diff options
| -rw-r--r-- | drivers/mtd/mtdchar.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/onenand/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/mtd/onenand/onenand_base.c | 313 | ||||
| -rw-r--r-- | include/linux/mtd/onenand.h | 2 | ||||
| -rw-r--r-- | include/linux/mtd/onenand_regs.h | 8 |
5 files changed, 335 insertions, 4 deletions
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 6b83aee8abb..7a7df851c99 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -552,7 +552,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file, break; } -#ifdef CONFIG_MTD_OTP +#if defined(CONFIG_MTD_OTP) || defined(CONFIG_MTD_ONENAND_OTP) case OTPSELECT: { int mode; diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig index 126ff6bf63d..5930a03736d 100644 --- a/drivers/mtd/onenand/Kconfig +++ b/drivers/mtd/onenand/Kconfig @@ -29,6 +29,20 @@ config MTD_ONENAND_GENERIC help Support for OneNAND flash via platform device driver. +config MTD_ONENAND_OTP + bool "OneNAND OTP Support" + depends on MTD_ONENAND + help + One Block of the NAND Flash Array memory is reserved as + a One-Time Programmable Block memory area. + Also, 1st Block of NAND Flash Array can be used as OTP. + + The OTP block can be read, programmed and locked using the same + operations as any other NAND Flash Array memory block. + OTP block cannot be erased. + + OTP block is fully-guaranteed to be a valid block. + config MTD_ONENAND_SYNC_READ bool "OneNAND Sync. Burst Read Support" depends on ARCH_OMAP diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 7c7dc0ae5a1..163c8113544 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -191,7 +191,7 @@ static int onenand_buffer_address(int dataram1, int sectors, int count) static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t len) { struct onenand_chip *this = mtd->priv; - int value, readcmd = 0; + int value, readcmd = 0, block_cmd = 0; int block, page; /* Now we use page size operation */ int sectors = 4, count = 4; @@ -207,6 +207,8 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le case ONENAND_CMD_ERASE: case ONENAND_CMD_BUFFERRAM: + case ONENAND_CMD_OTP_ACCESS: + block_cmd = 1; block = (int) (addr >> this->erase_shift); page = -1; break; @@ -235,7 +237,7 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le value = onenand_block_address(this, block); this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); - if (cmd == ONENAND_CMD_ERASE) { + if (cmd == block_cmd) { /* Select DataRAM for DDP */ value = onenand_bufferram_address(this, block); this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); @@ -1412,6 +1414,304 @@ static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len) return 0; } +#ifdef CONFIG_MTD_ONENAND_OTP + +/* Interal OTP operation */ +typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len, + size_t *retlen, u_char *buf); + +/** + * do_otp_read - [DEFAULT] Read OTP block area + * @param mtd MTD device structure + * @param from The offset to read + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of readbytes + * @param buf the databuffer to put/get data + * + * Read OTP block area. + */ +static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + int ret; + + /* Enter OTP access mode */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + + ret = mtd->read(mtd, from, len, retlen, buf); + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + return ret; +} + +/** + * do_otp_write - [DEFAULT] Write OTP block area + * @param mtd MTD device structure + * @param from The offset to write + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of write bytes + * @param buf the databuffer to put/get data + * + * Write OTP block area. + */ +static int do_otp_write(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + unsigned char *pbuf = buf; + int ret; + + /* Force buffer page aligned */ + if (len < mtd->oobblock) { + memcpy(this->page_buf, buf, len); + memset(this->page_buf + len, 0xff, mtd->oobblock - len); + pbuf = this->page_buf; + len = mtd->oobblock; + } + + /* Enter OTP access mode */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + + ret = mtd->write(mtd, from, len, retlen, pbuf); + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + return ret; +} + +/** + * do_otp_lock - [DEFAULT] Lock OTP block area + * @param mtd MTD device structure + * @param from The offset to lock + * @param len number of bytes to lock + * @param retlen pointer to variable to store the number of lock bytes + * @param buf the databuffer to put/get data + * + * Lock OTP block area. + */ +static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + int ret; + + /* Enter OTP access mode */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + + ret = mtd->write_oob(mtd, from, len, retlen, buf); + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + return ret; +} + +/** + * onenand_otp_walk - [DEFAULT] Handle OTP operation + * @param mtd MTD device structure + * @param from The offset to read/write + * @param len number of bytes to read/write + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data + * @param action do given action + * @param mode specify user and factory + * + * Handle OTP operation. + */ +static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf, + otp_op_t action, int mode) +{ + struct onenand_chip *this = mtd->priv; + int otp_pages; + int density; + int ret = 0; + + *retlen = 0; + + density = this->device_id >> ONENAND_DEVICE_DENSITY_SHIFT; + if (density < ONENAND_DEVICE_DENSITY_512Mb) + otp_pages = 20; + else + otp_pages = 10; + + if (mode == MTD_OTP_FACTORY) { + from += mtd->oobblock * otp_pages; + otp_pages = 64 - otp_pages; + } + + /* Check User/Factory