register_write(rt2x00dev, beacon_base, 0);
-
-		/*
-		 * Enable synchronisation.
-		 */
-		rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
-		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
-		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
-		rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-	}
-
-	if (flags & CONFIG_UPDATE_MAC) {
-		reg = le32_to_cpu(conf->mac[1]);
-		rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
-		conf->mac[1] = cpu_to_le32(reg);
-
-		rt2x00usb_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
-					      conf->mac, sizeof(conf->mac));
-	}
-
-	if (flags & CONFIG_UPDATE_BSSID) {
-		reg = le32_to_cpu(conf->bssid[1]);
-		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 0);
-		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
-		conf->bssid[1] = cpu_to_le32(reg);
-
-		rt2x00usb_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
-					      conf->bssid, sizeof(conf->bssid));
-	}
-}
-
-static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev,
-				 struct rt2x00lib_erp *erp)
-{
-	u32 reg;
-
-	rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
-	rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
-			   !!erp->short_preamble);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
-			   !!erp->short_preamble);
-	rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
-			   erp->cts_protection ? 2 : 0);
-	rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
-	rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE,
-				 erp->basic_rates);
-	rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-
-	rt2x00usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
-	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
-	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
-	rt2x00usb_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
-	rt2x00usb_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
-			   erp->beacon_int * 16);
-	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-}
-
-static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev,
-				 struct antenna_setup *ant)
-{
-	u8 r1;
-	u8 r3;
-
-	rt2800usb_bbp_read(rt2x00dev, 1, &r1);
-	rt2800usb_bbp_read(rt2x00dev, 3, &r3);
-
-	/*
-	 * Configure the TX antenna.
-	 */
-	switch ((int)ant->tx) {
-	case 1:
-		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
-		break;
-	case 2:
-		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
-		break;
-	case 3:
-		/* Do nothing */
-		break;
-	}
-
-	/*
-	 * Configure the RX antenna.
-	 */
-	switch ((int)ant->rx) {
-	case 1:
-		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
-		break;
-	case 2:
-		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
-		break;
-	case 3:
-		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
-		break;
-	}
-
-	rt2800usb_bbp_write(rt2x00dev, 3, r3);
-	rt2800usb_bbp_write(rt2x00dev, 1, r1);
-}
-
-static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
-				      struct rt2x00lib_conf *libconf)
-{
-	u16 eeprom;
-	short lna_gain;
-
-	if (libconf->rf.channel <= 14) {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
-	} else if (libconf->rf.channel <= 64) {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
-	} else if (libconf->rf.channel <= 128) {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
-		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
-	} else {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
-		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
-	}
-
-	rt2x00dev->lna_gain = lna_gain;
-}
-
-static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
-					  struct ieee80211_conf *conf,
-					  struct rf_channel *rf,
-					  struct channel_info *info)
-{
-	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
-
-	if (rt2x00dev->default_ant.tx == 1)
-		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
-
-	if (rt2x00dev->default_ant.rx == 1) {
-		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
-		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-	} else if (rt2x00dev->default_ant.rx == 2)
-		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-
-	if (rf->channel > 14) {
-		/*
-		 * When TX power is below 0, we should increase it by 7 to
-		 * make it a positive value (Minumum value is -7).
-		 * However this means that values between 0 and 7 have
-		 * double meaning, and we should set a 7DBm boost flag.
-		 */
-		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
-				   (info->tx_power1 >= 0));
-
-		if (info->tx_power1 < 0)
-			info->tx_power1 += 7;
-
-		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
-				   TXPOWER_A_TO_DEV(info->tx_power1));
-
-		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
-				   (info->tx_power2 >= 0));
-
-		if (info->tx_power2 < 0)
-			info->tx_power2 += 7;
-
-		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
-				   TXPOWER_A_TO_DEV(info->tx_power2));
-	} else {
-		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
-				   TXPOWER_G_TO_DEV(info->tx_power1));
-		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
-				   TXPOWER_G_TO_DEV(info->tx_power2));
-	}
-
-	rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
-
-	rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
-	rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
-	rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-	rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
-
-	udelay(200);
-
-	rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
-	rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
-	rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
-	rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
-
-	udelay(200);
-
-	rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
-	rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
-	rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-	rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
-}
-
-static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
-					  struct ieee80211_conf *conf,
-					  struct rf_channel *rf,
-					  struct channel_info *info)
-{
-	u8 rfcsr;
-
-	rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1);
-	rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3);
-
-	rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
-	rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr);
-
-	rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
-			  TXPOWER_G_TO_DEV(info->tx_power1));
-	rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr);
-
-	rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
-	rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
-
-	rt2800usb_rfcsr_write(rt2x00dev, 24,
-			      rt2x00dev->calibration[conf_is_ht40(conf)]);
-
-	rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
-	rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
-}
-
-static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
-				     struct ieee80211_conf *conf,
-				     struct rf_channel *rf,
-				     struct channel_info *info)
-{
-	u32 reg;
-	unsigned int tx_pin;
-	u8 bbp;
-
-	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
-		rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info);
-	else
-		rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info);
-
-	/*
-	 * Change BBP settings
-	 */
-	rt2800usb_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
-	rt2800usb_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-	rt2800usb_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
-	rt2800usb_bbp_write(rt2x00dev, 86, 0);
-
-	if (rf->channel <= 14) {
-		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
-			rt2800usb_bbp_write(rt2x00dev, 82, 0x62);
-			rt2800usb_bbp_write(rt2x00dev, 75, 0x46);
-		} else {
-			rt2800usb_bbp_write(rt2x00dev, 82, 0x84);
-			rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
-		}
-	} else {
-		rt2800usb_bbp_write(rt2x00dev, 82, 0xf2);
-
-		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
-			rt2800usb_bbp_write(rt2x00dev, 75, 0x46);
-		else
-			rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
-	}
-
-	rt2x00usb_register_read(rt2x00dev, TX_BAND_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
-	rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
-	rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
-	rt2x00usb_register_write(rt2x00dev, TX_BAND_CFG, reg);
-
-	tx_pin = 0;
-
-	/* Turn on unused PA or LNA when not using 1T or 1R */
-	if (rt2x00dev->default_ant.tx != 1) {
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
-	}
-
-	/* Turn on unused PA or LNA when not using 1T or 1R */
-	if (rt2x00dev->default_ant.rx != 1) {
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
-	}
-
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
-
-	rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-
-	rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
-	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
-	rt2800usb_bbp_write(rt2x00dev, 4, bbp);
-
-	rt2800usb_bbp_read(rt2x00dev, 3, &bbp);
-	rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
-	rt2800usb_bbp_write(rt2x00dev, 3, bbp);
-
-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-		if (conf_is_ht40(conf)) {
-			rt2800usb_bbp_write(rt2x00dev, 69, 0x1a);
-			rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
-			rt2800usb_bbp_write(rt2x00dev, 73, 0x16);
-		} else {
-			rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
-			rt2800usb_bbp_write(rt2x00dev, 70, 0x08);
-			rt2800usb_bbp_write(rt2x00dev, 73, 0x11);
-		}
-	}
-
-	msleep(1);
-}
-
-static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev,
-				     const int txpower)
-{
-	u32 reg;
-	u32 value = TXPOWER_G_TO_DEV(txpower);
-	u8 r1;
-
-	rt2800usb_bbp_read(rt2x00dev, 1, &r1);
-	rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
-	rt2800usb_bbp_write(rt2x00dev, 1, r1);
-
-	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_11MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_6MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
-	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_54MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS0, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
-	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS7, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS8, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
-	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS15, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN1, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
-	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
-	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
-}
-
-static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
-					 struct rt2x00lib_conf *libconf)
-{
-	u32 reg;
-
-	rt2x00usb_register_read(rt2x00dev, TX_RTY_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
-			   libconf->conf->short_frame_max_tx_count);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
-			   libconf->conf->long_frame_max_tx_count);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
-	rt2x00usb_register_write(rt2x00dev, TX_RTY_CFG, reg);
-}
-
-static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev,
-				struct rt2x00lib_conf *libconf)
-{
-	enum dev_state state =
-	    (libconf->conf->flags & IEEE80211_CONF_PS) ?
-		STATE_SLEEP : STATE_AWAKE;
-	u32 reg;
-
-	if (state == STATE_SLEEP) {
-		rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
-
-		rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
-				   libconf->conf->listen_interval - 1);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
-		rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-
-		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-	} else {
-		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-
-		rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
-		rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-	}
-}
-
-static void rt2800usb_config(struct rt2x00_dev *rt2x00dev,
-			     struct rt2x00lib_conf *libconf,
-			     const unsigned int flags)
-{
-	/* Always recalculate LNA gain before changing configuration */
-	rt2800usb_config_lna_gain(rt2x00dev, libconf);
-
-	if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
-		rt2800usb_config_channel(rt2x00dev, libconf->conf,
-					 &libconf->rf, &libconf->channel);
-	if (flags & IEEE80211_CONF_CHANGE_POWER)
-		rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level);
-	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
-		rt2800usb_config_retry_limit(rt2x00dev, libconf);
-	if (flags & IEEE80211_CONF_CHANGE_PS)
-		rt2800usb_config_ps(rt2x00dev, libconf);
-}
-
-/*
- * Link tuning
- */
-static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev,
-				 struct link_qual *qual)
-{
-	u32 reg;
-
-	/*
-	 * Update FCS error count from register.
-	 */
-	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
-	qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
-}
-
-static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev)
-{
-	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
-		if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
-			return 0x1c + (2 * rt2x00dev->lna_gain);
-		else
-			return 0x2e + rt2x00dev->lna_gain;
-	}
-
-	if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
-		return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
-	else
-		return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
-}
-
-static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev,
-				     struct link_qual *qual, u8 vgc_level)
-{
-	if (qual->vgc_level != vgc_level) {
-		rt2800usb_bbp_write(rt2x00dev, 66, vgc_level);
-		qual->vgc_level = vgc_level;
-		qual->vgc_level_reg = vgc_level;
-	}
-}
-
-static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev,
-				  struct link_qual *qual)
-{
-	rt2800usb_set_vgc(rt2x00dev, qual,
-			  rt2800usb_get_default_vgc(rt2x00dev));
-}
-
-static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev,
-				 struct link_qual *qual, const u32 count)
-{
-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
-		return;
-
-	/*
-	 * When RSSI is better then -80 increase VGC level with 0x10
-	 */
-	rt2800usb_set_vgc(rt2x00dev, qual,
-			  rt2800usb_get_default_vgc(rt2x00dev) +
-			  ((qual->rssi > -80) * 0x10));
-}
-
-/*
  * Firmware functions
  */
 static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
@@ -1172,7 +153,7 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 	 * Wait for stable hardware.
 	 */
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+		rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
 		if (reg && reg != ~0)
 			break;
 		msleep(1);
@@ -1192,8 +173,8 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 					    data + offset, length,
 					    REGISTER_TIMEOUT32(length));
 
-	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
-	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
 
 	/*
 	 * Send firmware request to device to load firmware,
@@ -1208,18 +189,18 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 	}
 
 	msleep(10);
-	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 
 	/*
 	 * Send signal to firmware during boot time.
 	 */
-	rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
+	rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
 
 	if ((chipset == 0x3070) ||
 	    (chipset == 0x3071) ||
 	    (chipset == 0x3572)) {
 		udelay(200);
-		rt2800usb_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
+		rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
 		udelay(10);
 	}
 
@@ -1227,7 +208,7 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 	 * Wait for device to stabilize.
 	 */
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+		rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
 		if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
 			break;
 		msleep(1);
@@ -1241,536 +222,14 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Initialize firmware.
 	 */
-	rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
-	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 	msleep(1);
 
 	return 0;
 }
 
 /*
- * Initialization functions.
- */
-static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
-{
-	u32 reg;
-	unsigned int i;
-
-	/*
-	 * Wait untill BBP and RF are ready.
-	 */
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
-		if (reg && reg != ~0)
-			break;
-		msleep(1);
-	}
-
-	if (i == REGISTER_BUSY_COUNT) {
-		ERROR(rt2x00dev, "Unstable hardware.\n");
-		return -EBUSY;
-	}
-
-	rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
-	rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
-
-	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-
-	rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
-
-	rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
-				    USB_MODE_RESET, REGISTER_TIMEOUT);
-
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-
-	rt2x00usb_register_read(rt2x00dev, BCN_OFFSET0, &reg);
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
-	rt2x00usb_register_write(rt2x00dev, BCN_OFFSET0, reg);
-
-	rt2x00usb_register_read(rt2x00dev, BCN_OFFSET1, &reg);
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
-	rt2x00usb_register_write(rt2x00dev, BCN_OFFSET1, reg);
-
-	rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
-	rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-
-	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
-	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-
-	if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
-		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
-		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
-		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
-	} else {
-		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
-		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
-	}
-
-	rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_MFB_ENABLE, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_MRQ_EN, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_RDG_EN, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_CF_ACK_EN, 1);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFS, 0);
-	rt2x00usb_register_write(rt2x00dev, TX_LINK_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
-	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
-	rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
-	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
-	if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
-	    rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
-		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
-	else
-		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
-	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
-	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
-	rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg);
-
-	rt2x00usb_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
-
-	rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AUTORESPONDER, 1);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MMODE, 0);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MREF, 0);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
-	rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_RATE, 8);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-	rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_RATE, 8);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-	rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-	rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-	rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-	rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-	rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-
-	rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
-
-	rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
-	rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-
-	rt2x00usb_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
-	rt2x00usb_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
-
-	rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
-	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
-			   IEEE80211_MAX_RTS_THRESHOLD);
-	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_FBK_EN, 0);
-	rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
-
-	rt2x00usb_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
-	rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-
-	/*
-	 * ASIC will keep garbage value after boot, clear encryption keys.
-	 */
-	for (i = 0; i < 4; i++)
-		rt2x00usb_register_write(rt2x00dev,
-					 SHARED_KEY_MODE_ENTRY(i), 0);
-
-	for (i = 0; i < 256; i++) {
-		u32 wcid[2] = { 0xffffffff, 0x00ffffff };
-		rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
-					      wcid, sizeof(wcid));
-
-		rt2x00usb_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
-		rt2x00usb_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
-	}
-
-	/*
-	 * Clear all beacons
-	 * For the Beacon base registers we only need to clear
-	 * the first byte since that byte contains the VALID and OWNER
-	 * bits which (when set to 0) will invalidate the entire beacon.
-	 */
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
-
-	rt2x00usb_register_read(rt2x00dev, USB_CYC_CFG, &reg);
-	rt2x00_set_field32(&reg, USB_CYC_CFG_CLOCK_CYCLE, 30);
-	rt2x00usb_register_write(rt2x00dev, USB_CYC_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS0FBK, 0);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS1FBK, 0);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS2FBK, 1);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS3FBK, 2);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS4FBK, 3);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS5FBK, 4);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS6FBK, 5);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS7FBK, 6);
-	rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG0, reg);
-
-	rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG1, &reg);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS8FBK, 8);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS9FBK, 8);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS10FBK, 9);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS11FBK, 10);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS12FBK, 11);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS13FBK, 12);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS14FBK, 13);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS15FBK, 14);
-	rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG1, reg);
-
-	rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, &reg);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS0FBK, 8);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS1FBK, 8);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS2FBK, 9);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS3FBK, 10);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS4FBK, 11);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS5FBK, 12);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS6FBK, 13);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS7FBK, 14);
-	rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG0, reg);
-
-	rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG1, &reg);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS0FBK, 0);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS1FBK, 0);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS2FBK, 1);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS3FBK, 2);
-	rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG1, reg);
-
-	/*
-	 * We must clear the error counters.
-	 * These registers are cleared on read,
-	 * so we may pass a useless variable to store the value.
-	 */
-	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
-	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, &reg);
-	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT2, &reg);
-	rt2x00usb_register_read(rt2x00dev, TX_STA_CNT0, &reg);
-	rt2x00usb_register_read(rt2x00dev, TX_STA_CNT1, &reg);
-	rt2x00usb_register_read(rt2x00dev, TX_STA_CNT2, &reg);
-
-	return 0;
-}
-
-static int rt2800usb_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
-{
-	unsigned int i;
-	u32 reg;
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00usb_register_read(rt2x00dev, MAC_STATUS_CFG, &reg);
-		if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
-			return 0;
-
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
-	return -EACCES;
-}
-
-static int rt2800usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
-{
-	unsigned int i;
-	u8 value;
-
-	/*
-	 * BBP was enabled after firmware was loaded,
-	 * but we need to reactivate it now.
-	 */
-	rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
-	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
-	msleep(1);
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2800usb_bbp_read(rt2x00dev, 0, &value);
-		if ((value != 0xff) && (value != 0x00))
-			return 0;
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
-	return -EACCES;
-}
-
-static int rt2800usb_init_bbp(struct rt2x00_dev *rt2x00dev)
-{
-	unsigned int i;
-	u16 eeprom;
-	u8 reg_id;
-	u8 value;
-
-	if (unlikely(rt2800usb_wait_bbp_rf_ready(rt2x00dev) ||
-		     rt2800usb_wait_bbp_ready(rt2x00dev)))
-		return -EACCES;
-
-	rt2800usb_bbp_write(rt2x00dev, 65, 0x2c);
-	rt2800usb_bbp_write(rt2x00dev, 66, 0x38);
-	rt2800usb_bbp_write(rt2x00dev, 69, 0x12);
-	rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
-	rt2800usb_bbp_write(rt2x00dev, 73, 0x10);
-	rt2800usb_bbp_write(rt2x00dev, 81, 0x37);
-	rt2800usb_bbp_write(rt2x00dev, 82, 0x62);
-	rt2800usb_bbp_write(rt2x00dev, 83, 0x6a);
-	rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
-	rt2800usb_bbp_write(rt2x00dev, 86, 0x00);
-	rt2800usb_bbp_write(rt2x00dev, 91, 0x04);
-	rt2800usb_bbp_write(rt2x00dev, 92, 0x00);
-	rt2800usb_bbp_write(rt2x00dev, 103, 0x00);
-	rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
-
-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-		rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
-		rt2800usb_bbp_write(rt2x00dev, 73, 0x12);
-	}
-
-	if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) {
-		rt2800usb_bbp_write(rt2x00dev, 84, 0x19);
-	}
-
-	if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
-		rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
-		rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
-		rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
-	}
-
-	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
-
-		if (eeprom != 0xffff && eeprom != 0x0000) {
-			reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
-			value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
-			rt2800usb_bbp_write(rt2x00dev, reg_id, value);
-		}
-	}
-
-	return 0;
-}
-
-static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev,
-				   bool bw40, u8 rfcsr24, u8 filter_target)
-{
-	unsigned int i;
-	u8 bbp;
-	u8 rfcsr;
-	u8 passband;
-	u8 stopband;
-	u8 overtuned = 0;
-
-	rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
-
-	rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
-	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
-	rt2800usb_bbp_write(rt2x00dev, 4, bbp);
-
-	rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
-	rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
-
-	/*
-	 * Set power & frequency of passband test tone
-	 */
-	rt2800usb_bbp_write(rt2x00dev, 24, 0);
-
-	for (i = 0; i < 100; i++) {
-		rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
-		msleep(1);
-
-		rt2800usb_bbp_read(rt2x00dev, 55, &passband);
-		if (passband)
-			break;
-	}
-
-	/*
-	 * Set power & frequency of stopband test tone
-	 */
-	rt2800usb_bbp_write(rt2x00dev, 24, 0x06);
-
-	for (i = 0; i < 100; i++) {
-		rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
-		msleep(1);
-
-		rt2800usb_bbp_read(rt2x00dev, 55, &stopband);
-
-		if ((passband - stopband) <= filter_target) {
-			rfcsr24++;
-			overtuned += ((passband - stopband) == filter_target);
-		} else
-			break;
-
-		rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
-	}
-
-	rfcsr24 -= !!overtuned;
-
-	rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
-	return rfcsr24;
-}
-
-static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev)
-{
-	u8 rfcsr;
-	u8 bbp;
-
-	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
-		return 0;
-
-	/*
-	 * Init RF calibration.
-	 */
-	rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
-	rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
-	msleep(1);
-	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
-	rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
-
-	rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40);
-	rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03);
-	rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02);
-	rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70);
-	rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f);
-	rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71);
-	rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21);
-	rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b);
-	rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90);
-	rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58);
-	rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3);
-	rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92);
-	rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c);
-	rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02);
-	rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba);
-	rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb);
-	rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16);
-	rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01);
-	rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03);
-	rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f);
-
-	/*
-	 * Set RX Filter calibration for 20MHz and 40MHz
-	 */
-	rt2x00dev->calibration[0] =
-	    rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
-	rt2x00dev->calibration[1] =
-	    rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
-
-	/*
-	 * Set back to initial state
-	 */
-	rt2800usb_bbp_write(rt2x00dev, 24, 0);
-
-	rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
-	rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
-
-	/*
-	 * set BBP back to BW20
-	 */
-	rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
-	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
-	rt2800usb_bbp_write(rt2x00dev, 4, bbp);
-
-	return 0;
-}
-
-/*
  * Device state switch handlers.
  */
 static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
@@ -1778,11 +237,11 @@ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
 {
 	u32 reg;
 
