aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/acpi/button.c3
-rw-r--r--drivers/acpi/processor_perflib.c5
-rw-r--r--drivers/acpi/sleep/main.c2
-rw-r--r--drivers/acpi/toshiba_acpi.c2
-rw-r--r--drivers/dma/ioat_dma.c7
-rw-r--r--drivers/idle/Kconfig11
-rw-r--r--drivers/idle/i7300_idle.c105
-rw-r--r--drivers/leds/leds-hp-disk.c2
-rw-r--r--drivers/pci/pci-acpi.c3
-rw-r--r--include/linux/i7300_idle.h83
10 files changed, 129 insertions, 94 deletions
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 9d568d417ea..cb046c3fc3f 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -262,6 +262,7 @@ static int acpi_lid_send_state(struct acpi_button *button)
return -ENODEV;
/* input layer checks if event is redundant */
input_report_switch(button->input, SW_LID, !state);
+ input_sync(button->input);
return 0;
}
@@ -285,8 +286,8 @@ static void acpi_button_notify(acpi_handle handle, u32 event, void *data)
input_report_key(input, keycode, 1);
input_sync(input);
input_report_key(input, keycode, 0);
+ input_sync(input);
}
- input_sync(input);
acpi_bus_generate_proc_event(button->device, event,
++button->pushed);
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index dc98f7a6f2c..dbcf260ea93 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -38,7 +38,10 @@
#include <asm/uaccess.h>
#endif
+
+#ifdef CONFIG_X86
#include <asm/cpufeature.h>
+#endif
#include <acpi/acpi_bus.h>
#include <acpi/processor.h>
@@ -360,11 +363,13 @@ static int acpi_processor_get_performance_info(struct acpi_processor *pr)
* the BIOS is older than the CPU and does not know its frequencies
*/
update_bios:
+#ifdef CONFIG_X86
if (ACPI_SUCCESS(acpi_get_handle(pr->handle, "_PPC", &handle))){
if(boot_cpu_has(X86_FEATURE_EST))
printk(KERN_WARNING FW_BUG "BIOS needs update for CPU "
"frequency support\n");
}
+#endif
return result;
}
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 26571bafb15..80c0868d048 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -163,6 +163,8 @@ static void acpi_pm_end(void)
acpi_target_sleep_state = ACPI_STATE_S0;
acpi_sleep_tts_switch(acpi_target_sleep_state);
}
+#else /* !CONFIG_ACPI_SLEEP */
+#define acpi_target_sleep_state ACPI_STATE_S0
#endif /* CONFIG_ACPI_SLEEP */
#ifdef CONFIG_SUSPEND
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 2a632f8b7a0..66aac06f2ac 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -371,6 +371,7 @@ static void bt_poll_rfkill(struct input_polled_dev *poll_dev)
RFKILL_STATE_HARD_BLOCKED);
input_report_switch(poll_dev->input, SW_RFKILL_ALL,
new_rfk_state);
+ input_sync(poll_dev->input);
}
}
@@ -842,6 +843,7 @@ static int __init toshiba_acpi_init(void)
set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
+ input_sync(toshiba_acpi.poll_dev->input);
ret = input_register_polled_device(toshiba_acpi.poll_dev);
if (ret) {
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index 43b8cefad2c..b0438c4f0c3 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -33,6 +33,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/workqueue.h>
+#include <linux/i7300_idle.h>
#include "ioatdma.h"
#include "ioatdma_registers.h"
#include "ioatdma_hw.h"
@@ -171,8 +172,10 @@ static int ioat_dma_enumerate_channels(struct ioatdma_device *device)
xfercap_scale = readb(device->reg_base + IOAT_XFERCAP_OFFSET);
xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale));
-#if CONFIG_I7300_IDLE_IOAT_CHANNEL
- device->common.chancnt--;
+#ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL
+ if (i7300_idle_platform_probe(NULL, NULL) == 0) {
+ device->common.chancnt--;
+ }
#endif
for (i = 0; i < device->common.chancnt; i++) {
ioat_chan = kzalloc(sizeof(*ioat_chan), GFP_KERNEL);
diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig
index f5b26dd579e..108264de0ac 100644
--- a/drivers/idle/Kconfig
+++ b/drivers/idle/Kconfig
@@ -5,12 +5,13 @@ config I7300_IDLE_IOAT_CHANNEL
bool
config I7300_IDLE
- tristate "Intel chipset idle power saving driver"
+ tristate "Intel chipset idle memory power saving driver"
select I7300_IDLE_IOAT_CHANNEL
- depends on X86_64
+ depends on X86_64 && EXPERIMENTAL
help
- Enable idle power savings with certain Intel server chipsets.
- The chipset must have I/O AT support, such as the Intel 7300.
- The power savings depends on the type and quantity of DRAM devices.