boundary */ + if (((mtd->oobblock * otp_pages) - (from + len)) < 0) + return 0; + + while (len > 0 && otp_pages > 0) { + if (!action) { /* OTP Info functions */ + struct otp_info *otpinfo; + + len -= sizeof(struct otp_info); + if (len <= 0) + return -ENOSPC; + + otpinfo = (struct otp_info *) buf; + otpinfo->start = from; + otpinfo->length = mtd->oobblock; + otpinfo->locked = 0; + + from += mtd->oobblock; + buf += sizeof(struct otp_info); + *retlen += sizeof(struct otp_info); + } else { + size_t tmp_retlen; + int size = len; + + ret = action(mtd, from, len, &tmp_retlen, buf); + + buf += size; + len -= size; + *retlen += size; + + if (ret < 0) + return ret; + } + otp_pages--; + } + + return 0; +} + +/** + * onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info + * @param mtd MTD device structure + * @param buf the databuffer to put/get data + * @param len number of bytes to read + * + * Read factory OTP info. + */ +static int onenand_get_fact_prot_info(struct mtd_info *mtd, + struct otp_info *buf, size_t len) +{ + size_t retlen; + int ret; + + ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_FACTORY); + + return ret ? : retlen; +} + +/** + * onenand_read_fact_prot_reg - [MTD Interface] Read factory OTP area + * @param mtd MTD device structure + * @param from The offset to read + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data + * + * Read factory OTP area. + */ +static int onenand_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_FACTORY); +} + +/** + * onenand_get_user_prot_info - [MTD Interface] Read user OTP info + * @param mtd MTD device structure + * @param buf the databuffer to put/get data + * @param len number of bytes to read + * + * Read user OTP info. + */ +static int onenand_get_user_prot_info(struct mtd_info *mtd, + struct otp_info *buf, size_t len) +{ + size_t retlen; + int ret; + + ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_USER); + + return ret ? : retlen; +} + +/** + * onenand_read_user_prot_reg - [MTD Interface] Read user OTP area + * @param mtd MTD device structure + * @param from The offset to read + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data + * + * Read user OTP area. + */ +static int onenand_read_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_USER); +} + +/** + * onenand_write_user_prot_reg - [MTD Interface] Write user OTP area + * @param mtd MTD device structure + * @param from The offset to write + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of write bytes + * @param buf the databuffer to put/get data + * + * Write user OTP area. + */ +static int onenand_write_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_write, MTD_OTP_USER); +} + +/** + * onenand_lock_user_prot_reg - [MTD Interface] Lock user OTP area + * @param mtd MTD device structure + * @param from The offset to lock + * @param len number of bytes to unlock + * + * Write lock mark on spare area in page 0 in OTP block + */ +static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len) +{ + unsigned char oob_buf[64]; + size_t retlen; + int ret; + + memset(oob_buf, 0xff, mtd->oobsize); + /* + * Note: OTP lock operation + * OTP block : 0xXXFC + * 1st block : 0xXXF3 (If chip support) + * Both : 0xXXF0 (If chip support) + */ + oob_buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC; + + /* + * Write lock mark to 8th word of sector0 of page0 of the spare0. + * We write 16 bytes spare area instead of 2 bytes. + */ + from = 0; + len = 16; + + ret = onenand_otp_walk(mtd, from, len, &retlen, oob_buf, do_otp_lock, MTD_OTP_USER); + + return ret ? : retlen; +} +#endif /* CONFIG_MTD_ONENAND_OTP */ + /** * onenand_print_device_info - Print device ID * @param device device ID @@ -1563,7 +1863,6 @@ static void onenand_resume(struct mtd_info *mtd) "in suspended state\n"); } - /** * onenand_scan - [OneNAND Interface] Scan for the OneNAND device * @param mtd MTD device structure @@ -1655,6 +1954,14 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) mtd->write_ecc = onenand_write_ecc; mtd->read_oob = onenand_read_oob; mtd->write_oob = onenand_write_oob; +#ifdef CONFIG_MTD_ONENAND_OTP + mtd->get_fact_prot_info = onenand_get_fact_prot_info; + mtd->read_fact_prot_reg = onenand_read_fact_prot_reg; + mtd->get_user_prot_info = onenand_get_user_prot_info; + mtd->read_user_prot_reg = onenand_read_user_prot_reg; + mtd->write_user_prot_reg = onenand_write_user_prot_reg; + mtd->lock_user_prot_reg = onenand_lock_user_prot_reg; +#endif mtd->readv = NULL; mtd->readv_ecc = NULL; mtd->writev = onenand_writev; diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 22322c8a772..3f5919f2e9d 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -35,6 +35,8 @@ typedef enum { FL_SYNCING, FL_UNLOCKING, FL_LOCKING, + FL_RESETING, + FL_OTPING, FL_PM_SUSPENDED, } onenand_state_t; diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h index d7832ef8ed6..4a72818d254 100644 --- a/include/linux/mtd/onenand_regs.h +++ b/include/linux/mtd/onenand_regs.h @@ -112,6 +112,7 @@ #define ONENAND_CMD_LOCK_TIGHT (0x2C) #define ONENAND_CMD_ERASE (0x94) #define ONENAND_CMD_RESET (0xF0) +#define ONENAND_CMD_OTP_ACCESS (0x65) #define ONENAND_CMD_READID (0x90) /* NOTE: Those are not *REAL* commands */ @@ -152,6 +153,8 @@ #define ONENAND_CTRL_ERASE (1 << 11) #define ONENAND_CTRL_ERROR (1 << 10) #define ONENAND_CTRL_RSTB (1 << 7) +#define ONENAND_CTRL_OTP_L (1 << 6) +#define ONENAND_CTRL_OTP_BL (1 << 5) /* * Interrupt Status Register F241h (R) @@ -177,4 +180,9 @@ #define ONENAND_ECC_2BIT (1 << 1) #define ONENAND_ECC_2BIT_ALL (0xAAAA) +/* + * One-Time Programmable (OTP) + */ +#define ONENAND_OTP_LOCK_OFFSET (14) + #endif /* __ONENAND_REG_H */ |