diff options
113 files changed, 3007 insertions, 1360 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e7848a0d99e..3e69c1c4f50 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1948,8 +1948,12 @@ and is between 256 and 4096 characters. It is defined in the file IRQ routing is enabled. noacpi [X86] Do not use ACPI for IRQ routing or for PCI scanning. - use_crs [X86] Use _CRS for PCI resource - allocation. + use_crs [X86] Use PCI host bridge window information + from ACPI. On BIOSes from 2008 or later, this + is enabled by default. If you need to use this, + please report a bug. + nocrs [X86] Ignore PCI host bridge windows from ACPI. + If you need to use this, please report a bug. routeirq Do IRQ routing for all PCI devices. This is normally done in pci_enable_device(), so this option is a temporary workaround @@ -1998,6 +2002,14 @@ and is between 256 and 4096 characters. It is defined in the file force Enable ASPM even on devices that claim not to support it. WARNING: Forcing ASPM on may cause system lockups. + pcie_pme= [PCIE,PM] Native PCIe PME signaling options: + off Do not use native PCIe PME signaling. + force Use native PCIe PME signaling even if the BIOS refuses + to allow the kernel to control the relevant PCIe config + registers. + nomsi Do not use MSI for native PCIe PME signaling (this makes + all PCIe root ports use INTx for everything). + pcmv= [HW,PCMCIA] BadgePAD 4 pd. [PARIDE] diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index a91ba28999b..c9ab94ee1ca 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -126,8 +126,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final); #define MB (1024*KB) #define GB (1024*MB) -void -pcibios_align_resource(void *data, struct resource *res, +resource_size_t +pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; @@ -184,7 +184,7 @@ pcibios_align_resource(void *data, struct resource *res, } } - res->start = start; + return start; } #undef KB #undef MB diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 809681900ec..bd397e0b663 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -616,15 +616,17 @@ char * __init pcibios_setup(char *str) * but we want to try to avoid allocating at 0x2900-0x2bff * which might be mirrored at 0x0100-0x03ff.. */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) { resource_size_t start = res->start; if (res->flags & IORESOURCE_IO && start & 0x300) start = (start + 0x3ff) & ~0x3ff; - res->start = (start + align - 1) & ~(align - 1); + start = (start + align - 1) & ~(align - 1); + + return start; } /** diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c index 77ee319193c..d4b9c36ddc0 100644 --- a/arch/cris/arch-v32/drivers/pci/bios.c +++ b/arch/cris/arch-v32/drivers/pci/bios.c @@ -41,18 +41,16 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, return 0; } -void -pcibios_align_resource(void *data, struct resource *res, +resource_size_t +pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { - if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; + resource_size_t start = res->start; - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } + if ((res->flags & IORESOURCE_IO) && (start & 0x300)) + start = (start + 0x3ff) & ~0x3ff; + + return start } int pcibios_enable_resources(struct pci_dev *dev, int mask) diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c index 566bdeb499d..1ed15d7fea2 100644 --- a/arch/frv/mb93090-mb00/pci-frv.c +++ b/arch/frv/mb93090-mb00/pci-frv.c @@ -32,18 +32,16 @@ * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void -pcibios_align_resource(void *data, struct resource *res, +resource_size_t +pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { - if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; + resource_size_t start = res->start; - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } + if ((res->flags & IORESOURCE_IO) && (start & 0x300)) + start = (start + 0x3ff) & ~0x3ff; + + return start } diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h index e97b255d97b..93997bd5edc 100644 --- a/arch/ia64/include/asm/acpi.h +++ b/arch/ia64/include/asm/acpi.h @@ -98,6 +98,7 @@ ia64_acpi_release_global_lock (unsigned int *lock) #endif #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */ static inline void disable_acpi(void) { } +static inline void pci_acpi_crs_quirks(void) { } const char *acpi_get_sysname (void); int acpi_request_vector (u32 int_type); diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index df639db779f..64aff520b89 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -320,9 +320,9 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data) static void __devinit pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl) { - int i, j; + int i; - j = 0; + pci_bus_remove_resources(bus); for (i = 0; i < ctrl->windows; i++) { struct resource *res = &ctrl->window[i].resource; /* HP's firmware has a hack to work around a Windows bug. @@ -330,13 +330,7 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl) if ((res->flags & IORESOURCE_MEM) && (res->end - res->start < 16)) continue; - if (j >= PCI_BUS_NUM_RESOURCES) { - dev_warn(&bus->dev, - "ignoring host bridge window %pR (no space)\n", - res); - continue; - } - bus->resource[j++] = res; + pci_bus_add_resource(bus, res, 0); } } @@ -452,13 +446,12 @@ EXPORT_SYMBOL(pcibios_bus_to_resource); static int __devinit is_valid_resource(struct pci_dev *dev, int idx) { unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM; - struct resource *devr = &dev->resource[idx]; + struct resource *devr = &dev->resource[idx], *busr; if (!dev->bus) return 0; - for (i=0; i<PCI_BUS_NUM_RESOURCES; i++) { - struct resource *busr = dev->bus->resource[i]; + pci_bus_for_each_resource(dev->bus, busr, i) { if (!busr || ((busr->flags ^ devr->flags) & type_mask)) continue; if ((devr->start) && (devr->start >= busr->start) && @@ -547,10 +540,11 @@ pcibios_disable_device (struct pci_dev *dev) acpi_pci_irq_disable(dev); } -void -pcibios_align_resource (void *data, struct resource *res, +resource_size_t +pcibios_align_resource (void *data, const struct resource *res, resource_size_t size, resource_size_t align) { + return res->start; } /* diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 9a11c222689..f87f5e188fa 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -49,8 +49,8 @@ static int pci_initialized; * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void -pcibios_align_resource(void *data, struct resource *res, +resource_size_t +pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; @@ -73,7 +73,7 @@ pcibios_align_resource(void *data, struct resource *res, start = PCIBIOS_MIN_MEM + hose->mem_resource->start; } - res->start = start; + return start; } static void __devinit pcibios_scanbus(struct pci_controller *hose) diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c index 678388fd34b..fd22597edb6 100644 --- a/arch/mips/pmc-sierra/yosemite/ht.c +++ b/arch/mips/pmc-sierra/yosemite/ht.c @@ -345,14 +345,13 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pcibios_enable_resources(dev); } -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; + resource_size_t start = res->start; if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - /* We need to avoid collisions with `mirrored' VGA ports and other strange ISA hardware, so we always want the addresses kilobyte aligned. */ @@ -363,8 +362,9 @@ void pcibios_align_resource(void *data, struct resource *res, } start = (start + 1024 - 1) & ~(1024 - 1); - res->start = start; } + + return start; } struct pci_ops titan_pci_ops = { diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c index 78cd134ddf7..d6119b879a9 100644 --- a/arch/mn10300/unit-asb2305/pci-asb2305.c +++ b/arch/mn10300/unit-asb2305/pci-asb2305.c @@ -31,9 +31,11 @@ * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) { + resource_size_t start = res->start; + #if 0 struct pci_dev *dev = data; @@ -47,14 +49,10 @@ void pcibios_align_resource(void *data, struct resource *res, ); #endif - if (res->flags & IORESOURCE_IO) { - unsigned long start = res->start; + if ((res->flags & IORESOURCE_IO) && (start & 0x300)) + start = (start + 0x3ff) & ~0x3ff; - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } + return start; } diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 2cb7e75ba1c..6d8720a0a59 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -331,12 +331,10 @@ static int __init pci_check_direct(void) static int __devinit is_valid_resource(struct pci_dev *dev, int idx) { unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM; - struct resource *devr = &dev->resource[idx]; + struct resource *devr = &dev->resource[idx], *busr; if (dev->bus) { - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *busr = dev->bus->resource[i]; - + pci_bus_for_each_resource(dev->bus, busr, i) { if (!busr || (busr->flags ^ devr->flags) & type_mask) continue; diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index 9e74bfe071d..38372e7cbb8 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -257,10 +257,10 @@ EXPORT_SYMBOL(pcibios_bus_to_resource); * Since we are just checking candidates, don't use any fields other * than res->start. */ -void pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t alignment) { - resource_size_t mask, align; + resource_size_t mask, align, start = res->start; DBG_RES("pcibios_align_resource(%s, (%p) [%lx,%lx]/%x, 0x%lx, 0x%lx)\n", pci_name(((struct pci_dev *) data)), @@ -272,10 +272,10 @@ void pcibios_align_resource(void *data, struct resource *res, /* Align to largest of MIN or input size */ mask = max(alignment, align) - 1; - res->start += mask; - res->start &= ~mask; + start += mask; + start &= ~mask; - /* The caller updates the end field, we don't. */ + return start; } diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index cadbed679fb..2597f9545d8 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1047,10 +1047,8 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) struct pci_dev *dev = bus->self; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { - if ((res = bus->resource[i]) == NULL) - continue; - if (!res->flags) + pci_bus_for_each_resource(bus, res, i) { + if (!res || !res->flags) continue; if (i >= 3 && bus->self->transparent) continue; @@ -1181,21 +1179,20 @@ static int skip_isa_ioresource_align(struct pci_dev *dev) * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; + resource_size_t start = res->start; if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - if (skip_isa_ioresource_align(dev)) - return; - if (start & 0x300) { + return start; + if (start & 0x300) start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } } + + return start; } EXPORT_SYMBOL(pcibios_align_resource); @@ -1278,9 +1275,8 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus) pr_debug("PCI: Allocating bus resources for %04x:%02x...\n", pci_domain_nr(bus), bus->number); - for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { - if ((res = bus->resource[i]) == NULL || !res->flags - || res->start > res->end || res->parent) + pci_bus_for_each_resource(bus, res, i) { + if (!res || !res->flags || res->start > res->end || res->parent) continue; if (bus->parent == NULL) pr = (res->flags & IORESOURCE_IO) ? diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c index fd23a1d4b39..8b0c2082a78 100644 --- a/arch/powerpc/platforms/fsl_uli1575.c +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -222,6 +222,7 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev) int i; u8 *dummy; struct pci_bus *bus = dev->bus; + struct resource *res; resource_size_t end = 0; for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCES+3; i++) { @@ -230,13 +231,12 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev) end = pci_resource_end(dev, i); } - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - if ((bus->resource[i]) && - (bus->resource[i]->flags & IORESOURCE_MEM)) { - if (bus->resource[i]->end == end) - dummy = ioremap(bus->resource[i]->start, 0x4); + pci_bus_for_each_resource(bus, res, i) { + if (res && res->flags & IORESOURCE_MEM) { + if (res->end == end) + dummy = ioremap(res->start, 0x4); else - dummy = ioremap(bus->resource[i]->end - 3, 0x4); + dummy = ioremap(res->end - 3, 0x4); if (dummy) { in_8(dummy); iounmap(dummy); diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index c481df63902..96213fd172c 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -148,8 +148,8 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) * addresses to be allocated in the 0x000-0x0ff region * modulo 0x400. */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; struct pci_channel *chan = dev->sysdata; @@ -171,7 +171,7 @@ void pcibios_align_resource(void *data, struct resource *res, start = PCIBIOS_MIN_MEM + chan->mem_resource->start; } - res->start = start; + return start; } void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index 592b03d8516..37b66c60abe 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -722,9 +722,10 @@ void pcibios_update_irq(struct pci_dev *pdev, int irq) { } -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) { + return res->start; } int pcibios_enable_device(struct pci_dev *dev, int mask) diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index 4e2724ec2bb..75e88c00bca 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -768,9 +768,10 @@ char * __devinit pcibios_setup(char *str) return str; } -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) { + return res->start; } int pcibios_enable_device(struct pci_dev *pdev, int mask) diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index b4bf9a942ed..05b58ccb2e8 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -29,6 +29,7 @@ #define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000 #define PCI_HAS_IO_ECS 0x40000 #define PCI_NOASSIGN_ROMS 0x80000 +#define PCI_ROOT_NO_CRS 0x100000 extern unsigned int pci_probe; extern unsigned long pirq_table_addr; diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 959e548a703..5f11ff6f538 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -15,6 +15,51 @@ struct pci_root_info { int busnum; }; +static bool pci_use_crs = true; + +static int __init set_use_crs(const struct dmi_system_id *id) +{ + pci_use_crs = true; + return 0; +} + +static const struct dmi_system_id pci_use_crs_table[] __initconst = { + /* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */ + { + .callback = set_use_crs, + .ident = "IBM System x3800", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "x3800"), + }, + }, + {} +}; + +void __init pci_acpi_crs_quirks(void) +{ + int year; + + if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008) + pci_use_crs = false; + + dmi_check_system(pci_use_crs_table); + + /* + * If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that + * takes precedence over anything we figured out above. + */ + if (pci_probe & PCI_ROOT_NO_CRS) + pci_use_crs = false; + else if (pci_probe & PCI_USE__CRS) + pci_use_crs = true; + + printk(KERN_INFO "PCI: %s host bridge windows from ACPI; " + "if necessary, use \"pci=%s\" and report a bug\n", + pci_use_crs ? "Using" : "Ignoring", + pci_use_crs ? "nocrs" : "use_crs"); +} + static acpi_status resource_to_addr(struct acpi_resource *resource, struct acpi_resource_address64 *addr) @@ -45,20 +90,6 @@ count_resource(struct acpi_resource *acpi_res, void *data) return AE_OK; } -static int -bus_has_transparent_bridge(struct pci_bus *bus) -{ - struct pci_dev *dev; - - list_for_each_entry(dev, &bus->devices, bus_list) { - u16 class = dev->class >> 8; - - if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) - return true; - } - return false; -} - static void align_resource(struct acpi_device *bridge, struct resource *res) { @@ -92,12 +123,8 @@ setup_resource(struct acpi_resource *acpi_res, void *data) acpi_status status; unsigned long flags; struct resource *root; - int max_root_bus_resources = PCI_BUS_NUM_RESOURCES; u64 start, end; - if (bus_has_transparent_bridge(info->bus)) - max_root_bus_resources -= 3; - status = resource_to_addr(acpi_res, &addr); if (!ACPI_SUCCESS(status)) return AE_OK; @@ -115,15 +142,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data) start = addr.minimum + addr.translation_offset; end = start + addr.address_length - 1; - if (info->res_num >= max_root_bus_resources) { - if (pci_probe & PCI_USE__CRS) - printk(KERN_WARNING "PCI: Failed to allocate " - "0x%lx-0x%lx from %s for %s due to _CRS " - "returning more than %d resource descriptors\n", - (unsigned long) start, (unsigned long) end, - root->name, info->name, max_root_bus_resources); - return AE_OK; - } res = &info->res[info->res_num]; res->name = info->name; @@ -133,7 +151,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data) res->child = NULL; align_resource(info->bridge, res); - if (!(pci_probe & PCI_USE__CRS)) { + if (!pci_use_crs) { dev_printk(KERN_DEBUG, &info->bridge->dev, "host bridge window %pR (ignored)\n", res); return AE_OK; @@ -143,7 +161,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data) dev_err(&info->bridge->dev, "can't allocate host bridge window %pR\n", res); } else { - info->bus->resource[info->res_num] = res; + pci_bus_add_resource(info->bus, res, 0); info->res_num++; if (addr.translation_offset) dev_info(&info->bridge->dev, "host bridge window %pR " @@ -164,10 +182,8 @@ get_current_resources(struct acpi_device *device, int busnum, struct pci_root_info info; size_t size; - if (!(pci_probe & PCI_USE__CRS)) - dev_info(&device->dev, - "ignoring host bridge windows from ACPI; " - "boot with \"pci=use_crs\" to use them\n"); + if (pci_use_crs) + pci_bus_remove_resources(bus); info.bridge = device; info.bus = bus; diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c index f939d603adf..12d54ff3654 100644 --- a/arch/x86/pci/bus_numa.c +++ b/arch/x86/pci/bus_numa.c @@ -36,13 +36,14 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n", b->number); + pci_bus_remove_resources(b); info = &pci_root_info[i]; for (j = 0; j < info->res_num; j++) { struct resource *res; struct resource *root; res = &info->res[j]; - b->resource[j] = res; + pci_bus_add_resource(b, res, 0); if (res->flags & IORESOURCE_IO) root = &ioport_resource; else diff --git a/arch/x86/pci/bus_numa.h b/arch/x86/pci/bus_numa.h index adbc23fe82a..731b64ee8d8 100644 --- a/arch/x86/pci/bus_numa.h +++ b/arch/x86/pci/bus_numa.h @@ -2,8 +2,7 @@ /* * sub bus (transparent) will use entres from 3 to store extra from - * root, so need to make sure we have enough slot there, Should we - * increase PCI_BUS_NUM_RESOURCES? + * root, so need to make sure we have enough slot there. */ #define RES_NUM 16 struct pci_root_info { diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index d2552c68e94..3736176acaa 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -520,6 +520,9 @@ char * __devinit pcibios_setup(char *str) } else if (!strcmp(str, "use_crs")) { pci_probe |= PCI_USE__CRS; return NULL; + } else if (!strcmp(str, "nocrs")) { + pci_probe |= PCI_ROOT_NO_CRS; + return NULL; } else if (!strcmp(str, "earlydump")) { pci_early_dump_regs = 1; return NULL; diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 5dc9e8c63fc..5a8fbf8d4ca 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -60,22 +60,20 @@ skip_isa_ioresource_align(struct pci_dev *dev) { * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void -pcibios_align_resource(void *data, struct resource *res, +resource_size_t +pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; + resource_size_t start = res->start; if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - if (skip_isa_ioresource_align(dev)) - return; - if (start & 0x300) { + return start; + if (start & 0x300) start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } } + return start; } EXPORT_SYMBOL(pcibios_align_resource); diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 0696d506c4a..b02f6d8ac92 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -590,6 +590,8 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route case PCI_DEVICE_ID_INTEL_ICH10_1: case PCI_DEVICE_ID_INTEL_ICH10_2: case PCI_DEVICE_ID_INTEL_ICH10_3: + case PCI_DEVICE_ID_INTEL_CPT_LPC1: + case PCI_DEVICE_ID_INTEL_CPT_LPC2: r->name = "PIIX/ICH"; r->get = pirq_piix_get; r->set = pirq_piix_set; diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index b19d1e54201..8f3f9a50b1e 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -303,22 +303,17 @@ static void __init pci_mmcfg_check_end_bus_number(void) { struct pci_mmcfg_region *cfg, *cfgx; - /* last one*/ - cfg = list_entry(pci_mmcfg_list.prev, typeof(*cfg), list); - if (cfg) - if (cfg->end_bus < cfg->start_bus) - cfg->end_bus = 255; - - if (list_is_singular(&pci_mmcfg_list)) - return; - - /* don't overlap please */ + /* Fixup overlaps */ list_for_each_entry(cfg, &pci_mmcfg_list, list) { if (cfg->end_bus < cfg->start_bus) cfg->end_bus = 255; + /* Don't access the list head ! */ + if (cfg->list.next == &pci_mmcfg_list) + break; + cfgx = list_entry(cfg->list.next, typeof(*cfg), list); - if (cfg != cfgx && cfg->end_bus >= cfgx->start_bus) + if (cfg->end_bus >= cfgx->start_bus) cfg->end_bus = cfgx->start_bus - 1; } } diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c index b7c073484e0..cd102693120 100644 --- a/arch/xtensa/kernel/pci.c +++ b/arch/xtensa/kernel/pci.c @@ -69,26 +69,25 @@ static int pci_bus_count; * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void -pcibios_align_resource(void *data, struct resource *res, resource_size_t size, - resource_size_t align) +resource_size_t +pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; + resource_size_t start = res->start; if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - if (size > 0x100) { printk(KERN_ERR "PCI: I/O Region %s/%d too large" " (%ld bytes)\n", pci_name(dev), dev->resource - res, size); } - if (start & 0x300) { + if (start & 0x300) start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } } + + return start; } int diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index 0bba148a2c6..4ced54f7a5d 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -76,12 +76,9 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node *node, * evgpe - GPE handling and dispatch */ acpi_status -acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info, - u8 type); +acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info); -acpi_status -acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info, - u8 write_to_hardware); +acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info); acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); @@ -122,9 +119,6 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list); acpi_status -acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type); - -acpi_status acpi_ev_check_for_wake_only_gpe(struct acpi_gpe_event_info *gpe_event_info); acpi_status acpi_ev_gpe_initialize(void); diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 81e64f47867..13cb80caacd 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -426,6 +426,8 @@ struct acpi_gpe_event_info { struct acpi_gpe_register_info *register_info; /* Backpointer to register info */ u8 flags; /* Misc info about this GPE */ u8 gpe_number; /* This GPE */ + u8 runtime_count; + u8 wakeup_count; }; /* Information about a GPE register pair, one per each status/enable pair in an array */ diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h index 64062b1be3e..07f6e2ea2ee 100644 --- a/drivers/acpi/acpica/acobject.h +++ b/drivers/acpi/acpica/acobject.h @@ -287,8 +287,10 @@ struct acpi_object_buffer_field { struct acpi_object_notify_handler { ACPI_OBJECT_COMMON_HEADER struct acpi_namespace_node *node; /* Parent device */ + u32 handler_type; acpi_notify_handler handler; void *context; + struct acpi_object_notify_handler *next; }; struct acpi_object_addr_handler { diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index afacf4416c7..0b453467a5a 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -54,54 +54,9 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context); /******************************************************************************* * - * FUNCTION: acpi_ev_set_gpe_type - * - * PARAMETERS: gpe_event_info - GPE to set - * Type - New type - * - * RETURN: Status - * - * DESCRIPTION: Sets the new type for the GPE (wake, run, or wake/run) - * - ******************************************************************************/ - -acpi_status -acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(ev_set_gpe_type); - - /* Validate type and update register enable masks */ - - switch (type) { - case ACPI_GPE_TYPE_WAKE: - case ACPI_GPE_TYPE_RUNTIME: - case ACPI_GPE_TYPE_WAKE_RUN: - break; - - default: - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - /* Disable the GPE if currently enabled */ - - status = acpi_ev_disable_gpe(gpe_event_info); - - /* Clear the type bits and insert the new Type */ - - gpe_event_info->flags &= ~ACPI_GPE_TYPE_MASK; - gpe_event_info->flags |= type; - return_ACPI_STATUS(status); -} - -/******************************************************************************* - * * FUNCTION: acpi_ev_update_gpe_enable_masks * * PARAMETERS: gpe_event_info - GPE to update - * Type - What to do: ACPI_GPE_DISABLE or - * ACPI_GPE_ENABLE * * RETURN: Status * @@ -110,8 +65,7 @@ acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type) ******************************************************************************/ acpi_status -acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info, - u8 type) +acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info) { struct acpi_gpe_register_info *gpe_register_info; u8 register_bit; @@ -127,37 +81,14 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info, (1 << (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number)); - /* 1) Disable case. Simply clear all enable bits */ - - if (type == ACPI_GPE_DISABLE) { - ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, - register_bit); - ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit); - return_ACPI_STATUS(AE_OK); - } - - /* 2) Enable case. Set/Clear the appropriate enable bits */ + ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, register_bit); + ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit); - switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) { - case ACPI_GPE_TYPE_WAKE: - ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit); - ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit); - break; - - case ACPI_GPE_TYPE_RUNTIME: - ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, - register_bit); + if (gpe_event_info->runtime_count) ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit); - break; - case ACPI_GPE_TYPE_WAKE_RUN: + if (gpe_event_info->wakeup_count) ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit); - ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit); - break; - - default: - return_ACPI_STATUS(AE_BAD_PARAMETER); - } return_ACPI_STATUS(AE_OK); } @@ -167,8 +98,6 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info, * FUNCTION: