[ALSA] Implement support for Line-in capture on SB Live 24bit.

CA0106 driver
Notes: MIC capture not tested yet.

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

1 files changed, 57 insertions, 4 deletions

diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h
index c623858428c..67e56a530b2 100644
--- a/sound/pci/ca0106/ca0106.h
+++ b/sound/pci/ca0106/ca0106.h
@@ -1,7 +1,7 @@
 /*
  *  Copyright (c) 2004 James Courtier-Dutton <James@superbug.demon.co.uk>
  *  Driver CA0106 chips. e.g. Sound Blaster Audigy LS and Live 24bit
- *  Version: 0.0.20
+ *  Version: 0.0.21
  *
  *  FEATURES currently supported:
  *    See ca0106_main.c for features.
@@ -45,6 +45,8 @@
  *    Added I2C and SPI registers. Filled in interrupt enable.
  *  0.0.20
  *    Added GPIO info for SB Live 24bit.
+ *  0.0.21
+ *   Implement support for Line-in capture on SB Live 24bit.
  *
  *
  *  This code was initally based on code from ALSA's emu10k1x.c which is:
@@ -475,9 +477,56 @@
 						/* Causes interrupts based on timer intervals. */
 #define SPI			0x7a		/* SPI: Serial Interface Register */
 #define I2C_A			0x7b		/* I2C Address. 32 bit */
-#define I2C_0			0x7c		/* I2C Data Port 0. 32 bit */
-#define I2C_1			0x7d		/* I2C Data Port 1. 32 bit */
-
+#define I2C_D0			0x7c		/* I2C Data Port 0. 32 bit */
+#define I2C_D1			0x7d		/* I2C Data Port 1. 32 bit */
+//I2C values
+#define I2C_A_ADC_ADD_MASK	0x000000fe	//The address is a 7 bit address
+#define I2C_A_ADC_RW_MASK	0x00000001	//bit mask for R/W
+#define I2C_A_ADC_TRANS_MASK	0x00000010  	//Bit mask for I2c address DAC value
+#define I2C_A_ADC_ABORT_MASK	0x00000020	//Bit mask for I2C transaction abort flag
+#define I2C_A_ADC_LAST_MASK	0x00000040	//Bit mask for Last word transaction
+#define I2C_A_ADC_BYTE_MASK	0x00000080	//Bit mask for Byte Mode
+
+#define I2C_A_ADC_ADD		0x00000034	//This is the Device address for ADC 
+#define I2C_A_ADC_READ		0x00000001	//To perform a read operation
+#define I2C_A_ADC_START		0x00000100	//Start I2C transaction
+#define I2C_A_ADC_ABORT		0x00000200	//I2C transaction abort
+#define I2C_A_ADC_LAST		0x00000400	//I2C last transaction
+#define I2C_A_ADC_BYTE		0x00000800	//I2C one byte mode
+
+#define I2C_D_ADC_REG_MASK	0xfe000000  	//ADC address register 
+#define I2C_D_ADC_DAT_MASK	0x01ff0000  	//ADC data register
+
+#define ADC_TIMEOUT		0x00000007	//ADC Timeout Clock Disable
+#define ADC_IFC_CTRL		0x0000000b	//ADC Interface Control
+#define ADC_MASTER		0x0000000c	//ADC Master Mode Control
+#define ADC_POWER		0x0000000d	//ADC PowerDown Control
+#define ADC_ATTEN_ADCL		0x0000000e	//ADC Attenuation ADCL
+#define ADC_ATTEN_ADCR		0x0000000f	//ADC Attenuation ADCR
+#define ADC_ALC_CTRL1		0x00000010	//ADC ALC Control 1
+#define ADC_ALC_CTRL2		0x00000011	//ADC ALC Control 2
+#define ADC_ALC_CTRL3		0x00000012	//ADC ALC Control 3
+#define ADC_NOISE_CTRL		0x00000013	//ADC Noise Gate Control
+#define ADC_LIMIT_CTRL		0x00000014	//ADC Limiter Control
+#define ADC_MUX			0x00000015  	//ADC Mux offset
+
+#if 0
+/* FIXME: Not tested yet. */
+#define ADC_GAIN_MASK		0x000000ff	//Mask for ADC Gain
+#define ADC_ZERODB		0x000000cf	//Value to set ADC to 0dB
+#define ADC_MUTE_MASK		0x000000c0	//Mask for ADC mute
+#define ADC_MUTE		0x000000c0	//Value to mute ADC
+#define ADC_OSR			0x00000008	//Mask for ADC oversample rate select
+#define ADC_TIMEOUT_DISABLE	0x00000008	//Value and mask to disable Timeout clock
+#define ADC_HPF_DISABLE		0x00000100	//Value and mask to disable High pass filter
+#define ADC_TRANWIN_MASK	0x00000070	//Mask for Length of Transient Window
+#endif
+
+#define ADC_MUX_MASK		0x0000000f	//Mask for ADC Mux
+#define ADC_MUX_MIC		0x00000002	//Value to select Mic at ADC Mux
+#define ADC_MUX_LINEIN		0x00000004	//Value to select LineIn at ADC Mux
+#define ADC_MUX_PHONE		0x00000001	//Value to select TAD at ADC Mux (Not used)
+#define ADC_MUX_AUX		0x00000008	//Value to select Aux at ADC Mux
 
 #define SET_CHANNEL 0  /* Testing channel outputs 0=Front, 1=Center/LFE, 2=Unknown, 3=Rear */
 #define PCM_FRONT_CHANNEL 0
@@ -513,6 +562,7 @@ typedef struct {
         char * name;
         int ac97;
 	int gpio_type;
+	int i2c_adc;
 } ca0106_details_t;
 
 // definition of the chip-specific record
@@ -555,3 +605,6 @@ void snd_ca0106_ptr_write(ca0106_t *emu,
 				   unsigned int chn, 
 				   unsigned int data);
 
+int snd_ca0106_i2c_write(ca0106_t *emu, u32 reg, u32 value);
+
+