aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/pci/hotplug/shpchp.h4
-rw-r--r--drivers/pci/hotplug/shpchp_ctrl.c20
-rw-r--r--drivers/pci/hotplug/shpchp_hpc.c32
3 files changed, 28 insertions, 28 deletions
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index 3ca6a4f574b..01d31a1f697 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -106,7 +106,7 @@ struct controller {
};
/* Define AMD SHPC ID */
-#define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
+#define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
#define PCI_DEVICE_ID_AMD_POGO_7458 0x7458
/* AMD PCIX bridge registers */
@@ -221,7 +221,7 @@ enum ctrl_offsets {
};
static inline struct slot *get_slot(struct hotplug_slot *hotplug_slot)
-{
+{
return hotplug_slot->private;
}
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index 6bb84734cd6..b746bd265bc 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -64,7 +64,7 @@ u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
/* Attention Button Change */
dbg("shpchp: Attention button interrupt received.\n");
-
+
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
@@ -128,7 +128,7 @@ u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
- /*
+ /*
* Save the presence state
*/
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
@@ -184,12 +184,12 @@ u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
return 1;
}
-/* The following routines constitute the bulk of the
+/* The following routines constitute the bulk of the
hotplug controller logic
*/
static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
enum pci_bus_speed speed)
-{
+{
int rc = 0;
dbg("%s: change to speed %d\n", __FUNCTION__, speed);
@@ -204,7 +204,7 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
u8 flag, enum pci_bus_speed asp, enum pci_bus_speed bsp,
enum pci_bus_speed msp)
-{
+{
int rc = 0;
/*
@@ -257,23 +257,23 @@ static int board_added(struct slot *p_slot)
err("%s: Failed to power on slot\n", __FUNCTION__);
return -1;
}
-
+
if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
if (slots_not_empty)
return WRONG_BUS_FREQUENCY;
-
+
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
return WRONG_BUS_FREQUENCY;
}
-
+
/* turn on board, blink green LED, turn off Amber LED */
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
return rc;
}
}
-
+
rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp);
if (rc) {
err("%s: Can't get adapter speed or bus mode mismatch\n",
@@ -378,7 +378,7 @@ static int remove_board(struct slot *p_slot)
err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
return rc;
}
-
+
rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
if (rc) {
err("%s: Issue of Set Attention command failed\n", __FUNCTION__);
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 7e9347eea5b..5183a45d45b 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -329,9 +329,9 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
++t_slot;
temp_word = (t_slot << 8) | (cmd & 0xFF);
dbg("%s: t_slot %x cmd %x\n", __FUNCTION__, t_slot, cmd);
-
+
/* To make sure the Controller Busy bit is 0 before we send out the
- * command.
+ * command.
*/
shpc_writew(ctrl, CMD, temp_word);
@@ -357,7 +357,7 @@ static int hpc_check_cmd_status(struct controller *ctrl)
{
int retval = 0;
u16 cmd_status = shpc_readw(ctrl, CMD_STATUS) & 0x000F;
-
+
switch (cmd_status >> 1) {
case 0:
retval = 0;
@@ -544,7 +544,7 @@ static int hpc_set_attention_status(struct slot *slot, u8 value)
u8 slot_cmd = 0;
switch (value) {
- case 0 :
+ case 0 :
slot_cmd = SET_ATTN_OFF; /* OFF */
break;
case 1:
@@ -735,7 +735,7 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
if (!intr_loc)
return IRQ_NONE;
- dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc);
+ dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc);
if(!shpchp_poll_mode) {
/*
@@ -748,12 +748,12 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
intr_loc2 = shpc_readl(ctrl, INTR_LOC);
- dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
+ dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
}
if (intr_loc & CMD_INTR_PENDING) {
- /*
- * Command Complete Interrupt Pending
+ /*
+ * Command Complete Interrupt Pending
* RO only - clear by writing 1 to the Command Completion
* Detect bit in Controller SERR-INT register
*/
@@ -767,7 +767,7 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
if (!(intr_loc & ~CMD_INTR_PENDING))
goto out;
- for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
+ for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
/* To find out which slot has interrupt pending */
if (!(intr_loc & SLOT_INTR_PENDING(hp_slot)))
continue;
@@ -799,7 +799,7 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
serr_int &= ~(GLOBAL_INTR_MASK | SERR_INTR_RSVDZ_MASK);
shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
}
-
+
return IRQ_HANDLED;
}
@@ -919,7 +919,7 @@ static struct hpc_ops shpchp_hpc_ops = {
.power_on_slot = hpc_power_on_slot,
.slot_enable = hpc_slot_enable,
.slot_disable = hpc_slot_disable,
- .set_bus_speed_mode = hpc_set_bus_speed_mode,
+ .set_bus_speed_mode = hpc_set_bus_speed_mode,
.set_attention_status = hpc_set_attention_status,
.get_power_status = hpc_get_power_status,
.get_attention_status = hpc_get_attention_status,
@@ -936,7 +936,7 @@ static struct hpc_ops shpchp_hpc_ops = {
.green_led_on = hpc_set_green_led_on,
.green_led_off = hpc_set_green_led_off,
.green_led_blink = hpc_set_green_led_blink,
-
+
.release_ctlr = hpc_release_ctlr,
};
@@ -993,9 +993,9 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
ctrl->mmio_size = 0x24 + 0x4 * num_slots;
}
- info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor,
+ info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor,
pdev->subsystem_device);
-
+
rc = pci_enable_device(pdev);
if (rc) {
err("%s: pci_enable_device failed\n", __FUNCTION__);
@@ -1057,7 +1057,7 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
slot_reg &= ~SLOT_REG_RSVDZ_MASK;
shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg);
}
-
+
if (shpchp_poll_mode) {
/* Install interrupt polling timer. Start with 10 sec delay */
init_timer(&ctrl->poll_timer);
@@ -1069,7 +1069,7 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
info("Can't get msi for the hotplug controller\n");
info("Use INTx for the hotplug controller\n");
}
-
+
rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
MY_NAME, (void *)ctrl);
dbg("%s: request_irq %d for hpc%d (returns %d)\n",