acpi_ev_enable_gpe * * PARAMETERS: gpe_event_info - GPE to enable - * write_to_hardware - Enable now, or just mark data structs - * (WAKE GPEs should be deferred) * * RETURN: Status * @@ -176,9 +105,7 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info, * ******************************************************************************/ -acpi_status -acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info, - u8 write_to_hardware) +acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) { acpi_status status; @@ -186,47 +113,20 @@ acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info, /* Make sure HW enable masks are updated */ - status = - acpi_ev_update_gpe_enable_masks(gpe_event_info, ACPI_GPE_ENABLE); - if (ACPI_FAILURE(status)) { + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); + if (ACPI_FAILURE(status)) return_ACPI_STATUS(status); - } /* Mark wake-enabled or HW enable, or both */ - switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) { - case ACPI_GPE_TYPE_WAKE: - - ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED); - break; - - case ACPI_GPE_TYPE_WAKE_RUN: - - ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED); - - /*lint -fallthrough */ - - case ACPI_GPE_TYPE_RUNTIME: - - ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED); - - if (write_to_hardware) { - - /* Clear the GPE (of stale events), then enable it */ - - status = acpi_hw_clear_gpe(gpe_event_info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Enable the requested runtime GPE */ - - status = acpi_hw_write_gpe_enable_reg(gpe_event_info); - } - break; + if (gpe_event_info->runtime_count) { + /* Clear the GPE (of stale events), then enable it */ + status = acpi_hw_clear_gpe(gpe_event_info); + if (ACPI_FAILURE(status)) + return_ACPI_STATUS(status); - default: - return_ACPI_STATUS(AE_BAD_PARAMETER); + /* Enable the requested runtime GPE */ + status = acpi_hw_write_gpe_enable_reg(gpe_event_info); } return_ACPI_STATUS(AE_OK); @@ -252,34 +152,9 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) /* Make sure HW enable masks are updated */ - status = - acpi_ev_update_gpe_enable_masks(gpe_event_info, ACPI_GPE_DISABLE); - if (ACPI_FAILURE(status)) { + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); + if (ACPI_FAILURE(status)) return_ACPI_STATUS(status); - } - - /* Clear the appropriate enabled flags for this GPE */ - - switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) { - case ACPI_GPE_TYPE_WAKE: - ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED); - break; - - case ACPI_GPE_TYPE_WAKE_RUN: - ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED); - - /* fallthrough */ - - case ACPI_GPE_TYPE_RUNTIME: - - /* Disable the requested runtime GPE */ - - ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED); - break; - - default: - break; - } /* * Even if we don't know the GPE type, make sure that we always @@ -521,7 +396,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) /* Set the GPE flags for return to enabled state */ - (void)acpi_ev_enable_gpe(gpe_event_info, FALSE); + (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); /* * Take a snapshot of the GPE info for this level - we copy the info to diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index 24792090018..3d4c4aca11c 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -258,7 +258,6 @@ acpi_ev_save_method_info(acpi_handle obj_handle, u32 gpe_number; char name[ACPI_NAME_SIZE + 1]; u8 type; - acpi_status status; ACPI_FUNCTION_TRACE(ev_save_method_info); @@ -325,26 +324,20 @@ acpi_ev_save_method_info(acpi_handle obj_handle, /* * Now we can add this information to the gpe_event_info block for use - * during dispatch of this GPE. Default type is RUNTIME, although this may - * change when the _PRW methods are executed later. + * during dispatch of this GPE. */ gpe_event_info = &gpe_block->event_info[gpe_number - gpe_block->block_base_number]; - gpe_event_info->flags = (u8) - (type | ACPI_GPE_DISPATCH_METHOD | ACPI_GPE_TYPE_RUNTIME); + gpe_event_info->flags = (u8) (type | ACPI_GPE_DISPATCH_METHOD); gpe_event_info->dispatch.method_node = (struct acpi_namespace_node *)obj_handle; - /* Update enable mask, but don't enable the HW GPE as of yet */ - - status = acpi_ev_enable_gpe(gpe_event_info, FALSE); - ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "Registered GPE method %s as GPE number 0x%.2X\n", name, gpe_number)); - return_ACPI_STATUS(status); + return_ACPI_STATUS(AE_OK); } /******************************************************************************* @@ -454,20 +447,7 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, gpe_block-> block_base_number]; - /* Mark GPE for WAKE-ONLY but WAKE_DISABLED */ - - gpe_event_info->flags &= - ~(ACPI_GPE_WAKE_ENABLED | ACPI_GPE_RUN_ENABLED); - - status = - acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE); - if (ACPI_FAILURE(status)) { - goto cleanup; - } - - status = - acpi_ev_update_gpe_enable_masks(gpe_event_info, - ACPI_GPE_DISABLE); + gpe_event_info->flags |= ACPI_GPE_CAN_WAKE; } cleanup: @@ -989,7 +969,6 @@ acpi_status acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, struct acpi_gpe_block_info *gpe_block) { - acpi_status status; struct acpi_gpe_event_info *gpe_event_info; struct acpi_gpe_walk_info gpe_info; u32 wake_gpe_count; @@ -1019,42 +998,50 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, gpe_info.gpe_block = gpe_block; gpe_info.gpe_device = gpe_device; - status = - acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK, acpi_ev_match_prw_and_gpe, NULL, &gpe_info, NULL); } /* - * Enable all GPEs in this block that have these attributes: - * 1) are "runtime" or "run/wake" GPEs, and - * 2) have a corresponding _Lxx or _Exx method - * - * Any other GPEs within this block must be enabled via the - * acpi_enable_gpe() external interface. + * Enable all GPEs that have a corresponding method and aren't + * capable of generating wakeups. Any other GPEs within this block + * must be enabled via the acpi_enable_gpe() interface. */ wake_gpe_count = 0; gpe_enabled_count = 0; + if (gpe_device == acpi_gbl_fadt_gpe_device) + gpe_device = NULL; for (i = 0; i < gpe_block->register_count; i++) { - for (j = 0; j < 8; j++) { + for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) { + acpi_status status; + acpi_size gpe_index; + int gpe_number; /* Get the info block for this particular GPE */ + gpe_index = (acpi_size)i * ACPI_GPE_REGISTER_WIDTH + j; + gpe_event_info = &gpe_block->event_info[gpe_index]; - gpe_event_info = &gpe_block->event_info[((acpi_size) i * - ACPI_GPE_REGISTER_WIDTH) - + j]; - - if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == - ACPI_GPE_DISPATCH_METHOD) && - (gpe_event_info->flags & ACPI_GPE_TYPE_RUNTIME)) { - gpe_enabled_count++; - } - - if (gpe_event_info->flags & ACPI_GPE_TYPE_WAKE) { + if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) { wake_gpe_count++; + if (acpi_gbl_leave_wake_gpes_disabled) + continue; } + + if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD)) + continue; + + gpe_number = gpe_index + gpe_block->block_base_number; + status = acpi_enable_gpe(gpe_device, gpe_number, + ACPI_GPE_TYPE_RUNTIME); + if (ACPI_FAILURE(status)) + ACPI_ERROR((AE_INFO, + "Failed to enable GPE %02X\n", + gpe_number)); + else + gpe_enabled_count++; } } @@ -1062,15 +1049,7 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, "Found %u Wake, Enabled %u Runtime GPEs in this block\n", wake_gpe_count, gpe_enabled_count)); - /* Enable all valid runtime GPEs found above */ - - status = acpi_hw_enable_runtime_gpe_block(NULL, gpe_block, NULL); - if (ACPI_FAILURE(status)) { - ACPI_ERROR((AE_INFO, "Could not enable GPEs in GpeBlock %p", - gpe_block)); - } - - return_ACPI_STATUS(status); + return_ACPI_STATUS(AE_OK); } /******************************************************************************* diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index ce224e1eaa8..8f0fac6c436 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -259,9 +259,15 @@ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context) handler_obj = notify_info->notify.handler_obj; if (handler_obj) { - handler_obj->notify.handler(notify_info->notify.node, - notify_info->notify.value, - handler_obj->notify.context); + struct acpi_object_notify_handler *notifier; + + notifier = &handler_obj->notify; + while (notifier) { + notifier->handler(notify_info->notify.node, + notify_info->notify.value, + notifier->context); + notifier = notifier->next; + } } /* All done with the info object */ diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index 2fe0809d4eb..474e2cab603 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -218,6 +218,72 @@ ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler) /******************************************************************************* * + * FUNCTION: acpi_populate_handler_object + * + * PARAMETERS: handler_obj - Handler object to populate + * handler_type - The type of handler: + * ACPI_SYSTEM_NOTIFY: system_handler (00-7f) + * ACPI_DEVICE_NOTIFY: driver_handler (80-ff) + * ACPI_ALL_NOTIFY: both system and device + * handler - Address of the handler + * context - Value passed to the handler on each GPE + * next - Address of a handler object to link to + * + * RETURN: None + * + * DESCRIPTION: Populate a handler object. + * + ******************************************************************************/ +static void +acpi_populate_handler_object(struct acpi_object_notify_handler *handler_obj, + u32 handler_type, + acpi_notify_handler handler, void *context, + struct acpi_object_notify_handler *next) +{ + handler_obj->handler_type = handler_type; + handler_obj->handler = handler; + handler_obj->context = context; + handler_obj->next = next; +} + +/******************************************************************************* + * + * FUNCTION: acpi_add_handler_object + * + * PARAMETERS: parent_obj - Parent of the new object + * handler - Address of the handler + * context - Value passed to the handler on each GPE + * + * RETURN: Status + * + * DESCRIPTION: Create a new handler object and populate it. + * + ******************************************************************************/ +static acpi_status +acpi_add_handler_object(struct acpi_object_notify_handler *parent_obj, + acpi_notify_handler handler, void *context) +{ + struct acpi_object_notify_handler *handler_obj; + + /* The parent must not be a defice notify handler object. */ + if (parent_obj->handler_type & ACPI_DEVICE_NOTIFY) + return AE_BAD_PARAMETER; + + handler_obj = ACPI_ALLOCATE_ZEROED(sizeof(*handler_obj)); + if (!handler_obj) + return AE_NO_MEMORY; + + acpi_populate_handler_object(handler_obj, + ACPI_SYSTEM_NOTIFY, + handler, context, + parent_obj->next); + parent_obj->next = handler_obj; + + return AE_OK; +} + +/******************************************************************************* + * * FUNCTION: acpi_install_notify_handler * * PARAMETERS: Device - The device for which notifies will be handled @@ -316,15 +382,32 @@ acpi_install_notify_handler(acpi_handle device, obj_desc = acpi_ns_get_attached_object(node); if (obj_desc) { - /* Object exists - make sure there's no handler */ + /* Object exists. */ - if (((handler_type & ACPI_SYSTEM_NOTIFY) && - obj_desc->common_notify.system_notify) || - ((handler_type & ACPI_DEVICE_NOTIFY) && - obj_desc->common_notify.device_notify)) { + /* For a device notify, make sure there's no handler. */ + if ((handler_type & ACPI_DEVICE_NOTIFY) && + obj_desc->common_notify.device_notify) { status = AE_ALREADY_EXISTS; goto unlock_and_exit; } + + /* System notifies may have more handlers installed. */ + notify_obj = obj_desc->common_notify.system_notify; + + if ((handler_type & ACPI_SYSTEM_NOTIFY) && notify_obj) { + struct acpi_object_notify_handler *parent_obj; + + if (handler_type & ACPI_DEVICE_NOTIFY) { + status = AE_ALREADY_EXISTS; + goto unlock_and_exit; + } + + parent_obj = ¬ify_obj->notify; + status = acpi_add_handler_object(parent_obj, + handler, + context); + goto unlock_and_exit; + } } else { /* Create a new object */ @@ -356,9 +439,10 @@ acpi_install_notify_handler(acpi_handle device, goto unlock_and_exit; } - notify_obj->notify.node = node; - notify_obj->notify.handler = handler; - notify_obj->notify.context = context; + acpi_populate_handler_object(¬ify_obj->notify, + handler_type, + handler, context, + NULL); if (handler_type & ACPI_SYSTEM_NOTIFY) { obj_desc->common_notify.system_notify = notify_obj; @@ -418,6 +502,10 @@ acpi_remove_notify_handler(acpi_handle device, goto exit; } + + /* Make sure all deferred tasks are completed */ + acpi_os_wait_events_complete(NULL); + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); if (ACPI_FAILURE(status)) { goto exit; @@ -445,15 +533,6 @@ acpi_remove_notify_handler(acpi_handle device, goto unlock_and_exit; } - /* Make sure all deferred tasks are completed */ - - (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); - acpi_os_wait_events_complete(NULL); - status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); - if (ACPI_FAILURE(status)) { - goto exit; - } - if (handler_type & ACPI_SYSTEM_NOTIFY) { acpi_gbl_system_notify.node = NULL; acpi_gbl_system_notify.handler = NULL; @@ -488,28 +567,60 @@ acpi_remove_notify_handler(acpi_handle device, /* Object exists - make sure there's an existing handler */ if (handler_type & ACPI_SYSTEM_NOTIFY) { + struct acpi_object_notify_handler *handler_obj; + struct acpi_object_notify_handler *parent_obj; + notify_obj = obj_desc->common_notify.system_notify; if (!notify_obj) { status = AE_NOT_EXIST; goto unlock_and_exit; } - if (notify_obj->notify.handler != handler) { + handler_obj = ¬ify_obj->notify; + parent_obj = NULL; + while (handler_obj->handler != handler) { + if (handler_obj->next) { + parent_obj = handler_obj; + handler_obj = handler_obj->next; + } else { + break; + } + } + + if (handler_obj->handler != handler) { status = AE_BAD_PARAMETER; goto unlock_and_exit; } - /* Make sure all deferred tasks are completed */ - (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); - acpi_os_wait_events_complete(NULL); - status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); - if (ACPI_FAILURE(status)) { - goto exit; + /* + * Remove the handler. There are three possible cases. + * First, we may need to remove a non-embedded object. + * Second, we may need to remove the embedded object's + * handler data, while non-embedded objects exist. + * Finally, we may need to remove the embedded object + * entirely along with its container. + */ + if (parent_obj) { + /* Non-embedded object is being removed. */ + parent_obj->next = handler_obj->next; + ACPI_FREE(handler_obj); + } else if (notify_obj->notify.next) { + /* + * The handler matches the embedded object, but + * there are more handler objects in the list. + * Replace the embedded object's data with the + * first next object's data and remove that + * object. + */ + parent_obj = ¬ify_obj->notify; + handler_obj = notify_obj->notify.next; + *parent_obj = *handler_obj; + ACPI_FREE(handler_obj); + } else { + /* No more handler objects in the list. */ + obj_desc->common_notify.system_notify = NULL; + acpi_ut_remove_reference(notify_obj); } - - /* Remove the handler */ - obj_desc->common_notify.system_notify = NULL; - acpi_ut_remove_reference(notify_obj); } if (handler_type & ACPI_DEVICE_NOTIFY) { @@ -523,14 +634,6 @@ acpi_remove_notify_handler(acpi_handle device, status = AE_BAD_PARAMETER; goto unlock_and_exit; } - /* Make sure all deferred tasks are completed */ - - (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); - acpi_os_wait_events_complete(NULL); - status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); - if (ACPI_FAILURE(status)) { - goto exit; - } /* Remove the handler */ obj_desc->common_notify.device_notify = NULL; @@ -617,13 +720,6 @@ acpi_install_gpe_handler(acpi_handle gpe_device, handler->context = context; handler->method_node = gpe_event_info->dispatch.method_node; - /* Disable the GPE before installing the handler */ - - status = acpi_ev_disable_gpe(gpe_event_info); - if (ACPI_FAILURE(status)) { - goto unlock_and_exit; - } - /* Install the handler */ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); @@ -707,13 +803,6 @@ acpi_remove_gpe_handler(acpi_handle gpe_device, goto unlock_and_exit; } - /* Disable the GPE before removing the handler */ - - status = acpi_ev_disable_gpe(gpe_event_info); - if (ACPI_FAILURE(status)) { - goto unlock_and_exit; - } - /* Make sure all deferred tasks are completed */ (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index eed7a38d25f..124c157215b 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -201,23 +201,27 @@ ACPI_EXPORT_SYMBOL(acpi_enable_event) /******************************************************************************* * - * FUNCTION: acpi_set_gpe_type + * FUNCTION: acpi_set_gpe * * PARAMETERS: gpe_device - Parent GPE Device * gpe_number - GPE level within the GPE block - * Type - New GPE type + * action - Enable or disable + * Called from ISR or not * * RETURN: Status * - * DESCRIPTION: Set the type of an individual GPE + * DESCRIPTION: Enable or disable an ACPI event (general purpose) * ******************************************************************************/ -acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type) +acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action) { acpi_status status = AE_OK; + acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; - ACPI_FUNCTION_TRACE(acpi_set_gpe_type); + ACPI_FUNCTION_TRACE(acpi_set_gpe); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ @@ -227,19 +231,29 @@ acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type) goto unlock_and_exit; } - if ((gpe_event_info->flags & ACPI_GPE_TYPE_MASK) == type) { - return_ACPI_STATUS(AE_OK); - } + /* Perform the action */ + + switch (action) { + case ACPI_GPE_ENABLE: + status = acpi_ev_enable_gpe(gpe_event_info); + break; - /* Set the new type (will disable GPE if currently enabled) */ + case ACPI_GPE_DISABLE: + status = acpi_ev_disable_gpe(gpe_event_info); + break; - status = acpi_ev_set_gpe_type(gpe_event_info, type); + default: + ACPI_ERROR((AE_INFO, "Invalid action\n")); + status = AE_BAD_PARAMETER; + break; + } unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } -ACPI_EXPORT_SYMBOL(acpi_set_gpe_type) +ACPI_EXPORT_SYMBOL(acpi_set_gpe) /******************************************************************************* * @@ -247,15 +261,14 @@ ACPI_EXPORT_SYMBOL(acpi_set_gpe_type) * * PARAMETERS: gpe_device - Parent GPE Device * gpe_number - GPE level within the GPE block - * Flags - Just enable, or also wake enable? - * Called from ISR or not + * type - Purpose the GPE will be used for * * RETURN: Status * - * DESCRIPTION: Enable an ACPI event (general purpose) + * DESCRIPTION: Take a reference to a GPE and enable it if necessary * ******************************************************************************/ -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number) +acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type) { acpi_status status = AE_OK; acpi_cpu_flags flags; @@ -263,6 +276,9 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number) ACPI_FUNCTION_TRACE(acpi_enable_gpe); + if (type & ~ACPI_GPE_TYPE_WAKE_RUN) + return_ACPI_STATUS(AE_BAD_PARAMETER); + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ @@ -273,15 +289,32 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number) goto unlock_and_exit; } - /* Perform the enable */ + if (type & ACPI_GPE_TYPE_RUNTIME) { + if (++gpe_event_info->runtime_count == 1) { + status = acpi_ev_enable_gpe(gpe_event_info); + if (ACPI_FAILURE(status)) + gpe_event_info->runtime_count--; + } + } + + if (type & ACPI_GPE_TYPE_WAKE) { + if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } - status = acpi_ev_enable_gpe(gpe_event_info, TRUE); + /* + * Wake-up GPEs are only enabled right prior to putting the + * system into a sleep state. + */ + if (++gpe_event_info->wakeup_count == 1) + acpi_ev_update_gpe_enable_masks(gpe_event_info); + } - unlock_and_exit: +unlock_and_exit: acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } - ACPI_EXPORT_SYMBOL(acpi_enable_gpe) /******************************************************************************* @@ -290,15 +323,14 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe) * * PARAMETERS: gpe_device - Parent GPE Device * gpe_number - GPE level within the GPE block - * Flags - Just disable, or also wake disable? - * Called from ISR or not + * type - Purpose the GPE won't be used for any more * * RETURN: Status * - * DESCRIPTION: Disable an ACPI event (general purpose) + * DESCRIPTION: Release a reference to a GPE and disable it if necessary * ******************************************************************************/ -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number) +acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type) { acpi_status status = AE_OK; acpi_cpu_flags flags; @@ -306,6 +338,9 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number) ACPI_FUNCTION_TRACE(acpi_disable_gpe); + if (type & ~ACPI_GPE_TYPE_WAKE_RUN) + return_ACPI_STATUS(AE_BAD_PARAMETER); + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ @@ -315,13 +350,24 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number) goto unlock_and_exit; } - status = acpi_ev_disable_gpe(gpe_event_info); + if ((type & ACPI_GPE_TYPE_RUNTIME) && gpe_event_info->runtime_count) { + if (--gpe_event_info->runtime_count == 0) + status = acpi_ev_disable_gpe(gpe_event_info); + } + + if ((type & ACPI_GPE_TYPE_WAKE) && gpe_event_info->wakeup_count) { + /* + * Wake-up GPEs are not enabled after leaving system sleep + * states, so we don't need to disable them here. + */ + if (--gpe_event_info->wakeup_count == 0) + acpi_ev_update_gpe_enable_masks(gpe_event_info); + } unlock_and_exit: acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } - ACPI_EXPORT_SYMBOL(acpi_disable_gpe) /******************************************************************************* diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 8a95e8329df..f53fbe307c9 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -422,11 +422,10 @@ static int acpi_button_add(struct acpi_device *device) if (device->wakeup.flags.valid) { /* Button's GPE is run-wake GPE */ - acpi_set_gpe_type(device->wakeup.gpe_device, - device->wakeup.gpe_number, - ACPI_GPE_TYPE_WAKE_RUN); acpi_enable_gpe(device->wakeup.gpe_device, - device->wakeup.gpe_number); + device->wakeup.gpe_number, + ACPI_GPE_TYPE_WAKE_RUN); + device->wakeup.run_wake_count++; device->wakeup.state.enabled = 1; } @@ -446,6 +445,14 @@ static int acpi_button_remove(struct acpi_device *device, int type) { struct acpi_button *button = acpi_driver_data(device); + if (device->wakeup.flags.valid) { + acpi_disable_gpe(device->wakeup.gpe_device, + device->wakeup.gpe_number, + ACPI_GPE_TYPE_WAKE_RUN); + device->wakeup.run_wake_count--; + device->wakeup.state.enabled = 0; + } + acpi_button_remove_fs(device); input_unregister_device(button->input); kfree(button); diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index d6471bb6852..27e0b92b2e3 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -307,7 +307,11 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) pr_debug(PREFIX "transaction start\n"); /* disable GPE during transaction if storm is detected */ if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { - acpi_disable_gpe(NULL, ec->gpe); + /* + * It has to be disabled at the hardware level regardless of the + * GPE reference counting, so that it doesn't trigger. + */ + acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_DISABLE); } status = acpi_ec_transaction_unlocked(ec, t); @@ -316,8 +320,12 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) ec_check_sci_sync(ec, acpi_ec_read_status(ec)); if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { msleep(1); - /* it is safe to enable GPE outside of transaction */ - acpi_enable_gpe(NULL, ec->gpe); + /* + * It is safe to enable the GPE outside of the transaction. Use + * acpi_set_gpe() for that, since we used it to disable the GPE + * above. + */ + acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_ENABLE); } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) { pr_info(PREFIX "GPE storm detected, " "transactions will use polling mode\n"); @@ -788,8 +796,8 @@ static int ec_install_handlers(struct acpi_ec *ec) &acpi_ec_gpe_handler, ec); if (ACPI_FAILURE(status)) return -ENODEV; - acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME); - acpi_enable_gpe(NULL, ec->gpe); + + acpi_enable_gpe(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME); status = acpi_install_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler, @@ -806,6 +814,7 @@ static int ec_install_handlers(struct acpi_ec *ec) } else { acpi_remove_gpe_handler(NULL, ec->gpe, &acpi_ec_gpe_handler); + acpi_disable_gpe(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME); return -ENODEV; } } @@ -816,6 +825,7 @@ static int ec_install_handlers(struct acpi_ec *ec) static void ec_remove_handlers(struct acpi_ec *ec) { + acpi_disable_gpe(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME); if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler))) pr_err(PREFIX "failed to remove space handler\n"); @@ -1057,16 +1067,16 @@ error: static int acpi_ec_suspend(struct acpi_device *device, pm_message_t state) { struct acpi_ec *ec = acpi_driver_data(device); - /* Stop using GPE */ - acpi_disable_gpe(NULL, ec->gpe); + /* Stop using the GPE, but keep it reference counted. */ + acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_DISABLE); return 0; } static int acpi_ec_resume(struct acpi_device *device) { struct acpi_ec *ec = acpi_driver_data(device); - /* Enable use of GPE back */ - acpi_enable_gpe(NULL, ec->gpe); + /* Enable the GPE again, but don't reference count it once more. */ + acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_ENABLE); return 0; } diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index cb28e0502ac..9c4c962e46e 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -36,8 +36,6 @@ static inline int acpi_debug_init(void) { return 0; } int acpi_power_init(void); int acpi_device_sleep_wake(struct acpi_device *dev, int enable, int sleep_state, int dev_state); -int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state); -int acpi_disable_wakeup_device_power(struct acpi_device *dev); int acpi_power_get_inferred_state(struct acpi_device *device); int acpi_power_transition(struct acpi_device *device, int state); extern int acpi_power_nocheck; diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c index a5a77b78a72..2ef04098cc1 100644 --- a/drivers/acpi/pci_bind.c +++ b/drivers/acpi/pci_bind.c @@ -26,7 +26,9 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/pci.h> +#include <linux/pci-acpi.h> #include <linux/acpi.h> +#include <linux/pm_runtime.h> #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> @@ -38,7 +40,13 @@ static int acpi_pci_unbind(struct acpi_device *device) struct pci_dev *dev; dev = acpi_get_pci_dev(device->handle); - if (!dev || !dev->subordinate) + if (!dev) + goto out; + + device_set_run_wake(&dev->dev, false); + pci_acpi_remove_pm_notifier(device); + + if (!dev->subordinate) goto out; acpi_pci_irq_del_prt(dev->subordinate); @@ -62,6 +70,10 @@ static int acpi_pci_bind(struct acpi_device *device) if (!dev) return 0; + pci_acpi_add_pm_notifier(device, dev); + if (device->wakeup.flags.run_wake) + device_set_run_wake(&dev->dev, true); + /* * Install the 'bind' function to facilitate callbacks for * children of the P2P bridge. diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 64f55b6db73..d724736d56c 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -30,6 +30,7 @@ #include <linux/proc_fs.h> #include <linux/spinlock.h> #include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/pci.h> #include <linux/pci-acpi.h> #include <linux/acpi.h> @@ -528,6 +529,10 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) if (flags != base_flags) acpi_pci_osc_support(root, flags); + pci_acpi_add_bus_pm_notifier(device, root->bus); + if (device->wakeup.flags.run_wake) + device_set_run_wake(root->bus->bridge, true); + return 0; end: @@ -549,6 +554,9 @@ static int acpi_pci_root_remove(struct acpi_device *device, int type) { struct acpi_pci_root *root = acpi_driver_data(device); + device_set_run_wake(root->bus->bridge, false); + pci_acpi_remove_bus_pm_notifier(device); + kfree(root); return 0; } @@ -558,6 +566,7 @@ static int __init acpi_pci_root_init(void) if (acpi_pci_disabled) return 0; + pci_acpi_crs_quirks(); if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0) return -ENODEV; diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 3e009674f33..fb7fc24fe72 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -741,19 +741,40 @@ acpi_bus_extract_wakeup_device_power_package(struct acpi_device *device, return AE_OK; } -static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) +static void acpi_bus_set_run_wake_flags(struct acpi_device *device) { - acpi_status status = 0; - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - union acpi_object *package = NULL; - int psw_error; - struct acpi_device_id button_device_ids[] = { {"PNP0C0D", 0}, {"PNP0C0C", 0}, {"PNP0C0E", 0}, {"", 0}, }; + acpi_status status; + acpi_event_status event_status; + + device->wakeup.run_wake_count = 0; + device->wakeup.flags.notifier_present = 0; + + /* Power button, Lid switch always enable wakeup */ + if (!acpi_match_device_ids(device, button_device_ids)) { + device->wakeup.flags.run_wake = 1; + device->wakeup.flags.always_enabled = 1; + return; + } + + status = acpi_get_gpe_status(NULL, device->wakeup.gpe_number, + ACPI_NOT_ISR, &event_status); + if (status == AE_OK) + device->wakeup.flags.run_wake = + !!