diff options
-rw-r--r-- | arch/sh/Kconfig.debug | 4 | ||||
-rw-r--r-- | arch/sh/boards/mach-se/7206/io.c | 2 | ||||
-rw-r--r-- | arch/sh/boards/mach-se/7724/setup.c | 110 | ||||
-rw-r--r-- | arch/sh/configs/migor_defconfig | 53 | ||||
-rw-r--r-- | arch/sh/configs/se7724_defconfig | 25 | ||||
-rw-r--r-- | arch/sh/include/asm/perf_counter.h | 2 | ||||
-rw-r--r-- | arch/sh/include/asm/syscall_32.h | 1 | ||||
-rw-r--r-- | arch/sh/include/mach-se/mach/se7724.h | 5 | ||||
-rw-r--r-- | arch/sh/mm/fault_32.c | 61 | ||||
-rw-r--r-- | arch/sh/mm/tlbflush_64.c | 15 | ||||
-rw-r--r-- | drivers/clocksource/sh_tmu.c | 2 | ||||
-rw-r--r-- | drivers/video/sh_mobile_lcdcfb.c | 53 | ||||
-rw-r--r-- | mm/nommu.c | 21 | ||||
-rw-r--r-- | tools/perf/perf.h | 10 |
14 files changed, 307 insertions, 57 deletions
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 8ece0b5bd02..39224b57c6e 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -61,10 +61,6 @@ config EARLY_PRINTK select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using the kernel command line option to toggle back and forth. -config DEBUG_BOOTMEM - depends on DEBUG_KERNEL - bool "Debug BOOTMEM initialization" - config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL && SUPERH32 diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c index 9c3a33210d6..180455642a4 100644 --- a/arch/sh/boards/mach-se/7206/io.c +++ b/arch/sh/boards/mach-se/7206/io.c @@ -50,7 +50,7 @@ unsigned char se7206_inb_p(unsigned long port) unsigned short se7206_inw(unsigned long port) { - return *port2adr(port);; + return *port2adr(port); } void se7206_outb(unsigned char value, unsigned long port) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 9cd04bd558b..c050a8d76df 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -23,6 +23,8 @@ #include <media/sh_mobile_ceu.h> #include <asm/io.h> #include <asm/heartbeat.h> +#include <asm/sh_eth.h> +#include <asm/clock.h> #include <asm/sh_keysc.h> #include <cpu/sh7724.h> #include <mach-se/mach/se7724.h> @@ -272,6 +274,34 @@ static struct platform_device keysc_device = { }, }; +/* SH Eth */ +static struct resource sh_eth_resources[] = { + [0] = { + .start = SH_ETH_ADDR, + .end = SH_ETH_ADDR + 0x1FC, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 91, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +struct sh_eth_plat_data sh_eth_plat = { + .phy = 0x1f, /* SMSC LAN8187 */ + .edmac_endian = EDMAC_LITTLE_ENDIAN, +}; + +static struct platform_device sh_eth_device = { + .name = "sh-eth", + .id = 0, + .dev = { + .platform_data = &sh_eth_plat, + }, + .num_resources = ARRAY_SIZE(sh_eth_resources), + .resource = sh_eth_resources, +}; + static struct platform_device *ms7724se_devices[] __initdata = { &heartbeat_device, &smc91x_eth_device, @@ -280,8 +310,57 @@ static struct platform_device *ms7724se_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, + &sh_eth_device, }; +#define EEPROM_OP 0xBA206000 +#define EEPROM_ADR 0xBA206004 +#define EEPROM_DATA 0xBA20600C +#define EEPROM_STAT 0xBA206010 +#define EEPROM_STRT 0xBA206014 +static int __init sh_eth_is_eeprom_ready(void) +{ + int t = 10000; + + while (t--) { + if (!ctrl_inw(EEPROM_STAT)) + return 1; + cpu_relax(); + } + + printk(KERN_ERR "ms7724se can not access to eeprom\n"); + return 0; +} + +static void __init sh_eth_init(void) +{ + int i; + u16 mac[3]; + + /* check EEPROM status */ + if (!sh_eth_is_eeprom_ready()) + return; + + /* read MAC addr from EEPROM */ + for (i = 0 ; i < 3 ; i++) { + ctrl_outw(0x0, EEPROM_OP); /* read */ + ctrl_outw(i*2, EEPROM_ADR); + ctrl_outw(0x1, EEPROM_STRT); + if (!sh_eth_is_eeprom_ready()) + return; + + mac[i] = ctrl_inw(EEPROM_DATA); + mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */ + } + + /* reset sh-eth */ + ctrl_outl(0x1, SH_ETH_ADDR + 0x0); + + /* set MAC addr */ + ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR); + ctrl_outl((mac[2]), SH_ETH_MALR); +} + #define SW4140 0xBA201000 #define FPGA_OUT 0xBA200400 #define PORT_HIZA 0xA4050158 @@ -302,7 +381,8 @@ static int __init devices_setup(void) ctrl_outw(ctrl_inw(FPGA_OUT) & ~((1 << 1) | /* LAN */ (1 << 6) | /* VIDEO DAC */ - (1 << 12)), /* USB0 */ + (1 << 12) | /* USB0 */ + (1 << 14)), /* RMII */ FPGA_OUT); /* enable IRQ 0,1,2 */ @@ -374,7 +454,7 