aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/kernel-parameters.txt5
-rw-r--r--arch/i386/kernel/Makefile1
-rw-r--r--arch/i386/kernel/hpet.c67
-rw-r--r--arch/i386/kernel/i8253.c53
-rw-r--r--arch/i386/kernel/time.c3
-rw-r--r--arch/i386/kernel/tsc.c161
-rw-r--r--drivers/Makefile1
-rw-r--r--drivers/clocksource/Makefile2
-rw-r--r--drivers/clocksource/acpi_pm.c177
-rw-r--r--drivers/clocksource/cyclone.c119
-rw-r--r--kernel/time/clocksource.c11
11 files changed, 594 insertions, 6 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 968631678d4..2e352a605fc 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -180,6 +180,11 @@ running once the system is up.
override platform specific driver.
See also Documentation/acpi-hotkey.txt.
+ acpi_pm_good [IA-32,X86-64]
+ Override the pmtimer bug detection: force the kernel
+ to assume that this machine's pmtimer latches its value
+ and always returns good values.
+
enable_timer_pin_1 [i386,x86-64]
Enable PIN 1 of APIC timer
Can be useful to work around chipset bugs
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index f238cb6274e..0fac85df64f 100644
--- a/arch/i386/kernel/Makefile
+++ b/arch/i386/kernel/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_EFI) += efi.o efi_stub.o
obj-$(CONFIG_DOUBLEFAULT) += doublefault.o
obj-$(CONFIG_VM86) += vm86.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_HPET_TIMER) += hpet.o
EXTRA_AFLAGS := -traditional
diff --git a/arch/i386/kernel/hpet.c b/arch/i386/kernel/hpet.c
new file mode 100644
index 00000000000..91a5bdd9f60
--- /dev/null
+++ b/arch/i386/kernel/hpet.c
@@ -0,0 +1,67 @@
+#include <linux/clocksource.h>
+#include <linux/errno.h>
+#include <linux/hpet.h>
+#include <linux/init.h>
+
+#include <asm/hpet.h>
+#include <asm/io.h>
+
+#define HPET_MASK 0xFFFFFFFF
+#define HPET_SHIFT 22
+
+/* FSEC = 10^-15 NSEC = 10^-9 */
+#define FSEC_PER_NSEC 1000000
+
+static void *hpet_ptr;
+
+static cycle_t read_hpet(void)
+{
+ return (cycle_t)readl(hpet_ptr);
+}
+
+static struct clocksource clocksource_hpet = {
+ .name = "hpet",
+ .rating = 250,
+ .read = read_hpet,
+ .mask = (cycle_t)HPET_MASK,
+ .mult = 0, /* set below */
+ .shift = HPET_SHIFT,
+ .is_continuous = 1,
+};
+
+static int __init init_hpet_clocksource(void)
+{
+ unsigned long hpet_period;
+ void __iomem* hpet_base;
+ u64 tmp;
+
+ if (!hpet_address)
+ return -ENODEV;
+
+ /* calculate the hpet address: */
+ hpet_base =
+ (void __iomem*)ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
+ hpet_ptr = hpet_base + HPET_COUNTER;
+
+ /* calculate the frequency: */
+ hpet_period = readl(hpet_base + HPET_PERIOD);
+
+ /*
+ * hpet period is in femto seconds per cycle
+ * so we need to convert this to ns/cyc units
+ * aproximated by mult/2^shift
+ *
+ * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
+ * fsec/cyc * 1ns/1000000fsec * 2^shift = mult
+ * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
+ * (fsec/cyc << shift)/1000000 = mult
+ * (hpet_period << shift)/FSEC_PER_NSEC = mult
+ */
+ tmp = (u64)hpet_period << HPET_SHIFT;
+ do_div(tmp, FSEC_PER_NSEC);
+ clocksource_hpet.mult = (u32)tmp;
+
+ return register_clocksource(&clocksource_hpet);
+}
+
+module_init(init_hpet_clocksource);
diff --git a/arch/i386/kernel/i8253.c b/arch/i386/kernel/i8253.c
index 29cb2eb3436..a276bceade6 100644
--- a/arch/i386/kernel/i8253.c
+++ b/arch/i386/kernel/i8253.c
@@ -2,6 +2,7 @@
* i8253.c 8253/PIT functions
*
*/
+#include <linux/clocksource.h>
#include <linux/spinlock.h>
#include <linux/jiffies.h>
#include <linux/sysdev.h>
@@ -30,3 +31,55 @@ void setup_pit_timer(void)
outb(LATCH >> 8 , PIT_CH0); /* MSB */
spin_unlock_irqrestore(&i8253_lock, flags);
}
+
+/*
+ * Since the PIT overflows every tick, its not very useful