(event_status & ACPI_EVENT_FLAG_HANDLE); +} + +static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) +{ + acpi_status status = 0; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *package = NULL; + int psw_error; /* _PRW */ status = acpi_evaluate_object(device->handle, "_PRW", NULL, &buffer); @@ -773,6 +794,7 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) device->wakeup.flags.valid = 1; device->wakeup.prepare_count = 0; + acpi_bus_set_run_wake_flags(device); /* Call _PSW/_DSW object to disable its ability to wake the sleeping * system for the ACPI device with the _PRW object. * The _PSW object is depreciated in ACPI 3.0 and is replaced by _DSW. @@ -784,10 +806,6 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "error in _DSW or _PSW evaluation\n")); - /* Power button, Lid switch always enable wakeup */ - if (!acpi_match_device_ids(device, button_device_ids)) - device->wakeup.flags.run_wake = 1; - end: if (ACPI_FAILURE(status)) device->flags.wake_capable = 0; diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 79d33d908b5..3bde594a997 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -745,9 +745,18 @@ int acpi_pm_device_sleep_wake(struct device *dev, bool enable) return -ENODEV; } - error = enable ? - acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) : - acpi_disable_wakeup_device_power(adev); + if (enable) { + error = acpi_enable_wakeup_device_power(adev, + acpi_target_sleep_state); + if (!error) + acpi_enable_gpe(adev->wakeup.gpe_device, + adev->wakeup.gpe_number, + ACPI_GPE_TYPE_WAKE); + } else { + acpi_disable_gpe(adev->wakeup.gpe_device, adev->wakeup.gpe_number, + ACPI_GPE_TYPE_WAKE); + error = acpi_disable_wakeup_device_power(adev); + } if (!error) dev_info(dev, "wake-up capability %s by ACPI\n", enable ? "enabled" : "disabled"); diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index d11282975f3..a206a12da78 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -387,10 +387,10 @@ static ssize_t counter_set(struct kobject *kobj, if (index < num_gpes) { if (!strcmp(buf, "disable\n") && (status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_disable_gpe(handle, index); + result = acpi_set_gpe(handle, index, ACPI_GPE_DISABLE); else if (!strcmp(buf, "enable\n") && !(status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_enable_gpe(handle, index); + result = acpi_set_gpe(handle, index, ACPI_GPE_ENABLE); else if (!strcmp(buf, "clear\n") && (status & ACPI_EVENT_FLAG_SET)) result = acpi_clear_gpe(handle, index, ACPI_NOT_ISR); diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c index e0ee0c036f5..4b9d339a6e2 100644 --- a/drivers/acpi/wakeup.c +++ b/drivers/acpi/wakeup.c @@ -21,12 +21,12 @@ ACPI_MODULE_NAME("wakeup_devices") /** - * acpi_enable_wakeup_device_prep - prepare wakeup devices - * @sleep_state: ACPI state - * Enable all wakup devices power if the devices' wakeup level - * is higher than requested sleep level + * acpi_enable_wakeup_device_prep - Prepare wake-up devices. + * @sleep_state: ACPI system sleep state. + * + * Enable all wake-up devices' power, unless the requested system sleep state is + * too deep. */ - void acpi_enable_wakeup_device_prep(u8 sleep_state) { struct list_head *node, *next; @@ -36,9 +36,8 @@ void acpi_enable_wakeup_device_prep(u8 sleep_state) struct acpi_device, wakeup_list); - if (!dev->wakeup.flags.valid || - !dev->wakeup.state.enabled || - (sleep_state > (u32) dev->wakeup.sleep_state)) + if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled + || (sleep_state > (u32) dev->wakeup.sleep_state)) continue; acpi_enable_wakeup_device_power(dev, sleep_state); @@ -46,9 +45,12 @@ void acpi_enable_wakeup_device_prep(u8 sleep_state) } /** - * acpi_enable_wakeup_device - enable wakeup devices - * @sleep_state: ACPI state - * Enable all wakup devices's GPE + * acpi_enable_wakeup_device - Enable wake-up device GPEs. + * @sleep_state: ACPI system sleep state. + * + * Enable all wake-up devices' GPEs, with the assumption that + * acpi_disable_all_gpes() was executed before, so we don't need to disable any + * GPEs here. */ void acpi_enable_wakeup_device(u8 sleep_state) { @@ -65,29 +67,22 @@ void acpi_enable_wakeup_device(u8 sleep_state) if (!dev->wakeup.flags.valid) continue; - /* If users want to disable run-wake GPE, - * we only disable it for wake and leave it for runtime - */ if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count) - || sleep_state > (u32) dev->wakeup.sleep_state) { - if (dev->wakeup.flags.run_wake) { - /* set_gpe_type will disable GPE, leave it like that */ - acpi_set_gpe_type(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, - ACPI_GPE_TYPE_RUNTIME); - } + || sleep_state > (u32) dev->wakeup.sleep_state) continue; - } - if (!dev->wakeup.flags.run_wake) - acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number); + + /* The wake-up power should have been enabled already. */ + acpi_set_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number, + ACPI_GPE_ENABLE); } } /** - * acpi_disable_wakeup_device - disable devices' wakeup capability - * @sleep_state: ACPI state - * Disable all wakup devices's GPE and wakeup capability + * acpi_disable_wakeup_device - Disable devices' wakeup capability. + * @sleep_state: ACPI system sleep state. + * + * This function only affects devices with wakeup.state.enabled set, which means + * that it reverses the changes made by acpi_enable_wakeup_device_prep(). */ void acpi_disable_wakeup_device(u8 sleep_state) { @@ -97,30 +92,11 @@ void acpi_disable_wakeup_device(u8 sleep_state) struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); - if (!dev->wakeup.flags.valid) - continue; - - if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count) - || sleep_state > (u32) dev->wakeup.sleep_state) { - if (dev->wakeup.flags.run_wake) { - acpi_set_gpe_type(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, - ACPI_GPE_TYPE_WAKE_RUN); - /* Re-enable it, since set_gpe_type will disable it */ - acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number); - } + if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled + || (sleep_state > (u32) dev->wakeup.sleep_state)) continue; - } acpi_disable_wakeup_device_power(dev); - /* Never disable run-wake GPE */ - if (!dev->wakeup.flags.run_wake) { - acpi_disable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number); - acpi_clear_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); - } } } @@ -134,13 +110,11 @@ int __init acpi_wakeup_device_init(void) struct acpi_device, wakeup_list); /* In case user doesn't load button driver */ - if (!dev->wakeup.flags.run_wake || dev->wakeup.state.enabled) + if (!dev->wakeup.flags.always_enabled || + dev->wakeup.state.enabled) continue; - acpi_set_gpe_type(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, - ACPI_GPE_TYPE_WAKE_RUN); - acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number); + acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number, + ACPI_GPE_TYPE_WAKE); dev->wakeup.state.enabled = 1; } mutex_unlock(&acpi_device_lock); diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig index 3464ebc4cdb..452fde9edf8 100644 --- a/drivers/isdn/hisax/Kconfig +++ b/drivers/isdn/hisax/Kconfig @@ -109,7 +109,7 @@ config HISAX_16_3 config HISAX_TELESPCI bool "Teles PCI" - depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) help This enables HiSax support for the Teles PCI. See <file:Documentation/isdn/README.HiSax> on how to configure it. @@ -237,7 +237,7 @@ config HISAX_MIC config HISAX_NETJET bool "NETjet card" - depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) help This enables HiSax support for the NetJet from Traverse Technologies. @@ -248,7 +248,7 @@ config HISAX_NETJET config HISAX_NETJET_U bool "NETspider U card" - depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) help This enables HiSax support for the Netspider U interface ISDN card from Traverse Technologies. @@ -287,7 +287,7 @@ config HISAX_HSTSAPHIR config HISAX_BKM_A4T bool "Telekom A4T card" - depends on PCI && PCI_LEGACY + depends on PCI help This enables HiSax support for the Telekom A4T card. @@ -297,7 +297,7 @@ config HISAX_BKM_A4T config HISAX_SCT_QUADRO bool "Scitel Quadro card" - depends on PCI && PCI_LEGACY + depends on PCI help This enables HiSax support for the Scitel Quadro card. @@ -316,7 +316,7 @@ config HISAX_GAZEL config HISAX_HFC_PCI bool "HFC PCI-Bus cards" - depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) help This enables HiSax support for the HFC-S PCI 2BDS0 based cards. @@ -325,7 +325,7 @@ config HISAX_HFC_PCI config HISAX_W6692 bool "Winbond W6692 based cards" - depends on PCI && PCI_LEGACY + depends on PCI help This enables HiSax support for Winbond W6692 based PCI ISDN cards. @@ -341,7 +341,7 @@ config HISAX_HFC_SX config HISAX_ENTERNOW_PCI bool "Formula-n enter:now PCI card" - depends on HISAX_NETJET && PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) help This enables HiSax support for the Formula-n enter:now PCI ISDN card. @@ -412,7 +412,7 @@ config HISAX_HFC4S8S config HISAX_FRITZ_PCIPNP tristate "AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)" - depends on PCI && PCI_LEGACY && EXPERIMENTAL + depends on PCI && EXPERIMENTAL help This enables the driver for the AVM Fritz!Card PCI, Fritz!Card PCI v2 and Fritz!Card PnP. diff --git a/drivers/isdn/hisax/avm_pci.c b/drivers/isdn/hisax/avm_pci.c index 7cabc5a1949..14295a155e7 100644 --- a/drivers/isdn/hisax/avm_pci.c +++ b/drivers/isdn/hisax/avm_pci.c @@ -822,7 +822,7 @@ static int __devinit avm_pnp_setup(struct IsdnCardState *cs) #endif /* __ISAPNP__ */ -#ifndef CONFIG_PCI_LEGACY +#ifndef CONFIG_PCI static int __devinit avm_pci_setup(struct IsdnCardState *cs) { @@ -835,7 +835,7 @@ static struct pci_dev *dev_avm __devinitdata = NULL; static int __devinit avm_pci_setup(struct IsdnCardState *cs) { - if ((dev_avm = pci_find_device(PCI_VENDOR_ID_AVM, + if ((dev_avm = hisax_find_pci_device(PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_A1, dev_avm))) { if (pci_enable_device(dev_avm)) @@ -864,7 +864,7 @@ static int __devinit avm_pci_setup(struct IsdnCardState *cs) return (1); } -#endif /* CONFIG_PCI_LEGACY */ +#endif /* CONFIG_PCI */ int __devinit setup_avm_pcipnp(struct IsdnCard *card) diff --git a/drivers/isdn/hisax/bkm_a4t.c b/drivers/isdn/hisax/bkm_a4t.c index 9ca2ee54cc9..9f2009c0b69 100644 --- a/drivers/isdn/hisax/bkm_a4t.c +++ b/drivers/isdn/hisax/bkm_a4t.c @@ -340,7 +340,7 @@ setup_bkm_a4t(struct IsdnCard *card) } else return (0); - while ((dev_a4t = pci_find_device(PCI_VENDOR_ID_ZORAN, + while ((dev_a4t = hisax_find_pci_device(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_a4t))) { ret = a4t_pci_probe(dev_a4t, cs, &found, &pci_memaddr); if (!ret) diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c index e1ff4717a8a..e775706c60e 100644 --- a/drivers/isdn/hisax/bkm_a8.c +++ b/drivers/isdn/hisax/bkm_a8.c @@ -301,7 +301,7 @@ setup_sct_quadro(struct IsdnCard *card) (sub_vendor_id != PCI_VENDOR_ID_BERKOM))) return (0); if (cs->subtyp == SCT_1) { - while ((dev_a8 = pci_find_device(PCI_VENDOR_ID_PLX, + while ((dev_a8 = hisax_find_pci_device(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, dev_a8))) { sub_vendor_id = dev_a8->subsystem_vendor; diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c index 0b0c2e5d806..780da9bda91 100644 --- a/drivers/isdn/hisax/diva.c +++ b/drivers/isdn/hisax/diva.c @@ -1148,7 +1148,7 @@ static int __devinit setup_diva_isapnp(struct IsdnCard *card) #endif /* ISAPNP */ -#ifdef CONFIG_PCI_LEGACY +#ifdef CONFIG_PCI static struct pci_dev *dev_diva __devinitdata = NULL; static struct pci_dev *dev_diva_u __devinitdata = NULL; static struct pci_dev *dev_diva201 __devinitdata = NULL; @@ -1159,21 +1159,21 @@ static int __devinit setup_diva_pci(struct IsdnCard *card) struct IsdnCardState *cs = card->cs; cs->subtyp = 0; - if ((dev_diva = pci_find_device(PCI_VENDOR_ID_EICON, + if ((dev_diva = hisax_find_pci_device(PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA20, dev_diva))) { if (pci_enable_device(dev_diva)) return(0); cs->subtyp = DIVA_PCI; cs->irq = dev_diva->irq; cs->hw.diva.cfg_reg = pci_resource_start(dev_diva, 2); - } else if ((dev_diva_u = pci_find_device(PCI_VENDOR_ID_EICON, + } else if ((dev_diva_u = hisax_find_pci_device(PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA20_U, dev_diva_u))) { if (pci_enable_device(dev_diva_u)) return(0); cs->subtyp = DIVA_PCI; cs->irq = dev_diva_u->irq; cs->hw.diva.cfg_reg = pci_resource_start(dev_diva_u, 2); - } else if ((dev_diva201 = pci_find_device(PCI_VENDOR_ID_EICON, + } else if ((dev_diva201 = hisax_find_pci_device(PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA201, dev_diva201))) { if (pci_enable_device(dev_diva201)) return(0); @@ -1183,7 +1183,7 @@ static int __devinit setup_diva_pci(struct IsdnCard *card) (ulong) ioremap(pci_resource_start(dev_diva201, 0), 4096); cs->hw.diva.cfg_reg = (ulong) ioremap(pci_resource_start(dev_diva201, 1), 4096); - } else if ((dev_diva202 = pci_find_device(PCI_VENDOR_ID_EICON, + } else if ((dev_diva202 = hisax_find_pci_device(PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA202, dev_diva202))) { if (pci_enable_device(dev_diva202)) return(0); @@ -1229,14 +1229,14 @@ static int __devinit setup_diva_pci(struct IsdnCard *card) return (1); /* card found */ } -#else /* if !CONFIG_PCI_LEGACY */ +#else /* if !CONFIG_PCI */ static int __devinit setup_diva_pci(struct IsdnCard *card) { return (-1); /* card not found; continue search */ } -#endif /* CONFIG_PCI_LEGACY */ +#endif /* CONFIG_PCI */ int __devinit setup_diva(struct IsdnCard *card) diff --git a/drivers/isdn/hisax/elsa.c b/drivers/isdn/hisax/elsa.c index aa29d1cf16a..23c41fcd864 100644 --- a/drivers/isdn/hisax/elsa.c +++ b/drivers/isdn/hisax/elsa.c @@ -1025,7 +1025,7 @@ setup_elsa_pcmcia(struct IsdnCard *card) cs->irq); } -#ifdef CONFIG_PCI_LEGACY +#ifdef CONFIG_PCI static struct pci_dev *dev_qs1000 __devinitdata = NULL; static struct pci_dev *dev_qs3000 __devinitdata = NULL; @@ -1035,7 +1035,7 @@ setup_elsa_pci(struct IsdnCard *card) struct IsdnCardState *cs = card->cs; cs->subtyp = 0; - if ((dev_qs1000 = pci_find_device(PCI_VENDOR_ID_ELSA, + if ((dev_qs1000 = hisax_find_pci_device(PCI_VENDOR_ID_ELSA, PCI_DEVICE_ID_ELSA_MICROLINK, dev_qs1000))) { if (pci_enable_device(dev_qs1000)) return(0); @@ -1043,7 +1043,7 @@ setup_elsa_pci(struct IsdnCard *card) cs->irq = dev_qs1000->irq; cs->hw.elsa.cfg = pci_resource_start(dev_qs1000, 1); cs->hw.elsa.base = pci_resource_start(dev_qs1000, 3); - } else if ((dev_qs3000 = pci_find_device(PCI_VENDOR_ID_ELSA, + } else if ((dev_qs3000 = hisax_find_pci_device(PCI_VENDOR_ID_ELSA, PCI_DEVICE_ID_ELSA_QS3000, dev_qs3000))) { if (pci_enable_device(dev_qs3000)) return(0); @@ -1093,7 +1093,7 @@ setup_elsa_pci(struct IsdnCard *card) { return (1); } -#endif /* CONFIG_PCI_LEGACY */ +#endif /* CONFIG_PCI */ static int __devinit setup_elsa_common(struct IsdnCard *card) diff --git a/drivers/isdn/hisax/enternow_pci.c b/drivers/isdn/hisax/enternow_pci.c index 39f421ed8de..26264abf1f5 100644 --- a/drivers/isdn/hisax/enternow_pci.c +++ b/drivers/isdn/hisax/enternow_pci.c @@ -406,7 +406,7 @@ setup_enternow_pci(struct IsdnCard *card) for ( ;; ) { - if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET, + if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) { ret = en_pci_probe(dev_netjet, cs); if (!ret) diff --git a/drivers/isdn/hisax/gazel.c b/drivers/isdn/hisax/gazel.c index 0ea3b460768..353982fc143 100644 --- a/drivers/isdn/hisax/gazel.c +++ b/drivers/isdn/hisax/gazel.c @@ -531,7 +531,7 @@ setup_gazelisa(struct IsdnCard *card, struct IsdnCardState *cs) return (0); } -#ifdef CONFIG_PCI_LEGACY +#ifdef CONFIG_PCI static struct pci_dev *dev_tel __devinitdata = NULL; static int __devinit @@ -546,7 +546,7 @@ setup_gazelpci(struct IsdnCardState *cs) found = 0; seekcard = PCI_DEVICE_ID_PLX_R685; for (nbseek = 0; nbseek < 4; nbseek++) { - if ((dev_tel = pci_find_device(PCI_VENDOR_ID_PLX, + if ((dev_tel = hisax_find_pci_device(PCI_VENDOR_ID_PLX, seekcard, dev_tel))) { if (pci_enable_device(dev_tel)) return 1; @@ -620,7 +620,7 @@ setup_gazelpci(struct IsdnCardState *cs) return (0); } -#endif /* CONFIG_PCI_LEGACY */ +#endif /* CONFIG_PCI */ int __devinit setup_gazel(struct IsdnCard *card) @@ -640,7 +640,7 @@ setup_gazel(struct IsdnCard *card) return (0); } else { -#ifdef CONFIG_PCI_LEGACY +#ifdef CONFIG_PCI if (setup_gazelpci(cs)) return (0); #else diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c index 10914731b30..917cc84065b 100644 --- a/drivers/isdn/hisax/hfc_pci.c +++ b/drivers/isdn/hisax/hfc_pci.c @@ -1658,7 +1658,7 @@ setup_hfcpci(struct IsdnCard *card) i = 0; while (id_list[i].vendor_id) { - tmp_hfcpci = pci_find_device(id_list[i].vendor_id, + tmp_hfcpci = hisax_find_pci_device(id_list[i].vendor_id, id_list[i].device_id, dev_hfcpci); i++; diff --git a/drivers/isdn/hisax/hisax.h b/drivers/isdn/hisax/hisax.h index 0685c194696..832a87855ff 100644 --- a/drivers/isdn/hisax/hisax.h +++ b/drivers/isdn/hisax/hisax.h @@ -1323,3 +1323,26 @@ void release_tei(struct IsdnCardState *cs); char *HiSax_getrev(const char *revision); int TeiNew(void); void TeiFree(void); + +#ifdef CONFIG_PCI + +#include <linux/pci.h> + +/* adaptation wrapper for old usage + * WARNING! This is unfit for use in a PCI hotplug environment, + * as the returned PCI device can disappear at any moment in time. + * Callers should be converted to use pci_get_device() instead. + */ +static inline struct pci_dev *hisax_find_pci_device(unsigned int vendor, + unsigned int device, + struct pci_dev *from) +{ + struct pci_dev *pdev; + + pci_dev_get(from); + pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from); + pci_dev_put(pdev); + return pdev; +} + +#endif diff --git a/drivers/isdn/hisax/niccy.c b/drivers/isdn/hisax/niccy.c index ef00633e1d2..ccaa6e13310 100644 --- a/drivers/isdn/hisax/niccy.c +++ b/drivers/isdn/hisax/niccy.c @@ -297,12 +297,12 @@ int __devinit setup_niccy(struct IsdnCard *card) return 0; } } else { -#ifdef CONFIG_PCI_LEGACY +#ifdef CONFIG_PCI static struct pci_dev *niccy_dev __devinitdata; u_int pci_ioaddr; cs->subtyp = 0; - if ((niccy_dev = pci_find_device(PCI_VENDOR_ID_SATSAGEM, + if ((niccy_dev = hisax_find_pci_device(PCI_VENDOR_ID_SATSAGEM, PCI_DEVICE_ID_SATSAGEM_NICCY, niccy_dev))) { if (pci_enable_device(niccy_dev)) @@ -354,7 +354,7 @@ int __devinit setup_niccy(struct IsdnCard *card) printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n"); printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n"); return 0; -#endif /* CONFIG_PCI_LEGACY */ +#endif /* CONFIG_PCI */ } printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n", (cs->subtyp == 1) ? "PnP" : "PCI", diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c index 8d36ccc87d8..2344e7b3344 100644 --- a/drivers/isdn/hisax/nj_s.c +++ b/drivers/isdn/hisax/nj_s.c @@ -276,7 +276,7 @@ setup_netjet_s(struct IsdnCard *card) for ( ;; ) { - if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET, + if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) { ret = njs_pci_probe(dev_netjet, cs); if (!ret) diff --git a/drivers/isdn/hisax/nj_u.c b/drivers/isdn/hisax/nj_u.c index d306c946ffb..095e974aed8 100644 --- a/drivers/isdn/hisax/nj_u.c +++ b/drivers/isdn/hisax/nj_u.c @@ -240,7 +240,7 @@ setup_netjet_u(struct IsdnCard *card) for ( ;; ) { - if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET, + if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) { ret = nju_pci_probe(dev_netjet, cs); if (!ret) diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c index 5569a522e2a..69dfc8d2901 100644 --- a/drivers/isdn/hisax/sedlbauer.c +++ b/drivers/isdn/hisax/sedlbauer.c @@ -598,7 +598,7 @@ setup_sedlbauer_isapnp(struct IsdnCard *card, int *bytecnt) } #endif /* __ISAPNP__ */ -#ifdef CONFIG_PCI_LEGACY +#ifdef CONFIG_PCI static struct pci_dev *dev_sedl __devinitdata = NULL; static int __devinit @@ -607,7 +607,7 @@ setup_sedlbauer_pci(struct IsdnCard *card) struct IsdnCardState *cs = card->cs; u16 sub_vendor_id, sub_id; - if ((dev_sedl = pci_find_device(PCI_VENDOR_ID_TIGERJET, + if ((dev_sedl = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) { if (pci_enable_device(dev_sedl)) return(0); @@ -673,7 +673,7 @@ setup_sedlbauer_pci(struct IsdnCard *card) return (1); } -#endif /* CONFIG_PCI_LEGACY */ +#endif /* CONFIG_PCI */ int __devinit setup_sedlbauer(struct IsdnCard *card) diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c index 28b08de4673..b85ceb3746c 100644 --- a/drivers/isdn/hisax/telespci.c +++ b/drivers/isdn/hisax/telespci.c @@ -300,7 +300,7 @@ setup_telespci(struct IsdnCard *card) if (cs->typ != ISDN_CTYPE_TELESPCI) return (0); - if ((dev_tel = pci_find_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) { + if ((dev_tel = hisax_find_pci_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) { if (pci_enable_device(dev_tel)) return(0); cs->irq = dev_tel->irq; diff --git a/drivers/isdn/hisax/w6692.c b/drivers/isdn/hisax/w6692.c index c4d862c11a6..9d6e864023f 100644 --- a/drivers/isdn/hisax/w6692.c +++ b/drivers/isdn/hisax/w6692.c @@ -1007,7 +1007,7 @@ setup_w6692(struct IsdnCard *card) return (0); while (id_list[id_idx].vendor_id) { - dev_w6692 = pci_find_device(id_list[id_idx].vendor_id, + dev_w6692 = hisax_find_pci_device(id_list[id_idx].vendor_id, id_list[id_idx].device_id, dev_w6692); if (dev_w6692) { diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index b1ecefa2a23..7858a117e80 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -21,17 +21,6 @@ config PCI_MSI If you don't know what to do here, say N. -config PCI_LEGACY - bool "Enable deprecated pci_find_* API" - depends on PCI - default y - help - Say Y here if you want to include support for the deprecated - pci_find_device() API. Most drivers have been converted over - to using the proper hotplug APIs, so this option serves to - include/exclude only a few drivers that are still using this - API. - config PCI_DEBUG bool "PCI Debugging" depends on PCI && DEBUG_KERNEL diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 4df48d58eaa..8674c1ebe97 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -2,14 +2,13 @@ # Makefile for the PCI bus specific drivers. # -obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \ +obj-y += access.o bus.o probe.o remove.o pci.o \ pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \ irq.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_SYSFS) += slot.o -obj-$(CONFIG_PCI_LEGACY) += legacy.o -CFLAGS_legacy.o += -Wno-deprecated-declarations +obj-$(CONFIG_PCI_QUIRKS) += quirks.o # Build PCI Express stuff if needed obj-$(CONFIG_PCIEPORTBUS) += pcie/ diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index cef28a79103..712250f5874 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -17,6 +17,52 @@ #include "pci.h" +void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, + unsigned int flags) +{ + struct pci_bus_resource *bus_res; + + bus_res = kzalloc(sizeof(struct pci_bus_resource), GFP_KERNEL); + if (!bus_res) { + dev_err(&bus->dev, "can't add %pR resource\n", res); + return; + } + + bus_res->res = res; + bus_res->flags = flags; + list_add_tail(&bus_res->list, &bus->resources); +} + +struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n) +{ + struct pci_bus_resource *bus_res; + + if (n < PCI_BRIDGE_RESOURCE_NUM) + return bus->resource[n]; + + n -= PCI_BRIDGE_RESOURCE_NUM; + list_for_each_entry(bus_res, &bus->resources, list) { + if (n-- == 0) + return bus_res->res; + } + return NULL; +} +EXPORT_SYMBOL_GPL(pci_bus_resource_n); + +void pci_bus_remove_resources(struct pci_bus *bus) +{ + struct pci_bus_resource *bus_res, *tmp; + int i; + + for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) + bus->resource[i] = 0; + + list_for_each_entry_safe(bus_res, tmp, &bus->resources, list) { + list_del(&bus_res->list); + kfree(bus_res); + } +} + /** * pci_bus_alloc_resource - allocate a resource from a parent bus * @bus: PCI bus @@ -36,11 +82,14 @@ int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, resource_size_t min, unsigned int type_mask, - void (*alignf)(void *, struct resource *, resource_size_t, - resource_size_t), + resource_size_t (*alignf)(void *, + const struct resource *, + resource_size_t, + resource_size_t), void *alignf_data) { int i, ret = -ENOMEM; + struct resource *r; resource_size_t max = -1; type_mask |= IORESOURCE_IO | IORESOURCE_MEM; @@ -49,8 +98,7 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, if (!