diff options
| -rw-r--r-- | arch/powerpc/boot/Makefile | 4 | ||||
| -rw-r--r-- | arch/powerpc/boot/cuboot-hotfoot.c | 142 | ||||
| -rw-r--r-- | arch/powerpc/boot/dts/hotfoot.dts | 294 | ||||
| -rw-r--r-- | arch/powerpc/boot/ppcboot-hotfoot.h | 133 | ||||
| -rw-r--r-- | arch/powerpc/platforms/40x/Kconfig | 10 | ||||
| -rw-r--r-- | arch/powerpc/platforms/40x/ppc40x_simple.c | 3 |
6 files changed, 584 insertions, 2 deletions
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 9ae7b7e2ba7..5a109a93753 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -39,6 +39,7 @@ DTS_FLAGS ?= -p 1024 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 +$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 @@ -67,7 +68,7 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \ fsl-soc.c mpc8xx.c pq2.c src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \ - cuboot-ebony.c treeboot-ebony.c prpmc2800.c \ + cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \ cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \ @@ -190,6 +191,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage # Board ports in arch/powerpc/platform/40x/Kconfig image-$(CONFIG_EP405) += dtbImage.ep405 +image-$(CONFIG_HOTFOOT) += cuImage.hotfoot image-$(CONFIG_WALNUT) += treeImage.walnut image-$(CONFIG_ACADIA) += cuImage.acadia diff --git a/arch/powerpc/boot/cuboot-hotfoot.c b/arch/powerpc/boot/cuboot-hotfoot.c new file mode 100644 index 00000000000..8f697b958e4 --- /dev/null +++ b/arch/powerpc/boot/cuboot-hotfoot.c @@ -0,0 +1,142 @@ +/* + * Old U-boot compatibility for Esteem 195E Hotfoot CPU Board + * + * Author: Solomon Peachy <solomon@linux-wlan.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "reg.h" +#include "dcr.h" +#include "4xx.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_HOTFOOT + +#include "ppcboot-hotfoot.h" + +static bd_t bd; + +#define NUM_REGS 3 + +static void hotfoot_fixups(void) +{ + u32 uart = mfdcr(DCRN_CPC0_UCR) & 0x7f; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + + dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_procfreq, 0); + dt_fixup_clock("/plb", bd.bi_plb_busfreq); + dt_fixup_clock("/plb/opb", bd.bi_opbfreq); + dt_fixup_clock("/plb/ebc", bd.bi_pci_busfreq); + dt_fixup_clock("/plb/opb/serial@ef600300", bd.bi_procfreq / uart); + dt_fixup_clock("/plb/opb/serial@ef600400", bd.bi_procfreq / uart); + + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); + + /* Is this a single eth/serial board? */ + if ((bd.bi_enet1addr[0] == 0) && + (bd.bi_enet1addr[1] == 0) && + (bd.bi_enet1addr[2] == 0) && + (bd.bi_enet1addr[3] == 0) && + (bd.bi_enet1addr[4] == 0) && + (bd.bi_enet1addr[5] == 0)) { + void *devp; + + printf("Trimming devtree for single serial/eth board\n"); + + devp = finddevice("/plb/opb/serial@ef600300"); + if (!devp) + fatal("Can't find node for /plb/opb/serial@ef600300"); + del_node(devp); + + devp = finddevice("/plb/opb/ethernet@ef600900"); + if (!devp) + fatal("Can't find node for /plb/opb/ethernet@ef600900"); + del_node(devp); + } + + ibm4xx_quiesce_eth((u32 *)0xef600800, (u32 *)0xef600900); + + /* Fix up flash size in fdt for 4M boards. */ + if (bd.bi_flashsize < 0x800000) { + u32 regs[NUM_REGS]; + void *devp = finddevice("/plb/ebc/nor_flash@0"); + if (!devp) + fatal("Can't find FDT node for nor_flash!??"); + + printf("Fixing devtree for 4M Flash\n"); + + /* First fix up the base addresse */ + getprop(devp, "reg", regs, sizeof(regs)); + regs[0] = 0; + regs[1] = 0xffc00000; + regs[2] = 0x00400000; + setprop(devp, "reg", regs, sizeof(regs)); + + /* Then the offsets */ + devp = finddevice("/plb/ebc/nor_flash@0/partition@0"); + if (!devp) + fatal("Can't find FDT node for partition@0"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@1"); + if (!devp) + fatal("Can't find FDT node for partition@1"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@2"); + if (!devp) + fatal("Can't find FDT node for partition@2"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@3"); + if (!devp) + fatal("Can't find FDT node for partition@3"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@4"); + if (!devp) + fatal("Can't find FDT node for partition@4"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@6"); + if (!devp) + fatal("Can't find FDT node for partition@6"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + /* Delete the FeatFS node */ + devp = finddevice("/plb/ebc/nor_flash@0/partition@5"); + if (!devp) + fatal("Can't find FDT node for partition@5"); + del_node(devp); + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = hotfoot_fixups; + platform_ops.exit = ibm40x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts new file mode 100644 index 