+ Enable memory power savings when idle with certain Intel server
+ chipsets. The chipset must have I/O AT support, such as the
+ Intel 7300. The power savings depends on the type and quantity of
+ DRAM devices.
endmenu
diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c
index 59d1bbc3cd3..fb176f6ef9f 100644
--- a/drivers/idle/i7300_idle.c
+++ b/drivers/idle/i7300_idle.c
@@ -25,6 +25,7 @@
#include <linux/delay.h>
#include <linux/debugfs.h>
#include <linux/stop_machine.h>
+#include <linux/i7300_idle.h>
#include <asm/idle.h>
@@ -34,6 +35,8 @@
#define I7300_IDLE_DRIVER_VERSION "1.55"
#define I7300_PRINT "i7300_idle:"
+#define MAX_STOP_RETRIES 10
+
static int debug;
module_param_named(debug, debug, uint, 0644);
MODULE_PARM_DESC(debug, "Enable debug printks in this driver");
@@ -46,12 +49,12 @@ MODULE_PARM_DESC(debug, "Enable debug printks in this driver");
* 0 = No throttling
* 1 = Throttle when > 4 activations per eval window (Maximum throttling)
* 2 = Throttle when > 8 activations
- * 168 = Throttle when > 168 activations (Minimum throttling)
+ * 168 = Throttle when > 672 activations (Minimum throttling)
*/
-#define MAX_THRTLWLIMIT 168
-static uint i7300_idle_thrtlowlm = 1;
-module_param_named(thrtlwlimit, i7300_idle_thrtlowlm, uint, 0644);
-MODULE_PARM_DESC(thrtlwlimit,
+#define MAX_THROTTLE_LOW_LIMIT 168
+static uint throttle_low_limit = 1;
+module_param_named(throttle_low_limit, throttle_low_limit, uint, 0644);
+MODULE_PARM_DESC(throttle_low_limit,
"Value for THRTLOWLM activation field "
"(0 = disable throttle, 1 = Max throttle, 168 = Min throttle)");
@@ -110,9 +113,9 @@ static int i7300_idle_ioat_start(void)
static void i7300_idle_ioat_stop(void)
{
int i;
- u8 sts;
+ u64 sts;
- for (i = 0; i < 5; i++) {
+ for (i = 0; i < MAX_STOP_RETRIES; i++) {
writeb(IOAT_CHANCMD_RESET,
ioat_chanbase + IOAT1_CHANCMD_OFFSET);
@@ -126,9 +129,10 @@ static void i7300_idle_ioat_stop(void)
}
- if (i == 5)
- dprintk("failed to suspend+reset I/O AT after 5 retries\n");
-
+ if (i == MAX_STOP_RETRIES) {
+ dprintk("failed to stop I/O AT after %d retries\n",
+ MAX_STOP_RETRIES);
+ }
}
/* Test I/O AT by copying 1024 byte from 2k to 1k */
@@ -275,7 +279,7 @@ static void __exit i7300_idle_ioat_exit(void)
i7300_idle_ioat_stop();
/* Wait for a while for the channel to halt before releasing */
- for (i = 0; i < 10; i++) {
+ for (i = 0; i < MAX_STOP_RETRIES; i++) {
writeb(IOAT_CHANCMD_RESET,
ioat_chanbase + IOAT1_CHANCMD_OFFSET);
@@ -389,9 +393,9 @@ static void i7300_idle_start(void)
new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT;
pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
- limit = i7300_idle_thrtlowlm;
- if (unlikely(limit > MAX_THRTLWLIMIT))
- limit = MAX_THRTLWLIMIT;
+ limit = throttle_low_limit;
+ if (unlikely(limit > MAX_THROTTLE_LOW_LIMIT))
+ limit = MAX_THROTTLE_LOW_LIMIT;
pci_write_config_byte(fbd_dev, DIMM_THRTLOW, limit);
@@ -440,7 +444,7 @@ static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val,
static ktime_t idle_begin_time;
static int time_init = 1;
- if (!i7300_idle_thrtlowlm)
+ if (!throttle_low_limit)
return 0;
if (unlikely(time_init)) {
@@ -505,77 +509,8 @@ static struct notifier_block i7300_idle_nb = {
.notifier_call = i7300_idle_notifier,
};
-/*
- * I/O AT controls (PCI bus 0 device 8 function 0)
- * DIMM controls (PCI bus 0 device 16 function 1)
- */
-#define IOAT_BUS 0
-#define IOAT_DEVFN PCI_DEVFN(8, 0)
-#define MEMCTL_BUS 0
-#define MEMCTL_DEVFN PCI_DEVFN(16, 1)
-
-struct fbd_ioat {
- unsigned int vendor;
- unsigned int ioat_dev;
-};
-
-/*
- * The i5000 chip-set has the same hooks as the i7300
- * but support is disabled by default because this driver
- * has not been validated on that platform.