(res->flags & IORESOURCE_MEM_64)) max = PCIBIOS_MAX_MEM_32; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *r = bus->resource[i]; + pci_bus_for_each_resource(bus, r, i) { if (!r) continue; diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index 4dd7114964a..efa9f2de51c 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -332,8 +332,6 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info->attention_status = 0; slot->hotplug_slot->info->latch_status = acpiphp_get_latch_status(slot->acpi_slot); slot->hotplug_slot->info->adapter_status = acpiphp_get_adapter_status(slot->acpi_slot); - slot->hotplug_slot->info->max_bus_speed = PCI_SPEED_UNKNOWN; - slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; acpiphp_slot->slot = slot; snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun); diff --git a/drivers/pci/hotplug/cpcihp_generic.c b/drivers/pci/hotplug/cpcihp_generic.c index 148fb463b81..fb3f84661bd 100644 --- a/drivers/pci/hotplug/cpcihp_generic.c +++ b/drivers/pci/hotplug/cpcihp_generic.c @@ -162,6 +162,7 @@ static int __init cpcihp_generic_init(void) dev = pci_get_slot(bus, PCI_DEVFN(bridge_slot, 0)); if(!dev || dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { err("Invalid bridge device %s", bridge); + pci_dev_put(dev); return -EINVAL; } bus = dev->subordinate; diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h index 9c6a9fd2681..d8ffc736680 100644 --- a/drivers/pci/hotplug/cpqphp.h +++ b/drivers/pci/hotplug/cpqphp.h @@ -310,8 +310,6 @@ struct controller { u8 first_slot; u8 add_support; u8 push_flag; - enum pci_bus_speed speed; - enum pci_bus_speed speed_capability; u8 push_button; /* 0 = no pushbutton, 1 = pushbutton present */ u8 slot_switch_type; /* 0 = no switch, 1 = switch present */ u8 defeature_PHP; /* 0 = PHP not supported, 1 = PHP supported */ diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 075b4f4b6e0..f184d1d2ecb 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -583,30 +583,6 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) return 0; } -static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - struct slot *slot = hotplug_slot->private; - struct controller *ctrl = slot->ctrl; - - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); - - *value = ctrl->speed_capability; - - return 0; -} - -static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - struct slot *slot = hotplug_slot->private; - struct controller *ctrl = slot->ctrl; - - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); - - *value = ctrl->speed; - - return 0; -} - static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = { .set_attention_status = set_attention_status, .enable_slot = process_SI, @@ -616,8 +592,6 @@ static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = { .get_attention_status = get_attention_status, .get_latch_status = get_latch_status, .get_adapter_status = get_adapter_status, - .get_max_bus_speed = get_max_bus_speed, - .get_cur_bus_speed = get_cur_bus_speed, }; #define SLOT_NAME_SIZE 10 @@ -629,6 +603,7 @@ static int ctrl_slot_setup(struct controller *ctrl, struct slot *slot; struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *hotplug_slot_info; + struct pci_bus *bus = ctrl->pci_bus; u8 number_of_slots; u8 slot_device; u8 slot_number; @@ -694,7 +669,7 @@ static int ctrl_slot_setup(struct controller *ctrl, slot->capabilities |= PCISLOT_64_BIT_SUPPORTED; if (is_slot66mhz(slot)) slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED; - if (ctrl->speed == PCI_SPEED_66MHz) + if (bus->cur_bus_speed == PCI_SPEED_66MHz) slot->capabilities |= PCISLOT_66_MHZ_OPERATION; ctrl_slot = @@ -844,6 +819,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) u32 rc; struct controller *ctrl; struct pci_func *func; + struct pci_bus *bus; int err; err = pci_enable_device(pdev); @@ -852,6 +828,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_name(pdev), err); return err; } + bus = pdev->subordinate; /* Need to read VID early b/c it's used to differentiate CPQ and INTC * discovery @@ -929,22 +906,22 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_read_config_byte(pdev, 0x41, &bus_cap); if (bus_cap & 0x80) { dbg("bus max supports 133MHz PCI-X\n"); - ctrl->speed_capability = PCI_SPEED_133MHz_PCIX; + bus->max_bus_speed = PCI_SPEED_133MHz_PCIX; break; } if (bus_cap & 0x40) { dbg("bus max supports 100MHz PCI-X\n"); - ctrl->speed_capability = PCI_SPEED_100MHz_PCIX; + bus->max_bus_speed = PCI_SPEED_100MHz_PCIX; break; } if (bus_cap & 20) { dbg("bus max supports 66MHz PCI-X\n"); - ctrl->speed_capability = PCI_SPEED_66MHz_PCIX; + bus->max_bus_speed = PCI_SPEED_66MHz_PCIX; break; } if (bus_cap & 10) { dbg("bus max supports 66MHz PCI\n"); - ctrl->speed_capability = PCI_SPEED_66MHz; + bus->max_bus_speed = PCI_SPEED_66MHz; break; } @@ -955,7 +932,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case PCI_SUB_HPC_ID: /* Original 6500/7000 implementation */ ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_33MHz; + bus->max_bus_speed = PCI_SPEED_33MHz; ctrl->push_button = 0; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -966,7 +943,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* First Pushbutton implementation */ ctrl->push_flag = 1; ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_33MHz; + bus->max_bus_speed = PCI_SPEED_33MHz; ctrl->push_button = 1; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -976,7 +953,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case PCI_SUB_HPC_ID_INTC: /* Third party (6500/7000) */ ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_33MHz; + bus->max_bus_speed = PCI_SPEED_33MHz; ctrl->push_button = 0; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -987,7 +964,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* First 66 Mhz implementation */ ctrl->push_flag = 1; ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_66MHz; + bus->max_bus_speed = PCI_SPEED_66MHz; ctrl->push_button = 1; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -998,7 +975,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* First PCI-X implementation, 100MHz */ ctrl->push_flag = 1; ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_100MHz_PCIX; + bus->max_bus_speed = PCI_SPEED_100MHz_PCIX; ctrl->push_button = 1; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -1015,9 +992,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case PCI_VENDOR_ID_INTEL: /* Check for speed capability (0=33, 1=66) */ if (subsystem_deviceid & 0x0001) - ctrl->speed_capability = PCI_SPEED_66MHz; + bus->max_bus_speed = PCI_SPEED_66MHz; else - ctrl->speed_capability = PCI_SPEED_33MHz; + bus->max_bus_speed = PCI_SPEED_33MHz; /* Check for push button */ if (subsystem_deviceid & 0x0002) @@ -1079,7 +1056,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pdev->bus->number); dbg("Hotplug controller capabilities:\n"); - dbg(" speed_capability %d\n", ctrl->speed_capability); + dbg(" speed_capability %d\n", bus->max_bus_speed); dbg(" slot_switch_type %s\n", ctrl->slot_switch_type ? "switch present" : "no switch"); dbg(" defeature_PHP %s\n", ctrl->defeature_PHP ? @@ -1142,7 +1119,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } /* Check for 66Mhz operation */ - ctrl->speed = get_controller_speed(ctrl); + bus->cur_bus_speed = get_controller_speed(ctrl); /******************************************************** diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index 0ff689afa75..e43908d9b5d 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -1130,12 +1130,13 @@ static int is_bridge(struct pci_func * func) static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot) { struct slot *slot; + struct pci_bus *bus = ctrl->pci_bus; u8 reg; u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER); u16 reg16; u32 leds = readl(ctrl->hpc_reg + LED_CONTROL); - if (ctrl->speed == adapter_speed) + if (bus->cur_bus_speed == adapter_speed) return 0; /* We don't allow freq/mode changes if we find another adapter running @@ -1152,7 +1153,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ * lower speed/mode, we allow the new adapter to function at * this rate if supported */ - if (ctrl->speed < adapter_speed) + if (bus->cur_bus_speed < adapter_speed) return 0; return 1; @@ -1161,20 +1162,20 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ /* If the controller doesn't support freq/mode changes and the * controller is running at a higher mode, we bail */ - if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability)) + if ((bus->cur_bus_speed > adapter_speed) && (!ctrl->pcix_speed_capability)) return 1; /* But we allow the adapter to run at a lower rate if possible */ - if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability)) + if ((bus->cur_bus_speed < adapter_speed) && (!ctrl->pcix_speed_capability)) return 0; /* We try to set the max speed supported by both the adapter and * controller */ - if (ctrl->speed_capability < adapter_speed) { - if (ctrl->speed == ctrl->speed_capability) + if (bus->max_bus_speed < adapter_speed) { + if (bus->cur_bus_speed == bus->max_bus_speed) return 0; - adapter_speed = ctrl->speed_capability; + adapter_speed = bus->max_bus_speed; } writel(0x0L, ctrl->hpc_reg + LED_CONTROL); @@ -1229,8 +1230,8 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ pci_write_config_byte(ctrl->pci_dev, 0x43, reg); /* Only if mode change...*/ - if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) || - ((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) + if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) || + ((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) set_SOGO(ctrl); wait_for_ctrl_irq(ctrl); @@ -1243,7 +1244,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ set_SOGO(ctrl); wait_for_ctrl_irq(ctrl); - ctrl->speed = adapter_speed; + bus->cur_bus_speed = adapter_speed; slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); info("Successfully changed frequency/mode for adapter in slot %d\n", @@ -1269,6 +1270,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ */ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) { + struct pci_bus *bus = ctrl->pci_bus; u8 hp_slot; u8 temp_byte; u8 adapter_speed; @@ -1309,7 +1311,7 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) wait_for_ctrl_irq (ctrl); adapter_speed = get_adapter_speed(ctrl, hp_slot); - if (ctrl->speed != adapter_speed) + if (bus->cur_bus_speed != adapter_speed) if (set_controller_speed(ctrl, adapter_speed, hp_slot)) rc = WRONG_BUS_FREQUENCY; @@ -1426,6 +1428,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) u32 temp_register = 0xFFFFFFFF; u32 rc = 0; struct pci_func *new_slot = NULL; + struct pci_bus *bus = ctrl->pci_bus; struct slot *p_slot; struct resource_lists res_lists; @@ -1456,7 +1459,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) wait_for_ctrl_irq (ctrl); adapter_speed = get_adapter_speed(ctrl, hp_slot); - if (ctrl->speed != adapter_speed) + if (bus->cur_bus_speed != adapter_speed) if (set_controller_speed(ctrl, adapter_speed, hp_slot)) rc = WRONG_BUS_FREQUENCY; diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index 7485ffda950..d934dd4fa87 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -395,89 +395,40 @@ static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 * value) return rc; } -static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) +static int get_max_bus_speed(struct slot *slot) { - int rc = -ENODEV; - struct slot *pslot; + int rc; u8 mode = 0; + enum pci_bus_speed speed; + struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus; - debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__, - hotplug_slot, value); + debug("%s - Entry slot[%p]\n", __func__, slot); ibmphp_lock_operations(); - - if (hotplug_slot) { - pslot = hotplug_slot->private; - if (pslot) { - rc = 0; - mode = pslot->supported_bus_mode; - *value = pslot->supported_speed; - switch (*value) { - case BUS_SPEED_33: - break; - case BUS_SPEED_66: - if (mode == BUS_MODE_PCIX) - *value += 0x01; - break; - case BUS_SPEED_100: - case BUS_SPEED_133: - *value = pslot->supported_speed + 0x01; - break; - default: - /* Note (will need to change): there would be soon 256, 512 also */ - rc = -ENODEV; - } - } - } - + mode = slot->supported_bus_mode; + speed = slot->supported_speed; ibmphp_unlock_operations(); - debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value); - return rc; -} -static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - int rc = -ENODEV; - struct slot *pslot; - u8 mode = 0; - - debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__, - hotplug_slot, value); - - ibmphp_lock_operations(); - - if (hotplug_slot) { - pslot = hotplug_slot->private; - if (pslot) { - rc = get_cur_bus_info(&pslot); - if (!rc) { - mode = pslot->bus_on->current_bus_mode; - *value = pslot->bus_on->current_speed; - switch (*value) { - case BUS_SPEED_33: - break; - case BUS_SPEED_66: - if (mode == BUS_MODE_PCIX) - *value += 0x01; - else if (mode == BUS_MODE_PCI) - ; - else - *value = PCI_SPEED_UNKNOWN; - break; - case BUS_SPEED_100: - case BUS_SPEED_133: - *value += 0x01; - break; - default: - /* Note of change: there would also be 256, 512 soon */ - rc = -ENODEV; - } - } - } + switch (speed) { + case BUS_SPEED_33: + break; + case BUS_SPEED_66: + if (mode == BUS_MODE_PCIX) + speed += 0x01; + break; + case BUS_SPEED_100: + case BUS_SPEED_133: + speed += 0x01; + break; + default: + /* Note (will need to change): there would be soon 256, 512 also */ + rc = -ENODEV; } - ibmphp_unlock_operations(); - debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value); + if (!rc) + bus->max_bus_speed = speed; + + debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed); return rc; } @@ -572,6 +523,7 @@ static int __init init_ops(void) if (slot_cur->bus_on->current_speed == 0xFF) if (get_cur_bus_info(&slot_cur)) return -1; + get_max_bus_speed(slot_cur); if (slot_cur->ctrl->options == 0xFF) if (get_hpc_options(slot_cur, &slot_cur->ctrl->options)) @@ -655,6 +607,7 @@ static int validate(struct slot *slot_cur, int opn) int ibmphp_update_slot_info(struct slot *slot_cur) { struct hotplug_slot_info *info; + struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus; int rc; u8 bus_speed; u8 mode; @@ -700,8 +653,7 @@ int ibmphp_update_slot_info(struct slot *slot_cur) bus_speed = PCI_SPEED_UNKNOWN; } - info->cur_bus_speed = bus_speed; - info->max_bus_speed = slot_cur->hotplug_slot->info->max_bus_speed; + bus->cur_bus_speed = bus_speed; // To do: bus_names rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info); @@ -1326,8 +1278,6 @@ struct hotplug_slot_ops ibmphp_hotplug_slot_ops = { .get_attention_status = get_attention_status, .get_latch_status = get_latch_status, .get_adapter_status = get_adapter_present, - .get_max_bus_speed = get_max_bus_speed, - .get_cur_bus_speed = get_cur_bus_speed, /* .get_max_adapter_speed = get_max_adapter_speed, .get_bus_name_status = get_bus_name, */ diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c index c1abac8ab5c..5becbdee402 100644 --- a/drivers/pci/hotplug/ibmphp_ebda.c +++ b/drivers/pci/hotplug/ibmphp_ebda.c @@ -245,7 +245,7 @@ static void __init print_ebda_hpc (void) int __init ibmphp_access_ebda (void) { - u8 format, num_ctlrs, rio_complete, hs_complete; + u8 format, num_ctlrs, rio_complete, hs_complete, ebda_sz; u16 ebda_seg, num_entries, next_offset, offset, blk_id, sub_addr, re, rc_id, re_id, base; int rc = 0; @@ -260,7 +260,16 @@ int __init ibmphp_access_ebda (void) iounmap (io_mem); debug ("returned ebda segment: %x\n", ebda_seg); - io_mem = ioremap(ebda_seg<<4, 1024); + io_mem = ioremap(ebda_seg<<4, 1); + if (!io_mem) + return -ENOMEM; + ebda_sz = readb(io_mem); + iounmap(io_mem); + debug("ebda size: %d(KiB)\n", ebda_sz); + if (ebda_sz == 0) + return -ENOMEM; + + io_mem = ioremap(ebda_seg<<4, (ebda_sz * 1024)); if (!io_mem ) return -ENOMEM; next_offset = 0x180; diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c index c7084f0eca5..1aaf3f32d3c 100644 --- a/drivers/pci/hotplug/ibmphp_hpc.c +++ b/drivers/pci/hotplug/ibmphp_hpc.c @@ -35,6 +35,7 @@ #include <linux/init.h> #include <linux/mutex.h> #include <linux/sched.h> +#include <linux/semaphore.h> #include <linux/kthread.h> #include "ibmphp.h" diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 38183a534b6..728b119f71a 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -64,32 +64,6 @@ static int debug; static LIST_HEAD(pci_hotplug_slot_list); static DEFINE_MUTEX(pci_hp_mutex); -/* these strings match up with the values in pci_bus_speed */ -static char *pci_bus_speed_strings[] = { - "33 MHz PCI", /* 0x00 */ - "66 MHz PCI", /* 0x01 */ - "66 MHz PCI-X", /* 0x02 */ - "100 MHz PCI-X", /* 0x03 */ - "133 MHz PCI-X", /* 0x04 */ - NULL, /* 0x05 */ - NULL, /* 0x06 */ - NULL, /* 0x07 */ - NULL, /* 0x08 */ - "66 MHz PCI-X 266", /* 0x09 */ - "100 MHz PCI-X 266", /* 0x0a */ - "133 MHz PCI-X 266", /* 0x0b */ - NULL, /* 0x0c */ - NULL, /* 0x0d */ - NULL, /* 0x0e */ - NULL, /* 0x0f */ - NULL, /* 0x10 */ - "66 MHz PCI-X 533", /* 0x11 */ - "100 MHz PCI-X 533", /* 0x12 */ - "133 MHz PCI-X 533", /* 0x13 */ - "2.5 GT/s PCIe", /* 0x14 */ - "5.0 GT/s PCIe", /* 0x15 */ -}; - #ifdef CONFIG_HOTPLUG_PCI_CPCI extern int cpci_hotplug_init(int debug); extern void cpci_hotplug_exit(void); @@ -118,8 +92,6 @@ GET_STATUS(power_status, u8) GET_STATUS(attention_status, u8) GET_STATUS(latch_status, u8) GET_STATUS(adapter_status, u8) -GET_STATUS(max_bus_speed, enum pci_bus_speed) -GET_STATUS(cur_bus_speed, enum pci_bus_speed) static ssize_t power_read_file(struct pci_slot *slot, char *buf) { @@ -263,60 +235,6 @@ static struct pci_slot_attribute hotplug_slot_attr_presence = { .show = presence_read_file, }; -static char *unknown_speed = "Unknown bus speed"; - -static ssize_t max_bus_speed_read_file(struct pci_slot *slot, char *buf) -{ - char *speed_string; - int retval; - enum pci_bus_speed value; - - retval = get_max_bus_speed(slot->hotplug, &value); - if (retval) - goto exit; - - if (value == PCI_SPEED_UNKNOWN) - speed_string = unknown_speed; - else - speed_string = pci_bus_speed_strings[value]; - - retval = sprintf (buf, "%s\n", speed_string); - -exit: - return retval; -} - -static struct pci_slot_attribute hotplug_slot_attr_max_bus_speed = { - .attr = {.name = "max_bus_speed", .mode = S_IFREG | S_IRUGO}, - .show = max_bus_speed_read_file, -}; - -static ssize_t cur_bus_speed_read_file(struct pci_slot *slot, char *buf) -{ - char *speed_string; - int retval; - enum pci_bus_speed value; - - retval = get_cur_bus_speed(slot->hotplug, &value); - if (retval) - goto exit; - - if (value == PCI_SPEED_UNKNOWN) - speed_string = unknown_speed; - else - speed_string = pci_bus_speed_strings[value]; - - retval = sprintf (buf, "%s\n", speed_string); - -exit: - return retval; -} - -static struct pci_slot_attribute hotplug_slot_attr_cur_bus_speed = { - .attr = {.name = "cur_bus_speed", .mode = S_IFREG | S_IRUGO}, - .show = cur_bus_speed_read_file, -}; - static ssize_t test_write_file(struct pci_slot *pci_slot, const char *buf, size_t count) { @@ -391,26 +309,6 @@ static bool has_adapter_file(struct pci_slot *pci_slot) return false; } -static bool has_max_bus_speed_file(struct pci_slot *pci_slot) -{ - struct hotplug_slot *slot = pci_slot->hotplug; - if ((!slot) || (!slot->ops)) - return false; - if (slot->ops->get_max_bus_speed) - return true; - return false; -} - -static bool has_cur_bus_speed_file(struct pci_slot *pci_slot) -{ - struct hotplug_slot *slot = pci_slot->hotplug; - if ((!slot) || (!slot->ops)) - return false; - if (slot->ops->get_cur_bus_speed) - return true; - return false; -} - static bool has_test_file(struct pci_slot *pci_slot) { struct hotplug_slot *slot = pci_slot->hotplug; @@ -456,20 +354,6 @@ static int fs_add_slot(struct pci_slot *slot) goto exit_adapter; } - if (has_max_bus_speed_file(slot)) { - retval = sysfs_create_file(&slot->kobj, - &hotplug_slot_attr_max_bus_speed.attr); - if (retval) - goto exit_max_speed; - } - - if (has_cur_bus_speed_file(slot)) { - retval = sysfs_create_file(&slot->kobj, - &hotplug_slot_attr_cur_bus_speed.attr); - if (retval) - goto exit_cur_speed; - } - if (has_test_file(slot)) { retval = sysfs_create_file(&slot->kobj, &hotplug_slot_attr_test.attr); @@ -480,14 +364,6 @@ static int fs_add_slot(struct pci_slot *slot) goto exit; exit_test: - if (has_cur_bus_speed_file(slot)) - sysfs_remove_file(&slot->kobj, - &hotplug_slot_attr_cur_bus_speed.attr); -exit_cur_speed: - if (has_max_bus_speed_file(slot)) - sysfs_remove_file(&slot->kobj, - &hotplug_slot_attr_max_bus_speed.attr); -exit_max_speed: if (has_adapter_file(slot)) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr); @@ -523,14 +399,6 @@ static void fs_remove_slot(struct pci_slot *slot) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr); - if (has_max_bus_speed_file(slot)) - sysfs_remove_file(&slot->kobj, - &hotplug_slot_attr_max_bus_speed.attr); - - if (has_cur_bus_speed_file(slot)) - sysfs_remove_file(&slot->kobj, - &hotplug_slot_attr_cur_bus_speed.attr); - if (has_test_file(slot)) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 5674b2075bd..920f820edf8 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -69,8 +69,6 @@ static int get_power_status (struct hotplug_slot *slot, u8 *value); static int get_attention_status (struct hotplug_slot *slot, u8 *value); static int get_latch_status (struct hotplug_slot *slot, u8 *value); static int get_adapter_status (struct hotplug_slot *slot, u8 *value); -static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); -static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); /** * release_slot - free up the memory used by a slot @@ -113,8 +111,6 @@ static int init_slot(struct controller *ctrl) ops->disable_slot = disable_slot; ops->get_power_status = get_power_status; ops->get_adapter_status = get_adapter_status; - ops->get_max_bus_speed = get_max_bus_speed; - ops->get_cur_bus_speed = get_cur_bus_speed; if (MRL_SENS(ctrl)) ops->get_latch_status = get_latch_status; if (ATTN_LED(ctrl)) { @@ -227,27 +223,6 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) return pciehp_get_adapter_status(slot, value); } -static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, - enum pci_bus_speed *value) -{ - struct slot *slot = hotplug_slot->private; - - ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", - __func__, slot_name(slot)); - - return pciehp_get_max_link_speed(slot, value); -} - -static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - struct slot *slot = hotplug_slot->private; - - ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", - __func__, slot_name(slot)); - - return pciehp_get_cur_link_speed(slot, value); -} - static int pciehp_probe(struct pcie_device *dev) { int rc; diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index d6ac1b261dd..9a7f247e8ac 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -341,6 +341,7 @@ void pciehp_queue_pushbutton_work(struct work_struct *work) p_slot->state = POWERON_STATE; break; default: + kfree(info); goto out; } queue_work(pciehp_wq, &info->work); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 10040d58c8e..40b48f569b1 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -492,6 +492,7 @@ int pciehp_power_on_slot(struct slot * slot) u16 slot_cmd; u16 cmd_mask; u16 slot_status; + u16 lnk_status; int retval = 0; /* Clear sticky power-fault bit from previous power failures */ @@ -523,6 +524,14 @@ int pciehp_power_on_slot(struct slot * slot) ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd); + retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); + if (retval) { + ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n", + __func__); + return retval; + } + pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); + return retval; } @@ -610,37 +619,6 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) return IRQ_HANDLED; } -int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *value) -{ - struct controller *ctrl = slot->ctrl; - enum pcie_link_speed lnk_speed; - u32 lnk_cap; - int retval = 0; - - retval = pciehp_readl(ctrl, PCI_EXP_LNKCAP, &lnk_cap); - if (retval) { - ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__); - return retval; - } - - switch (lnk_cap & 0x000F) { - case 1: - lnk_speed = PCIE_2_5GB; - break; - case 2: - lnk_speed = PCIE_5_0GB; - break; - default: - lnk_speed = PCIE_LNK_SPEED_UNKNOWN; - break; - } - - *value = lnk_speed; - ctrl_dbg(ctrl, "Max link speed = %d\n", lnk_speed); - - return retval; -} - int pciehp_get_max_lnk_width(struct slot *slot, enum pcie_link_width *value) { @@ -691,38 +669,6 @@ int pciehp_get_max_lnk_width(struct slot *slot, return retval; } -int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *value) -{ - struct controller *ctrl = slot->ctrl; - enum pcie_link_speed lnk_speed = PCI_SPEED_UNKNOWN; - int retval = 0; - u16 lnk_status; - - retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); - if (retval) { - ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n", - __func__); - return retval; - } - - switch (lnk_status & PCI_EXP_LNKSTA_CLS) { - case 1: - lnk_speed = PCIE_2_5GB; - break; - case 2: - lnk_speed = PCIE_5_0GB; - break; - default: - lnk_speed = PCIE_LNK_SPEED_UNKNOWN; - break; - } - - *value = lnk_speed; - ctrl_dbg(ctrl, "Current link speed = %d\n", lnk_speed); - - return retval; -} - int pciehp_get_cur_lnk_width(struct slot *slot, enum pcie_link_width *value) { diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index 21733108add..0a16444c14c 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -53,17 +53,15 @@ static int __ref pciehp_add_bridge(struct pci_dev *dev) busnr = pci_scan_bridge(parent, dev, busnr, pass); if (!dev->subordinate) return -1; - pci_bus_size_bridges(dev->subordinate); - pci_bus_assign_resources(parent); - pci_enable_bridges(parent); - pci_bus_add_devices(parent); + return 0; } int pciehp_configure_device(struct slot *p_slot) { struct pci_dev *dev; - struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate; + struct pci_dev *bridge = p_slot->ctrl->pcie->port; + struct pci_bus *parent = bridge->subordinate; int num, fn; struct controller *ctrl = p_slot->ctrl; @@ -96,12 +94,25 @@ int pciehp_configure_device(struct slot *p_slot) (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) { pciehp_add_bridge(dev); } + pci_dev_put(dev); + } + + pci_assign_unassigned_bridge_resources(bridge); + + for (fn = 0; fn < 8; fn++) { + dev = pci_get_slot(parent, PCI_DEVFN(0, fn)); + if (!dev) + continue; + if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { + pci_dev_put(dev); + continue; + } pci_configure_slot(dev); pci_dev_put(dev); } - pci_bus_assign_resources(parent); pci_bus_add_devices(parent); + return 0; } diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index c159223389e..dcaae725fd7 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -130,10 +130,9 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 * value) return 0; } -static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) +static enum pci_bus_speed get_max_bus_speed(struct slot *slot) { - struct slot *slot = (struct slot *)hotplug_slot->private; - + enum pci_bus_speed speed; switch (slot->type) { case 1: case 2: @@ -141,30 +140,30 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_spe case 4: case 5: case 6: - *value = PCI_SPEED_33MHz; /* speed for case 1-6 */ + speed = PCI_SPEED_33MHz; /* speed for case 1-6 */ break; case 7: case 8: - *value = PCI_SPEED_66MHz; + speed = PCI_SPEED_66MHz; break; case 11: case 14: - *value = PCI_SPEED_66MHz_PCIX; + speed = PCI_SPEED_66MHz_PCIX; break; case 12: case 15: - *value = PCI_SPEED_100MHz_PCIX; + speed = PCI_SPEED_100MHz_PCIX; break; case 13: case 16: - *value = PCI_SPEED_133MHz_PCIX; + speed = PCI_SPEED_133MHz_PCIX; break; default: - *value = PCI_SPEED_UNKNOWN; + speed = PCI_SPEED_UNKNOWN; break; - } - return 0; + + return speed; } static int get_children_props(struct device_node *dn, const int **drc_indexes, @@ -408,6 +407,8 @@ static int enable_slot(struct hotplug_slot *hotplug_slot) slot->state = NOT_VALID; return -EINVAL; } + + slot->bus->max_bus_speed = get_max_bus_speed(slot); return 0; } @@ -429,7 +430,6 @@ struct hotplug_slot_ops rpaphp_hotplug_slot_ops = { .get_power_status = get_power_status, .get_attention_status = get_attention_status, .get_adapter_status = get_adapter_status, - .get_max_bus_speed = get_max_bus_speed, }; module_init(rpaphp_init); diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 8e210cd76e5..d2627e1c3ac 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -333,8 +333,6 @@ struct hpc_ops { int (*set_attention_status)(struct slot *slot, u8 status); int (*get_latch_status)(struct slot *slot, u8 *status); int (*get_adapter_status)(struct slot *slot, u8 *status); - int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed); - int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed); int (*get_adapter_speed)(struct slot *slot, enum pci_bus_speed *speed); int (*get_mode1_ECC_cap)(struct slot *slot, u8 *mode); int (*get_prog_int)(struct slot *slot, u8 *prog_int); diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 8a520a3d0f5..a5062297f48 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -65,8 +65,6 @@ static int get_power_status (struct hotplug_slot *slot, u8 *value); static int get_attention_status (struct hotplug_slot *slot, u8 *value); static int get_latch_status (struct hotplug_slot *slot, u8 *value); static int get_adapter_status (struct hotplug_slot *slot, u8 *value); -static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); -static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); static struct hotplug_slot_ops shpchp_hotplug_slot_ops = { .set_attention_status = set_attention_status, @@ -76,8 +74,6 @@ static struct hotplug_slot_ops shpchp_hotplug_slot_ops = { .get_attention_status = get_attention_status, .get_latch_status = get_latch_status, .get_adapter_status = get_adapter_status, - .get_max_bus_speed = get_max_bus_speed, - .get_cur_bus_speed = get_cur_bus_speed, }; /** @@ -279,37 +275,6 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value) return 0; } -static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, - enum pci_bus_speed *value) -{ - struct slot *slot = get_slot(hotplug_slot); - int retval; - - ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", - __func__, slot_name(slot)); - - retval = slot->hpc_ops->get_max_bus_speed(slot, value); - if (retval < 0) - *value = PCI_SPEED_UNKNOWN; - - return 0; -} - -static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - struct slot *slot = get_slot(hotplug_slot); - int retval; - - ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", - __func__, slot_name(slot)); - - retval = slot->hpc_ops->get_cur_bus_speed(slot, value); - if (retval < 0) - *value = PCI_SPEED_UNKNOWN; - - return 0; -} - static int is_shpc_capable(struct pci_dev *dev) { if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device == diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index b8ab2796e66..3bba0c0888f 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -285,17 +285,8 @@ static int board_added(struct slot *p_slot) return WRONG_BUS_FREQUENCY; } - rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp); - if (rc) { - ctrl_err(ctrl, "Can't get bus operation speed\n"); - return WRONG_BUS_FREQUENCY; - } - - rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp); - if (rc) { - ctrl_err(ctrl, "Can't get max bus operation speed\n"); - msp = bsp; - } + bsp = ctrl->pci_dev->bus->cur_bus_speed; + msp = ctrl->pci_dev->bus->max_bus_speed; /* Check if there are other slots or devices on the same bus */ if (!list_empty(&ctrl->pci_dev->subordinate->devices)) @@ -462,6 +453,7 @@ void shpchp_queue_pushbutton_work(struct work_struct *work) p_slot->state = POWERON_STATE; break; default: + kfree(info); goto out; } queue_work(shpchp_wq, &info->work); diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 86dc3984776..5f5e8d2e355 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -660,6 +660,75 @@ static int hpc_slot_disable(struct slot * slot) return retval; } +static int shpc_get_cur_bus_speed(struct controller *ctrl) +{ + int retval = 0; + struct pci_bus *bus = ctrl->pci_dev->subordinate; + enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; + u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG); + u8 pi = shpc_readb(ctrl, PROG_INTERFACE); + u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7); + + if ((pi == 1) && (speed_mode > 4)) { + retval = -ENODEV; + goto out; + } + + switch (speed_mode) { + case 0x0: + bus_speed = PCI_SPEED_33MHz; + break; + case 0x1: + bus_speed = PCI_SPEED_66MHz; + break; + case 0x2: + bus_speed = PCI_SPEED_66MHz_PCIX; + break; + case 0x3: + bus_speed = PCI_SPEED_100MHz_PCIX; + break; + case 0x4: + bus_speed = PCI_SPEED_133MHz_PCIX; + break; + case 0x5: + bus_speed = PCI_SPEED_66MHz_PCIX_ECC; + break; + case 0x6: + bus_speed = PCI_SPEED_100MHz_PCIX_ECC; + break; + case 0x7: + bus_speed = PCI_SPEED_133MHz_PCIX_ECC; + break; + case 0x8: + bus_speed = PCI_SPEED_66MHz_PCIX_266; + break; + case 0x9: + bus_speed = PCI_SPEED_100MHz_PCIX_266; + break; + case 0xa: + bus_speed = PCI_SPEED_133MHz_PCIX_266; + break; + case 0xb: + bus_speed = PCI_SPEED_66MHz_PCIX_533; + break; + case 0xc: + bus_speed = PCI_SPEED_100MHz_PCIX_533; + break; + case 0xd: + bus_speed = PCI_SPEED_133MHz_PCIX_533; + break; + default: + retval = -ENODEV; + break; + } + + out: + bus->cur_bus_speed = bus_speed; + dbg("Current bus speed = %d\n", bus_speed); + return retval; +} + + static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) { int retval; @@ -720,6 +789,8 @@ static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) retval = shpc_write_cmd(slot, 0, cmd); if (retval) ctrl_err(ctrl, "%s: Write command failed!\n", __func__); + else + shpc_get_cur_bus_speed(ctrl); return retval; } @@ -803,10 +874,10 @@ static irqreturn_t shpc_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) +static int shpc_get_max_bus_speed(struct controller *ctrl) { int retval = 0; - struct controller *ctrl = slot->ctrl; + struct pci_bus *bus = ctrl->pci_dev->subordinate; enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; u8 pi = shpc_readb(ctrl, PROG_INTERFACE); u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1); @@ -842,79 +913,12 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) retval = -ENODEV; } - *value = bus_speed; + bus->max_bus_speed = bus_speed; ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed); return retval; } -static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value) -{ - int retval = 0; - struct controller *ctrl = slot->ctrl; - enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; - u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG); - u8 pi = shpc_readb(ctrl, PROG_INTERFACE); - u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7); - - if ((pi == 1) && (speed_mode > 4)) { - *value = PCI_SPEED_UNKNOWN; - return -ENODEV; - } - - switch (speed_mode) { - case 0x0: - *value = PCI_SPEED_33MHz; - break; - case 0x1: - *value = PCI_SPEED_66MHz; - break; - case 0x2: - *value = PCI_SPEED_66MHz_PCIX; - break; - case 0x3: - *value = PCI_SPEED_100MHz_PCIX; - break; - case 0x4: - *value = PCI_SPEED_133MHz_PCIX; - break; - case 0x5: - *value = PCI_SPEED_66MHz_PCIX_ECC; - break; - case 0x6: - *value = PCI_SPEED_100MHz_PCIX_ECC; - break; - case 0x7: - *value = PCI_SPEED_133MHz_PCIX_ECC; - break; - case 0x8: - *value = PCI_SPEED_66MHz_PCIX_266; - break; - case 0x9: - *value = PCI_SPEED_100MHz_PCIX_266; - break; - case 0xa: - *value = PCI_SPEED_133MHz_PCIX_266; - break; - case 0xb: - *value = PCI_SPEED_66MHz_PCIX_533; - break; - case 0xc: - *value = PCI_SPEED_100MHz_PCIX_533; - break; - case 0xd: - *value = PCI_SPEED_133MHz_PCIX_533; - break; - default: - *value = PCI_SPEED_UNKNOWN; - retval = -ENODEV; - break; - } - - ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed); - return retval; -} - static struct hpc_ops shpchp_hpc_ops = { .power_on_slot = hpc_power_on_slot, .slot_enable = hpc_slot_enable, @@ -926,8 +930,6 @@ static struct hpc_ops shpchp_hpc_ops = { .get_latch_status = hpc_get_latch_status, .get_adapter_status = hpc_get_adapter_status, - .get_max_bus_speed = hpc_get_max_bus_speed, - .get_cur_bus_speed = hpc_get_cur_bus_speed, .get_adapter_speed = hpc_get_adapter_speed, .get_mode1_ECC_cap = hpc_get_mode1_ECC_cap, .get_prog_int = hpc_get_prog_int, @@ -1086,6 +1088,9 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) } ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq); + shpc_get_max_bus_speed(ctrl); + shpc_get_cur_bus_speed(ctrl); + /* * If this is the first controller to be initialized, * initialize the shpchpd work queue diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c index 29fa9d26ada..071b7dc0094 100644 --- a/drivers/pci/hotplug/shpchp_sysfs.c +++ b/drivers/pci/hotplug/shpchp_sysfs.c @@ -47,8 +47,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha bus = pdev->subordinate; out += sprintf(buf, "Free resources: memory\n"); - for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { - res = bus->resource[index]; + pci_bus_for_each_resource(bus, res, index) { if (res && (res->flags & IORESOURCE_MEM) && !(res->flags & IORESOURCE_PREFETCH)) { out += sprintf(out, "start = %8.8llx, " @@ -58,8 +57,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha } } out += sprintf(out, "Free resources: prefetchable memory\n"); - for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { - res = bus->resource[index]; + pci_bus_for_each_resource(bus, res, index) { if (res && (res->flags & IORESOURCE_MEM) && (res->flags & IORESOURCE_PREFETCH)) { out += sprintf(out, "start = %8.8llx, " @@ -69,8 +67,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha } } out += sprintf(out, "Free resources: IO\n"); - for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { - res = bus->resource[index]; + pci_bus_for_each_resource(bus, res, index) { if (res && (res->flags & IORESOURCE_IO)) { out += sprintf(out, "start = %8.8llx, " "length = %8.8llx\n", diff --git a/drivers/pci/legacy.c b/drivers/pci/legacy.c deleted file mode 100644 index 871f65c1593..00000000000 --- a/drivers/pci/legacy.c +++ /dev/null @@ -1,34 +0,0 @@ -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include "pci.h" - -/** - * pci_find_device - begin or continue searching for a PCI device by vendor/device id - * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids - * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids - * @from: Previous PCI device found in search, or %NULL for new search. - * - * Iterates through the list of known PCI devices. If a PCI device is found - * with a matching @vendor and @device, a pointer to its device structure is - * returned. Otherwise, %NULL is returned. - * A new search is initiated by passing %NULL as the @from argument. - * Otherwise if @from is not %NULL, searches continue from next device - * on the global list. - * - * NOTE: Do not use this function any more; use pci_get_device() instead, as - * the PCI device returned by this function can disappear at any moment in - * time. - */ -struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device, - struct pci_dev *from) -{ - struct pci_dev *pdev; - - pci_dev_get(from); - pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from); - pci_dev_put(pdev); - return pdev; -} -EXPORT_SYMBOL(pci_find_device); diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 7e2829538a4..c0c73913833 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -16,8 +16,144 @@ #include <acpi/acpi_bus.h> #include <linux/pci-acpi.h> +#include <linux/pm_runtime.h> #include "pci.h" +static DEFINE_MUTEX(pci_acpi_pm_notify_mtx); + +/** + * pci_acpi_wake_bus - Wake-up notification handler for root buses. + * @handle: ACPI handle of a device the notification is for. + * @event: Type of the signaled event. + * @context: PCI root bus to wake up devices on. + */ +static void pci_acpi_wake_bus(acpi_handle handle, u32 event, void *context) +{ + struct pci_bus *pci_bus = context; + + if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_bus) + pci_pme_wakeup_bus(pci_bus); +} + +/** + * pci_acpi_wake_dev - Wake-up notification handler for PCI devices. + * @handle: ACPI handle of a device the notification is for. + * @event: Type of the signaled event. + * @context: PCI device object to wake up. + */ +static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context) +{ + struct pci_dev *pci_dev = context; + + if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) { + pci_check_pme_status(pci_dev); + pm_runtime_resume(&pci_dev->dev); + if (pci_dev->subordinate) + pci_pme_wakeup_bus(pci_dev->subordinate); + } +} + +/** + * add_pm_notifier - Register PM notifier for given ACPI device. + * @dev: ACPI device to add the notifier for. + * @context: PCI device or bus to check for PME status if an event is signaled. + * + * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of + * PM wake-up events. For example, wake-up events may be generated for bridges + * if one of the devices below the bridge is signaling PME, even if the bridge + * itself doesn't have a wake-up GPE associated with it. + */ +static acpi_status add_pm_notifier(struct acpi_device *dev, + acpi_notify_handler handler, + void *context) +{ + acpi_status status = AE_ALREADY_EXISTS; + + mutex_lock(&pci_acpi_pm_notify_mtx); + + if (dev->wakeup.flags.notifier_present) + goto out; + + status = acpi_install_notify_handler(dev->handle, + ACPI_SYSTEM_NOTIFY, + handler, context); + if (ACPI_FAILURE(status)) + goto out; + + dev->wakeup.flags.notifier_present = true; + + out: + mutex_unlock(&pci_acpi_pm_notify_mtx); + return status; +} + +/** + * remove_pm_notifier - Unregister PM notifier from given ACPI device. + * @dev: ACPI device to remove the notifier from. + */ +static acpi_status remove_pm_notifier(struct acpi_device *dev, + acpi_notify_handler handler) +{ + acpi_status status = AE_BAD_PARAMETER; + + mutex_lock(&pci_acpi_pm_notify_mtx); + + if (!dev->wakeup.flags.notifier_present) + goto out; + + status = acpi_remove_notify_handler(dev->handle, + ACPI_SYSTEM_NOTIFY, + handler); + if (ACPI_FAILURE(status)) + goto out; + + dev->wakeup.flags.notifier_present = false; + + out: + mutex_unlock(&pci_acpi_pm_notify_mtx); + return status; +} + +/** + * pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus. + * @dev: ACPI device to add the notifier for. + * @pci_bus: PCI bus to walk checking for PME status if an event is signaled. + */ +acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev, + struct pci_bus *pci_bus) +{ + return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus); +} + +/** + * pci_acpi_remove_bus_pm_notifier - Unregister PCI bus PM notifier. + * @dev: ACPI device to remove the notifier from. + */ +acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev) +{ + return remove_pm_notifier(dev, pci_acpi_wake_bus); +} + +/** + * pci_acpi_add_pm_notifier - Register PM notifier for given PCI device. + * @dev: ACPI device to add the notifier for. + * @pci_dev: PCI device to check for the PME status if an event is signaled. + */ +acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, + struct pci_dev *pci_dev) +{ + return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev); +} + +/** + * pci_acpi_remove_pm_notifier - Unregister PCI device PM notifier. + * @dev: ACPI device to remove the notifier from. + */ +acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev) +{ + return remove_pm_notifier(dev, pci_acpi_wake_dev); +} + /* * _SxD returns the D-state with the highest power * (lowest D-state number) supported in the S-state "x". @@ -131,12 +267,87 @@ static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable) return 0; } +/** + * acpi_dev_run_wake - Enable/disable wake-up for given device. + * @phys_dev: Device to enable/disable the platform to wake-up the system for. + * @enable: Whether enable or disable the wake-up functionality. + * + * Find the ACPI device object corresponding to @pci_dev and try to + * enable/disable the GPE associated with it. + */ +static int acpi_dev_run_wake(struct device *phys_dev, bool enable) +{ + struct acpi_device *dev; + acpi_handle handle; + int error = -ENODEV; + + if (!device_run_wake(phys_dev)) + return -EINVAL; + + handle = DEVICE_ACPI_HANDLE(phys_dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) { + dev_dbg(phys_dev, "ACPI handle has no context in %s!\n", + __func__); + return -ENODEV; + } + + if (enable) { + if (!dev->wakeup.run_wake_count++) { + acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0); + acpi_enable_gpe(dev->wakeup.gpe_device, + dev->wakeup.gpe_number, + ACPI_GPE_TYPE_RUNTIME); + } + } else if (dev->wakeup.run_wake_count > 0) { + if (!--dev->wakeup.run_wake_count) { + acpi_disable_gpe(dev->wakeup.gpe_device, + dev->wakeup.gpe_number, + ACPI_GPE_TYPE_RUNTIME); + acpi_disable_wakeup_device_power(dev); + } + } else { + error = -EALREADY; + } + + return error; +} + +static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable) +{ + while (bus->parent) { + struct pci_dev *bridge = bus->self; + + if (bridge->pme_interrupt) + return; + if (!acpi_dev_run_wake(&bridge->dev, enable)) + return; + bus = bus->parent; + } + + /* We have reached the root bus. */ + if (bus->bridge) + acpi_dev_run_wake(bus->bridge, enable); +} + +static int acpi_pci_run_wake(struct pci_dev *dev, bool enable) +{ + if (dev->pme_interrupt) + return 0; + + if (!acpi_dev_run_wake(&dev->dev, enable)) + return 0; + + acpi_pci_propagate_run_wake(dev->bus, enable); + return 0; +} + static struct pci_platform_pm_ops acpi_pci_platform_pm = { .is_manageable = acpi_pci_power_manageable, .set_state = acpi_pci_set_power_state, .choose_state = acpi_pci_choose_state, .can_wakeup = acpi_pci_can_wakeup, .sleep_wake = acpi_pci_sleep_wake, + .run_wake = acpi_pci_run_wake, }; /* ACPI bus type */ diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index e5d47be3c6d..f9a0aec3abc 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -17,6 +17,7 @@ #include <linux/slab.h> #include <linux/sched.h> #include <linux/cpu.h> +#include <linux/pm_runtime.h> #include "pci.h" struct pci_dynid { @@ -404,6 +405,35 @@ static void pci_device_shutdown(struct device *dev) pci_msix_shutdown(pci_dev); } +#ifdef CONFIG_PM_OPS + +/* Auxiliary functions used for system resume and run-time resume. */ + +/** + * pci_restore_standard_config - restore standard config registers of PCI device + * @pci_dev: PCI device to handle + */ +static int pci_restore_standard_config(struct pci_dev *pci_dev) +{ + pci_update_current_state(pci_dev, PCI_UNKNOWN); + + if (pci_dev->current_state != PCI_D0) { + int error = pci_set_power_state(pci_dev, PCI_D0); + if (error) + return error; + } + + return pci_restore_state(pci_dev); +} + +static void pci_pm_default_resume_early(struct pci_dev *pci_dev) +{ + pci_restore_standard_config(pci_dev); + pci_fixup_device(pci_fixup_resume_early, pci_dev); +} + +#endif + #ifdef CONFIG_PM_SLEEP /* @@ -520,29 +550,6 @@ static int pci_legacy_resume(struct device *dev) /* Auxiliary functions used by the new power management framework */ -/** - * pci_restore_standard_config - restore standard config registers of PCI device - * @pci_dev: PCI device to handle - */ -static int pci_restore_standard_config(struct pci_dev *pci_dev) -{ - pci_update_current_state(pci_dev, PCI_UNKNOWN); - - if (pci_dev->current_state != PCI_D0) { - int error = pci_set_power_state(pci_dev, PCI_D0); - if (error) - return error; - } - - return pci_restore_state(pci_dev); -} - -static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev) -{ - pci_restore_standard_config(pci_dev); - pci_fixup_device(pci_fixup_resume_early, pci_dev); -} - static void pci_pm_default_resume(struct pci_dev *pci_dev) { pci_fixup_device(pci_fixup_resume, pci_dev); @@ -581,6 +588,17 @@ static int pci_pm_prepare(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + /* + * PCI devices suspended at run time need to be resumed at this + * point, because in general it is necessary to reconfigure them for + * system suspend. Namely, if the device is supposed to wake up the + * system from the sleep state, we may need to reconfigure it for this + * purpose. In turn, if the device is not supposed to wake up the + * system from the sleep state, we'll have to prevent it from signaling + * wake-up. + */ + pm_runtime_resume(dev); + if (drv && drv->pm && drv->pm->prepare) error = drv->pm->prepare(dev); @@ -595,6 +613,13 @@ static void pci_pm_complete(struct device *dev) drv->pm->complete(dev); } +#else /* !CONFIG_PM_SLEEP */ + +#define pci_pm_prepare NULL +#define pci_pm_complete NULL + +#endif /* !CONFIG_PM_SLEEP */ + #ifdef CONFIG_SUSPEND static int pci_pm_suspend(struct device *dev) @@ -681,7 +706,7 @@ static int pci_pm_resume_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; - pci_pm_default_resume_noirq(pci_dev); + pci_pm_default_resume_early(pci_dev); if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); @@ -879,7 +904,7 @@ static int pci_pm_restore_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; - pci_pm_default_resume_noirq(pci_dev); + pci_pm_default_resume_early(pci_dev); if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); @@ -931,6 +956,84 @@ static int pci_pm_restore(struct device *dev) #endif /* !CONFIG_HIBERNATION */ +#ifdef CONFIG_PM_RUNTIME + +static int pci_pm_runtime_suspend(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + pci_power_t prev = pci_dev->current_state; + int error; + + if (!pm || !pm->runtime_suspend) + return -ENOSYS; + + error = pm->runtime_suspend(dev); + suspend_report_result(pm->runtime_suspend, error); + if (error) + return error; + + pci_fixup_device(pci_fixup_suspend, pci_dev); + + if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0 + && pci_dev->current_state != PCI_UNKNOWN) { + WARN_ONCE(pci_dev->current_state != prev, + "PCI PM: State of device not saved by %pF\n", + pm->runtime_suspend); + return 0; + } + + if (!pci_dev->state_saved) + pci_save_state(pci_dev); + + pci_finish_runtime_suspend(pci_dev); + + return 0; +} + +static int pci_pm_runtime_resume(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + if (!pm || !pm->runtime_resume) + return -ENOSYS; + + pci_pm_default_resume_early(pci_dev); + __pci_enable_wake(pci_dev, PCI_D0, true, false); + pci_fixup_device(pci_fixup_resume, pci_dev); + + return pm->runtime_resume(dev); +} + +static int pci_pm_runtime_idle(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + if (!pm) + return -ENOSYS; + + if (pm->runtime_idle) { + int ret = pm->runtime_idle(dev); + if (ret) + return ret; + } + + pm_runtime_suspend(dev); + + return 0; +} + +#else /* !CONFIG_PM_RUNTIME */ + +#define pci_pm_runtime_suspend NULL +#define pci_pm_runtime_resume NULL +#define pci_pm_runtime_idle NULL + +#endif /* !CONFIG_PM_RUNTIME */ + +#ifdef CONFIG_PM_OPS + const struct dev_pm_ops pci_dev_pm_ops = { .prepare = pci_pm_prepare, .complete = pci_pm_complete, @@ -946,15 +1049,18 @@ const struct dev_pm_ops pci_dev_pm_ops = { .thaw_noirq = pci_pm_thaw_noirq, .poweroff_noirq = pci_pm_poweroff_noirq, .restore_noirq = pci_pm_restore_noirq, + .runtime_suspend = pci_pm_runtime_suspend, + .runtime_resume = pci_pm_runtime_resume, + .runtime_idle = pci_pm_runtime_idle, }; #define PCI_PM_OPS_PTR (&pci_dev_pm_ops) -#else /* !CONFIG_PM_SLEEP */ +#else /* !COMFIG_PM_OPS */ #define PCI_PM_OPS_PTR NULL -#endif /* !CONFIG_PM_SLEEP */ +#endif /* !COMFIG_PM_OPS */ /** * __pci_register_driver - register a new pci driver diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 315fea47e78..f4a2738bf0b 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -19,8 +19,8 @@ #include <linux/pci-aspm.h> #include <linux/pm_wakeup.h> #include <linux/interrupt.h> -#include <asm/dma.h> /* isa_dma_bridge_buggy */ #include <linux/device.h> +#include <linux/pm_runtime.h> #include <asm/setup.h> #include "pci.h" @@ -29,6 +29,12 @@ const char *pci_power_names[] = { }; EXPORT_SYMBOL_GPL(pci_power_names); +int isa_dma_bridge_buggy; +EXPORT_SYMBOL(isa_dma_bridge_buggy); + +int pci_pci_problems; +EXPORT_SYMBOL(pci_pci_problems); + unsigned int pci_pm_d3_delay; static void pci_dev_d3_sleep(struct pci_dev *dev) @@ -380,10 +386,9 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res) { const struct pci_bus *bus = dev->bus; int i; - struct resource *best = NULL; + struct resource *best = NULL, *r; - for(i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *r = bus->resource[i]; + pci_bus_for_each_resource(bus, r, i) { if (!r) continue; if (res->start && !(res->start >= r->start && res->end <= r->end)) @@ -457,6 +462,12 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) pci_platform_pm->sleep_wake(dev, enable) : -ENODEV; } +static inline int platform_pci_run_wake(struct pci_dev *dev, bool enable) +{ + return pci_platform_pm ? + pci_platform_pm->run_wake(dev, enable) : -ENODEV; +} + /** * pci_raw_set_power_state - Use PCI PM registers to set the power state of * given PCI device @@ -1190,6 +1201,66 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) } /** + * pci_check_pme_status - Check if given device has generated PME. + * @dev: Device to check. + * + * Check the PME status of the device and if set, clear it and clear PME enable + * (if set). Return 'true' if PME status and PME enable were both set or + * 'false' otherwise. + */ +bool pci_check_pme_status(struct pci_dev *dev) +{ + int pmcsr_pos; + u16 pmcsr; + bool ret = false; + + if (!dev->pm_cap) + return false; + + pmcsr_pos = dev->pm_cap + PCI_PM_CTRL; + pci_read_config_word(dev, pmcsr_pos, &pmcsr); + if (!