-	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
 			   (state == STATE_RADIO_RX_ON) ||
 			   (state == STATE_RADIO_RX_ON_LINK));
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 }
 
 static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
@@ -1791,7 +250,7 @@ static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
 	u32 reg;
 
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
 		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
 			return 0;
@@ -1812,25 +271,25 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 	 * Initialize all registers.
 	 */
 	if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) ||
-		     rt2800usb_init_registers(rt2x00dev) ||
-		     rt2800usb_init_bbp(rt2x00dev) ||
-		     rt2800usb_init_rfcsr(rt2x00dev)))
+		     rt2800_init_registers(rt2x00dev) ||
+		     rt2800_init_bbp(rt2x00dev) ||
+		     rt2800_init_rfcsr(rt2x00dev)))
 		return -EIO;
 
-	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 
 	udelay(50);
 
-	rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
-	rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 
 
-	rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, &reg);
+	rt2800_register_read(rt2x00dev, USB_DMA_CFG, &reg);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
 	/* Don't use bulk in aggregation when working with USB 1.1 */
 	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN,
@@ -1844,26 +303,26 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 			   ((RX_ENTRIES * DATA_FRAME_SIZE) / 1024) - 3);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_EN, 1);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
-	rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
+	rt2800_register_write(rt2x00dev, USB_DMA_CFG, reg);
 
-	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 
 	/*
 	 * Initialize LED control
 	 */
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
-	rt2800usb_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
+	rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
 			      word & 0xff, (word >> 8) & 0xff);
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
-	rt2800usb_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
+	rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
 			      word & 0xff, (word >> 8) & 0xff);
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
-	rt2800usb_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
+	rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
 			      word & 0xff, (word >> 8) & 0xff);
 
 	return 0;
@@ -1873,14 +332,14 @@ static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
 
-	rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-	rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
-	rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0);
-	rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, 0);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
+	rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0);
+	rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0);
 
 	/* Wait for DMA, ignore error */
 	rt2800usb_wait_wpdma_ready(rt2x00dev);
@@ -1892,9 +351,9 @@ static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
 			       enum dev_state state)
 {
 	if (state == STATE_AWAKE)
-		rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
+		rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
 	else
-		rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+		rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
 
 	return 0;
 }
@@ -2048,9 +507,9 @@ static void rt2800usb_write_beacon(struct queue_entry *entry)
 	 * Disable beaconing while we are reloading the beacon data,
 	 * otherwise we might be sending out invalid data.
 	 */
-	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
 	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
-	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 
 	/*
 	 * Write entire beacon with descriptor to register.
@@ -2093,12 +552,12 @@ static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 		return;
 	}
 
-	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
 	if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
 		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
 		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
 		rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
-		rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+		rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 	}
 }
 
@@ -2124,7 +583,7 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 	 */
 	memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
 	rxd = (__le32 *)skbdesc->desc;
-	rxwi = &rxd[RXD_DESC_SIZE / sizeof(__le32)];
+	rxwi = &rxd[RXINFO_DESC_SIZE / sizeof(__le32)];
 
 	/*
 	 * It is now safe to read the descriptor on all architectures.
@@ -2326,7 +785,7 @@ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 * Identify RF chipset.
 	 */
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
-	rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+	rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2870, value, reg);
 
 	/*
@@ -2385,9 +844,9 @@ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 * Store led settings, for correct led behaviour.
 	 */
 #ifdef CONFIG_RT2X00_LIB_LEDS
-	rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
-	rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
-	rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
+	rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
+	rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
+	rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ,
 			   &rt2x00dev->led_mcu_reg);
@@ -2600,10 +1059,25 @@ static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	return 0;
 }
 
+static const struct rt2800_ops rt2800usb_rt2800_ops = {
+	.register_read		= rt2x00usb_register_read,
+	.register_write		= rt2x00usb_register_write,
+	.register_write_lock	= rt2x00usb_register_write_lock,
+
+	.register_multiread	= rt2x00usb_register_multiread,
+	.register_multiwrite	= rt2x00usb_register_multiwrite,
+
+	.regbusy_read		= rt2x00usb_regbusy_read,
+};
+
 static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
 
+	rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_USB);
+
+	rt2x00dev->priv = (void *)&rt2800usb_rt2800_ops;
+
 	/*
 	 * Allocate eeprom data.
 	 */
@@ -2645,162 +1119,6 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	return 0;
 }
 
-/*
- * IEEE80211 stack callback functions.
- */
-static void rt2800usb_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
-				   u32 *iv32, u16 *iv16)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct mac_iveiv_entry iveiv_entry;
-	u32 offset;
-
-	offset = MAC_IVEIV_ENTRY(hw_key_idx);
-	rt2x00usb_register_multiread(rt2x00dev, offset,
-				      &iveiv_entry, sizeof(iveiv_entry));
-
-	memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
-	memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
-}
-
-static int rt2800usb_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	u32 reg;
-	bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
-
-	rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES, value);
-	rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-
-	return 0;
-}
-
-static int rt2800usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
-			     const struct ieee80211_tx_queue_params *params)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct data_queue *queue;
-	struct rt2x00_field32 field;
-	int retval;
-	u32 reg;
-	u32 offset;
-
-	/*
-	 * First pass the configuration through rt2x00lib, that will
-	 * update the queue settings and validate the input. After that
-	 * we are free to update the registers based on the value
-	 * in the queue parameter.
-	 */
-	retval = rt2x00mac_conf_tx(hw, queue_idx, params);
-	if (retval)
-		return retval;
-
-	/*
-	 * We only need to perform additional register initialization
-	 * for WMM queues/
-	 */
-	if (queue_idx >= 4)
-		return 0;
-
-	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
-
-	/* Update WMM TXOP register */
-	offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
-	field.bit_offset = (queue_idx & 1) * 16;
-	field.bit_mask = 0xffff << field.bit_offset;
-
-	rt2x00usb_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, field, queue->txop);
-	rt2x00usb_register_write(rt2x00dev, offset, reg);
-
-	/* Update WMM registers */
-	field.bit_offset = queue_idx * 4;
-	field.bit_mask = 0xf << field.bit_offset;
-
-	rt2x00usb_register_read(rt2x00dev, WMM_AIFSN_CFG, &reg);
-	rt2x00_set_field32(&reg, field, queue->aifs);
-	rt2x00usb_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, WMM_CWMIN_CFG, &reg);
-	rt2x00_set_field32(&reg, field, queue->cw_min);
-	rt2x00usb_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, WMM_CWMAX_CFG, &reg);
-	rt2x00_set_field32(&reg, field, queue->cw_max);
-	rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
-
-	/* Update EDCA registers */
-	offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
-
-	rt2x00usb_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, EDCA_AC0_CFG_TX_OP, queue->txop);
-	rt2x00_set_field32(&reg, EDCA_AC0_CFG_AIFSN, queue->aifs);
-	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMIN, queue->cw_min);
-	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMAX, queue->cw_max);
-	rt2x00usb_register_write(rt2x00dev, offset, reg);
-
-	return 0;
-}
-
-static u64 rt2800usb_get_tsf(struct ieee80211_hw *hw)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	u64 tsf;
-	u32 reg;
-
-	rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW1, &reg);
-	tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
-	rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW0, &reg);
-	tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
-
-	return tsf;
-}
-
-static const struct ieee80211_ops rt2800usb_mac80211_ops = {
-	.tx			= rt2x00mac_tx,
-	.start			= rt2x00mac_start,
-	.stop			= rt2x00mac_stop,
-	.add_interface		= rt2x00mac_add_interface,
-	.remove_interface	= rt2x00mac_remove_interface,
-	.config			= rt2x00mac_config,
-	.configure_filter	= rt2x00mac_configure_filter,
-	.set_tim		= rt2x00mac_set_tim,
-	.set_key		= rt2x00mac_set_key,
-	.get_stats		= rt2x00mac_get_stats,
-	.get_tkip_seq		= rt2800usb_get_tkip_seq,
-	.set_rts_threshold	= rt2800usb_set_rts_threshold,
-	.bss_info_changed	= rt2x00mac_bss_info_changed,
-	.conf_tx		= rt2800usb_conf_tx,
-	.get_tx_stats		= rt2x00mac_get_tx_stats,
-	.get_tsf		= rt2800usb_get_tsf,
-	.rfkill_poll		= rt2x00mac_rfkill_poll,
-};
-
 static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 	.probe_hw		= rt2800usb_probe_hw,
 	.get_firmware_name	= rt2800usb_get_firmware_name,
@@ -2810,10 +1128,10 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 	.uninitialize		= rt2x00usb_uninitialize,
 	.clear_entry		= rt2x00usb_clear_entry,
 	.set_device_state	= rt2800usb_set_device_state,
-	.rfkill_poll		= rt2800usb_rfkill_poll,
-	.link_stats		= rt2800usb_link_stats,
-	.reset_tuner		= rt2800usb_reset_tuner,
-	.link_tuner		= rt2800usb_link_tuner,
+	.rfkill_poll		= rt2800_rfkill_poll,
+	.link_stats		= rt2800_link_stats,
+	.reset_tuner		= rt2800_reset_tuner,
+	.link_tuner		= rt2800_link_tuner,
 	.write_tx_desc		= rt2800usb_write_tx_desc,
 	.write_tx_data		= rt2x00usb_write_tx_data,
 	.write_beacon		= rt2800usb_write_beacon,
@@ -2821,19 +1139,19 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 	.kick_tx_queue		= rt2800usb_kick_tx_queue,
 	.kill_tx_queue		= rt2x00usb_kill_tx_queue,
 	.fill_rxdone		= rt2800usb_fill_rxdone,
-	.config_shared_key	= rt2800usb_config_shared_key,
-	.config_pairwise_key	= rt2800usb_config_pairwise_key,
-	.config_filter		= rt2800usb_config_filter,
-	.config_intf		= rt2800usb_config_intf,
-	.config_erp		= rt2800usb_config_erp,
-	.config_ant		= rt2800usb_config_ant,
-	.config			= rt2800usb_config,
+	.config_shared_key	= rt2800_config_shared_key,
+	.config_pairwise_key	= rt2800_config_pairwise_key,
+	.config_filter		= rt2800_config_filter,
+	.config_intf		= rt2800_config_intf,
+	.config_erp		= rt2800_config_erp,
+	.config_ant		= rt2800_config_ant,
+	.config			= rt2800_config,
 };
 
 static const struct data_queue_desc rt2800usb_queue_rx = {
 	.entry_num		= RX_ENTRIES,
 	.data_size		= AGGREGATION_SIZE,
-	.desc_size		= RXD_DESC_SIZE + RXWI_DESC_SIZE,
+	.desc_size		= RXINFO_DESC_SIZE + RXWI_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_usb),
 };
 
@@ -2862,9 +1180,9 @@ static const struct rt2x00_ops rt2800usb_ops = {
 	.tx		= &rt2800usb_queue_tx,
 	.bcn		= &rt2800usb_queue_bcn,
 	.lib		= &rt2800usb_rt2x00_ops,
-	.hw		= &rt2800usb_mac80211_ops,
+	.hw		= &rt2800_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-	.debugfs	= &rt2800usb_rt2x00debug,
+	.debugfs	= &rt2800_rt2x00debug,
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 };
 
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h
index 4d9991c9a51..c9d7d40ee5f 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.h
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -28,288 +28,10 @@
 #define RT2800USB_H
 
 /*
- * RF chip defines.
- *
- * RF2820 2.4G 2T3R
- * RF2850 2.4G/5G 2T3R
- * RF2720 2.4G 1T2R
- * RF2750 2.4G/5G 1T2R
- * RF3020 2.4G 1T1R
- * RF2020 2.4G B/G
- * RF3021 2.4G 1T2R
- * RF3022 2.4G 2T2R
- * RF3052 2.4G 2T2R
- */
-#define RF2820				0x0001
-#define RF2850				0x0002
-#define RF2720				0x0003
-#define RF2750				0x0004
-#define RF3020				0x0005
-#define RF2020				0x0006
-#define RF3021				0x0007
-#define RF3022				0x0008
-#define RF3052				0x0009
-
-/*
- * RT2870 version
- */
-#define RT2860C_VERSION			0x28600100
-#define RT2860D_VERSION			0x28600101
-#define RT2880E_VERSION			0x28720200
-#define RT2883_VERSION			0x28830300
-#define RT3070_VERSION			0x30700200
-
-/*
- * Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
- */
-#define DEFAULT_RSSI_OFFSET		120 /* FIXME */
-
-/*
- * Register layout information.
- */
-#define CSR_REG_BASE			0x1000
-#define CSR_REG_SIZE			0x0800
-#define EEPROM_BASE			0x0000
-#define EEPROM_SIZE			0x0110
-#define BBP_BASE			0x0000
-#define BBP_SIZE			0x0080
-#define RF_BASE				0x0004
-#define RF_SIZE				0x0010
-
-/*
- * Number of TX queues.
- */
-#define NUM_TX_QUEUES			4
-
-/*
  * USB registers.
  */
 