+ * to just read by itself. So use jiffies to emulate a free
+ * running counter:
+ */
+static cycle_t pit_read(void)
+{
+ unsigned long flags;
+ int count;
+ u64 jifs;
+
+ spin_lock_irqsave(&i8253_lock, flags);
+ outb_p(0x00, PIT_MODE); /* latch the count ASAP */
+ count = inb_p(PIT_CH0); /* read the latched count */
+ count |= inb_p(PIT_CH0) << 8;
+
+ /* VIA686a test code... reset the latch if count > max + 1 */
+ if (count > LATCH) {
+ outb_p(0x34, PIT_MODE);
+ outb_p(LATCH & 0xff, PIT_CH0);
+ outb(LATCH >> 8, PIT_CH0);
+ count = LATCH - 1;
+ }
+ spin_unlock_irqrestore(&i8253_lock, flags);
+
+ jifs = jiffies_64;
+
+ jifs -= INITIAL_JIFFIES;
+ count = (LATCH-1) - count;
+
+ return (cycle_t)(jifs * LATCH) + count;
+}
+
+static struct clocksource clocksource_pit = {
+ .name = "pit",
+ .rating = 110,
+ .read = pit_read,
+ .mask = (cycle_t)-1,
+ .mult = 0,
+ .shift = 20,
+};
+
+static int __init init_pit_clocksource(void)
+{
+ if (num_possible_cpus() > 4) /* PIT does not scale! */
+ return 0;
+
+ clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
+ return register_clocksource(&clocksource_pit);
+}
+module_init(init_pit_clocksource);
diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
index 2a6ab86ffc1..5f43d041012 100644
--- a/arch/i386/kernel/time.c
+++ b/arch/i386/kernel/time.c
@@ -82,9 +82,6 @@ extern unsigned long wall_jiffies;
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
-/* XXX - necessary to keep things compiling. to be removed later */
-u32 pmtmr_ioport;
-
/*
* This is a special lock that is owned by the CPU and holds the index
* register we are working with. It is required for NMI access to the
diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c
index 96b307495e5..7713f86389a 100644
--- a/arch/i386/kernel/tsc.c
+++ b/arch/i386/kernel/tsc.c
@@ -4,11 +4,14 @@
* See comments there for proper credits.
*/
+#include <linux/clocksource.h>
#include <linux/workqueue.h>
#include <linux/cpufreq.h>
#include <linux/jiffies.h>
#include <linux/init.h>
+#include <linux/dmi.h>
+#include <asm/delay.h>
#include <asm/tsc.h>
#include <asm/delay.h>
#include <asm/io.h>
@@ -315,3 +318,161 @@ static int __init cpufreq_tsc(void)
core_initcall(cpufreq_tsc);
#endif
+
+/* clock source code */
+
+static unsigned long current_tsc_khz = 0;
+static int tsc_update_callback(void);
+
+static cycle_t read_tsc(void)
+{
+ cycle_t ret;
+
+ rdtscll(ret);
+
+ return ret;
+}
+
+static struct clocksource clocksource_tsc = {
+ .name = "tsc",
+ .rating = 300,
+ .read = read_tsc,
+ .mask = (cycle_t)-1,
+ .mult = 0, /* to be set */
+ .shift = 22,
+ .update_callback = tsc_update_callback,
+ .is_continuous = 1,
+};
+
+static int tsc_update_callback(void)
+{
+ int change = 0;
+
+ /* check to see if we should switch to the safe clocksource: */
+ if (clocksource_tsc.rating != 50 && check_tsc_unstable()) {
+ clocksource_tsc.rating = 50;
+ reselect_clocksource();
+ change = 1;
+ }
+
+ /* only update if tsc_khz has changed: */
+ if (current_tsc_khz != tsc_khz) {
+ current_tsc_khz = tsc_khz;
+ clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
+ clocksource_tsc.shift);
+ change = 1;
+ }
+
+ return change;
+}
+
+static int __init dmi_mark_tsc_unstable(struct dmi_system_id *d)
+{
+ printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
+ d->ident);
+ mark_tsc_unstable();
+ return 0;
+}
+
+/* List of systems that have known TSC problems */
+static struct dmi_system_id __initdata bad_tsc_dmi_table[] = {
+ {
+ .callback = dmi_mark_tsc_unstable,
+ .ident = "IBM Thinkpad 380XD",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BOARD_NAME, "2635FA0"),
+ },
+ },
+ {}
+};
+
+#define TSC_FREQ_CHECK_INTERVAL (10*MSEC_PER_SEC) /* 10sec in MS */
