aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/sparc/include/asm/dma.h141
-rw-r--r--arch/sparc/include/asm/dma_32.h288
-rw-r--r--arch/sparc/include/asm/dma_64.h205
-rw-r--r--arch/sparc/include/asm/floppy_32.h11
-rw-r--r--arch/sparc/kernel/sparc_ksyms.c1
-rw-r--r--arch/sparc64/kernel/sparc64_ksyms.c1
-rw-r--r--drivers/net/sunlance.c51
-rw-r--r--drivers/sbus/Makefile2
-rw-r--r--drivers/sbus/dvma.c136
-rw-r--r--drivers/sbus/sbus.c2
-rw-r--r--drivers/scsi/esp_scsi.h3
-rw-r--r--drivers/scsi/sun_esp.c122
12 files changed, 246 insertions, 717 deletions
diff --git a/arch/sparc/include/asm/dma.h b/arch/sparc/include/asm/dma.h
index aa1d90ac04c..49356344679 100644
--- a/arch/sparc/include/asm/dma.h
+++ b/arch/sparc/include/asm/dma.h
@@ -1,8 +1,139 @@
-#ifndef ___ASM_SPARC_DMA_H
-#define ___ASM_SPARC_DMA_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/dma_64.h>
+#ifndef _ASM_SPARC_DMA_H
+#define _ASM_SPARC_DMA_H
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ 1
+#define DMA_MODE_WRITE 2
+#define MAX_DMA_ADDRESS (~0UL)
+
+/* Useful constants */
+#define SIZE_16MB (16*1024*1024)
+#define SIZE_64K (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */
+#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */
+#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */
+#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
+#define DMA_VERS0 0x00000000 /* Sunray DMA version */
+#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
+#define DMA_VERS1 0x80000000 /* DMA rev 1 */
+#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
+#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
+#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
+#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
+#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
+#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
+#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
+#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
+#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
+#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
+#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64 0x000c0000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */
+#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */
+#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
+#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
+#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
+#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1 0x01
+#define DMA_BURST2 0x02
+#define DMA_BURST4 0x04
+#define DMA_BURST8 0x08
+#define DMA_BURST16 0x10
+#define DMA_BURST32 0x20
+#define DMA_BURST64 0x40
+#define DMA_BURSTBITS 0x7f
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
#else
-#include <asm/dma_32.h>
+#define isa_dma_bridge_buggy (0)
#endif
+
+#ifdef CONFIG_SPARC32
+
+#include <asm/sbus.h>
+
+/* Routines for data transfer buffers. */
+BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
+BTFIXUPDEF_CALL(void, mmu_unlockarea, char *, unsigned long)
+
+#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
+#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
+
+/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
+BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void, mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void, mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void, mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+
+#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
+#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
+#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
+#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
+
+/*
+ * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
+ *
+ * The mmu_map_dma_area establishes two mappings in one go.
+ * These mappings point to pages normally mapped at 'va' (linear address).
+ * First mapping is for CPU visible address at 'a', uncached.
+ * This is an alias, but it works because it is an uncached mapping.
+ * Second mapping is for device visible address, or "bus" address.
+ * The bus address is returned at '*pba'.
+ *
+ * These functions seem distinct, but are hard to split. On sun4c,
+ * at least for now, 'a' is equal to bus address, and retured in *pba.
+ * On sun4m, page attributes depend on the CPU type, so we have to
+ * know if we are mapping RAM or I/O, so it has to be an additional argument
+ * to a separate mapping function for CPU visible mappings.
+ */
+BTFIXUPDEF_CALL(int, mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
+BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
+BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, unsigned long busa, int len)
+
+#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
+#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
+#define mmu_translate_dvma(ba) BTFIXUP_CALL(mmu_translate_dvma)(ba)
#endif
+
+#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/arch/sparc/include/asm/dma_32.h b/arch/sparc/include/asm/dma_32.h
deleted file mode 100644
index cf7189c0079..00000000000
--- a/arch/sparc/include/asm/dma_32.h
+++ /dev/null
@@ -1,288 +0,0 @@
-/* include/asm/dma.h
- *
- * Copyright 1995 (C) David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _ASM_SPARC_DMA_H
-#define _ASM_SPARC_DMA_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <asm/vac-ops.h> /* for invalidate's, etc. */
-#include <asm/sbus.h>
-#include <asm/delay.h>
-#include <asm/oplib.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <linux/spinlock.h>
-
-struct page;
-extern spinlock_t dma_spin_lock;
-
-static inline unsigned long claim_dma_lock(void)
-{
- unsigned long flags;
- spin_lock_irqsave(&dma_spin_lock, flags);
- return flags;
-}
-
-static inline void release_dma_lock(unsigned long flags)
-{
- spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* These are irrelevant for Sparc DMA, but we leave it in so that
- * things can compile.