 /*
- * HOST-MCU shared memory
- */
-#define HOST_CMD_CSR			0x0404
-#define HOST_CMD_CSR_HOST_COMMAND	FIELD32(0x000000ff)
-
-/*
- * INT_SOURCE_CSR: Interrupt source register.
- * Write one to clear corresponding bit.
- * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
- */
-#define INT_SOURCE_CSR			0x0200
-#define INT_SOURCE_CSR_RXDELAYINT	FIELD32(0x00000001)
-#define INT_SOURCE_CSR_TXDELAYINT	FIELD32(0x00000002)
-#define INT_SOURCE_CSR_RX_DONE		FIELD32(0x00000004)
-#define INT_SOURCE_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
-#define INT_SOURCE_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
-#define INT_SOURCE_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
-#define INT_SOURCE_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
-#define INT_SOURCE_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
-#define INT_SOURCE_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
-#define INT_SOURCE_CSR_MCU_COMMAND	FIELD32(0x00000200)
-#define INT_SOURCE_CSR_RXTX_COHERENT	FIELD32(0x00000400)
-#define INT_SOURCE_CSR_TBTT		FIELD32(0x00000800)
-#define INT_SOURCE_CSR_PRE_TBTT		FIELD32(0x00001000)
-#define INT_SOURCE_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
-#define INT_SOURCE_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
-#define INT_SOURCE_CSR_GPTIMER		FIELD32(0x00008000)
-#define INT_SOURCE_CSR_RX_COHERENT	FIELD32(0x00010000)
-#define INT_SOURCE_CSR_TX_COHERENT	FIELD32(0x00020000)
-
-/*
- * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
- */
-#define INT_MASK_CSR			0x0204
-#define INT_MASK_CSR_RXDELAYINT		FIELD32(0x00000001)
-#define INT_MASK_CSR_TXDELAYINT		FIELD32(0x00000002)
-#define INT_MASK_CSR_RX_DONE		FIELD32(0x00000004)
-#define INT_MASK_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
-#define INT_MASK_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
-#define INT_MASK_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
-#define INT_MASK_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
-#define INT_MASK_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
-#define INT_MASK_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
-#define INT_MASK_CSR_MCU_COMMAND	FIELD32(0x00000200)
-#define INT_MASK_CSR_RXTX_COHERENT	FIELD32(0x00000400)
-#define INT_MASK_CSR_TBTT		FIELD32(0x00000800)
-#define INT_MASK_CSR_PRE_TBTT		FIELD32(0x00001000)
-#define INT_MASK_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
-#define INT_MASK_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
-#define INT_MASK_CSR_GPTIMER		FIELD32(0x00008000)
-#define INT_MASK_CSR_RX_COHERENT	FIELD32(0x00010000)
-#define INT_MASK_CSR_TX_COHERENT	FIELD32(0x00020000)
-
-/*
- * WPDMA_GLO_CFG
- */
-#define WPDMA_GLO_CFG 			0x0208
-#define WPDMA_GLO_CFG_ENABLE_TX_DMA	FIELD32(0x00000001)
-#define WPDMA_GLO_CFG_TX_DMA_BUSY    	FIELD32(0x00000002)
-#define WPDMA_GLO_CFG_ENABLE_RX_DMA	FIELD32(0x00000004)
-#define WPDMA_GLO_CFG_RX_DMA_BUSY	FIELD32(0x00000008)
-#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE	FIELD32(0x00000030)
-#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE	FIELD32(0x00000040)
-#define WPDMA_GLO_CFG_BIG_ENDIAN	FIELD32(0x00000080)
-#define WPDMA_GLO_CFG_RX_HDR_SCATTER	FIELD32(0x0000ff00)
-#define WPDMA_GLO_CFG_HDR_SEG_LEN	FIELD32(0xffff0000)
-
-/*
- * WPDMA_RST_IDX
- */
-#define WPDMA_RST_IDX 			0x020c
-#define WPDMA_RST_IDX_DTX_IDX0		FIELD32(0x00000001)
-#define WPDMA_RST_IDX_DTX_IDX1		FIELD32(0x00000002)
-#define WPDMA_RST_IDX_DTX_IDX2		FIELD32(0x00000004)
-#define WPDMA_RST_IDX_DTX_IDX3		FIELD32(0x00000008)
-#define WPDMA_RST_IDX_DTX_IDX4		FIELD32(0x00000010)
-#define WPDMA_RST_IDX_DTX_IDX5		FIELD32(0x00000020)
-#define WPDMA_RST_IDX_DRX_IDX0		FIELD32(0x00010000)
-
-/*
- * DELAY_INT_CFG
- */
-#define DELAY_INT_CFG			0x0210
-#define DELAY_INT_CFG_RXMAX_PTIME	FIELD32(0x000000ff)
-#define DELAY_INT_CFG_RXMAX_PINT	FIELD32(0x00007f00)
-#define DELAY_INT_CFG_RXDLY_INT_EN	FIELD32(0x00008000)
-#define DELAY_INT_CFG_TXMAX_PTIME	FIELD32(0x00ff0000)
-#define DELAY_INT_CFG_TXMAX_PINT	FIELD32(0x7f000000)
-#define DELAY_INT_CFG_TXDLY_INT_EN	FIELD32(0x80000000)
-
-/*
- * WMM_AIFSN_CFG: Aifsn for each EDCA AC
- * AIFSN0: AC_BE
- * AIFSN1: AC_BK
- * AIFSN1: AC_VI
- * AIFSN1: AC_VO
- */
-#define WMM_AIFSN_CFG			0x0214
-#define WMM_AIFSN_CFG_AIFSN0		FIELD32(0x0000000f)
-#define WMM_AIFSN_CFG_AIFSN1		FIELD32(0x000000f0)
-#define WMM_AIFSN_CFG_AIFSN2		FIELD32(0x00000f00)
-#define WMM_AIFSN_CFG_AIFSN3		FIELD32(0x0000f000)
-
-/*
- * WMM_CWMIN_CSR: CWmin for each EDCA AC
- * CWMIN0: AC_BE
- * CWMIN1: AC_BK
- * CWMIN1: AC_VI
- * CWMIN1: AC_VO
- */
-#define WMM_CWMIN_CFG			0x0218
-#define WMM_CWMIN_CFG_CWMIN0		FIELD32(0x0000000f)
-#define WMM_CWMIN_CFG_CWMIN1		FIELD32(0x000000f0)
-#define WMM_CWMIN_CFG_CWMIN2		FIELD32(0x00000f00)
-#define WMM_CWMIN_CFG_CWMIN3		FIELD32(0x0000f000)
-
-/*
- * WMM_CWMAX_CSR: CWmax for each EDCA AC
- * CWMAX0: AC_BE
- * CWMAX1: AC_BK
- * CWMAX1: AC_VI
- * CWMAX1: AC_VO
- */
-#define WMM_CWMAX_CFG			0x021c
-#define WMM_CWMAX_CFG_CWMAX0		FIELD32(0x0000000f)
-#define WMM_CWMAX_CFG_CWMAX1		FIELD32(0x000000f0)
-#define WMM_CWMAX_CFG_CWMAX2		FIELD32(0x00000f00)
-#define WMM_CWMAX_CFG_CWMAX3		FIELD32(0x0000f000)
-
-/*
- * AC_TXOP0: AC_BK/AC_BE TXOP register
- * AC0TXOP: AC_BK in unit of 32us
- * AC1TXOP: AC_BE in unit of 32us
- */
-#define WMM_TXOP0_CFG			0x0220
-#define WMM_TXOP0_CFG_AC0TXOP		FIELD32(0x0000ffff)
-#define WMM_TXOP0_CFG_AC1TXOP		FIELD32(0xffff0000)
-
-/*
- * AC_TXOP1: AC_VO/AC_VI TXOP register
- * AC2TXOP: AC_VI in unit of 32us
- * AC3TXOP: AC_VO in unit of 32us
- */
-#define WMM_TXOP1_CFG			0x0224
-#define WMM_TXOP1_CFG_AC2TXOP		FIELD32(0x0000ffff)
-#define WMM_TXOP1_CFG_AC3TXOP		FIELD32(0xffff0000)
-
-/*
- * GPIO_CTRL_CFG:
- */
-#define GPIO_CTRL_CFG			0x0228
-#define GPIO_CTRL_CFG_BIT0		FIELD32(0x00000001)
-#define GPIO_CTRL_CFG_BIT1		FIELD32(0x00000002)
-#define GPIO_CTRL_CFG_BIT2		FIELD32(0x00000004)
-#define GPIO_CTRL_CFG_BIT3		FIELD32(0x00000008)
-#define GPIO_CTRL_CFG_BIT4		FIELD32(0x00000010)
-#define GPIO_CTRL_CFG_BIT5		FIELD32(0x00000020)
-#define GPIO_CTRL_CFG_BIT6		FIELD32(0x00000040)
-#define GPIO_CTRL_CFG_BIT7		FIELD32(0x00000080)
-#define GPIO_CTRL_CFG_BIT8		FIELD32(0x00000100)
-
-/*
- * MCU_CMD_CFG
- */
-#define MCU_CMD_CFG			0x022c
-
-/*
- * AC_BK register offsets
- */
-#define TX_BASE_PTR0			0x0230
-#define TX_MAX_CNT0			0x0234
-#define TX_CTX_IDX0			0x0238
-#define TX_DTX_IDX0			0x023c
-
-/*
- * AC_BE register offsets
- */
-#define TX_BASE_PTR1			0x0240
-#define TX_MAX_CNT1			0x0244
-#define TX_CTX_IDX1			0x0248
-#define TX_DTX_IDX1			0x024c
-
-/*
- * AC_VI register offsets
- */
-#define TX_BASE_PTR2			0x0250
-#define TX_MAX_CNT2			0x0254
-#define TX_CTX_IDX2			0x0258
-#define TX_DTX_IDX2			0x025c
-
-/*
- * AC_VO register offsets
- */
-#define TX_BASE_PTR3			0x0260
-#define TX_MAX_CNT3			0x0264
-#define TX_CTX_IDX3			0x0268
-#define TX_DTX_IDX3			0x026c
-
-/*
- * HCCA register offsets
- */
-#define TX_BASE_PTR4			0x0270
-#define TX_MAX_CNT4			0x0274
-#define TX_CTX_IDX4			0x0278
-#define TX_DTX_IDX4			0x027c
-
-/*
- * MGMT register offsets
- */
-#define TX_BASE_PTR5			0x0280
-#define TX_MAX_CNT5			0x0284
-#define TX_CTX_IDX5			0x0288
-#define TX_DTX_IDX5			0x028c
-
-/*
- * RX register offsets
- */
-#define RX_BASE_PTR			0x0290
-#define RX_MAX_CNT			0x0294
-#define RX_CRX_IDX			0x0298
-#define RX_DRX_IDX			0x029c
-
-/*
  * USB_DMA_CFG
  * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
  * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
@@ -343,1448 +65,16 @@
 #define USB_CYC_CFG_CLOCK_CYCLE		FIELD32(0x000000ff)
 