+static struct timer_list verify_tsc_freq_timer;
+
+/* XXX - Probably should add locking */
+static void verify_tsc_freq(unsigned long unused)
+{
+ static u64 last_tsc;
+ static unsigned long last_jiffies;
+
+ u64 now_tsc, interval_tsc;
+ unsigned long now_jiffies, interval_jiffies;
+
+
+ if (check_tsc_unstable())
+ return;
+
+ rdtscll(now_tsc);
+ now_jiffies = jiffies;
+
+ if (!last_jiffies) {
+ goto out;
+ }
+
+ interval_jiffies = now_jiffies - last_jiffies;
+ interval_tsc = now_tsc - last_tsc;
+ interval_tsc *= HZ;
+ do_div(interval_tsc, cpu_khz*1000);
+
+ if (interval_tsc < (interval_jiffies * 3 / 4)) {
+ printk("TSC appears to be running slowly. "
+ "Marking it as unstable\n");
+ mark_tsc_unstable();
+ return;
+ }
+
+out:
+ last_tsc = now_tsc;
+ last_jiffies = now_jiffies;
+ /* set us up to go off on the next interval: */
+ mod_timer(&verify_tsc_freq_timer,
+ jiffies + msecs_to_jiffies(TSC_FREQ_CHECK_INTERVAL));
+}
+
+/*
+ * Make an educated guess if the TSC is trustworthy and synchronized
+ * over all CPUs.
+ */
+static __init int unsynchronized_tsc(void)
+{
+ /*
+ * Intel systems are normally all synchronized.
+ * Exceptions must mark TSC as unstable:
+ */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+ return 0;
+
+ /* assume multi socket systems are not synchronized: */
+ return num_possible_cpus() > 1;
+}
+
+static int __init init_tsc_clocksource(void)
+{
+
+ if (cpu_has_tsc && tsc_khz && !tsc_disable) {
+ /* check blacklist */
+ dmi_check_system(bad_tsc_dmi_table);
+
+ if (unsynchronized_tsc()) /* mark unstable if unsynced */
+ mark_tsc_unstable();
+ current_tsc_khz = tsc_khz;
+ clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
+ clocksource_tsc.shift);
+ /* lower the rating if we already know its unstable: */
+ if (check_tsc_unstable())
+ clocksource_tsc.rating = 50;
+
+ init_timer(&verify_tsc_freq_timer);
+ verify_tsc_freq_timer.function = verify_tsc_freq;
+ verify_tsc_freq_timer.expires =
+ jiffies + msecs_to_jiffies(TSC_FREQ_CHECK_INTERVAL);
+ add_timer(&verify_tsc_freq_timer);
+
+ return register_clocksource(&clocksource_tsc);
+ }
+
+ return 0;
+}
+
+module_init(init_tsc_clocksource);
diff --git a/drivers/Makefile b/drivers/Makefile
index 3c5170310bd..fc2d744a4e4 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -74,4 +74,5 @@ obj-$(CONFIG_SGI_SN) += sn/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
obj-$(CONFIG_SUPERH) += sh/
+obj-$(CONFIG_GENERIC_TIME) += clocksource/
obj-$(CONFIG_DMA_ENGINE) += dma/
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
new file mode 100644
index 00000000000..be3511a308c
--- /dev/null
+++ b/drivers/clocksource/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o
+obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
new file mode 100644
index 00000000000..a0e5cde2fa7
--- /dev/null
+++ b/drivers/clocksource/acpi_pm.c
@@ -0,0 +1,177 @@
+/*
+ * linux/drivers/clocksource/acpi_pm.c
+ *
+ * This file contains the ACPI PM based clocksource.
+ *
+ * This code was largely moved from the i386 timer_pm.c file
+ * which was (C) Dominik Brodowski <linux@brodo.de> 2003
+ * and contained the following comments:
+ *
+ * Driver to use the Power Management Timer (PMTMR) available in some
+ * southbridges as primary timing source for the Linux kernel.
+ *
+ * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c,
+ * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4.
+ *
+ * This file is licensed under the GPL v2.
+ */
+
+#include <linux/clocksource.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+/* Number of PMTMR ticks expected during calibration run */
+#define PMTMR_TICKS_PER_SEC 3579545
+
+/*
+ * The I/O port the PMTMR resides at.