- */
-#define MAX_DMA_CHANNELS 8
-#define MAX_DMA_ADDRESS (~0UL)
-#define DMA_MODE_READ 1
-#define DMA_MODE_WRITE 2
-
-/* Useful constants */
-#define SIZE_16MB (16*1024*1024)
-#define SIZE_64K (64*1024)
-
-/* SBUS DMA controller reg offsets */
-#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */
-#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */
-#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */
-#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */
-
-/* DVMA chip revisions */
-enum dvma_rev {
- dvmarev0,
- dvmaesc1,
- dvmarev1,
- dvmarev2,
- dvmarev3,
- dvmarevplus,
- dvmahme
-};
-
-#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)
-
-/* Linux DMA information structure, filled during probe. */
-struct sbus_dma {
- struct sbus_dma *next;
- struct sbus_dev *sdev;
- void __iomem *regs;
-
- /* Status, misc info */
- int node; /* Prom node for this DMA device */
- int running; /* Are we doing DMA now? */
- int allocated; /* Are we "owned" by anyone yet? */
-
- /* Transfer information. */
- unsigned long addr; /* Start address of current transfer */
- int nbytes; /* Size of current transfer */
- int realbytes; /* For splitting up large transfers, etc. */
-
- /* DMA revision */
- enum dvma_rev revision;
-};
-
-extern struct sbus_dma *dma_chain;
-
-/* Broken hardware... */
-#ifdef CONFIG_SUN4
-/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
- * Or is rev0 present only on sun4 boxes? -jj */
-#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
-#else
-#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1)
-#endif
-#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)
-
-/* Main routines in dma.c */
-extern void dvma_init(struct sbus_bus *);
-
-/* Fields in the cond_reg register */
-/* First, the version identification bits */
-#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
-#define DMA_VERS0 0x00000000 /* Sunray DMA version */
-#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
-#define DMA_VERS1 0x80000000 /* DMA rev 1 */
-#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
-#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
-#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
-
-#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
-#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
-#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
-#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
-#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
-#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
-#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
-#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
-#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
-#define DMA_RST_BPP DMA_RST_SCSI /* Reset the BPP controller */
-#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
-#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
-#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
-#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
-#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
-#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
-#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
-#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
-#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */
-#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
-#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
-#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
-#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
-#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */
-#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */
-#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */
-#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
-#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
-#define DMA_BRST32 0x00040000 /* SCSI/BPP: 32byte bursts */
-#define DMA_BRST16 0x00000000 /* SCSI/BPP: 16byte bursts */
-#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
-#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
-#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
-#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
-#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
-#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
-#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
-#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
-#define DMA_BPP_ON DMA_SCSI_ON /* Enable BPP dma */
-#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
-#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
-#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
-#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */
-
-/* Values describing the burst-size property from the PROM */
-#define DMA_BURST1 0x01
-#define DMA_BURST2 0x02
-#define DMA_BURST4 0x04
-#define DMA_BURST8 0x08
-#define DMA_BURST16 0x10
-#define DMA_BURST32 0x20
-#define DMA_BURST64 0x40
-#define DMA_BURSTBITS 0x7f
-
-/* Determine highest possible final transfer address given a base */
-#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
-
-/* Yes, I hack a lot of elisp in my spare time... */
-#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR))
-#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
-#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE))
-#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE)))
-#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
-#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
-#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
-#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr))
-#define DMA_BEGINDMA_W(regs) \
- ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
-#define DMA_BEGINDMA_R(regs) \
- ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
-
-/* For certain DMA chips, we need to disable ints upon irq entry
- * and turn them back on when we are done. So in any ESP interrupt
- * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
- * when leaving the handler. You have been warned...
- */
-#define DMA_IRQ_ENTRY(dma, dregs) do { \
- if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
- } while (0)
-
-#define DMA_IRQ_EXIT(dma, dregs) do { \
- if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
- } while(0)
-
-#if 0 /* P3 this stuff is inline in ledma.c:init_restart_ledma() */
-/* Pause until counter runs out or BIT isn't set in the DMA condition
- * register.
