aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-realview/Makefile1
-rw-r--r--arch/arm/mach-realview/headsmp.S39
-rw-r--r--arch/arm/mach-realview/platsmp.c195
-rw-r--r--arch/arm/mm/proc-v6.S18
-rw-r--r--include/asm-arm/arch-realview/entry-macro.S14
-rw-r--r--include/asm-arm/arch-realview/platform.h1
-rw-r--r--include/asm-arm/arch-realview/smp.h31
-rw-r--r--include/asm-arm/hardware/arm_scu.h13
8 files changed, 312 insertions, 0 deletions
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 8d37ea1605f..011a85c1062 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -4,3 +4,4 @@
obj-y := core.o clock.o
obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S
new file mode 100644
index 00000000000..4075473cf68
--- /dev/null
+++ b/arch/arm/mach-realview/headsmp.S
@@ -0,0 +1,39 @@
+/*
+ * linux/arch/arm/mach-realview/headsmp.S
+ *
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __INIT
+
+/*
+ * Realview specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(realview_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #15
+ adr r4, 1f
+ ldmia r4, {r5, r6}
+ sub r4, r4, r5
+ add r6, r6, r4
+pen: ldr r7, [r6]
+ cmp r7, r0
+ bne pen
+
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
+1: .long .
+ .long pen_release
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
new file mode 100644
index 00000000000..9844644d0fb
--- /dev/null
+++ b/arch/arm/mach-realview/platsmp.c
@@ -0,0 +1,195 @@
+/*
+ * linux/arch/arm/mach-realview/platsmp.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/arm_scu.h>
+#include <asm/hardware.h>
+
+#include "core.h"
+
+extern void realview_secondary_startup(void);
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
+static unsigned int __init get_core_count(void)
+{
+ unsigned int ncores;
+
+ ncores = __raw_readl(IO_ADDRESS(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG);
+
+ return (ncores & 0x03) + 1;
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ /*
+ * the primary core may have used a "cross call" soft interrupt
+ * to get this processor out of WFI in the BootMonitor - make
+ * sure that we are no longer being sent this soft interrupt
+ */
+ smp_cross_call_done(cpumask_of_cpu(cpu));
+
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ pen_release = -1;
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * The secondary processor is waiting to be released from
+ * the holding pen - release it, then wait for it to flag
+ * that it has been released by resetting pen_release.
+ *
+ * Note that "pen_release" is the hardware CPU ID, whereas
+ * "cpu" is Linux's internal ID.
+ */
+ pen_release = cpu;
+ flush_cache_all();
+
+ /*
+ * XXX
+ *
+ * This is a later addition to the booting protocol: the
+ * bootMonitor now puts secondary cores into WFI, so
+ * poke_milo() no longer gets the cores moving; we need
+ * to send a soft interrupt to wake the secondary core.
+ * Use smp_cross_call() for this, since there's little
+ * point duplicating the code here
+ */
+ smp_cross_call(cpumask_of_cpu(cpu));
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ if (pen_release == -1)
+ break;
+
+ udelay(10);
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init poke_milo(void)
+{
+ extern void secondary_startup(void);
+
+ /* nobody is to be released from the pen yet */
+ pen_release = -1;
+
+ /*
+ * write the address of secondary startup into the system-wide
+ * flags register, then clear the bottom two bits, which is what
+ * BootMonitor is waiting for
+ */
+#if 1
+#define REALVIEW_SYS_FLAGSS_OFFSET 0x30
+ __raw_writel(virt_to_phys(realview_secondary_startup),
+ (IO_ADDRESS(REALVIEW_SYS_BASE) +
+ REALVIEW_SYS_FLAGSS_OFFSET));
+#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
+ __raw_writel(3,
+ (IO_ADDRESS(REALVIEW_SYS_BASE) +
+ REALVIEW_SYS_FLAGSC_OFFSET));
+#endif
+
+ mb();
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned int ncores = get_core_count();
+ unsigned int cpu = smp_processor_id();
+ int i;
+
+ /* sanity check */
+ if (ncores == 0) {
+ printk(KERN_ERR
+ "Realview: strange CM count of 0? Default to 1\n");
+
+ ncores = 1;
+ }
+
+ if (ncores > NR_CPUS) {
+ printk(KERN_WARNING
+ "Realview: no. of cores (%d) greater than configured "
+ "maximum of %d - clipping\n",
+ ncores, NR_CPUS);
+ ncores = NR_CPUS;
+ }
+
+ smp_store_cpu_info(cpu);
+
+ /*
+ * are we trying to boot more cores than exist?
