diff options
| -rw-r--r-- | drivers/usb/core/driver.c | 69 | ||||
| -rw-r--r-- | drivers/usb/core/generic.c | 184 | ||||
| -rw-r--r-- | drivers/usb/core/hub.c | 164 | ||||
| -rw-r--r-- | drivers/usb/core/usb.c | 1 |
4 files changed, 232 insertions, 186 deletions
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 0d4b5dcee3a..a62de0a8540 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -530,9 +530,10 @@ static int usb_uevent(struct device *dev, char **envp, int num_envp, /* driver is often null here; dev_dbg() would oops */ pr_debug ("usb %s: uevent\n", dev->bus_id); - if (is_usb_device(dev)) - return 0; - else { + if (is_usb_device(dev)) { + usb_dev = to_usb_device(dev); + alt = NULL; + } else { intf = to_usb_interface(dev); usb_dev = interface_to_usbdev(intf); alt = intf->cur_altsetting; @@ -579,15 +580,17 @@ static int usb_uevent(struct device *dev, char **envp, int num_envp, usb_dev->descriptor.bDeviceProtocol)) return -ENOMEM; - if (add_uevent_var(envp, num_envp, &i, + if (!is_usb_device(dev)) { + + if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, "INTERFACE=%d/%d/%d", alt->desc.bInterfaceClass, alt->desc.bInterfaceSubClass, alt->desc.bInterfaceProtocol)) - return -ENOMEM; + return -ENOMEM; - if (add_uevent_var(envp, num_envp, &i, + if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", le16_to_cpu(usb_dev->descriptor.idVendor), @@ -599,7 +602,8 @@ static int usb_uevent(struct device *dev, char **envp, int num_envp, alt->desc.bInterfaceClass, alt->desc.bInterfaceSubClass, alt->desc.bInterfaceProtocol)) - return -ENOMEM; + return -ENOMEM; + } envp[i] = NULL; @@ -747,31 +751,22 @@ EXPORT_SYMBOL_GPL_FUTURE(usb_deregister); #ifdef CONFIG_PM -static int verify_suspended(struct device *dev, void *unused) +static int usb_suspend(struct device *dev, pm_message_t message) { - if (dev->driver == NULL) - return 0; - return (dev->power.power_state.event == PM_EVENT_ON) ? -EBUSY : 0; -} + struct usb_device *udev; + struct usb_device_driver *udriver; + struct usb_interface *intf; + struct usb_driver *driver; + int status; -static int usb_generic_suspend(struct device *dev, pm_message_t message) -{ - struct usb_interface *intf; - struct usb_driver *driver; - int status; - - /* USB devices enter SUSPEND state through their hubs, but can be - * marked for FREEZE as soon as their children are already idled. - * But those semantics are useless, so we equate the two (sigh). - */ if (is_usb_device(dev)) { + if (dev->driver == NULL) + return 0; + udev = to_usb_device(dev); + udriver = to_usb_device_driver(dev->driver); if (dev->power.power_state.event == message.event) return 0; - /* we need to rule out bogus requests through sysfs */ - status = device_for_each_child(dev, NULL, verify_suspended); - if (status) - return status; - return usb_port_suspend(to_usb_device(dev)); + return udriver->suspend(udev, message); } if (dev->driver == NULL) @@ -799,12 +794,13 @@ static int usb_generic_suspend(struct device *dev, pm_message_t message) return status; } -static int usb_generic_resume(struct device *dev) +static int usb_resume(struct device *dev) { - struct usb_interface *intf; - struct usb_driver *driver; - struct usb_device *udev; - int status; + struct usb_device *udev; + struct usb_device_driver *udriver; + struct usb_interface *intf; + struct usb_driver *driver; + int status; if (dev->power.power_state.event == PM_EVENT_ON) return 0; @@ -814,10 +810,13 @@ static int usb_generic_resume(struct device *dev) /* devices resume through their hubs */ if (is_usb_device(dev)) { + if (dev->driver == NULL) + return 0; udev = to_usb_device(dev); + udriver = to_usb_device_driver(dev->driver); if (udev->state == USB_STATE_NOTATTACHED) return 0; - return usb_port_resume(udev); + return udriver->resume(udev); } if (dev->driver == NULL) { @@ -854,7 +853,7 @@ struct bus_type usb_bus_type = { .match = usb_device_match, .uevent = usb_uevent, #ifdef CONFIG_PM - .suspend = usb_generic_suspend, - .resume = usb_generic_resume, + .suspend = usb_suspend, + .resume = usb_resume, #endif }; diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index