 /*
- * PBF_SYS_CTRL
- * HOST_RAM_WRITE: enable Host program ram write selection
- */
-#define PBF_SYS_CTRL			0x0400
-#define PBF_SYS_CTRL_READY		FIELD32(0x00000080)
-#define PBF_SYS_CTRL_HOST_RAM_WRITE	FIELD32(0x00010000)
-
-/*
- * PBF registers
- * Most are for debug. Driver doesn't touch PBF register.
- */
-#define PBF_CFG				0x0408
-#define PBF_MAX_PCNT			0x040c
-#define PBF_CTRL			0x0410
-#define PBF_INT_STA			0x0414
-#define PBF_INT_ENA			0x0418
-
-/*
- * BCN_OFFSET0:
- */
-#define BCN_OFFSET0			0x042c
-#define BCN_OFFSET0_BCN0		FIELD32(0x000000ff)
-#define BCN_OFFSET0_BCN1		FIELD32(0x0000ff00)
-#define BCN_OFFSET0_BCN2		FIELD32(0x00ff0000)
-#define BCN_OFFSET0_BCN3		FIELD32(0xff000000)
-
-/*
- * BCN_OFFSET1:
- */
-#define BCN_OFFSET1			0x0430
-#define BCN_OFFSET1_BCN4		FIELD32(0x000000ff)
-#define BCN_OFFSET1_BCN5		FIELD32(0x0000ff00)
-#define BCN_OFFSET1_BCN6		FIELD32(0x00ff0000)
-#define BCN_OFFSET1_BCN7		FIELD32(0xff000000)
-
-/*
- * PBF registers
- * Most are for debug. Driver doesn't touch PBF register.
- */
-#define TXRXQ_PCNT			0x0438
-#define PBF_DBG				0x043c
-
-/*
- * RF registers
- */
-#define	RF_CSR_CFG			0x0500
-#define RF_CSR_CFG_DATA			FIELD32(0x000000ff)
-#define RF_CSR_CFG_REGNUM		FIELD32(0x00001f00)
-#define RF_CSR_CFG_WRITE		FIELD32(0x00010000)
-#define RF_CSR_CFG_BUSY			FIELD32(0x00020000)
-
-/*
- * MAC Control/Status Registers(CSR).
- * Some values are set in TU, whereas 1 TU == 1024 us.
- */
-
-/*
- * MAC_CSR0: ASIC revision number.
- * ASIC_REV: 0
- * ASIC_VER: 2870
- */
-#define MAC_CSR0			0x1000
-#define MAC_CSR0_ASIC_REV		FIELD32(0x0000ffff)
-#define MAC_CSR0_ASIC_VER		FIELD32(0xffff0000)
-
-/*
- * MAC_SYS_CTRL:
- */
-#define MAC_SYS_CTRL			0x1004
-#define MAC_SYS_CTRL_RESET_CSR		FIELD32(0x00000001)
-#define MAC_SYS_CTRL_RESET_BBP		FIELD32(0x00000002)
-#define MAC_SYS_CTRL_ENABLE_TX		FIELD32(0x00000004)
-#define MAC_SYS_CTRL_ENABLE_RX		FIELD32(0x00000008)
-#define MAC_SYS_CTRL_CONTINUOUS_TX	FIELD32(0x00000010)
-#define MAC_SYS_CTRL_LOOPBACK		FIELD32(0x00000020)
-#define MAC_SYS_CTRL_WLAN_HALT		FIELD32(0x00000040)
-#define MAC_SYS_CTRL_RX_TIMESTAMP	FIELD32(0x00000080)
-
-/*
- * MAC_ADDR_DW0: STA MAC register 0
- */
-#define MAC_ADDR_DW0			0x1008
-#define MAC_ADDR_DW0_BYTE0		FIELD32(0x000000ff)
-#define MAC_ADDR_DW0_BYTE1		FIELD32(0x0000ff00)
-#define MAC_ADDR_DW0_BYTE2		FIELD32(0x00ff0000)
-#define MAC_ADDR_DW0_BYTE3		FIELD32(0xff000000)
-
-/*
- * MAC_ADDR_DW1: STA MAC register 1
- * UNICAST_TO_ME_MASK:
- * Used to mask off bits from byte 5 of the MAC address
- * to determine the UNICAST_TO_ME bit for RX frames.
- * The full mask is complemented by BSS_ID_MASK:
- *    MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
- */
-#define MAC_ADDR_DW1			0x100c
-#define MAC_ADDR_DW1_BYTE4		FIELD32(0x000000ff)
-#define MAC_ADDR_DW1_BYTE5		FIELD32(0x0000ff00)
-#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK	FIELD32(0x00ff0000)
-
-/*
- * MAC_BSSID_DW0: BSSID register 0
- */
-#define MAC_BSSID_DW0			0x1010
-#define MAC_BSSID_DW0_BYTE0		FIELD32(0x000000ff)
-#define MAC_BSSID_DW0_BYTE1		FIELD32(0x0000ff00)
-#define MAC_BSSID_DW0_BYTE2		FIELD32(0x00ff0000)
-#define MAC_BSSID_DW0_BYTE3		FIELD32(0xff000000)
-
-/*
- * MAC_BSSID_DW1: BSSID register 1
- * BSS_ID_MASK:
- *     0: 1-BSSID mode (BSS index = 0)
- *     1: 2-BSSID mode (BSS index: Byte5, bit 0)
- *     2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
- *     3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
- * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
- * BSSID. This will make sure that those bits will be ignored
- * when determining the MY_BSS of RX frames.
- */
-#define MAC_BSSID_DW1			0x1014
-#define MAC_BSSID_DW1_BYTE4		FIELD32(0x000000ff)
-#define MAC_BSSID_DW1_BYTE5		FIELD32(0x0000ff00)
-#define MAC_BSSID_DW1_BSS_ID_MASK	FIELD32(0x00030000)
-#define MAC_BSSID_DW1_BSS_BCN_NUM	FIELD32(0x001c0000)
-
-/*
- * MAX_LEN_CFG: Maximum frame length register.
- * MAX_MPDU: rt2860b max 16k bytes
- * MAX_PSDU: Maximum PSDU length
- *	(power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
- */
-#define MAX_LEN_CFG			0x1018
-#define MAX_LEN_CFG_MAX_MPDU		FIELD32(0x00000fff)
-#define MAX_LEN_CFG_MAX_PSDU		FIELD32(0x00003000)
-#define MAX_LEN_CFG_MIN_PSDU		FIELD32(0x0000c000)
-#define MAX_LEN_CFG_MIN_MPDU		FIELD32(0x000f0000)
-
-/*
- * BBP_CSR_CFG: BBP serial control register
- * VALUE: Register value to program into BBP
- * REG_NUM: Selected BBP register
- * READ_CONTROL: 0 write BBP, 1 read BBP
- * BUSY: ASIC is busy executing BBP commands
- * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
- * BBP_RW_MODE: 0 serial, 1 paralell
- */
-#define BBP_CSR_CFG			0x101c
-#define BBP_CSR_CFG_VALUE		FIELD32(0x000000ff)
-#define BBP_CSR_CFG_REGNUM		FIELD32(0x0000ff00)
-#define BBP_CSR_CFG_READ_CONTROL	FIELD32(0x00010000)
-#define BBP_CSR_CFG_BUSY		FIELD32(0x00020000)
-#define BBP_CSR_CFG_BBP_PAR_DUR		FIELD32(0x00040000)
-#define BBP_CSR_CFG_BBP_RW_MODE		FIELD32(0x00080000)
-
-/*
- * RF_CSR_CFG0: RF control register
- * REGID_AND_VALUE: Register value to program into RF
- * BITWIDTH: Selected RF register
- * STANDBYMODE: 0 high when standby, 1 low when standby
- * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
- * BUSY: ASIC is busy executing RF commands
- */
-#define RF_CSR_CFG0			0x1020
-#define RF_CSR_CFG0_REGID_AND_VALUE	FIELD32(0x00ffffff)
-#define RF_CSR_CFG0_BITWIDTH		FIELD32(0x1f000000)
-#define RF_CSR_CFG0_REG_VALUE_BW	FIELD32(0x1fffffff)
-#define RF_CSR_CFG0_STANDBYMODE		FIELD32(0x20000000)
-#define RF_CSR_CFG0_SEL			FIELD32(0x40000000)
-#define RF_CSR_CFG0_BUSY		FIELD32(0x80000000)
-
-/*
- * RF_CSR_CFG1: RF control register
- * REGID_AND_VALUE: Register value to program into RF
- * RFGAP: Gap between BB_CONTROL_RF and RF_LE
- *        0: 3 system clock cycle (37.5usec)
- *        1: 5 system clock cycle (62.5usec)
- */
-#define RF_CSR_CFG1			0x1024
-#define RF_CSR_CFG1_REGID_AND_VALUE	FIELD32(0x00ffffff)
-#define RF_CSR_CFG1_RFGAP		FIELD32(0x1f000000)
-
-/*
- * RF_CSR_CFG2: RF control register
- * VALUE: Register value to program into RF
- * RFGAP: Gap between BB_CONTROL_RF and RF_LE
- *        0: 3 system clock cycle (37.5usec)
- *        1: 5 system clock cycle (62.5usec)
- */
-#define RF_CSR_CFG2			0x1028
-#define RF_CSR_CFG2_VALUE		FIELD32(0x00ffffff)
-
-/*
- * LED_CFG: LED control
- * color LED's:
- *   0: off
- *   1: blinking upon TX2
- *   2: periodic slow blinking
- *   3: always on
- * LED polarity:
- *   0: active low
- *   1: active high
- */
-#define LED_CFG				0x102c
-#define LED_CFG_ON_PERIOD		FIELD32(0x000000ff)
-#define LED_CFG_OFF_PERIOD		FIELD32(0x0000ff00)
-#define LED_CFG_SLOW_BLINK_PERIOD	FIELD32(0x003f0000)
-#define LED_CFG_R_LED_MODE		FIELD32(0x03000000)
-#define LED_CFG_G_LED_MODE		FIELD32(0x0c000000)
-#define LED_CFG_Y_LED_MODE		FIELD32(0x30000000)
-#define LED_CFG_LED_POLAR		FIELD32(0x40000000)
-
-/*
- * XIFS_TIME_CFG: MAC timing
- * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
- * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
- * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
- *	when MAC doesn't reference BBP signal BBRXEND
- * EIFS: unit 1us
- * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
- *
- */
-#define XIFS_TIME_CFG			0x1100
-#define XIFS_TIME_CFG_CCKM_SIFS_TIME	FIELD32(0x000000ff)
-#define XIFS_TIME_CFG_OFDM_SIFS_TIME	FIELD32(0x0000ff00)
-#define XIFS_TIME_CFG_OFDM_XIFS_TIME	FIELD32(0x000f0000)
-#define XIFS_TIME_CFG_EIFS		FIELD32(0x1ff00000)
-#define XIFS_TIME_CFG_BB_RXEND_ENABLE	FIELD32(0x20000000)
-
-/*
- * BKOFF_SLOT_CFG:
- */
-#define BKOFF_SLOT_CFG			0x1104
-#define BKOFF_SLOT_CFG_SLOT_TIME	FIELD32(0x000000ff)
-#define BKOFF_SLOT_CFG_CC_DELAY_TIME	FIELD32(0x0000ff00)
-
-/*
- * NAV_TIME_CFG:
- */
-#define NAV_TIME_CFG			0x1108
-#define NAV_TIME_CFG_SIFS		FIELD32(0x000000ff)
-#define NAV_TIME_CFG_SLOT_TIME		FIELD32(0x0000ff00)
-#define NAV_TIME_CFG_EIFS		FIELD32(0x01ff0000)
-#define NAV_TIME_ZERO_SIFS		FIELD32(0x02000000)
-
-/*
- * CH_TIME_CFG: count as channel busy
- */
-#define CH_TIME_CFG     	        0x110c
-
-/*
- * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
- */
-#define PBF_LIFE_TIMER     	        0x1110
-
-/*
- * BCN_TIME_CFG:
- * BEACON_INTERVAL: in unit of 1/16 TU
- * TSF_TICKING: Enable TSF auto counting
- * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
- * BEACON_GEN: Enable beacon generator
- */
-#define BCN_TIME_CFG			0x1114
-#define BCN_TIME_CFG_BEACON_INTERVAL	FIELD32(0x0000ffff)
-#define BCN_TIME_CFG_TSF_TICKING	FIELD32(0x00010000)
-#define BCN_TIME_CFG_TSF_SYNC		FIELD32(0x00060000)
-#define BCN_TIME_CFG_TBTT_ENABLE	FIELD32(0x00080000)
-#define BCN_TIME_CFG_BEACON_GEN		FIELD32(0x00100000)
-#define BCN_TIME_CFG_TX_TIME_COMPENSATE	FIELD32(0xf0000000)
-
-/*
- * TBTT_SYNC_CFG:
- */
-#define TBTT_SYNC_CFG			0x1118
-
-/*
- * TSF_TIMER_DW0: Local lsb TSF timer, read-only
- */
-#define TSF_TIMER_DW0			0x111c
-#define TSF_TIMER_DW0_LOW_WORD		FIELD32(0xffffffff)
-
-/*
- * TSF_TIMER_DW1: Local msb TSF timer, read-only
- */
-#define TSF_TIMER_DW1			0x1120
-#define TSF_TIMER_DW1_HIGH_WORD		FIELD32(0xffffffff)
-
-/*
- * TBTT_TIMER: TImer remains till next TBTT, read-only
- */
-#define TBTT_TIMER			0x1124
-
-/*
- * INT_TIMER_CFG:
- */
-#define INT_TIMER_CFG			0x1128
-
-/*
- * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
- */
-#define INT_TIMER_EN			0x112c
-
-/*
- * CH_IDLE_STA: channel idle time
- */
-#define CH_IDLE_STA			0x1130
-
-/*
- * CH_BUSY_STA: channel busy time
- */
-#define CH_BUSY_STA			0x1134
-
-/*
- * MAC_STATUS_CFG:
- * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
- *	if 1 or higher one of the 2 registers is busy.
- */
-#define MAC_STATUS_CFG			0x1200
-#define MAC_STATUS_CFG_BBP_RF_BUSY	FIELD32(0x00000003)
-
-/*
- * PWR_PIN_CFG:
- */
-#define PWR_PIN_CFG			0x1204
-
-/*
- * AUTOWAKEUP_CFG: Manual power control / status register
- * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
- * AUTOWAKE: 0:sleep, 1:awake
- */
-#define AUTOWAKEUP_CFG			0x1208
-#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME	FIELD32(0x000000ff)
-#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE	FIELD32(0x00007f00)
-#define AUTOWAKEUP_CFG_AUTOWAKE		FIELD32(0x00008000)
-
-/*
- * EDCA_AC0_CFG:
- */
-#define EDCA_AC0_CFG			0x1300
-#define EDCA_AC0_CFG_TX_OP		FIELD32(0x000000ff)
-#define EDCA_AC0_CFG_AIFSN		FIELD32(0x00000f00)
-#define EDCA_AC0_CFG_CWMIN		FIELD32(0x0000f000)
-#define EDCA_AC0_CFG_CWMAX		FIELD32(0x000f0000)
-
-/*
- * EDCA_AC1_CFG:
- */
-#define EDCA_AC1_CFG			0x1304
-#define EDCA_AC1_CFG_TX_OP		FIELD32(0x000000ff)
-#define EDCA_AC1_CFG_AIFSN		FIELD32(0x00000f00)
-#define EDCA_AC1_CFG_CWMIN		FIELD32(0x0000f000)
-#define EDCA_AC1_CFG_CWMAX		FIELD32(0x000f0000)
-
-/*
- * EDCA_AC2_CFG:
- */
-#define EDCA_AC2_CFG			0x1308
-#define EDCA_AC2_CFG_TX_OP		FIELD32(0x000000ff)
-#define EDCA_AC2_CFG_AIFSN		FIELD32(0x00000f00)
-#define EDCA_AC2_CFG_CWMIN		FIELD32(0x0000f000)
-#define EDCA_AC2_CFG_CWMAX		FIELD32(0x000f0000)
-
-/*
- * EDCA_AC3_CFG:
- */
-#define EDCA_AC3_CFG			0x130c
-#define EDCA_AC3_CFG_TX_OP		FIELD32(0x000000ff)
-#define EDCA_AC3_CFG_AIFSN		FIELD32(0x00000f00)
-#define EDCA_AC3_CFG_CWMIN		FIELD32(0x0000f000)
-#define EDCA_AC3_CFG_CWMAX		FIELD32(0x000f0000)
-
-/*
- * EDCA_TID_AC_MAP:
- */
-#define EDCA_TID_AC_MAP			0x1310
-
-/*
- * TX_PWR_CFG_0:
- */
-#define TX_PWR_CFG_0			0x1314
-#define TX_PWR_CFG_0_1MBS		FIELD32(0x0000000f)
-#define TX_PWR_CFG_0_2MBS		FIELD32(0x000000f0)
-#define TX_PWR_CFG_0_55MBS		FIELD32(0x00000f00)
-#define TX_PWR_CFG_0_11MBS		FIELD32(0x0000f000)
-#define TX_PWR_CFG_0_6MBS		FIELD32(0x000f0000)
-#define TX_PWR_CFG_0_9MBS		FIELD32(0x00f00000)
-#define TX_PWR_CFG_0_12MBS		FIELD32(0x0f000000)
-#define TX_PWR_CFG_0_18MBS		FIELD32(0xf0000000)
-
-/*
- * TX_PWR_CFG_1:
- */
-#define TX_PWR_CFG_1			0x1318
-#define TX_PWR_CFG_1_24MBS		FIELD32(0x0000000f)
-#define TX_PWR_CFG_1_36MBS		FIELD32(0x000000f0)
-#define TX_PWR_CFG_1_48MBS		FIELD32(0x00000f00)
-#define TX_PWR_CFG_1_54MBS		FIELD32(0x0000f000)
-#define TX_PWR_CFG_1_MCS0		FIELD32(0x000f0000)
-#define TX_PWR_CFG_1_MCS1		FIELD32(0x00f00000)
-#define TX_PWR_CFG_1_MCS2		FIELD32(0x0f000000)
-#define TX_PWR_CFG_1_MCS3		FIELD32(0xf0000000)
-
-/*
- * TX_PWR_CFG_2:
- */
-#define TX_PWR_CFG_2			0x131c
-#define TX_PWR_CFG_2_MCS4		FIELD32(0x0000000f)
-#define TX_PWR_CFG_2_MCS5		FIELD32(0x000000f0)
-#define TX_PWR_CFG_2_MCS6		FIELD32(0x00000f00)
-#define TX_PWR_CFG_2_MCS7		FIELD32(0x0000f000)
-#define TX_PWR_CFG_2_MCS8		FIELD32(0x000f0000)
-#define TX_PWR_CFG_2_MCS9		FIELD32(0x00f00000)
-#define TX_PWR_CFG_2_MCS10		FIELD32(0x0f000000)
-#define TX_PWR_CFG_2_MCS11		FIELD32(0xf0000000)
-
-/*
- * TX_PWR_CFG_3:
- */
-#define TX_PWR_CFG_3			0x1320
-#define TX_PWR_CFG_3_MCS12		FIELD32(0x0000000f)
-#define TX_PWR_CFG_3_MCS13		FIELD32(0x000000f0)
-#define TX_PWR_CFG_3_MCS14		FIELD32(0x00000f00)
-#define TX_PWR_CFG_3_MCS15		FIELD32(0x0000f000)
-#define TX_PWR_CFG_3_UKNOWN1		FIELD32(0x000f0000)
-#define TX_PWR_CFG_3_UKNOWN2		FIELD32(0x00f00000)
-#define TX_PWR_CFG_3_UKNOWN3		FIELD32(0x0f000000)
-#define TX_PWR_CFG_3_UKNOWN4		FIELD32(0xf0000000)
-
-/*
- * TX_PWR_CFG_4:
- */
-#define TX_PWR_CFG_4			0x1324
-#define TX_PWR_CFG_4_UKNOWN5		FIELD32(0x0000000f)
-#define TX_PWR_CFG_4_UKNOWN6		FIELD32(0x000000f0)
-#define TX_PWR_CFG_4_UKNOWN7		FIELD32(0x00000f00)
-#define TX_PWR_CFG_4_UKNOWN8		FIELD32(0x0000f000)
-
-/*
- * TX_PIN_CFG:
- */
-#define TX_PIN_CFG			0x1328
-#define TX_PIN_CFG_PA_PE_A0_EN		FIELD32(0x00000001)
-#define TX_PIN_CFG_PA_PE_G0_EN		FIELD32(0x00000002)
-#define TX_PIN_CFG_PA_PE_A1_EN		FIELD32(0x00000004)
-#define TX_PIN_CFG_PA_PE_G1_EN		FIELD32(0x00000008)
-#define TX_PIN_CFG_PA_PE_A0_POL		FIELD32(0x00000010)
-#define TX_PIN_CFG_PA_PE_G0_POL		FIELD32(0x00000020)
-#define TX_PIN_CFG_PA_PE_A1_POL		FIELD32(0x00000040)
-#define TX_PIN_CFG_PA_PE_G1_POL		FIELD32(0x00000080)
-#define TX_PIN_CFG_LNA_PE_A0_EN		FIELD32(0x00000100)
-#define TX_PIN_CFG_LNA_PE_G0_EN		FIELD32(0x00000200)
-#define TX_PIN_CFG_LNA_PE_A1_EN		FIELD32(0x00000400)
-#define TX_PIN_CFG_LNA_PE_G1_EN		FIELD32(0x00000800)
-#define TX_PIN_CFG_LNA_PE_A0_POL	FIELD32(0x00001000)
-#define TX_PIN_CFG_LNA_PE_G0_POL	FIELD32(0x00002000)
-#define TX_PIN_CFG_LNA_PE_A1_POL	FIELD32(0x00004000)
-#define TX_PIN_CFG_LNA_PE_G1_POL	FIELD32(0x00008000)
-#define TX_PIN_CFG_RFTR_EN		FIELD32(0x00010000)
-#define TX_PIN_CFG_RFTR_POL		FIELD32(0x00020000)
-#define TX_PIN_CFG_TRSW_EN		FIELD32(0x00040000)
-#define TX_PIN_CFG_TRSW_POL		FIELD32(0x00080000)
-
-/*
- * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
- */
-#define TX_BAND_CFG			0x132c
-#define TX_BAND_CFG_HT40_PLUS		FIELD32(0x00000001)
-#define TX_BAND_CFG_A			FIELD32(0x00000002)
-#define TX_BAND_CFG_BG			FIELD32(0x00000004)
-
-/*
- * TX_SW_CFG0:
- */
-#define TX_SW_CFG0			0x1330
-
-/*
- * TX_SW_CFG1:
- */
-#define TX_SW_CFG1			0x1334
-
-/*
- * TX_SW_CFG2:
- */
-#define TX_SW_CFG2			0x1338
-
-/*
- * TXOP_THRES_CFG:
- */
-#define TXOP_THRES_CFG			0x133c
-
-/*
- * TXOP_CTRL_CFG:
- */
-#define TXOP_CTRL_CFG			0x1340
-
-/*
- * TX_RTS_CFG:
- * RTS_THRES: unit:byte
- * RTS_FBK_EN: enable rts rate fallback
- */
-#define TX_RTS_CFG			0x1344
-#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT	FIELD32(0x000000ff)
-#define TX_RTS_CFG_RTS_THRES		FIELD32(0x00ffff00)
-#define TX_RTS_CFG_RTS_FBK_EN		FIELD32(0x01000000)
-
-/*
- * TX_TIMEOUT_CFG:
- * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
- * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
- * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
- *                it is recommended that:
- *                (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
- */
-#define TX_TIMEOUT_CFG			0x1348
-#define TX_TIMEOUT_CFG_MPDU_LIFETIME	FIELD32(0x000000f0)
-#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT	FIELD32(0x0000ff00)
-#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT	FIELD32(0x00ff0000)
-
-/*
- * TX_RTY_CFG:
- * SHORT_RTY_LIMIT: short retry limit
- * LONG_RTY_LIMIT: long retry limit
- * LONG_RTY_THRE: Long retry threshoold
- * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
- *                   0:expired by retry limit, 1: expired by mpdu life timer
- * AGG_RTY_MODE: Aggregate MPDU retry mode
- *               0:expired by retry limit, 1: expired by mpdu life timer
- * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
- */
-#define TX_RTY_CFG			0x134c
-#define TX_RTY_CFG_SHORT_RTY_LIMIT	FIELD32(0x000000ff)
-#define TX_RTY_CFG_LONG_RTY_LIMIT	FIELD32(0x0000ff00)
-#define TX_RTY_CFG_LONG_RTY_THRE	FIELD32(0x0fff0000)
-#define TX_RTY_CFG_NON_AGG_RTY_MODE	FIELD32(0x10000000)
-#define TX_RTY_CFG_AGG_RTY_MODE		FIELD32(0x20000000)
-#define TX_RTY_CFG_TX_AUTO_FB_ENABLE	FIELD32(0x40000000)
-
-/*
- * TX_LINK_CFG:
- * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
- * MFB_ENABLE: TX apply remote MFB 1:enable
- * REMOTE_UMFS_ENABLE: remote unsolicit  MFB enable
- *                     0: not apply remote remote unsolicit (MFS=7)
- * TX_MRQ_EN: MCS request TX enable
- * TX_RDG_EN: RDG TX enable
- * TX_CF_ACK_EN: Piggyback CF-ACK enable
- * REMOTE_MFB: remote MCS feedback
- * REMOTE_MFS: remote MCS feedback sequence number
- */
-#define TX_LINK_CFG			0x1350
-#define TX_LINK_CFG_REMOTE_MFB_LIFETIME	FIELD32(0x000000ff)
-#define TX_LINK_CFG_MFB_ENABLE		FIELD32(0x00000100)
-#define TX_LINK_CFG_REMOTE_UMFS_ENABLE	FIELD32(0x00000200)
-#define TX_LINK_CFG_TX_MRQ_EN		FIELD32(0x00000400)
-#define TX_LINK_CFG_TX_RDG_EN		FIELD32(0x00000800)
-#define TX_LINK_CFG_TX_CF_ACK_EN	FIELD32(0x00001000)
-#define TX_LINK_CFG_REMOTE_MFB		FIELD32(0x00ff0000)
-#define TX_LINK_CFG_REMOTE_MFS		FIELD32(0xff000000)
-
-/*
- * HT_FBK_CFG0:
- */
-#define HT_FBK_CFG0			0x1354
-#define HT_FBK_CFG0_HTMCS0FBK		FIELD32(0x0000000f)
-#define HT_FBK_CFG0_HTMCS1FBK		FIELD32(0x000000f0)
-#define HT_FBK_CFG0_HTMCS2FBK		FIELD32(0x00000f00)
-#define HT_FBK_CFG0_HTMCS3FBK		FIELD32(0x0000f000)
-#define HT_FBK_CFG0_HTMCS4FBK		FIELD32(0x000f0000)
-#define HT_FBK_CFG0_HTMCS5FBK		FIELD32(0x00f00000)
-#define HT_FBK_CFG0_HTMCS6FBK		FIELD32(0x0f000000)
-#define HT_FBK_CFG0_HTMCS7FBK		FIELD32(0xf0000000)
-
-/*
- * HT_FBK_CFG1:
- */
-#define HT_FBK_CFG1			0x1358
-#define HT_FBK_CFG1_HTMCS8FBK		FIELD32(0x0000000f)
-#define HT_FBK_CFG1_HTMCS9FBK		FIELD32(0x000000f0)
-#define HT_FBK_CFG1_HTMCS10FBK		FIELD32(0x00000f00)
-#define HT_FBK_CFG1_HTMCS11FBK		FIELD32(0x0000f000)
-#define HT_FBK_CFG1_HTMCS12FBK		FIELD32(0x000f0000)
-#define HT_FBK_CFG1_HTMCS13FBK		FIELD32(0x00f00000)
-#define HT_FBK_CFG1_HTMCS14FBK		FIELD32(0x0f000000)
-#define HT_FBK_CFG1_HTMCS15FBK		FIELD32(0xf0000000)
-
-/*
- * LG_FBK_CFG0:
- */
-#define LG_FBK_CFG0			0x135c
-#define LG_FBK_CFG0_OFDMMCS0FBK		FIELD32(0x0000000f)
-#define LG_FBK_CFG0_OFDMMCS1FBK		FIELD32(0x000000f0)
-#define LG_FBK_CFG0_OFDMMCS2FBK		FIELD32(0x00000f00)
-#define LG_FBK_CFG0_OFDMMCS3FBK		FIELD32(0x0000f000)
-#define LG_FBK_CFG0_OFDMMCS4FBK		FIELD32(0x000f0000)
-#define LG_FBK_CFG0_OFDMMCS5FBK		FIELD32(0x00f00000)
-#define LG_FBK_CFG0_OFDMMCS6FBK		FIELD32(0x0f000000)
-#define LG_FBK_CFG0_OFDMMCS7FBK		FIELD32(0xf0000000)
-
-/*
- * LG_FBK_CFG1:
- */
-#define LG_FBK_CFG1			0x1360
-#define LG_FBK_CFG0_CCKMCS0FBK		FIELD32(0x0000000f)
-#define LG_FBK_CFG0_CCKMCS1FBK		FIELD32(0x000000f0)
-#define LG_FBK_CFG0_CCKMCS2FBK		FIELD32(0x00000f00)
-#define LG_FBK_CFG0_CCKMCS3FBK		FIELD32(0x0000f000)
-
-/*
- * CCK_PROT_CFG: CCK Protection
- * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
- * PROTECT_CTRL: Protection control frame type for CCK TX
- *               0:none, 1:RTS/CTS, 2:CTS-to-self
- * PROTECT_NAV: TXOP protection type for CCK TX
- *              0:none, 1:ShortNAVprotect, 2:LongNAVProtect
- * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
- * RTS_TH_EN: RTS threshold enable on CCK TX
- */
-#define CCK_PROT_CFG			0x1364
-#define CCK_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define CCK_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define CCK_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define CCK_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * OFDM_PROT_CFG: OFDM Protection
- */
-#define OFDM_PROT_CFG			0x1368
-#define OFDM_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define OFDM_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define OFDM_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define OFDM_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * MM20_PROT_CFG: MM20 Protection
- */
-#define MM20_PROT_CFG			0x136c
-#define MM20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define MM20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define MM20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define MM20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * MM40_PROT_CFG: MM40 Protection
- */
-#define MM40_PROT_CFG			0x1370
-#define MM40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define MM40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define MM40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define MM40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * GF20_PROT_CFG: GF20 Protection
- */
-#define GF20_PROT_CFG			0x1374
-#define GF20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define GF20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define GF20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define GF20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * GF40_PROT_CFG: GF40 Protection
- */
-#define GF40_PROT_CFG			0x1378
-#define GF40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define GF40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define GF40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define GF40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * EXP_CTS_TIME:
- */
-#define EXP_CTS_TIME			0x137c
-
-/*
- * EXP_ACK_TIME:
- */
-#define EXP_ACK_TIME			0x1380
-
-/*
- * RX_FILTER_CFG: RX configuration register.
- */
-#define RX_FILTER_CFG			0x1400
-#define RX_FILTER_CFG_DROP_CRC_ERROR	FIELD32(0x00000001)
-#define RX_FILTER_CFG_DROP_PHY_ERROR	FIELD32(0x00000002)
-#define RX_FILTER_CFG_DROP_NOT_TO_ME	FIELD32(0x00000004)
-#define RX_FILTER_CFG_DROP_NOT_MY_BSSD	FIELD32(0x00000008)
-#define RX_FILTER_CFG_DROP_VER_ERROR	FIELD32(0x00000010)
-#define RX_FILTER_CFG_DROP_MULTICAST	FIELD32(0x00000020)
-#define RX_FILTER_CFG_DROP_BROADCAST	FIELD32(0x00000040)
-#define RX_FILTER_CFG_DROP_DUPLICATE	FIELD32(0x00000080)
-#define RX_FILTER_CFG_DROP_CF_END_ACK	FIELD32(0x00000100)
-#define RX_FILTER_CFG_DROP_CF_END	FIELD32(0x00000200)
-#define RX_FILTER_CFG_DROP_ACK		FIELD32(0x00000400)
-#define RX_FILTER_CFG_DROP_CTS		FIELD32(0x00000800)
-#define RX_FILTER_CFG_DROP_RTS		FIELD32(0x00001000)
-#define RX_FILTER_CFG_DROP_PSPOLL	FIELD32(0x00002000)
-#define RX_FILTER_CFG_DROP_BA		FIELD32(0x00004000)
-#define RX_FILTER_CFG_DROP_BAR		FIELD32(0x00008000)
-#define RX_FILTER_CFG_DROP_CNTL		FIELD32(0x00010000)
-
-/*
- * AUTO_RSP_CFG:
- * AUTORESPONDER: 0: disable, 1: enable
- * BAC_ACK_POLICY: 0:long, 1:short preamble
- * CTS_40_MMODE: Response CTS 40MHz duplicate mode
- * CTS_40_MREF: Response CTS 40MHz duplicate mode
- * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
- * DUAL_CTS_EN: Power bit value in control frame
- * ACK_CTS_PSM_BIT:Power bit value in control frame
- */
-#define AUTO_RSP_CFG			0x1404
-#define AUTO_RSP_CFG_AUTORESPONDER	FIELD32(0x00000001)
-#define AUTO_RSP_CFG_BAC_ACK_POLICY	FIELD32(0x00000002)
-#define AUTO_RSP_CFG_CTS_40_MMODE	FIELD32(0x00000004)
-#define AUTO_RSP_CFG_CTS_40_MREF	FIELD32(0x00000008)
-#define AUTO_RSP_CFG_AR_PREAMBLE	FIELD32(0x00000010)
-#define AUTO_RSP_CFG_DUAL_CTS_EN	FIELD32(0x00000040)
-#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT	FIELD32(0x00000080)
-
-/*
- * LEGACY_BASIC_RATE:
- */
-#define LEGACY_BASIC_RATE		0x1408
-
-/*
- * HT_BASIC_RATE:
- */
-#define HT_BASIC_RATE			0x140c
-
-/*
- * HT_CTRL_CFG:
- */
-#define HT_CTRL_CFG			0x1410
-
-/*
- * SIFS_COST_CFG:
- */
-#define SIFS_COST_CFG			0x1414
-
-/*
- * RX_PARSER_CFG:
- * Set NAV for all received frames
- */
-#define RX_PARSER_CFG			0x1418
-
-/*
- * TX_SEC_CNT0:
- */
-#define TX_SEC_CNT0			0x1500
-
-/*
- * RX_SEC_CNT0:
- */
-#define RX_SEC_CNT0			0x1504
-
-/*
- * CCMP_FC_MUTE:
- */
-#define CCMP_FC_MUTE			0x1508
-
-/*
- * TXOP_HLDR_ADDR0:
- */
-#define TXOP_HLDR_ADDR0			0x1600
-
-/*
- * TXOP_HLDR_ADDR1:
- */
-#define TXOP_HLDR_ADDR1			0x1604
-
-/*
- * TXOP_HLDR_ET:
- */
-#define TXOP_HLDR_ET			0x1608
-
-/*
- * QOS_CFPOLL_RA_DW0:
- */
-#define QOS_CFPOLL_RA_DW0		0x160c
-
-/*
- * QOS_CFPOLL_RA_DW1:
- */
-#define QOS_CFPOLL_RA_DW1		0x1610
-
-/*
- * QOS_CFPOLL_QC:
- */
-#define QOS_CFPOLL_QC			0x1614
-
-/*
- * RX_STA_CNT0: RX PLCP error count & RX CRC error count
- */
-#define RX_STA_CNT0			0x1700
-#define RX_STA_CNT0_CRC_ERR		FIELD32(0x0000ffff)
-#define RX_STA_CNT0_PHY_ERR		FIELD32(0xffff0000)
-
-/*
- * RX_STA_CNT1: RX False CCA count & RX LONG frame count
- */
-#define RX_STA_CNT1			0x1704
-#define RX_STA_CNT1_FALSE_CCA		FIELD32(0x0000ffff)
-#define RX_STA_CNT1_PLCP_ERR		FIELD32(0xffff0000)
-
-/*
- * RX_STA_CNT2:
- */
-#define RX_STA_CNT2			0x1708
-#define RX_STA_CNT2_RX_DUPLI_COUNT	FIELD32(0x0000ffff)
-#define RX_STA_CNT2_RX_FIFO_OVERFLOW	FIELD32(0xffff0000)
-
-/*
- * TX_STA_CNT0: TX Beacon count
- */
-#define TX_STA_CNT0			0x170c
-#define TX_STA_CNT0_TX_FAIL_COUNT	FIELD32(0x0000ffff)
-#define TX_STA_CNT0_TX_BEACON_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_STA_CNT1: TX tx count
- */
-#define TX_STA_CNT1			0x1710
-#define TX_STA_CNT1_TX_SUCCESS		FIELD32(0x0000ffff)
-#define TX_STA_CNT1_TX_RETRANSMIT	FIELD32(0xffff0000)
-
-/*
- * TX_STA_CNT2: TX tx count
- */
-#define TX_STA_CNT2			0x1714
-#define TX_STA_CNT2_TX_ZERO_LEN_COUNT	FIELD32(0x0000ffff)
-#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_STA_FIFO: TX Result for specific PID status fifo register
- */
-#define TX_STA_FIFO			0x1718
-#define TX_STA_FIFO_VALID		FIELD32(0x00000001)
-#define TX_STA_FIFO_PID_TYPE		FIELD32(0x0000001e)
-#define TX_STA_FIFO_TX_SUCCESS		FIELD32(0x00000020)
-#define TX_STA_FIFO_TX_AGGRE		FIELD32(0x00000040)
-#define TX_STA_FIFO_TX_ACK_REQUIRED	FIELD32(0x00000080)
-#define TX_STA_FIFO_WCID		FIELD32(0x0000ff00)
-#define TX_STA_FIFO_SUCCESS_RATE	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT: Debug counter
- */
-#define TX_AGG_CNT			0x171c
-#define TX_AGG_CNT_NON_AGG_TX_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT_AGG_TX_COUNT		FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT0:
- */
-#define TX_AGG_CNT0			0x1720
-#define TX_AGG_CNT0_AGG_SIZE_1_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT0_AGG_SIZE_2_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT1:
- */
-#define TX_AGG_CNT1			0x1724
-#define TX_AGG_CNT1_AGG_SIZE_3_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT1_AGG_SIZE_4_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT2:
- */
-#define TX_AGG_CNT2			0x1728
-#define TX_AGG_CNT2_AGG_SIZE_5_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT2_AGG_SIZE_6_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT3:
- */
-#define TX_AGG_CNT3			0x172c
-#define TX_AGG_CNT3_AGG_SIZE_7_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT3_AGG_SIZE_8_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT4:
- */
-#define TX_AGG_CNT4			0x1730
-#define TX_AGG_CNT4_AGG_SIZE_9_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT4_AGG_SIZE_10_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT5:
- */
-#define TX_AGG_CNT5			0x1734
-#define TX_AGG_CNT5_AGG_SIZE_11_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT5_AGG_SIZE_12_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT6:
- */
-#define TX_AGG_CNT6			0x1738
-#define TX_AGG_CNT6_AGG_SIZE_13_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT6_AGG_SIZE_14_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT7:
- */
-#define TX_AGG_CNT7			0x173c
-#define TX_AGG_CNT7_AGG_SIZE_15_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT7_AGG_SIZE_16_COUNT	FIELD32(0xffff0000)
-
-/*
- * MPDU_DENSITY_CNT:
- * TX_ZERO_DEL: TX zero length delimiter count
- * RX_ZERO_DEL: RX zero length delimiter count
- */
-#define MPDU_DENSITY_CNT		0x1740
-#define MPDU_DENSITY_CNT_TX_ZERO_DEL	FIELD32(0x0000ffff)
-#define MPDU_DENSITY_CNT_RX_ZERO_DEL	FIELD32(0xffff0000)
-
-/*
- * Security key table memory.
- * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
- * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
- * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
- * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
- * SHARED_KEY_TABLE_BASE: 32 bytes * 32-entry
- * SHARED_KEY_MODE_BASE: 4 bits * 32-entry
- */
-#define MAC_WCID_BASE			0x1800
-#define PAIRWISE_KEY_TABLE_BASE		0x4000
-#define MAC_IVEIV_TABLE_BASE		0x6000
-#define MAC_WCID_ATTRIBUTE_BASE		0x6800
-#define SHARED_KEY_TABLE_BASE		0x6c00
-#define SHARED_KEY_MODE_BASE		0x7000
-
-#define MAC_WCID_ENTRY(__idx) \
-	( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
-#define PAIRWISE_KEY_ENTRY(__idx) \
-	( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
-#define MAC_IVEIV_ENTRY(__idx) \
-	( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
-#define MAC_WCID_ATTR_ENTRY(__idx) \
-	( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
-#define SHARED_KEY_ENTRY(__idx) \
-	( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
-#define SHARED_KEY_MODE_ENTRY(__idx) \
-	( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
-
-struct mac_wcid_entry {
-	u8 mac[6];
-	u8 reserved[2];
-} __attribute__ ((packed));
-
-struct hw_key_entry {
-	u8 key[16];
-	u8 tx_mic[8];
-	u8 rx_mic[8];
-} __attribute__ ((packed));
-
-struct mac_iveiv_entry {
-	u8 iv[8];
-} __attribute__ ((packed));
-
-/*
- * MAC_WCID_ATTRIBUTE:
- */
-#define MAC_WCID_ATTRIBUTE_KEYTAB	FIELD32(0x00000001)
-#define MAC_WCID_ATTRIBUTE_CIPHER	FIELD32(0x0000000e)
-#define MAC_WCID_ATTRIBUTE_BSS_IDX	FIELD32(0x00000070)
-#define MAC_WCID_ATTRIBUTE_RX_WIUDF	FIELD32(0x00000380)
-
-/*
- * SHARED_KEY_MODE:
- */
-#define SHARED_KEY_MODE_BSS0_KEY0	FIELD32(0x00000007)
-#define SHARED_KEY_MODE_BSS0_KEY1	FIELD32(0x00000070)
-#define SHARED_KEY_MODE_BSS0_KEY2	FIELD32(0x00000700)
-#define SHARED_KEY_MODE_BSS0_KEY3	FIELD32(0x00007000)
-#define SHARED_KEY_MODE_BSS1_KEY0	FIELD32(0x00070000)
-#define SHARED_KEY_MODE_BSS1_KEY1	FIELD32(0x00700000)
-#define SHARED_KEY_MODE_BSS1_KEY2	FIELD32(0x07000000)
-#define SHARED_KEY_MODE_BSS1_KEY3	FIELD32(0x70000000)
-
-/*
- * HOST-MCU communication
- */
-
-/*
- * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
- */
-#define H2M_MAILBOX_CSR			0x7010
-#define H2M_MAILBOX_CSR_ARG0		FIELD32(0x000000ff)
-#define H2M_MAILBOX_CSR_ARG1		FIELD32(0x0000ff00)
-#define H2M_MAILBOX_CSR_CMD_TOKEN	FIELD32(0x00ff0000)
-#define H2M_MAILBOX_CSR_OWNER		FIELD32(0xff000000)
-
-/*
- * H2M_MAILBOX_CID:
- */
-#define H2M_MAILBOX_CID			0x7014
-#define H2M_MAILBOX_CID_CMD0		FIELD32(0x000000ff)
-#define H2M_MAILBOX_CID_CMD1		FIELD32(0x0000ff00)
-#define H2M_MAILBOX_CID_CMD2		FIELD32(0x00ff0000)
-#define H2M_MAILBOX_CID_CMD3		FIELD32(0xff000000)
-
-/*
- * H2M_MAILBOX_STATUS:
- */
-#define H2M_MAILBOX_STATUS		0x701c
-
-/*
- * H2M_INT_SRC:
- */
-#define H2M_INT_SRC			0x7024
-
-/*
- * H2M_BBP_AGENT:
- */
-#define H2M_BBP_AGENT			0x7028
-
-/*
- * MCU_LEDCS: LED control for MCU Mailbox.
- */
-#define MCU_LEDCS_LED_MODE		FIELD8(0x1f)
-#define MCU_LEDCS_POLARITY		FIELD8(0x01)
-
-/*
- * HW_CS_CTS_BASE:
- * Carrier-sense CTS frame base address.
- * It's where mac stores carrier-sense frame for carrier-sense function.
- */
-#define HW_CS_CTS_BASE			0x7700
-
-/*
- * HW_DFS_CTS_BASE:
- * FS CTS frame base address. It's where mac stores CTS frame for DFS.
- */
-#define HW_DFS_CTS_BASE			0x7780
-
-/*
- * TXRX control registers - base address 0x3000
- */
-
-/*
- * TXRX_CSR1:
- * rt2860b  UNKNOWN reg use R/O Reg Addr 0x77d0 first..
- */
-#define TXRX_CSR1			0x77d0
-
-/*
- * HW_DEBUG_SETTING_BASE:
- * since NULL frame won't be that long (256 byte)
- * We steal 16 tail bytes to save debugging settings
- */
-#define HW_DEBUG_SETTING_BASE		0x77f0
-#define HW_DEBUG_SETTING_BASE2		0x7770
-
-/*
- * HW_BEACON_BASE
- * In order to support maximum 8 MBSS and its maximum length
- * is 512 bytes for each beacon
- * Three section discontinue memory segments will be used.
- * 1. The original region for BCN 0~3
- * 2. Extract memory from FCE table for BCN 4~5
- * 3. Extract memory from Pair-wise key table for BCN 6~7
- *    It occupied those memory of wcid 238~253 for BCN 6
- *    and wcid 222~237 for BCN 7
- *
- * IMPORTANT NOTE: Not sure why legacy driver does this,
- * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
- */
-#define HW_BEACON_BASE0			0x7800
-#define HW_BEACON_BASE1			0x7a00
-#define HW_BEACON_BASE2			0x7c00
-#define HW_BEACON_BASE3			0x7e00
-#define HW_BEACON_BASE4			0x7200
-#define HW_BEACON_BASE5			0x7400
-#define HW_BEACON_BASE6			0x5dc0
-#define HW_BEACON_BASE7			0x5bc0
-
-#define HW_BEACON_OFFSET(__index) \
-	( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
-	  (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
-	  (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
-
-/*
  * 8051 firmware image.
  */
 #define FIRMWARE_RT2870			"rt2870.bin"
 #define FIRMWARE_IMAGE_BASE		0x3000
 