- */
-static inline void sparc_dma_pause(struct sparc_dma_registers *regs,
- unsigned long bit)
-{
- int ctr = 50000; /* Let's find some bugs ;) */
-
- /* Busy wait until the bit is not set any more */
- while((regs->cond_reg&bit) && (ctr>0)) {
- ctr--;
- __delay(5);
- }
-
- /* Check for bogus outcome. */
- if(!ctr)
- panic("DMA timeout");
-}
-
-/* Reset the friggin' thing... */
-#define DMA_RESET(dma) do { \
- struct sparc_dma_registers *regs = dma->regs; \
- /* Let the current FIFO drain itself */ \
- sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \
- /* Reset the logic */ \
- regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \
- __delay(400); /* let the bits set ;) */ \
- regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \
- sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \
- /* Enable FAST transfers if available */ \
- if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \
- dma->running = 0; \
-} while(0)
-#endif
-
-#define for_each_dvma(dma) \
- for((dma) = dma_chain; (dma); (dma) = (dma)->next)
-
-extern int get_dma_list(char *);
-extern int request_dma(unsigned int, __const__ char *);
-extern void free_dma(unsigned int);
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
-/* Routines for data transfer buffers. */
-BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
-BTFIXUPDEF_CALL(void, mmu_unlockarea, char *, unsigned long)
-
-#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
-#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
-
-/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
-BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void, mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void, mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void, mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
-
-#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
-#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
-#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
-#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
-
-/*
- * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
- *
- * The mmu_map_dma_area establishes two mappings in one go.
- * These mappings point to pages normally mapped at 'va' (linear address).
- * First mapping is for CPU visible address at 'a', uncached.
- * This is an alias, but it works because it is an uncached mapping.
- * Second mapping is for device visible address, or "bus" address.
- * The bus address is returned at '*pba'.
- *
- * These functions seem distinct, but are hard to split. On sun4c,
- * at least for now, 'a' is equal to bus address, and retured in *pba.
- * On sun4m, page attributes depend on the CPU type, so we have to
- * know if we are mapping RAM or I/O, so it has to be an additional argument
- * to a separate mapping function for CPU visible mappings.
- */
-BTFIXUPDEF_CALL(int, mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
-BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
-BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, unsigned long busa, int len)
-
-#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
-#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
-#define mmu_translate_dvma(ba) BTFIXUP_CALL(mmu_translate_dvma)(ba)
-
-#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/arch/sparc/include/asm/dma_64.h b/arch/sparc/include/asm/dma_64.h
deleted file mode 100644
index 46a8aecffc0..00000000000
--- a/arch/sparc/include/asm/dma_64.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * include/asm/dma.h
- *
- * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _ASM_SPARC64_DMA_H
-#define _ASM_SPARC64_DMA_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-
-#include <asm/sbus.h>
-#include <asm/delay.h>
-#include <asm/oplib.h>
-
-/* These are irrelevant for Sparc DMA, but we leave it in so that
- * things can compile.
- */
-#define MAX_DMA_CHANNELS 8
-#define DMA_MODE_READ 1
-#define DMA_MODE_WRITE 2
-#define MAX_DMA_ADDRESS (~0UL)
-
-/* Useful constants */
-#define SIZE_16MB (16*1024*1024)
-#define SIZE_64K (64*1024)
-
-/* SBUS DMA controller reg offsets */
-#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */
-#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */
-#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */
-#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */
-
-/* DVMA chip revisions */
-enum dvma_rev {
- dvmarev0,
- dvmaesc1,
- dvmarev1,
- dvmarev2,
- dvmarev3,
- dvmarevplus,
- dvmahme
-};
-
-#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)
-
-/* Linux DMA information structure, filled during probe. */
-struct sbus_dma {
- struct sbus_dma *next;
- struct sbus_dev *sdev;
- void __iomem *regs;
-
- /* Status, misc info */
- int node; /* Prom node for this DMA device */
- int running; /* Are we doing DMA now? */