(pmcsr & PCI_PM_CTRL_PME_STATUS)) + return false; + + /* Clear PME status. */ + pmcsr |= PCI_PM_CTRL_PME_STATUS; + if (pmcsr & PCI_PM_CTRL_PME_ENABLE) { + /* Disable PME to avoid interrupt flood. */ + pmcsr &= ~PCI_PM_CTRL_PME_ENABLE; + ret = true; + } + + pci_write_config_word(dev, pmcsr_pos, pmcsr); + + return ret; +} + +/** + * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set. + * @dev: Device to handle. + * @ign: Ignored. + * + * Check if @dev has generated PME and queue a resume request for it in that + * case. + */ +static int pci_pme_wakeup(struct pci_dev *dev, void *ign) +{ + if (pci_check_pme_status(dev)) + pm_request_resume(&dev->dev); + return 0; +} + +/** + * pci_pme_wakeup_bus - Walk given bus and wake up devices on it, if necessary. + * @bus: Top bus of the subtree to walk. + */ +void pci_pme_wakeup_bus(struct pci_bus *bus) +{ + if (bus) + pci_walk_bus(bus, pci_pme_wakeup, NULL); +} + +/** * pci_pme_capable - check the capability of PCI device to generate PME# * @dev: PCI device to handle. * @state: PCI state from which device will issue PME#. @@ -1230,9 +1301,10 @@ void pci_pme_active(struct pci_dev *dev, bool enable) } /** - * pci_enable_wake - enable PCI device as wakeup event source + * __pci_enable_wake - enable PCI device as wakeup event source * @dev: PCI device affected * @state: PCI state from which device will issue wakeup events + * @runtime: True if the events are to be generated at run time * @enable: True to enable event generation; false to disable * * This enables the device as a wakeup event source, or disables it. @@ -1248,11 +1320,12 @@ void pci_pme_active(struct pci_dev *dev, bool enable) * Error code depending on the platform is returned if both the platform and * the native mechanism fail to enable the generation of wake-up events */ -int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable) +int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, + bool runtime, bool enable) { int ret = 0; - if (enable && !device_may_wakeup(&dev->dev)) + if (enable && !runtime && !device_may_wakeup(&dev->dev)) return -EINVAL; /* Don't do the same thing twice in a row for one device. */ @@ -1272,19 +1345,24 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable) pci_pme_active(dev, true); else ret = 1; - error = platform_pci_sleep_wake(dev, true); + error = runtime ? platform_pci_run_wake(dev, true) : + platform_pci_sleep_wake(dev, true); if (ret) ret = error; if (!ret) dev->wakeup_prepared = true; } else { - platform_pci_sleep_wake(dev, false); + if (runtime) + platform_pci_run_wake(dev, false); + else + platform_pci_sleep_wake(dev, false); pci_pme_active(dev, false); dev->wakeup_prepared = false; } return ret; } +EXPORT_SYMBOL(__pci_enable_wake); /** * pci_wake_from_d3 - enable/disable device to wake up from D3_hot or D3_cold @@ -1394,6 +1472,66 @@ int pci_back_from_sleep(struct pci_dev *dev) } /** + * pci_finish_runtime_suspend - Carry out PCI-specific part of runtime suspend. + * @dev: PCI device being suspended. + * + * Prepare @dev to generate wake-up events at run time and put it into a low + * power state. + */ +int pci_finish_runtime_suspend(struct pci_dev *dev) +{ + pci_power_t target_state = pci_target_state(dev); + int error; + + if (target_state == PCI_POWER_ERROR) + return -EIO; + + __pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev)); + + error = pci_set_power_state(dev, target_state); + + if (error) + __pci_enable_wake(dev, target_state, true, false); + + return error; +} + +/** + * pci_dev_run_wake - Check if device can generate run-time wake-up events. + * @dev: Device to check. + * + * Return true if the device itself is cabable of generating wake-up events + * (through the platform or using the native PCIe PME) or if the device supports + * PME and one of its upstream bridges can generate wake-up events. + */ +bool pci_dev_run_wake(struct pci_dev *dev) +{ + struct pci_bus *bus = dev->bus; + + if (device_run_wake(&dev->dev)) + return true; + + if (!dev->pme_support) + return false; + + while (bus->parent) { + struct pci_dev *bridge = bus->self; + + if (device_run_wake(&bridge->dev)) + return true; + + bus = bus->parent; + } + + /* We have reached the root bus. */ + if (bus->bridge) + return device_run_wake(bus->bridge); + + return false; +} +EXPORT_SYMBOL_GPL(pci_dev_run_wake); + +/** * pci_pm_init - Initialize PM functions of given PCI device * @dev: PCI device to handle. */ @@ -2871,7 +3009,6 @@ EXPORT_SYMBOL(pci_save_state); EXPORT_SYMBOL(pci_restore_state); EXPORT_SYMBOL(pci_pme_capable); EXPORT_SYMBOL(pci_pme_active); -EXPORT_SYMBOL(pci_enable_wake); EXPORT_SYMBOL(pci_wake_from_d3); EXPORT_SYMBOL(pci_target_state); EXPORT_SYMBOL(pci_prepare_to_sleep); diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index fbd0e3adbca..4eb10f48d27 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -35,6 +35,10 @@ int pci_probe_reset_function(struct pci_dev *dev); * * @sleep_wake: enables/disables the system wake up capability of given device * + * @run_wake: enables/disables the platform to generate run-time wake-up events + * for given device (the device's wake-up capability has to be + * enabled by @sleep_wake for this feature to work) + * * If given platform is generally capable of power managing PCI devices, all of * these callbacks are mandatory. */ @@ -44,11 +48,16 @@ struct pci_platform_pm_ops { pci_power_t (*choose_state)(struct pci_dev *dev); bool (*can_wakeup)(struct pci_dev *dev); int (*sleep_wake)(struct pci_dev *dev, bool enable); + int (*run_wake)(struct pci_dev *dev, bool enable); }; extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops); extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state); extern void pci_disable_enabled_device(struct pci_dev *dev); +extern bool pci_check_pme_status(struct pci_dev *dev); +extern int pci_finish_runtime_suspend(struct pci_dev *dev); +extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign); +extern void pci_pme_wakeup_bus(struct pci_bus *bus); extern void pci_pm_init(struct pci_dev *dev); extern void platform_pci_wakeup_init(struct pci_dev *dev); extern void pci_allocate_cap_save_buffers(struct pci_dev *dev); @@ -319,6 +328,13 @@ struct pci_dev_reset_methods { int (*reset)(struct pci_dev *dev, int probe); }; +#ifdef CONFIG_PCI_QUIRKS extern int pci_dev_specific_reset(struct pci_dev *dev, int probe); +#else +static inline int pci_dev_specific_reset(struct pci_dev *dev, int probe) +{ + return -ENOTTY; +} +#endif #endif /* DRIVERS_PCI_H */ diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig index 5a0c6ad53f8..b8b494b3e0d 100644 --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig @@ -46,3 +46,7 @@ config PCIEASPM_DEBUG help This enables PCI Express ASPM debug support. It will add per-device interface to control ASPM. + +config PCIE_PME + def_bool y + depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile index 11f6bb1eae2..ea654545e7c 100644 --- a/drivers/pci/pcie/Makefile +++ b/drivers/pci/pcie/Makefile @@ -11,3 +11,5 @@ obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o # Build PCI Express AER if needed obj-$(CONFIG_PCIEAER) += aer/ + +obj-$(CONFIG_PCIE_PME) += pme/ diff --git a/drivers/pci/pcie/pme/Makefile b/drivers/pci/pcie/pme/Makefile new file mode 100644 index 00000000000..8b923805308 --- /dev/null +++ b/drivers/pci/pcie/pme/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for PCI-Express Root Port PME signaling driver +# + +obj-$(CONFIG_PCIE_PME) += pmedriver.o + +pmedriver-objs := pcie_pme.o +pmedriver-$(CONFIG_ACPI) += pcie_pme_acpi.o diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c new file mode 100644 index 00000000000..7b3cbff547e --- /dev/null +++ b/drivers/pci/pcie/pme/pcie_pme.c @@ -0,0 +1,505 @@ +/* + * PCIe Native PME support + * + * Copyright (C) 2007 - 2009 Intel Corp + * Copyright (C) 2007 - 2009 Shaohua Li <shaohua.li@intel.com> + * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License V2. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/pcieport_if.h> +#include <linux/acpi.h> +#include <linux/pci-acpi.h> +#include <linux/pm_runtime.h> + +#include "../../pci.h" +#include "pcie_pme.h" + +#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ +#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ + +/* + * If set, this switch will prevent the PCIe root port PME service driver from + * being registered. Consequently, the interrupt-based PCIe PME signaling will + * not be used by any PCIe root ports in that case. + */ +static bool pcie_pme_disabled; + +/* + * The PCI Express Base Specification 2.0, Section 6.1.8, states the following: + * "In order to maintain compatibility with non-PCI Express-aware system + * software, system power management logic must be configured by firmware to use + * the legacy mechanism of signaling PME by default. PCI Express-aware system + * software must notify the firmware prior to enabling native, interrupt-based + * PME signaling." However, if the platform doesn't provide us with a suitable + * notification mechanism or the notification fails, it is not clear whether or + * not we are supposed to use the interrupt-based PCIe PME signaling. The + * switch below can be used to indicate the desired behaviour. When set, it + * will make the kernel use the interrupt-based PCIe PME signaling regardless of + * the platform notification status, although the kernel will attempt to notify + * the platform anyway. When unset, it will prevent the kernel from using the + * the interrupt-based PCIe PME signaling if the platform notification fails, + * which is the default. + */ +static bool pcie_pme_force_enable; + +/* + * If this switch is set, MSI will not be used for PCIe PME signaling. This + * causes the PCIe port driver to use INTx interrupts only, but it turns out + * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based + * wake-up from system sleep states. + */ +bool pcie_pme_msi_disabled; + +static int __init pcie_pme_setup(char *str) +{ + if (!strcmp(str, "off")) + pcie_pme_disabled = true; + else if (!strcmp(str, "force")) + pcie_pme_force_enable = true; + else if (!strcmp(str, "nomsi")) + pcie_pme_msi_disabled = true; + return 1; +} +__setup("pcie_pme=", pcie_pme_setup); + +/** + * pcie_pme_platform_setup - Ensure that the kernel controls the PCIe PME. + * @srv: PCIe PME root port service to use for carrying out the check. + * + * Notify the platform that the native PCIe PME is going to be used and return + * 'true' if the control of the PCIe PME registers has been acquired from the + * platform. + */ +static bool pcie_pme_platform_setup(struct pcie_device *srv) +{ + if (!pcie_pme_platform_notify(srv)) + return true; + return pcie_pme_force_enable; +} + +struct pcie_pme_service_data { + spinlock_t lock; + struct pcie_device *srv; + struct work_struct work; + bool noirq; /* Don't enable the PME interrupt used by this service. */ +}; + +/** + * pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation. + * @dev: PCIe root port or event collector. + * @enable: Enable or disable the interrupt. + */ +static void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable) +{ + int rtctl_pos; + u16 rtctl; + + rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL; + + pci_read_config_word(dev, rtctl_pos, &rtctl); + if (enable) + rtctl |= PCI_EXP_RTCTL_PMEIE; + else + rtctl &= ~PCI_EXP_RTCTL_PMEIE; + pci_write_config_word(dev, rtctl_pos, rtctl); +} + +/** + * pcie_pme_clear_status - Clear root port PME interrupt status. + * @dev: PCIe root port or event collector. + */ +static void pcie_pme_clear_status(struct pci_dev *dev) +{ + int rtsta_pos; + u32 rtsta; + + rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA; + + pci_read_config_dword(dev, rtsta_pos, &rtsta); + rtsta |= PCI_EXP_RTSTA_PME; + pci_write_config_dword(dev, rtsta_pos, rtsta); +} + +/** + * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#. + * @bus: PCI bus to scan. + * + * Scan given PCI bus and all buses under it for devices asserting PME#. + */ +static bool pcie_pme_walk_bus(struct pci_bus *bus) +{ + struct pci_dev *dev; + bool ret = false; + + list_for_each_entry(dev, &bus->devices, bus_list) { + /* Skip PCIe devices in case we started from a root port. */ + if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) { + pm_request_resume(&dev->dev); + ret = true; + } + + if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate)) + ret = true; + } + + return ret; +} + +/** + * pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME. + * @bus: Secondary bus of the bridge. + * @devfn: Device/function number to check. + * + * PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band + * PCIe PME message. In such that case the bridge should use the Requester ID + * of device/function number 0 on its secondary bus. + */ +static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn) +{ + struct pci_dev *dev; + bool found = false; + + if (devfn) + return false; + + dev = pci_dev_get(bus->self); + if (!dev) + return false; + + if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) { + down_read(&pci_bus_sem); + if (pcie_pme_walk_bus(bus)) + found = true; + up_read(&pci_bus_sem); + } + + pci_dev_put(dev); + return found; +} + +/** + * pcie_pme_handle_request - Find device that generated PME and handle it. + * @port: Root port or event collector that generated the PME interrupt. + * @req_id: PCIe Requester ID of the device that generated the PME. + */ +static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id) +{ + u8 busnr = req_id >> 8, devfn = req_id & 0xff; + struct pci_bus *bus; + struct pci_dev *dev; + bool found = false; + + /* First, check if the PME is from the root port itself. */ + if (port->devfn == devfn && port->bus->number == busnr) { + if (pci_check_pme_status(port)) { + pm_request_resume(&port->dev); + found = true; + } else { + /* + * Apparently, the root port generated the PME on behalf + * of a non-PCIe device downstream. If this is done by + * a root port, the Requester ID field in its status + * register may contain either the root port's, or the + * source device's information (PCI Express Base + * Specification, Rev. 2.0, Section 6.1.9). + */ + down_read(&pci_bus_sem); + found = pcie_pme_walk_bus(port->subordinate); + up_read(&pci_bus_sem); + } + goto out; + } + + /* Second, find the bus the source device is on. */ + bus = pci_find_bus(pci_domain_nr(port->bus), busnr); + if (!bus) + goto out; + + /* Next, check if the PME is from a PCIe-PCI bridge. */ + found = pcie_pme_from_pci_bridge(bus, devfn); + if (found) + goto out; + + /* Finally, try to find the PME source on the bus. */ + down_read(&pci_bus_sem); + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_dev_get(dev); + if (dev->devfn == devfn) { + found = true; + break; + } + pci_dev_put(dev); + } + up_read(&pci_bus_sem); + + if (found) { + /* The device is there, but we have to check its PME status. */ + found = pci_check_pme_status(dev); + if (found) + pm_request_resume(&dev->dev); + pci_dev_put(dev); + } else if (devfn) { + /* + * The device is not there, but we can still try to recover by + * assuming that the PME was reported by a PCIe-PCI bridge that + * used devfn different from zero. + */ + dev_dbg(&port->dev, "PME interrupt generated for " + "non-existent device %02x:%02x.%d\n", + busnr, PCI_SLOT(devfn), PCI_FUNC(devfn)); + found = pcie_pme_from_pci_bridge(bus, 0); + } + + out: + if (!found) + dev_dbg(&port->dev, "Spurious native PME interrupt!\n"); +} + +/** + * pcie_pme_work_fn - Work handler for PCIe PME interrupt. + * @work: Work structure giving access to service data. + */ +static void pcie_pme_work_fn(struct work_struct *work) +{ + struct pcie_pme_service_data *data = + container_of(work, struct pcie_pme_service_data, work); + struct pci_dev *port = data->srv->port; + int rtsta_pos; + u32 rtsta; + + rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA; + + spin_lock_irq(&data->lock); + + for (;;) { + if (data->noirq) + break; + + pci_read_config_dword(port, rtsta_pos, &rtsta); + if (rtsta & PCI_EXP_RTSTA_PME) { + /* + * Clear PME status of the port. If there are other + * pending PMEs, the status will be set again. + */ + pcie_pme_clear_status(port); + + spin_unlock_irq(&data->lock); + pcie_pme_handle_request(port, rtsta & 0xffff); + spin_lock_irq(&data->lock); + + continue; + } + + /* No need to loop if there are no more PMEs pending. */ + if (!(rtsta & PCI_EXP_RTSTA_PENDING)) + break; + + spin_unlock_irq(&data->lock); + cpu_relax(); + spin_lock_irq(&data->lock); + } + + if (!data->noirq) + pcie_pme_interrupt_enable(port, true); + + spin_unlock_irq(&data->lock); +} + +/** + * pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt. + * @irq: Interrupt vector. + * @context: Interrupt context pointer. + */ +static irqreturn_t pcie_pme_irq(int irq, void *context) +{ + struct pci_dev *port; + struct pcie_pme_service_data *data; + int rtsta_pos; + u32 rtsta; + unsigned long flags; + + port = ((struct pcie_device *)context)->port; + data = get_service_data((struct pcie_device *)context); + + rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA; + + spin_lock_irqsave(&data->lock, flags); + pci_read_config_dword(port, rtsta_pos, &rtsta); + + if (!(rtsta & PCI_EXP_RTSTA_PME)) { + spin_unlock_irqrestore(&data->lock, flags); + return IRQ_NONE; + } + + pcie_pme_interrupt_enable(port, false); + spin_unlock_irqrestore(&data->lock, flags); + + /* We don't use pm_wq, because it's freezable. */ + schedule_work(&data->work); + + return IRQ_HANDLED; +} + +/** + * pcie_pme_set_native - Set the PME interrupt flag for given device. + * @dev: PCI device to handle. + * @ign: Ignored. + */ +static int pcie_pme_set_native(struct pci_dev *dev, void *ign) +{ + dev_info(&dev->dev, "Signaling PME through PCIe PME interrupt\n"); + + device_set_run_wake(&dev->dev, true); + dev->pme_interrupt = true; + return 0; +} + +/** + * pcie_pme_mark_devices - Set the PME interrupt flag for devices below a port. + * @port: PCIe root port or event collector to handle. + * + * For each device below given root port, including the port itself (or for each + * root complex integrated endpoint if @port is a root complex event collector) + * set the flag indicating that it can signal run-time wake-up events via PCIe + * PME interrupts. + */ +static void pcie_pme_mark_devices(struct pci_dev *port) +{ + pcie_pme_set_native(port, NULL); + if (port->subordinate) { + pci_walk_bus(port->subordinate, pcie_pme_set_native, NULL); + } else { + struct pci_bus *bus = port->bus; + struct pci_dev *dev; + + /* Check if this is a root port event collector. */ + if (port->pcie_type != PCI_EXP_TYPE_RC_EC || !bus) + return; + + down_read(&pci_bus_sem); + list_for_each_entry(dev, &bus->devices, bus_list) + if (pci_is_pcie(dev) + && dev->pcie_type == PCI_EXP_TYPE_RC_END) + pcie_pme_set_native(dev, NULL); + up_read(&pci_bus_sem); + } +} + +/** + * pcie_pme_probe - Initialize PCIe PME service for given root port. + * @srv: PCIe service to initialize. + */ +static int pcie_pme_probe(struct pcie_device *srv) +{ + struct pci_dev *port; + struct pcie_pme_service_data *data; + int ret; + + if (!pcie_pme_platform_setup(srv)) + return -EACCES; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->lock); + INIT_WORK(&data->work, pcie_pme_work_fn); + data->srv = srv; + set_service_data(srv, data); + + port = srv->port; + pcie_pme_interrupt_enable(port, false); + pcie_pme_clear_status(port); + + ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv); + if (ret) { + kfree(data); + } else { + pcie_pme_mark_devices(port); + pcie_pme_interrupt_enable(port, true); + } + + return ret; +} + +/** + * pcie_pme_suspend - Suspend PCIe PME service device. + * @srv: PCIe service device to suspend. + */ +static int pcie_pme_suspend(struct pcie_device *srv) +{ + struct pcie_pme_service_data *data = get_service_data(srv); + struct pci_dev *port = srv->port; + + spin_lock_irq(&data->lock); + pcie_pme_interrupt_enable(port, false); + pcie_pme_clear_status(port); + data->noirq = true; + spin_unlock_irq(&data->lock); + + synchronize_irq(srv->irq); + + return 0; +} + +/** + * pcie_pme_resume - Resume PCIe PME service device. + * @srv - PCIe service device to resume. + */ +static int pcie_pme_resume(struct pcie_device *srv) +{ + struct pcie_pme_service_data *data = get_service_data(srv); + struct pci_dev *port = srv->port; + + spin_lock_irq(&data->lock); + data->noirq = false; + pcie_pme_clear_status(port); + pcie_pme_interrupt_enable(port, true); + spin_unlock_irq(&data->lock); + + return 0; +} + +/** + * pcie_pme_remove - Prepare PCIe PME service device for removal. + * @srv - PCIe service device to resume. + */ +static void pcie_pme_remove(struct pcie_device *srv) +{ + pcie_pme_suspend(srv); + free_irq(srv->irq, srv); + kfree(get_service_data(srv)); +} + +static struct pcie_port_service_driver pcie_pme_driver = { + .name = "pcie_pme", + .port_type = PCI_EXP_TYPE_ROOT_PORT, + .service = PCIE_PORT_SERVICE_PME, + + .probe = pcie_pme_probe, + .suspend = pcie_pme_suspend, + .resume = pcie_pme_resume, + .remove = pcie_pme_remove, +}; + +/** + * pcie_pme_service_init - Register the PCIe PME service driver. + */ +static int __init pcie_pme_service_init(void) +{ + return pcie_pme_disabled ? + -ENODEV : pcie_port_service_register(&pcie_pme_driver); +} + +module_init(pcie_pme_service_init); diff --git a/drivers/pci/pcie/pme/pcie_pme.h b/drivers/pci/pcie/pme/pcie_pme.h new file mode 100644 index 00000000000..b30d2b7c977 --- /dev/null +++ b/drivers/pci/pcie/pme/pcie_pme.h @@ -0,0 +1,28 @@ +/* + * drivers/pci/pcie/pme/pcie_pme.h + * + * PCI Express Root Port PME signaling support + * + * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. + */ + +#ifndef _PCIE_PME_H_ +#define _PCIE_PME_H_ + +struct pcie_device; + +#ifdef CONFIG_ACPI +extern int pcie_pme_acpi_setup(struct pcie_device *srv); + +static inline int pcie_pme_platform_notify(struct pcie_device *srv) +{ + return pcie_pme_acpi_setup(srv); +} +#else /* !CONFIG_ACPI */ +static inline int pcie_pme_platform_notify(struct pcie_device *srv) +{ + return 0; +} +#endif /* !CONFIG_ACPI */ + +#endif diff --git a/drivers/pci/pcie/pme/pcie_pme_acpi.c b/drivers/pci/pcie/pme/pcie_pme_acpi.c new file mode 100644 index 00000000000..83ab2287ae3 --- /dev/null +++ b/drivers/pci/pcie/pme/pcie_pme_acpi.c @@ -0,0 +1,54 @@ +/* + * PCIe Native PME support, ACPI-related part + * + * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License V2. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/acpi.h> +#include <linux/pci-acpi.h> +#include <linux/pcieport_if.h> + +/** + * pcie_pme_acpi_setup - Request the ACPI BIOS to release control over PCIe PME. + * @srv - PCIe PME service for a root port or event collector. + * + * Invoked when the PCIe bus type loads PCIe PME service driver. To avoid + * conflict with the BIOS PCIe support requires the BIOS to yield PCIe PME + * control to the kernel. + */ +int pcie_pme_acpi_setup(struct pcie_device *srv) +{ + acpi_status status = AE_NOT_FOUND; + struct pci_dev *port = srv->port; + acpi_handle handle; + int error = 0; + + if (acpi_pci_disabled) + return -ENOSYS; + + dev_info(&port->dev, "Requesting control of PCIe PME from ACPI BIOS\n"); + + handle = acpi_find_root_bridge_handle(port); + if (!handle) + return -EINVAL; + + status = acpi_pci_osc_control_set(handle, + OSC_PCI_EXPRESS_PME_CONTROL | + OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); + if (ACPI_FAILURE(status)) { + dev_info(&port->dev, + "Failed to receive control of PCIe PME service: %s\n", + (status == AE_SUPPORT || status == AE_NOT_FOUND) ? + "no _OSC support" : "ACPI _OSC failed"); + error = -ENODEV; + } + + return error; +} diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index aaeb9d21cba..813a5c3427b 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -30,4 +30,21 @@ extern void pcie_port_device_remove(struct pci_dev *dev); extern int __must_check pcie_port_bus_register(void); extern void pcie_port_bus_unregister(void); +#ifdef CONFIG_PCIE_PME +extern bool pcie_pme_msi_disabled; + +static inline void pcie_pme_disable_msi(void) +{ + pcie_pme_msi_disabled = true; +} + +static inline bool pcie_pme_no_msi(void) +{ + return pcie_pme_msi_disabled; +} +#else /* !CONFIG_PCIE_PME */ +static inline void pcie_pme_disable_msi(void) {} +static inline bool pcie_pme_no_msi(void) { return false; } +#endif /* !CONFIG_PCIE_PME */ + #endif /* _PORTDRV_H_ */ diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index b174188ac12..0d34ff41539 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -186,16 +186,24 @@ static int pcie_port_enable_msix(struct pci_dev *dev, int *vectors, int mask) */ static int init_service_irqs(struct pci_dev *dev, int *irqs, int mask) { - int i, irq; + int i, irq = -1; + + /* We have to use INTx if MSI cannot be used for PCIe PME. */ + if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi()) { + if (dev->pin) + irq = dev->irq; + goto no_msi; + } /* Try to use MSI-X if supported */ if (!pcie_port_enable_msix(dev, irqs, mask)) return 0; + /* We're not going to use MSI-X, so try MSI and fall back to INTx */ - irq = -1; if (!pci_enable_msi(dev) || dev->pin) irq = dev->irq; + no_msi: for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) irqs[i] = irq; irqs[PCIE_PORT_SERVICE_VC_SHIFT] = -1; diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 13c8972886e..127e8f169d9 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -15,6 +15,7 @@ #include <linux/slab.h> #include <linux/pcieport_if.h> #include <linux/aer.h> +#include <linux/dmi.h> #include "portdrv.h" #include "aer/aerdrv.h" @@ -273,10 +274,36 @@ static struct pci_driver pcie_portdriver = { .driver.pm = PCIE_PORTDRV_PM_OPS, }; +static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d) +{ + pr_notice("%s detected: will not use MSI for PCIe PME signaling\n", + d->ident); + pcie_pme_disable_msi(); + return 0; +} + +static struct dmi_system_id __initdata pcie_portdrv_dmi_table[] = { + /* + * Boxes that should not use MSI for PCIe PME signaling. + */ + { + .callback = dmi_pcie_pme_disable_msi, + .ident = "MSI Wind U-100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "MICRO-STAR INTERNATIONAL CO., LTD"), + DMI_MATCH(DMI_PRODUCT_NAME, "U-100"), + }, + }, + {} +}; + static int __init pcie_portdrv_init(void) { int retval; + dmi_check_system(pcie_portdrv_dmi_table); + retval = pcie_port_bus_register(); if (retval) { printk(KERN_WARNING "PCIE: bus_register error: %d\n", retval); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 446e4a94d7d..270d069819f 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -89,6 +89,7 @@ static void release_pcibus_dev(struct device *dev) if (pci_bus->bridge) put_device(pci_bus->bridge); + pci_bus_remove_resources(pci_bus); kfree(pci_bus); } @@ -281,26 +282,12 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) } } -void __devinit pci_read_bridge_bases(struct pci_bus *child) +static void __devinit pci_read_bridge_io(struct pci_bus *child) { struct pci_dev *dev = child->self; u8 io_base_lo, io_limit_lo; - u16 