- */
-#define SUPPORT_I5000 0
-
-static const struct fbd_ioat fbd_ioat_list[] = {
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB},
-#if SUPPORT_I5000
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT},
-#endif
- {0, 0}
-};
-
-/* table of devices that work with this driver */
-static const struct pci_device_id pci_tbl[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
-#if SUPPORT_I5000
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
-#endif
- { } /* Terminating entry */
-};
-
MODULE_DEVICE_TABLE(pci, pci_tbl);
-/* Check for known platforms with I/O-AT */
-static int __init i7300_idle_platform_probe(void)
-{
- int i;
-
- fbd_dev = pci_get_bus_and_slot(MEMCTL_BUS, MEMCTL_DEVFN);
- if (!fbd_dev)
- return -ENODEV;
-
- for (i = 0; pci_tbl[i].vendor != 0; i++) {
- if (fbd_dev->vendor == pci_tbl[i].vendor &&
- fbd_dev->device == pci_tbl[i].device) {
- break;
- }
- }
- if (pci_tbl[i].vendor == 0)
- return -ENODEV;
-
- ioat_dev = pci_get_bus_and_slot(IOAT_BUS, IOAT_DEVFN);
- if (!ioat_dev)
- return -ENODEV;
-
- for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
- if (ioat_dev->vendor == fbd_ioat_list[i].vendor &&
- ioat_dev->device == fbd_ioat_list[i].ioat_dev) {
- return 0;
- }
- }
- return -ENODEV;
-}
-
int stats_open_generic(struct inode *inode, struct file *fp)
{
fp->private_data = inode->i_private;
@@ -617,7 +552,7 @@ static int __init i7300_idle_init(void)
cpus_clear(idle_cpumask);
total_us = 0;
- if (i7300_idle_platform_probe())
+ if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev))
return -ENODEV;
if (i7300_idle_thrt_save())
diff --git a/drivers/leds/leds-hp-disk.c b/drivers/leds/leds-hp-disk.c
index 53a25b1c2da..74645ab1566 100644
--- a/drivers/leds/leds-hp-disk.c
+++ b/drivers/leds/leds-hp-disk.c
@@ -49,7 +49,7 @@ static struct acpi_hpled adev;
static acpi_status hpled_acpi_write(acpi_handle handle, int reg)
{
- unsigned long ret; /* Not used when writing */
+ unsigned long long ret; /* Not used when writing */
union acpi_object in_obj[1];
struct acpi_object_list args = { 1, in_obj };
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index dfe7c8e1b18..b3a63edb690 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -83,6 +83,9 @@ static acpi_status acpi_run_osc(acpi_handle handle,
if (ACPI_FAILURE(status))
return status;
+ if (!output.length)
+ return AE_NULL_OBJECT;
+
out_obj = output.pointer;
if (out_obj->type != ACPI_TYPE_BUFFER) {
printk(KERN_DEBUG "Evaluate _OSC returns wrong type\n");
diff --git a/include/linux/i7300_idle.h b/include/linux/i7300_idle.h
new file mode 100644
index 00000000000..05a80c44513
--- /dev/null
+++ b/include/linux/i7300_idle.h
@@ -0,0 +1,83 @@
+
+#ifndef I7300_IDLE_H
+#define I7300_IDLE_H
+
+#include <linux/pci.h>
+
+/*
+ * I/O AT controls (PCI bus 0 device 8 function 0)
+ * DIMM controls (PCI bus 0 device 16 function 1)
+ */
+#define IOAT_BUS 0
+#define IOAT_DEVFN PCI_DEVFN(8, 0)
+#define MEMCTL_BUS 0
+#define MEMCTL_DEVFN PCI_DEVFN(16, 1)
+
+struct fbd_ioat {
+ unsigned int vendor;
+ unsigned int ioat_dev;
+};
+
+/*
+ * The i5000 chip-set has the same hooks as the i7300
+ * but support is disabled by default because this driver
+ * has not been validated on that platform.
+ */
+#define SUPPORT_I5000 0
+
+static const struct fbd_ioat fbd_ioat_list[] = {
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB},
+#if SUPPORT_I5000
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT},
+#endif
+ {0, 0}
+};
+
+/* table of devices that work with this driver */
+static const struct pci_device_id pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
+#if SUPPORT_I5000
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
+#endif
+ { } /* Terminating entry */
+};
+
+/* Check for known platforms with I/O-AT */
+static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev,
+ struct pci_dev **ioat_dev)
+{
+ int i;
+ struct pci_dev *memdev, *dmadev;
+
+ memdev = pci_get_bus_and_slot(MEMCTL_BUS, MEMCTL_DEVFN);
+ if (!memdev)
+ return -ENODEV;
+
+ for (i = 0; pci_tbl[i].vendor != 0; i++) {
+ if (memdev->vendor == pci_tbl[i].vendor &&
+ memdev->device == pci_tbl[i].device) {
+ break;
+ }
+ }
+ if (pci_tbl[i].vendor == 0)
+ return -ENODEV;
+
+ dmadev = pci_get_bus_and_slot(IOAT_BUS, IOAT_DEVFN);
+ if (!dmadev)
+ return -ENODEV;
+
+ for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
+ if (dmadev->vendor == fbd_ioat_list[i].vendor &&
+ dmadev->device == fbd_ioat_list[i].ioat_dev) {
+ if (fbd_dev)
+ *fbd_dev = memdev;
+ if (ioat_dev)
+ *ioat_dev = dmadev;
+
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
+
+#endif