 /*
- * BBP registers.
- * The wordsize of the BBP is 8 bits.
- */
-
-/*
- * BBP 1: TX Antenna
- */
-#define BBP1_TX_POWER			FIELD8(0x07)
-#define BBP1_TX_ANTENNA			FIELD8(0x18)
-
-/*
- * BBP 3: RX Antenna
- */
-#define BBP3_RX_ANTENNA			FIELD8(0x18)
-#define BBP3_HT40_PLUS			FIELD8(0x20)
-
-/*
- * BBP 4: Bandwidth
- */
-#define BBP4_TX_BF			FIELD8(0x01)
-#define BBP4_BANDWIDTH			FIELD8(0x18)
-
-/*
- * RFCSR registers
- * The wordsize of the RFCSR is 8 bits.
- */
-
-/*
- * RFCSR 6:
- */
-#define RFCSR6_R			FIELD8(0x03)
-
-/*
- * RFCSR 7:
- */
-#define RFCSR7_RF_TUNING		FIELD8(0x01)
-
-/*
- * RFCSR 12:
- */
-#define RFCSR12_TX_POWER		FIELD8(0x1f)
-
-/*
- * RFCSR 22:
- */
-#define RFCSR22_BASEBAND_LOOPBACK	FIELD8(0x01)
-
-/*
- * RFCSR 23:
- */
-#define RFCSR23_FREQ_OFFSET		FIELD8(0x7f)
-
-/*
- * RFCSR 30:
- */
-#define RFCSR30_RF_CALIBRATION		FIELD8(0x80)
-
-/*
- * RF registers
- */
-
-/*
- * RF 2
- */
-#define RF2_ANTENNA_RX2			FIELD32(0x00000040)
-#define RF2_ANTENNA_TX1			FIELD32(0x00004000)
-#define RF2_ANTENNA_RX1			FIELD32(0x00020000)
-
-/*
- * RF 3
- */
-#define RF3_TXPOWER_G			FIELD32(0x00003e00)
-#define RF3_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000200)
-#define RF3_TXPOWER_A			FIELD32(0x00003c00)
-
-/*
- * RF 4
- */
-#define RF4_TXPOWER_G			FIELD32(0x000007c0)
-#define RF4_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000040)
-#define RF4_TXPOWER_A			FIELD32(0x00000780)
-#define RF4_FREQ_OFFSET			FIELD32(0x001f8000)
-#define RF4_HT40			FIELD32(0x00200000)
-
-/*
- * EEPROM content.
- * The wordsize of the EEPROM is 16 bits.
- */
-
-/*
- * EEPROM Version
- */
-#define EEPROM_VERSION			0x0001
-#define EEPROM_VERSION_FAE		FIELD16(0x00ff)
-#define EEPROM_VERSION_VERSION		FIELD16(0xff00)
-
-/*
- * HW MAC address.
- */
-#define EEPROM_MAC_ADDR_0		0x0002
-#define EEPROM_MAC_ADDR_BYTE0		FIELD16(0x00ff)
-#define EEPROM_MAC_ADDR_BYTE1		FIELD16(0xff00)
-#define EEPROM_MAC_ADDR_1		0x0003
-#define EEPROM_MAC_ADDR_BYTE2		FIELD16(0x00ff)
-#define EEPROM_MAC_ADDR_BYTE3		FIELD16(0xff00)
-#define EEPROM_MAC_ADDR_2		0x0004
-#define EEPROM_MAC_ADDR_BYTE4		FIELD16(0x00ff)
-#define EEPROM_MAC_ADDR_BYTE5		FIELD16(0xff00)
-
-/*
- * EEPROM ANTENNA config
- * RXPATH: 1: 1R, 2: 2R, 3: 3R
- * TXPATH: 1: 1T, 2: 2T
- */
-#define	EEPROM_ANTENNA			0x001a
-#define EEPROM_ANTENNA_RXPATH		FIELD16(0x000f)
-#define EEPROM_ANTENNA_TXPATH		FIELD16(0x00f0)
-#define EEPROM_ANTENNA_RF_TYPE		FIELD16(0x0f00)
-
-/*
- * EEPROM NIC config
- * CARDBUS_ACCEL: 0 - enable, 1 - disable
- */
-#define	EEPROM_NIC			0x001b
-#define EEPROM_NIC_HW_RADIO		FIELD16(0x0001)
-#define EEPROM_NIC_DYNAMIC_TX_AGC	FIELD16(0x0002)
-#define EEPROM_NIC_EXTERNAL_LNA_BG	FIELD16(0x0004)
-#define EEPROM_NIC_EXTERNAL_LNA_A	FIELD16(0x0008)
-#define EEPROM_NIC_CARDBUS_ACCEL	FIELD16(0x0010)
-#define EEPROM_NIC_BW40M_SB_BG		FIELD16(0x0020)
-#define EEPROM_NIC_BW40M_SB_A		FIELD16(0x0040)
-#define EEPROM_NIC_WPS_PBC		FIELD16(0x0080)
-#define EEPROM_NIC_BW40M_BG		FIELD16(0x0100)
-#define EEPROM_NIC_BW40M_A		FIELD16(0x0200)
-
-/*
- * EEPROM frequency
- */
-#define	EEPROM_FREQ			0x001d
-#define EEPROM_FREQ_OFFSET		FIELD16(0x00ff)
-#define EEPROM_FREQ_LED_MODE		FIELD16(0x7f00)
-#define EEPROM_FREQ_LED_POLARITY	FIELD16(0x1000)
-
-/*
- * EEPROM LED
- * POLARITY_RDY_G: Polarity RDY_G setting.
- * POLARITY_RDY_A: Polarity RDY_A setting.
- * POLARITY_ACT: Polarity ACT setting.
- * POLARITY_GPIO_0: Polarity GPIO0 setting.
- * POLARITY_GPIO_1: Polarity GPIO1 setting.
- * POLARITY_GPIO_2: Polarity GPIO2 setting.
- * POLARITY_GPIO_3: Polarity GPIO3 setting.
- * POLARITY_GPIO_4: Polarity GPIO4 setting.
- * LED_MODE: Led mode.
- */
-#define EEPROM_LED1			0x001e
-#define EEPROM_LED2			0x001f
-#define EEPROM_LED3			0x0020
-#define EEPROM_LED_POLARITY_RDY_BG	FIELD16(0x0001)
-#define EEPROM_LED_POLARITY_RDY_A	FIELD16(0x0002)
-#define EEPROM_LED_POLARITY_ACT		FIELD16(0x0004)
-#define EEPROM_LED_POLARITY_GPIO_0	FIELD16(0x0008)
-#define EEPROM_LED_POLARITY_GPIO_1	FIELD16(0x0010)
-#define EEPROM_LED_POLARITY_GPIO_2	FIELD16(0x0020)
-#define EEPROM_LED_POLARITY_GPIO_3	FIELD16(0x0040)
-#define EEPROM_LED_POLARITY_GPIO_4	FIELD16(0x0080)
-#define EEPROM_LED_LED_MODE		FIELD16(0x1f00)
-
-/*
- * EEPROM LNA
- */
-#define EEPROM_LNA			0x0022
-#define EEPROM_LNA_BG			FIELD16(0x00ff)
-#define EEPROM_LNA_A0			FIELD16(0xff00)
-
-/*
- * EEPROM RSSI BG offset
- */
-#define EEPROM_RSSI_BG			0x0023
-#define EEPROM_RSSI_BG_OFFSET0		FIELD16(0x00ff)
-#define EEPROM_RSSI_BG_OFFSET1		FIELD16(0xff00)
-
-/*
- * EEPROM RSSI BG2 offset
- */
-#define EEPROM_RSSI_BG2			0x0024
-#define EEPROM_RSSI_BG2_OFFSET2		FIELD16(0x00ff)
-#define EEPROM_RSSI_BG2_LNA_A1		FIELD16(0xff00)
-
-/*
- * EEPROM RSSI A offset
- */
-#define EEPROM_RSSI_A			0x0025
-#define EEPROM_RSSI_A_OFFSET0		FIELD16(0x00ff)
-#define EEPROM_RSSI_A_OFFSET1		FIELD16(0xff00)
-
-/*
- * EEPROM RSSI A2 offset
- */
-#define EEPROM_RSSI_A2			0x0026
-#define EEPROM_RSSI_A2_OFFSET2		FIELD16(0x00ff)
-#define EEPROM_RSSI_A2_LNA_A2		FIELD16(0xff00)
-
-/*
- * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
- *	This is delta in 40MHZ.
- * VALUE: Tx Power dalta value (MAX=4)
- * TYPE: 1: Plus the delta value, 0: minus the delta value
- * TXPOWER: Enable:
- */
-#define EEPROM_TXPOWER_DELTA		0x0028
-#define EEPROM_TXPOWER_DELTA_VALUE	FIELD16(0x003f)
-#define EEPROM_TXPOWER_DELTA_TYPE	FIELD16(0x0040)
-#define EEPROM_TXPOWER_DELTA_TXPOWER	FIELD16(0x0080)
-
-/*
- * EEPROM TXPOWER 802.11BG
- */
-#define	EEPROM_TXPOWER_BG1		0x0029
-#define	EEPROM_TXPOWER_BG2		0x0030
-#define EEPROM_TXPOWER_BG_SIZE		7
-#define EEPROM_TXPOWER_BG_1		FIELD16(0x00ff)
-#define EEPROM_TXPOWER_BG_2		FIELD16(0xff00)
-
-/*
- * EEPROM TXPOWER 802.11A
- */
-#define EEPROM_TXPOWER_A1		0x003c
-#define EEPROM_TXPOWER_A2		0x0053
-#define EEPROM_TXPOWER_A_SIZE		6
-#define EEPROM_TXPOWER_A_1		FIELD16(0x00ff)
-#define EEPROM_TXPOWER_A_2		FIELD16(0xff00)
-
-/*
- * EEPROM TXpower byrate: 20MHZ power
- */
-#define EEPROM_TXPOWER_BYRATE		0x006f
-
-/*
- * EEPROM BBP.
- */
-#define	EEPROM_BBP_START		0x0078
-#define EEPROM_BBP_SIZE			16
-#define EEPROM_BBP_VALUE		FIELD16(0x00ff)
-#define EEPROM_BBP_REG_ID		FIELD16(0xff00)
-
-/*
- * MCU mailbox commands.
- */
-#define MCU_SLEEP			0x30
-#define MCU_WAKEUP			0x31
-#define MCU_RADIO_OFF			0x35
-#define MCU_CURRENT			0x36
-#define MCU_LED				0x50
-#define MCU_LED_STRENGTH		0x51
-#define MCU_LED_1			0x52
-#define MCU_LED_2			0x53
-#define MCU_LED_3			0x54
-#define MCU_RADAR			0x60
-#define MCU_BOOT_SIGNAL			0x72
-#define MCU_BBP_SIGNAL			0x80
-#define MCU_POWER_SAVE			0x83
-
-/*
- * MCU mailbox tokens
- */
-#define TOKEN_WAKUP			3
-
-/*
  * DMA descriptor defines.
  */
-#define TXD_DESC_SIZE			( 4 * sizeof(__le32) )
 #define TXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
-#define TXWI_DESC_SIZE			( 4 * sizeof(__le32) )
-#define RXD_DESC_SIZE			( 1 * sizeof(__le32) )
-#define RXWI_DESC_SIZE			( 4 * sizeof(__le32) )
-
-/*
- * TX descriptor format for TX, PRIO and Beacon Ring.
- */
-
-/*
- * Word0
- */
-#define TXD_W0_SD_PTR0			FIELD32(0xffffffff)
-
-/*
- * Word1
- */
-#define TXD_W1_SD_LEN1			FIELD32(0x00003fff)
-#define TXD_W1_LAST_SEC1		FIELD32(0x00004000)
-#define TXD_W1_BURST			FIELD32(0x00008000)
-#define TXD_W1_SD_LEN0			FIELD32(0x3fff0000)
-#define TXD_W1_LAST_SEC0		FIELD32(0x40000000)
-#define TXD_W1_DMA_DONE			FIELD32(0x80000000)
-
-/*
- * Word2
- */
-#define TXD_W2_SD_PTR1			FIELD32(0xffffffff)
-
-/*
- * Word3
- * WIV: Wireless Info Valid. 1: Driver filled WI,  0: DMA needs to copy WI
- * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
- *       0:MGMT, 1:HCCA 2:EDCA
- */
-#define TXD_W3_WIV			FIELD32(0x01000000)
-#define TXD_W3_QSEL			FIELD32(0x06000000)
-#define TXD_W3_TCO			FIELD32(0x20000000)
-#define TXD_W3_UCO			FIELD32(0x40000000)
-#define TXD_W3_ICO			FIELD32(0x80000000)
+#define RXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
 