+ */
+ if (max_cpus > ncores)
+ max_cpus = ncores;
+
+ /*
+ * Initialise the possible/present maps.
+ * cpu_possible_map describes the set of CPUs which may be present
+ * cpu_present_map describes the set of CPUs populated
+ */
+ for (i = 0; i < max_cpus; i++) {
+ cpu_set(i, cpu_possible_map);
+ cpu_set(i, cpu_present_map);
+ }
+
+ /*
+ * Do we need any more CPUs? If so, then let them know where
+ * to start. Note that, on modern versions of MILO, the "poke"
+ * doesn't actually do anything until each individual core is
+ * sent a soft interrupt to get it out of WFI
+ */
+ if (max_cpus > 1)
+ poke_milo();
+}
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index a39d8fa2ede..92f3ca31b7b 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -12,6 +12,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/hardware/arm_scu.h>
#include <asm/procinfo.h>
#include <asm/pgtable.h>
@@ -194,6 +195,23 @@ cpu_v6_name:
* - cache type register is implemented
*/
__v6_setup:
+#ifdef CONFIG_SMP
+ /* Set up the SCU on core 0 only */
+ mrc p15, 0, r0, c0, c0, 5 @ CPU core number
+ ands r0, r0, #15
+ moveq r0, #0x10000000 @ SCU_BASE
+ orreq r0, r0, #0x00100000
+ ldreq r5, [r0, #SCU_CTRL]
+ orreq r5, r5, #1
+ streq r5, [r0, #SCU_CTRL]
+
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+ mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode
+ orr r0, r0, #0x20
+ mcr p15, 0, r0, c1, c0, 1
+#endif
+#endif
+
mov r0, #0
mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S
index 2712ba77bb3..4df469bf42e 100644
--- a/include/asm-arm/arch-realview/entry-macro.S
+++ b/include/asm-arm/arch-realview/entry-macro.S
@@ -47,3 +47,17 @@
cmpcs \irqnr, \irqnr
.endm
+
+ /* We assume that irqstat (the raw value of the IRQ acknowledge
+ * register) is preserved from the macro above.
+ * If there is an IPI, we immediately signal end of interrupt on the
+ * controller, since this requires the original irqstat value which
+ * we won't easily be able to recreate later.
+ */
+
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #16
+ strcc \irqstat, [\base, #GIC_CPU_EOI]
+ cmpcs \irqnr, \irqnr
+ .endm
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
index 432260121c8..aef9b36b3c3 100644
--- a/include/asm-arm/arch-realview/platform.h
+++ b/include/asm-arm/arch-realview/platform.h
@@ -207,6 +207,7 @@
#define REALVIEW_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */
#define REALVIEW_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */
#else
+#define REALVIEW_MPCORE_SCU_BASE 0x10100000 /* SCU registers */
#define REALVIEW_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */
#define REALVIEW_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */
#endif
diff --git a/include/asm-arm/arch-realview/smp.h b/include/asm-arm/arch-realview/smp.h
new file mode 100644
index 00000000000..fc87783e8e8
--- /dev/null
+++ b/include/asm-arm/arch-realview/smp.h
@@ -0,0 +1,31 @@
+#ifndef ASMARM_ARCH_SMP_H
+#define ASMARM_ARCH_SMP_H
+
+#include <linux/config.h>
+
+#include <asm/hardware/gic.h>
+
+#define hard_smp_processor_id() \
+ ({ \
+ unsigned int cpunum; \
+ __asm__("mrc p15, 0, %0, c0, c0, 5" \
+ : "=r" (cpunum)); \
+ cpunum &= 0x0F; \
+ })
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(cpumask_t callmap)
+{
+ gic_raise_softirq(callmap, 1);
+}
+
+/*
+ * Do nothing on MPcore.
+ */
+static inline void smp_cross_call_done(cpumask_t callmap)
+{
+}
+
+#endif
diff --git a/include/asm-arm/hardware/arm_scu.h b/include/asm-arm/hardware/arm_scu.h
new file mode 100644
index 00000000000..9903f60c84b
--- /dev/null
+++ b/include/asm-arm/hardware/arm_scu.h
@@ -0,0 +1,13 @@
+#ifndef ASMARM_HARDWARE_ARM_SCU_H
+#define ASMARM_HARDWARE_ARM_SCU_H
+
+/*
+ * SCU registers
+ */
+#define SCU_CTRL 0x00
+#define SCU_CONFIG 0x04
+#define SCU_CPU_STATUS 0x08
+#define SCU_INVALIDATE 0x0c
+#define SCU_FPGA_REVISION 0x10
+
+#endif