mem_base_lo, mem_limit_lo; unsigned long base, limit; struct resource *res; - int i; - - if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */ - return; - - dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n", - child->secondary, child->subordinate, - dev->transparent ? " (subtractive decode)": ""); - - if (dev->transparent) { - for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++) - child->resource[i] = child->parent->resource[i - 3]; - } res = child->resource[0]; pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo); @@ -316,26 +303,50 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) limit |= (io_limit_hi << 16); } - if (base <= limit) { + if (base && base <= limit) { res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO; if (!res->start) res->start = base; if (!res->end) res->end = limit + 0xfff; dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); + } else { + dev_printk(KERN_DEBUG, &dev->dev, + " bridge window [io %04lx - %04lx] reg reading\n", + base, limit); } +} + +static void __devinit pci_read_bridge_mmio(struct pci_bus *child) +{ + struct pci_dev *dev = child->self; + u16 mem_base_lo, mem_limit_lo; + unsigned long base, limit; + struct resource *res; res = child->resource[1]; pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo); pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo); base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16; limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16; - if (base <= limit) { + if (base && base <= limit) { res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; res->start = base; res->end = limit + 0xfffff; dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); + } else { + dev_printk(KERN_DEBUG, &dev->dev, + " bridge window [mem 0x%08lx - 0x%08lx] reg reading\n", + base, limit + 0xfffff); } +} + +static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) +{ + struct pci_dev *dev = child->self; + u16 mem_base_lo, mem_limit_lo; + unsigned long base, limit; + struct resource *res; res = child->resource[2]; pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo); @@ -366,7 +377,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) #endif } } - if (base <= limit) { + if (base && base <= limit) { res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH; if (res->flags & PCI_PREF_RANGE_TYPE_64) @@ -374,6 +385,44 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->start = base; res->end = limit + 0xfffff; dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); + } else { + dev_printk(KERN_DEBUG, &dev->dev, + " bridge window [mem 0x%08lx - %08lx pref] reg reading\n", + base, limit + 0xfffff); + } +} + +void __devinit pci_read_bridge_bases(struct pci_bus *child) +{ + struct pci_dev *dev = child->self; + struct resource *res; + int i; + + if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */ + return; + + dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n", + child->secondary, child->subordinate, + dev->transparent ? " (subtractive decode)" : ""); + + pci_bus_remove_resources(child); + for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) + child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i]; + + pci_read_bridge_io(child); + pci_read_bridge_mmio(child); + pci_read_bridge_mmio_pref(child); + + if (dev->transparent) { + pci_bus_for_each_resource(child->parent, res, i) { + if (res) { + pci_bus_add_resource(child, res, + PCI_SUBTRACTIVE_DECODE); + dev_printk(KERN_DEBUG, &dev->dev, + " bridge window %pR (subtractive decode)\n", + res); + } + } } } @@ -387,10 +436,147 @@ static struct pci_bus * pci_alloc_bus(void) INIT_LIST_HEAD(&b->children); INIT_LIST_HEAD(&b->devices); INIT_LIST_HEAD(&b->slots); + INIT_LIST_HEAD(&b->resources); + b->max_bus_speed = PCI_SPEED_UNKNOWN; + b->cur_bus_speed = PCI_SPEED_UNKNOWN; } return b; } +static unsigned char pcix_bus_speed[] = { + PCI_SPEED_UNKNOWN, /* 0 */ + PCI_SPEED_66MHz_PCIX, /* 1 */ + PCI_SPEED_100MHz_PCIX, /* 2 */ + PCI_SPEED_133MHz_PCIX, /* 3 */ + PCI_SPEED_UNKNOWN, /* 4 */ + PCI_SPEED_66MHz_PCIX_ECC, /* 5 */ + PCI_SPEED_100MHz_PCIX_ECC, /* 6 */ + PCI_SPEED_133MHz_PCIX_ECC, /* 7 */ + PCI_SPEED_UNKNOWN, /* 8 */ + PCI_SPEED_66MHz_PCIX_266, /* 9 */ + PCI_SPEED_100MHz_PCIX_266, /* A */ + PCI_SPEED_133MHz_PCIX_266, /* B */ + PCI_SPEED_UNKNOWN, /* C */ + PCI_SPEED_66MHz_PCIX_533, /* D */ + PCI_SPEED_100MHz_PCIX_533, /* E */ + PCI_SPEED_133MHz_PCIX_533 /* F */ +}; + +static unsigned char pcie_link_speed[] = { + PCI_SPEED_UNKNOWN, /* 0 */ + PCIE_SPEED_2_5GT, /* 1 */ + PCIE_SPEED_5_0GT, /* 2 */ + PCIE_SPEED_8_0GT, /* 3 */ + PCI_SPEED_UNKNOWN, /* 4 */ + PCI_SPEED_UNKNOWN, /* 5 */ + PCI_SPEED_UNKNOWN, /* 6 */ + PCI_SPEED_UNKNOWN, /* 7 */ + PCI_SPEED_UNKNOWN, /* 8 */ + PCI_SPEED_UNKNOWN, /* 9 */ + PCI_SPEED_UNKNOWN, /* A */ + PCI_SPEED_UNKNOWN, /* B */ + PCI_SPEED_UNKNOWN, /* C */ + PCI_SPEED_UNKNOWN, /* D */ + PCI_SPEED_UNKNOWN, /* E */ + PCI_SPEED_UNKNOWN /* F */ +}; + +void pcie_update_link_speed(struct pci_bus *bus, u16 linksta) +{ + bus->cur_bus_speed = pcie_link_speed[linksta & 0xf]; +} +EXPORT_SYMBOL_GPL(pcie_update_link_speed); + +static unsigned char agp_speeds[] = { + AGP_UNKNOWN, + AGP_1X, + AGP_2X, + AGP_4X, + AGP_8X +}; + +static enum pci_bus_speed agp_speed(int agp3, int agpstat) +{ + int index = 0; + + if (agpstat & 4) + index = 3; + else if (agpstat & 2) + index = 2; + else if (agpstat & 1) + index = 1; + else + goto out; + + if (agp3) { + index += 2; + if (index == 5) + index = 0; + } + + out: + return agp_speeds[index]; +} + + +static void pci_set_bus_speed(struct pci_bus *bus) +{ + struct pci_dev *bridge = bus->self; + int pos; + + pos = pci_find_capability(bridge, PCI_CAP_ID_AGP); + if (!pos) + pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3); + if (pos) { + u32 agpstat, agpcmd; + + pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat); + bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7); + + pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd); + bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7); + } + + pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX); + if (pos) { + u16 status; + enum pci_bus_speed max; + pci_read_config_word(bridge, pos + 2, &status); + + if (status & 0x8000) { + max = PCI_SPEED_133MHz_PCIX_533; + } else if (status & 0x4000) { + max = PCI_SPEED_133MHz_PCIX_266; + } else if (status & 0x0002) { + if (((status >> 12) & 0x3) == 2) { + max = PCI_SPEED_133MHz_PCIX_ECC; + } else { + max = PCI_SPEED_133MHz_PCIX; + } + } else { + max = PCI_SPEED_66MHz_PCIX; + } + + bus->max_bus_speed = max; + bus->cur_bus_speed = pcix_bus_speed[(status >> 6) & 0xf]; + + return; + } + + pos = pci_find_capability(bridge, PCI_CAP_ID_EXP); + if (pos) { + u32 linkcap; + u16 linksta; + + pci_read_config_dword(bridge, pos + PCI_EXP_LNKCAP, &linkcap); + bus->max_bus_speed = pcie_link_speed[linkcap & 0xf]; + + pci_read_config_word(bridge, pos + PCI_EXP_LNKSTA, &linksta); + pcie_update_link_speed(bus, linksta); + } +} + + static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, struct pci_dev *bridge, int busnr) { @@ -430,6 +616,8 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, child->self = bridge; child->bridge = get_device(&bridge->dev); + pci_set_bus_speed(child); + /* Set up default resource pointers and names.. */ for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) { child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i]; @@ -1081,6 +1269,45 @@ struct pci_dev *__ref pci_scan_single_device(struct pci_bus *bus, int devfn) } EXPORT_SYMBOL(pci_scan_single_device); +static unsigned next_ari_fn(struct pci_dev *dev, unsigned fn) +{ + u16 cap; + unsigned pos, next_fn; + + if (!dev) + return 0; + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI); + if (!pos) + return 0; + pci_read_config_word(dev, pos + 4, &cap); + next_fn = cap >> 8; + if (next_fn <= fn) + return 0; + return next_fn; +} + +static unsigned next_trad_fn(struct pci_dev *dev, unsigned fn) +{ + return (fn + 1) % 8; +} + +static unsigned no_next_fn(struct pci_dev *dev, unsigned fn) +{ + return 0; +} + +static int only_one_child(struct pci_bus *bus) +{ + struct pci_dev *parent = bus->self; + if (!parent || !pci_is_pcie(parent)) + return 0; + if (parent->pcie_type == PCI_EXP_TYPE_ROOT_PORT || + parent->pcie_type == PCI_EXP_TYPE_DOWNSTREAM) + return 1; + return 0; +} + /** * pci_scan_slot - scan a PCI slot on a bus for devices. * @bus: PCI bus to scan @@ -1094,21 +1321,30 @@ EXPORT_SYMBOL(pci_scan_single_device); */ int pci_scan_slot(struct pci_bus *bus, int devfn) { - int fn, nr = 0; + unsigned fn, nr = 0; struct pci_dev *dev; + unsigned (*next_fn)(struct pci_dev *, unsigned) = no_next_fn; + + if (only_one_child(bus) && (devfn > 0)) + return 0; /* Already scanned the entire slot */ dev = pci_scan_single_device(bus, devfn); - if (dev && !dev->is_added) /* new device? */ + if (!dev) + return 0; + if (!dev->is_added) nr++; - if (dev && dev->multifunction) { - for (fn = 1; fn < 8; fn++) { - dev = pci_scan_single_device(bus, devfn + fn); - if (dev) { - if (!dev->is_added) - nr++; - dev->multifunction = 1; - } + if (pci_ari_enabled(bus)) + next_fn = next_ari_fn; + else if (dev->multifunction) + next_fn = next_trad_fn; + + for (fn = next_fn(dev, 0); fn > 0; fn = next_fn(dev, fn)) { + dev = pci_scan_single_device(bus, devfn + fn); + if (dev) { + if (!dev->is_added) + nr++; + dev->multifunction = 1; } } diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index d58b94030ef..790eb69a4aa 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -25,14 +25,9 @@ #include <linux/dmi.h> #include <linux/pci-aspm.h> #include <linux/ioport.h> +#include <asm/dma.h> /* isa_dma_bridge_buggy */ #include "pci.h" -int isa_dma_bridge_buggy; -EXPORT_SYMBOL(isa_dma_bridge_buggy); -int pci_pci_problems; -EXPORT_SYMBOL(pci_pci_problems); - -#ifdef CONFIG_PCI_QUIRKS /* * This quirk function disables memory decoding and releases memory resources * of the device specified by kernel's boot parameter 'pci=resource_alignment='. @@ -2612,6 +2607,7 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) } pci_do_fixups(dev, start, end); } +EXPORT_SYMBOL(pci_fixup_device); static int __init pci_apply_final_quirks(void) { @@ -2723,9 +2719,3 @@ int pci_dev_specific_reset(struct pci_dev *dev, int probe) return -ENOTTY; } - -#else -void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} -int pci_dev_specific_reset(struct pci_dev *dev, int probe) { return -ENOTTY; } -#endif -EXPORT_SYMBOL(pci_fixup_device); diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index c48cd377b3f..bf32f07c4ef 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -27,37 +27,83 @@ #include <linux/slab.h> #include "pci.h" -static void pbus_assign_resources_sorted(const struct pci_bus *bus) -{ - struct pci_dev *dev; +struct resource_list_x { + struct resource_list_x *next; struct resource *res; - struct resource_list head, *list, *tmp; - int idx; + struct pci_dev *dev; + resource_size_t start; + resource_size_t end; + unsigned long flags; +}; - head.next = NULL; - list_for_each_entry(dev, &bus->devices, bus_list) { - u16 class = dev->class >> 8; +static void add_to_failed_list(struct resource_list_x *head, + struct pci_dev *dev, struct resource *res) +{ + struct resource_list_x *list = head; + struct resource_list_x *ln = list->next; + struct resource_list_x *tmp; - /* Don't touch classless devices or host bridges or ioapics. */ - if (class == PCI_CLASS_NOT_DEFINED || - class == PCI_CLASS_BRIDGE_HOST) - continue; + tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); + if (!tmp) { + pr_warning("add_to_failed_list: kmalloc() failed!\n"); + return; + } - /* Don't touch ioapic devices already enabled by firmware */ - if (class == PCI_CLASS_SYSTEM_PIC) { - u16 command; - pci_read_config_word(dev, PCI_COMMAND, &command); - if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) - continue; - } + tmp->next = ln; + tmp->res = res; + tmp->dev = dev; + tmp->start = res->start; + tmp->end = res->end; + tmp->flags = res->flags; + list->next = tmp; +} + +static void free_failed_list(struct resource_list_x *head) +{ + struct resource_list_x *list, *tmp; - pdev_sort_resources(dev, &head); + for (list = head->next; list;) { + tmp = list; + list = list->next; + kfree(tmp); } - for (list = head.next; list;) { + head->next = NULL; +} + +static void __dev_sort_resources(struct pci_dev *dev, + struct resource_list *head) +{ + u16 class = dev->class >> 8; + + /* Don't touch classless devices or host bridges or ioapics. */ + if (class == PCI_CLASS_NOT_DEFINED || class == PCI_CLASS_BRIDGE_HOST) + return; + + /* Don't touch ioapic devices already enabled by firmware */ + if (class == PCI_CLASS_SYSTEM_PIC) { + u16 command; + pci_read_config_word(dev, PCI_COMMAND, &command); + if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) + return; + } + + pdev_sort_resources(dev, head); +} + +static void __assign_resources_sorted(struct resource_list *head, + struct resource_list_x *fail_head) +{ + struct resource *res; + struct resource_list *list, *tmp; + int idx; + + for (list = head->next; list;) { res = list->res; idx = res - &list->dev->resource[0]; if (pci_assign_resource(list->dev, idx)) { + if (fail_head && !pci_is_root_bus(list->dev->bus)) + add_to_failed_list(fail_head, list->dev, res); res->start = 0; res->end = 0; res->flags = 0; @@ -68,6 +114,30 @@ static void pbus_assign_resources_sorted(const struct pci_bus *bus) } } +static void pdev_assign_resources_sorted(struct pci_dev *dev, + struct resource_list_x *fail_head) +{ + struct resource_list head; + + head.next = NULL; + __dev_sort_resources(dev, &head); + __assign_resources_sorted(&head, fail_head); + +} + +static void pbus_assign_resources_sorted(const struct pci_bus *bus, + struct resource_list_x *fail_head) +{ + struct pci_dev *dev; + struct resource_list head; + + head.next = NULL; + list_for_each_entry(dev, &bus->devices, bus_list) + __dev_sort_resources(dev, &head); + + __assign_resources_sorted(&head, fail_head); +} + void pci_setup_cardbus(struct pci_bus *bus) { struct pci_dev *bridge = bus->self; @@ -134,18 +204,12 @@ EXPORT_SYMBOL(pci_setup_cardbus); config space writes, so it's quite possible that an I/O window of the bridge will have some undesirable address (e.g. 0) after the first write. Ditto 64-bit prefetchable MMIO. */ -static void pci_setup_bridge(struct pci_bus *bus) +static void pci_setup_bridge_io(struct pci_bus *bus) { struct pci_dev *bridge = bus->self; struct resource *res; struct pci_bus_region region; - u32 l, bu, lu, io_upper16; - - if (pci_is_enabled(bridge)) - return; - - dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n", - bus->secondary, bus->subordinate); + u32 l, io_upper16; /* Set up the top and bottom of the PCI I/O segment for this bus. */ res = bus->resource[0]; @@ -158,8 +222,7 @@ static void pci_setup_bridge(struct pci_bus *bus) /* Set up upper 16 bits of I/O base/limit. */ io_upper16 = (region.end & 0xffff0000) | (region.start >> 16); dev_info(&bridge->dev, " bridge window %pR\n", res); - } - else { + } else { /* Clear upper 16 bits of I/O base/limit. */ io_upper16 = 0; l = 0x00f0; @@ -171,21 +234,35 @@ static void pci_setup_bridge(struct pci_bus *bus) pci_write_config_dword(bridge, PCI_IO_BASE, l); /* Update upper 16 bits of I/O base/limit. */ pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16); +} - /* Set up the top and bottom of the PCI Memory segment - for this bus. */ +static void pci_setup_bridge_mmio(struct pci_bus *bus) +{ + struct pci_dev *bridge = bus->self; + struct resource *res; + struct pci_bus_region region; + u32 l; + + /* Set up the top and bottom of the PCI Memory segment for this bus. */ res = bus->resource[1]; pcibios_resource_to_bus(bridge, ®ion, res); if (res->flags & IORESOURCE_MEM) { l = (region.start >> 16) & 0xfff0; l |= region.end & 0xfff00000; dev_info(&bridge->dev, " bridge window %pR\n", res); - } - else { + } else { l = 0x0000fff0; dev_info(&bridge->dev, " bridge window [mem disabled]\n"); } pci_write_config_dword(bridge, PCI_MEMORY_BASE, l); +} + +static void pci_setup_bridge_mmio_pref(struct pci_bus *bus) +{ + struct pci_dev *bridge = bus->self; + struct resource *res; + struct pci_bus_region region; + u32 l, bu, lu; /* Clear out the upper 32 bits of PREF limit. If PCI_PREF_BASE_UPPER32 was non-zero, this temporarily @@ -204,8 +281,7 @@ static void pci_setup_bridge(struct pci_bus *bus) lu = upper_32_bits(region.end); } dev_info(&bridge->dev, " bridge window %pR\n", res); - } - else { + } else { l = 0x0000fff0; dev_info(&bridge->dev, " bridge window [mem pref disabled]\n"); } @@ -214,10 +290,35 @@ static void pci_setup_bridge(struct pci_bus *bus) /* Set the upper 32 bits of PREF base & limit. */ pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu); pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu); +} + +static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type) +{ + struct pci_dev *bridge = bus->self; + + dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n", + bus->secondary, bus->subordinate); + + if (type & IORESOURCE_IO) + pci_setup_bridge_io(bus); + + if (type & IORESOURCE_MEM) + pci_setup_bridge_mmio(bus); + + if (type & IORESOURCE_PREFETCH) + pci_setup_bridge_mmio_pref(bus); pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl); } +static void pci_setup_bridge(struct pci_bus *bus) +{ + unsigned long type = IORESOURCE_IO | IORESOURCE_MEM | + IORESOURCE_PREFETCH; + + __pci_setup_bridge(bus, type); +} + /* Check whether the bridge supports optional I/O and prefetchable memory ranges. If not, the respective base/limit registers must be read-only and read as 0. */ @@ -253,8 +354,11 @@ static void pci_bridge_check_ranges(struct pci_bus *bus) } if (pmem) { b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH; - if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) + if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == + PCI_PREF_RANGE_TYPE_64) { b_res[2].flags |= IORESOURCE_MEM_64; + b_res[2].flags |= PCI_PREF_RANGE_TYPE_64; + } } /* double check if bridge does support 64 bit pref */ @@ -283,8 +387,7 @@ static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned lon unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - r = bus->resource[i]; + pci_bus_for_each_resource(bus, r, i) { if (r == &ioport_resource || r == &iomem_resource) continue; if (r && (r->flags & type_mask) == type && !r->parent) @@ -301,7 +404,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size) { struct pci_dev *dev; struct resource *b_res = find_free_bus_resource(bus, IORESOURCE_IO); - unsigned long size = 0, size1 = 0; + unsigned long size = 0, size1 = 0, old_size; if (!b_res) return; @@ -326,12 +429,17 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size) } if (size < min_size) size = min_size; + old_size = resource_size(b_res); + if (old_size == 1) + old_size = 0; /* To be fixed in 2.5: we should have sort of HAVE_ISA flag in the struct pci_bus. */ #if defined(CONFIG_ISA) || defined(CONFIG_EISA) size = (size & 0xff) + ((size & ~0xffUL) << 2); #endif size = ALIGN(size + size1, 4096); + if (size < old_size) + size = old_size; if (!size) { if (b_res->start || b_res->end) dev_info(&bus->self->dev, "disabling bridge window " @@ -352,7 +460,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long type, resource_size_t min_size) { struct pci_dev *dev; - resource_size_t min_align, align, size; + resource_size_t min_align, align, size, old_size; resource_size_t aligns[12]; /* Alignments from 1Mb to 2Gb */ int order, max_order; struct resource *b_res = find_free_bus_resource(bus, type); @@ -402,6 +510,11 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, } if (size < min_size) size = min_size; + old_size = resource_size(b_res); + if (old_size == 1) + old_size = 0; + if (size < old_size) + size = old_size; align = 0; min_align = 0; @@ -538,23 +651,25 @@ void __ref pci_bus_size_bridges(struct pci_bus *bus) } EXPORT_SYMBOL(pci_bus_size_bridges); -void __ref pci_bus_assign_resources(const struct pci_bus *bus) +static void __ref __pci_bus_assign_resources(const struct pci_bus *bus, + struct resource_list_x *fail_head) { struct pci_bus *b; struct pci_dev *dev; - pbus_assign_resources_sorted(bus); + pbus_assign_resources_sorted(bus, fail_head); list_for_each_entry(dev, &bus->devices, bus_list) { b = dev->subordinate; if (!b) continue; - pci_bus_assign_resources(b); + __pci_bus_assign_resources(b, fail_head); switch (dev->class >> 8) { case PCI_CLASS_BRIDGE_PCI: - pci_setup_bridge(b); + if (!pci_is_enabled(dev)) + pci_setup_bridge(b); break; case PCI_CLASS_BRIDGE_CARDBUS: @@ -568,15 +683,130 @@ void __ref pci_bus_assign_resources(const struct pci_bus *bus) } } } + +void __ref pci_bus_assign_resources(const struct pci_bus *bus) +{ + __pci_bus_assign_resources(bus, NULL); +} EXPORT_SYMBOL(pci_bus_assign_resources); +static void __ref __pci_bridge_assign_resources(const struct pci_dev *bridge, + struct resource_list_x *fail_head) +{ + struct pci_bus *b; + + pdev_assign_resources_sorted((struct pci_dev *)bridge, fail_head); + + b = bridge->subordinate; + if (!b) + return; + + __pci_bus_assign_resources(b, fail_head); + + switch (bridge->class >> 8) { + case PCI_CLASS_BRIDGE_PCI: + pci_setup_bridge(b); + break; + + case PCI_CLASS_BRIDGE_CARDBUS: + pci_setup_cardbus(b); + break; + + default: + dev_info(&bridge->dev, "not setting up bridge for bus " + "%04x:%02x\n", pci_domain_nr(b), b->number); + break; + } +} +static void pci_bridge_release_resources(struct pci_bus *bus, + unsigned long type) +{ + int idx; + bool changed = false; + struct pci_dev *dev; + struct resource *r; + unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | + IORESOURCE_PREFETCH; + + dev = bus->self; + for (idx = PCI_BRIDGE_RESOURCES; idx <= PCI_BRIDGE_RESOURCE_END; + idx++) { + r = &dev->resource[idx]; + if ((r->flags & type_mask) != type) + continue; + if (!r->parent) + continue; + /* + * if there are children under that, we should release them + * all + */ + release_child_resources(r); + if (!release_resource(r)) { + dev_printk(KERN_DEBUG, &dev->dev, + "resource %d %pR released\n", idx, r); + /* keep the old size */ + r->end = resource_size(r) - 1; + r->start = 0; + r->flags = 0; + changed = true; + } + } + + if (changed) { + /* avoiding touch the one without PREF */ + if (type & IORESOURCE_PREFETCH) + type = IORESOURCE_PREFETCH; + __pci_setup_bridge(bus, type); + } +} + +enum release_type { + leaf_only, + whole_subtree, +}; +/* + * try to release pci bridge resources that is from leaf bridge, + * so we can allocate big new one later + */ +static void __ref pci_bus_release_bridge_resources(struct pci_bus *bus, + unsigned long type, + enum release_type rel_type) +{ + struct pci_dev *dev; + bool is_leaf_bridge = true; + + list_for_each_entry(dev, &bus->devices, bus_list) { + struct pci_bus *b = dev->subordinate; + if (!b) + continue; + + is_leaf_bridge = false; + + if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) + continue; + + if (rel_type == whole_subtree) + pci_bus_release_bridge_resources(b, type, + whole_subtree); + } + + if (pci_is_root_bus(bus)) + return; + + if ((bus->self->class >> 8) != PCI_CLASS_BRIDGE_PCI) + return; + + if ((rel_type == whole_subtree) || is_leaf_bridge) + pci_bridge_release_resources(bus, type); +} + static void pci_bus_dump_res(struct pci_bus *bus) { - int i; + struct resource *res; + int i; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *res = bus->resource[i]; - if (!res || !res->end) + pci_bus_for_each_resource(bus, res, i) { + if (!res || !res->end || !res->flags) continue; dev_printk(KERN_DEBUG, &bus->dev, "resource %d %pR\n", i, res); @@ -600,11 +830,65 @@ static void pci_bus_dump_resources(struct pci_bus *bus) } } +static int __init pci_bus_get_depth(struct pci_bus *bus) +{ + int depth = 0; + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + int ret; + struct pci_bus *b = dev->subordinate; + if (!b) + continue; + + ret = pci_bus_get_depth(b); + if (ret + 1 > depth) + depth = ret + 1; + } + + return depth; +} +static int __init pci_get_max_depth(void) +{ + int depth = 0; + struct pci_bus *bus; + + list_for_each_entry(bus, &pci_root_buses, node) { + int ret; + + ret = pci_bus_get_depth(bus); + if (ret > depth) + depth = ret; + } + + return depth; +} + +/* + * first try will not touch pci bridge res + * second and later try will clear small leaf bridge res + * will stop till to the max deepth if can not find good one + */ void __init pci_assign_unassigned_resources(void) { struct pci_bus *bus; + int tried_times = 0; + enum release_type rel_type = leaf_only; + struct resource_list_x head, *list; + unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | + IORESOURCE_PREFETCH; + unsigned long failed_type; + int max_depth = pci_get_max_depth(); + int pci_try_num; + head.next = NULL; + + pci_try_num = max_depth + 1; + printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n", + max_depth, pci_try_num); + +again: /* Depth first, calculate sizes and alignments of all subordinate buses. */ list_for_each_entry(bus, &pci_root_buses, node) { @@ -612,12 +896,130 @@ pci_assign_unassigned_resources(void) } /* Depth last, allocate resources and update the hardware. */ list_for_each_entry(bus, &pci_root_buses, node) { - pci_bus_assign_resources(bus); - pci_enable_bridges(bus); + __pci_bus_assign_resources(bus, &head); } + tried_times++; + + /* any device complain? */ + if (!head.next) + goto enable_and_dump; + failed_type = 0; + for (list = head.next; list;) { + failed_type |= list->flags; + list = list->next; + } + /* + * io port are tight, don't try extra + * or if reach the limit, don't want to try more + */ + failed_type &= type_mask; + if ((failed_type == IORESOURCE_IO) || (tried_times >= pci_try_num)) { + free_failed_list(&head); + goto enable_and_dump; + } + + printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n", + tried_times + 1); + + /* third times and later will not check if it is leaf */ + if ((tried_times + 1) > 2) + rel_type = whole_subtree; + + /* + * Try to release leaf bridge's resources that doesn't fit resource of + * child device under that bridge + */ + for (list = head.next; list;) { + bus = list->dev->bus; + pci_bus_release_bridge_resources(bus, list->flags & type_mask, + rel_type); + list = list->next; + } + /* restore size and flags */ + for (list = head.next; list;) { + struct resource *res = list->res; + + res->start = list->start; + res->end = list->end; + res->flags = list->flags; + if (list->dev->subordinate) + res->flags = 0; + + list = list->next; + } + free_failed_list(&head); + + goto again; + +enable_and_dump: + /* Depth last, update the hardware. */ + list_for_each_entry(bus, &pci_root_buses, node) + pci_enable_bridges(bus); /* dump the resource on buses */ list_for_each_entry(bus, &pci_root_buses, node) { pci_bus_dump_resources(bus); } } + +void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) +{ + struct pci_bus *parent = bridge->subordinate; + int tried_times = 0; + struct resource_list_x head, *list; + int