- int allocated; /* Are we "owned" by anyone yet? */
-
- /* Transfer information. */
- u32 addr; /* Start address of current transfer */
- int nbytes; /* Size of current transfer */
- int realbytes; /* For splitting up large transfers, etc. */
-
- /* DMA revision */
- enum dvma_rev revision;
-};
-
-extern struct sbus_dma *dma_chain;
-
-/* Broken hardware... */
-#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1)
-#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)
-
-/* Main routines in dma.c */
-extern void dvma_init(struct sbus_bus *);
-
-/* Fields in the cond_reg register */
-/* First, the version identification bits */
-#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
-#define DMA_VERS0 0x00000000 /* Sunray DMA version */
-#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
-#define DMA_VERS1 0x80000000 /* DMA rev 1 */
-#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
-#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
-#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
-
-#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
-#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
-#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
-#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
-#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
-#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
-#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
-#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
-#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
-#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
-#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
-#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
-#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
-#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
-#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
-#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
-#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
-#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */
-#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
-#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
-#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
-#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
-#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */
-#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */
-#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */
-#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
-#define DMA_BRST64 0x000c0000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
-#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */
-#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */
-#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
-#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
-#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
-#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
-#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
-#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
-#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
-#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
-#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
-#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
-#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
-#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */
-
-/* Values describing the burst-size property from the PROM */
-#define DMA_BURST1 0x01
-#define DMA_BURST2 0x02
-#define DMA_BURST4 0x04
-#define DMA_BURST8 0x08
-#define DMA_BURST16 0x10
-#define DMA_BURST32 0x20
-#define DMA_BURST64 0x40
-#define DMA_BURSTBITS 0x7f
-
-/* Determine highest possible final transfer address given a base */
-#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
-
-/* Yes, I hack a lot of elisp in my spare time... */
-#define DMA_ERROR_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
-#define DMA_IRQ_P(regs) ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
-#define DMA_WRITE_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
-#define DMA_OFF(__regs) \
-do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
- tmp &= ~DMA_ENABLE; \
- sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_INTSOFF(__regs) \
-do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
- tmp &= ~DMA_INT_ENAB; \
- sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_INTSON(__regs) \
-do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
- tmp |= DMA_INT_ENAB; \
- sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_PUNTFIFO(__regs) \
-do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
- tmp |= DMA_FIFO_INV; \
- sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_SETSTART(__regs, __addr) \
- sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
-#define DMA_BEGINDMA_W(__regs) \
-do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
- tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
- sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_BEGINDMA_R(__regs) \
-do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
- tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
- tmp &= ~DMA_ST_WRITE; \
- sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-
-/* For certain DMA chips, we need to disable ints upon irq entry
- * and turn them back on when we are done. So in any ESP interrupt
- * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
- * when leaving the handler. You have been warned...
- */
-#define DMA_IRQ_ENTRY(dma, dregs) do { \
- if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
- } while (0)
-
-#define DMA_IRQ_EXIT(dma, dregs) do { \
- if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
- } while(0)
-
-#define for_each_dvma(dma) \
- for((dma) = dma_chain; (dma); (dma) = (dma)->next)
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
-#endif /* !(_ASM_SPARC64_DMA_H) */
diff --git a/arch/sparc/include/asm/floppy_32.h b/arch/sparc/include/asm/floppy_32.h
index ae3f00bf22f..ff2b91c6eef 100644
--- a/arch/sparc/include/asm/floppy_32.h
+++ b/arch/sparc/include/asm/floppy_32.h
@@ -385,4 +385,15 @@ static int sparc_eject(void)
#define EXTRA_FLOPPY_PARAMS
+static DEFINE_SPINLOCK(dma_spin_lock);
+
+#define claim_dma_lock() \
+({ unsigned long flags; \
+ spin_lock_irqsave(&dma_spin_lock, flags); \
+ flags; \
+})
+
+#define release_dma_lock(__flags) \
+ spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
#endif /* !(__ASM_SPARC_FLOPPY_H) */
diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c
index b23cea5ca5d..8a392d3d89e 100644
--- a/arch/sparc/kernel/sparc_ksyms.c
+++ b/arch/sparc/kernel/sparc_ksyms.c
@@ -154,7 +154,6 @@ EXPORT_SYMBOL(BTFIXUP_CALL(pgprot_noncached));
#ifdef CONFIG_SBUS
EXPORT_SYMBOL(sbus_root);
-EXPORT_SYMBOL(dma_chain);
EXPORT_SYMBOL(sbus_set_sbus64);
EXPORT_SYMBOL(sbus_alloc_consistent);
EXPORT_SYMBOL(sbus_free_consistent);
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 3b2890c207f..8e6ac5c1b7b 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -161,7 +161,6 @@ EXPORT_SYMBOL(auxio_set_lte);
#endif
#ifdef CONFIG_SBUS
EXPORT_SYMBOL(sbus_root);
-EXPORT_SYMBOL(dma_chain);
EXPORT_SYMBOL(sbus_set_sbus64);
EXPORT_SYMBOL(sbus_alloc_consistent);
EXPORT_SYMBOL(sbus_free_consistent);
diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c
index 4e994f87469..24ffecb1ce2 100644
--- a/drivers/net/sunlance.c
+++ b/drivers/net/sunlance.c
@@ -248,7 +248,7 @@ struct lance_private {
int rx_new, tx_new;
int rx_old, tx_old;
- struct sbus_dma *ledma; /* If set this points to ledma */
+ struct of_device *ledma; /* If set this points to ledma */
char tpe; /* cable-selection is TPE */
char auto_select; /* cable-selection by carrier */
char burst_sizes; /* ledma SBus burst sizes */
@@ -1273,6 +1273,12 @@ static void lance_free_hwresources(struct lance_private *lp)
{
if (lp->lregs)
sbus_iounmap(lp->lregs, LANCE_REG_SIZE);
+ if (lp->dregs) {
+ struct of_device *ledma = lp->ledma;
+
+ of_iounmap(&ledma->resource[0], lp->dregs,
+ resource_size(&ledma->resource[0]));
+ }
if (lp->init_block_iomem) {
sbus_iounmap(lp->init_block_iomem,
sizeof(struct lance_init_block));
@@ -1309,7 +1315,7 @@ static const struct ethtool_ops sparc_lance_ethtool_ops = {
};
static int __devinit sparc_lance_probe_one(struct sbus_dev *sdev,
- struct sbus_dma *ledma,
+ struct of_device *ledma,
struct sbus_dev *lebuffer)
{
static unsigned version_printed;
@@ -1345,6 +1351,18 @@ static int __devinit sparc_lance_probe_one(struct sbus_dev *sdev,
goto fail;
}
+ lp->ledma = ledma;
+ if (lp->ledma) {
+ lp->dregs = of_ioremap(&ledma->resource[0], 0,
+ resource_size(&ledma->resource[0]),
+ "ledma");
+ if (!lp->dregs) {
+ printk(KERN_ERR "SunLance: Cannot map "
+ "ledma registers.\n");
+ goto fail;
+ }
+ }
+
lp->sdev = sdev;
if (lebuffer) {
/* sanity check */
@@ -1383,11 +1401,10 @@ static int __devinit sparc_lance_probe_one(struct sbus_dev *sdev,
LE_C3_BCON));
lp->name = lancestr;
- lp->ledma = ledma;
lp->burst_sizes = 0;
if (lp->ledma) {
- struct device_node *ledma_dp = ledma->sdev->ofdev.node;
+ struct device_node *ledma_dp = ledma->node;
const char *prop;
unsigned int sbmask;
u32 csr;
@@ -1435,8 +1452,6 @@ no_link_test:
lp->tpe = 1;
}
- lp->dregs = ledma->regs;
-
/* Reset ledma */
csr = sbus_readl(lp->dregs + DMA_CSR);
sbus_writel(csr | DMA_RST_ENET, lp->dregs + DMA_CSR);
@@ -1486,18 +1501,6 @@ fail:
return -ENODEV;
}
-/* On 4m, find the associated dma for the lance chip */
-static struct sbus_dma * __devinit find_ledma(struct sbus_dev *sdev)
-{
- struct sbus_dma *p;
-
- for_each_dvma(p) {
- if (p->sdev == sdev)
- return p;
- }
- return NULL;
-}
-
#ifdef CONFIG_SUN4
#include <asm/sun4paddr.h>