00000000000..cad9c3840af --- /dev/null +++ b/arch/powerpc/boot/dts/hotfoot.dts @@ -0,0 +1,294 @@ +/* + * Device Tree Source for ESTeem 195E Hotfoot + * + * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "est,hotfoot"; + compatible = "est,hotfoot"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EP"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <0x20>; + d-cache-line-size = <0x20>; + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + plb { + compatible = "ibm,plb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ep"; + dcr-reg = <0x010 0x002>; + }; + + MAL: mcmal { + compatible = "ibm,mcmal-405ep", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&UIC0>; + interrupts = < + 0xb 0x4 /* TXEOB */ + 0xc 0x4 /* RXEOB */ + 0xa 0x4 /* SERR */ + 0xd 0x4 /* TXDE */ + 0xe 0x4 /* RXDE */>; + }; + + POB0: opb { + compatible = "ibm,opb-405ep", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xef600000 0xef600000 0x00a00000>; + dcr-reg = <0x0a0 0x005>; + clock-frequency = <0>; /* Filled in by zImage */ + + /* Hotfoot has UART0/UART1 swapped */ + + UART0: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <0x9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <0x9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405ep", "ibm,iic"; + reg = <0xef600500 0x00000011>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + + rtc@68 { + /* Actually a DS1339 */ + compatible = "dallas,ds1307"; + reg = <0x68>; + }; + + temp@4a { + /* Not present on all boards */ + compatible = "national,lm75"; + reg = <0x4a>; + }; + }; + + GPIO: gpio@ef600700 { + #gpio-cells = <2>; + compatible = "ibm,ppc4xx-gpio"; + reg = <0xef600700 0x00000020>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "Status"; + gpios = <&GPIO 1 0>; + }; + radiorx { + label = "Rx"; + gpios = <&GPIO 0xe 0>; + }; + }; + + EMAC0: ethernet@ef600800 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-405ep", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + 0xf 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; + local-mac-address = [000000000000]; /* Filled in by zImage */ + reg = <0xef600800 0x00000070>; + mal-device = <&MAL>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + phy-mode = "mii"; + phy-map = <0x00000000>; + }; + + EMAC1: ethernet@ef600900 { + linux,network-index = <0x1>; + device_type = "network"; + compatible = "ibm,emac-405ep", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + 0x11 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; + local-mac-address = [000000000000]; /* Filled in by zImage */ + reg = <0xef600900 0x00000070>; + mal-device = <&MAL>; + mal-tx-channel = <2>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + mdio-device = <&EMAC0>; + phy-mode = "mii"; + phy-map = <0x0000001>; + }; + }; + + EBC0: ebc { + compatible = "ibm,ebc-405ep", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + + /* The ranges property is supplied by the bootwrapper + * and is based on the firmware's configuration of the + * EBC bridge + */ + clock-frequency = <0>; /* Filled in by zImage */ + + nor_flash@0 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0x0 0xff800000 0x00800000>; + #address-cells = <1>; + #size-cells = <1>; + + /* This mapping is for the 8M flash + 4M flash has all ofssets -= 4M, + and FeatFS partition is not present */ + partition@0 { + label = "Bootloader"; + reg = <0x7c0000 0x40000>; + /* read-only; */ + }; + partition@1 { + label = "Env_and_Config_Primary"; + reg = <0x400000 0x10000>; + }; + partition@2 { + label = "Kernel"; + reg = <0x420000 0x100000>; + }; + partition@3 { + label = "Filesystem"; + reg = <0x520000 0x2a0000>; + }; + partition@4 { + label = "Env_and_Config_Secondary"; + reg = <0x410000 0x10000>; + }; + partition@5 { + label = "FeatFS"; + reg = <0x000000 0x400000>; + }; + partition@6 { + label = "Bootloader_Env"; + reg = <0x7d0000 0x10000>; + }; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; + primary; + reg = <0xeec00000 0x00000008 /* Config space access */ + 0xeed80000 0x00000004 /* IACK */ + 0xeed80000 0x00000004 /* Special cycle */ + 0xef480000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; + + interrupt-parent = <&UIC0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */ + 0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8 + 0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8 + + /* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */ + 0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8 + 0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8 + >; + }; + }; + + chosen { + linux,stdout-path = &UART0; + }; +}; diff --git a/arch/powerpc/boot/ppcboot-hotfoot.h b/arch/powerpc/boot/ppcboot-hotfoot.h new file