aboutsummaryrefslogtreecommitdiff
path: root/include/asm-sh
diff options
context:
space:
mode:
authorPaul Mundt <lethal@linux-sh.org>2007-02-14 15:06:09 +0900
committerPaul Mundt <lethal@linux-sh.org>2007-02-14 15:06:09 +0900
commite65fa9f59e9230b72ac298d445b4a18a4eefeb34 (patch)
tree402036274b557da72a93b17fffc95f41c3137704 /include/asm-sh
parent71074d3a2c70aa8a213222fef5014bfd9b3daf1f (diff)
sh: Kill off dead bigsur and ec3104 boards.
Neither of these have had any maintenance in years, and there's no interest in keeping them straggling along. These have already been slated for removal some time, so finally just get rid of them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'include/asm-sh')
-rw-r--r--include/asm-sh/bigsur/bigsur.h80
-rw-r--r--include/asm-sh/bigsur/io.h35
-rw-r--r--include/asm-sh/bigsur/serial.h24
-rw-r--r--include/asm-sh/ec3104/ec3104.h43
-rw-r--r--include/asm-sh/ec3104/io.h16
-rw-r--r--include/asm-sh/ec3104/keyboard.h15
-rw-r--r--include/asm-sh/ec3104/serial.h20
-rw-r--r--include/asm-sh/irq.h4
-rw-r--r--include/asm-sh/serial.h6
9 files changed, 0 insertions, 243 deletions
diff --git a/include/asm-sh/bigsur/bigsur.h b/include/asm-sh/bigsur/bigsur.h
deleted file mode 100644
index 427245f9358..00000000000
--- a/include/asm-sh/bigsur/bigsur.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- *
- * Hitachi Big Sur Eval Board support
- *
- * Dustin McIntire (dustin@sensoria.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Derived from Hitachi SH7751 reference manual
- *
- */
-
-#ifndef _ASM_BIGSUR_H_
-#define _ASM_BIGSUR_H_
-
-#include <asm/irq.h>
-#include <asm/hd64465/hd64465.h>
-
-/* 7751 Internal IRQ's used by external CPLD controller */
-#define BIGSUR_IRQ_LOW 0
-#define BIGSUR_IRQ_NUM 14 /* External CPLD level 1 IRQs */
-#define BIGSUR_IRQ_HIGH (BIGSUR_IRQ_LOW + BIGSUR_IRQ_NUM)
-#define BIGSUR_2NDLVL_IRQ_LOW (HD64465_IRQ_BASE+HD64465_IRQ_NUM)
-#define BIGSUR_2NDLVL_IRQ_NUM 32 /* Level 2 IRQs = 4 regs * 8 bits */
-#define BIGSUR_2NDLVL_IRQ_HIGH (BIGSUR_2NDLVL_IRQ_LOW + \
- BIGSUR_2NDLVL_IRQ_NUM)
-
-/* PCI interrupt base number (A_INTA-A_INTD) */
-#define BIGSUR_SH7751_PCI_IRQ_BASE (BIGSUR_2NDLVL_IRQ_LOW+10)
-
-/* CPLD registers and external chip addresses */
-#define BIGSUR_HD64464_ADDR 0xB2000000
-#define BIGSUR_DGDR 0xB1FFFE00
-#define BIGSUR_BIDR 0xB1FFFD00
-#define BIGSUR_CSLR 0xB1FFFC00
-#define BIGSUR_SW1R 0xB1FFFB00
-#define BIGSUR_DBGR 0xB1FFFA00
-#define BIGSUR_BDTR 0xB1FFF900
-#define BIGSUR_BDRR 0xB1FFF800
-#define BIGSUR_PPR1 0xB1FFF700
-#define BIGSUR_PPR2 0xB1FFF600
-#define BIGSUR_IDE2 0xB1FFF500
-#define BIGSUR_IDE3 0xB1FFF400
-#define BIGSUR_SPCR 0xB1FFF300
-#define BIGSUR_ETHR 0xB1FE0000
-#define BIGSUR_PPDR 0xB1FDFF00
-#define BIGSUR_ICTL 0xB1FDFE00
-#define BIGSUR_ICMD 0xB1FDFD00
-#define BIGSUR_DMA0 0xB1FDFC00
-#define BIGSUR_DMA1 0xB1FDFB00
-#define BIGSUR_IRQ0 0xB1FDFA00
-#define BIGSUR_IRQ1 0xB1FDF900
-#define BIGSUR_IRQ2 0xB1FDF800
-#define BIGSUR_IRQ3 0xB1FDF700
-#define BIGSUR_IMR0 0xB1FDF600
-#define BIGSUR_IMR1 0xB1FDF500
-#define BIGSUR_IMR2 0xB1FDF400
-#define BIGSUR_IMR3 0xB1FDF300
-#define BIGSUR_IRLMR0 0xB1FDF200
-#define BIGSUR_IRLMR1 0xB1FDF100
-#define BIGSUR_V320USC_ADDR 0xB1000000
-#define BIGSUR_HD64465_ADDR 0xB0000000
-#define BIGSUR_INTERNAL_BASE 0xB0000000
-
-/* SMC ethernet card parameters */
-#define BIGSUR_ETHER_IOPORT 0x220
-
-/* IDE register paramters */
-#define BIGSUR_IDECMD_IOPORT 0x1f0
-#define BIGSUR_IDECTL_IOPORT 0x1f8
-
-/* LED bit position in BIGSUR_CSLR */
-#define BIGSUR_LED (1<<4)
-
-/* PCI: default LOCAL memory window sizes (seen from PCI bus) */
-#define BIGSUR_LSR0_SIZE (64*(1<<20)) //64MB
-#define BIGSUR_LSR1_SIZE (64*(1<<20)) //64MB
-
-#endif /* _ASM_BIGSUR_H_ */
diff --git a/include/asm-sh/bigsur/io.h b/include/asm-sh/bigsur/io.h
deleted file mode 100644
index 1470ac8d4a3..00000000000
--- a/include/asm-sh/bigsur/io.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-sh/bigsur/io.h
- *
- * By Dustin McIntire (dustin@sensoria.com) (c)2001
- * Derived from io_hd64465.h, which bore the message:
- * By Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc.