@@ -1541,13 +1544,13 @@ static int __devinit sunlance_sbus_probe(struct of_device *dev, const struct of_
int err;
if (sdev->parent) {
- struct of_device *parent = &sdev->parent->ofdev;
-
- if (!strcmp(parent->node->name, "ledma")) {
- struct sbus_dma *ledma = find_ledma(to_sbus_device(&parent->dev));
+ struct device_node *parent_node = sdev->parent->ofdev.node;
+ struct of_device *parent;
- err = sparc_lance_probe_one(sdev, ledma, NULL);
- } else if (!strcmp(parent->node->name, "lebuffer")) {
+ parent = of_find_device_by_node(parent_node);
+ if (parent && !strcmp(parent->node->name, "ledma")) {
+ err = sparc_lance_probe_one(sdev, parent, NULL);
+ } else if (parent && !strcmp(parent->node->name, "lebuffer")) {
err = sparc_lance_probe_one(sdev, NULL, to_sbus_device(&parent->dev));
} else
err = sparc_lance_probe_one(sdev, NULL, NULL);
diff --git a/drivers/sbus/Makefile b/drivers/sbus/Makefile
index 7b1d24d9530..56f73318eba 100644
--- a/drivers/sbus/Makefile
+++ b/drivers/sbus/Makefile
@@ -3,7 +3,7 @@
#
ifneq ($(ARCH),m68k)
-obj-y := sbus.o dvma.o
+obj-y := sbus.o
endif
obj-$(CONFIG_SBUSCHAR) += char/
diff --git a/drivers/sbus/dvma.c b/drivers/sbus/dvma.c
deleted file mode 100644
index ab0d2de3324..00000000000
--- a/drivers/sbus/dvma.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* dvma.c: Routines that are used to access DMA on the Sparc SBus.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/oplib.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/sbus.h>
-
-struct sbus_dma *dma_chain;
-
-static void __init init_one_dvma(struct sbus_dma *dma, int num_dma)
-{
- printk("dma%d: ", num_dma);
-
- dma->next = NULL;
- dma->running = 0; /* No transfers going on as of yet */
- dma->allocated = 0; /* No one has allocated us yet */
- switch(sbus_readl(dma->regs + DMA_CSR)&DMA_DEVICE_ID) {
- case DMA_VERS0:
- dma->revision = dvmarev0;
- printk("Revision 0 ");
- break;
- case DMA_ESCV1:
- dma->revision = dvmaesc1;
- printk("ESC Revision 1 ");
- break;
- case DMA_VERS1:
- dma->revision = dvmarev1;
- printk("Revision 1 ");
- break;
- case DMA_VERS2:
- dma->revision = dvmarev2;
- printk("Revision 2 ");
- break;
- case DMA_VERHME:
- dma->revision = dvmahme;
- printk("HME DVMA gate array ");
- break;
- case DMA_VERSPLUS:
- dma->revision = dvmarevplus;
- printk("Revision 1 PLUS ");
- break;
- default:
- printk("unknown dma version %08x",
- sbus_readl(dma->regs + DMA_CSR) & DMA_DEVICE_ID);
- dma->allocated = 1;
- break;
- }
- printk("\n");
-}
-
-/* Probe this SBus DMA module(s) */
-void __init dvma_init(struct sbus_bus *sbus)
-{
- struct sbus_dev *this_dev;
- struct sbus_dma *dma;
- struct sbus_dma *dchain;
- static int num_dma = 0;
-
- for_each_sbusdev(this_dev, sbus) {
- char *name = this_dev->prom_name;
- int hme = 0;
-
- if(!strcmp(name, "SUNW,fas"))
- hme = 1;
- else if(strcmp(name, "dma") &&
- strcmp(name, "ledma") &&
- strcmp(name, "espdma"))
- continue;
-
- /* Found one... */
- dma = kmalloc(sizeof(struct sbus_dma), GFP_ATOMIC);
-
- dma->sdev = this_dev;
-
- /* Put at end of dma chain */
- dchain = dma_chain;
- if(dchain) {
- while(dchain->next)
- dchain = dchain->next;
- dchain->next = dma;
- } else {
- /* We're the first in line */
- dma_chain = dma;
- }
-
- dma->regs = sbus_ioremap(&dma->sdev->resource[0], 0,
- dma->sdev->resource[0].end - dma->sdev->resource[0].start + 1,
- "dma");
-
- dma->node = dma->sdev->prom_node;
-
- init_one_dvma(dma, num_dma++);
- }
-}
-
-#ifdef CONFIG_SUN4
-
-#include <asm/sun4paddr.h>
-
-void __init sun4_dvma_init(void)
-{
- struct sbus_dma *dma;
- struct resource r;
-
- if(sun4_dma_physaddr) {
- dma = kmalloc(sizeof(struct sbus_dma), GFP_ATOMIC);
-
- /* No SBUS */
- dma->sdev = NULL;
-
- /* Only one DMA device */
- dma_chain = dma;
-
- memset(&r, 0, sizeof(r));
- r.start = sun4_dma_physaddr;
- dma->regs = sbus_ioremap(&r, 0, PAGE_SIZE, "dma");
-
- /* No prom node */
- dma->node = 0x0;
-
- init_one_dvma(dma, 0);
- } else {
- dma_chain = NULL;
- }
-}
-
-#endif
diff --git a/drivers/sbus/sbus.c b/drivers/sbus/sbus.c
index 53e5e7bf545..69491625d86 100644
--- a/drivers/sbus/sbus.c
+++ b/drivers/sbus/sbus.c
@@ -285,8 +285,6 @@ static void __init build_one_sbus(struct device_node *dp, int num_sbus)
}
sbus_fixup_all_regs(sbus->devices);
-
- dvma_init(sbus);
}
static int __init sbus_init(void)
diff --git a/drivers/scsi/esp_scsi.h b/drivers/scsi/esp_scsi.h
index bb43a138818..28e22acf87e 100644
--- a/drivers/scsi/esp_scsi.h
+++ b/drivers/scsi/esp_scsi.h
@@ -521,7 +521,8 @@ struct esp {
struct completion *eh_reset;
- struct sbus_dma *dma;
+ void *dma;
+ int dmarev;
};
/* A front-end driver for the ESP chip should do the following in
diff --git a/drivers/scsi/sun_esp.c b/drivers/scsi/sun_esp.c
index f9cf7015136..d110b94f111 100644
--- a/drivers/scsi/sun_esp.c
+++ b/drivers/scsi/sun_esp.c
@@ -1,6 +1,6 @@
/* sun_esp.c: ESP front-end for Sparc SBUS systems.