+ * The location is detected during setup_arch(),
+ * in arch/i386/acpi/boot.c
+ */
+u32 pmtmr_ioport;
+
+#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */
+
+static inline u32 read_pmtmr(void)
+{
+ /* mask the output to 24 bits */
+ return inl(pmtmr_ioport) & ACPI_PM_MASK;
+}
+
+static cycle_t acpi_pm_read_verified(void)
+{
+ u32 v1 = 0, v2 = 0, v3 = 0;
+
+ /*
+ * It has been reported that because of various broken
+ * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM clock
+ * source is not latched, so you must read it multiple
+ * times to ensure a safe value is read:
+ */
+ do {
+ v1 = read_pmtmr();
+ v2 = read_pmtmr();
+ v3 = read_pmtmr();
+ } while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1)
+ || (v3 > v1 && v3 < v2));
+
+ return (cycle_t)v2;
+}
+
+static cycle_t acpi_pm_read(void)
+{
+ return (cycle_t)read_pmtmr();
+}
+
+static struct clocksource clocksource_acpi_pm = {
+ .name = "acpi_pm",
+ .rating = 200,
+ .read = acpi_pm_read,
+ .mask = (cycle_t)ACPI_PM_MASK,
+ .mult = 0, /*to be caluclated*/
+ .shift = 22,
+ .is_continuous = 1,
+};
+
+
+#ifdef CONFIG_PCI
+static int acpi_pm_good;
+static int __init acpi_pm_good_setup(char *__str)
+{
+ acpi_pm_good = 1;
+ return 1;
+}
+__setup("acpi_pm_good", acpi_pm_good_setup);
+
+static inline void acpi_pm_need_workaround(void)
+{
+ clocksource_acpi_pm.read = acpi_pm_read_verified;
+ clocksource_acpi_pm.rating = 110;
+}
+
+/*
+ * PIIX4 Errata:
+ *
+ * The power management timer may return improper results when read.
+ * Although the timer value settles properly after incrementing,
+ * while incrementing there is a 3 ns window every 69.8 ns where the
+ * timer value is indeterminate (a 4.2% chance that the data will be
+ * incorrect when read). As a result, the ACPI free running count up
+ * timer specification is violated due to erroneous reads.
+ */
+static void __devinit acpi_pm_check_blacklist(struct pci_dev *dev)
+{
+ u8 rev;
+
+ if (acpi_pm_good)
+ return;
+
+ pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+ /* the bug has been fixed in PIIX4M */
+ if (rev < 3) {
+ printk(KERN_WARNING "* Found PM-Timer Bug on the chipset."
+ " Due to workarounds for a bug,\n"
+ "* this clock source is slow. Consider trying"
+ " other clock sources\n");
+
+ acpi_pm_need_workaround();
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3,
+ acpi_pm_check_blacklist);
+
+static void __devinit acpi_pm_check_graylist(struct pci_dev *dev)
+{
+ if (acpi_pm_good)
+ return;
+
+ printk(KERN_WARNING "* The chipset may have PM-Timer Bug. Due to"
+ " workarounds for a bug,\n"
+ "* this clock source is slow. If you are sure your timer"
+ " does not have\n"
+ "* this bug, please use \"acpi_pm_good\" to disable the"
+ " workaround\n");
+
+ acpi_pm_need_workaround();
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
+ acpi_pm_check_graylist);
+#endif
+
+
+static int __init init_acpi_pm_clocksource(void)
+{
+ u32 value1, value2;
+ unsigned int i;
+
+ if (!pmtmr_ioport)
+ return -ENODEV;
+
+ clocksource_acpi_pm.mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC,
+ clocksource_acpi_pm.shift);
+
+ /* "verify" this timing source: */
+ value1 = read_pmtmr();
+ for (i = 0; i < 10000; i++) {
+ value2 = read_pmtmr();
+ if (value2 == value1)
+ continue;
+ if (value2 > value1)
+ goto pm_good;
+ if ((value2 < value1) && ((value2) < 0xFFF))
+ goto pm_good;
+ printk(KERN_INFO "PM-Timer had inconsistent results:"
+ " 0x%#x, 0x%#x - aborting.\n", value1, value2);
+ return -EINVAL;
+ }
+ printk(KERN_INFO "PM-Timer had no reasonable result:"
+ " 0x%#x - aborting.\n", value1);
+ return -ENODEV;
+
+pm_good:
+ return register_clocksource(&clocksource_acpi_pm);
+}
+
+module_init(init_acpi_pm_clocksource);
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
new file mode 100644
index 00000000000..444eb11b9b4
--- /dev/null
+++ b/drivers/clocksource/cyclone.c
@@ -0,0 +1,119 @@
+#include <linux/clocksource.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/timex.h>
