rcu: Teach RCU that idle task is not quiscent state at boot

This patch fixes a bug located by Vegard Nossum with the aid of
kmemcheck, updated based on review comments from Nick Piggin,
Ingo Molnar, and Andrew Morton.  And cleans up the variable-name
and function-name language.  ;-)

The boot CPU runs in the context of its idle thread during boot-up.
During this time, idle_cpu(0) will always return nonzero, which will
fool Classic and Hierarchical RCU into deciding that a large chunk of
the boot-up sequence is a big long quiescent state.  This in turn causes
RCU to prematurely end grace periods during this time.

This patch changes the rcutree.c and rcuclassic.c rcu_check_callbacks()
function to ignore the idle task as a quiescent state until the
system has started up the scheduler in rest_init(), introducing a
new non-API function rcu_idle_now_means_idle() to inform RCU of this
transition.  RCU maintains an internal rcu_idle_cpu_truthful variable
to track this state, which is then used by rcu_check_callback() to
determine if it should believe idle_cpu().

Because this patch has the effect of disallowing RCU grace periods
during long stretches of the boot-up sequence, this patch also introduces
Josh Triplett's UP-only optimization that makes synchronize_rcu() be a
no-op if num_online_cpus() returns 1.  This allows boot-time code that
calls synchronize_rcu() to proceed normally.  Note, however, that RCU
callbacks registered by call_rcu() will likely queue up until later in
the boot sequence.  Although rcuclassic and rcutree can also use this
same optimization after boot completes, rcupreempt must restrict its
use of this optimization to the portion of the boot sequence before the
scheduler starts up, given that an rcupreempt RCU read-side critical
section may be preeempted.

In addition, this patch takes Nick Piggin's suggestion to make the
system_state global variable be __read_mostly.

Changes since v4:

o	Changes the name of the introduced function and variable to
	be less emotional.  ;-)

Changes since v3:

o	WARN_ON(nr_context_switches() > 0) to verify that RCU
	switches out of boot-time mode before the first context
	switch, as suggested by Nick Piggin.

Changes since v2:

o	Created rcu_blocking_is_gp() internal-to-RCU API that
	determines whether a call to synchronize_rcu() is itself
	a grace period.

o	The definition of rcu_blocking_is_gp() for rcuclassic and
	rcutree checks to see if but a single CPU is online.

o	The definition of rcu_blocking_is_gp() for rcupreempt
	checks to see both if but a single CPU is online and if
	the system is still in early boot.

	This allows rcupreempt to again work correctly if running
	on a single CPU after booting is complete.

o	Added check to rcupreempt's synchronize_sched() for there
	being but one online CPU.

Tested all three variants both SMP and !SMP, booted fine, passed a short
rcutorture test on both x86 and Power.

Located-by: Vegard Nossum <vegard.nossum@gmail.com>
Tested-by: Vegard Nossum <vegard.nossum@gmail.com>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

4 files changed, 31 insertions, 0 deletions

diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h
index f3f697df1d7..80044a4f3ab 100644
--- a/include/linux/rcuclassic.h
+++ b/include/linux/rcuclassic.h
@@ -181,4 +181,10 @@ extern long rcu_batches_completed_bh(void);
 #define rcu_enter_nohz()	do { } while (0)
 #define rcu_exit_nohz()		do { } while (0)
 
+/* A context switch is a grace period for rcuclassic. */
+static inline int rcu_blocking_is_gp(void)
+{
+	return num_online_cpus() == 1;
+}
+
 #endif /* __LINUX_RCUCLASSIC_H */
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 921340a7b71..528343e6da5 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -52,6 +52,9 @@ struct rcu_head {
 	void (*func)(struct rcu_head *head);
 };
 
+/* Internal to kernel, but needed by rcupreempt.h. */
+extern int rcu_scheduler_active;
+
 #if defined(CONFIG_CLASSIC_RCU)
 #include <linux/rcuclassic.h>
 #elif defined(CONFIG_TREE_RCU)
@@ -265,6 +268,7 @@ extern void rcu_barrier_sched(void);
 
 /* Internal to kernel */
 extern void rcu_init(void);
+extern void rcu_scheduler_starting(void);
 extern int rcu_needs_cpu(int cpu);
 
 #endif /* __LINUX_RCUPDATE_H */
diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h
index 3e05c09b54a..74304b4538d 100644
--- a/include/linux/rcupreempt.h
+++ b/include/linux/rcupreempt.h
@@ -142,4 +142,19 @@ static inline void rcu_exit_nohz(void)
 #define rcu_exit_nohz()		do { } while (0)
 #endif /* CONFIG_NO_HZ */
 
+/*
+ * A context switch is a grace period for rcupreempt synchronize_rcu()
+ * only during early boot, before the scheduler has been initialized.
+ * So, how the heck do we get a context switch?  Well, if the caller
+ * invokes synchronize_rcu(), they are willing to accept a context
+ * switch, so we simply pretend that one happened.
+ *
+ * After boot, there might be a blocked or preempted task in an RCU
+ * read-side critical section, so we cannot then take the fastpath.
+ */
+static inline int rcu_blocking_is_gp(void)
+{
+	return num_online_cpus() == 1 && !rcu_scheduler_active;
+}
+
 #endif /* __LINUX_RCUPREEMPT_H */
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index d4368b7975c..a722fb67bb2 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -326,4 +326,10 @@ static inline void rcu_exit_nohz(void)
 }
 #endif /* CONFIG_NO_HZ */
 
+/* A context switch is a grace period for rcutree. */
+static inline int rcu_blocking_is_gp(void)
+{
+	return num_online_cpus() == 1;
+}
+
 #endif /* __LINUX_RCUTREE_H */