mode 100644 index 00000000000..1a3e80b533d --- /dev/null +++ b/arch/powerpc/boot/ppcboot-hotfoot.h @@ -0,0 +1,133 @@ +/* + * This interface is used for compatibility with old U-boots *ONLY*. + * Please do not imitate or extend this. + */ + +/* + * Unfortunately, the ESTeem Hotfoot board uses a mangled version of + * ppcboot.h for historical reasons, and in the interest of having a + * mainline kernel boot on the production board+bootloader, this was the + * least-offensive solution. Please direct all flames to: + * + * Solomon Peachy <solomon@linux-wlan.com> + * + * (This header is identical to ppcboot.h except for the + * TARGET_HOTFOOT bits) + */ + +/* + * (C) Copyright 2000, 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __PPCBOOT_H__ +#define __PPCBOOT_H__ + +/* + * Board information passed to kernel from PPCBoot + * + * include/asm-ppc/ppcboot.h + */ + +#include "types.h" + +typedef struct bd_info { + unsigned long bi_memstart; /* start of DRAM memory */ + unsigned long bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ + unsigned long bi_sramstart; /* start of SRAM memory */ + unsigned long bi_sramsize; /* size of SRAM memory */ +#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\ + defined(TARGET_83xx) + unsigned long bi_immr_base; /* base of IMMR register */ +#endif +#if defined(TARGET_PPC_MPC52xx) + unsigned long bi_mbar_base; /* base of internal registers */ +#endif + unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* Ethernet address */ +#if defined(TARGET_HOTFOOT) + /* second onboard ethernet port */ + unsigned char bi_enet1addr[6]; +#define HAVE_ENET1ADDR +#endif /* TARGET_HOOTFOOT */ + unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ + unsigned long bi_intfreq; /* Internal Freq, in MHz */ + unsigned long bi_busfreq; /* Bus Freq, in MHz */ +#if defined(TARGET_CPM2) + unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ + unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ + unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ + unsigned long bi_vco; /* VCO Out from PLL, in MHz */ +#endif +#if defined(TARGET_PPC_MPC52xx) + unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ + unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ +#endif + unsigned long bi_baudrate; /* Console Baudrate */ +#if defined(TARGET_4xx) + unsigned char bi_s_version[4]; /* Version of this structure */ + unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */ + unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */ + unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ + unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ +#endif +#if defined(TARGET_HOTFOOT) + unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ +#endif +#if defined(TARGET_HYMOD) + hymod_conf_t bi_hymod_conf; /* hymod configuration information */ +#endif +#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \ + defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) + /* second onboard ethernet port */ + unsigned char bi_enet1addr[6]; +#define HAVE_ENET1ADDR +#endif +#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \ + defined(TARGET_85xx) || defined(TARGET_HAS_ETH2) + /* third onboard ethernet ports */ + unsigned char bi_enet2addr[6]; +#define HAVE_ENET2ADDR +#endif +#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3) + /* fourth onboard ethernet ports */ + unsigned char bi_enet3addr[6]; +#define HAVE_ENET3ADDR +#endif +#if defined(TARGET_HOTFOOT) + int bi_phynum[2]; /* Determines phy mapping */ + int bi_phymode[2]; /* Determines phy mode */ +#endif +#if defined(TARGET_4xx) + unsigned int bi_opbfreq; /* OB clock in Hz */ + int bi_iic_fast[2]; /* Use fast i2c mode */ +#endif +#if defined(TARGET_440GX) + int bi_phynum[4]; /* phy mapping */ + int bi_phymode[4]; /* phy mode */ +#endif +} bd_t; + +#define bi_tbfreq bi_intfreq + +#endif /* __PPCBOOT_H__ */ diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index a6e43cb6f82..ec64264f7a5 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -40,6 +40,16 @@ config HCU4 help This option enables support for the Nestal Maschinen HCU4 board. +config HOTFOOT + bool "Hotfoot" + depends on 40x + default n + select 405EP + select PPC40x_SIMPLE + select PCI + help + This option enables support for the ESTEEM 195E Hotfoot board. + config KILAUEA bool "Kilauea" depends on 40x diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c index 5fd5a597400..546bbc229d1 100644 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c @@ -54,7 +54,8 @@ static char *board[] __initdata = { "amcc,acadia", "amcc,haleakala", "amcc,kilauea", - "amcc,makalu" + "amcc,makalu", + "est,hotfoot" }; static int __init ppc40x_probe(void) |