fa6f34a12b4..1522195de71 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -21,24 +21,208 @@ #include <linux/usb.h> #include "usb.h" +static inline const char *plural(int n) +{ + return (n == 1 ? "" : "s"); +} + +static int choose_configuration(struct usb_device *udev) +{ + int i; + int num_configs; + int insufficient_power = 0; + struct usb_host_config *c, *best; + + best = NULL; + c = udev->config; + num_configs = udev->descriptor.bNumConfigurations; + for (i = 0; i < num_configs; (i++, c++)) { + struct usb_interface_descriptor *desc = NULL; + + /* It's possible that a config has no interfaces! */ + if (c->desc.bNumInterfaces > 0) + desc = &c->intf_cache[0]->altsetting->desc; + + /* + * HP's USB bus-powered keyboard has only one configuration + * and it claims to be self-powered; other devices may have + * similar errors in their descriptors. If the next test + * were allowed to execute, such configurations would always + * be rejected and the devices would not work as expected. + * In the meantime, we run the risk of selecting a config + * that requires external power at a time when that power + * isn't available. It seems to be the lesser of two evils. + * + * Bugzilla #6448 reports a device that appears to crash + * when it receives a GET_DEVICE_STATUS request! We don't + * have any other way to tell whether a device is self-powered, + * but since we don't use that information anywhere but here, + * the call has been removed. + * + * Maybe the GET_DEVICE_STATUS call and the test below can + * be reinstated when device firmwares become more reliable. + * Don't hold your breath. + */ +#if 0 + /* Rule out self-powered configs for a bus-powered device */ + if (bus_powered && (c->desc.bmAttributes & + USB_CONFIG_ATT_SELFPOWER)) + continue; +#endif + + /* + * The next test may not be as effective as it should be. + * Some hubs have errors in their descriptor, claiming + * to be self-powered when they are really bus-powered. + * We will overestimate the amount of current such hubs + * make available for each port. + * + * This is a fairly benign sort of failure. It won't + * cause us to reject configurations that we should have + * accepted. + */ + + /* Rule out configs that draw too much bus current */ + if (c->desc.bMaxPower * 2 > udev->bus_mA) { + insufficient_power++; + continue; + } + + /* If the first config's first interface is COMM/2/0xff + * (MSFT RNDIS), rule it out unless Linux has host-side + * RNDIS support. */ + if (i == 0 && desc + && desc->bInterfaceClass == USB_CLASS_COMM + && desc->bInterfaceSubClass == 2 + && desc->bInterfaceProtocol == 0xff) { +#ifndef CONFIG_USB_NET_RNDIS_HOST + continue; +#else + best = c; +#endif + } + + /* From the remaining configs, choose the first one whose + * first interface is for a non-vendor-specific class. + * Reason: Linux is more likely to have a class driver + * than a vendor-specific driver. */ + else if (udev->descriptor.bDeviceClass != + USB_CLASS_VENDOR_SPEC && + (!desc || desc->bInterfaceClass != + USB_CLASS_VENDOR_SPEC)) { + best = c; + break; + } + + /* If all the remaining configs are vendor-specific, + * choose the first one. */ + else if (!best) + best = c; + } + + if (insufficient_power > 0) + dev_info(&udev->dev, "rejected %d configuration%s " + "due to insufficient available bus power\n", + insufficient_power, plural(insufficient_power)); + + if (best) { + i = best->desc.bConfigurationValue; + dev_info(&udev->dev, + "configuration #%d chosen from %d choice%s\n", + i, num_configs, plural(num_configs)); + } else { + i = -1; + dev_warn(&udev->dev, + "no configuration chosen from %d choice%s\n", + num_configs, plural(num_configs)); + } + return i; +} + static int generic_probe(struct usb_device *udev) { + int err, c; + + /* put device-specific files into sysfs */ + usb_create_sysfs_dev_files(udev); + + /* Choose and set the configuration. This registers the interfaces + * with the driver core and lets interface drivers bind to them. + */ + c = choose_configuration(udev); + if (c >= 0) { + err = usb_set_configuration(udev, c); + if (err) { + dev_err(&udev->dev, "can't set config #%d, error %d\n", + c, err); + /* This need not be fatal. The user can try to + * set other configurations. */ + } + } + + /* USB device state == configured ... usable */ + usb_notify_add_device(udev); + return 0; } + static void generic_disconnect(struct usb_device *udev) { + usb_notify_remove_device(udev); + /* if this is only an unbind, not a physical disconnect, then * unconfigure the device */ if (udev->state == USB_STATE_CONFIGURED) usb_set_configuration(udev, 0); + usb_remove_sysfs_dev_files(udev); + /* in case the call failed or the device was suspended */ if (udev->state >= USB_STATE_CONFIGURED) usb_disable_device(udev, 0); } +#ifdef CONFIG_PM + +static int verify_suspended(struct device *dev, void *unused) +{ + if (dev->driver == NULL) + return 0; + return (dev->power.power_state.event == PM_EVENT_ON) ? -EBUSY : 0; +} + +static int generic_suspend(struct usb_device *udev, pm_message_t msg) +{ + int status; + + /* rule out bogus requests through sysfs */ + status = device_for_each_child(&udev->dev, NULL, verify_suspended); + if (status) + return status; + + /* USB devices enter SUSPEND state through their hubs, but can be + * marked for FREEZE as soon as their children are already idled. + * But those semantics are useless, so we equate the two (sigh). + */ + return usb_port_suspend(udev); +} + +static int generic_resume(struct usb_device *udev) +{ + if (udev->state == USB_STATE_NOTATTACHED) + return 0; + + return usb_port_resume(udev); +} + +#endif /* CONFIG_PM */ + struct usb_device_driver usb_generic_driver = { .name = "usb", .probe = generic_probe, .disconnect = generic_disconnect, +#ifdef CONFIG_PM + .suspend = generic_suspend, + .resume = generic_resume, +#endif }; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b00514d9a60..a372332440b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1148,144 +1148,28 @@ void usb_disconnect(struct usb_device **pdev) * cleaning up all state associated with the current configuration * so that the hardware is now fully quiesced. */ + dev_dbg (&udev->dev, "unregistering device\n"); usb_disable_device(udev, 0); - usb_notify_remove_device(udev); + usb_unlock_device(udev); + + /* Unregister the device. The device driver is responsible + * for removing the device files from usbfs and sysfs and for + * de-configuring the device. + */ + device_del(&udev->dev); - /* Free the device number, remove the /proc/bus/usb entry and - * the sysfs attributes, and delete the parent's children[] + /* Free the device number and delete the parent's children[] * (or root_hub) pointer. */ - dev_dbg (&udev->dev, "unregistering device\n"); release_address(udev); - usb_remove_sysfs_dev_files(udev); /* Avoid races with recursively_mark_NOTATTACHED() */ spin_lock_irq(&device_state_lock); *pdev = NULL; spin_unlock_irq(&device_state_lock); - usb_unlock_device(udev); - - device_unregister(&udev->dev); -} - -static inline const char *plural(int n) -{ - return (n == 1 ? "" : "s"); -} - -static int choose_configuration(struct usb_device *udev) -{ - int i; - int num_configs; - int insufficient_power = 0; - struct usb_host_config *c, *best; - - best = NULL; - c = udev->config; - num_configs = udev->descriptor.bNumConfigurations; - for (i = 0; i < num_configs; (i++, c++)) { - struct usb_interface_descriptor *desc = NULL; - - /* It's possible that a config has no interfaces! */ - if (c->desc.bNumInterfaces > 0) - desc = &c->intf_cache[0]->altsetting->desc; - - /* - * HP's USB bus-powered keyboard has only one configuration - * and it claims to be self-powered; other devices may have - * similar errors in their descriptors. If the next test - * were allowed to execute, such configurations would always - * be rejected and the devices would not work as expected. - * In the meantime, we run the risk of selecting a config - * that requires external power at a time when that power - * isn't available. It seems to be the lesser of two evils. - * - * Bugzilla #6448 reports a device that appears to crash - * when