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_VIO0_CLK, NULL); gpio_request(GPIO_FN_VIO0_FLD, NULL); gpio_request(GPIO_FN_VIO0_HD, NULL); - platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20); + platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20); /* enable CEU1 */ gpio_request(GPIO_FN_VIO1_D7, NULL); @@ -389,7 +469,7 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_VIO1_HD, NULL); gpio_request(GPIO_FN_VIO1_VD, NULL); gpio_request(GPIO_FN_VIO1_CLK, NULL); - platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20); + platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20); /* KEYSC */ gpio_request(GPIO_FN_KEYOUT5_IN5, NULL); @@ -404,6 +484,28 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_KEYOUT1, NULL); gpio_request(GPIO_FN_KEYOUT0, NULL); + /* + * enable SH-Eth + * + * please remove J33 pin from your board !! + * + * ms7724 board should not use GPIO_FN_LNKSTA pin + * So, This time PTX5 is set to input pin + */ + gpio_request(GPIO_FN_RMII_RXD0, NULL); + gpio_request(GPIO_FN_RMII_RXD1, NULL); + gpio_request(GPIO_FN_RMII_TXD0, NULL); + gpio_request(GPIO_FN_RMII_TXD1, NULL); + gpio_request(GPIO_FN_RMII_REF_CLK, NULL); + gpio_request(GPIO_FN_RMII_TX_EN, NULL); + gpio_request(GPIO_FN_RMII_RX_ER, NULL); + gpio_request(GPIO_FN_RMII_CRS_DV, NULL); + gpio_request(GPIO_FN_MDIO, NULL); + gpio_request(GPIO_FN_MDC, NULL); + gpio_request(GPIO_PTX5, NULL); + gpio_direction_input(GPIO_PTX5); + sh_eth_init(); + if (sw & SW41_B) { /* SVGA */ lcdc_info.ch[0].lcd_cfg.xres = 800; @@ -437,7 +539,7 @@ static int __init devices_setup(void) } return platform_add_devices(ms7724se_devices, - ARRAY_SIZE(ms7724se_devices)); + ARRAY_SIZE(ms7724se_devices)); } device_initcall(devices_setup); diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index da627d22c00..b18cfd39cac 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -309,7 +309,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp" +CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp" # # Bus options @@ -858,7 +858,35 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_SH_MOBILE_LCDC=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -870,6 +898,27 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_SUPERH_MONO is not set +CONFIG_LOGO_SUPERH_VGA16=y +# CONFIG_LOGO_SUPERH_CLUT224 is not set # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig index 3840270283e..3ee783a0a07 100644 --- a/arch/sh/configs/se7724_defconfig +++ b/arch/sh/configs/se7724_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30 -# Thu Jun 18 16:09:05 2009 +# Mon Jun 29 16:28:43 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_IRQ_PER_CPU=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y @@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -88,10 +91,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y # # Performance Counters # +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y # CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y @@ -107,6 +112,10 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -119,7 +128,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -584,7 +593,6 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -624,7 +632,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set -# CONFIG_SH_ETH is not set +CONFIG_SH_ETH=y CONFIG_SMC91X=y # CONFIG_ENC28J60 is not set # CONFIG_ETHOC is not set @@ -801,6 +809,11 @@ CONFIG_SPI_BITBANG=y # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set @@ -851,6 +864,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=y @@ -1196,6 +1211,7 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1260,6 +1276,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set CONFIG_FILE_LOCKING=y diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h index a8153c2aa6f..61c2b40c802 100644 --- a/arch/sh/include/asm/perf_counter.h +++ b/arch/sh/include/asm/perf_counter.h @@ -2,6 +2,6 @@ #define __ASM_SH_PERF_COUNTER_H /* SH only supports software counters through this interface. */ -#define set_perf_counter_pending() do { } while (0) +static inline void set_perf_counter_pending(void) {} #endif /* __ASM_SH_PERF_COUNTER_H */ diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h index 5bc34681d99..6f83f2cc45c 100644 --- a/arch/sh/include/asm/syscall_32.h +++ b/arch/sh/include/asm/syscall_32.h @@ -3,6 +3,7 @@ #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/err.h> #include <asm/ptrace.h> /* The system call number is given by the user in R3 */ diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h index 74164b60d0d..29514a39d0f 100644 --- a/arch/sh/include/mach-se/mach/se7724.h +++ b/arch/sh/include/mach-se/mach/se7724.h @@ -20,6 +20,11 @@ */ #include <asm/addrspace.h> +/* SH Eth */ +#define SH_ETH_ADDR (0xA4600000) +#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0) +#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8) + #define PA_LED (0xba203000) /* 8bit LED */ #define IRQ_MODE (0xba200010) #define IRQ0_SR (0xba200014) diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c index cc8ddbdf3d7..71925946f1e 100644 --- a/arch/sh/mm/fault_32.c +++ b/arch/sh/mm/fault_32.c @@ -15,12 +15,28 @@ #include <linux/mm.h> #include <linux/hardirq.h> #include <linux/kprobes.h> -#include <linux/marker.h> +#include <linux/perf_counter.h> #include <asm/io_trapped.h> #include <asm/system.h> #include <asm/mmu_context.h> #include <asm/tlbflush.h> +static inline int notify_page_fault(struct pt_regs *regs, int trap) +{ + int ret = 0; + +#ifdef CONFIG_KPROBES + if (!user_mode(regs)) { + preempt_disable(); + if (kprobe_running() && kprobe_fault_handler(regs, trap)) + ret = 1; + preempt_enable(); + } +#endif + + return ret; +} + /* * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate @@ -87,13 +103,16 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, return; } + mm = tsk->mm; + + if (unlikely(notify_page_fault(regs, lookup_exception_vector()))) + return; + /* Only enable interrupts if they were on before the fault */ - if ((regs->sr & SR_IMASK) != SR_IMASK) { - trace_hardirqs_on(); + if ((regs->sr & SR_IMASK) != SR_IMASK) local_irq_enable(); - } - mm = tsk->mm; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); /* * If we're in an interrupt or have no user @@ -141,10 +160,15 @@ survive: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) + if (fault & VM_FAULT_MAJOR) { tsk->maj_flt++; - else + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); + } else { tsk->min_flt++; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } up_read(&mm->mmap_sem); return; @@ -245,22 +269,6 @@ do_sigbus: goto no_context; } -static inline int notify_page_fault(struct pt_regs *regs, int trap) -{ - int ret = 0; - -#ifdef CONFIG_KPROBES - if (!user_mode(regs)) { - preempt_disable(); - if (kprobe_running() && kprobe_fault_handler(regs, trap)) - ret = 1; - preempt_enable(); - } -#endif - - return ret; -} - /* * Called with interrupts disabled. */ @@ -273,12 +281,7 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, pmd_t *pmd; pte_t *pte; pte_t entry; - int ret = 0; - - if (notify_page_fault(regs, lookup_exception_vector())) - goto out; - - ret = 1; + int ret = 1; /* * We don't take page faults for P1, P2, and parts of P4, these diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c index fcbb6e135ce..3ce40ea3482 100644 --- a/arch/sh/mm/tlbflush_64.c +++ b/arch/sh/mm/tlbflush_64.c @@ -3,7 +3,7 @@ * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003 Richard Curnow (/proc/tlb, bug fixes) - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -20,6 +20,7 @@ #include <linux/mman.h> #include <linux/mm.h> #include <linux/smp.h> +#include <linux/perf_counter.h> #include <linux/interrupt.h> #include <asm/system.h> #include <asm/io.h> @@ -115,6 +116,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, /* Not an IO address, so reenable interrupts */ local_irq_enable(); + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); + /* * If we're in an interrupt or have no user * context, we must not take the fault.. @@ -195,10 +198,16 @@ survive: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) + + if (fault & VM_FAULT_MAJOR) { tsk->maj_flt++; - else + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); + } else { tsk->min_flt++; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } /* If we get here, the page fault has been handled. Do the TLB refill now from the newly-setup PTE, to avoid having to fault again right diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 9ffb05f4095..93c2322feab 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -161,7 +161,7 @@ static void sh_tmu_set_next(struct sh_tmu_priv *p, unsigned long delta, if (periodic) sh_tmu_write(p, TCOR, delta); else - sh_tmu_write(p, TCOR, 0); + sh_tmu_write(p, TCOR, 0xffffffff); sh_tmu_write(p, TCNT, delta); diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index f10d2fbeda0..da983b720f0 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/interrupt.h> +#include <linux/vmalloc.h> #include <video/sh_mobile_lcdc.h> #include <asm/atomic.h> @@ -33,6 +34,7 @@ struct sh_mobile_lcdc_chan { struct fb_info info; dma_addr_t dma_handle; struct fb_deferred_io defio; + struct scatterlist *sglist; unsigned long frame_end; wait_queue_head_t frame_end_wait; }; @@ -206,16 +208,38 @@ static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv) {} static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv) {} #endif +static int sh_mobile_lcdc_sginit(struct fb_info *info, + struct list_head *pagelist) +{ + struct sh_mobile_lcdc_chan *ch = info->par; + unsigned int nr_pages_max = info->fix.smem_len >> PAGE_SHIFT; + struct page *page; + int nr_pages = 0; + + sg_init_table(ch->sglist, nr_pages_max); + + list_for_each_entry(page, pagelist, lru) + sg_set_page(&ch->sglist[nr_pages++], page, PAGE_SIZE, 0); + + return nr_pages; +} + static void sh_mobile_lcdc_deferred_io(struct fb_info *info, struct list_head *pagelist) { struct sh_mobile_lcdc_chan *ch = info->par; + unsigned int nr_pages; /* enable clocks before accessing hardware */ sh_mobile_lcdc_clk_on(ch->lcdc); + nr_pages = sh_mobile_lcdc_sginit(info, pagelist); + dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE); + /* trigger panel update */ lcdc_write_chan(ch, LDSM2R, 1); + + dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE); } static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info) @@ -846,21 +870,31 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev) } for (i = 0; i < j; i++) { - error = register_framebuffer(&priv->ch[i].info); + struct sh_mobile_lcdc_chan *ch = priv->ch + i; + + info = &ch->info; + + if (info->fbdefio) { + priv->ch->sglist = vmalloc(sizeof(struct scatterlist) * + info->fix.smem_len >> PAGE_SHIFT); + if (!priv->ch->sglist) { + dev_err(&pdev->dev, "cannot allocate sglist\n"); + goto err1; + } + } + + error = register_framebuffer(info); if (error < 0) goto err1; - } - for (i = 0; i < j; i++) { - info = &priv->ch[i].info; dev_info(info->dev, "registered %s/%s as %dx%d %dbpp.\n", pdev->name, - (priv->ch[i].cfg.chan == LCDC_CHAN_MAINLCD) ? + (ch->cfg.chan == LCDC_CHAN_MAINLCD) ? "mainlcd" : "sublcd", - (int) priv->ch[i].cfg.lcd_cfg.xres, - (int) priv->ch[i].cfg.lcd_cfg.yres, - priv->ch[i].cfg.bpp); + (int) ch->cfg.lcd_cfg.xres, + (int) ch->cfg.lcd_cfg.yres, + ch->cfg.bpp); /* deferred io mode: disable clock to save power */ if (info->fbdefio) @@ -892,6 +926,9 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev) if (!info->device) continue; + if (priv->ch[i].sglist) + vfree(priv->ch[i].sglist); + dma_free_coherent(&pdev->dev, info->fix.smem_len, info->screen_base, priv->ch[i].dma_handle); fb_dealloc_cmap(&info->cmap); diff --git a/mm/nommu.c b/mm/nommu.c index bf0cc762a7d..53cab10fece 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -238,6 +238,27 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, } EXPORT_SYMBOL(get_user_pages); +/** + * follow_pfn - look up PFN at a user virtual address + * @vma: memory mapping + * @address: user virtual address + * @pfn: location to store found PFN + * + * Only IO mappings and raw PFN mappings are allowed. + * + * Returns zero and the pfn at @pfn on success, -ve otherwise. + */ +int follow_pfn(struct vm_area_struct *vma, unsigned long address, + unsigned long *pfn) +{ + if (!(vma->vm_flags & (VM_IO | VM_PFNMAP))) + return -EINVAL; + + *pfn = address >> PAGE_SHIFT; + return 0; +} +EXPORT_SYMBOL(follow_pfn); + DEFINE_RWLOCK(vmlist_lock); struct vm_struct *vmlist; diff --git a/tools/perf/perf.h b/tools/perf/perf.h index ce394192c85..8f729aedc1a 100644 --- a/tools/perf/perf.h +++ b/tools/perf/perf.h @@ -19,6 +19,16 @@ #define cpu_relax() asm volatile("" ::: "memory"); #endif +#ifdef __sh__ +#include "../../arch/sh/include/asm/unistd.h" +#if defined(__SH4A__) || defined(__SH5__) +# define rmb() asm volatile("synco" ::: "memory") +#else +# define rmb() asm volatile("" ::: "memory") +#endif +#define cpu_relax() asm volatile("" ::: "memory") +#endif + #include <time.h> #include <unistd.h> #include <sys/types.h> |