aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-omap1/io.c42
-rw-r--r--arch/arm/plat-omap/sram.c9
-rw-r--r--include/asm-arm/arch-omap/io.h6
3 files changed, 39 insertions, 18 deletions
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index a7a19f75b9e..82d556be79c 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <asm/io.h>
#include <asm/arch/mux.h>
@@ -83,15 +84,24 @@ static struct map_desc omap16xx_io_desc[] __initdata = {
};
#endif
-static int initialized = 0;
-
-static void __init _omap_map_io(void)
+/*
+ * Maps common IO regions for omap1. This should only get called from
+ * board specific init.
+ */
+void __init omap1_map_common_io(void)
{
- initialized = 1;
-
- /* We have to initialize the IO space mapping before we can run
- * cpu_is_omapxxx() macros. */
iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
+
+ /* Normally devicemaps_init() would flush caches and tlb after
+ * mdesc->map_io(), but we must also do it here because of the CPU
+ * revision check below.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /* We want to check CPU revision early for cpu_is_omapxxxx() macros.
+ * IO space mapping must be initialized before we can do that.
+ */
omap_check_revision();
#ifdef CONFIG_ARCH_OMAP730
@@ -111,7 +121,14 @@ static void __init _omap_map_io(void)
#endif
omap_sram_init();
+}
+/*
+ * Common low-level hardware init for omap1. This should only get called from
+ * board specific init.
+ */
+void __init omap1_init_common_hw()
+{
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
*/
@@ -121,16 +138,7 @@ static void __init _omap_map_io(void)
/* Must init clocks early to assure that timer interrupt works
*/
omap1_clk_init();
-}
-/*
- * This should only get called from board specific init
- */
-void __init omap_map_common_io(void)
-{
- if (!initialized) {
- _omap_map_io();
- omap1_mux_init();
- }
+ omap1_mux_init();
}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 792f6637583..ee82763b02b 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <asm/mach/map.h>
+#include <asm/tlb.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
@@ -96,6 +97,14 @@ void __init omap_map_sram(void)
omap_sram_io_desc[0].length);
/*
+ * Normally devicemaps_init() would flush caches and tlb after
+ * mdesc->map_io(), but since we're called from map_io(), we
+ * must do it here.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /*
* Looks like we need to preserve some bootloader code at the
* beginning of SRAM for jumping to flash for reboot to work...
*/
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index f5bcc9a1aed..b726acfcab1 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -116,7 +116,11 @@ typedef struct { volatile u32 offset[4096]; } __regbase32;
->offset[((vaddr)&4095)>>2]
#define __REG32(paddr) __REGV32(io_p2v(paddr))
-extern void omap_map_common_io(void);
+extern void omap1_map_common_io(void);
+extern void omap1_init_common_hw(void);
+
+extern void omap2_map_common_io(void);
+extern void omap2_init_common_hw(void);
#else