- * and from io_hd64461.h, which bore the message:
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IO functions for a Hitachi Big Sur Evaluation Board.
- */
-
-#ifndef _ASM_SH_IO_BIGSUR_H
-#define _ASM_SH_IO_BIGSUR_H
-
-#include <linux/types.h>
-
-extern unsigned long bigsur_isa_port2addr(unsigned long offset);
-extern int bigsur_irq_demux(int irq);
-/* Provision for generic secondary demux step -- used by PCMCIA code */
-extern void bigsur_register_irq_demux(int irq,
- int (*demux)(int irq, void *dev), void *dev);
-extern void bigsur_unregister_irq_demux(int irq);
-/* Set this variable to 1 to see port traffic */
-extern int bigsur_io_debug;
-/* Map a range of ports to a range of kernel virtual memory. */
-extern void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift);
-extern void bigsur_port_unmap(u32 baseport, u32 nports);
-
-#endif /* _ASM_SH_IO_BIGSUR_H */
-
diff --git a/include/asm-sh/bigsur/serial.h b/include/asm-sh/bigsur/serial.h
deleted file mode 100644
index a08fa82fe45..00000000000
--- a/include/asm-sh/bigsur/serial.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-sh/bigsur/serial.h
- *
- * Configuration details for Big Sur 16550 based serial ports
- * i.e. HD64465, PCMCIA, etc.
- */
-
-#ifndef _ASM_SERIAL_BIGSUR_H
-#define _ASM_SERIAL_BIGSUR_H
-#include <asm/hd64465.h>
-
-#define BASE_BAUD (3379200 / 16)
-
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-
-#define SERIAL_PORT_DFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */
-
-/* XXX: This should be moved ino irq.h */
-#define irq_cannonicalize(x) (x)
-
-#endif /* _ASM_SERIAL_BIGSUR_H */
diff --git a/include/asm-sh/ec3104/ec3104.h b/include/asm-sh/ec3104/ec3104.h
deleted file mode 100644
index 639cfa489c8..00000000000
--- a/include/asm-sh/ec3104/ec3104.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef __ASM_EC3104_H
-#define __ASM_EC3104_H
-
-
-/*
- * Most of the register set is at 0xb0ec0000 - 0xb0ecffff.
- *
- * as far as I've figured it out the register map is:
- * 0xb0ec0000 - id string
- * 0xb0ec0XXX - power management
- * 0xb0ec1XXX - interrupt control
- * 0xb0ec3XXX - ps2 port (touch pad on aero 8000)
- * 0xb0ec6XXX - i2c
- * 0xb0ec7000 - first serial port (proprietary connector on aero 8000)
- * 0xb0ec8000 - second serial port
- * 0xb0ec9000 - third serial port
- * 0xb0eca000 - fourth serial port (keyboard controller on aero 8000)
- * 0xb0eccXXX - GPIO
- * 0xb0ecdXXX - GPIO
- */
-
-#define EC3104_BASE 0xb0ec0000
-
-#define EC3104_SER4_DATA (EC3104_BASE+0xa000)
-#define EC3104_SER4_IIR (EC3104_BASE+0xa008)
-#define EC3104_SER4_MCR (EC3104_BASE+0xa010)
-#define EC3104_SER4_LSR (EC3104_BASE+0xa014)
-#define EC3104_SER4_MSR (EC3104_BASE+0xa018)
-
-/*
- * our ISA bus. this seems to be real ISA.