 /*
  * TX Info structure
@@ -1807,52 +97,6 @@ struct mac_iveiv_entry {
 #define TXINFO_W0_USB_DMA_TX_BURST	FIELD32(0x80000000)
 
 /*
- * TX WI structure
- */
-
-/*
- * Word0
- * FRAG: 1 To inform TKIP engine this is a fragment.
- * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
- * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
- * BW: Channel bandwidth 20MHz or 40 MHz
- * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
- */
-#define TXWI_W0_FRAG			FIELD32(0x00000001)
-#define TXWI_W0_MIMO_PS			FIELD32(0x00000002)
-#define TXWI_W0_CF_ACK			FIELD32(0x00000004)
-#define TXWI_W0_TS			FIELD32(0x00000008)
-#define TXWI_W0_AMPDU			FIELD32(0x00000010)
-#define TXWI_W0_MPDU_DENSITY		FIELD32(0x000000e0)
-#define TXWI_W0_TX_OP			FIELD32(0x00000300)
-#define TXWI_W0_MCS			FIELD32(0x007f0000)
-#define TXWI_W0_BW			FIELD32(0x00800000)
-#define TXWI_W0_SHORT_GI		FIELD32(0x01000000)
-#define TXWI_W0_STBC			FIELD32(0x06000000)
-#define TXWI_W0_IFS			FIELD32(0x08000000)
-#define TXWI_W0_PHYMODE			FIELD32(0xc0000000)
-
-/*
- * Word1
- */
-#define TXWI_W1_ACK			FIELD32(0x00000001)
-#define TXWI_W1_NSEQ			FIELD32(0x00000002)
-#define TXWI_W1_BW_WIN_SIZE		FIELD32(0x000000fc)
-#define TXWI_W1_WIRELESS_CLI_ID		FIELD32(0x0000ff00)
-#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
-#define TXWI_W1_PACKETID		FIELD32(0xf0000000)
-
-/*
- * Word2
- */
-#define TXWI_W2_IV			FIELD32(0xffffffff)
-
-/*
- * Word3
- */
-#define TXWI_W3_EIV			FIELD32(0xffffffff)
-
-/*
  * RX descriptor format for RX Ring.
  */
 
@@ -1888,64 +132,4 @@ struct mac_iveiv_entry {
 #define RXD_W0_LAST_AMSDU		FIELD32(0x00080000)
 #define RXD_W0_PLCP_SIGNAL		FIELD32(0xfff00000)
 
-/*
- * RX WI structure
- */
-
-/*
- * Word0
- */
-#define RXWI_W0_WIRELESS_CLI_ID		FIELD32(0x000000ff)
-#define RXWI_W0_KEY_INDEX		FIELD32(0x00000300)
-#define RXWI_W0_BSSID			FIELD32(0x00001c00)
-#define RXWI_W0_UDF			FIELD32(0x0000e000)
-#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
-#define RXWI_W0_TID			FIELD32(0xf0000000)
-
-/*
- * Word1
- */
-#define RXWI_W1_FRAG			FIELD32(0x0000000f)
-#define RXWI_W1_SEQUENCE		FIELD32(0x0000fff0)
-#define RXWI_W1_MCS			FIELD32(0x007f0000)
-#define RXWI_W1_BW			FIELD32(0x00800000)
-#define RXWI_W1_SHORT_GI		FIELD32(0x01000000)
-#define RXWI_W1_STBC			FIELD32(0x06000000)
-#define RXWI_W1_PHYMODE			FIELD32(0xc0000000)
-
-/*
- * Word2
- */
-#define RXWI_W2_RSSI0			FIELD32(0x000000ff)
-#define RXWI_W2_RSSI1			FIELD32(0x0000ff00)
-#define RXWI_W2_RSSI2			FIELD32(0x00ff0000)
-
-/*
- * Word3
- */
-#define RXWI_W3_SNR0			FIELD32(0x000000ff)
-#define RXWI_W3_SNR1			FIELD32(0x0000ff00)
-
-/*
- * Macros for converting txpower from EEPROM to mac80211 value
- * and from mac80211 value to register value.
- */
-#define MIN_G_TXPOWER	0
-#define MIN_A_TXPOWER	-7
-#define MAX_G_TXPOWER	31
-#define MAX_A_TXPOWER	15
-#define DEFAULT_TXPOWER	5
-
-#define TXPOWER_G_FROM_DEV(__txpower) \
-	((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-
-#define TXPOWER_G_TO_DEV(__txpower) \
-	clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
-
-#define TXPOWER_A_FROM_DEV(__txpower) \
-	((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-
-#define TXPOWER_A_TO_DEV(__txpower) \
-	clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
-
 #endif /* RT2800USB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 196de8ab815..c83dbaefd57 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -144,6 +144,11 @@ struct avg_val {
 	int avg_weight;
 };
 
+enum rt2x00_chip_intf {
+	RT2X00_CHIP_INTF_PCI,
+	RT2X00_CHIP_INTF_USB,
+};
+
 /*
  * Chipset identification
  * The chipset on the device is composed of a RT and RF chip.
@@ -169,6 +174,8 @@ struct rt2x00_chip {
 
 	u16 rf;
 	u32 rev;
+
+	enum rt2x00_chip_intf intf;
 };
 
 /*
@@ -842,9 +849,23 @@ struct rt2x00_dev {
 	 * Firmware image.
 	 */
 	const struct firmware *fw;
+
+	/*
+	 * Driver specific data.
+	 */
+	void *priv;
 };
 
 /*
+ * Register defines.
+ * Some registers require multiple attempts before success,
+ * in those cases REGISTER_BUSY_COUNT attempts should be
+ * taken with a REGISTER_BUSY_DELAY interval.
+ */
+#define REGISTER_BUSY_COUNT	5
+#define REGISTER_BUSY_DELAY	100
+
+/*
  * Generic RF access.
  * The RF is being accessed by word index.
  */
@@ -932,6 +953,28 @@ static inline bool rt2x00_check_rev(const struct rt2x00_chip *chipset,
 	return ((chipset->rev & mask) == rev);
 }
 