it receives a GET_DEVICE_STATUS request! We don't - * have any other way to tell whether a device is self-powered, - * but since we don't use that information anywhere but here, - * the call has been removed. - * - * Maybe the GET_DEVICE_STATUS call and the test below can - * be reinstated when device firmwares become more reliable. - * Don't hold your breath. - */ -#if 0 - /* Rule out self-powered configs for a bus-powered device */ - if (bus_powered && (c->desc.bmAttributes & - USB_CONFIG_ATT_SELFPOWER)) - continue; -#endif - - /* - * The next test may not be as effective as it should be. - * Some hubs have errors in their descriptor, claiming - * to be self-powered when they are really bus-powered. - * We will overestimate the amount of current such hubs - * make available for each port. - * - * This is a fairly benign sort of failure. It won't - * cause us to reject configurations that we should have - * accepted. - */ - - /* Rule out configs that draw too much bus current */ - if (c->desc.bMaxPower * 2 > udev->bus_mA) { - insufficient_power++; - continue; - } - - /* If the first config's first interface is COMM/2/0xff - * (MSFT RNDIS), rule it out unless Linux has host-side - * RNDIS support. */ - if (i == 0 && desc - && desc->bInterfaceClass == USB_CLASS_COMM - && desc->bInterfaceSubClass == 2 - && desc->bInterfaceProtocol == 0xff) { -#ifndef CONFIG_USB_NET_RNDIS_HOST - continue; -#else - best = c; -#endif - } - - /* From the remaining configs, choose the first one whose - * first interface is for a non-vendor-specific class. - * Reason: Linux is more likely to have a class driver - * than a vendor-specific driver. */ - else if (udev->descriptor.bDeviceClass != - USB_CLASS_VENDOR_SPEC && - (!desc || desc->bInterfaceClass != - USB_CLASS_VENDOR_SPEC)) { - best = c; - break; - } - - /* If all the remaining configs are vendor-specific, - * choose the first one. */ - else if (!best) - best = c; - } - - if (insufficient_power > 0) - dev_info(&udev->dev, "rejected %d configuration%s " - "due to insufficient available bus power\n", - insufficient_power, plural(insufficient_power)); - - if (best) { - i = best->desc.bConfigurationValue; - dev_info(&udev->dev, - "configuration #%d chosen from %d choice%s\n", - i, num_configs, plural(num_configs)); - } else { - i = -1; - dev_warn(&udev->dev, - "no configuration chosen from %d choice%s\n", - num_configs, plural(num_configs)); - } - return i; + put_device(&udev->dev); } #ifdef DEBUG @@ -1328,7 +1212,6 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) int usb_new_device(struct usb_device *udev) { int err; - int c; err = usb_get_configuration(udev); if (err < 0) { @@ -1418,34 +1301,15 @@ int usb_new_device(struct usb_device *udev) } #endif - /* put device-specific files into sysfs */ + /* Register the device. The device driver is responsible + * for adding the device files to usbfs and sysfs and for + * configuring the device. + */ err = device_add (&udev->dev); if (err) { dev_err(&udev->dev, "can't device_add, error %d\n", err); goto fail; } - usb_create_sysfs_dev_files (udev); - - usb_lock_device(udev); - - /* choose and set the configuration. that registers the interfaces - * with the driver core, and lets usb device drivers bind to them. - */ - c = choose_configuration(udev); - if (c >= 0) { - err = usb_set_configuration(udev, c); - if (err) { - dev_err(&udev->dev, "can't set config #%d, error %d\n", - c, err); - /* This need not be fatal. The user can try to - * set other configurations. */ - } - } - - /* USB device state == configured ... usable */ - usb_notify_add_device(udev); - - usb_unlock_device(udev); return 0; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 6dfbc284369..9ebfc0fe819 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -205,7 +205,6 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) device_initialize(&dev->dev); dev->dev.bus = &usb_bus_type; dev->dev.dma_mask = bus->controller->dma_mask; - dev->dev.driver = &usb_generic_driver.drvwrap.driver; dev->dev.release = usb_release_dev; dev->state = USB_STATE_ATTACHED; |