retval; + unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | + IORESOURCE_PREFETCH; + + head.next = NULL; + +again: + pci_bus_size_bridges(parent); + __pci_bridge_assign_resources(bridge, &head); + retval = pci_reenable_device(bridge); + pci_set_master(bridge); + pci_enable_bridges(parent); + + tried_times++; + + if (!head.next) + return; + + if (tried_times >= 2) { + /* still fail, don't need to try more */ + free_failed_list(&head); + return; + } + + printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n", + tried_times + 1); + + /* + * Try to release leaf bridge's resources that doesn't fit resource of + * child device under that bridge + */ + for (list = head.next; list;) { + struct pci_bus *bus = list->dev->bus; + unsigned long flags = list->flags; + + pci_bus_release_bridge_resources(bus, flags & type_mask, + whole_subtree); + list = list->next; + } + /* restore size and flags */ + for (list = head.next; list;) { + struct resource *res = list->res; + + res->start = list->start; + res->end = list->end; + res->flags = list->flags; + if (list->dev->subordinate) + res->flags = 0; + + list = list->next; + } + free_failed_list(&head); + + goto again; +} +EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources); diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 8c02b6c53bd..49c9e6c9779 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -47,6 +47,55 @@ static ssize_t address_read_file(struct pci_slot *slot, char *buf) slot->number); } +/* these strings match up with the values in pci_bus_speed */ +static char *pci_bus_speed_strings[] = { + "33 MHz PCI", /* 0x00 */ + "66 MHz PCI", /* 0x01 */ + "66 MHz PCI-X", /* 0x02 */ + "100 MHz PCI-X", /* 0x03 */ + "133 MHz PCI-X", /* 0x04 */ + NULL, /* 0x05 */ + NULL, /* 0x06 */ + NULL, /* 0x07 */ + NULL, /* 0x08 */ + "66 MHz PCI-X 266", /* 0x09 */ + "100 MHz PCI-X 266", /* 0x0a */ + "133 MHz PCI-X 266", /* 0x0b */ + "Unknown AGP", /* 0x0c */ + "1x AGP", /* 0x0d */ + "2x AGP", /* 0x0e */ + "4x AGP", /* 0x0f */ + "8x AGP", /* 0x10 */ + "66 MHz PCI-X 533", /* 0x11 */ + "100 MHz PCI-X 533", /* 0x12 */ + "133 MHz PCI-X 533", /* 0x13 */ + "2.5 GT/s PCIe", /* 0x14 */ + "5.0 GT/s PCIe", /* 0x15 */ + "8.0 GT/s PCIe", /* 0x16 */ +}; + +static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf) +{ + const char *speed_string; + + if (speed < ARRAY_SIZE(pci_bus_speed_strings)) + speed_string = pci_bus_speed_strings[speed]; + else + speed_string = "Unknown"; + + return sprintf(buf, "%s\n", speed_string); +} + +static ssize_t max_speed_read_file(struct pci_slot *slot, char *buf) +{ + return bus_speed_read(slot->bus->max_bus_speed, buf); +} + +static ssize_t cur_speed_read_file(struct pci_slot *slot, char *buf) +{ + return bus_speed_read(slot->bus->cur_bus_speed, buf); +} + static void pci_slot_release(struct kobject *kobj) { struct pci_dev *dev; @@ -66,9 +115,15 @@ static void pci_slot_release(struct kobject *kobj) static struct pci_slot_attribute pci_slot_attr_address = __ATTR(address, (S_IFREG | S_IRUGO), address_read_file, NULL); +static struct pci_slot_attribute pci_slot_attr_max_speed = + __ATTR(max_bus_speed, (S_IFREG | S_IRUGO), max_speed_read_file, NULL); +static struct pci_slot_attribute pci_slot_attr_cur_speed = + __ATTR(cur_bus_speed, (S_IFREG | S_IRUGO), cur_speed_read_file, NULL); static struct attribute *pci_slot_default_attrs[] = { &pci_slot_attr_address.attr, + &pci_slot_attr_max_speed.attr, + &pci_slot_attr_cur_speed.attr, NULL, }; diff --git a/drivers/pcmcia/rsrc_mgr.c b/drivers/pcmcia/rsrc_mgr.c index 52db17263d8..f8401a0ef89 100644 --- a/drivers/pcmcia/rsrc_mgr.c +++ b/drivers/pcmcia/rsrc_mgr.c @@ -114,22 +114,21 @@ struct pcmcia_align_data { unsigned long offset; }; -static void pcmcia_align(void *align_data, struct resource *res, - unsigned long size, unsigned long align) +static resource_size_t pcmcia_align(void *align_data, + const struct resource *res, + resource_size_t size, resource_size_t align) { struct pcmcia_align_data *data = align_data; - unsigned long start; + resource_size_t start; start = (res->start & ~data->mask) + data->offset; if (start < res->start) start += data->mask + 1; - res->start = start; #ifdef CONFIG_X86 if (res->flags & IORESOURCE_IO) { if (start & 0x300) { start = (start + 0x3ff) & ~0x3ff; - res->start = start; } } #endif @@ -137,9 +136,11 @@ static void pcmcia_align(void *align_data, struct resource *res, #ifdef CONFIG_M68K if (res->flags & IORESOURCE_IO) { if ((res->start + size - 1) >= 1024) - res->start = res->end; + start = res->end; } #endif + + return start; } diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 9b0dc433a8c..c67638fe691 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -533,8 +533,8 @@ struct pcmcia_align_data { struct resource_map *map; }; -static void -pcmcia_common_align(void *align_data, struct resource *res, +static resource_size_t +pcmcia_common_align(void *align_data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pcmcia_align_data *data = align_data; @@ -545,17 +545,18 @@ pcmcia_common_align(void *align_data, struct resource *res, start = (res->start & ~data->mask) + data->offset; if (start < res->start) start += data->mask + 1; - res->start = start; + return start; } -static void -pcmcia_align(void *align_data, struct resource *res, resource_size_t size, - resource_size_t align) +static resource_size_t +pcmcia_align(void *align_data, const struct resource *res, + resource_size_t size, resource_size_t align) { struct pcmcia_align_data *data = align_data; struct resource_map *m; + resource_size_t start; - pcmcia_common_align(data, res, size, align); + start = pcmcia_common_align(data, res, size, align); for (m = data->map->next; m != data->map; m = m->next) { unsigned long start = m->base; @@ -567,8 +568,7 @@ pcmcia_align(void *align_data, struct resource *res, resource_size_t size, * fit here. */ if (res->start < start) { - res->start = start; - pcmcia_common_align(data, res, size, align); + start = pcmcia_common_align(data, res, size, align); } /* @@ -586,7 +586,9 @@ pcmcia_align(void *align_data, struct resource *res, resource_size_t size, * If we failed to find something suitable, ensure we fail. */ if (m == data->map) - res->start = res->end; + start = res->end; + + return start; } /* @@ -801,8 +803,7 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s) return -EINVAL; #endif - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - res = s->cb_dev->bus->resource[i]; + pci_bus_for_each_resource(s->cb_dev->bus, res, i) { if (!res) continue; diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index e4d12acdd52..1f2039d5e96 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -649,9 +649,10 @@ static int yenta_search_one_res(struct resource *root, struct resource *res, static int yenta_search_res(struct yenta_socket *socket, struct resource *res, u32 min) { + struct resource *root; int i; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *root = socket->dev->bus->resource[i]; + + pci_bus_for_each_resource(socket->dev->bus, root, i) { if (!root) continue; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 3cd9ccdcbd8..54508ccea02 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -242,6 +242,8 @@ struct acpi_device_perf { struct acpi_device_wakeup_flags { u8 valid:1; /* Can successfully enable wakeup? */ u8 run_wake:1; /* Run-Wake GPE devices */ + u8 always_enabled:1; /* Run-wake devices that are always enabled */ + u8 notifier_present:1; /* Wake-up notify handler has been installed */ }; struct acpi_device_wakeup_state { @@ -256,6 +258,7 @@ struct acpi_device_wakeup { struct acpi_device_wakeup_state state; struct acpi_device_wakeup_flags flags; int prepare_count; + int run_wake_count; }; /* Device */ @@ -386,6 +389,9 @@ acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int); struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle); #define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle)) +int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state); +int acpi_disable_wakeup_device_power(struct acpi_device *dev); + #ifdef CONFIG_PM_SLEEP int acpi_pm_device_sleep_state(struct device *, int *); int acpi_pm_device_sleep_wake(struct device *, bool); diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index f4906f6568d..3a4767c01c5 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -104,6 +104,7 @@ int acpi_pci_bind_root(struct acpi_device *device); struct pci_bus *pci_acpi_scan_root(struct acpi_device *device, int domain, int bus); +void pci_acpi_crs_quirks(void); /* -------------------------------------------------------------------------- Processor diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 86e9735a96b..3988f93b9c6 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -281,11 +281,11 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status); /* * GPE Interfaces */ -acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type); +acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action); -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number); +acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type); -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number); +acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type); acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags); diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 153f12dc337..73af4086337 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -668,15 +668,16 @@ typedef u32 acpi_event_status; /* * GPE info flags - Per GPE - * +-+-+-+---+---+-+ - * |7|6|5|4:3|2:1|0| - * +-+-+-+---+---+-+ - * | | | | | | - * | | | | | +--- Interrupt type: Edge or Level Triggered - * | | | | +--- Type: Wake-only, Runtime-only, or wake/runtime + * +-+-+-+---+-+-+-+ + * |7|6|5|4:3|2|1|0| + * +-+-+-+---+-+-+-+ + * | | | | | | | + * | | | | | | +--- Interrupt type: Edge or Level Triggered + * | | | | | +--- GPE can wake the system + * | | | | +--- Unused * | | | +--- Type of dispatch -- to method, handler, or none - * | | +--- Enabled for runtime? - * | +--- Enabled for wake? + * | | +--- Unused + * | +--- Unused * +--- Unused */ #define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x01 @@ -687,22 +688,13 @@ typedef u32 acpi_event_status; #define ACPI_GPE_TYPE_WAKE_RUN (u8) 0x06 #define ACPI_GPE_TYPE_WAKE (u8) 0x02 #define ACPI_GPE_TYPE_RUNTIME (u8) 0x04 /* Default */ +#define ACPI_GPE_CAN_WAKE (u8) 0x02 #define ACPI_GPE_DISPATCH_MASK (u8) 0x18 #define ACPI_GPE_DISPATCH_HANDLER (u8) 0x08 #define ACPI_GPE_DISPATCH_METHOD (u8) 0x10 #define ACPI_GPE_DISPATCH_NOT_USED (u8) 0x00 /* Default */ -#define ACPI_GPE_RUN_ENABLE_MASK (u8) 0x20 -#define ACPI_GPE_RUN_ENABLED (u8) 0x20 -#define ACPI_GPE_RUN_DISABLED (u8) 0x00 /* Default */ - -#define ACPI_GPE_WAKE_ENABLE_MASK (u8) 0x40 -#define ACPI_GPE_WAKE_ENABLED (u8) 0x40 -#define ACPI_GPE_WAKE_DISABLED (u8) 0x00 /* Default */ - -#define ACPI_GPE_ENABLE_MASK (u8) 0x60 /* Both run/wake */ - /* * Flags for GPE and Lock interfaces */ diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 7129504e053..dda98410d58 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -112,6 +112,7 @@ extern struct resource iomem_resource; extern int request_resource(struct resource *root, struct resource *new); extern int release_resource(struct resource *new); +void release_child_resources(struct resource *new); extern void reserve_region_with_split(struct resource *root, resource_size_t start, resource_size_t end, const char *name); @@ -120,8 +121,10 @@ extern void insert_resource_expand_to_fit(struct resource *root, struct resource extern int allocate_resource(struct resource *root, struct resource *new, resource_size_t size, resource_size_t min, resource_size_t max, resource_size_t align, - void (*alignf)(void *, struct resource *, - resource_size_t, resource_size_t), + resource_size_t (*alignf)(void *, + const struct resource *, + resource_size_t, + resource_size_t), void *alignf_data); int adjust_resource(struct resource *res, resource_size_t start, resource_size_t size); diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 93a7c08f869..c8b6473c5f4 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -11,6 +11,13 @@ #include <linux/acpi.h> #ifdef CONFIG_ACPI +extern acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev, + struct pci_bus *pci_bus); +extern acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev); +extern acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, + struct pci_dev *pci_dev); +extern acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev); + static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) { struct pci_bus *pbus = pdev->bus; diff --git a/include/linux/pci.h b/include/linux/pci.h index c1968f464c3..e19a69613d8 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -187,6 +187,33 @@ enum pci_bus_flags { PCI_BUS_FLAGS_NO_MMRBC = (__force pci_bus_flags_t) 2, }; +/* Based on the PCI Hotplug Spec, but some values are made up by us */ +enum pci_bus_speed { + PCI_SPEED_33MHz = 0x00, + PCI_SPEED_66MHz = 0x01, + PCI_SPEED_66MHz_PCIX = 0x02, + PCI_SPEED_100MHz_PCIX = 0x03, + PCI_SPEED_133MHz_PCIX = 0x04, + PCI_SPEED_66MHz_PCIX_ECC = 0x05, + PCI_SPEED_100MHz_PCIX_ECC = 0x06, + PCI_SPEED_133MHz_PCIX_ECC = 0x07, + PCI_SPEED_66MHz_PCIX_266 = 0x09, + PCI_SPEED_100MHz_PCIX_266 = 0x0a, + PCI_SPEED_133MHz_PCIX_266 = 0x0b, + AGP_UNKNOWN = 0x0c, + AGP_1X = 0x0d, + AGP_2X = 0x0e, + AGP_4X = 0x0f, + AGP_8X = 0x10, + PCI_SPEED_66MHz_PCIX_533 = 0x11, + PCI_SPEED_100MHz_PCIX_533 = 0x12, + PCI_SPEED_133MHz_PCIX_533 = 0x13, + PCIE_SPEED_2_5GT = 0x14, + PCIE_SPEED_5_0GT = 0x15, + PCIE_SPEED_8_0GT = 0x16, + PCI_SPEED_UNKNOWN = 0xff, +}; + struct pci_cap_saved_state { struct hlist_node next; char cap_nr; @@ -239,6 +266,7 @@ struct pci_dev { configuration space */ unsigned int pme_support:5; /* Bitmask of states from which PME# can be generated */ + unsigned int pme_interrupt:1; unsigned int d1_support:1; /* Low power state D1 is supported */ unsigned int d2_support:1; /* Low power state D2 is supported */ unsigned int no_d1d2:1; /* Only allow D0 and D3 */ @@ -275,7 +303,8 @@ struct pci_dev { unsigned int msix_enabled:1; unsigned int ari_enabled:1; /* ARI forwarding */ unsigned int is_managed:1; - unsigned int is_pcie:1; + unsigned int is_pcie:1; /* Obsolete. Will be removed. + Use pci_is_pcie() instead */ unsigned int needs_freset:1; /* Dev requires fundamental reset */ unsigned int state_saved:1; unsigned int is_physfn:1; @@ -335,9 +364,26 @@ static inline void pci_add_saved_cap(struct pci_dev *pci_dev, hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space); } -#ifndef PCI_BUS_NUM_RESOURCES -#define PCI_BUS_NUM_RESOURCES 16 -#endif +/* + * The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond + * to P2P or CardBus bridge windows) go in a table. Additional ones (for + * buses below host bridges or subtractive decode bridges) go in the list. + * Use pci_bus_for_each_resource() to iterate through all the resources. + */ + +/* + * PCI_SUBTRACTIVE_DECODE means the bridge forwards the window implicitly + * and there's no way to program the bridge with the details of the window. + * This does not apply to ACPI _CRS windows, even with the _DEC subtractive- + * decode bit set, because they are explicit and can be programmed with _SRS. + */ +#define PCI_SUBTRACTIVE_DECODE 0x1 + +struct pci_bus_resource { + struct list_head list; + struct resource *res; + unsigned int flags; +}; #define PCI_REGION_FLAG_MASK 0x0fU /* These bits of resource flags tell us the PCI region flags */ @@ -348,8 +394,8 @@ struct pci_bus { struct list_head devices; /* list of devices on this bus */ struct pci_dev *self; /* bridge device as seen by parent */ struct list_head slots; /* list of slots on this bus */ - struct resource *resource[PCI_BUS_NUM_RESOURCES]; - /* address space routed to this bus */ + struct resource *resource[PCI_BRIDGE_RESOURCE_NUM]; + struct list_head resources; /* address space routed to this bus */ struct pci_ops *ops; /* configuration access functions */ void *sysdata; /* hook for sys-specific extension */ @@ -359,6 +405,8 @@ struct pci_bus { unsigned char primary; /* number of primary bridge */ unsigned char secondary; /* number of secondary bridge */ unsigned char subordinate; /* max number of subordinate buses */ + unsigned char max_bus_speed; /* enum pci_bus_speed */ + unsigned char cur_bus_speed; /* enum pci_bus_speed */ char name[48]; @@ -563,7 +611,8 @@ int __must_check pcibios_enable_device(struct pci_dev *, int mask); char *pcibios_setup(char *str); /* Used only when drivers/pci/setup.c is used */ -void pcibios_align_resource(void *, struct resource *, resource_size_t, +resource_size_t pcibios_align_resource(void *, const struct resource *, + resource_size_t, resource_size_t); void pcibios_update_irq(struct pci_dev *, int irq); @@ -589,6 +638,7 @@ struct pci_bus *pci_create_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata); struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr); +void pcie_update_link_speed(struct pci_bus *bus, u16 link_status); struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr, const char *name, struct hotplug_slot *hotplug); @@ -615,12 +665,6 @@ extern void pci_sort_breadthfirst(void); /* Generic PCI functions exported to card drivers */ -#ifdef CONFIG_PCI_LEGACY -struct pci_dev __deprecated *pci_find_device(unsigned int vendor, - unsigned int device, - struct pci_dev *from); -#endif /* CONFIG_PCI_LEGACY */ - enum pci_lost_interrupt_reason { PCI_LOST_IRQ_NO_INFORMATION = 0, PCI_LOST_IRQ_DISABLE_MSI, @@ -750,11 +794,19 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state); pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state); bool pci_pme_capable(struct pci_dev *dev, pci_power_t state); void pci_pme_active(struct pci_dev *dev, bool enable); -int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable); +int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, + bool runtime, bool enable); int pci_wake_from_d3(struct pci_dev *dev, bool enable); pci_power_t pci_target_state(struct pci_dev *dev); int pci_prepare_to_sleep(struct pci_dev *dev); int pci_back_from_sleep(struct pci_dev *dev); +bool pci_dev_run_wake(struct pci_dev *dev); + +static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, + bool enable) +{ + return __pci_enable_wake(dev, state, false, enable); +} /* For use by arch with custom probe code */ void set_pcie_port_type(struct pci_dev *pdev); @@ -776,6 +828,7 @@ void pci_bus_assign_resources(const struct pci_bus *bus); void pci_bus_size_bridges(struct pci_bus *bus); int pci_claim_resource(struct pci_dev *, int); void pci_assign_unassigned_resources(void); +void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge); void pdev_enable_device(struct pci_dev *); void pdev_sort_resources(struct pci_dev *, struct resource_list *); int pci_enable_resources(struct pci_dev *, int mask); @@ -793,12 +846,23 @@ int pci_request_selected_regions_exclusive(struct pci_dev *, int, const char *); void pci_release_selected_regions(struct pci_dev *, int); /* drivers/pci/bus.c */ +void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags); +struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n); +void pci_bus_remove_resources(struct pci_bus *bus); + +#define pci_bus_for_each_resource(bus, res, i) \ + for (i = 0; \ + (res = pci_bus_resource_n(bus, i)) || i < PCI_BRIDGE_RESOURCE_NUM; \ + i++) + int __must_check pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, resource_size_t min, unsigned int type_mask, - void (*alignf)(void *, struct resource *, - resource_size_t, resource_size_t), + resource_size_t (*alignf)(void *, + const struct resource *, + resource_size_t, + resource_size_t), void *alignf_data); void pci_enable_bridges(struct pci_bus *bus); @@ -977,13 +1041,6 @@ static inline int pci_proc_domain(struct pci_bus *bus) _PCI_NOP_ALL(read, *) _PCI_NOP_ALL(write,) -static inline struct pci_dev *pci_find_device(unsigned int vendor, - unsigned int device, - struct pci_dev *from) -{ - return NULL; -} - static inline struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device, struct pci_dev *from) @@ -1241,8 +1298,12 @@ enum pci_fixup_pass { DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ suspend##vendor##device##hook, vendor, device, hook) - +#ifdef CONFIG_PCI_QUIRKS void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); +#else +static inline void pci_fixup_device(enum pci_fixup_pass pass, + struct pci_dev *dev) {} +#endif void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen); void pcim_iounmap(struct pci_dev *pdev, void __iomem *addr); diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index 652ba797696..5d09cbafa7d 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -28,26 +28,6 @@ #ifndef _PCI_HOTPLUG_H #define _PCI_HOTPLUG_H - -/* These values come from the PCI Hotplug Spec */ -enum pci_bus_speed { - PCI_SPEED_33MHz = 0x00, - PCI_SPEED_66MHz = 0x01, - PCI_SPEED_66MHz_PCIX = 0x02, - PCI_SPEED_100MHz_PCIX = 0x03, - PCI_SPEED_133MHz_PCIX = 0x04, - PCI_SPEED_66MHz_PCIX_ECC = 0x05, - PCI_SPEED_100MHz_PCIX_ECC = 0x06, - PCI_SPEED_133MHz_PCIX_ECC = 0x07, - PCI_SPEED_66MHz_PCIX_266 = 0x09, - PCI_SPEED_100MHz_PCIX_266 = 0x0a, - PCI_SPEED_133MHz_PCIX_266 = 0x0b, - PCI_SPEED_66MHz_PCIX_533 = 0x11, - PCI_SPEED_100MHz_PCIX_533 = 0x12, - PCI_SPEED_133MHz_PCIX_533 = 0x13, - PCI_SPEED_UNKNOWN = 0xff, -}; - /* These values come from the PCI Express Spec */ enum pcie_link_width { PCIE_LNK_WIDTH_RESRV = 0x00, @@ -61,12 +41,6 @@ enum pcie_link_width { PCIE_LNK_WIDTH_UNKNOWN = 0xFF, }; -enum pcie_link_speed { - PCIE_2_5GB = 0x14, - PCIE_5_0GB = 0x15, - PCIE_LNK_SPEED_UNKNOWN = 0xFF, -}; - /** * struct hotplug_slot_ops -the callbacks that the hotplug pci core can use * @owner: The module owner of this structure @@ -89,12 +63,6 @@ enum pcie_link_speed { * @get_adapter_status: Called to get see if an adapter is present in the slot or not. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. - * @get_max_bus_speed: Called to get the max bus speed for a slot. - * If this field is NULL, the value passed in the struct hotplug_slot_info - * will be used when this value is requested by a user. - * @get_cur_bus_speed: Called to get the current bus speed for a slot. - * If this field is NULL, the value passed in the struct hotplug_slot_info - * will be used when this value is requested by a user. * * The table of function pointers that is passed to the hotplug pci core by a * hotplug pci driver. These functions are called by the hotplug pci core when @@ -112,17 +80,14 @@ struct hotplug_slot_ops { int (*get_attention_status) (struct hotplug_slot *slot, u8 *value); int (*get_latch_status) (struct hotplug_slot *slot, u8 *value); int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value); - int (*get_max_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value); - int (*get_cur_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value); }; /** * struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot - * @power: if power is enabled or not (1/0) + * @power_status: if power is enabled or not (1/0) * @attention_status: if the attention light is enabled or not (1/0) * @latch_status: if the latch (if any) is open or closed (1/0) - * @adapter_present: if there is a pci board present in the slot or not (1/0) - * @address: (domain << 16 | bus << 8 | dev) + * @adapter_status: if there is a pci board present in the slot or not (1/0) * * Used to notify the hotplug pci core of the status of a specific slot. */ @@ -131,8 +96,6 @@ struct hotplug_slot_info { u8 attention_status; u8 latch_status; u8 adapter_status; - enum pci_bus_speed max_bus_speed; - enum pci_bus_speed cur_bus_speed; }; /** diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index cca8a044e2b..0be82432058 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2417,6 +2417,9 @@ #define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21 #define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30 #define PCI_DEVICE_ID_INTEL_IOAT 0x1a38 +#define PCI_DEVICE_ID_INTEL_CPT_SMBUS 0x1c22 +#define PCI_DEVICE_ID_INTEL_CPT_LPC1 0x1c42 +#define PCI_DEVICE_ID_INTEL_CPT_LPC2 0x1c43 #define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410 #define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411 #define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413 diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index 91e09d3b2eb..4c9cffcf69c 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -222,3 +222,8 @@ config PM_RUNTIME and the bus type drivers of the buses the devices are on are responsible for the actual handling of the autosuspend requests and wake-up events. + +config PM_OPS + bool + depends on PM_SLEEP || PM_RUNTIME + default y diff --git a/kernel/resource.c b/kernel/resource.c index af96c1e4b54..24e9e60c145 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -188,6 +188,36 @@ static int __release_resource(struct resource *old) return -EINVAL; } +static void __release_child_resources(struct resource *r) +{ + struct resource *tmp, *p; + resource_size_t size; + + p = r->child; + r->child = NULL; + while (p) { + tmp = p; + p = p->sibling; + + tmp->parent = NULL; + tmp->sibling = NULL; + __release_child_resources(tmp); + + printk(KERN_DEBUG "release child resource %pR\n", tmp); + /* need to restore size, and keep flags */ + size = resource_size(tmp); + tmp->start = 0; + tmp->end = size - 1; + } +} + +void release_child_resources(struct resource *r) +{ + write_lock(&resource_lock); + __release_child_resources(r); + write_unlock(&resource_lock); +} + /** * request_resource - request and reserve an I/O or memory resource * @root: root resource descriptor @@ -303,8 +333,10 @@ int walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages, static int find_resource(struct resource *root, struct resource *new, resource_size_t size, resource_size_t min, resource_size_t max, resource_size_t align, - void (*alignf)(void *, struct resource *, - resource_size_t, resource_size_t), + resource_size_t (*alignf)(void *, + const struct resource *, + resource_size_t, + resource_size_t), void *alignf_data) { struct resource *this = root->child; @@ -330,7 +362,7 @@ static int find_resource(struct resource *root, struct resource *new, tmp.end = max; tmp.start = ALIGN(tmp.start, align); if (alignf) - alignf(alignf_data, &tmp, size, align); + tmp.start = alignf(alignf_data, &tmp, size, align); if (tmp.start < tmp.end && tmp.end - tmp.start >= size - 1) { new->start = tmp.start; new->end = tmp.start + size - 1; @@ -358,8 +390,10 @@ static int find_resource(struct resource *root, struct resource *new, int allocate_resource(struct resource *root, struct resource *new, resource_size_t size, resource_size_t min, resource_size_t max, resource_size_t align, - void (*alignf)(void *, struct resource *, - resource_size_t, resource_size_t), + resource_size_t (*alignf)(void *, + const struct resource *, + resource_size_t, + resource_size_t), void *alignf_data) { int err; |