+static inline void rt2x00_set_chip_intf(struct rt2x00_dev *rt2x00dev,
+					enum rt2x00_chip_intf intf)
+{
+	rt2x00dev->chip.intf = intf;
+}
+
+static inline bool rt2x00_intf(const struct rt2x00_chip *chipset,
+			       enum rt2x00_chip_intf intf)
+{
+	return (chipset->intf == intf);
+}
+
+static inline bool rt2x00_intf_is_pci(struct rt2x00_dev *rt2x00dev)
+{
+	return rt2x00_intf(&rt2x00dev->chip, RT2X00_CHIP_INTF_PCI);
+}
+
+static inline bool rt2x00_intf_is_usb(struct rt2x00_dev *rt2x00dev)
+{
+	return rt2x00_intf(&rt2x00dev->chip, RT2X00_CHIP_INTF_USB);
+}
+
 /**
  * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes.
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.h b/drivers/net/wireless/rt2x00/rt2x00leds.h
index 1046977e6a1..8e03c045e03 100644
--- a/drivers/net/wireless/rt2x00/rt2x00leds.h
+++ b/drivers/net/wireless/rt2x00/rt2x00leds.h
@@ -33,8 +33,6 @@ enum led_type {
 	LED_TYPE_QUALITY,
 };
 
-#ifdef CONFIG_RT2X00_LIB_LEDS
-
 struct rt2x00_led {
 	struct rt2x00_dev *rt2x00dev;
 	struct led_classdev led_dev;
@@ -45,6 +43,4 @@ struct rt2x00_led {
 #define LED_REGISTERED		( 1 << 1 )
 };
 
-#endif /* CONFIG_RT2X00_LIB_LEDS */
-
 #endif /* RT2X00LEDS_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h
index 15a12487e04..ae33eebe9a6 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -35,15 +35,6 @@
 #define PCI_DEVICE_DATA(__ops)	.driver_data = (kernel_ulong_t)(__ops)
 
 /*
- * Register defines.
- * Some registers require multiple attempts before success,
- * in those cases REGISTER_BUSY_COUNT attempts should be
- * taken with a REGISTER_BUSY_DELAY interval.
- */
-#define REGISTER_BUSY_COUNT	5
-#define REGISTER_BUSY_DELAY	100
-
-/*
  * Register access.
  */
 static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev,
@@ -53,10 +44,9 @@ static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev,
 	*value = readl(rt2x00dev->csr.base + offset);
 }
 
-static inline void
-rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev,
-			     const unsigned int offset,
-			     void *value, const u16 length)
+static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev,
+						const unsigned int offset,
+						void *value, const u32 length)
 {
 	memcpy_fromio(value, rt2x00dev->csr.base + offset, length);
 }
@@ -68,10 +58,10 @@ static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev,
 	writel(value, rt2x00dev->csr.base + offset);
 }
 
-static inline void
-rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
-			      const unsigned int offset,
-			      const void *value, const u16 length)
+static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
+						 const unsigned int offset,
+						 const void *value,
+						 const u32 length)
 {
 	memcpy_toio(rt2x00dev->csr.base + offset, value, length);
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index f02b48a9059..c9cbdaa1073 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -160,7 +160,7 @@ EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff);
 
 int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
 			   const unsigned int offset,
-			   struct rt2x00_field32 field,
+			   const struct rt2x00_field32 field,
 			   u32 *reg)
 {
 	unsigned int i;
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index bd2d59c85f1..9943e428bc2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -39,17 +39,11 @@
 #define USB_DEVICE_DATA(__ops)	.driver_info = (kernel_ulong_t)(__ops)
 
 /*
- * Register defines.
- * Some registers require multiple attempts before success,
- * in those cases REGISTER_BUSY_COUNT attempts should be
- * taken with a REGISTER_BUSY_DELAY interval.
  * For USB vendor requests we need to pass a timeout
  * time in ms, for this we use the REGISTER_TIMEOUT,
  * however when loading firmware a higher value is
  * required. In that case we use the REGISTER_TIMEOUT_FIRMWARE.
  */
-#define REGISTER_BUSY_COUNT		5
-#define REGISTER_BUSY_DELAY		100
 #define REGISTER_TIMEOUT		500
 #define REGISTER_TIMEOUT_FIRMWARE	1000
 
@@ -232,7 +226,7 @@ static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev,
 }
 
 /**
- * rt2x00usb_regbusy_read - Read 32bit register word
+ * rt2x00usb_register_read - Read 32bit register word
  * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
  * @offset: Register offset
  * @value: Pointer to where register contents should be stored
@@ -340,12 +334,13 @@ static inline void rt2x00usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
  * through rt2x00usb_vendor_request_buff().
  */
 static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
-					       const unsigned int offset,
-					       void *value, const u32 length)
+						 const unsigned int offset,
+						 const void *value,
+						 const u32 length)
 {
 	rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
 				      USB_VENDOR_REQUEST_OUT, offset,
-				      value, length,
+				      (void *)value, length,
 				      REGISTER_TIMEOUT32(length));
 }
 
@@ -364,7 +359,7 @@ static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
  */
 int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
 			   const unsigned int offset,
-			   struct rt2x00_field32 field,
+			   const struct rt2x00_field32 field,
 			   u32 *reg);
 
 /*
diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
index bf9175a8c1f..abb4907cf29 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -119,7 +119,6 @@ struct rtl8187_priv {
 	} hw_rev;
 	struct sk_buff_head rx_queue;
 	u8 signal;
-	u8 quality;
 	u8 noise;
 	u8 slot_time;
 	u8 aifsn[4];
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 2017ccc0014..76973b8c709 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -320,7 +320,6 @@ static void rtl8187_rx_cb(struct urb *urb)
 	struct ieee80211_rx_status rx_status = { 0 };
 	int rate, signal;
 	u32 flags;
-	u32 quality;
 	unsigned long f;
 
 	spin_lock_irqsave(&priv->rx_queue.lock, f);
@@ -338,10 +337,9 @@ static void rtl8187_rx_cb(struct urb *urb)
 			(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
 		flags = le32_to_cpu(hdr->flags);
 		/* As with the RTL8187B below, the AGC is used to calculate
-		 * signal strength and quality. In this case, the scaling
+		 * signal strength. In this case, the scaling
 		 * constants are derived from the output of p54usb.
 		 */
-		quality = 130 - ((41 * hdr->agc) >> 6);
 		signal = -4 - ((27 * hdr->agc) >> 6);
 		rx_status.antenna = (hdr->signal >> 7) & 1;
 		rx_status.mactime = le64_to_cpu(hdr->mac_time);
@@ -354,23 +352,18 @@ static void rtl8187_rx_cb(struct urb *urb)
 		 * In testing, none of these quantities show qualitative
 		 * agreement with AP signal strength, except for the AGC,
 		 * which is inversely proportional to the strength of the
-		 * signal. In the following, the quality and signal strength
-		 * are derived from the AGC. The arbitrary scaling constants
+		 * signal. In the following, the signal strength
+		 * is derived from the AGC. The arbitrary scaling constants
 		 * are chosen to make the results close to the values obtained
 		 * for a BCM4312 using b43 as the driver. The noise is ignored
 		 * for now.
 		 */
 		flags = le32_to_cpu(hdr->flags);
-		quality = 170 - hdr->agc;
 		signal = 14 - hdr->agc / 2;
 		rx_status.antenna = (hdr->rssi >> 7) & 1;
 		rx_status.mactime = le64_to_cpu(hdr->mac_time);
 	}
 
-	if (quality > 100)
-		quality = 100;
-	rx_status.qual = quality;
-	priv->quality = quality;
 	rx_status.signal = signal;
 	priv->signal = signal;
 	rate = (flags >> 20) & 0xF;
diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
index 88060e11754..785e0244e30 100644
--- a/drivers/net/wireless/wl12xx/Kconfig
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -1,6 +1,6 @@
 menuconfig WL12XX
 	tristate "TI wl12xx driver support"
-	depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
+	depends on MAC80211 && EXPERIMENTAL
 	---help---
 	  This will enable TI wl12xx driver support. The drivers make
 	  use of the mac80211 stack.
@@ -42,6 +42,7 @@ config WL1251_SDIO
 config WL1271
 	tristate "TI wl1271 support"
 	depends on WL12XX && SPI_MASTER && GENERIC_HARDIRQS
+	depends on INET
 	select FW_LOADER
 	select CRC7
 	---help---
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 48b0bfd6c55..da3bf1cebc0 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -1311,7 +1311,8 @@ int wl1251_init_ieee80211(struct wl1251 *wl)
 	wl->hw->channel_change_time = 10000;
 
 	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
-		IEEE80211_HW_NOISE_DBM;
+		IEEE80211_HW_NOISE_DBM |
+		IEEE80211_HW_SUPPORTS_PS;
 
 	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 	wl->hw->wiphy->max_scan_ssids = 1;
diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 566f1521ec2..94359b1a861 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -417,6 +417,9 @@ struct wl1271 {
 	/* PSM mode requested */
 	bool psm_requested;
 
+	/* retry counter for PSM entries */
+	u8 psm_entry_retry;
+
 	/* in dBm */
 	int power_level;
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index bf5a8680a46..5cc89bbdac7 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -141,7 +141,7 @@ int wl1271_acx_tx_power(struct wl1271 *wl, int power)
 	 * calibration, to avoid distortions
 	 */
 	/* acx->current_tx_power = power * 10; */
-	acx->current_tx_power = 70;
+	acx->current_tx_power = 120;
 
 	ret = wl1271_cmd_configure(wl, DOT11_CUR_TX_PWR, acx, sizeof(*acx));
 	if (ret < 0) {
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c
index ba4a2b4f0f5..b7c96454cca 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -380,7 +380,7 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 		}
 	}
 
-	if (loop >= INIT_LOOP) {
+	if (loop > INIT_LOOP) {
 		wl1271_error("timeout waiting for the hardware to "
 			     "complete initialization");
 		return -EIO;
@@ -407,7 +407,8 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 
 	/* unmask required mbox events  */
 	wl->event_mask = BSS_LOSE_EVENT_ID |
-		SCAN_COMPLETE_EVENT_ID;
+		SCAN_COMPLETE_EVENT_ID |
+		PS_REPORT_EVENT_ID;
 
 	ret = wl1271_event_unmask(wl);
 	if (ret < 0) {
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index 0666328ce9a..990eb01b4c7 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -42,12 +42,14 @@
  * @buf: buffer containing the command, must work with dma
  * @len: length of the buffer
  */
-int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len)
+int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
+		    size_t res_len)
 {
 	struct wl1271_cmd_header *cmd;
 	unsigned long timeout;
 	u32 intr;
 	int ret = 0;
+	u16 status;
 
 	cmd = buf;
 	cmd->id = cpu_to_le16(id);
@@ -74,6 +76,17 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len)
 		intr = wl1271_spi_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
 	}
 
+	/* read back the status code of the command */
+	if (res_len == 0)
+		res_len = sizeof(struct wl1271_cmd_header);
+	wl1271_spi_read(wl, wl->cmd_box_addr, cmd, res_len, false);
+
+	status = le16_to_cpu(cmd->status);
+	if (status != CMD_STATUS_SUCCESS) {
+		wl1271_error("command execute failure %d", status);
+		ret = -EIO;
+	}
+
 	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_ACK,
 			   WL1271_ACX_INTR_CMD_COMPLETE);
 
@@ -262,7 +275,7 @@ int wl1271_cmd_join(struct wl1271 *wl)
 	wl->tx_security_seq_16 = 0;
 	wl->tx_security_seq_32 = 0;
 
-	ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
+	ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join), 0);
 	if (ret < 0) {
 		wl1271_error("failed to initiate cmd join");
 		goto out_free;
@@ -294,35 +307,21 @@ out:
 int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer)
 {
 	int ret;
+	size_t res_len = 0;
 
 	wl1271_debug(DEBUG_CMD, "cmd test");
 
-	ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len);
+	if (answer)
+		res_len = buf_len;
+
+	ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len, res_len);
 
 	if (ret < 0) {
 		wl1271_warning("TEST command failed");
 		return ret;
 	}
 
-	if (answer) {
-		struct wl1271_command *cmd_answer;
-		u16 status;
-
-		/*
-		 * The test command got in, we can read the answer.
-		 * The answer would be a wl1271_command, where the
-		 * parameter array contains the actual answer.
-		 */
-		wl1271_spi_read(wl, wl->cmd_box_addr, buf, buf_len, false);
-
-		cmd_answer = buf;
-		status = le16_to_cpu(cmd_answer->header.status);
-
-		if (status != CMD_STATUS_SUCCESS)
-			wl1271_error("TEST command answer error: %d", status);
-	}
-
-	return 0;
+	return ret;
 }
 
 /**
@@ -345,21 +344,10 @@ int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len)
 	/* payload length, does not include any headers */
 	acx->len = cpu_to_le16(len - sizeof(*acx));
 
-	ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx));
-	if (ret < 0) {
+	ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx), len);
+	if (ret < 0)
 		wl1271_error("INTERROGATE command failed");
-		goto out;
-	}
 
-	/* the interrogate command got in, we can read the answer */
-	wl1271_spi_read(wl, wl->cmd_box_addr, buf, len, false);
-
-	acx = buf;
-	if (le16_to_cpu(acx->cmd.status) != CMD_STATUS_SUCCESS)
-		wl1271_error("INTERROGATE command error: %d",
-			     le16_to_cpu(acx->cmd.status));
-
-out:
 	return ret;
 }
 
@@ -383,7 +371,7 @@ int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len)
 	/* payload length, does not include any headers */
 	acx->len = cpu_to_le16(len - sizeof(*acx));
 
-	ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len);
+	ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len, 0);
 	if (ret < 0) {
 		wl1271_warning("CONFIGURE command NOK");
 		return ret;
@@ -416,7 +404,7 @@ int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable)
 		cmd_tx = CMD_DISABLE_TX;
 	}
 
-	ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd));
+	ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_error("rx %s cmd for channel %d failed",
 			     enable ? "start" : "stop", channel);
@@ -426,7 +414,7 @@ int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable)
 	wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d",
 		     enable ? "start" : "stop", channel);
 
-	ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd));
+	ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_error("tx %s cmd for channel %d failed",
 			     enable ? "start" : "stop", channel);
@@ -468,7 +456,7 @@ int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode)
 	ps_params->null_data_rate = cpu_to_le32(1); /* 1 Mbps */
 
 	ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
-			      sizeof(*ps_params));
+			      sizeof(*ps_params), 0);
 	if (ret < 0) {
 		wl1271_error("cmd set_ps_mode failed");
 		goto out;
@@ -499,19 +487,14 @@ int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
 	cmd->addr = cpu_to_le32(addr);
 	cmd->size = cpu_to_le32(len);
 
-	ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd));
+	ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd),
+			      sizeof(*cmd));
 	if (ret < 0) {
 		wl1271_error("read memory command failed: %d", ret);
 		goto out;
 	}
 
-	/* the read command got in, we can now read the answer */
-	wl1271_spi_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd), false);
-
-	if (le16_to_cpu(cmd->header.status) != CMD_STATUS_SUCCESS)
-		wl1271_error("error in read command result: %d",
-			     le16_to_cpu(cmd->header.status));
-
+	/* the read command got in */
 	memcpy(answer, cmd->value, len);
 
 out:
@@ -613,7 +596,7 @@ int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
 	trigger->timeout = 0;
 
 	ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger,
-			      sizeof(*trigger));
+			      sizeof(*trigger), 0);
 	if (ret < 0) {
 		wl1271_error("trigger scan to failed for hw scan");
 		goto out;
@@ -636,20 +619,10 @@ int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
 		}
 	}
 
-	ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params));
+	ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params), 0);
 	if (ret < 0) {
 		wl1271_error("SCAN failed");
-		goto out;
-	}
-
-	wl1271_spi_read(wl, wl->cmd_box_addr, params, sizeof(*params),
-			false);
-
-	if (le16_to_cpu(params->header.status) != CMD_STATUS_SUCCESS) {
-		wl1271_error("Scan command error: %d",
-			     le16_to_cpu(params->header.status));
 		wl->scanning = false;
-		ret = -EIO;
 		goto out;
 	}
 
@@ -684,7 +657,7 @@ int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
 	if (buf)
 		memcpy(cmd->template_data, buf, buf_len);
 
-	ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd));
+	ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_warning("cmd set_template failed: %d", ret);
 		goto out_free;
@@ -863,7 +836,7 @@ int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id)
 	cmd->key_action = cpu_to_le16(KEY_SET_ID);
 	cmd->key_type = KEY_WEP;
 
-	ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd));
+	ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_warning("cmd set_default_wep_key failed: %d", ret);
 		goto out;
@@ -920,7 +893,7 @@ int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
 
 	wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd));
 
-	ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd));
+	ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_warning("could not set keys");
 		goto out;
@@ -950,7 +923,7 @@ int wl1271_cmd_disconnect(struct wl1271 *wl)
 	/* disconnect reason is not used in immediate disconnections */
 	cmd->type = DISCONNECT_IMMEDIATE;
 
-	ret = wl1271_cmd_send(wl, CMD_DISCONNECT, cmd, sizeof(*cmd));
+	ret = wl1271_cmd_send(wl, CMD_DISCONNECT, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_error("failed to send disconnect command");
 		goto out_free;
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h
index 174b8209dbf..9d7061b3c8a 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h
@@ -29,7 +29,8 @@
 
 struct acx_header;
 
-int wl1271_cmd_send(struct wl1271 *wl, u16 type, void *buf, size_t buf_len);
+int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
+		    size_t res_len);
 int wl1271_cmd_join(struct wl1271 *wl);
 int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
 int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index 061d47520a3..565373ede26 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -712,6 +712,14 @@ struct conf_conn_settings {
 	 * Range 0 - 255
 	 */
 	u8 bet_max_consecutive;
+
+	/*
+	 * Specifies the maximum number of times to try PSM entry if it fails
+	 * (if sending the appropriate null-func message fails.)
+	 *
+	 * Range 0 - 255
+	 */
+	u8 psm_entry_retries;
 };
 