*
- * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 2007, 2008 David S. Miller (davem@davemloft.net)
*/
#include <linux/kernel.h>
@@ -30,39 +30,48 @@
#define dma_write32(VAL, REG) \
sbus_writel((VAL), esp->dma_regs + (REG))
-static int __devinit esp_sbus_find_dma(struct esp *esp, struct sbus_dev *dma_sdev)
-{
- struct sbus_dev *sdev = esp->dev;
- struct sbus_dma *dma;
+/* DVMA chip revisions */
+enum dvma_rev {
+ dvmarev0,
+ dvmaesc1,
+ dvmarev1,
+ dvmarev2,
+ dvmarev3,
+ dvmarevplus,
+ dvmahme
+};
- if (dma_sdev != NULL) {
- for_each_dvma(dma) {
- if (dma->sdev == dma_sdev)
- break;
- }
- } else {
- for_each_dvma(dma) {
- if (dma->sdev == NULL)
- break;
+static int __devinit esp_sbus_setup_dma(struct esp *esp,
+ struct of_device *dma_of)
+{
+ esp->dma = dma_of;
- /* If bus + slot are the same and it has the
- * correct OBP name, it's ours.
- */
- if (sdev->bus == dma->sdev->bus &&
- sdev->slot == dma->sdev->slot &&
- (!strcmp(dma->sdev->prom_name, "dma") ||
- !strcmp(dma->sdev->prom_name, "espdma")))
- break;
- }
- }
+ esp->dma_regs = of_ioremap(&dma_of->resource[0], 0,
+ resource_size(&dma_of->resource[0]),
+ "espdma");
+ if (!esp->dma_regs)
+ return -ENOMEM;
- if (dma == NULL) {
- printk(KERN_ERR PFX "[%s] Cannot find dma.\n",
- sdev->ofdev.node->full_name);
- return -ENODEV;
+ switch (dma_read32(DMA_CSR) & DMA_DEVICE_ID) {
+ case DMA_VERS0:
+ esp->dmarev = dvmarev0;
+ break;
+ case DMA_ESCV1:
+ esp->dmarev = dvmaesc1;
+ break;
+ case DMA_VERS1:
+ esp->dmarev = dvmarev1;
+ break;
+ case DMA_VERS2:
+ esp->dmarev = dvmarev2;
+ break;
+ case DMA_VERHME:
+ esp->dmarev = dvmahme;
+ break;
+ case DMA_VERSPLUS:
+ esp->dmarev = dvmarevplus;
+ break;
}
- esp->dma = dma;
- esp->dma_regs = dma->regs;
return 0;
@@ -165,19 +174,18 @@ static void __devinit esp_get_clock_params(struct esp *esp)
esp->cfreq = fmhz;
}
-static void __devinit esp_get_bursts(struct esp *esp, struct sbus_dev *dma)
+static void __devinit esp_get_bursts(struct esp *esp, struct of_device *dma_of)
{
+ struct device_node *dma_dp = dma_of->node;
struct sbus_dev *sdev = esp->dev;
- struct device_node *dp = sdev->ofdev.node;
- u8 bursts;
+ struct device_node *dp;
+ u8 bursts, val;
+ dp = sdev->ofdev.node;
bursts = of_getintprop_default(dp, "burst-sizes", 0xff);
- if (dma) {
- struct device_node *dma_dp = dma->ofdev.node;
- u8 val = of_getintprop_default(dma_dp, "burst-sizes", 0xff);
- if (val != 0xff)
- bursts &= val;
- }
+ val = of_getintprop_default(dma_dp, "burst-sizes", 0xff);
+ if (val != 0xff)
+ bursts &= val;
if (sdev->bus) {
u8 val = of_getintprop_default(sdev->bus->ofdev.node,
@@ -194,7 +202,7 @@ static void __devinit esp_get_bursts(struct esp *esp, struct sbus_dev *dma)
esp->bursts = bursts;
}
-static void __devinit esp_sbus_get_props(struct esp *esp, struct sbus_dev *espdma)
+static void __devinit esp_sbus_get_props(struct esp *esp, struct of_device *espdma)
{
esp_get_scsi_id(esp);
esp_get_differential(esp);
@@ -259,12 +267,12 @@ static void sbus_esp_reset_dma(struct esp *esp)
can_do_burst64 = (esp->bursts & DMA_BURST64) != 0;
/* Put the DVMA into a known state. */
- if (esp->dma->revision != dvmahme) {
+ if (esp->dmarev != dvmahme) {
val = dma_read32(DMA_CSR);
dma_write32(val | DMA_RST_SCSI, DMA_CSR);