+#include <linux/init.h>
+
+#include <asm/pgtable.h>
+#include <asm/io.h>
+
+#include "mach_timer.h"
+
+#define CYCLONE_CBAR_ADDR 0xFEB00CD0 /* base address ptr */
+#define CYCLONE_PMCC_OFFSET 0x51A0 /* offset to control register */
+#define CYCLONE_MPCS_OFFSET 0x51A8 /* offset to select register */
+#define CYCLONE_MPMC_OFFSET 0x51D0 /* offset to count register */
+#define CYCLONE_TIMER_FREQ 99780000 /* 100Mhz, but not really */
+#define CYCLONE_TIMER_MASK 0xFFFFFFFF /* 32 bit mask */
+
+int use_cyclone = 0;
+static void __iomem *cyclone_ptr;
+
+static cycle_t read_cyclone(void)
+{
+ return (cycle_t)readl(cyclone_ptr);
+}
+
+static struct clocksource clocksource_cyclone = {
+ .name = "cyclone",
+ .rating = 250,
+ .read = read_cyclone,
+ .mask = (cycle_t)CYCLONE_TIMER_MASK,
+ .mult = 10,
+ .shift = 0,
+ .is_continuous = 1,
+};
+
+static int __init init_cyclone_clocksource(void)
+{
+ unsigned long base; /* saved value from CBAR */
+ unsigned long offset;
+ u32 __iomem* volatile cyclone_timer; /* Cyclone MPMC0 register */
+ u32 __iomem* reg;
+ int i;
+
+ /* make sure we're on a summit box: */
+ if (!use_cyclone)
+ return -ENODEV;
+
+ printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
+
+ /* find base address: */
+ offset = CYCLONE_CBAR_ADDR;
+ reg = ioremap_nocache(offset, sizeof(reg));
+ if (!reg) {
+ printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n");
+ return -ENODEV;
+ }
+ /* even on 64bit systems, this is only 32bits: */
+ base = readl(reg);
+ if (!base) {
+ printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n");
+ return -ENODEV;
+ }
+ iounmap(reg);
+
+ /* setup PMCC: */
+ offset = base + CYCLONE_PMCC_OFFSET;
+ reg = ioremap_nocache(offset, sizeof(reg));
+ if (!reg) {
+ printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n");
+ return -ENODEV;
+ }
+ writel(0x00000001,reg);
+ iounmap(reg);
+
+ /* setup MPCS: */
+ offset = base + CYCLONE_MPCS_OFFSET;
+ reg = ioremap_nocache(offset, sizeof(reg));
+ if (!reg) {
+ printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n");
+ return -ENODEV;
+ }
+ writel(0x00000001,reg);
+ iounmap(reg);
+
+ /* map in cyclone_timer: */
+ offset = base + CYCLONE_MPMC_OFFSET;
+ cyclone_timer = ioremap_nocache(offset, sizeof(u64));
+ if (!cyclone_timer) {
+ printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n");
+ return -ENODEV;
+ }
+
+ /* quick test to make sure its ticking: */
+ for (i = 0; i < 3; i++){
+ u32 old = readl(cyclone_timer);
+ int stall = 100;
+
+ while (stall--)
+ barrier();
+
+ if (readl(cyclone_timer) == old) {
+ printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n");
+ iounmap(cyclone_timer);
+ cyclone_timer = NULL;
+ return -ENODEV;
+ }
+ }
+ cyclone_ptr = cyclone_timer;
+
+ /* sort out mult/shift values: */
+ clocksource_cyclone.shift = 22;
+ clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ,
+ clocksource_cyclone.shift);
+
+ return register_clocksource(&clocksource_cyclone);
+}
+
+module_init(init_cyclone_clocksource);
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 4288bfa12c3..a9f387ea83b 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -174,7 +174,7 @@ EXPORT_SYMBOL(register_clocksource);
* reselect_clocksource - Rescan list for next clocksource
*
* A quick helper function to be used if a clocksource changes its
- * rating. Forces the clocksource list to be re-scaned for the best
+ * rating. Forces the clocksource list to be re-scanned for the best
* clocksource.
*/
void reselect_clocksource(void)
@@ -336,8 +336,13 @@ __setup("clocksource=", boot_override_clocksource);
*/
static int __init boot_override_clock(char* str)
{
- printk("Warning! clock= boot option is deprecated.\n");
-
+ if (!strcmp(str, "pmtmr")) {
+ printk("Warning: clock=pmtmr is deprecated. "
+ "Use clocksource=acpi_pm.\n");
+ return boot_override_clocksource("acpi_pm");
+ }
+ printk("Warning! clock= boot option is deprecated. "
+ "Use clocksource=xyz\n");
return boot_override_clocksource(str);
}