- */
-#define EC3104_ISA_BASE 0xa5000000
-
-#define EC3104_IRQ 11
-#define EC3104_IRQBASE 64
-
-#define EC3104_IRQ_SER1 EC3104_IRQBASE + 7
-#define EC3104_IRQ_SER2 EC3104_IRQBASE + 8
-#define EC3104_IRQ_SER3 EC3104_IRQBASE + 9
-#define EC3104_IRQ_SER4 EC3104_IRQBASE + 10
-
-#endif /* __ASM_EC3104_H */
diff --git a/include/asm-sh/ec3104/io.h b/include/asm-sh/ec3104/io.h
deleted file mode 100644
index ea5c8e65ac1..00000000000
--- a/include/asm-sh/ec3104/io.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _ASM_SH_IO_EC3104_H
-#define _ASM_SH_IO_EC3104_H
-
-#include <linux/types.h>
-
-extern unsigned char ec3104_inb(unsigned long port);
-extern unsigned short ec3104_inw(unsigned long port);
-extern unsigned long ec3104_inl(unsigned long port);
-
-extern void ec3104_outb(unsigned char value, unsigned long port);
-extern void ec3104_outw(unsigned short value, unsigned long port);
-extern void ec3104_outl(unsigned long value, unsigned long port);
-
-extern int ec3104_irq_demux(int irq);
-
-#endif /* _ASM_SH_IO_EC3104_H */
diff --git a/include/asm-sh/ec3104/keyboard.h b/include/asm-sh/ec3104/keyboard.h
deleted file mode 100644
index c1253a68319..00000000000
--- a/include/asm-sh/ec3104/keyboard.h
+++ /dev/null
@@ -1,15 +0,0 @@
-extern unsigned char ec3104_kbd_sysrq_xlate[];
-extern int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode);
-extern int ec3104_kbd_getkeycode(unsigned int scancode);
-extern int ec3104_kbd_translate(unsigned char, unsigned char *, char);
-extern char ec3104_kbd_unexpected_up(unsigned char);
-extern void ec3104_kbd_leds(unsigned char);
-extern void ec3104_kbd_init_hw(void);
-
-#define kbd_sysrq_xlate ec3104_kbd_sysrq_xlate
-#define kbd_setkeycode ec3104_kbd_setkeycode
-#define kbd_getkeycode ec3104_kbd_getkeycode
-#define kbd_translate ec3104_kbd_translate
-#define kbd_unexpected_up ec3104_kbd_unexpected_up
-#define kbd_leds ec3104_kbd_leds
-#define kbd_init_hw ec3104_kbd_init_hw
diff --git a/include/asm-sh/ec3104/serial.h b/include/asm-sh/ec3104/serial.h
deleted file mode 100644
index cfe4d78ec1e..00000000000
--- a/include/asm-sh/ec3104/serial.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <asm/ec3104.h>
-/* Naturally we don't know the exact value but 115200 baud has a divisor
- * of 9 and 19200 baud has a divisor of 52, so this seems like a good
- * guess. */
-#define BASE_BAUD (16800000 / 16)
-
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-/* there is a fourth serial port with the expected values as well, but
- * it's got the keyboard controller behind it so we can't really use it
- * (without moving the keyboard driver to userspace, which doesn't sound
- * like a very good idea) */
-#define SERIAL_PORT_DFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x11C00, EC3104_IRQBASE+7, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x12000, EC3104_IRQBASE+8, STD_COM_FLAGS }, /* ttyS1 */ \
- { 0, BASE_BAUD, 0x12400, EC3104_IRQBASE+9, STD_COM_FLAGS }, /* ttyS2 */
-
-/* XXX: This should be moved ino irq.h */
-#define irq_cannonicalize(x) (x)
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index bff965ef4b9..8ccf7ae593e 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -66,12 +66,8 @@
/* 3. OFFCHIP_NR_IRQS */
#if defined(CONFIG_HD64461)
# define OFFCHIP_NR_IRQS 18
-#elif defined (CONFIG_SH_BIGSUR) /* must be before CONFIG_HD64465 */
-# define OFFCHIP_NR_IRQS 48
#elif defined(CONFIG_HD64465)
# define OFFCHIP_NR_IRQS 16
-#elif defined (CONFIG_SH_EC3104)
-# define OFFCHIP_NR_IRQS 16
#elif defined (CONFIG_SH_DREAMCAST)
# define OFFCHIP_NR_IRQS 96
#elif defined (CONFIG_SH_TITAN)
diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h
index 8734590d27e..4ac0e781081 100644
--- a/include/asm-sh/serial.h
+++ b/include/asm-sh/serial.h
@@ -9,11 +9,6 @@
#include <linux/kernel.h>
-#ifdef CONFIG_SH_EC3104
-#include <asm/serial-ec3104.h>
-#elif defined (CONFIG_SH_BIGSUR)
-#include <asm/serial-bigsur.h>
-#else
/*
* This assumes you have a 1.8432 MHz clock for your UART.
*
@@ -41,5 +36,4 @@
#endif
-#endif
#endif /* _ASM_SERIAL_H */