dma_write32(val & ~DMA_RST_SCSI, DMA_CSR);
}
- switch (esp->dma->revision) {
+ switch (esp->dmarev) {
case dvmahme:
dma_write32(DMA_RESET_FAS366, DMA_CSR);
dma_write32(DMA_RST_SCSI, DMA_CSR);
@@ -346,14 +354,14 @@ static void sbus_esp_dma_drain(struct esp *esp)
u32 csr;
int lim;
- if (esp->dma->revision == dvmahme)
+ if (esp->dmarev == dvmahme)
return;
csr = dma_read32(DMA_CSR);
if (!(csr & DMA_FIFO_ISDRAIN))
return;
- if (esp->dma->revision != dvmarev3 && esp->dma->revision != dvmaesc1)
+ if (esp->dmarev != dvmarev3 && esp->dmarev != dvmaesc1)
dma_write32(csr | DMA_FIFO_STDRAIN, DMA_CSR);
lim = 1000;
@@ -369,7 +377,7 @@ static void sbus_esp_dma_drain(struct esp *esp)
static void sbus_esp_dma_invalidate(struct esp *esp)
{
- if (esp->dma->revision == dvmahme) {
+ if (esp->dmarev == dvmahme) {
dma_write32(DMA_RST_SCSI, DMA_CSR);
esp->prev_hme_dmacsr = ((esp->prev_hme_dmacsr |
@@ -440,7 +448,7 @@ static void sbus_esp_send_dma_cmd(struct esp *esp, u32 addr, u32 esp_count,
else
csr &= ~DMA_ST_WRITE;
dma_write32(csr, DMA_CSR);
- if (esp->dma->revision == dvmaesc1) {
+ if (esp->dmarev == dvmaesc1) {
u32 end = PAGE_ALIGN(addr + dma_count + 16U);
dma_write32(end - addr, DMA_COUNT);
}
@@ -478,7 +486,7 @@ static const struct esp_driver_ops sbus_esp_ops = {
static int __devinit esp_sbus_probe_one(struct device *dev,
struct sbus_dev *esp_dev,
- struct sbus_dev *espdma,
+ struct of_device *espdma,
struct sbus_bus *sbus,
int hme)
{
@@ -503,7 +511,7 @@ static int __devinit esp_sbus_probe_one(struct device *dev,
if (hme)
esp->flags |= ESP_FLAG_WIDE_CAPABLE;
- err = esp_sbus_find_dma(esp, espdma);
+ err = esp_sbus_setup_dma(esp, espdma);
if (err < 0)
goto fail_unlink;
@@ -525,7 +533,7 @@ static int __devinit esp_sbus_probe_one(struct device *dev,
* come up with the reset bit set, so make sure that
* is clear first.
*/
- if (esp->dma->revision == dvmaesc1) {
+ if (esp->dmarev == dvmaesc1) {
u32 val = dma_read32(DMA_CSR);
dma_write32(val & ~DMA_RST_SCSI, DMA_CSR);
@@ -556,26 +564,32 @@ fail:
static int __devinit esp_sbus_probe(struct of_device *dev, const struct of_device_id *match)
{
struct sbus_dev *sdev = to_sbus_device(&dev->dev);
+ struct device_node *dma_node = NULL;
struct device_node *dp = dev->node;
- struct sbus_dev *dma_sdev = NULL;
+ struct of_device *dma_of = NULL;
int hme = 0;
if (dp->parent &&
(!strcmp(dp->parent->name, "espdma") ||
!strcmp(dp->parent->name, "dma")))
- dma_sdev = sdev->parent;
+ dma_node = dp->parent;
else if (!strcmp(dp->name, "SUNW,fas")) {
- dma_sdev = sdev;
+ dma_node = sdev->ofdev.node;
hme = 1;
}
+ if (dma_node)
+ dma_of = of_find_device_by_node(dma_node);
+ if (!dma_of)
+ return -ENODEV;
- return esp_sbus_probe_one(&dev->dev, sdev, dma_sdev,
+ return esp_sbus_probe_one(&dev->dev, sdev, dma_of,
sdev->bus, hme);
}
static int __devexit esp_sbus_remove(struct of_device *dev)
{
struct esp *esp = dev_get_drvdata(&dev->dev);
+ struct of_device *dma_of = esp->dma;
unsigned int irq = esp->host->irq;
u32 val;
@@ -590,6 +604,8 @@ static int __devexit esp_sbus_remove(struct of_device *dev)
esp->command_block,
esp->command_block_dma);
sbus_iounmap(esp->regs, SBUS_ESP_REG_SIZE);
+ of_iounmap(&dma_of->resource[0], esp->dma_regs,
+ resource_size(&dma_of->resource[0]));
scsi_host_put(esp->host);