 #define CONF_SR_ERR_TBL_MAX_VALUES   14
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
index 31d396ba918..e135d894b42 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ b/drivers/net/wireless/wl12xx/wl1271_event.c
@@ -68,6 +68,40 @@ static int wl1271_event_scan_complete(struct wl1271 *wl,
 	return 0;
 }
 
+static int wl1271_event_ps_report(struct wl1271 *wl,
+				  struct event_mailbox *mbox,
+				  bool *beacon_loss)
+{
+	int ret = 0;
+
+	wl1271_debug(DEBUG_EVENT, "ps_status: 0x%x", mbox->ps_status);
+
+	switch (mbox->ps_status) {
+	case EVENT_ENTER_POWER_SAVE_FAIL:
+		if (wl->psm_entry_retry < wl->conf.conn.psm_entry_retries) {
+			wl->psm_entry_retry++;
+			wl1271_error("PSM entry failed, retrying %d\n",
+				     wl->psm_entry_retry);
+			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+		} else {
+			wl->psm_entry_retry = 0;
+			*beacon_loss = true;
+		}
+		break;
+	case EVENT_ENTER_POWER_SAVE_SUCCESS:
+		wl->psm_entry_retry = 0;
+		break;
+	case EVENT_EXIT_POWER_SAVE_FAIL:
+		wl1271_info("PSM exit failed");
+		break;
+	case EVENT_EXIT_POWER_SAVE_SUCCESS:
+	default:
+		break;
+	}
+
+	return ret;
+}
+
 static void wl1271_event_mbox_dump(struct event_mailbox *mbox)
 {
 	wl1271_debug(DEBUG_EVENT, "MBOX DUMP:");
@@ -79,6 +113,7 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 {
 	int ret;
 	u32 vector;
+	bool beacon_loss = false;
 
 	wl1271_event_mbox_dump(mbox);
 
@@ -101,7 +136,25 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 		wl1271_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
 
 		/* indicate to the stack, that beacons have been lost */
+		beacon_loss = true;
+	}
+
+	if (vector & PS_REPORT_EVENT_ID) {
+		wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT");
+		ret = wl1271_event_ps_report(wl, mbox, &beacon_loss);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (beacon_loss) {
+		/* Obviously, it's dangerous to release the mutex while
+		   we are holding many of the variables in the wl struct.
+		   That's why it's done last in the function, and care must
+		   be taken that nothing more is done after this function
+		   returns. */
+		mutex_unlock(&wl->mutex);
 		ieee80211_beacon_loss(wl->vif);
+		mutex_lock(&wl->mutex);
 	}
 
 	return 0;
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.h b/drivers/net/wireless/wl12xx/wl1271_event.h
index 3ab53d331f1..4e3f55ebb1a 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.h
+++ b/drivers/net/wireless/wl12xx/wl1271_event.h
@@ -63,6 +63,13 @@ enum {
 	EVENT_MBOX_ALL_EVENT_ID			 = 0x7fffffff,
 };
 
+enum {
+	EVENT_ENTER_POWER_SAVE_FAIL = 0,
+	EVENT_ENTER_POWER_SAVE_SUCCESS,
+	EVENT_EXIT_POWER_SAVE_FAIL,
+	EVENT_EXIT_POWER_SAVE_SUCCESS,
+};
+
 struct event_debug_report {
 	u8 debug_event_id;
 	u8 num_params;
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index 417b4152feb..7c2017f480e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -303,12 +303,15 @@ int wl1271_hw_init(struct wl1271 *wl)
 {
 	int ret;
 
+	/* FIXME: the following parameter setting functions return error
+	 * codes - the reason is so far unknown. The -EIO is therefore
+	 * ignored for the time being. */
 	ret = wl1271_init_general_parms(wl);
-	if (ret < 0)
+	if (ret < 0 && ret != -EIO)
 		return ret;
 
 	ret = wl1271_init_radio_parms(wl);
-	if (ret < 0)
+	if (ret < 0 && ret != -EIO)
 		return ret;
 
 	/* Template settings */
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 86132bb0078..d2149fcd3cf 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -222,7 +222,8 @@ static struct conf_drv_settings default_conf = {
 			.snr_pkt_avg_weight  = 10
 		},
 		.bet_enable                  = CONF_BET_MODE_ENABLE,
-		.bet_max_consecutive         = 100
+		.bet_max_consecutive         = 100,
+		.psm_entry_retries           = 3
 	},
 	.init = {
 		.sr_err_tbl = {
@@ -973,6 +974,7 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 	wl->rx_counter = 0;
 	wl->elp = false;
 	wl->psm = 0;
+	wl->psm_entry_retry = 0;
 	wl->tx_queue_stopped = false;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
 	wl->tx_blocks_available = 0;
@@ -1067,11 +1069,11 @@ static int wl1271_op_config_interface(struct ieee80211_hw *hw,
 		ret = wl1271_cmd_join(wl);
 		if (ret < 0)
 			goto out_sleep;
-	}
 
-	ret = wl1271_cmd_build_null_data(wl);
-	if (ret < 0)
-		goto out_sleep;
+		ret = wl1271_cmd_build_null_data(wl);
+		if (ret < 0)
+			goto out_sleep;
+	}
 
 	wl->ssid_len = conf->ssid_len;
 	if (wl->ssid_len)
@@ -1137,10 +1139,6 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 		wl->channel = channel;
 	}
 
-	ret = wl1271_cmd_build_null_data(wl);
-	if (ret < 0)
-		goto out_sleep;
-
 	if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
 		wl1271_info("psm enabled");
 
@@ -1165,7 +1163,7 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 	if (conf->power_level != wl->power_level) {
 		ret = wl1271_acx_tx_power(wl, conf->power_level);
 		if (ret < 0)
-			goto out;
+			goto out_sleep;
 
 		wl->power_level = conf->power_level;
 	}
@@ -1826,6 +1824,7 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	wl->elp = false;
 	wl->psm = 0;
 	wl->psm_requested = false;
+	wl->psm_entry_retry = 0;
 	wl->tx_queue_stopped = false;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
 	wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET;
diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.c b/drivers/net/wireless/wl12xx/wl1271_rx.c
index 37d81ab6acc..ca645f38109 100644
--- a/drivers/net/wireless/wl12xx/wl1271_rx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_rx.c
@@ -159,7 +159,7 @@ static void wl1271_rx_handle_data(struct wl1271 *wl, u32 length)
 	u8 *buf;
 	u8 beacon = 0;
 
-	skb = dev_alloc_skb(length);
+	skb = __dev_alloc_skb(length, GFP_KERNEL);
 	if (!skb) {
 		wl1271_error("Couldn't allocate RX frame");
 		return;
diff --git a/drivers/net/wireless/zd1211rw/Kconfig b/drivers/net/wireless/zd1211rw/Kconfig
index 74b31eafe72..5f809695f71 100644
--- a/drivers/net/wireless/zd1211rw/Kconfig
+++ b/drivers/net/wireless/zd1211rw/Kconfig
@@ -1,6 +1,6 @@
 config ZD1211RW
 	tristate "ZyDAS ZD1211/ZD1211B USB-wireless support"
-	depends on USB && MAC80211 && WLAN_80211 && EXPERIMENTAL
+	depends on USB && MAC80211 && EXPERIMENTAL
 	select FW_LOADER
 	---help---
 	  This is an experimental driver for the ZyDAS ZD1211/ZD1211B wireless
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 9a4dd5992f6..4e3873bfd01 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -131,5 +131,13 @@ source "drivers/staging/iio/Kconfig"
 
 source "drivers/staging/cowloop/Kconfig"
 
+source "drivers/staging/strip/Kconfig"
+
+source "drivers/staging/arlan/Kconfig"
+
+source "drivers/staging/wavelan/Kconfig"
+
+source "drivers/staging/netwave/Kconfig"
+
 endif # !STAGING_EXCLUDE_BUILD
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 104f2f8897e..fb1d7851b56 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -47,3 +47,8 @@ obj-$(CONFIG_RAR_REGISTER)	+= rar/
 obj-$(CONFIG_DX_SEP)		+= sep/
 obj-$(CONFIG_IIO)		+= iio/
 obj-$(CONFIG_COWLOOP)		+= cowloop/
+obj-$(CONFIG_STRIP)		+= strip/
+obj-$(CONFIG_ARLAN)		+= arlan/
+obj-$(CONFIG_WAVELAN)		+= wavelan/
+obj-$(CONFIG_PCMCIA_WAVELAN)	+= wavelan/
+obj-$(CONFIG_PCMCIA_NETWAVE)	+= netwave/
diff --git a/drivers/staging/arlan/Kconfig b/drivers/staging/arlan/Kconfig
new file mode 100644
index 00000000000..0585ed8b4d3
--- /dev/null
+++ b/drivers/staging/arlan/Kconfig
@@ -0,0 +1,15 @@
+config ARLAN
+	tristate "Aironet Arlan 655 & IC2200 DS support"
+	depends on ISA && !64BIT
+	select WIRELESS_EXT
+	---help---
+	  Aironet makes Arlan, a class of wireless LAN adapters. These use the
+	  www.Telxon.com chip, which is also used on several similar cards.
+	  This driver is tested on the 655 and IC2200 series cards. Look at
+	  <http://www.ylenurme.ee/~elmer/655/> for the latest information.
+
+	  The driver is built as two modules, arlan and arlan-proc. The latter
+	  is the /proc interface and is not needed most of time.
+
+	  On some computers the card ends up in non-valid state after some
+	  time. Use a ping-reset script to clear it.
diff --git a/drivers/staging/arlan/Makefile b/drivers/staging/arlan/Makefile
new file mode 100644
index 00000000000..9e58e5fae7b
--- /dev/null
+++ b/drivers/staging/arlan/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_ARLAN) += arlan.o 
+
+arlan-objs := arlan-main.o arlan-proc.o
diff --git a/drivers/staging/arlan/TODO b/drivers/staging/arlan/TODO
new file mode 100644
index 00000000000..9bd15a2f6d9
--- /dev/null
+++ b/drivers/staging/arlan/TODO
@@ -0,0 +1,7 @@
+TODO:
+	- step up and maintain this driver to ensure that it continues
+	  to work.  Having the hardware for this is pretty much a
+	  requirement.  If this does not happen, the will be removed in
+	  the 2.6.35 kernel release.
+
+Please send patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/net/wireless/arlan-main.c b/drivers/staging/arlan/arlan-main.c
index 921a082487a..921a082487a 100644
--- a/drivers/net/wireless/arlan-main.c
+++ b/drivers/staging/arlan/arlan-main.c
diff --git a/drivers/net/wireless/arlan-proc.c b/drivers/staging/arlan/arlan-proc.c
index a8b689635a3..a8b689635a3 100644
--- a/drivers/net/wireless/arlan-proc.c
+++ b/drivers/staging/arlan/arlan-proc.c
diff --git a/drivers/net/wireless/arlan.h b/drivers/staging/arlan/arlan.h
index fb3ad51a1ca..fb3ad51a1ca 100644
--- a/drivers/net/wireless/arlan.h
+++ b/drivers/staging/arlan/arlan.h
diff --git a/drivers/staging/netwave/Kconfig b/drivers/staging/netwave/Kconfig
new file mode 100644
index 00000000000..c0c996c0550
--- /dev/null
+++ b/drivers/staging/netwave/Kconfig
@@ -0,0 +1,11 @@
+config PCMCIA_NETWAVE
+	tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
+	depends on PCMCIA
+	select WIRELESS_EXT
+	select WEXT_PRIV
+	help
+	  Say Y here if you intend to attach this type of PCMCIA (PC-card)
+	  wireless Ethernet networking card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called netwave_cs.  If unsure, say N.
diff --git a/drivers/staging/netwave/Makefile b/drivers/staging/netwave/Makefile
new file mode 100644
index 00000000000..2ab89de59b9
--- /dev/null
+++ b/drivers/staging/netwave/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PCMCIA_NETWAVE)	+= netwave_cs.o
diff --git a/drivers/staging/netwave/TODO b/drivers/staging/netwave/TODO
new file mode 100644
index 00000000000..9bd15a2f6d9
--- /dev/null
+++ b/drivers/staging/netwave/TODO
@@ -0,0 +1,7 @@
+TODO:
+	- step up and maintain this driver to ensure that it continues
+	  to work.  Having the hardware for this is pretty much a
+	  requirement.  If this does not happen, the will be removed in
+	  the 2.6.35 kernel release.
+
+Please send patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/staging/netwave/netwave_cs.c
index 9498b46c99a..9498b46c99a 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/staging/netwave/netwave_cs.c
diff --git a/drivers/staging/strip/Kconfig b/drivers/staging/strip/Kconfig
new file mode 100644
index 00000000000..36257b5cd6e
--- /dev/null
+++ b/drivers/staging/strip/Kconfig
@@ -0,0 +1,22 @@
+config STRIP
+	tristate "STRIP (Metricom starmode radio IP)"
+	depends on INET
+	select WIRELESS_EXT
+	---help---
+	  Say Y if you have a Metricom radio and intend to use Starmode Radio
+	  IP. STRIP is a radio protocol developed for the MosquitoNet project
+	  to send Internet traffic using Metricom radios.  Metricom radios are
+	  small, battery powered, 100kbit/sec packet radio transceivers, about
+	  the size and weight of a cellular telephone. (You may also have heard
+	  them called "Metricom modems" but we avoid the term "modem" because
+	  it misleads many people into thinking that you can plug a Metricom
+	  modem into a phone line and use it as a modem.)
+
+	  You can use STRIP on any Linux machine with a serial port, although
+	  it is obviously most useful for people with laptop computers. If you
+	  think you might get a Metricom radio in the future, there is no harm
+	  in saying Y to STRIP now, except that it makes the kernel a bit
+	  bigger.
+
+	  To compile this as a module, choose M here: the module will be
+	  called strip.
diff --git a/drivers/staging/strip/Makefile b/drivers/staging/strip/Makefile
new file mode 100644
index 00000000000..6417bdcac2f
--- /dev/null
+++ b/drivers/staging/strip/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_STRIP) += strip.o
diff --git a/drivers/staging/strip/TODO b/drivers/staging/strip/TODO
new file mode 100644
index 00000000000..9bd15a2f6d9
--- /dev/null
+++ b/drivers/staging/strip/TODO
@@ -0,0 +1,7 @@
+TODO:
+	- step up and maintain this driver to ensure that it continues
+	  to work.  Having the hardware for this is pretty much a
+	  requirement.  If this does not happen, the will be removed in
+	  the 2.6.35 kernel release.
+
+Please send patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/net/wireless/strip.c b/drivers/staging/strip/strip.c
index 698aade79d4..698aade79d4 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/staging/strip/strip.c
diff --git a/drivers/staging/wavelan/Kconfig b/drivers/staging/wavelan/Kconfig
new file mode 100644
index 00000000000..786060e025c
--- /dev/null
+++ b/drivers/staging/wavelan/Kconfig
@@ -0,0 +1,38 @@
+config WAVELAN
+	tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
+	depends on ISA
+	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
+	---help---
+	  The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
+	  a Radio LAN (wireless Ethernet-like Local Area Network) using the
+	  radio frequencies 900 MHz and 2.4 GHz.
+
+	  If you want to use an ISA WaveLAN card under Linux, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. Some more specific
+	  information is contained in
+	  <file:Documentation/networking/wavelan.txt> and in the source code
+	  <file:drivers/net/wireless/wavelan.p.h>.
+
+	  You will also need the wireless tools package available from
+	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+	  Please read the man pages contained therein.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called wavelan.
+
+config PCMCIA_WAVELAN
+	tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
+	depends on PCMCIA
+	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
+	help
+	  Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
+	  (PC-card) wireless Ethernet networking card to your computer.  This
+	  driver is for the non-IEEE-802.11 Wavelan cards.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called wavelan_cs.  If unsure, say N.
diff --git a/drivers/staging/wavelan/Makefile b/drivers/staging/wavelan/Makefile
new file mode 100644
index 00000000000..1cde17c69a4
--- /dev/null
+++ b/drivers/staging/wavelan/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_WAVELAN)		+= wavelan.o
+obj-$(CONFIG_PCMCIA_WAVELAN)	+= wavelan_cs.o
diff --git a/drivers/staging/wavelan/TODO b/drivers/staging/wavelan/TODO
new file mode 100644
index 00000000000..9bd15a2f6d9
--- /dev/null
+++ b/drivers/staging/wavelan/TODO
@@ -0,0 +1,7 @@
+TODO:
+	- step up and maintain this driver to ensure that it continues
+	  to work.  Having the hardware for this is pretty much a
+	  requirement.  If this does not happen, the will be removed in
+	  the 2.6.35 kernel release.
+
+Please send patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/net/wireless/i82586.h b/drivers/staging/wavelan/i82586.h
index 5f65b250646..5f65b250646 100644
--- a/drivers/net/wireless/i82586.h
+++ b/drivers/staging/wavelan/i82586.h
diff --git a/drivers/net/wireless/i82593.h b/drivers/staging/wavelan/i82593.h
index afac5c7a323..afac5c7a323 100644
--- a/drivers/net/wireless/i82593.h
+++ b/drivers/staging/wavelan/i82593.h
diff --git a/drivers/net/wireless/wavelan.c b/drivers/staging/wavelan/wavelan.c
index d634b2da3b8..d634b2da3b8 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/staging/wavelan/wavelan.c
diff --git a/drivers/net/wireless/wavelan.h b/drivers/staging/wavelan/wavelan.h
index 9ab360558ff..9ab360558ff 100644
--- a/drivers/net/wireless/wavelan.h
+++ b/drivers/staging/wavelan/wavelan.h
diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/staging/wavelan/wavelan.p.h
index dbe8de6e5f5..dbe8de6e5f5 100644
--- a/drivers/net/wireless/wavelan.p.h
+++ b/drivers/staging/wavelan/wavelan.p.h
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/staging/wavelan/wavelan_cs.c
index 431a20ec6db..431a20ec6db 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/staging/wavelan/wavelan_cs.c
diff --git a/drivers/net/wireless/wavelan_cs.h b/drivers/staging/wavelan/wavelan_cs.h
index 2e4bfe4147c..2e4bfe4147c 100644
--- a/drivers/net/wireless/wavelan_cs.h
+++ b/drivers/staging/wavelan/wavelan_cs.h
diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/staging/wavelan/wavelan_cs.p.h
index 81d91531c4f..81d91531c4f 100644
--- a/drivers/net/wireless/wavelan_cs.p.h
+++ b/drivers/staging/wavelan/wavelan_cs.p.h